Setter/ Operator Welder Fabricator- Lates Job Advert We have a vacancy within our Manufacturing Department and are currently recruiting for the role of Setter/ Operator - Welder Fabricator. We are looking for candidates who have relevant and proven experience seeking an opportunity to develop their skills and join a growing Organisation. Location: Accrofab Alcester Limited B49 6EH Shift Pattern: 39 hours per week working the Late Shift; 16.30 to 02.30 Monday to Wednesday and 16.30 to 01.30 Thursdays with designated breaks. Main duties and responsibilities: Responsibilities specific to the role. Manual TIG welding and fabrication of components to company and customer specification. Understanding of and safe use of air tools and hand tools Read and understand welding symbols as detailed on WPS and Engineering Drawings Ability to correctly set components to casting to suit customer specifications Set up machines with the required work holding and tooling in accordance with relevant procedures. Complete operations efficiently in accordance with Job Card instructions to achieve the required output levels. General responsibilities. Comply with all company Environmental, Health and Safety (EHS) requirements and report any concerns to supervision. Read and understand the requirements on the Job Card for the operation to be carried out. Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. Use of all measuring equipment as necessary to check conformance to requirements. Carry out in process inspection in accordance with requirements to ensure that components are conforming prior to passing on to subsequent operations. Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. Complete all work booking requirements within the MRP system to ensure accurate WIP records. Follow work handling and storage instructions to prevent damage to components. Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated. Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. Engage and contribute to Continuous Improvement activities to maximise efficiency. Comply with all company procedures and policies. Person Specification: 1/2 years' experience in the Aerospace Industry/ Engineering/ Manufacturing/ a similar role is desirable Must become familiar with quality & manufacturing standards and maintain and achieve specified targets and objectives in line with business requirements Required to produce acceptable first offs - "right first time" Train and coach fellow colleagues to suit the business requirements Positive, 'can do' attitude Takes full ownership of their area of responsibility Disciplined and self-motivated Has a strong teamwork and supportive mentality We are looking for a candidate who embodies our core values of respect, integrity, health, safety, and excellence. The successful candidate will need to demonstrate: Resilience: Ability to maintain a rational approach under pressure. Agility: Strong problem-solving skills and adaptability to changing circumstances. Teamwork: Positive working relationships with colleagues and accountability within teams. Simplification: Ability to simplify complex information and communicate effectively. Department Production - Shop Floor Contract type Permanent Hours 39 Salary Competitive Benefits CompetitiveREF-
Jun 25, 2026
Full time
Setter/ Operator Welder Fabricator- Lates Job Advert We have a vacancy within our Manufacturing Department and are currently recruiting for the role of Setter/ Operator - Welder Fabricator. We are looking for candidates who have relevant and proven experience seeking an opportunity to develop their skills and join a growing Organisation. Location: Accrofab Alcester Limited B49 6EH Shift Pattern: 39 hours per week working the Late Shift; 16.30 to 02.30 Monday to Wednesday and 16.30 to 01.30 Thursdays with designated breaks. Main duties and responsibilities: Responsibilities specific to the role. Manual TIG welding and fabrication of components to company and customer specification. Understanding of and safe use of air tools and hand tools Read and understand welding symbols as detailed on WPS and Engineering Drawings Ability to correctly set components to casting to suit customer specifications Set up machines with the required work holding and tooling in accordance with relevant procedures. Complete operations efficiently in accordance with Job Card instructions to achieve the required output levels. General responsibilities. Comply with all company Environmental, Health and Safety (EHS) requirements and report any concerns to supervision. Read and understand the requirements on the Job Card for the operation to be carried out. Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. Use of all measuring equipment as necessary to check conformance to requirements. Carry out in process inspection in accordance with requirements to ensure that components are conforming prior to passing on to subsequent operations. Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. Complete all work booking requirements within the MRP system to ensure accurate WIP records. Follow work handling and storage instructions to prevent damage to components. Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated. Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. Engage and contribute to Continuous Improvement activities to maximise efficiency. Comply with all company procedures and policies. Person Specification: 1/2 years' experience in the Aerospace Industry/ Engineering/ Manufacturing/ a similar role is desirable Must become familiar with quality & manufacturing standards and maintain and achieve specified targets and objectives in line with business requirements Required to produce acceptable first offs - "right first time" Train and coach fellow colleagues to suit the business requirements Positive, 'can do' attitude Takes full ownership of their area of responsibility Disciplined and self-motivated Has a strong teamwork and supportive mentality We are looking for a candidate who embodies our core values of respect, integrity, health, safety, and excellence. The successful candidate will need to demonstrate: Resilience: Ability to maintain a rational approach under pressure. Agility: Strong problem-solving skills and adaptability to changing circumstances. Teamwork: Positive working relationships with colleagues and accountability within teams. Simplification: Ability to simplify complex information and communicate effectively. Department Production - Shop Floor Contract type Permanent Hours 39 Salary Competitive Benefits CompetitiveREF-
My client is a globally recognized manufacturer of commercial vehicles with over 600 employees based out of their sites across the world. Following the acquisition and reinvestment into their UK based operation, they are looking to expand quickly to deliver on existing sales commitments, but also to aid the company to aggressively attract new business. Jaxdene Solutions are proud to have been exclusively engaged in supporting them with their planned growth. Based in their purpose-built North Cambridgeshire home, they are in the early stages of rebuilding their Service and Repair function, as well as establishing the New Product Assembly facility ready for use, and as a consequence they need a new Welder Fabricator to join their experienced team. Ideally you will have at least 3-5 years experience in a similar role and be qualified to at least NVQ or Apprenticeship level in Welding or Fabrication. You will have a broad background in a variety of fabrication, welding and fitting techniques, and be able to work unsupervised on a wide range of problems. Using your knowledge, you will service and repair trailers, tanks and associated systems, but also be able to fabricate parts for upgrades and retrofits where required. Knowledge of Commercial Vehicles is not essential, but strong TIG Aluminium skills are, and a weld test will be undertaken as part of the interview. What is key is your understanding that my client is looking not just for experience, but also the drive to learn new skills, contribute to a growing businesses success, and to embrace the challenges of a niche engineering market. In return, my client offers a very good hourly rate, with an opportunity for personal progression including a route in a supervisory role, and the chance to have your skills further enhanced through the Coded Welding route. If you are interested in this role, please apply below or contact Kris Feaviour at Jaxdene Solutions.
Jun 25, 2026
Full time
My client is a globally recognized manufacturer of commercial vehicles with over 600 employees based out of their sites across the world. Following the acquisition and reinvestment into their UK based operation, they are looking to expand quickly to deliver on existing sales commitments, but also to aid the company to aggressively attract new business. Jaxdene Solutions are proud to have been exclusively engaged in supporting them with their planned growth. Based in their purpose-built North Cambridgeshire home, they are in the early stages of rebuilding their Service and Repair function, as well as establishing the New Product Assembly facility ready for use, and as a consequence they need a new Welder Fabricator to join their experienced team. Ideally you will have at least 3-5 years experience in a similar role and be qualified to at least NVQ or Apprenticeship level in Welding or Fabrication. You will have a broad background in a variety of fabrication, welding and fitting techniques, and be able to work unsupervised on a wide range of problems. Using your knowledge, you will service and repair trailers, tanks and associated systems, but also be able to fabricate parts for upgrades and retrofits where required. Knowledge of Commercial Vehicles is not essential, but strong TIG Aluminium skills are, and a weld test will be undertaken as part of the interview. What is key is your understanding that my client is looking not just for experience, but also the drive to learn new skills, contribute to a growing businesses success, and to embrace the challenges of a niche engineering market. In return, my client offers a very good hourly rate, with an opportunity for personal progression including a route in a supervisory role, and the chance to have your skills further enhanced through the Coded Welding route. If you are interested in this role, please apply below or contact Kris Feaviour at Jaxdene Solutions.
We are looking for experienced Welders to join our client's team on the Pools, Tanks, and Liners project at Hinkley Point C - one of the UK's most significant infrastructure and energy developments. TIG Welder Hourly rate of £29.34 + Overtime up to £52.82 per hour 10-11-hour shift (Day and Nights) Week 1: 10 days on, 4 days off Week 2: 9 days on 5 days off Site Based at Hinkley Point, Bridgewater TIG Welder Job Description Carry out high-quality TIG welding on stainless steel components and structures to strict engineering standards. Perform welding in accordance with approved procedures, with FCAW experience considered advantageous. Interpret and work from detailed technical drawings, specifications, and welding procedures. Conduct visual and dimensional inspections to ensure weld quality and integrity. Maintain full compliance with health, safety, and environmental regulations at all times. Collaborate with supervisors and other trades to support efficient site operations and meet project deadlines. TIG Welder Essential Experience/Skills/Qualifications Proven experience in TIG welding, specifically with stainless steel. Certification and experience working to BS EN ISO 9606-1 and BTS 3.01 standards. Strong understanding of quality control and site safety practices. Ability to accurately read and interpret technical drawings. Full right to work in the UK ( BPSS clearance will be conducted for the successful candidate) TIG Welder Company Benefits Daily Expenses: £38 per day, available year-round Travel Support: Paid travel time (up to 5 hours, depending on location) Overtime Available If you feel you're a good fit for this position, please click 'apply'
Jun 25, 2026
Full time
We are looking for experienced Welders to join our client's team on the Pools, Tanks, and Liners project at Hinkley Point C - one of the UK's most significant infrastructure and energy developments. TIG Welder Hourly rate of £29.34 + Overtime up to £52.82 per hour 10-11-hour shift (Day and Nights) Week 1: 10 days on, 4 days off Week 2: 9 days on 5 days off Site Based at Hinkley Point, Bridgewater TIG Welder Job Description Carry out high-quality TIG welding on stainless steel components and structures to strict engineering standards. Perform welding in accordance with approved procedures, with FCAW experience considered advantageous. Interpret and work from detailed technical drawings, specifications, and welding procedures. Conduct visual and dimensional inspections to ensure weld quality and integrity. Maintain full compliance with health, safety, and environmental regulations at all times. Collaborate with supervisors and other trades to support efficient site operations and meet project deadlines. TIG Welder Essential Experience/Skills/Qualifications Proven experience in TIG welding, specifically with stainless steel. Certification and experience working to BS EN ISO 9606-1 and BTS 3.01 standards. Strong understanding of quality control and site safety practices. Ability to accurately read and interpret technical drawings. Full right to work in the UK ( BPSS clearance will be conducted for the successful candidate) TIG Welder Company Benefits Daily Expenses: £38 per day, available year-round Travel Support: Paid travel time (up to 5 hours, depending on location) Overtime Available If you feel you're a good fit for this position, please click 'apply'
Excellent opportunity for a Skilled Welder Fabricator to join a well-established company based in Nelson Salary: £16:00 - £18:00 Per Hour, Depending on Experience Job Type: Full Time / Permanent Location: Nelson, Lancashire BB9 About The Company They are a responsive Sheetmetal and Fabricating jobbing shop in Nelson, trading for over 25 years. Building their excellent reputation producing quality one-offs and small batch items, proud to work with companies across all sectors of engineering. They are looking to recruit multiple Skilled Welder / Fabricators to join their busy team. Candidate Requirements: You will be a skilled fabricator with 8+ years' experience In cooperation with all departments, ensure customer delivery schedules are met A competent Stainless Steel TIG Welder Able to finish work to a high standard Have proficient inspection techniques Able to assess and plan work according to timeframes and recommend process improvements Able to discuss your work with intelligence and openness Be a responsible member of the team Maintain a high standard of housekeeping on the shopfloor Ensure Health & Safety regulations are adhered to at all times Company Benefits: Excellent salary: £16 - £18 per hour The option of a 4 day, 38-hour week (Mon - Thurs 07:00 till 17:00) or 5-day week 08:00 - 16:30 Mon - Thus & 08:00 - 14:00 Friday Optional overtime available 30 Days Holiday (including bank holiday) +1 day after 5 years' service Company Pension Air -Fed mask provided, Boot Allowance & Overall Laundry Service On-site secure parking. Training and development opportunities for those who are interested and demonstrate potential If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jun 25, 2026
Full time
Excellent opportunity for a Skilled Welder Fabricator to join a well-established company based in Nelson Salary: £16:00 - £18:00 Per Hour, Depending on Experience Job Type: Full Time / Permanent Location: Nelson, Lancashire BB9 About The Company They are a responsive Sheetmetal and Fabricating jobbing shop in Nelson, trading for over 25 years. Building their excellent reputation producing quality one-offs and small batch items, proud to work with companies across all sectors of engineering. They are looking to recruit multiple Skilled Welder / Fabricators to join their busy team. Candidate Requirements: You will be a skilled fabricator with 8+ years' experience In cooperation with all departments, ensure customer delivery schedules are met A competent Stainless Steel TIG Welder Able to finish work to a high standard Have proficient inspection techniques Able to assess and plan work according to timeframes and recommend process improvements Able to discuss your work with intelligence and openness Be a responsible member of the team Maintain a high standard of housekeeping on the shopfloor Ensure Health & Safety regulations are adhered to at all times Company Benefits: Excellent salary: £16 - £18 per hour The option of a 4 day, 38-hour week (Mon - Thurs 07:00 till 17:00) or 5-day week 08:00 - 16:30 Mon - Thus & 08:00 - 14:00 Friday Optional overtime available 30 Days Holiday (including bank holiday) +1 day after 5 years' service Company Pension Air -Fed mask provided, Boot Allowance & Overall Laundry Service On-site secure parking. Training and development opportunities for those who are interested and demonstrate potential If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Pipe fitter Welder - TIG Stainless Steel Milton Keynes, MK17 8FL. 4 Month + Contract Position - Monday - Friday 7.00am - 4.30pm paid 10hrs per day. The company is a UK leading organisation specialising in major mechanical and electrical installations within the food processing industry click apply for full job details
Jun 25, 2026
Contractor
Pipe fitter Welder - TIG Stainless Steel Milton Keynes, MK17 8FL. 4 Month + Contract Position - Monday - Friday 7.00am - 4.30pm paid 10hrs per day. The company is a UK leading organisation specialising in major mechanical and electrical installations within the food processing industry click apply for full job details
Coded Welder (TIG / MIG) Location: Tyseley Pay Rate: 20.00 per hour Hours: 40 hours per week Shift Pattern: Monday to Thursday (8:00am to 4:30pm) and Friday (8:00am to 12:30pm) A well-established manufacturing company is looking for an experienced Coded Welder to join the workshop team. This is a brilliant opportunity to secure a stable role with a friendly, professional team and plenty of potential for overtime. In this role, you will be handling both TIG and MIG welding tasks, ensuring all work meets high quality standards. What We Need from You Qualifications: You should ideally hold valid welding certificates. Experience: Proven experience with both TIG and MIG welding is essential. Skills: You need to be comfortable reading and working directly from engineering drawings. Work Ethic: We are looking for someone reliable, punctual and proud of doing a good job. You should be just as comfortable working on your own initiative as you are working alongside the rest of the team. What is on Offer? A competitive pay rate of 20.00 per hour A standard 40-hour working week with an early finish on Fridays Extra overtime hours available to boost your earnings A clean, safe and welcoming workshop environment
Jun 25, 2026
Full time
Coded Welder (TIG / MIG) Location: Tyseley Pay Rate: 20.00 per hour Hours: 40 hours per week Shift Pattern: Monday to Thursday (8:00am to 4:30pm) and Friday (8:00am to 12:30pm) A well-established manufacturing company is looking for an experienced Coded Welder to join the workshop team. This is a brilliant opportunity to secure a stable role with a friendly, professional team and plenty of potential for overtime. In this role, you will be handling both TIG and MIG welding tasks, ensuring all work meets high quality standards. What We Need from You Qualifications: You should ideally hold valid welding certificates. Experience: Proven experience with both TIG and MIG welding is essential. Skills: You need to be comfortable reading and working directly from engineering drawings. Work Ethic: We are looking for someone reliable, punctual and proud of doing a good job. You should be just as comfortable working on your own initiative as you are working alongside the rest of the team. What is on Offer? A competitive pay rate of 20.00 per hour A standard 40-hour working week with an early finish on Fridays Extra overtime hours available to boost your earnings A clean, safe and welcoming workshop environment
MIG and TIG Welder/Fabricator Willand £35,000-£42,000 / £17-£19 per hour Normally 8am-5pm Monday to Friday Full Time or 4-Day Week Introduction We're looking for a skilled Workshop MIG and TIG Welder/Fabricator to join a busy fabrication shop. This is hands-on bench + jig work fabricating structural steel and aluminium components from CAD/engineering drawings. Key Duties Fabricate items from CAD drawings and engineering drawings - cutting, fitting, and assembly. MIG weld structural steel and aluminium to a high standard. Work on heavier steel fabrications and larger assemblies. Set up and use jigs/fixtures to ensure accuracy and repeatability. Interpret engineering drawings and specs - tolerances, weld symbols, BOMs. Work to drawing dimensions, keep workshop tidy, and follow H&S procedures. Requirements MIG welding experience on structural steel AND aluminium - essential. Engineering drawings - you can read and interpret without hand-holding. Experience fabricating heavier steel sections, not just light gauge. Confident using jigs/fixtures for production runs. Workshop-based, team player, flexible attitude. What We Offer Full time or 4-day working week - for better work/life balance. Flexible hours - start/finish times can be discussed but normally 8am-5pm Monday to Friday. No site work workshop based. £35,000-£42,000 / £17-£19 per hour. Interested? If you're a solid welder/fab who likes working from drawings and building proper heavy-duty kit, we'd love to hear from you. Acorn by Synergie acts as an employment agency for permanent recruitment.
Jun 25, 2026
Full time
MIG and TIG Welder/Fabricator Willand £35,000-£42,000 / £17-£19 per hour Normally 8am-5pm Monday to Friday Full Time or 4-Day Week Introduction We're looking for a skilled Workshop MIG and TIG Welder/Fabricator to join a busy fabrication shop. This is hands-on bench + jig work fabricating structural steel and aluminium components from CAD/engineering drawings. Key Duties Fabricate items from CAD drawings and engineering drawings - cutting, fitting, and assembly. MIG weld structural steel and aluminium to a high standard. Work on heavier steel fabrications and larger assemblies. Set up and use jigs/fixtures to ensure accuracy and repeatability. Interpret engineering drawings and specs - tolerances, weld symbols, BOMs. Work to drawing dimensions, keep workshop tidy, and follow H&S procedures. Requirements MIG welding experience on structural steel AND aluminium - essential. Engineering drawings - you can read and interpret without hand-holding. Experience fabricating heavier steel sections, not just light gauge. Confident using jigs/fixtures for production runs. Workshop-based, team player, flexible attitude. What We Offer Full time or 4-day working week - for better work/life balance. Flexible hours - start/finish times can be discussed but normally 8am-5pm Monday to Friday. No site work workshop based. £35,000-£42,000 / £17-£19 per hour. Interested? If you're a solid welder/fab who likes working from drawings and building proper heavy-duty kit, we'd love to hear from you. Acorn by Synergie acts as an employment agency for permanent recruitment.
Vibe Recruit are seeking a skilled Welder to join our team. The ideal candidate will be responsible for fabricating and welding various components, ensuring high-quality standards and adherence to safety protocols. This role requires a strong understanding of mechanical principles and the ability to work with a variety of materials, particularly sheet metal and experience TIG & MIG welding click apply for full job details
Jun 24, 2026
Seasonal
Vibe Recruit are seeking a skilled Welder to join our team. The ideal candidate will be responsible for fabricating and welding various components, ensuring high-quality standards and adherence to safety protocols. This role requires a strong understanding of mechanical principles and the ability to work with a variety of materials, particularly sheet metal and experience TIG & MIG welding click apply for full job details
Robertson Recruitment are currently recruiting for an experienced TIG & MIG Welder to join a well-established manufacturing business based in Nottingham. This is an excellent opportunity for a skilled welder looking for a long-term position with a company offering stable hours and an immediate start. Working hours: Monday to Friday 06:00am - 14:30pm Key Responsibilities Carrying out high-quality TIG an click apply for full job details
Jun 24, 2026
Full time
Robertson Recruitment are currently recruiting for an experienced TIG & MIG Welder to join a well-established manufacturing business based in Nottingham. This is an excellent opportunity for a skilled welder looking for a long-term position with a company offering stable hours and an immediate start. Working hours: Monday to Friday 06:00am - 14:30pm Key Responsibilities Carrying out high-quality TIG an click apply for full job details
Global Recruitment Services Ltd
Burton-on-trent, Staffordshire
Our client is a provider of engineering services to a range of industry sectors including manufacturing and rail. This includes, welding and Inspection. Due to an increase in workload they are currently looking for an experienced Welder to be based in the East Midlands although the work could be nationwide on occasions. The work will include carrying out repairs and modifications on a range of items including rail rolling stock. Applicants must be experienced Welders with the ability to carry out MIG/MAG, TIG and Manual Metal Arc (Stick) or at least a combination of the above. A current coding would also be desirable. Previous experience of working with Aluminium and Stainless Steel is useful but not essential Located in the East Midlands This is an excellent opportunity to join an extremely busy well respected organisation.
Jun 24, 2026
Full time
Our client is a provider of engineering services to a range of industry sectors including manufacturing and rail. This includes, welding and Inspection. Due to an increase in workload they are currently looking for an experienced Welder to be based in the East Midlands although the work could be nationwide on occasions. The work will include carrying out repairs and modifications on a range of items including rail rolling stock. Applicants must be experienced Welders with the ability to carry out MIG/MAG, TIG and Manual Metal Arc (Stick) or at least a combination of the above. A current coding would also be desirable. Previous experience of working with Aluminium and Stainless Steel is useful but not essential Located in the East Midlands This is an excellent opportunity to join an extremely busy well respected organisation.
TIG WELDER - LONDON - 6 months rolling - £40.54 p/hour - Umbrella INSIDE IR35 ARM is working with a leading transport company, involved with some large-scale construction in London. We are currently recruiting for a TIG welder to work on a contract basis from their depot inWest London. About You: You must have experience working with aluminium. Demonstrated expertise in TIG welding techniques on stainless steel. Ideally experienced in coded welding. Able to interpret engineering drawings. Holds a relevant qualification (e.g., City & Guilds, NVQ, etc.). What you will be doing: Interpret technical engineering drawings. Execute TIG welding on a variety of metals, ensuring precision and strength in the welds. Perform quality inspections and make adjustments as needed. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Jun 24, 2026
Contractor
TIG WELDER - LONDON - 6 months rolling - £40.54 p/hour - Umbrella INSIDE IR35 ARM is working with a leading transport company, involved with some large-scale construction in London. We are currently recruiting for a TIG welder to work on a contract basis from their depot inWest London. About You: You must have experience working with aluminium. Demonstrated expertise in TIG welding techniques on stainless steel. Ideally experienced in coded welding. Able to interpret engineering drawings. Holds a relevant qualification (e.g., City & Guilds, NVQ, etc.). What you will be doing: Interpret technical engineering drawings. Execute TIG welding on a variety of metals, ensuring precision and strength in the welds. Perform quality inspections and make adjustments as needed. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
TIG Welder / Fabricator Didcot, Oxfordshire £32,250 - £38,500 per annum (including shift allowance, dependent on experience) Permanent Full Time Benefits Include: • Twice-yearly bonus scheme • Private healthcare • 25 days holiday plus Bank Holidays • Overtime opportunities • Ongoing training and development • Opportunity to gain and maintain welding certifications • Genuine career progression opportunities click apply for full job details
Jun 24, 2026
Full time
TIG Welder / Fabricator Didcot, Oxfordshire £32,250 - £38,500 per annum (including shift allowance, dependent on experience) Permanent Full Time Benefits Include: • Twice-yearly bonus scheme • Private healthcare • 25 days holiday plus Bank Holidays • Overtime opportunities • Ongoing training and development • Opportunity to gain and maintain welding certifications • Genuine career progression opportunities click apply for full job details
The Recruitment Crowd (Yorkshire) Ltd
Stourbridge, West Midlands
We are currently hiring MIG/TIG Welders to join a leading manufacturer. You will be in a busy workshop environment and responsible for performing high-quality welds, using MIG and TIG techniques, to fabricate and assemble metal components. Hours: Monday to Thursday 7am-4pm Friday 7am-1pm Rate: £15.19 Type: Temp ongoing Location: Lye, DY9 Key Responsibilities: Execute precise MIG and TIG welding on a variety of materials, including mild and hard steel. Operate hand tools, power tools, and welding equipment efficiently Assist in the assembly of components, ensuring proper fit and finish according to engineering drawings and specifications. Responsible for the completion of a wide range of fabrications to time to meet powder coating schedules/production requirements. Welding mild and hard steel ranging from 2.5mm to 20mm. Ensuring tooling, jigs and fixtures are fit for purpose and meet production requirements to produce components to the required standard. Ensuring that housekeeping of work area is maintained. Responsibilities as listed in Quality Control Manual and procedures to BS EN ISO 9001:2000 requirements. Requirements: Reliability and good communication skills. Able to use hand tools. Experienced MIG/TIG Welder Must be confident carrying out fillet welds on various types of steel and tube. Ability to read technical drawings although training will be provided for the right candidate IT literate Ability to troubleshoot For more information, please apply with a copy of your CV today and a member of our team will be in touch!
Jun 24, 2026
Seasonal
We are currently hiring MIG/TIG Welders to join a leading manufacturer. You will be in a busy workshop environment and responsible for performing high-quality welds, using MIG and TIG techniques, to fabricate and assemble metal components. Hours: Monday to Thursday 7am-4pm Friday 7am-1pm Rate: £15.19 Type: Temp ongoing Location: Lye, DY9 Key Responsibilities: Execute precise MIG and TIG welding on a variety of materials, including mild and hard steel. Operate hand tools, power tools, and welding equipment efficiently Assist in the assembly of components, ensuring proper fit and finish according to engineering drawings and specifications. Responsible for the completion of a wide range of fabrications to time to meet powder coating schedules/production requirements. Welding mild and hard steel ranging from 2.5mm to 20mm. Ensuring tooling, jigs and fixtures are fit for purpose and meet production requirements to produce components to the required standard. Ensuring that housekeeping of work area is maintained. Responsibilities as listed in Quality Control Manual and procedures to BS EN ISO 9001:2000 requirements. Requirements: Reliability and good communication skills. Able to use hand tools. Experienced MIG/TIG Welder Must be confident carrying out fillet welds on various types of steel and tube. Ability to read technical drawings although training will be provided for the right candidate IT literate Ability to troubleshoot For more information, please apply with a copy of your CV today and a member of our team will be in touch!
Welder Fabricator Ammanford, Wales Up to £50,000 per annum (DOE) Yolk Recruitment is proud to represent a leading organisation in their search for an Welder/Fabricator to join their team. As part of an ongoing investment our client who has recently built a brand new welding workshopthis is a real opportunity for an experienced Welder/Fabricator to set up and manager their own work area. Position Overview: As a Welder/Fabricator you will be working 8:30 -4:30 and will be a crucial part of our client's operations. You will be responsible for maintaining and repairing a range of site equipment, part taking in machinery installations and moves, and working closely with the engineering team to develop production equipment. If you're a skilled Tig Welder looking for a challenging and rewarding role, this is your opportunity. This is what you'll be doing. Using TIG welding to work with stainless steel, ensuring high-quality finishes Working from technical drawings to fabricate bespoke parts and assemblies Ensuring all work meets health & safety standards and quality requirements Supporting the wider engineering team with general maintenance and repair tasks The experience you'll bring to the team. Proven experience as a Welder Fabricator, ideally in a manufacturing or industrial setting Skilled in using TIG welding for stainless steel fabrication Ability to work from engineering drawings and specifications Experience with cutting, shaping, and assembling metal components A keen eye for detail, ensuring precision and durability in all work And this is what you'll get in return. Competitive salary of up to £45,000 per annum (DOE). A supportive and collaborative working environment. Employee benefits package. On-site parking. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. Fabricating and welding components to support the maintenance and engineering teams
Jun 23, 2026
Full time
Welder Fabricator Ammanford, Wales Up to £50,000 per annum (DOE) Yolk Recruitment is proud to represent a leading organisation in their search for an Welder/Fabricator to join their team. As part of an ongoing investment our client who has recently built a brand new welding workshopthis is a real opportunity for an experienced Welder/Fabricator to set up and manager their own work area. Position Overview: As a Welder/Fabricator you will be working 8:30 -4:30 and will be a crucial part of our client's operations. You will be responsible for maintaining and repairing a range of site equipment, part taking in machinery installations and moves, and working closely with the engineering team to develop production equipment. If you're a skilled Tig Welder looking for a challenging and rewarding role, this is your opportunity. This is what you'll be doing. Using TIG welding to work with stainless steel, ensuring high-quality finishes Working from technical drawings to fabricate bespoke parts and assemblies Ensuring all work meets health & safety standards and quality requirements Supporting the wider engineering team with general maintenance and repair tasks The experience you'll bring to the team. Proven experience as a Welder Fabricator, ideally in a manufacturing or industrial setting Skilled in using TIG welding for stainless steel fabrication Ability to work from engineering drawings and specifications Experience with cutting, shaping, and assembling metal components A keen eye for detail, ensuring precision and durability in all work And this is what you'll get in return. Competitive salary of up to £45,000 per annum (DOE). A supportive and collaborative working environment. Employee benefits package. On-site parking. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. Fabricating and welding components to support the maintenance and engineering teams
HGV Technician - Fabricator Welder Description Welder/Fabricator/Coachbuilder Vacancy Monday to Friday: Day shift: 45 hours per week Permanent, Full time position I m currently working with and on behalf of my client to secure a qualified, highly skilled and motivated Welder/Fabricator/Coachbuilder for their workshop in the Walsall area. The company are a highly experienced fleet management company that have provided commercial vehicle solutions in the municipal sector for many years,. They specialise in short and long term fleet hire solutions and have workshops and depots all over UK. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first-class service. You will be carrying out fabrication to a varied and diverse fleet of vehicles The type of work you can expect to be carrying out includes (but is not limited to) Chassis repairs Vehicle servicing and Maintenance Body building and body repairs Riveting, Bolting, cutting, shaping, bending Fabricating predominantly from steel. Correction of running defects Chassis and fabrication work TIG and MIG welding Hydraulic work MOT Preparation Requirements: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent in welding and/or fabrication. Time served will also be considered, especially if the skills and experience have been obtained within the automotive industry. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away, apply with your CV. Welder/Fabricator/Coachbuilder Vacancy Permanent, Full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK.
Jun 23, 2026
Full time
HGV Technician - Fabricator Welder Description Welder/Fabricator/Coachbuilder Vacancy Monday to Friday: Day shift: 45 hours per week Permanent, Full time position I m currently working with and on behalf of my client to secure a qualified, highly skilled and motivated Welder/Fabricator/Coachbuilder for their workshop in the Walsall area. The company are a highly experienced fleet management company that have provided commercial vehicle solutions in the municipal sector for many years,. They specialise in short and long term fleet hire solutions and have workshops and depots all over UK. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first-class service. You will be carrying out fabrication to a varied and diverse fleet of vehicles The type of work you can expect to be carrying out includes (but is not limited to) Chassis repairs Vehicle servicing and Maintenance Body building and body repairs Riveting, Bolting, cutting, shaping, bending Fabricating predominantly from steel. Correction of running defects Chassis and fabrication work TIG and MIG welding Hydraulic work MOT Preparation Requirements: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent in welding and/or fabrication. Time served will also be considered, especially if the skills and experience have been obtained within the automotive industry. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away, apply with your CV. Welder/Fabricator/Coachbuilder Vacancy Permanent, Full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK.
TIG Welder 33,000 - 38,000 + Training + Early Friday Finish Monday - Thursday, Early Or Late Shift Available. 40 Hours Per Week Didcot - Commutable from Abingdon, Oxford, Wantage & Colsey Do you have TIG Welding experience within a production, engineering or marine environment? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday working pattern? Due to continued growth, my client is looking for a welder to join the team working out of their state of the art facility near Didcot. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other production & machining related tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 4697 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other production & machining work Monday - Friday, earlies The Candidate: TIG Welding Experience An interest in learning new skills A commutable distance to Didcot elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Didcot Oxford Oxfordshire Abingdon Colsey Reading Newbury Swindon MIG Welder 16.50 - 17.50 Per Hour + Training + Overtime + Early Friday Finish Monday - Thursday, 08:00 - 16:30. Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have MIG welding or fabrication experience? Are you looking for an exciting new role within a leading special purpose machinery manufacturing employer? Do you want the chance to enhance your skillset, gain industry specific training and increase your earnings through overtime? Due to continued growth, my client is looking for fabricators to join the team at their state of the art facility near Pocklington. The successful applicant will be working on a range of special purpose machinery that is sent to customers across the UK, Europe and the rest of the world. You will gain excellent product and industry training and will have the opportunity to further develop your MIG & TIG welding skills. You will be working to a range of engineering drawings and will be working with mild and stainless steel. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 4960 - (phone number removed) The Role: Mig & Tig Welding Working with mild and stainless steel Fitting a range of special purpose machinery The Candidate: MIG Welding experience Has worked with steel A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDMP
Jun 22, 2026
Full time
TIG Welder 33,000 - 38,000 + Training + Early Friday Finish Monday - Thursday, Early Or Late Shift Available. 40 Hours Per Week Didcot - Commutable from Abingdon, Oxford, Wantage & Colsey Do you have TIG Welding experience within a production, engineering or marine environment? Are you looking to gain access to further training & development to enhance your skillset? Do you want to join a leading manufacturing group offering excellent work/life balance with a Monday-Friday working pattern? Due to continued growth, my client is looking for a welder to join the team working out of their state of the art facility near Didcot. The successful applicant will be working on large, bespoke equipment to service a range of customers within the energy, healthcare and marine sectors. You will gain exposure to other production & machining related tasks enabling you to enhance your skillset and gain further experience & qualifications. This is a vital role within an expanding production team, giving you access to overtime, development and other welding techniques. This is a great time to join the business who are one of the leading companies within their sector with 2 expanding sites in the UK! With weekends off and other hours available this is a great opportunity for someone looking to increase their earnings and improve their work/life balance within a long term challenge. For more information please click apply and contact Patrick Walsh - Reference 4697 - (phone number removed) The Role: TIG & MIG Welding - Trained on MIG Access to other production & machining work Monday - Friday, earlies The Candidate: TIG Welding Experience An interest in learning new skills A commutable distance to Didcot elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. MIG TIG Welding Fabricator Fabrication Training Fitter Mechanical Production Manufacturing Manufacture Manufacturer Manufactured Engineer Engineering Didcot Oxford Oxfordshire Abingdon Colsey Reading Newbury Swindon MIG Welder 16.50 - 17.50 Per Hour + Training + Overtime + Early Friday Finish Monday - Thursday, 08:00 - 16:30. Friday, 08:00 - 15:15 Near Pocklington - Commutable From: Melbourne, Market Weighton, Seaton Ross & York Do you have MIG welding or fabrication experience? Are you looking for an exciting new role within a leading special purpose machinery manufacturing employer? Do you want the chance to enhance your skillset, gain industry specific training and increase your earnings through overtime? Due to continued growth, my client is looking for fabricators to join the team at their state of the art facility near Pocklington. The successful applicant will be working on a range of special purpose machinery that is sent to customers across the UK, Europe and the rest of the world. You will gain excellent product and industry training and will have the opportunity to further develop your MIG & TIG welding skills. You will be working to a range of engineering drawings and will be working with mild and stainless steel. This is an excellent opportunity to join an industry leading manufacturer who have been at the forefront of their industry for over 30 years! With an excellent staff retention rate and first class training on offer, this is a great time to join a business specialising in the design, build and transport of valuable special purpose machinery. For more information please click apply and contact Patrick Walsh - REF 4960 - (phone number removed) The Role: Mig & Tig Welding Working with mild and stainless steel Fitting a range of special purpose machinery The Candidate: MIG Welding experience Has worked with steel A commutable distance to Pocklington Consultant: Patrick Walsh elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Welder Fabricator Welding TIG MIG ARC STICK MMA Fitter Mechanical Technician Engineer Manufacturing Manufacturer Manufactured York Yorkshire Pocklington Melbourne Market Weighton Shipton Thorpe INDMP
An excellent opportunity for an experienced MIG Welder to join a well-established company. Job Type: Full-Time, Permanent - 45 Hours Per Week. Salary: £17.00 Per Hour. Location: Daventry, Northamptonshire NN11. Schedule: Monday to Thursday from 07:00am to 17:15pm, Fridays from 07:00am to 13:00pm. About The Company: They are a long-established, financially secure business with a proven track record of consistent growth, particularly year on year since 2019. They are looking to expand their skilled team and offer a fantastic opportunity for a MIG Welder to join them. They value stability, career growth, and the development of their staff. This is an excellent chance for someone who's ready to make a real impact in a thriving business. Job Description: As a MIG Welder, you will be working with a variety of components, primarily welding mild steel. You'll be reading and interpreting engineering drawings to complete your work efficiently and to the highest standard. Your role will involve handling materials, assembly tasks, welding, and other associated duties, ensuring compliance with all customer specifications and production deadlines. Key Duties: Set, operate, and maintain MIG welding machines and related equipment Perform MIG welding primarily on mild steel Read and interpret engineering drawings to execute welding projects Test and inspect welded surfaces to ensure they meet customer specifications Use measuring instruments (e.g., micrometers, calipers) to inspect parts Diagnose and troubleshoot welding-related issues Carry out general fabrication tasks (cutting, grinding, drilling, etc.) Ensure production deadlines are met Report any issues or faults to the Production Supervisors Maintain a safe working environment and adhere to Health & Safety legislation at all times Candidate Requirement: Essential: MUST already have the Right to work in the UK Proven MIG/TIG welding experience (particularly in mild steel) Ability to read and accurately interpret engineering drawings Experience in the manufacturing/engineering industry Strong attention to detail and the ability to work within strict timeframes Excellent manual dexterity and a good understanding of English Desirable: General fabrication knowledge (e.g., punching, bending, rolling, tacking) Additional welding experience, including TIG welding Company Benefits: Competitive hourly rate: £17.00 25 days annual leave plus 8 bank holidays Company pension scheme Company events and social gatherings Bereavement leave Referral bonus scheme Competitive overtime rates On-site secure parking Company closure over the Christmas period Why Choose Them? They are a forward-thinking company that embraces change and thrives on tackling global challenges. They promote from within and support their staff in their development and career progression. Staff retention is a key focus, and they are committed to fostering a stable and rewarding work environment. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jun 22, 2026
Full time
An excellent opportunity for an experienced MIG Welder to join a well-established company. Job Type: Full-Time, Permanent - 45 Hours Per Week. Salary: £17.00 Per Hour. Location: Daventry, Northamptonshire NN11. Schedule: Monday to Thursday from 07:00am to 17:15pm, Fridays from 07:00am to 13:00pm. About The Company: They are a long-established, financially secure business with a proven track record of consistent growth, particularly year on year since 2019. They are looking to expand their skilled team and offer a fantastic opportunity for a MIG Welder to join them. They value stability, career growth, and the development of their staff. This is an excellent chance for someone who's ready to make a real impact in a thriving business. Job Description: As a MIG Welder, you will be working with a variety of components, primarily welding mild steel. You'll be reading and interpreting engineering drawings to complete your work efficiently and to the highest standard. Your role will involve handling materials, assembly tasks, welding, and other associated duties, ensuring compliance with all customer specifications and production deadlines. Key Duties: Set, operate, and maintain MIG welding machines and related equipment Perform MIG welding primarily on mild steel Read and interpret engineering drawings to execute welding projects Test and inspect welded surfaces to ensure they meet customer specifications Use measuring instruments (e.g., micrometers, calipers) to inspect parts Diagnose and troubleshoot welding-related issues Carry out general fabrication tasks (cutting, grinding, drilling, etc.) Ensure production deadlines are met Report any issues or faults to the Production Supervisors Maintain a safe working environment and adhere to Health & Safety legislation at all times Candidate Requirement: Essential: MUST already have the Right to work in the UK Proven MIG/TIG welding experience (particularly in mild steel) Ability to read and accurately interpret engineering drawings Experience in the manufacturing/engineering industry Strong attention to detail and the ability to work within strict timeframes Excellent manual dexterity and a good understanding of English Desirable: General fabrication knowledge (e.g., punching, bending, rolling, tacking) Additional welding experience, including TIG welding Company Benefits: Competitive hourly rate: £17.00 25 days annual leave plus 8 bank holidays Company pension scheme Company events and social gatherings Bereavement leave Referral bonus scheme Competitive overtime rates On-site secure parking Company closure over the Christmas period Why Choose Them? They are a forward-thinking company that embraces change and thrives on tackling global challenges. They promote from within and support their staff in their development and career progression. Staff retention is a key focus, and they are committed to fostering a stable and rewarding work environment. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Position: Welder Fabricator Job ID: 542/25 Location: Portland Rate/Salary: £25p/hour (12 hours a day) Type: Contract HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas. The below job description will outline this position of: Marine Welder Typically, this person will be responsible for carrying out high-quality welding and fabrication work on a variety of marine vessels. This includes involvement in new build projects, refits, and maintenance, ensuring all welds meet required industry and client standards. HSB Technical s client is a very established and well-regarded business entity. Duties and responsibilities of the Marine Welder: • Carry out welding on a range of marine structures and components (MIG, TIG, MMA) • Work on new build vessels, refits, and repair/maintenance projects • Fabricate and weld pipework, plate, and structural components • Read and interpret engineering drawings and welding symbols • Ensure all welds meet quality standards and pass NDT requirements where applicable • Adhere to all health, safety, and environmental regulations on site Qualifications and requirements for the Marine Welder: • Proven welding experience within a marine or shipyard environment • Competent in multiple welding processes (MIG, TIG, MMA) • Ability to read and understand technical drawings and specifications • Relevant welding qualifications/codeds (e.g. 6G, 6GR desirable) • Strong awareness of health and safety practices This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.
Jun 21, 2026
Contractor
Position: Welder Fabricator Job ID: 542/25 Location: Portland Rate/Salary: £25p/hour (12 hours a day) Type: Contract HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas. The below job description will outline this position of: Marine Welder Typically, this person will be responsible for carrying out high-quality welding and fabrication work on a variety of marine vessels. This includes involvement in new build projects, refits, and maintenance, ensuring all welds meet required industry and client standards. HSB Technical s client is a very established and well-regarded business entity. Duties and responsibilities of the Marine Welder: • Carry out welding on a range of marine structures and components (MIG, TIG, MMA) • Work on new build vessels, refits, and repair/maintenance projects • Fabricate and weld pipework, plate, and structural components • Read and interpret engineering drawings and welding symbols • Ensure all welds meet quality standards and pass NDT requirements where applicable • Adhere to all health, safety, and environmental regulations on site Qualifications and requirements for the Marine Welder: • Proven welding experience within a marine or shipyard environment • Competent in multiple welding processes (MIG, TIG, MMA) • Ability to read and understand technical drawings and specifications • Relevant welding qualifications/codeds (e.g. 6G, 6GR desirable) • Strong awareness of health and safety practices This vacancy is being advertised by HSB Technical who have been appointed to act as the recruitment consultancy for this role.
Our client, a growing and well-established engineering business based in Portsmouth, is looking for a skilled Welder to join their expanding team. This is an excellent opportunity to become part of a company experiencing sustained growth, offering long-term career prospects and progression opportunities for the right candidate. Key Requirements: • Strong welding experience, ideally previously coded or with solid experience working with fine gauge materials • Proven experience working with Aluminium • Competent in both TIG and MIG welding • Must be based locally to Portsmouth, as the role is intended to become permanent What s on Offer: • Competitive pay starting from £21.50 PAYE • Overtime paid at time and a half, with consistent availability due to increasing business demand • Temp-to-perm opportunity providing long-term job security • Clear progression pathways within a growing engineering team • Opportunity to join a company investing in its people and future grow This role may initially be offered on an umbrella basis, with the view to transitioning into a permanent position for the right individual. Application by CV only please
Jun 21, 2026
Contractor
Our client, a growing and well-established engineering business based in Portsmouth, is looking for a skilled Welder to join their expanding team. This is an excellent opportunity to become part of a company experiencing sustained growth, offering long-term career prospects and progression opportunities for the right candidate. Key Requirements: • Strong welding experience, ideally previously coded or with solid experience working with fine gauge materials • Proven experience working with Aluminium • Competent in both TIG and MIG welding • Must be based locally to Portsmouth, as the role is intended to become permanent What s on Offer: • Competitive pay starting from £21.50 PAYE • Overtime paid at time and a half, with consistent availability due to increasing business demand • Temp-to-perm opportunity providing long-term job security • Clear progression pathways within a growing engineering team • Opportunity to join a company investing in its people and future grow This role may initially be offered on an umbrella basis, with the view to transitioning into a permanent position for the right individual. Application by CV only please
