Mechanical Supervisor Leeds 12 Month Contract 1st Step Solutions are supporting a leading M&E Contractor who are looking for a Mechanical Supervisor to join their team in Leeds, supporting them on a new residential project. We are seeking Supervisors who have prior long term experience working directly for Tier 1 M&E Contractors with residential experience. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - Good literacy skills. - Previous experience in a Supervisory/Management role - Previous experience of working on commercial projects.
Jun 24, 2026
Contractor
Mechanical Supervisor Leeds 12 Month Contract 1st Step Solutions are supporting a leading M&E Contractor who are looking for a Mechanical Supervisor to join their team in Leeds, supporting them on a new residential project. We are seeking Supervisors who have prior long term experience working directly for Tier 1 M&E Contractors with residential experience. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - Good literacy skills. - Previous experience in a Supervisory/Management role - Previous experience of working on commercial projects.
Stores & Workshop Supervisor Full Time Permanent We are looking for a hands-on Stores & Workshop Supervisor to join a busy engineering and distribution operation. This is a varied role combining warehouse, workshop and customer-facing responsibilities, making it ideal for someone who enjoys leading by example and working across multiple areas of the business. Reporting to the Branch Manager, you will oversee the day-to-day running of stores and workshop activities while supporting trade counter operations and supervising a small team. Key Responsibilities Stores Operations Oversee and support customer order picking and packing activities. Manage goods-in processes, including checking and inspecting deliveries. Assist with stock control and stocktaking activities. Maintain accurate records and update internal systems and documentation. Workshop Operations Assemble products for hydraulic, pneumatic and industrial applications using a range of manual and mechanical methods. Ensure all work is completed in line with company procedures and industry standards. Complete and maintain accurate workshop documentation. Promote a safe and organised working environment by maintaining high housekeeping standards. Monitor stock levels of workshop-related items and report replenishment requirements. Customer & Trade Counter Support Provide excellent customer service at the trade counter. Process customer orders and associated paperwork accurately. Handle cash and card payments where required. Support the day-to-day supervision of two team members. About You To be successful in this role, you will have: Previous experience within a stores, warehouse, workshop or engineering environment. A practical understanding of engineering products or processes. Strong organisational skills and attention to detail. The ability to remain calm and focused when working under pressure. Good communication skills and the ability to build positive relationships with customers and colleagues. Basic IT skills and confidence using computer systems. Experience supervising or supporting team members would be advantageous. Apply now! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Jun 24, 2026
Full time
Stores & Workshop Supervisor Full Time Permanent We are looking for a hands-on Stores & Workshop Supervisor to join a busy engineering and distribution operation. This is a varied role combining warehouse, workshop and customer-facing responsibilities, making it ideal for someone who enjoys leading by example and working across multiple areas of the business. Reporting to the Branch Manager, you will oversee the day-to-day running of stores and workshop activities while supporting trade counter operations and supervising a small team. Key Responsibilities Stores Operations Oversee and support customer order picking and packing activities. Manage goods-in processes, including checking and inspecting deliveries. Assist with stock control and stocktaking activities. Maintain accurate records and update internal systems and documentation. Workshop Operations Assemble products for hydraulic, pneumatic and industrial applications using a range of manual and mechanical methods. Ensure all work is completed in line with company procedures and industry standards. Complete and maintain accurate workshop documentation. Promote a safe and organised working environment by maintaining high housekeeping standards. Monitor stock levels of workshop-related items and report replenishment requirements. Customer & Trade Counter Support Provide excellent customer service at the trade counter. Process customer orders and associated paperwork accurately. Handle cash and card payments where required. Support the day-to-day supervision of two team members. About You To be successful in this role, you will have: Previous experience within a stores, warehouse, workshop or engineering environment. A practical understanding of engineering products or processes. Strong organisational skills and attention to detail. The ability to remain calm and focused when working under pressure. Good communication skills and the ability to build positive relationships with customers and colleagues. Basic IT skills and confidence using computer systems. Experience supervising or supporting team members would be advantageous. Apply now! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Small Works Project Manager Package Up to £75,000 basic Car allowance 25 days holiday + Birthday + bank holidays Medical Insurance 8:30am 5:30pm The Opportunity You ll take full ownership of an Small Works Division with a loyal, repeat client base and consistent workflow. This isn t a desk-based coordination role. You ll lead, grow and shape the division. You ll lead a small team delivering commercial heating, plumbing and air conditioning works Project values typically range from £10k £250k, A strong proportion of the workload centres around HVAC Systems, and works are located a long the M4 Corridor. The brief from the Directors is clear: maintain standards, protect margin and drive growth. Expand services. Strengthen relationships. Win new business. Who This Suits A Mechanical Supervisor ready to step into Project/Contracts Management and take on commercial responsibility. An experienced Small Works / PPM Mechanical Project Manager who wants autonomy and the opportunity to grow a division with profit share available for someone who can increase turnover. The business is a privately owned Mechanical Building Services contractor with over 13 years of trading history and £12m annual turnover, delivering survey, design, installation and maintenance services.
Jun 24, 2026
Full time
Small Works Project Manager Package Up to £75,000 basic Car allowance 25 days holiday + Birthday + bank holidays Medical Insurance 8:30am 5:30pm The Opportunity You ll take full ownership of an Small Works Division with a loyal, repeat client base and consistent workflow. This isn t a desk-based coordination role. You ll lead, grow and shape the division. You ll lead a small team delivering commercial heating, plumbing and air conditioning works Project values typically range from £10k £250k, A strong proportion of the workload centres around HVAC Systems, and works are located a long the M4 Corridor. The brief from the Directors is clear: maintain standards, protect margin and drive growth. Expand services. Strengthen relationships. Win new business. Who This Suits A Mechanical Supervisor ready to step into Project/Contracts Management and take on commercial responsibility. An experienced Small Works / PPM Mechanical Project Manager who wants autonomy and the opportunity to grow a division with profit share available for someone who can increase turnover. The business is a privately owned Mechanical Building Services contractor with over 13 years of trading history and £12m annual turnover, delivering survey, design, installation and maintenance services.
Location: Thatcham Starting Salary: £16.71 Shift Pattern: Rotational weekly shift pattern, including nights Key Duties & Responsibilities Operate production machinery as part of a team Work safely at all times, following Health & Safety at Work regulations to protect both personal safety and that of colleagues.Help maximise site performance by reducing waste, minimising machine downtime, and ensuring efficient production flow.Maintain excellent housekeeping standards on the production floor to support productivity, safety, and operational efficiency.Support and participate in cross-functional and continuous improvement projects to enhance processes and equipment performance.Communicate effectively with Shift Supervisors and Managers as required, ensuring smooth workflow and issue escalation.Achieve on-time delivery targets by maintaining consistent output and quality levels.Take responsibility for personal development through on-the-job training and other learning opportunities provided by the company. Essential Skills & Experience Previous experience working within a manufacturing or production environment, with the flexibility to work across all rotating shifts. Strong problem-solving skills, with the ability to navigate and resolve technical or mechanical issues.Demonstrated success in a fast-paced, target-driven, high-technology production setting. Personal Attributes Self-motivated, ambitious, and resilient, with a strong team-focused mindset.Clear and confident communicator who works well with others and contributes positively to the wider team.Willingness to learn, upskill, and adapt within a fast-moving, quality-driven production environment.Would you be interested in this role?
Jun 24, 2026
Seasonal
Location: Thatcham Starting Salary: £16.71 Shift Pattern: Rotational weekly shift pattern, including nights Key Duties & Responsibilities Operate production machinery as part of a team Work safely at all times, following Health & Safety at Work regulations to protect both personal safety and that of colleagues.Help maximise site performance by reducing waste, minimising machine downtime, and ensuring efficient production flow.Maintain excellent housekeeping standards on the production floor to support productivity, safety, and operational efficiency.Support and participate in cross-functional and continuous improvement projects to enhance processes and equipment performance.Communicate effectively with Shift Supervisors and Managers as required, ensuring smooth workflow and issue escalation.Achieve on-time delivery targets by maintaining consistent output and quality levels.Take responsibility for personal development through on-the-job training and other learning opportunities provided by the company. Essential Skills & Experience Previous experience working within a manufacturing or production environment, with the flexibility to work across all rotating shifts. Strong problem-solving skills, with the ability to navigate and resolve technical or mechanical issues.Demonstrated success in a fast-paced, target-driven, high-technology production setting. Personal Attributes Self-motivated, ambitious, and resilient, with a strong team-focused mindset.Clear and confident communicator who works well with others and contributes positively to the wider team.Willingness to learn, upskill, and adapt within a fast-moving, quality-driven production environment.Would you be interested in this role?
Air Personnel are looking for two B1.3 Licence engineers to join their client in Oxfordshire. Description/Overall purpose of the Job Based in Kidlington, Oxford, B1.3 Licensed Engineer s carry out the certification of maintenance and repair on Airbus rotorcraft AS350, AS355 Series, AS365, EC120, EC130, EC135, EC145 and EC155. Main responsibilities Accomplishment of Maintenance inspections and repairs as directed by Maintenance Supervisors. This is a certifying role that requires a Part 66 License in B1.3 (Turbine Rotorcraft). The ability to work as a team leader and to high standards to ensure continued safe operation of the aircraft. Working knowledge of UK CAA regulations most importantly Part 145, Part M and UK ANO requirements is essential. Completion of maintenance, including airframe structure, power plant and mechanical and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of maintenance fitters and the certification of their work. Also required to assist in day to day running of Hangar, including aircraft movement and general housekeeping responsibilities. Knowledge and Skills Essential Thorough knowledge of engine and airframe systems and specialised test equipment. Ability to work as part of a team and on own initiative Flexible to the requirements of the company and needs of the customer Education, Qualifications or Training Essential Part 66 B1.3 Licence Candidates without a licence but with extensive aircraft maintenance experience that are in the process of studying for a licence will also be considered Desirable 5 Years experience in a rotary environment. Type training on specific types will be given to a suitable candidate. About you It is essential to have the ability to relate readily to potential customers and to be highly persuasive in advocating the advantages our products. A fundamental requirement to be successful in this role is the ability to listen to customers, identifying and understanding their problems with a view to formulating and driving sustainable solutions Well-developed interpersonal skills, and an excellent communicator at all levels. Highly presentable at all times, and ability to maintain professional Flexibility to react positively to customer requirements efficiently. Additional requirements Due to the nature of this position you will require DBS Security Clearance and be eligible for SC clearance. Applicants must meet any/all requirements of ITAR and Export Compliance Regulations. Position based at Oxford Airport, UK. Travel within the UK or abroad to support related business requirements (not extensive). Different shift patterns available The client offers fantastic career progression, salary, success bonus and fantastic benefits. Please call Michelle for further details or send your CV - closing date is the 19th October.
Jun 24, 2026
Full time
Air Personnel are looking for two B1.3 Licence engineers to join their client in Oxfordshire. Description/Overall purpose of the Job Based in Kidlington, Oxford, B1.3 Licensed Engineer s carry out the certification of maintenance and repair on Airbus rotorcraft AS350, AS355 Series, AS365, EC120, EC130, EC135, EC145 and EC155. Main responsibilities Accomplishment of Maintenance inspections and repairs as directed by Maintenance Supervisors. This is a certifying role that requires a Part 66 License in B1.3 (Turbine Rotorcraft). The ability to work as a team leader and to high standards to ensure continued safe operation of the aircraft. Working knowledge of UK CAA regulations most importantly Part 145, Part M and UK ANO requirements is essential. Completion of maintenance, including airframe structure, power plant and mechanical and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of maintenance fitters and the certification of their work. Also required to assist in day to day running of Hangar, including aircraft movement and general housekeeping responsibilities. Knowledge and Skills Essential Thorough knowledge of engine and airframe systems and specialised test equipment. Ability to work as part of a team and on own initiative Flexible to the requirements of the company and needs of the customer Education, Qualifications or Training Essential Part 66 B1.3 Licence Candidates without a licence but with extensive aircraft maintenance experience that are in the process of studying for a licence will also be considered Desirable 5 Years experience in a rotary environment. Type training on specific types will be given to a suitable candidate. About you It is essential to have the ability to relate readily to potential customers and to be highly persuasive in advocating the advantages our products. A fundamental requirement to be successful in this role is the ability to listen to customers, identifying and understanding their problems with a view to formulating and driving sustainable solutions Well-developed interpersonal skills, and an excellent communicator at all levels. Highly presentable at all times, and ability to maintain professional Flexibility to react positively to customer requirements efficiently. Additional requirements Due to the nature of this position you will require DBS Security Clearance and be eligible for SC clearance. Applicants must meet any/all requirements of ITAR and Export Compliance Regulations. Position based at Oxford Airport, UK. Travel within the UK or abroad to support related business requirements (not extensive). Different shift patterns available The client offers fantastic career progression, salary, success bonus and fantastic benefits. Please call Michelle for further details or send your CV - closing date is the 19th October.
OLG Recruitment are currently looking for a Mechanical Piping Field Supervisor to work for a client based in Immingham, this is a contract role for an initial period of 8 months. After this time, we will reassess the role and the requirement. This will be full time hours, Monday to Friday, determined inside IR35. Basic Function Accountable in the field for providing discipline leadership, ensuring c click apply for full job details
Jun 24, 2026
Contractor
OLG Recruitment are currently looking for a Mechanical Piping Field Supervisor to work for a client based in Immingham, this is a contract role for an initial period of 8 months. After this time, we will reassess the role and the requirement. This will be full time hours, Monday to Friday, determined inside IR35. Basic Function Accountable in the field for providing discipline leadership, ensuring c click apply for full job details
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
Jun 24, 2026
Contractor
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for an Apache Armament Technician to join our team. The role Based in Ali Al Salem, Kuwait you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Armament Technician, working in an exciting environment. Knowledge and Skills Required To perform this job successfully, an individual must be able to fulfil each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contracts. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Sourced accommodation. Paid holiday entitlement + bank holidays. Living quarter allowance. Sign on bonus. Annual completion bonus. All tools will be included in this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. Please note, the deployment package varies from role to role and will depend on your current circumstances.
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Sheet Metal Mechanics/Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Sheet Metal Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have experience working on rotary aircraft/helicopters Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Annual Sign-On and Completion Bonus. Potential to earn more with overtime and TDY Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Jun 24, 2026
Full time
M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We are currently looking for Sheet Metal Mechanics/Technicians to join our team The role Based in Illesheim, Germany you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as an Sheet Metal Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfil each of the following essential duties: You must have experience working on rotary aircraft/helicopters Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometres, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritise workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment package and additional benefits We are more than happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : 12 month rolling contract. 48-hour working week Monday-Friday. Weekly pay is extremely competitive. Annual Sign-On and Completion Bonus. Potential to earn more with overtime and TDY Assistance with sourcing accommodation. Holiday entitlement. All tools will be included on this contract. This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time Do you know someone who would be suitable for this role? We offer a referral fee of £250 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract.
Workshop Supervisor Location: North West Salary: £50,000 £60,000 + 10% Bonus + Overtime + 33 Days Holiday Are you an experienced Mechanical Supervisor ready to step up into a Service Manager role? Do you have strong expertise in gearboxes, motors, engines, pumps, and drive chain componentsand enjoy leading from the front? This is an excellent opportunity to join a highly respected engineering business, click apply for full job details
Jun 23, 2026
Full time
Workshop Supervisor Location: North West Salary: £50,000 £60,000 + 10% Bonus + Overtime + 33 Days Holiday Are you an experienced Mechanical Supervisor ready to step up into a Service Manager role? Do you have strong expertise in gearboxes, motors, engines, pumps, and drive chain componentsand enjoy leading from the front? This is an excellent opportunity to join a highly respected engineering business, click apply for full job details
Company description: Location: Bedfordshire, England, United Kingdom Job ID: 82994 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Job description: We are recruiting for a Lift Installation Engineer to cover the Bedfordshire area. The successful candidate will be responsible for delivering high quality installation work and completing handovers to the required standards. What you'll be doing: Installing lift/escalator Well and Ancillary Equipment in accordance with approved procedures by selecting appropriate tools and equipment based on the operations to be performed and the equipment to be installed Installing Traction Equipment in accordance with approved procedures by selecting appropriate tools and equipment. Installation will require the siting, assembly, fitting, alignment and adjustment of the lift/escalator equipment Installing Lift Ropes (traction media) and adjust in accordance with approved procedures. The applicant will be required to have install suspension, safety and governor ropes to new or reconstructed lift equipment Installation of Lift Doors and Frames in accordance with approved procedures. The doors and frames to be installed include manual and power-operated solid sliding doors, multi-leaf doors, hinged doors, collapsible gates, shutter gates and bi-parting doors and shutters, door operators and safety devices for new or reconstructed lift equipment Checking and Setting the Lift/escalator Installation in accordance with approved procedures. The checks to be carried out include the final checks and adjustments to the operation of lift/escalator installations prior to final test and commissioning Carrying out site surveys Keeping the supervisor informed regarding the progress of work, hours spent and any non-compliance Staying in communication with the customer and the supervisor to ensure the satisfaction of the customer needs Profile description: What we're looking for: Qualified to NVQ level 3 minimum in Lift/Escalator Installation or equivalent or mechanically or electrically qualified Possession of a relevant/valid Construction Skills Certification Scheme (CSCS) card More advanced product and Installation knowledge/experience Proven fault finding and diagnostic skills The ability to work under pressure and to deadlines The ability to work independently with a flexible approach Good communication skills at different levels (Client/Installation Managers/SAIS Inspectors) Good Punctuality Manual dexterity - Requires the use of hands, arms and feet for repetitive lifting; use of hands and arms to operate various hand and power tools and to record written information Full UK driving License We offer: Join our purpose-driven organization. Help shape an industry in which two billion people rely on our products and services every day. Your development matters to us. We help you grow by offering the support you need to develop your skills and access a rewarding and fulfilling career. Thrive in a diverse and supportive culture. Through local and global initiatives, we promote a culture of inclusion which celebrates diversity and ensures that everyone feels valued Competitive salary with a discretionary annual bonus Company car or allowance (for eligible roles) 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with 6% company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts
Jun 23, 2026
Full time
Company description: Location: Bedfordshire, England, United Kingdom Job ID: 82994 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Job description: We are recruiting for a Lift Installation Engineer to cover the Bedfordshire area. The successful candidate will be responsible for delivering high quality installation work and completing handovers to the required standards. What you'll be doing: Installing lift/escalator Well and Ancillary Equipment in accordance with approved procedures by selecting appropriate tools and equipment based on the operations to be performed and the equipment to be installed Installing Traction Equipment in accordance with approved procedures by selecting appropriate tools and equipment. Installation will require the siting, assembly, fitting, alignment and adjustment of the lift/escalator equipment Installing Lift Ropes (traction media) and adjust in accordance with approved procedures. The applicant will be required to have install suspension, safety and governor ropes to new or reconstructed lift equipment Installation of Lift Doors and Frames in accordance with approved procedures. The doors and frames to be installed include manual and power-operated solid sliding doors, multi-leaf doors, hinged doors, collapsible gates, shutter gates and bi-parting doors and shutters, door operators and safety devices for new or reconstructed lift equipment Checking and Setting the Lift/escalator Installation in accordance with approved procedures. The checks to be carried out include the final checks and adjustments to the operation of lift/escalator installations prior to final test and commissioning Carrying out site surveys Keeping the supervisor informed regarding the progress of work, hours spent and any non-compliance Staying in communication with the customer and the supervisor to ensure the satisfaction of the customer needs Profile description: What we're looking for: Qualified to NVQ level 3 minimum in Lift/Escalator Installation or equivalent or mechanically or electrically qualified Possession of a relevant/valid Construction Skills Certification Scheme (CSCS) card More advanced product and Installation knowledge/experience Proven fault finding and diagnostic skills The ability to work under pressure and to deadlines The ability to work independently with a flexible approach Good communication skills at different levels (Client/Installation Managers/SAIS Inspectors) Good Punctuality Manual dexterity - Requires the use of hands, arms and feet for repetitive lifting; use of hands and arms to operate various hand and power tools and to record written information Full UK driving License We offer: Join our purpose-driven organization. Help shape an industry in which two billion people rely on our products and services every day. Your development matters to us. We help you grow by offering the support you need to develop your skills and access a rewarding and fulfilling career. Thrive in a diverse and supportive culture. Through local and global initiatives, we promote a culture of inclusion which celebrates diversity and ensures that everyone feels valued Competitive salary with a discretionary annual bonus Company car or allowance (for eligible roles) 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with 6% company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts
Mechanical Supervisor Hemel Hempstead Contract 1st Step Solutions are supporting a National M&E Contractor who are looking for a Mechanical Supervisor to join their team on a project in Hemel Hempstead. We are seeking Supervisors who have prior steam installation experience having worked directly for a Tier 1 M&E Contractors. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - First Aid at Work. - Good literacy skills. - Previous experience in a Supervisory/Management role. - Capable of driving a project.
Jun 23, 2026
Contractor
Mechanical Supervisor Hemel Hempstead Contract 1st Step Solutions are supporting a National M&E Contractor who are looking for a Mechanical Supervisor to join their team on a project in Hemel Hempstead. We are seeking Supervisors who have prior steam installation experience having worked directly for a Tier 1 M&E Contractors. Job Purpose: The responsibilities of this Mechanical Site Supervisor role include overseeing mechanical work and site trades, scoping work and ordering materials, issuing permits and ensuring safety rules are followed. Role: - Co-ordination of the installation. - Supervising Contractors and Subcontractors, ensuring all direct staff and Subcontractors are adequately trained and adhering to H&S procedures. - Conducting toolbox talks, ordering materials, completing schedules of work, scheduling materials to ensure programme of works delivered. - Liaise with Managers on a regular basis, reporting on any and all works conducted on site. - Managing variations. - Ensuring the quality of the installation was of a high standard. - Carrying out site surveys. - Ensuring the installation was snag free. - Paperwork management; RFI's, method statements, risk assessments, site diaries, progress reports. Requirements: - City and Guilds NVQ Level 3 in Pipefitting or equivalent. - CSCS Skill Card. - SSSTS/SMSTS. - First Aid at Work. - Good literacy skills. - Previous experience in a Supervisory/Management role. - Capable of driving a project.
Waste Collection Operative Barnsley £17.14ph To undertake operational duties in all weathers, which will involve a wide range of physically and mentally demanding tasks. To operate mechanical bin lifting machinery on a daily basis within strict health and safety procedures/guidelines. To be responsible for the careful day to day use, maintenance, security of vehicles, machinery and equipment. To be customer focussed, polite and courteous when responding to service improvement requests and when necessary to report problems to the driver, supervisor or manager. To work under the guidance of the driver and supervisor in conjunction with the use of personal initiative to deliver services to a professional standard and within agreed guidelines. To work to agreed schedules, standards and where necessary respond positively to new initiatives as required or directed by your line managers ensuring all targets are met. To find out more information please contact (url removed) Recruitment is done in line with safe recruitment practices. We are an equal opportunity agency
Jun 23, 2026
Contractor
Waste Collection Operative Barnsley £17.14ph To undertake operational duties in all weathers, which will involve a wide range of physically and mentally demanding tasks. To operate mechanical bin lifting machinery on a daily basis within strict health and safety procedures/guidelines. To be responsible for the careful day to day use, maintenance, security of vehicles, machinery and equipment. To be customer focussed, polite and courteous when responding to service improvement requests and when necessary to report problems to the driver, supervisor or manager. To work under the guidance of the driver and supervisor in conjunction with the use of personal initiative to deliver services to a professional standard and within agreed guidelines. To work to agreed schedules, standards and where necessary respond positively to new initiatives as required or directed by your line managers ensuring all targets are met. To find out more information please contact (url removed) Recruitment is done in line with safe recruitment practices. We are an equal opportunity agency
Logic360 Job Opportunity: MOT Inspector Location: Grimsby Employment Type: Temp to Permanent Working Shift Patterns: 4on 4off Working Hours: 06:00am - 18:00pm Salary: £17.87 per hour The Role: Within this role, you will be working as a part of our experienced mechanical team carrying out MOT checks. You will be working as a part of an experienced workshop team, ensuring our vehicles are finished to the highest standard for our customers, under the support and guidance of the supervisor and Workshop Manager. You will also oversee all elements of the business over weekend periods as part of a 4on4off shift rotation Responsibilities: Carry out MOT tests Undertake road and ramp testing and inspection as and when required. Carry out all repairs in line with approved methods to restore the vehicle to its original condition. Plan and organise time effectively to ensure all tasks are completed within set deadlines, achieving efficiency. Assist with general workshop tasks as and when required Diagnose problems on vehicles in the workshop and if needed undertake electrical diagnosis on vehicles Deal with warranty repairs in line with manufacturer standards Ensure all the relevant documentation is accurately completed and all company procedures are followed Skills and expertise : Previous experience in a similar role as a Vehicle Technician / Mechanic Qualified as a MOT Tester (essential) Qualified to City and Guilds or NVQ Level 3 (essential) Full UK Driving Licence (essential) Willing to support junior techs and offer support/expertise when needed. You will be passionate to work within the motor industry and take pride in their work, to the highest standards of work set by customers You will need to work independently on vehicles and have experience to make decisions when required Excellent attention to detail How to Apply: If you are a passionate and qualified MOT Inspector looking to take the next step in your career, we want to hear from you! Please send your CV to (url removed) or apply through our website at Logic 360 Group. Equal Opportunity Employer: Logic 360 Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We look forward to receiving your application and learning more about how you can contribute to our team. Thank you for considering Logic 360 Ltd as your next career destination! Please note that Logic 360 is a Recruitment Agency and Employment Business recruiting on behalf of our client. INDAUT
Jun 23, 2026
Full time
Logic360 Job Opportunity: MOT Inspector Location: Grimsby Employment Type: Temp to Permanent Working Shift Patterns: 4on 4off Working Hours: 06:00am - 18:00pm Salary: £17.87 per hour The Role: Within this role, you will be working as a part of our experienced mechanical team carrying out MOT checks. You will be working as a part of an experienced workshop team, ensuring our vehicles are finished to the highest standard for our customers, under the support and guidance of the supervisor and Workshop Manager. You will also oversee all elements of the business over weekend periods as part of a 4on4off shift rotation Responsibilities: Carry out MOT tests Undertake road and ramp testing and inspection as and when required. Carry out all repairs in line with approved methods to restore the vehicle to its original condition. Plan and organise time effectively to ensure all tasks are completed within set deadlines, achieving efficiency. Assist with general workshop tasks as and when required Diagnose problems on vehicles in the workshop and if needed undertake electrical diagnosis on vehicles Deal with warranty repairs in line with manufacturer standards Ensure all the relevant documentation is accurately completed and all company procedures are followed Skills and expertise : Previous experience in a similar role as a Vehicle Technician / Mechanic Qualified as a MOT Tester (essential) Qualified to City and Guilds or NVQ Level 3 (essential) Full UK Driving Licence (essential) Willing to support junior techs and offer support/expertise when needed. You will be passionate to work within the motor industry and take pride in their work, to the highest standards of work set by customers You will need to work independently on vehicles and have experience to make decisions when required Excellent attention to detail How to Apply: If you are a passionate and qualified MOT Inspector looking to take the next step in your career, we want to hear from you! Please send your CV to (url removed) or apply through our website at Logic 360 Group. Equal Opportunity Employer: Logic 360 Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We look forward to receiving your application and learning more about how you can contribute to our team. Thank you for considering Logic 360 Ltd as your next career destination! Please note that Logic 360 is a Recruitment Agency and Employment Business recruiting on behalf of our client. INDAUT
Rubicon Consulting is currently recruiting for Electrical Supervisor on a 6 Month Rolling Contract, based in Scottish Highlands. Role Summary This supporting role is responsible for assisting and driving work activities across designated areas by taking a lead role in coordinating small teams and work fronts on behalf of the Site Manager. The position reports directly to the Site Manager, or as otherwise required by the deployment, and carries a duty of care for both personal safety and the safety of all individuals on site, ensuring that work is always carried out safely and in accordance with established procedures. The role requires compliance with all applicable Quality, Environmental, Health and Safety (QEHS) procedures as communicated during the site induction. The individual is expected to lead assigned teams across various work fronts, ensuring that work is delivered on time, to the required quality standards, and within budget. This includes forward planning to ensure upcoming work fronts have the necessary engineering information, plant, materials, labour, and other resources available to successfully complete tasks. The role also involves operating within the timescales established by site management, proactively identifying and communicating any potential deviations in advance. Coordination with other work parties is essential to promote safe and efficient working practices across the site, while also capturing and reporting any delays or disruptions that impact the original scope of work. Key objectives include adhering to all site rules and requirements as communicated by the Site Management Team, carrying out actions and supporting the creation of required project documentation within agreed milestone dates, and actively participating in the completion of all task cards allocated to the team within the required timescales. The role holder is also responsible for ensuring compliance with timesheet and expense submission deadlines. Requirements Experience Apprentice trained with a minimum of City & Guilds (C&G) NVQ Level 3 qualification in an appropriate discipline, plus at least 1 year of relevant experience; or Industry-recognised training with a minimum of 2 years' experience working as part of a team on an Electricity Supply Industry (ESI) construction site or similar environment (e.g., Power Generation, Oil & Gas, or General Construction sites). Experienced in participating in site activities involving mechanical and/or electrical installation. Knowledge of and ability to comply with, and monitor, Health, Safety, Quality, and Environmental (HSQE) legislation, standards, and practices within a power industry environment. Demonstrates the presence, attitude, and personal qualities required to effectively lead site teams. Able to work effectively as part of a team or independently, as required by the project or site activities. For All Construction Projects CSCS / CCNSG Safety Passport. SSSTS - SMSTS 3 Day First Aid IPAF Temporary Works Supervisor HSG 47 MEWP Roto 360 Manual Handling. Working at Height. Fire safety awareness Client specific (NG for example only) SSE Authorisation Cat 3, Scottish Power / NG Person BESC etc. NG Competent Person NSI6. NG Competent Person NSI8. (Limited). Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance and competitive advantage by choosing the right people first time!
Jun 23, 2026
Contractor
Rubicon Consulting is currently recruiting for Electrical Supervisor on a 6 Month Rolling Contract, based in Scottish Highlands. Role Summary This supporting role is responsible for assisting and driving work activities across designated areas by taking a lead role in coordinating small teams and work fronts on behalf of the Site Manager. The position reports directly to the Site Manager, or as otherwise required by the deployment, and carries a duty of care for both personal safety and the safety of all individuals on site, ensuring that work is always carried out safely and in accordance with established procedures. The role requires compliance with all applicable Quality, Environmental, Health and Safety (QEHS) procedures as communicated during the site induction. The individual is expected to lead assigned teams across various work fronts, ensuring that work is delivered on time, to the required quality standards, and within budget. This includes forward planning to ensure upcoming work fronts have the necessary engineering information, plant, materials, labour, and other resources available to successfully complete tasks. The role also involves operating within the timescales established by site management, proactively identifying and communicating any potential deviations in advance. Coordination with other work parties is essential to promote safe and efficient working practices across the site, while also capturing and reporting any delays or disruptions that impact the original scope of work. Key objectives include adhering to all site rules and requirements as communicated by the Site Management Team, carrying out actions and supporting the creation of required project documentation within agreed milestone dates, and actively participating in the completion of all task cards allocated to the team within the required timescales. The role holder is also responsible for ensuring compliance with timesheet and expense submission deadlines. Requirements Experience Apprentice trained with a minimum of City & Guilds (C&G) NVQ Level 3 qualification in an appropriate discipline, plus at least 1 year of relevant experience; or Industry-recognised training with a minimum of 2 years' experience working as part of a team on an Electricity Supply Industry (ESI) construction site or similar environment (e.g., Power Generation, Oil & Gas, or General Construction sites). Experienced in participating in site activities involving mechanical and/or electrical installation. Knowledge of and ability to comply with, and monitor, Health, Safety, Quality, and Environmental (HSQE) legislation, standards, and practices within a power industry environment. Demonstrates the presence, attitude, and personal qualities required to effectively lead site teams. Able to work effectively as part of a team or independently, as required by the project or site activities. For All Construction Projects CSCS / CCNSG Safety Passport. SSSTS - SMSTS 3 Day First Aid IPAF Temporary Works Supervisor HSG 47 MEWP Roto 360 Manual Handling. Working at Height. Fire safety awareness Client specific (NG for example only) SSE Authorisation Cat 3, Scottish Power / NG Person BESC etc. NG Competent Person NSI6. NG Competent Person NSI8. (Limited). Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance and competitive advantage by choosing the right people first time!
Days 37 hours per week + OT 33 Days Holidays + Exc Benefits Leading specialist manufacturer with global presence Our client, based in Oldham, has a reputation for innovation and they consistently lead in their chosen industry sector. They have enjoyed continued growth in both the domestic and export markets and have a strong order book and an exciting future. Due to continued growth we are looking to recruit an experienced Electrical & Test Engineer to join their team. The role is primarily focused on electrical and functional testing, fault diagnosis, and regulatory compliance with assembly and production support activities undertaken where required. Key duties include; To carry out the electrical assembly of parts, sub- assemblies and products in line with the requirements of engineering drawings. To prepare products for testing, including powering up products and carrying out pre- test safety checks. Undertake electrical panel wiring and control system assembly in accordance with engineering drawings and wiring schedules Carry out mechanical assembly, sub-assemblies and complete units where required Support production builds to ensure products are completed on time, to specification, and to quality standards To follow Company Quality Control procedures i.e. ISO(Apply online only) To test products in line with Company procedures To maintain production in line with the production plan and instructions from the departmental supervisor/planner to ensure that other production departments are supplied with products and parts to maintain their own plan. To carry out, where appropriate, repairs and maintenance to plant and equipment Occasional site work To be considered for this position the successful candidate must have; Proven experience in electrical testing and fault-finding of electromechanical equipment Electrical panel wiring and control system experience Ability to read and interpret electrical schematics, wiring diagrams, and engineering drawings Strong understanding of electrical safety and compliance requirements Experience working within a structured production or test environment Ability to work independently and as part of a team with a high level of attention to detail Strong problem-solving and diagnostic skills 18th/19th Edition Absolutely an advantage! Hours of work are 37 per week, Monday to Friday or there is an option to work a 9 day fortnight giving you every other Friday off. you are seeking a new opportunity with an established growing company please send your CV to Chris Chambury at The Recruitment Fix.
Jun 23, 2026
Full time
Days 37 hours per week + OT 33 Days Holidays + Exc Benefits Leading specialist manufacturer with global presence Our client, based in Oldham, has a reputation for innovation and they consistently lead in their chosen industry sector. They have enjoyed continued growth in both the domestic and export markets and have a strong order book and an exciting future. Due to continued growth we are looking to recruit an experienced Electrical & Test Engineer to join their team. The role is primarily focused on electrical and functional testing, fault diagnosis, and regulatory compliance with assembly and production support activities undertaken where required. Key duties include; To carry out the electrical assembly of parts, sub- assemblies and products in line with the requirements of engineering drawings. To prepare products for testing, including powering up products and carrying out pre- test safety checks. Undertake electrical panel wiring and control system assembly in accordance with engineering drawings and wiring schedules Carry out mechanical assembly, sub-assemblies and complete units where required Support production builds to ensure products are completed on time, to specification, and to quality standards To follow Company Quality Control procedures i.e. ISO(Apply online only) To test products in line with Company procedures To maintain production in line with the production plan and instructions from the departmental supervisor/planner to ensure that other production departments are supplied with products and parts to maintain their own plan. To carry out, where appropriate, repairs and maintenance to plant and equipment Occasional site work To be considered for this position the successful candidate must have; Proven experience in electrical testing and fault-finding of electromechanical equipment Electrical panel wiring and control system experience Ability to read and interpret electrical schematics, wiring diagrams, and engineering drawings Strong understanding of electrical safety and compliance requirements Experience working within a structured production or test environment Ability to work independently and as part of a team with a high level of attention to detail Strong problem-solving and diagnostic skills 18th/19th Edition Absolutely an advantage! Hours of work are 37 per week, Monday to Friday or there is an option to work a 9 day fortnight giving you every other Friday off. you are seeking a new opportunity with an established growing company please send your CV to Chris Chambury at The Recruitment Fix.
Nights - Sunday, Monday, Tuesday, - 16:00pm to 04:00am (after 6 weeks rotates to Wednesday, Thursday, Friday for a further 6 weeks) Pay Rate - 18.07ph per hour rising to 18.54ph upon successful completion of training (Over time is after 36 hours a week at time and a quarter) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately 4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop Here at Selby, we employ a team over 750 colleagues. A site steeped in history; we are the UK's number one manufacturer of customer private label cooking sauces and pickles. We have been serving our customers out of our Selby site since 1914. We produce more than 160 million units per year across 600 different product lines for customers such as Morrisons, Tesco & Asda. What you'll be doing This role operates within defined procedures, plans, budgets and programmes. The day to day work is assigned by a manager or supervisor. Duties in this role include: Ensure the efficient running of the SMI and any associated equipment; (logopak, spice capper ,top tagger , video, pallet stacking) To troubleshoot and resolve minor issues (mechanical and procedural) To liaise with Area Process Leaders, Line Coordinator, Engineers and Shift Managers Ensure the correct glass and caps are on the line; Ensure the efficient running of the Capper, this includes assisting in or completing a capper changeover when required; Consider quality, health and safety issues and the implications at all times; Ensure that you work to "Right First Time" ethos; Trouble shoot and maintain efficiencies with mechanical and procedural understanding; Work along side QA; Completing data capture; Resolving minor issues, mechanical and procedural; Mentoring and assisting with the training of new staff. What we're looking for Experience working with machinery in a manufacturing environment is essential Comply with all relevant business and site policies such as Health and Safety and Food Safety standards Demonstrate flexibility, adaptability, and teamwork with the ability to work under pressure Have the ability to work in a fast-paced environment producing quality and safe products Good attention to details Have strong and effective communication skills both verbal and written Be open to working in a production environment with varying temperatures Have a positive attitude and work ethic We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension competitively matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Jun 23, 2026
Full time
Nights - Sunday, Monday, Tuesday, - 16:00pm to 04:00am (after 6 weeks rotates to Wednesday, Thursday, Friday for a further 6 weeks) Pay Rate - 18.07ph per hour rising to 18.54ph upon successful completion of training (Over time is after 36 hours a week at time and a quarter) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately 4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop Here at Selby, we employ a team over 750 colleagues. A site steeped in history; we are the UK's number one manufacturer of customer private label cooking sauces and pickles. We have been serving our customers out of our Selby site since 1914. We produce more than 160 million units per year across 600 different product lines for customers such as Morrisons, Tesco & Asda. What you'll be doing This role operates within defined procedures, plans, budgets and programmes. The day to day work is assigned by a manager or supervisor. Duties in this role include: Ensure the efficient running of the SMI and any associated equipment; (logopak, spice capper ,top tagger , video, pallet stacking) To troubleshoot and resolve minor issues (mechanical and procedural) To liaise with Area Process Leaders, Line Coordinator, Engineers and Shift Managers Ensure the correct glass and caps are on the line; Ensure the efficient running of the Capper, this includes assisting in or completing a capper changeover when required; Consider quality, health and safety issues and the implications at all times; Ensure that you work to "Right First Time" ethos; Trouble shoot and maintain efficiencies with mechanical and procedural understanding; Work along side QA; Completing data capture; Resolving minor issues, mechanical and procedural; Mentoring and assisting with the training of new staff. What we're looking for Experience working with machinery in a manufacturing environment is essential Comply with all relevant business and site policies such as Health and Safety and Food Safety standards Demonstrate flexibility, adaptability, and teamwork with the ability to work under pressure Have the ability to work in a fast-paced environment producing quality and safe products Good attention to details Have strong and effective communication skills both verbal and written Be open to working in a production environment with varying temperatures Have a positive attitude and work ethic We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension competitively matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Days - Monday, Tuesday, Wednesday - 04:00am until 16:00pm (after 6 weeks rotates to Thursday, Friday and Saturday for a further 6 weeks) Pay Rate - 15.60ph per hour rising to 16.02ph upon successful completion of training (Over time is after 36 hours a week at time and a quarter) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately 4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop Here at Selby, we employ a team over 750 colleagues. A site steeped in history; we are the UK's number one manufacturer of customer private label cooking sauces and pickles. We have been serving our customers out of our Selby site since 1914. We produce more than 160 million units per year across 600 different product lines for customers such as Morrisons, Tesco & Asda. What you'll be doing This role operates within defined procedures, plans, budgets and programmes. The day to day work is assigned by a manager or supervisor. Duties in this role include: Ensure the efficient running of the SMI and any associated equipment; (logopak, spice capper ,top tagger , video, pallet stacking) To troubleshoot and resolve minor issues (mechanical and procedural) To liaise with Area Process Leaders, Line Coordinator, Engineers and Shift Managers Ensure the correct glass and caps are on the line; Ensure the efficient running of the Capper, this includes assisting in or completing a capper changeover when required; Consider quality, health and safety issues and the implications at all times; Ensure that you work to "Right First Time" ethos; Trouble shoot and maintain efficiencies with mechanical and procedural understanding; Work along side QA; Completing data capture; Resolving minor issues, mechanical and procedural; Mentoring and assisting with the training of new staff. What we're looking for Experience working with machinery in a manufacturing environment is essential Comply with all relevant business and site policies such as Health and Safety and Food Safety standards Demonstrate flexibility, adaptability, and teamwork with the ability to work under pressure Have the ability to work in a fast-paced environment producing quality and safe products Good attention to details Have strong and effective communication skills both verbal and written Be open to working in a production environment with varying temperatures Have a positive attitude and work ethic We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension competitively matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Jun 23, 2026
Full time
Days - Monday, Tuesday, Wednesday - 04:00am until 16:00pm (after 6 weeks rotates to Thursday, Friday and Saturday for a further 6 weeks) Pay Rate - 15.60ph per hour rising to 16.02ph upon successful completion of training (Over time is after 36 hours a week at time and a quarter) Why Greencore? Following the combination with Bakkavor in January 2026, we're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 28,000 talented colleagues across 36 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately 4bn. Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy the very best, whenever and wherever they shop Here at Selby, we employ a team over 750 colleagues. A site steeped in history; we are the UK's number one manufacturer of customer private label cooking sauces and pickles. We have been serving our customers out of our Selby site since 1914. We produce more than 160 million units per year across 600 different product lines for customers such as Morrisons, Tesco & Asda. What you'll be doing This role operates within defined procedures, plans, budgets and programmes. The day to day work is assigned by a manager or supervisor. Duties in this role include: Ensure the efficient running of the SMI and any associated equipment; (logopak, spice capper ,top tagger , video, pallet stacking) To troubleshoot and resolve minor issues (mechanical and procedural) To liaise with Area Process Leaders, Line Coordinator, Engineers and Shift Managers Ensure the correct glass and caps are on the line; Ensure the efficient running of the Capper, this includes assisting in or completing a capper changeover when required; Consider quality, health and safety issues and the implications at all times; Ensure that you work to "Right First Time" ethos; Trouble shoot and maintain efficiencies with mechanical and procedural understanding; Work along side QA; Completing data capture; Resolving minor issues, mechanical and procedural; Mentoring and assisting with the training of new staff. What we're looking for Experience working with machinery in a manufacturing environment is essential Comply with all relevant business and site policies such as Health and Safety and Food Safety standards Demonstrate flexibility, adaptability, and teamwork with the ability to work under pressure Have the ability to work in a fast-paced environment producing quality and safe products Good attention to details Have strong and effective communication skills both verbal and written Be open to working in a production environment with varying temperatures Have a positive attitude and work ethic We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension competitively matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Mechanical and Electrical Manager (M&E Manager) Derby - M&E Manager c 50k - 62k neg dep exp + car allowance + benefits Our highly successful niche sector client based in Derby offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional Mechanical and Electrical Manager (M&E Manager) to oversee the supply chain operation and support the planning, procurement and delivery of M&E works across a range of projects and bids. To be considered for this varied and challenging Mechanical and Electrical Manager (M&E Manager) role, you will be a well organised team player who demonstrates exceptional attention to detail and commercial awareness and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: Tender Stages: Co-ordinating and attending site surveys at both tender and project delivery stages. Evaluating M&E supplier proposals for scope completeness, risk, programme and commercial alignment Supporting the bid team with pricing strategy, risk allowances, qualifications and clarifications for M&E scope. Project Delivery for M&E Works: Producing technical and delivery requirements for supplier quotations and conducting evaluations and supporting site surveys as required to inform delivery strategy. Attending design meetings (along with design sub-contractor as required). Providing technical and delivery support to the Site Supervisor in site progress meetings and assisting the Project Managers in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans. Managing and reviewing the production of supplier designs Managing M&E FAT's and reviewing all relevant documentation. Managing the co-ordination of designers and installers (which may be different sub-contractors) Reviewing site test documentation and RAMS for suitability, completeness and alignment. Managing site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful Mechanical and Electrical Manager (M&E Manager) candidate will be qualified to at least HND Electrical Engineering or above and demonstrate at least 4 years previous experience in a similar role with a high level of familiarity of electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors and extensive experience of supporting bids or preconstruction activities. With a good level of IT proficiency (Excel and Word mandatory) and be legally permitted to work in the Republic of Ireland without restriction, you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. Contact the Electrical Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to (url removed) for further details.
Jun 23, 2026
Full time
Mechanical and Electrical Manager (M&E Manager) Derby - M&E Manager c 50k - 62k neg dep exp + car allowance + benefits Our highly successful niche sector client based in Derby offers a range of highest quality technical solutions that encompass high-integrity control and monitoring systems to blue chip clients worldwide, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit an experienced and professional Mechanical and Electrical Manager (M&E Manager) to oversee the supply chain operation and support the planning, procurement and delivery of M&E works across a range of projects and bids. To be considered for this varied and challenging Mechanical and Electrical Manager (M&E Manager) role, you will be a well organised team player who demonstrates exceptional attention to detail and commercial awareness and a high level of electrical infrastructure and electrical principles knowledge, holding a relevant qualification (HND or above) in electrical engineering or equivalent, whilst also having the appropriate skills and experience to undertake the following (including but not limited to) duties: Tender Stages: Co-ordinating and attending site surveys at both tender and project delivery stages. Evaluating M&E supplier proposals for scope completeness, risk, programme and commercial alignment Supporting the bid team with pricing strategy, risk allowances, qualifications and clarifications for M&E scope. Project Delivery for M&E Works: Producing technical and delivery requirements for supplier quotations and conducting evaluations and supporting site surveys as required to inform delivery strategy. Attending design meetings (along with design sub-contractor as required). Providing technical and delivery support to the Site Supervisor in site progress meetings and assisting the Project Managers in the planning, execution and completion of the M&E sub-contract works, and managing supplier progress and performance, ensuring alignment with project plans. Managing and reviewing the production of supplier designs Managing M&E FAT's and reviewing all relevant documentation. Managing the co-ordination of designers and installers (which may be different sub-contractors) Reviewing site test documentation and RAMS for suitability, completeness and alignment. Managing site supervisors for M&E works and all aspects of installation handover, as well as all associated members of the team including Commissioning Engineers, Electrical Design Engineers and CAD Engineers. It is envisaged that the successful Mechanical and Electrical Manager (M&E Manager) candidate will be qualified to at least HND Electrical Engineering or above and demonstrate at least 4 years previous experience in a similar role with a high level of familiarity of electrical infrastructure and electrical principles normally associated with projects in transportation, power or comparable sizable projects from other sectors and extensive experience of supporting bids or preconstruction activities. With a good level of IT proficiency (Excel and Word mandatory) and be legally permitted to work in the Republic of Ireland without restriction, you will be comfortable working under pressure and to tight deadlines with excellent attention to detail and the flexibility and adaptability to manage a range of different tasks and to work extra hours as required. Contact the Electrical Team at Premier Technical Recruitment on (phone number removed) or email your cv in confidence to (url removed) for further details.
Senior Project Manager - National Grid Substations (National Grid Person) Location: Ideally Based in London or South East England - Nationwide Patch Salary: 80,000 - 85,000 per annum (DOE) + Package Job Type: Permanent Start Date: July 20th Overview: A leading contractor delivering major transmission and energy infrastructure projects across the UK is seeking an experienced Senior Project Manager to oversee the successful delivery of National Grid substation projects across London and the surrounding regions. This is an excellent opportunity for a highly motivated project professional with a strong background in high-voltage transmission infrastructure to join a growing business with a substantial pipeline of National Grid and energy transition projects. The successful candidate will be responsible for leading multi-disciplinary project teams, managing client relationships, and ensuring projects are delivered safely, on time, within budget, and to the highest quality standards. Key Responsibilities: Lead the end-to-end delivery of National Grid substation projects from pre-construction through to completion. Manage project programmes, budgets, resources, risks, and commercial performance. Act as the primary point of contact for National Grid, consultants, subcontractors, and key stakeholders. Ensure compliance with National Grid standards, project specifications, and contractual obligations. Oversee project planning, procurement strategies, and resource allocation. Lead and mentor project teams including Site Managers, Engineers, Supervisors, and subcontractors. Monitor project progress and implement corrective actions where required. Drive a strong health, safety, environmental, and quality culture across all project activities. Manage project reporting, forecasts, cost control, and client communications. Ensure all works are delivered in accordance with CDM regulations and company HSEQ procedures. Support business development activities and contribute to future project opportunities within the transmission and distribution sector. Essential Requirements: Proven experience as a Senior Project Manager, Project Manager, or equivalent leadership role within the power transmission or substation sector. Strong experience delivering National Grid substation projects, ideally up to 400kV. Excellent understanding of NEC contracts and commercial project management. Demonstrable experience managing multi-million-pound infrastructure projects. Strong stakeholder management and client-facing experience. Knowledge of National Grid standards, procedures, and project delivery requirements. Degree or HNC/HND in Civil Engineering, Electrical Engineering, Construction Management, or a related discipline. APM, PRINCE2, or equivalent project management qualification. National Grid Person. Full UK Driving Licence. Strong leadership, communication, and organisational skills. Desirable Qualifications & Experience: Previous experience delivering transmission infrastructure, AIS/GIS substations, HVDC, BESS, or major power infrastructure projects. Experience managing multidisciplinary civil, mechanical, and electrical packages. What's on Offer: Competitive salary of 80,000 - 85,000 per annum depending on experience. Company car or car allowance. Pension scheme. Private healthcare. Annual bonus scheme. Life assurance. Ongoing professional development and progression opportunities. Opportunity to work on some of the UK's most significant National Grid infrastructure projects. If you are an experienced Project Manager looking to play a key role in delivering critical energy infrastructure projects across the UK transmission network, we would be keen to hear from you. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Jun 23, 2026
Full time
Senior Project Manager - National Grid Substations (National Grid Person) Location: Ideally Based in London or South East England - Nationwide Patch Salary: 80,000 - 85,000 per annum (DOE) + Package Job Type: Permanent Start Date: July 20th Overview: A leading contractor delivering major transmission and energy infrastructure projects across the UK is seeking an experienced Senior Project Manager to oversee the successful delivery of National Grid substation projects across London and the surrounding regions. This is an excellent opportunity for a highly motivated project professional with a strong background in high-voltage transmission infrastructure to join a growing business with a substantial pipeline of National Grid and energy transition projects. The successful candidate will be responsible for leading multi-disciplinary project teams, managing client relationships, and ensuring projects are delivered safely, on time, within budget, and to the highest quality standards. Key Responsibilities: Lead the end-to-end delivery of National Grid substation projects from pre-construction through to completion. Manage project programmes, budgets, resources, risks, and commercial performance. Act as the primary point of contact for National Grid, consultants, subcontractors, and key stakeholders. Ensure compliance with National Grid standards, project specifications, and contractual obligations. Oversee project planning, procurement strategies, and resource allocation. Lead and mentor project teams including Site Managers, Engineers, Supervisors, and subcontractors. Monitor project progress and implement corrective actions where required. Drive a strong health, safety, environmental, and quality culture across all project activities. Manage project reporting, forecasts, cost control, and client communications. Ensure all works are delivered in accordance with CDM regulations and company HSEQ procedures. Support business development activities and contribute to future project opportunities within the transmission and distribution sector. Essential Requirements: Proven experience as a Senior Project Manager, Project Manager, or equivalent leadership role within the power transmission or substation sector. Strong experience delivering National Grid substation projects, ideally up to 400kV. Excellent understanding of NEC contracts and commercial project management. Demonstrable experience managing multi-million-pound infrastructure projects. Strong stakeholder management and client-facing experience. Knowledge of National Grid standards, procedures, and project delivery requirements. Degree or HNC/HND in Civil Engineering, Electrical Engineering, Construction Management, or a related discipline. APM, PRINCE2, or equivalent project management qualification. National Grid Person. Full UK Driving Licence. Strong leadership, communication, and organisational skills. Desirable Qualifications & Experience: Previous experience delivering transmission infrastructure, AIS/GIS substations, HVDC, BESS, or major power infrastructure projects. Experience managing multidisciplinary civil, mechanical, and electrical packages. What's on Offer: Competitive salary of 80,000 - 85,000 per annum depending on experience. Company car or car allowance. Pension scheme. Private healthcare. Annual bonus scheme. Life assurance. Ongoing professional development and progression opportunities. Opportunity to work on some of the UK's most significant National Grid infrastructure projects. If you are an experienced Project Manager looking to play a key role in delivering critical energy infrastructure projects across the UK transmission network, we would be keen to hear from you. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Owen Daniels are supporting a leading and well-established manufacturing and engineering business, is currently recruiting for an experienced Electro Mechanical Fitter Team Leader to join their growing operation based in Coventry.This is an excellent opportunity for a hands-on engineering professional with strong leadership experience to join a highly reputable company working across a wide range of rotating equipment including generators, AC/DC motors, pumps, and associated electro-mechanical systems.The RoleThe successful candidate will lead a small team of 6 engineers within the workshop, overseeing the repair, overhaul, assembly, and testing of electro-mechanical equipment while ensuring high standards of quality, safety, and productivity are maintained at all times.This is a hands-on position suited to someone from a manufacturing, service, or heavy engineering background who is comfortable both leading a team and supporting day-to-day engineering activities.Key Responsibilities Supervising and supporting a team of 6 electro-mechanical engineers/fitters Carrying out fault finding, servicing, repair, and overhaul work on: Generators AC/DC motors Pumps and rotating equipment Coordinating daily workshop activities and workloads Ensuring work is completed to customer specifications and deadlines Maintaining health & safety and quality standards throughout the workshop Providing technical support and guidance to the engineering team Supporting continuous improvement initiatives Candidate Requirements Previous experience working on generators, AC/DC motors, or rotating equipment Prior experience in a Team Leader, Supervisor, or Senior Engineer position Strong electro-mechanical fault-finding and repair capabilities Manufacturing, engineering, or industrial background Ability to read and interpret engineering drawings Excellent communication and organisational skills Engineering qualification or apprenticeship beneficial If this role is of interest, please apply now.
Jun 22, 2026
Full time
Owen Daniels are supporting a leading and well-established manufacturing and engineering business, is currently recruiting for an experienced Electro Mechanical Fitter Team Leader to join their growing operation based in Coventry.This is an excellent opportunity for a hands-on engineering professional with strong leadership experience to join a highly reputable company working across a wide range of rotating equipment including generators, AC/DC motors, pumps, and associated electro-mechanical systems.The RoleThe successful candidate will lead a small team of 6 engineers within the workshop, overseeing the repair, overhaul, assembly, and testing of electro-mechanical equipment while ensuring high standards of quality, safety, and productivity are maintained at all times.This is a hands-on position suited to someone from a manufacturing, service, or heavy engineering background who is comfortable both leading a team and supporting day-to-day engineering activities.Key Responsibilities Supervising and supporting a team of 6 electro-mechanical engineers/fitters Carrying out fault finding, servicing, repair, and overhaul work on: Generators AC/DC motors Pumps and rotating equipment Coordinating daily workshop activities and workloads Ensuring work is completed to customer specifications and deadlines Maintaining health & safety and quality standards throughout the workshop Providing technical support and guidance to the engineering team Supporting continuous improvement initiatives Candidate Requirements Previous experience working on generators, AC/DC motors, or rotating equipment Prior experience in a Team Leader, Supervisor, or Senior Engineer position Strong electro-mechanical fault-finding and repair capabilities Manufacturing, engineering, or industrial background Ability to read and interpret engineering drawings Excellent communication and organisational skills Engineering qualification or apprenticeship beneficial If this role is of interest, please apply now.
