Vehicle Fitter Long-term contract until December 2027 Hours: Monday to Friday (Days) 7:30am 3:30pm (40-hour week) We re on the lookout for a Vehicle Fitter with strong hands-on experience. If you ve worked on vehicle, bogie, or rail overhauls involving stripping and rebuilding, this could be a great fit. Vehicle Fitter Role Full mechanical fitting experience Experience in large fitting environments (coach/vehicle builds) Reading and interpreting engineering drawings and schematics Using hand and power tools for cutting, folding, and fitting Quality checking builds for alignment and accuracy Following Health & Safety procedures and maintaining a safe workspace What You ll Need as a Vehicle Fitter Proven experience as a Vehicle Fitter in a fast-paced or technical environment Strong ability to read and work from technical drawings Confident using a wide range of hand and power tools Problem-solver with a sharp eye for detail Experience in vehicle fitting Background in Aviation, Military, Marine, or similar sectors is an advantage Ability to read basic electrical schematics is a bonus Vehicle Fitter Pay Long-term contract PAYE: £20.05ph Umbrella: £27.34ph Apply now for the Vehicle Fitter role! INDMAN
Jun 24, 2026
Contractor
Vehicle Fitter Long-term contract until December 2027 Hours: Monday to Friday (Days) 7:30am 3:30pm (40-hour week) We re on the lookout for a Vehicle Fitter with strong hands-on experience. If you ve worked on vehicle, bogie, or rail overhauls involving stripping and rebuilding, this could be a great fit. Vehicle Fitter Role Full mechanical fitting experience Experience in large fitting environments (coach/vehicle builds) Reading and interpreting engineering drawings and schematics Using hand and power tools for cutting, folding, and fitting Quality checking builds for alignment and accuracy Following Health & Safety procedures and maintaining a safe workspace What You ll Need as a Vehicle Fitter Proven experience as a Vehicle Fitter in a fast-paced or technical environment Strong ability to read and work from technical drawings Confident using a wide range of hand and power tools Problem-solver with a sharp eye for detail Experience in vehicle fitting Background in Aviation, Military, Marine, or similar sectors is an advantage Ability to read basic electrical schematics is a bonus Vehicle Fitter Pay Long-term contract PAYE: £20.05ph Umbrella: £27.34ph Apply now for the Vehicle Fitter role! INDMAN
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 26th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 24, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 26th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Workshop Technician (Full Industry Training)£28,000 - £30,000 + Great Training + Monday to Friday + Overtime Workshop based in Nelson. Commutable from Bradford, Blackburn, Rochdale, Burnley, Skipton, Preston, Keighley and surrounding areas Are you a highly motivated person from an Engineering background and looking to join a growing market leader, who will develop your skills through specialist internal and OEM training, offer progression into being a technical expert all whilst maintaining a great work life balance?On offer is a varied and interesting position, where you will play a key role within a company that truly invests in its staff.This company are a long standing market leader within the care equipment industry, having had a very successful few years they are going through an exciting period of growth and looking to expand the team.The role is a Monday to Friday workshop based role. You will be required to assist in the Mechanical and Electrical repair of equipment. There is great training so any Engineering backgrounds are encouraged to apply.This role is ideal for someone looking to join a long standing market leader offering great training, progression opportunities and a great work life balance. The Role: Electrical and Mechanical repair of equipment Monday to Friday - 8.30am - 5pm Specialist internal and external training (including OEM) The Person: Highly motivated to develop skills Some experience within Engineering Mechanical, Electical, Mechanics, Electrics, Fitter, Assembler, Pumps, Gearboxes, Gear Boxes, Motors, fitting, Apprentice, NVQ, NVQ LVL 3, HND, HNC, Bradford, Blackburn, Rochdale, Burnley, Skipton, Preston, Keighley Reference Number: To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harvey Wayman at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Jun 23, 2026
Full time
Workshop Technician (Full Industry Training)£28,000 - £30,000 + Great Training + Monday to Friday + Overtime Workshop based in Nelson. Commutable from Bradford, Blackburn, Rochdale, Burnley, Skipton, Preston, Keighley and surrounding areas Are you a highly motivated person from an Engineering background and looking to join a growing market leader, who will develop your skills through specialist internal and OEM training, offer progression into being a technical expert all whilst maintaining a great work life balance?On offer is a varied and interesting position, where you will play a key role within a company that truly invests in its staff.This company are a long standing market leader within the care equipment industry, having had a very successful few years they are going through an exciting period of growth and looking to expand the team.The role is a Monday to Friday workshop based role. You will be required to assist in the Mechanical and Electrical repair of equipment. There is great training so any Engineering backgrounds are encouraged to apply.This role is ideal for someone looking to join a long standing market leader offering great training, progression opportunities and a great work life balance. The Role: Electrical and Mechanical repair of equipment Monday to Friday - 8.30am - 5pm Specialist internal and external training (including OEM) The Person: Highly motivated to develop skills Some experience within Engineering Mechanical, Electical, Mechanics, Electrics, Fitter, Assembler, Pumps, Gearboxes, Gear Boxes, Motors, fitting, Apprentice, NVQ, NVQ LVL 3, HND, HNC, Bradford, Blackburn, Rochdale, Burnley, Skipton, Preston, Keighley Reference Number: To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harvey Wayman at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Pipefitter Location: Glasgow (Onsite) Must be able to attend a Trades Test onsite in Glasgow Shift Pattern: Days: Monday-Thursday, 07:00-16:30 Nights: Monday-Thursday, 20:30-06:00 Weekends: Friday-Sunday, 07:00-19:30 Requirements: Modern Apprenticeship or Trade Papers must be provided upon application. About the Role This is an opportunity to join a skilled engineering and manufacturing environment where you'll contribute to the fabrication and installation of high-quality pipework systems. Working on complex, large-scale projects, you'll play a key role in ensuring systems are built to precise standards while maintaining safety and quality at all times. Key Responsibilities Fabricate and install pipework systems, including large and small-bore pipework using materials such as copper, cu-ni, carbon steel, and stainless steel Use a range of hand tools and mechanical equipment to cut, bend, and weld pipes Install onboard utilities including sinks, showers, and toilets Install and assemble fittings, valves, and associated components in line with engineering drawings and specifications Collaborate with other trades to ensure projects are completed accurately and on schedule Follow all safety regulations and company procedures Maintain accurate records of all work completed Core Skills & Experience Completion of a Modern Apprenticeship or possession of Trade Papers (SVQ3, City & Guilds, or equivalent qualification) Proven experience in pipe manufacture and installation on large-scale or industrial projects Strong knowledge of pipefitting techniques, methods, and safe working practices Ability to read and interpret engineering drawings, pipework diagrams, and technical specifications Understanding of SHE, COSHH, and risk assessment requirements, with a consistent safety-first approach Previous experience working as a Pipefitter (or similar trade) within industrial or commercial environments The Team You'll be part of a highly skilled pipefitting team responsible for delivering essential pipework systems within a major shipbuilding environment on the Clyde. The team combines precision, craftsmanship, and strong safety practices to deliver reliable, high-quality work on complex engineering projects. This is a hands-on environment where pride in workmanship and attention to detail are highly valued. What's on Offer Competitive salary with shift allowances Opportunities for career development and progression Ongoing training and skills development Supportive team environment focused on quality and safety The chance to work on large-scale, technically advanced engineering projects Diversity & Inclusion We are committed to building an inclusive workplace where everyone feels valued and supported. A diverse range of perspectives and experiences strengthens our teams and contributes to better outcomes. Please get in contact for more details and an open chat!
Jun 23, 2026
Full time
Pipefitter Location: Glasgow (Onsite) Must be able to attend a Trades Test onsite in Glasgow Shift Pattern: Days: Monday-Thursday, 07:00-16:30 Nights: Monday-Thursday, 20:30-06:00 Weekends: Friday-Sunday, 07:00-19:30 Requirements: Modern Apprenticeship or Trade Papers must be provided upon application. About the Role This is an opportunity to join a skilled engineering and manufacturing environment where you'll contribute to the fabrication and installation of high-quality pipework systems. Working on complex, large-scale projects, you'll play a key role in ensuring systems are built to precise standards while maintaining safety and quality at all times. Key Responsibilities Fabricate and install pipework systems, including large and small-bore pipework using materials such as copper, cu-ni, carbon steel, and stainless steel Use a range of hand tools and mechanical equipment to cut, bend, and weld pipes Install onboard utilities including sinks, showers, and toilets Install and assemble fittings, valves, and associated components in line with engineering drawings and specifications Collaborate with other trades to ensure projects are completed accurately and on schedule Follow all safety regulations and company procedures Maintain accurate records of all work completed Core Skills & Experience Completion of a Modern Apprenticeship or possession of Trade Papers (SVQ3, City & Guilds, or equivalent qualification) Proven experience in pipe manufacture and installation on large-scale or industrial projects Strong knowledge of pipefitting techniques, methods, and safe working practices Ability to read and interpret engineering drawings, pipework diagrams, and technical specifications Understanding of SHE, COSHH, and risk assessment requirements, with a consistent safety-first approach Previous experience working as a Pipefitter (or similar trade) within industrial or commercial environments The Team You'll be part of a highly skilled pipefitting team responsible for delivering essential pipework systems within a major shipbuilding environment on the Clyde. The team combines precision, craftsmanship, and strong safety practices to deliver reliable, high-quality work on complex engineering projects. This is a hands-on environment where pride in workmanship and attention to detail are highly valued. What's on Offer Competitive salary with shift allowances Opportunities for career development and progression Ongoing training and skills development Supportive team environment focused on quality and safety The chance to work on large-scale, technically advanced engineering projects Diversity & Inclusion We are committed to building an inclusive workplace where everyone feels valued and supported. A diverse range of perspectives and experiences strengthens our teams and contributes to better outcomes. Please get in contact for more details and an open chat!
Pipefitter Permanent Position Glasgow 40,016 Overview We are looking to for a Pipefitter to join the business and fabricate and install pipework systems and utilities, to deliver the best product to our customers. It is an exciting time for you to join us, as our shipbuilding business is growing and you will operate in a new, innovative, and competitive environment. Please ensure you have attached a copy of your qualifications when submitting your application. Day to day you will be - Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework Installing utilities aboard ship i.e. sinks, showers, and toilet Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Key Experience we are looking for - Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Current knowledge and experience of pipe manufacture and installation, and use of associated equipment Understanding of manufacturing processes Clear understanding of SHE, COSHH risks awareness Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc. Background in a major construction / manufacturing environment Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Jun 23, 2026
Full time
Pipefitter Permanent Position Glasgow 40,016 Overview We are looking to for a Pipefitter to join the business and fabricate and install pipework systems and utilities, to deliver the best product to our customers. It is an exciting time for you to join us, as our shipbuilding business is growing and you will operate in a new, innovative, and competitive environment. Please ensure you have attached a copy of your qualifications when submitting your application. Day to day you will be - Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework Installing utilities aboard ship i.e. sinks, showers, and toilet Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Key Experience we are looking for - Modern Apprenticeship certificate also known as Trade Papers (you will be required to provide papers) Current knowledge and experience of pipe manufacture and installation, and use of associated equipment Understanding of manufacturing processes Clear understanding of SHE, COSHH risks awareness Comfortable working in confined spaces and/or at height Safety certification i.e. SHE Induction, COSHH awareness, working at height etc. Background in a major construction / manufacturing environment Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Role: Electro-Mechanical Fitter Type: Permanent, Full Time Hours: Day shifts Salary: £40,000 - £45,000 per annum + Benefits + Overtime Location: Aberdeen Owen Daniels are supporting a leading engineering company and we are looking for a n experienced Electro-Mechanical Fitter to join on a permanent basis, due to growth in the business. Electro-Mechanical Fitter - Key responsibilities: Assembling and taking apart low and high voltage rotating equipment Experienced in inspecting, servicing, and repairing motors used in hazardous environments Identify damage and wear on AC/DC motors and similar machinery Ensure work meets quality and technical standards required for each job Complete paperwork daily and weekly correctly Electro-Mechanical Fitter - Essential Skills & Experience: Qualified in Electrical/Mechanical Engineering, with City & Guilds, NVQ, Apprenticeship or similar Background in electro-mechanical work and with rotating equipment Skilled in fault finding and strong attention to detail Flexible to travel for site-based and offshore work when required If you feel you're a good fit for this position, then please apply with your latest CV.
Jun 23, 2026
Full time
Role: Electro-Mechanical Fitter Type: Permanent, Full Time Hours: Day shifts Salary: £40,000 - £45,000 per annum + Benefits + Overtime Location: Aberdeen Owen Daniels are supporting a leading engineering company and we are looking for a n experienced Electro-Mechanical Fitter to join on a permanent basis, due to growth in the business. Electro-Mechanical Fitter - Key responsibilities: Assembling and taking apart low and high voltage rotating equipment Experienced in inspecting, servicing, and repairing motors used in hazardous environments Identify damage and wear on AC/DC motors and similar machinery Ensure work meets quality and technical standards required for each job Complete paperwork daily and weekly correctly Electro-Mechanical Fitter - Essential Skills & Experience: Qualified in Electrical/Mechanical Engineering, with City & Guilds, NVQ, Apprenticeship or similar Background in electro-mechanical work and with rotating equipment Skilled in fault finding and strong attention to detail Flexible to travel for site-based and offshore work when required If you feel you're a good fit for this position, then please apply with your latest CV.
Ford & Stanley Talentwise
Bristol, Gloucestershire
Mechanical Fitter Location: Bristol Contract Type: 18 months Hours: 40 hours per week Working Pattern: Monday to Friday, 07:00am 15:30pm Salary: £27.34 Umbrella per hour (Inside IR35) About the Role We are currently recruiting for a Mechanical Fitters to join a busy Heavy Maintenance team in Bristol. This role is responsible for carrying out the stripping down and rebuilding rail vehicles, as well as carry out overhaul, and repairs in line with company procedures, engineering standards, and safety requirements. The successful candidate will play a key role in ensuring rolling stock reliability and availability targets are achieved, while supporting continuous improvements in safety, quality, and operational efficiency. Key Responsibilities As a Mechanical Fitter you will carry out maintenance and overhaul activities on rail vehicles Complete work as allocated by the Team Leader or Heavy Maintenance Manager Operate and move rail vehicles within depot operating limits where authorized Adhere to all safety procedures, VMIs, local instructions, and relevant operational documentation Ensure worksheets and maintenance documentation are completed accurately and signed off promptly Follow all quality, environmental, and engineering procedures at all times Maintain high housekeeping and cleanliness standards across the depot Use PPE in accordance with company standards and local instructions Assist in achieving rolling stock availability and reliability targets Qualifications NVQ Level 3 in Engineering (Rail Traction & Rolling Stock preferred) Essential Previous experience within rail vehicle heavy maintenance environments or coach building environment carrying out strip downs and rebuilds of vehicles Ability to interpret engineering drawings and technical information Good understanding of mechanical and electrical engineering principles Must be able to start on the 23rd July 2026 What s on Offer Monday to Friday working pattern Competitive salary £27.34 Per hour Umbrella (inside IR35) Opportunity to work within a major rail engineering environment Long-term fixed-term contract with a well-established maintenance operation Ignite your engineering career apply today and accelerate your future in the rail industry. Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom. 1. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. 2. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. 3. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. 4. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
Jun 23, 2026
Contractor
Mechanical Fitter Location: Bristol Contract Type: 18 months Hours: 40 hours per week Working Pattern: Monday to Friday, 07:00am 15:30pm Salary: £27.34 Umbrella per hour (Inside IR35) About the Role We are currently recruiting for a Mechanical Fitters to join a busy Heavy Maintenance team in Bristol. This role is responsible for carrying out the stripping down and rebuilding rail vehicles, as well as carry out overhaul, and repairs in line with company procedures, engineering standards, and safety requirements. The successful candidate will play a key role in ensuring rolling stock reliability and availability targets are achieved, while supporting continuous improvements in safety, quality, and operational efficiency. Key Responsibilities As a Mechanical Fitter you will carry out maintenance and overhaul activities on rail vehicles Complete work as allocated by the Team Leader or Heavy Maintenance Manager Operate and move rail vehicles within depot operating limits where authorized Adhere to all safety procedures, VMIs, local instructions, and relevant operational documentation Ensure worksheets and maintenance documentation are completed accurately and signed off promptly Follow all quality, environmental, and engineering procedures at all times Maintain high housekeeping and cleanliness standards across the depot Use PPE in accordance with company standards and local instructions Assist in achieving rolling stock availability and reliability targets Qualifications NVQ Level 3 in Engineering (Rail Traction & Rolling Stock preferred) Essential Previous experience within rail vehicle heavy maintenance environments or coach building environment carrying out strip downs and rebuilds of vehicles Ability to interpret engineering drawings and technical information Good understanding of mechanical and electrical engineering principles Must be able to start on the 23rd July 2026 What s on Offer Monday to Friday working pattern Competitive salary £27.34 Per hour Umbrella (inside IR35) Opportunity to work within a major rail engineering environment Long-term fixed-term contract with a well-established maintenance operation Ignite your engineering career apply today and accelerate your future in the rail industry. Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom. 1. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. 2. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. 3. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. 4. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
About the Role: We are seeking an experienced and highly skilled Heavy Plant Fitter to join our team in South Wales. This is an excellent opportunity for a dedicated professional with a strong background in maintaining and repairing heavy plant machinery to work within a well-established and growing operation. Key Responsibilities: Carry out maintenance, servicing, and repairs on a wide range of heavy plant equipment (e.g., excavators, dumpers, loaders). Diagnose faults efficiently using both manual and diagnostic tools. Perform inspections and ensure all machinery meets safety and operational standards. Complete job reports and maintain accurate service records. Respond to breakdowns both in the workshop and on-site when required. Ensure compliance with health and safety regulations at all times. Requirements: Minimum of 10 years' proven experience as a Heavy Plant Fitter or similar role. Strong knowledge of hydraulic, mechanical, and electrical systems. Ability to work independently and as part of a team. Full UK driving licence (essential). Relevant qualifications in plant maintenance, engineering, or similar (preferred). Excellent problem-solving skills and attention to detail. What We Offer: Competitive salary based on experience. Overtime opportunities. Company vehicle (if applicable). Pension scheme. Ongoing training and development. Job Types: Full-time, Permanent Benefits: On-site parking Work Location: In person
Jun 23, 2026
Full time
About the Role: We are seeking an experienced and highly skilled Heavy Plant Fitter to join our team in South Wales. This is an excellent opportunity for a dedicated professional with a strong background in maintaining and repairing heavy plant machinery to work within a well-established and growing operation. Key Responsibilities: Carry out maintenance, servicing, and repairs on a wide range of heavy plant equipment (e.g., excavators, dumpers, loaders). Diagnose faults efficiently using both manual and diagnostic tools. Perform inspections and ensure all machinery meets safety and operational standards. Complete job reports and maintain accurate service records. Respond to breakdowns both in the workshop and on-site when required. Ensure compliance with health and safety regulations at all times. Requirements: Minimum of 10 years' proven experience as a Heavy Plant Fitter or similar role. Strong knowledge of hydraulic, mechanical, and electrical systems. Ability to work independently and as part of a team. Full UK driving licence (essential). Relevant qualifications in plant maintenance, engineering, or similar (preferred). Excellent problem-solving skills and attention to detail. What We Offer: Competitive salary based on experience. Overtime opportunities. Company vehicle (if applicable). Pension scheme. Ongoing training and development. Job Types: Full-time, Permanent Benefits: On-site parking Work Location: In person
Tech Connect Group
Bishops Tachbrook, Warwickshire
Role: Mechanical Fitter (4 day week)- Automotive / heavy vehicle fitting and assembly background Location: Warwick, CV34 6TE Hours: 37 hours per week between 06:30 and 16:00 Monday to Thursday Rates: £17.61/hour basic £23.48/hour for OT Mon-Thu £26.42/hour for OT on Friday & Saturday (all hours) £35.22/hour for OT on Sundays (all hours) We are seeking a skilled Fitter to ensure high-quality output that meets build times and processes, in line with BS EN ISO 9001 standards. You'll be responsible for your own quality, work closely with your team, and uphold health and safety standards. Flexibility and a proactive approach are essential as you may be required to work across different departments. Qualifications that set you apart include: Knowledge and experience of production processes and working to a takt time (automotive). Previous experience in a similar role. Ability to work in awkward, confined positions, climbing over vehicle, ability to enter/exit bodies and hoppers. Occasional heavy lifting required. Ability to move between the 3 Units at Warwick
Jun 23, 2026
Full time
Role: Mechanical Fitter (4 day week)- Automotive / heavy vehicle fitting and assembly background Location: Warwick, CV34 6TE Hours: 37 hours per week between 06:30 and 16:00 Monday to Thursday Rates: £17.61/hour basic £23.48/hour for OT Mon-Thu £26.42/hour for OT on Friday & Saturday (all hours) £35.22/hour for OT on Sundays (all hours) We are seeking a skilled Fitter to ensure high-quality output that meets build times and processes, in line with BS EN ISO 9001 standards. You'll be responsible for your own quality, work closely with your team, and uphold health and safety standards. Flexibility and a proactive approach are essential as you may be required to work across different departments. Qualifications that set you apart include: Knowledge and experience of production processes and working to a takt time (automotive). Previous experience in a similar role. Ability to work in awkward, confined positions, climbing over vehicle, ability to enter/exit bodies and hoppers. Occasional heavy lifting required. Ability to move between the 3 Units at Warwick
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Lanarkshire / South Lanarkshire / Ayrshire / Banffshire / West Lothian / Fife / Stirlingshire (Scotland - Field Based) Salary - £47,000 Shift - Days (Monday to Friday) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a well-established and growing engineering business covering multiple sites across Central and North Scotland. This is a field-based, day-shift role offering excellent work-life balance and the opportunity to work independently across a varied and interesting workload. You will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment on customer sites. The role involves diagnosing faults, carrying out repairs, and ensuring all machinery is maintained to a safe and efficient standard. This is a great opportunity for a skilled Plant Fitter looking for a stable days-based role with autonomy and variety. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction, or industrial machinery. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Strong diagnostic and problem-solving skills. Ability to work independently across multiple sites. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Basic electrical fault-finding knowledge. Previous experience in a mobile/field-based engineering role. Relevant mechanical engineering qualification (NVQ or equivalent). The Mobile Plant Fitter will benefit from: £47,000 salary. Monday to Friday days-based role. Company vehicle and fuel card (if applicable). Overtime opportunities. Excellent job security within a stable industry. Training and development opportunities. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Jun 23, 2026
Full time
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Lanarkshire / South Lanarkshire / Ayrshire / Banffshire / West Lothian / Fife / Stirlingshire (Scotland - Field Based) Salary - £47,000 Shift - Days (Monday to Friday) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a well-established and growing engineering business covering multiple sites across Central and North Scotland. This is a field-based, day-shift role offering excellent work-life balance and the opportunity to work independently across a varied and interesting workload. You will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment on customer sites. The role involves diagnosing faults, carrying out repairs, and ensuring all machinery is maintained to a safe and efficient standard. This is a great opportunity for a skilled Plant Fitter looking for a stable days-based role with autonomy and variety. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction, or industrial machinery. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Strong diagnostic and problem-solving skills. Ability to work independently across multiple sites. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Basic electrical fault-finding knowledge. Previous experience in a mobile/field-based engineering role. Relevant mechanical engineering qualification (NVQ or equivalent). The Mobile Plant Fitter will benefit from: £47,000 salary. Monday to Friday days-based role. Company vehicle and fuel card (if applicable). Overtime opportunities. Excellent job security within a stable industry. Training and development opportunities. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Reed Engineering are currently working with a bespoke machinery manufacturer based in Chelmsford who are rapidly growing. Due to this growth, they are currently looking for Mechanical / Multi Skilled Assemblers to join their team on a permanent basis! This company offers a wealth of internal training and opportunities to develop your skills in a friendly and supportive team environment. Key Skills: Require competence in precision assembly work using Engineering drawings, process specifications, sketches and verbal instructions. The work involves the use of hand and power tools, setting and shimming, manual machining operations and the use of precision measuring instruments. Applicants should have previously worked in a similar environment, be able to operate as part of a team but be able to work with minimal supervision. Main Duties: Assembly of complex soldering machines involving electrically driven mechanical movements, pneumatic actuators and electronic control sub-systems. Essential Qualifications: Formal training in mechanical skills ideallywithin an apprenticeship coupled with a qualification to at least NVQ Level 2 or City & Guilds. Equipment familiarisation and process specific training will be given. Additional Information: Salary: £24,000 - £34,000 dependent on experience Working hours: Monday - Friday, 8.00am to 4.30pm, Monday to Friday Permanent position If you would be interested in opportunities within this growing organisation who develops their staff internally, please click to apply now!
Jun 23, 2026
Full time
Reed Engineering are currently working with a bespoke machinery manufacturer based in Chelmsford who are rapidly growing. Due to this growth, they are currently looking for Mechanical / Multi Skilled Assemblers to join their team on a permanent basis! This company offers a wealth of internal training and opportunities to develop your skills in a friendly and supportive team environment. Key Skills: Require competence in precision assembly work using Engineering drawings, process specifications, sketches and verbal instructions. The work involves the use of hand and power tools, setting and shimming, manual machining operations and the use of precision measuring instruments. Applicants should have previously worked in a similar environment, be able to operate as part of a team but be able to work with minimal supervision. Main Duties: Assembly of complex soldering machines involving electrically driven mechanical movements, pneumatic actuators and electronic control sub-systems. Essential Qualifications: Formal training in mechanical skills ideallywithin an apprenticeship coupled with a qualification to at least NVQ Level 2 or City & Guilds. Equipment familiarisation and process specific training will be given. Additional Information: Salary: £24,000 - £34,000 dependent on experience Working hours: Monday - Friday, 8.00am to 4.30pm, Monday to Friday Permanent position If you would be interested in opportunities within this growing organisation who develops their staff internally, please click to apply now!
Fitter/Assembler Required! Our client is a leading UK-based manufacturer of specialist sterilisation solutions, serving a variety of professional, research, and clinical sectors worldwide. On behalf of our client, we are looking to recruit an experienced Fitter/Assembler. The successful candidate will be responsible for building, repairing, refurbishing, and preparing equipment. Package: Salary £28,000 - £30,000 (DOE) 25 days holiday + bank holidays Company pension scheme Early finish Fridays Working hours Monday - Thursday 8am till 5pm and Fridays 8am till 1pm Fitter/Assembler - Responsibilities: Actively participate in workshop activities including assembly, rework and testing of equipment Ensure all work is completed to specification, on time, and to required quality standards Ensure compliance with company quality standards and requirements Maintain strict adherence to health & safety procedures across all workshop activities Carry out quality inspections and checks Coordinate effectively with engineering, service, and production teams to meet deadlines Fitter/Assembler - Requirements: Time-served engineer or qualified to HNC/HND Strong experience in mechanical and/or electromechanical assembly and build environments, including pipework assembly, brazing, and soldering The successful candidate will be required to supply their own standard hand tools for routine daily work. Specialist tools and equipment (e.g. grinders, pipe benders, etc.) will be supplied by the company for shared use. Strong organisational skills with the ability to meet deadlines Strong commitment to health & safety and safe working practice Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application
Jun 23, 2026
Full time
Fitter/Assembler Required! Our client is a leading UK-based manufacturer of specialist sterilisation solutions, serving a variety of professional, research, and clinical sectors worldwide. On behalf of our client, we are looking to recruit an experienced Fitter/Assembler. The successful candidate will be responsible for building, repairing, refurbishing, and preparing equipment. Package: Salary £28,000 - £30,000 (DOE) 25 days holiday + bank holidays Company pension scheme Early finish Fridays Working hours Monday - Thursday 8am till 5pm and Fridays 8am till 1pm Fitter/Assembler - Responsibilities: Actively participate in workshop activities including assembly, rework and testing of equipment Ensure all work is completed to specification, on time, and to required quality standards Ensure compliance with company quality standards and requirements Maintain strict adherence to health & safety procedures across all workshop activities Carry out quality inspections and checks Coordinate effectively with engineering, service, and production teams to meet deadlines Fitter/Assembler - Requirements: Time-served engineer or qualified to HNC/HND Strong experience in mechanical and/or electromechanical assembly and build environments, including pipework assembly, brazing, and soldering The successful candidate will be required to supply their own standard hand tools for routine daily work. Specialist tools and equipment (e.g. grinders, pipe benders, etc.) will be supplied by the company for shared use. Strong organisational skills with the ability to meet deadlines Strong commitment to health & safety and safe working practice Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application
Ernest Gordon Recruitment
Northampton, Northamptonshire
Plant Fitter/Deisel Mechanic/Agri Engineer (Hydraulics) Northampton (Local Patch) £30,000 - £35,000 (£50k+ OTE) + Training + Progression + Overtime + Commission + Vehicle + Tools + Fuel Card Are you a Plant Fitter/Deisel Mechanic/Agri Engineer or similar, coming from a background within the mechanical engineering/fitting industry or a related field, looking to take the next step in your career by ent click apply for full job details
Jun 23, 2026
Full time
Plant Fitter/Deisel Mechanic/Agri Engineer (Hydraulics) Northampton (Local Patch) £30,000 - £35,000 (£50k+ OTE) + Training + Progression + Overtime + Commission + Vehicle + Tools + Fuel Card Are you a Plant Fitter/Deisel Mechanic/Agri Engineer or similar, coming from a background within the mechanical engineering/fitting industry or a related field, looking to take the next step in your career by ent click apply for full job details
We are looking for somebody who wants to proceed with their career in the aerospace industry. Some of the responsibilities include: Assist in managing operations that involve hazardous materials Ensure that correct pressures are maintained in the feedlines during tests. Site preparation and maintenance, Conducting pressure and control system checks Instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills Hands on mechanical fitter or engineering skills, ideally gained within an engineering-focused organisation or aerospace company. A proactive attitude toward safety and operational support.
Jun 23, 2026
Full time
We are looking for somebody who wants to proceed with their career in the aerospace industry. Some of the responsibilities include: Assist in managing operations that involve hazardous materials Ensure that correct pressures are maintained in the feedlines during tests. Site preparation and maintenance, Conducting pressure and control system checks Instrument calibration and steam boiler operations. Assisting with instrumentation, installation, and removal of flight engines before and after hot fire tests. Required Skills Hands on mechanical fitter or engineering skills, ideally gained within an engineering-focused organisation or aerospace company. A proactive attitude toward safety and operational support.
Are you an experienced engineer with a passion for mechanical equipment? CNC Recruitment is seeking a skilled Pipe Fitter to join our client based in the Mid Devon district Location: Tiverton Role Type: Field-based Contract: Permanent, 40 hours per week Salary: £32,000£36,000 per annum (paid overtime available) Key Responsibilities Assist with and carry out commercial biomass boiler installations and pr click apply for full job details
Jun 23, 2026
Full time
Are you an experienced engineer with a passion for mechanical equipment? CNC Recruitment is seeking a skilled Pipe Fitter to join our client based in the Mid Devon district Location: Tiverton Role Type: Field-based Contract: Permanent, 40 hours per week Salary: £32,000£36,000 per annum (paid overtime available) Key Responsibilities Assist with and carry out commercial biomass boiler installations and pr click apply for full job details
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Yorkshire / County Durham / Tyne and Wear Salary - £47000 Basic = O/T Shift - Days (Field-Based Role) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a leading heavy industry and plant maintenance business covering North Yorkshire, County Durham, and Tyne and Wear. This is a field-based role where you will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment across multiple customer sites. You will work independently and as part of a wider engineering team, ensuring all plant machinery is maintained to a high standard, minimising downtime, and delivering a high level of service to clients. The role offers variety, autonomy, and the chance to work with a well-established and respected organisation. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction machinery, or industrial equipment. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Ability to work independently and manage workload across multiple sites. Strong diagnostic and problem-solving skills. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Electrical fault-finding knowledge (basic to intermediate). Experience working in a field-based or mobile engineering role. NVQ or equivalent qualification in Mechanical Engineering or Plant Maintenance. The Mobile Plant Fitter will benefit from: Competitive salary depending on experience. Company van and fuel card (if applicable). Overtime opportunities. Training and development within a growing business. Stable, long-term opportunity within the heavy plant sector. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Jun 23, 2026
Full time
MOBILE PLANT FITTER Job Title - Mobile Plant Fitter Location - North Yorkshire / County Durham / Tyne and Wear Salary - £47000 Basic = O/T Shift - Days (Field-Based Role) Job Role of the Mobile Plant Fitter An excellent opportunity has arisen for a Mobile Plant Fitter to join a leading heavy industry and plant maintenance business covering North Yorkshire, County Durham, and Tyne and Wear. This is a field-based role where you will be responsible for the service, maintenance, and repair of a wide range of mobile and heavy plant equipment across multiple customer sites. You will work independently and as part of a wider engineering team, ensuring all plant machinery is maintained to a high standard, minimising downtime, and delivering a high level of service to clients. The role offers variety, autonomy, and the chance to work with a well-established and respected organisation. Sector - Heavy Plant / Industrial Engineering Non-Negotiable Requirements of the Mobile Plant Fitter Proven experience as a Mobile Plant Fitter or Plant Engineer. Strong mechanical fault-finding and repair skills. Experience working on heavy plant, construction machinery, or industrial equipment. Full UK driving licence. Essential Requirements for the Mobile Plant Fitter Mechanical engineering background. Experience with servicing, maintenance, and breakdown repair of plant equipment. Ability to work independently and manage workload across multiple sites. Strong diagnostic and problem-solving skills. Desirable Requirements for the Mobile Plant Fitter Hydraulics and pneumatics experience. Electrical fault-finding knowledge (basic to intermediate). Experience working in a field-based or mobile engineering role. NVQ or equivalent qualification in Mechanical Engineering or Plant Maintenance. The Mobile Plant Fitter will benefit from: Competitive salary depending on experience. Company van and fuel card (if applicable). Overtime opportunities. Training and development within a growing business. Stable, long-term opportunity within the heavy plant sector. Varied field-based role with autonomy and responsibility. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Kieran Wall at Pioneer Selection. As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply; please see our website for further details.
Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Jun 23, 2026
Full time
Workshop Fleet Technician Vehicle Management Unit - Monday to Friday (days) Your career path will see you upskilled on new products and put through various courses that will make you miore effifcient in your role. We are looking for a qualified and time served HGV Technician who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC would be desirable, as would a HGV Class 1 or licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. VMU
Ernest Gordon Recruitment
Stoke-on-trent, Staffordshire
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Stoke Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you click apply for full job details
Jun 23, 2026
Full time
Field Service Engineer (Heavy Plant & Construction Equipment) £20.00 - £21.50 per hour + Door-to-Door Pay + Overtime + Company Vehicle + Training + Company Benefits Stoke Are you a Mobile Plant Fitter with mechanical and/or electrical experience seeking a field-based role that offers door-to-door pay, regular overtime, and excellent long-term career stability with a growing engineering company? Do you click apply for full job details
HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jun 23, 2026
Full time
HGV / Trailer Fitter We are seeking a skilled and motivated HGV / Trailer Fitter to join a growing engineering and transport support operation. This role offers the opportunity to work on a diverse fleet of HGVs, trailers, specialist transport equipment, and associated plant machinery, ensuring all vehicles and equipment are maintained to the highest standards of safety, reliability, and compliance. Based from a fully equipped workshop, you will be part of an experienced team responsible for servicing, repairing, inspecting, and fault-finding across a varied fleet that supports operations throughout the UK. This is a hands-on position suited to an experienced fitter who enjoys working on a range of mechanical, hydraulic, pneumatic, and electrical systems. Key Responsibilities Carry out routine servicing, maintenance, and repairs on HGVs, trailers, and specialist transport equipment. Diagnose and rectify mechanical, hydraulic, pneumatic, and electrical faults. Conduct trailer inspections, MOT preparations, and safety checks in line with DVSA requirements. Perform repairs on braking systems, suspension, axle assemblies, lighting systems, and running gear. Maintain and repair ancillary equipment including generators, lighting towers, and small plant machinery. Complete all maintenance records and inspection documentation accurately. Ensure all work is completed safely and in accordance with company procedures and industry regulations. Support breakdown response and emergency repairs when required. Assist with fleet compliance, vehicle inspections, and preventative maintenance schedules. About You Proven experience as an HGV Technician, HGV Fitter, Trailer Fitter, Fleet Engineer, or similar role. Relevant engineering qualification, apprenticeship, or time-served experience. Strong understanding of HGV and trailer maintenance practices. Experience working with braking systems, hydraulics, pneumatics, suspension systems, and vehicle electrics. Ability to diagnose faults and carry out repairs independently. Knowledge of DVSA inspection standards and vehicle compliance requirements. Welding and fabrication experience would be advantageous. Strong attention to detail and commitment to safe working practices. Full UK driving licence (HGV licence advantageous but not essential). Positive attitude with the ability to work both independently and as part of a team. What's on Offer Competitive salary and overtime opportunities - 7.5 hours overtime guaranteed per week Long-term career stability within a well-established engineering operation. Exposure to a varied fleet of HGVs, trailers, and specialist equipment. Ongoing training and development opportunities. Company pension scheme. Life assurance and additional employee benefits. Employee rewards and recognition programme. Annual bonus scheme Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
MET Technician Location: Bristol Annual Salary: Up to £50,000 Hours: Mon-Fri, 40h week Benefits: Flexibility and early starts and finishes available, 30 Days holiday Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDLP
Jun 23, 2026
Full time
MET Technician Location: Bristol Annual Salary: Up to £50,000 Hours: Mon-Fri, 40h week Benefits: Flexibility and early starts and finishes available, 30 Days holiday Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDLP
