166 jobs found

CS 33636 Shift Electrical Maintenance Supervisor Redcar 48,987 + 2% Shift Allowance Ready to take the next step into a leadership role where you can make a real impact? We're recruiting an experienced Electrical Maintenance Shift Supervisor to join a leading UK industrial organisation at its Redcar site. This is an excellent opportunity for an experienced Maintenance Supervisor, Lead Engineer or Senior Maintenance Engineer looking to combine hands-on engineering with team leadership in a modern production environment. If you thrive on solving problems, improving reliability and developing people, we'd love to hear from you. What's in it for you? Salary: 48,987.12 per annum Plus 2% Shift Allowance Shift Pattern: 4 x 12-hour day shifts followed by 4 days off (7am-7pm) Excellent work-life balance with regular four-day breaks Generous pension scheme Medical and dental cover Retail, leisure and holiday discounts Cycle to Work scheme Ongoing training, development and genuine career progression within a growing national organisation Why This Role? This isn't just another maintenance position. You'll be trusted to lead a skilled engineering team, keeping critical plant and equipment operating safely and efficiently while driving continuous improvement across the site. You'll have the opportunity to influence engineering standards, improve plant performance and mentor engineers, all while remaining involved in the technical aspects of the role. If you enjoy leading from the front rather than managing from behind a desk, this role offers the perfect balance of leadership and hands-on engineering. What You'll Be Doing Leading and coordinating engineering and maintenance activities across the site Managing planned preventative maintenance (PPM) and reactive maintenance to maximise plant availability Supporting engineers during breakdowns, ensuring faults are diagnosed and resolved quickly Driving high engineering standards, compliance and safe working practices Identifying recurring equipment issues and implementing long-term engineering solutions Championing continuous improvement initiatives to improve reliability and operational performance Coordinating specialist maintenance work with external contractors and suppliers Supporting maintenance planning, permit systems and engineering scheduling Promoting excellent housekeeping alongside health, safety and environmental compliance Coaching, mentoring and supporting engineers to develop both capability and performance What We're Looking For You'll be an experienced maintenance professional with strong leadership skills and a passion for engineering excellence. Ideally, you'll have: NVQ Level 3 Engineering qualification (Electrical bias preferred) Previous experience in a Maintenance Supervisor, Engineering Supervisor or Lead Engineer position Strong experience maintaining production or industrial machinery Electrical fault-finding experience with PLCs, VSDs and relay logic circuits Good knowledge of planned preventative maintenance systems Excellent communication, organisation and team leadership skills A proactive mindset with a focus on continuous improvement and problem solving To apply for this position please send your CV to (url removed) or call (phone number removed) ext 202 for more information. INDW

Electrical Supervisor (Construction / Logistics) £44,000 - £50,000 + Company Vehicle + 32 Days Holiday + Clear Progression + Training Oxford Are you an Electrical Engineer with a background in commercial and industrial projects, looking to take the next step in your career at a growing and highly established contractor? On offer is the opportunity to join a long-established and rapidly expanding electrical contractor with a strong reputation for delivering high-quality, reliable service across a diverse range of projects. The business has built strong, long-term client relationships by consistently delivering safe, efficient, and detail-focused workmanship across both small and large-scale projects. Your role will involve taking on full responsibility of small-scale projects from £250,000 upwards. This will include preparing pricing, liaising with clients and ordering materials. In addition, you will help onboard new suppliers and carry out reactive maintenance where required. A clear progression path is there to develop into a Qualifying Supervisor. This role would suit an electrical engineer, who has good leadership and management skills, looking to further their career. The Role Managing small-scale projects Acting as main contact for clients Preparing pricing and ordering materials Onboarding new suppliers Performing maintenance where required The Person Experience in Electrical Engineering within a construction environment Qualification in Electrical Engineering If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25767 We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Cadent Gas Capital Delivery Project Cadent Gas, the UK's largest gas distribution network, operates a multibillion-pound capital delivery portfolio that oversees complex infrastructure upgrades, safety-critical network interventions, and the decarbonization of the UK's gas grid. Under its overarching Capital Delivery function, the company manages multiple large-scale construction programs and partnership Company : Cadent Gas Role: Project Supervisor (PM) Pay : Up to £475 per day (OUTSIDE OF IR35) Hours per week : 37 Duration: 12-18 months Start date : ASAP. Location: Various UK sites 80%/WFH 20% (All travel/hotels etc paid for) Types of Projects: Secure edge installations Electrical &Instrumentation kiosk upgrades RTU virtualisation programme Security upgrade work Responsibilities The Project Supervisor is responsible for overseeing the safe and compliant delivery of capital investment projects across the network. The role manages projects from initiation through to close-out, ensuring delivery aligns with business targets, budgets and regulatory standards. Solving skills will help deliver critical infrastructure that supports millions of customers Leading a small team and contractors, developing business cases, coordinating with internal and external stakeholders, and ensuring projects are delivered on time, within scope, and to required safety and quality standards. Monitoring spend, ensuring compliance with governance processes (e.g. SCO, CDM), and undertaking site oversight, audits, and inspections. Experience required: Proven experience in engineering or infrastructure project delivery (ideally within the gas sector), with strong knowledge of contract management, health & safety regulations, and risk management. 3-5 years' relevant experience, alongside an HNC/NVQ (or equivalent) in a related discipline, and a solid understanding of engineering standards and operational processes A background in either OR E&I, Security enhancements/upgrades/Gas sector. Desirable IOSH SMSTS Awareness of CDM Regulations 2015 What this role will bring to your career and progression Project Ownership - Lead end-to-end delivery of capital projects valued between £5m and £25m. Safety Leadership - Champion a proactive safety culture across all project phases. Stakeholder Engagement - Build strong relationships with internal teams, contractors, and community stakeholders. Technical Challenge - Manage complex engineering interfaces and ensure compliance with industry standards. Professional Growth - Develop your skills in a dynamic, high-responsibility environment. To be considered for this role, please forward an up-to-date CV.

Mechanical Maintenance Engineer Location: Lakenheath, Suffolk Salary: 55,000 Shifts: Monday to Friday Days The Role: We are seeking an experienced Mechanical Maintenance Engineer to carry out routine checks and emergency fixes to keeping our kit running safely. You'll stay on top of the maintenance plan, step in quickly when breakdowns happen, and work with supervisors to keep everything running smoothly. As part of a team, the role involves a blend of PPM and Reactive duties, with experience of conveyors, and heavy plant machinery very advantageous. Key Responsibilities as a Mechanical Maintenance Engineer: Attend breakdowns, diagnose faults, and carry out effective repairs. Perform planned and preventative maintenance across production and utilities. Ensure full compliance with Health, Safety, Environmental and Quality standards. Support shutdowns Requirements as a Mechanical Maintenance Engineer: Mechanical engineering experience is essential Electrical experience would be an added bonus but not essential A team player with a can-do attitude Someone who is quick to diagnose problems and can work calm under pressure Forklift license desirable Benefits as a Mechanical Maintenance Engineer: Life assurance Exclusive discounts at major retailers, restaurants, holidays and much more Generous staff discounts for you and your family Award-winning training and development, with fantastic career prospects Wide range of wellbeing support for you and your family (Employee Assistance Programme) Cycle to Work Scheme Please apply for this Mechanical maintenance Engineer position if you are interested.

Electrical Project Engineer East Midlands Industrial Installations: Food & Beverage manufacturers, Distribution Centres and Warehouses. Annual Earnings : £50,000-£70,000 P/A Benefit package : High earning role with £20k-£30k worth of overtime pay, Brand new company van fully expensed, State of the Art office, 25 Days Holiday + 8 Bank Holidays, Prospects to be promoted to Project Manager, laptop, Ipad, mobile phone, 8% Pension, Annual performance reviews, usual benefits such as free refreshments, designated parking, air conditioned office, premium hotel rooms + £20 meal allowance when out of town. The Business: Our client is a leading systems integrator within the Electro-Mechanical Automation Field, specialising in Electrical Installations within the Food & Beverages, Distribution and Automotive sectors. Established for over 25 years and now an investment backed business with a welcoming team atmosphere, the company prides themselves on their ability to deliver high quality electrical products to their customers including key industry players. Their services include Control Panel Design & Manufacturer, Switchgear, Electro-Mechanical Automation (Production line machinery), Installations & Commissioning, PLC wiring and maintenance contracts aswell as Testing & Inspection services. The majority of their customers have been with them for over 20 years which says a lot about the quality of their work and professional service. Offering an enjoyable working environment with like minded electrical engineers, they reward their staff and will invest in formal training qualifications such as Siemens TIA Portal Programming courses, Eplan Pro Panel (3D) design and Prince 2, helping you progress through the company. The Role : Electrical Project Engineer Key role in ensuring the accuracy and success of electrical installation projects across the East Midlands for customers ranging in size within the Food & Beverages and Distribution Centre industries. Overseeing lifecycle projects including: Specifying bill of materials, site surveys, quoting and estimating, overseeing the design and creation of schematic drawings, co-ordinating installation with client liaison throughout the project to successful handover. Co-ordinating with the Project Manager, Design Team, Lead Electrician and the customer providing progress updates. Ensuring the installation is completed with a focus on quality and efficiency. Examples of projects include: MCC's Installations, PLC Integration, Control Circuits, Safety Systems, Three Phase Distribution Boards, Control Panels, Switchgear, Controls & Automation, Power & Lighting, Conveyor and machinery installations. Entry Requirements: 5-10 Years minimum experience as an Industrial Electrician. 2 Years as an Lead Electrician, Electrical Supervisor or Electrical Chargehand. Approved Electrician with a recognised apprenticeship, C&G 2391/2395 Test & Inspection, Level 3 qualification in Electrical Installation, JIB/ECS Gold Card, AM2 and 18th Edition. About Auxtronic Auxtronic is a leading recruitment specialist that partners with blue chip manufacturers and highly technical systems integrators within the fields of engineering and automation. The industries we are most connected to include Food & Beverages, Distribution, Automotive, Pharmaceutical, Aggregates and Robotics across the UK & Europe. We welcome the opportunity to discuss exciting career prospects with new and existing clients in the fields of electrical and mechanical engineering, contact our team of specialists to discuss your next challenge. Auxtronic is a third party employment consultant on behalf of our longstanding client and is a committed equal opportunities employer, encouraging people from all walks of life to trust us with their career advances. We encourage you to make contact with us for more information on our opportunities, services, testimonials and policies either through direct correspondence or via our website and LinkedIn page.

We are looking for an experienced and driven Mechanical & Electrical (M&E) Operations Manager to lead the delivery of our housing repairs and maintenance services across gas, plumbing, and electrical disciplines.This is an exciting leadership opportunity for a skilled M&E professional with strong operational management experience, a passion for service excellence, and the ability to lead high-performing teams in a fast-paced environment.You will play a vital role in ensuring our housing stock is maintained to the highest standards-keeping residents safe, comfortable, and supported. About the Role Reporting to the Assistant Repairs & Maintenance Manager, you will lead operational teams responsible for: Gas, plumbing, and electrical repairs Reactive maintenance works Planned maintenance programmes External contracts and subcontractor performance Health & safety compliance across all operations You'll manage supervisors, trade operatives, contractors, apprentices, and support staff while ensuring excellent service delivery, budget control, regulatory compliance, and continuous improvement. Key Responsibilities As M&E Operations Manager, you will: Lead and manage a customer-focused repairs and maintenance service Drive performance through KPIs, service reviews, and quality assurance inspections Ensure compliance with housing, building, and health & safety legislation including CDM regulations Manage subcontractor relationships and service standards Monitor budgets, expenditure, and financial forecasting Improve productivity, resource allocation, and operational efficiency Support recruitment, performance management, training, and employee development Handle escalated complaints, FOI requests, councillor and MP enquiries Produce reports and briefing papers for senior leadership and elected members Contribute to service planning, innovation, and business transformation Participate in an out-of-hours escalation rota Morgan Hunt is a multi-award-winning recruitment business for interim, contract and temporary recruitment and acts as an Employment Agency in relation to permanent vacancies. Morgan Hunt is an equal opportunities employer. Job suitability is assessed on merit in accordance with the individual's skills, qualifications and abilities to perform the relevant duties required in a particular role.

Booth Welsh has a perfect opportunity for an E & I Supervisor to join our team based in North Ayrshire! This would be an excellent role for someone with electrical supervisory experience and a background of working in heavy industrial settings. Long term work with competitive rates available. Role responsibilities Responsible for accepting permits and reporting delays Managing a team of Electricians and work scopes Review quality levels and ensure these are maintained Supervision of the following activities: - Installation of cable containment (Ladder Rach and Cable Tray) from drawings - Mounting of new junction boxes - Installation of cabling to new IS instrument - installation of power cables to sypply new mototrs - Installation of small power and lighting circuits Carry out glanding terminating of all cabling Carry out inspectations and testing Role requirements Supervisory experience (Essential) Valid ECS card (Essential) Capability to manage schedules Good knowledge of Health & Safety IT literacy Approved Apprenticeship (Essential) Valid Safety Passport (Essential) Valid CSCS card (Essential) 17th (Essential / 18th Edition preferred) SSSTS (Essential) City and Guilds 2391/94/95 (Preferred) CompEx (Preferred) IPAF PASMA

Commercial Electrician 50,000- 55,000 + Plenty of Overtime + Company Van + Training & Progression + Private Healthcare+ Pension + Holiday + Benefits London based - Willing to travel nationwide Excellent opportunity for a Commercial Electrician to join a growing company working on exciting projects. This role offers a completive salary, overtime and continuous workload. Are you a commercial electrician looking exciting workload? Do you want plenty of overtime to enable you to dramatically increase your earning potential, alongside additional training to open further career prospects? This well-established contractor work on Groundwater projects within the construction secto, they are going through exciting growth and pride themselves on their staff development and training. They are now looking for a Site Electrician to oversee the installation, testing and incepting. As the department continues to grow, there is a clearly defined pathway for progression into senior or supervisory roles. The company actively supports further training and development, making this an excellent long-term career move for an ambitious electrician. This position would suit a hardworking Commercial Electrician seeking stable, local work, strong earning potential through uncapped overtime, and the chance to develop professionally within a growing team. The Role: Electrical installation on commercial projects across London Working on groundwater projects Producing electrical certification and supporting testing and compliance Working closely with clients, site teams, and project managers to deliver high standards The Person: Proven experience as a Commercial Installation Electrician 18th Edition and NVQ Level 3 (or equivalent) 2391 Test & Inspection (or equivalent) CSCS Gold Card Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Zoe Cann at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Electrician Inverness, Scotland We are now looking for additional Electricians to join our team in Inverness and surrounding areas. Projects will be based across the North of Scotland. Key Responsibilities: Install, maintain, and repair electrical systems and equipment in commercial properties. Conduct thorough inspections and testing of electrical installations to ensure compliance with the latest IET Wiring Regulations (BS 7671) Ensure compliance with relevant codes, legislation and procedures. Carry out tasks within agreed time frames. Diagnose and troubleshoot faults, providing effective solutions to minimise downtime. Ensure all work is carried out in accordance with health and safety regulations and company policies. Provide excellent customer service and communication to clients and team members Skills and Experiences: SVQ/NVQ Level 3 in Electrical Installation or equivalent. SSSTS or SMSTS for supervisory roles. First Aid at work (desirable, can be provided). City & Guilds 2391 (Inspection and Testing) or equivalent qualification preferred. Driving license (preferred for most roles). IPAF & PASMA (desirable, can be provided). What We Offer Stable, long term work on a variety of commercial projects Competitive rate / salary 34 days holiday Access to our Flex Benefits Portal Company pension scheme Supportive management and team focused culture Opportunities for progression within a growing business About Us We are MARCH . The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences. We believe diverse thinking strengthens engineering, and we welcome applications from all backgrounds. If you need any adjustments during the recruitment process, just let the team know.

Lead Test Engineer Location: Birmingham Salary: Negotiable Role Overview McGeoch Technology Ltd is seeking an experienced and proactive Lead Test Engineer to lead all product and system testing activities within our Birmingham manufacturing facility. The successful candidate will be responsible for managing and executing testing activities across a diverse range of products, ensuring compliance with customer specifications, quality standards, and regulatory requirements. The Lead Test Engineer will provide technical leadership for the test function, overseeing test planning, test procedures, fault diagnosis, and continuous improvement initiatives. The role will involve close collaboration with Engineering, Production, Quality, external test houses, and customers to ensure products are delivered safely, reliably, and to the highest standards. Key Responsibilities Lead and manage all product and system testing activities across the manufacturing facility. Develop, implement, and continuously improve test strategies, procedures, and processes. Plan, coordinate, and prioritise testing activities to support production schedules and customer delivery requirements. Provide technical leadership and support to production and assembly personnel during testing and fault-finding activities. Perform and oversee functional, electrical, environmental, and system testing on company products and assemblies. Ensure all testing is conducted safely and in accordance with company procedures, customer specifications, and quality standards. Interpret engineering drawings, schematics, wiring diagrams, specifications, and test requirements. Diagnose faults, identify root causes, and implement effective corrective actions. Liaise with external test houses to schedule qualification, certification, and compliance testing activities. Lead Factory Acceptance Tests (FAT) and Customer Witness Tests for company products and systems. Act as the primary technical point of contact for all test-related matters. Ensure all test equipment is maintained, calibrated, and suitable for use. Produce and review test reports, non-conformance reports, and technical documentation. Support product validation, commissioning, and customer support activities where required. Drive continuous improvement initiatives to enhance product quality, reliability, and manufacturing efficiency in conjunction with the continuous improvement Manager. Ensure compliance with applicable industry standards, company quality procedures, and Health & Safety requirements. Essential Skills and Experience Degree, HNC/HND, or equivalent qualification in Electrical, Electronic, Mechanical, or Manufacturing Engineering. Significant experience in a manufacturing test engineering environment. Proven experience leading testing activities within a regulated industry. Strong electrical and electronic fault-finding capability. Ability to interpret complex engineering drawings and technical documentation. Experience using a wide range of electrical and electronic test equipment. Excellent problem-solving, analytical, and organisational skills. Strong communication skills with the ability to engage effectively with customers and stakeholders. Experience leading Factory Acceptance Tests and customer witness activities. Essential Technical Knowledge of low voltage switchgear, inverter, drives and VFD s. Trained to work on 440V 3phase power systems and the ability to run motor or simulated load tests including electrical power connections to inverters and VSD s. Familiar with the equipment and test procedures for carrying out but not limited to: Dielectric Withstand Voltage (DWV) testing (HiPOT to 4KV) Insulation test Low impedance Functional performance tests with bespoke test equipment for which protocols for communication (Profinet) and process are required. Familiar with an array of sensors (temperature, pressure, flow, strain gauges, etc) for monitoring purposes and the logging of data of through High-speed capture devices. Worked to Aerospace, Defence and Marine Standards and familiar with their test methods and requirements. Experience on Low Voltage (LV) switchgear & control gear assemblies, to BS EN 61439 and also a working knowledge of 18th Edition IET electrical standards and IEC standards is desirable. Desirable Skills and Experience Experience within Defence, Marine, Aerospace, Rail, Oil & Gas, or ATEX-regulated industries. Knowledge of ATEX/IECEx standards and hazardous area equipment. Familiarity with ISO 9001 and quality management systems. Experience managing external certification and test organisations. Understanding of CE/UKCA product compliance requirements. Previous supervisory or team leadership experience. Security Requirements Due to the nature of the products manufactured and associated security requirements, applications will only be considered from British Nationals. Dual nationality applications cannot be accepted. Equal Opportunities McGeoch Technology Ltd is an equal opportunities employer committed to creating an inclusive workplace. We value diversity and welcome applications from all suitably qualified individuals who meet the nationality requirements for this role. To Apply If you feel you are a suitable candidate and would like to work for McGeoch Technology Ltd, please do not hesitate to apply.

Electrical Supervisor Altera Recruitment Group is working with a forward-thinking, multi-disciplinary engineering services provider delivering mechanical, electrical, instrumentation and control system solutions across sectors including water, utilities, defence and industrial environments. Due to continued growth, they are now looking to appoint an Electrical Supervisor to lead and coordinate electrical works on site, ensuring projects are delivered safely, to specification and to a high standard. This is a hands-on supervisory role offering exposure to varied electrical engineering projects, ongoing professional development and long-term progression within a growing organisation. Key Responsibilities for the Electrical Supervisor: Lead, allocate and oversee daily tasks for operatives and apprentices Install containment systems, cabling and electrical equipment in line with BS 7671 and project drawings Carry out testing, fault finding and repair work using approved tools and safe working practices Ensure all site activity complies with Health, Safety, Quality and Environmental procedures Support commissioning activities, QA documentation, risk assessments, permits and toolbox talks What We're Looking For: Time served and fully qualified in an electrical trade, with City & Guilds or equivalent Minimum 3 years post qualification experience Strong communication, leadership and site supervision skills Valid UK driving licence Knowledge of HSEQ disciplines, safe systems of work and site compliance requirements What You'll Get: 21 to 25 per hour depending on experience Ongoing training and professional development opportunities Exposure to varied projects across water, utilities, defence and industrial sectors Collaborative and supportive working culture Long-term career progression within a growing organisation If you are interested in this opportunity, please apply with your most up-to-date CV or get in touch with Daniel Pope.

An excellent opportunity has arisen for a Maintenance Supervisor/Senior Plant Engineer to join this leading UK manufacturing company based at its Birmingham site near north of the City Centre. THE ROLE Based at this modern plant in Birmingham it is easily accesible from the Tamworth, Lichfield, Sutton Coldfield, Birmingham, Walsall and surrounding areas. The role of the Maintenance Supervisor is to manage a team of upto 5 technicians to ensure daily maintenance targets are met. Responsibilities include: Maintenance planning (TPM/PPM) Supervision Workload management Health and Safety OEE Improvements Maintenance Support THE PERSON In order to succeed in the role of Maintenance Supervisor you will need to have a mechanical or electrical background (Ideally multiskilled), as well as strong maintenance planning skills. Ideally you will have excellent people skills, with experience in either a senior maintenance role, Maintenance Team Leader, Manager etc. Any manufacturing or production background would be ideal. THE PACKAGE 48,000- 52,000 Basic Pension Overtime Day role Life Assurance

Engineering Team Leader Job Title: Engineering Team Leader Location: Tottenham Salary: £55,000 Shift: M-F Days Job Role of the Engineering Team Leader An Excellent opportunity has become available for a experienced and qualified Engineering Team Leader to work for a growing FMCG Manufacturing company. The Engineering Team Leader will be involved in managing a team of 2 engineers on whilst also be involved in the hands on maintenance and running of machinery. The Engineering Team Leader will be working in a automated factory with lots of opportunities to learn and develop skills. This is a Hands on role and you will be involved in both electrical and mechanical maintenance. Sector - Factory Maintenance Non-Negotiable Requirements of the Engineering Team Leader Engineering Qualification Experience in a Leadership or Supervisory role Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory. Requirements for the Engineering Team Leader Experience in managing a team of engineers Recognised engineering qualification. Experience working within a manufacturing environment. Good with Training and development Desirable Requirements for the Engineering Team Leader Experience working as Maintenance Team Leader in the UK. The Engineering Team Leader will benefit from: Working for a market-leading manufacturing business. Company benefits package including pension, life insurance, and gym access. Training and development opportunities. If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert. For further details contact Waheed Anjum at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Lead Electrician East Midlands Industrial Installations: Food & Beverage manufacturers, Distribution Centres and Warehouses. Annual Earnings : 48,600- 64,000+ P/A Benefit package : High earning role with 10k- 20k+ worth of overtime pay, Brand new company van fully expensed, State of the Art office, 25 Days Holiday + 8 Bank Holidays, Prospects to be promoted to Project Roles, laptop, Ipad, mobile phone, 8% Pension, Annual performance reviews, usual benefits such as free refreshments, designated parking, air conditioned office, premium hotel rooms + 20 meal allowance when out of town. The Business: Our client is a leading systems integrator within the Electro-Mechanical Automation Field, specialising in Electrical Installations within the Food & Beverages, Distribution and Automotive sectors. Established for over 25 years and now an investment backed business with a welcoming team atmosphere, the company prides themselves on their ability to deliver high quality electrical products to their customers including key industry players. Their services include Control Panel Design & Manufacturer, Switchgear, Electro-Mechanical Automation (Production line machinery), Installations & Commissioning, PLC wiring and maintenance contracts aswell as Testing & Inspection services. The majority of their customers have been with them for over 20 years which says a lot about the quality of their work and professional service. Offering an enjoyable working environment with like minded electrical engineers, they reward their staff and will invest in formal training qualifications such as Siemens TIA Portal Programming courses, Eplan Pro Panel (3D) design and Prince 2, helping you progress through the company. The Role : Lead Electrician Electrical Supervisor running and co-ordinating electrical installation jobs within industrial environments, allocating work loads, supervising and ensuring projects are completed to standard. Completing electrical projects up to the value of 500k, ensuring the job is reflecting the electrical schematics/drawings and successfully commissioned. Projects can include: Automation & Control, Control Panel installations, Conveyor and machinery installations and LV equipment going in. Role involves customer management, taking briefs and providing quotations for projects and then overseeing the installation and any maintenance. Hands on work occasionally, helping with wiring during key project times or during absences to ensure the job is completed. Management work including toolbox talks, work allocation, 121's, training and providing feedback to the on site Project Managers and the customer. Entry Requirements: 5-10 Years minimum experience as an Industrial Electrician. Approved Electrician with a recognised apprenticeship, C&G 2391/2395 Test & Inspection, Level 3 qualification in Electrical Installation, JIB/ECS Gold Card, AM2 and 18th Edition. About Auxtronic Auxtronic is a leading recruitment specialist that partners with blue chip manufacturers and highly technical systems integrators within the fields of engineering and automation. The industries we are most connected to include Food & Beverages, Distribution, Automotive, Pharmaceutical, Aggregates and Robotics across the UK & Europe. We welcome the opportunity to discuss exciting career prospects with new and existing clients in the fields of electrical and mechanical engineering, contact our team of specialists to discuss your next challenge. Auxtronic is a third party employment consultant on behalf of our longstanding client and is a committed equal opportunities employer, encouraging people from all walks of life to trust us with their career advances. We encourage you to make contact with us for more information on our opportunities, services, testimonials and policies either through direct correspondence or via our website and LinkedIn page.

Electronics Repair Technician - Medical Devices Location: Reading / Theale Contract: Permanent Salary: Competitive + Benefits Are you an experienced Electronics Repair Technician with a passion for fault-finding, component-level repair, and solving complex technical challenges? Our client is seeking a skilled engineer to join their specialist workshop, repairing and restoring high-value medical and electronic equipment used within healthcare environments across the UK. This is an opportunity to work with cutting-edge diagnostic technology, develop advanced repair techniques, and become part of a highly skilled engineering team. Reporting to the Workshop Supervisor, you'll be responsible for diagnosing, repairing, testing, and calibrating a wide range of sophisticated electronic and medical devices to component level. Working in a dedicated electronics laboratory, you'll use your technical expertise to identify faults, carry out complex repairs, develop innovative repair methods, and help maximise the lifespan of critical healthcare equipment. This is a hands-on role where no two repairs are the same, offering genuine variety and the opportunity to work with some of the most advanced medical technologies available. What You'll Be Working On You'll support the repair and maintenance of equipment including: MRI systems and RF coils Ultrasound probes and imaging systems CT and X-ray equipment RF Power Amplifiers (RFPAs) Power Supply Units (PSUs) PCB assemblies and complex electronic modules Analogue, digital and RF electronic systems What You'll Be Doing Diagnose and repair complex electronic and medical devices to component level Carry out fault finding using electronic test equipment Perform calibration, testing and quality assurance activities Interpret schematics, technical drawings and manufacturer documentation Reverse engineer circuits where technical information is unavailable Source replacement components and repair solutions Produce accurate repair reports and technical documentation Develop and improve repair procedures and methodologies Ensure compliance with ISO standards, regulatory requirements and health & safety procedures Work collaboratively with engineering, operations and customer support teams Prioritise workloads to meet production and turnaround targets The person: You'll be an experienced electronics repair engineer who enjoys investigating faults, solving complex technical problems, and working to exceptionally high-quality standards. You'll be comfortable working independently while contributing to a collaborative engineering team and continuously improving repair processes. Essential Skills & Experience Qualification in Electronics or Electrical Engineering (HNC, HND, Degree or equivalent training) Minimum 2 years' experience in electronics/medical device repair Strong component-level fault-finding and repair experience Ability to read electronic schematics and technical drawings Experience using laboratory test equipment including: Oscilloscopes Multimeters Signal generators Bench power supplies Excellent analytical and troubleshooting skills Strong attention to detail and quality standards Good communication and teamwork skills A proactive, inquisitive approach to problem solving Desirable Experience We're particularly interested in candidates with experience in one or more of the following: MRI RF coil repair Ultrasound probe repair RF systems and power amplifiers PCB assembly and component-level repair (SMT & through-hole) Diagnostic imaging equipment Reverse engineering Medical device manufacturing or repair Mechanical workshop experience Computer-Aided Design (CAD) Working within regulated industries such as medical devices, aerospace or defence This is an exciting opportunity to work with industry-leading medical technology in a specialist engineering environment where your technical skills will directly support healthcare providers and ultimately improve patient care. You'll join a knowledgeable and supportive team that values innovation, technical excellence and continuous development, with opportunities to expand your expertise across a broad range of advanced medical imaging and electronic systems. Location & Travel Based at our Reading / Theale workshop Occasional travel may be required Enhanced DBS check required Please feel free to contact as regarding salary as it is not advertised.

Electrical Site Manager Bath 50,000 - 65,000 + Travel Allowance + Bonus + Pension + Holidays + Stay Aways Expensed + Private Medical Insurance + Package + Technical Progression + 'Immediate Start' Join a dynamic, fast-growing main contractor and elevate your career! This is an exciting opportunity for an experienced Electrical Supervisor to lead and deliver a high-value, cutting-edge technical construction project near Bath. With a diverse project portfolio spanning manufacturing and data centre construction, this role offers invaluable experience and career development. As an Electrical Supervisor, you'll oversee all electrical works on site, ensuring top-quality delivery within timelines and budgets. This is your chance to take ownership of a prestigious project, work closely with senior leadership, and position yourself for future progression. Your Role As A Supervisor Will Include: Lead and manage MEP site teams to ensure the successful delivery of all MEP aspects within budget and timeframe. Ensure health & safety, quality, and compliance standards are maintained at all times. Coordinate with the construction team, subcontractors, and key stakeholders for seamless project execution. As A Supervisor You Will Have: A strong background as an Industrial Electrician/ Supervisor within industrial, manufacturing, data centre or similar environments. Proven experience delivering large-scale, complex MEP/Electrical packages. Based anywhere within a commutable distance to Bath or willing to stay away. If you are interested in this role, please contact Lily on (phone number removed).

Location: Cambridge (CB22) Duration: Permanent Hours: 8:45am until 5pm (Monday to Friday) Salary: circa 60,000 Job Reference: 35997 Polytec are looking for a Senior Automation Engineer from an engineering background for our client based in south Cambridgeshire. Responsibilities: You will be producing leading edge machinery for a high technology global market. Requirements: Electrical / Physics Degree level qualification, considerable experience in a relevant field may also be considered Exposure to test, measurement and PLC programming Programming and design experience on PLCs (Programmable Logic Controllers) and SCADA Motion Control and PID Controllers SCADA (Supervisory Control and Data Acquisition) systems Visual basic programming experience Experience of Rockwell/Allen Bradley control systems would be beneficial Please contact us as soon as possible for more details or apply below!

Recruit4Staff are proud to be representing their client, a leading manufacturer in their search for an Electrical Fitter to work in their leading facility in Stoke on Trent. For the successful Electrical Fitters our client is offering: Competitive salary paying up to £35,753.64 Permanent positions within a growing business Monday to Friday 7:30am-5pm with a 12:30pm finish on Fridays Regular overtime opportunities available to boost overall earning potential! (Paid at time and a half & Double Time) Bonus paid at Christmas depending on company performance Extra days annual leave at 5 years service 2 days extra annual leave at 10 years service Opportunity to join a rapidly expanding business The Role - Electrical Fitter: Installing electrical systems into a variety of Commercial Vehicles/HGV's Reading from electrical drawings Working on different electrical systems Wiring Ability to achieve results in a busy working environment Constantly seeking ways to improve productivity whilst trying to reduce costs Holding meetings with the team and helping them to improve on performance levels What our client is looking for in an Electrical Fitter: Ideally have experience working in a Body Building/Coach Building environment Have a background working with vehicles such as automotive/commercial, construction plant, truck body work or fork lift trucks Versatile, flexible and self-motivated Able to read electrical diagrams Strong communication skills Possess Senior/Team Leader Auto Electrics experience ideally Key Skills or Similar Job Titles: Auto Electrician, Looms, Electrical fitting, Testing, Fault Finding, Vehicle Electrics, Team Leader, Supervisor, Vehicle Electrician Commutable from: Wolverhampton, Telford, Cannock, Stafford, Dudley, West Bromwich, Walsall, West Midlands For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff who are operating as a recruitment agency, agent, agencies, employment agency or employment business. EWV TelfINde1

Electrical Administrator (Rail) Maximo Experience Essential Location: West London Job Type: 3-6 months Salary: £180 - £220 LTD - depending on experience Monday - Friday - 8.30am - 17.30 We are looking for an experienced Electrical Administrator to support the delivery of electrical maintenance and project activities across the rail network. The successful candidate will be required to triage and gather information on open Emergency Maintenance, Planned Maintenance and Corrective Maintenance and close where required. Also Project documentation, with a strong focus on using the Maximo asset management system. This is an excellent opportunity for an organised and detail-oriented individual, with strong data entry experience and as well as triage and have a good understanding of electrical maintenance administration would be a advantage. Key Responsibilities • To triage and gather information on open Emergency Maintenance, Planned Maintenance and Corrective Maintenance and close where required legacy works that have been completed and ascertain remaining on Maximo. • Administer and manage work orders using the IBM Maximo Asset Management System • Raise, update, and close maintenance work orders within agreed timescales. • Maintain accurate electrical asset records, maintenance history, and compliance documentation. • Support the planning and scheduling of electrical maintenance activities. • Ensure all documentation is completed and stored in line with client and Network Rail requirements. • Produce reports from Maximo to monitor work progress, outstanding tasks, and KPIs. • Assist with the management of inspection, testing, and certification records. • Coordinate with engineers, supervisors, planners, and project managers to ensure accurate data capture. • Process purchase orders, material requests, and supplier documentation where required. • Support audits by maintaining accurate and up-to-date records. • Provide general administrative support to the Electrical Delivery Team. Requirements • Experience supporting electrical maintenance or engineering teams. • Previous administration experience within the rail industry would be ideal but not essential. • Electrical background would be an advantage for this role. • Proven experience using IBM Maximo for work order and asset management. • Strong knowledge of Microsoft Office, particularly Excel, Word, and Outlook. • Excellent organisational and time management skills. • High level of accuracy and attention to detail. • Ability to work under pressure and manage multiple priorities. • Knowledge of Network Rail standards and compliance processes would be an advantage. • Sentinel sponsorship but not essential. .

Job Title: Electrician (Highways / Rail Experience) Location: Bristol Salary: Up to £50k base salary (depending on experience)This is an exciting opportunity to join a well-established engineering services provider with a strong reputation for quality, safety, and reliability. As the business continues to grow, we are seeking skilled and motivated Electricians to join the team. If you're passionate about delivering high-quality technical solutions in the Highways sector, we want to hear from you! The Role You'll be responsible for electrical installation, maintenance, and testing on a variety of projects. This is a hands-on role requiring technical expertise, a proactive mindset, and a strong commitment to safety and quality. Key Responsibilities: Carry out electrical installations, maintenance, and repairs in accordance with BS7671 (18th Edition) and company procedures. Perform cable installation, jointing, terminations, testing, and fault finding. Conduct inspection and testing of new and existing installations. Ensure compliance with Electrical Safe Systems of Work (ESSW) and all safety regulations. Collaborate effectively with supervisors, engineers, and field teams to plan and deliver works. Complete accurate job records, test certificates, and other documentation. Demonstrate flexibility in working hours and willingness to travel across the UK when required. About You: Background in Railways or Highways Fully qualified Electrician (NVQ Level 3 or equivalent) 5+ years' experience 18th Edition IET Wiring Regulations (BS7671:2018) certification ECS or CSCS card Full UK driving licence Strong attention to detail and commitment to safe working practices What We Offer: Competitive salary (based on experience) 33% salary uplift for nights Overtime and weekend work opportunities Company vehicle and fuel card 25 days holiday + bank holidays Employer pension contributions Funded training and career development opportunities Subsidised private healthcare Please note we cannot offer sponsorship for this opportunity.If interested please send over an updated CV.