Salary up to 50,000 Depending on experience Location Wotton-under-Edge, Glos An opportunity has arisen within Renishaw's Manufacturing division for an experienced Test Development Engineer to join our Functional Test and Flying probe team. In this influential role, you will develop and deliver innovative manufacturing test solutions that support the successful introduction of Renishaw's cutting-edge products into production. Working closely with product development and manufacturing teams, you will drive improvements in product quality, test coverage, and manufacturing capability while helping define the future direction of electronics test within the business. Responsibilities Support the development, implementation, and support of manufacturing test solutions for new products and engineering changes. Design and deliver robust test systems by integrating hardware, software, databases, and production equipment. Collaborate with design teams to improve product testability, manufacturing capability, and test coverage through effective Design for Test (DfT) practices. Provide technical support for new product introduction activities, including fault investigation, root cause analysis, and corrective actions. Maintain and enhance test systems and equipment to ensure reliability, production readiness, and continuous improvement. Contribute to manufacturing test strategies, helping shape future test technologies, methodologies, and capabilities. Key requirements Degree qualified in a relevant engineering or scientific discipline, or HNC/HND with significant relevant industrial experience. Solid understanding of electronic circuit design, with the ability to interpret complex schematics and identify potential design or test challenges. Proven experience developing Functional Test and/or Flying Probe solutions within an electronics manufacturing environment. Experience with in-circuit, Flying Probe, Boundary Scan, and Functional Test methodologies. Strong understanding and application of Design for Test (DfT) principles. Experience investigating manufacturing issues and delivering effective root cause analysis. Experience developing and contributing to manufacturing test strategies. Desirable skills and experience Experience developing functional test or SPEA Flying probe solutions. Knowledge and practical experience of NI LabVIEW and TestStand. Understanding of Boundary Scan testing techniques. Software development experience using VB, C#, C++, Python, or SQL. Experience of automated test equipment (ATE). Electronics fault-finding to component level. Understanding of analogue and digital circuits. High level of PC literacy and familiarity with engineering software tools. Person specification An organised and proactive engineer with strong analytical and problem-solving skills. An effective communicator who can work collaboratively across multi-disciplinary teams. Confident presenting technical information and influencing stakeholders at all levels. A credible technical leader who drives high standards and leads by example. Passionate about continuous improvement and challenging established ways of working. Results-focused with a strong commitment to quality, delivery, and operational excellence. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. ( not available at all sites). We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 times annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, Health Cash Plan, the option to join BUPA Renishaw Health Trust and an Employee Assistance Programme for employees and family.
Jul 31, 2026
Full time
Salary up to 50,000 Depending on experience Location Wotton-under-Edge, Glos An opportunity has arisen within Renishaw's Manufacturing division for an experienced Test Development Engineer to join our Functional Test and Flying probe team. In this influential role, you will develop and deliver innovative manufacturing test solutions that support the successful introduction of Renishaw's cutting-edge products into production. Working closely with product development and manufacturing teams, you will drive improvements in product quality, test coverage, and manufacturing capability while helping define the future direction of electronics test within the business. Responsibilities Support the development, implementation, and support of manufacturing test solutions for new products and engineering changes. Design and deliver robust test systems by integrating hardware, software, databases, and production equipment. Collaborate with design teams to improve product testability, manufacturing capability, and test coverage through effective Design for Test (DfT) practices. Provide technical support for new product introduction activities, including fault investigation, root cause analysis, and corrective actions. Maintain and enhance test systems and equipment to ensure reliability, production readiness, and continuous improvement. Contribute to manufacturing test strategies, helping shape future test technologies, methodologies, and capabilities. Key requirements Degree qualified in a relevant engineering or scientific discipline, or HNC/HND with significant relevant industrial experience. Solid understanding of electronic circuit design, with the ability to interpret complex schematics and identify potential design or test challenges. Proven experience developing Functional Test and/or Flying Probe solutions within an electronics manufacturing environment. Experience with in-circuit, Flying Probe, Boundary Scan, and Functional Test methodologies. Strong understanding and application of Design for Test (DfT) principles. Experience investigating manufacturing issues and delivering effective root cause analysis. Experience developing and contributing to manufacturing test strategies. Desirable skills and experience Experience developing functional test or SPEA Flying probe solutions. Knowledge and practical experience of NI LabVIEW and TestStand. Understanding of Boundary Scan testing techniques. Software development experience using VB, C#, C++, Python, or SQL. Experience of automated test equipment (ATE). Electronics fault-finding to component level. Understanding of analogue and digital circuits. High level of PC literacy and familiarity with engineering software tools. Person specification An organised and proactive engineer with strong analytical and problem-solving skills. An effective communicator who can work collaboratively across multi-disciplinary teams. Confident presenting technical information and influencing stakeholders at all levels. A credible technical leader who drives high standards and leads by example. Passionate about continuous improvement and challenging established ways of working. Results-focused with a strong commitment to quality, delivery, and operational excellence. Benefits When you join Renishaw, we're committing to your future career. That's because we believe in developing our people's skills and promoting them internally. We also offer a benefits package that's highly desirable; including a 9% non-contributory pension, discretionary annual bonus, subsidised onsite restaurants and coffee shops, free parking, car sharing scheme and 24 hour fitness centres. ( not available at all sites). We also want to promote a healthy work-life balance as much as possible, so we have introduced a hybrid working policy which allows for a combination of home and office based working depending on the nature of your role. We also offer a variable working programme, 25 days holiday plus bank holidays, Life Assurance policy of 12 times annual salary, Cycle to Work scheme, enhanced maternity pay subject to qualifying criteria, Health Cash Plan, the option to join BUPA Renishaw Health Trust and an Employee Assistance Programme for employees and family.
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines. Requirements British Citizen eligible for UK Security clearance. Defence engineering experience of systems and product lifecycles from concept design, integration and test. Valid UK Driving License Beneficial Radar, Radio System, communications protocols systems and bid proposal knowledge. Naval Platform, Navigation equipment electronics EMC, ESD skills. This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.
Jul 31, 2026
Full time
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines. Requirements British Citizen eligible for UK Security clearance. Defence engineering experience of systems and product lifecycles from concept design, integration and test. Valid UK Driving License Beneficial Radar, Radio System, communications protocols systems and bid proposal knowledge. Naval Platform, Navigation equipment electronics EMC, ESD skills. This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems.
Principal Test Engineer Based in Stevenage Circa 64,000 Hybrid, 2 to 3 days on site You've spent years making sure things actually work before they're trusted with something that matters. Now you want to lead that thinking, not just execute someone else's test plan. This is a senior test engineering role inside a design team. You won't be testing what someone else designed after the fact, you'll be shaping testability into the design from the start, then owning the equipment, the coverage, and the trade-offs that follow. What you'll actually be doing You'll specify pass-out tests, in-service checks and BIT routines, and you'll make sure they're built into the product from the design stage rather than bolted on afterwards. You'll lead a small team of test architects, act as a senior voice within the test department, and work directly with the Chief Design Engineer on the cost versus coverage decisions that shape the whole programme. Day to day, that means: Owning complex test equipment specification and delivery, end-to-end Generating and managing lower-level test requirements for design teams, including test access, BIT coverage and timing, and factory test functionality Analysing and modelling systems to determine test coverage and generate diagnostic instructions Leading a team of test architects and providing functional leadership within the wider department Working closely with design and manufacturing teams to close testability gaps before they become problems What you'll need to bring Substantial experience in test equipment design, product testability, or electrical/electronic engineering Solid grounding in at least one of digital electronics and microprocessor systems, analogue electronics, electronics testing, or ATE/test equipment design Proven experience leading and influencing people, not just managing a task list Comfort gathering requirements, running projects, and managing relationships with senior stakeholders If you read that list and thought "yes, that's me", you're exactly who this is for. If you're still building toward it, this probably isn't the right fit yet, and that's fine. Worth knowing Circa 64,000 depending on experience Bonus up to 21% Pension up to 14% combined contribution Due to the nature of the work, this role requires British citizenship or dual UK nationality Not actively looking? No problem. If this sounds like a better version of what you're already doing, it's worth a quiet conversation, nothing more.
Jul 31, 2026
Full time
Principal Test Engineer Based in Stevenage Circa 64,000 Hybrid, 2 to 3 days on site You've spent years making sure things actually work before they're trusted with something that matters. Now you want to lead that thinking, not just execute someone else's test plan. This is a senior test engineering role inside a design team. You won't be testing what someone else designed after the fact, you'll be shaping testability into the design from the start, then owning the equipment, the coverage, and the trade-offs that follow. What you'll actually be doing You'll specify pass-out tests, in-service checks and BIT routines, and you'll make sure they're built into the product from the design stage rather than bolted on afterwards. You'll lead a small team of test architects, act as a senior voice within the test department, and work directly with the Chief Design Engineer on the cost versus coverage decisions that shape the whole programme. Day to day, that means: Owning complex test equipment specification and delivery, end-to-end Generating and managing lower-level test requirements for design teams, including test access, BIT coverage and timing, and factory test functionality Analysing and modelling systems to determine test coverage and generate diagnostic instructions Leading a team of test architects and providing functional leadership within the wider department Working closely with design and manufacturing teams to close testability gaps before they become problems What you'll need to bring Substantial experience in test equipment design, product testability, or electrical/electronic engineering Solid grounding in at least one of digital electronics and microprocessor systems, analogue electronics, electronics testing, or ATE/test equipment design Proven experience leading and influencing people, not just managing a task list Comfort gathering requirements, running projects, and managing relationships with senior stakeholders If you read that list and thought "yes, that's me", you're exactly who this is for. If you're still building toward it, this probably isn't the right fit yet, and that's fine. Worth knowing Circa 64,000 depending on experience Bonus up to 21% Pension up to 14% combined contribution Due to the nature of the work, this role requires British citizenship or dual UK nationality Not actively looking? No problem. If this sounds like a better version of what you're already doing, it's worth a quiet conversation, nothing more.
Product Cybersecurity & Firmware Engineer Nottingham area (Hybrid WFH) 60,000 - 70,000 KO2 is working with a well-established, global manufacturer of high-tech electronic products to appoint a Senior Product Cybersecurity & Firmware Engineer. This hands-on, senior role embeds cybersecurity and secure networking capability across a leading-edge product portfolio, sitting at the intersection of embedded engineering and product compliance. The Role You'll lead cybersecurity assessment and remediation while directly contributing to the design, development, and validation of secure, network-connected product features - working closely with firmware, hardware, test, compliance, and quality teams to keep products ahead of evolving regulatory requirements. Key Responsibilities Lead cybersecurity assessments: identifying risks, vulnerabilities, and remediations Design and implement secure, network-connected product functionality, including HTTPS/TLS and RFC-based networking Write, review, and maintain production code for cybersecurity and network features Support compliance with the Cyber Resilience Act, EN18031, and IEC 62443, including technical documentation Investigate and resolve vulnerabilities; support patching and secure update strategies (Desired) Provide technical leadership and best-practice guidance across engineering teams What We're Looking For Essential: 5+ years' embedded software/systems engineering, including production code delivery, in a relevant wireless or high-tech industry Experience with network-connected products and protocols (TCP/IP, HTTP/S) Hands-on secure communications/cybersecurity feature implementation Embedded C or C++ 11/14 RTOS experience (ThreadX, Azure RTOS, or FreeRTOS) Bare-metal development and low-level driver experience Familiarity with cybersecurity standards/frameworks (e.g. IEC 62443) Strong diagnostic, problem-solving, and communication skills Desirable: Awareness of the Cyber Resilience Act and connected-product regulations Experience supporting compliance, certification, or customer cybersecurity requests ARM Cortex-M / STM32 experience Exposure to SPI, I2C, I2S, UART, DMA Hardware test and debug experience Qualifications: Bachelor's degree in Electrical Engineering, Computer Science, or equivalent experience. Package: 60,000- 70,000 DOE 37.5 hrs/week Hybrid Well-resourced team delivering a genuinely leading-edge development programme. Get in touch with KO2 today with an up to date CV for a confidential conversation.
Jul 31, 2026
Full time
Product Cybersecurity & Firmware Engineer Nottingham area (Hybrid WFH) 60,000 - 70,000 KO2 is working with a well-established, global manufacturer of high-tech electronic products to appoint a Senior Product Cybersecurity & Firmware Engineer. This hands-on, senior role embeds cybersecurity and secure networking capability across a leading-edge product portfolio, sitting at the intersection of embedded engineering and product compliance. The Role You'll lead cybersecurity assessment and remediation while directly contributing to the design, development, and validation of secure, network-connected product features - working closely with firmware, hardware, test, compliance, and quality teams to keep products ahead of evolving regulatory requirements. Key Responsibilities Lead cybersecurity assessments: identifying risks, vulnerabilities, and remediations Design and implement secure, network-connected product functionality, including HTTPS/TLS and RFC-based networking Write, review, and maintain production code for cybersecurity and network features Support compliance with the Cyber Resilience Act, EN18031, and IEC 62443, including technical documentation Investigate and resolve vulnerabilities; support patching and secure update strategies (Desired) Provide technical leadership and best-practice guidance across engineering teams What We're Looking For Essential: 5+ years' embedded software/systems engineering, including production code delivery, in a relevant wireless or high-tech industry Experience with network-connected products and protocols (TCP/IP, HTTP/S) Hands-on secure communications/cybersecurity feature implementation Embedded C or C++ 11/14 RTOS experience (ThreadX, Azure RTOS, or FreeRTOS) Bare-metal development and low-level driver experience Familiarity with cybersecurity standards/frameworks (e.g. IEC 62443) Strong diagnostic, problem-solving, and communication skills Desirable: Awareness of the Cyber Resilience Act and connected-product regulations Experience supporting compliance, certification, or customer cybersecurity requests ARM Cortex-M / STM32 experience Exposure to SPI, I2C, I2S, UART, DMA Hardware test and debug experience Qualifications: Bachelor's degree in Electrical Engineering, Computer Science, or equivalent experience. Package: 60,000- 70,000 DOE 37.5 hrs/week Hybrid Well-resourced team delivering a genuinely leading-edge development programme. Get in touch with KO2 today with an up to date CV for a confidential conversation.
KO2 Embedded Recruitment Solutions LTD
Salford, Manchester
Software Engineer - C++, C and/or C# Location: Manchester + Hybrid Working From Home Salary: Up to 57,000 DOE + Benefits The Opportunity KO2's client is seeking a Software Engineer to join their established engineering team based in Manchester. This is an excellent opportunity for a software developer who enjoys solving technical challenges, working within a collaborative environment, and continuously developing their skills. The role is particularly suited to engineers who have experience developing software for real-world products, embedded systems, or environments where performance, efficiency, and resource management are important considerations. KO2's client has a proven track record of supporting engineers from a range of technical backgrounds and helping them develop new skills whilst working on innovative products. Key Responsibilities Design, develop, test, and maintain high-quality software solutions. Develop software that forms part of real-world products and systems. Collaborate with engineers and stakeholders to deliver reliable and efficient solutions. Participate in code reviews and contribute to software architecture and design discussions. Investigate, troubleshoot, and resolve technical issues. Support continuous improvement of development processes and engineering best practices. What KO2's Client Is Looking For Essential Commercial experience in object-oriented software development. Strong understanding of software engineering principles and development practices. Experience with programming language such as C#, C, C++ Microsoft Visual Studio & git version control. Experience working on software that interacts with hardware, physical products, industrial systems, or embedded platforms, or a genuine interest in moving into this type of environment . Understanding of performance optimisation, efficient memory usage, or development within resource-constrained environments. Excellent problem-solving and analytical skills. Strong communication skills and the ability to work effectively within a team. Desirable Experience with embedded software development. Experience working within memory-constrained or performance-critical systems. Experience with C# and .NET technologies. Fieldbus, industrial Ethernet protocols, MQTT Knowledge of modern software development methodologies. Exposure to electronics, industrial automation, instrumentation, IoT, or other product-development environments. The Person KO2's client values attitude, curiosity, and a willingness to learn just as highly as technical capability. They are open to candidates from a variety of backgrounds, including embedded systems, industrial software, games development, and other engineering disciplines. The ideal candidate will enjoy understanding how software interacts with real products and systems and will be motivated by solving complex technical problems. They will be someone who embraces learning opportunities and can grow within a supportive engineering team. What's On Offer Hybrid working, combining home working with time in the Manchester office. A supportive and collaborative engineering environment. Exposure to technically challenging projects and real-world products. Competitive salary and benefits package. Ongoing mentoring and professional development opportunities. Long-term career progression within a growing business. Apply If you're a Software Engineer with experience of, or an interest in, embedded systems, real-world products, or resource-constrained environments, and you're looking for a role where your potential is valued as highly as your current experience, KO2's client would be keen to hear from you.
Jul 31, 2026
Full time
Software Engineer - C++, C and/or C# Location: Manchester + Hybrid Working From Home Salary: Up to 57,000 DOE + Benefits The Opportunity KO2's client is seeking a Software Engineer to join their established engineering team based in Manchester. This is an excellent opportunity for a software developer who enjoys solving technical challenges, working within a collaborative environment, and continuously developing their skills. The role is particularly suited to engineers who have experience developing software for real-world products, embedded systems, or environments where performance, efficiency, and resource management are important considerations. KO2's client has a proven track record of supporting engineers from a range of technical backgrounds and helping them develop new skills whilst working on innovative products. Key Responsibilities Design, develop, test, and maintain high-quality software solutions. Develop software that forms part of real-world products and systems. Collaborate with engineers and stakeholders to deliver reliable and efficient solutions. Participate in code reviews and contribute to software architecture and design discussions. Investigate, troubleshoot, and resolve technical issues. Support continuous improvement of development processes and engineering best practices. What KO2's Client Is Looking For Essential Commercial experience in object-oriented software development. Strong understanding of software engineering principles and development practices. Experience with programming language such as C#, C, C++ Microsoft Visual Studio & git version control. Experience working on software that interacts with hardware, physical products, industrial systems, or embedded platforms, or a genuine interest in moving into this type of environment . Understanding of performance optimisation, efficient memory usage, or development within resource-constrained environments. Excellent problem-solving and analytical skills. Strong communication skills and the ability to work effectively within a team. Desirable Experience with embedded software development. Experience working within memory-constrained or performance-critical systems. Experience with C# and .NET technologies. Fieldbus, industrial Ethernet protocols, MQTT Knowledge of modern software development methodologies. Exposure to electronics, industrial automation, instrumentation, IoT, or other product-development environments. The Person KO2's client values attitude, curiosity, and a willingness to learn just as highly as technical capability. They are open to candidates from a variety of backgrounds, including embedded systems, industrial software, games development, and other engineering disciplines. The ideal candidate will enjoy understanding how software interacts with real products and systems and will be motivated by solving complex technical problems. They will be someone who embraces learning opportunities and can grow within a supportive engineering team. What's On Offer Hybrid working, combining home working with time in the Manchester office. A supportive and collaborative engineering environment. Exposure to technically challenging projects and real-world products. Competitive salary and benefits package. Ongoing mentoring and professional development opportunities. Long-term career progression within a growing business. Apply If you're a Software Engineer with experience of, or an interest in, embedded systems, real-world products, or resource-constrained environments, and you're looking for a role where your potential is valued as highly as your current experience, KO2's client would be keen to hear from you.
Electronics & Embedded Software Engineer Location: Macclesfield (Onsite - 4 days/week) Salary: 60,000 - 65,000 + benefits We are seeking a well-rounded Electronics & Embedded Software Engineer to join a growing engineering team in Macclesfield. This is a hands-on role offering full lifecycle ownership-from concept and hardware design through to firmware development and signal processing. The Role This position is approximately a 50/50 split between electronics design and embedded software/firmware development, depending on project phase. You will be responsible for: Designing complex, multi-layer PCBs Developing embedded firmware for data acquisition and processing Working across the full product lifecycle-from blank sheet design to finished implementation Handling high-speed, multi-channel data acquisition systems Implementing efficient, real-time signal processing solutions Essential Skills & Experience A strong foundation in both electronics and embedded systems is required, but Digital Signal Processing (DSP) experience is essential. Specifically, you should have: Practical experience implementing DSP techniques in embedded systems (hardware and/or firmware) Understanding of filtering concepts, including IIR and FIR filters Knowledge of decimation chains and signal conditioning Experience working with high data rates (e.g. tens of kS/s across multiple channels) Ability to optimise processing to avoid CPU bottlenecks In addition, you should be comfortable: Taking ownership of complete engineering solutions independently Working in a small team environment rather than a highly segmented large organisation Making sound engineering judgements across both hardware and software domains Working Environment Onsite collaboration is key - this role requires 4 days per week in the office (Monday-Thursday) Fridays are a relaxed half-day (8:00-12:30), with flexibility to work from home or in the office About You You'll be a proactive, self-sufficient engineer who enjoys owning projects end-to-end. This role suits someone who thrives in a collaborative, onsite environment and wants to make a meaningful technical impact over the long term.
Jul 31, 2026
Full time
Electronics & Embedded Software Engineer Location: Macclesfield (Onsite - 4 days/week) Salary: 60,000 - 65,000 + benefits We are seeking a well-rounded Electronics & Embedded Software Engineer to join a growing engineering team in Macclesfield. This is a hands-on role offering full lifecycle ownership-from concept and hardware design through to firmware development and signal processing. The Role This position is approximately a 50/50 split between electronics design and embedded software/firmware development, depending on project phase. You will be responsible for: Designing complex, multi-layer PCBs Developing embedded firmware for data acquisition and processing Working across the full product lifecycle-from blank sheet design to finished implementation Handling high-speed, multi-channel data acquisition systems Implementing efficient, real-time signal processing solutions Essential Skills & Experience A strong foundation in both electronics and embedded systems is required, but Digital Signal Processing (DSP) experience is essential. Specifically, you should have: Practical experience implementing DSP techniques in embedded systems (hardware and/or firmware) Understanding of filtering concepts, including IIR and FIR filters Knowledge of decimation chains and signal conditioning Experience working with high data rates (e.g. tens of kS/s across multiple channels) Ability to optimise processing to avoid CPU bottlenecks In addition, you should be comfortable: Taking ownership of complete engineering solutions independently Working in a small team environment rather than a highly segmented large organisation Making sound engineering judgements across both hardware and software domains Working Environment Onsite collaboration is key - this role requires 4 days per week in the office (Monday-Thursday) Fridays are a relaxed half-day (8:00-12:30), with flexibility to work from home or in the office About You You'll be a proactive, self-sufficient engineer who enjoys owning projects end-to-end. This role suits someone who thrives in a collaborative, onsite environment and wants to make a meaningful technical impact over the long term.
Manufacturing Planner About the role: We are looking for a Manufacturing Planner to work within the Engineering Function to support new business development as well as existing programs. The Manufacturing Planner role provides ownership and accountability of the creation/ maintenance of electronic work packages for each Maintenance, repair or modification input using GoldESP IG1 tool in accordance with PT145 and policy and processes. This role is to support delivery of Maintenance and Modification support of the E7 Wedgetail Mk1 AEW&C Aircraft during its initial production phase in Birmingham. Roles and responsibilities: Authors technical work instructions to approved process & regulatory requirements, writing, editing & proof-reading text, collating & verifying technical /engineering information, creating and editing bespoke work instructions. Interprets multiple source formats of approved engineering data from Original Equipment Manufacturer (OEM), Design Organisation, or Applicable Customer controlled Maintenance data sources to produce a standardised, easy to use & logical set of production/manufacturing plans with consideration of regulatory requirements for accurate maintenance recording. Supports the creation, receipt and delivery of multiple complex electronic manufacturing plans/work packages. Manages configuration control of plan sets including engineering baseline establishment lists, manufacturing work instructions (Master Plans), associated aircraft specific plans (A/C Work Orders) and Nonconformance Report (NCR) Work Orders (WOs). Manging the workflow of technical queries from the shop floor to key engineering functions and maintaining/reporting on associated metrics. Qualifications and Experience: Experienced in scheduled maintenance, repair and modification of aircraft/components. Capable of creating detailed work instructions using technical writing ensuring all requirements and work recording measures are met. Proven working knowledge of Engineering Resource Planning tools such as GoldESP IG1. An excellent communicator, with a demonstrable ability to communicate and understand the technical work requirements of the team in order that key business targets are met. Working knowledge of MAA Regulatory Articles (RA), MAA Regulatory Publication (MRP) Part 145, aviation Quality Assurance (QA) and Safety Management System (SMS) processes, and the application of these requirements within their area of accountability, responsibility and authority. Capable of understanding and interpreting Technical Documents, Technical Drawings and/or associated Authorised Technical Publications (ATP s), to provide guidance and support to the teams working on the aircraft or in the production of Work orders. Capable of working and communicating within management levels, cross functional areas and the customer effectively. Capable and experienced in sequencing and controlling demanding workloads, on time, to budget and to the required standard. Knowledge of the air system scheduled maintenance to enable effective Review, acceptance and rejection of SoW, AWRs, deferred work etc at the pre-input phase. Please apply or get in contact on (phone number removed) / (url removed)
Jul 31, 2026
Contractor
Manufacturing Planner About the role: We are looking for a Manufacturing Planner to work within the Engineering Function to support new business development as well as existing programs. The Manufacturing Planner role provides ownership and accountability of the creation/ maintenance of electronic work packages for each Maintenance, repair or modification input using GoldESP IG1 tool in accordance with PT145 and policy and processes. This role is to support delivery of Maintenance and Modification support of the E7 Wedgetail Mk1 AEW&C Aircraft during its initial production phase in Birmingham. Roles and responsibilities: Authors technical work instructions to approved process & regulatory requirements, writing, editing & proof-reading text, collating & verifying technical /engineering information, creating and editing bespoke work instructions. Interprets multiple source formats of approved engineering data from Original Equipment Manufacturer (OEM), Design Organisation, or Applicable Customer controlled Maintenance data sources to produce a standardised, easy to use & logical set of production/manufacturing plans with consideration of regulatory requirements for accurate maintenance recording. Supports the creation, receipt and delivery of multiple complex electronic manufacturing plans/work packages. Manages configuration control of plan sets including engineering baseline establishment lists, manufacturing work instructions (Master Plans), associated aircraft specific plans (A/C Work Orders) and Nonconformance Report (NCR) Work Orders (WOs). Manging the workflow of technical queries from the shop floor to key engineering functions and maintaining/reporting on associated metrics. Qualifications and Experience: Experienced in scheduled maintenance, repair and modification of aircraft/components. Capable of creating detailed work instructions using technical writing ensuring all requirements and work recording measures are met. Proven working knowledge of Engineering Resource Planning tools such as GoldESP IG1. An excellent communicator, with a demonstrable ability to communicate and understand the technical work requirements of the team in order that key business targets are met. Working knowledge of MAA Regulatory Articles (RA), MAA Regulatory Publication (MRP) Part 145, aviation Quality Assurance (QA) and Safety Management System (SMS) processes, and the application of these requirements within their area of accountability, responsibility and authority. Capable of understanding and interpreting Technical Documents, Technical Drawings and/or associated Authorised Technical Publications (ATP s), to provide guidance and support to the teams working on the aircraft or in the production of Work orders. Capable of working and communicating within management levels, cross functional areas and the customer effectively. Capable and experienced in sequencing and controlling demanding workloads, on time, to budget and to the required standard. Knowledge of the air system scheduled maintenance to enable effective Review, acceptance and rejection of SoW, AWRs, deferred work etc at the pre-input phase. Please apply or get in contact on (phone number removed) / (url removed)
An established and growing main contractor is seeking an experienced and highly organised Proposals Manager to lead the production of high-quality, compelling bid submissions across a diverse portfolio of projects across Cat A & Cat B fit out. You will be reporting into the Pre Construction Director and taking ownership of the end-to-end bid process, managing multiple tender submissions, developing bid winning strategies, create engaging submission documents. The client is looking for someone who can work with stakeholders across the business, able to take ownership and think strategically. Proposals Manager roles & responsibilities Managing the end-to-end bid and proposal process from PQQ/RFI through to final tender submission Coordinating multidisciplinary bid teams including estimators, planners, design managers, commercial teams and operational leads Leading tender planning meetings and maintaining bid programmes and submission deadlines Writing, editing and reviewing high-quality proposal content Developing compelling responses for quality questions, methodology statements and technical submissions Ensuring submissions align with client requirements, scoring criteria and framework standards Managing bid documentation, formatting, branding and presentation quality Coordinating input from supply chain partners and subcontractors Working closely with operational teams to capture project delivery strategies and technical solutions Managing portal uploads and electronic tender submissions Reviewing ITTs, PQQs, RFQs and framework requirements for compliance Maintaining bid libraries, case studies, CVs and template content Supporting interview preparation and presentation submissions for shortlisted tenders Leading lessons-learned reviews following tender outcomes Monitoring competitor activity and market intelligence Supporting framework renewals and public-sector procurement submissions Driving continuous improvement in bid quality and win rates Ensuring governance approvals and sign-offs are completed before submission Liaising with directors and senior leadership throughout the bid lifecycle Managing multiple concurrent bids with strict deadlines Supporting business development strategy and pipeline planning Proposal Manager requirements Degree, HNC/HND or equivalent qualification in Business, Marketing, Communications, Construction Management or a related discipline is desirable but not essential. Proven experience managing bids and proposals within the construction, engineering, architecture or built environment sector preferred. Experience facilitating bid meetings and coordinating multidisciplinary teams. Demonstrated success in coordinating complex tender submissions from inception through to completion. Proficient in using Adobe InDesign and the Microsoft Office Suite. Proposal Manager Benefits Competitive salary Travel allowance Excellent annual leave package Competitive pension Private healthcare Further progression within the business + More
Jul 31, 2026
Full time
An established and growing main contractor is seeking an experienced and highly organised Proposals Manager to lead the production of high-quality, compelling bid submissions across a diverse portfolio of projects across Cat A & Cat B fit out. You will be reporting into the Pre Construction Director and taking ownership of the end-to-end bid process, managing multiple tender submissions, developing bid winning strategies, create engaging submission documents. The client is looking for someone who can work with stakeholders across the business, able to take ownership and think strategically. Proposals Manager roles & responsibilities Managing the end-to-end bid and proposal process from PQQ/RFI through to final tender submission Coordinating multidisciplinary bid teams including estimators, planners, design managers, commercial teams and operational leads Leading tender planning meetings and maintaining bid programmes and submission deadlines Writing, editing and reviewing high-quality proposal content Developing compelling responses for quality questions, methodology statements and technical submissions Ensuring submissions align with client requirements, scoring criteria and framework standards Managing bid documentation, formatting, branding and presentation quality Coordinating input from supply chain partners and subcontractors Working closely with operational teams to capture project delivery strategies and technical solutions Managing portal uploads and electronic tender submissions Reviewing ITTs, PQQs, RFQs and framework requirements for compliance Maintaining bid libraries, case studies, CVs and template content Supporting interview preparation and presentation submissions for shortlisted tenders Leading lessons-learned reviews following tender outcomes Monitoring competitor activity and market intelligence Supporting framework renewals and public-sector procurement submissions Driving continuous improvement in bid quality and win rates Ensuring governance approvals and sign-offs are completed before submission Liaising with directors and senior leadership throughout the bid lifecycle Managing multiple concurrent bids with strict deadlines Supporting business development strategy and pipeline planning Proposal Manager requirements Degree, HNC/HND or equivalent qualification in Business, Marketing, Communications, Construction Management or a related discipline is desirable but not essential. Proven experience managing bids and proposals within the construction, engineering, architecture or built environment sector preferred. Experience facilitating bid meetings and coordinating multidisciplinary teams. Demonstrated success in coordinating complex tender submissions from inception through to completion. Proficient in using Adobe InDesign and the Microsoft Office Suite. Proposal Manager Benefits Competitive salary Travel allowance Excellent annual leave package Competitive pension Private healthcare Further progression within the business + More
The Project Engineer is responsible for the technical execution and coordination of complex research and development (R&D) programs, serving as the technical lead for assigned projects or work packages. This role combines strong engineering expertise with project management capabilities to ensure successful delivery of technical objectives while balancing scope, schedule, cost, and risk. The Project Engineer works closely with Program Managers, engineering teams, customers, and global stakeholders to mature advanced technologies from concept through demonstration and transition. Honeywell Aerospace products and services are used on virtually every commercial, defense, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. Safer, More Fuel-Efficient Flying and Innovations for the Future of Aviation. Key Responsibilities: Lead technical execution of assigned R&D projects and work packages from planning through delivery. Develop and maintain technical execution plans aligned with scope, schedule, budget, and customer requirements. Coordinate multidisciplinary engineering teams and serve as the primary technical focal point across stakeholders. Partner with Program Managers to manage execution, technical risks, resource planning, and project milestones. Drive technical problem solving, design reviews, risk mitigation, and issue resolution. Support proposal development, technology roadmaps, customer interactions, and strategic planning activities. Key skills: Bachelor's degree in Engineering or a related technical discipline. Experience in an R&D or advanced technology environment. Strong Project Engineering and Project Management skills with demonstrated technical leadership. Ability to understand complex customer requirements and translate them into executable engineering plans. Experience coordinating cross-functional engineering teams and managing multiple stakeholders. Excellent communication, organizational, and problem-solving skills. Our Offer Opportunity to work on cutting-edge technologies with global impact. A collaborative and innovative environment within a world-leading technology company. Professional development and career growth opportunities. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join us now and be part of a global team of thinkers, innovators, dreamers, and doers who make the things that make the future!
Jul 31, 2026
Full time
The Project Engineer is responsible for the technical execution and coordination of complex research and development (R&D) programs, serving as the technical lead for assigned projects or work packages. This role combines strong engineering expertise with project management capabilities to ensure successful delivery of technical objectives while balancing scope, schedule, cost, and risk. The Project Engineer works closely with Program Managers, engineering teams, customers, and global stakeholders to mature advanced technologies from concept through demonstration and transition. Honeywell Aerospace products and services are used on virtually every commercial, defense, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. Safer, More Fuel-Efficient Flying and Innovations for the Future of Aviation. Key Responsibilities: Lead technical execution of assigned R&D projects and work packages from planning through delivery. Develop and maintain technical execution plans aligned with scope, schedule, budget, and customer requirements. Coordinate multidisciplinary engineering teams and serve as the primary technical focal point across stakeholders. Partner with Program Managers to manage execution, technical risks, resource planning, and project milestones. Drive technical problem solving, design reviews, risk mitigation, and issue resolution. Support proposal development, technology roadmaps, customer interactions, and strategic planning activities. Key skills: Bachelor's degree in Engineering or a related technical discipline. Experience in an R&D or advanced technology environment. Strong Project Engineering and Project Management skills with demonstrated technical leadership. Ability to understand complex customer requirements and translate them into executable engineering plans. Experience coordinating cross-functional engineering teams and managing multiple stakeholders. Excellent communication, organizational, and problem-solving skills. Our Offer Opportunity to work on cutting-edge technologies with global impact. A collaborative and innovative environment within a world-leading technology company. Professional development and career growth opportunities. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join us now and be part of a global team of thinkers, innovators, dreamers, and doers who make the things that make the future!
WHAT IS IN IT FOR YOU? Salary: £28,000 - £30,000 per annum + Overtime Employment Type: Full-time, Permanent Location: Glasgow based covering Scotland Package & Benefits: Pension, holiday entitlement, company benefits, high-quality tools, equipment, and protective clothing Working Pattern: Regular travel and occasional overnight stays as required THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager, the Solar PV Labourer will provide practical support to the Solar PV Roofer and Solar PV Electrician as part of a dedicated 3-person installation team delivering domestic and commercial Solar PV and Battery Energy Storage Systems. Support the installation of domestic and commercial Solar PV systems, assisting both the Roofer and Electrician throughout each project. Load, unload, and organize Solar PV modules, mounting equipment, tools, and materials safely. Assist with site set-up, access arrangements, work-area preparation, cable routes, containment, and equipment positioning. Support the Roofer with the movement and positioning of roof hooks, rails, mounting systems, and basic roofing activities under supervision. Maintain a clean, safe, and organized working environment, ensuring packaging, waste, and surplus materials are removed and customer properties are protected. Maintain company vehicles, tools, and equipment in a clean and serviceable condition. Complete electronic job records, photographs, and documentation where required. THE PERSON Qualifications & Safety: Valid CSCS Labourer Card, Full UK Driving Licence, and Working at Height training are essential. (Manual Handling, Asbestos Awareness, PASMA, IPAF, or First Aid are desirable). Experience: Previous experience working in a labouring, roofing, construction, or site-based installation role, with experience working in teams and carrying out physically demanding work outdoors. Skills & Knowledge: Good practical manual skills using basic hand and power tools safely, basic understanding of construction site safety, manual handling techniques, and site housekeeping. Behaviours: Strong safety-first attitude, reliable, punctual, comfortable working at height, and willing to travel across Scotland with occasional overnight stays. TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
Jul 31, 2026
Full time
WHAT IS IN IT FOR YOU? Salary: £28,000 - £30,000 per annum + Overtime Employment Type: Full-time, Permanent Location: Glasgow based covering Scotland Package & Benefits: Pension, holiday entitlement, company benefits, high-quality tools, equipment, and protective clothing Working Pattern: Regular travel and occasional overnight stays as required THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager, the Solar PV Labourer will provide practical support to the Solar PV Roofer and Solar PV Electrician as part of a dedicated 3-person installation team delivering domestic and commercial Solar PV and Battery Energy Storage Systems. Support the installation of domestic and commercial Solar PV systems, assisting both the Roofer and Electrician throughout each project. Load, unload, and organize Solar PV modules, mounting equipment, tools, and materials safely. Assist with site set-up, access arrangements, work-area preparation, cable routes, containment, and equipment positioning. Support the Roofer with the movement and positioning of roof hooks, rails, mounting systems, and basic roofing activities under supervision. Maintain a clean, safe, and organized working environment, ensuring packaging, waste, and surplus materials are removed and customer properties are protected. Maintain company vehicles, tools, and equipment in a clean and serviceable condition. Complete electronic job records, photographs, and documentation where required. THE PERSON Qualifications & Safety: Valid CSCS Labourer Card, Full UK Driving Licence, and Working at Height training are essential. (Manual Handling, Asbestos Awareness, PASMA, IPAF, or First Aid are desirable). Experience: Previous experience working in a labouring, roofing, construction, or site-based installation role, with experience working in teams and carrying out physically demanding work outdoors. Skills & Knowledge: Good practical manual skills using basic hand and power tools safely, basic understanding of construction site safety, manual handling techniques, and site housekeeping. Behaviours: Strong safety-first attitude, reliable, punctual, comfortable working at height, and willing to travel across Scotland with occasional overnight stays. TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
WHAT IS IN IT FOR YOU? Salary: £32,500 - £35,000 per annum + Overtime Location: Glasgow based covering Scotland Employment Type: Full-time, Permanent Package & Benefits: Tools, equipment, pension, holiday entitlement, and company benefits Working Pattern: Regular travel and occasional overnight stays as required THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager, the Solar PV Roofer will take responsibility for all roofing activities associated with the installation of domestic and commercial Solar PV and Battery Energy Storage Systems, working alongside a Solar PV Electrician and Labourer. Carry out roofing works and install roof hooks, mounting systems, rails, and Solar PV modules in accordance with design specifications. Assess roof conditions prior to installation, identify defects, and carry out minor roof repairs where required. Ensure all roof penetrations and weatherproofing are completed to the highest standards. Support and direct the Solar PV Labourer during roofing activities while maintaining excellent housekeeping. Ensure all work complies with manufacturer guidance, MCS standards, and company health and safety procedures. Maintain company tools, equipment, and assigned vehicle in proper condition. Complete electronic job records and represent the business professionally at all times. THE PERSON Qualifications & Safety: Full UK Driving Licence, CSCS Card, and Working at Height Training are essential. Experience: Proven roofing experience working at height with roofing tools and equipment, alongside direct Solar PV installation experience. (Roof tiling/slating, flat roofing, or MCS compliance experience is desirable). Skills & Knowledge: Excellent roofing skills, ability to read technical drawings, sound knowledge of domestic/commercial roofing systems, working at height regulations, and MCS installation requirements. Behaviours: Strong safety-first attitude, high pride in workmanship, strong teamwork and communication skills, comfortable working outdoors in all weather conditions, and willing to travel across Scotland with occasional overnight stays. TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
Jul 31, 2026
Full time
WHAT IS IN IT FOR YOU? Salary: £32,500 - £35,000 per annum + Overtime Location: Glasgow based covering Scotland Employment Type: Full-time, Permanent Package & Benefits: Tools, equipment, pension, holiday entitlement, and company benefits Working Pattern: Regular travel and occasional overnight stays as required THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager, the Solar PV Roofer will take responsibility for all roofing activities associated with the installation of domestic and commercial Solar PV and Battery Energy Storage Systems, working alongside a Solar PV Electrician and Labourer. Carry out roofing works and install roof hooks, mounting systems, rails, and Solar PV modules in accordance with design specifications. Assess roof conditions prior to installation, identify defects, and carry out minor roof repairs where required. Ensure all roof penetrations and weatherproofing are completed to the highest standards. Support and direct the Solar PV Labourer during roofing activities while maintaining excellent housekeeping. Ensure all work complies with manufacturer guidance, MCS standards, and company health and safety procedures. Maintain company tools, equipment, and assigned vehicle in proper condition. Complete electronic job records and represent the business professionally at all times. THE PERSON Qualifications & Safety: Full UK Driving Licence, CSCS Card, and Working at Height Training are essential. Experience: Proven roofing experience working at height with roofing tools and equipment, alongside direct Solar PV installation experience. (Roof tiling/slating, flat roofing, or MCS compliance experience is desirable). Skills & Knowledge: Excellent roofing skills, ability to read technical drawings, sound knowledge of domestic/commercial roofing systems, working at height regulations, and MCS installation requirements. Behaviours: Strong safety-first attitude, high pride in workmanship, strong teamwork and communication skills, comfortable working outdoors in all weather conditions, and willing to travel across Scotland with occasional overnight stays. TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
You will take complete ownership of the software architecture for a rapidly growing research and development team backed by a brand new multimillion-pound investment into robotics technologies. This role allows you to shape high-integrity automation from early concepts through to deployment whilst leading the integration of next-generation autonomous capabilities. You will drive technical direction within a fast-expanding environment where your architecture directly enables real-world physical systems to operate safely and effectively. Essential requirements British nationality is required due to security obligations. Experienced Technical Leader Experience with Linux and developing real-time software in C/C++ or Python Strong background implementing in safety-critical software . Your package Excellent basic salary + a bonus of up to 35% What you will work on Define and develop end-to-end software architecture for advanced vehicle automation and robotic systems. Establish robust continuous integration and continuous deployment processes for safety-critical software components. Lead architectural design for computer vision, sensor integration, digital twin technology and real-time simulations. Collaborate closely with cross-functional engineering teams to embed software systems seamlessly into physical hardware products. Skills and background A degree in software engineering, computer science or an equivalent technical qualification. Essential technical proficiency using Linux alongside real-time software development in C, C++ or Python. Some understanding of electronics with the ability to read electrical schematics is a big plus Prior experience with the ROS, ML algorithms or computer vision tools is highly advantageous. Benefits and flexibility You will enjoy practical benefits including: A combined pension scheme reaching up to 16% Cash Bonus of 35% Private medical insurance coverage. Free daily lunch provided onsite. Free parking Wellness Paid Professional memberships Location and setup Based in Newcastle with a hybrid setup - 3x onsite each week. Some occasional UK and overseas travel to partner sites may be required.
Jul 31, 2026
Full time
You will take complete ownership of the software architecture for a rapidly growing research and development team backed by a brand new multimillion-pound investment into robotics technologies. This role allows you to shape high-integrity automation from early concepts through to deployment whilst leading the integration of next-generation autonomous capabilities. You will drive technical direction within a fast-expanding environment where your architecture directly enables real-world physical systems to operate safely and effectively. Essential requirements British nationality is required due to security obligations. Experienced Technical Leader Experience with Linux and developing real-time software in C/C++ or Python Strong background implementing in safety-critical software . Your package Excellent basic salary + a bonus of up to 35% What you will work on Define and develop end-to-end software architecture for advanced vehicle automation and robotic systems. Establish robust continuous integration and continuous deployment processes for safety-critical software components. Lead architectural design for computer vision, sensor integration, digital twin technology and real-time simulations. Collaborate closely with cross-functional engineering teams to embed software systems seamlessly into physical hardware products. Skills and background A degree in software engineering, computer science or an equivalent technical qualification. Essential technical proficiency using Linux alongside real-time software development in C, C++ or Python. Some understanding of electronics with the ability to read electrical schematics is a big plus Prior experience with the ROS, ML algorithms or computer vision tools is highly advantageous. Benefits and flexibility You will enjoy practical benefits including: A combined pension scheme reaching up to 16% Cash Bonus of 35% Private medical insurance coverage. Free daily lunch provided onsite. Free parking Wellness Paid Professional memberships Location and setup Based in Newcastle with a hybrid setup - 3x onsite each week. Some occasional UK and overseas travel to partner sites may be required.
Graduate Building Services M&E Engineer Location: Newcastle-under-Lyme Salary: 23,000- 28,000 Start Date: Immediate Overview Are you a recent engineering graduate looking to kickstart your career in a dynamic and supportive environment? An established engineering consultancy in Newcastle-under-Lyme is seeking a motivated and enthusiastic Graduate Engineer to join its growing team. This is an exciting opportunity to gain hands-on experience across a variety of building services engineering projects while working alongside experienced professionals. Benefits Competitive salary ranging from 23,000 to 28,000. Structured training and development opportunities. Exposure to live projects across various sectors. A supportive and collaborative work environment. The chance to build a successful and rewarding career in engineering. Day-to-Day Your daily activities will include collaborating with a team of skilled engineers, contributing to the design and development of innovative engineering solutions, and gaining exposure to real-world projects. You will have the opportunity to attend client meetings, visit project sites, and work on a variety of tasks that will help you build a strong foundation for your engineering career. Responsibilities As a Graduate Engineer, you will: Assist in the design of heating, cooling, ventilation, electrical distribution, and lighting systems. Support energy modelling and utility applications. Produce engineering drawings using AutoCAD. Prepare technical reports and obtain supplier quotations. Attend site surveys and design team meetings with senior engineers. Conduct research to support project delivery. Provide general administrative support as required. Qualifications To be successful in this role, you should have: A degree in an engineering discipline (e.g., Mechanical, Electrical, Electronic, Mechatronic, Controls, or similar), ideally achieving a 2:1 or above. Strong communication skills and a proactive attitude towards learning. A full UK driving licence (desirable but not essential). If you are a driven and ambitious graduate eager to make your mark in the engineering industry, we would love to hear from you. Apply now to join a growing consultancy where your skills and potential will be nurtured and developed.
Jul 31, 2026
Full time
Graduate Building Services M&E Engineer Location: Newcastle-under-Lyme Salary: 23,000- 28,000 Start Date: Immediate Overview Are you a recent engineering graduate looking to kickstart your career in a dynamic and supportive environment? An established engineering consultancy in Newcastle-under-Lyme is seeking a motivated and enthusiastic Graduate Engineer to join its growing team. This is an exciting opportunity to gain hands-on experience across a variety of building services engineering projects while working alongside experienced professionals. Benefits Competitive salary ranging from 23,000 to 28,000. Structured training and development opportunities. Exposure to live projects across various sectors. A supportive and collaborative work environment. The chance to build a successful and rewarding career in engineering. Day-to-Day Your daily activities will include collaborating with a team of skilled engineers, contributing to the design and development of innovative engineering solutions, and gaining exposure to real-world projects. You will have the opportunity to attend client meetings, visit project sites, and work on a variety of tasks that will help you build a strong foundation for your engineering career. Responsibilities As a Graduate Engineer, you will: Assist in the design of heating, cooling, ventilation, electrical distribution, and lighting systems. Support energy modelling and utility applications. Produce engineering drawings using AutoCAD. Prepare technical reports and obtain supplier quotations. Attend site surveys and design team meetings with senior engineers. Conduct research to support project delivery. Provide general administrative support as required. Qualifications To be successful in this role, you should have: A degree in an engineering discipline (e.g., Mechanical, Electrical, Electronic, Mechatronic, Controls, or similar), ideally achieving a 2:1 or above. Strong communication skills and a proactive attitude towards learning. A full UK driving licence (desirable but not essential). If you are a driven and ambitious graduate eager to make your mark in the engineering industry, we would love to hear from you. Apply now to join a growing consultancy where your skills and potential will be nurtured and developed.
WHAT IS IN IT FOR YOU? Employment Type: Permanent Location: Glasgow based covering Scotland Package: £40,000 per annum + overtime opportunities Working Pattern: Full-time (requires regular travel and occasional overnight stays) Benefits: High-quality branded company vehicle, tools, and testing equipment; pension scheme; holiday entitlement; ongoing training and structured career progression. THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager and Electrical Qualified Supervisor, you will lead all electrical installation activities associated with domestic and commercial Solar PV and Battery Energy Storage Systems. Working alongside a Solar Roofer and Labourer, your key responsibilities will include: Installing domestic and commercial Solar PV systems and commissioning Battery Energy Storage Systems (BESS). Carrying out AC/DC electrical installation works, setting up solar inverters, and installing generation meters. Conducting inspection, testing, and certification in full accordance with BS7671 standards (Electrical Installation & Minor Works Certificates). Performing safe isolation procedures and complex electrical fault-finding. Ensuring strict compliance with MCS standards, manufacturer guidelines, and health and safety legislation. Supporting and guiding the wider installation team while maintaining accurate electronic documentation via mobile devices/tablets. THE PERSON Qualifications (Essential): NVQ Level 3 in Electrical Installation, 18th Edition, 2391 Inspection & Testing (or equivalent), recognised Solar PV qualification, ECS Gold Card, and a Full UK Driving Licence. Experience: Proven track record in Solar PV installations, domestic and commercial electrical installation, and testing/inspection. Key Skills: Strong knowledge of BS7671, MCS requirements, BESS, safe isolation, and working at height safety. Excellent fault-finding skills and comfortable using digital certification software TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
Jul 31, 2026
Full time
WHAT IS IN IT FOR YOU? Employment Type: Permanent Location: Glasgow based covering Scotland Package: £40,000 per annum + overtime opportunities Working Pattern: Full-time (requires regular travel and occasional overnight stays) Benefits: High-quality branded company vehicle, tools, and testing equipment; pension scheme; holiday entitlement; ongoing training and structured career progression. THE BUSINESS Westray Recruitment Group is pleased to be representing an established clean energy specialist committed to driving the UK's transition to renewable energy. Working on behalf of housing associations, local authorities, commercial organisations, and private customers, our client delivers high-quality renewable energy installations designed to maximise energy generation and reduce carbon emissions. Due to rapid expansion within their installation division, they are currently recruiting dedicated installation teams across the UK. THE ROLE Reporting to the Field Operations Manager and Electrical Qualified Supervisor, you will lead all electrical installation activities associated with domestic and commercial Solar PV and Battery Energy Storage Systems. Working alongside a Solar Roofer and Labourer, your key responsibilities will include: Installing domestic and commercial Solar PV systems and commissioning Battery Energy Storage Systems (BESS). Carrying out AC/DC electrical installation works, setting up solar inverters, and installing generation meters. Conducting inspection, testing, and certification in full accordance with BS7671 standards (Electrical Installation & Minor Works Certificates). Performing safe isolation procedures and complex electrical fault-finding. Ensuring strict compliance with MCS standards, manufacturer guidelines, and health and safety legislation. Supporting and guiding the wider installation team while maintaining accurate electronic documentation via mobile devices/tablets. THE PERSON Qualifications (Essential): NVQ Level 3 in Electrical Installation, 18th Edition, 2391 Inspection & Testing (or equivalent), recognised Solar PV qualification, ECS Gold Card, and a Full UK Driving Licence. Experience: Proven track record in Solar PV installations, domestic and commercial electrical installation, and testing/inspection. Key Skills: Strong knowledge of BS7671, MCS requirements, BESS, safe isolation, and working at height safety. Excellent fault-finding skills and comfortable using digital certification software TO APPLY Please send your updated CV to Aaron Wadey in our Renewables team or apply direct by calling Westray Recruitment Group.
Designing test rigs and related strategies for sensor characterisation This role combines practical electronics, mechanical and software aspects to develop test rigs for the verification and characterisation of novel sensors, so you will need to be an experienced and adaptable hardware test engineer, and happy taking the initiative on coming up with solutions. This is a varied role requiring hands-on on engineering skills - you should be adept at fabricating mechanical fixture, creating custom circuitry / cabling, writing basic software tools and scripts, data analysis and presentation of the results. You will become an expert in the company's sensor designs as well as inventing clever ways to test their functionality. Tasks may include designing and building electromechanical test rigs, specifying and carrying out automated and manual test campaigns for functionality verification and device characterisation. You'll help troubleshoot any issues that may arise, analyse results, and create and maintain relevant documentation. You will need: Practical electronics and mechanical skills for designing and building fixtures or jigs, preferably with experience using a CAD package such as SolidWorks Good familiarity with standard electronics test equipment (multimeters, oscilloscopes etc.) Excellent analytical and problem solving skills Strong communication skills and the ability to write clear concise documentation Full existing UK work permission without time restriction or the need for sponsorship This role would suit an engineer with a broad skillset and inventive turn of mind, as it offers a variety of interesting challenges and opportunities for creative thought, and the chance to make a major impact to this ambitious and growing company. A competitive salary and benefits package will be available to the successful candidate. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27666 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
Jul 31, 2026
Full time
Designing test rigs and related strategies for sensor characterisation This role combines practical electronics, mechanical and software aspects to develop test rigs for the verification and characterisation of novel sensors, so you will need to be an experienced and adaptable hardware test engineer, and happy taking the initiative on coming up with solutions. This is a varied role requiring hands-on on engineering skills - you should be adept at fabricating mechanical fixture, creating custom circuitry / cabling, writing basic software tools and scripts, data analysis and presentation of the results. You will become an expert in the company's sensor designs as well as inventing clever ways to test their functionality. Tasks may include designing and building electromechanical test rigs, specifying and carrying out automated and manual test campaigns for functionality verification and device characterisation. You'll help troubleshoot any issues that may arise, analyse results, and create and maintain relevant documentation. You will need: Practical electronics and mechanical skills for designing and building fixtures or jigs, preferably with experience using a CAD package such as SolidWorks Good familiarity with standard electronics test equipment (multimeters, oscilloscopes etc.) Excellent analytical and problem solving skills Strong communication skills and the ability to write clear concise documentation Full existing UK work permission without time restriction or the need for sponsorship This role would suit an engineer with a broad skillset and inventive turn of mind, as it offers a variety of interesting challenges and opportunities for creative thought, and the chance to make a major impact to this ambitious and growing company. A competitive salary and benefits package will be available to the successful candidate. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27666 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.
Electronics Engineer - Programme Manager - Medical Devices - Cambridge Due to a growth in company output, there is a need for a new Programme Manager who has an Electronics Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the Electronics design aspects yourself. We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards. Alongside past work experience, it is expected that you hold a relevant degree within a suitable subject that led you into a Medical Devices Electronics Engineering role. It would also be advantageous if you hold a master's or PhD, but not essential as the active work experience in industry is more important. The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people's lives. This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously. I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485. People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview. Apart from working on industry changing technologies, you will be offered a proven career development plan, continuous training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you'd expect from a multinational blue-chip organisation. I expect a lot of interest in this role, so apply now or ensure consideration. For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on (phone number removed). Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.
Jul 31, 2026
Full time
Electronics Engineer - Programme Manager - Medical Devices - Cambridge Due to a growth in company output, there is a need for a new Programme Manager who has an Electronics Engineering pedigree. Based in Cambridge, you will be leading several projects. Some projects will involve you offering support and mentorship to junior members of staff, while other projects will involve you taking on the Electronics design aspects yourself. We are looking for someone who has been working hands on developing new Medical Devices technologies in their current role, while mentoring other members of staff. Most projects will be on electro-mechanical Medical Devices, so you will need to have worked on these types of technologies. They could be implantable medical devices, wearable tech or another medical technology that abide by EN60601 standards. Alongside past work experience, it is expected that you hold a relevant degree within a suitable subject that led you into a Medical Devices Electronics Engineering role. It would also be advantageous if you hold a master's or PhD, but not essential as the active work experience in industry is more important. The types of technologies you will be developing are lifesaving and life improving medical devices, truly industry disrupting technologies that will save and improve thousands of people's lives. This role will involve working with external and internal entities, involving a lot of communications both virtual and in real life, due to this it would be advantageous if you have worked in a role that involved communicating updates and project changes continuously. I mentioned knowing about EN60601, but it would also be essential to have a strong understanding of ISO 13485. People who have been successful in this role previously tend to have a highly technical hobby, this could be building drones, tinkering with engines, computer programming or another hobby that involves problem solving. If you do have such a hobby, make sure you highlight it on your CV to give you the best chance of gaining an interview. Apart from working on industry changing technologies, you will be offered a proven career development plan, continuous training to keep you at the forefront of the medical devices sector, excellent salary, bonus, enhanced pension, medical insurance, free meals and other excellent benefits you'd expect from a multinational blue-chip organisation. I expect a lot of interest in this role, so apply now or ensure consideration. For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on (phone number removed). Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.
Job Title: Electrical Design Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions. About the Role Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages) Select appropriate control, measurement, and electrical hardware based on customer requirements Produce electrical schematics, technical documentation, test plans, and commissioning documentation Build, test, troubleshoot, and commission electrical systems Support on-site installation and commissioning across customer sites Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions Participate in hardware design reviews and resolve technical issues across electrical and control systems Support supplier selection, component integration, and proof-of-concept activities Deliver projects on time, within budget, and to customer expectations About You Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline Experience designing electrical or control systems Proficient with EPLAN , AutoCAD Electrical , SolidWorks Electrical , or similar schematic design software Hands-on experience with electrical system build, testing, fault finding, and commissioning Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation Good understanding of EMC principles and practical electrical design Knowledge of CE/UKCA compliance and electrical design standards Strong problem-solving skills with the ability to work across multidisciplinary engineering teams Willingness to travel to customer sites across the UK (approximately 30-50%) Desirable Skills Functional safety or safety instrumented systems (e.g. IEC 61508) ATEX or hazardous area design experience Basic mechanical design for control panels and enclosures National Instruments (NI) hardware or software experience PLC programming or modification 18th Edition qualification Experience with safety PLCs or SISTEMA Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.
Jul 31, 2026
Full time
Job Title: Electrical Design Engineer Location: South Yorkshire (UK wide travel) Salary: Up to £50k (DOE) We're working with a specialist engineering company that designs and delivers bespoke systems for customers across a range of highly regulated industries. Due to continued growth, they're looking for an Electrical Design Engineer to join their systems integration team. This is an excellent opportunity to work on varied, technically challenging projects from concept through to installation and commissioning, collaborating with software, systems, and project engineers to deliver innovative solutions. About the Role Design electrical control systems and instrumentation using EPLAN (or similar electrical CAD packages) Select appropriate control, measurement, and electrical hardware based on customer requirements Produce electrical schematics, technical documentation, test plans, and commissioning documentation Build, test, troubleshoot, and commission electrical systems Support on-site installation and commissioning across customer sites Ensure designs comply with relevant industry standards, safety regulations, and CE/UKCA requirements Collaborate with software, mechanical, and systems engineers to deliver integrated engineering solutions Participate in hardware design reviews and resolve technical issues across electrical and control systems Support supplier selection, component integration, and proof-of-concept activities Deliver projects on time, within budget, and to customer expectations About You Degree qualified in Electrical, Electronic, Controls, Mechatronics, or a related engineering discipline Experience designing electrical or control systems Proficient with EPLAN , AutoCAD Electrical , SolidWorks Electrical , or similar schematic design software Hands-on experience with electrical system build, testing, fault finding, and commissioning Experience with PLC-based control hardware (e.g. Siemens, Allen-Bradley) or industrial instrumentation Good understanding of EMC principles and practical electrical design Knowledge of CE/UKCA compliance and electrical design standards Strong problem-solving skills with the ability to work across multidisciplinary engineering teams Willingness to travel to customer sites across the UK (approximately 30-50%) Desirable Skills Functional safety or safety instrumented systems (e.g. IEC 61508) ATEX or hazardous area design experience Basic mechanical design for control panels and enclosures National Instruments (NI) hardware or software experience PLC programming or modification 18th Edition qualification Experience with safety PLCs or SISTEMA Please note, we cannot offer sponsorship for this opportunity. If interested, please send over an updated CV.
Mechanical Design Engineer Right to Work: Must have Right to Work - unfortunately our client cannot offer sponsorship at this stage Location: Oxfordshire - 5 days per week on site Position Type: Full-time, Permanent About the Company We are working with a Smart Manufacturing business providing cutting-edge automation solutions across aerospace, medical devices, automotive, and electronic domains. The Role We are looking for a Mechanical Design Engineer to join an experienced team. You will design everything from small retrofit camera assemblies to large-scale industrial automation machinery. Key Responsibilities 3D Design: Create mechanical models, detailed drawings, and schematics in SolidWorks under the Design Lead. Pneumatics: Produce full pneumatic system concepts, component specifications, and schematics. Visualisation: Produce 3D renders of concepts and machines for sales/marketing. System Integration: Specify automation components and design to international engineering standards. Hands-on Delivery: Collaborate with Applications Engineering to deliver projects on time, assisting with hands-on system builds as required. Candidate Requirements Essential: 3+ years designing industrial automation or special-purpose machinery. 3+ years experience with 3D CAD software (preferably SolidWorks). Degree-educated (2:1 or higher) in Mechanical Engineering or a related field. Strong logical problem-solving abilities and high attention to detail. Excellent interpersonal and communication skills with a team-first mindset. Desirable: Integration experience with machine vision technologies. Rendering software skills (Blender, SolidWorks Visualize) or 3D printing experience. Full, clean UK Driving Licence.
Jul 31, 2026
Full time
Mechanical Design Engineer Right to Work: Must have Right to Work - unfortunately our client cannot offer sponsorship at this stage Location: Oxfordshire - 5 days per week on site Position Type: Full-time, Permanent About the Company We are working with a Smart Manufacturing business providing cutting-edge automation solutions across aerospace, medical devices, automotive, and electronic domains. The Role We are looking for a Mechanical Design Engineer to join an experienced team. You will design everything from small retrofit camera assemblies to large-scale industrial automation machinery. Key Responsibilities 3D Design: Create mechanical models, detailed drawings, and schematics in SolidWorks under the Design Lead. Pneumatics: Produce full pneumatic system concepts, component specifications, and schematics. Visualisation: Produce 3D renders of concepts and machines for sales/marketing. System Integration: Specify automation components and design to international engineering standards. Hands-on Delivery: Collaborate with Applications Engineering to deliver projects on time, assisting with hands-on system builds as required. Candidate Requirements Essential: 3+ years designing industrial automation or special-purpose machinery. 3+ years experience with 3D CAD software (preferably SolidWorks). Degree-educated (2:1 or higher) in Mechanical Engineering or a related field. Strong logical problem-solving abilities and high attention to detail. Excellent interpersonal and communication skills with a team-first mindset. Desirable: Integration experience with machine vision technologies. Rendering software skills (Blender, SolidWorks Visualize) or 3D printing experience. Full, clean UK Driving Licence.
Job Title: Electrical Technician Location: South Yorkshire (UK wide travel) Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries. Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK. About the Role Assemble and wire bespoke electrical control panels and instrumentation systems. Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units. Carry out mechanical assembly of enclosures, frames, and electromechanical systems. Perform electrical testing, including continuity, functional, and fault-finding activities. Install and commission systems at customer sites, including single- and three-phase electrical installations. Complete electrical wiring, cable routing, termination, and equipment installation. Produce and maintain testing records, site reports, RAMS, and engineering documentation. Support workshop operations, stock control, and continuous improvement activities. Work closely with engineers and project teams to deliver high-quality bespoke systems. About You NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline. 18th Edition Wiring Regulations qualification. Previous experience building and wiring electrical control panels or bespoke electrical systems. Ability to read and interpret electrical schematics and engineering drawings. Experience with panel layout, component mounting, cable routing, termination, and panel fabrication. Practical electrical fault-finding and troubleshooting skills. Experience installing and commissioning electrical systems on customer sites. Good IT skills, including Microsoft Office and electronic documentation. Strong understanding of electrical safety regulations and safe working practices. Full UK driving licence and willingness to travel across the UK (approximately 25%). Desirable Skills Experience working with Siemens, Beckhoff, or other PLC-based control hardware. National Instruments (NI) instrumentation experience. City & Guilds 2391 (Inspection & Testing) or equivalent. ECS/JIB Card. AM2 qualification. IPAF and/or PASMA certification. Experience with EPLAN or similar electrical documentation software. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Jul 31, 2026
Full time
Job Title: Electrical Technician Location: South Yorkshire (UK wide travel) Salary: Competitive (DOE) We're partnering with a specialist engineering company that designs and builds bespoke systems for customers across a range of high-technology industries. Due to continued growth, they're looking for an experienced Electrical Technician to join their expanding engineering team. This is a hands-on role involving the assembly, wiring, testing, installation, and commissioning of bespoke systems. Working on a wide variety of custom-built projects, you'll split your time between the workshop and customer sites across the UK. About the Role Assemble and wire bespoke electrical control panels and instrumentation systems. Build 19" rack systems, wiring looms, harnesses, interface boxes, and control units. Carry out mechanical assembly of enclosures, frames, and electromechanical systems. Perform electrical testing, including continuity, functional, and fault-finding activities. Install and commission systems at customer sites, including single- and three-phase electrical installations. Complete electrical wiring, cable routing, termination, and equipment installation. Produce and maintain testing records, site reports, RAMS, and engineering documentation. Support workshop operations, stock control, and continuous improvement activities. Work closely with engineers and project teams to deliver high-quality bespoke systems. About You NVQ Level 3 (or equivalent) in Electrical Installation, Electrical Maintenance, or a related discipline. 18th Edition Wiring Regulations qualification. Previous experience building and wiring electrical control panels or bespoke electrical systems. Ability to read and interpret electrical schematics and engineering drawings. Experience with panel layout, component mounting, cable routing, termination, and panel fabrication. Practical electrical fault-finding and troubleshooting skills. Experience installing and commissioning electrical systems on customer sites. Good IT skills, including Microsoft Office and electronic documentation. Strong understanding of electrical safety regulations and safe working practices. Full UK driving licence and willingness to travel across the UK (approximately 25%). Desirable Skills Experience working with Siemens, Beckhoff, or other PLC-based control hardware. National Instruments (NI) instrumentation experience. City & Guilds 2391 (Inspection & Testing) or equivalent. ECS/JIB Card. AM2 qualification. IPAF and/or PASMA certification. Experience with EPLAN or similar electrical documentation software. Please note, we cannot offer sponsorship for this position. If interested, please send over an updated CV.
Principal FPGA Engineer- North Hykeham (LN6) - Permanent - Hybrid Up to £70,000 depending on experience We re growing our Electronic Warfare Operations Support Group (EWOS), a team of over 60 specialists from a wide range of backgrounds. Our engineers, scientists, and ex-military personnel work together to help our customers achieve the true operational potential and help keep their people and platforms safe. As part of this growth, MASS is looking for an Principal FPGA Engineer to join our modelling team in Lincoln, supporting the delivery of technical excellence on a large, cutting-edge System-of-Systems programme. This is a collaborative, hands on role, suited to someone with strong experience in FPGA design and a passion for developing signal processing systems for complex, real-world challenges. You ll work closely, with cross functional teams, acting as a technical lead in the design and delivery of systems that include RF signal chains, high-speed digital interfaces, and real-time DSP. Your work will influence key architectural decisions, address integration challenges, and help shape the development of reconfigurable hardware platforms for use in mission-critical environments. The invaluable experience you ll bring, to help us achieve more. Define and implement advanced FPGA architectures for RF signal processing, high-throughput data handling, and real-time logic. Develop for AMD/Xilinx RFSoCs (e.g. Zynq UltraScale+) and Intel FPGAs (e.g. Agilex), including integration with high-speed ADCs/DACs. Collaborate with systems, RF, embedded software, and verification engineers to ensure end-to-end performance and compliance. Support test and lab evaluation using signal generators, spectrum analysers, and oscilloscopes. Lead or contribute to the implementation of designs using VHDL, SystemVerilog, and MATLAB/Simulink HDL Coder. Develop low-level C software for FPGA bring-up, test, and integration. Use industry-standard tools such as Vivado, Quartus, and ModelSim for simulation, synthesis, and implementation. Drive design verification, unit testing, and documentation to ensure high-reliability deployment. Act as a technical expert in reviews, solution development, and internal consultation across teams. Essential Experience Proven track record in delivering FPGA designs for real-time, high-speed, or RF-centric systems. Proficiency in VHDL, SystemVerilog, and embedded C for FPGA-host integration, control, and testing. Experience with MATLAB/Simulink and HDL Coder for algorithm-to-hardware workflows. Proven ability to develop and deploy on Xilinx RFSoC (e.g. Zynq UltraScale+) and/or Intel Agilex/Stratix platforms. Expertise with Vivado, Quartus, constraint management, simulation, and timing closure for multi-clock, high-throughput designs. Desirable Experience Experience working with embedded Linux, bare-metal C drivers, or FPGA-based system integration. Familiarity with AXI interfaces, memory interfaces, JESD204B/C, or high-speed ADC/DAC integration. Experience designing streaming architectures using AXI4-Stream, DMA, and memory buffers (e.g. BRAM, URAM). Exposure to real-time signal playback/recording systems, or hardware-in-the-loop (HIL) test environments. Knowledge of bitstream encryption, secure boot, or anti-tamper features in FPGA-based systems. Knowledge of data framing, tagging, and high-throughput IQ data handling. Experience working with synthetic electromagnetic environments and their associated software and hardware requirements and limitations Wellbeing is at the core to our culture, allowing employees to flourish and to achieve their full potential. Our people are important to us, and we take pride in our wellbeing programmes and policies that support individuals, including mental health first aiders and readily available support through our extensive employee assistance programme. Our non-negotiables: Due to the highly secure nature of the projects that you will be involved with, you must be: A UK National and eligible to work in the UK. Eligible to obtain and maintain a UK Government SC-level security clearance Apply today to see how working for MASS could work for you!
Jul 31, 2026
Full time
Principal FPGA Engineer- North Hykeham (LN6) - Permanent - Hybrid Up to £70,000 depending on experience We re growing our Electronic Warfare Operations Support Group (EWOS), a team of over 60 specialists from a wide range of backgrounds. Our engineers, scientists, and ex-military personnel work together to help our customers achieve the true operational potential and help keep their people and platforms safe. As part of this growth, MASS is looking for an Principal FPGA Engineer to join our modelling team in Lincoln, supporting the delivery of technical excellence on a large, cutting-edge System-of-Systems programme. This is a collaborative, hands on role, suited to someone with strong experience in FPGA design and a passion for developing signal processing systems for complex, real-world challenges. You ll work closely, with cross functional teams, acting as a technical lead in the design and delivery of systems that include RF signal chains, high-speed digital interfaces, and real-time DSP. Your work will influence key architectural decisions, address integration challenges, and help shape the development of reconfigurable hardware platforms for use in mission-critical environments. The invaluable experience you ll bring, to help us achieve more. Define and implement advanced FPGA architectures for RF signal processing, high-throughput data handling, and real-time logic. Develop for AMD/Xilinx RFSoCs (e.g. Zynq UltraScale+) and Intel FPGAs (e.g. Agilex), including integration with high-speed ADCs/DACs. Collaborate with systems, RF, embedded software, and verification engineers to ensure end-to-end performance and compliance. Support test and lab evaluation using signal generators, spectrum analysers, and oscilloscopes. Lead or contribute to the implementation of designs using VHDL, SystemVerilog, and MATLAB/Simulink HDL Coder. Develop low-level C software for FPGA bring-up, test, and integration. Use industry-standard tools such as Vivado, Quartus, and ModelSim for simulation, synthesis, and implementation. Drive design verification, unit testing, and documentation to ensure high-reliability deployment. Act as a technical expert in reviews, solution development, and internal consultation across teams. Essential Experience Proven track record in delivering FPGA designs for real-time, high-speed, or RF-centric systems. Proficiency in VHDL, SystemVerilog, and embedded C for FPGA-host integration, control, and testing. Experience with MATLAB/Simulink and HDL Coder for algorithm-to-hardware workflows. Proven ability to develop and deploy on Xilinx RFSoC (e.g. Zynq UltraScale+) and/or Intel Agilex/Stratix platforms. Expertise with Vivado, Quartus, constraint management, simulation, and timing closure for multi-clock, high-throughput designs. Desirable Experience Experience working with embedded Linux, bare-metal C drivers, or FPGA-based system integration. Familiarity with AXI interfaces, memory interfaces, JESD204B/C, or high-speed ADC/DAC integration. Experience designing streaming architectures using AXI4-Stream, DMA, and memory buffers (e.g. BRAM, URAM). Exposure to real-time signal playback/recording systems, or hardware-in-the-loop (HIL) test environments. Knowledge of bitstream encryption, secure boot, or anti-tamper features in FPGA-based systems. Knowledge of data framing, tagging, and high-throughput IQ data handling. Experience working with synthetic electromagnetic environments and their associated software and hardware requirements and limitations Wellbeing is at the core to our culture, allowing employees to flourish and to achieve their full potential. Our people are important to us, and we take pride in our wellbeing programmes and policies that support individuals, including mental health first aiders and readily available support through our extensive employee assistance programme. Our non-negotiables: Due to the highly secure nature of the projects that you will be involved with, you must be: A UK National and eligible to work in the UK. Eligible to obtain and maintain a UK Government SC-level security clearance Apply today to see how working for MASS could work for you!
