Role: Welder Fabricator Location: Dudley Hours: Monday to Friday 6am to 2.30pm Pay Rate: £14ph to £15ph (DOE) We are recruiting an experienced Welder Fabricator to join a well-established manufacturer specialising in high-quality aluminium and alloy fabrication solutions click apply for full job details
Jun 25, 2026
Seasonal
Role: Welder Fabricator Location: Dudley Hours: Monday to Friday 6am to 2.30pm Pay Rate: £14ph to £15ph (DOE) We are recruiting an experienced Welder Fabricator to join a well-established manufacturer specialising in high-quality aluminium and alloy fabrication solutions click apply for full job details
Setter/ Operator Welder Fabricator- Lates Job Advert We have a vacancy within our Manufacturing Department and are currently recruiting for the role of Setter/ Operator - Welder Fabricator. We are looking for candidates who have relevant and proven experience seeking an opportunity to develop their skills and join a growing Organisation. Location: Accrofab Alcester Limited B49 6EH Shift Pattern: 39 hours per week working the Late Shift; 16.30 to 02.30 Monday to Wednesday and 16.30 to 01.30 Thursdays with designated breaks. Main duties and responsibilities: Responsibilities specific to the role. Manual TIG welding and fabrication of components to company and customer specification. Understanding of and safe use of air tools and hand tools Read and understand welding symbols as detailed on WPS and Engineering Drawings Ability to correctly set components to casting to suit customer specifications Set up machines with the required work holding and tooling in accordance with relevant procedures. Complete operations efficiently in accordance with Job Card instructions to achieve the required output levels. General responsibilities. Comply with all company Environmental, Health and Safety (EHS) requirements and report any concerns to supervision. Read and understand the requirements on the Job Card for the operation to be carried out. Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. Use of all measuring equipment as necessary to check conformance to requirements. Carry out in process inspection in accordance with requirements to ensure that components are conforming prior to passing on to subsequent operations. Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. Complete all work booking requirements within the MRP system to ensure accurate WIP records. Follow work handling and storage instructions to prevent damage to components. Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated. Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. Engage and contribute to Continuous Improvement activities to maximise efficiency. Comply with all company procedures and policies. Person Specification: 1/2 years' experience in the Aerospace Industry/ Engineering/ Manufacturing/ a similar role is desirable Must become familiar with quality & manufacturing standards and maintain and achieve specified targets and objectives in line with business requirements Required to produce acceptable first offs - "right first time" Train and coach fellow colleagues to suit the business requirements Positive, 'can do' attitude Takes full ownership of their area of responsibility Disciplined and self-motivated Has a strong teamwork and supportive mentality We are looking for a candidate who embodies our core values of respect, integrity, health, safety, and excellence. The successful candidate will need to demonstrate: Resilience: Ability to maintain a rational approach under pressure. Agility: Strong problem-solving skills and adaptability to changing circumstances. Teamwork: Positive working relationships with colleagues and accountability within teams. Simplification: Ability to simplify complex information and communicate effectively. Department Production - Shop Floor Contract type Permanent Hours 39 Salary Competitive Benefits CompetitiveREF-
Jun 25, 2026
Full time
Setter/ Operator Welder Fabricator- Lates Job Advert We have a vacancy within our Manufacturing Department and are currently recruiting for the role of Setter/ Operator - Welder Fabricator. We are looking for candidates who have relevant and proven experience seeking an opportunity to develop their skills and join a growing Organisation. Location: Accrofab Alcester Limited B49 6EH Shift Pattern: 39 hours per week working the Late Shift; 16.30 to 02.30 Monday to Wednesday and 16.30 to 01.30 Thursdays with designated breaks. Main duties and responsibilities: Responsibilities specific to the role. Manual TIG welding and fabrication of components to company and customer specification. Understanding of and safe use of air tools and hand tools Read and understand welding symbols as detailed on WPS and Engineering Drawings Ability to correctly set components to casting to suit customer specifications Set up machines with the required work holding and tooling in accordance with relevant procedures. Complete operations efficiently in accordance with Job Card instructions to achieve the required output levels. General responsibilities. Comply with all company Environmental, Health and Safety (EHS) requirements and report any concerns to supervision. Read and understand the requirements on the Job Card for the operation to be carried out. Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. Use of all measuring equipment as necessary to check conformance to requirements. Carry out in process inspection in accordance with requirements to ensure that components are conforming prior to passing on to subsequent operations. Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. Complete all work booking requirements within the MRP system to ensure accurate WIP records. Follow work handling and storage instructions to prevent damage to components. Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated. Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. Engage and contribute to Continuous Improvement activities to maximise efficiency. Comply with all company procedures and policies. Person Specification: 1/2 years' experience in the Aerospace Industry/ Engineering/ Manufacturing/ a similar role is desirable Must become familiar with quality & manufacturing standards and maintain and achieve specified targets and objectives in line with business requirements Required to produce acceptable first offs - "right first time" Train and coach fellow colleagues to suit the business requirements Positive, 'can do' attitude Takes full ownership of their area of responsibility Disciplined and self-motivated Has a strong teamwork and supportive mentality We are looking for a candidate who embodies our core values of respect, integrity, health, safety, and excellence. The successful candidate will need to demonstrate: Resilience: Ability to maintain a rational approach under pressure. Agility: Strong problem-solving skills and adaptability to changing circumstances. Teamwork: Positive working relationships with colleagues and accountability within teams. Simplification: Ability to simplify complex information and communicate effectively. Department Production - Shop Floor Contract type Permanent Hours 39 Salary Competitive Benefits CompetitiveREF-
My client is a globally recognized manufacturer of commercial vehicles with over 600 employees based out of their sites across the world. Following the acquisition and reinvestment into their UK based operation, they are looking to expand quickly to deliver on existing sales commitments, but also to aid the company to aggressively attract new business. Jaxdene Solutions are proud to have been exclusively engaged in supporting them with their planned growth. Based in their purpose-built North Cambridgeshire home, they are in the early stages of rebuilding their Service and Repair function, as well as establishing the New Product Assembly facility ready for use, and as a consequence they need a new Welder Fabricator to join their experienced team. Ideally you will have at least 3-5 years experience in a similar role and be qualified to at least NVQ or Apprenticeship level in Welding or Fabrication. You will have a broad background in a variety of fabrication, welding and fitting techniques, and be able to work unsupervised on a wide range of problems. Using your knowledge, you will service and repair trailers, tanks and associated systems, but also be able to fabricate parts for upgrades and retrofits where required. Knowledge of Commercial Vehicles is not essential, but strong TIG Aluminium skills are, and a weld test will be undertaken as part of the interview. What is key is your understanding that my client is looking not just for experience, but also the drive to learn new skills, contribute to a growing businesses success, and to embrace the challenges of a niche engineering market. In return, my client offers a very good hourly rate, with an opportunity for personal progression including a route in a supervisory role, and the chance to have your skills further enhanced through the Coded Welding route. If you are interested in this role, please apply below or contact Kris Feaviour at Jaxdene Solutions.
Jun 25, 2026
Full time
My client is a globally recognized manufacturer of commercial vehicles with over 600 employees based out of their sites across the world. Following the acquisition and reinvestment into their UK based operation, they are looking to expand quickly to deliver on existing sales commitments, but also to aid the company to aggressively attract new business. Jaxdene Solutions are proud to have been exclusively engaged in supporting them with their planned growth. Based in their purpose-built North Cambridgeshire home, they are in the early stages of rebuilding their Service and Repair function, as well as establishing the New Product Assembly facility ready for use, and as a consequence they need a new Welder Fabricator to join their experienced team. Ideally you will have at least 3-5 years experience in a similar role and be qualified to at least NVQ or Apprenticeship level in Welding or Fabrication. You will have a broad background in a variety of fabrication, welding and fitting techniques, and be able to work unsupervised on a wide range of problems. Using your knowledge, you will service and repair trailers, tanks and associated systems, but also be able to fabricate parts for upgrades and retrofits where required. Knowledge of Commercial Vehicles is not essential, but strong TIG Aluminium skills are, and a weld test will be undertaken as part of the interview. What is key is your understanding that my client is looking not just for experience, but also the drive to learn new skills, contribute to a growing businesses success, and to embrace the challenges of a niche engineering market. In return, my client offers a very good hourly rate, with an opportunity for personal progression including a route in a supervisory role, and the chance to have your skills further enhanced through the Coded Welding route. If you are interested in this role, please apply below or contact Kris Feaviour at Jaxdene Solutions.
Excellent opportunity for a Skilled Welder Fabricator to join a well-established company based in Nelson Salary: £16:00 - £18:00 Per Hour, Depending on Experience Job Type: Full Time / Permanent Location: Nelson, Lancashire BB9 About The Company They are a responsive Sheetmetal and Fabricating jobbing shop in Nelson, trading for over 25 years. Building their excellent reputation producing quality one-offs and small batch items, proud to work with companies across all sectors of engineering. They are looking to recruit multiple Skilled Welder / Fabricators to join their busy team. Candidate Requirements: You will be a skilled fabricator with 8+ years' experience In cooperation with all departments, ensure customer delivery schedules are met A competent Stainless Steel TIG Welder Able to finish work to a high standard Have proficient inspection techniques Able to assess and plan work according to timeframes and recommend process improvements Able to discuss your work with intelligence and openness Be a responsible member of the team Maintain a high standard of housekeeping on the shopfloor Ensure Health & Safety regulations are adhered to at all times Company Benefits: Excellent salary: £16 - £18 per hour The option of a 4 day, 38-hour week (Mon - Thurs 07:00 till 17:00) or 5-day week 08:00 - 16:30 Mon - Thus & 08:00 - 14:00 Friday Optional overtime available 30 Days Holiday (including bank holiday) +1 day after 5 years' service Company Pension Air -Fed mask provided, Boot Allowance & Overall Laundry Service On-site secure parking. Training and development opportunities for those who are interested and demonstrate potential If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jun 25, 2026
Full time
Excellent opportunity for a Skilled Welder Fabricator to join a well-established company based in Nelson Salary: £16:00 - £18:00 Per Hour, Depending on Experience Job Type: Full Time / Permanent Location: Nelson, Lancashire BB9 About The Company They are a responsive Sheetmetal and Fabricating jobbing shop in Nelson, trading for over 25 years. Building their excellent reputation producing quality one-offs and small batch items, proud to work with companies across all sectors of engineering. They are looking to recruit multiple Skilled Welder / Fabricators to join their busy team. Candidate Requirements: You will be a skilled fabricator with 8+ years' experience In cooperation with all departments, ensure customer delivery schedules are met A competent Stainless Steel TIG Welder Able to finish work to a high standard Have proficient inspection techniques Able to assess and plan work according to timeframes and recommend process improvements Able to discuss your work with intelligence and openness Be a responsible member of the team Maintain a high standard of housekeeping on the shopfloor Ensure Health & Safety regulations are adhered to at all times Company Benefits: Excellent salary: £16 - £18 per hour The option of a 4 day, 38-hour week (Mon - Thurs 07:00 till 17:00) or 5-day week 08:00 - 16:30 Mon - Thus & 08:00 - 14:00 Friday Optional overtime available 30 Days Holiday (including bank holiday) +1 day after 5 years' service Company Pension Air -Fed mask provided, Boot Allowance & Overall Laundry Service On-site secure parking. Training and development opportunities for those who are interested and demonstrate potential If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
MIG and TIG Welder/Fabricator Willand £35,000-£42,000 / £17-£19 per hour Normally 8am-5pm Monday to Friday Full Time or 4-Day Week Introduction We're looking for a skilled Workshop MIG and TIG Welder/Fabricator to join a busy fabrication shop. This is hands-on bench + jig work fabricating structural steel and aluminium components from CAD/engineering drawings. Key Duties Fabricate items from CAD drawings and engineering drawings - cutting, fitting, and assembly. MIG weld structural steel and aluminium to a high standard. Work on heavier steel fabrications and larger assemblies. Set up and use jigs/fixtures to ensure accuracy and repeatability. Interpret engineering drawings and specs - tolerances, weld symbols, BOMs. Work to drawing dimensions, keep workshop tidy, and follow H&S procedures. Requirements MIG welding experience on structural steel AND aluminium - essential. Engineering drawings - you can read and interpret without hand-holding. Experience fabricating heavier steel sections, not just light gauge. Confident using jigs/fixtures for production runs. Workshop-based, team player, flexible attitude. What We Offer Full time or 4-day working week - for better work/life balance. Flexible hours - start/finish times can be discussed but normally 8am-5pm Monday to Friday. No site work workshop based. £35,000-£42,000 / £17-£19 per hour. Interested? If you're a solid welder/fab who likes working from drawings and building proper heavy-duty kit, we'd love to hear from you. Acorn by Synergie acts as an employment agency for permanent recruitment.
Jun 25, 2026
Full time
MIG and TIG Welder/Fabricator Willand £35,000-£42,000 / £17-£19 per hour Normally 8am-5pm Monday to Friday Full Time or 4-Day Week Introduction We're looking for a skilled Workshop MIG and TIG Welder/Fabricator to join a busy fabrication shop. This is hands-on bench + jig work fabricating structural steel and aluminium components from CAD/engineering drawings. Key Duties Fabricate items from CAD drawings and engineering drawings - cutting, fitting, and assembly. MIG weld structural steel and aluminium to a high standard. Work on heavier steel fabrications and larger assemblies. Set up and use jigs/fixtures to ensure accuracy and repeatability. Interpret engineering drawings and specs - tolerances, weld symbols, BOMs. Work to drawing dimensions, keep workshop tidy, and follow H&S procedures. Requirements MIG welding experience on structural steel AND aluminium - essential. Engineering drawings - you can read and interpret without hand-holding. Experience fabricating heavier steel sections, not just light gauge. Confident using jigs/fixtures for production runs. Workshop-based, team player, flexible attitude. What We Offer Full time or 4-day working week - for better work/life balance. Flexible hours - start/finish times can be discussed but normally 8am-5pm Monday to Friday. No site work workshop based. £35,000-£42,000 / £17-£19 per hour. Interested? If you're a solid welder/fab who likes working from drawings and building proper heavy-duty kit, we'd love to hear from you. Acorn by Synergie acts as an employment agency for permanent recruitment.
Welding Instructor (Training Provided) Barnsley, South Yorkshire Are you an experienced Welder Fabricator looking for a new challenge? Perhaps you've spent years in fabrication, manufacturing, or heavy engineering and are starting to think about a role where you can use your knowledge differently click apply for full job details
Jun 25, 2026
Full time
Welding Instructor (Training Provided) Barnsley, South Yorkshire Are you an experienced Welder Fabricator looking for a new challenge? Perhaps you've spent years in fabrication, manufacturing, or heavy engineering and are starting to think about a role where you can use your knowledge differently click apply for full job details
The Recruitment Crowd (Yorkshire) Ltd
Sutton-in-ashfield, Nottinghamshire
We are currently hiring Welders for a leading manufacturer. This is a fantastic opportunity to become part of a well-established team. Hours: Monday to Thursday 08:00-16:30 Friday 07:15-13:15. OT available Monday-Friday 06:00-08:00 and Saturday 06:00-12:00 Rate: £16.07 standard, OT at £24.11 per hour Type: Temp to perm Key Responsibilities: MIG and MAG welding Use hand tools, power tools, and welding equipment safely and effectively Assist in the assembly of metal structures, ensuring precision and quality standards are met To read/interpret drawings. Use of metal cutting and grinding equipment. Clean tools, equipment, and work areas, maintaining a safe working environment. Always maintain a good working relationship with colleagues, whilst maintaining a high level of productivity. Requirements: Previous experience in MIG and MAG welding processes Confident carrying out Butt welds, plug welds and fillet welds. Ability to manage workload and meet project deadlines. Experience working in a structural welding environment and confident carrying out cylindrical welds. Please apply with a copy of your CV today and a member of the team will be in touch.
Jun 24, 2026
Seasonal
We are currently hiring Welders for a leading manufacturer. This is a fantastic opportunity to become part of a well-established team. Hours: Monday to Thursday 08:00-16:30 Friday 07:15-13:15. OT available Monday-Friday 06:00-08:00 and Saturday 06:00-12:00 Rate: £16.07 standard, OT at £24.11 per hour Type: Temp to perm Key Responsibilities: MIG and MAG welding Use hand tools, power tools, and welding equipment safely and effectively Assist in the assembly of metal structures, ensuring precision and quality standards are met To read/interpret drawings. Use of metal cutting and grinding equipment. Clean tools, equipment, and work areas, maintaining a safe working environment. Always maintain a good working relationship with colleagues, whilst maintaining a high level of productivity. Requirements: Previous experience in MIG and MAG welding processes Confident carrying out Butt welds, plug welds and fillet welds. Ability to manage workload and meet project deadlines. Experience working in a structural welding environment and confident carrying out cylindrical welds. Please apply with a copy of your CV today and a member of the team will be in touch.
Vibe Recruit are seeking a skilled Welder to join our team. The ideal candidate will be responsible for fabricating and welding various components, ensuring high-quality standards and adherence to safety protocols. This role requires a strong understanding of mechanical principles and the ability to work with a variety of materials, particularly sheet metal and experience TIG & MIG welding click apply for full job details
Jun 24, 2026
Seasonal
Vibe Recruit are seeking a skilled Welder to join our team. The ideal candidate will be responsible for fabricating and welding various components, ensuring high-quality standards and adherence to safety protocols. This role requires a strong understanding of mechanical principles and the ability to work with a variety of materials, particularly sheet metal and experience TIG & MIG welding click apply for full job details
Job Title: Fitter/Welder Location: Magherafelt Duration: Permanent Days: 7am-4pm Mon to Thurs, 7am-1pm Fri. Our engineering client, based in Magherafelt is looking for an experience Mechanical Fitter/ Welder, to join the team, on a permanent basis. Job Purpose To manufacture, assemble, fit, repair, and modify commercial vehicle bodies, trailers, and specialist coachwork equipment to company and customer specifications. The role involves welding, fabrication, mechanical fitting, and installation of components while ensuring high standards of quality, safety, and workmanship. Key Responsibilities Fabrication & Welding Carry out MIG welding to a high standard on steel, aluminium, and other materials as required. Read and interpret engineering drawings, work instructions, and technical specifications. Fabricate and assemble vehicle body components, sub-assemblies, and structures. Cut, shape, drill, and prepare materials using workshop machinery and hand tools. Perform repairs and modifications to existing coachwork and vehicle bodies. Fitting & Assembly Install vehicle bodywork, panels, flooring, doors, tail lifts, racking systems, and associated equipment. Fit mechanical, hydraulic, and pneumatic components where required. Carry out alignment, adjustment, and finishing work to ensure correct fit and operation. Assist with vehicle body refurbishment and conversion projects. General Duties Maintain workshop equipment and keep work areas clean and organised. Support continuous improvement initiatives within the workshop. Work collaboratively with colleagues across fabrication, fitting, painting, and electrical departments. Undertake any other reasonable duties as required by management. Essential Requirements Experience Previous experience as a Fitter/Welder, Fabricator/Welder, or Coachbuilder. Experience working within commercial vehicle body building, coachwork, automotive, trailer manufacturing, or related industries. Proven experience of MIG welding and fabrication. Knowledge & Skills Ability to read and interpret engineering drawings. Competent in the use of fabrication machinery and workshop tools. Strong mechanical fitting and assembly skills. Good understanding of workshop health and safety practices. Ability to work independently and as part of a team. High attention to detail and commitment to quality workmanship. Qualifications Relevant welding, fabrication, engineering, or mechanical qualification. GCSEs (or equivalent) in Maths and English preferred. Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Jun 24, 2026
Full time
Job Title: Fitter/Welder Location: Magherafelt Duration: Permanent Days: 7am-4pm Mon to Thurs, 7am-1pm Fri. Our engineering client, based in Magherafelt is looking for an experience Mechanical Fitter/ Welder, to join the team, on a permanent basis. Job Purpose To manufacture, assemble, fit, repair, and modify commercial vehicle bodies, trailers, and specialist coachwork equipment to company and customer specifications. The role involves welding, fabrication, mechanical fitting, and installation of components while ensuring high standards of quality, safety, and workmanship. Key Responsibilities Fabrication & Welding Carry out MIG welding to a high standard on steel, aluminium, and other materials as required. Read and interpret engineering drawings, work instructions, and technical specifications. Fabricate and assemble vehicle body components, sub-assemblies, and structures. Cut, shape, drill, and prepare materials using workshop machinery and hand tools. Perform repairs and modifications to existing coachwork and vehicle bodies. Fitting & Assembly Install vehicle bodywork, panels, flooring, doors, tail lifts, racking systems, and associated equipment. Fit mechanical, hydraulic, and pneumatic components where required. Carry out alignment, adjustment, and finishing work to ensure correct fit and operation. Assist with vehicle body refurbishment and conversion projects. General Duties Maintain workshop equipment and keep work areas clean and organised. Support continuous improvement initiatives within the workshop. Work collaboratively with colleagues across fabrication, fitting, painting, and electrical departments. Undertake any other reasonable duties as required by management. Essential Requirements Experience Previous experience as a Fitter/Welder, Fabricator/Welder, or Coachbuilder. Experience working within commercial vehicle body building, coachwork, automotive, trailer manufacturing, or related industries. Proven experience of MIG welding and fabrication. Knowledge & Skills Ability to read and interpret engineering drawings. Competent in the use of fabrication machinery and workshop tools. Strong mechanical fitting and assembly skills. Good understanding of workshop health and safety practices. Ability to work independently and as part of a team. High attention to detail and commitment to quality workmanship. Qualifications Relevant welding, fabrication, engineering, or mechanical qualification. GCSEs (or equivalent) in Maths and English preferred. Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Welding Quality Inspector (Off the Tools / Remote) £40,000 - £45,000 + Life Insurance + 33 Days Holiday + Private Healthcare Birmingham Are you a Welder/Welding Inspector with inspection qualifications, looking for a completely off-the-tools and remote role, within the quality department of an internationally recognised manufacturer? In this Monday to Friday role, you will be improving quality across the business within the fabrication department. This will involve writing, reviewing and approving procedures, with a bias towards externally supplied fabrications, ensuring compliance with welding, surface preparation, and coating. This manufacturing company are leaders in their specialist sector, with hundreds of employees worldwide and a turnover of £80 million. They pride themselves on their extremely low turnover of staff due to internal promotions, making this a great opportunity to propel your long-term career. This role would suit somebody who has qualifications in welding inspection, either a current Inspector or perhaps a Welder/Fabricator looking to step away from the tools and into a primarily desk-based role, looking for a long-term career within a large and profitable manufacturer. The Role: Inspection of customer supplied fabrications Reviewing welding, surface preparation, and coating Writing, reviewing and approving procedures Managing supplier non-conformances, doing root cause analysis Monday to Friday, 8am - 4pm, 37 hours a week The Person: Welder/Fabricator or Welding Inspector Welding inspection qualifications (3.1/3.2 for example) Looking for an off-the-tools, remote role Reference: BBBH25758 Engineering, Manufacturing, Engineer, Weld, Welding, Fabricate, Fabrication, Fabricator, Quality, Inspect, Inspector, Inspection, Manufacturer, Wolverhampton, Worcester, Kidderminster, Redditch If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Jun 24, 2026
Full time
Welding Quality Inspector (Off the Tools / Remote) £40,000 - £45,000 + Life Insurance + 33 Days Holiday + Private Healthcare Birmingham Are you a Welder/Welding Inspector with inspection qualifications, looking for a completely off-the-tools and remote role, within the quality department of an internationally recognised manufacturer? In this Monday to Friday role, you will be improving quality across the business within the fabrication department. This will involve writing, reviewing and approving procedures, with a bias towards externally supplied fabrications, ensuring compliance with welding, surface preparation, and coating. This manufacturing company are leaders in their specialist sector, with hundreds of employees worldwide and a turnover of £80 million. They pride themselves on their extremely low turnover of staff due to internal promotions, making this a great opportunity to propel your long-term career. This role would suit somebody who has qualifications in welding inspection, either a current Inspector or perhaps a Welder/Fabricator looking to step away from the tools and into a primarily desk-based role, looking for a long-term career within a large and profitable manufacturer. The Role: Inspection of customer supplied fabrications Reviewing welding, surface preparation, and coating Writing, reviewing and approving procedures Managing supplier non-conformances, doing root cause analysis Monday to Friday, 8am - 4pm, 37 hours a week The Person: Welder/Fabricator or Welding Inspector Welding inspection qualifications (3.1/3.2 for example) Looking for an off-the-tools, remote role Reference: BBBH25758 Engineering, Manufacturing, Engineer, Weld, Welding, Fabricate, Fabrication, Fabricator, Quality, Inspect, Inspector, Inspection, Manufacturer, Wolverhampton, Worcester, Kidderminster, Redditch If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
TIG Welder / Fabricator Didcot, Oxfordshire £32,250 - £38,500 per annum (including shift allowance, dependent on experience) Permanent Full Time Benefits Include: • Twice-yearly bonus scheme • Private healthcare • 25 days holiday plus Bank Holidays • Overtime opportunities • Ongoing training and development • Opportunity to gain and maintain welding certifications • Genuine career progression opportunities click apply for full job details
Jun 24, 2026
Full time
TIG Welder / Fabricator Didcot, Oxfordshire £32,250 - £38,500 per annum (including shift allowance, dependent on experience) Permanent Full Time Benefits Include: • Twice-yearly bonus scheme • Private healthcare • 25 days holiday plus Bank Holidays • Overtime opportunities • Ongoing training and development • Opportunity to gain and maintain welding certifications • Genuine career progression opportunities click apply for full job details
Welder Fabricator (MIG Welding) £15.08- £19.85 Per Hour Sheffield, S20 The Role Are you an experienced MIG Welder Fabricator who can read engineering drawings and fabricate quality components from start to finish? Looking for a permanent welding role where your skills are valued and your work makes a real difference? Advanced Engineering Techniques (AET) have got 4 full-time, permanent roles available working a variety of shifts pattern to suit you: MIG Welder/Fabricator Day Shift: Monday to Thursday, 7am to 4:30pm, Friday 7:00am to 11:00am Pay: £15.08 - £15.88 an hour (DOE) Twilight Shift: Monday to Thursday, 4.30pm to 2.30am Pay £16.74 - £18.58 an hour (DOE) Night Shift: Monday to Thursday, 8pm to 6am Pay £18.09 - £19.05 an hour (DOE) Weekend Shift: Friday to Sunday, 6am to 4pm (30 hrs per week) Pay £18.85 - £19.85 an hour (DOE) Location: 9-15 Holbrook Avenue, Sheffield You'll be carrying out MIG welding and fabrication work on steel, stainless steel and aluminium components. Working from engineering drawings, you'll fabricate, assemble and weld parts to a high standard, ensuring accuracy, quality and compliance with customer specifications. This is a hands-on role suited to an experienced Welder Fabricator who is confident producing work independently and takes pride in delivering quality finished products. The Company We're Advanced Engineering Techniques (AET) a Sheffield-based engineering company, and we're looking for skilled MIG Welder Fabricators to join our growing team. If you take pride in producing high-quality fabricated components and enjoy working on a variety of engineering projects, we'd like to hear from you. Why This Job Works for You Get rewarded with competitive hourly rates and regular hours Stay healthy with free Westfield Health cover and free flu jabs Keep moving thanks to free gym membership Feel secure with a company pension and life cover Enjoy time off with 31 days holiday Make your mornings easier with free on-site parking Feel supported with a friendly team and Employee Assistance Programme What You'll Need At least 3 years' experience as a MIG Welder Fabricator Strong fabrication and welding skills working with steel, stainless steel and aluminium The ability to read and interpret engineering drawings Experience using fabrication and measuring equipment The right to work in the UK. NO SPONSORSHIPS AVAILABLE. A strong focus on weld quality, accuracy and safety A reliable way to get to our Sheffield site or plans to relocate What's Next Ready to join a company that values it s employees and invests in its team? Apply now to discuss how your welding and fabrication experience could make you a great fit at AET. STRICTLY NO AGENCIES
Jun 23, 2026
Full time
Welder Fabricator (MIG Welding) £15.08- £19.85 Per Hour Sheffield, S20 The Role Are you an experienced MIG Welder Fabricator who can read engineering drawings and fabricate quality components from start to finish? Looking for a permanent welding role where your skills are valued and your work makes a real difference? Advanced Engineering Techniques (AET) have got 4 full-time, permanent roles available working a variety of shifts pattern to suit you: MIG Welder/Fabricator Day Shift: Monday to Thursday, 7am to 4:30pm, Friday 7:00am to 11:00am Pay: £15.08 - £15.88 an hour (DOE) Twilight Shift: Monday to Thursday, 4.30pm to 2.30am Pay £16.74 - £18.58 an hour (DOE) Night Shift: Monday to Thursday, 8pm to 6am Pay £18.09 - £19.05 an hour (DOE) Weekend Shift: Friday to Sunday, 6am to 4pm (30 hrs per week) Pay £18.85 - £19.85 an hour (DOE) Location: 9-15 Holbrook Avenue, Sheffield You'll be carrying out MIG welding and fabrication work on steel, stainless steel and aluminium components. Working from engineering drawings, you'll fabricate, assemble and weld parts to a high standard, ensuring accuracy, quality and compliance with customer specifications. This is a hands-on role suited to an experienced Welder Fabricator who is confident producing work independently and takes pride in delivering quality finished products. The Company We're Advanced Engineering Techniques (AET) a Sheffield-based engineering company, and we're looking for skilled MIG Welder Fabricators to join our growing team. If you take pride in producing high-quality fabricated components and enjoy working on a variety of engineering projects, we'd like to hear from you. Why This Job Works for You Get rewarded with competitive hourly rates and regular hours Stay healthy with free Westfield Health cover and free flu jabs Keep moving thanks to free gym membership Feel secure with a company pension and life cover Enjoy time off with 31 days holiday Make your mornings easier with free on-site parking Feel supported with a friendly team and Employee Assistance Programme What You'll Need At least 3 years' experience as a MIG Welder Fabricator Strong fabrication and welding skills working with steel, stainless steel and aluminium The ability to read and interpret engineering drawings Experience using fabrication and measuring equipment The right to work in the UK. NO SPONSORSHIPS AVAILABLE. A strong focus on weld quality, accuracy and safety A reliable way to get to our Sheffield site or plans to relocate What's Next Ready to join a company that values it s employees and invests in its team? Apply now to discuss how your welding and fabrication experience could make you a great fit at AET. STRICTLY NO AGENCIES
MIG Welder / Fabricator £14£16ph Brierley Hill Temp to Perm We are currently recruiting for experienced MIG welders and fabricator welders to join a busy workshop based in Brierley Hill, West Midlands . This is a temp to perm opportunity with consistent workload, weekly pay through the agency and long-term progression available click apply for full job details
Jun 23, 2026
Seasonal
MIG Welder / Fabricator £14£16ph Brierley Hill Temp to Perm We are currently recruiting for experienced MIG welders and fabricator welders to join a busy workshop based in Brierley Hill, West Midlands . This is a temp to perm opportunity with consistent workload, weekly pay through the agency and long-term progression available click apply for full job details
Welder Fabricator / Body Builder Job Type: Full-time (Permanent) Hours: Monday to Friday, 45 hours per week Pay: £39k+ per year (depending on experience) The Opportunity We re currently recruiting for an experienced Welder to join a leading vehicle manufacturing and fleet solutions provider. This is an excellent opportunity for a skilled tradesperson looking to take the next step in their career within a high-quality, innovation-driven production environment. The Role As a Welder Fabricator / Body Builder, you will play a vital role in the production team, transforming technical blueprints into high-quality vehicle bodies. You ll be working with advanced welding techniques and modern fabrication tools to ensure every vehicle meets exacting standards of quality and craftsmanship. Key Responsibilities Read and interpret technical drawings and blueprints to fabricate and assemble vehicle bodies. Carry out precision welding and fabrication using various techniques and tools. Conduct quality control inspections to ensure all work meets required standards. Collaborate with design and production teams to overcome challenges and improve processes. Maintain accurate work records and documentation for all builds and modifications. Comply with health and safety regulations, keeping a clean and safe working area. About You Proven experience as a Welder, Fabricator, or Body Builder, ideally within a production or automotive environment. Skilled in a range of welding and fabrication techniques. Ability to interpret technical drawings with excellent attention to detail. Relevant welding or fabrication certifications are desirable. A proactive, reliable team player with strong problem-solving abilities. What s on Offer Competitive salary up to £39,000 per annum Company pension scheme Free on-site parking Referral programme and company events Bereavement leave and other company benefits Ongoing training and professional development opportunities How to Apply If you have the right skills and experience for this role, please apply today with your up-to-date CV and we ll be in touch to discuss the opportunity further.
Jun 23, 2026
Full time
Welder Fabricator / Body Builder Job Type: Full-time (Permanent) Hours: Monday to Friday, 45 hours per week Pay: £39k+ per year (depending on experience) The Opportunity We re currently recruiting for an experienced Welder to join a leading vehicle manufacturing and fleet solutions provider. This is an excellent opportunity for a skilled tradesperson looking to take the next step in their career within a high-quality, innovation-driven production environment. The Role As a Welder Fabricator / Body Builder, you will play a vital role in the production team, transforming technical blueprints into high-quality vehicle bodies. You ll be working with advanced welding techniques and modern fabrication tools to ensure every vehicle meets exacting standards of quality and craftsmanship. Key Responsibilities Read and interpret technical drawings and blueprints to fabricate and assemble vehicle bodies. Carry out precision welding and fabrication using various techniques and tools. Conduct quality control inspections to ensure all work meets required standards. Collaborate with design and production teams to overcome challenges and improve processes. Maintain accurate work records and documentation for all builds and modifications. Comply with health and safety regulations, keeping a clean and safe working area. About You Proven experience as a Welder, Fabricator, or Body Builder, ideally within a production or automotive environment. Skilled in a range of welding and fabrication techniques. Ability to interpret technical drawings with excellent attention to detail. Relevant welding or fabrication certifications are desirable. A proactive, reliable team player with strong problem-solving abilities. What s on Offer Competitive salary up to £39,000 per annum Company pension scheme Free on-site parking Referral programme and company events Bereavement leave and other company benefits Ongoing training and professional development opportunities How to Apply If you have the right skills and experience for this role, please apply today with your up-to-date CV and we ll be in touch to discuss the opportunity further.
Welder Fabricator Ammanford, Wales Up to £50,000 per annum (DOE) Yolk Recruitment is proud to represent a leading organisation in their search for an Welder/Fabricator to join their team. As part of an ongoing investment our client who has recently built a brand new welding workshopthis is a real opportunity for an experienced Welder/Fabricator to set up and manager their own work area. Position Overview: As a Welder/Fabricator you will be working 8:30 -4:30 and will be a crucial part of our client's operations. You will be responsible for maintaining and repairing a range of site equipment, part taking in machinery installations and moves, and working closely with the engineering team to develop production equipment. If you're a skilled Tig Welder looking for a challenging and rewarding role, this is your opportunity. This is what you'll be doing. Using TIG welding to work with stainless steel, ensuring high-quality finishes Working from technical drawings to fabricate bespoke parts and assemblies Ensuring all work meets health & safety standards and quality requirements Supporting the wider engineering team with general maintenance and repair tasks The experience you'll bring to the team. Proven experience as a Welder Fabricator, ideally in a manufacturing or industrial setting Skilled in using TIG welding for stainless steel fabrication Ability to work from engineering drawings and specifications Experience with cutting, shaping, and assembling metal components A keen eye for detail, ensuring precision and durability in all work And this is what you'll get in return. Competitive salary of up to £45,000 per annum (DOE). A supportive and collaborative working environment. Employee benefits package. On-site parking. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. Fabricating and welding components to support the maintenance and engineering teams
Jun 23, 2026
Full time
Welder Fabricator Ammanford, Wales Up to £50,000 per annum (DOE) Yolk Recruitment is proud to represent a leading organisation in their search for an Welder/Fabricator to join their team. As part of an ongoing investment our client who has recently built a brand new welding workshopthis is a real opportunity for an experienced Welder/Fabricator to set up and manager their own work area. Position Overview: As a Welder/Fabricator you will be working 8:30 -4:30 and will be a crucial part of our client's operations. You will be responsible for maintaining and repairing a range of site equipment, part taking in machinery installations and moves, and working closely with the engineering team to develop production equipment. If you're a skilled Tig Welder looking for a challenging and rewarding role, this is your opportunity. This is what you'll be doing. Using TIG welding to work with stainless steel, ensuring high-quality finishes Working from technical drawings to fabricate bespoke parts and assemblies Ensuring all work meets health & safety standards and quality requirements Supporting the wider engineering team with general maintenance and repair tasks The experience you'll bring to the team. Proven experience as a Welder Fabricator, ideally in a manufacturing or industrial setting Skilled in using TIG welding for stainless steel fabrication Ability to work from engineering drawings and specifications Experience with cutting, shaping, and assembling metal components A keen eye for detail, ensuring precision and durability in all work And this is what you'll get in return. Competitive salary of up to £45,000 per annum (DOE). A supportive and collaborative working environment. Employee benefits package. On-site parking. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Andy Jones Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities. Fabricating and welding components to support the maintenance and engineering teams
HGV Technician - Fabricator Welder Description Welder/Fabricator/Coachbuilder Vacancy Monday to Friday: Day shift: 45 hours per week Permanent, Full time position I m currently working with and on behalf of my client to secure a qualified, highly skilled and motivated Welder/Fabricator/Coachbuilder for their workshop in the Walsall area. The company are a highly experienced fleet management company that have provided commercial vehicle solutions in the municipal sector for many years,. They specialise in short and long term fleet hire solutions and have workshops and depots all over UK. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first-class service. You will be carrying out fabrication to a varied and diverse fleet of vehicles The type of work you can expect to be carrying out includes (but is not limited to) Chassis repairs Vehicle servicing and Maintenance Body building and body repairs Riveting, Bolting, cutting, shaping, bending Fabricating predominantly from steel. Correction of running defects Chassis and fabrication work TIG and MIG welding Hydraulic work MOT Preparation Requirements: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent in welding and/or fabrication. Time served will also be considered, especially if the skills and experience have been obtained within the automotive industry. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away, apply with your CV. Welder/Fabricator/Coachbuilder Vacancy Permanent, Full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK.
Jun 23, 2026
Full time
HGV Technician - Fabricator Welder Description Welder/Fabricator/Coachbuilder Vacancy Monday to Friday: Day shift: 45 hours per week Permanent, Full time position I m currently working with and on behalf of my client to secure a qualified, highly skilled and motivated Welder/Fabricator/Coachbuilder for their workshop in the Walsall area. The company are a highly experienced fleet management company that have provided commercial vehicle solutions in the municipal sector for many years,. They specialise in short and long term fleet hire solutions and have workshops and depots all over UK. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first-class service. You will be carrying out fabrication to a varied and diverse fleet of vehicles The type of work you can expect to be carrying out includes (but is not limited to) Chassis repairs Vehicle servicing and Maintenance Body building and body repairs Riveting, Bolting, cutting, shaping, bending Fabricating predominantly from steel. Correction of running defects Chassis and fabrication work TIG and MIG welding Hydraulic work MOT Preparation Requirements: Ideally you will be fully qualified (City & Guilds), NVQ or equivalent in welding and/or fabrication. Time served will also be considered, especially if the skills and experience have been obtained within the automotive industry. So, what are you waiting for. Get in touch for further details and start that next journey on your career, we re just a click away, apply with your CV. Welder/Fabricator/Coachbuilder Vacancy Permanent, Full time position Kautec Recruitment recruit for a variety of sectors and are actively seeking to recruit HGV Technicians, HGV Fitters, Mechanics, Mobile Technicians, PSV Technicians, Engineers for our Fleet Management Clients across the UK.
Trainee Fabricator Welder Aberdeen KBM Resourcing are currently recruiting for a Trainee Fabricator Welder to join a well-established engineering company in Aberdeen. This is an excellent opportunity for someone with a bit of welding experience to develop further hands-on skills within a busy workshop environment. The Trainee will be responsible for fabricating and welding, in accordance with container specifications. Key Responsibilities Carry out MIG and MMA welding duties Assist with fabrication, fitting, and repair of steel components Operate workshop equipment including grinders, bandsaws, guillotines, cutting torches, overhead cranes, and hand tools Maintain a safe, clean, and organised work area Follow all health & safety procedures and company processes Work collaboratively within a team environment Support other workshop activities as required and participate in cross-training opportunities Candidate Requirements Positive attitude with a willingness to learn Ability to work effectively as part of a team Previous workshop or repair environment experience preferred but not essential No formal qualifications required Motivated, reliable, and adaptable approach to work On Offer An opportunity to gain further welding and fabrication skills A supportive team environment A Long-term career potential within the industry Salary, £26,436.80
Jun 23, 2026
Full time
Trainee Fabricator Welder Aberdeen KBM Resourcing are currently recruiting for a Trainee Fabricator Welder to join a well-established engineering company in Aberdeen. This is an excellent opportunity for someone with a bit of welding experience to develop further hands-on skills within a busy workshop environment. The Trainee will be responsible for fabricating and welding, in accordance with container specifications. Key Responsibilities Carry out MIG and MMA welding duties Assist with fabrication, fitting, and repair of steel components Operate workshop equipment including grinders, bandsaws, guillotines, cutting torches, overhead cranes, and hand tools Maintain a safe, clean, and organised work area Follow all health & safety procedures and company processes Work collaboratively within a team environment Support other workshop activities as required and participate in cross-training opportunities Candidate Requirements Positive attitude with a willingness to learn Ability to work effectively as part of a team Previous workshop or repair environment experience preferred but not essential No formal qualifications required Motivated, reliable, and adaptable approach to work On Offer An opportunity to gain further welding and fabrication skills A supportive team environment A Long-term career potential within the industry Salary, £26,436.80
Welder / Fabricator York 07 00 £17-19 per hour dependent on experience + Overtime Ongoing Temporary Role (Long-Term Opportunity) Join a Leading Creative Manufacturing Business in York! Were recruiting on behalf of an innovative and highly respected production company based in York and this is your chance to be part of something exciting click apply for full job details
Jun 22, 2026
Seasonal
Welder / Fabricator York 07 00 £17-19 per hour dependent on experience + Overtime Ongoing Temporary Role (Long-Term Opportunity) Join a Leading Creative Manufacturing Business in York! Were recruiting on behalf of an innovative and highly respected production company based in York and this is your chance to be part of something exciting click apply for full job details
Staff Power Group Limited
Chester Le Street, County Durham
Job Description: Welder/FabricatorJob Title: Birtley, Tyne & Wear Temporary, Full-Time Purpose of the Role To carry out high-quality welding and fabrication of ground-engaging buckets and attachments, ensuring all work meets required safety and quality standards. Key Responsibilities Perform MIG welding using 1 click apply for full job details
Jun 22, 2026
Full time
Job Description: Welder/FabricatorJob Title: Birtley, Tyne & Wear Temporary, Full-Time Purpose of the Role To carry out high-quality welding and fabrication of ground-engaging buckets and attachments, ensuring all work meets required safety and quality standards. Key Responsibilities Perform MIG welding using 1 click apply for full job details
