The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis. In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design. My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications. Requirements Space systems experience ideally of large European space projects, system primes or ESA. Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects. System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis. Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA). Intelligent, logical approach to problem solving. Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering. You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources. Responsibilities Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts. Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams. Coordinate of top level Design, Verification and Compliance Matrix. Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned. Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.
Jun 23, 2026
Full time
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis. In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design. My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications. Requirements Space systems experience ideally of large European space projects, system primes or ESA. Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects. System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis. Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA). Intelligent, logical approach to problem solving. Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering. You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources. Responsibilities Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts. Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams. Coordinate of top level Design, Verification and Compliance Matrix. Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned. Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.
Senior Power Systems Engineer Space / Aerospace Guildford Hybrid An exciting opportunity to make a difference within the industry delivering highly innovative power solutions for spacecraft missions. This role involves responsibility for undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions. This key role will often sit within the core team of a satellite mission interacting with other technical leads across multiple disciplines to generate the technical solutions for innovative projects. Key Tasks Primary role will be the Power Subsystem Lead and Work Package Managers in Space Projects, including design, analysis, development, verification, and delivery of the power subsystem/modules. Typical duties include: Act as Power Subsystem Lead and Work Package Manager in Space Projects Ownership of the power subsystem and all aspects feeding into and out of it Identification and flow-down of spacecraft system requirements to the spacecraft power system Delivery of a power system solution that meets these requirements in line with defined company processes Management and verification of these requirements System / subsystem level interfacing and trade-offs Management of technical solutions, supporting other design engineers where required. Management and delivery of satellite power systems work packages including budget, schedule, planning, risk management and interactions with project managers Interface with internal and external customers Authoring of technical documents (including interface level FMEA, development/test/verification plans, test procedures and technical descriptions) Minor updates to circuit designs (changing obsolete parts, incremental performance improvements, ECN generations, etc) Support product development and new designs for future missions. Providing input into bids for future contracts. Previous Experience At least 3 years proven Power System Engineering experience in a systems / power electronics role, ideally in the Space or Aerospace Industries. In-depth understanding of analogue and power electronics analysis, design, build, and test in a system/subsystem design Familiarity with typical Power System Equipment in a spacecraft including: Battery Charge/Discharge Regulators, Power Distribution Modules, Relay/Activation Modules, Drive Electronics for motors/mechanism, DC-DC converters (range from 5W-3kW), Heater Control Boards, Batteries and Solar Panels Hands-on design and manufacturing experience and fault-finding during development of power electronics/analogue products Good presentation and discussion skills of technical material to/with a technical audience Recent experience with schematic capture and simulation software (e.g. MentorGraphics, OrCAD PSPICE, etc.) Benefits Highly competitive Salary dependent on experience Flexible working policies 32 days annual leave + BH Annual Company Bonus Scheme Up to 8% employer pension contribution Life Assurance (6X salary) Private Health Care Enhanced Maternity & Paternity leave Multiple Discount, Memberships schemes
Jun 23, 2026
Full time
Senior Power Systems Engineer Space / Aerospace Guildford Hybrid An exciting opportunity to make a difference within the industry delivering highly innovative power solutions for spacecraft missions. This role involves responsibility for undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions. This key role will often sit within the core team of a satellite mission interacting with other technical leads across multiple disciplines to generate the technical solutions for innovative projects. Key Tasks Primary role will be the Power Subsystem Lead and Work Package Managers in Space Projects, including design, analysis, development, verification, and delivery of the power subsystem/modules. Typical duties include: Act as Power Subsystem Lead and Work Package Manager in Space Projects Ownership of the power subsystem and all aspects feeding into and out of it Identification and flow-down of spacecraft system requirements to the spacecraft power system Delivery of a power system solution that meets these requirements in line with defined company processes Management and verification of these requirements System / subsystem level interfacing and trade-offs Management of technical solutions, supporting other design engineers where required. Management and delivery of satellite power systems work packages including budget, schedule, planning, risk management and interactions with project managers Interface with internal and external customers Authoring of technical documents (including interface level FMEA, development/test/verification plans, test procedures and technical descriptions) Minor updates to circuit designs (changing obsolete parts, incremental performance improvements, ECN generations, etc) Support product development and new designs for future missions. Providing input into bids for future contracts. Previous Experience At least 3 years proven Power System Engineering experience in a systems / power electronics role, ideally in the Space or Aerospace Industries. In-depth understanding of analogue and power electronics analysis, design, build, and test in a system/subsystem design Familiarity with typical Power System Equipment in a spacecraft including: Battery Charge/Discharge Regulators, Power Distribution Modules, Relay/Activation Modules, Drive Electronics for motors/mechanism, DC-DC converters (range from 5W-3kW), Heater Control Boards, Batteries and Solar Panels Hands-on design and manufacturing experience and fault-finding during development of power electronics/analogue products Good presentation and discussion skills of technical material to/with a technical audience Recent experience with schematic capture and simulation software (e.g. MentorGraphics, OrCAD PSPICE, etc.) Benefits Highly competitive Salary dependent on experience Flexible working policies 32 days annual leave + BH Annual Company Bonus Scheme Up to 8% employer pension contribution Life Assurance (6X salary) Private Health Care Enhanced Maternity & Paternity leave Multiple Discount, Memberships schemes
Yolk Recruitment Limited
Port Talbot, West Glamorgan
Electronics & Software Design Manager South Wales - M4 Corridor £70,000 - £85,000 Yolk Recruitment is managing a new opportunity for an Electronics Design Manager to join a growing advanced technology business with a strong record of developing, manufacturing and launching complex electronic products into global markets click apply for full job details
Jun 22, 2026
Full time
Electronics & Software Design Manager South Wales - M4 Corridor £70,000 - £85,000 Yolk Recruitment is managing a new opportunity for an Electronics Design Manager to join a growing advanced technology business with a strong record of developing, manufacturing and launching complex electronic products into global markets click apply for full job details
About The Role AV (Audio Visual) experience is essiential for this role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced Project Manager to be a key part of our Projects Delivery Department, representing proAV, taking full responsibility for ensuring the successful and profitable deployment of an end-to-end programme. They will be entrusted with the responsibility of working alongside the sales, operational and engineering teams in managing project scope for a range of client direct and construction projects. This is an exciting opportunity for an exceptional, experienced Project Manager to join an established operation with scope to drive and enhance the service at every opportunity. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Perform work on multiple projects within the budgeted cost and to the satisfaction of the client Ensure successful and profitable execution by following standards and supporting the implementation of processes and SOP s that drive consistency Liaison with other internal departments, clients and contractors Ensure that the H&S files are in place for your projects and that safe systems of work are put in place Understand the contractual requirements of your projects Ensure that technical and drawing information is available and correct to allow others to perform their works in an efficient manner Manage the setup elements of systems to prove the concept Deal with all aspects of the financial management of your projects including invoicing and variations ensuring that we are not financial exposed and get paid in a timely fashion Deal with all aspects interfacing of audio visual systems into our client s buildings this will encompass both hardware and software interfaces Represent the company at a senior level with the necessary level of professional conduct and presentation To develop your knowledge from both experience and research to become an expert in one or more of a particular area of our project work to whom others in the organisation can refer. Produce project documentation through the lifecycle of the project i.e. Programme of works, reporting, CRM Monitor the progress and performance against the programme, identifying, resolving, escalating operational problems and minimizing delays Attend pretender interviews, supporting sales and estimating Desirable skills: Possess a good underpinning technical knowledge of Electronics and Audio Visual Systems An understanding of contracts and commercial processes Ability to plan and organise projects and schedule work Ability to prioritize and work under pressure is essential Competent to a high level of computer literacy Able to work as part of a team Ability to think laterally finding an appropriate solution to fulfil an application Good communication skills both verbal and written, being able to communicate with company executives to building contractors Ability to work to the highest quality standards, with attention to detail ensuring that we complete our work thoroughly, never walking away from a problem. Organised and flexible with the ability to approach different types of tasks during the working day Demonstrate a professional, enthusiastic & committed approach at all times. Hours of work: 40 hours per week, 9 hours a day, 8.30am-5.30pm, including an hour unpaid break, Monday-Friday. About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equality, Diversity & Inclusion: proAV is an equal opportunity employer that is committed to supporting and promoting an inclusive culture for all employees and job applicants. We want everyone to feel comfortable being themselves and create a culture where we understand and respect each other s differences. proAV does not tolerate discrimination based on age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We make employment decision based on the needs of our business and the qualifications and/or experience of the individual. proAV offers personal and professional development opportunities, not just through traditional qualifications, but also through Apprenticeship schemes, internal training and mentorship programmes. We support employees and job applicants with their work-life balance through our family friendly policies and practices. We encourage all to apply.
Jun 22, 2026
Full time
About The Role AV (Audio Visual) experience is essiential for this role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced Project Manager to be a key part of our Projects Delivery Department, representing proAV, taking full responsibility for ensuring the successful and profitable deployment of an end-to-end programme. They will be entrusted with the responsibility of working alongside the sales, operational and engineering teams in managing project scope for a range of client direct and construction projects. This is an exciting opportunity for an exceptional, experienced Project Manager to join an established operation with scope to drive and enhance the service at every opportunity. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Perform work on multiple projects within the budgeted cost and to the satisfaction of the client Ensure successful and profitable execution by following standards and supporting the implementation of processes and SOP s that drive consistency Liaison with other internal departments, clients and contractors Ensure that the H&S files are in place for your projects and that safe systems of work are put in place Understand the contractual requirements of your projects Ensure that technical and drawing information is available and correct to allow others to perform their works in an efficient manner Manage the setup elements of systems to prove the concept Deal with all aspects of the financial management of your projects including invoicing and variations ensuring that we are not financial exposed and get paid in a timely fashion Deal with all aspects interfacing of audio visual systems into our client s buildings this will encompass both hardware and software interfaces Represent the company at a senior level with the necessary level of professional conduct and presentation To develop your knowledge from both experience and research to become an expert in one or more of a particular area of our project work to whom others in the organisation can refer. Produce project documentation through the lifecycle of the project i.e. Programme of works, reporting, CRM Monitor the progress and performance against the programme, identifying, resolving, escalating operational problems and minimizing delays Attend pretender interviews, supporting sales and estimating Desirable skills: Possess a good underpinning technical knowledge of Electronics and Audio Visual Systems An understanding of contracts and commercial processes Ability to plan and organise projects and schedule work Ability to prioritize and work under pressure is essential Competent to a high level of computer literacy Able to work as part of a team Ability to think laterally finding an appropriate solution to fulfil an application Good communication skills both verbal and written, being able to communicate with company executives to building contractors Ability to work to the highest quality standards, with attention to detail ensuring that we complete our work thoroughly, never walking away from a problem. Organised and flexible with the ability to approach different types of tasks during the working day Demonstrate a professional, enthusiastic & committed approach at all times. Hours of work: 40 hours per week, 9 hours a day, 8.30am-5.30pm, including an hour unpaid break, Monday-Friday. About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equality, Diversity & Inclusion: proAV is an equal opportunity employer that is committed to supporting and promoting an inclusive culture for all employees and job applicants. We want everyone to feel comfortable being themselves and create a culture where we understand and respect each other s differences. proAV does not tolerate discrimination based on age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We make employment decision based on the needs of our business and the qualifications and/or experience of the individual. proAV offers personal and professional development opportunities, not just through traditional qualifications, but also through Apprenticeship schemes, internal training and mentorship programmes. We support employees and job applicants with their work-life balance through our family friendly policies and practices. We encourage all to apply.
About the Role: We are looking for a Lead Hardware Engineer to take technical ownership of the design and delivery of automotive hardware solutions for innovative electric drive systems . Working in a collaborative environment, you will manage a team of hardware engineers to deliver robust, high-volume production electronics. The Must-Haves: Technical Expertise: Deep experience designing complex, high-voltage (600V) power electronics (such as inverters, bi-directional DC-DC converters, and 3-phase motor drives) . Leadership: A proven track record of leading, mentoring, and managing a team of hardware engineers. Production Knowledge: Strong understanding of high-volume automotive product development, with a focus on cost optimization and manufacturability (DFM/DFC/FMEA). Testing & Standards: Experience overseeing test strategies, debugging hardware, and ensuring compliance with automotive safety and EMC regulations. What You'll Do: Lead hardware design from initial concept through validation and production release . Plan technical milestones and manage project risks alongside Project Managers . Collaborate closely with software, mechanical, systems, and test teams . Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 20, 2026
Full time
About the Role: We are looking for a Lead Hardware Engineer to take technical ownership of the design and delivery of automotive hardware solutions for innovative electric drive systems . Working in a collaborative environment, you will manage a team of hardware engineers to deliver robust, high-volume production electronics. The Must-Haves: Technical Expertise: Deep experience designing complex, high-voltage (600V) power electronics (such as inverters, bi-directional DC-DC converters, and 3-phase motor drives) . Leadership: A proven track record of leading, mentoring, and managing a team of hardware engineers. Production Knowledge: Strong understanding of high-volume automotive product development, with a focus on cost optimization and manufacturability (DFM/DFC/FMEA). Testing & Standards: Experience overseeing test strategies, debugging hardware, and ensuring compliance with automotive safety and EMC regulations. What You'll Do: Lead hardware design from initial concept through validation and production release . Plan technical milestones and manage project risks alongside Project Managers . Collaborate closely with software, mechanical, systems, and test teams . Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
About the Role We are looking for an experienced and motivated Senior Systems Team Lead to provide technical leadership, coordination, and delivery oversight across multidisciplinary engineering projects. This role is ideal for someone with a strong background in systems or software engineering who enjoys leading teams, supporting project delivery, and helping shape engineering strategy. You will work closely with project managers, technical specialists, and stakeholders to ensure projects are delivered effectively, on time, and to a high standard. The position combines people leadership, project coordination, and technical oversight within a collaborative engineering environment. Key Responsibilities Lead and coordinate systems and/or software engineering activities across multiple projects Support project planning, scheduling, resource management, and delivery activities Work with engineering and project teams to understand priorities, risks, dependencies, and delivery timelines Provide regular updates on project progress, resourcing needs, and delivery status Contribute to project estimates, planning activities, and ongoing budget management Support continuous improvement initiatives and engineering best practice Mentor and support engineers in their professional and career development Collaborate with cross-functional teams to ensure successful project outcomes Skills & Experience Proven experience leading engineering teams within systems, software, or integrated engineering environments Experience delivering complex technical projects to agreed schedules and budgets Strong understanding of systems engineering and/or software development lifecycles Experience with requirements management, design reviews, modelling, simulation, or technical assurance activities Ability to manage stakeholders and coordinate across multiple disciplines Strong communication, organisational, and problem-solving skills Degree-qualified (or equivalent experience) in Systems Engineering, Software Engineering, Electronics, Physics, Mathematics, or a related technical discipline Desirable Experience Experience in any of the following areas would be beneficial, though not essential: Safety-critical or highly regulated environments Control systems, embedded systems, or real-time applications Engineering lifecycle and requirements management tools Systems modelling and simulation environments The Team You will be joining a collaborative engineering team focused on delivering complex technical solutions across a varied project portfolio. The role involves working closely with engineering managers and project leads to support both short-term delivery goals and longer-term strategic planning. This is an excellent opportunity for someone looking to combine hands-on technical understanding with leadership and team development responsibilities in a supportive and forward-thinking environment.
Jun 20, 2026
Full time
About the Role We are looking for an experienced and motivated Senior Systems Team Lead to provide technical leadership, coordination, and delivery oversight across multidisciplinary engineering projects. This role is ideal for someone with a strong background in systems or software engineering who enjoys leading teams, supporting project delivery, and helping shape engineering strategy. You will work closely with project managers, technical specialists, and stakeholders to ensure projects are delivered effectively, on time, and to a high standard. The position combines people leadership, project coordination, and technical oversight within a collaborative engineering environment. Key Responsibilities Lead and coordinate systems and/or software engineering activities across multiple projects Support project planning, scheduling, resource management, and delivery activities Work with engineering and project teams to understand priorities, risks, dependencies, and delivery timelines Provide regular updates on project progress, resourcing needs, and delivery status Contribute to project estimates, planning activities, and ongoing budget management Support continuous improvement initiatives and engineering best practice Mentor and support engineers in their professional and career development Collaborate with cross-functional teams to ensure successful project outcomes Skills & Experience Proven experience leading engineering teams within systems, software, or integrated engineering environments Experience delivering complex technical projects to agreed schedules and budgets Strong understanding of systems engineering and/or software development lifecycles Experience with requirements management, design reviews, modelling, simulation, or technical assurance activities Ability to manage stakeholders and coordinate across multiple disciplines Strong communication, organisational, and problem-solving skills Degree-qualified (or equivalent experience) in Systems Engineering, Software Engineering, Electronics, Physics, Mathematics, or a related technical discipline Desirable Experience Experience in any of the following areas would be beneficial, though not essential: Safety-critical or highly regulated environments Control systems, embedded systems, or real-time applications Engineering lifecycle and requirements management tools Systems modelling and simulation environments The Team You will be joining a collaborative engineering team focused on delivering complex technical solutions across a varied project portfolio. The role involves working closely with engineering managers and project leads to support both short-term delivery goals and longer-term strategic planning. This is an excellent opportunity for someone looking to combine hands-on technical understanding with leadership and team development responsibilities in a supportive and forward-thinking environment.
About the Role: We are looking for a Lead Hardware Engineer to take technical ownership of the design and delivery of automotive hardware solutions for innovative electric drive systems . Working in a collaborative environment, you will manage a team of hardware engineers to deliver robust, high-volume production electronics. The Must-Haves: Technical Expertise: Deep experience designing complex, high-voltage (600V) power electronics (such as inverters, bi-directional DC-DC converters, and 3-phase motor drives) . Leadership: A proven track record of leading, mentoring, and managing a team of hardware engineers. Production Knowledge: Strong understanding of high-volume automotive product development, with a focus on cost optimization and manufacturability (DFM/DFC/FMEA). Testing & Standards: Experience overseeing test strategies, debugging hardware, and ensuring compliance with automotive safety and EMC regulations. What You'll Do: Lead hardware design from initial concept through validation and production release . Plan technical milestones and manage project risks alongside Project Managers . Collaborate closely with software, mechanical, systems, and test teams . Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 20, 2026
Full time
About the Role: We are looking for a Lead Hardware Engineer to take technical ownership of the design and delivery of automotive hardware solutions for innovative electric drive systems . Working in a collaborative environment, you will manage a team of hardware engineers to deliver robust, high-volume production electronics. The Must-Haves: Technical Expertise: Deep experience designing complex, high-voltage (600V) power electronics (such as inverters, bi-directional DC-DC converters, and 3-phase motor drives) . Leadership: A proven track record of leading, mentoring, and managing a team of hardware engineers. Production Knowledge: Strong understanding of high-volume automotive product development, with a focus on cost optimization and manufacturability (DFM/DFC/FMEA). Testing & Standards: Experience overseeing test strategies, debugging hardware, and ensuring compliance with automotive safety and EMC regulations. What You'll Do: Lead hardware design from initial concept through validation and production release . Plan technical milestones and manage project risks alongside Project Managers . Collaborate closely with software, mechanical, systems, and test teams . Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Lead Hardware Engineer Norwich This is an opportunity to join an innovative engineering company developing next-generation electric drive systems for automotive and mobility applications. You will take technical leadership of automotive hardware development, driving the design of high-voltage, production-ready systems from concept through to validation and full-scale manufacturing. Responsibilities: Leading the design and development of automotive hardware including 600V power electronics, inverters, bi-directional DC-DC converters and battery charging systems. Defining hardware architecture and taking ownership of delivery through concept, design, validation and production release. Leading and mentoring a team of hardware engineers, ensuring delivery against technical, cost and schedule targets. Driving Design for Manufacture (DFM), Design for Cost (DFC) and FMEA activities to ensure scalable, high-volume production readiness. Working closely with project managers, software, systems and manufacturing teams to ensure robust integration and delivery. Supporting supplier engagement, component selection, cost reduction and value engineering activities. Requirements: Strong experience in automotive or electrification hardware development, ideally within high-voltage power electronics systems. Proven ability to lead engineering teams and deliver complex hardware projects in a structured environment. Strong understanding of high-volume automotive design, including cost, manufacturability and production scalability. Experience with FMEA, DVP, reliability engineering and hardware validation activities. Ability to work across multidisciplinary teams including software, mechanical, systems and manufacturing. Bonus Skills: Experience with 600V power electronics, inverters, DC-DC converters or EV charging systems. Knowledge of EMC, safety standards and automotive certification processes. Experience driving cost reduction, supplier development and production optimisation. Apply now to join a highly innovative company operating at the forefront of electrification technology. Platform Recruitment: Platform Recruitment covers a wide range of IT and Engineering positions, including Electronics, Embedded Software, FPGA, Mechanical, C++, DevOps, Technical Sales, Project Management and more.
Jun 20, 2026
Full time
Lead Hardware Engineer Norwich This is an opportunity to join an innovative engineering company developing next-generation electric drive systems for automotive and mobility applications. You will take technical leadership of automotive hardware development, driving the design of high-voltage, production-ready systems from concept through to validation and full-scale manufacturing. Responsibilities: Leading the design and development of automotive hardware including 600V power electronics, inverters, bi-directional DC-DC converters and battery charging systems. Defining hardware architecture and taking ownership of delivery through concept, design, validation and production release. Leading and mentoring a team of hardware engineers, ensuring delivery against technical, cost and schedule targets. Driving Design for Manufacture (DFM), Design for Cost (DFC) and FMEA activities to ensure scalable, high-volume production readiness. Working closely with project managers, software, systems and manufacturing teams to ensure robust integration and delivery. Supporting supplier engagement, component selection, cost reduction and value engineering activities. Requirements: Strong experience in automotive or electrification hardware development, ideally within high-voltage power electronics systems. Proven ability to lead engineering teams and deliver complex hardware projects in a structured environment. Strong understanding of high-volume automotive design, including cost, manufacturability and production scalability. Experience with FMEA, DVP, reliability engineering and hardware validation activities. Ability to work across multidisciplinary teams including software, mechanical, systems and manufacturing. Bonus Skills: Experience with 600V power electronics, inverters, DC-DC converters or EV charging systems. Knowledge of EMC, safety standards and automotive certification processes. Experience driving cost reduction, supplier development and production optimisation. Apply now to join a highly innovative company operating at the forefront of electrification technology. Platform Recruitment: Platform Recruitment covers a wide range of IT and Engineering positions, including Electronics, Embedded Software, FPGA, Mechanical, C++, DevOps, Technical Sales, Project Management and more.
About Us DTC A Codan Company is a technology company based in Whiteley, Hampshire. We specialise in the research and development of mission critical RF communication systems. Our engineers work at the edge of what is scientifically possible, using cutting-edge technology to deliver highly reliable, secure, long-range wireless solutions. Our products are used across defence, uncrewed systems, government, and broadcast markets. About the Role Due to continued growth and success across the business, we are looking for a Senior Embedded Engineer to provide technical leadership and hands-on embedded software expertise within our engineering team. This role is ideal for an experienced embedded engineer who enjoys taking ownership of technical delivery, supporting other engineers, and helping turn project requirements into clear, structured work packages. This position provides technical and project leadership for Embedded Engineers across key initiatives, without direct line management responsibilities. You will support the Embedded Manager by helping to interpret requirements, break down technical work, delegate tasks across the team, and monitor progress from concept through to completion. You will: -Lead and coordinate embedded engineering activity on one or more projects -Interpret project requirements and translate them into clear technical work packages -Delegate and track work across embedded engineering team members -Provide technical guidance and support to other engineers -Develop high-quality embedded C++ software for real-time and embedded Linux systems -Work across the full product lifecycle, from concept through to production -Collaborate closely with multidisciplinary engineering teams and project managers -Contribute to the delivery of advanced wireless communication systems You ll also have the opportunity to work with software-defined radio, wireless mesh networks, video & audio processing and cutting-edge RF technologies. What We re Looking For Essential: -Strong team leadership skills within an embedded engineering environment -Ability to interpret project requirements, delegate work, and support delivery through to completion -Strong hands-on embedded C++ development experience -Experience working with embedded Linux -Strong understanding of electronics and working with test equipment -Degree in Electronics, Engineering, Physics, or a related discipline Desirable: -Experience with Yocto -Embedded C development experience -FPGA development experience using VHDL -Experience with Xilinx FPGAs -Experience with Qt -Python development experience -Exposure to SDR, RF systems, wireless communications, video, audio processing, or DSP -Background in defence, telecommunications, broadcast, or similar industries Why Join DTC -Work on cutting-edge technology at the limits of what s possible -Own your work from design through to delivery -Be part of a highly skilled, collaborative engineering team -Flexible working, competitive salary, and strong benefits package -Ongoing training and development, including exposure to new technologies Successful applicants will need to be eligible for Security Clearance. Interested in a career with DTC? Click 'apply' to start the process
Jun 19, 2026
Full time
About Us DTC A Codan Company is a technology company based in Whiteley, Hampshire. We specialise in the research and development of mission critical RF communication systems. Our engineers work at the edge of what is scientifically possible, using cutting-edge technology to deliver highly reliable, secure, long-range wireless solutions. Our products are used across defence, uncrewed systems, government, and broadcast markets. About the Role Due to continued growth and success across the business, we are looking for a Senior Embedded Engineer to provide technical leadership and hands-on embedded software expertise within our engineering team. This role is ideal for an experienced embedded engineer who enjoys taking ownership of technical delivery, supporting other engineers, and helping turn project requirements into clear, structured work packages. This position provides technical and project leadership for Embedded Engineers across key initiatives, without direct line management responsibilities. You will support the Embedded Manager by helping to interpret requirements, break down technical work, delegate tasks across the team, and monitor progress from concept through to completion. You will: -Lead and coordinate embedded engineering activity on one or more projects -Interpret project requirements and translate them into clear technical work packages -Delegate and track work across embedded engineering team members -Provide technical guidance and support to other engineers -Develop high-quality embedded C++ software for real-time and embedded Linux systems -Work across the full product lifecycle, from concept through to production -Collaborate closely with multidisciplinary engineering teams and project managers -Contribute to the delivery of advanced wireless communication systems You ll also have the opportunity to work with software-defined radio, wireless mesh networks, video & audio processing and cutting-edge RF technologies. What We re Looking For Essential: -Strong team leadership skills within an embedded engineering environment -Ability to interpret project requirements, delegate work, and support delivery through to completion -Strong hands-on embedded C++ development experience -Experience working with embedded Linux -Strong understanding of electronics and working with test equipment -Degree in Electronics, Engineering, Physics, or a related discipline Desirable: -Experience with Yocto -Embedded C development experience -FPGA development experience using VHDL -Experience with Xilinx FPGAs -Experience with Qt -Python development experience -Exposure to SDR, RF systems, wireless communications, video, audio processing, or DSP -Background in defence, telecommunications, broadcast, or similar industries Why Join DTC -Work on cutting-edge technology at the limits of what s possible -Own your work from design through to delivery -Be part of a highly skilled, collaborative engineering team -Flexible working, competitive salary, and strong benefits package -Ongoing training and development, including exposure to new technologies Successful applicants will need to be eligible for Security Clearance. Interested in a career with DTC? Click 'apply' to start the process
Application Software Engineer Location: Fareham, Hampshire Salary: Up to 65,000 DOE + Benefits We are seeking an experienced Application Software Engineer to join a leading engineering team developing innovative software solutions for advanced underwater robotics systems. This is an exciting opportunity to contribute to the next generation of autonomous and remotely operated underwater vehicles, working across both application and backend software development. Key Responsibilities Design, develop, and implement application software solutions for underwater robotics and autonomous systems. Architect and develop backend server infrastructure and software frameworks. Develop high-performance software in C++ for next-generation underwater vehicles. Maintain, support, and enhance existing software products and codebases. Collaborate with multidisciplinary engineering teams to deliver robust and scalable software solutions. Contribute to software architecture, design reviews, and continuous improvement initiatives. Required Skills & Experience Degree in Software Engineering, Computer Science, Electronics, Engineering, or a related discipline, or equivalent commercial experience. Extensive commercial experience developing software in C++ . Experience developing control or automation software for complex systems. Strong understanding of software architecture, design patterns, and best practices. Experience designing and developing backend server applications and services. Familiarity with modern web technologies and web-based application development. Exposure to front-end development, with the ability to create functional user interfaces and web pages. Proficiency in one or more of the following technologies: JavaScript, Python, XML, JSON, HTML, and CSS . Experience developing software on both Windows and Linux platforms. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Jun 19, 2026
Full time
Application Software Engineer Location: Fareham, Hampshire Salary: Up to 65,000 DOE + Benefits We are seeking an experienced Application Software Engineer to join a leading engineering team developing innovative software solutions for advanced underwater robotics systems. This is an exciting opportunity to contribute to the next generation of autonomous and remotely operated underwater vehicles, working across both application and backend software development. Key Responsibilities Design, develop, and implement application software solutions for underwater robotics and autonomous systems. Architect and develop backend server infrastructure and software frameworks. Develop high-performance software in C++ for next-generation underwater vehicles. Maintain, support, and enhance existing software products and codebases. Collaborate with multidisciplinary engineering teams to deliver robust and scalable software solutions. Contribute to software architecture, design reviews, and continuous improvement initiatives. Required Skills & Experience Degree in Software Engineering, Computer Science, Electronics, Engineering, or a related discipline, or equivalent commercial experience. Extensive commercial experience developing software in C++ . Experience developing control or automation software for complex systems. Strong understanding of software architecture, design patterns, and best practices. Experience designing and developing backend server applications and services. Familiarity with modern web technologies and web-based application development. Exposure to front-end development, with the ability to create functional user interfaces and web pages. Proficiency in one or more of the following technologies: JavaScript, Python, XML, JSON, HTML, and CSS . Experience developing software on both Windows and Linux platforms. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Overview An established engineering organisation delivering secure, mission-critical technology solutions is seeking a Principal Software Engineering Manager to provide technical leadership across a portfolio of complex development programmes. This role combines strategic software leadership with hands-on technical oversight, supporting the delivery of embedded and application software solutions within highly regulated environments. You will work across multiple engineering disciplines, helping to shape software architecture, development practices, tooling, and technical direction while supporting a team of experienced software engineers. Key Responsibilities Provide technical leadership across multiple software projects, ensuring robust architectures, effective reuse of software components, and adoption of appropriate development tools and methodologies. Support software leads and project teams in defining software requirements, architecture, design approaches, and implementation strategies. Drive consistency in software engineering standards, processes, and best practice across development teams. Work closely with systems, hardware and firmware engineers to ensure integrated and coherent technical solutions. Support project planning activities, helping teams deliver value to customers through well-structured development roadmaps. Review software designs, architectures, and implementation approaches, providing guidance and resolving technical challenges where required. Promote modular software design and the creation of reusable software frameworks and components. Lead the adoption of modern software engineering practices including CI/CD, DevOps, DevSecOps, automated testing, and secure development principles. Champion continuous improvement initiatives relating to software tools, processes, standards, and ways of working. Mentor and develop engineers, supporting technical growth across the wider software function. Lead technical reviews and approve key engineering documentation. Contribute to customer proposals, bids and technical solution development, including effort estimation and risk assessment. Support information security and governance requirements in line with organisational and customer obligations. Skills & Experience Significant experience in software engineering leadership within a complex engineering environment. Strong background in one or more of the following: C/C++ Rust Embedded software development Real-Time Operating Systems (RTOS) Windows or Linux application development Device driver development Proven track record delivering complex software solutions throughout the full development lifecycle. Strong understanding of software architecture, design methodologies, coding standards, verification, validation and configuration management. Experience implementing software development best practice, including automated testing and continuous integration frameworks. Familiarity with version control, defect management and change management tools. Experience working within regulated industries such as defence, aerospace, space, communications or other safety/security-critical sectors. Knowledge of modelling techniques and tools such as UML, SysML or Enterprise Architect would be beneficial. Exposure to secure software development and cryptographic systems would be advantageous. Degree qualified in Software Engineering, Computer Science, Electronics Engineering, Mathematics, Physics or a related discipline.
Jun 18, 2026
Full time
Overview An established engineering organisation delivering secure, mission-critical technology solutions is seeking a Principal Software Engineering Manager to provide technical leadership across a portfolio of complex development programmes. This role combines strategic software leadership with hands-on technical oversight, supporting the delivery of embedded and application software solutions within highly regulated environments. You will work across multiple engineering disciplines, helping to shape software architecture, development practices, tooling, and technical direction while supporting a team of experienced software engineers. Key Responsibilities Provide technical leadership across multiple software projects, ensuring robust architectures, effective reuse of software components, and adoption of appropriate development tools and methodologies. Support software leads and project teams in defining software requirements, architecture, design approaches, and implementation strategies. Drive consistency in software engineering standards, processes, and best practice across development teams. Work closely with systems, hardware and firmware engineers to ensure integrated and coherent technical solutions. Support project planning activities, helping teams deliver value to customers through well-structured development roadmaps. Review software designs, architectures, and implementation approaches, providing guidance and resolving technical challenges where required. Promote modular software design and the creation of reusable software frameworks and components. Lead the adoption of modern software engineering practices including CI/CD, DevOps, DevSecOps, automated testing, and secure development principles. Champion continuous improvement initiatives relating to software tools, processes, standards, and ways of working. Mentor and develop engineers, supporting technical growth across the wider software function. Lead technical reviews and approve key engineering documentation. Contribute to customer proposals, bids and technical solution development, including effort estimation and risk assessment. Support information security and governance requirements in line with organisational and customer obligations. Skills & Experience Significant experience in software engineering leadership within a complex engineering environment. Strong background in one or more of the following: C/C++ Rust Embedded software development Real-Time Operating Systems (RTOS) Windows or Linux application development Device driver development Proven track record delivering complex software solutions throughout the full development lifecycle. Strong understanding of software architecture, design methodologies, coding standards, verification, validation and configuration management. Experience implementing software development best practice, including automated testing and continuous integration frameworks. Familiarity with version control, defect management and change management tools. Experience working within regulated industries such as defence, aerospace, space, communications or other safety/security-critical sectors. Knowledge of modelling techniques and tools such as UML, SysML or Enterprise Architect would be beneficial. Exposure to secure software development and cryptographic systems would be advantageous. Degree qualified in Software Engineering, Computer Science, Electronics Engineering, Mathematics, Physics or a related discipline.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Join us in creating the most innovative robotic technology for the harshest environment in the deepest oceans and most turbulent waters.We lead the world with the most advanced engineering, electronics and software systems for pioneering electric underwater technology. We don't just create products - we are revolutionising the underwater world. So come and be part of an innovative and agile team that is dedicated to smart and inspired technology that is rapidly changing the future of underwater robotics. The Lead Engineering Technician will oversee daily engineering R&D facility operations, execute complex technical tasks and coordinate the daily work of the technicians to meet operations goals. The role combines hands-on technical execution - such as building test equipment - with planning, task management and ensuring a safe, efficient working environment. Key accountabilities and responsibilities: Area Ownership Asset management - maintain equipment ensuring it is fully operational and fit for purpose Safety Lead - Serve as safety lead for assigned area ensuring operations are compliant with company protocols and regulatory safety standards. Including ensuring high quality risk assessments are in place and up to date 5S Standard - Champion 5s workplace optimisation standards throughout assigned area ensuring operations are productive and efficient Management of equipment calibration status in line with the company calibration recall process / calibration register Practical Tasks Perform practical hands on builds of electro-mechanical hardware as and when required (Jigs / fixtures / wiring harness / etc) Perform Engineering test routines to defined test specifications and document results to assist with Engineering design reviews (Electrical / Mechanical) Perform technical review studies on Engineering samples / sub-assemblies to utilise technical problem solving (first Line support) Team Coordination Schedule, assign and review daily tasks for the technicians team Train and mentor technicians on technical skills and protocols Serve as a point of contact between engineers, project managers and technicians Essential Skills: HNC or Degree in a relevant engineering discipline Competent in Electrical and Electronic Engineering environment Previous experience in personnel supervision / management, to coach and mentor staff and manage their workload, and setting priorities Ability to work unsupervised to tight timescales Working knowledge of Mechanical Engineering principles Working knowledge of Software principles in relation to products - embedded and associated tool chains Competent and able to use Microsoft Office to a high level Min 3 years in a test focused role, or within test equipment development Proven experience in data capture and analysis Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Excellent knowledge of test equipment and platforms Data capture - logging Creation of test reports Innovative and creative mind-set with technical awareness Excellent communicator: both written and verbal Enthusiasm, drive and personality! Desirable: Degree in Electrical and Electronic Engineering Formal qualification in Mechanical Engineering or Software Experienced and high level competence with National Instruments LabView and TestStand software tool chains within a test and measurement environment Experienced with creating / modifying software scripts / programs e.g. Python, Visual Basic, C, C++, etc. Expert in the Verification & Validation processes and associated tools and techniques Create high quality test reports Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Jun 18, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Join us in creating the most innovative robotic technology for the harshest environment in the deepest oceans and most turbulent waters.We lead the world with the most advanced engineering, electronics and software systems for pioneering electric underwater technology. We don't just create products - we are revolutionising the underwater world. So come and be part of an innovative and agile team that is dedicated to smart and inspired technology that is rapidly changing the future of underwater robotics. The Lead Engineering Technician will oversee daily engineering R&D facility operations, execute complex technical tasks and coordinate the daily work of the technicians to meet operations goals. The role combines hands-on technical execution - such as building test equipment - with planning, task management and ensuring a safe, efficient working environment. Key accountabilities and responsibilities: Area Ownership Asset management - maintain equipment ensuring it is fully operational and fit for purpose Safety Lead - Serve as safety lead for assigned area ensuring operations are compliant with company protocols and regulatory safety standards. Including ensuring high quality risk assessments are in place and up to date 5S Standard - Champion 5s workplace optimisation standards throughout assigned area ensuring operations are productive and efficient Management of equipment calibration status in line with the company calibration recall process / calibration register Practical Tasks Perform practical hands on builds of electro-mechanical hardware as and when required (Jigs / fixtures / wiring harness / etc) Perform Engineering test routines to defined test specifications and document results to assist with Engineering design reviews (Electrical / Mechanical) Perform technical review studies on Engineering samples / sub-assemblies to utilise technical problem solving (first Line support) Team Coordination Schedule, assign and review daily tasks for the technicians team Train and mentor technicians on technical skills and protocols Serve as a point of contact between engineers, project managers and technicians Essential Skills: HNC or Degree in a relevant engineering discipline Competent in Electrical and Electronic Engineering environment Previous experience in personnel supervision / management, to coach and mentor staff and manage their workload, and setting priorities Ability to work unsupervised to tight timescales Working knowledge of Mechanical Engineering principles Working knowledge of Software principles in relation to products - embedded and associated tool chains Competent and able to use Microsoft Office to a high level Min 3 years in a test focused role, or within test equipment development Proven experience in data capture and analysis Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Excellent knowledge of test equipment and platforms Data capture - logging Creation of test reports Innovative and creative mind-set with technical awareness Excellent communicator: both written and verbal Enthusiasm, drive and personality! Desirable: Degree in Electrical and Electronic Engineering Formal qualification in Mechanical Engineering or Software Experienced and high level competence with National Instruments LabView and TestStand software tool chains within a test and measurement environment Experienced with creating / modifying software scripts / programs e.g. Python, Visual Basic, C, C++, etc. Expert in the Verification & Validation processes and associated tools and techniques Create high quality test reports Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Technical Project Engineering Lead Want to lead complex engineering work where mechanical, electronics and Embedded systems all come together? This is a hands-on technical leadership role for someone who enjoys shaping new product design, guiding project decisions and working close to customers on high-value engineering solutions. You'll join a specialist Embedded computing environment, taking technical ownership across design, manufacture, test and delivery. The work is office-based in Wokingham, with projects linked to UK defence, so British citizenship is essential. What you'll be trusted to lead. Lead the technical design of new products and supporting engineering projects. Work with Project Managers to define timescales, resources, risks and delivery plans. Support RFQs, RFIs and customer bids, including solution design, cost input and risk analysis. Guide documentation, design records and technical evidence in line with quality procedures. Improve engineering processes where you see a better way to work. Keep projects aligned with ISO, quality, health and safety expectations. The technical depth you'll bring. Broad experience across mechanical and electronics design, manufacture and test. 3D CAD capability, ideally SolidWorks, though other platforms are welcome. Understanding of schematic capture and electrical design principles. Experience with high-level system design. Knowledge of chassis, mechanical assemblies and electrical assemblies. Practical exposure to DFMA, DFMEA and design for test. Awareness of safety, EMC, environmental or defence-related standards. Familiarity with software or firmware environments, including Windows, Linux, microcontrollers or RTOS. The essentials. Technical project leadership experience in a high-tech engineering environment. Strong knowledge of electronics, Embedded systems or complex engineered products. Mechanical, Mechatronics or relevant Engineering degree, or equivalent experience. British passport holder due to MOD-related work. Package. Salary £55,000 - £60,000, plus 15% bonus, private medical insurance, pension, life assurance and group income protection. Full time onsite in Wokingham
Jun 18, 2026
Full time
Technical Project Engineering Lead Want to lead complex engineering work where mechanical, electronics and Embedded systems all come together? This is a hands-on technical leadership role for someone who enjoys shaping new product design, guiding project decisions and working close to customers on high-value engineering solutions. You'll join a specialist Embedded computing environment, taking technical ownership across design, manufacture, test and delivery. The work is office-based in Wokingham, with projects linked to UK defence, so British citizenship is essential. What you'll be trusted to lead. Lead the technical design of new products and supporting engineering projects. Work with Project Managers to define timescales, resources, risks and delivery plans. Support RFQs, RFIs and customer bids, including solution design, cost input and risk analysis. Guide documentation, design records and technical evidence in line with quality procedures. Improve engineering processes where you see a better way to work. Keep projects aligned with ISO, quality, health and safety expectations. The technical depth you'll bring. Broad experience across mechanical and electronics design, manufacture and test. 3D CAD capability, ideally SolidWorks, though other platforms are welcome. Understanding of schematic capture and electrical design principles. Experience with high-level system design. Knowledge of chassis, mechanical assemblies and electrical assemblies. Practical exposure to DFMA, DFMEA and design for test. Awareness of safety, EMC, environmental or defence-related standards. Familiarity with software or firmware environments, including Windows, Linux, microcontrollers or RTOS. The essentials. Technical project leadership experience in a high-tech engineering environment. Strong knowledge of electronics, Embedded systems or complex engineered products. Mechanical, Mechatronics or relevant Engineering degree, or equivalent experience. British passport holder due to MOD-related work. Package. Salary £55,000 - £60,000, plus 15% bonus, private medical insurance, pension, life assurance and group income protection. Full time onsite in Wokingham
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Join us in creating the most innovative robotic technology for the harshest environment in the deepest oceans and most turbulent waters. We lead the world with the most advanced engineering, electronics and software systems for pioneering electric underwater technology. We don't just create products - we are revolutionising the underwater world. So come and be part of an innovative and agile team that is dedicated to smart and inspired technology that is rapidly changing the future of underwater robotics. This is a new role onsite at our Fareham Campus. Role to engineer test solutions for electro-mechanical products to ensure systems are thoroughly exercised to satisfy product requirements. With a wide ranging remit to manage and execute the full lifecycle of test engineering, from definition of test-cases through development of test tools to the execution of testing. As such it will suit someone with a broad spread of engineering knowledge, imagination and drive Key accountabilities and responsibilities: Lead Test Engineer within the department, to be the guide and support resource for the general Test Engineers Line manager for Test Engineering group - manage out workload within the Test Engineering team and external 3rd parties as required Analyse Master / Systems / Sub-System requirements and conformance specifications to derive test requirements Plan, design and communicate test cases which verify and validate requirements across a broad spread of electro-mechanical systems for both the development and production lifecycle phases Responsible for closure of workload packages derived from requirements analysis, management of formal Test Reports and other evidence based materials across the Test Engineering team to support the conclusions of investigations Define the design of test jigs, harnesses and software to allow execution of test cases including, where appropriate, automation. Implement data processing/ filtering software in a variety of packages to extract relevant results into databases / analysis software packages Manage the internal test facilities (test tanks, ovens, pools, lifting equipment) Liaise with external test facilities (EMC, vibration, pools, etc) Fault finding and failure analysis Documentation and presentation of results and findings. Essential Skills: HNC or Degree in a relevant engineering discipline Competent in Electrical and Electronic Engineering Previous experience in personnel supervision / management, to coach and mentor staff and manage their workload Ability to work unsupervised to tight timescales Working knowledge of Mechanical Engineering principles Working knowledge of Software principles in relation to products - embedded and associated tool chains Competent and able to use Microsoft Office to a high level Experienced and high level competence with National Instruments LabView and TestStand software tool chains within a test and measurement environment Experienced with creating / modifying software scripts / programs e.g. Python, Visual Basic, C, C++, etc. 3 years in a test focused role, or within test equipment development Proven experience in data capture and analysis Expert in the Verification & Validation processes and associated tools and techniques Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Excellent knowledge of test equipment and platforms Data capture - logging Create high quality test reports Innovative and creative mind-set with technical awareness Excellent communicator: both written and verbal Enthusiasm, drive and personality! Desirable: Degree in Electrical and Electronic Engineering Formal qualification in Mechanical Engineering and/or Software National Instruments certified developer Experienced with working with system engineering / project management tools - EA / DOORS / etc. Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Knowledge of compliance standards and certification (CE / DNV) Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Jun 18, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Join us in creating the most innovative robotic technology for the harshest environment in the deepest oceans and most turbulent waters. We lead the world with the most advanced engineering, electronics and software systems for pioneering electric underwater technology. We don't just create products - we are revolutionising the underwater world. So come and be part of an innovative and agile team that is dedicated to smart and inspired technology that is rapidly changing the future of underwater robotics. This is a new role onsite at our Fareham Campus. Role to engineer test solutions for electro-mechanical products to ensure systems are thoroughly exercised to satisfy product requirements. With a wide ranging remit to manage and execute the full lifecycle of test engineering, from definition of test-cases through development of test tools to the execution of testing. As such it will suit someone with a broad spread of engineering knowledge, imagination and drive Key accountabilities and responsibilities: Lead Test Engineer within the department, to be the guide and support resource for the general Test Engineers Line manager for Test Engineering group - manage out workload within the Test Engineering team and external 3rd parties as required Analyse Master / Systems / Sub-System requirements and conformance specifications to derive test requirements Plan, design and communicate test cases which verify and validate requirements across a broad spread of electro-mechanical systems for both the development and production lifecycle phases Responsible for closure of workload packages derived from requirements analysis, management of formal Test Reports and other evidence based materials across the Test Engineering team to support the conclusions of investigations Define the design of test jigs, harnesses and software to allow execution of test cases including, where appropriate, automation. Implement data processing/ filtering software in a variety of packages to extract relevant results into databases / analysis software packages Manage the internal test facilities (test tanks, ovens, pools, lifting equipment) Liaise with external test facilities (EMC, vibration, pools, etc) Fault finding and failure analysis Documentation and presentation of results and findings. Essential Skills: HNC or Degree in a relevant engineering discipline Competent in Electrical and Electronic Engineering Previous experience in personnel supervision / management, to coach and mentor staff and manage their workload Ability to work unsupervised to tight timescales Working knowledge of Mechanical Engineering principles Working knowledge of Software principles in relation to products - embedded and associated tool chains Competent and able to use Microsoft Office to a high level Experienced and high level competence with National Instruments LabView and TestStand software tool chains within a test and measurement environment Experienced with creating / modifying software scripts / programs e.g. Python, Visual Basic, C, C++, etc. 3 years in a test focused role, or within test equipment development Proven experience in data capture and analysis Expert in the Verification & Validation processes and associated tools and techniques Proven experience working on multi-disciplinary systems (electrical, mechanical, software) Excellent knowledge of test equipment and platforms Data capture - logging Create high quality test reports Innovative and creative mind-set with technical awareness Excellent communicator: both written and verbal Enthusiasm, drive and personality! Desirable: Degree in Electrical and Electronic Engineering Formal qualification in Mechanical Engineering and/or Software National Instruments certified developer Experienced with working with system engineering / project management tools - EA / DOORS / etc. Experience in the offshore and/or subsea industry Knowledge of product certification, best-practice and industry standards Knowledge of compliance standards and certification (CE / DNV) Expert / advanced user of Microsoft Excel. Experience with data archiving / controlled repositories management Previous experience in a customer-facing role By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Electronics & Defense offers its customers onboard intelligence solutions allowing them to understand the environment, reduce mental load and guarantee a trajectory, even in critical situations, in all environments: on land, at sea, in the sky or space. The company harnesses the expertise of its 13,000 employees towards these three functions: observe, decide and guide, for the civil and military markets. Final Viewer Wolverhampton Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Quality team as a Final Viewer at our Wolverhampton site. About Safran Actuation Systems UK Safran Actuation Systems UK is a world class centre for the design, manufacture and support of cutting-edge actuation and flight control solutions used across commercial, military and rotary platforms. With major sites in Wolverhampton and Banbury, our teams play a critical role in delivering innovative, reliable and safe systems that keep aircraft performing at their best. Our UK Actuation business brings together engineering excellence, advanced manufacturing capability and a proud heritage within the aerospace sector. Whether supporting major global programmes or developing the next generation of actuation technologies, our people are at the heart of everything we do. As part of Safran's global network, joining Safran Actuation Systems UK means becoming part of a highly skilled, collaborative and forward thinking team with opportunities to grow, innovate and make a meaningful impact in the future of aerospace. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: -Competitive salary -Company performance bonus scheme -Pension scheme - up to 10% employer contribution -Private medical insurance -Comprehensive health cash plan -25 days annual leave + bank holidays -Flexible benefits programme (buy & sell holiday allowance, discounted gym memberships, Maternity/ adoption leave- up to 52 weeks, first 26 weeks at full pay, subsequent 26 at 50% (basic pay) and Paternity/Non-Pregnant Parent/ Co-adopter leave 4 weeks full pay) -Structured training & opportunities to progress Your Role -Ensuring all product is final viewed using the relevant drawings and specifications prior to said parts being booked into stores for use -Recording of 'turn backs' (things that stop or hinder the process) to ensure process improvements can continue -Working seamlessly within a team of Final Viewers with no conflict ensuring flow of product -Reporting into Shift Mangers / Ops Managers on status of parts progression and issues which may be affecting delivery targets / metrics -Visual and instrumental measurement on manufactured components on all batches of components which are being final viewed ensuring compliance -Process improvements where necessary -Assisting in problem resolution where necessary -Ensuring all documents are up to date and adhered to compliance But what else? (advantages, specific features, etc.) Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today. Why Safran? A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring -Lead by example per the 4 gears (People, Ideas, Integrity, Performance) -'Quality first' mindset expected at all times -Safe working to be expected at all times and treated as number one priority for oneself and all others -A drive to meet all customer expectations and department targets is required -Ability to work and deal with people at all levels in the business from all departments (eg. Quality / Manufacturing Engineering / Design / Management) to ensure the business mitigates any issues which arise and excels in surpassing all targets. -Ability to manage through systems -Comfortable around higher management and particularly able to work together in a team in the specific department -Conflict management & Customer focus -Able to use a variety of measuring equipment such as Go / No go gauges / Micrometer's / Vernier's / height gauges and additionally CMM software a bonus. - Action oriented with a drive for results -Critical thinker and strong decision maker -Ability to be a self-starter and manage work load on a day to day basis based on customer demand liaising with the shift production planners and shift managers
Jun 18, 2026
Full time
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Electronics & Defense offers its customers onboard intelligence solutions allowing them to understand the environment, reduce mental load and guarantee a trajectory, even in critical situations, in all environments: on land, at sea, in the sky or space. The company harnesses the expertise of its 13,000 employees towards these three functions: observe, decide and guide, for the civil and military markets. Final Viewer Wolverhampton Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Quality team as a Final Viewer at our Wolverhampton site. About Safran Actuation Systems UK Safran Actuation Systems UK is a world class centre for the design, manufacture and support of cutting-edge actuation and flight control solutions used across commercial, military and rotary platforms. With major sites in Wolverhampton and Banbury, our teams play a critical role in delivering innovative, reliable and safe systems that keep aircraft performing at their best. Our UK Actuation business brings together engineering excellence, advanced manufacturing capability and a proud heritage within the aerospace sector. Whether supporting major global programmes or developing the next generation of actuation technologies, our people are at the heart of everything we do. As part of Safran's global network, joining Safran Actuation Systems UK means becoming part of a highly skilled, collaborative and forward thinking team with opportunities to grow, innovate and make a meaningful impact in the future of aerospace. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: -Competitive salary -Company performance bonus scheme -Pension scheme - up to 10% employer contribution -Private medical insurance -Comprehensive health cash plan -25 days annual leave + bank holidays -Flexible benefits programme (buy & sell holiday allowance, discounted gym memberships, Maternity/ adoption leave- up to 52 weeks, first 26 weeks at full pay, subsequent 26 at 50% (basic pay) and Paternity/Non-Pregnant Parent/ Co-adopter leave 4 weeks full pay) -Structured training & opportunities to progress Your Role -Ensuring all product is final viewed using the relevant drawings and specifications prior to said parts being booked into stores for use -Recording of 'turn backs' (things that stop or hinder the process) to ensure process improvements can continue -Working seamlessly within a team of Final Viewers with no conflict ensuring flow of product -Reporting into Shift Mangers / Ops Managers on status of parts progression and issues which may be affecting delivery targets / metrics -Visual and instrumental measurement on manufactured components on all batches of components which are being final viewed ensuring compliance -Process improvements where necessary -Assisting in problem resolution where necessary -Ensuring all documents are up to date and adhered to compliance But what else? (advantages, specific features, etc.) Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today. Why Safran? A global presence: Be part of a global aerospace, defence & space business with over 100,000 Colleagues, across 300 sites in 30 countries. Inclusive & empowering environment: We celebrate our differences and believe they make us stronger. We know that a fulfilling work environment is a key driver for innovative ideas and team success. Innovation at the core: Join our mission to decarbonise aerospace and make the world a safer place. Your ambitions can take us further. Mobility & training opportunities: We can support your ambitions with training, development, a personalised career plan and mobility opportunities. If you have big dreams, we'll support you to make them a reality. A culture of excellence: Join a team that values collaboration, integrity, and continuous improvement. Whatever your background, together we aim for excellence. Get involved: We also have a number of groups and forums across our sites that you can get involved with, including Women at Safran, Diversity at Safran, Sports Clubs, STEM ambassadors, Employee Forum, Charity Partnerships and Wellbeing Programs. What You'll Bring -Lead by example per the 4 gears (People, Ideas, Integrity, Performance) -'Quality first' mindset expected at all times -Safe working to be expected at all times and treated as number one priority for oneself and all others -A drive to meet all customer expectations and department targets is required -Ability to work and deal with people at all levels in the business from all departments (eg. Quality / Manufacturing Engineering / Design / Management) to ensure the business mitigates any issues which arise and excels in surpassing all targets. -Ability to manage through systems -Comfortable around higher management and particularly able to work together in a team in the specific department -Conflict management & Customer focus -Able to use a variety of measuring equipment such as Go / No go gauges / Micrometer's / Vernier's / height gauges and additionally CMM software a bonus. - Action oriented with a drive for results -Critical thinker and strong decision maker -Ability to be a self-starter and manage work load on a day to day basis based on customer demand liaising with the shift production planners and shift managers
Lead Hardware Engineer - Electric Drive Systems Location: East of England, UK Position: Full-time, Permanent Salary: Competitive/Negotiable depending on experience Hours: 37.5 hours per week (Monday to Friday) Working Pattern: 3-4 days onsite About the Role We are looking for an experienced and motivated Lead Hardware Engineer to head up the design and delivery of electronic hardware for advanced electric drive systems. Working within an agile, medium-sized engineering team, you will take full technical ownership of hardware development from early concept right through to final production release. This role is ideal for a hands-on technical leader who understands what it takes to design robust, high-voltage systems tailored for high-volume automotive production. You will focus on creating scalable designs while keeping a keen eye on manufacturability, reliability, and cost-efficiency. Key Responsibilities Lead, mentor, and support a dedicated team of hardware engineers, organising day-to-day tasks to meet project milestones. Lead the development of power electronics and high-voltage (600V) systems, including 3-phase motor drive inverters, bi-directional DC-DC converters, control electronics, and AC mains battery chargers. Drive best practices for Design for Manufacture (DFM) and Design for Cost (DFC) to ensure smooth, high-volume production. Collaborate closely with Project Managers to plan hardware activities, evaluate technical risks, and manage budgets. Oversee Failure Mode and Effects Analysis (FMEA) and support Design Verification Plans (DVP) to guarantee compliance with reliability, safety, and electromagnetic compatibility (EMC) standards. Work alongside software, mechanical, and system integration teams to resolve technical challenges and ensure smooth system-level performance. What We Are Looking For Experience leading or mentoring multidisciplinary engineering teams, managing project schedules, and handling risk assessments. Strong background in the schematic design and architecture of complex 600V power electronic hardware systems. A solid understanding of the automotive product development life cycle, especially regarding supply chain factors, component selection, and production scalability. Practical experience defining test strategies, debugging hardware issues, and navigating certification processes (EMC, environmental, and safety regulations). The ability to work collaboratively across engineering disciplines and engage effectively with suppliers. What We Offer We offer a supportive, modern working environment alongside a competitive benefits package, including: Workplace pension (4% employee/5% employer contribution) and a discretionary employee share scheme. Employee Assistance Programme and Group Life Insurance. 25 days of annual leave plus all bank holidays. Free parking, corporate clothing, and complimentary drinks and snacks. How to Apply If you are looking to take the next step in your career and shape the future of electric vehicle technology, please submit your CV along with your salary expectations. Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 17, 2026
Full time
Lead Hardware Engineer - Electric Drive Systems Location: East of England, UK Position: Full-time, Permanent Salary: Competitive/Negotiable depending on experience Hours: 37.5 hours per week (Monday to Friday) Working Pattern: 3-4 days onsite About the Role We are looking for an experienced and motivated Lead Hardware Engineer to head up the design and delivery of electronic hardware for advanced electric drive systems. Working within an agile, medium-sized engineering team, you will take full technical ownership of hardware development from early concept right through to final production release. This role is ideal for a hands-on technical leader who understands what it takes to design robust, high-voltage systems tailored for high-volume automotive production. You will focus on creating scalable designs while keeping a keen eye on manufacturability, reliability, and cost-efficiency. Key Responsibilities Lead, mentor, and support a dedicated team of hardware engineers, organising day-to-day tasks to meet project milestones. Lead the development of power electronics and high-voltage (600V) systems, including 3-phase motor drive inverters, bi-directional DC-DC converters, control electronics, and AC mains battery chargers. Drive best practices for Design for Manufacture (DFM) and Design for Cost (DFC) to ensure smooth, high-volume production. Collaborate closely with Project Managers to plan hardware activities, evaluate technical risks, and manage budgets. Oversee Failure Mode and Effects Analysis (FMEA) and support Design Verification Plans (DVP) to guarantee compliance with reliability, safety, and electromagnetic compatibility (EMC) standards. Work alongside software, mechanical, and system integration teams to resolve technical challenges and ensure smooth system-level performance. What We Are Looking For Experience leading or mentoring multidisciplinary engineering teams, managing project schedules, and handling risk assessments. Strong background in the schematic design and architecture of complex 600V power electronic hardware systems. A solid understanding of the automotive product development life cycle, especially regarding supply chain factors, component selection, and production scalability. Practical experience defining test strategies, debugging hardware issues, and navigating certification processes (EMC, environmental, and safety regulations). The ability to work collaboratively across engineering disciplines and engage effectively with suppliers. What We Offer We offer a supportive, modern working environment alongside a competitive benefits package, including: Workplace pension (4% employee/5% employer contribution) and a discretionary employee share scheme. Employee Assistance Programme and Group Life Insurance. 25 days of annual leave plus all bank holidays. Free parking, corporate clothing, and complimentary drinks and snacks. How to Apply If you are looking to take the next step in your career and shape the future of electric vehicle technology, please submit your CV along with your salary expectations. Randstad Technologies Ltd is a leading specialist recruitment business for the IT & Engineering industries. Please note that due to a high level of applications, we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Lead Hardware Engineer - Norwich - 85k Location: Norwich - Hybrid Salary: 85k+ Benefits My client is an innovative engineering organisation developing next-generation electric drive technologies. Due to continued growth, they are seeking an experienced Lead Hardware Engineer to take technical ownership of hardware development activities and lead the delivery of advanced power electronic systems for high-volume production applications. The Role As Lead Hardware Engineer, you will be responsible for leading the design, development and validation of complex automotive hardware systems, ensuring solutions are delivered on time, within budget and to the highest quality standards. Key responsibilities include: Leading the design and development of advanced power electronic hardware systems for electric drive applications Defining system architectures and ensuring designs are robust, scalable and suitable for high-volume manufacture Taking ownership of hardware delivery throughout the full product lifecycle Managing and mentoring a team of hardware engineers, providing technical guidance and support Planning hardware development activities alongside project managers to achieve key milestones Driving Design for Manufacture (DFM), Design for Cost (DFC) and value engineering initiatives Leading component selection, supplier engagement and technology development activities Managing cost reduction programmes through design optimisation and platform reuse strategies Conducting hardware FMEA activities and managing technical risk mitigation Supporting Design Validation Plans (DVP) and overseeing hardware verification and validation activities Collaborating with software, systems, mechanical, manufacturing and test teams to ensure successful product integration Promoting engineering best practice, documentation standards and continuous improvement initiatives Requirements: Proven experience leading hardware development projects within an automotive or related engineering environment Strong background in power electronics and high-voltage system design Experience developing production-ready hardware solutions for high-volume manufacturing Demonstrable leadership experience, including mentoring and managing engineering teams Strong understanding of system architecture, schematic design and component selection Experience managing project schedules, technical risks and engineering deliverables Excellent problem-solving, communication and stakeholder management skills Ability to drive projects from concept through validation and production release If you're interested, please apply below
Jun 16, 2026
Full time
Lead Hardware Engineer - Norwich - 85k Location: Norwich - Hybrid Salary: 85k+ Benefits My client is an innovative engineering organisation developing next-generation electric drive technologies. Due to continued growth, they are seeking an experienced Lead Hardware Engineer to take technical ownership of hardware development activities and lead the delivery of advanced power electronic systems for high-volume production applications. The Role As Lead Hardware Engineer, you will be responsible for leading the design, development and validation of complex automotive hardware systems, ensuring solutions are delivered on time, within budget and to the highest quality standards. Key responsibilities include: Leading the design and development of advanced power electronic hardware systems for electric drive applications Defining system architectures and ensuring designs are robust, scalable and suitable for high-volume manufacture Taking ownership of hardware delivery throughout the full product lifecycle Managing and mentoring a team of hardware engineers, providing technical guidance and support Planning hardware development activities alongside project managers to achieve key milestones Driving Design for Manufacture (DFM), Design for Cost (DFC) and value engineering initiatives Leading component selection, supplier engagement and technology development activities Managing cost reduction programmes through design optimisation and platform reuse strategies Conducting hardware FMEA activities and managing technical risk mitigation Supporting Design Validation Plans (DVP) and overseeing hardware verification and validation activities Collaborating with software, systems, mechanical, manufacturing and test teams to ensure successful product integration Promoting engineering best practice, documentation standards and continuous improvement initiatives Requirements: Proven experience leading hardware development projects within an automotive or related engineering environment Strong background in power electronics and high-voltage system design Experience developing production-ready hardware solutions for high-volume manufacturing Demonstrable leadership experience, including mentoring and managing engineering teams Strong understanding of system architecture, schematic design and component selection Experience managing project schedules, technical risks and engineering deliverables Excellent problem-solving, communication and stakeholder management skills Ability to drive projects from concept through validation and production release If you're interested, please apply below
Electronics & Software Design Manager South Wales - M4 Corridor £70,000 - £85,000 Yolk Recruitment is managing a new opportunity for an Electronics Design Manager to join a growing advanced technology business with a strong record of developing, manufacturing and launching complex electronic products into global markets. This is a future proof business, the creator of a technology that defines a sector and that continues to invest in advancing their competitive lead, in new product development, manufacturing capability and future technologies. This is a leadership role for someone who can get the best out of an experienced electronics and embedded firmware team, keep projects moving, improve how work is planned and delivered, and still support technical decision making when problems need support to resolve. You'll be leading teams of electronics and embedded firmware engineers, supporting new product development, existing product improvement, regulatory readiness and transfer into manufacture, in an environment that welcomes new ideas. This is what you'll be doing as Electronics Design Manager You'll take responsibility for the day-to-day leadership and development of a mixed electronics and embedded firmware team, giving engineers the structure, support and challenge needed to deliver high quality work. You'll lead, coach and develop, driving project delivery across NPD, NPI, sustaining engineering, obsolescence and cost reduction activity. You'll help engineers work through technical problems by asking the right questions and organising a clear route to resolution, not expected to simply take on the problems yourself. You'll work closely with internal teams across development, manufacturing, quality, regulatory, compliance and project delivery, while also supporting supplier and contract manufacturer communication The experience you'll bring to the team A background in electronics, hardware, embedded systems, firmware or a closely related discipline Experience leading, managing or mentoring engineers in product development and electronics, hardware, embedded software or firmware. The role would suit someone who has worked in a regulated, safety-critical or highly controlled product development environment, although the most important thing is an understanding of why process, documentation, traceability and controlled delivery matter. And this is what you'll get in return Attractive salary DOE Annual salary review 10% combined company pension Flexible start/finish around core hours 25 days holiday + bank holidays Company bonus Ongoing training and development Career development opportunities Are you up to the challenge? If you're an Electronics Design Manager, Electronics Manager, Hardware Manager, Embedded Systems Manager or technical leader looking for a role where you can stay close to the engineering detail while developing a team and improving delivery, apply now.
Jun 16, 2026
Full time
Electronics & Software Design Manager South Wales - M4 Corridor £70,000 - £85,000 Yolk Recruitment is managing a new opportunity for an Electronics Design Manager to join a growing advanced technology business with a strong record of developing, manufacturing and launching complex electronic products into global markets. This is a future proof business, the creator of a technology that defines a sector and that continues to invest in advancing their competitive lead, in new product development, manufacturing capability and future technologies. This is a leadership role for someone who can get the best out of an experienced electronics and embedded firmware team, keep projects moving, improve how work is planned and delivered, and still support technical decision making when problems need support to resolve. You'll be leading teams of electronics and embedded firmware engineers, supporting new product development, existing product improvement, regulatory readiness and transfer into manufacture, in an environment that welcomes new ideas. This is what you'll be doing as Electronics Design Manager You'll take responsibility for the day-to-day leadership and development of a mixed electronics and embedded firmware team, giving engineers the structure, support and challenge needed to deliver high quality work. You'll lead, coach and develop, driving project delivery across NPD, NPI, sustaining engineering, obsolescence and cost reduction activity. You'll help engineers work through technical problems by asking the right questions and organising a clear route to resolution, not expected to simply take on the problems yourself. You'll work closely with internal teams across development, manufacturing, quality, regulatory, compliance and project delivery, while also supporting supplier and contract manufacturer communication The experience you'll bring to the team A background in electronics, hardware, embedded systems, firmware or a closely related discipline Experience leading, managing or mentoring engineers in product development and electronics, hardware, embedded software or firmware. The role would suit someone who has worked in a regulated, safety-critical or highly controlled product development environment, although the most important thing is an understanding of why process, documentation, traceability and controlled delivery matter. And this is what you'll get in return Attractive salary DOE Annual salary review 10% combined company pension Flexible start/finish around core hours 25 days holiday + bank holidays Company bonus Ongoing training and development Career development opportunities Are you up to the challenge? If you're an Electronics Design Manager, Electronics Manager, Hardware Manager, Embedded Systems Manager or technical leader looking for a role where you can stay close to the engineering detail while developing a team and improving delivery, apply now.
Role: Senior Product Test Technician Location: Waterbeach Salary: 45,000 - 55,000 Per Annum - Depending on experience Proactive are currently in search of a Senior Product Test Technician to begin work for a world leading manufacturing company based in Waterbeach. You will be required to carry out testing on company products as part of the new product development cycle within Research and Development (R&D). The primary aim of the Product Test team is to verify that new products meets the specification and is fit for release. The role may include providing hands-on support during product development. Purpose of Role: The Senior Engineer - Product Test will carry out testing on company technology as part of the new product development cycle within Research and Development (R&D). The primary aim of the Product Test team is to verify that a new product meets the project specification and is fit for release to market. Other activity within the role may include providing hands-on support during product development or supporting customers where required. The Senior Engineer - Product Test will be expected to act as the Test Lead within new product development (NPD) projects, owning and delivering the test work package. The person will create test plans from project specifications and design experiments to validate or verify a new technology. They will then be expected to lead the execution of this work in the laboratory and be responsible for a high-quality output. The role will also involve processing data and writing final reports to conclude the test activity. This position is expected to be predominately laboratory based and will require a hands-on skill set alongside an organised mentality and a positive driven outlook. The successful applicant will develop a strong understanding of company technology and will be part of a growing and exciting R&D team with many opportunities for development. The successful applicant will develop a strong understanding of company technology and will be part of a growing and exciting R&D team with many opportunities for development. Key Accountabilities: Responsible for the design, execution and reporting of Product Test work packages within NPD projects. Lead experimental activity within projects and become a technical leader within the laboratory setting. Set a high standard within the laboratory for tidiness, organisation and technical output. Provide detailed feedback within project meetings, identifying next steps and being accountable for work achieved and actions. Recording and processing raw data to create concise final reports to conclude test activity. Operate printing equipment and software, such as stage or roll-to-roll tools. Set-up, operate and clean ink delivery systems and print heads. Lead fault finding activity to identify issues and create solutions. Own equipment or processes within R&D including writing documentation, such as standard operating. procedures (SOP) or risk assessments (RA). Lead initiatives to improve Product Test capability. Contribute to maintaining a high-quality laboratory environment through 5S activities. Adherence to H&S standards at all times. Key Challenges: Developing a core understanding of the fundamental operating principals of company products, drive electronics, ink systems and best printing practices. Be able to work successfully in a dynamic research and development environment where priorities may change quickly. Generating high quality output, including documentation, that is understandable and repeatable. Creating an environment to match the desired culture - professional, energetic, innovative, vibrant. Person Specification: Minimum bachelor's degree in a STEM or life sciences subject (Engineering, Physics, Maths, Chemistry). Minimum 6 years' experience of working in a laboratory or engineering environment, ideally within an R&D function. Ability to investigate and analyse complex systems in a methodical way. Able to debug a system from the printhead through to a printing application as required. A hands-on mentality with a willingness to learn new techniques or skills. Confident communicator, able to adjust their style when explaining complex technical issues to peers, managers, customers etc. Methodical approach, demonstrating attention to detail. Effective team worker - able to build good relationships with the wider R&D team. Ability to manage multiple demands and manage time effectively. Experience of: Leading activity within new product development or research projects Proven lab experience within an engineering setting Experience of working successfully within R&D or engineering projects Familiarity with engineering best practises, such as failure mode effect analysis (FMEA) and/or Fault Tree Analysis (FTA) Experience of working within the digital print industry (preferred but not essential How to Apply: Please contact Jemal on (phone number removed) or (url removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 09, 2025
Full time
Role: Senior Product Test Technician Location: Waterbeach Salary: 45,000 - 55,000 Per Annum - Depending on experience Proactive are currently in search of a Senior Product Test Technician to begin work for a world leading manufacturing company based in Waterbeach. You will be required to carry out testing on company products as part of the new product development cycle within Research and Development (R&D). The primary aim of the Product Test team is to verify that new products meets the specification and is fit for release. The role may include providing hands-on support during product development. Purpose of Role: The Senior Engineer - Product Test will carry out testing on company technology as part of the new product development cycle within Research and Development (R&D). The primary aim of the Product Test team is to verify that a new product meets the project specification and is fit for release to market. Other activity within the role may include providing hands-on support during product development or supporting customers where required. The Senior Engineer - Product Test will be expected to act as the Test Lead within new product development (NPD) projects, owning and delivering the test work package. The person will create test plans from project specifications and design experiments to validate or verify a new technology. They will then be expected to lead the execution of this work in the laboratory and be responsible for a high-quality output. The role will also involve processing data and writing final reports to conclude the test activity. This position is expected to be predominately laboratory based and will require a hands-on skill set alongside an organised mentality and a positive driven outlook. The successful applicant will develop a strong understanding of company technology and will be part of a growing and exciting R&D team with many opportunities for development. The successful applicant will develop a strong understanding of company technology and will be part of a growing and exciting R&D team with many opportunities for development. Key Accountabilities: Responsible for the design, execution and reporting of Product Test work packages within NPD projects. Lead experimental activity within projects and become a technical leader within the laboratory setting. Set a high standard within the laboratory for tidiness, organisation and technical output. Provide detailed feedback within project meetings, identifying next steps and being accountable for work achieved and actions. Recording and processing raw data to create concise final reports to conclude test activity. Operate printing equipment and software, such as stage or roll-to-roll tools. Set-up, operate and clean ink delivery systems and print heads. Lead fault finding activity to identify issues and create solutions. Own equipment or processes within R&D including writing documentation, such as standard operating. procedures (SOP) or risk assessments (RA). Lead initiatives to improve Product Test capability. Contribute to maintaining a high-quality laboratory environment through 5S activities. Adherence to H&S standards at all times. Key Challenges: Developing a core understanding of the fundamental operating principals of company products, drive electronics, ink systems and best printing practices. Be able to work successfully in a dynamic research and development environment where priorities may change quickly. Generating high quality output, including documentation, that is understandable and repeatable. Creating an environment to match the desired culture - professional, energetic, innovative, vibrant. Person Specification: Minimum bachelor's degree in a STEM or life sciences subject (Engineering, Physics, Maths, Chemistry). Minimum 6 years' experience of working in a laboratory or engineering environment, ideally within an R&D function. Ability to investigate and analyse complex systems in a methodical way. Able to debug a system from the printhead through to a printing application as required. A hands-on mentality with a willingness to learn new techniques or skills. Confident communicator, able to adjust their style when explaining complex technical issues to peers, managers, customers etc. Methodical approach, demonstrating attention to detail. Effective team worker - able to build good relationships with the wider R&D team. Ability to manage multiple demands and manage time effectively. Experience of: Leading activity within new product development or research projects Proven lab experience within an engineering setting Experience of working successfully within R&D or engineering projects Familiarity with engineering best practises, such as failure mode effect analysis (FMEA) and/or Fault Tree Analysis (FTA) Experience of working within the digital print industry (preferred but not essential How to Apply: Please contact Jemal on (phone number removed) or (url removed) Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
This is a unique opportunity for an experienced Electronic Architect to join MBDA and contribute to the development of our world-class, precision product range. As part of the Electronic Engineering function, you will have the chance to actively participate in research and development activities, shaping future strategies and roadmaps for our Electronic Products and solutions! Job Title: Electronic Architect Salary: Circa £70,000 depending on experience Location: Stevenage (we may be able to offer a relocation package for this role) Dynamic (hybrid) working: We trust our people to agree, within their teams, where and when they can be most effective. Our Dynamic Working policy allows individuals flexibility around the hours they work and where they work. This role could be full time or part time in order to meet your needs. We are flexible and accommodating. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Your role will involve defining the electronic and electrical architecture of the equipment, conducting analysis and decomposition to lower-level requirements for sub-elements, and ensuring that challenging customer requirements are met within the constraints of limited physical space and harsh operating environments. Working closely with the Engineering Project Manager, you will be responsible for managing all technical elements of Electronic Equipment's to ensure impeccable 'On Time, On Cost, On Quality' delivery of the technical solution. Effective communication skills are vital as you will frequently engage with both stakeholders and customers. It is also important to possess strong influencing skills, leadership qualities, and a comprehensive understanding of customers' requirements. Having drive, proactivity, and the ability to make decisions and adjust in a constantly evolving and ambitious setting are essential for excelling in this position. What we're looking for from you: Ideally educated to degree level (or equivalent) with an Electronics bias and significant experience in the following areas: Digital electronics and microprocessor systems Power electronics for distributed power networks Design of equipment for safety critical environments Design of equipment for handling sensitive customer data Understanding of software and firmware development techniques Compact packaging and thermal management techniques for complex high-performance electronic equipment Knowledge of internal computing design covering System on Chip technologies, RF, Signal Processing, and Software Defined Radio would be beneficial. As would, experience in EMC and Environmental design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Oct 08, 2025
Full time
This is a unique opportunity for an experienced Electronic Architect to join MBDA and contribute to the development of our world-class, precision product range. As part of the Electronic Engineering function, you will have the chance to actively participate in research and development activities, shaping future strategies and roadmaps for our Electronic Products and solutions! Job Title: Electronic Architect Salary: Circa £70,000 depending on experience Location: Stevenage (we may be able to offer a relocation package for this role) Dynamic (hybrid) working: We trust our people to agree, within their teams, where and when they can be most effective. Our Dynamic Working policy allows individuals flexibility around the hours they work and where they work. This role could be full time or part time in order to meet your needs. We are flexible and accommodating. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: Your role will involve defining the electronic and electrical architecture of the equipment, conducting analysis and decomposition to lower-level requirements for sub-elements, and ensuring that challenging customer requirements are met within the constraints of limited physical space and harsh operating environments. Working closely with the Engineering Project Manager, you will be responsible for managing all technical elements of Electronic Equipment's to ensure impeccable 'On Time, On Cost, On Quality' delivery of the technical solution. Effective communication skills are vital as you will frequently engage with both stakeholders and customers. It is also important to possess strong influencing skills, leadership qualities, and a comprehensive understanding of customers' requirements. Having drive, proactivity, and the ability to make decisions and adjust in a constantly evolving and ambitious setting are essential for excelling in this position. What we're looking for from you: Ideally educated to degree level (or equivalent) with an Electronics bias and significant experience in the following areas: Digital electronics and microprocessor systems Power electronics for distributed power networks Design of equipment for safety critical environments Design of equipment for handling sensitive customer data Understanding of software and firmware development techniques Compact packaging and thermal management techniques for complex high-performance electronic equipment Knowledge of internal computing design covering System on Chip technologies, RF, Signal Processing, and Software Defined Radio would be beneficial. As would, experience in EMC and Environmental design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
