Overview A Fire & Security Service Engineer is responsible for the installation, maintenance, servicing, and repair of fire detection systems, intruder alarms, CCTV, access control, and other life-safety or security technologies. Small works (Installation) of the aforementioned systems are also included in this role. The role ensures systems remain compliant, reliable, and fully operational for commercial, industrial, and residential clients. Key Responsibilities • Service, maintain, and repair fire alarm systems, intruder alarms, CCTV, access control, and emergency lighting. • Carry out planned preventative maintenance (PPM) in line with industry standards and manufacturer guidelines. • Diagnose faults and implement effective solutions to restore system functionality. • Install and commission new fire and security systems when required. • Ensure compliance with relevant standards such as BS 5839, BS 5266, NSI, and FIA guidelines. • Complete accurate documentation, including service reports, certificates, and asset registers. • Provide technical support and advice to customers on system performance and upgrades. • Participate in on-call rota to provide emergency support outside normal working hours. • Maintain tools, equipment, and company vehicle to a high standard. • Adhere to health & safety procedures and site-specific requirements. Skills & Experience • Proven experience servicing fire alarm and/or security systems. • Strong understanding of industry standards and regulatory requirements. • Ability to read technical drawings and interpret system schematics. • Competent in fault-finding and problem-solving. • Good communication and customer-service skills. • Ability to work independently and manage workload effectively. • Full UK driving licence. Desirable Qualifications • FIA training units (e.g., Fundamentals, Design, Installation, Maintenance). • Electrical qualifications (e.g., NVQ Level 3, City & Guilds). • Experience with major brands such as Gent, Advanced, Kentec, Morley, Honeywell, Texecom, Hikvision, Paxton, etc. • Knowledge of networking for IP-based systems. • IPAF certification will be required Personal Attributes • Professional, reliable, and self-motivated. • Strong attention to detail. • Comfortable working in varied environments. • Positive attitude and willingness to learn new technologies. Training, phone, laptop, vehicle provision • Training is available for all disciplines. We would like to see any previous certification the candidate has achieved if available. The Following is provided Company vehicle - Van Petrol card Company pension scheme Laptop Mobile phone (PDA) ID Card Calibrated meter PPE equipment Uniform De Walt drill set provided Working hours , call out rota and subsistence • Normal working hours are Monday to Friday 8:30am to 5:30pm. • We have a call out rota in place. There is standby payment for each night the engineer is on call - £25.00 per day Monday to Friday, and £50.00 per day at weekends and £100.00 for bank holidays. • Out of hours call outs are paid from the time the engineer leaves home until they arrive back home. • Overtime is paid at time and a half Monday to Saturday and double time on Sundays and Bank Holidays. • The bulk of our work is based in London and the home counties however on occasion stretches to the North of England, Scottish Highlands and the south of England. • When and if required to work away additional subsistence will be paid £100 net of tax per night , Premier Inn accommodation & breakfast provided & paid in advance by the company. • Holiday starts at 20 days per annum but increasing by 1 day each year to a maximum of 25 days. • This role will report to Michael Gogarty, Service and Installation Engineering Manager
Jul 03, 2026
Full time
Overview A Fire & Security Service Engineer is responsible for the installation, maintenance, servicing, and repair of fire detection systems, intruder alarms, CCTV, access control, and other life-safety or security technologies. Small works (Installation) of the aforementioned systems are also included in this role. The role ensures systems remain compliant, reliable, and fully operational for commercial, industrial, and residential clients. Key Responsibilities • Service, maintain, and repair fire alarm systems, intruder alarms, CCTV, access control, and emergency lighting. • Carry out planned preventative maintenance (PPM) in line with industry standards and manufacturer guidelines. • Diagnose faults and implement effective solutions to restore system functionality. • Install and commission new fire and security systems when required. • Ensure compliance with relevant standards such as BS 5839, BS 5266, NSI, and FIA guidelines. • Complete accurate documentation, including service reports, certificates, and asset registers. • Provide technical support and advice to customers on system performance and upgrades. • Participate in on-call rota to provide emergency support outside normal working hours. • Maintain tools, equipment, and company vehicle to a high standard. • Adhere to health & safety procedures and site-specific requirements. Skills & Experience • Proven experience servicing fire alarm and/or security systems. • Strong understanding of industry standards and regulatory requirements. • Ability to read technical drawings and interpret system schematics. • Competent in fault-finding and problem-solving. • Good communication and customer-service skills. • Ability to work independently and manage workload effectively. • Full UK driving licence. Desirable Qualifications • FIA training units (e.g., Fundamentals, Design, Installation, Maintenance). • Electrical qualifications (e.g., NVQ Level 3, City & Guilds). • Experience with major brands such as Gent, Advanced, Kentec, Morley, Honeywell, Texecom, Hikvision, Paxton, etc. • Knowledge of networking for IP-based systems. • IPAF certification will be required Personal Attributes • Professional, reliable, and self-motivated. • Strong attention to detail. • Comfortable working in varied environments. • Positive attitude and willingness to learn new technologies. Training, phone, laptop, vehicle provision • Training is available for all disciplines. We would like to see any previous certification the candidate has achieved if available. The Following is provided Company vehicle - Van Petrol card Company pension scheme Laptop Mobile phone (PDA) ID Card Calibrated meter PPE equipment Uniform De Walt drill set provided Working hours , call out rota and subsistence • Normal working hours are Monday to Friday 8:30am to 5:30pm. • We have a call out rota in place. There is standby payment for each night the engineer is on call - £25.00 per day Monday to Friday, and £50.00 per day at weekends and £100.00 for bank holidays. • Out of hours call outs are paid from the time the engineer leaves home until they arrive back home. • Overtime is paid at time and a half Monday to Saturday and double time on Sundays and Bank Holidays. • The bulk of our work is based in London and the home counties however on occasion stretches to the North of England, Scottish Highlands and the south of England. • When and if required to work away additional subsistence will be paid £100 net of tax per night , Premier Inn accommodation & breakfast provided & paid in advance by the company. • Holiday starts at 20 days per annum but increasing by 1 day each year to a maximum of 25 days. • This role will report to Michael Gogarty, Service and Installation Engineering Manager
Solus Accident Repair Centres
Birchanger, Hertfordshire
Overview Hybrid with 2 days in our Stansted office. We are looking for an expert to lead the way in the innovation of the data analysis tools, automation and infrastructure within our Microsoft technology stack for our Award-Winning Accident Repair Network. Our mission is to develop the tools and technology that enable our teams to get our customers back to normal and we are often looking to cutting edge solutions to achieve this. The candidate will be reporting into our Platform Manager and working with our Systems Architect and Product Team to not only lead in the development of automation and Power Platform solutions for our business but also to support our bespoke award-winning IT system; as such this role is fundamental to our growth and success. Responsibilities As a Senior Azure Cloud Engineer, you will support and enable the Microsoft Technology Stack through IT Change, troubleshoot IT Problems, following ITIL v4 guidelines in this cutting edge and highly secure environment. You will support our technical environment, which includes Microsoft technologies, Meraki networking, SaaS solutions (including our own bespoke workshop management system) with much of the access managed by Single Sign-on (SSO). You will be passionate about technology and understand business systems and solutions. Work with the Systems Architect to design, implement, and maintain solutions within our Microsoft Technical Stack. Work with stakeholders to devise improvements to their teams' processes with Power Platforms and automation. Assist with IT Change and Problem Management following ITIL v4 guidelines, using advanced troubleshooting and problem-solving skills and working closely with internal colleagues and external suppliers in resolving issues promptly. Support IT governance, ensuring security best practises and disaster recovery plans are followed and raise concerns, risks and cyber incidents to the IT leadership team. Maintain detailed documentation for system configuration, procedures and troubleshooting and work with the Helpdesk team to remove blockers to resolve incidents and process service requests. Provide guidance and support to the wider IT team on infrastructure design and build and provide information regarding system/device performance and error logs. Must be able to commute to the Stansted office as this role is hybrid 2 days a week in the office. Be innovative in exploring new technologies that can help develop skills and competencies in the business and for individuals. What do I need to know? Cloud Platform Engineering Be able to design, implement and maintain Azure infrastructure across compute, storage, networking, and identity services. Be able to manage and maintain secure, scalable, and highly available cloud platforms aligned to the Azure Well-Architected Framework. Know how to implement and maintain Azure landing zones, subscriptions, and management groups. Security, Governance & Resilience Ensure platforms comply with security, compliance, and governance standards (e.g. RBAC, Key Vault, network security, logging). Apply best practices for cost control, monitoring, and operational resilience. Be able to support DR, backup, and business continuity designs across Azure workloads. Collaboration & Architecture Work closely with solution architect, product team, and security teams to align cloud solutions with business needs. Provide input into Technical Design Authority, Change Steering Groups, architecture reviews, and project delivery. Produce and maintain clear technical documentation. Qualifications Strong hands-on experience with Microsoft Azure, including: Azure Virtual Networks, VMs, Storage, Azure AD. PaaS services (App Services, Functions, Logic Apps, SQL, etc.). Monitoring and logging (Azure Monitor, Log Analytics). Scripting skills using PowerShell, Azure CLI, Bash, or Python. Good understanding of networking, security, and identity in cloud environments. Minimum three years' experience in a similar role. Experience of working within the ITIL v4 or 5 frameworks. Relevant Apprenticeship or higher education. Any of the following qualifications would be advantageous: Microsoft Azure Administrator Associate AZ-104 Microsoft Azure Developer Associate AZ-204 Microsoft Azure Network Engineer Associate AZ-700 Microsoft Azure Solutions Architect Expert AZ-305 Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Jul 03, 2026
Full time
Overview Hybrid with 2 days in our Stansted office. We are looking for an expert to lead the way in the innovation of the data analysis tools, automation and infrastructure within our Microsoft technology stack for our Award-Winning Accident Repair Network. Our mission is to develop the tools and technology that enable our teams to get our customers back to normal and we are often looking to cutting edge solutions to achieve this. The candidate will be reporting into our Platform Manager and working with our Systems Architect and Product Team to not only lead in the development of automation and Power Platform solutions for our business but also to support our bespoke award-winning IT system; as such this role is fundamental to our growth and success. Responsibilities As a Senior Azure Cloud Engineer, you will support and enable the Microsoft Technology Stack through IT Change, troubleshoot IT Problems, following ITIL v4 guidelines in this cutting edge and highly secure environment. You will support our technical environment, which includes Microsoft technologies, Meraki networking, SaaS solutions (including our own bespoke workshop management system) with much of the access managed by Single Sign-on (SSO). You will be passionate about technology and understand business systems and solutions. Work with the Systems Architect to design, implement, and maintain solutions within our Microsoft Technical Stack. Work with stakeholders to devise improvements to their teams' processes with Power Platforms and automation. Assist with IT Change and Problem Management following ITIL v4 guidelines, using advanced troubleshooting and problem-solving skills and working closely with internal colleagues and external suppliers in resolving issues promptly. Support IT governance, ensuring security best practises and disaster recovery plans are followed and raise concerns, risks and cyber incidents to the IT leadership team. Maintain detailed documentation for system configuration, procedures and troubleshooting and work with the Helpdesk team to remove blockers to resolve incidents and process service requests. Provide guidance and support to the wider IT team on infrastructure design and build and provide information regarding system/device performance and error logs. Must be able to commute to the Stansted office as this role is hybrid 2 days a week in the office. Be innovative in exploring new technologies that can help develop skills and competencies in the business and for individuals. What do I need to know? Cloud Platform Engineering Be able to design, implement and maintain Azure infrastructure across compute, storage, networking, and identity services. Be able to manage and maintain secure, scalable, and highly available cloud platforms aligned to the Azure Well-Architected Framework. Know how to implement and maintain Azure landing zones, subscriptions, and management groups. Security, Governance & Resilience Ensure platforms comply with security, compliance, and governance standards (e.g. RBAC, Key Vault, network security, logging). Apply best practices for cost control, monitoring, and operational resilience. Be able to support DR, backup, and business continuity designs across Azure workloads. Collaboration & Architecture Work closely with solution architect, product team, and security teams to align cloud solutions with business needs. Provide input into Technical Design Authority, Change Steering Groups, architecture reviews, and project delivery. Produce and maintain clear technical documentation. Qualifications Strong hands-on experience with Microsoft Azure, including: Azure Virtual Networks, VMs, Storage, Azure AD. PaaS services (App Services, Functions, Logic Apps, SQL, etc.). Monitoring and logging (Azure Monitor, Log Analytics). Scripting skills using PowerShell, Azure CLI, Bash, or Python. Good understanding of networking, security, and identity in cloud environments. Minimum three years' experience in a similar role. Experience of working within the ITIL v4 or 5 frameworks. Relevant Apprenticeship or higher education. Any of the following qualifications would be advantageous: Microsoft Azure Administrator Associate AZ-104 Microsoft Azure Developer Associate AZ-204 Microsoft Azure Network Engineer Associate AZ-700 Microsoft Azure Solutions Architect Expert AZ-305 Solus, who are owned by Aviva, are one of the UK leaders in vehicle repairs, returning cars to the road in just 11 days on average and a 4.6/5 star customer rating. With an award-winning apprenticeship programme and winners of other recognised industry awards Solus are proud to be shaping the future of vehicle repair. Why Join Solus? We have so much to offer when it comes to being a Solus colleague: Competitive salary based on location, skills, experience, and qualifications. Bonus opportunity tied to your performance and the overall success of Solus. Company pension scheme with employer contributions. 33 days' holiday (including bank holidays), with the option to buy or sell up to 5 days. Save money with up to 40% discount on Aviva products and other retailer discounts. Share in Aviva's success through the Aviva Save As You Earn scheme. Supportive policies including parental and carer's leave. Wellbeing focus with tools like Group Income Protection and 24/7 GP access. At Solus, we value inclusivity and welcome all applicants. If you're excited but don't tick every box, we encourage you to apply-your unique skills might be just what we need. We guarantee an interview for disabled applicants meeting the minimum criteria-just email us after applying to let us know. Ready to join us? Apply online today, and our team will be in touch within 14 days.
Safran R&T Deputy Chief Engineer Gloucester Safran Landing Systems are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end; OEM Design, Engineering & Manufacturing, through to Maintenance, Repair, and Overhaul (MRO). Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision Your Role The Deputy Chief Engineer is responsible for the planning, cost, quality and on time delivery of a diverse portfolio of projects for Safran Landing Systems. You will coordinate with different functions within Safran Landing Systems on behalf of the Chief Engineer (CE) for R&T Products, in order to achieve major milestones of that technology segment. You will be responsible for: Leading, Developing and Maturing new technologies across Landing Gear and Integration (LGI) (primarily), Wheel and Brakes (W&B), System and Equipment (SE) and Maintenance, Repair and Overhaul (MRO) divisions of Safran Landing System. Constructing and Delivering the TRL road map alongside the CE and Programs teams. Identify and validate requirements to mature technologies to Technology Readiness Level (TRL) 6; from coupon testing to full scale testing. Develop a partnership with technical experts and technical entities across Safran Work alongside the Safran Landing Systems Transverse teams, LGI, W&B, SE and MRO teams to ensure projects objectives are achieved. Develop a partnership with academia and industrial businesses. Report technical progress to Safran Landing Systems senior management and funding agencies. What you'll bring: Experience in Research environment Degree level or similar experience in an engineering discipline Project management and a proven record of accomplishment in previous projects Leadership skills Excellent People management skills - role will be supporting Chief Engineer to lead and manage a UK funded project, with a team (potentially matrix) of 5-6 Excellent communication and presentation skills Have an exceptional team work ethic At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation. Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today.
Jul 02, 2026
Full time
Safran R&T Deputy Chief Engineer Gloucester Safran Landing Systems are a global leader in aircraft landing and braking systems, from commercial and business travel to military and defence fleets. Our expertise cover the entire life cycle of our products from end-to-end; OEM Design, Engineering & Manufacturing, through to Maintenance, Repair, and Overhaul (MRO). Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: Early finish on Fridays Competitive salary and annual bonus and pay review 25 days' holiday + bank holidays (option to buy/sell) Strong Pension scheme and life assurance Professional development, ongoing training, mentoring Onsite amenities: parking, restaurant, bicycle storage, showers Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision Your Role The Deputy Chief Engineer is responsible for the planning, cost, quality and on time delivery of a diverse portfolio of projects for Safran Landing Systems. You will coordinate with different functions within Safran Landing Systems on behalf of the Chief Engineer (CE) for R&T Products, in order to achieve major milestones of that technology segment. You will be responsible for: Leading, Developing and Maturing new technologies across Landing Gear and Integration (LGI) (primarily), Wheel and Brakes (W&B), System and Equipment (SE) and Maintenance, Repair and Overhaul (MRO) divisions of Safran Landing System. Constructing and Delivering the TRL road map alongside the CE and Programs teams. Identify and validate requirements to mature technologies to Technology Readiness Level (TRL) 6; from coupon testing to full scale testing. Develop a partnership with technical experts and technical entities across Safran Work alongside the Safran Landing Systems Transverse teams, LGI, W&B, SE and MRO teams to ensure projects objectives are achieved. Develop a partnership with academia and industrial businesses. Report technical progress to Safran Landing Systems senior management and funding agencies. What you'll bring: Experience in Research environment Degree level or similar experience in an engineering discipline Project management and a proven record of accomplishment in previous projects Leadership skills Excellent People management skills - role will be supporting Chief Engineer to lead and manage a UK funded project, with a team (potentially matrix) of 5-6 Excellent communication and presentation skills Have an exceptional team work ethic At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation. Here, we craft excellence together. If you're ready to take your career to new heights and be part of a company that's crafting the future of flight, apply today.
Life Safety Systems Engineer Location: Home-based (Predominantly covering West London, Berks, Surrey, and Herts) Salary: £40,000 - £45,000 DOE & Skill Set (Typical OTE: £50,000 - £60,000+ PA) Job Type: Temporary to Permanent 3-month temporary period. Benefits: Company Vehicle (Estate Car or Van), Fuel/Travel fully covered, Private Healthcare, Performance Bonuses, and more. About Us This company is a life safety systems provider delivering top-tier engineering works to a wide selection of blue-chip and public sector organisations. They pride themselves on a proven track record of developing staff, rewarding hard work, and fostering long-term career progression. Due to increasing customer demand, we are looking for a highly motivated, career-minded Life Safety Systems Engineer to join their field team. What they offer Earning Potential: Regular overtime, weekend opportunities, and a performance-related bonus scheme. Travel & Equipment: Home-based role with an Estate Car or Van, fuel, uniform, mobile phone, laptop, PPE, and test equipment provided. All travel, hotel, and subsistence costs for occasional extended travel are fully met by the company. Time Off: Loyalty holiday scheme and an annual Christmas Shutdown. Health & Wellbeing: Company-subsidised Private Healthcare Scheme alongside personal wellbeing and mental health support. Financial Security: Contributory Pension Option (via Salary Sacrifice) and a paid Call Out Rota retainer. Key Responsibilities System Engineering: Deliver high-quality maintenance, fault finding (including cable faults), repairs, small modifications, and additions to various life safety systems. Emergency Support: Participate in the Company Emergency Support Rota (currently 1 week in 7) to provide critical field repair works. Compliance & Reporting: Accurately complete electronic reporting in accordance with company procedures and British Standard Statutory requirements. Professionalism: Represent the company appropriately at all times, maintaining excellent communication given the high profile of our clients. Continuous Improvement: Actively participate in ongoing theoretical, practical, and external industry-regulated training to continuously build your skill set. Role Structure & Onboarding This position is based from home and begins with a 12-week probationary period . This includes "on-the-job" foundation training alongside existing field managers and senior engineers. This period allows you to demonstrate your technical expertise while adapting to company processes. Upon successful completion of a brief written assessment and review, you will transition to fully unsupervised solo works, unlocking full eligibility for our performance bonuses and emergency support rota payments. Position Requirements Minimum Requirements (Must-Haves): Experience: At least 3 years of hands-on experience maintaining, fault-finding, modifying, extending, and commissioning a wide variety of life safety system types. Qualifications: City & Guilds 231 Electrical Parts 1 & 2, IEEE 17th/18th Edition, or an ONC in Electrical/Electronic Engineering (or equivalent). Industry Training: FIA and/or IFEDA competency course passes in Fire Alarm Design, Maintenance, Installation & Commissioning (or equivalent). Driving Licence: Full, valid UK driving licence with a maximum of 3 penalty points. Skills: Strong working knowledge of MS Office (Word, Excel, Outlook) and fluency in English. Education: Level 5 or above equivalent in Maths, English, and a technical subject. Strong understanding of statutory requirements for fire alarms, emergency lighting, voice alarms, and fire extinguishers. To be considered for this role please either hit the 'Apply' button on this site or email your CV directly to (url removed) ATA Recruitment specialise in Technical and Electrical Engineering, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - (url removed) ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Jul 02, 2026
Full time
Life Safety Systems Engineer Location: Home-based (Predominantly covering West London, Berks, Surrey, and Herts) Salary: £40,000 - £45,000 DOE & Skill Set (Typical OTE: £50,000 - £60,000+ PA) Job Type: Temporary to Permanent 3-month temporary period. Benefits: Company Vehicle (Estate Car or Van), Fuel/Travel fully covered, Private Healthcare, Performance Bonuses, and more. About Us This company is a life safety systems provider delivering top-tier engineering works to a wide selection of blue-chip and public sector organisations. They pride themselves on a proven track record of developing staff, rewarding hard work, and fostering long-term career progression. Due to increasing customer demand, we are looking for a highly motivated, career-minded Life Safety Systems Engineer to join their field team. What they offer Earning Potential: Regular overtime, weekend opportunities, and a performance-related bonus scheme. Travel & Equipment: Home-based role with an Estate Car or Van, fuel, uniform, mobile phone, laptop, PPE, and test equipment provided. All travel, hotel, and subsistence costs for occasional extended travel are fully met by the company. Time Off: Loyalty holiday scheme and an annual Christmas Shutdown. Health & Wellbeing: Company-subsidised Private Healthcare Scheme alongside personal wellbeing and mental health support. Financial Security: Contributory Pension Option (via Salary Sacrifice) and a paid Call Out Rota retainer. Key Responsibilities System Engineering: Deliver high-quality maintenance, fault finding (including cable faults), repairs, small modifications, and additions to various life safety systems. Emergency Support: Participate in the Company Emergency Support Rota (currently 1 week in 7) to provide critical field repair works. Compliance & Reporting: Accurately complete electronic reporting in accordance with company procedures and British Standard Statutory requirements. Professionalism: Represent the company appropriately at all times, maintaining excellent communication given the high profile of our clients. Continuous Improvement: Actively participate in ongoing theoretical, practical, and external industry-regulated training to continuously build your skill set. Role Structure & Onboarding This position is based from home and begins with a 12-week probationary period . This includes "on-the-job" foundation training alongside existing field managers and senior engineers. This period allows you to demonstrate your technical expertise while adapting to company processes. Upon successful completion of a brief written assessment and review, you will transition to fully unsupervised solo works, unlocking full eligibility for our performance bonuses and emergency support rota payments. Position Requirements Minimum Requirements (Must-Haves): Experience: At least 3 years of hands-on experience maintaining, fault-finding, modifying, extending, and commissioning a wide variety of life safety system types. Qualifications: City & Guilds 231 Electrical Parts 1 & 2, IEEE 17th/18th Edition, or an ONC in Electrical/Electronic Engineering (or equivalent). Industry Training: FIA and/or IFEDA competency course passes in Fire Alarm Design, Maintenance, Installation & Commissioning (or equivalent). Driving Licence: Full, valid UK driving licence with a maximum of 3 penalty points. Skills: Strong working knowledge of MS Office (Word, Excel, Outlook) and fluency in English. Education: Level 5 or above equivalent in Maths, English, and a technical subject. Strong understanding of statutory requirements for fire alarms, emergency lighting, voice alarms, and fire extinguishers. To be considered for this role please either hit the 'Apply' button on this site or email your CV directly to (url removed) ATA Recruitment specialise in Technical and Electrical Engineering, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - (url removed) ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Bennett & Game are pleased to be representing a well-established and employee-owned civil and structural engineering consultancy based in Cardiff. With over 30 years of industry presence, they are now seeking a Senior / Principal Structural Engineer to join their growing team due to continued project success and a strong pipeline of work. This is an excellent opportunity for an experienced Structural Engineer who is either Chartered, or approaching Chartership, to join a respected consultancy offering genuine career progression, project ownership and long-term stability within an employee-owned business. The successful candidate will be involved in the design and delivery of a wide range of structural engineering projects across the residential, commercial, education, healthcare, leisure, industrial and restoration sectors. The role would suit someone confident in technical design, client liaison and project delivery who is looking to step into a more senior position within a supportive consultancy environment. Senior / Principal Structural Engineer Job Overview Deliver structural design solutions across a variety of building projects, including new build, refurbishment, conversion and restoration schemes Work on structural alterations, repair and strengthening projects across multiple sectors Produce and review calculations, drawings, specifications and technical reports Lead projects from concept through to completion, ensuring technical quality and commercial delivery Liaise with clients, architects, contractors and wider design teams Support junior engineers and technicians with technical guidance and project delivery Attend site visits, design meetings and client meetings where required Contribute to the continued growth and development of the structural engineering team Senior / Principal Structural Engineer Job Requirements Degree qualified in Structural Engineering, Civil Engineering or a related discipline Chartered or working towards Chartership with IStructE or ICE Strong experience within a UK structural engineering consultancy environment Experience delivering building structures projects across a range of sectors Confident working with steel, concrete, masonry and timber structures Ability to manage projects, liaise with clients and coordinate with external design teams Strong technical design ability and commercial awareness Experience mentoring or supporting junior members of staff would be advantageous Full UK driving licence desirable Senior / Principal Structural Engineer Salary & Benefits Circa to 60,000 Employee-owned business structure Private healthcare Genuine progression to senior leadership level Support towards Chartership, where required Opportunity to work on a varied and high-quality project portfolio Professional and collaborative working environment Long-term career stability within a growing consultancy Pension scheme Holiday: 25 days per year Additional company benefits to be discussed at interview Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Jul 01, 2026
Full time
Bennett & Game are pleased to be representing a well-established and employee-owned civil and structural engineering consultancy based in Cardiff. With over 30 years of industry presence, they are now seeking a Senior / Principal Structural Engineer to join their growing team due to continued project success and a strong pipeline of work. This is an excellent opportunity for an experienced Structural Engineer who is either Chartered, or approaching Chartership, to join a respected consultancy offering genuine career progression, project ownership and long-term stability within an employee-owned business. The successful candidate will be involved in the design and delivery of a wide range of structural engineering projects across the residential, commercial, education, healthcare, leisure, industrial and restoration sectors. The role would suit someone confident in technical design, client liaison and project delivery who is looking to step into a more senior position within a supportive consultancy environment. Senior / Principal Structural Engineer Job Overview Deliver structural design solutions across a variety of building projects, including new build, refurbishment, conversion and restoration schemes Work on structural alterations, repair and strengthening projects across multiple sectors Produce and review calculations, drawings, specifications and technical reports Lead projects from concept through to completion, ensuring technical quality and commercial delivery Liaise with clients, architects, contractors and wider design teams Support junior engineers and technicians with technical guidance and project delivery Attend site visits, design meetings and client meetings where required Contribute to the continued growth and development of the structural engineering team Senior / Principal Structural Engineer Job Requirements Degree qualified in Structural Engineering, Civil Engineering or a related discipline Chartered or working towards Chartership with IStructE or ICE Strong experience within a UK structural engineering consultancy environment Experience delivering building structures projects across a range of sectors Confident working with steel, concrete, masonry and timber structures Ability to manage projects, liaise with clients and coordinate with external design teams Strong technical design ability and commercial awareness Experience mentoring or supporting junior members of staff would be advantageous Full UK driving licence desirable Senior / Principal Structural Engineer Salary & Benefits Circa to 60,000 Employee-owned business structure Private healthcare Genuine progression to senior leadership level Support towards Chartership, where required Opportunity to work on a varied and high-quality project portfolio Professional and collaborative working environment Long-term career stability within a growing consultancy Pension scheme Holiday: 25 days per year Additional company benefits to be discussed at interview Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
My client is a small Civil Engineering Design Consultancy based in the centre of Bournemouth. They are seeking to expand through organic growth and are looking to employ a Senior Civil Engineer. They provide excellent training opportunities (approved ICE Training Scheme) and a negotiable package dependant on candidate level of experience and ability. The successful candidate will have hands on experience of the design process associated with drainage design for commercial and residential developments and will have a full UK driving licence. Experience in the preparation of Flood Risk Assessments, structural engineering, roads and car parks and other aspects of general civil engineering design would be beneficial. The company has a mixed workload and can offer autonomy, variety and the opportunity to run your own projects, liaise directly with clients, whilst playing a strategic part in ongoing growth plans. The role offers excellent career prospects. Main Responsibilities and Duties - Responsible for undertaking supervised design input on a wide variety of civil engineering and building project - Undertaking site visits to investigate existing systems to aid evaluation of potential solutions - Predominately office based design using CAD for water related projects - Attending site during construction where your designs have been implemented - Surveying drainage systems to inform design and CCTV requirements - Designing SUDS (soakaways, swales and balancing / attenuation ponds) - Hydraulic modelling of surface water drainage networks along with online or offline storage solutions - Engineering appraisals of developable land - Preparation of proposals for the maintenance and repair of drainage infrastructure such both surface water and wastewater - Preparation of cost estimates and project timescales for capital works - Contract Management including Contract preparation and administration - Assisting the project manager on various aspects of projects - Liaise with clients, other professional teams and disciplines on relevant aspects of projects - Delegating and supervising work of more junior team members - Undertaking own self development and promoting CPD activities. - Support the Office Director in managing the team's workload Essential Requirements - Relevant Civil Engineering Qualification, HNC/BTEC or above BSc / MEng - Proficient in Microsoft Office - Demonstratable experience of AutoCAD 2D - Experience in site surveying and setting out - Experience in the design process associated with drainage and roads for commercial and residential developments - Self-motivated, enthusiastic team player, able to work on own initiative - Excellent communication skills and attention to detail Desirable Requirements - Ideally Chartered or working towards Professional Membership of ICE, EngTech, IEng or MICE - Sector related design software such as WinDes, Tuflow, HEC-RAS and FEH - Other industry standard design related software such as TEDDS, S-Frame and CADSRC - Experience in infrastructure design; drainage; roads and streets, utilities etc - Experience in preparing Flood Risk Assessments - A working knowledge of Drainage Design both private and adoptable to Sewers for Adoption 7th Edition and Section 104, 106 and 185 agreements - A working knowledge of highway design, Section 38 and 278 agreements - Experience in private road and car park design - Basic structural engineering experience in low rise properties, retaining walls and sea defences - Experience in attending project meetings and in running small projects - Have awareness of construction contracts and ideally specification preparation
Jul 01, 2026
Full time
My client is a small Civil Engineering Design Consultancy based in the centre of Bournemouth. They are seeking to expand through organic growth and are looking to employ a Senior Civil Engineer. They provide excellent training opportunities (approved ICE Training Scheme) and a negotiable package dependant on candidate level of experience and ability. The successful candidate will have hands on experience of the design process associated with drainage design for commercial and residential developments and will have a full UK driving licence. Experience in the preparation of Flood Risk Assessments, structural engineering, roads and car parks and other aspects of general civil engineering design would be beneficial. The company has a mixed workload and can offer autonomy, variety and the opportunity to run your own projects, liaise directly with clients, whilst playing a strategic part in ongoing growth plans. The role offers excellent career prospects. Main Responsibilities and Duties - Responsible for undertaking supervised design input on a wide variety of civil engineering and building project - Undertaking site visits to investigate existing systems to aid evaluation of potential solutions - Predominately office based design using CAD for water related projects - Attending site during construction where your designs have been implemented - Surveying drainage systems to inform design and CCTV requirements - Designing SUDS (soakaways, swales and balancing / attenuation ponds) - Hydraulic modelling of surface water drainage networks along with online or offline storage solutions - Engineering appraisals of developable land - Preparation of proposals for the maintenance and repair of drainage infrastructure such both surface water and wastewater - Preparation of cost estimates and project timescales for capital works - Contract Management including Contract preparation and administration - Assisting the project manager on various aspects of projects - Liaise with clients, other professional teams and disciplines on relevant aspects of projects - Delegating and supervising work of more junior team members - Undertaking own self development and promoting CPD activities. - Support the Office Director in managing the team's workload Essential Requirements - Relevant Civil Engineering Qualification, HNC/BTEC or above BSc / MEng - Proficient in Microsoft Office - Demonstratable experience of AutoCAD 2D - Experience in site surveying and setting out - Experience in the design process associated with drainage and roads for commercial and residential developments - Self-motivated, enthusiastic team player, able to work on own initiative - Excellent communication skills and attention to detail Desirable Requirements - Ideally Chartered or working towards Professional Membership of ICE, EngTech, IEng or MICE - Sector related design software such as WinDes, Tuflow, HEC-RAS and FEH - Other industry standard design related software such as TEDDS, S-Frame and CADSRC - Experience in infrastructure design; drainage; roads and streets, utilities etc - Experience in preparing Flood Risk Assessments - A working knowledge of Drainage Design both private and adoptable to Sewers for Adoption 7th Edition and Section 104, 106 and 185 agreements - A working knowledge of highway design, Section 38 and 278 agreements - Experience in private road and car park design - Basic structural engineering experience in low rise properties, retaining walls and sea defences - Experience in attending project meetings and in running small projects - Have awareness of construction contracts and ideally specification preparation
Structural Engineer Job in London Structural Engineer role in London for a reputable multidisciplinary consultancy. Our client is looking for someone to deliver high-quality structural engineering solutions across a range of projects including conducting assessments, preparing designs and reports. Our client has strong client relationships spanning the residential, education, commercial and healthcare sectors, focusing on excellent service delivery across a wide remit of disciplines including Building Surveying, Architecture, Quantity Surveying, Fire Engineering, Structural Engineering, Project Management and Site Inspection. Predominantly their client base sits within the M25 but they also have clients on the outskirts of London. They have seen considerable growth, creating opportunities for both new and existing team members to advance their careers and develop personally within a forward-thinking and evolving business that's focused on long-term success. Role & Responsibilities You will focus on remediation, refurbishment, strengthening, and upgrades of existing buildings, rather than new-builds Work closely with architects, surveyors, and clients to deliver safe, efficient, and sustainable solutions Carry out feasibility studies, structural assessments, and defect analysis on medium- and high-rise buildings Lead investigations, identify structural issues, and propose cost-effective repair or strengthening solutions carry out site inspections and monitor progress to ensure compliance with design and safety standards Prepare clear technical reports and provide expert advice to clients. Required Skills & Experience 5 years of post-qualification experience, with a focus on existing buildings, remediation, and refurbishment Degree in Civil or Structural Engineering, Chartered (IStructE/ICE) or working towards Chartership Experience in structural re-modelling, strengthening, and refurbishment of medium- and high-rise buildings Proficiency in structural design software, Microsoft Office, Tekla and TEDDS Experience diagnosing building defects, identifying causes, and designing appropriate remedial solutions Strong knowledge of UK building regulations, British Standards, Eurocodes, CDM Regulations and BSA. What you get back Salary of up to 65,000 26 days Holiday + Bank Holidays Flexible work options Private healthcare. Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they've successfully completed the probation period. Structural Engineer Job in London - Your Property Recruitment Specialists (Recruiter: Oliver Charlton Job Ref: 15297)
Jul 01, 2026
Full time
Structural Engineer Job in London Structural Engineer role in London for a reputable multidisciplinary consultancy. Our client is looking for someone to deliver high-quality structural engineering solutions across a range of projects including conducting assessments, preparing designs and reports. Our client has strong client relationships spanning the residential, education, commercial and healthcare sectors, focusing on excellent service delivery across a wide remit of disciplines including Building Surveying, Architecture, Quantity Surveying, Fire Engineering, Structural Engineering, Project Management and Site Inspection. Predominantly their client base sits within the M25 but they also have clients on the outskirts of London. They have seen considerable growth, creating opportunities for both new and existing team members to advance their careers and develop personally within a forward-thinking and evolving business that's focused on long-term success. Role & Responsibilities You will focus on remediation, refurbishment, strengthening, and upgrades of existing buildings, rather than new-builds Work closely with architects, surveyors, and clients to deliver safe, efficient, and sustainable solutions Carry out feasibility studies, structural assessments, and defect analysis on medium- and high-rise buildings Lead investigations, identify structural issues, and propose cost-effective repair or strengthening solutions carry out site inspections and monitor progress to ensure compliance with design and safety standards Prepare clear technical reports and provide expert advice to clients. Required Skills & Experience 5 years of post-qualification experience, with a focus on existing buildings, remediation, and refurbishment Degree in Civil or Structural Engineering, Chartered (IStructE/ICE) or working towards Chartership Experience in structural re-modelling, strengthening, and refurbishment of medium- and high-rise buildings Proficiency in structural design software, Microsoft Office, Tekla and TEDDS Experience diagnosing building defects, identifying causes, and designing appropriate remedial solutions Strong knowledge of UK building regulations, British Standards, Eurocodes, CDM Regulations and BSA. What you get back Salary of up to 65,000 26 days Holiday + Bank Holidays Flexible work options Private healthcare. Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they've successfully completed the probation period. Structural Engineer Job in London - Your Property Recruitment Specialists (Recruiter: Oliver Charlton Job Ref: 15297)
Senior Building Surveyor job available, joining a reputable and growing multidisciplinary consultancy in Central London. This role offers the opportunity to work across a strong pipeline of residential and commercial defect and remediation projects, delivering high-quality professional services as part of a dynamic and collaborative team. Offering a salary of up to 72,000 (flexible) plus hybrid working, 26 days holiday, private healthcare, and ongoing progression opportunities. Established over 50 years ago, they are a team of 170 with plans to grow to 250 in the next few years, they operate from 15 offices across the UK and have a Building Surveying team of 65. Offering services across building surveying, commercial property consultancy, civil & structural engineering, cost consultancy, architecture & planning and insurance works. Role & Responsibilities Inspect and provide advice on the design, construction, maintenance, repair, and refurbishment of all types of buildings and sites Acquisition surveys, condition reports, measured surveys and defect investigations Prepare reports and schedules of works Design and oversee works using recognised building contracts and to current technical standards Comply with current regulations with regard to health and safety, party wall, building regulations and planning Support RICS APC candidates if chartered. Required Skills & Experience MRICS or close to achieving is essential Experienced in delivery of both project management and professional services Experienced in defect diagnosis and report writing Insurance repair project experience would be an advantage Experienced in managing multiple projects Understanding of CDM Regulations, Party Wall and the latest building regulations. What you get back Salary Up to 72,000 if Chartered (Up to 70,000 if not yet chartered) Ideally 6+ years' experience post-graduation Up to 10% discretionary bonus 26 days holiday + Bank Holidays + option to buy 5 additional days Hybrid Working 5% matched pension contribution Health Cover 5k Core Critical Illness Life Assurance 3 x Salary Annual corporate social responsibility days. Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they've successfully completed the probation period. See website for full terms & conditions. Senior Building Surveyor Job in Central London - Your Property Recruitment Specialists (Job Ref: (phone number removed
Jun 30, 2026
Full time
Senior Building Surveyor job available, joining a reputable and growing multidisciplinary consultancy in Central London. This role offers the opportunity to work across a strong pipeline of residential and commercial defect and remediation projects, delivering high-quality professional services as part of a dynamic and collaborative team. Offering a salary of up to 72,000 (flexible) plus hybrid working, 26 days holiday, private healthcare, and ongoing progression opportunities. Established over 50 years ago, they are a team of 170 with plans to grow to 250 in the next few years, they operate from 15 offices across the UK and have a Building Surveying team of 65. Offering services across building surveying, commercial property consultancy, civil & structural engineering, cost consultancy, architecture & planning and insurance works. Role & Responsibilities Inspect and provide advice on the design, construction, maintenance, repair, and refurbishment of all types of buildings and sites Acquisition surveys, condition reports, measured surveys and defect investigations Prepare reports and schedules of works Design and oversee works using recognised building contracts and to current technical standards Comply with current regulations with regard to health and safety, party wall, building regulations and planning Support RICS APC candidates if chartered. Required Skills & Experience MRICS or close to achieving is essential Experienced in delivery of both project management and professional services Experienced in defect diagnosis and report writing Insurance repair project experience would be an advantage Experienced in managing multiple projects Understanding of CDM Regulations, Party Wall and the latest building regulations. What you get back Salary Up to 72,000 if Chartered (Up to 70,000 if not yet chartered) Ideally 6+ years' experience post-graduation Up to 10% discretionary bonus 26 days holiday + Bank Holidays + option to buy 5 additional days Hybrid Working 5% matched pension contribution Health Cover 5k Core Critical Illness Life Assurance 3 x Salary Annual corporate social responsibility days. Apply If you meet the criteria above, send us your CV and portfolio. We receive a large number of applications so if you do not hear back within 7 days consider your application unsuccessful this time. We will keep a copy of your details on file for future vacancies. In accordance with GDPR, by applying for this position you give us your consent to process your data in-line with our Privacy and Data Protection Policies which can be read on the privacy policy page on our website. Referral Did you know we run a referral scheme? We pay a 1000 referral bonus if you introduce us to anyone who we then successfully place in a new job role. Just send us their information and we'll do the rest. Terms: A candidate is deemed to have been successfully placed once they have started a new job as a result of an introduction made by Hunter Dunning and when they've successfully completed the probation period. See website for full terms & conditions. Senior Building Surveyor Job in Central London - Your Property Recruitment Specialists (Job Ref: (phone number removed
MB980: Lift Engineer Location: South London Salary: £40,000 - £45,000 + Company Vehicle + Performance Bonus Working Hours: Monday to Friday 08:30 to 16:30 Additional Company Benefits: 23 days annual leave plus BH, Company vehicle (including personal use), Fuel card, Performance related bonus, Pension, Cycle to work scheme, Gym Discounts, Tech scheme, Retail discounts, Comprehensive EAP service, 24 hour GP service Overview: First Military Recruitment is proudly working in partnership with a fantastic Engineering and Construction business who are looking to recruit a Lift Engineer on a permanent basis due to growth located in the South London area. Duties and Responsibilities: To carry out statutory LOLER inspections on a variety of lifting equipment. Inspections to be carried out thoroughly and to an excellent standard. Attending sites, examining a wide variety of lifting equipment and issuing reports to clients. Surveying existing plants to provide a report upon the incumbent service provider's service delivery, compliance with current Health & Safety Legislation, Disability Discrimination Act compliance and short/medium/long term comments in respect to lift cycle analysis of the plant. Provide an overview report of possible options for either refurbishment of existing installation of possible replacement with a new pre-engineered modular design solution. Carry out visual surveys of existing installations to 'benchmark' the installation against our in-house predetermined 'quality' expectations and produce reports. Providing professional advice on the incumbent service provider as to their overall performance and service delivery and produce reports. Travelling independently to attend customer sites/premises as required. Maintaining an up-to-date knowledge of products and full range of accessories. Completing test certificates and associated paperwork in a timely and accurate manner. Abide by Health & Safety regulations at all times. To work in a manner that is methodical, efficient, considerate and respectful to clients at all times and providing excellent customer service. Carry out other reasonable duties as deemed necessary by the Senior Associate. Qualifications and experience: Qualified (or equivalent experience) to at least NVQ 3 - Lift Engineering. Proven experience of carrying out service/maintenance lift inspections. Experience of independently diagnosing / repairing a variety of lifts. Experience working autonomously in a customer facing role. Good written and spoken English. Excellent understanding of current Health & Safety procedures and standards applicable to the job role. Full UK Driving license. MB980: Lift Engineer Location: South London Salary: £40,000 - £45,000 + Company Vehicle + Performance Bonus Working Hours: Monday to Friday 08:30 to 16:30 Additional Company Benefits: 23 days annual leave plus BH, Company vehicle (including personal use), Fuel card, Performance related bonus, Pension, Cycle to work scheme, Gym Discounts, Tech scheme, Retail discounts, Comprehensive EAP service, 24 hour GP service
Jun 30, 2026
Full time
MB980: Lift Engineer Location: South London Salary: £40,000 - £45,000 + Company Vehicle + Performance Bonus Working Hours: Monday to Friday 08:30 to 16:30 Additional Company Benefits: 23 days annual leave plus BH, Company vehicle (including personal use), Fuel card, Performance related bonus, Pension, Cycle to work scheme, Gym Discounts, Tech scheme, Retail discounts, Comprehensive EAP service, 24 hour GP service Overview: First Military Recruitment is proudly working in partnership with a fantastic Engineering and Construction business who are looking to recruit a Lift Engineer on a permanent basis due to growth located in the South London area. Duties and Responsibilities: To carry out statutory LOLER inspections on a variety of lifting equipment. Inspections to be carried out thoroughly and to an excellent standard. Attending sites, examining a wide variety of lifting equipment and issuing reports to clients. Surveying existing plants to provide a report upon the incumbent service provider's service delivery, compliance with current Health & Safety Legislation, Disability Discrimination Act compliance and short/medium/long term comments in respect to lift cycle analysis of the plant. Provide an overview report of possible options for either refurbishment of existing installation of possible replacement with a new pre-engineered modular design solution. Carry out visual surveys of existing installations to 'benchmark' the installation against our in-house predetermined 'quality' expectations and produce reports. Providing professional advice on the incumbent service provider as to their overall performance and service delivery and produce reports. Travelling independently to attend customer sites/premises as required. Maintaining an up-to-date knowledge of products and full range of accessories. Completing test certificates and associated paperwork in a timely and accurate manner. Abide by Health & Safety regulations at all times. To work in a manner that is methodical, efficient, considerate and respectful to clients at all times and providing excellent customer service. Carry out other reasonable duties as deemed necessary by the Senior Associate. Qualifications and experience: Qualified (or equivalent experience) to at least NVQ 3 - Lift Engineering. Proven experience of carrying out service/maintenance lift inspections. Experience of independently diagnosing / repairing a variety of lifts. Experience working autonomously in a customer facing role. Good written and spoken English. Excellent understanding of current Health & Safety procedures and standards applicable to the job role. Full UK Driving license. MB980: Lift Engineer Location: South London Salary: £40,000 - £45,000 + Company Vehicle + Performance Bonus Working Hours: Monday to Friday 08:30 to 16:30 Additional Company Benefits: 23 days annual leave plus BH, Company vehicle (including personal use), Fuel card, Performance related bonus, Pension, Cycle to work scheme, Gym Discounts, Tech scheme, Retail discounts, Comprehensive EAP service, 24 hour GP service
Installation Engineer - Garage Doors Leicester 30,000 - 35,000 + Overtime + Van + Training + Benefits Are you from a Garage Door Installation or similar background and want a role offering a regional patch, more family time, job security and the chance to work for the manufacturer themselves? The company manage a national operation where they design, manufacture, install and service Garage Doors to households across the UK. They have an excellent reputation built on years of satisfied customers, great reviews and quality work. The role involves installing garage doors at homes around Leicestershire and across to Birmingham. You will be in two person teams with a junior engineer supporting you. You will typically work two installations per day and once done, you're home for the evening. If you want a job you can master, where you know what you have to do in advance, work for a well organised market leader and have a work life balance then this is fantastic. The Role: Installing Garage Doors at homes Monday to Friday - 2 jobs per day Mostly Installation with occasional repair jobs Covering Leicestershire, Northamptonshire, West Midlands areas Candidate Requirements: Some experience of installing garage doors or similar home or commercial type installations Own Tools Full Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.
Jun 30, 2026
Full time
Installation Engineer - Garage Doors Leicester 30,000 - 35,000 + Overtime + Van + Training + Benefits Are you from a Garage Door Installation or similar background and want a role offering a regional patch, more family time, job security and the chance to work for the manufacturer themselves? The company manage a national operation where they design, manufacture, install and service Garage Doors to households across the UK. They have an excellent reputation built on years of satisfied customers, great reviews and quality work. The role involves installing garage doors at homes around Leicestershire and across to Birmingham. You will be in two person teams with a junior engineer supporting you. You will typically work two installations per day and once done, you're home for the evening. If you want a job you can master, where you know what you have to do in advance, work for a well organised market leader and have a work life balance then this is fantastic. The Role: Installing Garage Doors at homes Monday to Friday - 2 jobs per day Mostly Installation with occasional repair jobs Covering Leicestershire, Northamptonshire, West Midlands areas Candidate Requirements: Some experience of installing garage doors or similar home or commercial type installations Own Tools Full Driving License Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.
Full time - 40 hours per week, based at Flitwick site. Focused on recyclable and compostable products, we design and manufacture award-winning, sustainable food packaging solutions exported worldwide. Our creativity and innovation takes inspiration from our markets around the globe. As our Engineer, you will: Provide fast and efficient installation, diagnostics, repairs and preventive maintenance to all the machinery, plant and equipment within the factory, keeping the Senior Works Engineer fully informed and up-to-date; Carry out basic electrical fault diagnosis and repairs; Work with the Senior Works Engineer to facilitate large or major repairs to plant and equipment; Assist in the development and implementation of a planned maintenance programme in consultation with the Senior Works Engineer; Demonstrate the effectiveness of planned maintenance through reducing numbers of breakdowns and problem-free equipment installations; Purchase sundries, machine parts and services, in liaison with the Senior Works Engineer, with due regard for stock levels and overall budget; Arrange, assist and direct external contractors for specialist work or installations in consultation with the Senior Works Engineer and Operations Director; Participate in the technical aspects of capital investment decisions; Advise senior management on Health and Safety issues or concerns. If you have the following skills and attributes, then we want to hear from you. Recent, relevant and proven experience as a maintenance engineer or similar role. Higher level qualification in engineering or manufacturing. Solid understanding of pneumatics, hydraulics, and mechanics. Familiarity using various power and hand tools. Ability to stand for long hours and lift heavy loads. Problem-solving and organisational skills - a self-starter who is well organised, positive, flexible and highly motivated to get the job done efficiently and safely using own initiative, and as part of a team, with a flexible approach to working hours and ability to work some overtime. Confident in communicating verbally and in writing in English.
Jun 30, 2026
Full time
Full time - 40 hours per week, based at Flitwick site. Focused on recyclable and compostable products, we design and manufacture award-winning, sustainable food packaging solutions exported worldwide. Our creativity and innovation takes inspiration from our markets around the globe. As our Engineer, you will: Provide fast and efficient installation, diagnostics, repairs and preventive maintenance to all the machinery, plant and equipment within the factory, keeping the Senior Works Engineer fully informed and up-to-date; Carry out basic electrical fault diagnosis and repairs; Work with the Senior Works Engineer to facilitate large or major repairs to plant and equipment; Assist in the development and implementation of a planned maintenance programme in consultation with the Senior Works Engineer; Demonstrate the effectiveness of planned maintenance through reducing numbers of breakdowns and problem-free equipment installations; Purchase sundries, machine parts and services, in liaison with the Senior Works Engineer, with due regard for stock levels and overall budget; Arrange, assist and direct external contractors for specialist work or installations in consultation with the Senior Works Engineer and Operations Director; Participate in the technical aspects of capital investment decisions; Advise senior management on Health and Safety issues or concerns. If you have the following skills and attributes, then we want to hear from you. Recent, relevant and proven experience as a maintenance engineer or similar role. Higher level qualification in engineering or manufacturing. Solid understanding of pneumatics, hydraulics, and mechanics. Familiarity using various power and hand tools. Ability to stand for long hours and lift heavy loads. Problem-solving and organisational skills - a self-starter who is well organised, positive, flexible and highly motivated to get the job done efficiently and safely using own initiative, and as part of a team, with a flexible approach to working hours and ability to work some overtime. Confident in communicating verbally and in writing in English.
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with more than 110,000 employees and revenue of 31.3 billion euros in 2025, and holds, alone or in partnership, global or regional leadership positions in its core markets. Safran undertakes research and development programs to maintain the environmental priorities of its R&T and Innovation roadmaps. What does the role look like? We're seeking a strategic and inspiring Divisional Human Resources Director to lead the people agenda across our Landing Systems Gloucester sites, supporting both Original Equipment Manufacturer (OEM) and Maintenance, Repair & Overhaul (MRO) businesses. This is a pivotal leadership role operating within two distinct business models, each with challenges and significant growth opportunities. The successful candidate will play a key role in shaping the organisation's future-driving transformation, building organisational capability, and enabling sustainable performance through people. The successful candidate will have demonstrable experience of working in regulated P&L driven environments, covering a range of HR functions alongside being a proven leader who has a high degree of emotional intelligence. What will your day-to-day responsibilities look like? Deliver and develop the people strategy aligned with business objectives. Lead organisational development, design and workforce planning. Promote collaboration and engagement across functions, divisions and Safran businesses. Operate and lead across dual operating models. Translate business challenges into impactful and timely HR solutions. Use people analytics to inform decisions. Strengthen leadership and management capability. Embed and deepen talent development approaches. Lead a high-performing HR team. Strengthen HR's strategic and operational impact. Build trusted senior relationships across SLS and Safran Maintain strong Trade Union engagement and dialogue. Ensure compliance and promote inclusion. What will you bring to the role? Essential skills: Significant demonstratable HR leadership experience across regulated or P&L driven business' Experience across differing business models (preferably to include Engineering &/or Manufacturing) Proven background in transformation and talent strategy. Desirable skills: Proven ability to engage & drive high performing teams Ability to be strategic and able to demonstrate commercial awareness when making decisions Excellent influencing skills at all levels Adaptable and resilient Commitment to integrity, collaboration and transparency Experience in unionised environments
Jun 29, 2026
Full time
Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with more than 110,000 employees and revenue of 31.3 billion euros in 2025, and holds, alone or in partnership, global or regional leadership positions in its core markets. Safran undertakes research and development programs to maintain the environmental priorities of its R&T and Innovation roadmaps. What does the role look like? We're seeking a strategic and inspiring Divisional Human Resources Director to lead the people agenda across our Landing Systems Gloucester sites, supporting both Original Equipment Manufacturer (OEM) and Maintenance, Repair & Overhaul (MRO) businesses. This is a pivotal leadership role operating within two distinct business models, each with challenges and significant growth opportunities. The successful candidate will play a key role in shaping the organisation's future-driving transformation, building organisational capability, and enabling sustainable performance through people. The successful candidate will have demonstrable experience of working in regulated P&L driven environments, covering a range of HR functions alongside being a proven leader who has a high degree of emotional intelligence. What will your day-to-day responsibilities look like? Deliver and develop the people strategy aligned with business objectives. Lead organisational development, design and workforce planning. Promote collaboration and engagement across functions, divisions and Safran businesses. Operate and lead across dual operating models. Translate business challenges into impactful and timely HR solutions. Use people analytics to inform decisions. Strengthen leadership and management capability. Embed and deepen talent development approaches. Lead a high-performing HR team. Strengthen HR's strategic and operational impact. Build trusted senior relationships across SLS and Safran Maintain strong Trade Union engagement and dialogue. Ensure compliance and promote inclusion. What will you bring to the role? Essential skills: Significant demonstratable HR leadership experience across regulated or P&L driven business' Experience across differing business models (preferably to include Engineering &/or Manufacturing) Proven background in transformation and talent strategy. Desirable skills: Proven ability to engage & drive high performing teams Ability to be strategic and able to demonstrate commercial awareness when making decisions Excellent influencing skills at all levels Adaptable and resilient Commitment to integrity, collaboration and transparency Experience in unionised environments
We are excited to offer a permanent opportunity for an accomplished Severn Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Severn Bridge Manager is responsible for the management of all technical, engineering and operational aspects relating to the Severn Bridge. This includes ensuring operational and structural safety, resilience, and compliance with statutory and contractual obligations. The Bridge Manager leads the planning and delivery of inspections, maintenance, renewals, and enhancements, and acts as the primary interface with the Client's team. The Severn Bridge is a nationally significant, Grade I listed suspension structure that has connected England and Wales since 1966, embodying engineering innovation through its pioneering aerodynamic deck design and enduring resilience in a challenging estuarial environment. As Bridge Manager, you will take stewardship of an asset that helped set new global standards for long-span bridge design, ensuring it remains safe, reliable, and future-ready for the millions who depend on it. This role is an opportunity to lead with purpose - preserving a landmark of engineering excellence while delivering high-quality service, robust maintenance, and operational assurance for one of the UK's most iconic crossings. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
Jun 29, 2026
Full time
We are excited to offer a permanent opportunity for an accomplished Severn Bridge Manager join our Specialist Bridges Inspection and Maintenance (SBIM) team in Bristol. The Severn Bridge Manager is responsible for the management of all technical, engineering and operational aspects relating to the Severn Bridge. This includes ensuring operational and structural safety, resilience, and compliance with statutory and contractual obligations. The Bridge Manager leads the planning and delivery of inspections, maintenance, renewals, and enhancements, and acts as the primary interface with the Client's team. The Severn Bridge is a nationally significant, Grade I listed suspension structure that has connected England and Wales since 1966, embodying engineering innovation through its pioneering aerodynamic deck design and enduring resilience in a challenging estuarial environment. As Bridge Manager, you will take stewardship of an asset that helped set new global standards for long-span bridge design, ensuring it remains safe, reliable, and future-ready for the millions who depend on it. This role is an opportunity to lead with purpose - preserving a landmark of engineering excellence while delivering high-quality service, robust maintenance, and operational assurance for one of the UK's most iconic crossings. As Bridge Manager, you'll steward this complex crossing, lead safe operations and targeted renewals, and proactively maintain its deck, welds, and access systems. Your leadership will keep the bridge resilient for road users, communities, and businesses alike. A central aspect of the role is to maximise value for money by driving operational efficiency and productivity. You'll coordinate workbanks, access, resources, and supply chains for smooth delivery and minimal disruption. The standard hours of work are 40 per week What You'll Do: Manage specialist bridge inspections, cyclic and reactive maintenance, and renewal schemes including design coordination and operational delivery. Ensure compliance and delivery of operations in accordance with CDM Regulations. Deliver maintenance solutions. Deliver incident response and instant repairs. Support delivery of renewal schemes including design, construction, and site supervision. Ensure compliance with ISO standards including ISO31000 (Risk Management), ISO22301 (Business Continuity), ISO9001 (Quality), and ISO14001 (Environmental). Maintain and manage Client's Stocks and Premises. Implement a management system that addresses the 'Purple book' and gantry O&M manuals for their respective bridge. Line management of an inspection and operations team. Provide technical leadership to a team of inspectors, Project Managers and delivery teams. Coordinate all work activities to maximise productivity, efficiency and value for money, ensuring seamless integration of inspections, maintenance, renewals and access operations. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Company Car / Car allowance Career Growth: Propel your career with clear, dynamic advancement opportunities to roles. Training Opportunities: Unlock your potential with comprehensive training tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: Essential Extensive technical expertise in large structures. Ability to manage complex portfolios, including inspections, design, and project delivery. Experience leading operational teams and projects from start to finish. Proven client relationship management with senior and sensitive stakeholders. Experience managing multiple projects and balancing tasks in live environments. Strong contract delivery experience, including NEC contracts, and understanding of programme, cost, risk, and safety. Ability to coordinate traffic, access, resources, and supply chain for safe and efficient works. Experience in high-risk, time-critical settings with rapid decision-making. Ability to integrate multiple workstreams and minimise disruption. Principal Contractor experience, with CDM and safe site operations knowledge. Leadership of multidisciplinary teams, ensuring compliance and safe delivery. Experience in contracting environments, with commercial awareness and risk mitigation. Understanding and delivery of commercial contracts, meeting business targets. Desirable Chartered Civil or Structural Engineer (MICE/MIStructE) or working towards chartership. NEC 4 Accredited Project Manager. Chartered APM, Prince 2, or equivalent qualification. Experience with remote monitoring systems (CCTV, WIM, wind monitoring, dehumidification). If you are passionate about engineering, thrive on technical challenges, and are ready to take a leading role in maintaining some of the UK's most significant bridges, we encourage you to apply. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to Kayla Caruth, our recruiter for this role, at (url removed)
A leading construction consultancy in Manchester is seeking a full-time Senior Building Surveyor to enhance their expanding team. This role will primarily focus on projects based in Manchester and the surrounding areas. The position offers a diverse range of responsibilities, providing essential support to the Surveying team on various projects, particularly in the commercial sector. Key Responsibilities: - Inspect and advise on the design, construction, maintenance, and refurbishment of all building types. - Conduct acquisition surveys, condition reports, measured surveys, and defect investigations. - Prepare detailed reports, schedules of work, and specifications. - Design and oversee works in accordance with established building contracts and current technical standards. - Manage large-scale projects independently, demonstrating comprehensive knowledge of professional consultancy services. - Apply relevant legislation, including health and safety, party wall, building regulations, and planning. - Actively promote the company's services to secure new projects and enhance the brand presence. - Support and supervise APC candidates to foster their professional development. - Ensure compliance with all company administrative and health & safety procedures. Candidate Profile: - MRICS accreditation or a desire to achieve it. - Extensive experience in consulting engineering, surveying, architecture, and planning, with a strong understanding of statutory requirements and technical publications. - Proficiency in defect diagnosis and report writing. - Experience with insurance repair projects is advantageous. - Background in negotiation and leadership roles. - Proven ability to manage deadlines and budgets on large projects. - Familiarity with CDM Regs 2015, Party Wall legislation, and Building Regulations. - Strong mathematical, scientific, and IT skills, with a methodical approach to problem-solving. - Excellent verbal and written communication abilities. - Flexible attitude toward work types. Benefits: The salary on offer will be between 45k - 55k depending on experience. The company offers a supportive environment with opportunities for professional growth, alongside a competitive remuneration package that rewards individual performance and includes an annual bonus. Please get in touch today with Jonathan Kirby on (phone number removed) or (phone number removed) for more details on opportunities available, or apply below with your CV. Building Careers UK are specialist in Construction & Property recruitment. BCUK acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. INDA
Oct 07, 2025
Full time
A leading construction consultancy in Manchester is seeking a full-time Senior Building Surveyor to enhance their expanding team. This role will primarily focus on projects based in Manchester and the surrounding areas. The position offers a diverse range of responsibilities, providing essential support to the Surveying team on various projects, particularly in the commercial sector. Key Responsibilities: - Inspect and advise on the design, construction, maintenance, and refurbishment of all building types. - Conduct acquisition surveys, condition reports, measured surveys, and defect investigations. - Prepare detailed reports, schedules of work, and specifications. - Design and oversee works in accordance with established building contracts and current technical standards. - Manage large-scale projects independently, demonstrating comprehensive knowledge of professional consultancy services. - Apply relevant legislation, including health and safety, party wall, building regulations, and planning. - Actively promote the company's services to secure new projects and enhance the brand presence. - Support and supervise APC candidates to foster their professional development. - Ensure compliance with all company administrative and health & safety procedures. Candidate Profile: - MRICS accreditation or a desire to achieve it. - Extensive experience in consulting engineering, surveying, architecture, and planning, with a strong understanding of statutory requirements and technical publications. - Proficiency in defect diagnosis and report writing. - Experience with insurance repair projects is advantageous. - Background in negotiation and leadership roles. - Proven ability to manage deadlines and budgets on large projects. - Familiarity with CDM Regs 2015, Party Wall legislation, and Building Regulations. - Strong mathematical, scientific, and IT skills, with a methodical approach to problem-solving. - Excellent verbal and written communication abilities. - Flexible attitude toward work types. Benefits: The salary on offer will be between 45k - 55k depending on experience. The company offers a supportive environment with opportunities for professional growth, alongside a competitive remuneration package that rewards individual performance and includes an annual bonus. Please get in touch today with Jonathan Kirby on (phone number removed) or (phone number removed) for more details on opportunities available, or apply below with your CV. Building Careers UK are specialist in Construction & Property recruitment. BCUK acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website. INDA
Senior Electronics Test Engineer Job Type: Full-time Location: Southeast Essex Salary: £35,000 - £40,000 We are seeking a Senior Electronics Test Engineer to join our dynamic team. This role involves functional testing of board-level audio products, ensuring all equipment is tested, calibrated, and certified according to the corresponding procedures. The ideal candidate will have extensive experience in fault finding electronics down to the component level and providing technical support to production teams. Day-to-day of the role: Conduct functional testing of board-level audio products, ensuring compliance with test procedures. Fault find and repair final assemblies and sub-assemblies as required. Perform reworking of boards to a high standard, including single-sided and PTH multi-layer PCBs with through-hole and surface mount components. Provide technical support to the production team as necessary. Produce and maintain test procedures in conjunction with the Design team. Read and understand circuit schematics and grasp the functionality of analogue and digital circuits of moderate complexity. Manage time effectively to ensure tasks are completed timely. Follow and enforce health and safety procedures within the workplace. Maintain tools in good condition and report any issues to the appropriate personnel. Ensure the department is kept clean and tidy at all times. Required Skills & Qualifications: Proven experience as an Electronics Test Engineer. Strong ability to fault find to the component level. Experience with both through-hole and surface mount components. Ability to read and interpret circuit schematics. Excellent organisational and time management skills. Commitment to maintaining a safe and orderly work environment. Additional Information: Salary £35,000 - £40,000 per annum Free lunches and drinks daily Onsite Parking Working hours - 08:30am - 17:00pm, Monday to Friday Competitive holiday and overall benefit package Inclusive, and positive working environment that encourages personal development and individuality! To apply for the Senior Electronics Test Engineer position, please submit your CV detailing your relevant experience and why you are interested in this role.
Oct 07, 2025
Full time
Senior Electronics Test Engineer Job Type: Full-time Location: Southeast Essex Salary: £35,000 - £40,000 We are seeking a Senior Electronics Test Engineer to join our dynamic team. This role involves functional testing of board-level audio products, ensuring all equipment is tested, calibrated, and certified according to the corresponding procedures. The ideal candidate will have extensive experience in fault finding electronics down to the component level and providing technical support to production teams. Day-to-day of the role: Conduct functional testing of board-level audio products, ensuring compliance with test procedures. Fault find and repair final assemblies and sub-assemblies as required. Perform reworking of boards to a high standard, including single-sided and PTH multi-layer PCBs with through-hole and surface mount components. Provide technical support to the production team as necessary. Produce and maintain test procedures in conjunction with the Design team. Read and understand circuit schematics and grasp the functionality of analogue and digital circuits of moderate complexity. Manage time effectively to ensure tasks are completed timely. Follow and enforce health and safety procedures within the workplace. Maintain tools in good condition and report any issues to the appropriate personnel. Ensure the department is kept clean and tidy at all times. Required Skills & Qualifications: Proven experience as an Electronics Test Engineer. Strong ability to fault find to the component level. Experience with both through-hole and surface mount components. Ability to read and interpret circuit schematics. Excellent organisational and time management skills. Commitment to maintaining a safe and orderly work environment. Additional Information: Salary £35,000 - £40,000 per annum Free lunches and drinks daily Onsite Parking Working hours - 08:30am - 17:00pm, Monday to Friday Competitive holiday and overall benefit package Inclusive, and positive working environment that encourages personal development and individuality! To apply for the Senior Electronics Test Engineer position, please submit your CV detailing your relevant experience and why you are interested in this role.
Senior Electronics Test Engineer Job Type: Full-time Location: Southeast Essex Salary: £35,000 - £40,000 We are seeking a Senior Electronics Test Engineer to join our dynamic team. This role involves functional testing of board-level audio products, ensuring all equipment is tested, calibrated, and certified according to the corresponding procedures. The ideal candidate will have extensive experience in fault finding electronics down to the component level and providing technical support to production teams. Day-to-day of the role: Conduct functional testing of board-level audio products, ensuring compliance with test procedures. Fault find and repair final assemblies and sub-assemblies as required. Perform reworking of boards to a high standard, including single-sided and PTH multi-layer PCBs with through-hole and surface mount components. Provide technical support to the production team as necessary. Produce and maintain test procedures in conjunction with the Design team. Read and understand circuit schematics and grasp the functionality of analogue and digital circuits of moderate complexity. Manage time effectively to ensure tasks are completed timely. Follow and enforce health and safety procedures within the workplace. Maintain tools in good condition and report any issues to the appropriate personnel. Ensure the department is kept clean and tidy at all times. Required Skills & Qualifications: Proven experience as an Electronics Test Engineer. Strong ability to fault find to the component level. Experience with both through-hole and surface mount components. Ability to read and interpret circuit schematics. Excellent organisational and time management skills. Commitment to maintaining a safe and orderly work environment. Additional Information: Salary £35,000 - £40,000 per annum Free lunches and drinks daily Onsite Parking Working hours - 08:30am - 17:00pm, Monday to Friday Competitive holiday and overall benefit package Inclusive, and positive working environment that encourages personal development and individuality! To apply for the Senior Electronics Test Engineer position, please submit your CV detailing your relevant experience and why you are interested in this role.
Oct 07, 2025
Full time
Senior Electronics Test Engineer Job Type: Full-time Location: Southeast Essex Salary: £35,000 - £40,000 We are seeking a Senior Electronics Test Engineer to join our dynamic team. This role involves functional testing of board-level audio products, ensuring all equipment is tested, calibrated, and certified according to the corresponding procedures. The ideal candidate will have extensive experience in fault finding electronics down to the component level and providing technical support to production teams. Day-to-day of the role: Conduct functional testing of board-level audio products, ensuring compliance with test procedures. Fault find and repair final assemblies and sub-assemblies as required. Perform reworking of boards to a high standard, including single-sided and PTH multi-layer PCBs with through-hole and surface mount components. Provide technical support to the production team as necessary. Produce and maintain test procedures in conjunction with the Design team. Read and understand circuit schematics and grasp the functionality of analogue and digital circuits of moderate complexity. Manage time effectively to ensure tasks are completed timely. Follow and enforce health and safety procedures within the workplace. Maintain tools in good condition and report any issues to the appropriate personnel. Ensure the department is kept clean and tidy at all times. Required Skills & Qualifications: Proven experience as an Electronics Test Engineer. Strong ability to fault find to the component level. Experience with both through-hole and surface mount components. Ability to read and interpret circuit schematics. Excellent organisational and time management skills. Commitment to maintaining a safe and orderly work environment. Additional Information: Salary £35,000 - £40,000 per annum Free lunches and drinks daily Onsite Parking Working hours - 08:30am - 17:00pm, Monday to Friday Competitive holiday and overall benefit package Inclusive, and positive working environment that encourages personal development and individuality! To apply for the Senior Electronics Test Engineer position, please submit your CV detailing your relevant experience and why you are interested in this role.
Job Role: Lead Maintenance Engineer (Electrical Bias) Location: Northampton, NN3 Salary: £52,000-£57,000 Hours: Monday - Friday 08.00-17.00 Full time, Permanent The Client Interaction Recruitment are working in partnership with a global manufacturer of specialist glass products for the automotive and construction industries. Based in Northampton, the company is seeking a Lead Engineer to join their dynamic team and support plant operations through leadership, technical expertise, and continuous improvement. The Benefits • 25 days holiday + bank holidays • 10% Pension • Health Shield • Life Insurance • Company uniform • Pay reviews after probation The Role • Lead and manage the engineering team, ensuring motivation, development, and performance • Act as the designated Responsible Person for safety, compliance, and operational standards • Carry out electrical and mechanical installations, maintenance, and repairs on manufacturing equipment • Troubleshoot faults, calibrate vision systems, and support automation technologies • Collaborate with production teams to minimise downtime and improve efficiency • Analyse performance data to identify areas for improvement and implement effective solutions • Coordinate planned maintenance schedules and manage external contractors • Contribute to the development and refinement of Standard Operating Procedures • Support capital investment planning and supplier engagement The Requirements • Proven experience in a senior engineering or team leadership role within a manufacturing environment • Strong electrical background 17th/18th Edition certification preferred • Hands-on experience with fault finding and repairs on electromechanical systems • Formal engineering qualifications (HNC/HND or equivalent) desirable • Experience with vision systems, control systems, and automation technologies • Knowledge of lean manufacturing principles and continuous improvement tools • Excellent communication and leadership skills, with a proactive and analytical mindset • Automotive industry experience is a plus Interaction Recruitment have specialist consultants across multiple UK industries including Engineering, Industrial, Finance, and Commercial. For more information or to apply, contact Michael Watson on (phone number removed) or email (url removed). INDNH
Oct 06, 2025
Full time
Job Role: Lead Maintenance Engineer (Electrical Bias) Location: Northampton, NN3 Salary: £52,000-£57,000 Hours: Monday - Friday 08.00-17.00 Full time, Permanent The Client Interaction Recruitment are working in partnership with a global manufacturer of specialist glass products for the automotive and construction industries. Based in Northampton, the company is seeking a Lead Engineer to join their dynamic team and support plant operations through leadership, technical expertise, and continuous improvement. The Benefits • 25 days holiday + bank holidays • 10% Pension • Health Shield • Life Insurance • Company uniform • Pay reviews after probation The Role • Lead and manage the engineering team, ensuring motivation, development, and performance • Act as the designated Responsible Person for safety, compliance, and operational standards • Carry out electrical and mechanical installations, maintenance, and repairs on manufacturing equipment • Troubleshoot faults, calibrate vision systems, and support automation technologies • Collaborate with production teams to minimise downtime and improve efficiency • Analyse performance data to identify areas for improvement and implement effective solutions • Coordinate planned maintenance schedules and manage external contractors • Contribute to the development and refinement of Standard Operating Procedures • Support capital investment planning and supplier engagement The Requirements • Proven experience in a senior engineering or team leadership role within a manufacturing environment • Strong electrical background 17th/18th Edition certification preferred • Hands-on experience with fault finding and repairs on electromechanical systems • Formal engineering qualifications (HNC/HND or equivalent) desirable • Experience with vision systems, control systems, and automation technologies • Knowledge of lean manufacturing principles and continuous improvement tools • Excellent communication and leadership skills, with a proactive and analytical mindset • Automotive industry experience is a plus Interaction Recruitment have specialist consultants across multiple UK industries including Engineering, Industrial, Finance, and Commercial. For more information or to apply, contact Michael Watson on (phone number removed) or email (url removed). INDNH
Technical Sales & Business Development Manager This challenging and exciting opportunity, based from home, requires an individual with a technical background and proven experience in taking the lead to develop and ultimately secure opportunities from the construction, civil engineering or infrastructure sectors. This Technical Sales and Business Development Manager role is to cover the London and Southeast region. Due to a dedication to continued profitable, ambitious and long-term growth, our client now seeks to appoint a Technical Sales & Business Development Manager for their London and South East business operation, with the focus upon developing, maintaining and managing clients. The role will provide support to the Sales Director and will lead the management and development of new and existing clients. This will be successfully achieved through effective engagement and servicing of associated stakeholders, and a focus upon maintaining net margins, whilst liaising closely with the senior management team in providing regular business reporting in regard to sales and business development matters. The Role You will be responsible for the ongoing development and continued success with both existing and new clients, whilst helping to develop and secure new project opportunities You will possess demonstrable achievement within any area of the aforementioned sectors You will have the ability to nurture profitable relationships with a wide cross section of clients, whilst also providing appropriate technical advice and guidance if required You will manage your own workload and develop and nurture clients effectively Provide regular progress reporting to the management in regard to potential opportunities You should be outgoing with excellent negotiation, communication and presentation skills, and have the ability to form long term mutually beneficial and harmonious relationships with clients and customers of all levels The Person You will offer an advanced level of technical sales expertise and client support experience gained from working within any area of the above-mentioned sectors, or variations thereof You will have demonstrable and advanced technical client development and management experience in a similar role within the aforementioned areas You will hold a full UK driving licence and be proficient in Microsoft Office packages You will be qualified to a minimum level of an HNC in any related discipline Our Client Our client is one of the UK s leading specialist contractors, renowned for providing technically advanced and cost-effective solutions across the structural support, ground stabilisation, land remediation, foundations, underpinning, ground improvement, stabilisation, geotechnical engineering and subsidence repair sectors. Their offering includes design, build, installation and non-disruptive services provided to all areas of the residential, social housing, local authorities, housing associations and public sectors. Their reputation is built on engineering excellence and a commitment to continual innovation, backed by a central technical design and engineering resource, ensuring they deliver a full range of techniques bespoke to any requirement and specification. A very attractive basic salary, plus a highly lucrative bonus scheme, and an extensive benefits package is on offer to the successful candidate, along with longevity of career given the dedicated and ambitious growth plans and forward order workload for the UK.
Oct 06, 2025
Full time
Technical Sales & Business Development Manager This challenging and exciting opportunity, based from home, requires an individual with a technical background and proven experience in taking the lead to develop and ultimately secure opportunities from the construction, civil engineering or infrastructure sectors. This Technical Sales and Business Development Manager role is to cover the London and Southeast region. Due to a dedication to continued profitable, ambitious and long-term growth, our client now seeks to appoint a Technical Sales & Business Development Manager for their London and South East business operation, with the focus upon developing, maintaining and managing clients. The role will provide support to the Sales Director and will lead the management and development of new and existing clients. This will be successfully achieved through effective engagement and servicing of associated stakeholders, and a focus upon maintaining net margins, whilst liaising closely with the senior management team in providing regular business reporting in regard to sales and business development matters. The Role You will be responsible for the ongoing development and continued success with both existing and new clients, whilst helping to develop and secure new project opportunities You will possess demonstrable achievement within any area of the aforementioned sectors You will have the ability to nurture profitable relationships with a wide cross section of clients, whilst also providing appropriate technical advice and guidance if required You will manage your own workload and develop and nurture clients effectively Provide regular progress reporting to the management in regard to potential opportunities You should be outgoing with excellent negotiation, communication and presentation skills, and have the ability to form long term mutually beneficial and harmonious relationships with clients and customers of all levels The Person You will offer an advanced level of technical sales expertise and client support experience gained from working within any area of the above-mentioned sectors, or variations thereof You will have demonstrable and advanced technical client development and management experience in a similar role within the aforementioned areas You will hold a full UK driving licence and be proficient in Microsoft Office packages You will be qualified to a minimum level of an HNC in any related discipline Our Client Our client is one of the UK s leading specialist contractors, renowned for providing technically advanced and cost-effective solutions across the structural support, ground stabilisation, land remediation, foundations, underpinning, ground improvement, stabilisation, geotechnical engineering and subsidence repair sectors. Their offering includes design, build, installation and non-disruptive services provided to all areas of the residential, social housing, local authorities, housing associations and public sectors. Their reputation is built on engineering excellence and a commitment to continual innovation, backed by a central technical design and engineering resource, ensuring they deliver a full range of techniques bespoke to any requirement and specification. A very attractive basic salary, plus a highly lucrative bonus scheme, and an extensive benefits package is on offer to the successful candidate, along with longevity of career given the dedicated and ambitious growth plans and forward order workload for the UK.
Senior Service Engineer Location: Stockport (with national and international travel) Salary: £50,000 - £55,000 + Annual Discretionary Bonus + Pension Job Type: Full-time, Permanent Based in Stockport , we are a specialist in the design and build of inspection and simulation machines . Due to continued growth, we are expanding our team and seeking a Senior Service Engineer to join us. This is a fantastic opportunity to work on cutting-edge technology in a dynamic and growing business. Key Responsibilities Technical Leadership & Support Provide advanced technical support, diagnose and troubleshoot complex hardware and software issues, and lead service interventions and projects. Mentoring & Training Mentor and guide junior engineers, providing training on new features, best practices, and advanced troubleshooting techniques. System Management Oversee system performance, conduct regular audits and performance assessments, and ensure optimal system reliability. Documentation & Reporting Maintain detailed records of service activities, system configurations, and equipment maintenance. Customer Engagement Build strong relationships with customers, provide clear feedback, explain product functionality, and manage technical issues to maximize customer benefit. Safety & Compliance Ensure all service activities comply with company policies, industry standards, safety regulations, and relevant legislation. Collaboration Work with cross-functional teams, including design and product development, to resolve technical problems and implement system improvements. Person Specification Education : Bachelor's degree in an engineering discipline (e.g., Mechanical, Electrical, Computer Science) or equivalent experience. Experience : Typically requires 5+ years of experience in a service engineering role, with proven ability in troubleshooting and repair of complex systems. Proven track record of working in a similar role. Technical Skills : Strong understanding of mechanical, electrical, or electronic systems, and often experience with specific Operational Technology (OT) systems or Distributed Control Systems (DCS). Soft Skills : Excellent problem-solving, communication, customer service, leadership, teamwork, and adaptability are essential for bridging technical and non-technical stakeholders. Additional Requirements: Willingness to travel nationally and internationally, work flexible hours, including evenings and weekends to meet service needs and respond to breakdowns Full UK driving license and a valid passport with no travel restrictions are essential. Flexibility, professionalism, and a proactive approach with drive to identify improvements, monitor service health and proactively address potential issues to prevent future problems. A commitment to service excellence and a desire to understand and respond to client problems. Must be eligible to work in the UK as visa sponsorship cannot be provided.
Oct 06, 2025
Full time
Senior Service Engineer Location: Stockport (with national and international travel) Salary: £50,000 - £55,000 + Annual Discretionary Bonus + Pension Job Type: Full-time, Permanent Based in Stockport , we are a specialist in the design and build of inspection and simulation machines . Due to continued growth, we are expanding our team and seeking a Senior Service Engineer to join us. This is a fantastic opportunity to work on cutting-edge technology in a dynamic and growing business. Key Responsibilities Technical Leadership & Support Provide advanced technical support, diagnose and troubleshoot complex hardware and software issues, and lead service interventions and projects. Mentoring & Training Mentor and guide junior engineers, providing training on new features, best practices, and advanced troubleshooting techniques. System Management Oversee system performance, conduct regular audits and performance assessments, and ensure optimal system reliability. Documentation & Reporting Maintain detailed records of service activities, system configurations, and equipment maintenance. Customer Engagement Build strong relationships with customers, provide clear feedback, explain product functionality, and manage technical issues to maximize customer benefit. Safety & Compliance Ensure all service activities comply with company policies, industry standards, safety regulations, and relevant legislation. Collaboration Work with cross-functional teams, including design and product development, to resolve technical problems and implement system improvements. Person Specification Education : Bachelor's degree in an engineering discipline (e.g., Mechanical, Electrical, Computer Science) or equivalent experience. Experience : Typically requires 5+ years of experience in a service engineering role, with proven ability in troubleshooting and repair of complex systems. Proven track record of working in a similar role. Technical Skills : Strong understanding of mechanical, electrical, or electronic systems, and often experience with specific Operational Technology (OT) systems or Distributed Control Systems (DCS). Soft Skills : Excellent problem-solving, communication, customer service, leadership, teamwork, and adaptability are essential for bridging technical and non-technical stakeholders. Additional Requirements: Willingness to travel nationally and internationally, work flexible hours, including evenings and weekends to meet service needs and respond to breakdowns Full UK driving license and a valid passport with no travel restrictions are essential. Flexibility, professionalism, and a proactive approach with drive to identify improvements, monitor service health and proactively address potential issues to prevent future problems. A commitment to service excellence and a desire to understand and respond to client problems. Must be eligible to work in the UK as visa sponsorship cannot be provided.
Senior Fire Alarm Engineer This is a position which services the London and surrounding areas, ideally you will be multi disciplined in the fire industry from, installation, commissioning and small day work repairs. 40K - 47K (Depending on experience) Base Salary + Commission + Van + Other benefits The higher end of the salary bracket will go to multi skilled fire alarm engineers experienced in Gent, Notifier panels etc The Role: Carrying out planned service and maintenance tasks on a varied customer base - from a retail unit to an office block. Carrying out a range of tasks from small works to commissioning. Opportunity to carry out some larger installation work on projects for those with a desire to develop and enhance their install skills. Use existing knowledge and experience to fault find. Offering a comprehensive service to our customers in accordance with British Standards in a defined area. The ideal candidate must have: Minimum of 5 years of experience in Fire System maintenance/installation. FIA Installation and Maintenance Module Experience of open / Close protocol fire alarm systems Electrical design with fire alarm element Working knowledge of BS5839 & current Health & Safety legislation The ability to work to time sensitive deadlines Strong problem-solving ability and attention to detail Full UK driving licence
Oct 06, 2025
Full time
Senior Fire Alarm Engineer This is a position which services the London and surrounding areas, ideally you will be multi disciplined in the fire industry from, installation, commissioning and small day work repairs. 40K - 47K (Depending on experience) Base Salary + Commission + Van + Other benefits The higher end of the salary bracket will go to multi skilled fire alarm engineers experienced in Gent, Notifier panels etc The Role: Carrying out planned service and maintenance tasks on a varied customer base - from a retail unit to an office block. Carrying out a range of tasks from small works to commissioning. Opportunity to carry out some larger installation work on projects for those with a desire to develop and enhance their install skills. Use existing knowledge and experience to fault find. Offering a comprehensive service to our customers in accordance with British Standards in a defined area. The ideal candidate must have: Minimum of 5 years of experience in Fire System maintenance/installation. FIA Installation and Maintenance Module Experience of open / Close protocol fire alarm systems Electrical design with fire alarm element Working knowledge of BS5839 & current Health & Safety legislation The ability to work to time sensitive deadlines Strong problem-solving ability and attention to detail Full UK driving licence
