20 jobs found

Electrical Inspector 24 month Fixed Term Contract Based in Ampthill Offering up to 40,000 Do you hold an IPC-620 Certification? Do you have experience in final inspection on cables/harnesses? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! Due to the nature of what you will be working on, you will be required to obtain high level MOD security clearance. You will be involved in: Product testing for conformance, which include; typical tests such as continuity, bonding, resistance. Programming and use of ATEs Adherence to work instructions and managing non-conforming products High volume electrical cable manufacturing as well as one-off or investigtion work Your skillset may include: IPC620 - Requirements and Acceptance for Cable and Wire Harness Assemblies Understanding and handling of ESD products Performing electrical inspection verification by use of measurement hand tools such as Digital Volt Multimeters, Ohmmeters Ability to follow standard operating procedures (SOPs) ATE programming and testing Ability to manage changing priorities in a dynamic environment Experience with SAP or similar systems Continuous improvement mindset with a focus on efficiency and accuracy Logical approach to problem-solving and data interpretation Final inspection on cable harness If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Electrical Inspector 24 month Fixed Term Contract Based in Ampthill Offering up to 40,000 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Job Title: Production Inspector (Glass) Location: Witham Hours: Monday to Thursday: 6:00am - 2:30pm (45 minutes break at 9:00am and 12:00pm) - Friday: 6:00am - 2:00pm (same break structure) Pay: 12.71ph + Holiday, Pension and Adecco Benefits - Pay increase upon going permanent Duration: Temporary to Permanent Start Date : Immediate start after successful interview Role Overview We are seeking a detail-oriented Production Inspector (Glass) to join our team. This role is responsible for ensuring all incoming glass meets quality standards by conducting thorough inspections, identifying defects, and reporting issues promptly to maintain production efficiency and product integrity. Key Responsibilities Inspect all glass deliveries upon arrival to ensure they meet required quality standards Identify defects such as scratches, chips, distortions, or other imperfections Accurately record and report any issues in a timely manner Liaise with relevant departments to resolve quality concerns Maintain inspection records and documentation Ensure compliance with health & safety procedures at all times Support general production activities when required Skills & Experience Previous experience within the glass or manufacturing industry (desirable) Strong attention to detail and quality-focused mindset Ability to work independently and as part of a team Good communication skills Reliable and proactive approach to work Why Work for Adecco? Weekly pay Candidate of the Month incentives Boost Rewards Scheme - earn points and access retail discounts Access to support programmes Eye care vouchers Competitive pension scheme If you are available immediately with Window Manufacturing experience, then this could be your next career move. Apply or contact us at the office for further information. We use generative AI tools to support our candidate screening process. This helps us ensure fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

We have a vacancy within our Inspection Department and are currently recruiting for the role of an Inspector on a Permanent Basis. We are looking for candidates who have relevant and proven experience seeking an opportunity to develop their skills and join a growing Organisation. Location: Accrofab Alcester Limited B49 6EH Shift Pattern: 39 hours per week working the Day Shift; 07.30 to 16.30 Monday to Thursday, and Friday 07.30 to 12.30 with designated breaks. Main duties and responsibilities To carry out 1st off and Final Inspection using manual and Visual Inspection techniques Performing calibration activities as required to support operations. Running of pre-set up CMM programs, analysing and recording results and making appropriate quality decisions. Population of the inspection data base with all relevant dimensions. Sentencing of parts inspected on optical (Keyence, Scan, OGP) and CMM Supporting the internal non-conformance process; raising rejects and ensuring all containment is captured. To liaise closely with Engineering to ensure the smooth transition of new products - New Product Introduction (NPI). To liaise closely with Product Quality to ensure all relevant ADP/ITP data is provided to the required standard. Completion of FAIR packs by means Manual Inspection General responsibilities: Comply with all company Environmental, Health and Safety (EHS) requirements. Read and understand the requirements on the Job Card for the operation to be carried out. Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. Use of all measuring equipment as defined within Inspection Plans to check conformance to requirements. Carry out in process inspection in accordance with relevant inspection plans to ensure that components are conforming prior to passing on to subsequent operations. Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. Complete all work booking requirements within the MRP system to ensure accurate WIP records. Follow work handling and storage instructions to prevent damage to components. Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated. Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. Engage and contribute to Continuous Improvement activities to maximise efficiency. Comply with all company procedures and policies. Person Specification: 1/2 years' experience in the Aerospace Industry/ Engineering/ Manufacturing/Any industry involving machine setting and operating in a similar role is desirable Must become familiar with quality & manufacturing standards and maintain and achieve specified targets and objectives in line with business requirements Positive, 'can do' attitude Productivity and Familiarisation with a range of presses. Willing to learn, positive, patient. Takes full ownership of their area of responsibility Disciplined and self-motivated Has a strong team work and supportive mentality We will be selecting a candidate who is aligned with our RISE Values; Respect, Integrity, Safety and Excellence, and who collaborates well with others to maximise teamworking. We are an equal opportunities employer. If you require any reasonable adjustments or support during the recruitment process, please do not hesitate to contact us. If you are interested and believe you have the relevant experience, please apply. We look forward to hearing from you.REF-

Owen Daniels are supporting a highly regarded global engineering and manufacturing business, supplying advanced fluid-flow and mechanical systems into a wide range of industrial and commercial applications. With a strong reputation for technical excellence, innovation and quality, they are now looking to appoint an experienced Quality Engineer to support product quality, inspection activity and continuous improvement across their manufacturing operation.This is an excellent opportunity for a hands-on Quality Engineer with experience in mechanical or electromechanical fabrication, modular systems, pressure-related assemblies or engineered manufacturing environments , who is comfortable working across inspection, documentation, compliance and problem-solving activities within a busy production setting.The RoleReporting to the Quality Engineering Lead, the Quality Engineer will be responsible for maintaining and improving the quality of products delivered by the manufacturing site. The successful candidate will be confident working on the shop floor, supporting production teams, reviewing technical documentation, coordinating inspection and testing activity, and driving quality improvements through structured root cause analysis and corrective action.Key Responsibilities Oversee and coordinate incoming, in-process and final inspection activities to ensure products meet defined quality standards and customer requirements Carry out or support dimensional and visual checks against GA drawings, isometrics, specifications and build documentation Verify key assembly requirements including bolt torque, gasket type, tagging, flow direction and build configuration Support and coordinate NDT activities where required, including review of reports and close-out of findings Improve inspection efficiency through the application of appropriate sampling methods, inspection planning and quality controls Provide technical guidance to inspectors and production teams to ensure consistency and accuracy of inspection activities Standards, Compliance & Documentation Ensure manufactured builds conform to drawings, specifications, P&IDs, isometrics and relevant quality or regulatory standards Support compliance with standards such as ISO 9001 , pressure equipment and piping requirements, and other applicable customer or project specifications Maintain material and device traceability, including heat number traceability , calibrated equipment control and documentation of quality records Create and maintain Inspection & Test Plans (ITPs), quality plans, inspection checklists, weld maps and related manufacturing quality documentation Manage non-conformance reports (NCRs), concessions and corrective actions , ensuring robust containment and timely close-out Compile and review quality dossiers / manufacturing record packs including material certification, welding documentation, NDT reports, pressure test records, electrical test certification and FAT documentation Problem Solving & Continuous Improvement Lead and support the site NCR / CAPA process , applying structured problem-solving tools such as 5 Whys, Ishikawa and root cause analysis Analyse recurring quality issues, defect trends and first-pass yield performance to identify chronic manufacturing issues and drive sustainable improvements Work with production and engineering teams to reduce rework, improve build quality and increase right-first-time performance Feed manufacturability and quality improvement opportunities back into Collaboration & Shop Floor Support Work closely with Production, Engineering, Project Management and Supply Chain teams to provide clear visibility of quality status, risk and required actions Coach and support shop floor personnel including fitters, welders and assembly technicians on inspection criteria, cleanliness standards, testing requirements and quality expectations Candidate Requirements Proven experience in a Quality Engineer, Manufacturing Quality Engineer or Product Quality role within a mechanical, electromechanical or engineered manufacturing environment Strong practical experience of inspection, build verification and quality control within fabrication, modular systems, pressure assemblies, pipework or similar manufacturing operations Ability to read and interpret P&IDs, isometric drawings, GA drawings, electrical schematics, data sheets and technical specifications Hands-on knowledge of precision measurement, pressure testing, torque verification and basic electrical test methods Experience with material traceability, weld quality documentation, NDT coordination and inspection records Good understanding of ISO 9001 quality systems , NCR/CAPA processes and manufacturing documentation control Strong problem-solving skills with experience using root cause analysis and corrective action tools Confident communicator who is comfortable engaging with production teams, suppliers, customers and third-party inspectors Practical, detail-focused and able to work effectively in a fast-paced manufacturing environment If this role is of interest, please apply now to hear more.

CSWIP Welding Inspector An excellent opportunity for a CSWIP 3.1 or CSWIP 3.2 welding professional to support quality assurance, weld inspection, fabrication, NDT review and documentation control. If you've also worked in the following roles, we'd also like to hear from you: NDT Inspector, Welding Coordinator, Fabrication Inspector, Welding Quality Engineer, Quality Technician SALARY: Competitive + Benefits LOCATION: Great Yarmouth, Norfolk, East Anglia (NR31) - candidates must live within a commutable distance JOB TYPE: Full-Time, Permanent WORKING HOURS: 38 Hours per Week (early finish on Fridays) JOB OVERVIEW We have a fantastic new job opportunity for a CSWIP Welding Inspector to support fabrication, welding inspection, NDT activities and quality control across a busy manufacturing environment. As a CSWIP Welding Inspector you will help maintain welding standards, inspect welded fabrications, review technical documentation and ensure compliance with specifications, procedures, ASME and BS standards. This CSWIP Welding Inspector role will suit a CSWIP 3.1 qualified inspector ready to develop, or a CSWIP 3.2 Senior Welding Inspector with advanced welding, metallurgy, audit and sign-off experience. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CSWIP Welding Inspector include: Maintain Quality and Welding Standards: Support or lead the implementation of welding and fabrication quality standards across the department Inspect Fabrications and Assemblies: Visually and dimensionally inspect tack-ups, weld set-ups and final fabrications for release Review and Raise NDT Reports: Create, evaluate and interpret inspection and non-destructive testing reports, identifying any non-conformances Maintain Welding Documentation: Complete weld maps, WPS documentation, welding technique records, history sheets and consumable control records Support Traceability and Compliance: Ensure product traceability, quality documentation and technical specification packs are accurate and audit-ready CSWIP 3.1 Level Duties: Carry out welding inspection, dimensional checks, documentation control and quality reporting under approved standards and procedures CSWIP 3.2 Senior Level Duties: Lead final inspection, sign-off completed work, review complex specifications and support improvements to welding procedures and controls Support Training and Competence: Assist with training, testing and assessment of welders, including equipment set-up, procedures and approved working ranges Conduct Audits and Checks: Carry out internal audits of welders, welding procedures and fabrication activities, recommending improvements where required Promote Safe Working Practices: Encourage safe systems of work, open communication and a target of zero lost time accidents Support Site Installations: Attend installation projects to assist with inspection duties when required CANDIDATE REQUIREMENTS ESSENTIAL CSWIP 3.1 qualification as a minimum, with applications also welcomed from CSWIP 3.2 Senior Welding Inspectors Previous experience working within welding inspection, fabrication, quality assurance or manufacturing environments Experience inspecting weld preparations, tack-ups, final fabrications and completed assemblies Ability to read and interpret technical fabrication drawings, specifications, standards and quality documentation Knowledge of welding procedures, weld defects, welder approvals, consumable control and fabrication inspection processes Understanding of ASME, BS Standards and relevant quality, welding and inspection requirements Experience using MS Word, Excel and other computer systems to complete inspection reports and quality records Methodical, accurate and safety-focused approach, with strong teamwork and communication skills DESIRABLE CSWIP 3.2 qualification or equivalent Senior Welding Inspector experience RWC approval or willingness to achieve Responsible Weld Coordinator status via TWI interview Experience working in a lead, supervisory or senior inspector role within a welding or fabrication environment Advanced knowledge of steel metallurgy, welding procedures, NDT methods and inspection sign-off requirements Experience preparing documentation, systems and inspection records for internal or external quality audits Training on welding equipment set-up, operation, troubleshooting and safe working practices BENEFITS 23 days annual holiday allowance plus Bank Holidays and Christmas Eve Birthday leave Wellbeing day Contributory pension scheme Life assurance Occupational health screening HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14840 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Great Yarmouth, Norfolk. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ

Bodyshop Quality Controller Location: Atherton Salary: £40,000 - £45,000 Basic Salary OTE £50,000 Job Type: Full-Time, Permanent Looking for a role where your experience is valued, your attention to detail makes a real impact, and your earning potential reflects your expertise? This is an excellent opportunity for an experienced Bodyshop Quality Controller to join a professional accident repair environment where quality comes first. With a competitive salary, achievable earning potential, and flexible start times, this role offers the work-life balance and stability many Bodyshop professionals are looking for. If you're currently working as a Senior Panel Beater, Paint Technician, Workshop Controller, or Quality Controller and want to take the next step in your career, this position provides the opportunity to work within a modern repair facility, ensuring every vehicle leaves the workshop to the highest possible standard. What's In It For You? Basic Salary of £40,000 - £45,000 depending on experience OTE of £50,000 Monday to Friday working pattern Flexible start times between 7:00am and 6:00pm 40-hour working week Permanent, full-time position Modern Bodyshop environment Career progression opportunities The Role As a Bodyshop Quality Controller, you will be responsible for ensuring all repairs are completed to the highest standards before vehicles are returned to customers. You will act as the final checkpoint within the repair process, maintaining quality, safety, and customer satisfaction. Key responsibilities include: Carrying out final quality inspections on completed vehicle repairs Checking panel, paint, and mechanical repairs against manufacturer and company standards Identifying and resolving quality concerns before vehicle handover Working closely with technicians, painters, and workshop management Ensuring all repairs meet safety and compliance requirements Maintaining accurate quality control records and documentation Supporting continuous improvement within the bodyshop operation Delivering exceptional standards of workmanship and presentation About You Previous experience as a Bodyshop Quality Controller, Workshop Controller, Senior Panel Beater, Paint Technician, or Accident Repair Quality Inspector Strong understanding of vehicle repair processes within a Bodyshop environment Excellent knowledge of panel, paint, and cosmetic repair standards High attention to detail and commitment to quality Ability to identify defects and implement corrective actions Strong communication and organisational skills Able to work effectively within a fast-paced workshop environment Full UK Driving Licence preferred Apply Today This is an excellent opportunity to join a well-established accident repair operation that values quality workmanship, offers long-term stability, and provides genuine opportunities for career development. If you're looking for a position where your experience and eye for detail will be recognised and rewarded, we'd love to hear from you. Apply now for immediate consideration. Job reference 54037.

Baltic Recruitment are delighted to be continuing our partnership with OsecoElfab, a global manufacturer specialising in engineered rupture discs and explosion venting solutions for high-hazard industrial environments to assist with their search for a Project Manager. Key Duties: Major Customer / EPC Project Delivery: Lead customer-facing major project execution from order acceptance through to delivery, documentation completion, shipment, and project close-out. Act as the primary project interface between OsecoElfab and the customer's project team, including EPC contractors, end-user representatives, inspectors, and appointed third-party stakeholders. Translate customer project requirements into clear internal actions, deliverables, schedules, responsibilities, and communication plans. Develop and maintain project plans, milestone schedules, action trackers, risk registers, communication records, and project status reports. Coordinate internal project activities across Commercial, Engineering, Quality, Supply Chain, Manufacturing, Planning, Logistics, and Finance. Ensure technical, quality, documentation, inspection, certification, testing, packaging, shipping, and commercial requirements are understood and delivered. Monitor project progress against customer milestones, contractual commitments, internal delivery dates, and agreed project deliverables. Identify project risks, constraints, and bottlenecks early, ensuring mitigation actions are agreed, owned, tracked, and escalated where required. Manage customer-facing project changes, including scope clarification, schedule impacts, documentation changes, inspection changes, and commercial variation requests. Support structured project reviews, customer progress meetings, internal project meetings, and formal project close-out reviews. Internal Cross-Functional Coordination: Drive alignment between internal functions to ensure customer project requirements are delivered in a coordinated and controlled manner. Work closely with Commercial and Sales teams to ensure customer commitments, contractual requirements, and project expectations are clearly understood. Coordinate Engineering deliverables, technical clarification responses, drawing approvals, design reviews, and customer documentation submissions. Work with Quality to ensure inspection and test plans, certification, compliance requirements, customer hold points, and final documentation packs are delivered on time. Partner with Supply Chain to monitor supplier deliverables, special material requirements, outsourced processes, and vendor documentation. Coordinate with Manufacturing and Planning to ensure production schedules, capacity constraints, testing requirements, and shipment dates are visible and managed. Ensure project actions are clearly assigned, followed up, and closed in line with agreed project timing. Customer Communication & Stakeholder Management: Provide clear, timely, and professional communication to customer project teams on project status, risks, actions, and required decisions. Prepare and issue customer-facing project reports, meeting agendas, minutes, action logs, and progress updates. Manage customer expectations around schedule, documentation, technical clarifications, inspection points, and delivery commitments. Act as the escalation point for project coordination issues, ensuring concerns are resolved quickly and constructively. Represent OsecoElfab in customer project meetings, internal leadership reviews, and cross-functional project forums. General Project Management: Support the delivery of capital machinery projects, internal operational improvement projects, and new product development projects as required. Apply consistent project management principles including scope definition, planning, governance, risk management, resource coordination, and performance tracking. Support the development and use of project management tools, dashboards, templates, stage-gate processes, and standard work. Contribute to continuous improvement of project delivery processes, project visibility, cross-functional accountability, and lessons learned. Project Governance, Reporting & Continuous Improvement: Maintain accurate project records, including project plans, schedules, risk registers, meeting minutes, action trackers, change logs, and customer communication records. Develop and maintain project KPIs relating to on-time delivery, milestone adherence, documentation performance, customer satisfaction, and issue resolution. Support project prioritisation, capacity visibility, and management reporting across the active project portfolio. Ensure lessons learned are captured and used to improve future project execution. Promote a culture of ownership, transparency, accountability, and disciplined project execution. The Package: Competitive salary on offer, depending on level of experience. 37.5 hours per week, Monday-Friday. Company pension scheme. Private health care. Life assurance. Quarterly bonus scheme potential. Additional benefits.

CMM Inspector Permanent Excellent Salary + Benefits Location: Gloucester Following continued growth and investment, our client is seeking an experienced CMM Inspector to join their Quality team.This is an excellent opportunity for a metrology professional with strong CMM programming and inspection experience to join a forward-thinking manufacturing business committed to quality, precision, and continuous improvement. Key Responsibilities Operate and program CMM equipment to inspect and measure manufactured components. Create, maintain, and optimise measurement routines for goods-in, in-process, and final inspection activities. Interpret engineering drawings, specifications, and GD&T requirements. Analyse measurement data and generate detailed dimensional inspection reports. Perform routine maintenance and calibration of CMM equipment. Ensure repeatability and reproducibility (R&R) of measurement systems. Raise and manage non-conformance reports (NCRs) where products or processes do not meet specification. Support Engineering and Production Engineering with new product introduction (NPI) activities. Collaborate with production, engineering, customers, and suppliers to resolve quality issues. Support continuous improvement initiatives to enhance quality, accuracy, and efficiency. Maintain accurate inspection records and ensure good housekeeping standards within inspection areas. Essential Experience / Skills / Qualifications Proven experience as a CMM Operator / CMM Inspector within a manufacturing environment. Experience with both manual and CNC CMM systems. Mitutoyo and/or Aberlink experience advantageous. Strong understanding of GD&T and engineering drawings. Fully competent using inspection equipment including micrometers, verniers, thread gauges, shadow graphs, and hardness testing equipment. Experience of MSA and GR&R methodologies. Excellent attention to detail and problem-solving ability. Good communication skills and ability to work effectively within a team. Ability to work independently and manage multiple priorities. Good understanding of quality systems, with ISO 9001 experience desirable. Desirable Experience / Skills Experience supporting NPI and engineering projects. Experience liaising directly with customers and suppliers on metrology and inspection matters. Knowledge of PMI, Ferritescope, Copper Sulphate testing, and gauge management. Experience within a precision engineering or high-specification manufacturing environment. Benefits Competitive Salary Company Pension Career Development Opportunities Ongoing Training and Development Opportunity to join a growing and innovative manufacturing business If you feel you're a good fit for this position, please click 'apply', email or call .Please note that we are unable to respond to every application. Should your application be successful, we will be in touch with you within 5-10 working days.

Quality Assurance Inspector - Aerospace Location: Eastleigh Duration : 6 months Hours : 35 per week Rate : Up to 45/hour Umbrella Inside IR35 We are seeking a detail-oriented QA Inspector to join our Production team. You will be responsible for inspecting incoming materials and components, ensuring compliance with quality standards, customer requirements, and regulatory specifications. Following product familiarisation training, the role may expand to include in-process and final product inspections. Key Responsibilities: Conduct inspections of materials and components using precision measuring equipment. Review engineering drawings, specifications, and quality documentation. Record inspection results and maintain accurate quality records. Identify and report non-conforming materials. Support quality investigations and corrective actions. Verify certifications, traceability records, and compliance documentation. Collaborate with production, engineering, and quality teams to resolve issues. About You: Experience in quality inspection, manufacturing, aerospace, or a similar environment. Ability to read and interpret engineering drawings and specifications. Competent in the use of precision measuring instruments. Strong attention to detail and excellent organisational skills. Good communication and basic IT skills. Desirable: Knowledge of AS9100, ISO 9001, GD&T, or IPC 610. Quality inspection certification or relevant technical qualification (NVQ Level 3 or equivalent). This is an excellent opportunity to join a growing team where quality, continuous improvement, and customer satisfaction are at the heart of everything we do. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

Are you an experienced Quality Inspector looking for more than just an inspection role? Kristek Precision is a growing AS9100-certified CNC machining business supplying Aerospace and Defence customers. As we continue to grow, we are looking for someone who wants to develop into a key member of our team and ultimately progress towards a Quality Manager position. Alongside inspection and CMM programming responsibilities, you will gain exposure to customer onboarding, quality systems, audits, supplier quality, continuous improvement, and AS9100 management. This role would suit an ambitious Quality Inspector, Senior Inspector, or Quality Engineer who is looking for genuine career progression and the opportunity to help shape the future of a growing business. Who We Are Kristek Precision, established in 1987, are a AS9100 accredited sub-contract CNC Machine shop based in Melksham. We provide production and batch work components to OEMs. We are Quality and People focused, and care about our employees and our customers. You can see more on our website Role Details + Duties Title : Quality Inspector Reports to : Managing Director Department : Quality + Inspection department Salary : 40,000 to 45,000 depending on experience Hours : 39 hours, Days, Early finish on a Friday (12pm) Pension : Auto-enrolment pension scheme Sick Pay : After 1 year of service Role Purpose Inspection and final inspection of machined components CMM Programming to verify parts, as well as using other inspection equipment FAIR reporting and dimension capturing Main Duties and Responsibilities Oversee all inspection activities (FAI, First Off, Final Inspection) Create and manage CMM programs Support NPI activities and complete FAI documentation Perform goods receipt inspection activities Verify supplier documentation and traceability Support quality release of finished goods Maintain part traceability and ownership of finished goods stock Create and maintain quality and inspection documentation Manage supplier quality, including performance, feedback, and delivery updates Maintain and calibrate inspection equipment Experience Required Inspection equipment GD&T / Drawing understanding Machining experience (desirable) Aerospace environment (desirable) If you have the skills and experience we are looking for, we look forward to hearing from you. Please note, Direct applications only. STRICTLY NO AGENCIES.

Metrology Engineer Deeside, North Wales Salary + Benefits + Overtime Permanent Full Time A growing precision engineering and inspection business is looking to appoint an experienced Metrology Engineer to join their team in Deeside. This is a great opportunity for someone with a strong background in dimensional inspection, CMM programming and quality control to work on complex, high-spec components for aerospace, defence, automotive and advanced manufacturing customers. You'll play a key role in ensuring parts meet exacting standards, supporting both internal production and customer projects, and working closely with engineering, manufacturing and quality teams. What you'll be doing Carrying out dimensional inspection of components and assemblies using CMMs, FARO Arms, laser scanning systems and conventional metrology equipment. Creating, editing and optimising CMM programs using software such as PC-DMIS, PolyWorks, MCOSMOS, Aberlink or similar. Reading and interpreting complex engineering drawings, CAD models and GD&T requirements. Producing accurate inspection reports, FAIRs and other quality documentation. Supporting root cause analysis and non-conformance investigations. Liaising with Quality, Manufacturing and Engineering teams to resolve dimensional and process issues. Completing first-off, in-process and final inspections. Supporting calibration and maintenance of metrology equipment. Contributing to continuous improvement across inspection and quality processes. What we're looking for Previous experience as a Metrology Engineer, CMM Programmer or Senior Inspector. Strong understanding of GD&T. Experience using CMM equipment and portable metrology systems. Ability to read complex engineering drawings with confidence. Background in precision engineering, aerospace, automotive or defence manufacturing. Strong problem-solving skills and a high level of attention to detail. Desirable experience 3D scanning or reverse engineering. Knowledge of AS9100 or ISO9001. CAD experience. Experience with PolyWorks or PC-DMIS. Qualifications Engineering apprenticeship, NVQ Level 3, HNC/HND or equivalent in Mechanical Engineering, Manufacturing or a related discipline. Metrology or quality-related certifications would be an advantage. What's on offer Competitive salary. Overtime opportunities. Pension scheme. Ongoing training and development. Modern inspection and manufacturing environment. Career progression within a growing business. 25 days holiday plus bank holidays. This would suit someone who enjoys working in a hands-on technical role where accuracy, quality and continuous improvement really matter. Please contact Coral at DCS to apply INDENG DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Stevenage Onsite Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quali click apply for full job details

CMM Inspector/ Programmer 15- 18 an hour + Technical Training + Internal Progression Opportunities + Varied Projects + Days based + Monday-Friday + Early Friday Finish + Work-life balance + Company Bonuses Workshop Based: Commutable from Gloucester, Cheltenham, Bristol, Swindon and Surrounding Areas Are you a CMM Inspector or Programmer looking for the excellent opportunity to be heavily invested in through additional technical training and career progression down the line, working alongside technical experts within a niche industry? On offer is the rare opportunity for technical industry training as well as working on a variety of sub-contract related specialist projects, all with a great work-life balance provided as part of a days-based shift with additional overtime on top to further bolster your earnings. This company have been established for over 6 decades and are specialists within a niche industry and are also regarded as a great place to work through their excellent staff retention and investments into their employees through training, progression and great work-life balance This role would suit a CMM Inspector or Programmer with Aberlink experience preferably looking for excellent investment from a long-standing company with progression opportunities as well as a great work-life balance. The Role: First off and Final technical inspections Non-conformance investigations Programming and operating Aberlink CMM Machinery Day based shift The Candidate: CMM Inspection, Operation with some form of Programming experience Looking for excellent long-term investment into their career To apply for this role or to be considered for further roles, please click "Apply Now" or contact Dyon Douglas-Whyte at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Role - Quality Inspector Location - Buckinghamshire Salary - £40,000 - £45,000 per annum We are seeking a Senior Quality Inspector to join a busy manufacturing business. This role involves carrying out detailed inspection activities while also supporting the inspection team and helping maintain high quality standards across production. Key Responsibilities Carry out first-off, in-process, and final inspections on manufactured components and assemblies Support and guide members of the inspection team where required Conduct NDT dye penetrant testing on parts and finished assemblies Produce First Article Inspection Reports (FAIRs) when required Program and operate CMM and Faro Arm measurement equipment Review engineering drawings and geometric tolerances to ensure parts meet specification Investigate and record non-conformances, assisting with root cause analysis and corrective actions Ensure inspection equipment is calibrated and maintained Inspect incoming components from suppliers as well as internally manufactured parts Maintain clear and accurate inspection records and documentation Liaise with internal departments and occasionally support customer-related quality queries Skills & Experience Solid experience within a quality inspection role in a manufacturing environment Level 2 certification in Dye Penetrant Testing (NDT) Practical experience operating CMM and Faro Arm equipment Strong understanding of engineering drawings and tolerancing Experience creating or supporting First Article Inspection Reports Comfortable using a variety of manual inspection tools and measurement equipment Good organisational skills and the ability to communicate effectively with colleagues across production, engineering, and quality teams

CMM Programmer / Quality Inspector (PC-DMIS) 40,000 - 45,000 Per Annum Overtime and benefits Basildon The Company A well established manufacturer of high quality precision machined components are looking for an experienced Quality Inspector / CMM Programmer to join their team. The company provide precision parts to a wide range of industries including aerospace and automotive in their modern and fast paced machining facility. The role - Quality inspector / CMM Programmer As a successful quality inspector / CMM Programmer you will be required to inspect precision engineered components. Duties - Quality inspector / CMM Programmer First off inspection and final inspection in a subcontract machining environment Operating/ Programming CMM - PC-DMIS Using inspection measurement equipment such as Micrometres, Verniers, Gauges Producing FAIR's, SPC, 5ys, NCR and KPI etc. reporting Meeting AS9100 and ISO 9001 requirements Requirements - CMM programming experience - PC-DMIS Experience using inspection measurement equipment A knowledge of inspection measurement equipment including a CMM. Good understanding of AS9100 and ISO 9001 requirements Ability to produce FAIR's, SPC, 5ys, NCR and KPI etc. reporting Subcontract machining environment experience Hours of Work Monday - Thursday 8:00am - 4:30pm Friday 8:00am - 12:30pm Salary 40,000 - 45,000 Per Annum Lots of overtime available at time and half Overtime Benefits Ongoing Career Development Opportunities and training provided Bereavement leave Company pension Cycle to work scheme Free, On-site parking

Your new company: Our client is a world leader in Power Conversion & Storage and provides electrification systems that are critical to their global customers' power and energy needs. They work with the world's major energy, maritime, and industrial organisations, enabling their transition to energy efficiency and decarbonisation, including through their specialist motors, drives, and control technologies. Having won major contracts in the UK defence sector, this company will work in partnership with 3 major global engineering organisations to deliver Your new role: Our client has an exciting opportunity for someone to join their team on a UK eyes-only project as a Quality Control Inspector working on challenging and exciting world-leading defence projects. The Quality Control Inspector will ensure that all Quality standards are achieved for both manufactured and purchased component products. You will provide the final point of inspection for the products, maintain reports and performance metrics and raise quality non-conformance reports (NCR), support the problem resolution process, including Containment, Root Cause Analysis, and Corrective and Preventative Actions. The successful candidate must possess the ability to solve simple problems, provide operable solutions, and act with minimal direction on their own initiative. Responsibilities: Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials. Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production. Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Documents inspection results by completing reports and logs; inputting data into a quality database (SAP). Keeps measurement equipment operating and manages calibration systems. Maintains a safe and healthy work environment by following standards and procedures, complying with legal regulations. Auditing manufacturing processes where required. Completing Non-Conforming Reports with root cause analysis. To work closely with production personnel, carrying out first off, final, and random inspections using CMM and FARO Mechanical inspection equipment. What you'll need to succeed: To be successful in the role, you will need proven experience as a quality inspector or in a relevant role with a keen eye for detail and a results-driven approach. If you are a traditional Quality Control professional with experience in Quality Inspection, then you are highly encouraged to apply.You will need to have practical experience with CMM measuring equipment and be able to reverse-check CAD models. Have familiarity with FARO laser measuring equipment on large heavy industrial components and a thorough knowledge of quality control standards and inspection methodologies for both electrical and mechanical systems. The ability to obtain UK security clearance to SC level is essential for this role What you get in return: Apart from an industry-leading benefits package that includes health insurance, income protection, life assurance, generous pension, hybrid working pattern and 26-day holidays plus bank holidays, you get the opportunity to deliver technology which will have a lasting national impact and get to work on projects that are cutting-edge and world-leading. You will get the chance to work with end clients and partner organisations on schemes that will redefine engineering in the defence sector. What you do now: Please get in touch with me directly for an informal conversation on Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

Quality Inspector As-Required 27.50 P/H Inside IR35 Job Description: Urgently seeking Quality Inspectors to provide on-demand / as-required support on a customer programme in Derby. Support will typically be requested with one week's notice and will run for periods of 2-3 weeks at a time. The desired candidates will have previous experience working in an Aerospace Inspection role, performing inspections to engineering drawings, customer purchase orders, industry standards, and specifications. Supporting the final inspection process, support will include: Visual inspection Dimensional inspection, using hand measurement equipment Review completeness of manufacturing documentation (e.g. CofCs, routers, etc.) Document inspection, preparing non-conformance reports as necessary Update customer systems Experience requirements: Demonstrate evidence of more than 2-years in the last 5-years of aerospace experience and poses experience of working within an engineering environment for a minimum of 3 years. Demonstrate knowledge of interpreting engineering drawings Demonstrate knowledge of geometric, dimensioning and tolerance Demonstrate evidence of product specific knowledge and experience in fabricated parts, which are welded and rivited Knowledge / experience of AS9100 and AS9102 standards highly advantageous Strong communications skills, both written and verbal Additional Requirements: To ensure access to technical data, we seek EU Nationals / Passport holders only. This activity is inside IR35 (Umbrella Company Required)

FABRICATION INSPECTOR - £39,520 per annum Knowledge of the following Working with plate form 10mm to 100mm Bridge fabrication Structural Fabrication Heavy beam and plate work. Job Summary: The Fabrication Inspector is responsible for ensuring that all fabricated components meet specified standards, drawings, codes, and customer requirements. This role involves inspecting materials, welds, dimensions, and finishes during and after the fabrication process to verify compliance with quality and safety standards. Responsibilities Perform in-process and final inspections of fabricated metal components and assemblies. Carry out NDE as required Following training Identify & record nonconforming products & oversee resolution as required Generate and maintain inspection documentation as necessary Ensure Inspection test plan is followed First off to final release inspection Inspection visits to sub suppliers Assist with customer visits Calibration / verification of equipment Maintaining welding parameters and welding stores Requirements Essential Ability to read engineering drawings, specification etc. Ability to use measuring equipment Tape measures etc. Ability to use Microsoft Office Ability to plan own workload Experience with QC of structural fabrications during all aspects of production. Familiar with ISO 9001 Driving licence recognised in the UK Good understanding of maths Good communicator Desirable PCN/CSWIP Visual qualification PCN/CSWIP MT qualification Working Conditions The role involves working in an industrial setting, which may include exposure to loud noise, dust, and varying weather conditions. Physical stamina is essential as the role involves manual labour and extended periods of standing. Pay £19.00 p/h + overtime Saturday x 1.5 time Sunday Double time Monday to Thursday 6am-2:30pm & Friday 6am-1pm 39 hour week with overtime available 24 days annual leave + bank holidays

Masting Operative Jobs in Newcastle at Stannah Join Our Team! We have an exciting opportunity for a Masting Operative to join Stannah based at Newburn. This job will involve ensuring all products meet 100% Right First Time (RFT) standards before being delivered to the end customer. You will be responsible for inspecting, finishing, and verifying that the product meets all technical and cosmetic specifications. As the Masting Operative, you will work 37 hours per week Monday to Thursday 06:15 to 16:00. This is a permanent contract. This is a great opportunity for someone with a keen eye for detail and a passion for product quality to join a supportive and safety-focused team. To be successful as the Masting Operative it is essential that you have previous experience in: Interpreting and working from technical drawings Finishing and inspection processes using hand/air tools Experience in working to fine tolerances and at height, or within a manufacturing or engineering environment, would be desirable. Masting Operative Responsibilities: Completing jobs to specification and within agreed timelines Reading and interpreting product drawings accurately Ensuring delivery of products meets QCD requirements Performing polishing and cosmetic finishing using air tools Supporting continuous improvement and cross-skilling efforts Masting Operative Requirements: Ability to plan, prioritise, and organise workloads effectively Skilled in interpreting and reporting technical data Comfortable working at height and following safety procedures Strong communication and team collaboration skills If you have previous experience working as a Final Process Checking Operator, Product Inspector, Quality Checker, or a similar role and are looking for a Final Process Checking Operator job in Newcastle, please click the "apply now" button or contact us for further information. Company Information: Stannah is a family-owned manufacturing and engineering company. Our products move people and goods in and around homes and buildings. We make life easier for people. We do this by improving access for greater convenience and independence. Joseph Stannah founded the business in 1867. A lot has happened since then and today Stannah is a global business. The family is in their fifth generation and plays a hands-on role in running the business. Most people know us for our stairlifts. Our range of products includes lifts, escalators, and homelifts. We also provide maintenance and repair services. Stannah Group is an equal opportunities employer. We welcome and encourage applications from candidates of all backgrounds, identities, and abilities. We are a Disability Confident Committed Employer. We treat all our job applicants fairly and with respect. Our employees are the heart of our business. We take great care to create a working environment where everyone feels valued. Join our team and be a part of our diverse and inclusive community! Benefits Include: Competitive Salary, paid on a monthly basis Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits 25 days holiday, plus bank holidays Holiday scheme to buy extra days' annual leave Pension Scheme. Matched contribution/salary sacrifice SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more Life Assurance Scheme Long Service award scheme, with holiday benefit Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more Employee Assistance Programme. A workplace initiative to support and enhance well-being Enhanced maternity and paternity provision Free parking We reserve the right to close this vacancy early if we receive high numbers of applications for the role. PandoLogic.

Quality Inspector - Aerospace (Manual Inspection) Location: South West UK (On-site) Salary: 30,000 - 35,000 + benefits I'm currently recruiting for a leading aerospace precision engineering business who are looking for a Quality Inspector to join their established team. This role is primarily manual inspection, ensuring aerospace components meet tight tolerances and customer specifications. The Role: Carry out first-off, in-process, and final inspections on precision-machined aerospace components. Use a wide range of manual inspection equipment (micrometers, verniers, gauges, shadowgraphs, height gauges, etc.) to verify quality. Operate CMMs for measurement and inspection when required. Interpret engineering drawings and specifications, including GD&T. Record inspection results accurately and maintain full traceability of documentation. Support FAIR (First Article Inspection Report) activity when needed. Collaborate with machinists and engineers to resolve quality issues at source. What You'll Need: Experience as a Quality Inspector within aerospace, precision engineering, or a similar high-precision industry. Strong skills in manual inspection using micrometers, verniers, and gauges. Ability to operate CMMs (basic programming desirable but not essential). Solid understanding of engineering drawings and geometric tolerancing (GD&T). Excellent attention to detail and commitment to quality. Desirable: Aerospace or defence sector background. Knowledge of FAIRs and AS9100 standards. Apprenticeship or qualifications in mechanical/precision engineering. Hours & Benefits: 37 hours per week (Mon-Thu 07:30-16:00, Fri 07:30-12:30). 25 days holiday + bank holidays. Company pension scheme, health & wellbeing plan, life insurance. Cycle-to-work scheme. This is an excellent opportunity for a hands-on Quality Inspector with strong manual inspection skills to join a respected aerospace manufacturer. The company offers stability, long-term career prospects, and a competitive salary package. If you're an experienced inspector looking for your next move, apply today or get in touch for more details.