5 jobs found

Currently seeking two experienced CMM Programmer / Quality Inspectors to support a temporary project on-site at a customer facility in Gloucestershire. The support will involve programming and operating Mitutoyo CMM machines using MCOSMOS software and/or Aberlink CMM machines. Where there are no no existing CMM programmes, candidates will use their experience and be competent in creating programmes click apply for full job details

Currently seeking two experienced CMM Programmer / Quality Inspectors to support a temporary project on-site at a customer facility in Gloucestershire. The support will involve programming and operating Mitutoyo CMM machines using MCOSMOS software and/or Aberlink CMM machines. Where there are no no existing CMM programmes, candidates will use their experience and be competent in creating programmes from engineering drawings, setting up components and completing dimensional inspection activities independently. The support will include: Interpret engineering drawings, tolerances and dimensional inspection requirements. Create, prove out and run CMM programmes using Mitutoyo MCOSMOS or Aberlink software. Set up and inspect components using CMM equipment, including completing manual measurements where required. Complete part and assembly measurement in support of First Article Inspection and production inspection requirements. Accurately record inspection measurements and produce clear inspection results and reports. Use MahrSurf, Contracer or similar profile and contour measurement equipment. Use non-contact measurement systems, shadowgraphs and a range of conventional handheld metrology equipment. Identify and record any non-conformances, detailing the drawing requirement, actual measurement and relevant supporting specifications. Ensure robust inspection practices and techniques are employed efficiently across all customer products. Experience requirements: Proven experience working as a CMM Programmer, CMM Inspector or Dimensional Inspector within an engineering or manufacturing environment. Competent in programming, setting and operating either Mitutoyo CMM equipment using MCOSMOS software or Aberlink CMM equipment. Able to create CMM programmes from scratch, as opposed to solely operating existing programmes. Demonstrate strong knowledge of interpreting engineering drawings, geometric dimensioning and tolerancing. Competent in using handheld inspection instruments and conventional metrology equipment. Experience using MahrSurf, Contracer or similar profile measurement equipment. Experience completing First Article Inspections and compiling FAIR documentation would be advantageous. Demonstrate excellent attention to detail. Customer and results focused. This role is inside IR35.

We are looking for two experienced Quality Inspectors (with CMM Programming experience) to support a customer's final inspection team in South Somerset. The role will involve visual, manual, Faro and CMM inspection of manufactured components and assemblies. You will need strong mechanical inspection skills, the ability to work from engineering drawings and the confidence to both program and operate CMM equipment. The customer uses Aberlink CMM systems, although candidates with strong programming experience on other platforms, such as PC-DMIS, may also be considered, with Aberlink orientation being available. Key Responsibilities Perform manual inspection using micrometers, verniers, height gauges, bore gauges and other conventional metrology equipment against drawing and specification requirements Interpret engineering drawings, tolerances, specifications and GD&T requirement and in turn perform inspection using appropriate inspection methods and establish measurements from first principles. Use Faro equipment and visual inspection techniques where required. Create, prove out, modify and run CMM programs. Carry out detailed part and assembly measurement using CMM equipment. Accurately record inspection results and clearly document any non-conformances. Gather relevant inspection results, certificates and supporting evidence for FAI and PPAP packs. Enter inspection information into documentation prepared by Quality Engineering and return it for validation. Experience Required A minimum of three years' experience within aerospace, defence or a closely related precision engineering industry, working in mechanical or dimensional inspection roles. Previous experience as a CMM Programmer, CMM Inspector or Mechanical Inspector. Strong first-principles mechanical and dimensional inspection skills. Able to program CMM equipment using Aberlink, or very strong experience programming using similar programs. Confident setting up and inspecting a range of manufactured components and assemblies. Strong engineering drawing interpretation and GD&T knowledge. Competent using handheld and conventional metrology equipment. Experience recording clear, accurate and traceable inspection results. An understanding of the inspection information required for FAI or PPAP documentation. Good IT literacy, being able to update excel files and use other Microsoft applications. This role is inside IR35.

CMM Programmer / Quality Inspector (PC-DMIS) 40,000 - 45,000 Per Annum Overtime and benefits Basildon The Company A well established manufacturer of high quality precision machined components are looking for an experienced Quality Inspector / CMM Programmer to join their team. The company provide precision parts to a wide range of industries including aerospace and automotive in their modern and fast paced machining facility. The role - Quality inspector / CMM Programmer As a successful quality inspector / CMM Programmer you will be required to inspect precision engineered components. Duties - Quality inspector / CMM Programmer First off inspection and final inspection in a subcontract machining environment Operating/ Programming CMM - PC-DMIS Using inspection measurement equipment such as Micrometres, Verniers, Gauges Producing FAIR's, SPC, 5ys, NCR and KPI etc. reporting Meeting AS9100 and ISO 9001 requirements Requirements - CMM programming experience - PC-DMIS Experience using inspection measurement equipment A knowledge of inspection measurement equipment including a CMM. Good understanding of AS9100 and ISO 9001 requirements Ability to produce FAIR's, SPC, 5ys, NCR and KPI etc. reporting Subcontract machining environment experience Hours of Work Monday - Thursday 8:00am - 4:30pm Friday 8:00am - 12:30pm Salary 40,000 - 45,000 Per Annum Lots of overtime available at time and half Overtime Benefits Ongoing Career Development Opportunities and training provided Bereavement leave Company pension Cycle to work scheme Free, On-site parking

Senior mechanical Inspector - Quality Control Inspector and CMM Programmer. Small established aerospace precision engineering company have a opportunity for a PC-Dmis trained CMM programmer to join the team. This is a varied and busy role and will involve completing FAIRs and other aspects of Mechanical Quality inspection for the company. Key Responsibilities: - Program and operate Coordinate Measuring Machines (CMM) to measure complex parts and assemblies utilising PC-DMIS software. - Conduct thorough inspections of parts, components, and assemblies to verify adherence to design specifications and quality standards. - Create, review, and interpret detailed inspection reports using High QA software for Fairs - Collaborate with cross-functional teams including engineering, production, and quality assurance to resolve quality issues and enhance process improvements. - Maintain accurate documentation of inspection processes, results, and corrective actions for audits and quality assurance programs. - Ensure all measuring equipment and tools are accurately calibrated and maintained. Key Qualifications: - Proven experience as a CMM Programmer with proficiency in PC-DMIS software. - Comprehensive understanding of GD&T (Geometric Dimensioning and Tolerancing) principles. - Demonstrated experience/understanding of completing FAI reports. - Strong attention to detail and ability to interpret complex engineering drawings and blueprints. - Excellent organisational and communication skills. - Ability to work independently as well as part of a team in a fast-paced environment. - Commitment to upholding the highest standards of quality and precision. Education and Experience: - A minimum of 3 years of experience in a quality control or inspection role within the manufacturing or aerospace industry is required. What's on Offer: - Competitive salary and benefits package. - Opportunities for professional development and career advancement. - A supportive friendly work environment. This is a permanent job with a starting salary dependant on experience. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.