Senior Manufacturing Engineer - Electrical Ampthill, Bedfordshire Permanent, 37.5h, 4 day working week Monday to Thursday Salary: 55,000 - 70,000 We are seeking an experienced Senior Manufacturing Engineer specialising in electrical and cabling systems to lead the development, industrialisation, and continuous improvement of complex electrical harness manufacturing activities from initial design release through to full-rate production. This role will play a key part in supporting both new product introduction (NPI) programmes and the optimisation of existing manufacturing operations, ensuring products are delivered safely, efficiently, and to the highest aerospace quality standards. The successful candidate will work closely with Design Engineering, Quality, Supply Chain, Production, and Programme teams to develop robust and scalable manufacturing solutions within a fast-paced aerospace and defence environment. The position requires a strong technical understanding of electrical harness assembly processes combined with practical experience implementing manufacturing improvements on the factory floor. Key Responsibilities Lead manufacturing engineering activities for electrical harness and cabling assemblies across the full product lifecycle. Support New Product Introduction (NPI) activities including process development, tooling definition, work instruction creation, and production readiness reviews. Develop and implement efficient manufacturing processes for electrical harness assembly, including: Wire preparation and termination, Crimping and soldering, Braiding and shielding, Potting and encapsulation, Looming and routing, Electrical testing and inspection Translate engineering designs and drawings into robust, repeatable manufacturing methods and documentation. Create and maintain manufacturing documentation including: Process specifications, Manufacturing routings, Standard operating procedures (SOPs), Work instructions, PFMEA and control plans Drive continuous improvement initiatives focused on: Cost reduction, Yield improvement, Scrap and rework reduction, Cycle time optimisation, Right-first-time manufacturing Provide technical support to production teams to resolve manufacturing and quality issues in a timely manner. Conduct root cause investigations using structured problem-solving methodologies such as: 8D, RC, Fishbone analysi, 5 Whys Collaborate with Quality Engineering to ensure compliance with aerospace standards and customer requirements. Support design for manufacture (DFM) and design for assembly (DFA) reviews during product development stages. Identify and implement tooling, fixture, and process improvements to enhance manufacturing capability and repeatability. Participate in internal and external audits and support regulatory and customer compliance activities. Work closely with suppliers and subcontractors to ensure manufacturing capability and component quality requirements are achieved. Mentor junior engineers and production personnel on manufacturing best practices and process standards. Support capacity planning, line balancing, and production ramp-up activities for new and existing programmes. Required skills, qualifications and experience Degree-qualified in Manufacturing Engineering, Electrical Engineering, Aerospace Engineering, or a related engineering discipline. Proven experience in a Manufacturing Engineering role within aerospace, defence, automotive, or another highly regulated industry. Strong experience leading New Product Introduction (NPI) activities from prototype through to full production release. Demonstrated success delivering continuous improvement initiatives focused on quality, efficiency, and cost reduction. Strong understanding of aerospace quality standards and regulatory requirements, including: AS9100, IPC/WHMA-A-620, ESD control requirements, Configuration control processes Deep technical knowledge of electrical harness manufacturing processes, including: Crimping, Braiding, Potting, Soldering, Cable routing and protection, Connector assembly and backshell integration Experience developing manufacturing documentation and production process controls. Proficient in CAD systems and manufacturing documentation tools. Experience using ERP and MRP systems within a production environment. Strong analytical and problem-solving skills with the ability to identify root causes and implement sustainable corrective actions. Excellent communication and stakeholder management skills, with the ability to work effectively across engineering, quality, and production functions. Comfortable working within a fast-paced, high-mix, low-volume manufacturing environment. Strong organisational skills with the ability to manage multiple priorities and programme deadlines simultaneously. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Jun 26, 2026
Full time
Senior Manufacturing Engineer - Electrical Ampthill, Bedfordshire Permanent, 37.5h, 4 day working week Monday to Thursday Salary: 55,000 - 70,000 We are seeking an experienced Senior Manufacturing Engineer specialising in electrical and cabling systems to lead the development, industrialisation, and continuous improvement of complex electrical harness manufacturing activities from initial design release through to full-rate production. This role will play a key part in supporting both new product introduction (NPI) programmes and the optimisation of existing manufacturing operations, ensuring products are delivered safely, efficiently, and to the highest aerospace quality standards. The successful candidate will work closely with Design Engineering, Quality, Supply Chain, Production, and Programme teams to develop robust and scalable manufacturing solutions within a fast-paced aerospace and defence environment. The position requires a strong technical understanding of electrical harness assembly processes combined with practical experience implementing manufacturing improvements on the factory floor. Key Responsibilities Lead manufacturing engineering activities for electrical harness and cabling assemblies across the full product lifecycle. Support New Product Introduction (NPI) activities including process development, tooling definition, work instruction creation, and production readiness reviews. Develop and implement efficient manufacturing processes for electrical harness assembly, including: Wire preparation and termination, Crimping and soldering, Braiding and shielding, Potting and encapsulation, Looming and routing, Electrical testing and inspection Translate engineering designs and drawings into robust, repeatable manufacturing methods and documentation. Create and maintain manufacturing documentation including: Process specifications, Manufacturing routings, Standard operating procedures (SOPs), Work instructions, PFMEA and control plans Drive continuous improvement initiatives focused on: Cost reduction, Yield improvement, Scrap and rework reduction, Cycle time optimisation, Right-first-time manufacturing Provide technical support to production teams to resolve manufacturing and quality issues in a timely manner. Conduct root cause investigations using structured problem-solving methodologies such as: 8D, RC, Fishbone analysi, 5 Whys Collaborate with Quality Engineering to ensure compliance with aerospace standards and customer requirements. Support design for manufacture (DFM) and design for assembly (DFA) reviews during product development stages. Identify and implement tooling, fixture, and process improvements to enhance manufacturing capability and repeatability. Participate in internal and external audits and support regulatory and customer compliance activities. Work closely with suppliers and subcontractors to ensure manufacturing capability and component quality requirements are achieved. Mentor junior engineers and production personnel on manufacturing best practices and process standards. Support capacity planning, line balancing, and production ramp-up activities for new and existing programmes. Required skills, qualifications and experience Degree-qualified in Manufacturing Engineering, Electrical Engineering, Aerospace Engineering, or a related engineering discipline. Proven experience in a Manufacturing Engineering role within aerospace, defence, automotive, or another highly regulated industry. Strong experience leading New Product Introduction (NPI) activities from prototype through to full production release. Demonstrated success delivering continuous improvement initiatives focused on quality, efficiency, and cost reduction. Strong understanding of aerospace quality standards and regulatory requirements, including: AS9100, IPC/WHMA-A-620, ESD control requirements, Configuration control processes Deep technical knowledge of electrical harness manufacturing processes, including: Crimping, Braiding, Potting, Soldering, Cable routing and protection, Connector assembly and backshell integration Experience developing manufacturing documentation and production process controls. Proficient in CAD systems and manufacturing documentation tools. Experience using ERP and MRP systems within a production environment. Strong analytical and problem-solving skills with the ability to identify root causes and implement sustainable corrective actions. Excellent communication and stakeholder management skills, with the ability to work effectively across engineering, quality, and production functions. Comfortable working within a fast-paced, high-mix, low-volume manufacturing environment. Strong organisational skills with the ability to manage multiple priorities and programme deadlines simultaneously. Lockheed Martin is committed to upholding principles of equal opportunity, fostering a work environment that is aligned with our core values of integrity, respect, and exceptional performance. We recognize the importance of leveraging the unique talents and experiences of all our employees to drive innovation, deliver superior solutions, and maximize value for our customers. Our focus is on identifying the most qualified candidate for each role, regardless of their background. If you are interested in a position, we invite you to share how your skills and perspectives could bolster our team and encourage you to apply, even if you feel your qualifications do not fully meet all the job criteria outlined in our advertisement. Furthermore, Lockheed Martin is dedicated to ensuring our recruitment process is inclusive for all individuals. We are prepared to accommodate reasonable adjustments for applicants as needed. If you require assistance or adjustments to participate in the job application or interview process, please contact or call (phone number removed) Disclaimer: This vacancy is being advertised by Optamor Limited. Optamor is a specialist Recruitment Process Outsourcing provider. We provide a flexible full recruitment solution which takes care of all recruitment requirements from planning to on-boarding. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
AVIC Cabin Systems (UK) Limited
Waterbeach, Cambridgeshire
Purpose We are seeking a highly skilled and motivated Lead Lineside Production Planner Engineer to join our dynamic team. The successful candidate will be responsible for overseeing and coordinating the lineside production planning activities for onsite manufacture in Cambridge. This role focuses on ensuring seamless integration of products into the production environment, optimizing production schedules, and maintaining a high level of efficiency and quality. Key Responsibilities Project Coordination: Lead the planning and execution of production planning for new product introductions. Collaborate with cross-functional teams including engineering, procurement, quality, and production to ensure successful projects. Develop and maintain project timelines, ensuring alignment with overall project goals and milestones. Support and lead change control reviews. Production Planning: Create and manage detailed production planning for all products, ensuring timely and efficient manufacturing processes. Monitor and adjust production plans as needed to address any issues or changes in project scope or timelines. Ensure all materials, tools, and resources are available to meet production requirements. Support Production and Quality Assurance in resolving production problems and non-conformances Stakeholder Communication: Serve as the on site primary point of contact for production planning activities. Communicate regularly with stakeholders to provide updates on project status, production schedules, and potential risks or delays. Facilitate regular meetings to review project progress and address any concerns or challenges. Attendance to all key morning standup Boardwalks Process Improvement: Identify opportunities for process improvements within the production planning function. Implement best practices and continuous improvement initiatives to enhance efficiency, reduce lead times and hours, and optimize resource utilization. Ensure compliance with industry standards and company policies. Documentation and Reporting: Maintain accurate and up-to-date documentation for all NPI production planning activities. Prepare and present reports on production performance, schedule adherence, and project status to senior management. Ensure all production planning documentation is properly filed and accessible for future reference. Knowledge, Education, and Skills Knowledge: - Minimum of 5 years of experience in Production planning / Coordination function, preferably within the aviation or aerospace industry. - Proven experience in leading NPI projects and coordinating cross-functional teams. - Strong knowledge of production processes, scheduling, and resource management. - Excellent project management skills with the ability to manage multiple projects simultaneously. - Strong analytical and problem-solving skills. External Relationships & Interactions: OEMs, 3rd party resource, equipment or service providers Please note; Numerous positions at AVIC Cabin Systems UK LTD are governed by security and export control regulations. These rules indicate that elements such as your nationality/ any prior nationalities you may have held, and your birthplace can influence the positions you are qualified to undertake within the organisation. All candidates must at least meet the baseline personnel security standard. Additionally, certain roles demand elevated levels of National security vetting. ACS UK ltd is an equal opportunities employer
Jun 26, 2026
Full time
Purpose We are seeking a highly skilled and motivated Lead Lineside Production Planner Engineer to join our dynamic team. The successful candidate will be responsible for overseeing and coordinating the lineside production planning activities for onsite manufacture in Cambridge. This role focuses on ensuring seamless integration of products into the production environment, optimizing production schedules, and maintaining a high level of efficiency and quality. Key Responsibilities Project Coordination: Lead the planning and execution of production planning for new product introductions. Collaborate with cross-functional teams including engineering, procurement, quality, and production to ensure successful projects. Develop and maintain project timelines, ensuring alignment with overall project goals and milestones. Support and lead change control reviews. Production Planning: Create and manage detailed production planning for all products, ensuring timely and efficient manufacturing processes. Monitor and adjust production plans as needed to address any issues or changes in project scope or timelines. Ensure all materials, tools, and resources are available to meet production requirements. Support Production and Quality Assurance in resolving production problems and non-conformances Stakeholder Communication: Serve as the on site primary point of contact for production planning activities. Communicate regularly with stakeholders to provide updates on project status, production schedules, and potential risks or delays. Facilitate regular meetings to review project progress and address any concerns or challenges. Attendance to all key morning standup Boardwalks Process Improvement: Identify opportunities for process improvements within the production planning function. Implement best practices and continuous improvement initiatives to enhance efficiency, reduce lead times and hours, and optimize resource utilization. Ensure compliance with industry standards and company policies. Documentation and Reporting: Maintain accurate and up-to-date documentation for all NPI production planning activities. Prepare and present reports on production performance, schedule adherence, and project status to senior management. Ensure all production planning documentation is properly filed and accessible for future reference. Knowledge, Education, and Skills Knowledge: - Minimum of 5 years of experience in Production planning / Coordination function, preferably within the aviation or aerospace industry. - Proven experience in leading NPI projects and coordinating cross-functional teams. - Strong knowledge of production processes, scheduling, and resource management. - Excellent project management skills with the ability to manage multiple projects simultaneously. - Strong analytical and problem-solving skills. External Relationships & Interactions: OEMs, 3rd party resource, equipment or service providers Please note; Numerous positions at AVIC Cabin Systems UK LTD are governed by security and export control regulations. These rules indicate that elements such as your nationality/ any prior nationalities you may have held, and your birthplace can influence the positions you are qualified to undertake within the organisation. All candidates must at least meet the baseline personnel security standard. Additionally, certain roles demand elevated levels of National security vetting. ACS UK ltd is an equal opportunities employer
Job Title: Senior Manufacturing Engineer Location: Bedfordshire The Manufacturing Engineer designs, implements, and optimizes large-scale Wire Arc Additive Manufacturing processes for aerospace components. This role focuses on the development of processes for complex, near-net-shape metallic structures from design to production, ensuring strict compliance with aviation quality and safety standards. Key Responsibilities Process Development: Establish, validate, and optimize WAAM deposition parameters (current, voltage, travel speed, shielding gas flow) for aerospace alloys like Titanium, Inconel, and Aluminium. Path Planning & Simulation: Utilize specialized additive software to generate, simulate, and optimize multi-axis robot/CNC deposition paths to prevent collisions and minimize thermal distortion. Thermal Management: Design and execute thermal control strategies, including inter-pass temperature monitoring and in process cooling, to manage residual stress and microstructural integrity. NPI Support: Lead New Product Introduction (NPI) by transforming aerospace CAD models into WAAM-optimized, near-net-shape geometries ready for post-process machining. Equipment Integration: Program, configure, and maintain integrated WAAM cells, including robotic manipulators (ABB), power sources (Fronius) and environmental enclosures. Quality & Qualification: Ensure all manufacturing processes conform to aerospace standards such as AS9100 and emerging additive manufacturing regulations (e.g., ASTM F42, SAE AMS7039). Key Skills & Competencies Additive Software: High proficiency in WAAM-specific slicing and path-generation software. Robotics & Automation: Competence in programming multi-axis industrial robots and integrating sensor feedback loops for real-time process monitoring. Aerospace Metallurgy: Deep understanding of solidification mechanics, phase transformations, and defect generation (porosity, cracking) in wire-fed arc deposition. Subtractive Integration: Strong knowledge of how WAAM near-net shapes interface with subsequent precision CNC machining operations. Root Cause Analysis: Mastery of problem-solving frameworks (8D, FMEA, 5 Whys) to troubleshoot deposition anomalies and microstructural defects. I am keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Senior Manufacturing Engineer in my team, this is the opportunity for you! You will need to hold or be eligible to hold SC clearance. So, if you are interested in joining a well-established, renowned organisation working with experts in their field as the next Senior Manufacturing Engineer, hit that apply button now! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Jun 23, 2026
Full time
Job Title: Senior Manufacturing Engineer Location: Bedfordshire The Manufacturing Engineer designs, implements, and optimizes large-scale Wire Arc Additive Manufacturing processes for aerospace components. This role focuses on the development of processes for complex, near-net-shape metallic structures from design to production, ensuring strict compliance with aviation quality and safety standards. Key Responsibilities Process Development: Establish, validate, and optimize WAAM deposition parameters (current, voltage, travel speed, shielding gas flow) for aerospace alloys like Titanium, Inconel, and Aluminium. Path Planning & Simulation: Utilize specialized additive software to generate, simulate, and optimize multi-axis robot/CNC deposition paths to prevent collisions and minimize thermal distortion. Thermal Management: Design and execute thermal control strategies, including inter-pass temperature monitoring and in process cooling, to manage residual stress and microstructural integrity. NPI Support: Lead New Product Introduction (NPI) by transforming aerospace CAD models into WAAM-optimized, near-net-shape geometries ready for post-process machining. Equipment Integration: Program, configure, and maintain integrated WAAM cells, including robotic manipulators (ABB), power sources (Fronius) and environmental enclosures. Quality & Qualification: Ensure all manufacturing processes conform to aerospace standards such as AS9100 and emerging additive manufacturing regulations (e.g., ASTM F42, SAE AMS7039). Key Skills & Competencies Additive Software: High proficiency in WAAM-specific slicing and path-generation software. Robotics & Automation: Competence in programming multi-axis industrial robots and integrating sensor feedback loops for real-time process monitoring. Aerospace Metallurgy: Deep understanding of solidification mechanics, phase transformations, and defect generation (porosity, cracking) in wire-fed arc deposition. Subtractive Integration: Strong knowledge of how WAAM near-net shapes interface with subsequent precision CNC machining operations. Root Cause Analysis: Mastery of problem-solving frameworks (8D, FMEA, 5 Whys) to troubleshoot deposition anomalies and microstructural defects. I am keen to get this position filled ASAP, so if you feel you have the skills and desire to provide passion and drive as the next Senior Manufacturing Engineer in my team, this is the opportunity for you! You will need to hold or be eligible to hold SC clearance. So, if you are interested in joining a well-established, renowned organisation working with experts in their field as the next Senior Manufacturing Engineer, hit that apply button now! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Senior Product Manager - Mechanical / Electro-Mechanical Products (Global) Location: North West London (NW2) Hybrid Working + Global Travel Salary: Up to 85,000 + Bonus + Benefits Global Senior Product Manager - Mechanical / Electro-Mechanical Products - North West London (NW2) - Hybrid Working & Global Travel Are you a Global Senior Product Manager with experience delivering physical, engineered products within industrial engineering or manufacturing environments? This Global Senior Product Manager role is specifically focused on mechanical and electro-mechanical products. It will not suit candidates from SaaS, digital, software, AI, fintech, or service-led product environments. This is an excellent opportunity to join a growing global engineering and manufacturing business, where you will take ownership of a high-value product line and play a key role in shaping product innovation, development, and long-term commercial success. The business designs and manufactures safety-critical engineered products used across industrial and infrastructure environments, where reliability, compliance, and performance are essential. The Global Senior Product Manager Role As a Senior Product Manager, you will take ownership of a flagship engineered product line valued at approximately 65m, operating within a technically complex, manufacturing-led environment. This role is heavily focused on physical product development, working closely with engineering and manufacturing teams to define, develop, industrialise, and launch products globally. You will lead the product lifecycle end-to-end, from concept and design through to manufacture, launch, and continuous improvement. Key Responsibilities of the Global Senior Product Manager Role Own the full product lifecycle from concept, engineering development, and manufacture through to launch and optimisation Define and deliver the global product strategy, roadmap, and innovation pipeline Lead new product introduction (NPI) through a structured stage-gate development process Work closely with engineering, R&D, and manufacturing teams to develop and industrialise products Define product specifications and translate customer/market requirements into engineered solutions Develop business cases and value propositions for new product development Drive technical differentiation and competitive positioning within industrial markets Align and standardise product offering across global manufacturing and sales regions Take ownership of product performance, including P&L responsibility Influence stakeholders across a global, matrix organisation Requirements for the Global Senior Product Manager Role Degree in Engineering or a related technical discipline Proven experience as a Senior Product Manager or Product Manager within engineering or manufacturing businesses Strong experience managing physical engineered products (mechanical or electro-mechanical) Experience working closely with engineering and R&D teams on product development and innovation Experience with new product introduction (NPI) and manufacturing integration Strong understanding of how products are designed, engineered, and manufactured Commercial awareness including business case development and P&L understanding Experience operating across global or multi-region markets Applications from candidates whose experience is primarily in software, SaaS, digital platforms, AI, fintech, or app-based products will not be suitable for this role. What's On Offer Salary up to 85,000 + Bonus + Benefits Ownership of a 65m global engineered product line Strong focus on innovation within a manufacturing environment Global exposure with circa 30% travel (USA, Europe, North Africa) High-visibility role with direct influence on product strategy and development Hybrid working model (North West London base) Location - North West London (NW2), commutable from London, Wembley, Harrow, Finchley, Barnet, Brent Cross and surrounding areas Apply Now - This is an excellent opportunity for a Senior Product Manager to take ownership of a globally significant, engineered product line, driving innovation and product development within a complex manufacturing environment. Desired Skills and Experience Engineering, Mechanical Engineering, Electro-Mechanical, Product Management, Technical Product Management, Senior Product Manager, Product Manager, Physical Products, Engineered Products, Manufacturing, Industrial Engineering, Industrial Products, Infrastructure, Product Lifecycle Management, NPI, New Product Introduction, Product Development, Product Strategy, Innovation, R&D, P&L, Business Case Development, Market Analysis, Stakeholder Management To find out more about Progressive please visit (url removed) Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
Jun 20, 2026
Full time
Senior Product Manager - Mechanical / Electro-Mechanical Products (Global) Location: North West London (NW2) Hybrid Working + Global Travel Salary: Up to 85,000 + Bonus + Benefits Global Senior Product Manager - Mechanical / Electro-Mechanical Products - North West London (NW2) - Hybrid Working & Global Travel Are you a Global Senior Product Manager with experience delivering physical, engineered products within industrial engineering or manufacturing environments? This Global Senior Product Manager role is specifically focused on mechanical and electro-mechanical products. It will not suit candidates from SaaS, digital, software, AI, fintech, or service-led product environments. This is an excellent opportunity to join a growing global engineering and manufacturing business, where you will take ownership of a high-value product line and play a key role in shaping product innovation, development, and long-term commercial success. The business designs and manufactures safety-critical engineered products used across industrial and infrastructure environments, where reliability, compliance, and performance are essential. The Global Senior Product Manager Role As a Senior Product Manager, you will take ownership of a flagship engineered product line valued at approximately 65m, operating within a technically complex, manufacturing-led environment. This role is heavily focused on physical product development, working closely with engineering and manufacturing teams to define, develop, industrialise, and launch products globally. You will lead the product lifecycle end-to-end, from concept and design through to manufacture, launch, and continuous improvement. Key Responsibilities of the Global Senior Product Manager Role Own the full product lifecycle from concept, engineering development, and manufacture through to launch and optimisation Define and deliver the global product strategy, roadmap, and innovation pipeline Lead new product introduction (NPI) through a structured stage-gate development process Work closely with engineering, R&D, and manufacturing teams to develop and industrialise products Define product specifications and translate customer/market requirements into engineered solutions Develop business cases and value propositions for new product development Drive technical differentiation and competitive positioning within industrial markets Align and standardise product offering across global manufacturing and sales regions Take ownership of product performance, including P&L responsibility Influence stakeholders across a global, matrix organisation Requirements for the Global Senior Product Manager Role Degree in Engineering or a related technical discipline Proven experience as a Senior Product Manager or Product Manager within engineering or manufacturing businesses Strong experience managing physical engineered products (mechanical or electro-mechanical) Experience working closely with engineering and R&D teams on product development and innovation Experience with new product introduction (NPI) and manufacturing integration Strong understanding of how products are designed, engineered, and manufactured Commercial awareness including business case development and P&L understanding Experience operating across global or multi-region markets Applications from candidates whose experience is primarily in software, SaaS, digital platforms, AI, fintech, or app-based products will not be suitable for this role. What's On Offer Salary up to 85,000 + Bonus + Benefits Ownership of a 65m global engineered product line Strong focus on innovation within a manufacturing environment Global exposure with circa 30% travel (USA, Europe, North Africa) High-visibility role with direct influence on product strategy and development Hybrid working model (North West London base) Location - North West London (NW2), commutable from London, Wembley, Harrow, Finchley, Barnet, Brent Cross and surrounding areas Apply Now - This is an excellent opportunity for a Senior Product Manager to take ownership of a globally significant, engineered product line, driving innovation and product development within a complex manufacturing environment. Desired Skills and Experience Engineering, Mechanical Engineering, Electro-Mechanical, Product Management, Technical Product Management, Senior Product Manager, Product Manager, Physical Products, Engineered Products, Manufacturing, Industrial Engineering, Industrial Products, Infrastructure, Product Lifecycle Management, NPI, New Product Introduction, Product Development, Product Strategy, Innovation, R&D, P&L, Business Case Development, Market Analysis, Stakeholder Management To find out more about Progressive please visit (url removed) Progressive Recruitment, a trading division of SThree Partnership LLP is acting as an Employment Business in relation to this vacancy Registered office 8 Bishopsgate, London, EC2N 4BQ, United Kingdom Partnership Number OC(phone number removed) England and Wales
Senior Manufacturing Engineer Peterlee (Site based) 12-month contract 36.5 Hours a week Mon-Fri 7:30am-4pm (there is some flexibility around these hours) As a Senior Manufacturing Engineer, you will have the opportunity to provide the technical expertise necessary to design, develop, and implement manufacturing systems, complex manufacturing operations and sophisticated machines. You will contribute to the planning and delivery of projects, continually learn and stay abreast of innovative technology, mentor and coach team members, whilst broadening your professional network. Senior Manufacturing Engineer Responsibilities Developing, analysing and managing Manufacturing / Fabrication / Paint / Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic / safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and / or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. What the Senior Manufacturing Engineer will need: Proven manufacturing engineering experience within heavy industry, automotive or a similarly complex production environment Demonstrable expertise in New Product Introduction (NPI) OR substantial manufacturing project management experience Solid knowledge of manufacturing processes, tooling, fixtures and production equipment Experience applying lean manufacturing principles to drive measurable improvements An engineering degree or equivalent hands-on industry experience The vacancy is offering up to £28.80p/h PAYE plus holiday and pension contribution OR up to £39.10p/h Umbrella To apply, please submit a copy of your up to date CV clearly indicating your relevant experience. Applicants must have an existing right to work in the UK and evidence of eligibility will be required. Suitable candidates will be contacted. The above represents a summary of the contract assignment. A full description of this contract assignment is available. A full explanation of this rate and all deductions will be explained in a key information document (KID) supplied to registered candidates
Jun 20, 2026
Contractor
Senior Manufacturing Engineer Peterlee (Site based) 12-month contract 36.5 Hours a week Mon-Fri 7:30am-4pm (there is some flexibility around these hours) As a Senior Manufacturing Engineer, you will have the opportunity to provide the technical expertise necessary to design, develop, and implement manufacturing systems, complex manufacturing operations and sophisticated machines. You will contribute to the planning and delivery of projects, continually learn and stay abreast of innovative technology, mentor and coach team members, whilst broadening your professional network. Senior Manufacturing Engineer Responsibilities Developing, analysing and managing Manufacturing / Fabrication / Paint / Assembly Projects. Assisting in developing department capital and expense budgets as well as maintaining the department capital forecast. - Administering the New Product Introduction (NPI) process to ensure that Engineering drawings are released and processed on time for NPI build. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: ergonomic / safety, efficiency improvements, process bottlenecks, quality concerns. Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Providing the application, procurement, processing, installation and capability of new fabrication, material handling, test, heat treat, welding, painting and / or chemical processes and equipment. Designing, developing and implementing the integration of manufacturing systems including factory control software, scheduling techniques, simulation and systems application. Coordinating, planning, monitoring and reporting the activities associated with the flow analysis, design, financial modelling and implementation of complex manufacturing group technology cells in an assigned area. Coordinating the purchase and application of machine tools, controls and related equipment corporate wide to ensure the latest technology is being used to increase efficiency and economy of operations. Supporting designing complex or intricate jigs and fixtures. What the Senior Manufacturing Engineer will need: Proven manufacturing engineering experience within heavy industry, automotive or a similarly complex production environment Demonstrable expertise in New Product Introduction (NPI) OR substantial manufacturing project management experience Solid knowledge of manufacturing processes, tooling, fixtures and production equipment Experience applying lean manufacturing principles to drive measurable improvements An engineering degree or equivalent hands-on industry experience The vacancy is offering up to £28.80p/h PAYE plus holiday and pension contribution OR up to £39.10p/h Umbrella To apply, please submit a copy of your up to date CV clearly indicating your relevant experience. Applicants must have an existing right to work in the UK and evidence of eligibility will be required. Suitable candidates will be contacted. The above represents a summary of the contract assignment. A full description of this contract assignment is available. A full explanation of this rate and all deductions will be explained in a key information document (KID) supplied to registered candidates
JOB TITLE: New Product Introduction Manager / NPI Manager The COMPANY Our client is a well-established engineering sub-contract organisation who have forged a profitable niche for themselves working, predominantly, within the "Yellow Construction Industry" - diggers, FLT, dumpers, etc. They offer their clients a full engineering solution including laser cutting, press brake, tube bending, fabrication, etc. The ROLE The right candidate would play a key role in supporting continued growth, being responsible for the development and introduction of new products - will ensuring PPAP approved parts are produced to customer specifications. The minutia of the role includes; Cross functional feasibility reviews Tooling design and manufacture Assembly development Handover process for seamless production integration CMM measurement of samples Preparation of PPAP documentation Working closely with suppliers Supporting customers with manufacturing design queries The CANDIDATE Our client is looking for an enthusiastic and dynamic NPI Manager possessing the ambition to forge a career within a successful expanding engineering company. You will possess the following skills; NPI experience A background in engineering and fabrication Ability to multi-task and prioritise based on changing customer demands Knowledge of CMM measuring device 3D CAD would be advantageous Ideally experience working on projects with APQP/PPAP Experience working on projects with APQP/PPAP requirements LOCATION: Suffolk This role is commutable from: Newmarket Mildenhall Cambridge Ely Bury St Edmunds Sudbury Thetford Haverhill Lakenheath Stowmarket Long Melford Saffron Walden Huntingdon Needham Market ALTERNATIVE JOB TITLES: NPI Manager - Fabrication, NPI Engineer - Manufacturing, Senior NPI Engineer - Welding, NPI Manager- Manufacturing Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike. INAND1
Sep 23, 2025
Full time
JOB TITLE: New Product Introduction Manager / NPI Manager The COMPANY Our client is a well-established engineering sub-contract organisation who have forged a profitable niche for themselves working, predominantly, within the "Yellow Construction Industry" - diggers, FLT, dumpers, etc. They offer their clients a full engineering solution including laser cutting, press brake, tube bending, fabrication, etc. The ROLE The right candidate would play a key role in supporting continued growth, being responsible for the development and introduction of new products - will ensuring PPAP approved parts are produced to customer specifications. The minutia of the role includes; Cross functional feasibility reviews Tooling design and manufacture Assembly development Handover process for seamless production integration CMM measurement of samples Preparation of PPAP documentation Working closely with suppliers Supporting customers with manufacturing design queries The CANDIDATE Our client is looking for an enthusiastic and dynamic NPI Manager possessing the ambition to forge a career within a successful expanding engineering company. You will possess the following skills; NPI experience A background in engineering and fabrication Ability to multi-task and prioritise based on changing customer demands Knowledge of CMM measuring device 3D CAD would be advantageous Ideally experience working on projects with APQP/PPAP Experience working on projects with APQP/PPAP requirements LOCATION: Suffolk This role is commutable from: Newmarket Mildenhall Cambridge Ely Bury St Edmunds Sudbury Thetford Haverhill Lakenheath Stowmarket Long Melford Saffron Walden Huntingdon Needham Market ALTERNATIVE JOB TITLES: NPI Manager - Fabrication, NPI Engineer - Manufacturing, Senior NPI Engineer - Welding, NPI Manager- Manufacturing Mana Resourcing is a specialist recruitment company working within the Engineering, Sales, IT and Commercial sectors. We are established to service and support the recruitment requirements of modern businesses and candidates alike. INAND1
