34 jobs found

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

MET Technician Thurrock Up to 52,000 OTE 65,000 + New enhanced bonus scheme paid on both personal and site performance Monday to Friday only Access up to 30% of your wages in advance each month 29 days annual leave, increasing with service Genuine career progression within a growing business Enhanced sick pay Excellent company benefits package For more information, call Rochelle on (phone number removed) MET Technician / Strip & Fit An excellent opportunity has arisen for an experienced MET Technician to join a modern, well-equipped accident repair centre in Thurrock. This business is known for its high-quality repairs, strong team culture, and commitment to manufacturer-approved repair methods. If you take pride in delivering exceptional workmanship and want to work in a professional environment where quality comes first, we'd like to hear from you. Key Responsibilities Remove and refit mechanical, electrical, and trim components Strip and rebuild vehicles to manufacturer standards Dismantle accident-damaged vehicles for repair Carry out diagnostics, inspections, and fault-finding Complete steering, suspension, and wheel alignment work Order and fit replacement parts Reassemble vehicles to pre-accident condition Ensure all repairs meet quality, safety, and manufacturer requirements Complete work efficiently within agreed repair times Requirements Previous experience as a MET Technician, Strip Fitter, or Bodyshop Mechanic Strong mechanical, electrical, and diagnostic skills Ability to follow technical repair methods accurately ATA, NVQ Level 3, or IMI Level 3 qualification advantageous Positive attitude and commitment to high-quality repairs How to Apply To be considered, contact Rochelle at Clear Automotive Recruitment Solutions on (phone number removed) or send your CV for an immediate interview. Clear Automotive Recruitment Solutions recruits nationally for Panel Beaters, MET Technicians, Vehicle Paint Sprayers, Vehicle Preppers, SMART Repairers, VDAs, Bodyshop Estimators, Workshop Controllers, Bodyshop Managers, Production Managers, and other automotive repair professionals. IND123

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Production Technician (Sprayer) Location: Rochester Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and youll be part of something bigger. As a valued member of our global colleague network, youll bring your unique skills and perspectives to help pioneer progress and protect what matters most click apply for full job details

Job Title: Production Technician (Sprayer) Location: Rochester - Onsite Salary: Circa £32,773 dependent on experience Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: In this role, you prepare surfaces for coating by removing grease, dirt, and contaminants to ensure proper adhesion of spray paint or conformal coatings. You mix paints and chemicals to meet customer specifications, following correct methods and safety regulations. Before work begins, you set up spray equipment, materials, and purpose built spray booths, then operate the spraying systems safely and accurately to achieve high quality finishes on manufactured products. You carry out quality checks using appropriate tools and techniques, addressing any defects through touch up work. The role also includes cleaning and maintaining equipment after use and upholding housekeeping standards to keep the paint and conformal coating areas clean, safe, and compliant for all personnel. Core duties: You will have experience in paint spraying and /or Conformal coating environments You will have the ability to closely follow written instructions and keep records for audit purposes. You will be able to follow strict safety requirements associated with the storage and use of hazardous materials and the disposal of hazardous material waste You will also be able to wear protective clothing including air-fed masks. Please note that protective clothing, masks, gloves and goggles must be worn when handling hazardous materials and spraying The Team: The team is responsible for spray painting Head Up Display (HUD) units, Flight Control Sticks, Fast Jet Throttle controls and other similar type -high technology products. On the conformal coating side, you will be spraying a humiseal coating onto printed circuit boards that are eventually assembled into the aforementioned products. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 17th July 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.