Senior Metrology Engineer Location: Near Woking, Surrey Working Pattern: Primarily office-based, with UK and occasional international travel Salary: From £40,000, dependent on experience Hours: Monday to Friday, typically 9:00am to 5:15pm, with flexible start and finish times Benefits for Senior Metrology Engineer • Competitive salary • Company-wide commission scheme • 24 days annual leave plus bank holidays • Workplace pension scheme • Free on-site parking • On-site gym and wellbeing activities • UK and occasional international travel • Long-term role within a specialist measurement technology business Introduction for Senior Metrology Engineer Industrial Connected Talent is supporting a specialist measurement technology business in the search for an experienced Senior Metrology Engineer. This is a senior technical role focused on dimensional measurement, vision-based metrology systems and customer application support. You will act as a key technical resource for customers, sales teams and internal product development. Responsibilities for Senior Metrology Engineer As Senior Metrology Engineer, you will provide technical expertise across measurement applications, system setup, calibration and product development. You will work with both hardware and software, helping customers achieve accurate and repeatable results. • Provide expert support on dimensional measurement and vision-based metrology • Set up, test and calibrate optical and vision measurement systems • Advise customers on measurement methods, tolerances and accuracy • Support demonstrations, training and technical problem-solving • Work with design teams to support new product development • Mentor less experienced engineers within the metrology team • Travel to customer sites in the UK and occasionally overseas Requirements for Senior Metrology Engineer The ideal candidate will have at least five years experience within metrology, dimensional inspection or measurement applications. You should understand the principles behind measurement accuracy, tolerances and repeatability, rather than simply operating equipment. • At least five years experience in metrology or dimensional inspection • Strong understanding of measurement principles, tolerances and accuracy • Experience with optical, vision-based or non-contact measurement systems • Ability to interpret engineering drawings and advise on measurement methods • Practical experience setting up or calibrating measurement equipment • Strong customer-facing communication and technical problem-solving skills • Willingness to work primarily on-site near Woking and travel when required Desirable Experience for Senior Metrology Engineer • Experience using MetLogix M3 software • Background with vision systems, optical comparators or CMM equipment • Experience in an Applications Engineer, Metrology Engineer or technical Service Engineer role • Product development or design engineering support experience
Jul 31, 2026
Full time
Senior Metrology Engineer Location: Near Woking, Surrey Working Pattern: Primarily office-based, with UK and occasional international travel Salary: From £40,000, dependent on experience Hours: Monday to Friday, typically 9:00am to 5:15pm, with flexible start and finish times Benefits for Senior Metrology Engineer • Competitive salary • Company-wide commission scheme • 24 days annual leave plus bank holidays • Workplace pension scheme • Free on-site parking • On-site gym and wellbeing activities • UK and occasional international travel • Long-term role within a specialist measurement technology business Introduction for Senior Metrology Engineer Industrial Connected Talent is supporting a specialist measurement technology business in the search for an experienced Senior Metrology Engineer. This is a senior technical role focused on dimensional measurement, vision-based metrology systems and customer application support. You will act as a key technical resource for customers, sales teams and internal product development. Responsibilities for Senior Metrology Engineer As Senior Metrology Engineer, you will provide technical expertise across measurement applications, system setup, calibration and product development. You will work with both hardware and software, helping customers achieve accurate and repeatable results. • Provide expert support on dimensional measurement and vision-based metrology • Set up, test and calibrate optical and vision measurement systems • Advise customers on measurement methods, tolerances and accuracy • Support demonstrations, training and technical problem-solving • Work with design teams to support new product development • Mentor less experienced engineers within the metrology team • Travel to customer sites in the UK and occasionally overseas Requirements for Senior Metrology Engineer The ideal candidate will have at least five years experience within metrology, dimensional inspection or measurement applications. You should understand the principles behind measurement accuracy, tolerances and repeatability, rather than simply operating equipment. • At least five years experience in metrology or dimensional inspection • Strong understanding of measurement principles, tolerances and accuracy • Experience with optical, vision-based or non-contact measurement systems • Ability to interpret engineering drawings and advise on measurement methods • Practical experience setting up or calibrating measurement equipment • Strong customer-facing communication and technical problem-solving skills • Willingness to work primarily on-site near Woking and travel when required Desirable Experience for Senior Metrology Engineer • Experience using MetLogix M3 software • Background with vision systems, optical comparators or CMM equipment • Experience in an Applications Engineer, Metrology Engineer or technical Service Engineer role • Product development or design engineering support experience
Are you a Principal Software Engineer with a strong background in DSP, embedded software and developing 5G communications applications? If so I'd like to speak with you! A well-established R&D organisation and market leader is looking to rapidly expand its engineering team and is seeking a Principal Software Engineer to provide technical leadership within its development team near Leicestershire. As a Principal Software Engineer, you will take technical ownership of complex embedded software and DSP development activities, supporting the design and implementation of advanced communications systems. The successful candidate will bring strong embedded/bare-metal software experience, a deep understanding of digital signal processing, and proven capability in implementing communication signal processing algorithms such as DDCs, filters and FFTs. Skills/Experience required for the Principal Software Engineer job based near Leicestershire include: BEng/BSc or MSc/MEng within Engineering, ideally Electronics, Telecommunications, Software Engineering or a similar discipline Significant experience in DSP algorithm simulation, embedded software development and 5G communications systems Strong expertise in bare-metal and embedded C development, with the ability to guide architecture and implementation decisions Experience developing and debugging software in Linux-based environments Proven ability to provide technical leadership, mentor engineers and influence software design across the full development lifecycle Experience of the following would be advantageous for the Principal Software Engineer job based near Leicestershire: Experience with Yocto-based Board Support Packages Cross compilers, including ARM GCC or similar toolchains FreeRTOS experience Experience with typical embedded control peripherals, such as RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI Cortex M3/M4 Microcontrollers or similar. Experience with the efficient implementation of communications DSP algorithms, such as FFTs, filtering and DDC, including exposure to VHDL This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D. This is a great chance for a Principal Software Engineer to take a senior technical role within a consistently growing technology company, with the opportunity to influence product direction, support engineering best practice and contribute to the development of advanced communications technology. To apply for the Principal Software Engineer job, please send your CV to Kyle Graveney removed) or call on (phone number removed)
Jul 31, 2026
Full time
Are you a Principal Software Engineer with a strong background in DSP, embedded software and developing 5G communications applications? If so I'd like to speak with you! A well-established R&D organisation and market leader is looking to rapidly expand its engineering team and is seeking a Principal Software Engineer to provide technical leadership within its development team near Leicestershire. As a Principal Software Engineer, you will take technical ownership of complex embedded software and DSP development activities, supporting the design and implementation of advanced communications systems. The successful candidate will bring strong embedded/bare-metal software experience, a deep understanding of digital signal processing, and proven capability in implementing communication signal processing algorithms such as DDCs, filters and FFTs. Skills/Experience required for the Principal Software Engineer job based near Leicestershire include: BEng/BSc or MSc/MEng within Engineering, ideally Electronics, Telecommunications, Software Engineering or a similar discipline Significant experience in DSP algorithm simulation, embedded software development and 5G communications systems Strong expertise in bare-metal and embedded C development, with the ability to guide architecture and implementation decisions Experience developing and debugging software in Linux-based environments Proven ability to provide technical leadership, mentor engineers and influence software design across the full development lifecycle Experience of the following would be advantageous for the Principal Software Engineer job based near Leicestershire: Experience with Yocto-based Board Support Packages Cross compilers, including ARM GCC or similar toolchains FreeRTOS experience Experience with typical embedded control peripherals, such as RAM, Flash, UART, PWM, A/D, CAN, I2C and SPI Cortex M3/M4 Microcontrollers or similar. Experience with the efficient implementation of communications DSP algorithms, such as FFTs, filtering and DDC, including exposure to VHDL This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D. This is a great chance for a Principal Software Engineer to take a senior technical role within a consistently growing technology company, with the opportunity to influence product direction, support engineering best practice and contribute to the development of advanced communications technology. To apply for the Principal Software Engineer job, please send your CV to Kyle Graveney removed) or call on (phone number removed)
Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries click apply for full job details
Jul 31, 2026
Full time
Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries click apply for full job details
JOB TITLE: Senior Project Manager SALARY: Competitive If you require any additional support or adjustments during the recruitment process, please don't hesitate to contact our Recruitment Department at . We're here to help! The Senior Project Manager will be responsible for overseeing the planning, execution, and delivery of electrical infrastructure projects with emphasis on EV charging stations,. This role combines project management expertise with electrical infrastructure knowledge, ensuring projects are delivered on time, within budget, and to quality and safety standards. The ideal candidate will have experience managing design-build construction, field execution, subcontractor coordination, and utility interfacing. Key Responsibilities Construction Oversight: Manage all phases of construction, including site preparation, installation, commissioning, and closeout. Project Planning: Develop and track schedules, budgets, and resources to ensure project milestones are achieved. Field Coordination: Direct subcontractors, trades, and vendors; conduct site walks and oversee daily operations. Stakeholder Management: Interface with clients, utilities, vendor, AHJs, and internal leadership to align project execution with requirements. Risk Management: Identify project-related risks and proactively implement mitigation strategies. Quality Control: Review drawings, submittals, and as-builts; verify design meets engineering and client specific design specifications. Financial Accountability: Manage contracts and vendor agreements; track construction costs and margins. Reporting: Utilize different project related programs to provide dashboards, progress updates, and reports to leadership and clients. Requirements Education: Bachelors degree in Construction Management, Business Administration, Project Management or related field. Experience: 7-12 years of project/construction management experience in electrical infrastructure, renewable energy, or commercial/industrial construction. Technical Knowledge: Familiarity with EV charging systems, power distribution, microgrids, and utility coordination. Certification: PMP, CCM, or equivalent certification preferred. Tools: Proficiency in SiteTracker, Oracle Unifier, and project scheduling platforms (e.g., MS Project, Primavera). Travel: Ability to travel to project sites (up to 25%). Driver's License: Valid driver's license with a good driving record. Preferred Qualifications Advanced degree (MBA, MS in Project Management, or related). PMP Certification Direct experience with EV charging deployments, microgrid projects, and design-build delivery methods. Knowledge of Procore, MS Project, or other project management platforms. Core Competencies Strong Project Team leadership. Excellent stakeholder and subcontractor coordination abilities. Deep understanding of project planning, design and engineering, construction, scheduling, and logistics. Commitment to safety, quality assurance, and regulatory compliance. Ability to manage multi-site, high-value projects simultaneously. Additional Duties Perform other duties as assigned. Responsibilities may be modified based on project or organizational needs. Benefits We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home Mental Health support and Life Event Counseling Get Fit Programme Financial and legal support Cycle to work scheme Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers Life: Search for resources and tools on topics ranging from family and life to health, money and work Support: Online chat or telephone service for urgent support in a crisis For more information about ABM's benefits, visit our About ABM: ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. For more information, visit . ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
Jul 31, 2026
Full time
JOB TITLE: Senior Project Manager SALARY: Competitive If you require any additional support or adjustments during the recruitment process, please don't hesitate to contact our Recruitment Department at . We're here to help! The Senior Project Manager will be responsible for overseeing the planning, execution, and delivery of electrical infrastructure projects with emphasis on EV charging stations,. This role combines project management expertise with electrical infrastructure knowledge, ensuring projects are delivered on time, within budget, and to quality and safety standards. The ideal candidate will have experience managing design-build construction, field execution, subcontractor coordination, and utility interfacing. Key Responsibilities Construction Oversight: Manage all phases of construction, including site preparation, installation, commissioning, and closeout. Project Planning: Develop and track schedules, budgets, and resources to ensure project milestones are achieved. Field Coordination: Direct subcontractors, trades, and vendors; conduct site walks and oversee daily operations. Stakeholder Management: Interface with clients, utilities, vendor, AHJs, and internal leadership to align project execution with requirements. Risk Management: Identify project-related risks and proactively implement mitigation strategies. Quality Control: Review drawings, submittals, and as-builts; verify design meets engineering and client specific design specifications. Financial Accountability: Manage contracts and vendor agreements; track construction costs and margins. Reporting: Utilize different project related programs to provide dashboards, progress updates, and reports to leadership and clients. Requirements Education: Bachelors degree in Construction Management, Business Administration, Project Management or related field. Experience: 7-12 years of project/construction management experience in electrical infrastructure, renewable energy, or commercial/industrial construction. Technical Knowledge: Familiarity with EV charging systems, power distribution, microgrids, and utility coordination. Certification: PMP, CCM, or equivalent certification preferred. Tools: Proficiency in SiteTracker, Oracle Unifier, and project scheduling platforms (e.g., MS Project, Primavera). Travel: Ability to travel to project sites (up to 25%). Driver's License: Valid driver's license with a good driving record. Preferred Qualifications Advanced degree (MBA, MS in Project Management, or related). PMP Certification Direct experience with EV charging deployments, microgrid projects, and design-build delivery methods. Knowledge of Procore, MS Project, or other project management platforms. Core Competencies Strong Project Team leadership. Excellent stakeholder and subcontractor coordination abilities. Deep understanding of project planning, design and engineering, construction, scheduling, and logistics. Commitment to safety, quality assurance, and regulatory compliance. Ability to manage multi-site, high-value projects simultaneously. Additional Duties Perform other duties as assigned. Responsibilities may be modified based on project or organizational needs. Benefits We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home Mental Health support and Life Event Counseling Get Fit Programme Financial and legal support Cycle to work scheme Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers Life: Search for resources and tools on topics ranging from family and life to health, money and work Support: Online chat or telephone service for urgent support in a crisis For more information about ABM's benefits, visit our About ABM: ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. For more information, visit . ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
Job Description: Location: Prestwick, Ayrshire Hours: 37 hours per week (half day Friday) Type: Full time Grade: E Salary: £42,683 Travel Required: Occasional Work Location: Site based (100%) Security Checks: BPSS, Disclosure Scotland, pre employment medical (including drug and alcohol testing) Join One of Ayrshire's Largest Engineering Employers Prestwick Aerosystems continues Ayrshire's long standing aircraft manufacturing tradition. From our Prestwick site, we manufacture aircraft wing structures used on Airbus commercial aircraft worldwide. Accountable for the management and development of accurate "Bills of Materials" maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes. Deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. Accountable for the Translation of Design Data (For example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. Support the Quality and Engineering Team Leader in discharging the people issues such as the PDR, training/development and the related WTMS responsibilities. How you will contribute to the team You will: • Be responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. • Accountable for the maintenance, development and compilation of detail packages of work and Conditions of Supply for external manufacture with suppliers. • Responsible for Continuous Improvement to achieve significant productivity and quality improvements by: - Analysing and eliminating waste (seven wastes). - Developing and implementing production smoothing methods and Kanban systems. - Identifying and implementing methods to reduce set-up and overall cycle times. - Effective use of problem solving tools and techniques. - Work closely with Design to identify and implement cost reduction initiatives and product quality improvements. • Liasing with operators, design and regulatory authorities to ensure product integrity and compliance. Manufacturing Engineering staff through the PDR process. Requirements for the role You will have: • Relevant engineering experience within a Manufacturing Engineering environment • Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc • Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus • A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access What we will offer you • 37 hour working week (half day Friday) • Defined contribution pension (4% employee / 8% employer) • 33 days annual leave (rising with service) • Annual bonus linked to company performance • Life assurance (4 basic salary) • Virtual GP service, Employee • Assistance Programme and wellbeing support • Professional development and training opportunities • Free on site parking What happens next If you're ready to play a key role in supporting our people and operations at Prestwick, apply today. Right to Work in the UK All applicants must have the legal right to work in the UK at the time of application. Prestwick Aerosystems is unable to offer visa sponsorship for this role. Any offer of employment will be subject to satisfactory Right to Work checks, carried out in accordance with UK Government requirements. You will also be required to complete employment references, Disclosure Scotland and a pre employment medical. Prestwick Aerosystems is an equal opportunity employer. We welcome applications from all backgrounds and are committed to building a diverse and inclusive workplace. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Prestwick Aerosystems Limited Employment Type: Permanent - Experience Level: Professional Job Family: Manufacturing Engineering Your application data will be processed by Prestwick Aerosystems and other companies under the control of Airbus for all necessary hiring, vetting, and security checks. This processing is required to assess your suitability for employment. For full details on how and why Airbus uses your data, please see our Privacy Notice . Prestwick Aerosystems is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. As a part of Airbus, Prestwick Aerosystems is committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Prestwick Aerosystems or Airbus to do so should be reported to . At Prestwick Aerosystems, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Jul 31, 2026
Full time
Job Description: Location: Prestwick, Ayrshire Hours: 37 hours per week (half day Friday) Type: Full time Grade: E Salary: £42,683 Travel Required: Occasional Work Location: Site based (100%) Security Checks: BPSS, Disclosure Scotland, pre employment medical (including drug and alcohol testing) Join One of Ayrshire's Largest Engineering Employers Prestwick Aerosystems continues Ayrshire's long standing aircraft manufacturing tradition. From our Prestwick site, we manufacture aircraft wing structures used on Airbus commercial aircraft worldwide. Accountable for the management and development of accurate "Bills of Materials" maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes. Deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. Accountable for the Translation of Design Data (For example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. Support the Quality and Engineering Team Leader in discharging the people issues such as the PDR, training/development and the related WTMS responsibilities. How you will contribute to the team You will: • Be responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. • Accountable for the maintenance, development and compilation of detail packages of work and Conditions of Supply for external manufacture with suppliers. • Responsible for Continuous Improvement to achieve significant productivity and quality improvements by: - Analysing and eliminating waste (seven wastes). - Developing and implementing production smoothing methods and Kanban systems. - Identifying and implementing methods to reduce set-up and overall cycle times. - Effective use of problem solving tools and techniques. - Work closely with Design to identify and implement cost reduction initiatives and product quality improvements. • Liasing with operators, design and regulatory authorities to ensure product integrity and compliance. Manufacturing Engineering staff through the PDR process. Requirements for the role You will have: • Relevant engineering experience within a Manufacturing Engineering environment • Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc • Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus • A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access What we will offer you • 37 hour working week (half day Friday) • Defined contribution pension (4% employee / 8% employer) • 33 days annual leave (rising with service) • Annual bonus linked to company performance • Life assurance (4 basic salary) • Virtual GP service, Employee • Assistance Programme and wellbeing support • Professional development and training opportunities • Free on site parking What happens next If you're ready to play a key role in supporting our people and operations at Prestwick, apply today. Right to Work in the UK All applicants must have the legal right to work in the UK at the time of application. Prestwick Aerosystems is unable to offer visa sponsorship for this role. Any offer of employment will be subject to satisfactory Right to Work checks, carried out in accordance with UK Government requirements. You will also be required to complete employment references, Disclosure Scotland and a pre employment medical. Prestwick Aerosystems is an equal opportunity employer. We welcome applications from all backgrounds and are committed to building a diverse and inclusive workplace. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Prestwick Aerosystems Limited Employment Type: Permanent - Experience Level: Professional Job Family: Manufacturing Engineering Your application data will be processed by Prestwick Aerosystems and other companies under the control of Airbus for all necessary hiring, vetting, and security checks. This processing is required to assess your suitability for employment. For full details on how and why Airbus uses your data, please see our Privacy Notice . Prestwick Aerosystems is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. As a part of Airbus, Prestwick Aerosystems is committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Prestwick Aerosystems or Airbus to do so should be reported to . At Prestwick Aerosystems, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Job Description: Location: Prestwick, Ayrshire Hours: 37 hours per week (half day Friday) Type: Full time Grade: E Salary: £42,683 Travel Required: Occasional Work Location: Site based (100%) Security Checks: BPSS, Disclosure Scotland, pre employment medical (including drug and alcohol testing) Join One of Ayrshire's Largest Engineering Employers Prestwick Aerosystems continues Ayrshire's long standing aircraft manufacturing tradition. From our Prestwick site, we manufacture aircraft wing structures used on Airbus commercial aircraft worldwide. Accountable for the management and development of accurate "Bills of Materials" maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes. Deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. Accountable for the Translation of Design Data (For example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. Support the Quality and Engineering Team Leader in discharging the people issues such as the PDR, training/development and the related WTMS responsibilities. How you will contribute to the team You will: • Be responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. • Accountable for the maintenance, development and compilation of detail packages of work and Conditions of Supply for external manufacture with suppliers. • Responsible for Continuous Improvement to achieve significant productivity and quality improvements by: - Analysing and eliminating waste (seven wastes). - Developing and implementing production smoothing methods and Kanban systems. - Identifying and implementing methods to reduce set-up and overall cycle times. - Effective use of problem solving tools and techniques. - Work closely with Design to identify and implement cost reduction initiatives and product quality improvements. • Liasing with operators, design and regulatory authorities to ensure product integrity and compliance. Manufacturing Engineering staff through the PDR process. Requirements for the role You will have: • Relevant engineering experience within a Manufacturing Engineering environment • Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc • Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus • A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access What we will offer you • 37 hour working week (half day Friday) • Defined contribution pension (4% employee / 8% employer) • 33 days annual leave (rising with service) • Annual bonus linked to company performance • Life assurance (4 basic salary) • Virtual GP service, Employee • Assistance Programme and wellbeing support • Professional development and training opportunities • Free on site parking What happens next If you're ready to play a key role in supporting our people and operations at Prestwick, apply today. Right to Work in the UK All applicants must have the legal right to work in the UK at the time of application. Prestwick Aerosystems is unable to offer visa sponsorship for this role. Any offer of employment will be subject to satisfactory Right to Work checks, carried out in accordance with UK Government requirements. You will also be required to complete employment references, Disclosure Scotland and a pre employment medical. Prestwick Aerosystems is an equal opportunity employer. We welcome applications from all backgrounds and are committed to building a diverse and inclusive workplace. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Prestwick Aerosystems Limited Employment Type: Permanent - Experience Level: Professional Job Family: Manufacturing Engineering Your application data will be processed by Prestwick Aerosystems and other companies under the control of Airbus for all necessary hiring, vetting, and security checks. This processing is required to assess your suitability for employment. For full details on how and why Airbus uses your data, please see our Privacy Notice . Prestwick Aerosystems is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. As a part of Airbus, Prestwick Aerosystems is committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Prestwick Aerosystems or Airbus to do so should be reported to . At Prestwick Aerosystems, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Jul 31, 2026
Full time
Job Description: Location: Prestwick, Ayrshire Hours: 37 hours per week (half day Friday) Type: Full time Grade: E Salary: £42,683 Travel Required: Occasional Work Location: Site based (100%) Security Checks: BPSS, Disclosure Scotland, pre employment medical (including drug and alcohol testing) Join One of Ayrshire's Largest Engineering Employers Prestwick Aerosystems continues Ayrshire's long standing aircraft manufacturing tradition. From our Prestwick site, we manufacture aircraft wing structures used on Airbus commercial aircraft worldwide. Accountable for the management and development of accurate "Bills of Materials" maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes. Deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. Accountable for the Translation of Design Data (For example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. Support the Quality and Engineering Team Leader in discharging the people issues such as the PDR, training/development and the related WTMS responsibilities. How you will contribute to the team You will: • Be responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. • Accountable for the maintenance, development and compilation of detail packages of work and Conditions of Supply for external manufacture with suppliers. • Responsible for Continuous Improvement to achieve significant productivity and quality improvements by: - Analysing and eliminating waste (seven wastes). - Developing and implementing production smoothing methods and Kanban systems. - Identifying and implementing methods to reduce set-up and overall cycle times. - Effective use of problem solving tools and techniques. - Work closely with Design to identify and implement cost reduction initiatives and product quality improvements. • Liasing with operators, design and regulatory authorities to ensure product integrity and compliance. Manufacturing Engineering staff through the PDR process. Requirements for the role You will have: • Relevant engineering experience within a Manufacturing Engineering environment • Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc • Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus • A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access What we will offer you • 37 hour working week (half day Friday) • Defined contribution pension (4% employee / 8% employer) • 33 days annual leave (rising with service) • Annual bonus linked to company performance • Life assurance (4 basic salary) • Virtual GP service, Employee • Assistance Programme and wellbeing support • Professional development and training opportunities • Free on site parking What happens next If you're ready to play a key role in supporting our people and operations at Prestwick, apply today. Right to Work in the UK All applicants must have the legal right to work in the UK at the time of application. Prestwick Aerosystems is unable to offer visa sponsorship for this role. Any offer of employment will be subject to satisfactory Right to Work checks, carried out in accordance with UK Government requirements. You will also be required to complete employment references, Disclosure Scotland and a pre employment medical. Prestwick Aerosystems is an equal opportunity employer. We welcome applications from all backgrounds and are committed to building a diverse and inclusive workplace. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Prestwick Aerosystems Limited Employment Type: Permanent - Experience Level: Professional Job Family: Manufacturing Engineering Your application data will be processed by Prestwick Aerosystems and other companies under the control of Airbus for all necessary hiring, vetting, and security checks. This processing is required to assess your suitability for employment. For full details on how and why Airbus uses your data, please see our Privacy Notice . Prestwick Aerosystems is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. As a part of Airbus, Prestwick Aerosystems is committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Prestwick Aerosystems or Airbus to do so should be reported to . At Prestwick Aerosystems, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
We are looking for a proactive, organised and commercially minded Buyer to join our Procurement team on a 12-month fixed-term contract. This is an excellent opportunity to join a well-established manufacturing business, playing a key role in supporting production through effective supplier management and procurement activities. Working closely with the Senior Buyer and cross-functional teams, you will be responsible for ensuring materials and components are sourced efficiently, delivered on time and meet the required quality and cost objectives. This role offers exposure to new product introduction (NPI), supplier development and continuous improvement initiatives within a fast-paced manufacturing environment. Key responsibilities: Raising, issuing and managing purchase orders to ensure the timely supply of materials and components. Monitoring supplier performance to ensure delivery, quality and cost targets are consistently achieved. Developing and maintaining strong working relationships with both new and existing suppliers. Working closely with Manufacturing Engineering, Production, Quality and Engineering teams to support New Product Introduction (NPI) projects. Attending procurement, planning and cross-functional meetings at the Crawley manufacturing facility. Supporting the Senior Buyer with supplier negotiations, sourcing activities and contract discussions. Identifying opportunities to reduce purchasing costs and improve overall supply chain performance. Conducting supplier benchmarking and market research to ensure a competitive and resilient supply base. Managing supplier invoice queries and resolving purchasing discrepancies in a timely manner. Processing demand requests and ensuring purchasing activities align with production schedules. Maintaining accurate procurement records and ensuring documentation complies with ISO quality management standards. Supporting continuous improvement initiatives across procurement processes. Applying Total Cost of Ownership (TCO) principles when evaluating suppliers and sourcing decisions. Working collaboratively with internal stakeholders to ensure procurement activities support operational and business objectives. Required Experience: A minimum of three years' purchasing or procurement experience within a manufacturing or engineering environment. Previous experience managing supplier relationships and placing purchase orders for manufactured components. Strong commercial awareness with the ability to identify cost-saving opportunities without compromising quality or delivery. Excellent communication and relationship-building skills with both internal stakeholders and external suppliers. The ability to manage multiple priorities and work effectively under pressure. A proactive approach with excellent organisational and problem-solving skills. Good attention to detail and strong administrative accuracy. Experience using Microsoft Dynamics 365 (D365) or a similar ERP/MRP system. Good working knowledge of Microsoft Office, particularly Excel. Desirable Experience Experience supporting New Product Introduction (NPI) projects. Knowledge of supplier performance management and KPI reporting. Familiarity with ISO 9001 quality management systems. Understanding of Lean Manufacturing or Continuous Improvement principles. CIPS qualification or working towards CIPS would be advantageous. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Jul 31, 2026
Full time
We are looking for a proactive, organised and commercially minded Buyer to join our Procurement team on a 12-month fixed-term contract. This is an excellent opportunity to join a well-established manufacturing business, playing a key role in supporting production through effective supplier management and procurement activities. Working closely with the Senior Buyer and cross-functional teams, you will be responsible for ensuring materials and components are sourced efficiently, delivered on time and meet the required quality and cost objectives. This role offers exposure to new product introduction (NPI), supplier development and continuous improvement initiatives within a fast-paced manufacturing environment. Key responsibilities: Raising, issuing and managing purchase orders to ensure the timely supply of materials and components. Monitoring supplier performance to ensure delivery, quality and cost targets are consistently achieved. Developing and maintaining strong working relationships with both new and existing suppliers. Working closely with Manufacturing Engineering, Production, Quality and Engineering teams to support New Product Introduction (NPI) projects. Attending procurement, planning and cross-functional meetings at the Crawley manufacturing facility. Supporting the Senior Buyer with supplier negotiations, sourcing activities and contract discussions. Identifying opportunities to reduce purchasing costs and improve overall supply chain performance. Conducting supplier benchmarking and market research to ensure a competitive and resilient supply base. Managing supplier invoice queries and resolving purchasing discrepancies in a timely manner. Processing demand requests and ensuring purchasing activities align with production schedules. Maintaining accurate procurement records and ensuring documentation complies with ISO quality management standards. Supporting continuous improvement initiatives across procurement processes. Applying Total Cost of Ownership (TCO) principles when evaluating suppliers and sourcing decisions. Working collaboratively with internal stakeholders to ensure procurement activities support operational and business objectives. Required Experience: A minimum of three years' purchasing or procurement experience within a manufacturing or engineering environment. Previous experience managing supplier relationships and placing purchase orders for manufactured components. Strong commercial awareness with the ability to identify cost-saving opportunities without compromising quality or delivery. Excellent communication and relationship-building skills with both internal stakeholders and external suppliers. The ability to manage multiple priorities and work effectively under pressure. A proactive approach with excellent organisational and problem-solving skills. Good attention to detail and strong administrative accuracy. Experience using Microsoft Dynamics 365 (D365) or a similar ERP/MRP system. Good working knowledge of Microsoft Office, particularly Excel. Desirable Experience Experience supporting New Product Introduction (NPI) projects. Knowledge of supplier performance management and KPI reporting. Familiarity with ISO 9001 quality management systems. Understanding of Lean Manufacturing or Continuous Improvement principles. CIPS qualification or working towards CIPS would be advantageous. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
WHAT IS IN IT FOR YOU? Annual Salary circa £38K per annum Permanent role Scunthorpe location 36.5 hours, Monday - Friday Defined contribution company pension scheme 27 personal annual leave days + statutory bank holidays Life Assurance A comprehensive Company sick pay scheme Health Cash Plan via our partnership with Simply health Employee Assistance Programme Family friendly benefits including enhanced maternity, paternity, and adoption leave. THE BUSINESS Our client is a leading European steel manufacturer, supplying premium products around the world. They take great pride in their history and heritage. Not many companies can claim to have generations of families dedicating their working lives to one company, one industry. They are a true market leader, global brand and household name. We are seeking to recruit an Asbestos Surveyor to work within the busy facility within Scunthorpe. As an Asbestos Surveyor, you will play a key role in managing our site s asbestos database, conducting bulk sampling, and carrying out essential statutory inspections. You ll also be responsible for managing asbestos surveys across various operations, including refurbishment and demolition projects. Your expertise will be essential in helping us prevent asbestos exposure, ensuring compliance with the Control of Asbestos Regulations 2012, and supporting the health and safety of our workforce. THE ROLE Conduct asbestos management, refurbishment, and demolition surveys, producing detailed technical reports. Manage and maintain the asbestos database, ensuring all data is up-to-date and accurate. Provide bulk asbestos sampling and liaise with our UKAS asbestos analysis laboratory. Advise and support plant areas on all aspects of asbestos management and compliance. Work closely with contractors and external service providers to ensure ongoing regulatory compliance. Collaborate with senior leaders and other stakeholders to ensure that asbestos management strategies are aligned with company goals. Assist with H&S auditing and participate in safety conversations to maintain a proactive safety culture. Provide training to plant personnel, ensuring they remain competent and compliant with regulations. THE PERSON BOHS P402 qualification (or equivalent). A full UK driving license BOHS P403, BOHS P404, or BOHS S301/W504 (desirable) Minimum 2 years of experience in asbestos surveying. Analytical with a keen eye for detail. Previous experience in an industrial/manufacturing environment is highly advantageous Strong computer literacy with a willingness to learn new IT systems. Ability to make informed decisions and communicate potential challenges to key decision-makers. Eagerness to expand knowledge and grow within other areas of Occupational Hygiene. TO APPLY Please send your updated CV to Tony Hutchinson or apply direct by calling Westray Recruitment Group
Jul 31, 2026
Full time
WHAT IS IN IT FOR YOU? Annual Salary circa £38K per annum Permanent role Scunthorpe location 36.5 hours, Monday - Friday Defined contribution company pension scheme 27 personal annual leave days + statutory bank holidays Life Assurance A comprehensive Company sick pay scheme Health Cash Plan via our partnership with Simply health Employee Assistance Programme Family friendly benefits including enhanced maternity, paternity, and adoption leave. THE BUSINESS Our client is a leading European steel manufacturer, supplying premium products around the world. They take great pride in their history and heritage. Not many companies can claim to have generations of families dedicating their working lives to one company, one industry. They are a true market leader, global brand and household name. We are seeking to recruit an Asbestos Surveyor to work within the busy facility within Scunthorpe. As an Asbestos Surveyor, you will play a key role in managing our site s asbestos database, conducting bulk sampling, and carrying out essential statutory inspections. You ll also be responsible for managing asbestos surveys across various operations, including refurbishment and demolition projects. Your expertise will be essential in helping us prevent asbestos exposure, ensuring compliance with the Control of Asbestos Regulations 2012, and supporting the health and safety of our workforce. THE ROLE Conduct asbestos management, refurbishment, and demolition surveys, producing detailed technical reports. Manage and maintain the asbestos database, ensuring all data is up-to-date and accurate. Provide bulk asbestos sampling and liaise with our UKAS asbestos analysis laboratory. Advise and support plant areas on all aspects of asbestos management and compliance. Work closely with contractors and external service providers to ensure ongoing regulatory compliance. Collaborate with senior leaders and other stakeholders to ensure that asbestos management strategies are aligned with company goals. Assist with H&S auditing and participate in safety conversations to maintain a proactive safety culture. Provide training to plant personnel, ensuring they remain competent and compliant with regulations. THE PERSON BOHS P402 qualification (or equivalent). A full UK driving license BOHS P403, BOHS P404, or BOHS S301/W504 (desirable) Minimum 2 years of experience in asbestos surveying. Analytical with a keen eye for detail. Previous experience in an industrial/manufacturing environment is highly advantageous Strong computer literacy with a willingness to learn new IT systems. Ability to make informed decisions and communicate potential challenges to key decision-makers. Eagerness to expand knowledge and grow within other areas of Occupational Hygiene. TO APPLY Please send your updated CV to Tony Hutchinson or apply direct by calling Westray Recruitment Group
Expleo is seeking an experienced AI Practice Lead to establish, grow, and lead our AI consulting and delivery capability across BFSI, Energy & Utilities, and Diversified Industries. This strategic leadership role will shape Expleo's AI vision, build market-leading offerings, mentor highperforming teams, and help clients unlock measurable business value through AI-driven transformation. The successful candidate will combine deep technical expertise with strong consulting and stakeholder management skills, enabling them to engage senior executives while providing practical guidance on the design and delivery of enterprise AI solutions. A senior consulting and technology leader with strong executive presence, deep expertise in Artificial Intelligence and modern data ecosystems, and a proven track record of shaping and delivering large-scale AI transformation programmes. The successful candidate will be comfortable engaging C-suite and senior stakeholders, defining AI strategies, building high-performing teams, and leading complex transformation initiatives across Banking, Financial Services, Insurance, Energy, and Utilities clients. They will combine strategic consulting capability with sufficient technical depth to provide architectural guidance and assurance when required. Lead and grow Expleo's AI Practice Drive strategy, market positioning, capability development, revenue growth, and delivery excellence across BFSI, Energy & Utilities, and Diversified Industries. Shape enterprise AI strategies and transformation programmes Partner with senior client stakeholders to shape and deliver Data, AI and Digital Transformation strategies aligned to measurable business outcomes. Lead AI opportunity discovery and roadmap development Run opportunity discovery workshops, identify high-value use cases, build business cases, and define practical implementation roadmaps. Provide technical leadership across AI technologies Lead across modern AI architectures, Generative AI, Agentic AI, LLMs, RAG, Data Platforms, Cloud AI Services, and enterprise integration patterns. Remain hands-on where required Provide architectural guidance, technical assurance, innovation leadership, and support the resolution of complex delivery challenges. Develop AI offerings and thought leadership Develop industry-specific AI solutions, accelerators, partnerships, thought leadership, and reusable assets. Support business growth and solution shaping Support consultative business development, executive stakeholder engagement, solution shaping, and strategic Data & AI opportunities. Ensure successful programme delivery Ensure strong governance, quality, scalability, business outcomes, and customer satisfaction across Data & AI programmes. Build and develop high-performing teams Build, mentor, and lead AI consultants, architects, data specialists, and engineers, fostering innovation and continuous learning.
Jul 31, 2026
Full time
Expleo is seeking an experienced AI Practice Lead to establish, grow, and lead our AI consulting and delivery capability across BFSI, Energy & Utilities, and Diversified Industries. This strategic leadership role will shape Expleo's AI vision, build market-leading offerings, mentor highperforming teams, and help clients unlock measurable business value through AI-driven transformation. The successful candidate will combine deep technical expertise with strong consulting and stakeholder management skills, enabling them to engage senior executives while providing practical guidance on the design and delivery of enterprise AI solutions. A senior consulting and technology leader with strong executive presence, deep expertise in Artificial Intelligence and modern data ecosystems, and a proven track record of shaping and delivering large-scale AI transformation programmes. The successful candidate will be comfortable engaging C-suite and senior stakeholders, defining AI strategies, building high-performing teams, and leading complex transformation initiatives across Banking, Financial Services, Insurance, Energy, and Utilities clients. They will combine strategic consulting capability with sufficient technical depth to provide architectural guidance and assurance when required. Lead and grow Expleo's AI Practice Drive strategy, market positioning, capability development, revenue growth, and delivery excellence across BFSI, Energy & Utilities, and Diversified Industries. Shape enterprise AI strategies and transformation programmes Partner with senior client stakeholders to shape and deliver Data, AI and Digital Transformation strategies aligned to measurable business outcomes. Lead AI opportunity discovery and roadmap development Run opportunity discovery workshops, identify high-value use cases, build business cases, and define practical implementation roadmaps. Provide technical leadership across AI technologies Lead across modern AI architectures, Generative AI, Agentic AI, LLMs, RAG, Data Platforms, Cloud AI Services, and enterprise integration patterns. Remain hands-on where required Provide architectural guidance, technical assurance, innovation leadership, and support the resolution of complex delivery challenges. Develop AI offerings and thought leadership Develop industry-specific AI solutions, accelerators, partnerships, thought leadership, and reusable assets. Support business growth and solution shaping Support consultative business development, executive stakeholder engagement, solution shaping, and strategic Data & AI opportunities. Ensure successful programme delivery Ensure strong governance, quality, scalability, business outcomes, and customer satisfaction across Data & AI programmes. Build and develop high-performing teams Build, mentor, and lead AI consultants, architects, data specialists, and engineers, fostering innovation and continuous learning.
Our client, a growing engineering consultancy is currently seeking an experienced Operations Management professional with a strong finance background to join their team. This is a key, hands-on finance role forming the most senior dedicated finance position in the business. You will take ownership of day-to-day financial operations while delivering accurate, insightful management reporting across both company and group levels. Key Responsibilities: Preparation of monthly management accounts, including consolidated P&L reporting at company and group level, with supporting analysis and commentary Production of project and departmental P&L reporting, supporting margin tracking, cost control, and performance analysis across live workstreams Assistance in maintaining and developing group-level reporting, ensuring consistency and visibility across the business Ownership of core accounting processes including journals, reconciliations, accruals and prepayments, ensuring integrity of financial data Day-to-day support and oversight of the Bookkeeper, ensuring accuracy across purchase ledger, sales ledger and banking processes Coordination of payroll processing alongside the Bookkeeper and external providers, ensuring accuracy, compliance and timely submission Preparation and submission oversight of VAT and CIS returns, ensuring compliance with HMRC requirements and deadlines Support cash flow monitoring and forecasting, providing timely insight to support business planning and operational decision-making Work closely with Directors and operational teams to provide financial insight, improve commercial awareness, and support informed decision-making Act as a key point of contact for external accountants, HMRC, and other financial stakeholders where required Continuously identify and implement improvements to financial systems, reporting processes, and internal controls Job Requirements: Experience in a Management Accountant or similar role, ideally within an SME, engineering, construction or project-led environment Fully qualified (ACCA, CIMA, ACA, FCCA) or qualified by experience with strong technical grounding Strong understanding of management accounting, including P&L ownership, reconciliations, accrual accounting and financial controls Confident using accounting systems (e.g. Xero) with strong Excel capability Experience supporting project costing, margin analysis, and performance reporting Strong ability to manage multiple deadlines and priorities in a fast-moving environment Ability to present financial information clearly and confidently to non-finance stakeholders High level of accuracy and consistency across reporting and financial processes If you are an experienced Management Accountant or Finance Manager professional and looking to further develop your career, we would love to hear from you. Apply now to join our client's dynamic and talented team.
Jul 31, 2026
Full time
Our client, a growing engineering consultancy is currently seeking an experienced Operations Management professional with a strong finance background to join their team. This is a key, hands-on finance role forming the most senior dedicated finance position in the business. You will take ownership of day-to-day financial operations while delivering accurate, insightful management reporting across both company and group levels. Key Responsibilities: Preparation of monthly management accounts, including consolidated P&L reporting at company and group level, with supporting analysis and commentary Production of project and departmental P&L reporting, supporting margin tracking, cost control, and performance analysis across live workstreams Assistance in maintaining and developing group-level reporting, ensuring consistency and visibility across the business Ownership of core accounting processes including journals, reconciliations, accruals and prepayments, ensuring integrity of financial data Day-to-day support and oversight of the Bookkeeper, ensuring accuracy across purchase ledger, sales ledger and banking processes Coordination of payroll processing alongside the Bookkeeper and external providers, ensuring accuracy, compliance and timely submission Preparation and submission oversight of VAT and CIS returns, ensuring compliance with HMRC requirements and deadlines Support cash flow monitoring and forecasting, providing timely insight to support business planning and operational decision-making Work closely with Directors and operational teams to provide financial insight, improve commercial awareness, and support informed decision-making Act as a key point of contact for external accountants, HMRC, and other financial stakeholders where required Continuously identify and implement improvements to financial systems, reporting processes, and internal controls Job Requirements: Experience in a Management Accountant or similar role, ideally within an SME, engineering, construction or project-led environment Fully qualified (ACCA, CIMA, ACA, FCCA) or qualified by experience with strong technical grounding Strong understanding of management accounting, including P&L ownership, reconciliations, accrual accounting and financial controls Confident using accounting systems (e.g. Xero) with strong Excel capability Experience supporting project costing, margin analysis, and performance reporting Strong ability to manage multiple deadlines and priorities in a fast-moving environment Ability to present financial information clearly and confidently to non-finance stakeholders High level of accuracy and consistency across reporting and financial processes If you are an experienced Management Accountant or Finance Manager professional and looking to further develop your career, we would love to hear from you. Apply now to join our client's dynamic and talented team.
About The Role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced Customer Service Agent/Helpdesk Agent to be a key part of our Egham team, taking full responsibility for maintaining high levels of customer service and support for dedicated key accounts. Due to the nature of the Support Services business many of theses areas are subject to SLA s, key performance indicators and balanced scorecard assessments. Developing and sustaining excellent customer relations whilst ensuring the commercial impact of accounts are upheld, are the primary objective of the role. This is an exciting opportunity for an exceptional, experienced Customer Service Agent/Helpdesk Agent to join an established operation with scope to drive and enhance the service at every opportunity. This role works on fortnightly shift pattern, working 40 hours per week, 9 hours a day with shift patterns between 7am-7pm and is office based. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Single point of contact to meet the communication needs of key international customers. Ownership of cases throughout their lifecycle and through to completion. Case diagnosis and first line qualification of issues before call out. Ensure cases are restored for service within SLA. Central point of contact between international customers and proAV suppliers. Booking of engineering resource / Logistics / Travel / Critical spares etc. Raising of accurate escalations in a timely manner. Booking of preventative maintenance visits. Engagement with other proAV departments. Person specification: Accurate recording of calls and customer/contract requirements Effective action and follow-up of required activities A meticulous attention to detail Administration and organizational skills Commercial awareness Excellent customer relations and interpersonal skills Ability to take responsibility. Desirable skills: Experience of incident-based ticketing systems Experience of CRM systems, (ideally Microsoft Dynamics) Experience of SAP Experience of working in an AV / VC technology arena Previous Customer Service experience Weekly touch-point meeting, reports and chairing of conference calls. About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equality, Diversity & Inclusion: proAV is an equal opportunity employer that is committed to supporting and promoting an inclusive culture for all employees and job applicants. We want everyone to feel comfortable being themselves and create a culture where we understand and respect each other s differences. proAV does not tolerate discrimination based on age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We make employment decision based on the needs of our business and the qualifications and/or experience of the individual. proAV offers personal and professional development opportunities, not just through traditional qualifications, but also through Apprenticeship schemes, internal training and mentorship programmes. We support employees and job applicants with their work-life balance through our family friendly policies and practices. We encourage all to apply.
Jul 31, 2026
Full time
About The Role Role Overview: proAV are a leading global audio visual integrator, providing AV and event services across multiple client partnerships globally. Our immediate requirement is for an experienced Customer Service Agent/Helpdesk Agent to be a key part of our Egham team, taking full responsibility for maintaining high levels of customer service and support for dedicated key accounts. Due to the nature of the Support Services business many of theses areas are subject to SLA s, key performance indicators and balanced scorecard assessments. Developing and sustaining excellent customer relations whilst ensuring the commercial impact of accounts are upheld, are the primary objective of the role. This is an exciting opportunity for an exceptional, experienced Customer Service Agent/Helpdesk Agent to join an established operation with scope to drive and enhance the service at every opportunity. This role works on fortnightly shift pattern, working 40 hours per week, 9 hours a day with shift patterns between 7am-7pm and is office based. Experience and seniority of the position will be reflected by the remuneration and benefits package. Key Responsibilities: Single point of contact to meet the communication needs of key international customers. Ownership of cases throughout their lifecycle and through to completion. Case diagnosis and first line qualification of issues before call out. Ensure cases are restored for service within SLA. Central point of contact between international customers and proAV suppliers. Booking of engineering resource / Logistics / Travel / Critical spares etc. Raising of accurate escalations in a timely manner. Booking of preventative maintenance visits. Engagement with other proAV departments. Person specification: Accurate recording of calls and customer/contract requirements Effective action and follow-up of required activities A meticulous attention to detail Administration and organizational skills Commercial awareness Excellent customer relations and interpersonal skills Ability to take responsibility. Desirable skills: Experience of incident-based ticketing systems Experience of CRM systems, (ideally Microsoft Dynamics) Experience of SAP Experience of working in an AV / VC technology arena Previous Customer Service experience Weekly touch-point meeting, reports and chairing of conference calls. About Us: proAV designs, integrates and supports blended technology solutions with AV, UC and beyond including end-to-end services and 24/7/365 support to enhance global collaboration and empower your world of communication. From reviewing technology to integration to post-deployment support, you re in safe hands when you trust your AV and UC to proAV. We are recognised as one of the AV industry s most powerful international delivery and support operations trusted by a varied client base in more than 80 countries across 6 continents. To date, we have completed 700+ projects outside of the UK that meets the demands and challenges of a globalised marketplace, keeping the lines of communication and collaboration open. From our state-of-the-art Customer Services Centre and Video Network Operations Centre (VNOC) our dedicated teams manage, monitor and protect our global clients business-critical AV systems architecture, products and technologies 24/7/365. Equality, Diversity & Inclusion: proAV is an equal opportunity employer that is committed to supporting and promoting an inclusive culture for all employees and job applicants. We want everyone to feel comfortable being themselves and create a culture where we understand and respect each other s differences. proAV does not tolerate discrimination based on age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. We make employment decision based on the needs of our business and the qualifications and/or experience of the individual. proAV offers personal and professional development opportunities, not just through traditional qualifications, but also through Apprenticeship schemes, internal training and mentorship programmes. We support employees and job applicants with their work-life balance through our family friendly policies and practices. We encourage all to apply.
Consultant - Technology Strategy Aerospace / Automotive / General Engineering Competitive Salary Plus Benefits Fully Remote Working As a Consultant Technology Strategy , you will lead complex consulting engagements, working closely with clients across the aerospace, defence, space and advanced manufacturing sectors to solve high-value strategic and technical challenges. This is a highly visible, client-facing position where market research and analysis, technology strategy, and strategic planning combine with practical delivery to help organisations improve competitiveness, accelerate innovation, and optimise the way they design, develop and manufacture products, components and systems. Working with senior client stakeholders, you will advise on technology roadmaps, manufacturing strategy, capability assessments, supply chain optimisation, investment decisions, and technical due diligence. Your recommendations will enable clients to maximise performance, reduce waste, improve efficiency, and successfully commercialise new technologies. As a Consultant - Technology Strategy you will: Lead as Project Lead or Deputy Project Manager on strategic consulting engagements, owning delivery for time, cost, quality, and client value as part of the Consultant-Technology Strategy team. Run complex workstreams across technology strategy, capability and manufacturing assessments, market and supply chain analysis, and product development support within Consultant-Technology Strategy. Act as the day-to-day client interface for assigned accounts, building trust, driving excellence, and supporting future wins as a Consultant-Technology Strategy professional. Develop and quality-assure analytical assets, including frameworks for TRL/MRL evaluation and technical due diligence processes. Support practice capability build-out by creating repeatable tools, structuring high-quality databases, and contributing to thought leadership. Supervise and develop Senior Analysts and Analysts, and coordinate Associate Consulting Partners on defined work packages in this Consultant-Technology Strategy role. As a Consultant - Technology Strategy you will have: A Master's degree or higher in Engineering, Technology, or a relevant discipline, aligned with Consultant-Technology Strategy. 5 to 8 years of experience in consulting, strategy, engineering, or advanced R&D, ideally across mobility, aerospace, automotive, or government sectors. Proven ability to lead multi-disciplinary workstreams and guide junior colleagues, bringing clarity and structure as a Consultant-Technology Strategy leader. Strong understanding of technology development lifecycles (including TRL/MRL), manufacturing and industrialisation environments, and competitiveness analysis. High proficiency in Excel, PowerPoint, Word, and Microsoft Project, with excellent analytical structuring skills. This Consultant-Technology Strategy role directly supports the company's growth by strengthening consulting delivery, enhancing project-level client outcomes, and building scalable capabilities that enable longer-term partnerships and business development. Location: The role is based in the UK being fully remote, supporting consulting engagements across multiple client projects. Interested?: If you're excited by the blend of strategic consulting, technical leadership, and team development offered through this Consultant-Technology Strategy position, apply now to take the next step. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 31, 2026
Full time
Consultant - Technology Strategy Aerospace / Automotive / General Engineering Competitive Salary Plus Benefits Fully Remote Working As a Consultant Technology Strategy , you will lead complex consulting engagements, working closely with clients across the aerospace, defence, space and advanced manufacturing sectors to solve high-value strategic and technical challenges. This is a highly visible, client-facing position where market research and analysis, technology strategy, and strategic planning combine with practical delivery to help organisations improve competitiveness, accelerate innovation, and optimise the way they design, develop and manufacture products, components and systems. Working with senior client stakeholders, you will advise on technology roadmaps, manufacturing strategy, capability assessments, supply chain optimisation, investment decisions, and technical due diligence. Your recommendations will enable clients to maximise performance, reduce waste, improve efficiency, and successfully commercialise new technologies. As a Consultant - Technology Strategy you will: Lead as Project Lead or Deputy Project Manager on strategic consulting engagements, owning delivery for time, cost, quality, and client value as part of the Consultant-Technology Strategy team. Run complex workstreams across technology strategy, capability and manufacturing assessments, market and supply chain analysis, and product development support within Consultant-Technology Strategy. Act as the day-to-day client interface for assigned accounts, building trust, driving excellence, and supporting future wins as a Consultant-Technology Strategy professional. Develop and quality-assure analytical assets, including frameworks for TRL/MRL evaluation and technical due diligence processes. Support practice capability build-out by creating repeatable tools, structuring high-quality databases, and contributing to thought leadership. Supervise and develop Senior Analysts and Analysts, and coordinate Associate Consulting Partners on defined work packages in this Consultant-Technology Strategy role. As a Consultant - Technology Strategy you will have: A Master's degree or higher in Engineering, Technology, or a relevant discipline, aligned with Consultant-Technology Strategy. 5 to 8 years of experience in consulting, strategy, engineering, or advanced R&D, ideally across mobility, aerospace, automotive, or government sectors. Proven ability to lead multi-disciplinary workstreams and guide junior colleagues, bringing clarity and structure as a Consultant-Technology Strategy leader. Strong understanding of technology development lifecycles (including TRL/MRL), manufacturing and industrialisation environments, and competitiveness analysis. High proficiency in Excel, PowerPoint, Word, and Microsoft Project, with excellent analytical structuring skills. This Consultant-Technology Strategy role directly supports the company's growth by strengthening consulting delivery, enhancing project-level client outcomes, and building scalable capabilities that enable longer-term partnerships and business development. Location: The role is based in the UK being fully remote, supporting consulting engagements across multiple client projects. Interested?: If you're excited by the blend of strategic consulting, technical leadership, and team development offered through this Consultant-Technology Strategy position, apply now to take the next step. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Location: London Birmingham Manchester Leeds Newcastle Bicester Other UK locations considered Salary: Up to £70,000 + Comprehensive Benefits PackageTake the lead on some of the UK's most complex Data Centre projects.As demand for digital infrastructure continues to accelerate, leading Building Services Design Consultancies are investing heavily in experienced engineers who can confidently lead projects, mentor junior colleagues and deliver technically outstanding mechanical designs.At Eligo Recruitment , we partner with some of the UK's most respected engineering consultancies, supporting the recruitment of Mechanical Design professionals who specialise in Mission Critical and Data Centre developments.If you're looking for a role where you'll have greater technical ownership, increased client exposure and the opportunity to influence the design of world-class facilities, we'd love to hear from you. The Opportunity This is more than simply producing designs.As a Senior Mechanical Design Engineer, you'll be responsible for leading the mechanical delivery of complex Data Centre projects from concept through to completion.You'll work closely with Associate Directors, Project Directors and multidisciplinary engineering teams, ensuring projects are delivered to the highest technical standards whilst mentoring junior engineers and maintaining excellent client relationships.Your expertise will directly influence the performance, resilience and sustainability of facilities supporting some of the world's largest technology organisations. Key Responsibilities Lead the mechanical design of hyperscale and mission critical Data Centre projects. Produce and review detailed engineering calculations, reports and specifications. Design HVAC, chilled water, condenser water, ventilation and mechanical building services systems. Coordinate designs using Revit and BIM Level 2 workflows. Review and check the work produced by junior engineers. Mentor Graduate and Mechanical Design Engineers, supporting their technical development. Attend client meetings and present engineering solutions with confidence. Coordinate with Electrical, Public Health, Structural and Civil Engineering teams. Support Project Managers in delivering projects on time and within budget. Resolve complex engineering challenges through innovative and practical design solutions. Ensure compliance with current British Standards, Building Regulations and industry best practice. Contribute to technical excellence across the wider engineering team. About You You'll already have experience working within a Building Services Design Consultancy delivering Data Centre or Mission Critical projects.You'll be comfortable taking ownership of packages of work, managing your own workload and supporting less experienced engineers whilst remaining hands-on with the technical design.We're particularly interested in engineers with experience of: Mechanical Building Services Design Data Centre Design Mission Critical Facilities HVAC Design Chilled Water Systems Cooling Plant Ventilation Systems Heat Load Calculations Energy Efficient Design BIM and Revit Technical Report Writing Client Liaison Design Coordination Essential Requirement Previous Mechanical Building Services Design experience within the Data Centre or Mission Critical sector is essential. Unfortunately, applicants without relevant Data Centre consultancy experience cannot be considered for these opportunities. Why Join? The Data Centre sector continues to be one of the fastest-growing and most technically rewarding areas within Building Services Engineering.This role offers the opportunity to: Lead technically challenging engineering projects. Work alongside recognised experts in the Mission Critical sector. Develop leadership and mentoring experience. Build strong relationships with high-profile global clients. Gain exposure to some of the UK's largest hyperscale developments. Continue progressing towards Principal and Associate-level positions. Locations Our clients have opportunities throughout the UK, including: London Birmingham Manchester Leeds Newcastle Bicester Based elsewhere? We welcome applications from experienced engineers across the UK. If you have the right Data Centre Building Services Design Consultancy background, we'd be delighted to discuss opportunities in your preferred location. Why Work with Eligo Recruitment? At Eligo Recruitment, we specialise in recruiting engineering professionals across the Data Centre and Mission Critical sectors.Our consultants understand the market, the projects and the skills employers genuinely value. We work closely with leading Building Services Design Consultancies across the UK, providing access to both advertised and confidential opportunities.Whether you're actively exploring new opportunities or simply interested in understanding the current market, we'll provide honest advice, detailed insight and a confidential recruitment process focused on your long-term career goals. Ready for Your Next Challenge? If you're an experienced Senior Mechanical Design Engineer looking to take the next step in your career within the Data Centre sector, we'd love to hear from you.Apply today or contact the specialist engineering team at Eligo Recruitment for a confidential discussion about current opportunities with some of the UK's leading Building Services Design Consultancies. Eligo Recruitment is acting as an Employment Business in relation to this vacancy. Eligo is proud to be an equal opportunity employer dedicated to fostering diversity and creating an inclusive and equitable environment for employees and applicants. We actively celebrate and embrace differences, including but not limited to race, colour, religion, sex, sexual orientation, gender identity, national origin, veteran status, and disability. We encourage applications from individuals of all backgrounds and experiences and all will be considered for employment without discrimination. At Eligo Recruitment diversity, equity and inclusion is integral to achieving our mission to ensure every workplace reflects the richness of human diversity.
Jul 31, 2026
Full time
Location: London Birmingham Manchester Leeds Newcastle Bicester Other UK locations considered Salary: Up to £70,000 + Comprehensive Benefits PackageTake the lead on some of the UK's most complex Data Centre projects.As demand for digital infrastructure continues to accelerate, leading Building Services Design Consultancies are investing heavily in experienced engineers who can confidently lead projects, mentor junior colleagues and deliver technically outstanding mechanical designs.At Eligo Recruitment , we partner with some of the UK's most respected engineering consultancies, supporting the recruitment of Mechanical Design professionals who specialise in Mission Critical and Data Centre developments.If you're looking for a role where you'll have greater technical ownership, increased client exposure and the opportunity to influence the design of world-class facilities, we'd love to hear from you. The Opportunity This is more than simply producing designs.As a Senior Mechanical Design Engineer, you'll be responsible for leading the mechanical delivery of complex Data Centre projects from concept through to completion.You'll work closely with Associate Directors, Project Directors and multidisciplinary engineering teams, ensuring projects are delivered to the highest technical standards whilst mentoring junior engineers and maintaining excellent client relationships.Your expertise will directly influence the performance, resilience and sustainability of facilities supporting some of the world's largest technology organisations. Key Responsibilities Lead the mechanical design of hyperscale and mission critical Data Centre projects. Produce and review detailed engineering calculations, reports and specifications. Design HVAC, chilled water, condenser water, ventilation and mechanical building services systems. Coordinate designs using Revit and BIM Level 2 workflows. Review and check the work produced by junior engineers. Mentor Graduate and Mechanical Design Engineers, supporting their technical development. Attend client meetings and present engineering solutions with confidence. Coordinate with Electrical, Public Health, Structural and Civil Engineering teams. Support Project Managers in delivering projects on time and within budget. Resolve complex engineering challenges through innovative and practical design solutions. Ensure compliance with current British Standards, Building Regulations and industry best practice. Contribute to technical excellence across the wider engineering team. About You You'll already have experience working within a Building Services Design Consultancy delivering Data Centre or Mission Critical projects.You'll be comfortable taking ownership of packages of work, managing your own workload and supporting less experienced engineers whilst remaining hands-on with the technical design.We're particularly interested in engineers with experience of: Mechanical Building Services Design Data Centre Design Mission Critical Facilities HVAC Design Chilled Water Systems Cooling Plant Ventilation Systems Heat Load Calculations Energy Efficient Design BIM and Revit Technical Report Writing Client Liaison Design Coordination Essential Requirement Previous Mechanical Building Services Design experience within the Data Centre or Mission Critical sector is essential. Unfortunately, applicants without relevant Data Centre consultancy experience cannot be considered for these opportunities. Why Join? The Data Centre sector continues to be one of the fastest-growing and most technically rewarding areas within Building Services Engineering.This role offers the opportunity to: Lead technically challenging engineering projects. Work alongside recognised experts in the Mission Critical sector. Develop leadership and mentoring experience. Build strong relationships with high-profile global clients. Gain exposure to some of the UK's largest hyperscale developments. Continue progressing towards Principal and Associate-level positions. Locations Our clients have opportunities throughout the UK, including: London Birmingham Manchester Leeds Newcastle Bicester Based elsewhere? We welcome applications from experienced engineers across the UK. If you have the right Data Centre Building Services Design Consultancy background, we'd be delighted to discuss opportunities in your preferred location. Why Work with Eligo Recruitment? At Eligo Recruitment, we specialise in recruiting engineering professionals across the Data Centre and Mission Critical sectors.Our consultants understand the market, the projects and the skills employers genuinely value. We work closely with leading Building Services Design Consultancies across the UK, providing access to both advertised and confidential opportunities.Whether you're actively exploring new opportunities or simply interested in understanding the current market, we'll provide honest advice, detailed insight and a confidential recruitment process focused on your long-term career goals. Ready for Your Next Challenge? If you're an experienced Senior Mechanical Design Engineer looking to take the next step in your career within the Data Centre sector, we'd love to hear from you.Apply today or contact the specialist engineering team at Eligo Recruitment for a confidential discussion about current opportunities with some of the UK's leading Building Services Design Consultancies. Eligo Recruitment is acting as an Employment Business in relation to this vacancy. Eligo is proud to be an equal opportunity employer dedicated to fostering diversity and creating an inclusive and equitable environment for employees and applicants. We actively celebrate and embrace differences, including but not limited to race, colour, religion, sex, sexual orientation, gender identity, national origin, veteran status, and disability. We encourage applications from individuals of all backgrounds and experiences and all will be considered for employment without discrimination. At Eligo Recruitment diversity, equity and inclusion is integral to achieving our mission to ensure every workplace reflects the richness of human diversity.
Senior Avionic Systems Engineer Location: Shaftesbury, Dorset On site initially Duration: Initial 6 12 month contract Rate: £60 70 ph Ltd Outside IR35 Overview We are seeking an experienced Senior Avionic Systems Engineer to join a dynamic engineering team supporting the development, integration and certification of advanced airborne systems. This role offers the opportunity to work on cutting-edge aerospace programmes, contributing across the full systems engineering lifecycle. The successful candidate will have extensive experience in avionics systems engineering within the aerospace or defence sector. Experience with avionics navigation systems is highly desirable. Key Responsibilities • Lead systems engineering activities throughout the full product lifecycle, from requirements capture through to verification and validation. • Develop and manage system requirements, architectures and interface definitions. • Produce and maintain systems engineering documentation, including requirements specifications, interface control documents and verification plans. • Support system integration, testing and troubleshooting activities. • Conduct requirements analysis, trade studies and design reviews. • Work closely with hardware, software and mechanical engineering teams to ensure successful system integration. • Support safety, reliability and certification activities in accordance with applicable aerospace standards. • Liaise with customers, suppliers and internal stakeholders to ensure technical requirements are achieved. • Provide technical leadership and mentoring to junior engineers where required. Key Skillset Essential • Significant experience in avionics systems engineering within aerospace or defence. • Strong understanding of the systems engineering lifecycle. • Experience developing system requirements and managing requirements using industry-standard tools. • Knowledge of systems integration and verification methodologies. • Experience producing high-quality technical documentation. • Excellent analytical and problem-solving skills. • Strong communication and stakeholder management abilities. Desirable • Experience with avionics navigation systems (GNSS, INS, GPS, Flight Management Systems or related navigation technologies). • Knowledge of ARINC standards, MIL-STD interfaces or other aerospace communication protocols. • Familiarity with aerospace safety standards such as ARP4754A, ARP4761 and DO-178C/DO-254. • Experience supporting aircraft certification programmes. • Model-Based Systems Engineering (MBSE) experience using SysML or similar tools. • Experience with IBM DOORS or equivalent requirements management software.
Jul 31, 2026
Contractor
Senior Avionic Systems Engineer Location: Shaftesbury, Dorset On site initially Duration: Initial 6 12 month contract Rate: £60 70 ph Ltd Outside IR35 Overview We are seeking an experienced Senior Avionic Systems Engineer to join a dynamic engineering team supporting the development, integration and certification of advanced airborne systems. This role offers the opportunity to work on cutting-edge aerospace programmes, contributing across the full systems engineering lifecycle. The successful candidate will have extensive experience in avionics systems engineering within the aerospace or defence sector. Experience with avionics navigation systems is highly desirable. Key Responsibilities • Lead systems engineering activities throughout the full product lifecycle, from requirements capture through to verification and validation. • Develop and manage system requirements, architectures and interface definitions. • Produce and maintain systems engineering documentation, including requirements specifications, interface control documents and verification plans. • Support system integration, testing and troubleshooting activities. • Conduct requirements analysis, trade studies and design reviews. • Work closely with hardware, software and mechanical engineering teams to ensure successful system integration. • Support safety, reliability and certification activities in accordance with applicable aerospace standards. • Liaise with customers, suppliers and internal stakeholders to ensure technical requirements are achieved. • Provide technical leadership and mentoring to junior engineers where required. Key Skillset Essential • Significant experience in avionics systems engineering within aerospace or defence. • Strong understanding of the systems engineering lifecycle. • Experience developing system requirements and managing requirements using industry-standard tools. • Knowledge of systems integration and verification methodologies. • Experience producing high-quality technical documentation. • Excellent analytical and problem-solving skills. • Strong communication and stakeholder management abilities. Desirable • Experience with avionics navigation systems (GNSS, INS, GPS, Flight Management Systems or related navigation technologies). • Knowledge of ARINC standards, MIL-STD interfaces or other aerospace communication protocols. • Familiarity with aerospace safety standards such as ARP4754A, ARP4761 and DO-178C/DO-254. • Experience supporting aircraft certification programmes. • Model-Based Systems Engineering (MBSE) experience using SysML or similar tools. • Experience with IBM DOORS or equivalent requirements management software.
Senior Technical Support Engineer Our client is a leading international organisation operating within the environmental and industrial technology sector. They provide innovative solutions that help businesses and communities improve sustainability, efficiency, and resource management. An exciting opportunity has arisen for a Senior Technical Support Engineer to join a specialist technical team. This role is ideal for an engineer who enjoys troubleshooting complex technical issues, supporting customers and partners, and working with advanced water treatment technologies. Responsibilities of the Senior Technical Support Engineer Provide advanced technical support across customer sites and partner networks. Support major installations, commissioning activities, validation processes, and performance optimisation. Investigate system faults and implement effective corrective actions. Participate in product testing and evaluation programmes, providing valuable performance feedback. Produce and maintain technical documentation, reports, and support materials. Contribute to product risk assessments and continuous improvement initiatives. Build strong customer relationships and provide exceptional technical service. Requirements of the Senior Technical Support Engineer Good understanding of mechanical, electrical, and control systems. Experience diagnosing faults using diagnostic equipment. Excellent analytical and problem-solving skills. Ability to interpret technical data and make informed decisions. Strong written and verbal communication skills. Experience producing technical reports and documentation. Confident handling customer escalations and challenging technical situations. Strong IT skills, including experience with business software packages. Mechanical, Chemical, or Electrical Engineering background. Full RTW in the UK. Benefits for the Senior Technical Support Engineer 25 days annual leave plus bank holidays. Option to buy and sell annual leave. Private medical insurance options. Cycle to Work scheme. If this Senior Technical Support Engineer position is of interest, please click Apply or get in touch with Steven at Orion.
Jul 31, 2026
Full time
Senior Technical Support Engineer Our client is a leading international organisation operating within the environmental and industrial technology sector. They provide innovative solutions that help businesses and communities improve sustainability, efficiency, and resource management. An exciting opportunity has arisen for a Senior Technical Support Engineer to join a specialist technical team. This role is ideal for an engineer who enjoys troubleshooting complex technical issues, supporting customers and partners, and working with advanced water treatment technologies. Responsibilities of the Senior Technical Support Engineer Provide advanced technical support across customer sites and partner networks. Support major installations, commissioning activities, validation processes, and performance optimisation. Investigate system faults and implement effective corrective actions. Participate in product testing and evaluation programmes, providing valuable performance feedback. Produce and maintain technical documentation, reports, and support materials. Contribute to product risk assessments and continuous improvement initiatives. Build strong customer relationships and provide exceptional technical service. Requirements of the Senior Technical Support Engineer Good understanding of mechanical, electrical, and control systems. Experience diagnosing faults using diagnostic equipment. Excellent analytical and problem-solving skills. Ability to interpret technical data and make informed decisions. Strong written and verbal communication skills. Experience producing technical reports and documentation. Confident handling customer escalations and challenging technical situations. Strong IT skills, including experience with business software packages. Mechanical, Chemical, or Electrical Engineering background. Full RTW in the UK. Benefits for the Senior Technical Support Engineer 25 days annual leave plus bank holidays. Option to buy and sell annual leave. Private medical insurance options. Cycle to Work scheme. If this Senior Technical Support Engineer position is of interest, please click Apply or get in touch with Steven at Orion.
Senior Test Development Engineer Location: Glenrothes or Livingston About the role: Responsible for the design, manufacture, verification and validation, along with through life technical support of board level, sub-system and system level test equipment. Skills: • Test software design • Excellent knowledge of analogue and digital electronic circuit design • Ability to write comprehensive technical design documentation • Proven knowledge in handover and management of designs in production • Excellent hardware troubleshooting skills • Able to support/debug system integration • Must be eligible for MOD Security Clearance to a minimum of SC level Highly Desirable: • Significant test development in a safety critical industry • Use of Mentor Graphics schematic entry and PCB layout tools • Understanding of common test architectures PXI/d LXI • Measurement Uncertainty and its application in test equipment design and validation • Software Certification or detailed knowledge of: NI LabView, NI CVI, NI TestStand, C# • Design of mix signal circuits • High speed serial networks • An appreciation of RF electronics • Knowledge of power supply design Responsibilities • Design of functional test equipment for circuit cards, sub-assemblys and systems. • To take responsibility for the design and overall quality of the test equipment and provide leadership and guidance for junior engineers. • Documentation of design specifications and implementation details. Take part in design reviews. Upholding of design standards and methodologies. • Realisation of complex system requirements to provide robust and reliable test hardware solutions. • Responsibility for the complete implementation of detailed technical items and an understanding/appreciation of system level items. • Collaboration with other team members (including both hardware and software engineers) to agree system designs, interfaces and protocols etc. • Development of appropriate test hardware, test software and procedures, both informal and formal, to prove the correct operation of hardware. • Provide support to manufacturing answering product queries & resolving technical issues. • Provide support for the test hardware and manage obsolescence throughout its lifecycle. • Monitoring and reporting of progress of test development to immediate supervisor and development team. • Proactively support company compliance to Health and Safety legislation through adherence to company polices, processes and practices. • Ensure that all business activity is conducted in line with company values, policies and ethics codes of conduct. • Undertake any other activity as reasonably requested by management • Application of Design Review Processes • Accountable for engineering specific risks and opportunities. • Key contributor at Gate/Design reviews • Provides guidance of Test Development processes and tools. • Contribute to section/business area resource planning with a working understanding of Microsoft Project tools. • Test Engineering Lead for a small/medium scale test engineering program • Ability to identify and engage the appropriate SMEs to support the Test Development Engineering activities. • Contributor/Approver for standard/tailored test development process including Design Review gates and content • Key interface to external customers/suppliers.
Jul 31, 2026
Contractor
Senior Test Development Engineer Location: Glenrothes or Livingston About the role: Responsible for the design, manufacture, verification and validation, along with through life technical support of board level, sub-system and system level test equipment. Skills: • Test software design • Excellent knowledge of analogue and digital electronic circuit design • Ability to write comprehensive technical design documentation • Proven knowledge in handover and management of designs in production • Excellent hardware troubleshooting skills • Able to support/debug system integration • Must be eligible for MOD Security Clearance to a minimum of SC level Highly Desirable: • Significant test development in a safety critical industry • Use of Mentor Graphics schematic entry and PCB layout tools • Understanding of common test architectures PXI/d LXI • Measurement Uncertainty and its application in test equipment design and validation • Software Certification or detailed knowledge of: NI LabView, NI CVI, NI TestStand, C# • Design of mix signal circuits • High speed serial networks • An appreciation of RF electronics • Knowledge of power supply design Responsibilities • Design of functional test equipment for circuit cards, sub-assemblys and systems. • To take responsibility for the design and overall quality of the test equipment and provide leadership and guidance for junior engineers. • Documentation of design specifications and implementation details. Take part in design reviews. Upholding of design standards and methodologies. • Realisation of complex system requirements to provide robust and reliable test hardware solutions. • Responsibility for the complete implementation of detailed technical items and an understanding/appreciation of system level items. • Collaboration with other team members (including both hardware and software engineers) to agree system designs, interfaces and protocols etc. • Development of appropriate test hardware, test software and procedures, both informal and formal, to prove the correct operation of hardware. • Provide support to manufacturing answering product queries & resolving technical issues. • Provide support for the test hardware and manage obsolescence throughout its lifecycle. • Monitoring and reporting of progress of test development to immediate supervisor and development team. • Proactively support company compliance to Health and Safety legislation through adherence to company polices, processes and practices. • Ensure that all business activity is conducted in line with company values, policies and ethics codes of conduct. • Undertake any other activity as reasonably requested by management • Application of Design Review Processes • Accountable for engineering specific risks and opportunities. • Key contributor at Gate/Design reviews • Provides guidance of Test Development processes and tools. • Contribute to section/business area resource planning with a working understanding of Microsoft Project tools. • Test Engineering Lead for a small/medium scale test engineering program • Ability to identify and engage the appropriate SMEs to support the Test Development Engineering activities. • Contributor/Approver for standard/tailored test development process including Design Review gates and content • Key interface to external customers/suppliers.
Vacancy: Senior Cybersecurity Engineer Location: Hebburn, England (Hybrid Working) Function: Siemens Electrification & Automation (EA) Ready to bridge the gap between cutting-edge cybersecurity and the critical infrastructure that powers our world? At Siemens Electrification & Automation (EA), we're not just transforming energy systems; we're engineering solutions that shape society, connecting the real and digital worlds. As a Senior Cybersecurity Engineer, you'll apply your deep cybersecurity expertise to design and deliver solutions for critical national infrastructure, helping us build a smarter, more sustainable future. This role will be based at our Hebburn office and will include hybrid working with the expectation to be in the office 2 day a week. We're actively seeking individuals with a strong foundational cybersecurity background who are eager to develop their OT expertise, within a supportive and innovative environment You will make a difference by: Supporting and consulting project delivery teams (in development, engineering or service) to design, configure, implement an appropriate secure architecture and product & solution security (software and hardware) which meets customer expectations. Developing and maintaining Cyber Security Models for new and existing solutions in line with industry and global standards Driving improvements in cybersecurity procedures and processes, identifying opportunities to enhance security posture and operational effectiveness. Creating and managing Factory and Site Acceptance Cyber Security Test documentation and activities to validate the security of delivered solutions. Supporting project teams through cyber security activities across development, project management, and service phases, providing guidance on Product & Solution Security (PSS). Delivering Cyber Security training to internal teams as needed. Monitoring and reporting cybersecurity status, risks and actions to management in an accurate and timely manner. Ensuring compliance with all business compliance requirements, including Company policies, Business Conduct Guidelines, and the handling of confidential information. Championing' Zero Harm safety culture, promoting safe working practices and contributing to a positive, proactive safety environment. Your defining qualities: Understanding of Operational Technology (OT) and Industrial Control Systems (ICS) environments Experience in OT & ICS, Industrial Automation, or Critical Infrastructure Cyber Security Implementations. Understanding of key industry regulations and standards (including IEC 62443, IEC 62351, IEC 61850, NIS2) Familiarity with OT network designs (e.g., HSR, PRP) Exposure to network security technologies (e.g. Firewalls, IDS, IPSec, SSL) Excellent written, verbal, and interpersonal communication skills Desirable Relevant qualifications or certifications (e.g. CISSP, GICSP, CISA), or willingness to work towards them Experience in substation automation and protection systems, Knowledge of server administration and virtualisation. Experience in network design, switching, and routing. Exposure to IoT and cloud-based technologies. What can we offer? Performance-Based Bonus: Enjoy an annual bonus linked to the company's performance Flexible Working Hours: Achieve a healthy work-life balance with our flexible working arrangements Pension Plan: Secure your future with our generous pension scheme, with employer contributions up to 10%. Time Off: Recharge and rejuvenate with 26 days of annual leave (plus bank holidays), and the option to buy or sell an additional 5 days! We are fully committed to providing equal opportunities and building an inclusive workplace where a broad range of backgrounds and perspectives thrive. We embrace the many ways people think, learn, and experience the world-because we know that diverse minds drive innovation. So that we can support you to be your best during the application and interview process, please let us know if you have any specific requirements.
Jul 31, 2026
Full time
Vacancy: Senior Cybersecurity Engineer Location: Hebburn, England (Hybrid Working) Function: Siemens Electrification & Automation (EA) Ready to bridge the gap between cutting-edge cybersecurity and the critical infrastructure that powers our world? At Siemens Electrification & Automation (EA), we're not just transforming energy systems; we're engineering solutions that shape society, connecting the real and digital worlds. As a Senior Cybersecurity Engineer, you'll apply your deep cybersecurity expertise to design and deliver solutions for critical national infrastructure, helping us build a smarter, more sustainable future. This role will be based at our Hebburn office and will include hybrid working with the expectation to be in the office 2 day a week. We're actively seeking individuals with a strong foundational cybersecurity background who are eager to develop their OT expertise, within a supportive and innovative environment You will make a difference by: Supporting and consulting project delivery teams (in development, engineering or service) to design, configure, implement an appropriate secure architecture and product & solution security (software and hardware) which meets customer expectations. Developing and maintaining Cyber Security Models for new and existing solutions in line with industry and global standards Driving improvements in cybersecurity procedures and processes, identifying opportunities to enhance security posture and operational effectiveness. Creating and managing Factory and Site Acceptance Cyber Security Test documentation and activities to validate the security of delivered solutions. Supporting project teams through cyber security activities across development, project management, and service phases, providing guidance on Product & Solution Security (PSS). Delivering Cyber Security training to internal teams as needed. Monitoring and reporting cybersecurity status, risks and actions to management in an accurate and timely manner. Ensuring compliance with all business compliance requirements, including Company policies, Business Conduct Guidelines, and the handling of confidential information. Championing' Zero Harm safety culture, promoting safe working practices and contributing to a positive, proactive safety environment. Your defining qualities: Understanding of Operational Technology (OT) and Industrial Control Systems (ICS) environments Experience in OT & ICS, Industrial Automation, or Critical Infrastructure Cyber Security Implementations. Understanding of key industry regulations and standards (including IEC 62443, IEC 62351, IEC 61850, NIS2) Familiarity with OT network designs (e.g., HSR, PRP) Exposure to network security technologies (e.g. Firewalls, IDS, IPSec, SSL) Excellent written, verbal, and interpersonal communication skills Desirable Relevant qualifications or certifications (e.g. CISSP, GICSP, CISA), or willingness to work towards them Experience in substation automation and protection systems, Knowledge of server administration and virtualisation. Experience in network design, switching, and routing. Exposure to IoT and cloud-based technologies. What can we offer? Performance-Based Bonus: Enjoy an annual bonus linked to the company's performance Flexible Working Hours: Achieve a healthy work-life balance with our flexible working arrangements Pension Plan: Secure your future with our generous pension scheme, with employer contributions up to 10%. Time Off: Recharge and rejuvenate with 26 days of annual leave (plus bank holidays), and the option to buy or sell an additional 5 days! We are fully committed to providing equal opportunities and building an inclusive workplace where a broad range of backgrounds and perspectives thrive. We embrace the many ways people think, learn, and experience the world-because we know that diverse minds drive innovation. So that we can support you to be your best during the application and interview process, please let us know if you have any specific requirements.
We're looking for a commercially minded Data Business Analyst to join the IT Transformation team and play a key role in improving the way our client uses data, systems, and processes. This is a varied role that combines business analysis, process improvement, data analysis, and reporting. You'll work closely with stakeholders across the business to map and improve processes, develop meaningful management information, build Power BI dashboards, and ensure business systems are being used effectively to support operational performance. If you enjoy solving problems, analysing data, improving business processes, and turning complex information into clear, actionable insight, this is an excellent opportunity to make a real impact within a growing manufacturing business. The Role As the Data Business Analyst, you'll act as the link between operational teams, business leaders, and technology. You'll analyse how the business works today, identify opportunities for improvement, and deliver data-driven insights that support informed decision-making. Working as part of the IT Transformation team, you'll help improve process consistency, enhance data quality, develop reporting solutions, and support the successful adoption of business systems across the organisation. Key Responsibilities Capture, map, and maintain business processes using tools such as Miro, producing clear L1, L2 and L3 process documentation, procedures and work instructions. Analyse existing business processes to identify inefficiencies, risks, bottlenecks and opportunities for continuous improvement. Work closely with stakeholders to document agreed process changes and ensure improvements are implemented consistently. Support users in the effective use of business systems, encouraging best practice and improving data accuracy across key platforms. Query and analyse data using SQL to support operational reporting, business analysis and decision-making. Use advanced Excel, including VBA/VB automation where appropriate, to manipulate, cleanse, reconcile and structure large data sets. Design, develop and maintain interactive Power BI dashboards and reports that provide meaningful operational and strategic insight. Produce regular management information (MI), KPI reporting and ad hoc analysis for senior leadership teams. Translate business requirements into practical reporting and process solutions. Support the ongoing adoption and development of Microsoft Dynamics 365 (D365), Microsoft 365 and associated business applications. Build strong relationships with stakeholders across multiple departments, communicating effectively with both technical and non-technical audiences. Gain an understanding of manufacturing operations, including production, planning, supply chain and commercial activities, to deliver practical business improvements. Continuously identify opportunities to improve reporting, automation, business processes and data quality. About You We're looking for someone who combines strong analytical ability with excellent communication skills and enjoys working across both data and business processes. You'll ideally have experience in a Business Analyst, Data Analyst or Business Systems Analyst role and be comfortable engaging with stakeholders at all levels. Essential Skills & Experience Experience in a Business Analyst, Data Analyst or hybrid Business Systems role. Strong business process mapping and documentation skills, including L1-L3 process modelling. Excellent Power BI skills, including dashboard design, data visualisation and reporting. Good SQL knowledge with experience writing queries to extract, analyse and validate data. Advanced Microsoft Excel skills, including complex formulas, data manipulation, reconciliation and VBA/VB automation. Experience producing management information, KPI reporting and business dashboards. Good understanding of Microsoft Dynamics 365 (D365) and Microsoft 365. Strong analytical and problem-solving skills with excellent attention to detail. Ability to communicate effectively with technical and non-technical stakeholders. Confident gathering requirements and translating business needs into practical solutions. Desirable Experience within manufacturing, engineering or industrial environments. What's on Offer Competitive salary (dependent on experience) 37.5-hour working week (office based) 25 days annual leave plus bank holidays Quarterly Company Profit Share Scheme Healthcare Cash Plan Employee Assistance Programme Life Assurance Electric Vehicle Salary Sacrifice Scheme Company Pension Free on-site parking
Jul 31, 2026
Full time
We're looking for a commercially minded Data Business Analyst to join the IT Transformation team and play a key role in improving the way our client uses data, systems, and processes. This is a varied role that combines business analysis, process improvement, data analysis, and reporting. You'll work closely with stakeholders across the business to map and improve processes, develop meaningful management information, build Power BI dashboards, and ensure business systems are being used effectively to support operational performance. If you enjoy solving problems, analysing data, improving business processes, and turning complex information into clear, actionable insight, this is an excellent opportunity to make a real impact within a growing manufacturing business. The Role As the Data Business Analyst, you'll act as the link between operational teams, business leaders, and technology. You'll analyse how the business works today, identify opportunities for improvement, and deliver data-driven insights that support informed decision-making. Working as part of the IT Transformation team, you'll help improve process consistency, enhance data quality, develop reporting solutions, and support the successful adoption of business systems across the organisation. Key Responsibilities Capture, map, and maintain business processes using tools such as Miro, producing clear L1, L2 and L3 process documentation, procedures and work instructions. Analyse existing business processes to identify inefficiencies, risks, bottlenecks and opportunities for continuous improvement. Work closely with stakeholders to document agreed process changes and ensure improvements are implemented consistently. Support users in the effective use of business systems, encouraging best practice and improving data accuracy across key platforms. Query and analyse data using SQL to support operational reporting, business analysis and decision-making. Use advanced Excel, including VBA/VB automation where appropriate, to manipulate, cleanse, reconcile and structure large data sets. Design, develop and maintain interactive Power BI dashboards and reports that provide meaningful operational and strategic insight. Produce regular management information (MI), KPI reporting and ad hoc analysis for senior leadership teams. Translate business requirements into practical reporting and process solutions. Support the ongoing adoption and development of Microsoft Dynamics 365 (D365), Microsoft 365 and associated business applications. Build strong relationships with stakeholders across multiple departments, communicating effectively with both technical and non-technical audiences. Gain an understanding of manufacturing operations, including production, planning, supply chain and commercial activities, to deliver practical business improvements. Continuously identify opportunities to improve reporting, automation, business processes and data quality. About You We're looking for someone who combines strong analytical ability with excellent communication skills and enjoys working across both data and business processes. You'll ideally have experience in a Business Analyst, Data Analyst or Business Systems Analyst role and be comfortable engaging with stakeholders at all levels. Essential Skills & Experience Experience in a Business Analyst, Data Analyst or hybrid Business Systems role. Strong business process mapping and documentation skills, including L1-L3 process modelling. Excellent Power BI skills, including dashboard design, data visualisation and reporting. Good SQL knowledge with experience writing queries to extract, analyse and validate data. Advanced Microsoft Excel skills, including complex formulas, data manipulation, reconciliation and VBA/VB automation. Experience producing management information, KPI reporting and business dashboards. Good understanding of Microsoft Dynamics 365 (D365) and Microsoft 365. Strong analytical and problem-solving skills with excellent attention to detail. Ability to communicate effectively with technical and non-technical stakeholders. Confident gathering requirements and translating business needs into practical solutions. Desirable Experience within manufacturing, engineering or industrial environments. What's on Offer Competitive salary (dependent on experience) 37.5-hour working week (office based) 25 days annual leave plus bank holidays Quarterly Company Profit Share Scheme Healthcare Cash Plan Employee Assistance Programme Life Assurance Electric Vehicle Salary Sacrifice Scheme Company Pension Free on-site parking
Senior Software Engineer 75,000 to 85,000 + Private Healthcare + Enhanced Pension Winchester (Hybrid, 4 days per week in the office) Are you a senior software engineer looking to take end-to-end ownership of complex software at the heart of advanced detection systems, working alongside physicists and engineers to bring new technologies from research into real-world products? This is a principal-level technical role within a specialist engineering business developing integrated hardware and software platforms used across security, defence and other regulated environments. The software powers the wider ecosystem, enabling connectivity, real-time monitoring, alerting and operational visibility across distributed detection systems. You'll work closely with an in-house team of physicists researching new detection technologies, helping develop the software that brings those capabilities into the finished products. You'll provide technical leadership across a TypeScript-based microservices platform while remaining hands-on across backend services and contributing to a large Angular enterprise application used by customers in the field. Working with onshore and offshore engineering teams, you'll help shape architecture, technical standards and delivery across the full software lifecycle. This role suits an experienced engineer who enjoys deep technical ownership, architectural responsibility and building software with genuine real-world impact. The Role Technical ownership of a TypeScript-based microservices platform running in Linux environments. Leading development across backend services and a large Angular application for monitoring, visualisation and alerting. Designing and optimising data models across PostgreSQL, MongoDB, Elasticsearch and Redis. Owning CI/CD pipelines and infrastructure across on-prem, cloud and hybrid deployments using Kubernetes, Helm, Terraform and Ansible. Working alongside physicists and engineering teams to deliver new product capabilities while mentoring engineers and driving technical standards. The Person Strong experience designing and building distributed, microservices-based systems. Commercial experience with TypeScript on the backend and Angular on the frontend. Proven experience with PostgreSQL, MongoDB, Elasticsearch, Redis or similar technologies. Comfortable working within Linux-based, security-conscious or regulated environments. Experience with CI/CD, infrastructure as code and modern DevSecOps practices. Confident providing technical leadership while remaining hands-on. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Jul 31, 2026
Full time
Senior Software Engineer 75,000 to 85,000 + Private Healthcare + Enhanced Pension Winchester (Hybrid, 4 days per week in the office) Are you a senior software engineer looking to take end-to-end ownership of complex software at the heart of advanced detection systems, working alongside physicists and engineers to bring new technologies from research into real-world products? This is a principal-level technical role within a specialist engineering business developing integrated hardware and software platforms used across security, defence and other regulated environments. The software powers the wider ecosystem, enabling connectivity, real-time monitoring, alerting and operational visibility across distributed detection systems. You'll work closely with an in-house team of physicists researching new detection technologies, helping develop the software that brings those capabilities into the finished products. You'll provide technical leadership across a TypeScript-based microservices platform while remaining hands-on across backend services and contributing to a large Angular enterprise application used by customers in the field. Working with onshore and offshore engineering teams, you'll help shape architecture, technical standards and delivery across the full software lifecycle. This role suits an experienced engineer who enjoys deep technical ownership, architectural responsibility and building software with genuine real-world impact. The Role Technical ownership of a TypeScript-based microservices platform running in Linux environments. Leading development across backend services and a large Angular application for monitoring, visualisation and alerting. Designing and optimising data models across PostgreSQL, MongoDB, Elasticsearch and Redis. Owning CI/CD pipelines and infrastructure across on-prem, cloud and hybrid deployments using Kubernetes, Helm, Terraform and Ansible. Working alongside physicists and engineering teams to deliver new product capabilities while mentoring engineers and driving technical standards. The Person Strong experience designing and building distributed, microservices-based systems. Commercial experience with TypeScript on the backend and Angular on the frontend. Proven experience with PostgreSQL, MongoDB, Elasticsearch, Redis or similar technologies. Comfortable working within Linux-based, security-conscious or regulated environments. Experience with CI/CD, infrastructure as code and modern DevSecOps practices. Confident providing technical leadership while remaining hands-on. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
1st/2nd Line IT Support - Manchester Location: Manchester On-site, 5 days per week We are seeking an experienced 1st/2nd Line IT Support Engineer to join our client-side IT team. This is a hands-on role, providing support to end-users across hardware, software, and network issues. You will work in-office 5 days a week, with excellent opportunities for career progression and training in both cloud and on-premise technologies. Key Responsibilities: Provide 1st and 2nd line support to end users, both remotely and on-site. Manage and resolve hardware, software, and network issues. Support Office 365, Exchange, and on-premise systems. Respond to and resolve tickets using the company s helpdesk system. Install, configure, and maintain IT equipment. Escalate complex issues to senior engineers as required. Maintain excellent communication with users, keeping them informed throughout the support process. Skills & Experience: Proven experience in a 1st/2nd line IT support or helpdesk role. Strong troubleshooting skills and ability to resolve issues efficiently. Experience with Office 365, Exchange, and on-premise environments. Confident with hardware installation, maintenance, and problem resolution. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Benefits: Excellent career progression and training opportunities Good holiday entitlement Interested? Please Click Apply Now! 1st/2nd Line IT Support - Manchester
Jul 31, 2026
Full time
1st/2nd Line IT Support - Manchester Location: Manchester On-site, 5 days per week We are seeking an experienced 1st/2nd Line IT Support Engineer to join our client-side IT team. This is a hands-on role, providing support to end-users across hardware, software, and network issues. You will work in-office 5 days a week, with excellent opportunities for career progression and training in both cloud and on-premise technologies. Key Responsibilities: Provide 1st and 2nd line support to end users, both remotely and on-site. Manage and resolve hardware, software, and network issues. Support Office 365, Exchange, and on-premise systems. Respond to and resolve tickets using the company s helpdesk system. Install, configure, and maintain IT equipment. Escalate complex issues to senior engineers as required. Maintain excellent communication with users, keeping them informed throughout the support process. Skills & Experience: Proven experience in a 1st/2nd line IT support or helpdesk role. Strong troubleshooting skills and ability to resolve issues efficiently. Experience with Office 365, Exchange, and on-premise environments. Confident with hardware installation, maintenance, and problem resolution. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Benefits: Excellent career progression and training opportunities Good holiday entitlement Interested? Please Click Apply Now! 1st/2nd Line IT Support - Manchester
