38 jobs found

Are you an experienced Electrical Technician, an Electrical Engineer or an Electrician who now wants to work for a reputable and stable business with an excellent work-life balance? We offer an environment where experience and knowledge is valued. Based at our site in Watford, you will be a vital part of the service department providing calibration on electrical devices. BASIC SALARY: Up to £32,000 BENEFITS: Holidays rising to 30 days on service plus Bank Holidays Pension Flexitime LOCATION: Watford, Hertfordshire COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Harrow, Wembley, Hayes, High Wycombe, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? Friendly, close knit, experienced team of Electrical Engineers - with a great team spirit Work life balance is important! Come in, do your job, leave at a sensible hour With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Calibration Technician, Electrical Engineer, Testing Engineer - calibration, electrical devices Working in the service department (of 6) and reporting to the Service Supervisor, you will run testing and calibration on circa 15-20 jobs per day. Using specialist calibration software, you will check the accuracy of the equipment and calibrate. After carrying out visual and basic electrical safety checks you will label appropriately, change batteries and clean the equipment before processing certification. If a unit fails calibration, you will check and adjust the equipment as required. PERSON SPECIFICATION: Calibration Technician, Electrical Engineer, Testing Engineer, Electrical Technician - Calibration, electrical devices You will have an NVQ Level 3 Electrical Qualification, or equivalent, or above. Good organisation skills with high attention to detail and a systematic approach to work are vital. Some computer literacy and the capacity to learn how to properly use specialist calibration equipment will be required. You will also ideally have some exposure to mains / high voltage electrics. This role would suit an Electrical Fitter or Electrical Assembler, or anyone who can wire a plug and not electrocute themselves! THE COMPANY: We're approaching 100 years in business and we are a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Calibration Technician, Calibration Engineer, Test Engineer, Electronics Engineer, Electronics Technician - calibration software, testing, diagnosis, diagnose, fault-find, schematics, prototype, assembly, analogue, digital, circuit, PCB, printed circuit board. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18487, Wallace Hind Selection

Role: Mechanical Technician (District heating/Energy Centre) Location: East London Salary: Competitive Salary + Pension/Healthcare The Client: My client is a prominent and forward-thinking energy infrastructure provider in the United Kingdom, specializing in the design, delivery, and long-term operation of large-scale decentralized low-carbon utility networks. The company focuses heavily on urban district heating, cooling, and power solutions, managing critical assets that supply sustainable energy to thousands of residential and commercial properties. Renowned for its engineering excellence and commitment to the green transition, the business integrates cutting-edge technologies like industrial heat pumps and waste-heat recovery systems to drive urban centres toward a zero-carbon future. The Role: Due to continued growth, they now require an experienced Mechanical Technician, responsible for ensuring that industrial equipment, machinery and systems are functioning efficiently and safely. The role typically involves regular inspections, troubleshooting, repairs, and preventive maintenance to minimise downtime and avoid disruptions created by equipment failures. Key Responsibilities Maintenance & Repair: Perform routine maintenance on machinery, equipment and systems to ensure optimal performance. Troubleshoot faults, diagnose issues, and repair or replace defective parts. Oversee repairs and perform emergency breakdown maintenance to minimise production downtime. Preventive Maintenance: Implement and manage the preventive maintenance schedule to reduce unplanned breakdowns. Inspect machines, components, and systems regularly to identify potential issues before they occur. Maintain records of all maintenance activities, including inspections, testing repairs, and replacements. Safety & Compliance: Ensure all activities comply with health, safety, and environmental regulations and processes. Conduct risk assessments and compile safe operating procedures to ensure the safe operation of machinery and equipment. Implement, follow and enforce proper safety protocols while performing repairs or maintenance tasks. Oversee the work of specialist contractors. Upgrades & Improvements: Identify opportunities to improve equipment performance, reduce energy consumption, and enhance safety. Assist in the design and installation of new equipment or system upgrades. Recommend improvements to operational and maintenance processes for increased efficiency. Inventory Management: Monitor and maintain an inventory of spare parts and materials needed for repairs and maintenance. Ensure parts and tools are available when required and reorder stock to avoid shortages. Documentation & Reporting: Maintain accurate logs of maintenance work, including activities, materials used, and downtime. Generate maintenance reports for management, highlighting issues, performance trends, and suggestions for improvement. Review and analyse historical data to predict future maintenance needs. Collaboration & Training: Work closely with team members, and other departments (Asset Assurance Team) to ensure equipment uptime and address maintenance needs. Provide guidance and training to junior technicians and apprentices on proper equipment care and safety. Collaborate with external service providers when necessary for specialised repairs or maintenance. Work closely with the SHEQ and Compliance teams regarding technical appointments, and complete all relevant mandatory training Skills & Competencies Strong understanding of mechanical, electrical and electronic systems. Proficient in troubleshooting and diagnostic tools. Familiarity with Computerised Maintenance Management Systems (CMMS) Precision in monitoring and inspecting equipment to prevent potential issues. Soft Skills Required Analytical thinking to evaluate and improve processes. Effective communication skills for collaborating with team members, specialist contractors, and management. Ability to document technical issues and communicate solutions clearly.

High Skills Technician: Electrical/Electronic Engineering Uxbridge Full time / Permanent £31,632 - £33,621 MAIN SCOPE OF POST: To ensure general maintenance and undertake simple repairs for the equipment within the Electrical/Electronic Engineering area. To provide assistance to lecturers in preparing equipment and resources for teaching and learning, supervise students during practical lesson, be responsible for maintaining tools and equipment to an efficient level and carry out risk assessments and recommend improvements to ensure all aspects of health and safety are complied with. DUTIES: • To regularly service and maintain tools and equipment within the Electrical/ Electronic Engineering (Power and Robotics Lab, PLCs and Mechatronics Lab, Electronics Lab, LN Experiments Lab) area and keep an up-to-date maintenance record. • To carry out risk assessment in conjunction with the Course Team Leader, Section Manager and Head of School and recommend improvements. • To report any major maintenance tasks to the Section Manager/Head of School to ensure the least impact to teaching and learning. • To raise purchase order request forms in order to maintain stock levels of materials and tools at a level which enables effective teaching and learning. • To produce and update equipment, tools and consumable list in the section • To maintain cleanliness of teaching environments within the area of responsibility. • To liaise with Head of School to ensure that all areas comply with health and safety and environmental requirements. • To supervise, with / without the Lecturer, students working within the laboratories with respect to hardware, software, health and safety and good working practice issues. • To assist course teams in preparing materials and resources for teaching and learning. • To assist the lecturer in setting up equipment for teaching and learning within the post holder's area of responsibility. • To demonstrate equipment to students if requested by Lecturers • To supervise students during practical support/ project lessons / directed study including during evenings • To work with other technicians to ensure continuity of provision across the School of Engineering. Qualifications • Degree in Electrical/ Electronic Engineering Knowledge and Experience: • At least 2 years' experience with electrical equipment, PLCs, robotics and mechatronics • Up-to-date knowledge of Health and Safety requirements applied to workshop environment • Industrial experience in Electrical/ Electronic Engineering • Experience and ability to use various higher education software such as Multisim, Matlab,PLC, Verilog, Labview, C Programming • Good communication skills, written and verbal • Good interpersonal skills • Ability to work and communicate effectively with young people • IT skills or willingness to develop them • Ability to work effectively as part of a team • Continuing professional development We are dedicated to safeguarding and promoting the welfare of children and expect all staff to share this commitment. You will have a safeguarding responsibility if appointed. The successful candidate will be subject to enhanced clearance through the Disclosure and Barring Service and employment will be subject to references. This post is not exempt from the Rehabilitation of Offenders Act 1974. To apply for this opportunity your detailed CV to Clarus Education now to be considered. We will be contacting those shortlisted within 48 hours of an application. Please see our website page headed 'About' and scroll to the bottom to see our 'Privacy Notice' for an explanation about how we use information we collect about you.

Kinetic Industrial are looking for an experienced Electrical Repair Technician to work for a leading global supplier of safety components and solutions to the railway industry. This is a permanent position, where you will be required to work Monday to Thursday, 7:30am to 3:30pm, and Friday 7:30am to 1:30pm. Role: Setting up electronic systems and devices Troubleshooting, repairing, and refurbishing industrial electronic equipment Troubleshooting electronic circuits to component and board level and effectively identifying failures Familiar with and able to utilise different types of test equipment Repairing and/or replacing electronic components to board level, including but not limited to: diodes, resistors, capacitors, integrated circuits Isolating problems between the test environment, the units under test and resolving as necessary Ability to solder and desolder Recording and interpreting test data to determine condition and determine when further analysis is needed Ability to recognise various electronic components and their functions Reading and comprehending complex manuals and diagrams Maintaining inventory Attending regular training workshops Identifying potential areas for improvement of internal processes and procedures Ensuring that all tools are operated in accordance with health and safety regulations Requirements: Previous experience as an Electronic Technician or as an Electrical Repair Technician Completed exams in Electronics (NOT ESSENTIAL) Excellent English skills (speaking, reading and writing) are mandatory Ability to interpret electronic schematics and product drawings Excellent attention to detail Strong analytical and problem-solving skills. Knowledge of MS Office Details: Salary - 28,000 to 32,000 per annum DOE Hours - Mon to Thurs: 7:30am to 3:30pm, Fri: 7:30am to 1:30pm (with some flexibility) Permanent job with progression opportunities Opportunity to work for an global company If you're seeking a new opportunity where you can learn, grow, and advance your career, and you possess the relevant skills and experience, we'd love to hear from you. Please apply with your most up-to-date CV. Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities.

Electronics & Instrumentation Technician Peterborough, Cambridgeshire - Fully Onsite £25.00 - £25.65 per hour 12-Month Contract (Strong Extension Potential) Monday-Thursday: 8:00am-4:00pm | Friday: 8:00am-3:30pm An exciting opportunity has arisen for an Electronics & Instrumentation Technician to join a world-class engineering and research facility in Peterborough. This role offers the chance to work within a highly skilled technical team supporting advanced engine development, validation, and testing programmes. This is an excellent opportunity for a hands-on technician looking to develop their expertise across electronics, instrumentation, calibration, maintenance, and project support within a cutting-edge engineering environment. What You'll Be Doing Assembling and upgrading instrumentation panels to required standards. Calibrating, maintaining, and fault-finding precision instrumentation systems. Providing first-line breakdown support for test facilities and associated equipment. Performing preventative maintenance and calibration activities. Supporting upgrades, modifications, and commissioning of test equipment and facilities. Diagnosing electronic system faults using specialist test equipment. Reading and interpreting electrical, electronic, pneumatic, and hydraulic schematics. Maintaining accurate maintenance and calibration records. Working closely with engineers, technicians, and contractors on a variety of technical projects. What We're Looking For Essential Technical apprenticeship (electrical/electronic discipline) or equivalent industry experience. Experience building or wiring instrumentation panels. Calibration, fault-finding, and maintenance of precision instrumentation. Ability to read and interpret electrical and electronic schematics. Experience working to health and safety standards and procedures. Strong troubleshooting and problem-solving skills. Good documentation and reporting skills. Desirable HNC or equivalent engineering qualification. Multi-skilled across electrical and electronic disciplines. Experience within a test facility or test cell environment. Knowledge of Root Cause Analysis techniques. Understanding of wiring regulations and standards (18th Edition advantageous). Competent with Microsoft Office applications. Why Apply? Work within a state-of-the-art engineering and testing environment. Exposure to a wide variety of technical challenges and projects. Join a collaborative team of engineers, technicians, and specialists. Gain experience across electronics, instrumentation, calibration, maintenance, and facility upgrades. Long-term contract opportunity with strong potential for extension. Excellent opportunity for continuous learning and technical development. If you're a practical, hands-on technician with a passion for electronics, instrumentation, and solving technical challenges, we'd love to hear from you.

Job Title: Electronic Technician Location: Lancashire Salary: Up to £40k (DOE) We're seeking a skilled Electronics Technician to join a growing engineering team. This is an excellent opportunity for a hands-on individual with experience in electronic assembly, testing, fault finding, and repair to support the development and manufacture of innovative electronic products. The successful candidate will work closely with engineers and production teams to build, test, troubleshoot, and maintain electronic assemblies while ensuring high standards of quality and reliability. About the Role Assemble electronic products, PCB assemblies, and electromechanical systems. Carry out soldering and rework of through-hole (THT) and surface mount (SMT/SMD) components. Perform functional testing, inspection, calibration, and verification of electronic assemblies. Diagnose and repair faults at component and board level. Interpret engineering drawings, schematics, bills of materials (BOMs), and assembly instructions. Support prototype builds, product development activities, and new product introduction projects. Maintain accurate test records, repair reports, and production documentation. Use test equipment including oscilloscopes, multimeters, signal generators, logic analysers, and other diagnostic tools. Assist with continuous improvement initiatives to enhance product quality and manufacturing efficiency. Ensure compliance with company quality standards, procedures, and health and safety requirements. About You Previous experience in an Electronics Technician, Test Technician, Production Technician, or similar role. Strong soldering and PCB assembly skills. Experience with fault finding and repair of electronic assemblies. Ability to read and interpret electrical schematics and technical documentation. Experience using electronic test and measurement equipment. Familiarity with embedded systems, microcontrollers, or firmware testing. Good attention to detail and a methodical approach to problem solving. Strong communication and teamwork skills. Ability to work effectively in a fast-paced manufacturing or engineering environment. Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.

Are you an experienced technician or engineer looking for a new challenge? My client is a friendly and successful specialist engineering company who are looking to expand. Their innovative products are supplied to a wide range of sectors and your responsibilities will include the assembly of products, predominantly mechanical, eg fabrication, welding, fitting components but also some electrical/electronic work. You will be following processes and instructions to assemble these highly technical products then testing them to ensure product quality. You will be used to working with electro-mechanical products and have strong attention to detail together with good communication and interpersonal skills. Good problem solving skills and a strong team player, you will have a good broad understanding of different engineering and manufacturing processes. Working in a small and friendly team, this role may interest you if you have worked previously as a production technician, engineering technician, manufacturing technician, assembly operative, production operative, assembly technician, mechanical assembly technician, systems technician, production assembly operative, electro-mechanical technician or similar. This role is easily commutable from Cambridge, Newmarket, Huntingdon, Chatteris, March, Littleport, Huntingdon, St Ives, Mildenhall, Ely, Thetford, Brandon and many more places in Cambridgeshire, Norfolk and Suffolk.

We are working with a global Software, Systems & Engineering company in the Defence Sector, supporting them with appointing an Electronic Technician . You ll play a key role in helping us ensure customer systems meet Electromagnetic Compatibility (EMC) and TEMPEST requirements, supporting the safety, security and performance of critical defence and national security systems. In this hands-on role, you ll be involved in the planning, setup and execution of EMC/TEMPEST tests, working directly with customer equipment and contributing to high quality technical documentation under UKAS accreditation. Salary: £37-38k per annum + company benefits, including 25 days holiday plus a highly competitive pension scheme Location: Farnborough - 100% onsite Working hours : 37 per week Duration : perm, full time Requirements: sole Uk nationals living and working in the UK for the past 5 years What You ll Be Doing: Supporting the development of EMC test plans under guidance Setting up customer equipment for EMC and TEMPEST testing Conducting EMC/TEMPEST measurements using specialist RF equipment Analysing test data and contributing to detailed technical test reports Working closely with senior engineers and customers to ensure smooth test delivery We re Interested In People Who Have: A strong interest in RF engineering, EMC or electronics testing Any hands-on experience with electronics or RF measurements (including during an apprenticeship, college course or first role) The ability to write clear technical notes or documents Good communication skills and confidence working with customers Willingness to travel occasionally in the UK or overseas Basic ability to use equipment such as oscilloscopes, signal generators, spectrum analysers or antennas (training provided) Essential Qualifications You ll need one of the following: An electrical or electronics-based Apprenticeship (NVQ Level 3) HNC/HND in an electrical or electronics discipline

2 x Contract positions Outside IR35 On site We are seeking an experienced Test Technician to join their team on a contract basis. T Key Responsibilities: Product (software, hardware and mechanics) assembly, troubleshooting, and testing Executing tests and writing reports Designing, constructing, maintaining, and calibrating test equipment Maintaining a clean, tidy, and safe working environment Implementing continuous improvement practices for work processes and the working environment Identifying and managing continuous improvement of equipment and test methods Assisting development engineers with product analysis, including FMEAs and design reviews Ensuring work adheres to company quality standards and national/international standards Ensuring that all work is carried out safely Job Requirements: Understanding of electronic circuits, with experience in designing simple circuits Experience in assembling, troubleshooting, and testing electronic products Proficiency with electronic test equipment, including DVMs, oscilloscopes, and data loggers Ability to perform soldering and rework techniques for SMD components Computer literacy, including proficiency in Microsoft Excel and Word Preferred (but not essential) Skills: Experience in dyno preparation and maintenance Ability to use CAD design for general fixtures and fittings Experience with high voltage (> 60V) and/or high current (> 100A) products Experience with EMC testing and knowledge of relevant standards (e.g., REG10, ISO16750, CISPR 25) Experience in thermal and environmental testing Background in automotive product development and testing Mechanical skills, including assembly and creation of one-off parts, and use of machine shop tools Experience with high-volume products Experience in HALT/HAAS testing Qualifications: A HND or equivalent qualification in Electrical and Electronic Engineering is required. Relevant experience may also be considered. Attributes: Enthusiastic, flexible, and able to thrive during times of ambiguity and change Structured individual with the ability to interact and communicate at all levels of the organisation Strong interpersonal, verbal, and written communication skills, with the ability to build relationships with internal and external stakeholders Good commercial awareness and proactive problem-solving skills, to ensure business needs are understood and agreed solutions are delivered This is a very hands-on position - we expect a person with a 'roll up your sleeves' attitude

Join a workshop team where engineers stay for 20-30 years. We're recruiting for a Senior Workshop Service Technician to join Karcher's long-standing Banbury workshop team, supportive environment where people genuinely enjoy what they do, know their craft and get stuck in. This isn't a high-pressure, micromanaged environment. It's a professional, hands-on workshop where everyone pulls together, there's good banter, people support each other and experienced engineers take pride in doing a great job. You'll work on a varied range of industrial cleaning equipment - from commercial pressure washers and scrubber dryers through to larger specialist cleaning machinery - diagnosing faults, servicing, repairing and preparing equipment to a high standard. This role would suit someone from a mechanical, plant, vehicle, agricultural, FLT, powered access or general engineering background who enjoys fault finding, repairs and being part of a close-knit technical team. The Role of Senior Workshop Technician Diagnose, service, maintain and repair Karcher industrial cleaning equipment and specialist machinery Carry out fault finding across mechanical, electrical, hydraulic and pneumatic systems Conduct pre-delivery inspections (PDI's) and machine preparation Replace components, complete repairs and maintain high workshop standards Produce accurate repair documentation and cost estimates using service systems Support field engineers and fellow workshop technicians where required Ensure tools, equipment and working practices meet safety and quality standards Work methodically and follow service processes to deliver a high standard of workmanship What We're Looking For We're open to transferable backgrounds and would love to hear from people with experience such as: Workshop Mechanic Garage Mechanic / Vehicle Technician FLT Engineer / Forklift Technician Plant, Agricultural or Powered Access Engineer Diesel Technician Workshop Engineer Service Technician Maintenance Engineer You'll ideally bring: Strong mechanical fault-finding skills Workshop-based service, repair or maintenance experience Good understanding of engines, hydraulics, electrics/electronics, batteries and mechanical systems A practical, hands-on mindset and pride in quality workmanship A methodical approach and willingness to learn Good team fit - someone who enjoys being part of a supportive workshop environment What's in it for you? Up to 41,110 DOE plus an excellent benefits package, including: 25 days holiday + bank holidays + your birthday off Pension, health plan, sick pay and critical illness cover End of year discretionary bonus Staff discounts and social events Ongoing training and career development Stable Monday-Friday workshop role (8:30am-5:00pm) A genuinely supportive, long-standing team environment If you enjoy fault finding, like variety, take pride in quality workmanship and want to be part of a team where people genuinely stay - we'd love to hear from you.

Job Title: HGV Technician Location: Swindon Salary: 48,000 - 54,000 Overtime paid at 1.3x Various Shifts Available As HGV Technician you will responsible for maintaining, diagnosing, and repairing vehicles to ensure that vehicles are safe, reliable, and compliant with regulations. Technicians work on a range of tasks, from routine servicing to complex mechanical and electrical repairs, ensuring vehicles are fit for operation. What you'll do as the HGV Technician: Routine servicing, repair and maintenance of the PSV Fleet to highest DVSA standards Be first point of contact for in depth fault finding and repairs on various bus types. SME (Subject Matter Expert) in Mechanical and Electrical fault finding. Be fully conversant with the overhaul and repair of vehicle electrical systems including engine management, automatic/semi-automatic gearboxes, electronic braking, suspension, electronic destinations, multiplex wiring systems and E.C.U. Carry out projects/trials on behalf of the Engineering Director and/or Technical Manager Maintain detailed records of all work carried out, including parts used and time taken. Fully comply with all HS&E legislation and group policies. What you'll need to be an HGV Technician: NVQ level 3, City & Guilds, Time Served or equivalent qualifications in HGV / PSV Maintenance Full UK Driving licence Previous LCV Technician experience Previous HGV Technician experience Strong diagnostic and problem-solving skills Fully conversant with the safe operation of workshop equipment and the overhaul and repair of vehicle electrical systems. If you are interested in this HGV Technician role, please apply to Dudley today!

Commercial Gas Engineer - Job Summary. We are looking to recruit an enthusiastic and dedicated commercial gas engineer to carry out a broad range of planned and reactive gas tasks in Worcester/Gloucester and surrounding areas. Salary: 46,000 to 50,000 (subject to knowledge and experience) Benefits: Company van, fuel card, Employee Assistance Programme, company performance bonus and pension Key Responsibilities include (but not limited to) Carry out planned and reactive maintenance across the estate as directed by Contract Manager (within capabilities and training) Work on own or as part of team to meet required deadlines and contract performance standards Work flexible working hours to suit business requirements Be on out of hours call out rota, attend emergency mechanical repair works as required Maintain a safe working environment for yourself, end users on site and general public at all Escalate issues to Supervisor/Contract Manager immediately. Work on own or as part of team to meet required deadlines and contract performance standards Liaise with site staff to gain access to sites and rooms to carry out maintenance tasks Assist contract supervisor to produce repair quotations Any other tasks required by company within skill set / experience Minimum Requirements / Qualifications Essential Domestic / Commercial gas certification CCN1, CENWAT, CODNCCO1, CDGA1 and CIGA1. Recognised Health & Safety training Good written and verbal communication skills Ability to achieve high levels of customer satisfaction Be able to operate SMART devices and complete electronic documentation Full driving licence Pass DBS / Police background checks for working in schools / Police stations Desirable NVQ 2/3 in relevant Mechanical discipline (or equivalent experience) OFTEC registered technician or knowledge / experience working on oil fired appliances / systems Unvented water systems WRAS Qualification Electrical safety training IPAF / PASMA qualification Benefits Up to 50,000 per annum Overtime 33 Days Holiday Ipad Iphone Vehicle Private Healthcare Contributory Pension

Battery Field Engineer Manchester £30,000 to £35,000 + Overtime + Van + Matched Pension + Benefits Package Battery Field Engineer required by a rapidly expanding battery recycling company. As a Battery Field Engineer, you will play a critical role in supporting the technical operations of the recycling processes. You will work both on-site at their Manchester facility and off-site at customer locations. Your responsibilities will span equipment maintenance, troubleshooting, and optimisation, as well as providing technical solutions to ensure the highest level of service and professionalism in all operations. This is a unique opportunity to be at the forefront of energy technology, helping to drive the future of sustainable energy storage. The Battery Field Engineer Role: Conduct on-site planned and reactive maintenance, repairs, and troubleshooting of battery related equipment to minimize downtime and maximize operational efficiency. Perform battery disassembly, sorting, and processing, ensuring adherence to safety and quality standards. Provide technical support during off-site operations, representing the company professionally while ensuring customer satisfaction. Implement and manage proactive and reactive maintenance schedules for equipment, identifying opportunities for system upgrades or process improvements. Collaborate with cross-functional teams to address technical issues, improve workflows, and contribute to continuous improvement initiatives. Train and mentor technicians and operators in equipment use, safety protocols, and process optimization. Maintain accurate records of work performed, including equipment logs, maintenance schedules, and inventory management. Participate in project-based work, offering problem-solving skills to enhance or develop equipment and processes. The Battery Field Engineer: Understanding of mechanical, electrical, or electronic systems used in battery-based vehicles and equipment. Proven ability to diagnose and resolve technical issues efficiently. Knowledge of health and safety regulations and environmental compliance. Engineering qualifications at a Level 3 or equivalent

Remanufacturing Electrical Technician Location - Coventry Salary - Competitive Hours - Full time Are you an experienced Electronics Technician with strong PCB rework and component-level fault-finding skills? Hawk 3 Talent Solutions is proud to be recruiting on behalf of a leading name in automotive and defence engineering for a highly skilled, hands-on Remanufacturing Electrical Technician . This role is perfect for someone with a keen eye for detail, precision in their work, and a passion for electronics and engineering problem-solving. The Role: You'll be responsible for the assessment, repair, and testing of a wide range of automotive electrical and electronic components , working to both OEM and MoD standards . Key Responsibilities: Assess and evaluate returned electrical/electronic components Perform PCB rework , component-level fault-finding , and repairs Dismantle, repair, and rebuild units to high standards Ensure accurate documentation (job cards, BOMs) Test components to original equipment specifications Report faults and non-conformances to the Workshop Supervisor Follow H&S and QHSE procedures at all times Support other workshop activities as needed What We're Looking For: Technical Skills: Strong experience in electronic fault-finding at component level Proficient in PCB rework (soldering, reflow, repair techniques) Ability to read schematics and circuit diagrams Logical and methodical approach to problem-solving Familiarity with QHSE standards and workshop best practice Comfortable using MS Office (especially Excel, or willing to learn) Personal Attributes: Excellent attention to detail Strong communication and teamwork skills Organised, proactive, and eager to learn Preferred Qualifications: HNC/HND, NVQ, or equivalent in Electronics or Electrical Engineering Previous experience in automotive , defence , or related sectors What's in It for You: Competitive salary 25 days holiday + bank holidays Life cover at 3x base salary 5% employer pension contribution (after 12 months) On-the-job training and long-term career development Access to wellbeing support resources If you would like to apply for the role of Remanufacturing Electrical Technician then please email your CV to (url removed) or call Donna on (phone number removed). Closing date is 08.10.25. Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you wanting to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £35,000 - £45,000 BENEFITS: Overnight payment for any nights away Company Car or Van 25 Days Annual Leave (plus Statutory Days) Pension - matched to 5% of salary Private Healthcare Life Assurance Income Protection cover LOCATION: Midlands-based, in and around the M6 or M1, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Birmingham, Rugby, Leicester, Wolverhampton, Solihull, Worcester, Royal Leamington Spa, Coventry, Warwick. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery You will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18247, Wallace Hind Selection

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection

Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection