22 jobs found

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most click apply for full job details

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Workshop Controller - Bodyshop / Accident Repair Glasgow 45,000 OTE 55,000 Permanent Position, Monday to Friday only 5 Hours per week - No Weekends Pension, Sick pay, Health cash plan, Dental care, retail discounts, 29 days annual leave Well established accident repair group For more information call Rochelle on (phone number removed) Accident Repair Centre Workshop Controller - We currently have a rewarding opportunity to join a growing and reputable BSI Accident Repair Group, based at their Glasgow site, which is currently expanding due to increased business and workload. Ideally, to be successful in this specific workshop controller position, you will have experience working within a mainstream accident repair centre, dealing with insurance led crash repairs and accident damaged vehicles. The Job: Workshop Controller / Bodyshop Controller Liaise with production staff to monitor the number of vehicles coming into the site for repair Oversee around 10 skilled repair technicians within the bodyshop, combining Panel beaters, MET Technicians and Paint sprayers. The role is responsible for ensuring all incoming work is planned as well as managing the time and resource. As a Workshop Controller, you will assign technicians, panel beaters, MET Technicians, Vehicle Paint Sprayers etc, to tasks ensuring productivity is maximised and that deadlines are adhered to. Plan your workload effectively to ensure vehicles are ready to agree timescales; Carry out work in accordance with manufacturers specification. Optimum utilisation of resources within area of responsibility as set out in targets To deliver the customer service standards as outlined by the company procedures and policies Ability to monitor and control workshop output and efficiencies Verbal explanation of the repair procedure and process to the workshop and customers and variable levels of understanding Job Experience Required: Skills in applying and using knowledge in a supervisory position. Knowledge and understanding of the provisions of E.P.A. and H&S. BSI PAS 101, Advance, preferred Experience in dealing with and resolving Health & Safety issues IND123 If you would like to be considered for the Workshop controller job, please call Clear Automotive and ask for Rochelle on (phone number removed) or apply for the job and we will be in touch with you. We are also looking for candidates with the following skill sets: Panel Beater, Panel Technician, Bodyshop MET, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Production Manager, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Manager, Regional and General Manager, Service Advisor, Service Manager, Parts Advisor, Parts Manager and more.

MET Technician Exeter Up 49,000 OTE 65,000 + (Base salary negotiable DOE + Bonus) Why join Us? Time Saved Bonus - banked weekly & paid monthly Monday to Friday only Access 30% of your wages in advance every month 29 days annual leave (increasing with service) Clear progression opportunities within an expanding company Enhanced sick pay Plus, many more great benefits For more information, please call Rochelle on: (phone number removed) MET Technician / Strip Fitter We currently have a fantastic opportunity for an experienced MET Technician, Mechanic, Strip and Fitter from an Accident repair background, to join a fantastic employer within the accident repair industry. Our client focusses on quality repairs over rushed repairs and as such are seeking an MET technician who takes pride in the quality of their work. This job role is a Skilled MET Technician position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: ATA MET Technician / Mechanic Strip Fitter Remove & refit mechanical and electrical trims / panels / components on vehicles Ensure that stripping and rebuilding work of all vehicles is carried out in a professional and correct manner and that final quality checks are undertaken in line with applicable standards Dismantling vehicles ready for the panel area Carrying out inspections, fault finding and diagnostic work Ordering replacement parts Re-assembling the vehicle with new parts as required to pre-accident condition Stripping and fitting components, bodywork and trim elements All MET duties required within your remit Follow manufacturer repair methods to return vehicles to pre-accident condition Fault finding / Diagnostics Ensure that all jobs are completed within the estimated times If you would like to be considered for the MET Technician job, please call Rochelle at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more IND123

MET Technician Stratford Upon Avon Up To 50,000 Basic Salary 55,000 OTE Accident Repair centre, Monday to Friday 29 days annual leave, rising with years of service, private Healthcare plan, progression available, expanding company Enhanced maternity and paternity, Sick pay and more great benefits Busy Repair Centre For more information, please call Callum on: (phone number removed) MET Technician We currently have a fantastic opportunity for an experienced MET Technician, Mechanic, Strip and Fitter from an Accident repair background, to join a fantastic employer within the accident repair industry. Our client focusses on quality repairs over rushed repairs and as such are seeking an MET technician who takes pride in the quality of their work. This job role is a Skilled MET Technician position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: ATA MET Technician / Mechanic Strip Fitter Remove & refit mechanical and electrical trims / panels / components on vehicles Ensure that stripping and rebuilding work of all vehicles is carried out in a professional and correct manner and that final quality checks are undertaken in line with applicable standards Dismantling vehicles ready for the panel area Carrying out inspections, fault finding and diagnostic work Ordering replacement parts Re-assembling the vehicle with new parts as required to pre-accident condition Stripping and fitting components, bodywork and trim elements All MET duties required within your remit Follow manufacturer repair methods to return vehicles to pre-accident condition Fault finding / Diagnostics Ensure that all jobs are completed within the estimated times If you would like to be considered for the MET Technician job, please call Callum at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more Clear Automotive Recruitment Solutions are a leading Motor trade recruitment specialist covering all areas of the UK. We cater for both permanent and contract positions, so please contact one of our consultants to discuss how we can help you with your next career move in confidence. IND123

Panel Beater Glasgow 45,000 - 55,000 Monday - Friday Only, 42.5 Hours per week Up to 850 monthly bonus Flexible start and finish times Excellent working conditions Enhanced maternity and paternity, Sick pay and more great benefits Wagestream - Access up to 30% of your wages in advance every month! For more information, please call Callum on: (phone number removed) Panel Beater: We currently have a permanent opportunity for an experienced panel beater to join a leading automotive brand in the accident repair industry. Working for a fantastic manager, you will be joining a team that is highly skilled and stable. The Job: ATA Panel Beater Repair or replace as necessary bodywork panels of damaged vehicles according to the instructions received or details on the job card. This will include chassis and framework. Stripping and fitting panels and bodywork You will be required to efficiently repair vehicles checking on completion ensuring there are no defects including changing quarter panels, filler work, stripping a vehicle down and rebuilding it. Panel straightening and filler to repair dents Replacement of panels Welding and bonding of vehicle structure Removing & replacing complete body shell Adhere to the manufacturer's literature and modification bulletins as appropriate to the repair and to the replacement of chassis and panel work. To ensure that all equipment used, to include jigs, fixtures and welding equipment, is operated in accordance with defined safety requirements. The role is to carry out all panel beater repair work on all makes of vehicles and to be able demonstrate a full range of vehicle body repairs including jig work. Repair and replace body components to damaged vehicles to pre-accident condition and to Kitemark BS10125 and manufacturer's standards Job Experience - Panel Beater A working and demonstrable knowledge of vehicle panel repairs Relevant panel qualifications - IMI 3, NVQ 3 or ATA Panel Beater Accreditation desirable but not essential Panel beater Experience is required If you would like to be considered for the Panel Beater job role, please call Callum at Clear Automotive on (phone number removed) or email your CV for an immediate interview We are also looking for candidates with the following skill sets: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident Repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Production Manager, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Manager, Regional and General Manager, Service Advisor, Service Manager, Parts Advisor, Parts Manager and more. IND123

Panel Beater Luton 45,000 - 55,000 Monday - Friday Only, 42.5 Hours per week Up to 850 monthly bonus Flexible start and finish times Excellent working conditions Enhanced maternity and paternity, Sick pay and more great benefits Wagestream - Access up to 30% of your wages in advance every month! For more information, please call Callum on: (phone number removed) Panel Beater: We currently have a permanent opportunity for an experienced panel beater to join a leading automotive brand in the accident repair industry. Working for a fantastic manager, you will be joining a team that is highly skilled and stable. The Job: ATA Panel Beater Repair or replace as necessary bodywork panels of damaged vehicles according to the instructions received or details on the job card. This will include chassis and framework. Stripping and fitting panels and bodywork You will be required to efficiently repair vehicles checking on completion ensuring there are no defects including changing quarter panels, filler work, stripping a vehicle down and rebuilding it. Panel straightening and filler to repair dents Replacement of panels Welding and bonding of vehicle structure Removing & replacing complete body shell Adhere to the manufacturer's literature and modification bulletins as appropriate to the repair and to the replacement of chassis and panel work. To ensure that all equipment used, to include jigs, fixtures and welding equipment, is operated in accordance with defined safety requirements. The role is to carry out all panel beater repair work on all makes of vehicles and to be able demonstrate a full range of vehicle body repairs including jig work. Repair and replace body components to damaged vehicles to pre-accident condition and to Kitemark BS10125 and manufacturer's standards Job Experience - Panel Beater A working and demonstrable knowledge of vehicle panel repairs Relevant panel qualifications - IMI 3, NVQ 3 or ATA Panel Beater Accreditation desirable but not essential Panel beater Experience is required If you would like to be considered for the Panel Beater job role, please call Callum at Clear Automotive on (phone number removed) or email your CV for an immediate interview We are also looking for candidates with the following skill sets: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident Repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Production Manager, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Manager, Regional and General Manager, Service Advisor, Service Manager, Parts Advisor, Parts Manager and more. IND123

Nu-Staff are working with Safran Seats to support one of their main manufacturing locations based in Cwmbran with the recruitment of a Paint Sprayer / Paint Technician on nights. Job Summary To apply a wide range of water based and solvent based paint finishes to metallic, composite and plastic substrates. Achieve a high quality finish in line with engineering process specification, drawing and customer requirements. Scope of Responsibilities Work as a part of a small team of skilled paint technicians. Report any issues or constraints to operations line leader in a timely manner. Accept responsibility for on time delivery of quality conforming product. Be able to work with a wide range of support functions including manufacturing engineers, line leaders, production controllers and production co-ordinators. Participate in improvement activities as and when required to do so Key Responsibilities Preparing, mixing and applying various primers, paints and top coats as per colour document requirements. Preparing substrate surfaces for priming and top coating. Polishing where required, by use of hand or air tools. Masking to drawing requirements to ensure correct finish is achieved. Maintaining spray equipment. Maintain a safe and clean working environment through adherence to 5S principles. Compliance with all PPE requirements as identified in area Risk Assessments and COSHH assessments etc. Organising own workload in line with business requirements Experience in decorative paint spraying is essential Hours & Pay Monday - Friday mornings and afternoons rotating - £19.38ph Sunday to thursday night shifts - £21.00ph. Saturday overtime is paid at x1.5 Sunday overtime is paid at x2.

MET Technician Oldbury Up To 50,000 Basic Salary 55,000 OTE Accident Repair centre, Monday to Friday 29 days annual leave, rising with years of service, private Healthcare plan, progression available, expanding company Enhanced maternity and paternity, Sick pay and more great benefits Busy Repair Centre For more information, please call Callum on: (phone number removed) MET Technician We currently have a fantastic opportunity for an experienced MET Technician, Mechanic, Strip and Fitter from an Accident repair background, to join a fantastic employer within the accident repair industry. Our client focusses on quality repairs over rushed repairs and as such are seeking an MET technician who takes pride in the quality of their work. This job role is a Skilled MET Technician position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: ATA MET Technician / Mechanic Strip Fitter Remove & refit mechanical and electrical trims / panels / components on vehicles Ensure that stripping and rebuilding work of all vehicles is carried out in a professional and correct manner and that final quality checks are undertaken in line with applicable standards Dismantling vehicles ready for the panel area Carrying out inspections, fault finding and diagnostic work Ordering replacement parts Re-assembling the vehicle with new parts as required to pre-accident condition Stripping and fitting components, bodywork and trim elements All MET duties required within your remit Follow manufacturer repair methods to return vehicles to pre-accident condition Fault finding / Diagnostics Ensure that all jobs are completed within the estimated times If you would like to be considered for the MET Technician job, please call Callum at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more Clear Automotive Recruitment Solutions are a leading Motor trade recruitment specialist covering all areas of the UK. We cater for both permanent and contract positions, so please contact one of our consultants to discuss how we can help you with your next career move in confidence. IND123