You will take a leading role in the design and development of RF/mmWave circuits, modules and subsystems, ensuring products meet performance, quality, cost and manufacturability targets. The successful candidate will provide technical leadership across multiple projects, support junior engineers and contribute towards continuous improvement of engineering processes and best practice. Key Responsibilities Lead the design and development of RF/mmWave circuits, assemblies and systems. Own RF specifications, simulation activities, design implementation and verification. Carry out system analysis including gain line-up, tolerance and yield analysis. Support component selection including active devices, MMICs and RF technologies. Work closely with PCB, mechanical, manufacturing and test teams to ensure robust product delivery. Produce and review technical documentation including design packs, peer reviews and release data. Lead technical reviews and identify potential design or project risks. Support validation, environmental testing and product introduction activities. Investigate and resolve technical issues during development and production phases. Ensure projects are delivered in line with technical, programme and commercial requirements. Mentor and support less experienced engineers within the team. Experience Required Degree qualified in Electronics, RF/Microwave Engineering, Communications Engineering or similar. Strong background in RF or microwave circuit/system design. Experience using RF simulation and design tools such as ADS, CST, Microwave Office or similar. Good understanding of RF system analysis, design for manufacture and tolerance analysis. Experience with RF modules, amplifiers, transceivers, filters or subsystems would be advantageous. Ability to provide technical leadership within a multidisciplinary engineering environment. Strong analytical and problem-solving skills with a hands-on engineering mindset. Confident communicator, comfortable working across engineering, manufacturing and project teams.
Jun 16, 2026
Full time
You will take a leading role in the design and development of RF/mmWave circuits, modules and subsystems, ensuring products meet performance, quality, cost and manufacturability targets. The successful candidate will provide technical leadership across multiple projects, support junior engineers and contribute towards continuous improvement of engineering processes and best practice. Key Responsibilities Lead the design and development of RF/mmWave circuits, assemblies and systems. Own RF specifications, simulation activities, design implementation and verification. Carry out system analysis including gain line-up, tolerance and yield analysis. Support component selection including active devices, MMICs and RF technologies. Work closely with PCB, mechanical, manufacturing and test teams to ensure robust product delivery. Produce and review technical documentation including design packs, peer reviews and release data. Lead technical reviews and identify potential design or project risks. Support validation, environmental testing and product introduction activities. Investigate and resolve technical issues during development and production phases. Ensure projects are delivered in line with technical, programme and commercial requirements. Mentor and support less experienced engineers within the team. Experience Required Degree qualified in Electronics, RF/Microwave Engineering, Communications Engineering or similar. Strong background in RF or microwave circuit/system design. Experience using RF simulation and design tools such as ADS, CST, Microwave Office or similar. Good understanding of RF system analysis, design for manufacture and tolerance analysis. Experience with RF modules, amplifiers, transceivers, filters or subsystems would be advantageous. Ability to provide technical leadership within a multidisciplinary engineering environment. Strong analytical and problem-solving skills with a hands-on engineering mindset. Confident communicator, comfortable working across engineering, manufacturing and project teams.
Maintenance Manager Location: Dudley Competitive Salary Hours: Mornings 06 00 Sector: Manufacturing / Heavy Industry Overview: We are seeking a hands-on Maintenance Manager to take ownership of engineering and maintenance operations at a busy manufacturing site in Dudley. This opportunity would suit either an experienced Maintenance Manager or a Maintenance Supervisor ready to step into a broader leadership role. The position offers a balance of team leadership and practical, on-the-ground engineering involvement. You will lead a small team of multi-skilled engineers while driving reliability, improving maintenance systems, and ensuring efficient production operations. Key Responsibilities Lead and support a team of 3 multi-skilled maintenance engineers Take ownership of all planned and reactive maintenance activities Develop and enhance preventative maintenance (PPM) systems Improve equipment reliability and minimise downtime Manage contractors, suppliers, and maintenance budgets Drive continuous improvement and TPM initiatives Ensure compliance with all health, safety, and statutory requirements Support site projects including installation, upgrades, and equipment changes Candidate Profile Experience as a Maintenance Manager, Supervisor, or Lead Engineer within manufacturing Strong hands-on engineering background (electrical or mechanical) Good working knowledge of hydraulics, pneumatics, and electrical systems Experience managing preventative maintenance systems and breakdown response Ability to lead a team while remaining operationally involved Strong organisational and communication skills Desirable: HNC or equivalent in Engineering 18th Edition and/or IOSH certification Experience within heavy industry, foundry, or similar environments Why Apply: Opportunity to take ownership of maintenance strategy and systems Small team environment with real autonomy and influence Balanced role combining leadership and hands-on engineering Established and stable manufacturing business Scope to drive continuous improvement and operational efficiency Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jun 16, 2026
Full time
Maintenance Manager Location: Dudley Competitive Salary Hours: Mornings 06 00 Sector: Manufacturing / Heavy Industry Overview: We are seeking a hands-on Maintenance Manager to take ownership of engineering and maintenance operations at a busy manufacturing site in Dudley. This opportunity would suit either an experienced Maintenance Manager or a Maintenance Supervisor ready to step into a broader leadership role. The position offers a balance of team leadership and practical, on-the-ground engineering involvement. You will lead a small team of multi-skilled engineers while driving reliability, improving maintenance systems, and ensuring efficient production operations. Key Responsibilities Lead and support a team of 3 multi-skilled maintenance engineers Take ownership of all planned and reactive maintenance activities Develop and enhance preventative maintenance (PPM) systems Improve equipment reliability and minimise downtime Manage contractors, suppliers, and maintenance budgets Drive continuous improvement and TPM initiatives Ensure compliance with all health, safety, and statutory requirements Support site projects including installation, upgrades, and equipment changes Candidate Profile Experience as a Maintenance Manager, Supervisor, or Lead Engineer within manufacturing Strong hands-on engineering background (electrical or mechanical) Good working knowledge of hydraulics, pneumatics, and electrical systems Experience managing preventative maintenance systems and breakdown response Ability to lead a team while remaining operationally involved Strong organisational and communication skills Desirable: HNC or equivalent in Engineering 18th Edition and/or IOSH certification Experience within heavy industry, foundry, or similar environments Why Apply: Opportunity to take ownership of maintenance strategy and systems Small team environment with real autonomy and influence Balanced role combining leadership and hands-on engineering Established and stable manufacturing business Scope to drive continuous improvement and operational efficiency Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jonathan Lee Recruitment Ltd
Hindlip, Worcestershire
Sales Coordinator Worcester £26,681 to £33,903 plus excellent benefits (8% pension, Private Healthcare) The Company Our client, Yamazaki Mazak is a leading global manufacturing company based in Worcester. This is an excellent opportunity to work for a market leading Machine Tool manufacturer who have been at the forefront of the industry for many years. Overview We are seeking an organised and professional Intercompany Sales Coordinator to support the coordination of machine orders, production schedules, and export delivery activities between Mazak branches and internal manufacturing teams. This role plays a key part in ensuring customer requirements are communicated clearly, delivery deadlines are achieved, and orders progress smoothly from enquiry through to shipment. You will work closely with EDM, Assistant Buyers, Production, Shipping, and Engineering teams to support on-time delivery, resolve issues, and maintain a consistently high standard of customer service throughout the order management process. Job Description Act as the primary point of contact between YMX branches and internal production departments Coordinate intercompany sales orders from enquiry through to delivery Liaise closely with EDM and Assistant Buyers to ensure material availability and production planning accuracy Monitor machine order progress and proactively manage delivery schedules Identify and resolve potential delivery risks, escalating issues where necessary Create and maintain MOS s Maintain accurate order and shipment records using internal systems Create and organise export documentation, including export invoices, to facilitate machine shipments to customer destinations Communicate professionally with internal stakeholders and customers at all times Support continuous improvement within intercompany order management processes Person Specification Essential Criteria Experience managing customer or internal stakeholder relationships Familiarity with production planning or order coordination processes Excellent written and verbal communication skills Professional and customer-focused approach Computer literate with strong administrative skills High attention to detail and organisational ability Ability to manage multiple priorities and deadlines Demonstrates high levels of ownership and accountability Desirable Criteria Familiar with AS400, AX, and Workflow systems Proficient in Microsoft Excel Familiar with internal departments such as Shipping and Engineering Experience within manufacturing, engineering, export, or supply chain environments Benefits Competitive salary and benefits package including 8% pension contribution, private healthcare, life assurance, subsidised restaurant, free parking, employee wellbeing support, and ongoing training and development opportunities. If this Sales Coordinator role sounds like the right opportunity for you then please call to discuss further or email me at the address supplied. Band 5-7 Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jun 16, 2026
Full time
Sales Coordinator Worcester £26,681 to £33,903 plus excellent benefits (8% pension, Private Healthcare) The Company Our client, Yamazaki Mazak is a leading global manufacturing company based in Worcester. This is an excellent opportunity to work for a market leading Machine Tool manufacturer who have been at the forefront of the industry for many years. Overview We are seeking an organised and professional Intercompany Sales Coordinator to support the coordination of machine orders, production schedules, and export delivery activities between Mazak branches and internal manufacturing teams. This role plays a key part in ensuring customer requirements are communicated clearly, delivery deadlines are achieved, and orders progress smoothly from enquiry through to shipment. You will work closely with EDM, Assistant Buyers, Production, Shipping, and Engineering teams to support on-time delivery, resolve issues, and maintain a consistently high standard of customer service throughout the order management process. Job Description Act as the primary point of contact between YMX branches and internal production departments Coordinate intercompany sales orders from enquiry through to delivery Liaise closely with EDM and Assistant Buyers to ensure material availability and production planning accuracy Monitor machine order progress and proactively manage delivery schedules Identify and resolve potential delivery risks, escalating issues where necessary Create and maintain MOS s Maintain accurate order and shipment records using internal systems Create and organise export documentation, including export invoices, to facilitate machine shipments to customer destinations Communicate professionally with internal stakeholders and customers at all times Support continuous improvement within intercompany order management processes Person Specification Essential Criteria Experience managing customer or internal stakeholder relationships Familiarity with production planning or order coordination processes Excellent written and verbal communication skills Professional and customer-focused approach Computer literate with strong administrative skills High attention to detail and organisational ability Ability to manage multiple priorities and deadlines Demonstrates high levels of ownership and accountability Desirable Criteria Familiar with AS400, AX, and Workflow systems Proficient in Microsoft Excel Familiar with internal departments such as Shipping and Engineering Experience within manufacturing, engineering, export, or supply chain environments Benefits Competitive salary and benefits package including 8% pension contribution, private healthcare, life assurance, subsidised restaurant, free parking, employee wellbeing support, and ongoing training and development opportunities. If this Sales Coordinator role sounds like the right opportunity for you then please call to discuss further or email me at the address supplied. Band 5-7 Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Description Careys Civil Engineering is recruiting experienced Shuttering Joiners to support the delivery of one of Edinburgh's major city centre regeneration and infrastructure developments. This is long-term work on reinforced concrete and heavy civils schemes, including retaining walls, slabs, pile caps, cores, ground beams and associated RC structures across a large phased programme. Applications from established shuttering gangs are welcome. What you will be doing Carrying out shuttering formwork activities safety and to specification Installing and striking formwork systems Working from drawings and programme requirements Supporting reinforced concrete pours and associated civils activities Maintaining high standards of workmanship, safety and housekeeping Requirements Essential Valid Blue CSCS Skilled Worker card (Min) Proven experience as a Shuttering Joiner on civils, infrastructure, or RC Projects Experience with PERI, Doka or timber formwork systems Ability to read and work from technical drawings Reliable work history, within shuttering/formwork or heavy civils environments Strong understanding of safe working practices Desirable Experience on RC Frame, large reinforced concrete structures, or major infrastructure projects Safety Critical Medical IPAF PASMA Confined Space What We Offer Long-term work across multiple projects and project phases Weekly Pay Safety Led Working Environment Ongoing opportunities across Careys projects Apply Online or speak directly to our Trades and Labour Team, Kayleigh on (phone number removed) OR Maddy on (phone number removed).
Jun 16, 2026
Contractor
Description Careys Civil Engineering is recruiting experienced Shuttering Joiners to support the delivery of one of Edinburgh's major city centre regeneration and infrastructure developments. This is long-term work on reinforced concrete and heavy civils schemes, including retaining walls, slabs, pile caps, cores, ground beams and associated RC structures across a large phased programme. Applications from established shuttering gangs are welcome. What you will be doing Carrying out shuttering formwork activities safety and to specification Installing and striking formwork systems Working from drawings and programme requirements Supporting reinforced concrete pours and associated civils activities Maintaining high standards of workmanship, safety and housekeeping Requirements Essential Valid Blue CSCS Skilled Worker card (Min) Proven experience as a Shuttering Joiner on civils, infrastructure, or RC Projects Experience with PERI, Doka or timber formwork systems Ability to read and work from technical drawings Reliable work history, within shuttering/formwork or heavy civils environments Strong understanding of safe working practices Desirable Experience on RC Frame, large reinforced concrete structures, or major infrastructure projects Safety Critical Medical IPAF PASMA Confined Space What We Offer Long-term work across multiple projects and project phases Weekly Pay Safety Led Working Environment Ongoing opportunities across Careys projects Apply Online or speak directly to our Trades and Labour Team, Kayleigh on (phone number removed) OR Maddy on (phone number removed).
We're recruiting on behalf of our client who are looking for a Mechanical bias - Multi Skilled Maintenance Engineer. This business invest time and money in their engineers to improve their skill sets, if this sounds like somewhere you'd like to be then get in contact today. The Person: Worked as a Maintenance Engineer / Maintenance Technician / Multi-skilled Engineer. NVQ Level 3 Trained HNC/HND - Desired Electrical skills and experience would be an advantage Trustworthy, Motivated, Problem Solver Experienced in a FMCG environment Proficient written, numerical, and verbal skills Good computer skills and knowledge of Microsoft office family of products Experience of Maintenance Management Systems & software. The Role: Reactive maintenance - Reacting to breakdowns to ensure production is back running as quick and safely as possible. Attend breakdowns promptly and make repairs to the best quality Complete regular machine maintenance programmes to reduce packing downtime and complete relevant paperwork. PLC fault finding would be an advantage but not essential Project Work (CI / Installation / New Machinery commissioning.) Planned Preventative Maintenance: Ensure planned maintenance is carried out in line with the site schedule. Liaising with other departments to ensure tasks are completed with little to no impact on operations. Manage Health and Safety: Ensure all engineering work carried out in the value stream meets the requirements of Quality, Safety, Health & Environment policies & procedures. Shifts: 4on 4off - 12 hour days & nights - 6 - 6 then 18 days off after you have done 7 sets of shifts. The starting salary will be £52,000pa For more information contact Laura Riding Questech Recruitment.
Jun 16, 2026
Full time
We're recruiting on behalf of our client who are looking for a Mechanical bias - Multi Skilled Maintenance Engineer. This business invest time and money in their engineers to improve their skill sets, if this sounds like somewhere you'd like to be then get in contact today. The Person: Worked as a Maintenance Engineer / Maintenance Technician / Multi-skilled Engineer. NVQ Level 3 Trained HNC/HND - Desired Electrical skills and experience would be an advantage Trustworthy, Motivated, Problem Solver Experienced in a FMCG environment Proficient written, numerical, and verbal skills Good computer skills and knowledge of Microsoft office family of products Experience of Maintenance Management Systems & software. The Role: Reactive maintenance - Reacting to breakdowns to ensure production is back running as quick and safely as possible. Attend breakdowns promptly and make repairs to the best quality Complete regular machine maintenance programmes to reduce packing downtime and complete relevant paperwork. PLC fault finding would be an advantage but not essential Project Work (CI / Installation / New Machinery commissioning.) Planned Preventative Maintenance: Ensure planned maintenance is carried out in line with the site schedule. Liaising with other departments to ensure tasks are completed with little to no impact on operations. Manage Health and Safety: Ensure all engineering work carried out in the value stream meets the requirements of Quality, Safety, Health & Environment policies & procedures. Shifts: 4on 4off - 12 hour days & nights - 6 - 6 then 18 days off after you have done 7 sets of shifts. The starting salary will be £52,000pa For more information contact Laura Riding Questech Recruitment.
An exciting opportunity has become available for a Group Commercial Manager, offering a competitive salary of 80,000 - 100,000, plus 33 days holiday, a competitive pension, BUPA Healthcare, and Death in Service alongside fantastic learning and development opportunities! We welcome candidates to apply from Hull, Sheffield, Bromsgrove or Aberdeen and surrounding areas as the role can be based in any of the UK offices. As the Group Commercial Manager, you will provide commercial leadership across a portfolio of projects, ensuring contracts are managed effectively and projects deliver strong financial and operational outcomes. Partnering with technical, operational, and finance functions, you will influence key business decisions, manage commercial risk, maximise profitability, and support the continued growth of the organisation. Summary of Key Responsibilities of Group Commercial Manager: Lead commercial activities across tenders, proposals, contract negotiations, and project mobilisation. Manage commercial risk, contractual compliance, variations, claims, and change control throughout the project lifecycle. Drive project profitability through effective management of revenue, margins, forecasting, cash flow, and cost control. Ensure robust commercial governance, reporting, and adherence to company policies, contractual obligations, and approval processes. Provide leadership, coaching, and development to commercial, cost, and tendering teams, promoting best practice and consistency. Champion continuous improvement through enhanced commercial processes, governance frameworks, and digital system adoption. Experience and Qualifications required from Group Commercial Manager: Degree qualified in Finance, Quantity Surveying, Business, Law, or a related discipline. Proven commercial and contract management experience within a project-based environment, ideally in engineering, energy, industrial, or technical sectors. Strong understanding of commercial management, contract administration, financial performance, and risk mitigation. Experience working with industry-standard contract forms, including NEC, FIDIC, LOGIC, and/or IChemE. Professional membership or qualification (e.g. RICS, ACCA, CIMA) and experience with ERP systems, project controls, and financial reporting would be advantageous. Knowledge of UK commercial and procurement frameworks, with experience implementing governance processes and driving continuous improvement. If you are a commercially driven leader looking to influence business performance, manage complex projects, and contribute to the success of a growing organisation as a Group Commercial Manager, we would love to hear from you. Please contact Kate Wadsworth at E3 Recruitment or click the link below to apply directly.
Jun 16, 2026
Full time
An exciting opportunity has become available for a Group Commercial Manager, offering a competitive salary of 80,000 - 100,000, plus 33 days holiday, a competitive pension, BUPA Healthcare, and Death in Service alongside fantastic learning and development opportunities! We welcome candidates to apply from Hull, Sheffield, Bromsgrove or Aberdeen and surrounding areas as the role can be based in any of the UK offices. As the Group Commercial Manager, you will provide commercial leadership across a portfolio of projects, ensuring contracts are managed effectively and projects deliver strong financial and operational outcomes. Partnering with technical, operational, and finance functions, you will influence key business decisions, manage commercial risk, maximise profitability, and support the continued growth of the organisation. Summary of Key Responsibilities of Group Commercial Manager: Lead commercial activities across tenders, proposals, contract negotiations, and project mobilisation. Manage commercial risk, contractual compliance, variations, claims, and change control throughout the project lifecycle. Drive project profitability through effective management of revenue, margins, forecasting, cash flow, and cost control. Ensure robust commercial governance, reporting, and adherence to company policies, contractual obligations, and approval processes. Provide leadership, coaching, and development to commercial, cost, and tendering teams, promoting best practice and consistency. Champion continuous improvement through enhanced commercial processes, governance frameworks, and digital system adoption. Experience and Qualifications required from Group Commercial Manager: Degree qualified in Finance, Quantity Surveying, Business, Law, or a related discipline. Proven commercial and contract management experience within a project-based environment, ideally in engineering, energy, industrial, or technical sectors. Strong understanding of commercial management, contract administration, financial performance, and risk mitigation. Experience working with industry-standard contract forms, including NEC, FIDIC, LOGIC, and/or IChemE. Professional membership or qualification (e.g. RICS, ACCA, CIMA) and experience with ERP systems, project controls, and financial reporting would be advantageous. Knowledge of UK commercial and procurement frameworks, with experience implementing governance processes and driving continuous improvement. If you are a commercially driven leader looking to influence business performance, manage complex projects, and contribute to the success of a growing organisation as a Group Commercial Manager, we would love to hear from you. Please contact Kate Wadsworth at E3 Recruitment or click the link below to apply directly.
Senior Electrical Project Manager Bridgwater 90,000 - 120,000 + Travel Allowance + Stay Away Expensed + Discretionary Bonus + Pension + Holidays + Private Medical Insurance + Package + Technical Progression + Immediate Start Take on the role of a Senior Electrical Project Manager with a rapidly growing contractor in the thriving data centre and mission-critical construction sector. This role offers a clear path to progression into senior management. In this role, you will report directly to the Project Director and form part of a leadership team with both operational and client-facing responsibility. You will take full ownership of the electrical package across complex, high-value projects, overseeing everything from design coordination and technical reviews through to subcontractor management, commissioning, and handover. This is a fast-paced, delivery-focused environment where your ability to drive programme, manage risk, and lead teams will be critical. You will lead electrical teams on site, manage daily activity across contractors and vendors, and ensure full compliance across mission critical builds, particularly around power, distribution, and critical electrical infrastructure. Your Role as a Senior Electrical Project Manager Will Include: Take ownership of electrical packages from design through to commissioning and handover Establish risk and opportunity management procedures, including early warning systems Drive value engineering and technical solutions across electrical works Oversee subcontractor management, procurement, programme, and cost control As a Senior Electrical Project Manager, You Will Have: Strong electrical building services background Proven experience delivering complex projects within data centres, pharmaceutical, industrial, or mission critical environments Track record of managing high-value electrical packages within fast-paced, structured construction environments
Jun 16, 2026
Full time
Senior Electrical Project Manager Bridgwater 90,000 - 120,000 + Travel Allowance + Stay Away Expensed + Discretionary Bonus + Pension + Holidays + Private Medical Insurance + Package + Technical Progression + Immediate Start Take on the role of a Senior Electrical Project Manager with a rapidly growing contractor in the thriving data centre and mission-critical construction sector. This role offers a clear path to progression into senior management. In this role, you will report directly to the Project Director and form part of a leadership team with both operational and client-facing responsibility. You will take full ownership of the electrical package across complex, high-value projects, overseeing everything from design coordination and technical reviews through to subcontractor management, commissioning, and handover. This is a fast-paced, delivery-focused environment where your ability to drive programme, manage risk, and lead teams will be critical. You will lead electrical teams on site, manage daily activity across contractors and vendors, and ensure full compliance across mission critical builds, particularly around power, distribution, and critical electrical infrastructure. Your Role as a Senior Electrical Project Manager Will Include: Take ownership of electrical packages from design through to commissioning and handover Establish risk and opportunity management procedures, including early warning systems Drive value engineering and technical solutions across electrical works Oversee subcontractor management, procurement, programme, and cost control As a Senior Electrical Project Manager, You Will Have: Strong electrical building services background Proven experience delivering complex projects within data centres, pharmaceutical, industrial, or mission critical environments Track record of managing high-value electrical packages within fast-paced, structured construction environments
MAINTENANCE ENGINEER Job Title Maintenance Engineer Location Basildon, Essex Salary £45,000 £46,500 Shift Rotating Days (Early & Late Shift Pattern + Saturdays) Job Role of the Maintenance Engineer A fantastic opportunity has arisen for a Multi Skilled Maintenance Engineer to join a highly automated and modern manufacturing facility within a global organisation. This site has seen continued investment and offers a clean, structured environment with strong opportunities for training, development, and progression. Working as part of the engineering team, you will be responsible for both planned and reactive maintenance across a range of specialist production equipment. With a strong focus on preventative maintenance (approx. 60%), this role is ideal for an engineer who enjoys improving reliability, reducing downtime, and contributing to continuous improvement initiatives. The site operates large-scale, high-speed production lines within a COMAH-regulated environment, offering exposure to advanced machinery and processes. Sector Factory Maintenance Non-Negotiable Requirements of the Maintenance Engineer Level 3 in Engineering or Above Previous UK experience as a Maintenance Engineer Requirements for the Maintenance Engineer Multi-skilled engineer (electrical or mechanical bias) Strong fault-finding skills across electrical and/or mechanical systems Experience working with PLC fault finding, control panels, sensors, and drives Knowledge of hydraulics and pneumatics Experience using CMMS systems and working to maintenance schedules Engineering qualification (apprentice trained or equivalent Level 3) Desirable Requirements for the Maintenance Engineer Experience within a COMAH or highly regulated environment Strong understanding of continuous improvement and OEE Experience working on high-speed or automated production lines The Maintenance Engineer will benefit from: Working for a global, market-leading manufacturing business Profit-related bonus scheme Excellent overtime opportunities to increase earnings Pension and life assurance 25 days holiday plus bank holidays Ongoing training and development across a wide range of equipment Modern, open-plan production environment Clear progression opportunities as the business continues to invest
Jun 16, 2026
Full time
MAINTENANCE ENGINEER Job Title Maintenance Engineer Location Basildon, Essex Salary £45,000 £46,500 Shift Rotating Days (Early & Late Shift Pattern + Saturdays) Job Role of the Maintenance Engineer A fantastic opportunity has arisen for a Multi Skilled Maintenance Engineer to join a highly automated and modern manufacturing facility within a global organisation. This site has seen continued investment and offers a clean, structured environment with strong opportunities for training, development, and progression. Working as part of the engineering team, you will be responsible for both planned and reactive maintenance across a range of specialist production equipment. With a strong focus on preventative maintenance (approx. 60%), this role is ideal for an engineer who enjoys improving reliability, reducing downtime, and contributing to continuous improvement initiatives. The site operates large-scale, high-speed production lines within a COMAH-regulated environment, offering exposure to advanced machinery and processes. Sector Factory Maintenance Non-Negotiable Requirements of the Maintenance Engineer Level 3 in Engineering or Above Previous UK experience as a Maintenance Engineer Requirements for the Maintenance Engineer Multi-skilled engineer (electrical or mechanical bias) Strong fault-finding skills across electrical and/or mechanical systems Experience working with PLC fault finding, control panels, sensors, and drives Knowledge of hydraulics and pneumatics Experience using CMMS systems and working to maintenance schedules Engineering qualification (apprentice trained or equivalent Level 3) Desirable Requirements for the Maintenance Engineer Experience within a COMAH or highly regulated environment Strong understanding of continuous improvement and OEE Experience working on high-speed or automated production lines The Maintenance Engineer will benefit from: Working for a global, market-leading manufacturing business Profit-related bonus scheme Excellent overtime opportunities to increase earnings Pension and life assurance 25 days holiday plus bank holidays Ongoing training and development across a wide range of equipment Modern, open-plan production environment Clear progression opportunities as the business continues to invest
Senior Controls Engineer Sustaining Bristol Hybrid Working Competitive Salary + Benefits BMR Solutions are working with a global engineering and technology manufacturer to recruit a Senior Controls Engineer Sustaining to join their established engineering team in Bristol. This is an excellent opportunity for an experienced Controls Engineer to support the ongoing development, maintenance, and improvement of control and visualisation software used within advanced industrial products. The role offers a mix of software development, technical problem-solving, and continuous improvement within a highly collaborative engineering environment. The Role Reporting to the Controls Engineering Manager, you will be responsible for developing and maintaining control software, producing software specifications, supporting testing and validation activities, and investigating technical and quality issues. You will contribute to software release processes, technical documentation, and the continuous improvement of engineering procedures and development practices. Working closely with multidisciplinary engineering teams, you will play a key role in ensuring software solutions meet performance, quality, and reliability requirements while supporting product lifecycle improvements. About You We are looking for an experienced controls or software engineer with a strong background in industrial control systems and software development. Applicants should have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. Minimum 5 years' experience within controls and software engineering. Experience developing HMI applications using VB.Net or similar high-level programming languages. Experience compiling, testing, and releasing software within a controlled engineering environment. Knowledge of communication protocols such as Modbus and XML-based systems. Experience producing technical documentation and supporting software configuration management. Understanding of engineering review and risk assessment methodologies such as HAZOP and FMEA. Knowledge of industry standards such as SEMI S2 and SEMI S8 would be advantageous. What's on Offer? Hybrid working arrangement. Opportunity to join a global engineering and technology leader. Varied and technically challenging engineering projects. Strong focus on career development and continuous learning. Comprehensive salary and benefits package. Collaborative and supportive engineering environment. If you are an experienced Controls Engineer looking to join an innovative engineering business where you can make a real impact on product performance and development, we would be keen to hear from you.
Jun 16, 2026
Full time
Senior Controls Engineer Sustaining Bristol Hybrid Working Competitive Salary + Benefits BMR Solutions are working with a global engineering and technology manufacturer to recruit a Senior Controls Engineer Sustaining to join their established engineering team in Bristol. This is an excellent opportunity for an experienced Controls Engineer to support the ongoing development, maintenance, and improvement of control and visualisation software used within advanced industrial products. The role offers a mix of software development, technical problem-solving, and continuous improvement within a highly collaborative engineering environment. The Role Reporting to the Controls Engineering Manager, you will be responsible for developing and maintaining control software, producing software specifications, supporting testing and validation activities, and investigating technical and quality issues. You will contribute to software release processes, technical documentation, and the continuous improvement of engineering procedures and development practices. Working closely with multidisciplinary engineering teams, you will play a key role in ensuring software solutions meet performance, quality, and reliability requirements while supporting product lifecycle improvements. About You We are looking for an experienced controls or software engineer with a strong background in industrial control systems and software development. Applicants should have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. Minimum 5 years' experience within controls and software engineering. Experience developing HMI applications using VB.Net or similar high-level programming languages. Experience compiling, testing, and releasing software within a controlled engineering environment. Knowledge of communication protocols such as Modbus and XML-based systems. Experience producing technical documentation and supporting software configuration management. Understanding of engineering review and risk assessment methodologies such as HAZOP and FMEA. Knowledge of industry standards such as SEMI S2 and SEMI S8 would be advantageous. What's on Offer? Hybrid working arrangement. Opportunity to join a global engineering and technology leader. Varied and technically challenging engineering projects. Strong focus on career development and continuous learning. Comprehensive salary and benefits package. Collaborative and supportive engineering environment. If you are an experienced Controls Engineer looking to join an innovative engineering business where you can make a real impact on product performance and development, we would be keen to hear from you.
We are recruiting for a Sales Executive / Account Manager for an office-based position based in Leicester. Salary: 30,000 - 35,000 per year + Bonus Scheme Job Type: Full-time, Permanent Location: Office based, Leicester LE4 Benefits Company performance bonus scheme. Profit-sharing opportunities. 25 days annual leave. Employee Assistance Programme with 24/7 well being support. Company pension. Life insurance. Company events. On-site parking. Career development and progression opportunities. A supportive and collaborative working environment. About the role: As a Sales Executive / Account Manager, you will take ownership of a portfolio of existing accounts while identifying and securing new business opportunities. You will play a key role in developing customer accounts, responding to enquiries, preparing quotations and converting opportunities into sales. Key Responsibilities Proactively manage and grow revenue across an existing customer base. Identify, pursue and win new business opportunities. Handle inbound and outbound customer calls and enquiries professionally and efficiently. Prepare quotations and follow up effectively to maximise conversion rates. Achieve monthly, quarterly and annual sales targets. Maintain accurate customer records and sales activity within the CRM system. Attend relevant industry events, including exhibitions. Monitor market trends, competitor activity and emerging business opportunities. Skills & Experience Proven experience in sales and account management. A demonstrated track record of meeting or exceeding sales targets. Strong communication, negotiation and relationship-building skills. Highly organised, with excellent time management abilities. Self-motivated, target-driven and commercially aware. Confident using CRM systems and Microsoft Office, particularly Excel. A full UK driving licence. Experience using Sage Accounting software. Experience within B2B industrial, engineering or material handling sectors. If you are an experienced B2B sales professional looking for your next challenge within a growing and respected business, we would love to hear from you. For further information please contact Rebecca on (phone number removed) S14 About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Jun 16, 2026
Full time
We are recruiting for a Sales Executive / Account Manager for an office-based position based in Leicester. Salary: 30,000 - 35,000 per year + Bonus Scheme Job Type: Full-time, Permanent Location: Office based, Leicester LE4 Benefits Company performance bonus scheme. Profit-sharing opportunities. 25 days annual leave. Employee Assistance Programme with 24/7 well being support. Company pension. Life insurance. Company events. On-site parking. Career development and progression opportunities. A supportive and collaborative working environment. About the role: As a Sales Executive / Account Manager, you will take ownership of a portfolio of existing accounts while identifying and securing new business opportunities. You will play a key role in developing customer accounts, responding to enquiries, preparing quotations and converting opportunities into sales. Key Responsibilities Proactively manage and grow revenue across an existing customer base. Identify, pursue and win new business opportunities. Handle inbound and outbound customer calls and enquiries professionally and efficiently. Prepare quotations and follow up effectively to maximise conversion rates. Achieve monthly, quarterly and annual sales targets. Maintain accurate customer records and sales activity within the CRM system. Attend relevant industry events, including exhibitions. Monitor market trends, competitor activity and emerging business opportunities. Skills & Experience Proven experience in sales and account management. A demonstrated track record of meeting or exceeding sales targets. Strong communication, negotiation and relationship-building skills. Highly organised, with excellent time management abilities. Self-motivated, target-driven and commercially aware. Confident using CRM systems and Microsoft Office, particularly Excel. A full UK driving licence. Experience using Sage Accounting software. Experience within B2B industrial, engineering or material handling sectors. If you are an experienced B2B sales professional looking for your next challenge within a growing and respected business, we would love to hear from you. For further information please contact Rebecca on (phone number removed) S14 About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.
Health & Safety Manager Location: Hybrid / UK Wide Salary: 55- 75k+ Company Vehicle + Excellent Benefits We are currently supporting a growing engineering and infrastructure business in the appointment of a Health & Safety Manager to take ownership of the company's Health, Safety, and Integrated Management Systems. This is a fantastic opportunity for an experienced HSE professional to join a forward-thinking organisation operating within highly regulated environments. The successful candidate will play a key role in driving compliance, continuous improvement, and best practice across the business, ensuring the highest standards of safety, sustainability, and operational excellence are maintained. The Role Reporting directly to senior leadership, you will be responsible for the development, management, and continual improvement of the company's Integrated Management System (IMS), ensuring compliance with relevant legislation, industry standards, and accreditation requirements. Key responsibilities will include: Managing and maintaining the Integrated Management System as a live and evolving business tool Developing and updating Health & Safety policies, procedures, and supporting documentation Leading external accreditation and audit processes, including ISO certifications, NSAR, UVDB, NERS, and other industry accreditations Managing internal audit programmes and non-conformance processes Advising senior management on compliance requirements, risk management strategies, and best practice Driving the implementation and continuous improvement of HSE processes across the business Conducting site inspections, audits, and Health & Safety tours Supporting project teams with risk assessments and safe delivery methodologies Reviewing and auditing subcontractors and suppliers to ensure compliance with HSE requirements Planning and delivering engaging safety workshops and workforce training initiatives Monitoring HSE performance metrics and producing reports with recommendations for improvement Supporting accident investigations, incident reporting, and corrective action programmes About You To be successful in this role, you will have: A minimum of 5 years' Health & Safety management experience within engineering, construction, utilities, infrastructure, or a related sector Proven experience developing and maintaining Integrated Management Systems Strong working knowledge of ISO 9001, ISO 14001, and ISO 45001 standards Experience drafting and implementing Health & Safety policies and procedures Excellent communication, stakeholder management, and organisational skills Experience working within project-led and highly regulated environments Practical knowledge of contractor management, incident investigation, risk management & CDM Regulations and associated legislation A current understanding of HNC qualification in a relevant discipline or equivalent experience NEBOSH General Certificate, Construction Certificate, or NVQ Level 3 minimum Desirable IOSH Membership IEMA Foundation Certificate in Environmental Management Experience managing external accreditations and certification audits What's on Offer Competitive salary package dependent on experience Company pension scheme Private healthcare following successful completion of probation Fully expensed company vehicle and fuel card Ongoing professional development and training support Structured career progression opportunities If you're an experienced Health & Safety professional looking for a role where you can genuinely influence company culture, standards, and long-term success, we'd be interested in speaking with you. For a confidential discussion or to apply, please get in touch with your CV today.
Jun 16, 2026
Full time
Health & Safety Manager Location: Hybrid / UK Wide Salary: 55- 75k+ Company Vehicle + Excellent Benefits We are currently supporting a growing engineering and infrastructure business in the appointment of a Health & Safety Manager to take ownership of the company's Health, Safety, and Integrated Management Systems. This is a fantastic opportunity for an experienced HSE professional to join a forward-thinking organisation operating within highly regulated environments. The successful candidate will play a key role in driving compliance, continuous improvement, and best practice across the business, ensuring the highest standards of safety, sustainability, and operational excellence are maintained. The Role Reporting directly to senior leadership, you will be responsible for the development, management, and continual improvement of the company's Integrated Management System (IMS), ensuring compliance with relevant legislation, industry standards, and accreditation requirements. Key responsibilities will include: Managing and maintaining the Integrated Management System as a live and evolving business tool Developing and updating Health & Safety policies, procedures, and supporting documentation Leading external accreditation and audit processes, including ISO certifications, NSAR, UVDB, NERS, and other industry accreditations Managing internal audit programmes and non-conformance processes Advising senior management on compliance requirements, risk management strategies, and best practice Driving the implementation and continuous improvement of HSE processes across the business Conducting site inspections, audits, and Health & Safety tours Supporting project teams with risk assessments and safe delivery methodologies Reviewing and auditing subcontractors and suppliers to ensure compliance with HSE requirements Planning and delivering engaging safety workshops and workforce training initiatives Monitoring HSE performance metrics and producing reports with recommendations for improvement Supporting accident investigations, incident reporting, and corrective action programmes About You To be successful in this role, you will have: A minimum of 5 years' Health & Safety management experience within engineering, construction, utilities, infrastructure, or a related sector Proven experience developing and maintaining Integrated Management Systems Strong working knowledge of ISO 9001, ISO 14001, and ISO 45001 standards Experience drafting and implementing Health & Safety policies and procedures Excellent communication, stakeholder management, and organisational skills Experience working within project-led and highly regulated environments Practical knowledge of contractor management, incident investigation, risk management & CDM Regulations and associated legislation A current understanding of HNC qualification in a relevant discipline or equivalent experience NEBOSH General Certificate, Construction Certificate, or NVQ Level 3 minimum Desirable IOSH Membership IEMA Foundation Certificate in Environmental Management Experience managing external accreditations and certification audits What's on Offer Competitive salary package dependent on experience Company pension scheme Private healthcare following successful completion of probation Fully expensed company vehicle and fuel card Ongoing professional development and training support Structured career progression opportunities If you're an experienced Health & Safety professional looking for a role where you can genuinely influence company culture, standards, and long-term success, we'd be interested in speaking with you. For a confidential discussion or to apply, please get in touch with your CV today.
Account Manager 32,000 - 35,000 per annum TeamJobs are delighted to be recruiting for an experienced Account Manager to join a well-established manufacturing business. This is an excellent opportunity for a customer-focused professional who enjoys building strong client relationships, managing key accounts, and working closely with internal teams to ensure exceptional service delivery. Working within a fast-paced manufacturing environment, you will be the primary point of contact for a portfolio of key customers, ensuring projects, orders, and customer requirements are managed efficiently from enquiry through to delivery. Key Responsibilities Act as the main point of contact for a portfolio of key customer accounts Build and maintain strong customer relationships, including visiting customer sites when required Produce and maintain account plans to meet both business and customer objectives Manage the repeat order and contract review process, ensuring materials, engineering resources, and production capacity are aligned with customer requirements Work closely with purchasing teams to ensure materials are available to meet delivery schedules Support engineering teams with administration tasks, including Bills of Materials (BOMs) and MRP system updates when required Expedite and resolve issues that may impact delivery dates or customer commitments Identify opportunities to grow existing accounts and promote additional services Prepare and negotiate quotations for existing customers Liaise with internal departments to resolve technical queries and operational challenges Provide regular updates and present relevant data to customers About You To be successful in this role, you will have: Essential Previous Account Management and/or customer service experience Experience working within a manufacturing environment Excellent communication and relationship-building skills Strong organisational, planning, and prioritisation abilities Proficiency in Microsoft Office, including Excel, Word, and PowerPoint Confidence presenting information and data to customers A proactive approach with strong problem-solving skills Desirable Experience within an electronics manufacturing or CEM environment Understanding of electronics production processes Experience using MRP systems What's on Offer? Salary of 32,000 - 35,000 per annum Opportunity to join a successful and growing manufacturing business Varied and customer-focused role with excellent exposure across the business Long-term career development opportunities Supportive and collaborative working environment If you have Account Management experience within manufacturing and are looking for your next challenge, we'd love to hear from you. To apply, contact TeamJobs today on (phone number removed). TJCOM
Jun 16, 2026
Full time
Account Manager 32,000 - 35,000 per annum TeamJobs are delighted to be recruiting for an experienced Account Manager to join a well-established manufacturing business. This is an excellent opportunity for a customer-focused professional who enjoys building strong client relationships, managing key accounts, and working closely with internal teams to ensure exceptional service delivery. Working within a fast-paced manufacturing environment, you will be the primary point of contact for a portfolio of key customers, ensuring projects, orders, and customer requirements are managed efficiently from enquiry through to delivery. Key Responsibilities Act as the main point of contact for a portfolio of key customer accounts Build and maintain strong customer relationships, including visiting customer sites when required Produce and maintain account plans to meet both business and customer objectives Manage the repeat order and contract review process, ensuring materials, engineering resources, and production capacity are aligned with customer requirements Work closely with purchasing teams to ensure materials are available to meet delivery schedules Support engineering teams with administration tasks, including Bills of Materials (BOMs) and MRP system updates when required Expedite and resolve issues that may impact delivery dates or customer commitments Identify opportunities to grow existing accounts and promote additional services Prepare and negotiate quotations for existing customers Liaise with internal departments to resolve technical queries and operational challenges Provide regular updates and present relevant data to customers About You To be successful in this role, you will have: Essential Previous Account Management and/or customer service experience Experience working within a manufacturing environment Excellent communication and relationship-building skills Strong organisational, planning, and prioritisation abilities Proficiency in Microsoft Office, including Excel, Word, and PowerPoint Confidence presenting information and data to customers A proactive approach with strong problem-solving skills Desirable Experience within an electronics manufacturing or CEM environment Understanding of electronics production processes Experience using MRP systems What's on Offer? Salary of 32,000 - 35,000 per annum Opportunity to join a successful and growing manufacturing business Varied and customer-focused role with excellent exposure across the business Long-term career development opportunities Supportive and collaborative working environment If you have Account Management experience within manufacturing and are looking for your next challenge, we'd love to hear from you. To apply, contact TeamJobs today on (phone number removed). TJCOM
Ernest Gordon Recruitment Limited
Astwood Bank, Worcestershire
Quality Engineer (Manufacturing) Redditch 30,000 - 35,000 + Early Friday Finish + Company Benefits + Progression + Training Are you a Quality Engineer from a manufacturing or automotive background with some auditing experience and basic IT Skills looking to progress and build on your skillset? Do you want to work for a company which can provide a family-feel like space with great staff retention and great progression routes with training programs at the ready? On offer is the chance to step into a permanent and long-term progressive role within a friendly and welcoming company. In this role you will be both on the shop floor raising quality inspections, handling customer complaints, implementing PPAP and the occasional in-house audits. This fabrication and machining company, founded over 20 years ago, boast a stable track record with repeat clients, selling primarily into the agricultural industry, whom also pride themselves with excellent staff retention through having a enjoyable working environment. This role: Split between the workshop and office Measuring and inspecting parts using instruments like verniers and CMM Handling customer complaints and conducting internal audits Monday - Thursday, 8 am - 5 pm, finish 8am-1pm on a Friday The person: Quality systems experience Manufacturing background Auditing experience Quality Engineering Reference: BBBH If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Jun 16, 2026
Full time
Quality Engineer (Manufacturing) Redditch 30,000 - 35,000 + Early Friday Finish + Company Benefits + Progression + Training Are you a Quality Engineer from a manufacturing or automotive background with some auditing experience and basic IT Skills looking to progress and build on your skillset? Do you want to work for a company which can provide a family-feel like space with great staff retention and great progression routes with training programs at the ready? On offer is the chance to step into a permanent and long-term progressive role within a friendly and welcoming company. In this role you will be both on the shop floor raising quality inspections, handling customer complaints, implementing PPAP and the occasional in-house audits. This fabrication and machining company, founded over 20 years ago, boast a stable track record with repeat clients, selling primarily into the agricultural industry, whom also pride themselves with excellent staff retention through having a enjoyable working environment. This role: Split between the workshop and office Measuring and inspecting parts using instruments like verniers and CMM Handling customer complaints and conducting internal audits Monday - Thursday, 8 am - 5 pm, finish 8am-1pm on a Friday The person: Quality systems experience Manufacturing background Auditing experience Quality Engineering Reference: BBBH If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Ready to work on control panel projects supporting the UK s water, wastewater and process industries? This is an exciting opportunity to join a well-established and respected engineering business specialising in the design, manufacture and installation of electrical control panels. With ambitious growth plans and a strong pipeline of projects, this company offers long-term stability, technical variety and genuine career development. Electrical Design Engineer £32-50k + Bonus, Pension, Training & Flexible Working Herefordshire. Ref: 2538 1 Perfect for a Control Panel Design Engineer who enjoys a mix of design, testing and hands-on engineering, this role offers involvement from initial design through to FAT, SAT and commissioning activities. Electrical Design Engineer - The Role: Design electrical control panels in line with customer and industry standards Produce technical documentation using EPLAN design software Support inspection, testing and fault finding activities Carry out FAT and SAT activities with customers Support on-site commissioning projects across the UK when required Provide technical support across the wider business Electrical Design Engineer - What We re Looking For: Electrical/Electronic Engineering qualification (BTEC/NVQ Level 3 or above) Knowledge of electrical systems, components and circuits Experience with Control Panel or MCC Design beneficial Experience using CAD/EPLAN software advantageous Strong problem-solving skills with a practical engineering mindset Able to work independently and as part of a close-knit engineering team Full UK driving licence required Why Join? Growing business with exciting long-term expansion plans Varied role combining design, testing and commissioning Training and development opportunities provided Annual bonus and excellent overall benefits package Additional holiday entitlement with service Pension, enhanced family benefits, paid travel expenses and free parking Interested? - Located in Herefordshire, this role would be commutable from Hereford, Ross-on-Wye, Leominster, Bromyard and other surrounding areas. If you re looking for a role where you can develop your electrical design skills and work on varied industrial projects within a supportive engineering environment, we d love to hear from you! Contact Sharon Hill on (phone number removed).
Jun 16, 2026
Full time
Ready to work on control panel projects supporting the UK s water, wastewater and process industries? This is an exciting opportunity to join a well-established and respected engineering business specialising in the design, manufacture and installation of electrical control panels. With ambitious growth plans and a strong pipeline of projects, this company offers long-term stability, technical variety and genuine career development. Electrical Design Engineer £32-50k + Bonus, Pension, Training & Flexible Working Herefordshire. Ref: 2538 1 Perfect for a Control Panel Design Engineer who enjoys a mix of design, testing and hands-on engineering, this role offers involvement from initial design through to FAT, SAT and commissioning activities. Electrical Design Engineer - The Role: Design electrical control panels in line with customer and industry standards Produce technical documentation using EPLAN design software Support inspection, testing and fault finding activities Carry out FAT and SAT activities with customers Support on-site commissioning projects across the UK when required Provide technical support across the wider business Electrical Design Engineer - What We re Looking For: Electrical/Electronic Engineering qualification (BTEC/NVQ Level 3 or above) Knowledge of electrical systems, components and circuits Experience with Control Panel or MCC Design beneficial Experience using CAD/EPLAN software advantageous Strong problem-solving skills with a practical engineering mindset Able to work independently and as part of a close-knit engineering team Full UK driving licence required Why Join? Growing business with exciting long-term expansion plans Varied role combining design, testing and commissioning Training and development opportunities provided Annual bonus and excellent overall benefits package Additional holiday entitlement with service Pension, enhanced family benefits, paid travel expenses and free parking Interested? - Located in Herefordshire, this role would be commutable from Hereford, Ross-on-Wye, Leominster, Bromyard and other surrounding areas. If you re looking for a role where you can develop your electrical design skills and work on varied industrial projects within a supportive engineering environment, we d love to hear from you! Contact Sharon Hill on (phone number removed).
Commercial Plumber/Legionella Risk Assessor - Glasgow - Salary up to 35,000 DOE CBW are currently looking for an experienced Commercial Plumber who is experienced in carrying out Legionella Risk Assessments. This is an excellent opportunity for a motivated and skilled individual looking to work across a varied portfolio of commercial and residential sites. Key Responsibilities: Carry out planned and reactive plumbing maintenance works across a range of properties. Undertake Legionella Risk Assessments in line with current ACoP L8 and HSG274 guidelines. Identify and report risks, remedial actions, and compliance issues. Complete water hygiene tasks including temperature monitoring, flushing, and sampling where required. Produce accurate reports and maintain detailed records using company systems. Liaise professionally with clients, tenants, and internal teams to ensure high service standards. Ensure all works are completed safely and in compliance with health & safety regulations. Person Specification: Time-served / qualified Plumber (NVQ Level 2/3 or equivalent preferred). Experience carrying out Legionella Risk Assessments and strong knowledge of water hygiene regulations. Legionella Risk Assessment qualification (desirable but not essential depending on experience). Good understanding of ACoP L8 and associated compliance standards. Full UK driving licence essential. Strong communication and reporting skills. Ability to work independently and manage your own workload. Salary & Benefits: Salary up to 34,000 Van and fuel card 25 days annual leave plus 8 bank holidays Company pension and overtime rates
Jun 16, 2026
Full time
Commercial Plumber/Legionella Risk Assessor - Glasgow - Salary up to 35,000 DOE CBW are currently looking for an experienced Commercial Plumber who is experienced in carrying out Legionella Risk Assessments. This is an excellent opportunity for a motivated and skilled individual looking to work across a varied portfolio of commercial and residential sites. Key Responsibilities: Carry out planned and reactive plumbing maintenance works across a range of properties. Undertake Legionella Risk Assessments in line with current ACoP L8 and HSG274 guidelines. Identify and report risks, remedial actions, and compliance issues. Complete water hygiene tasks including temperature monitoring, flushing, and sampling where required. Produce accurate reports and maintain detailed records using company systems. Liaise professionally with clients, tenants, and internal teams to ensure high service standards. Ensure all works are completed safely and in compliance with health & safety regulations. Person Specification: Time-served / qualified Plumber (NVQ Level 2/3 or equivalent preferred). Experience carrying out Legionella Risk Assessments and strong knowledge of water hygiene regulations. Legionella Risk Assessment qualification (desirable but not essential depending on experience). Good understanding of ACoP L8 and associated compliance standards. Full UK driving licence essential. Strong communication and reporting skills. Ability to work independently and manage your own workload. Salary & Benefits: Salary up to 34,000 Van and fuel card 25 days annual leave plus 8 bank holidays Company pension and overtime rates
About the Employer This organisation operates within the global automotive and industrial manufacturing sector, delivering advanced technologies and engineered components that support vehicle efficiency, sustainability, and aftermarket performance. With an international footprint and a strong reputation for innovation, the business is committed to developing cleaner, more efficient solutions while fostering a collaborative and inclusive workplace culture. Business Development Specialist Automotive Aftermarket An exciting opportunity has arisen for an experienced Business Development Specialist to join a leading organisation within the automotive aftermarket sector. This role is ideal for a commercially driven professional with strong relationship-building skills and a passion for customer engagement, market development, and business growth. Working closely with internal commercial, technical, logistics, and marketing teams, you will play a key role in supporting existing distributor relationships, identifying new business opportunities, and driving continuous improvement initiatives. The successful candidate will thrive in a fast-paced environment and enjoy working within an innovative business focused on sustainability and customer excellence. Duties & Responsibilities Build and strengthen relationships with existing distributor and customer accounts in the automotive aftermarket. Support the development and execution of regional commercial strategies. Identify and pursue opportunities to grow customer portfolios and business revenue. Monitor market trends and competitor activity, providing regular commercial insights. Collaborate with internal departments including marketing, logistics, technical, and sales teams. Attend customer meetings, trade exhibitions, industry events, and promotional activities. Maintain accurate customer and sales information within CRM systems. Deliver high levels of customer service while supporting continuous business improvement initiatives. Education & Skills Required Previous experience within a business development, sales, or customer-facing commercial role. Strong understanding of the automotive industry and aftermarket sector would be highly advantageous. Excellent communication, interpersonal, and presentation skills. Strong problem-solving, and organisational abilities. Proficiency in Microsoft Office and digital business tools, including CRM systems and data platforms. UK driving license. If you are a motivated and customer-focused professional looking to develop your sales career within a forward-thinking automotive business, we would love to hear from you. Apply today to become part of an innovative organisation shaping the future of sustainable mobility.
Jun 16, 2026
Full time
About the Employer This organisation operates within the global automotive and industrial manufacturing sector, delivering advanced technologies and engineered components that support vehicle efficiency, sustainability, and aftermarket performance. With an international footprint and a strong reputation for innovation, the business is committed to developing cleaner, more efficient solutions while fostering a collaborative and inclusive workplace culture. Business Development Specialist Automotive Aftermarket An exciting opportunity has arisen for an experienced Business Development Specialist to join a leading organisation within the automotive aftermarket sector. This role is ideal for a commercially driven professional with strong relationship-building skills and a passion for customer engagement, market development, and business growth. Working closely with internal commercial, technical, logistics, and marketing teams, you will play a key role in supporting existing distributor relationships, identifying new business opportunities, and driving continuous improvement initiatives. The successful candidate will thrive in a fast-paced environment and enjoy working within an innovative business focused on sustainability and customer excellence. Duties & Responsibilities Build and strengthen relationships with existing distributor and customer accounts in the automotive aftermarket. Support the development and execution of regional commercial strategies. Identify and pursue opportunities to grow customer portfolios and business revenue. Monitor market trends and competitor activity, providing regular commercial insights. Collaborate with internal departments including marketing, logistics, technical, and sales teams. Attend customer meetings, trade exhibitions, industry events, and promotional activities. Maintain accurate customer and sales information within CRM systems. Deliver high levels of customer service while supporting continuous business improvement initiatives. Education & Skills Required Previous experience within a business development, sales, or customer-facing commercial role. Strong understanding of the automotive industry and aftermarket sector would be highly advantageous. Excellent communication, interpersonal, and presentation skills. Strong problem-solving, and organisational abilities. Proficiency in Microsoft Office and digital business tools, including CRM systems and data platforms. UK driving license. If you are a motivated and customer-focused professional looking to develop your sales career within a forward-thinking automotive business, we would love to hear from you. Apply today to become part of an innovative organisation shaping the future of sustainable mobility.
Position: IMS Core Engineer Location: Reading and customer offices as required Salary: On Application Duration: Ongoing Hours: Monday-Friday, 9am-5:30pm Overview of an IMS Core Engineer As an IMS Core Engineer, you'll be part of a specialist technical team responsible for testing, validating, and supporting mission critical communication solutions. This role is key to ensuring the performance, availability, and reliability of IMS Core services across Core, RAN, and Application layers. You'll work closely with test, support, and delivery teams to ensure systems meet customer expectations, contractual milestones, and service level agreements. Responsibilities of an IMS Core Engineer • Provide technical expertise in IMS Core and MCX, supporting the definition and execution of test strategies for all network elements and software releases. • Define and execute Functional, Performance, Accessibility, and Compatibility testing to agreed project timelines. • Perform end-to-end testing, deep dive analysis, and root cause investigation across LTE and TETRA networks. • Execute software upgrades, regression testing, and lifecycle testing on VNF-based Core nodes deployed on VMware architecture. • Track test progress, manage defects, and maintain detailed test execution reports and performance logs. • Support integration and client testing environments, providing technical analysis, logs, and feedback to internal teams and third parties. Key Competencies of an IMS Core Engineer • Strong background in IMS Core technologies, particularly IMS Voice, Video, and Data services. • Hands-on experience with IMS and VoLTE architecture, interfaces, and protocols. • Proficiency with LTE testing and analysis tools including Wireshark, SIP/RTP/RTCP/Diameter tracing, IXIA, Viavi, Spirent, XCAL, QXDM, Jira, Logcat, and Putty. • Experience with VNF architecture deployments and software lifecycle testing on VMware platforms. • In-depth knowledge of 3GPP specifications and Mission Critical features. • Excellent analytical, troubleshooting, and communication skills. • Degree in Computer Science, Electronics, Telecommunications, or equivalent professional experience. • Flexibility to support on-call working and travel to customer locations as required. Benefits: • Generous holiday entitlement, plus additional birthday leave and bank holidays. • Staff sales discount, Reward Plus shopping discount, and volunteering days. • Government pension auto-enrolment and pension contribution from 12 weeks. • Subsidized staff restaurant, onsite parking, and free shuttle bus service (from Weybridge & Woking Station) Due to the large volume of applications we receive for each position we will only be able to respond to applications received with the relevant skills. Should you not hear from us within a week, unfortunately on this occasion your application has been unsuccessful. March Recruitment is an equal opportunities employer and complies with all relevant UK legislation. Please note that by applying for this vacancy you accept March Recruitment's Privacy Policy and GDPR Policy which can be found on our website and therefore give us consent to contact you. Consultant - Charlie Shepherd
Jun 16, 2026
Seasonal
Position: IMS Core Engineer Location: Reading and customer offices as required Salary: On Application Duration: Ongoing Hours: Monday-Friday, 9am-5:30pm Overview of an IMS Core Engineer As an IMS Core Engineer, you'll be part of a specialist technical team responsible for testing, validating, and supporting mission critical communication solutions. This role is key to ensuring the performance, availability, and reliability of IMS Core services across Core, RAN, and Application layers. You'll work closely with test, support, and delivery teams to ensure systems meet customer expectations, contractual milestones, and service level agreements. Responsibilities of an IMS Core Engineer • Provide technical expertise in IMS Core and MCX, supporting the definition and execution of test strategies for all network elements and software releases. • Define and execute Functional, Performance, Accessibility, and Compatibility testing to agreed project timelines. • Perform end-to-end testing, deep dive analysis, and root cause investigation across LTE and TETRA networks. • Execute software upgrades, regression testing, and lifecycle testing on VNF-based Core nodes deployed on VMware architecture. • Track test progress, manage defects, and maintain detailed test execution reports and performance logs. • Support integration and client testing environments, providing technical analysis, logs, and feedback to internal teams and third parties. Key Competencies of an IMS Core Engineer • Strong background in IMS Core technologies, particularly IMS Voice, Video, and Data services. • Hands-on experience with IMS and VoLTE architecture, interfaces, and protocols. • Proficiency with LTE testing and analysis tools including Wireshark, SIP/RTP/RTCP/Diameter tracing, IXIA, Viavi, Spirent, XCAL, QXDM, Jira, Logcat, and Putty. • Experience with VNF architecture deployments and software lifecycle testing on VMware platforms. • In-depth knowledge of 3GPP specifications and Mission Critical features. • Excellent analytical, troubleshooting, and communication skills. • Degree in Computer Science, Electronics, Telecommunications, or equivalent professional experience. • Flexibility to support on-call working and travel to customer locations as required. Benefits: • Generous holiday entitlement, plus additional birthday leave and bank holidays. • Staff sales discount, Reward Plus shopping discount, and volunteering days. • Government pension auto-enrolment and pension contribution from 12 weeks. • Subsidized staff restaurant, onsite parking, and free shuttle bus service (from Weybridge & Woking Station) Due to the large volume of applications we receive for each position we will only be able to respond to applications received with the relevant skills. Should you not hear from us within a week, unfortunately on this occasion your application has been unsuccessful. March Recruitment is an equal opportunities employer and complies with all relevant UK legislation. Please note that by applying for this vacancy you accept March Recruitment's Privacy Policy and GDPR Policy which can be found on our website and therefore give us consent to contact you. Consultant - Charlie Shepherd
Sales Manager Location: UK - National Travel Required Salary: 55,000- 65,000 basic (DOE) + bonus + company package The Opportunity We are recruiting for an experienced Sales Manager to join a leading business operating within the metrology and precision measurement sector . This is a national role focused on driving new business growth, managing key accounts, and expanding presence across a range of engineering and manufacturing industries. You will be working with high-value, technical solutions used in quality control, inspection, and precision engineering environments, engaging with OEMs, Tier 1 suppliers, and manufacturing clients across the UK. Key Responsibilities Develop and execute a national sales strategy to drive revenue growth within the metrology sector Identify, target, and win new business opportunities across manufacturing and engineering markets Manage and grow existing key accounts, ensuring long-term customer relationships Sell technical metrology solutions including measurement systems, inspection equipment, and related services Engage with quality, production, and engineering teams at client sites Lead the full sales cycle from prospecting through to negotiation and closure Attend client meetings, site visits, and industry exhibitions nationwide Work closely with internal technical and service teams to deliver tailored solutions Maintain accurate pipeline forecasting and CRM reporting Requirements Proven experience in a Sales Manager / Business Development role within metrology or precision measurement (essential) Strong understanding of inspection, calibration, CMMs, or dimensional measurement systems Background in engineering, manufacturing, or technical sales environments Demonstrated success in winning new business and managing key accounts Strong commercial awareness with excellent negotiation skills Ability to communicate effectively with technical and non-technical stakeholders Full UK driving licence and willingness to travel nationally What's on Offer Minimum 55,000 basic salary (higher DOE) Uncapped bonus structure Company car / car allowance Opportunity to join a growing technical engineering business National autonomy and ownership of your territory Long-term career progression within a specialist technical secto WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.
Jun 16, 2026
Full time
Sales Manager Location: UK - National Travel Required Salary: 55,000- 65,000 basic (DOE) + bonus + company package The Opportunity We are recruiting for an experienced Sales Manager to join a leading business operating within the metrology and precision measurement sector . This is a national role focused on driving new business growth, managing key accounts, and expanding presence across a range of engineering and manufacturing industries. You will be working with high-value, technical solutions used in quality control, inspection, and precision engineering environments, engaging with OEMs, Tier 1 suppliers, and manufacturing clients across the UK. Key Responsibilities Develop and execute a national sales strategy to drive revenue growth within the metrology sector Identify, target, and win new business opportunities across manufacturing and engineering markets Manage and grow existing key accounts, ensuring long-term customer relationships Sell technical metrology solutions including measurement systems, inspection equipment, and related services Engage with quality, production, and engineering teams at client sites Lead the full sales cycle from prospecting through to negotiation and closure Attend client meetings, site visits, and industry exhibitions nationwide Work closely with internal technical and service teams to deliver tailored solutions Maintain accurate pipeline forecasting and CRM reporting Requirements Proven experience in a Sales Manager / Business Development role within metrology or precision measurement (essential) Strong understanding of inspection, calibration, CMMs, or dimensional measurement systems Background in engineering, manufacturing, or technical sales environments Demonstrated success in winning new business and managing key accounts Strong commercial awareness with excellent negotiation skills Ability to communicate effectively with technical and non-technical stakeholders Full UK driving licence and willingness to travel nationally What's on Offer Minimum 55,000 basic salary (higher DOE) Uncapped bonus structure Company car / car allowance Opportunity to join a growing technical engineering business National autonomy and ownership of your territory Long-term career progression within a specialist technical secto WR Engineering are the recruitment partner for engineering, manufacturing & technical sales jobs. We recruit for permanent jobs UK wide. WR is acting as an Employment Agency in relation to this vacancy.
Fitter x2 Location: Wimborne, Dorset Based in Wimborne, Dorset, this aerospace division is a global leader in fuel systems, delivering fully integrated solutions for both fixed and rotary-wing aircraft. The site specialises in cutting-edge air-to-air refuelling systems, advanced refuelling probes, launch systems using both pneumatic and pyrotechnic ejection technologies, and a range of Defensive Aids Sub-Systems. With over 80 years of industry experience, the organisation is recognised as the world's leading provider of air-to-air refuelling systems, delivering fifth-generation capability to air forces worldwide. Benefits Annual incentive plan bonus (VPP) 25 days holiday plus 8 bank holidays Flexible benefits platform (including healthcare, holiday buy/sell, EV purchase schemes) Opportunity to work a 9-day fortnight (role dependent) Agile working options (subject to agreement) Access to healthcare plan Cycle-to-Work Scheme Electric Vehicle Scheme Competitive pension options: 3% employee / 6% employer 4% employee / 7% employer 5% employee / 8% employer What You'll Do Task Management Assemble and test products in line with engineering methods and processes Carry out surveys and repairs to agreed standards Follow quality procedures to maintain compliance with defined processes Autonomy Work independently on assembly tasks with minimal supervision Continuous Improvement Collaborate with the team to identify productivity and performance improvements Support cost reduction initiatives Contribute to lean manufacturing practices Promote health, safety, and environmental improvements within the work area Development & Performance Take ownership of personal development using the skills matrix Participate in annual and interim performance development reviews Communication Attend start-of-shift meetings to understand targets, issues, and updates Participate in end-of-shift reviews to assess performance and outcomes Escalate issues to the Production Supervisor in a timely manner
Jun 16, 2026
Full time
Fitter x2 Location: Wimborne, Dorset Based in Wimborne, Dorset, this aerospace division is a global leader in fuel systems, delivering fully integrated solutions for both fixed and rotary-wing aircraft. The site specialises in cutting-edge air-to-air refuelling systems, advanced refuelling probes, launch systems using both pneumatic and pyrotechnic ejection technologies, and a range of Defensive Aids Sub-Systems. With over 80 years of industry experience, the organisation is recognised as the world's leading provider of air-to-air refuelling systems, delivering fifth-generation capability to air forces worldwide. Benefits Annual incentive plan bonus (VPP) 25 days holiday plus 8 bank holidays Flexible benefits platform (including healthcare, holiday buy/sell, EV purchase schemes) Opportunity to work a 9-day fortnight (role dependent) Agile working options (subject to agreement) Access to healthcare plan Cycle-to-Work Scheme Electric Vehicle Scheme Competitive pension options: 3% employee / 6% employer 4% employee / 7% employer 5% employee / 8% employer What You'll Do Task Management Assemble and test products in line with engineering methods and processes Carry out surveys and repairs to agreed standards Follow quality procedures to maintain compliance with defined processes Autonomy Work independently on assembly tasks with minimal supervision Continuous Improvement Collaborate with the team to identify productivity and performance improvements Support cost reduction initiatives Contribute to lean manufacturing practices Promote health, safety, and environmental improvements within the work area Development & Performance Take ownership of personal development using the skills matrix Participate in annual and interim performance development reviews Communication Attend start-of-shift meetings to understand targets, issues, and updates Participate in end-of-shift reviews to assess performance and outcomes Escalate issues to the Production Supervisor in a timely manner
Maintenance Engineer Job Title Maintenance Engineer Location Liverpool, Merseyside Salary £44,000 (rising to approx. £45,300 in April + 3% review) Shift Rotating Shift Pattern (Days/Nights) Week 1 & 2: 6:00am 2:00pm Week 3: 10:00pm 6:00am (Sunday Thursday) Week 4: 2:00pm 10:00pm (Mon Fri) On-call: 1 weekend in 4 (moving to 1 in 5) Job Role of the Maintenance Engineer A fantastic opportunity has arisen for a Maintenance Engineer to join a leading manufacturer within the waste management and recycling container industry. This is a well-established, internationally backed business with a strong reputation for innovation, investment, and long-term engineering development. You will be responsible for both the maintenance of factory facilities and a wide range of production equipment including machinery, tooling, moulds, and supporting systems. Working as part of a skilled engineering team, you will play a key role in ensuring maximum uptime, efficient production, and continuous improvement across site operations. This is a highly varied role covering both planned preventative maintenance and reactive breakdowns within a fast-paced manufacturing environment. Responsibilities of the Maintenance Engineer Carrying out planned preventative maintenance (PPM) and reactive maintenance Fault finding and repair of mechanical and electrical systems Maintaining factory equipment, machinery, and moulding systems Supporting installation and implementation of new equipment and investments Working closely with the engineering team on maintenance planning Diagnosing faults on control systems including sensors, relays, contactors, and inverters Mechanical work including hydraulics, pneumatics, bearings, belts, and chains Supporting continuous improvement activities across site Participating in on-call rota system Machinery on Site Injection moulding machines Industrial robots Vacuum pumps and vacuum systems Granulators Hydraulic systems Automated production equipment (approx. 2000 units per day output) Sector Industrial Manufacutring Non-Negotiable Requirements Level 3 in Engineering Mechanical Bias Engineer Factory or Manufacturing or Forces Desirable Requirements Injection moulding experience Tooling / toolmaking background Experience in plastics manufacturing Industrial heavy engineering background Forces background considered The Maintenance Engineer will benefit from: Working for a well-established European manufacturing leader Strong investment in training and development Opportunities for external training courses (including Level 4 Injection Moulding) Potential training opportunities in Spain at sister facilities Clear progression and long-term development opportunities Pension scheme Healthcare plan (after 6 months) 25 days holiday + bank holidays Free onsite parking Ongoing salary increases and review
Jun 16, 2026
Full time
Maintenance Engineer Job Title Maintenance Engineer Location Liverpool, Merseyside Salary £44,000 (rising to approx. £45,300 in April + 3% review) Shift Rotating Shift Pattern (Days/Nights) Week 1 & 2: 6:00am 2:00pm Week 3: 10:00pm 6:00am (Sunday Thursday) Week 4: 2:00pm 10:00pm (Mon Fri) On-call: 1 weekend in 4 (moving to 1 in 5) Job Role of the Maintenance Engineer A fantastic opportunity has arisen for a Maintenance Engineer to join a leading manufacturer within the waste management and recycling container industry. This is a well-established, internationally backed business with a strong reputation for innovation, investment, and long-term engineering development. You will be responsible for both the maintenance of factory facilities and a wide range of production equipment including machinery, tooling, moulds, and supporting systems. Working as part of a skilled engineering team, you will play a key role in ensuring maximum uptime, efficient production, and continuous improvement across site operations. This is a highly varied role covering both planned preventative maintenance and reactive breakdowns within a fast-paced manufacturing environment. Responsibilities of the Maintenance Engineer Carrying out planned preventative maintenance (PPM) and reactive maintenance Fault finding and repair of mechanical and electrical systems Maintaining factory equipment, machinery, and moulding systems Supporting installation and implementation of new equipment and investments Working closely with the engineering team on maintenance planning Diagnosing faults on control systems including sensors, relays, contactors, and inverters Mechanical work including hydraulics, pneumatics, bearings, belts, and chains Supporting continuous improvement activities across site Participating in on-call rota system Machinery on Site Injection moulding machines Industrial robots Vacuum pumps and vacuum systems Granulators Hydraulic systems Automated production equipment (approx. 2000 units per day output) Sector Industrial Manufacutring Non-Negotiable Requirements Level 3 in Engineering Mechanical Bias Engineer Factory or Manufacturing or Forces Desirable Requirements Injection moulding experience Tooling / toolmaking background Experience in plastics manufacturing Industrial heavy engineering background Forces background considered The Maintenance Engineer will benefit from: Working for a well-established European manufacturing leader Strong investment in training and development Opportunities for external training courses (including Level 4 Injection Moulding) Potential training opportunities in Spain at sister facilities Clear progression and long-term development opportunities Pension scheme Healthcare plan (after 6 months) 25 days holiday + bank holidays Free onsite parking Ongoing salary increases and review
