12 jobs found

Job Title: Electronic Technician Location: Lancashire Salary: Up to £40k (DOE) We're seeking a skilled Electronics Technician to join a growing engineering team. This is an excellent opportunity for a hands-on individual with experience in electronic assembly, testing, fault finding, and repair to support the development and manufacture of innovative electronic products. The successful candidate will work closely with engineers and production teams to build, test, troubleshoot, and maintain electronic assemblies while ensuring high standards of quality and reliability. About the Role Assemble electronic products, PCB assemblies, and electromechanical systems. Carry out soldering and rework of through-hole (THT) and surface mount (SMT/SMD) components. Perform functional testing, inspection, calibration, and verification of electronic assemblies. Diagnose and repair faults at component and board level. Interpret engineering drawings, schematics, bills of materials (BOMs), and assembly instructions. Support prototype builds, product development activities, and new product introduction projects. Maintain accurate test records, repair reports, and production documentation. Use test equipment including oscilloscopes, multimeters, signal generators, logic analysers, and other diagnostic tools. Assist with continuous improvement initiatives to enhance product quality and manufacturing efficiency. Ensure compliance with company quality standards, procedures, and health and safety requirements. About You Previous experience in an Electronics Technician, Test Technician, Production Technician, or similar role. Strong soldering and PCB assembly skills. Experience with fault finding and repair of electronic assemblies. Ability to read and interpret electrical schematics and technical documentation. Experience using electronic test and measurement equipment. Familiarity with embedded systems, microcontrollers, or firmware testing. Good attention to detail and a methodical approach to problem solving. Strong communication and teamwork skills. Ability to work effectively in a fast-paced manufacturing or engineering environment. Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.

We are working with a well-established UK-based manufacturer of industrial DC power systems, supporting critical infrastructure across sectors including utilities, transport, and energy worldwide. They are seeking a detail-oriented PCB Assembly Technician to join their Somerset site to support the assembly, inspection, and stock control of printed circuit boards. You'll work closely with production and stores teams to ensure high-quality output and efficient operations. Key Responsibilities for this PCB Assembly Technician Based in Somerset: Assemble and solder PCBs to specification (through-hole and surface mount) Inspect assemblies to ensure right-first-time quality Identify faults and carry out basic repairs Monitor and maintain stock levels Complete production and stock records accurately Follow ESD, quality, and health & safety procedures Support continuous improvement initiative Skills & Experience for this PCB Assembly Technician Based in Somerset: Experience in PCB assembly and soldering Ability to read technical drawings and schematics Strong attention to detail and manual dexterity Basic knowledge of electronic components IPC certification (desirable) About You Reliable, self-motivated, and team-oriented Keen to learn and develop Able to work efficiently to deadlines with high accuracy What We Offer Stable role within a growing, specialist manufacturer Supportive team environment Opportunity to contribute to critical engineering solutions Interested? Apply now with your CV and relevant experience to (url removed) or call on (phone number removed)

Techniche Global is supporting a leading global engineering software company based in Bristol in appointing a Graduate / Junior Application Engineer. Bristol (Hybrid) £35,000 - £42,000 + Excellent Benefits This is an excellent opportunity for someone with an electronics, electrical engineering, PCB, or manufacturing background who is looking to develop their career within a world-leading technology business. Working within the Support Services team, you'll use your understanding of PCB design and manufacturing processes to help test, validate, and improve advanced PCB design software, including next-generation AI-driven automation tools. What we're looking for: Degree, HNC, HND, or equivalent experience in Electronics or Electrical Engineering Understanding of PCB design, manufacturing, assembly, testing, or validation processes Strong analytical and problem-solving skills Good communication skills and attention to detail Interest in software, technology, and engineering innovation Suitable backgrounds include: Electronics or Electrical Engineering graduates PCB Design Engineers PCB Technicians Electronics Manufacturing or Test Engineers QA, Validation, or Product Testing professionals Candidates looking to move away from hands-on build work into a technology-focused role What's on offer? Hybrid working (up to 3 days from home) Flexible working hours Excellent training and development Modern Bristol offices Strong career progression opportunities Exposure to cutting-edge AI and PCB automation technologies If you're looking to combine your electronics knowledge with advanced engineering software and emerging AI technologies, we'd love to hear from you.

Our client, a prominent player in the Defence and Nuclear sector, is seeking a skilled Wiring/Assembly Tech for a contract role at their site in Wimborne. Due to the nature of the role, applicants must hold the sole British nationality. Fully onsite in Wimborne, Dorset. 16.71 p/h PAYE or 22.38 p/h Umbrella, inside IR35. 12 month contract. Key Responsibilities: Wiring complex assemblies using technical drawings, wiring/circuit diagrams, and work instructions Terminal installation Soldering high-density multi-pin connections Soldering surface mount devices Mechanical assembly of control cabinets, racks, frames, and associated metalwork Manufacture of cable looms Printed circuit board assembly and repair Repairs and modifications including upgrades in accordance with documented procedures Comprehensive checks on wired assemblies Ensuring all paperwork (hard and soft copy) and electronic systems including ERP is completed accurately to ensure traceability Maintaining good standards of housekeeping and cleanliness whilst complying with best health and safety practice, including ESD precautions Skills, Qualifications, and Experience: Academic qualification or practical experience in electrical assembly Previous assembly experience within a workshop manufacturing environment Excellent soldering skills including complex high-density connectors and surface mount devices Meticulous assembling skills Able to read and understand electrical drawings including wiring diagrams and PCB schematics Strong time management and ability to work unsupervised to defined deadlines Good communicator and team player Basic computer literacy, including experience with Microsoft Outlook, Word, and Excel Desired Skills: Existing qualification to IPC-A-610/620 would be an advantage Experience with COSHH Essential Functions: This role is based in the manufacturing facility and is not physically demanding, although some lifting of equipment will be required Ability to attain UKSV security clearance If you meet the above criteria and are looking for a challenging and rewarding opportunity in the Defence & Security, Nuclear, and Aerospace sectors, we encourage you to apply now. Join our client's dedicated team and contribute to critical projects.

Electronic Assembly Technician Chalgrove, Oxfordshire 13.50 per hour Full-Time Monday to Friday, 9am - 5pm Are you an experienced Cable Harness or Electronic Assembly Technician looking to join a small, friendly, and growing company where quality workmanship truly matters? Our client, a specialist manufacturer of high-precision assemblies for the medical industry, is seeking a skilled technician to join their close-knit team based in Chalgrove, Oxfordshire. The Company You'll be joining a small business of around 12 people, including a hands-on workshop team of four. The company prides itself on producing 100% defect-free assemblies that play a vital role in medical equipment used worldwide. With a focus on quality, care, and precision, you'll be part of a supportive environment where every detail counts. The Role As an Electronic Assembly Technician, you will: Assemble and inspect cable harnesses and electronic products to high standards of accuracy. Carry out precise soldering and tinning work, including joining cables and soldering components onto PCBs. Use hand crimping tools and a variety of workshop equipment to complete detailed finishing work. Follow technical drawings and assembly instructions carefully, maintaining documentation as required. Contribute to continuous improvement and uphold the company's commitment to zero-defect manufacturing. About You To succeed in this role, you'll bring: Proven experience in cable harness or electronic assembly, ideally within a high-reliability or regulated industry. Strong attention to detail and manual dexterity. Confidence in soldering and crimping to fine tolerances. A proactive, quality-focused mindset and pride in your craftsmanship. Own transport, as public transport links to the site are limited. Hours and Pay Monday to Friday, 9:00 AM to 5:00 PM (no shifts or weekends) 13.50 per hour, with opportunities for long-term development within the team If you're looking for a hands-on role where you can make a real impact in a company that values quality and precision, we'd love to hear from you. Apply today to join a trusted manufacturer making a difference in the medical technology industry. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

DUE TO COMPANY GROWTH PLANS,OUR CLIENT IS LOOKING FOR A GRADUATE ELECTRONIC HARDWARE DESIGN ENGINEER TO WORK IN A BUSY, DYNAMIC ENVIRONMENT IN OUR OFFICES IN ASH VALE, SURREY. The role will involve working within the engineering side of the business which will include design and development work, product testing and manufacturing support activities. You will be working closely with a team of senior engineer and engineering technicians. Although the ability to self-manage is important, the senior engineers will support and mentor a successful candidate to allow them to grow and develop into the role. Beneficial Technical Skills Knowledge of, or willingness to learn, skills to be able to write test plans against formal product requirements to allow product compliance to be demonstrated. Mechanical assembly skills to be able to assist in the build and development of prototype products and test samples/bespoke test equipment. Understanding of, or willingness to learn, electromagnetic compatibility (EMC) design principles with the ability to consider EMC during system and sub-assembly design. A basic awareness of RF engineering may be of benefit in this respect although is not expected. Attributes needed Ability to adopt existing design processes/systems and provide input into developing existing processes. Ability to work independently, managing own time relative to the project time frames, as part of a dynamic and flexible multi-disciplinary team working of a variety of projects at any one time. Be adaptable to work both in a structured, pre-planned, work environment yet be able to effectively switch to reactive tasks, such as production support and failure investigations, when required. A successful candidate will be keen to progress and build a successful career from the role. Core Technical Requirements: Relevant 2:1 or higher degree in Electronic Engineering (or equivalent qualification). Relevant industry experience either following qualification or as a placement year during education. Practical electronics skills, including fine-pitch surface mount soldering and knowledge of general test equipment applications and use. Demonstrate an understanding of measurement and data acquisition techniques, to enable the candidate to select and apply appropriate test methods and equipment set ups to perform the required testing activities. Experience in prototyping, debugging and functional test of electronic systems. Ability to work from preprepared test specification and method to perform black box product testing as part of system qualification. Able to clear interpret and present test data to show compliance against a test plan. Demonstrate and understanding of analogue and digital components and circuit design theory knowledge to understand electronic assemblies at component level. Ability to work from preprepared test specification and method to perform PCB component level testing of sub-assemblies as part of formal product qualification Experience working with product specification and product standards such as EN, IEC, BS, Def-Stan and MIL-STD.

Surface Mount Technician- Waterlooville Are you skilled in operating and maintaining SMT equipment? Are you adept at working with fine pitch components? Our client, an organisation specialising in electronics manufacturing, is seeking a Surface Mount Technician to join their team. This is a temporary-to-permanent role with negotiable salary, offering an exciting opportunity for the right candidate. Main Responsibilities: Operate and maintain SMT Pick & Place machines, ensuring adherence to strict health and safety guidelines. Use screen-printing machines for efficient operations. Programme and set up P&P machines for optimal performance. Programme and maintain reflow ovens. Perform PCB assembly, including SMT and PTH soldering. Carry out cable assembly using crimp tools. Engage in electromechanical assembly. Work from customer BOM's and drawings to ensure manufacturing meets required standards. Conduct PCBA rework as needed. Experience / Skills / Qualifications: Essential ability to operate Pick & Place machines. Off-line programming experience with P&P machines (Juki etc.). Strong problem-solving and diagnostic skills. Excellent component recognition and knowledge. Ability to thrive in a high-pressure environment. The working hours for this role are Monday to Friday, from 08:00 to 16:00. Our client values its employees and provides a collaborative and supportive work environment. They offer competitive compensation that is commensurate with experience. If you believe you have the necessary skills and enthusiasm to excel in this role, we would love to hear from you. Join our client's team as a Surface Mount Technician and take the next step in your career. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Electronics/Electro-Mechancial Technician Sunbury-Upon-Thames Proactive Global is hiring for experienced Electromechanical/Electronic Technicians having hands-on work experience with Mechanical and Electronic Components for a leading manufacturing organisation in Sunbury-on-Thames. This is a Permanent Position Shift Timings : Mon-Friday 8:00AM - 4:30PM Salary - 28k- 32k per annum Responsibilities: All assembly operations including electronic assembly, PCB soldering, wiring etc. In-process inspection & test. Sealing & finishing operations. Calibration operations. Champion 5S & Standard Work to maintain and improve product quality and factory productivity. Support internal Management System audits (ISO 9001 / 14001). Support continuous improvement in product quality and factory productivity. Support proto-type build & special projects. Support New Product Introduction. Any reasonable task in Manufacturing, including Store & Logistics, PCBA and Main Production. Support automated printed circuit board assembly. Support materials handling & storage, including cycle counting. Interested candidates can share their CV at (url removed) or contact Gaurvi at (0) (phone number removed) for further discussion on the role. Alternatively, apply directly to this Advert! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Electronics Production Technician Permanent role Based in Guildford, Surrey Offering up to 35,000 Do you have experience programming and testing PCBs? Do you have experience in electronic assembly? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electronics Production Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Program and test PCBs and systems Complete assembly and test documentation Support electronic assembly including box build and cable harnesses Collaborate with development engineers delivering on technical tasks Work in an ESD (Electronic Static Discharge) safe environment Checking in/out goods Your skillset may include: HND, HNC or OND in Electronics/Engineering; Experience in programming and testing electronic systems Able to work independently Punctual and good time management Familiarity with Microsoft Office (Outlook, Excel, Word) If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electronics Production Technician Permanent role Based in Guildford, Surrey Offering up to 35,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

Production Technician Location: Newport Isle of Wight Salary: 13.84 Hours: Monday to Friday Pertemps Recruitment is seeking a Production Technician to join a leading manufacturing organisation. This role involves assembling, testing, and calibrating electronic and mechanical components to high-quality standards, while supporting continuous improvement across the production team. The role is initially for 6 months with a possibility of extension. Key Responsibilities: Assemble and test electronic, electrical, and mechanical components. Program and calibrate PCBs and subassemblies. Inspect finished products against defined criteria. Troubleshoot and repair faults during manufacture. Complete production and quality documentation. Support process improvements and maintain a safe, clean working environment. Skills & Experience Required: Ability to read and follow technical drawings, schematics, and instructions. Good hand-eye coordination and attention to detail. Previous experience in production or electronic assembly. Strong mechanical aptitude and troubleshooting skills. Good communication and teamwork abilities. IPC-610, IPC-620, JSTD-001 certifications desirable but not essential. This is an excellent opportunity for someone with a background in electronics, assembly, or production environments who is looking to grow their skills within a supportive team. Please apply via this Job advert or email (url removed) with a CV or any questions.

Introduction: Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role is part of our Saab Seaeye Business Unit. In this role, you will gain an in-depth knowledge and understanding of our product range and have the opportunity to manufacture a range of ROV assemblies from component level through to final testing and sign off. Additionally, you will gain an understanding of real world performance and use fault-finding methods to perform route cause analysis on returned products that require servicing or refurbishment. Key Responsibilities: You will be responsible and accountable for the manufacture and repair of electro-mechanical assemblies. Have the ability to read and interpret engineering drawings and schematics to assist with building and fault finding across the product range. To ensure soldering and electrical looming is carried out to a high standard. To assist with pressure and soak testing of all Saab Seaeye components when required, in a timely fashion. To maintain personal ability in, and appropriate use of, all relevant IT (Information & Technology) and other systems required to adequately perform the role Previous experience working on complex medium to large Electro-mechanical and Hydraulic assemblies, down to a component level. Be familiar with 6S principles and lean working initiatives. To maintain a professional and supportive relationship with team members and other departments in order to deliver business and delivery objectives or deadlines. To act ethically, with integrity and in the best interest of the business at all times. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. To keep good time management to minimise any wasted time and maximise productivity and effectiveness. To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role. To carry out any other duties as detailed by your Supervisor or Manager from time to time. Required Skills: Ability to interpret electro/mechanical/hydraulic schematics. Proven knowledge and experience of mechanical engineering practices. Should have an understanding of electronic manufacturing practices, such as IPC or equivalent. Have the ability to use proven fault finding methods to diagnose electrical and electronic faults to PCB board level. Desirable Skills: Component level diagnostics would be advantageous A formal qualification in mechanical/electrical engineering - NVQ level 3 or equivalent. Previous use of electronic testing equipment such as oscilloscopes/megger/multi meters. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Job title: Electronics Technician - IR35 EXEMPT CONTRACT AND PERMANENT POSITIONS AVAILABLE Location: Portsmouth Salary: Up to £30,000 per annum/£16 paye or £21 ltd or umbrella Working Hours: 7:30am - 4:00pm Monday to Thursday (early finish on a Friday) Are you a detail-oriented individual with a passion for electronics? We are looking for a skilled Electronics Technician to join our growing manufacturing team in Portsmouth. Reporting to the Manufacturing Supervisor, you will play a vital role in the assembly and preparation of high-quality PCBs. The Benefits of the Electronics Technician Role: Every last Friday of the month off in addition to standard holiday allowance 20 days holiday plus bank holidays 3 days Christmas shutdown (not taken from your holiday allowance) Extensive training provided, including IPC-610 certification Opportunity to gain ESA certification in the future Key Responsibilities for this Electronics Technician : Manufacture PCB assemblies Prepare kits and materials for production Perform wiring modifications and cable/harness assemblies Complete mechanical assembly tasks Skills & Experience: Strong component recognition Excellent understanding of ESD procedures Ability to read and interpret CAD drawings and wiring diagrams High attention to detail Comfortable working under pressure with shifting priorities Self-motivated and capable of working independently Excellent organisational skills If you're ready to take the next step in your career as an Electronics Technician with a company that values precision, training, and work-life balance, we d love to hear from you! Apply now and become a key part of our dedicated and supportive team as an Electronics Technician . INDMAN Due to the volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful. Check our website for more opportunities.