M&E Senior Project manager Sector: Data Centres Client side Location: Newport Great opportunity to work on multiple projects in a live data centre ensuring project are managed and handed back in a timely manner. As the post holder, you will be expected to have expertise in working within mission critical facilities such as complex Tier 3 or above Data Centres. A definitive understanding of building services systems, contingency procedures and be proactive in passing on this knowledge through development of the engineering team. The Project Manager will be ensuring the required standards are met and exceeded when operating critical infrastructure and reducing the down time on Projects within that operating paradigm To ensure the highest engineering standards are achieved and maintained at all times by both 3rd party specialist and engineering staff alike. To oversee competencies of 3rd party specialist and engineering staff, train, coach and mentor the engineering team to ensure maximum critical infrastructure uptime. Act as a champion for health and safety on the account and work with the local team, our vendors, and our client to maintain the highest standards. Key Tasks Ensure compliance with Client procedures and Client Risk Management Framework, through the effective management of SOP, MOP and EOP. Operate all systems within the buildings in a competent, effective and efficient manner (including HV isolations/operations). Having due regard to business risk and energy use. Making recommendations for improvement and providing concise technical reports when required. Working closely with the engineering team you should ensure that for Specialist Sub Contractors visits have been prepared and approved Standard Operating Procedures/ MOP/PTW/ Client change requests. Ensure that Specialist Sub Contractor worksheets are signed off where necessary, that quality of work has been inspected and recommendations are communicated by the Site Personnel. To provide technical support to the engineering team, and take ownership of Incident Reports and After Incident Reviews when required. Take a leading role in the technical development of all members of the engineering team. Working in partnership with Client stakeholders to drive improvements engineering competency. Attend weekly operations meetings, client meetings as requested, in conjunction with the Account Manager. Ensure the asset database and electronic O&M systems are correct and up to date. Drive a culture within the team, where energy saving and environmental sustainability is a natural behaviour. Production of quotation for critical infrastructure enhancement / remedial works Project management oversight, Operation and trouble shooting for the following: HV & LV Electrical Systems Building management system. Lighting Control system. Air conditioning System, DFU's, FCU's, AHU's and ACU's. Variable speed drives. Boilers and heating system. DRUPS and ancillary components. Single phase and three phase motors. Emergency lighting. Personal Qualities: Minimum of 5 years relevant experience in Data Centre or Critical Environment project delivery A nationally recognised M&E qualification to at least HND standard or 10 year's relevant experience Strong communication skills and the ability to deal with all levels of staff. Ability to lead, motivate and direct a small team of technicians/operatives. Proactive in achieving the highest standard of operation. Have good IT and report writing skills. Your expert recruitment consultant is Trevor Parsons, call today on (phone number removed) or email (url removed) Eden Brown is committed to equality in the workplace and is an equal opportunity employer. Eden Brown is acting as an Employment Business in relation to this vacancy.
Jun 26, 2026
Contractor
M&E Senior Project manager Sector: Data Centres Client side Location: Newport Great opportunity to work on multiple projects in a live data centre ensuring project are managed and handed back in a timely manner. As the post holder, you will be expected to have expertise in working within mission critical facilities such as complex Tier 3 or above Data Centres. A definitive understanding of building services systems, contingency procedures and be proactive in passing on this knowledge through development of the engineering team. The Project Manager will be ensuring the required standards are met and exceeded when operating critical infrastructure and reducing the down time on Projects within that operating paradigm To ensure the highest engineering standards are achieved and maintained at all times by both 3rd party specialist and engineering staff alike. To oversee competencies of 3rd party specialist and engineering staff, train, coach and mentor the engineering team to ensure maximum critical infrastructure uptime. Act as a champion for health and safety on the account and work with the local team, our vendors, and our client to maintain the highest standards. Key Tasks Ensure compliance with Client procedures and Client Risk Management Framework, through the effective management of SOP, MOP and EOP. Operate all systems within the buildings in a competent, effective and efficient manner (including HV isolations/operations). Having due regard to business risk and energy use. Making recommendations for improvement and providing concise technical reports when required. Working closely with the engineering team you should ensure that for Specialist Sub Contractors visits have been prepared and approved Standard Operating Procedures/ MOP/PTW/ Client change requests. Ensure that Specialist Sub Contractor worksheets are signed off where necessary, that quality of work has been inspected and recommendations are communicated by the Site Personnel. To provide technical support to the engineering team, and take ownership of Incident Reports and After Incident Reviews when required. Take a leading role in the technical development of all members of the engineering team. Working in partnership with Client stakeholders to drive improvements engineering competency. Attend weekly operations meetings, client meetings as requested, in conjunction with the Account Manager. Ensure the asset database and electronic O&M systems are correct and up to date. Drive a culture within the team, where energy saving and environmental sustainability is a natural behaviour. Production of quotation for critical infrastructure enhancement / remedial works Project management oversight, Operation and trouble shooting for the following: HV & LV Electrical Systems Building management system. Lighting Control system. Air conditioning System, DFU's, FCU's, AHU's and ACU's. Variable speed drives. Boilers and heating system. DRUPS and ancillary components. Single phase and three phase motors. Emergency lighting. Personal Qualities: Minimum of 5 years relevant experience in Data Centre or Critical Environment project delivery A nationally recognised M&E qualification to at least HND standard or 10 year's relevant experience Strong communication skills and the ability to deal with all levels of staff. Ability to lead, motivate and direct a small team of technicians/operatives. Proactive in achieving the highest standard of operation. Have good IT and report writing skills. Your expert recruitment consultant is Trevor Parsons, call today on (phone number removed) or email (url removed) Eden Brown is committed to equality in the workplace and is an equal opportunity employer. Eden Brown is acting as an Employment Business in relation to this vacancy.
Dairy Technical Manager - Automated Milking Systems & Technical Support This role is not eligible for UK Visa Sponsorship - the successful applicant must have existing Right to Work in the UK. Are you an experienced agricultural engineer or dairy equipment specialist looking to work with industry-leading robotic milking technology? Do you enjoy diagnosing and resolving complex electrical, mechanical, hydraulic, pneumatic, and software issues in the field? Would you like a highly autonomous technical role where you can support cutting-edge dairy automation systems while helping farmers maximise performance and reliability? Location of the Job: United Kingdom & Ireland (Home-Based with Extensive Travel) Salary & Benefits Package: Competitive Salary (depending on experience) Company vehicle Laptop and mobile phone Comprehensive training programme Long-term career development opportunities High degree of autonomy and responsibility Opportunity to work with market-leading automated milking technology On-call allowance and support package About the Company: Our client is a globally recognised manufacturer of advanced dairy equipment and automated milking systems, with more than 85 years of experience supporting dairy farmers worldwide. The business is committed to delivering innovative solutions that balance technology, animal welfare, and farm profitability. Due to continued growth within the automated milking sector, an exciting opportunity has arisen for a Dairy Technical Manager to support dealers and dairy farmers across the United Kingdom and Ireland. Dairy Technical Manager - The Job Role Details: An exciting opportunity has arisen for a Dairy Technical Manager to provide technical support, training, commissioning, and troubleshooting for advanced automated milking systems and associated technologies. Working closely with dealers, dairy farmers, and internal technical teams, you will play a key role in ensuring successful installations, optimising system performance, and supporting the ongoing development of automated milking technologies. This is a highly technical and customer-facing role requiring strong knowledge of dairy farming operations alongside expertise in electrical, mechanical, hydraulic, pneumatic, electronic, and software-based systems. The successful candidate will support new installations, provide technical training, and help deliver industry-leading service standards across the region. Key Responsibilities: Provide technical support to dealers, customers, and dairy farmers on automated and conventional milking systems Assist with installation, commissioning, and optimisation of robotic milking systems Deliver technical training to dealer technicians and end users Troubleshoot complex electrical, mechanical, software, networking, hydraulic, and pneumatic issues Support ongoing system performance monitoring and operational improvements Work closely with dealers to ensure effective maintenance and servicing of installations Participate in product development feedback and continuous improvement initiatives Accurately document technical support activities and commissioning work completed Support customers during critical operational periods and participate in an on-call rota when required Build strong relationships with dealers and customers, ensuring excellent levels of technical service and customer satisfaction Travel extensively throughout the UK and Ireland, with occasional international travel as required Essential Candidate Skills & Experience: Experience within dairy farming, dairy equipment, agricultural engineering, robotics, automation, or technical field service support Strong understanding of dairy farm operations and herd management systems Technical knowledge of electrical, mechanical, hydraulic, pneumatic, and automation systems Experience diagnosing and resolving complex technical issues in the field Strong communication and training skills with the ability to support a range of stakeholders Excellent problem-solving and analytical abilities Computer literacy and confidence using software, networking, and digital technologies Ability to work independently and manage a varied workload across multiple sites Full UK driving licence and willingness to travel extensively Fluent English language skills Desirable: Previous experience supporting automated milking systems or robotic technologies Knowledge of dairy herd management software platforms Additional language skills, particularly French or German Experience delivering technical training programmes Previous dealer support or agricultural machinery technical support experience Working Hours: Full-time position with flexibility required to support customer operations. Regular travel throughout the UK and Ireland is expected, with participation in an on-call support rota. How to Apply: Please click on the "apply now" button. As we are a specialist recruitment business within the Agricultural and Farming industry, all applicants must hold an NVQ Level 2, Scottish NVQ Level 2, or an equivalent qualification relevant to the role. Key Words: Dairy Technical Manager, Agricultural Engineer, Dairy Engineer, Service Engineer, Robotic Milking Systems, Automated Milking Systems, Dairy Technology, Agricultural Machinery, Field Service Engineer, Technical Support Engineer, Dairy Equipment, Milking Equipment, Agricultural Automation, Livestock Technology, Dairy Farming Jobs, Engineering Jobs UK We thank all applicants who apply for this role; however, only those shortlisted for interview will be contacted. All applications will be handled in strict confidence and personal details will not be shared without prior consent. About Us Established in 2013, Agricultural and Farming Jobs provide expert recruitment, headhunting, and job advertising services across agriculture, horticulture, food and fresh produce, veterinary, animal health, agrochemicals, machinery, technical and engineering, and specialist education sectors across the UK and internationally.
Jun 23, 2026
Full time
Dairy Technical Manager - Automated Milking Systems & Technical Support This role is not eligible for UK Visa Sponsorship - the successful applicant must have existing Right to Work in the UK. Are you an experienced agricultural engineer or dairy equipment specialist looking to work with industry-leading robotic milking technology? Do you enjoy diagnosing and resolving complex electrical, mechanical, hydraulic, pneumatic, and software issues in the field? Would you like a highly autonomous technical role where you can support cutting-edge dairy automation systems while helping farmers maximise performance and reliability? Location of the Job: United Kingdom & Ireland (Home-Based with Extensive Travel) Salary & Benefits Package: Competitive Salary (depending on experience) Company vehicle Laptop and mobile phone Comprehensive training programme Long-term career development opportunities High degree of autonomy and responsibility Opportunity to work with market-leading automated milking technology On-call allowance and support package About the Company: Our client is a globally recognised manufacturer of advanced dairy equipment and automated milking systems, with more than 85 years of experience supporting dairy farmers worldwide. The business is committed to delivering innovative solutions that balance technology, animal welfare, and farm profitability. Due to continued growth within the automated milking sector, an exciting opportunity has arisen for a Dairy Technical Manager to support dealers and dairy farmers across the United Kingdom and Ireland. Dairy Technical Manager - The Job Role Details: An exciting opportunity has arisen for a Dairy Technical Manager to provide technical support, training, commissioning, and troubleshooting for advanced automated milking systems and associated technologies. Working closely with dealers, dairy farmers, and internal technical teams, you will play a key role in ensuring successful installations, optimising system performance, and supporting the ongoing development of automated milking technologies. This is a highly technical and customer-facing role requiring strong knowledge of dairy farming operations alongside expertise in electrical, mechanical, hydraulic, pneumatic, electronic, and software-based systems. The successful candidate will support new installations, provide technical training, and help deliver industry-leading service standards across the region. Key Responsibilities: Provide technical support to dealers, customers, and dairy farmers on automated and conventional milking systems Assist with installation, commissioning, and optimisation of robotic milking systems Deliver technical training to dealer technicians and end users Troubleshoot complex electrical, mechanical, software, networking, hydraulic, and pneumatic issues Support ongoing system performance monitoring and operational improvements Work closely with dealers to ensure effective maintenance and servicing of installations Participate in product development feedback and continuous improvement initiatives Accurately document technical support activities and commissioning work completed Support customers during critical operational periods and participate in an on-call rota when required Build strong relationships with dealers and customers, ensuring excellent levels of technical service and customer satisfaction Travel extensively throughout the UK and Ireland, with occasional international travel as required Essential Candidate Skills & Experience: Experience within dairy farming, dairy equipment, agricultural engineering, robotics, automation, or technical field service support Strong understanding of dairy farm operations and herd management systems Technical knowledge of electrical, mechanical, hydraulic, pneumatic, and automation systems Experience diagnosing and resolving complex technical issues in the field Strong communication and training skills with the ability to support a range of stakeholders Excellent problem-solving and analytical abilities Computer literacy and confidence using software, networking, and digital technologies Ability to work independently and manage a varied workload across multiple sites Full UK driving licence and willingness to travel extensively Fluent English language skills Desirable: Previous experience supporting automated milking systems or robotic technologies Knowledge of dairy herd management software platforms Additional language skills, particularly French or German Experience delivering technical training programmes Previous dealer support or agricultural machinery technical support experience Working Hours: Full-time position with flexibility required to support customer operations. Regular travel throughout the UK and Ireland is expected, with participation in an on-call support rota. How to Apply: Please click on the "apply now" button. As we are a specialist recruitment business within the Agricultural and Farming industry, all applicants must hold an NVQ Level 2, Scottish NVQ Level 2, or an equivalent qualification relevant to the role. Key Words: Dairy Technical Manager, Agricultural Engineer, Dairy Engineer, Service Engineer, Robotic Milking Systems, Automated Milking Systems, Dairy Technology, Agricultural Machinery, Field Service Engineer, Technical Support Engineer, Dairy Equipment, Milking Equipment, Agricultural Automation, Livestock Technology, Dairy Farming Jobs, Engineering Jobs UK We thank all applicants who apply for this role; however, only those shortlisted for interview will be contacted. All applications will be handled in strict confidence and personal details will not be shared without prior consent. About Us Established in 2013, Agricultural and Farming Jobs provide expert recruitment, headhunting, and job advertising services across agriculture, horticulture, food and fresh produce, veterinary, animal health, agrochemicals, machinery, technical and engineering, and specialist education sectors across the UK and internationally.
Baltic Recruitment Limited
Peterlee, County Durham
Baltic Recruitment are delighted to be supporting ZF, a global leader in cutting-edge automotive electronics manufacturing, with their search for a Multi-Skilled Maintenance Technician. Key Duties: All duties concerned with the installation, repair, development, and maintenance of any machinery / assembly line equipment. Daily reporting of work completed. Spare parts stock control and the reporting of requirements. Cleanliness of the workshop / equipment and tools. Documenting and investigating root causes of machine breakdown online sheets. Exercise high standards of H&S at all times, including Environmental Safety Awareness. Key Requirements: ONC / HNC. 2-5 years in a similar role, ideally automotive and electronics experience. Electrical / Mechanical Fault finding skills. Good understanding of root cause analysis. PC literate like MS Office (Excel, Word). Team Player with positive 'go see' attitude being able to work under own initiative. Good Communication skills as well as interpersonal skills and a willingness to work with people at all levels of an organisation. Strong analytical and problem-solving skills. The Package: £50,203.52 per annum. 3 shift rotating pattern: Earlies/Lates/Nights. Pension System. 2x Life Assurance cover. Health Cashplan.
Jun 20, 2026
Full time
Baltic Recruitment are delighted to be supporting ZF, a global leader in cutting-edge automotive electronics manufacturing, with their search for a Multi-Skilled Maintenance Technician. Key Duties: All duties concerned with the installation, repair, development, and maintenance of any machinery / assembly line equipment. Daily reporting of work completed. Spare parts stock control and the reporting of requirements. Cleanliness of the workshop / equipment and tools. Documenting and investigating root causes of machine breakdown online sheets. Exercise high standards of H&S at all times, including Environmental Safety Awareness. Key Requirements: ONC / HNC. 2-5 years in a similar role, ideally automotive and electronics experience. Electrical / Mechanical Fault finding skills. Good understanding of root cause analysis. PC literate like MS Office (Excel, Word). Team Player with positive 'go see' attitude being able to work under own initiative. Good Communication skills as well as interpersonal skills and a willingness to work with people at all levels of an organisation. Strong analytical and problem-solving skills. The Package: £50,203.52 per annum. 3 shift rotating pattern: Earlies/Lates/Nights. Pension System. 2x Life Assurance cover. Health Cashplan.
COMPANY OVERVIEW A leading UK-wide facilities management provider is continuing to strengthen its Fire & Security division across the South region. The organisation delivers specialist technical services to major retail and commercial clients, supporting large-scale estates with planned and reactive maintenance solutions. With a strong national presence and a reputation for operational excellence, the business provides fully integrated maintenance services across fire safety, security systems, electrical, and building compliance disciplines. The company is recognised for its structured processes, technical expertise, and long-standing client partnerships. An opportunity has arisen for a Fire & Security Technician to join the Carlisle region, delivering maintenance and compliance services across designated retail stores. COMPANY USP National Coverage with Dedicated Regional Support Operating across multiple UK regions while maintaining strong local engineering teams. Specialist Technical Expertise Delivering compliance-led fire and security solutions in line with current British Standards and industry regulations. Structured Service Delivery Model Clear KPIs, response times, and performance metrics supported by digital reporting systems. Long-Term Client Partnerships Supporting large, multi-site commercial portfolios with consistent, high-quality service. JOB PURPOSE To act as the technical specialist for designated stores, delivering first-call response and maintenance across Fire Alarms, CCTV, EAS, Access Control, PA systems, and Automatic Pedestrian Gates, ensuring full compliance and minimal disruption to store operations. JOB DUTIES Carry out planned preventative maintenance (PPM) and reactive repairs within agreed KPIs including response, first fix, and closure targets. Conduct Fire Alarm PPM visits in accordance with BS5839 standards. Ensure all Fire Alarm systems remain compliant with BS 5839 and report defects where necessary. Respond promptly to service calls from the Helpdesk during working hours and whilst on call. Identify non-repairable faults and recommend appropriate corrective actions. Order replacement parts in line with company procedures and ensure timely installation upon delivery. Complete all documentation and digital reports accurately in line with company standards. Liaise with site Duty Managers during each visit to communicate repair updates and operational risks. Carry out surveys and technical reports as required by management. Ensure all works are completed in line with Health & Safety policies and company procedures. Maintain tools and equipment to ensure readiness and compliance at all times. Attend relevant training courses and complete mandatory online training modules. Comply with all statutory regulations and company Health & Safety requirements. JOB RESPONSIBILITIES Represent the company in a professional and competent manner at all times. Build and maintain strong working relationships with client site teams and colleagues. Deliver work efficiently and cost-effectively while maintaining high technical standards. Ensure compliance with contractual obligations and service level agreements. Work collaboratively with internal teams to meet operational targets and service delivery standards. Demonstrate flexibility to support operational requirements and on-call rota participation. SKILLS & EXPERIENCE REQUIRED GCSE standard education or equivalent. Electrical competency qualification (NVQ or City & Guilds) desirable. Proven experience working with Fire Alarm systems and CCTV (IP and analogue). Full UK driving licence. Ability to work independently with minimal supervision. Good written and verbal communication skills. Customer-focused approach with a professional manner. PC literate and confident using digital reporting systems. Ability to distinguish colours as required for electrical/electronic maintenance work. Willingness to work flexible hours and participate in on-call duties. SALARY & BENEFITS £39,199 basic salary 42.5 hours per week, full-time permanent role 33 Days Holiday Company vehicle provided + Fuel Card Company pension scheme Private healthcare On-call rota participation (details discussed at interview) Ongoing training and development opportunities Supportive team environment within a national organisation Please call Jason on (phone number removed) and please apply to this advert to prompt a call back.
Jun 20, 2026
Full time
COMPANY OVERVIEW A leading UK-wide facilities management provider is continuing to strengthen its Fire & Security division across the South region. The organisation delivers specialist technical services to major retail and commercial clients, supporting large-scale estates with planned and reactive maintenance solutions. With a strong national presence and a reputation for operational excellence, the business provides fully integrated maintenance services across fire safety, security systems, electrical, and building compliance disciplines. The company is recognised for its structured processes, technical expertise, and long-standing client partnerships. An opportunity has arisen for a Fire & Security Technician to join the Carlisle region, delivering maintenance and compliance services across designated retail stores. COMPANY USP National Coverage with Dedicated Regional Support Operating across multiple UK regions while maintaining strong local engineering teams. Specialist Technical Expertise Delivering compliance-led fire and security solutions in line with current British Standards and industry regulations. Structured Service Delivery Model Clear KPIs, response times, and performance metrics supported by digital reporting systems. Long-Term Client Partnerships Supporting large, multi-site commercial portfolios with consistent, high-quality service. JOB PURPOSE To act as the technical specialist for designated stores, delivering first-call response and maintenance across Fire Alarms, CCTV, EAS, Access Control, PA systems, and Automatic Pedestrian Gates, ensuring full compliance and minimal disruption to store operations. JOB DUTIES Carry out planned preventative maintenance (PPM) and reactive repairs within agreed KPIs including response, first fix, and closure targets. Conduct Fire Alarm PPM visits in accordance with BS5839 standards. Ensure all Fire Alarm systems remain compliant with BS 5839 and report defects where necessary. Respond promptly to service calls from the Helpdesk during working hours and whilst on call. Identify non-repairable faults and recommend appropriate corrective actions. Order replacement parts in line with company procedures and ensure timely installation upon delivery. Complete all documentation and digital reports accurately in line with company standards. Liaise with site Duty Managers during each visit to communicate repair updates and operational risks. Carry out surveys and technical reports as required by management. Ensure all works are completed in line with Health & Safety policies and company procedures. Maintain tools and equipment to ensure readiness and compliance at all times. Attend relevant training courses and complete mandatory online training modules. Comply with all statutory regulations and company Health & Safety requirements. JOB RESPONSIBILITIES Represent the company in a professional and competent manner at all times. Build and maintain strong working relationships with client site teams and colleagues. Deliver work efficiently and cost-effectively while maintaining high technical standards. Ensure compliance with contractual obligations and service level agreements. Work collaboratively with internal teams to meet operational targets and service delivery standards. Demonstrate flexibility to support operational requirements and on-call rota participation. SKILLS & EXPERIENCE REQUIRED GCSE standard education or equivalent. Electrical competency qualification (NVQ or City & Guilds) desirable. Proven experience working with Fire Alarm systems and CCTV (IP and analogue). Full UK driving licence. Ability to work independently with minimal supervision. Good written and verbal communication skills. Customer-focused approach with a professional manner. PC literate and confident using digital reporting systems. Ability to distinguish colours as required for electrical/electronic maintenance work. Willingness to work flexible hours and participate in on-call duties. SALARY & BENEFITS £39,199 basic salary 42.5 hours per week, full-time permanent role 33 Days Holiday Company vehicle provided + Fuel Card Company pension scheme Private healthcare On-call rota participation (details discussed at interview) Ongoing training and development opportunities Supportive team environment within a national organisation Please call Jason on (phone number removed) and please apply to this advert to prompt a call back.
Randstad Construction & Property
Peterborough, Cambridgeshire
Electronics & Instrumentation TechnicianLocation: Peterborough Contract Duration: 12 Months Hours: Monday - Thursday (8:00 AM - 4:00 PM), Friday (8:00 AM - 3:30 PM) Pay Rate: Up to £19.48 per hour (Equivalent to a £37,900 salary) Position OverviewWe are seeking a skilled and proactive Electronics & Instrumentation Technician to join our Test & Development Engineering team. Operating in a fast-paced, professional technical environment, you will provide expert technical and calibration support for our advanced research and development facility. This role offers an exciting variety of responsibilities, giving you the opportunity to work both independently and collaboratively to maintain, upgrade, and commission multi-million-pound test facilities. Key ResponsibilitiesPanel Building & Upgrades: Assemble and upgrade instrumentation panels to specified standards. Diagnostics & Troubleshooting: Perform comprehensive electronic diagnostics using advanced equipment and instrumentation. Maintenance & Calibration: Execute Total Preventative Maintenance (TPM) and calibration routines for test cells, associated equipment, and interface harnesses. Support & Maintenance: Maintain, enhance, and upgrade test rigs, and provide prompt, effective first-line breakdown support. Documentation: Maintain accurate records, follow standard work instructions, and document project progress. Skills & Experience RequiredWe are looking for a combination of the skills below. You do not need to possess every single one to be considered. Essential:Background: A technical apprenticeship (Level 3) with an electrical/electronic bias OR strong, hands-on industry experience without a formal apprenticeship. Technical Skills: Proven experience in the build/manufacture of instrumentation panels, alongside calibration and fault-finding of precision instrumentation. Schematics: Ability to read and interpret electronic design schematics, as well as hydraulic, pneumatic, and electrical drawings. Safety: A strong commitment to health and safety standards and regulations. Desirable (But Not Essential):Multi-skilled in both Electrical and Electronics disciplines. Prior experience working within an engine test cell environment. Experience with Root Cause Analysis (RCA) techniques. BS7671 IET 18th Edition Electrical Regulations. HNC or equivalent in an electronic/electrical discipline. An aerospace or military/ex-forces background (highly valued for its focus on precision and quality standards). Key CompetenciesHigh attention to detail and a strong commitment to quality. Excellent communication skills and the ability to collaborate within multidisciplinary teams. Adaptability in a dynamic, fast-paced technical environment. A proactive attitude with the initiative to work independently when required. Apply today! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 20, 2026
Contractor
Electronics & Instrumentation TechnicianLocation: Peterborough Contract Duration: 12 Months Hours: Monday - Thursday (8:00 AM - 4:00 PM), Friday (8:00 AM - 3:30 PM) Pay Rate: Up to £19.48 per hour (Equivalent to a £37,900 salary) Position OverviewWe are seeking a skilled and proactive Electronics & Instrumentation Technician to join our Test & Development Engineering team. Operating in a fast-paced, professional technical environment, you will provide expert technical and calibration support for our advanced research and development facility. This role offers an exciting variety of responsibilities, giving you the opportunity to work both independently and collaboratively to maintain, upgrade, and commission multi-million-pound test facilities. Key ResponsibilitiesPanel Building & Upgrades: Assemble and upgrade instrumentation panels to specified standards. Diagnostics & Troubleshooting: Perform comprehensive electronic diagnostics using advanced equipment and instrumentation. Maintenance & Calibration: Execute Total Preventative Maintenance (TPM) and calibration routines for test cells, associated equipment, and interface harnesses. Support & Maintenance: Maintain, enhance, and upgrade test rigs, and provide prompt, effective first-line breakdown support. Documentation: Maintain accurate records, follow standard work instructions, and document project progress. Skills & Experience RequiredWe are looking for a combination of the skills below. You do not need to possess every single one to be considered. Essential:Background: A technical apprenticeship (Level 3) with an electrical/electronic bias OR strong, hands-on industry experience without a formal apprenticeship. Technical Skills: Proven experience in the build/manufacture of instrumentation panels, alongside calibration and fault-finding of precision instrumentation. Schematics: Ability to read and interpret electronic design schematics, as well as hydraulic, pneumatic, and electrical drawings. Safety: A strong commitment to health and safety standards and regulations. Desirable (But Not Essential):Multi-skilled in both Electrical and Electronics disciplines. Prior experience working within an engine test cell environment. Experience with Root Cause Analysis (RCA) techniques. BS7671 IET 18th Edition Electrical Regulations. HNC or equivalent in an electronic/electrical discipline. An aerospace or military/ex-forces background (highly valued for its focus on precision and quality standards). Key CompetenciesHigh attention to detail and a strong commitment to quality. Excellent communication skills and the ability to collaborate within multidisciplinary teams. Adaptability in a dynamic, fast-paced technical environment. A proactive attitude with the initiative to work independently when required. Apply today! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
2 x Contract positions Outside IR35 On site We are seeking an experienced Test Technician to join their team on a contract basis. T Key Responsibilities: Product (software, hardware and mechanics) assembly, troubleshooting, and testing Executing tests and writing reports Designing, constructing, maintaining, and calibrating test equipment Maintaining a clean, tidy, and safe working environment Implementing continuous improvement practices for work processes and the working environment Identifying and managing continuous improvement of equipment and test methods Assisting development engineers with product analysis, including FMEAs and design reviews Ensuring work adheres to company quality standards and national/international standards Ensuring that all work is carried out safely Job Requirements: Understanding of electronic circuits, with experience in designing simple circuits Experience in assembling, troubleshooting, and testing electronic products Proficiency with electronic test equipment, including DVMs, oscilloscopes, and data loggers Ability to perform soldering and rework techniques for SMD components Computer literacy, including proficiency in Microsoft Excel and Word Preferred (but not essential) Skills: Experience in dyno preparation and maintenance Ability to use CAD design for general fixtures and fittings Experience with high voltage (> 60V) and/or high current (> 100A) products Experience with EMC testing and knowledge of relevant standards (e.g., REG10, ISO16750, CISPR 25) Experience in thermal and environmental testing Background in automotive product development and testing Mechanical skills, including assembly and creation of one-off parts, and use of machine shop tools Experience with high-volume products Experience in HALT/HAAS testing Qualifications: A HND or equivalent qualification in Electrical and Electronic Engineering is required. Relevant experience may also be considered. Attributes: Enthusiastic, flexible, and able to thrive during times of ambiguity and change Structured individual with the ability to interact and communicate at all levels of the organisation Strong interpersonal, verbal, and written communication skills, with the ability to build relationships with internal and external stakeholders Good commercial awareness and proactive problem-solving skills, to ensure business needs are understood and agreed solutions are delivered This is a very hands-on position - we expect a person with a 'roll up your sleeves' attitude
Jun 19, 2026
Contractor
2 x Contract positions Outside IR35 On site We are seeking an experienced Test Technician to join their team on a contract basis. T Key Responsibilities: Product (software, hardware and mechanics) assembly, troubleshooting, and testing Executing tests and writing reports Designing, constructing, maintaining, and calibrating test equipment Maintaining a clean, tidy, and safe working environment Implementing continuous improvement practices for work processes and the working environment Identifying and managing continuous improvement of equipment and test methods Assisting development engineers with product analysis, including FMEAs and design reviews Ensuring work adheres to company quality standards and national/international standards Ensuring that all work is carried out safely Job Requirements: Understanding of electronic circuits, with experience in designing simple circuits Experience in assembling, troubleshooting, and testing electronic products Proficiency with electronic test equipment, including DVMs, oscilloscopes, and data loggers Ability to perform soldering and rework techniques for SMD components Computer literacy, including proficiency in Microsoft Excel and Word Preferred (but not essential) Skills: Experience in dyno preparation and maintenance Ability to use CAD design for general fixtures and fittings Experience with high voltage (> 60V) and/or high current (> 100A) products Experience with EMC testing and knowledge of relevant standards (e.g., REG10, ISO16750, CISPR 25) Experience in thermal and environmental testing Background in automotive product development and testing Mechanical skills, including assembly and creation of one-off parts, and use of machine shop tools Experience with high-volume products Experience in HALT/HAAS testing Qualifications: A HND or equivalent qualification in Electrical and Electronic Engineering is required. Relevant experience may also be considered. Attributes: Enthusiastic, flexible, and able to thrive during times of ambiguity and change Structured individual with the ability to interact and communicate at all levels of the organisation Strong interpersonal, verbal, and written communication skills, with the ability to build relationships with internal and external stakeholders Good commercial awareness and proactive problem-solving skills, to ensure business needs are understood and agreed solutions are delivered This is a very hands-on position - we expect a person with a 'roll up your sleeves' attitude
The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their primary nationality. Working: The role offers requires you to be onsite for 5 days a week is on secure site where SC clearance is needed. Join a business at the forefront of innovation, with a lot to offer! A company backed by a record multi-year order book, offering long-term stability and sustained investment, with years of secured work ahead! Company Highlights: Be part of an organisation that invests in its people and their long-term success: Join a company who are a global leader in defence innovation, known not only for its technological excellence but also for its outstanding workplace culture. A reputable business who, have a number of awards and recognitions, including Sunday times 'Best Places to Work 2024'. Recognised as a 'Most Loved Organisation' A organisation passionate about it's people with accreditations such as 'Investors in People 'We Invest in People' (Gold) & Investors in People 'We Invest in Wellbeing' (Platinum) - the highest level of accreditation. Passionate advocates for Equity, Diversity & Inclusion, with 10+ employee networks. Committed employer of veterans and service leavers, awarded as one of the Top 15 Great British Employers of Veterans in the Forces in Business Awards 2025 and Gold member of 'The 5% Club'. Armed Forces Covenant (Gold). Be part of a growing team, involved in an international product range, and influencing today's most advanced innovations! Full range of company benefits, flexible working, training, development, and clear career progression! Evolving business, with formal training programmes covering both technical and soft skills, complemented by lunchtime learning sessions, language courses, and supported self-study, with access to thousands of online courses and learning resources. We are looking for a skilled Electronics Technician to join our Calibration & Maintenance Team, supporting the calibration and upkeep of a wide range of Special to Type Test Equipment (STTE). This is a varied and rewarding role where no two days are the same. You'll be part of a dynamic, focused team that plays a key role in supporting the manufacturing process across all stages of product assembly, integration, and testing. Working closely with engineers and cross-functional teams, you'll help resolve both routine and complex technical challenges, contributing directly to business-critical operations. You will join an experienced team responsible for maintaining and calibrating complex test platforms used in the manufacture and testing of advanced electronic systems. You'll receive training to calibrate and support specialist factory test equipment across a broad technology range from DC through to microwave frequencies. Responsibilities: Work collaboratively within a multi-disciplinary team to support operational activities Maintain factory and proprietary test and measurement equipment in line with current procedures Carry out repair and maintenance tasks in accordance with department standards Produce clear, accurate maintenance records to ensure full traceability Essential Skills & Experience Advanced Level / Level 3 Electrical Engineering or Manufacturing Apprenticeship Level 3 academic qualification (e.g. ONC, diploma) in Electrical Engineering or Manufacturing Level 3 vocational qualification (e.g. NVQ) in a relevant discipline Experience in calibration of test equipment; knowledge of fault-finding and repair to component level is desirable Ability to interpret technical documents such as manuals, drawings, and specifications Understanding of calibration principles and processes Strong analytical and problem-solving skills Ability to manage multiple tasks and priorities effectively A proactive approach with a strong commitment to quality and safety Desirable Experience: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. Even If you feel like you don't meet every requirement, we encourage you to reach out and apply.
Jun 19, 2026
Full time
The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their primary nationality. Working: The role offers requires you to be onsite for 5 days a week is on secure site where SC clearance is needed. Join a business at the forefront of innovation, with a lot to offer! A company backed by a record multi-year order book, offering long-term stability and sustained investment, with years of secured work ahead! Company Highlights: Be part of an organisation that invests in its people and their long-term success: Join a company who are a global leader in defence innovation, known not only for its technological excellence but also for its outstanding workplace culture. A reputable business who, have a number of awards and recognitions, including Sunday times 'Best Places to Work 2024'. Recognised as a 'Most Loved Organisation' A organisation passionate about it's people with accreditations such as 'Investors in People 'We Invest in People' (Gold) & Investors in People 'We Invest in Wellbeing' (Platinum) - the highest level of accreditation. Passionate advocates for Equity, Diversity & Inclusion, with 10+ employee networks. Committed employer of veterans and service leavers, awarded as one of the Top 15 Great British Employers of Veterans in the Forces in Business Awards 2025 and Gold member of 'The 5% Club'. Armed Forces Covenant (Gold). Be part of a growing team, involved in an international product range, and influencing today's most advanced innovations! Full range of company benefits, flexible working, training, development, and clear career progression! Evolving business, with formal training programmes covering both technical and soft skills, complemented by lunchtime learning sessions, language courses, and supported self-study, with access to thousands of online courses and learning resources. We are looking for a skilled Electronics Technician to join our Calibration & Maintenance Team, supporting the calibration and upkeep of a wide range of Special to Type Test Equipment (STTE). This is a varied and rewarding role where no two days are the same. You'll be part of a dynamic, focused team that plays a key role in supporting the manufacturing process across all stages of product assembly, integration, and testing. Working closely with engineers and cross-functional teams, you'll help resolve both routine and complex technical challenges, contributing directly to business-critical operations. You will join an experienced team responsible for maintaining and calibrating complex test platforms used in the manufacture and testing of advanced electronic systems. You'll receive training to calibrate and support specialist factory test equipment across a broad technology range from DC through to microwave frequencies. Responsibilities: Work collaboratively within a multi-disciplinary team to support operational activities Maintain factory and proprietary test and measurement equipment in line with current procedures Carry out repair and maintenance tasks in accordance with department standards Produce clear, accurate maintenance records to ensure full traceability Essential Skills & Experience Advanced Level / Level 3 Electrical Engineering or Manufacturing Apprenticeship Level 3 academic qualification (e.g. ONC, diploma) in Electrical Engineering or Manufacturing Level 3 vocational qualification (e.g. NVQ) in a relevant discipline Experience in calibration of test equipment; knowledge of fault-finding and repair to component level is desirable Ability to interpret technical documents such as manuals, drawings, and specifications Understanding of calibration principles and processes Strong analytical and problem-solving skills Ability to manage multiple tasks and priorities effectively A proactive approach with a strong commitment to quality and safety Desirable Experience: Experience in the Defence / Aerospace or safety regulated environment would be advantageous. Even If you feel like you don't meet every requirement, we encourage you to reach out and apply.
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 19, 2026
Full time
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 19, 2026
Full time
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jun 19, 2026
Full time
Job Title: Manufacturing Engineer - Electrical Planner Location: Samlesbury - On site We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: £44,907+ depending on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. Job Description: As a Manufacturing Engineer - Electrical Planner, you will be interpreting approved design data, drawings and instructions and translate these into detailed build instructions for use by approved operators. The role offers an engaging mix of engineering planning, technical problem-solving, and direct shop floor and aircraft support, providing valuable exposure across manufacturing, engineering, and aircraft integration. It is an excellent platform for developing transferable skills and progressing into future opportunities across a range of aerospace programmes. Core duties: Translating design information in the form of CAD models, BOM, circuit drawings, material and manufacturing process specifications into repeatable processes as part of the Manufacturing Engineering process ensuring the original design intent is met Structuring manufacturing build instructions using SAPCAMS planning tool or equivalent electronic planning aid Supporting the production of aircraft build, including electrical looms, components, amalgamations, racks and panels, assemblies and installations Essential Skills: HNC, completed a Craft/Technician Apprenticeship, or experience in an Electrical Manufacturing role Experience and knowledge of Electrical processes Ability to interpret electrical drawings, standards and processes Experience with the use of Microsoft office suite Electrical Manufacturing Engineering and Process Planning Team: This is a unique opportunity to work on a multiple platform team, producing & supporting production engineering interpreting new design into work instructions. You'll play a pivotal role throughout the project lifecycle, from reviewing and approving engineering data to supporting hands-on aircraft build, installation, and testing activities. Working as part of a highly skilled, cross-functional team, you'll collaborate closely with Design Engineering, Production, and Supply Chain to deliver critical programme objectives . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: HGV Technician Location: Swindon Salary: 48,000 - 54,000 Overtime paid at 1.3x Various Shifts Available As HGV Technician you will responsible for maintaining, diagnosing, and repairing vehicles to ensure that vehicles are safe, reliable, and compliant with regulations. Technicians work on a range of tasks, from routine servicing to complex mechanical and electrical repairs, ensuring vehicles are fit for operation. What you'll do as the HGV Technician: Routine servicing, repair and maintenance of the PSV Fleet to highest DVSA standards Be first point of contact for in depth fault finding and repairs on various bus types. SME (Subject Matter Expert) in Mechanical and Electrical fault finding. Be fully conversant with the overhaul and repair of vehicle electrical systems including engine management, automatic/semi-automatic gearboxes, electronic braking, suspension, electronic destinations, multiplex wiring systems and E.C.U. Carry out projects/trials on behalf of the Engineering Director and/or Technical Manager Maintain detailed records of all work carried out, including parts used and time taken. Fully comply with all HS&E legislation and group policies. What you'll need to be an HGV Technician: NVQ level 3, City & Guilds, Time Served or equivalent qualifications in HGV / PSV Maintenance Full UK Driving licence Previous LCV Technician experience Previous HGV Technician experience Strong diagnostic and problem-solving skills Fully conversant with the safe operation of workshop equipment and the overhaul and repair of vehicle electrical systems. If you are interested in this HGV Technician role, please apply to Dudley today!
Jan 20, 2026
Full time
Job Title: HGV Technician Location: Swindon Salary: 48,000 - 54,000 Overtime paid at 1.3x Various Shifts Available As HGV Technician you will responsible for maintaining, diagnosing, and repairing vehicles to ensure that vehicles are safe, reliable, and compliant with regulations. Technicians work on a range of tasks, from routine servicing to complex mechanical and electrical repairs, ensuring vehicles are fit for operation. What you'll do as the HGV Technician: Routine servicing, repair and maintenance of the PSV Fleet to highest DVSA standards Be first point of contact for in depth fault finding and repairs on various bus types. SME (Subject Matter Expert) in Mechanical and Electrical fault finding. Be fully conversant with the overhaul and repair of vehicle electrical systems including engine management, automatic/semi-automatic gearboxes, electronic braking, suspension, electronic destinations, multiplex wiring systems and E.C.U. Carry out projects/trials on behalf of the Engineering Director and/or Technical Manager Maintain detailed records of all work carried out, including parts used and time taken. Fully comply with all HS&E legislation and group policies. What you'll need to be an HGV Technician: NVQ level 3, City & Guilds, Time Served or equivalent qualifications in HGV / PSV Maintenance Full UK Driving licence Previous LCV Technician experience Previous HGV Technician experience Strong diagnostic and problem-solving skills Fully conversant with the safe operation of workshop equipment and the overhaul and repair of vehicle electrical systems. If you are interested in this HGV Technician role, please apply to Dudley today!
Commercial Gas Engineer - Job Summary. We are looking to recruit an enthusiastic and dedicated commercial gas engineer to carry out a broad range of planned and reactive gas tasks in Worcester/Gloucester and surrounding areas. Salary: 46,000 to 50,000 (subject to knowledge and experience) Benefits: Company van, fuel card, Employee Assistance Programme, company performance bonus and pension Key Responsibilities include (but not limited to) Carry out planned and reactive maintenance across the estate as directed by Contract Manager (within capabilities and training) Work on own or as part of team to meet required deadlines and contract performance standards Work flexible working hours to suit business requirements Be on out of hours call out rota, attend emergency mechanical repair works as required Maintain a safe working environment for yourself, end users on site and general public at all Escalate issues to Supervisor/Contract Manager immediately. Work on own or as part of team to meet required deadlines and contract performance standards Liaise with site staff to gain access to sites and rooms to carry out maintenance tasks Assist contract supervisor to produce repair quotations Any other tasks required by company within skill set / experience Minimum Requirements / Qualifications Essential Domestic / Commercial gas certification CCN1, CENWAT, CODNCCO1, CDGA1 and CIGA1. Recognised Health & Safety training Good written and verbal communication skills Ability to achieve high levels of customer satisfaction Be able to operate SMART devices and complete electronic documentation Full driving licence Pass DBS / Police background checks for working in schools / Police stations Desirable NVQ 2/3 in relevant Mechanical discipline (or equivalent experience) OFTEC registered technician or knowledge / experience working on oil fired appliances / systems Unvented water systems WRAS Qualification Electrical safety training IPAF / PASMA qualification Benefits Up to 50,000 per annum Overtime 33 Days Holiday Ipad Iphone Vehicle Private Healthcare Contributory Pension
Oct 07, 2025
Full time
Commercial Gas Engineer - Job Summary. We are looking to recruit an enthusiastic and dedicated commercial gas engineer to carry out a broad range of planned and reactive gas tasks in Worcester/Gloucester and surrounding areas. Salary: 46,000 to 50,000 (subject to knowledge and experience) Benefits: Company van, fuel card, Employee Assistance Programme, company performance bonus and pension Key Responsibilities include (but not limited to) Carry out planned and reactive maintenance across the estate as directed by Contract Manager (within capabilities and training) Work on own or as part of team to meet required deadlines and contract performance standards Work flexible working hours to suit business requirements Be on out of hours call out rota, attend emergency mechanical repair works as required Maintain a safe working environment for yourself, end users on site and general public at all Escalate issues to Supervisor/Contract Manager immediately. Work on own or as part of team to meet required deadlines and contract performance standards Liaise with site staff to gain access to sites and rooms to carry out maintenance tasks Assist contract supervisor to produce repair quotations Any other tasks required by company within skill set / experience Minimum Requirements / Qualifications Essential Domestic / Commercial gas certification CCN1, CENWAT, CODNCCO1, CDGA1 and CIGA1. Recognised Health & Safety training Good written and verbal communication skills Ability to achieve high levels of customer satisfaction Be able to operate SMART devices and complete electronic documentation Full driving licence Pass DBS / Police background checks for working in schools / Police stations Desirable NVQ 2/3 in relevant Mechanical discipline (or equivalent experience) OFTEC registered technician or knowledge / experience working on oil fired appliances / systems Unvented water systems WRAS Qualification Electrical safety training IPAF / PASMA qualification Benefits Up to 50,000 per annum Overtime 33 Days Holiday Ipad Iphone Vehicle Private Healthcare Contributory Pension
Battery Field Engineer Manchester £30,000 to £35,000 + Overtime + Van + Matched Pension + Benefits Package Battery Field Engineer required by a rapidly expanding battery recycling company. As a Battery Field Engineer, you will play a critical role in supporting the technical operations of the recycling processes. You will work both on-site at their Manchester facility and off-site at customer locations. Your responsibilities will span equipment maintenance, troubleshooting, and optimisation, as well as providing technical solutions to ensure the highest level of service and professionalism in all operations. This is a unique opportunity to be at the forefront of energy technology, helping to drive the future of sustainable energy storage. The Battery Field Engineer Role: Conduct on-site planned and reactive maintenance, repairs, and troubleshooting of battery related equipment to minimize downtime and maximize operational efficiency. Perform battery disassembly, sorting, and processing, ensuring adherence to safety and quality standards. Provide technical support during off-site operations, representing the company professionally while ensuring customer satisfaction. Implement and manage proactive and reactive maintenance schedules for equipment, identifying opportunities for system upgrades or process improvements. Collaborate with cross-functional teams to address technical issues, improve workflows, and contribute to continuous improvement initiatives. Train and mentor technicians and operators in equipment use, safety protocols, and process optimization. Maintain accurate records of work performed, including equipment logs, maintenance schedules, and inventory management. Participate in project-based work, offering problem-solving skills to enhance or develop equipment and processes. The Battery Field Engineer: Understanding of mechanical, electrical, or electronic systems used in battery-based vehicles and equipment. Proven ability to diagnose and resolve technical issues efficiently. Knowledge of health and safety regulations and environmental compliance. Engineering qualifications at a Level 3 or equivalent
Oct 07, 2025
Full time
Battery Field Engineer Manchester £30,000 to £35,000 + Overtime + Van + Matched Pension + Benefits Package Battery Field Engineer required by a rapidly expanding battery recycling company. As a Battery Field Engineer, you will play a critical role in supporting the technical operations of the recycling processes. You will work both on-site at their Manchester facility and off-site at customer locations. Your responsibilities will span equipment maintenance, troubleshooting, and optimisation, as well as providing technical solutions to ensure the highest level of service and professionalism in all operations. This is a unique opportunity to be at the forefront of energy technology, helping to drive the future of sustainable energy storage. The Battery Field Engineer Role: Conduct on-site planned and reactive maintenance, repairs, and troubleshooting of battery related equipment to minimize downtime and maximize operational efficiency. Perform battery disassembly, sorting, and processing, ensuring adherence to safety and quality standards. Provide technical support during off-site operations, representing the company professionally while ensuring customer satisfaction. Implement and manage proactive and reactive maintenance schedules for equipment, identifying opportunities for system upgrades or process improvements. Collaborate with cross-functional teams to address technical issues, improve workflows, and contribute to continuous improvement initiatives. Train and mentor technicians and operators in equipment use, safety protocols, and process optimization. Maintain accurate records of work performed, including equipment logs, maintenance schedules, and inventory management. Participate in project-based work, offering problem-solving skills to enhance or develop equipment and processes. The Battery Field Engineer: Understanding of mechanical, electrical, or electronic systems used in battery-based vehicles and equipment. Proven ability to diagnose and resolve technical issues efficiently. Knowledge of health and safety regulations and environmental compliance. Engineering qualifications at a Level 3 or equivalent
Remanufacturing Electrical Technician Location - Coventry Salary - Competitive Hours - Full time Are you an experienced Electronics Technician with strong PCB rework and component-level fault-finding skills? Hawk 3 Talent Solutions is proud to be recruiting on behalf of a leading name in automotive and defence engineering for a highly skilled, hands-on Remanufacturing Electrical Technician . This role is perfect for someone with a keen eye for detail, precision in their work, and a passion for electronics and engineering problem-solving. The Role: You'll be responsible for the assessment, repair, and testing of a wide range of automotive electrical and electronic components , working to both OEM and MoD standards . Key Responsibilities: Assess and evaluate returned electrical/electronic components Perform PCB rework , component-level fault-finding , and repairs Dismantle, repair, and rebuild units to high standards Ensure accurate documentation (job cards, BOMs) Test components to original equipment specifications Report faults and non-conformances to the Workshop Supervisor Follow H&S and QHSE procedures at all times Support other workshop activities as needed What We're Looking For: Technical Skills: Strong experience in electronic fault-finding at component level Proficient in PCB rework (soldering, reflow, repair techniques) Ability to read schematics and circuit diagrams Logical and methodical approach to problem-solving Familiarity with QHSE standards and workshop best practice Comfortable using MS Office (especially Excel, or willing to learn) Personal Attributes: Excellent attention to detail Strong communication and teamwork skills Organised, proactive, and eager to learn Preferred Qualifications: HNC/HND, NVQ, or equivalent in Electronics or Electrical Engineering Previous experience in automotive , defence , or related sectors What's in It for You: Competitive salary 25 days holiday + bank holidays Life cover at 3x base salary 5% employer pension contribution (after 12 months) On-the-job training and long-term career development Access to wellbeing support resources If you would like to apply for the role of Remanufacturing Electrical Technician then please email your CV to (url removed) or call Donna on (phone number removed). Closing date is 08.10.25. Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.
Oct 07, 2025
Full time
Remanufacturing Electrical Technician Location - Coventry Salary - Competitive Hours - Full time Are you an experienced Electronics Technician with strong PCB rework and component-level fault-finding skills? Hawk 3 Talent Solutions is proud to be recruiting on behalf of a leading name in automotive and defence engineering for a highly skilled, hands-on Remanufacturing Electrical Technician . This role is perfect for someone with a keen eye for detail, precision in their work, and a passion for electronics and engineering problem-solving. The Role: You'll be responsible for the assessment, repair, and testing of a wide range of automotive electrical and electronic components , working to both OEM and MoD standards . Key Responsibilities: Assess and evaluate returned electrical/electronic components Perform PCB rework , component-level fault-finding , and repairs Dismantle, repair, and rebuild units to high standards Ensure accurate documentation (job cards, BOMs) Test components to original equipment specifications Report faults and non-conformances to the Workshop Supervisor Follow H&S and QHSE procedures at all times Support other workshop activities as needed What We're Looking For: Technical Skills: Strong experience in electronic fault-finding at component level Proficient in PCB rework (soldering, reflow, repair techniques) Ability to read schematics and circuit diagrams Logical and methodical approach to problem-solving Familiarity with QHSE standards and workshop best practice Comfortable using MS Office (especially Excel, or willing to learn) Personal Attributes: Excellent attention to detail Strong communication and teamwork skills Organised, proactive, and eager to learn Preferred Qualifications: HNC/HND, NVQ, or equivalent in Electronics or Electrical Engineering Previous experience in automotive , defence , or related sectors What's in It for You: Competitive salary 25 days holiday + bank holidays Life cover at 3x base salary 5% employer pension contribution (after 12 months) On-the-job training and long-term career development Access to wellbeing support resources If you would like to apply for the role of Remanufacturing Electrical Technician then please email your CV to (url removed) or call Donna on (phone number removed). Closing date is 08.10.25. Please note this could change subject to suitable applications. Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you wanting to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £35,000 - £45,000 BENEFITS: Overnight payment for any nights away Company Car or Van 25 Days Annual Leave (plus Statutory Days) Pension - matched to 5% of salary Private Healthcare Life Assurance Income Protection cover LOCATION: Midlands-based, in and around the M6 or M1, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Birmingham, Rugby, Leicester, Wolverhampton, Solihull, Worcester, Royal Leamington Spa, Coventry, Warwick. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery You will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18247, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you wanting to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £35,000 - £45,000 BENEFITS: Overnight payment for any nights away Company Car or Van 25 Days Annual Leave (plus Statutory Days) Pension - matched to 5% of salary Private Healthcare Life Assurance Income Protection cover LOCATION: Midlands-based, in and around the M6 or M1, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Birmingham, Rugby, Leicester, Wolverhampton, Solihull, Worcester, Royal Leamington Spa, Coventry, Warwick. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery You will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18247, Wallace Hind Selection
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
Oct 06, 2025
Full time
Are you a professional Service Engineer with a flexible mindset who enjoys a variety of travel, both locally and nationally? Are you looking to upgrade your career and work for a high-quality employer with world-class products, applications, and customers? We welcome applications from hard working Service Engineers with different industrial capital equipment backgrounds. BASIC SALARY: £40,000 - £48,000 BENEFITS: Additional overnight payment for any nights away Company Car or Van 25 Days Annual Leave plus Statutory Days Pension - matched to 5% of salary. Private Healthcare Life Assurance Income Protection cover LOCATION: South-East or South-Central-based, and /or South or West of the M25, with regional and national travel as required (5 days on the road per week). COMMUTABLE LOCATIONS: Woking, Guildford, Leatherhead, Crawley, Slough, Windsor, Reading, Basingstoke, Redhill, Wokingham, Bracknell, Epsom, Aldershot, Camberley, Farnham, Thatcham. JOB DESCRIPTION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery As our Service Engineer, you will join an established and experienced national team, your first 6 months will be spent training, learning on the job, and shadowing a colleague until you are competent and ready to work solo. KEY RESPONSIBILITIES: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery Your job will include: A mixture of planned installations, coupled with reactive repair work. Dealing with breakdowns and servicing of machinery on customers' premises. Managing a diverse workload. Working with customers across many industry sectors; including print, packaging, defence, aerospace, graphics, medical, automotive, and fashion, etc. Building seamless long-term relationships with our customers, both externally and internally. Providing technical support and expertise within our state-of-the-art internal demo centre. Write and complete Field Service Reports for customer records. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - Industrial Capital Equipment, Machinery To be successful in your application, you will have tangible experience of working in an industrial Service Engineer role, within capital equipment (or similar). In addition to this you will also be able to demonstrate: Mechanical, Electronic, Electrical, and Software engineering skills gained within a fast-paced environment. Smart, credible, customer-facing, and creative flare in problem-solving. Full driving licence, passport, and flexible to conduct overnight stays in the UK, and skills training in Switzerland (or occasional overseas work). Confident communication, with the adaptability to engage at all levels. A methodical approach with the ability to work independently, manage your time, and deliver accurate results. OUR COMPANY: We are a multiple-award winning, branded manufacturer of prestigious capital equipment used across a wide range of industries. Our products and service support are recognised as industry leading. We continue to build on our successful UK presence, with the full backing and resources of a strong international business. Culturally a progressive, open-minded, and forward-thinking senior management team. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Service Engineer, Technician, Industrial Capital Equipment, Industrial Consumables, Maintenance Engineer, Maintenance Technician, Equipment Engineer, Plant Engineer, Field Engineer. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18248, Wallace Hind Selection
