1215 jobs found

MERITUS are recruiting for a Systems Engineer to support communications systems and EMC projects in the Defence and Space industry. Ideally, we are looking for someone with Military ground site installations and communications systems experience. SYSTEMS ENGINEER - EMC - INSIDE IR35 - £70 PER HOUR - PORTSMOUTH - SC CLEARED (MUST HAVE ON APPLICATION) - 6 months (+VERY LIKELY EXTENSION) - SINGLE STAGE INTERVIEW PROCESS - SECTOR: SPACE MERITUS are recruiting for an EMC & TEMPEST Systems Engineer to support a leading defence communications programme focused on secure ground-based infrastructure. This role will focus on the design, analysis, verification, and certification of communications and control system installations operating within highly regulated defence environments. You will be responsible for ensuring installations comply with EMC and TEMPEST requirements, supporting critical communications capabilities used within secure operational environments. The role would suit candidates with experience in EMC engineering, TEMPEST compliance, electrical installation design, systems integration, military communications, or secure infrastructure projects. Key Responsibilities Develop compliant installation designs for communications, networking, and control systems. Capture, analyse, and validate EMC and TEMPEST requirements. Support system architecture development and installation design activities. Produce EMC and TEMPEST compliance documentation, analysis, and technical reports. Develop verification, validation, and acceptance test plans. Coordinate with specialist test facilities and certification authorities. Conduct engineering analysis, trade studies, and impact assessments. Manage system interfaces and support integration activities. Support equipment selection, installation, testing, and operational acceptance. Work closely with customers, suppliers, and multidisciplinary engineering teams throughout the system life cycle. Essential Skills & Experience Experience supporting EMC-compliant electrical or electronic system installations. Strong understanding of electromagnetic interference (EMI), electromagnetic compatibility (EMC), and mitigation techniques. Practical experience of electrical equipment installation, including rack integration, cabling practices, grounding, and bonding. Experience developing test plans, compliance evidence, and engineering documentation. Knowledge of systems engineering principles across requirements, design, integration, verification, and validation. Strong communication and stakeholder management skills. Desirable Skills & Experience Knowledge of TEMPEST standards, testing, or secure communications environments. Experience working with EMC standards, test specifications, and compliance activities. Military communications, satellite communications, or secure network infrastructure experience. Experience with military ground installations and associated standards. Previous involvement in regulated defence or security-sensitive programmes. Experience engaging with EMC test houses, certification authorities, or defence customers.

Electrical/Electronics Engineer - R&D North Yorkshire | Hybrid Working (4 Days On-Site) Are you an innovative Electrical/Electronics Engineer looking to play a key role in developing cutting-edge products within a forward-thinking R&D environment? We're recruiting on behalf of a well-established North Yorkshire-based engineering company seeking a talented individual to join their Research & Development team. The role has a bias towards Electrical design. This is a hybrid position requiring four days per week on-site, offering the opportunity to work hands-on with advanced technology while contributing to exciting new product development in an ISO9001-accredited environment. The Role As an Electronics Engineer within the R&D department, you will: Lead and contribute to the design and development of new Electrical/Electronic products Provide electrical design expertise across multiple concurrent projects Develop and specify electric motors and associated systems Ensure compliance with ISO9001 standards and documentation processes Complete, review, and maintain detailed design documentation Support inspection, testing, and certification activities Key Responsibilities & Technical Expertise We're looking for strong experience across the following areas: Electrical & Power Systems Electric motor types, design, and specification Power distribution and protection equipment Variable speed drives and soft-start systems Wiring distribution systems Working with anything up to 4,500 volts, AC/DC as well as low voltages Test Specifications Electronics & Circuit Design PCB manufacturing standards and prototyping PCB breadboarding using soldering irons and hand tools PCB design using Altium (or equivalent CAD tools) Inspection, testing, and certification requirements Communication & Control Systems Communication protocols (RS232, RS485, SPI, I²C, Ethernet) Industrial sensors and equipment What's on Offer Hybrid working model (4 days on-site, 1 remote) Opportunity to work on innovative, technically challenging products Collaborative R&D environment Long-term career progression within a stable organisation Competitive salary and benefits package If you're passionate about designing high-performance electronic systems and want to be part of a company that values innovation, quality, and engineering excellence - we'd love to hear from you. Apply today to take your next step in advanced electronics engineering. WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.

Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Electrical Design Engineer - Building Services Greater Manchester, Northwest Up to £45,000 + Benefits The Opportunity Hays are representing a well established and growing M&E Building Services Contractor with an excellent reputation for delivering high-quality commercial and retail projects valued up to £5 million. Due to continued growth and a strong pipeline of secured work, they are now seeking an Intermedaite Electrical Design Engineer to join their expanding team.This is a fantastic opportunity for an engineer with 2-5 years' experience who's looking to step into a role with real responsibility, exposure to multiple projects, and a clear progression path toward senior or leadership positions. The Role As an Electrical Design Engineer, you'll support the delivery of electrical design across a range of commercial projects, working closely with senior engineers and wider project teams.You'll play a key role in coordinating design activities, supporting technical delivery, and ensuring projects meet deadlines and quality standards. Key Responsibilities Support planning and coordination of electrical design across multiple projects Liaise with internal teams, clients, and external stakeholders Assist in producing electrical layouts, schematics, and technical documentation Maintain accurate design records and documentation Attend design meetings and follow up on actions Ensure clear communication across all stakeholders About You A degree or HND in Electrical Engineering (or equivalent) 2-5 years' experience in an electrical design / building services environment (essential) Experience using Electrical OM or similar software Knowledge of BS7671 / IET Wiring Regulations Exposure to AutoCAD, Revit or similar tools (desirable) Strong organisational and communication skills What's in it for you? Competitive salary up to £45,000 (depending on experience) 25 days holiday plus Bank Holidays Pension scheme 5% Flexible and hybrid working arrangements Supportive and collaborative working environment Opportunity to work on diverse and exciting projects across the UK If you are an Electrical Design Engineer looking for your next challenge within a forward-thinking and growing organisation, I would love to hear from you.Apply today with your updated CV to discuss this opportunity in confidence or call Shane on . Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow / Filton - Hybrid (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. Core duties: You'll be acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers You'll manage the electrical interface with the electrical power system ensuring that a best for programme approach is adopted You'll have technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration You'll support the technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities You'll undertake technical risk analysis and develop risk mitigation plans in support of equipment delivery into the SSNA platform Essential Skills: Degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) with CEng or working towards Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) The SSNA Steam Integrated Delivery Team (SIDT): The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow / Filton - Hybrid (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. Core duties: You'll be acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers You'll manage the electrical interface with the electrical power system ensuring that a best for programme approach is adopted You'll have technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration You'll support the technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities You'll undertake technical risk analysis and develop risk mitigation plans in support of equipment delivery into the SSNA platform Essential Skills: Degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) with CEng or working towards Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) The SSNA Steam Integrated Delivery Team (SIDT): The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Hardware/Electronics Design Engineer Newcastle upon Tyne Excellent Career Progression | Innovative Engineering Environment | Multiple Levels Considered Are you a Hardware or Electronics Design Engineer looking to work on cutting-edge power electronics technology while developing your career with a growing and innovative engineering business? Our client is a highly respected engineering organisation with an excellent reputation for developing advanced power electronic solutions across a range of demanding applications. Due to continued growth and new project wins, they are looking to strengthen their engineering team with the addition of a Hardware/Electronics Design Engineer. This is an excellent opportunity to join a collaborative and technically challenging environment where you'll work on the full product development life cycle, from concept and feasibility through to testing, validation and production support. Importantly, our client is open to engineers from a variety of backgrounds and experience levels. If you have relevant power electronics experience but don't tick every box listed below, we would still encourage you to apply. The Role As a Hardware/Electronics Design Engineer, you will be involved in the design, development and validation of power electronic products and systems, working alongside a talented multidisciplinary engineering team. Key Responsibilities Analyse and understand customer and regulatory requirements. Carry out feasibility studies to identify the most suitable circuit topologies and technical solutions. Design, develop and debug power electronic circuits, components and PCB assemblies for both new product development and existing product support. Produce engineering documentation including schematics, bills of materials (BOMs), wiring diagrams, design calculations and simulation reports. Design, set up and execute testing activities to ensure products meet performance and compliance requirements. Develop and implement new design techniques, circuits and test methodologies. Maintain accurate engineering records, design documentation and technical reports. Apply modern engineering tools and techniques to improve cost, reliability, durability, manufacturability and development times. Collaborate closely with other engineers and project teams to deliver successful project outcomes. About You We are interested in speaking with engineers who have a passion for electronics design and power conversion technologies. You will ideally possess: Degree qualification in Electronics Engineering, Electrical Engineering or a related discipline. Experience in power electronics design, motor drives, static power conversion or similar applications. Experience designing power circuitry operating in either: Low voltage/high current applications (12V, 24V, 48V and 200A-1500A), and/or High voltage/high current applications (300V-1000V and 200A-800A). Knowledge of different power semiconductor technologies and the ability to select the most appropriate solution for a given application. Experience with gate drive circuits and associated technologies. Experience designing low-voltage control and signal conditioning circuits, including microprocessors, PWM generation and interface circuitry. Strong understanding of circuit analysis, simulation techniques and design of experiments. Excellent problem-solving and analytical skills. Why Apply? Excellent career progression opportunities. Exposure to innovative power electronics and advanced engineering projects. Opportunity to work across the full product development life cycle. Supportive and collaborative engineering culture. Work alongside highly experienced engineers and technical specialists. Ongoing professional development and training opportunities. Our client recognises that great engineers come from a variety of backgrounds. If you have experience in power electronics, motor drives, power conversion, automotive electrification, industrial electronics or a similar field, we'd be keen to hear from you-even if your experience doesn't match every requirement listed above. For a confidential discussion and further information, please get in touch WA Consultants is an Employment Business and an Employment Agency as described within The Conduct of Employment Agencies and Employment Businesses Regulations 2003.

Electrical Design Engineer - Vehicle Location: Warwick - On-site | Permanent | £40,000-£50,000 DOE VIQU are partnering with a leading UK vehicle manufacturer to recruit an Electrical Design Engineer to join their growing Electrical team. This is an exciting opportunity for an experienced electrical engineer with hands-on experience in 2D harness design and vehicle electrical systems, looking to work on innovative heavy vehicle projects. You'll take electrical designs from concept through to production, designing harnesses, selecting components, and working closely with 3D Design engineers and the Systems team. You'll liaise with suppliers and customers, support testing activities, and contribute to design documentation and engineering change control. Key Responsibilities: Design 2D harnesses and select electrical components for heavy trucks. Collaborate with 3D Design engineers and the Systems team to deliver production-ready designs. Compile BOMs, design release documentation, and support engineering change control. Contribute to product testing, analyze results, and resolve technical issues. Liaise with internal and external stakeholders to secure approvals. Support problem-solving and provide technical guidance where required. Key Requirements: Proven experience in electrical engineering within truck, yellow goods, or similar industries. Strong expertise in 2D harness design and electrical distribution systems. Knowledge of ISO standards and EDS design principles. Experience liaising with suppliers and managing engineering documentation. Excellent problem-solving skills, attention to detail, and clear communication. Degree in Electrical or Software Engineering, or equivalent experience. Membership of a recognized engineering institution (eg, IET) is a plus. Desirable: 3D harness routing, schematic design, Zuken E3 or similar software, DFMEA participation, V-model validation, ISO26262, HGV systems, or supervisory experience. Apply in confidence with Phoebe Rees at VIQU IT (see below) Know someone great? Earn up to £1,000 if your referral is successful (terms apply).

Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

World Class Defence Organisation based in Bolton is currently looking to recruit a Manufacturing Engineer. The department are looking for candidates with skills in the following: Verification & validation, design modifications, commissioning, FMEAs, configuration control, sub-assembly manufacturing. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at 'time and a quarter' Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non Conformance Process using SAP. Skills / Experience: Verification & validation Design modifications COMMISSIONING FMEA's Configuration control Sub-assembly manufacturing Industrial Validation through the use of FMEA's, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications, Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements, and respond to them. Qualifications Required: Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Not required if a L3 apprenticeship standard has been achieved ORDegree in a relevant Engineering subject.

Are you looking for new challenges and personal growth within Coca-Cola Europacific Partners? Then we have a great opportunity for you! Do you have a personality with the power to influence and connect? Can you sustain the pace to keep on growing? Will you make an impact with your desire to win? What you become part of: Edmonton Operations produce 50 million cases of drinks per year across their 7 manufacturing lines. The site can produce up to 142,000 litres of drink per hour consisting of Bag in Box, PET and Glass bottling. They are the only site in GB to produce our Oasis Drinks and Bag in Box. There are over 300 people across Manufacturing, QESH and Engineering and Distribution, experience here can lead to excellent career opportunities both in Edmonton and further afield across other GB sites and Pan-European locations. Job Purpose Establish and implement the Asset Care strategy following CCEP guidelines for technical plans, OEM's (Original Equipment Manufacturer) support, budget to ensure the team safely maintains all the Distribution/ASRS equipment and machinery to achieve output that is within operational performance, costs, quality and CRS targets. Key Responsibilities Act as a Safety role model and ensure all QESH standards, both legal and CCEP defined, are fulfilled for the Distribution/ASRS area Set up annual M&R (Maintenance & Repair) budget for the Distribution/ASRS area and manage it to assure the right allocation across the different Areas depending on individual needs and prioritization criteria Sign-off preventive and predictive plans for the Distribution/ASRS area and support the ASRS Technicians in its implementation Develop and/or continuously update (through the use of Continuous Improvement tools) the preventive and predictive maintenance plans for the ASRS/Distribution area. Take the lead of all annual overhauls and modular maintenance activities. Manage relationship with OEM's (Original Equipment Manufacturer) and asset care suppliers to avoid multiple and uncontrolled contacts/communication Accomplish all legal maintenance and with the support of the Technical Trainers, training activities for the Team on time and in a cost efficient manner Support the Engineering function on the development of investment projects, new initiatives or Utilities & Facilities activities Lead, develop and coach the ASRS Technicians to ensure they maximise their individual and team performance Control the spare parts warehouse management in an efficient way (high rotation, right safety stocks, handle write-offs, etc Support ASRS and Automation Technicians with the issues they may have, establishing a clear escalation process as required. Experience preferred Maintenance Lead roles within food processing/FMCG environments with volatile demand and complex KBI business - specific project engineer/asset care Design of Asset care strategies Delivering performance improvement/equipment availability and utilisation in a highly automated and sophisticated engineering environments benchmarked as World Class Mechanical/Electrical/Engineering Degree or Equivalent Level 6 qualification. The closing date for applications is 02/04/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.

Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Our award winning Client is a national independently owned building services consultancy delivering high-quality mechanical, electrical and public health (MEP) design solutions across sectors including commercial, residential, healthcare, education and mixed-use developments. The Leeds office plays a key role in delivering technically robust and innovative engineering solutions for projects across the UK. Role Overview The company is looking to hire an experienced BIM Manager to lead and develop BIM strategies across the Leeds office. This is a senior leadership role responsible for overseeing BIM standards, digital workflows, information management, and coordination processes across all projects. The successful candidate will drive best practice in accordance with ISO 19650, support project teams in achieving high-quality digital outputs, and contribute to the wider digital strategy of the business. Key Responsibilities: Strategic & Leadership Lead BIM strategy and digital delivery within the Leeds office. Develop, implement, and maintain office BIM standards and protocols. Ensure compliance with ISO 19650 and project-specific BIM Execution Plans (BEPs). Act as the primary BIM lead for clients and external consultants. Contribute to company-wide digital strategy and innovation initiatives. Project Delivery Oversee BIM implementation across multiple MEP projects. Provide technical guidance on model setup, coordination, and information management. Review federated models and ensure coordination standards are met. Support clash detection processes and multidisciplinary collaboration. Monitor model quality, data integrity, and compliance with company standards. Technical & Systems Management Manage and maintain BIM templates, libraries, and shared parameters. Oversee Common Data Environment (CDE) platforms such as Autodesk Construction Cloud / BIM 360 or Viewpoint. Support development of automation tools (e.g. Dynamo) where appropriate. Drive efficiency improvements through digital workflows and standardisation. Team Development Mentor and develop BIM Coordinators and Technicians. Deliver internal BIM training and upskilling initiatives. Support recruitment and onboarding of digital delivery staff. Promote a culture of collaboration and continuous improvement. Key Requirements: Essential Significant experience in a BIM Manager or Senior BIM leadership role within a building services consultancy. Advanced proficiency in Revit MEP, Navisworks and AutoCAD. Strong working knowledge of ISO 19650, UK BIM Framework and Information management processes. Experience managing CDE platforms. Proven ability to implement and manage BIM standards across multiple projects. Strong leadership, communication, and stakeholder management skills. Understanding of UK building regulations and MEP coordination requirements. Desirable: Experience working across healthcare, commercial, or large-scale residential sectors. Knowledge of 4D/5D BIM processes. Experience with Dynamo or other automation tools. Degree in Building Services Engineering, Digital Construction, or related discipline.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow / Filton - Hybrid (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. Core duties: You'll be acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers You'll manage the electrical interface with the electrical power system ensuring that a best for programme approach is adopted You'll have technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration You'll support the technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities You'll undertake technical risk analysis and develop risk mitigation plans in support of equipment delivery into the SSNA platform Essential Skills: Degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) with CEng or working towards Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) The SSNA Steam Integrated Delivery Team (SIDT): The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Consultant Engineer - Electrical Engineering Location: Barrow / Filton - Hybrid (Dependent on business needs) We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £56,000+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. Core duties: You'll be acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers You'll manage the electrical interface with the electrical power system ensuring that a best for programme approach is adopted You'll have technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration You'll support the technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities You'll undertake technical risk analysis and develop risk mitigation plans in support of equipment delivery into the SSNA platform Essential Skills: Degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) with CEng or working towards Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) The SSNA Steam Integrated Delivery Team (SIDT): The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge! We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title : Mechanical Design Engineer Location : Cambridge (Hybrid Working - 3 Days On-Site Per Week) Salary : £40,000 - £50,000 + Bonus & Benefits (Depending on Experience) Please Note : All Applicants must have the right to work in the UK without the need for VISA sponsorship now or in the future. Role Overview: Zenovo are looking for a Mechanical Design Engineer to join their client in Cambridge who design and manufacture globally recognised consumer products.An ideal candidate will have at least 3-Years of Commercial Experience in a Product Development Environment, having been involved in taking Products through from Concept to Manufacturing. Job Responsibilities: Work with the wider engineering team (Electronics & Software) to develop and test new product concepts. Create product designs, feasibility studies, and prototypes, improving them through testing and feedback. Design reliable, manufacturable products that meet performance and compliance requirements. Use 3D CAD, engineering drawings, and prototyping to develop practical design solutions. Select suitable materials and manufacturing methods, including injection moulding, die casting, extrusion, and sheet metal. Maintain accurate CAD models and engineering documentation. Carry out engineering analyses such as tolerance studies, FMEA, DFSS, mould flow reviews, and FEA. Apply DFM/DFA principles, create Bills of Materials, and support tooling and product approval activities. Collaborate with engineering teams and suppliers to support production and resolve technical issues Experience Required: Mechanical Engineering qualification (Degree, HND, or HNC) with product development experience. 3+ years' experience developing electrical or electro-mechanical products. Strong SolidWorks skills, including solid and surface modelling. Experience with injection moulding, die casting, extrusion, and sheet metal design. Knowledge of FEA and engineering simulation. Experience with handheld consumer products is advantageous Understanding of product manufacturing and standards is beneficial. CFD, mould flow analysis, and supplier collaboration experience are desirable.

Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Engineer - Electrical Engineering (Power) Location: : Barrow-in-Furness / Filton - (Hybrid -2 days a fortnight (Barrow), or 1 day a week(Filton) dependent on business needs. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £47,241+ (Commensurate with skills and experience) Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Core duties: You'll be developing design solutions to agreed time, cost and quality in accordance with project or business milestones You'll develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme You'll understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities You'll produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications You'll provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer and support build activities, defect resolution and change management You'll support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Essential Skills: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle with knowledge of AC and DC electrical power systems Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Significant The Electrical Engineering Power Team: The Electrical Engineering Power Team are working on the UK's next-generation SSN design that incorporates technology from the UK, Australia and the United States. The team are responsible for defining the system elements required to feed into the submarine design and build process, including design documentation, spatial modelling and build outputs. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 28th June 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Operations Director (Manufacturing) Loughborough c£90,000p.a. DOE + car/allowance, bonuses and benefits Lead. Engineer. Transform. Are you a powerhouse of operational and engineering leadership? Do you have proven experience in the food-processing machinery sector? Do you thrive on driving precision, innovation and performance in complex, technical manufacturing environments? This isn t just another Operations Director role; it s your chance to lead engineering excellence and shape the future of a business designing and building world-class processing solutions for the food industry! The Company: growing and reputable company renowned for its innovation and precision in delivering high-performance food machinery. This role will also encompass working with sister businesses specialising in stainless-steel fabrication, packaging systems and automation: Aqualine by Alway, BagForm International and Alway Electrical. The group continues to expand and now seeks a visionary Operations Director to drive engineering and operational transformation. Role & Responsibilities of the Operations Director: Play a pivotal role within the Senior Leadership Team, contributing to high-level decisions that shape the future of operations and growth. Lead and empower cross-functional teams ensuring excellence across production, engineering, design and installation, ensuring excellence in performance, quality and delivery. Oversee the end-to-end engineering process from design for manufacture through to assembly and commissioning, ensuring technical accuracy, efficiency and innovation. Drive continuous improvement in manufacturing methods, materials and machinery design, embedding lean principles and world-class engineering practices. Champion technical excellence within project execution, supporting teams to solve complex engineering challenges and deliver precision-built equipment on time and on budget. Build and maintain high-trust relationships with customers, including handling involved, technical discussions and ensuring their needs are met with precision. Support the development and execution of strategic plans, working closely with the Managing Director and business owner. Help drive commercial success with a keen eye on operational KPIs, budgets, and customer satisfaction. About You as the Operations Director: Must have hands-on experience in manufacturing machinery for the food industry, this is essential. Deep technical expertise in precision engineering, stainless-steel fabrication and food-processing machinery design. Strong leadership track record in a high-pace, quality-driven engineering and manufacturing environment. Commercially astute with strong financial awareness across production costs, budgets and operational performance. A confident, empathetic leader who balances strategic vision with operational execution. Excellent communicator who thrives in technical environments and enjoys engaging with clients and stakeholders at all levels. Please note by applying for this role you give consent for ER Recruitment to retain your CV for up to 24 months for the purposes of assisting you to find your next role unless you notify us otherwise. While we aim to get back to all applicant, if you do not receive a response within 7working days then unfortunately your application has been unsuccessful on this occasion. We are here to help with your career so please send a copy of your CV to us. If you know of anyone else who is looking for their next opportunity, please feel free to refer them to us or pass on our details. We look forward to hearing from you.