48 jobs found

A Dorset based food manufacturing company are looking to recruit a multi skilled Maintenance Engineer for their production facility based in the Poole / Bournemouth area. As a multi skilled Maintenance Engineer you will be part of a small team of shift engineers to provide engineering support to the production area and who are responsible for reactive and proactive maintenance of plant, equipment, and any auxiliary systems. The site is part of a group of sites/businesses across the UK who are on a significant path for growth and development and so opportunities to progress are very real. Role: Multi skilled, either electrically or mechanically biased will be considered Panama shifts Days and Nights (12 hour) 5 15 and 17.15 5.15 Opportunity to work in a modern food manufacturer Benefits: Salary of c£52k Subsidised canteen Onsite free parking Key responsibilities of Maintenance Engineer: Assist team to work towards maximum plant and equipment efficiency so downtime is minimised Ensure planned engineering tasks are delivered on time and in full Ensure good repair / manufacturing practices and procedures are followed Ensure completion of planned maintenance documents / CMMS Work closely with production staff to achieve daily targets Contribute to cost reduction initiatives to drive efficiency and process improvements Experience and skills required of Maintenance Engineer: Qualified maintenance engineer with C&G s or NVQ Level 3 or ideally ONC / HNC level Multi skilled, electrically biased with some mechanical skills / experience Apprenticeship trained Proactive attitude to solving issues and supporting production Manufacturing / production experience required To apply If you are an experienced multi skilled Maintenance Engineer looking for a new challenge at a great company please apply, or if you need further information please contact Stuart Cooper. Wagstaff Recruitment Building Trusted Relationships to Create Great Opportunities

Intralogistics Maintenance Engineer Location: Central Belt Scotland may need occasional travel outside of this area Pay rate - £35 - £40 per hour Shift Pattern: Panama Shift (12-hour shifts days and nights) About the Role We are seeking a skilled and proactive Multi-Skilled Maintenance Engineer to support our clients engineering team at various high-volume parcel sorting facilities. Operating within a fast-paced automated environment, you will be responsible for maintaining, troubleshooting, and improving a wide range of conveyor and material handling equipment that forms the backbone of the operation. We are looking to speak with both mechanically and electrically biased engineers who have experience of working with complex automated systems. Key Responsibilities Carry out planned preventative maintenance (PPM) on conveyor systems and associated equipment. Respond quickly and effectively to equipment breakdowns to minimise operational disruption. Diagnose electrical, mechanical, and control system faults. Maintain and repair motors, gearboxes, belts, rollers, sensors, scanners, and automated handling equipment. Support continuous improvement initiatives to enhance equipment reliability and performance. Ensure all maintenance activities are completed safely and in accordance with company procedures. Accurately record maintenance activities using the site's maintenance management system. Work closely with operations teams to ensure maximum system availability during peak periods. Participate in shift handovers and communicate equipment status effectively. About You We are looking for an engineer who can thrive in a busy automated environment and has a strong commitment to safety, reliability, and continuous improvement. Essential Requirements Recognised engineering qualification (Apprenticeship, NVQ Level 3, City & Guilds, HNC/HND or equivalent). Experience maintaining conveyor systems, automated material handling equipment, or intralogistics systems. Strong fault-finding skills across electrical and/or mechanical disciplines. Ability to work independently and make effective decisions under pressure. Good communication and teamwork skills. Comfortable working a Panama shift pattern, including days, nights, weekends, and public holidays. Desirable Experience Experience within parcel sorting, logistics, distribution, warehousing, or automated manufacturing environments. Any experience of ADTA s, Posisorter s or other sortation equipment would be highly beneficial but not essential. Knowledge of PLC-controlled systems and industrial automation. Understanding of condition-based maintenance and continuous improvement methodologies. On offer This role will be a field based position, covering multiple sites Panama shift rotation, days and nights Contract position likely to run until the end of the year with the potential to extend

Recruiting: Multi-Skilled Maintenance Engineer Location: Gainsborough Salary: 46-50k Shifts: Days only Our client, a leading food manufacturer, is looking to recruit a Multi-Skilled Maintenance Engineer to join their growing engineering team. Open to engineers from a variety of manufacturing backgrounds. While an electrical bias is preferred, mechanically biased engineers with strong fault-finding skills are also encouraged to apply. Key Responsibilities: - Planned preventative maintenance (PPM) - Reactive maintenance and fault finding - Supporting continuous improvement projects - Ensuring maximum machine uptime and reliability Requirements: - Level 3 Engineering qualification or equivalent - Previous manufacturing experience - Strong mechanical and/or electrical maintenance skills - Proactive approach and ability to work as part of a team This is a great opportunity to join a stable business that offers training, development and long-term career prospects. As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)

Maintenance Engineer Lutterworth, Leicestershire £47,000 Double Days (6am 2:30pm / 2:15pm 10:45pm) Mon Fri Benefits Mon Fri role only No weekends or nights involved 13% Combined Pension (6.5% Matched) 33 Days Holiday (25 Days Bank Holidays) Excellent autonomy and freedom on projects We are looking for a multi-skilled maintenance engineer with either an electrical bias to join our team of 3 maintenance engineers at our automated site in Lutterworth. All of our engineers have a minimum of 3 years service with the company, this is a highly autonomous role where a lot of trust and flexibility will be given for the right engineer, in line with our company values. Day to day you ll be responsible for planned and reactive maintenance of a fully automated distribution centre as well as site maintenance such as sprinkler systems, air conditioning, heating and general facilities maintenance. The Successful Engineer Minimum of 3 years maintenance experience within an industrial environment Ideally 60:40 electrical bias, multi skilled applicants or mechanically biased engineers with strong electrical competencies will also be considered Recognised Level 3 electrical qualification highly beneficial (City and Guilds, BTEC, NVQ, HNC) Comfortable working on their own for portion of the afternoon shifts Get in touch with Matt Morson at Stirling Warrington regarding this opportunity or any other maintenance opportunities in the Midlands. INDSW

Multi-Skilled Engineer (Food Manufacturing) Attleborough, Norfolk 53,000 Double Days Shift Pattern This is a family-owned food manufacturing business with a small, close-knit engineering team and none of the usual corporate noise. The engineering function is led by a strong Engineering Manager who knows what good looks like and gives people the space to get on with the job properly. They're not chasing a perfect CV. They're looking for a good engineer from a food or similar production background who wants to get stuck in and be part of a team that actually works together. What you'll be doing Carrying out planned preventative maintenance (PPM) across production equipment Responding to breakdowns and getting lines back up and running quickly Diagnosing and repairing electrical and mechanical faults Supporting continuous production and reducing downtime Working closely with production to resolve issues properly Completing maintenance records and supporting site systems Contributing to general improvement and reliability activity What we're looking for Multi-skilled engineering background Experience in food manufacturing or similar production environment Confident fault-finding across electrical and mechanical systems Experience with PPM and reactive maintenance Positive attitude and willingness to get involved Comfortable working within a small team where everyone pulls their weight Strong awareness of health and safety The reality of the role This is not a layered, process-heavy environment. It's a smaller site where people know each other, decisions happen quickly, and engineers are trusted to do their job without being buried in unnecessary systems. If you want structure, autonomy and a team that actually functions without politics, it's a good place to be. If you need corporate layers and endless sign-off processes, you'll find it a bit too straightforward.

Engineering Supervisor Market Dryaton £55,000 4 on / 4 off shift pattern Yolk Recruitment is supporting a high-volume manufacturing site in the Middlesbrough area with the appointment of an Engineering Supervisor to support the delivery of site engineering activities on a rotating 4 on / 4 off shift pattern. This role sits at the heart of the engineering function, providing hands-on leadership on shift while ensuring engineering standards, safety, and plant performance are maintained within a fast-paced production environment. The role As Engineering Supervisor, you will be responsible for the effective coordination and supervision of engineering activities on shift, including: Leading and coordinating a team of shift engineers to ensure maintenance tasks are delivered safely and efficiently Managing day-to-day engineering priorities, including planned work and unplanned breakdowns Acting as the first point of escalation for technical issues during the shift Supporting fault diagnosis and repairs across a range of production and site equipment Ensuring engineering work is completed to required safety, quality, and compliance standards Maintaining clear communication with production and site leadership teams Deputising for senior engineering leadership when required What you'll bring You'll be well suited to this role if you have: Experience supervising or stepping up within an engineering team in a manufacturing environment A strong multi-skilled maintenance background, covering both electrical and mechanical systems Confidence prioritising workloads and coordinating engineers in a time-critical setting A practical, hands-on approach with the ability to lead by example on shift A safety-first mindset with a focus on continuous improvement Formal engineering qualifications such as NVQ Level 3, HNC, or equivalent What's on offer £55,000 salary 4 on / 4 off shift pattern A key supervisory role within a busy, modern manufacturing site Ongoing investment in equipment, processes, and people The opportunity to develop leadership capability within a structured engineering team Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.

Mechanical Engineer Location: Northamptonshire Salary: £44,000 per annum + Overtime Job Type: Permanent, Full-Time Our client, a well-established and successful manufacturing business, is seeking an experienced Mechanical Engineer to join their engineering team in Northamptonshire. This is an excellent opportunity to secure a long-term position within a growing company that offers a competitive salary, regular overtime opportunities, and excellent benefits. The successful candidate will play a key role in maintaining production equipment, plant machinery, and site services to ensure maximum operational efficiency and reliability. Key Responsibilities Fault finding, servicing, and repair of production machinery and plant equipment Maintenance of machine drive mechanisms and rotating machinery Planned preventative maintenance (PPM) across production and process systems Maintenance and testing of plant services and site facilities Diagnosing and resolving mechanical faults efficiently Reading and interpreting mechanical drawings and technical documentation Supporting continuous improvement and reliability initiatives Ensuring all work is completed in accordance with health and safety procedures Requirements Recognised engineering qualification such as Apprenticeship, NVQ Level 3, BTEC, City & Guilds, or equivalent industry experience Proven experience within a manufacturing, production, or industrial maintenance environment Strong mechanical fault-finding and problem-solving skills Experience working with: oConveyors oElevators oGrinders oWeighing equipment oRotating machinery Ability to read and interpret mechanical engineering drawings Experience carrying out planned preventative maintenance activities Desirable Skills Multi-skilled engineer with mechanical bias and electrical fault-finding experience Pneumatics experience Previous experience within the food manufacturing industry Working Hours Monday to Friday 07:30 - 17:30 1-hour lunch break Daily overtime included: o7.5 hours paid at basic rate o1.5 hours paid at 1.5x overtime rate Following a successful probation period (maximum 6 months), engineers participate in an on-call rota, typically one week in six, with the option to work night shifts during call-out weeks. Please note: Applicants must be willing to participate in on-call rotas and work weekend overtime when required. Benefits Company Pension Cycle to Work Scheme Life Insurance On-Site Parking Overtime Opportunities Long-Term Career Development If you are an experienced Mechanical Engineer looking for a secure and rewarding opportunity within a successful manufacturing environment, we would like to hear from you.

Job Title: Maintenance Engineer Location: Coventry, UK Hours: Continental Shift (see job ad for details) Vacancy Type: Full-time and Permanent Salary: circa £45,000 base, subject to experience, plus £14,773 shift allowance, total £59,539 per year based on £45,000 Two Permanent Positions Continental Shift Coventry Immediate Start The continental shift starts in August. Join before then and you will start on a temporary non -continental shift pattern until the new shift goes live. The job This is a great opportunity for a multi-skilled Maintenance Engineer (mechanically or electrically bias) to broaden their skills and effectively manage a variety of maintenance responsibilities for a global armour technology manufacturer. You will be a valued member of the maintenance team responsible for the upkeep of the sites plant, equipment and buildings. We are looking for all levels of ability and experience within the maintenance skillset, whether your recently qualified or have been in the industry for many years we believe skills can be learnt, a positive can-do attitude is essential If you are up for a challenge and want to work for a fast paced and unique business that designs, manufactures, and integrates advanced protective products, then this is may the role for you! Do you want to know more about NPA? Visit our LinkedIn page and NPA Careers Page to find out more about us! Shift pattern This is a rotating continental shift pattern. You work 4 days on, then 4 days off, on 11.25-hour shifts. Shifts rotate between days and nights. Day shift: 6am to 6pm Two unpaid breaks: 30 minutes and 15 minutes Night shift: 6pm to 6am Two unpaid breaks: 30 minutes and 15 minutes Your rota will confirm whether you are on days or nights for each 4-day block. What you'll get in return At NP Aerospace, we know our success comes from our people. That s why we invest in benefits that support your health, reward your hard work, and help you grow your career: Performance rewards discretionary bonus opportunities Time to recharge: 247.5 hours per year, equivalent to 22 shifts per year Support for Defence two weeks paid leave for Reservists and Cadets, plus paid leave for Cadet Force Adult Volunteers (CFAVs) subject to approval Future security competitive pension scheme (9% combined employer/employee contributions) Peace of mind life cover at 3x base salary Health & wellbeing first BHSF Cash Healthcare Plan to support everyday health costs Grow with us career development and advancement opportunities within a global business Supportive environment a team culture built on innovation, collaboration, and purpose What you'll be doing The main responsibilities for the role will include: Service, maintain and repair plant, equipment and building services in line with planned preventative maintenance standards and procedures Respond to equipment breakdowns and carry out reactive maintenance to minimise downtime and support operational delivery Support site EHS compliance by ensuring maintenance activity is carried out safely and in line with company procedures Carry out machine tool changes, equipment modifications and practical engineering improvements Support the installation, commissioning and modification of new plant, machinery and production equipment Install and improve safety systems across plant, equipment and production areas Support the movement, layout change or reorganisation of production lines and work areas Install and modify services required to support site development and manufacturing improvements Assist with the implementation of changes to manufacturing processes, providing practical engineering input where required Produce and update work instructions for specific maintenance tasks and engineering activities Support contractors on site, ensuring work is completed safely and to the required standard Provide practical engineering support for improvement projects, operational changes and any other activities requiring maintenance or facilities input The above is not an exhaustive list of all duties and responsibilities required. Our team embraces modern technologies, including AI-assisted tools, to work smarter and deliver better results. Candidates should either have experience using AI tools or demonstrate a willingness to learn and apply them in their role. Experience We are looking for someone with strong practical maintenance experience, ideally gained within a fast paced manufacturing or production environment. You will bring a confident approach to fault finding, preventative maintenance and root cause analysis, with the ability to support both planned and reactive maintenance activity. Essential Time served experience as a multi skilled Maintenance Engineer Strong fault finding and root cause analysis skills Experience carrying out planned preventative maintenance within a busy manufacturing or production environment Good mechanical knowledge, including fluid power, hydraulics, pneumatics and steam systems Good electrical understanding, ideally including BS 7671 Experience supporting machine improvements, equipment modifications and process changes Good IT skills, including Microsoft Word and Excel Experience using AI tools, or a willingness to learn and apply AI in the role Desirable Experience working with compression moulding equipment Knowledge of waterjet cutting systems City & Guilds, HNC, ONC or equivalent engineering qualification Forklift truck licence MEWP licence What do we do at NP Aerospace? NP Aerospace is a global leader in armour technology manufacturing and vehicle integration, delivering high-performance, lifesaving solutions for the defence and security industry. Our mission is to improve and protect lives, and our vision is to be a leading provider of innovative solutions that solve our customers' complex challenges. Our values - Respect, Collaboration, Integrity, and Dedication form the bedrock of our culture. Our extensive range of combat-proven body armour, from ballistic helmets, plates, and shields to bomb disposal suits, highlights some of the most advanced composite materials. With a team of R&D engineers working on next-generation solutions, we also excel in highly engineered vehicle systems and armour platforms used by some of the world s largest defence organisations. Founded in 1926, NP Aerospace has served the defence industry for over 40 years, evolving into an agile and diverse company. Our Business Development team is expanding both in the UK and North America. Equal Opportunity Employer Statement: NP Aerospace is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We welcome applications from all qualified individuals, regardless of race, colour, national origin, gender, age, religion, disability, sexual orientation, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs. We are also fully committed to supporting the Defence Community and actively advertise roles on Defence specific platforms such as CTP, Force Families, Forces Employment Charity, and Veterans Job Board. Data Privacy: NP Aerospace respects the privacy of all applicants. Personal information provided during the application process will be treated in accordance with our privacy policy and applicable data protection laws. Please note: If successful, you will be required to sign the Official Secrets Act and successfully pass the necessary checks before you can begin your employment with NP Aerospace.

Maintenance Engineer 50,000 - 55,000 + Multi-skilled Training + Bonus + Overtime + Benefits Milton Keynes (Commutable from: Luton, Bedford, Northampton, Hitchin, Banbury, Brackley, Buckingham, Towcester, Bletchley) Are you a Maintenance Engineer looking to work in a purpose built and modern facility with continued training and highly competitive benefits? On offer is a great opportunity to technically progress your career whilst working within a friendly, stable and secure team of Engineers. This multi-million pound Manufacturer trade as experts within the Packaging sector. As a result they have an additional position available in the Maintenance team. Within this position you will be expected to fault find, repair and maintain a range of bespoke electro-mechanical production equipment at their large and modern facility. The shift pattern is a Panama with days and nights rotation. This role would suit a Maintenance Engineer looking to work on specialist controls systems, huge on target earnings and be in stable employment. The Role. Fault-find, repair and maintain a range of Electro-Mechanical equipment. Panama Shift pattern (2 on 2 off, 3 on, 3 off) Days and Nights rotation. PPM and breakdowns in a Production facility. The Person. Maintenance Engineer. Electrical, Mechanical, Multi-skilled, Dual-skilled. Manufacturing / FMCG environment preferred. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

ENGINEERING SUPERVISOR Job Title: Engineering Supervisor Location : Cranhill, Glasgow Salary: £48,000 - £54,000 Shift: 4 on 4 off Days Job Role of the Engineering Supervisor A fantastic opportunity which is not to be missed by a strong Engineering Supervisor or ambitious Team Leader has come to the forefront. This is an excellent opportunity to join a well-established manufacturing business and play a key role in leading the engineering function on site. They continue to invest in their people and equipment, making this a great opportunity for an engineer looking to progress their career into leadership. You will be responsible for supporting and supervising the engineering team, ensuring all planned, reactive and breakdown maintenance is completed effectively to maximise plant performance, reliability and safety. You will also provide hands-on support when required and help drive continuous improvement across the site. Sector FMCG Non-Negotiable Requirements of the Engineering Supervisor Multi-skilled maintenance experience with either an electrical or mechanical bias (up to 70/30 either way). Recognised engineering qualification. Previous Engineering Supervisor experience or a Team Leader looking to step up into a supervisory position. Requirements for the Engineering Supervisor Hands-on experience with pre-planned, reactive and breakdown maintenance within an industrial environment. Strong fault-finding skills. Experience working within a manufacturing environment. Ability to lead and support a team of engineers. Desirable Requirements for the Engineering Supervisor Experience working within FMCG manufacturing Continuous improvement experience. The Engineering Supervisor will benefit from: Working for a market-leading manufacturing business. Company benefits package including pension and additional employee benefits. Training and development opportunities. Excellent career progression prospects. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Adem Halil at Pioneer Selection on (phone number removed). As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you.

MAINTENANCE ENGINEER Job Title: Maintenance Engineer Location: Draycott, Gloucestershire Salary: £45,000 (OTE £52,000+) Shift: 4On 4Off Days and Nights Job Role of the Maintenance Engineer. A great opportunity has come to market for a Maintenance Engineer to join a company that consistently invests in its site, equipment, and engineering infrastructure, ensuring engineers can work with reliable machinery and modern systems. Over the last few years, the company has seen some significant growth which has led to the introduction of new lines and new infrastructure. The company want to keep investing into both the site and engineers to keep up with the success and growth of the business. You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery. Sector - Factory Maintenance Non-Negotiable Requirements of the Maintenance Engineer Multi-skilled maintenance experience within an industrial manufacturing environment. Engineering Qualification Requirements for the Maintenance Engineer Previous experience working as a Maintenance Engineer in the UK. Electrical or mechanical experience The Maintenance Engineer will benefit from: Working for a recognised business which is seeing good growth Excellent benefits package including pension, life insurance, and gym access. Training and development opportunities for engineers If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Antony Edwards at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Lead Multi-Skilled Engineer Location: Wakefield, W. Yorkshire Salary: Up to £60,000 + benefits Shifts: 4 days on, 4 off, 4 nights on, 4 off Morson are proud to be partnering with a leading UK food manufacturer to support the build of their new site in Wakefield. We re now looking for a Lead Engineer to join the engineering team, playing a key role in supporting plant reliability, leading shift-based engineering activity and helping shape the site as it ramps up. This is a great opportunity to step into a hands-on leadership role, where you ll not only support day-to-day engineering operations but also have real input into how the site performs longer term. The Role As Lead Engineer, you ll be a key part of the shift team, supporting a group of Multi-Skilled Engineers and ensuring all maintenance activity is delivered safely, efficiently and to a high standard. You ll be responsible for both planned and reactive maintenance, as well as coordinating engineering activity on shift and supporting overall site performance. Key Responsibilities Lead and support a team of shift-based engineers (typically 4 5 per shift) Ensure all maintenance activity is completed safely and in line with standards Allocate and prioritise tasks to maximise plant reliability and performance Support both planned (PPM) and reactive maintenance activities Ensure accurate recording of engineering activity via SAP / CMMS systems Manage contractor activity on shift, ensuring compliance with site procedures Maintain clear communication and handovers between shifts Support root cause analysis and continuous improvement activity Deputise for the Reliability Manager where required What We re Looking For Strong engineering background within FMCG or similar fast-paced environments Multi-skilled experience (mechanical and electrical) Previous experience leading or supporting engineering teams on shift Recognised engineering qualification (Apprenticeship / HNC / Degree or equivalent) Good understanding of health & safety and food safety standards (IOSH desirable) Experience using CMMS systems (SAP preferred) Strong problem-solving skills and a proactive approach to maintenance Why Apply Opportunity to join a new, growing site and play a key role from an early stage Hands-on leadership role with real responsibility and visibility across the site Chance to influence engineering standards, ways of working and team performance Backed by a well-established, stable business with long-term opportunities Competitive package including profit share, pension and additional benefits

Role: Multiskilled Maintenance Engineer Salary: up to £56,000 per annum Location: Gloucester / South Gloucestershire Shift Pattern: Double Days Monday to Friday Why This Opportunity Stands Out Excellent training and development opportunities Strong pension contribution Opportunity to work on new equipment and investment projects Great relationships with OEMs and ongoing technical development About the Company This business is a market-leading manufacturer with a turnover exceeding £50 million and a strong reputation for continuous improvement, innovation, and product development. Due to continued growth and increasing customer demand, they are expanding operations and investing significantly into new technology and production capabilities. It s an exciting time to join a company that values its engineers and offers both security and progression. This is an opportunity to join a highly respected business that is investing heavily in its future, including a £3.5 million new production line installation project, offering long-term stability, technical development, and genuine career progression. They are looking for an experienced engineer who wants to make an immediate impact within a forward-thinking and expanding business. The Role As a Multiskilled Maintenance Engineer, you ll play a key role in maintaining and improving site performance through both planned and reactive maintenance activities. Your responsibilities will include: Electrical fault finding and maintenance on production machinery Working with three-phase motors, sensors, relays, contactors, inverters, breakers, switches, and power supplies Reading and interpreting electrical schematics Using test equipment including multimeter for diagnostics and fault finding Mechanical maintenance including conveyors, rollers, bearings, pulleys, gearboxes, shafts, belts, pneumatic and hydraulic systems Supporting continuous improvement and equipment reliability projects Carrying out component replacements, strip-downs, and rebuild work where required To succeed in this role, you should have: A recognised engineering qualification (ideally Electrical) Proven maintenance experience in an industrial environment (e.g. FMCG, manufacturing, food & beverage, packaging, utilities) Strong electrical and mechanical fault-finding skills with a focus on root cause analysis PLC experience (advantageous but not essential) The ability to work independently and as part of a team ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Location; Leicester Are you a Maintenance Engineer looking for a better work-life balance without sacrificing technical challenge? Would you like to work a 4-day working week with no weekends , while maintaining and improving advanced CNC machinery, robotic cells and automated manufacturing equipment? We are working with a leading aerospace manufacturing business in Leicester that is continuing to grow following increased customer demand and investment across the site. As a result, the engineering team is expanding and looking to recruit two Maintenance Engineers to support ongoing production and future growth. This is an excellent opportunity for either an electrically biased or mechanically biased engineer who enjoys fault finding, problem solving and working on technically advanced equipment. The site operates a wide range of CNC machinery, automation systems and robotic cells, ensuring no two days are the same. The engineering team has built a strong reputation across the business and plays a key role in maintaining production performance, driving continuous improvement and supporting future investment projects. Whether you come from aerospace, automotive, manufacturing, precision engineering or another industrial environment, if you enjoy working on complex machinery and want a role offering genuine work-life balance, we'd love to hear from you. Responsibilities of a Maintenance Engineer: Carry out planned preventative maintenance across CNC machinery, tooling equipment and robotic cells Respond to machine breakdowns and facility issues to minimise downtime Diagnose and repair electrical, mechanical, hydraulic and pneumatic faults Support continuous improvement and reliability projects across the site Assist with machinery upgrades, installations and engineering improvements Work closely with production teams to maximise equipment performance Support health, safety and facility improvement initiatives Liaise with contractors and external suppliers where required Maintain accurate maintenance records and engineering documentation Skills & Qualifications of a Maintenance Engineer: Apprentice trained engineer or NVQ Level 3 qualified Strong maintenance experience within manufacturing or industrial environments Electrically biased or mechanically biased engineers will be considered Experience fault finding on production machinery Knowledge of CNC machinery, automation systems or robotics advantageous Understanding of hydraulics, pneumatics and industrial drives Strong problem-solving and diagnostic skills 18th Edition qualification advantageous but not essential Mechanical experience such as spindle rebuilds, bearings or precision engineering repairs advantageous Benefits of a Maintenance Engineer: Salary: £48,300 Opportunity to increase earnings to £50,200 within 12 months 4-day working week No weekend working Rotating 3-shift pattern: Tuesday Friday: 06 30 Monday Thursday: 12 00 Monday Thursday: 21 00 Quarterly bonus scheme Overtime available paid at 1.5x 2x Company pension scheme Cycle to Work scheme Employee discount programme Health and wellbeing support Company sick pay Free onsite parking Stable aerospace manufacturing environment with continued investment If you feel this Maintenance Engineer role is right for you, please contact Emma Devereux at Maintech Recruitment for more information or click apply. Please note this client is unable to offer sponsorship; you will require full rights to work in the UK. Maintech Recruitment Engineering Great Careers Maintech Recruitment are an equal opportunities agency and welcome applications from all suitably qualified persons regardless of sex, religion, belief, political opinion, race, age, sexual orientation, marital status or disability. Please note by applying for this role your data will be processed and stored in line with our privacy policy, full details of which are available on our website.

Multi-Skilled, Electrically Biased Maintenance Engineer (Rotating Shift Pattern) Site based role commutable from Redditch, Bromsgrove, Worcester, Droitwich Spa, Alcester, Studley, and South Birmingham 46,000 + Shift Premium & Flexibility Allowance (up to an additional 5,800 per annum) + OTE 51,000 + Rotating Shift Pattern (Mornings, Afternoons and Nights) + Monday to Friday + Flexi Hours Scheme + Site Bonus (Performance Dependent) Are you an electrically biased Maintenance Engineer looking to maximise your earnings while developing your skills within a global market leading manufacturing organisation? This is an excellent opportunity to join a world-leading glass manufacturing company offering long-term stability, structured training and the chance to work in a highly automated automotive production environment. You will work within a skilled engineering team carrying out reactive and planned maintenance across advanced process plant equipment critical to production. The role is electrically focused, with strong exposure to mechanical systems, PLCs, robotics and continuous improvement projects. Alongside your day-to-day maintenance duties, you will have the opportunity to expand your capabilities in mechanical maintenance, fabrication, welding and project engineering, enabling you to become a more complete, multi-skilled engineer. With additional shift premiums, flexibility allowance and a site performance bonus, engineers have excellent opportunities to significantly increase annual earnings on top of an already competitive basic salary. This role suits an electrically biased Maintenance Engineer from automotive, manufacturing or industrial backgrounds who wants secure long-term employment, strong earning potential and the opportunity to further develop into a highly skilled multi-disciplinary engineer. The Role: Electrical-biased maintenance within a highly automated manufacturing facility Reactive and planned maintenance on process plant and production equipment Working on PLCs (Allen-Bradley), ABB robotics, hydraulics, pneumatics and material delivery systems Rotating shift pattern covering mornings, afternoons and nights (38 hours per week, Monday to Friday) The Person: Electrically biased Maintenance Engineer Level 3 NVQ Electrical Apprenticeship Qualification Strong mechanical background Experience with PLCs and industrial automation systems Background in manufacturing or industrial environments Fabrication and welding skills advantageous HNC, HND or BEng (Hons) preferred Reference Number: BBBH (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Eve Terry at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Multi-Skilled Maintenance Engineer (Electrical) Location: Leeds Salary range:up to 65,000 + Benefits (depends on level of experience) Working hours: 12-hour shifts (days and nights) - 4 on 4 off Permanent contract Please note: Sponsorship is not available for this role. The Role As a Maintenance Engineer, you will be responsible for ensuring the reliability and performance of production equipment by carrying out planned and reactive maintenance activities. You will work closely with operations teams to minimise downtime and improve machine performance. An exciting opportunity has arisen to join a large, well-established manufacturing business with modern facilities in the Leeds area offering career progression opportunities and PLC training. Due to expansion and increased staffing across shift teams, we are currently recruiting 05 Maintenance Engineers to support operations within a highly automated production environment. Key Responsibilities Perform planned preventative maintenance (PPM) and reactive maintenance on production equipment Diagnose and resolve mechanical and electrical faults Work with automated and PLC-controlled machinery Support continuous improvement initiatives across the site Ensure all maintenance work is completed safely and in line with company standards Collaborate with engineering and production teams to maximise equipment reliability Requirements Experience working in a large manufacturing or industrial environment with complex machinery Multi-skilled maintenance background (electrical) Candidates with strong mechanical experience and an electrical qualification are also encouraged to apply Experience with PLC systems would be highly advantageous Relevant engineering qualification (Apprenticeship, NVQ, HNC/HND or equivalent) Benefits Pension matching up to 6% 12-hour shifts (days and nights) Opportunity for overtime Potential relocation support available for the right candidate Interested in this role? Send your CV to Luana Ferreira at (url removed) or call her on (phone number removed). Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Your new company We are seeking two qualified Mechanical Engineers to join a busy team, working within commercial building services, facilities management (FM), or critical environments. This is an excellent opportunity for experienced engineers who are confident carrying out both planned and reactive maintenance while contributing to a high-performing engineering team. Initial Training Period: Monday to Friday, 08:00 - 17:00 (first 2 weeks) After Training (Rotating Shift Pattern): 06:30 - 15:00 13:30 - 22:00 Your new role Carry out planned preventative maintenance (PPM) and reactive maintenance tasks Maintain and repair mechanical systems and plant equipment Ensure all work is completed in line with health & safety standards and compliance regulations Diagnose faults and carry out effective repairs Support the smooth running of building services systems Work independently and collaboratively within a team environment Contribute to continuous improvement and multi-skilled engineering practices What you'll need to succeed Qualified Mechanical Engineer with relevant NVQ / City & Guilds qualifications Proven experience within commercial building services, FM, or critical environments Strong knowledge of at least one of the following: HVAC systems Mechanical plant Water systems Gas systems What you'll get in return Stable, full-time positions Opportunity to work in a professional and supportive engineering environment Career development and multi-skilled progression opportunities Competitive salary and benefits package What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

MULTI-SKILLED MAINTENANCE ENGINEER Job Title: Multi Skilled Maintenance Engineer Location: Wisbech Salary: £44-47,(Apply online only). Shift: Days - 8:00am-5:00pm (9-hour shifts) Job Role of the Multi Skilled Maintenance Engineer A fantastic opportunity has arisen for a Multi Skilled Maintenance Engineer to join a market-leading FMCG manufacturer operating highly automated production and packaging equipment. This is a day-based position within a close-knit and high-performing engineering team. The business invests heavily in its people and technology, offering engineers autonomy, project exposure and the chance to work on continuous improvement initiatives including robotics projects. The successful Multi Skilled Maintenance Engineer will be responsible for maintaining and improving production machinery and site services, supporting both planned preventative maintenance and reactive breakdown activities across the site. This is a business where Multi Skilled Maintenance Engineers are trusted to self-organise - you will not be micromanaged and will be expected to take ownership of your work. Sector - FMCG Manufacturing Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer Multi Skilled Maintenance Experience within a manufacturing environment. Engineering Qualification Hands-on experience with both pre-planned, reactive, and breakdown maintenance Strong fault-finding and diagnostic ability Requirements for the Multi Skilled Maintenance Engineer Experience maintaining automated machinery Experience working on electrical and mechanical faults Desirable Requirements for the Multi Skilled Maintenance Engineer Food manufacturing experience Experience supporting robotics projects PLC fault finding experience Ability to carry out overhauls and continuous improvement project work The Multi Skilled Maintenance Engineer Will Benefit From: Salary up to £47,(Apply online only) Working for a stable, growing FMCG manufacturer Day-based shift pattern Exposure to project and continuous improvement work Supportive and high-performing engineering team Overtime opportunities Additional Information No holidays can be taken in December due to peak production. The team is close-knit, high energy and passionate about driving and maintaining engineering standards. This role would suit someone who takes pride in their work and thrives in a collaborative, hardworking environment. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Savannah Wells at Pioneer Selection - (url removed) / (phone number removed) As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Single Skilled Engineer Thrapston 5 on, 4 off (Days/Nights Rotation) Ever worked on a site where everything is fine right up until the exact moment it is absolutely not fine? This is that kind of place. Fast-paced FMCG manufacturing. High output. Constant changeovers. Machinery that does not care about your plans, your break, or your optimism. If it goes down, it goes down loudly and usually at the worst possible moment. Package: 6 weeks holiday including bank holidays 15% discount from day one Additional discount card for a friend or family member Market leading pension and life assurance Subsidised canteen Free parking Healthcare support including digital GP access Retail, gym and leisure discounts Enhanced family friendly policies Long service recognition and career development opportunities This is a hands-on maintenance role focused on tooling systems across multiple production lines. Less theory. More fixing things under pressure while production waits for you to be a hero. What you will be doing You will be the person who keeps production from turning into a very expensive standstill. Carry out planned inspections and preventative maintenance on tooling systems Jump on breakdowns and get lines back up before downtime becomes a problem with numbers attached to it Support fast changeovers and line adjustments to keep production moving Diagnose faults on mechanical and electrical systems without needing a full committee meeting first Calibrate and fine-tune equipment so it actually does what it is supposed to do Work closely with production to remove repeat issues and reduce downtime Keep maintenance records up to date, because someone will ask eventually Work safely, even when everything around you is trying its best not to be Stay ahead of equipment issues instead of waiting for them to announce themselves loudly What you need to bring If you can already fix things properly, you will be fine. If you like guessing, you will suffer. NVQ Level 3 or equivalent in Mechanical or Electrical Engineering Solid experience in FMCG or fast-moving production environments Strong fault-finding skills on industrial machinery and tooling systems Confident working under pressure when lines are down and everyone is watching Ability to make decisions without overthinking them into paralysis Practical, proactive mindset focused on uptime and reliability Good communication with engineers and production teams Someone who actually enjoys solving problems rather than just logging them Shift pattern 5 on, 4 off rotating 3 weeks days (06:00-18:00) 1 week nights (18:00-06:00) The reality This is proper engineering. Not monitoring screens and hoping for the best. You will be fixing, adjusting, improving and occasionally firefighting when production decides today is the day everything changes at once.

Position: Multi-Skilled Maintenance Engineer Salary: 50,000 Shift: Monday - Friday (06:00-15:00) Location: Worcestershire (Commutable from Worcester, Gloucester, Evesham, Cheltenham, Redditch and surrounding areas) Zest are working closely with a reputable and successful food manufacturer looking to expand its team due to internal growth and investment within the business! This is a fantastic opportunity to leave those night shifts behind and join a highly experienced maintenance team that puts their engineers first! Main Responsibilities Carry out maintenance and repair on mechanical and electrical equipment to ensure optimal plant performance. Perform root cause analysis on component failures and implement improvement measures. Respond to and resolve electrical and mechanical breakdowns, including fault-finding. Ensure compliance with food safety and hygiene standards. Plan and execute small-scale engineering projects. Specify and source replacement parts and equipment. What we are looking for: Strong electrical & mechanical knowledge, preferably within food manufacturing Clear and confident communication abilities. Ability to work independently and within a team City & Guilds qualified or time-served multi-skilled engineer. Knowledge of PLC systems is advantageous. Fabrication and welding experience is beneficial. Proven experience in multi-skilled engineering roles. If you are interested in the position, click 'Apply' or contact George for a confidential discussion (phone number removed) / (url removed) Similar roles include, maintenance technician, mechanical engineer, electrical engineer, As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)