212 jobs found

Job Title: Electrical Technician Location: South Yorkshire (UK wide travel) Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries.Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK. About the Role Assemble and wire bespoke electrical control panels and instrumentation systems. Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units. Carry out mechanical assembly of enclosures, frames, and electromechanical systems. Perform electrical testing, including continuity, functional, and fault-finding activities. Install and commission systems at customer sites, including single- and three-phase electrical installations. Complete electrical wiring, cable routing, termination, and equipment installation. Produce and maintain testing records, site reports, RAMS, and engineering documentation. Support workshop operations, stock control, and continuous improvement activities. Work closely with engineers and project teams to deliver high-quality bespoke systems. About You NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline. 18th Edition Wiring Regulations qualification. Previous experience building and wiring electrical control panels or bespoke electrical systems. Ability to read and interpret electrical schematics and engineering drawings. Experience with panel layout, component mounting, cable routing, termination, and panel fabrication. Practical electrical fault-finding and troubleshooting skills. Experience installing and commissioning electrical systems on customer sites. Good IT skills, including Microsoft Office and electronic documentation. Strong understanding of electrical safety regulations and safe working practices. Full UK driving licence and willingness to travel across the UK (approximately 25%). Desirable Skills Experience working with Siemens, Beckhoff, or other PLC-based control hardware. National Instruments (NI) instrumentation experience. City & Guilds 2391 (Inspection & Testing) or equivalent. ECS/JIB Card. AM2 qualification. IPAF and/or PASMA certification. Experience with EPLAN or similar electrical documentation software. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.

Job Description: Melton Mowbray £39,300- £44,300 DOE + £2,500 Welcome bonus, Performance Bonus & Exceptional Benefits Hours- 37.5 per week: Mon-Fri 7am-3pm Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Reliability Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. The Role Reduce technical downtime by driving the effective implementation of preventative maintenance strategies and continuous improvement initiatives. The role holder is responsible for ensuring full compliance with legislative and corporate requirements, while leading the identification, planning, and delivery of improvement activities within their area of ownership. What's in it for you? Welcome bonus paid in your first week's salary Hot food restaurant on site Career growth opportunities with structured development & Mars University Private healthcare + equal parental leave Generous pension (up to 9% contribution) Life assurance (4x salary) EV salary sacrifice scheme Gym membership & wellbeing support Annual leave starting at 24 days, rising to 32 with service Free parking on site What We're Looking For Proven electrical and control systems expertise within an FMCG environment. Competent in risk assessment, change control procedures, and continuous improvement practices. Experienced in leading Root Cause Analysis (RCA) and fault-finding investigations to resolve technical issues. Strong working knowledge of Rockwell Automation and Schneider Electric control systems and software. Proficient in Microsoft Excel, Microsoft Project, PI ProcessBook, and SAP Planned Maintenance systems. Qualified to minimum GCSE (or equivalent) in English and Maths, with C&G 2382-18 (18th Edition); 2391 Inspection & Testing desirable. Key Responsibilities Ensure technical compliance and drive continuous improvement within the area of ownership. Deliver planned maintenance tasks on time, within budget, and to the required quality standards. Act as a key technical contributor within the factory ownership team. Plan and execute small-scale proactive maintenance projects, including parts, labour, outage planning, communication, and delivery. Lead technical issue resolution and drive clear cross-shift communication of plans within the area of ownership. Maintain accurate records in SAP, represent the area in weekly forums, escalate issues appropriately, and support planning and technical teams as priorities require, including minor PLC modifications. What You Can Expect from Mars Work alongside 130,000+ Associates worldwide guided by our Five Principles Be part of a purpose-driven company shaping "the world we want tomorrow" Access world-class training & development from day one Join a company with an industry-leading salary and benefits package

We're looking for a Senior Revit/CAD Technician to join our MEP team based in Liverpool/Manchester/Leeds. Location: Liverpool/Manchester/Leeds - with agile working opportunity Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £40,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The Senior Revit Technician leads building services coordinated design and 3D modelling (and 2D where required) on large, complex multi-disciplinary projects, delivering sustainable, compliant, and cost-effective solutions typically from concept to construction and handover (RIBA/BSRIA stages 2-6). The role bridges client requirements with engineering delivery, leading multidisciplinary coordination, quality control, and innovation on high value projects. Are you An experienced 3D Revit and 2D CAD Technician with strong M&E coordination experience? Looking to take the next step for a Major Contractor with an in-house turnkey design capability, a secured workload in a variety in industry sectors? Passionate about working for a collaborative, trusted, and delivery focused organisation? Do you Hold a Degree (or appropriate qualification) in Building Services Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? Key Requirements Degree or appropriate qualification in Building Services Engineering or related field Proven senior level experience delivering complex mechanical and electrical 2D and 3D layouts and BIM models Strong technical expertise with clear, concise communication skills Experienced in quality procedures, document control and use of CDE platforms Fluent in use of appropriate industry related software and processes Able to meet BPSS/security requirements Main Responsibilities Lead and execute delivery of high quality MEP coordinated designs and construction level detailed layouts using 3D Revit within a BIM environment, and 2D CAD where required through RIBA/BSRIA stages 2-6 Act as 'lead coordinator' where required and liaise with MEP specialists and manufacturer's, together with other design disciplines and represent MEP engineering in design coordination meetings Offer senior level technical advice in BIM/COBie/Revit/CAD related activities Drive innovation, best practice, BIM implementation and sustainable design solutions Contribute to and produce deliverables in accordance with the BIM Execution Plan (BEP), MIDP and TIDP Prepare and monitor model coordination and drawing output delivery programmes Maintain standards, best practice and clear reporting to senior leaders Develop 3D models and construction documentation (plans, elevations, sections) from sketches or engineers' mark-ups. Coordination: Identify and resolve clashes between architectural, structural, and MEP services and liaise with BIM Coordinators or Information Managers where required. Create, modify, and manage parametric Revit families and project templates. Model Management: Ensure compliance with company standards, quality assurance (QA) procedures, and project standards. Collaboration: Liaise with project stakeholders, attend coordination meetings, and exchange models (e.g., IFC, RVT) with project teams and CDE platforms. Lead outsourced coordination teams from time to time if required to meet workload Identify risk and monitor change control Skills Proficient in Autodesk Revit (3D) and AutoCAD (2D). Experience in BIM coordination and troubleshooting. Proficient with use of all CDE systems for publishing, downloading and reference purposes Proficient with BIM collaboration software Strong understanding of building regulations and construction methods. Ability to interpret engineering sketches and design briefs. Able to coordinate to a wide Level of Detail across all RIBA/BSRIA design stages 1 - 7 Attention to detail and accuracy required in advanced RIBA/BSRIA design stages such as setting out, invert levels etc. Able to incorporate and coordinate MMC/DfMA offsite manufacturing solutions within the model and allow space accordingly Able to incorporate manufacturers Revit families and other asset data into model Able to interpret details, apply and coordinate fire stopping products, manufacturer's and specialist contractor's rulesets and fire protection cladding/intumescent expansion zones to service arrangements within the MEP model to maintain fire integrity. Able to interpret details, apply and coordinate structural/fabric/partition products, manufacturer's and specialist contractor's rulesets and deflection zones to service arrangements within the MEP model to maintain fire integrity. Conversant with COBie deliverables and asset tagging, and able to export information drops and asset/builders work schedules from the model as required Able to model and coordinate underground services and infrastructure (producing Northings/Eastings and invert/cover levels etc) integrating with Civils 3D and below ground survey requirements where available Qualifications & Experience Relevant qualification in Engineering, Computer-Aided Design (CAD) and 3D digital engineering. Proven experience with MEP digital drafting and coordination on complex projects. About Kier Design Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment. We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to .

We're looking for a Senior Revit/CAD Technician to join our MEP team based in Liverpool/Manchester/Leeds. Location: Liverpool/Manchester/Leeds - with agile working opportunity Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £40,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The Senior Revit Technician leads building services coordinated design and 3D modelling (and 2D where required) on large, complex multi-disciplinary projects, delivering sustainable, compliant, and cost-effective solutions typically from concept to construction and handover (RIBA/BSRIA stages 2-6). The role bridges client requirements with engineering delivery, leading multidisciplinary coordination, quality control, and innovation on high value projects. Are you An experienced 3D Revit and 2D CAD Technician with strong M&E coordination experience? Looking to take the next step for a Major Contractor with an in-house turnkey design capability, a secured workload in a variety in industry sectors? Passionate about working for a collaborative, trusted, and delivery focused organisation? Do you Hold a Degree (or appropriate qualification) in Building Services Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? Key Requirements Degree or appropriate qualification in Building Services Engineering or related field Proven senior level experience delivering complex mechanical and electrical 2D and 3D layouts and BIM models Strong technical expertise with clear, concise communication skills Experienced in quality procedures, document control and use of CDE platforms Fluent in use of appropriate industry related software and processes Able to meet BPSS/security requirements Main Responsibilities Lead and execute delivery of high quality MEP coordinated designs and construction level detailed layouts using 3D Revit within a BIM environment, and 2D CAD where required through RIBA/BSRIA stages 2-6 Act as 'lead coordinator' where required and liaise with MEP specialists and manufacturer's, together with other design disciplines and represent MEP engineering in design coordination meetings Offer senior level technical advice in BIM/COBie/Revit/CAD related activities Drive innovation, best practice, BIM implementation and sustainable design solutions Contribute to and produce deliverables in accordance with the BIM Execution Plan (BEP), MIDP and TIDP Prepare and monitor model coordination and drawing output delivery programmes Maintain standards, best practice and clear reporting to senior leaders Develop 3D models and construction documentation (plans, elevations, sections) from sketches or engineers' mark-ups. Coordination: Identify and resolve clashes between architectural, structural, and MEP services and liaise with BIM Coordinators or Information Managers where required. Create, modify, and manage parametric Revit families and project templates. Model Management: Ensure compliance with company standards, quality assurance (QA) procedures, and project standards. Collaboration: Liaise with project stakeholders, attend coordination meetings, and exchange models (e.g., IFC, RVT) with project teams and CDE platforms. Lead outsourced coordination teams from time to time if required to meet workload Identify risk and monitor change control Skills Proficient in Autodesk Revit (3D) and AutoCAD (2D). Experience in BIM coordination and troubleshooting. Proficient with use of all CDE systems for publishing, downloading and reference purposes Proficient with BIM collaboration software Strong understanding of building regulations and construction methods. Ability to interpret engineering sketches and design briefs. Able to coordinate to a wide Level of Detail across all RIBA/BSRIA design stages 1 - 7 Attention to detail and accuracy required in advanced RIBA/BSRIA design stages such as setting out, invert levels etc. Able to incorporate and coordinate MMC/DfMA offsite manufacturing solutions within the model and allow space accordingly Able to incorporate manufacturers Revit families and other asset data into model Able to interpret details, apply and coordinate fire stopping products, manufacturer's and specialist contractor's rulesets and fire protection cladding/intumescent expansion zones to service arrangements within the MEP model to maintain fire integrity. Able to interpret details, apply and coordinate structural/fabric/partition products, manufacturer's and specialist contractor's rulesets and deflection zones to service arrangements within the MEP model to maintain fire integrity. Conversant with COBie deliverables and asset tagging, and able to export information drops and asset/builders work schedules from the model as required Able to model and coordinate underground services and infrastructure (producing Northings/Eastings and invert/cover levels etc) integrating with Civils 3D and below ground survey requirements where available Qualifications & Experience Relevant qualification in Engineering, Computer-Aided Design (CAD) and 3D digital engineering. Proven experience with MEP digital drafting and coordination on complex projects. About Kier Design Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment. We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to .

We're looking for a Senior Revit/CAD Technician to join our MEP team based in Liverpool/Manchester/Leeds. Location: Liverpool/Manchester/Leeds - with agile working opportunity Hours: 40 hours per week - some flexibility on hours available if desired, just let us know when you speak to us. Salary: Starting from £40,000 per annum Sector: MEP - across a variety of industry sectors We are unable to offer certificates of sponsorship to any candidates in this role. The Senior Revit Technician leads building services coordinated design and 3D modelling (and 2D where required) on large, complex multi-disciplinary projects, delivering sustainable, compliant, and cost-effective solutions typically from concept to construction and handover (RIBA/BSRIA stages 2-6). The role bridges client requirements with engineering delivery, leading multidisciplinary coordination, quality control, and innovation on high value projects. Are you An experienced 3D Revit and 2D CAD Technician with strong M&E coordination experience? Looking to take the next step for a Major Contractor with an in-house turnkey design capability, a secured workload in a variety in industry sectors? Passionate about working for a collaborative, trusted, and delivery focused organisation? Do you Hold a Degree (or appropriate qualification) in Building Services Engineering or related subject? Bring experience of working across both public and private sector projects? Want to work for a highly regarded Main Contractor, recognised as a Top 30 employer on Glassdoor? Key Requirements Degree or appropriate qualification in Building Services Engineering or related field Proven senior level experience delivering complex mechanical and electrical 2D and 3D layouts and BIM models Strong technical expertise with clear, concise communication skills Experienced in quality procedures, document control and use of CDE platforms Fluent in use of appropriate industry related software and processes Able to meet BPSS/security requirements Main Responsibilities Lead and execute delivery of high quality MEP coordinated designs and construction level detailed layouts using 3D Revit within a BIM environment, and 2D CAD where required through RIBA/BSRIA stages 2-6 Act as 'lead coordinator' where required and liaise with MEP specialists and manufacturer's, together with other design disciplines and represent MEP engineering in design coordination meetings Offer senior level technical advice in BIM/COBie/Revit/CAD related activities Drive innovation, best practice, BIM implementation and sustainable design solutions Contribute to and produce deliverables in accordance with the BIM Execution Plan (BEP), MIDP and TIDP Prepare and monitor model coordination and drawing output delivery programmes Maintain standards, best practice and clear reporting to senior leaders Develop 3D models and construction documentation (plans, elevations, sections) from sketches or engineers' mark-ups. Coordination: Identify and resolve clashes between architectural, structural, and MEP services and liaise with BIM Coordinators or Information Managers where required. Create, modify, and manage parametric Revit families and project templates. Model Management: Ensure compliance with company standards, quality assurance (QA) procedures, and project standards. Collaboration: Liaise with project stakeholders, attend coordination meetings, and exchange models (e.g., IFC, RVT) with project teams and CDE platforms. Lead outsourced coordination teams from time to time if required to meet workload Identify risk and monitor change control Skills Proficient in Autodesk Revit (3D) and AutoCAD (2D). Experience in BIM coordination and troubleshooting. Proficient with use of all CDE systems for publishing, downloading and reference purposes Proficient with BIM collaboration software Strong understanding of building regulations and construction methods. Ability to interpret engineering sketches and design briefs. Able to coordinate to a wide Level of Detail across all RIBA/BSRIA design stages 1 - 7 Attention to detail and accuracy required in advanced RIBA/BSRIA design stages such as setting out, invert levels etc. Able to incorporate and coordinate MMC/DfMA offsite manufacturing solutions within the model and allow space accordingly Able to incorporate manufacturers Revit families and other asset data into model Able to interpret details, apply and coordinate fire stopping products, manufacturer's and specialist contractor's rulesets and fire protection cladding/intumescent expansion zones to service arrangements within the MEP model to maintain fire integrity. Able to interpret details, apply and coordinate structural/fabric/partition products, manufacturer's and specialist contractor's rulesets and deflection zones to service arrangements within the MEP model to maintain fire integrity. Conversant with COBie deliverables and asset tagging, and able to export information drops and asset/builders work schedules from the model as required Able to model and coordinate underground services and infrastructure (producing Northings/Eastings and invert/cover levels etc) integrating with Civils 3D and below ground survey requirements where available Qualifications & Experience Relevant qualification in Engineering, Computer-Aided Design (CAD) and 3D digital engineering. Proven experience with MEP digital drafting and coordination on complex projects. About Kier Design Kier Design are a top-25 engineering consultancy, delivering a wide range of services across all sectors of the built environment, providing construction-focused, innovative and sustainable solutions. We have preferential access to Kier's £11bn+ project pipeline, including mega projects like High Speed 2 and Hinkley Point C, frameworks with national and local government and other public bodies, and a range of other interesting projects in every sector of the built environment. We believe in building teams around our people, rather than squeezing people into our teams, we want to help you carve out a role in which you'll grow and thrive for many years to come. Offering market-leading development opportunities, supporting our graduates through the early stages of their careers, enabling our people to become professionally qualified, providing management training and qualifications, and supporting ongoing technical development throughout our people's careers. Actively promoting, so you can keep pushing and stretching yourself. Rewards and benefits We're proud to be able to offer our brilliant people a wide variety of benefits that you can tailor to your needs. You can see more information of benefits here . Diversity and inclusion Making Kier a diverse and inclusive place to work is a huge priority for us. We're proud of the steps we've taken so far, but we know we must always do more. Our employees are key in shaping Kier's diversity and inclusion initiatives and our people have made a huge impact on how we work, by using their experiences to shape our policies. You can see our D&I action plan here . As a Disability Confident employer, we will ensure that a fair and proportionate number of disabled applicants that meet the minimum criteria for this role will be offered an interview. We look forward to seeing your application to .

Electrical Assembly Technician Heywood, commutable from: North Manchester, Rochdale, Bury, Bolton, Farnworth, Middleton, Oldham, Prestwich, Radcliffe & all surrounding areas £28,000 - £32,000 + Overtime + Training + Career Progression + Pension + Life Assurance + Excellent Company Benefits Are you an Electrical Technician/Assembly Technician, looking for a Monday to Friday days-based role with an early Friday finish and overtime earning potential? This is an excellent opportunity to become part of a growing technical team producing specialist electrical equipment that supports critical healthcare, pharmaceutical and laboratory environments across the UK and Europe. Working from the company's state of the art manufacturing facility you'll be involved in building high-specification electrical assemblies from detailed wiring diagrams, with the chance to boost your salary through overtime. The company are the established leader within their specialist industry sector and they are currently undergoing an exciting phase of growth and have invested heavily in their facilities, technology and people, making now an exciting time to join. This position would suit somebody from an electrical assembly background looking for a good work life balance and a quality employer. The Role: Build and wire control panel & assemblies Carry out fault finding, testing and diagnostics Monday to Thursday 7am - 3.30pm, Friday 7am - 1pm The Candidate: Previous experience within a Panel Wirer or Electrical Assembly role 18 edition or looking to gain this qualification Reference Number: BBBH275983 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Patrick Simper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Test Team Leader (TTL) - EC&I Commissioning Location: Reading Contract Type: Out of Scope 6-month Contract A leading UK engineering and maintenance services provider is seeking a Test Team Leader to support complex projects across highly regulated industries. The organisation delivers asset lifecycle solutions including consulting, engineering, manufacturing, installation, operations, maintenance, and decommissioning. With a strong presence across sectors such as nuclear, energy, oil & gas, and industrial infrastructure, the business operates multiple UK offices and employs a large, highly skilled workforce committed to safety, quality, and operational excellence. Key Responsibilities Provide technical leadership and guidance to the commissioning test team Complete and manage all relevant project documentation Perform commissioning and testing on instrumentation and control systems in line with approved procedures Carry out commissioning activities across control circuits, VSDs, AHUs, and various control devices (level, flow, temperature, pressure) Supervise and execute commissioning procedures with support from the Project Commissioning Engineer Interpret and work from technical documentation including drawings, schematics, and manuals Troubleshoot issues and implement corrective actions to support successful project delivery Lead on technical quality requirements and ensure adherence to company processes and standards Allocate tasks, monitor progress, and support team performance Build and maintain effective working relationships across teams and departments Ensure full compliance with health & safety procedures and safe systems of work Support project delivery, scope management, and identification of variations/opportunities Assist in risk identification and mitigation throughout the project lifecycle Provide strong health & safety leadership by example Key Activities Conduct or manage site surveys Facilitate toolbox talks where required Develop test specifications and methodologies in collaboration with the team Produce site documentation including risk assessments, method statements, and test documentation Support development of Operations & Maintenance (O&M) documentation Oversee integrated system testing, including FAT, SAT, and installation/calibration testing Manage observations, variations, and rework activities Qualifications & Experience Strong background in Electrical, Control & Instrumentation (EC&I) Previous experience within highly regulated environments (e.g. nuclear) Proven experience supervising or leading teams of electrical/instrument technicians Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Bodyshop Quality Controller Location: Atherton Salary: £40,000 - £45,000 Basic Salary OTE £50,000 Job Type: Full-Time, Permanent Looking for a role where your experience is valued, your attention to detail makes a real impact, and your earning potential reflects your expertise? This is an excellent opportunity for an experienced Bodyshop Quality Controller to join a professional accident repair environment where quality comes first. With a competitive salary, achievable earning potential, and flexible start times, this role offers the work-life balance and stability many Bodyshop professionals are looking for. If you're currently working as a Senior Panel Beater, Paint Technician, Workshop Controller, or Quality Controller and want to take the next step in your career, this position provides the opportunity to work within a modern repair facility, ensuring every vehicle leaves the workshop to the highest possible standard. What's In It For You? Basic Salary of £40,000 - £45,000 depending on experience OTE of £50,000 Monday to Friday working pattern Flexible start times between 7:00am and 6:00pm 40-hour working week Permanent, full-time position Modern Bodyshop environment Career progression opportunities The Role As a Bodyshop Quality Controller, you will be responsible for ensuring all repairs are completed to the highest standards before vehicles are returned to customers. You will act as the final checkpoint within the repair process, maintaining quality, safety, and customer satisfaction. Key responsibilities include: Carrying out final quality inspections on completed vehicle repairs Checking panel, paint, and mechanical repairs against manufacturer and company standards Identifying and resolving quality concerns before vehicle handover Working closely with technicians, painters, and workshop management Ensuring all repairs meet safety and compliance requirements Maintaining accurate quality control records and documentation Supporting continuous improvement within the bodyshop operation Delivering exceptional standards of workmanship and presentation About You Previous experience as a Bodyshop Quality Controller, Workshop Controller, Senior Panel Beater, Paint Technician, or Accident Repair Quality Inspector Strong understanding of vehicle repair processes within a Bodyshop environment Excellent knowledge of panel, paint, and cosmetic repair standards High attention to detail and commitment to quality Ability to identify defects and implement corrective actions Strong communication and organisational skills Able to work effectively within a fast-paced workshop environment Full UK Driving Licence preferred Apply Today This is an excellent opportunity to join a well-established accident repair operation that values quality workmanship, offers long-term stability, and provides genuine opportunities for career development. If you're looking for a position where your experience and eye for detail will be recognised and rewarded, we'd love to hear from you. Apply now for immediate consideration. Job reference 54037.

Mobile Maintenance Technician (Electrical Bias) Patchway, Bristol 38,000 + Van and Fuel Card Brief Mobile Maintenance Technician needed for large, well-known Facilities Management organisation based in Bristol who are looking to employ an experienced and well-rounded Maintenance Technician that takes pride in their work with an in-depth knowledge of maintenance on HVAC, electrical, UPS, generators, and building control systems. The successful candidate would desirably have a relevant qualification- i.e. 18th Edition etc. and have a keen interest in maintenance. If you have commercial facilities management experience that would be a plus! Benefits Salary: 38,000 per annum plus Van and fuel card 24 day's Holiday plus Public Holidays Life Cover equivalent to 1.5 times annual salary Employee discount shopping schemes on major brands and retailers Gym membership discounts Holiday purchase scheme 2 corporate social responsibility days per year Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes Attractive Employee Referral Rewards Scheme 24/7 Employee Assistance Program and access to mental wellbeing app What the role entails: Some of the main duties of the Mobile Maintenance Technician will include: Maintain and operate building services systems, including HVAC, UPS, generators, and electrical equipment Respond promptly to faults and failures, ensuring minimal downtime Supervise contractors and ensure quality and safety standards are met Conduct regular inspections, audits, and record-keeping for compliance Manage parts ordering and control room handovers Perform controlled switching on HV and LV systems as authorised Support shift planning and maintaining housekeeping standards What experience you need to be the successful Mobile Maintenance Technician : 5+ years' experience in building services, maintenance or engineering Knowledge of BEMS, HVAC, UPS, generators, fire/life safety, and water treatment systems 18th Edition IEE Wiring Regs trained Strong communication skills and proactive approach Basic IT skills; PFI contract experience preferred Due to the nature of the contract, successful postholder must be able to obtain and maintain security vetting This really is a fantastic opportunity for a Mobile Maintenance Technician to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Main Purpose of the Role: Peopleforce Recruitment are hiring for a technician in Witney! This role includes carrying out basic production, testing, and support tasks under supervision, following established procedures and company policies. The role focuses on accuracy, safety, and maintaining quality standards. Nightshift: 7pm-7am on a 4 on 4 off shift pattern. 17.19 Main Responsibilities: Operate manufacturing and laboratory equipment according to standard procedures Follow instructions to produce medical products safely and correctly Monitor processes and check that products meet quality standards Measure, prepare, and handle materials as required Inspect products and materials for faults or defects Record data accurately in company systems and complete documentation Carry out basic product testing and support lab activities where required Handle, store, and move materials, including stock control tasks Maintain clean, safe, and organised work areas in line with housekeeping standards Follow all health and safety regulations, including use of PPE Report issues, accidents, or equipment problems promptly Work with team members and communicate effectively Complete tasks on time and follow training requirements General Expectations: Follow company policies, procedures, and code of conduct at all times Maintain good timekeeping and attendance Ensure all work is carried out safely and in compliance with regulations Be willing to learn, improve, and support team activities Qualifications: Basic education including Maths and English No advanced experience required (entry-level role)

Optical Lab Technician Mayfair, Central London Up to £30,000 + Excellent Benefits Join a Premium Independent Optical Practice in the Heart of Mayfair Looking for your next opportunity within a luxury optical environment? Located in the prestigious heart of Mayfair , this exceptional independent practice combines cutting-edge optical technology with outstanding craftsmanship and first-class patient care. Surrounded by some of London's finest boutiques, restaurants and iconic landmarks, you'll be joining a practice that is renowned for quality, precision and luxury eyewear. We're looking for a skilled and detail-oriented Optical Lab Technician to become part of this friendly and professional team, helping deliver the highest standards of spectacle glazing, repairs and quality control. The Role As an Optical Lab Technician, you'll play a vital role behind the scenes, ensuring every pair of spectacles meets the highest standards before reaching the patient. Your responsibilities will include: Glazing and assembling prescription spectacles to an exceptional standard Carrying out frame adjustments, repairs and maintenance Performing quality control checks to ensure accuracy and precision Working with luxury frames and premium lenses Supporting the dispensing team with technical queries Maintaining lab equipment and ensuring a clean, organised workspace Managing stock and lab supplies where required Helping deliver a seamless experience from order to collection What's on Offer? This is a fantastic opportunity to work within a highly regarded independent practice where craftsmanship and quality are at the heart of everything they do. You'll enjoy: Salary up to £30,000 Excellent holiday allowance Ongoing training and professional development Supportive and experienced team Modern, well-equipped laboratory The opportunity to work with luxury eyewear brands and premium optical products A central London location with excellent transport links Who We're Looking For We're looking for someone who has: Previous experience as an Optical Lab Technician or within an optical laboratory Excellent attention to detail and a passion for precision Experience glazing, repairing and assembling spectacles Strong organisational and time management skills A positive attitude and the ability to work well within a team Pride in producing high-quality work If you're looking to join a premium independent practice where your technical skills will be recognised and valued, we'd love to hear from you. Apply today or contact Lunaria Recruitment for a confidential conversation.

Job Description About the Role The Generator Technician will play a key role in supporting NOV's Portable Power business, delivering high-quality service and technical expertise to our customers. Based in Great Yarmouth, this position involves hands-on work across installation, commissioning, servicing, and maintenance of generator systems and associated equipment. The majority of work will be UK-based, with occasional opportunities to support projects globally. Success in this role will depend on strong electrical expertise, a proactive approach to problem-solving, and the ability to work both independently and as part of a team in demanding environments, including offshore and wind farm sites. About the Company NOV delivers technology-driven solutions that support the global energy industry. We are known for innovation, quality, and reliability, supporting customers across drilling, completion, production, and industrial markets. Our Portable Power business provides critical power solutions to customers across Europe, supporting both traditional oil & gas and renewable energy sectors. What We Offer Diverse project exposure - primarily UK-based work with opportunities for international assignments Hands-on technical role - real impact on installations, commissioning, and servicing activities Exposure to both oil & gas and renewable (wind) environments Strong safety culture - clear procedures and high HSE standards Competitive compensation and benefits package (country-specific) Career development - opportunities to expand technical expertise across multiple systems and technologies Key Responsibilities Deliver installation, commissioning, servicing, and maintenance of generator systems and associated equipment Perform scheduled maintenance, repairs, and refurbishment in line with NOV procedures Conduct electrical completion checks, function tests, loop checks, and site acceptance tests Support factory acceptance testing (FAT) and P&ID walkdowns Provide after-sales support including inspections, technical advice, and spare parts recommendations Liaise with workshop teams, project teams, clients, and vendors Prepare and complete work orders and technical documentation Participate in on-call rota to provide responsive customer support Ensure all work is carried out safely and in compliance with HSE standards Travel to onshore and offshore sites, including physically demanding environments (e.g., climbing structures) Qualifications & Skills Essential: Strong electrical knowledge within installation, commissioning, servicing, and maintenance environments (including offshore) Ability to interpret and mark up engineering drawings Knowledge of relevant industry standards Willingness and ability to travel offshore and work in physically demanding environments Desirable: City & Guilds 2382-18 (18th Edition) City & Guilds HV Switching & System Control (0672) COMPEX certification Experience with diesel and gas-driven generators Experience with Cummins, Iveco, or Perkins engines Knowledge of Deep Sea control systems PLC programming skills Soft Skills Strong problem-solving mindset and ability to work under pressure Ability to work both independently and within a team Good communication skills with internal and external stakeholders High level of reliability, ownership, and safety awareness Flexibility and adaptability to dynamic environments Why Join Us? You'll join a global organisation where safety, quality, and innovation are at the core of everything we do. This role offers a unique opportunity to work in a technically challenging environment across both traditional and renewable energy sectors. Join our Global Family: We offer an inspiring place to work with opportunities to develop your skills and collaborate with experienced professionals across the industry. At NOV, you will be part of a culture that values teamwork, technical excellence, and continuous improvement. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.

Job title: Quality Engineering Technician Job location: Basildon Rate: 20.64 Hours per week: 37 Duration: 6 months Start date: ASAP Client Summary: A leading, well recognised global manufacturer of Agricultural machinery Position Summary: Responsible for supporting the Quality functions through the inspection, validation, and rework of components and vehicles. The role will ensure finished products meet engineering specifications as well support the identification, investigation, and resolution of quality issues. This will encompass inspection duties across, warehouse, lineside, and finished vehicles. Roles can include: Inspect and validate components against engineering drawings, specifications, and test criteria Investigate quality concerns, capturing data and supporting root cause analysis Support resolution of product quality issues in collaboration with internal teams and external suppliers Communicate quality concerns and updates in a timely manner Prepare and maintain quality reports and performance metrics (KPIs) Support audits and ensure timely closure of actions Review PPAP and quality documentation (e.g. IRW's, deviations, change requests, PIRs) Implement containment, rework, and corrective actions to minimise defects and scrap Manage and control non-conforming (reject) material, including quarantine processes Support incoming inspection of previously identified defect components Coordinate shipment of parts for internal and external analysis, including relevant documentation Manage rework and containment activities, including external contractors where required Support compliance with company systems and processes (e.g. SAP, quality systems) Assist with the development and implementation of testing and inspection plans Maintain and support compliance of test equipment Contribute to continuous improvement activities, including Kaizens Person Profile/Experience: Ability to read and interpret technical drawings (including GD&T) Strong problem-solving skills with knowledge of structured methodologies (e.g. 8D, PDCA, DMAIC) Practical understanding of manufacturing processes and quality control Strong IT skills, including Microsoft Office, SIGIP, Teamcenter, Azure and familiarity with ERP/quality systems Knowledge of quality tools such as FMEA and control plans Strong communication skills, both written and verbal Ability to manage multiple tasks and priorities effectively Proactive, self-motivated, and able to work in a fast-paced environment Qualifications: Driving Licence Minimum 3 years' experience in a manufacturing or quality environment Relevant engineering qualification or equivalent experience preferred Contact Information: James Bell Email: (url removed)

The Force s Data Architect is accountable for the design and build of the Force s overall data architecture, taking full responsibility for its implementation and its ability to serve the data required to produce information, intelligence and insights products for the Force and its partners. The role is integral the Force being able to create value from the vast amount of data it collects, in particular the data it uses to create intelligence, carry out research and investigations, and make decisions across all levels, commands and services, from strategic to operational, to stop crime and ASB, to protect people from harm and to help those in need. They will make a significant contribution to both force and regional data strategy, championing the importance of good data architecture across policing, advising on and building the right data structures, and they will lead any significant data projects that will to help the Force achieve its priorities and outcomes. The role requires a highly comprehensive level of knowledge and functional understanding of the modern tools, technicians, technologies, platforms, standards and practices of the data professions and industry, with an innate ability to explain their purpose, use and value to non-technical people. They will cultivate strong and effective working relationships with individuals, teams and colleagues, both internal and external to the Force, and they will be expected to participate in regional design authorities representing the interests of the Force in national data strategy and architecture. The role holder will demonstrate the Force values at all times, and they will carry out the functions of this role in accordance with the principles of the Code of Ethics. The aim of the Code of Ethics is to support each member of the policing profession to deliver the highest professional standards in their service to the public. CORE WORK AREAS Leadership Subject matter expert on data architecture for the Force and, as required provides expertise to partner organisations, and representing the Force s interest in regard to data. Accountable, on behalf of the Chief Technical Information Officer (CTIO) for the design and build of the Force s overall data architecture, taking full responsibility for its implementation. Responsible for the management, storage and provision of the data required to produce information, intelligence and insights products for the Force and its partners. Accountable for the selection and adoption of appropriate data tools, technologies, and frameworks to optimise data management and enhance data analytics capabilities across the Force. Provides technical leadership and mentorship to the data engineering, data analysis and BI development team, guiding them in best practices for these disciplines. Works in partnership with the Solutions Manager and their Principal Developer and Principal Database Administrator to continually develop the services and technical skills of the teams that make up the digital and data solutions department. Data Architecture Design Engages in national and regional data strategy. Develops, implements, and maintains a comprehensive and robust data architecture strategy, aligned to the strategic aims and the data-drive initiatives of the Force. Designs data models, data flows and integration and data storage that enable efficient and accurate data collection, integration, and analysis. Data Solutions Partners with and guides chief officers and heads of department across the Force to help them understand what is possible with data, turning their visions into tangible data solutions working together to build any related business case for investment and lead on its implementation. Works closely with performance, intelligence and data analysts, engaging with operational subject matter experts to understand and define the analytical requirements of the Force. Translates these requirements into effective data models, marts and structures that will support the production of the Forces analytics, predictive modelling and reporting capabilities. Data Governance Leads on the defining of the Force s data classification and standards, ensuring these are in line with these being defined nationally for crime and justice. Works with Head of IMU, Head of ICT Operations and both their senior teams to establish the Force s data access control mechanisms to maintain compliance with legal and regulatory requirements. Data Literacy and Quality Collaborates and fosters a data-driven culture by promoting data literacy, data governance practices, and data- driven decision-making across the organization. Establishes and works with cross-functional teams to identify and resolve data-related issues. Research, analyse and appraise the root cause, driving forward any relevant improvements to any processes, practices, and policies. Data Sources and Integration Investigates available data sources internally and externally, identifying opportunities to maximize the value that the organisation achieves from these assets and define processes to acquire and validate this data to make it usable. Maps data from source to target and establish current & future state based on business data requirements. Undertakes significant data migration programmes as required. Emerging Technologies Actively participates in professional networks seeking out emerging trends, advancements, and innovations in the field of data architecture and data management practices. Identifying opportunities, evaluates and introduces new tools, frameworks, and technologies where they will enhance the efficiency and effectiveness of policing data management.

ROLE TITLE: Duty Technician LOCATION: Hursley - 4 days on 4 days off - 7am to 7pm / 7pm to 7am rotaing shifts CLEARANCE: The ideal candidate will have active SC Clearance or be eligible to undergo SC Clearance. SALARY: 41,000 per annum We are actively looking to secure a Duty Technician to join Experis. Experis Consultancy is a Global entity with a well-established team with over 1000 consultants on assignment across 20 clients globally. Our UK operation is growing and has very aggressive plans for expansion over the coming years. We form part of the Manpower group of companies that turn over $20 billion a year collectively. Experis UK have partnerships with major clients across the UK spanning multiple industries; our approach is a very personal one, with both our clients and our own employees. We are passionate about training, technology and career development. Job Purpose/The Role: The Duty Technician plays a crucial role in maintaining the smooth operation of our supply chain processes. This position requires a detail-oriented individual who can handle various tasks related to inventory management, equipment maintenance, and quality control. The ideal candidate should have strong technical skills, excellent problem-solving abilities, and a solid understanding of supply chain principles . Required Skills: To handle incoming technical support incidents, requests and changes. Management of personal call queue, ensuring calls are closed in a timely fashion. Provide updates and ensure ongoing customer communication is maintained. Resolution of calls ranging from simple password resets to complex server queries. Escalation of calls to 3rd Line Team as necessary. To work as part of a close-knit and highly skilled team of Engineers. Provide excellent customer service. Work with other internal teams (3rd Line Technical Delivery Teams, Development, Projects, etc.) Perform software builds/re-builds on PCs and laptops as required. Fix hardware faults and install upgrades to client hardware. Benefits Include: Contributory pension scheme Employee Assistance Program Medical and Dental cover 22 days holiday + bank holidays Maternity Pay/Shared Parental leave and paternity leave Sick pay Suitable Candidates should submit CVs in the first instance. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

Imperial Recruitment Group are delighted to announce that we are working on a retained basis with Walker Filtration to recruit a new Mechanical Design Engineer for their Filtration Systems division, based at their Washington site. LOCATION: Washington SALARY: Competitive LENGTH OF CONTRACT: Permanent ROLE SUMMARY: Walker Filtration was acquired by the Atlas Copco group in March 2018 and has the mission to become the Global Competence Centre for Compressed air, Gas and Vacuum Filtration within the group. Walker Filtration has its factory and headquarters in the North of England but employs around 330 people worldwide with Customer Centres in the United States, Europe and Japan. The purpose of this role is to drive Walker Filtration's vision of being a competence centre for Industrial Filtration and Medical product ranges. The Design Engineer does this through the design, development and maintenance of new and existing market leading products. Reporting to the Engineering Manager, working as part of the engineering design team, the role is very much 'hands on' where you will be tasked with creating innovative designs to expand our current product portfolio. The role will also be involved with maintaining existing product ranges, with projects focused on optimisation and cost savings. Leading the delivery of assigned projects to ensure they're on time, to budget and of optimum quality. DUTIES ARE BUT NOT LIMITED TO: The design, development, verification and implementation of technically innovative and commercially competitive new products More specifically, the design, development or selection and packaging of compressed air and gas treatment products including pressure vessels, pneumatic control systems, compressors, vacuum pumps, desiccant dryers, etc. To ensure that all component parts and products are designed in strict compliance with mandatory national and international regulatory requirements and standards, as appropriate Compile and manage technical construction files as appropriate to the product Create and manage Bills of Material (BoMs) throughout the product lifecycle The maintenance and improvement of existing products and components to improve quality production efficiency and cost reduction. To lead projects when required, ensuring that projects are delivered on time, to budget, and engineering quality is of primary importance The production and maintenance of technical documentation, including CAD drawings, costing data, design calculations, test data etc. Support prototype development and testing, including troubleshooting issues and refining designs based on test results Work closely with suppliers to ensure designs are manufacturable, material selection is optimal and that target cost is met Filtration and Medical product and application knowledge to support queries from both internal and external customers Maintain high quality standards of engineering process according to QA standards and the CtP (Concept to Product) 2.0 business process Support the design review process such that all product designs are market leading and that lessons learned are a key part of product development Manage personal workload to ensure timing and commitments are realistic and achieved Support the intellectual property process to ensure patents, or similar, are technically robust and supported through the application and granting process Provide specialist technical support during customer and supplier meetings and visits, as required Provide technical support to the Operations team, as required Promote a culture of collaboration across Walker Filtration and the wider Atlas Copco Group Assist in the development and training of more junior Engineers, Technicians and Apprentices as appropriate/required TO BE CONSIDERED FOR THIS ROLE YOU WILL HAVE: A relevant mechanical Engineering Degree (preferably post-graduate), or have relevant experience in the role Demonstrable experience in a product design and development role with a demonstrable and proven track record of new product development success. Proficient 3D CAD & PLM user. A natural energy with a positive attitude to the role. Self-motivated, systematic, controlled and well organised, building professional relationships, instilling confidence and trust. Attention to detail with a diligent and pragmatic 'no-nonsense' approach to task and project completion is essential A drive to perform tasks properly and thoroughly while adhering to company guidelines, procedures and policy. Decisive; possess the ability to rationalise and make reasoned technical and commercial decisions particularly under pressure. Commercially astute Communicates proficiently and effectively at all levels. Can compile and present accurate technical and general business documentation. Strong abilities in concept generation, mechanical design, DFMEA process, design for production and service. For more information on this opportunity please feel free to contact Adam Pearson at Imperial Recruitment Group. Imperial Recruitment Group is committed to being an equal opportunities employer. We celebrate diversity and are dedicated to creating an inclusive environment for all employees. We welcome applications from individuals of all backgrounds, experiences, and abilities, ensuring fair treatment throughout the recruitment process.

Service & Repair Technician A well-established manufacturer of high quality, specialist equipment now has a need for an additional Service & Repair Technician. The organisation offers excellent working conditions, career development and benefits. The Service Technician will support the service team by carrying out a wide range of hands-on engineering and workshop activities. This role is ideal for an experienced mechanical Technician/Engineer who enjoys practical fault-finding, repairs and testing, in a workshop environment. Role responsibilities include: Workshop Engineering Support Carry out strip-down, inspection, repair, build, and reassembly of components and systems. Support the service team with workshop-based tasks, including preparation and completion of service work. Produce clear and accurate inspection reports and repair documentation. Testing and Quality Carry out functional testing of repaired or serviced equipment. Ensure work is completed to required quality and safety standards. Workshop Control Maintain good standards of workshop organisation and housekeeping. Manage workshop stock, tools, and test equipment. Maintain existing work and test kits and assist with the preparation of new kits as required. Equipment and Product Handling Clean, check, and prepare hire equipment Carry out general repairs on returned customer equipment and systems. Test calibrated products, following documented procedures. Skills & Experience: Mechanical engineering background with hands-on workshop experience. Strong fault-finding and problem-solving skills. Basic electrical wiring and repair skills desirable but training will be provided Ability to write clear and accurate reports. Good communication skills, both verbal and written. Previous experience working in a service or repair environment. Interested, please contact Graeme at Vibe Recruitment on (phone number removed) or apply immediately Vibe Recruit is acting as an Employment Agency in relation to this vacancy.

Laboratory Technician - Metallurgy - (phone number removed) - £23.60/hr umbrella rate Do you have metallurgical expertise in steel and aluminium? along with knowledge and operational experience with materials testing equipment? Are you ready to take your career to the next level? This exciting opportunity as a Laboratory Technician - Metallurgy offers you the chance to work on cutting-edge projects within the quality assurance and manufacturing sector. This role is perfect for someone looking to make a tangible impact in a fast-paced industry. You'll be part of a team driving innovation and excellence in battery and frame assembly, contributing to industry-leading processes. What You Will Do: - Operate metallurgical and mechanical preparation equipment to assess components according to engineering specifications and drawings. - Conduct routine quality control testing for Electric Drive Unit (EDU), battery, and frame assemblies. - Perform teardowns of stators and frames using destructive equipment like bandsaws. - Carry out visual weld inspection testing and ultrasonic testing of spot welds. - Use optical microscopes to measure welds, rivets, and porosity content, as well as radiographic analysis of components. - Collaborate with cross-functional teams to investigate and resolve product quality issues. What You Will Bring: - Practical experience using preparation equipment such as bandsaws, abrasive cutters, grinding, polishing, and etching tools. - Knowledge and operational experience with materials testing equipment, including optical microscopes, hardness testers, tensile testers, and FTIR, among others. - Metallurgical expertise in steel and aluminium, with the ability to apply this knowledge effectively. - Proficiency in interpreting engineering drawings and specifications. - Solid computer skills, including familiarity with Excel, Word, and PowerPoint. This role is integral to supporting the company's commitment to quality and innovation. By ensuring compliance with standards such as IATF 16949 and ISO 14001, you'll play a vital part in maintaining the integrity and excellence of its processes. The position also offers the opportunity to contribute to the launch of business-critical projects, making your work impactful and rewarding. Location: This role is based in Wolverhampton, providing easy access to a thriving industrial hub. Interested?: If you're ready to take on this exciting challenge as a Laboratory Technician - Metallurgy, don't wait! Apply today and join a team dedicated to driving quality and innovation in the manufacturing industry. This role is Inside IR35. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.