Field Service Engineer (Calibration & Test Equipment) Milton Keynes £35,000-£40,000 DOE (flexibility for the right candidate) Monday to Friday 40 hours per week Company vehicle provided for all customer site visits Split between workshop and customer sites ️ UK and international travel required as part of the role - a valid passport is essential Temp-to-perm opportunity About the Role We're recruiting for a Field Service Engineer (Calibration & Test Equipment) to join a specialist engineering business based in Milton Keynes. Our client is a well-established, internationally recognised engineering business with more than 60 years of experience designing, manufacturing and supporting specialist testing and measurement equipment. Their products are trusted by customers across a wide range of industries where precision, reliability and quality are essential. Operating on a global scale, the company supports customers throughout the UK and overseas, providing installation, calibration, maintenance and technical support for a comprehensive range of specialist equipment. With a strong reputation for engineering excellence and innovation, they continue to invest in new technologies and are committed to delivering exceptional customer service. Joining the business offers the opportunity to work with advanced testing and measurement systems, travel to a diverse range of customer sites across the UK and internationally, and become part of a knowledgeable and supportive engineering team where no two days are the same. This is an excellent opportunity for an engineer with strong mechanical fault-finding skills who enjoys a varied role combining workshop-based repairs with customer site visits. You'll service, maintain, repair and calibrate specialist force measurement and testing equipment while delivering first-class customer support. The role is split between the workshop and customer sites, with regular travel throughout the UK and occasional international travel. As part of the role, you'll need a valid passport and be happy travelling when required. If you have experience in field service, maintenance, calibration, instrumentation or test equipment and are looking to further develop your engineering career, we'd love to hear from you. What You'll Be Doing Service, maintain and calibrate specialist force measurement and testing equipment. Carry out planned preventative maintenance and repairs at customer sites. Travel to customer locations throughout the UK and internationally as required. Diagnose mechanical, hydraulic and basic electronic faults. Replace components, including PCBs where required. Use calibration equipment and accurately record test data. Produce calibration certificates and detailed service reports. Read and interpret engineering drawings and technical documentation. Ensure all work complies with relevant testing standards and quality requirements. Build positive relationships with customers and provide professional technical support. Manage your own workload while working independently both on-site and in the workshop. What We're Looking For We're keen to speak with engineers who have experience servicing, maintaining or repairing engineering equipment. You don't need direct experience with the client's specific products, but you should have a strong engineering background and be confident diagnosing mechanical faults. Essential Skills & Experience Experience servicing, maintaining or calibrating engineering equipment. Strong mechanical fault-finding skills. Good understanding of hydraulic and pneumatic systems. Basic electronics knowledge, including the use of a multimeter and PCB replacement. Ability to read and interpret technical drawings. Good IT skills with experience producing reports and recording calibration data. Full UK driving licence. Valid passport and willingness to travel throughout the UK and internationally. Professional and confident communication skills with the ability to build relationships with customers at all levels. Ability to work independently and manage your own workload. Good level of physical fitness, as some calibration equipment requires manual handling. Desirable Experience Experience in any of the following would be advantageous: Force measurement or test equipment. Calibration or instrumentation. Load cells, LVDTs or electronic transducers. Testing or laboratory equipment. Engineering standards and compliance requirements. Previous field service experience. Suitable Backgrounds This role would suit candidates with experience as a: Field Service Engineer Calibration Engineer Calibration Technician Service Engineer Instrumentation Engineer Test & Measurement Engineer Mechanical Maintenance Engineer Multi-skilled Maintenance Engineer Electronics Technician Hydraulic Engineer Ex-Forces Engineer (REME, RAF or Royal Navy) What's on Offer? £35,000-£40,000 salary , with flexibility for the right experience. Monday to Friday working pattern. Company vehicle provided for all customer visits. A varied role combining workshop-based work with field service. Opportunity to work with specialist force measurement and calibration equipment. UK and international travel. Interested? To find out more or apply, contact:
Aug 12, 2026
Full time
Field Service Engineer (Calibration & Test Equipment) Milton Keynes £35,000-£40,000 DOE (flexibility for the right candidate) Monday to Friday 40 hours per week Company vehicle provided for all customer site visits Split between workshop and customer sites ️ UK and international travel required as part of the role - a valid passport is essential Temp-to-perm opportunity About the Role We're recruiting for a Field Service Engineer (Calibration & Test Equipment) to join a specialist engineering business based in Milton Keynes. Our client is a well-established, internationally recognised engineering business with more than 60 years of experience designing, manufacturing and supporting specialist testing and measurement equipment. Their products are trusted by customers across a wide range of industries where precision, reliability and quality are essential. Operating on a global scale, the company supports customers throughout the UK and overseas, providing installation, calibration, maintenance and technical support for a comprehensive range of specialist equipment. With a strong reputation for engineering excellence and innovation, they continue to invest in new technologies and are committed to delivering exceptional customer service. Joining the business offers the opportunity to work with advanced testing and measurement systems, travel to a diverse range of customer sites across the UK and internationally, and become part of a knowledgeable and supportive engineering team where no two days are the same. This is an excellent opportunity for an engineer with strong mechanical fault-finding skills who enjoys a varied role combining workshop-based repairs with customer site visits. You'll service, maintain, repair and calibrate specialist force measurement and testing equipment while delivering first-class customer support. The role is split between the workshop and customer sites, with regular travel throughout the UK and occasional international travel. As part of the role, you'll need a valid passport and be happy travelling when required. If you have experience in field service, maintenance, calibration, instrumentation or test equipment and are looking to further develop your engineering career, we'd love to hear from you. What You'll Be Doing Service, maintain and calibrate specialist force measurement and testing equipment. Carry out planned preventative maintenance and repairs at customer sites. Travel to customer locations throughout the UK and internationally as required. Diagnose mechanical, hydraulic and basic electronic faults. Replace components, including PCBs where required. Use calibration equipment and accurately record test data. Produce calibration certificates and detailed service reports. Read and interpret engineering drawings and technical documentation. Ensure all work complies with relevant testing standards and quality requirements. Build positive relationships with customers and provide professional technical support. Manage your own workload while working independently both on-site and in the workshop. What We're Looking For We're keen to speak with engineers who have experience servicing, maintaining or repairing engineering equipment. You don't need direct experience with the client's specific products, but you should have a strong engineering background and be confident diagnosing mechanical faults. Essential Skills & Experience Experience servicing, maintaining or calibrating engineering equipment. Strong mechanical fault-finding skills. Good understanding of hydraulic and pneumatic systems. Basic electronics knowledge, including the use of a multimeter and PCB replacement. Ability to read and interpret technical drawings. Good IT skills with experience producing reports and recording calibration data. Full UK driving licence. Valid passport and willingness to travel throughout the UK and internationally. Professional and confident communication skills with the ability to build relationships with customers at all levels. Ability to work independently and manage your own workload. Good level of physical fitness, as some calibration equipment requires manual handling. Desirable Experience Experience in any of the following would be advantageous: Force measurement or test equipment. Calibration or instrumentation. Load cells, LVDTs or electronic transducers. Testing or laboratory equipment. Engineering standards and compliance requirements. Previous field service experience. Suitable Backgrounds This role would suit candidates with experience as a: Field Service Engineer Calibration Engineer Calibration Technician Service Engineer Instrumentation Engineer Test & Measurement Engineer Mechanical Maintenance Engineer Multi-skilled Maintenance Engineer Electronics Technician Hydraulic Engineer Ex-Forces Engineer (REME, RAF or Royal Navy) What's on Offer? £35,000-£40,000 salary , with flexibility for the right experience. Monday to Friday working pattern. Company vehicle provided for all customer visits. A varied role combining workshop-based work with field service. Opportunity to work with specialist force measurement and calibration equipment. UK and international travel. Interested? To find out more or apply, contact:
Contract Test Technician Test Technician Type: 6-12 Month Contract Excellent opportunity for someone with electronics test experience who enjoys working in a hands-on production environment to undertake an interesting contact role. The successful candidate will be responsible for testing PCBAs and instrumentation products, ensuring units are fully functional and meet the required quality standards before progressing through production. This role focuses on following established test procedures and utilising a variety of test equipment rather than extensive fault-finding, with engineering support readily available when required. Key Responsibilities of the Test Technician Carry out testing of PCBAs and electronic instrumentation products in line with documented procedures. Connect and operate a range of test instruments and equipment to verify product functionality. Follow structured test processes and accurately record test results. Identify and report units that fail testing to the engineering team for further investigation. Fit components to PCBAs where required as part of the testing process. Ensure all tested units meet quality and performance standards before release. Maintain a safe, organised, and efficient working environment. Work closely with engineers and production personnel to support manufacturing activities. Qualifications & Requirements of the Test Technician Previous experience in electronics testing, PCBA testing, or a similar electronics manufacturing environment. Ability to use electronic test equipment and instrumentation. Comfortable connecting various instruments to PCBAs and following detailed test procedures. Able to interpret work instructions and technical documentation. Good understanding of electronic assembly and manufacturing processes. Fault-finding experience would be beneficial but is not essential. Summary: 6-12 month contract opportunity. Competitive rates of £23-27 per hour Umbrella or PAYE option also available Supportive engineering team with established test procedures. Opportunity to work on innovative products. Please apply via the link or contact Alison for further details
Aug 08, 2026
Contractor
Contract Test Technician Test Technician Type: 6-12 Month Contract Excellent opportunity for someone with electronics test experience who enjoys working in a hands-on production environment to undertake an interesting contact role. The successful candidate will be responsible for testing PCBAs and instrumentation products, ensuring units are fully functional and meet the required quality standards before progressing through production. This role focuses on following established test procedures and utilising a variety of test equipment rather than extensive fault-finding, with engineering support readily available when required. Key Responsibilities of the Test Technician Carry out testing of PCBAs and electronic instrumentation products in line with documented procedures. Connect and operate a range of test instruments and equipment to verify product functionality. Follow structured test processes and accurately record test results. Identify and report units that fail testing to the engineering team for further investigation. Fit components to PCBAs where required as part of the testing process. Ensure all tested units meet quality and performance standards before release. Maintain a safe, organised, and efficient working environment. Work closely with engineers and production personnel to support manufacturing activities. Qualifications & Requirements of the Test Technician Previous experience in electronics testing, PCBA testing, or a similar electronics manufacturing environment. Ability to use electronic test equipment and instrumentation. Comfortable connecting various instruments to PCBAs and following detailed test procedures. Able to interpret work instructions and technical documentation. Good understanding of electronic assembly and manufacturing processes. Fault-finding experience would be beneficial but is not essential. Summary: 6-12 month contract opportunity. Competitive rates of £23-27 per hour Umbrella or PAYE option also available Supportive engineering team with established test procedures. Opportunity to work on innovative products. Please apply via the link or contact Alison for further details
Title: Calibration Engineer - Medical Devices Location: Witney Contract Type: 12 months Work Schedule: 37.5 hours per week, Monday to Friday Salary: Competitive package ranging up to £60,000 per annum (depending on experience and the position) Job Summary We are seeking a detail-oriented and technically skilled Calibration Engineer to ensure the accuracy, reliability, and compliance of measurement and testing equipment used in the manufacturing, testing, and maintenance of medical devices. The ideal candidate will be responsible for calibration planning, execution, documentation, troubleshooting, and maintaining compliance with applicable regulatory and quality standards. Key Responsibilities Perform calibration, verification, and preventive maintenance of laboratory, production, and inspection equipment. Develop, implement, and maintain calibration schedules and records. Ensure all measurement equipment complies with internal quality requirements and regulatory standards. Troubleshoot and resolve calibration-related issues to minimize equipment downtime. Review calibration certificates and verify traceability to national or international standards. Coordinate with external accredited calibration laboratories when required. Support equipment qualification activities, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Prepare and maintain calibration procedures, work instructions, and standard operating procedures (SOPs). Participate in internal and external quality audits and support regulatory inspections. Analyze calibration trends and recommend corrective and preventive actions (CAPA). Collaborate with Manufacturing, Quality Assurance, Quality Control, Validation, Engineering, and Maintenance teams. Ensure compliance with Good Manufacturing Practices (GMP), Good Documentation Practices (GDP), and company quality policies. Train technicians and operators on calibration procedures and proper equipment handling. Maintain inventory and status labeling of calibrated equipment. Required Qualifications Bachelor's degree in Biomedical Engineering, Electronics Engineering, Electrical Engineering, Instrumentation Engineering, Mechanical Engineering, or a related discipline. 2-5 years of experience in calibration, instrumentation, or equipment maintenance within the medical device, pharmaceutical, or healthcare industry. Knowledge of calibration principles for pressure, temperature, humidity, flow, mass, electrical, dimensional, and analytical instruments. Familiarity with calibration management software and computerized maintenance management systems (CMMS). Strong analytical, documentation, and troubleshooting skills. Excellent communication and teamwork abilities. Randstad Business Support is acting as an Employment Business in relation to this vacancy.
Aug 07, 2026
Contractor
Title: Calibration Engineer - Medical Devices Location: Witney Contract Type: 12 months Work Schedule: 37.5 hours per week, Monday to Friday Salary: Competitive package ranging up to £60,000 per annum (depending on experience and the position) Job Summary We are seeking a detail-oriented and technically skilled Calibration Engineer to ensure the accuracy, reliability, and compliance of measurement and testing equipment used in the manufacturing, testing, and maintenance of medical devices. The ideal candidate will be responsible for calibration planning, execution, documentation, troubleshooting, and maintaining compliance with applicable regulatory and quality standards. Key Responsibilities Perform calibration, verification, and preventive maintenance of laboratory, production, and inspection equipment. Develop, implement, and maintain calibration schedules and records. Ensure all measurement equipment complies with internal quality requirements and regulatory standards. Troubleshoot and resolve calibration-related issues to minimize equipment downtime. Review calibration certificates and verify traceability to national or international standards. Coordinate with external accredited calibration laboratories when required. Support equipment qualification activities, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Prepare and maintain calibration procedures, work instructions, and standard operating procedures (SOPs). Participate in internal and external quality audits and support regulatory inspections. Analyze calibration trends and recommend corrective and preventive actions (CAPA). Collaborate with Manufacturing, Quality Assurance, Quality Control, Validation, Engineering, and Maintenance teams. Ensure compliance with Good Manufacturing Practices (GMP), Good Documentation Practices (GDP), and company quality policies. Train technicians and operators on calibration procedures and proper equipment handling. Maintain inventory and status labeling of calibrated equipment. Required Qualifications Bachelor's degree in Biomedical Engineering, Electronics Engineering, Electrical Engineering, Instrumentation Engineering, Mechanical Engineering, or a related discipline. 2-5 years of experience in calibration, instrumentation, or equipment maintenance within the medical device, pharmaceutical, or healthcare industry. Knowledge of calibration principles for pressure, temperature, humidity, flow, mass, electrical, dimensional, and analytical instruments. Familiarity with calibration management software and computerized maintenance management systems (CMMS). Strong analytical, documentation, and troubleshooting skills. Excellent communication and teamwork abilities. Randstad Business Support is acting as an Employment Business in relation to this vacancy.
Field Service & Calibration Engineer Milton Keynes £35 - £40K (Flexible for the right candidate) Monday to Friday 40 Hours per Week Company Vehicle Provided for Site Visits Temp-to-Perm Opportunity The Role We are recruiting for a Field Service & Calibration Engineer to join a specialist engineering organisation based in Milton Keynes. This is a varied role combining workshop-based calibration and repair work with regular travel to customer sites. The successful candidate will be responsible for servicing, maintaining, calibrating and fault-finding on specialist force measurement and testing equipment. Work will be scheduled in advance by the Service Manager, with a mixture of office-based and field-based activities throughout the week. Key Responsibilities Calibration, servicing and maintenance of force measurement and testing equipment Carrying out planned service visits at customer sites Diagnosing mechanical, hydraulic and electronic faults Repairing and replacing components including PCBs where required Using calibration equipment and recording test results Producing calibration certificates and service reports Reading and interpreting technical drawings and engineering documentation Ensuring compliance with relevant testing standards and quality requirements Delivering excellent customer service on-site and remotely Working independently and managing workload effectively Essential Skills & Experience Experience servicing, calibrating or maintaining engineering equipment Good understanding of hydraulic and pneumatic systems Strong mechanical fault-finding skills Computer literate with experience recording and processing data Ability to read and understand technical drawings Full UK Driving Licence Valid Passport and willingness to travel Able to work independently with minimal supervision Physically fit and comfortable handling calibration equipment Professional and confident communicator able to engage with customers at all levels Basic electronics knowledge including: PCB replacement, Use of a multimeter, Fault diagnosis Understanding of: Load Cells, LVDTs, Electronic transducers, Measurement and testing equipment Desirable Calibration experience Experience working within testing, measurement, instrumentation or laboratory equipment industries Understanding of industry standards and compliance requirements Previous field service engineering experience Suitable Backgrounds ️ Field Service Engineer ️ Calibration Engineer ️ Instrumentation Engineer ️ Test & Measurement Engineer ️ Mechanical Service Engineer ️ Maintenance Engineer ️ Electronics Technician ️ Calibration Technician ️ Hydraulic Engineer ️ Ex-Forces Engineer (REME, RAF, Royal Navy) Interested? Send your CV to Call Nikki Carpenter on
Aug 06, 2026
Full time
Field Service & Calibration Engineer Milton Keynes £35 - £40K (Flexible for the right candidate) Monday to Friday 40 Hours per Week Company Vehicle Provided for Site Visits Temp-to-Perm Opportunity The Role We are recruiting for a Field Service & Calibration Engineer to join a specialist engineering organisation based in Milton Keynes. This is a varied role combining workshop-based calibration and repair work with regular travel to customer sites. The successful candidate will be responsible for servicing, maintaining, calibrating and fault-finding on specialist force measurement and testing equipment. Work will be scheduled in advance by the Service Manager, with a mixture of office-based and field-based activities throughout the week. Key Responsibilities Calibration, servicing and maintenance of force measurement and testing equipment Carrying out planned service visits at customer sites Diagnosing mechanical, hydraulic and electronic faults Repairing and replacing components including PCBs where required Using calibration equipment and recording test results Producing calibration certificates and service reports Reading and interpreting technical drawings and engineering documentation Ensuring compliance with relevant testing standards and quality requirements Delivering excellent customer service on-site and remotely Working independently and managing workload effectively Essential Skills & Experience Experience servicing, calibrating or maintaining engineering equipment Good understanding of hydraulic and pneumatic systems Strong mechanical fault-finding skills Computer literate with experience recording and processing data Ability to read and understand technical drawings Full UK Driving Licence Valid Passport and willingness to travel Able to work independently with minimal supervision Physically fit and comfortable handling calibration equipment Professional and confident communicator able to engage with customers at all levels Basic electronics knowledge including: PCB replacement, Use of a multimeter, Fault diagnosis Understanding of: Load Cells, LVDTs, Electronic transducers, Measurement and testing equipment Desirable Calibration experience Experience working within testing, measurement, instrumentation or laboratory equipment industries Understanding of industry standards and compliance requirements Previous field service engineering experience Suitable Backgrounds ️ Field Service Engineer ️ Calibration Engineer ️ Instrumentation Engineer ️ Test & Measurement Engineer ️ Mechanical Service Engineer ️ Maintenance Engineer ️ Electronics Technician ️ Calibration Technician ️ Hydraulic Engineer ️ Ex-Forces Engineer (REME, RAF, Royal Navy) Interested? Send your CV to Call Nikki Carpenter on
ASL Technical are recruiting on behalf of a leading global automotive manufacturer, seeking an experienced vehicle mechanic with experience of modern car electrics, electronics and diagnostic tools to work on the development of future Advanced Driver Assist Systems (ADAS) as a Test and Development Technician to join their UK engineering team. This exciting role involves hands-on vehicle preparation, instrumentation, testing, and validation of cutting-edge driver assistance and diagnostic systems. Key Responsibilities Prepare, build, maintain, and instrument vehicles in line with engineering standards and procedures. Carry out testing in dynamic driving conditions to capture accurate and reliable data. Support evaluation and issue identification in close collaboration with Test Engineers. Set up instrumentation including cameras, radar, and ADAS logging systems. Acquire and analyse data, compiling reports to support engineering teams. Assist with harness fabrication/repair and interpret technical drawings. Work closely with cross-functional engineering teams to deliver projects on time and to high quality. Skills & Experience Required Strong knowledge of vehicle assembly, disassembly, and maintenance techniques. Minimum of 3 years driving experience with a full UK licence (LHD/European driving experience and additional driving qualifications advantageous). Familiarity with vehicle CAN bus systems and fault-finding. Experience with Vector CAN tools desirable but not essential. Knowledge fo vehicle electric harnesses for problem diagnostics and repairs. Proficiency in Microsoft Office (Excel/PowerPoint). Strong organisational skills, able to work independently and to deadlines. Flexible and willing to travel at short notice for up to two weeks (with travel commitments expected to increase). Key Deliverables High-quality preparation, instrumentation, and maintenance of vehicles in line with Nissan Engineering Manuals and local processes. Accurate, timely, and detailed test results to support engineering programmes. Contribution to KPI delivery for the section, with flexibility to support wider engineering activities. Interested? If you re an organised, hands-on technician with experience in automotive diagnostics and ADAS systems, we d love to hear from you. Apply today through ASL Technical and take the next step in your automotive engineering career.
Oct 03, 2025
Contractor
ASL Technical are recruiting on behalf of a leading global automotive manufacturer, seeking an experienced vehicle mechanic with experience of modern car electrics, electronics and diagnostic tools to work on the development of future Advanced Driver Assist Systems (ADAS) as a Test and Development Technician to join their UK engineering team. This exciting role involves hands-on vehicle preparation, instrumentation, testing, and validation of cutting-edge driver assistance and diagnostic systems. Key Responsibilities Prepare, build, maintain, and instrument vehicles in line with engineering standards and procedures. Carry out testing in dynamic driving conditions to capture accurate and reliable data. Support evaluation and issue identification in close collaboration with Test Engineers. Set up instrumentation including cameras, radar, and ADAS logging systems. Acquire and analyse data, compiling reports to support engineering teams. Assist with harness fabrication/repair and interpret technical drawings. Work closely with cross-functional engineering teams to deliver projects on time and to high quality. Skills & Experience Required Strong knowledge of vehicle assembly, disassembly, and maintenance techniques. Minimum of 3 years driving experience with a full UK licence (LHD/European driving experience and additional driving qualifications advantageous). Familiarity with vehicle CAN bus systems and fault-finding. Experience with Vector CAN tools desirable but not essential. Knowledge fo vehicle electric harnesses for problem diagnostics and repairs. Proficiency in Microsoft Office (Excel/PowerPoint). Strong organisational skills, able to work independently and to deadlines. Flexible and willing to travel at short notice for up to two weeks (with travel commitments expected to increase). Key Deliverables High-quality preparation, instrumentation, and maintenance of vehicles in line with Nissan Engineering Manuals and local processes. Accurate, timely, and detailed test results to support engineering programmes. Contribution to KPI delivery for the section, with flexibility to support wider engineering activities. Interested? If you re an organised, hands-on technician with experience in automotive diagnostics and ADAS systems, we d love to hear from you. Apply today through ASL Technical and take the next step in your automotive engineering career.
