Randstad Construction & Property
Bordon, Hampshire
Randstad C&P are working with a national FM client to onboard a Static Multi-Skilled Maintenance Engineer in Hampshire. You will play a crucial role in ensuring the continuous operation, compliance, and safety of a range of hard and soft FM systems across the site. Package 38,000 - 42,500 per annum (depending on experience) Monday to Thursday 08:00 - 17:00, Friday 08:00 - 16:00 Permanent and full-time Generous company pension scheme 33 days annual holidays including bank holidays Duties Deliver PPM and reactive maintenance across site electrical, mechanical, BMS, fire, CCTV, and water hygiene systems using CAFM. Perform fault finding, statutory inspections, testing, calibration, and remedy defects to ensure contract compliance. Act as an Authorised Person (AP) under JSP375 to issue, control, and close permits-to-work and manage isolations. Complete risk assessments and method statements (RAMS) for all tasks, ensuring safe execution, PPE, and tooling compliance. Qualifications Qualified Electrician (18th Edition wiring regulations desirable) C&G 2391/2 Inspection and Testing qualification (training provided if not held) Engineering qualification at BTEC National Diploma or City & Guilds level Valid First Aid at Work certificate Authorised Person (AP) status in electrical and/or mechanical disciplines (training provided if not held) Must be able to gain UK SC Security Clearance Full, valid UK driving licence for car and van Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Aug 03, 2026
Full time
Randstad C&P are working with a national FM client to onboard a Static Multi-Skilled Maintenance Engineer in Hampshire. You will play a crucial role in ensuring the continuous operation, compliance, and safety of a range of hard and soft FM systems across the site. Package 38,000 - 42,500 per annum (depending on experience) Monday to Thursday 08:00 - 17:00, Friday 08:00 - 16:00 Permanent and full-time Generous company pension scheme 33 days annual holidays including bank holidays Duties Deliver PPM and reactive maintenance across site electrical, mechanical, BMS, fire, CCTV, and water hygiene systems using CAFM. Perform fault finding, statutory inspections, testing, calibration, and remedy defects to ensure contract compliance. Act as an Authorised Person (AP) under JSP375 to issue, control, and close permits-to-work and manage isolations. Complete risk assessments and method statements (RAMS) for all tasks, ensuring safe execution, PPE, and tooling compliance. Qualifications Qualified Electrician (18th Edition wiring regulations desirable) C&G 2391/2 Inspection and Testing qualification (training provided if not held) Engineering qualification at BTEC National Diploma or City & Guilds level Valid First Aid at Work certificate Authorised Person (AP) status in electrical and/or mechanical disciplines (training provided if not held) Must be able to gain UK SC Security Clearance Full, valid UK driving licence for car and van Interested? Apply today with an updated CV Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Major Works Project Manager - Canary Wharf Contract: Permanent Hours: 40 per week, Monday to Friday Work from home: Once per week (Friday) Duties & Responsibilities Lead on all stages of project delivery from feasibility, concept and design and manage through to completion and sign-off. The range of projects include internal/external refurbishments, dilapidation and improvement works, M&E systems, insurance works and ad-hoc surveying activities. The range of projects will vary between self-delivery and appointment of an independent/specialist services. Conduct feasibility studies to determine project scope, estimated cost and forecast programme. Carrying out building, condition and measured surveys, defect diagnosis and report writing. Provide project management and contract administration for major works and long-term projects as required. Work to commercial targets for income generation. Other responsibilities include, but not limited to: Lead on project commencement activities for long term maintenance and capital expenditure projects including carrying out building, condition and measured surveys in order to compile scope of works and assist with the development of project specifications. Advise on legal obligations and standards in order to factor requirements into project specification. Advise on requirements for upgrade and major overhaul and refurbishment project works on M&E systems and plant. Preparation of Invitation to Tender packs and lead on negotiation and analysis of tender submissions. Appoint and manage external consultants and specialists as required including third-party building surveyors, structural surveyors, quantity surveyors, etc. Preparation of Schedule of Works and Valuation Schedule. Review M&E dilapidation reports and quoted works alongside the Contracts and Compliance Manager to determine requirements and the most appropriate mode of delivery. Undertake and oversee data collation exercises relating to plant life cycle analysis. Liaise with and advise the Property Management team on the Capital Expenditure Management and coordination of project works from instruction to completion including management of consultants and contractors, management of the project programme and schedule of works, coordination of handover, snagging and asset validation and project sign-off. Required Skills & Experience Highly responsible and decisive with ability to proactively manage own workload. Have strategic expertise and a commercial vision. Comprehensive experience in project management for large scale building projects. Direct experience in schedule preparation and contract administration of building projects. Experience of working in a residential environment (inclusive of high rise) Extensive knowledge of building construction, building services (mechanical and electrical systems) and relevant legislation and standards. Experience in writing works specifications and carrying out competitive tendering exercises. Experience in budget management and working to commercial targets. Educated to degree level in a relevant discipline (building surveying, building services or architecture) or equivalent experience in Building Surveying or a related discipline. Knowledge of principles of fire safety engineering and external wall systems. Member of the Royal Institute of Chartered Surveyors (RICS), Chartered Institution of Building Services Engineers, Chartered Institute of Building or Chartered Association of Building Engineers. Knowledge of facades / external wall systems and principles of fire safety design. Experience with producing and managing multiple projects. Ballymore operates as an equal opportunities employer.
Aug 03, 2026
Full time
Major Works Project Manager - Canary Wharf Contract: Permanent Hours: 40 per week, Monday to Friday Work from home: Once per week (Friday) Duties & Responsibilities Lead on all stages of project delivery from feasibility, concept and design and manage through to completion and sign-off. The range of projects include internal/external refurbishments, dilapidation and improvement works, M&E systems, insurance works and ad-hoc surveying activities. The range of projects will vary between self-delivery and appointment of an independent/specialist services. Conduct feasibility studies to determine project scope, estimated cost and forecast programme. Carrying out building, condition and measured surveys, defect diagnosis and report writing. Provide project management and contract administration for major works and long-term projects as required. Work to commercial targets for income generation. Other responsibilities include, but not limited to: Lead on project commencement activities for long term maintenance and capital expenditure projects including carrying out building, condition and measured surveys in order to compile scope of works and assist with the development of project specifications. Advise on legal obligations and standards in order to factor requirements into project specification. Advise on requirements for upgrade and major overhaul and refurbishment project works on M&E systems and plant. Preparation of Invitation to Tender packs and lead on negotiation and analysis of tender submissions. Appoint and manage external consultants and specialists as required including third-party building surveyors, structural surveyors, quantity surveyors, etc. Preparation of Schedule of Works and Valuation Schedule. Review M&E dilapidation reports and quoted works alongside the Contracts and Compliance Manager to determine requirements and the most appropriate mode of delivery. Undertake and oversee data collation exercises relating to plant life cycle analysis. Liaise with and advise the Property Management team on the Capital Expenditure Management and coordination of project works from instruction to completion including management of consultants and contractors, management of the project programme and schedule of works, coordination of handover, snagging and asset validation and project sign-off. Required Skills & Experience Highly responsible and decisive with ability to proactively manage own workload. Have strategic expertise and a commercial vision. Comprehensive experience in project management for large scale building projects. Direct experience in schedule preparation and contract administration of building projects. Experience of working in a residential environment (inclusive of high rise) Extensive knowledge of building construction, building services (mechanical and electrical systems) and relevant legislation and standards. Experience in writing works specifications and carrying out competitive tendering exercises. Experience in budget management and working to commercial targets. Educated to degree level in a relevant discipline (building surveying, building services or architecture) or equivalent experience in Building Surveying or a related discipline. Knowledge of principles of fire safety engineering and external wall systems. Member of the Royal Institute of Chartered Surveyors (RICS), Chartered Institution of Building Services Engineers, Chartered Institute of Building or Chartered Association of Building Engineers. Knowledge of facades / external wall systems and principles of fire safety design. Experience with producing and managing multiple projects. Ballymore operates as an equal opportunities employer.
HVAC Engineer Location: Gateshead Salary: £43,000 per annum Working Hours: Monday Friday, 06 30 Contract Type: Permanent Sector: Facilities Management Job Overview We are currently recruiting for an experienced HVAC Engineer to join a facilities management team working within a large distribution centre in Gateshead. This is a fantastic opportunity for a skilled HVAC professional to join a stable, site-based role with a leading facilities management provider. The successful candidate will be responsible for carrying out planned and reactive maintenance across a range of HVAC systems and associated building services, ensuring the site remains operational, safe, and compliant. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive maintenance on HVAC systems Diagnose faults and complete repairs across heating, ventilation, and air conditioning equipment Service, inspect, and maintain HVAC plant and associated mechanical systems Maintain and repair AHUs, FCUs, ventilation systems, pumps, valves, and associated equipment Respond to breakdowns and carry out effective fault finding to minimise disruption to site operations Complete maintenance records, job sheets, and reports accurately Work closely with the wider engineering team and site management to ensure service levels are maintained Ensure all works are completed safely and in line with health & safety procedures and site requirements Requirements Previous experience working as an HVAC Engineer within a commercial, industrial, or FM environment Strong knowledge of HVAC systems, including air conditioning, ventilation, and mechanical plant Experience delivering both planned and reactive maintenance Ability to fault find, diagnose, and resolve technical issues efficiently Good understanding of building services and maintenance environments Strong communication skills with the ability to work independently on site Qualifications NVQ Level 2/3 or equivalent in HVAC, Refrigeration, Mechanical Engineering, or Building Services F-Gas qualification essential Relevant HVAC/refrigeration qualifications desirable Package & Benefits Salary of £43,000 per annum Monday Friday, 06 30 working hours Permanent, site-based position Working within a large distribution centre environment Long-term career opportunity with a leading facilities management provider Training and development opportunities available
Aug 03, 2026
Full time
HVAC Engineer Location: Gateshead Salary: £43,000 per annum Working Hours: Monday Friday, 06 30 Contract Type: Permanent Sector: Facilities Management Job Overview We are currently recruiting for an experienced HVAC Engineer to join a facilities management team working within a large distribution centre in Gateshead. This is a fantastic opportunity for a skilled HVAC professional to join a stable, site-based role with a leading facilities management provider. The successful candidate will be responsible for carrying out planned and reactive maintenance across a range of HVAC systems and associated building services, ensuring the site remains operational, safe, and compliant. Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive maintenance on HVAC systems Diagnose faults and complete repairs across heating, ventilation, and air conditioning equipment Service, inspect, and maintain HVAC plant and associated mechanical systems Maintain and repair AHUs, FCUs, ventilation systems, pumps, valves, and associated equipment Respond to breakdowns and carry out effective fault finding to minimise disruption to site operations Complete maintenance records, job sheets, and reports accurately Work closely with the wider engineering team and site management to ensure service levels are maintained Ensure all works are completed safely and in line with health & safety procedures and site requirements Requirements Previous experience working as an HVAC Engineer within a commercial, industrial, or FM environment Strong knowledge of HVAC systems, including air conditioning, ventilation, and mechanical plant Experience delivering both planned and reactive maintenance Ability to fault find, diagnose, and resolve technical issues efficiently Good understanding of building services and maintenance environments Strong communication skills with the ability to work independently on site Qualifications NVQ Level 2/3 or equivalent in HVAC, Refrigeration, Mechanical Engineering, or Building Services F-Gas qualification essential Relevant HVAC/refrigeration qualifications desirable Package & Benefits Salary of £43,000 per annum Monday Friday, 06 30 working hours Permanent, site-based position Working within a large distribution centre environment Long-term career opportunity with a leading facilities management provider Training and development opportunities available
Mechanical Engineer/Fitter Liverpool Monday to Friday Up to £43,000 Additional Hours If Required We are looking for a motivated Mechanical Engineer to join a market leading processing company within their field. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description: Providing both Reactive & PPM maintenance Machine Breakdowns Hydraulics, Pneumatics Sensors, Drives, Relays, Inverters Conveyors, Bearings, Belts, Chains Adhering To All Health & Safety on Site Skills and Qualifications: Maintenance Experience Mechanical Qualifications Desirable Mechanical Experience Desirable In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please send your CV directly to Morgan Blount at or call for a confidential discussion on .
Aug 03, 2026
Full time
Mechanical Engineer/Fitter Liverpool Monday to Friday Up to £43,000 Additional Hours If Required We are looking for a motivated Mechanical Engineer to join a market leading processing company within their field. Reporting directly to the engineering manager you will be a key member in ensuring the production facility is kept running. You will be involved in all aspects of planned and reactive maintenance within their operation. With progressive training and development this company is always looking to enhance its employees and their skill sets, whilst additionally being supported by a welcoming team of engineers. The position will appeal to a strong engineer looking for their next challenging role within in a secure and stable company. Role Description: Providing both Reactive & PPM maintenance Machine Breakdowns Hydraulics, Pneumatics Sensors, Drives, Relays, Inverters Conveyors, Bearings, Belts, Chains Adhering To All Health & Safety on Site Skills and Qualifications: Maintenance Experience Mechanical Qualifications Desirable Mechanical Experience Desirable In return for your commitment my client offers a stable and secure career for a technically motivated engineer. If you feel this is of interest, please send your CV directly to Morgan Blount at or call for a confidential discussion on .
Hamilton Ross Group
Berwick-upon-tweed, Northumberland
Job Summary Hamilton Ross Group is one of Scotland's leading suppliers of agricultural, groundcare and construction machinery, representing world class brands across Scotland and Northern England. As our business continues to grow, we are looking for experienced and motivated Agricultural Service Engineers to join our workshop teams across our Tarbolton, Lanark, Cupar, Berwick, Macmerry and Kelso depots. This is an opportunity to join a successful and forward thinking business, working with industry leading machinery and the latest diagnostic technology. The Role As an Agricultural Service Engineer, you will be responsible for the servicing, maintenance and repair of agricultural machinery, ensuring customers receive the highest standards of technical support and service. Working within a busy workshop environment, you will diagnose faults, carry out repairs and prepare machinery to manufacturer standards. Key Responsibilities Service, maintain and repair agricultural machinery and equipment Diagnose and rectify mechanical, hydraulic and electrical faults Use manufacturer diagnostic software and specialist tools Complete machinery inspections and condition reports Prepare new and used machinery for customer delivery Ensure all work is completed safely and efficiently Maintain accurate service records and documentation Support colleagues and contribute to a productive workshop environment What We Are Looking For We are seeking engineers with: Previous experience in agricultural engineering, plant, construction equipment, HGV, commercial vehicle or similar sectors Strong mechanical, hydraulic and electrical diagnostic skills The ability to work independently and manage workloads effectively A positive attitude and commitment to delivering excellent customer service Good communication and problem solving skills A full UK driving licence Whether you are an experienced Agricultural Engineer or looking to transfer your skills from another machinery sector, we would like to hear from you. Why Hamilton Ross Group? Work with some of the industry's leading machinery brands Competitive salary based on experience Overtime opportunities available Manufacturer training and technical support Modern workshop facilities and diagnostic equipment Career progression opportunities within a growing business Supportive and experienced team environment Job security with one of Scotland's most successful machinery dealerships About Us Hamilton Ross Group is proud to be recognised in the inaugural Scotsman Insider 500 as one of Scotland's top performing companies by profit and turnover. Our success is built on the quality of our people, our customer focused approach and our commitment to investing in the future of our business. Apply Now If you are a skilled engineer looking for your next challenge, we would love to hear from you. Join Hamilton Ross Group and build your future with one of the UK's leading agricultural machinery dealerships. Benefits: Company pension Employee discount Free parking On-site parking Work Location: In person
Aug 03, 2026
Full time
Job Summary Hamilton Ross Group is one of Scotland's leading suppliers of agricultural, groundcare and construction machinery, representing world class brands across Scotland and Northern England. As our business continues to grow, we are looking for experienced and motivated Agricultural Service Engineers to join our workshop teams across our Tarbolton, Lanark, Cupar, Berwick, Macmerry and Kelso depots. This is an opportunity to join a successful and forward thinking business, working with industry leading machinery and the latest diagnostic technology. The Role As an Agricultural Service Engineer, you will be responsible for the servicing, maintenance and repair of agricultural machinery, ensuring customers receive the highest standards of technical support and service. Working within a busy workshop environment, you will diagnose faults, carry out repairs and prepare machinery to manufacturer standards. Key Responsibilities Service, maintain and repair agricultural machinery and equipment Diagnose and rectify mechanical, hydraulic and electrical faults Use manufacturer diagnostic software and specialist tools Complete machinery inspections and condition reports Prepare new and used machinery for customer delivery Ensure all work is completed safely and efficiently Maintain accurate service records and documentation Support colleagues and contribute to a productive workshop environment What We Are Looking For We are seeking engineers with: Previous experience in agricultural engineering, plant, construction equipment, HGV, commercial vehicle or similar sectors Strong mechanical, hydraulic and electrical diagnostic skills The ability to work independently and manage workloads effectively A positive attitude and commitment to delivering excellent customer service Good communication and problem solving skills A full UK driving licence Whether you are an experienced Agricultural Engineer or looking to transfer your skills from another machinery sector, we would like to hear from you. Why Hamilton Ross Group? Work with some of the industry's leading machinery brands Competitive salary based on experience Overtime opportunities available Manufacturer training and technical support Modern workshop facilities and diagnostic equipment Career progression opportunities within a growing business Supportive and experienced team environment Job security with one of Scotland's most successful machinery dealerships About Us Hamilton Ross Group is proud to be recognised in the inaugural Scotsman Insider 500 as one of Scotland's top performing companies by profit and turnover. Our success is built on the quality of our people, our customer focused approach and our commitment to investing in the future of our business. Apply Now If you are a skilled engineer looking for your next challenge, we would love to hear from you. Join Hamilton Ross Group and build your future with one of the UK's leading agricultural machinery dealerships. Benefits: Company pension Employee discount Free parking On-site parking Work Location: In person
Laser Setter Operator Location: Dudley Job Type: Full-Time, Permanent Hours: 40 hours per week (Alternating Shift Pattern) Pay: £14.00 per hour (Morning Shift) / £14.50 per hour (Afternoon Shift) Pay Frequency: Weekly We are looking for an experienced Laser Setter Operator to join our busy manufacturing team. This is a hands-on role within a fast-paced production environment where quality, efficiency and safety are key. The successful candidate will be responsible for setting and operating laser cutting machines, ensuring production schedules are met while maintaining high standards of quality. You will work closely with the production team to ensure materials are processed accurately and customer orders are completed on time. Key Responsibilities: Setting up laser cutting machines for production runs, ensuring the correct programmes, tooling and materials are used. Operating laser machinery safely and efficiently throughout the shift. Loading and unloading sheet metal and finished components using appropriate handling equipment. Monitoring machine performance and making adjustments where required to maintain product quality. Carrying out routine quality checks to ensure parts meet customer specifications and company standards. Inspecting finished components for defects or inconsistencies before they move to the next stage of production. Sorting, identifying and organising finished parts ready for dispatch to customers. Working from engineering drawings, job sheets and production instructions. Reporting machine faults, material shortages or production issues promptly to the relevant supervisor. Performing basic machine cleaning and routine maintenance to keep equipment in good working order. Following all health and safety procedures and maintaining a clean, organised and safe working environment. Supporting colleagues and assisting in other production areas when required to meet business demands. What to Expect: A fast-paced production setting where meeting deadlines is important. Standing and walking for the majority of your shift. Manual handling and occasional heavy lifting. Working with sheet metal, laser cutting equipment and production machinery. Working as part of a supportive team while also being capable of working independently. Full training on company procedures and systems, although previous laser machine experience is essential. Successful Candidates will have: Previous experience setting and operating laser cutting machines. Good attention to detail and commitment to producing high-quality work. Ability to read and follow engineering drawings and production instructions. Good understanding of health and safety within a manufacturing environment. Reliable, punctual and able to work effectively within a team. Counterbalance Forklift Licence (preferred but not essential). Previous experience within a sheet metal or fabrication environment. Basic mechanical knowledge and confidence carrying out minor machine adjustments Working Hours: Morning Shift - Monday to Friday: 6:00am - 2:30pm Afternoon Shift - Monday to Thursday: 2:00pm - 11:30pm, Friday: 2:00pm - 6:00pm What We Offer Competitive hourly rates. Weekly pay. Full-time permanent employment. 40 hours per week. Opportunity to join a well-established manufacturing business. Supportive team environment. Ongoing training and development opportunities. If you have previous laser setting and operating experience and are looking to join a company where your skills are valued, we'd love to hear from you. Apply today by submitting your CV.
Aug 03, 2026
Full time
Laser Setter Operator Location: Dudley Job Type: Full-Time, Permanent Hours: 40 hours per week (Alternating Shift Pattern) Pay: £14.00 per hour (Morning Shift) / £14.50 per hour (Afternoon Shift) Pay Frequency: Weekly We are looking for an experienced Laser Setter Operator to join our busy manufacturing team. This is a hands-on role within a fast-paced production environment where quality, efficiency and safety are key. The successful candidate will be responsible for setting and operating laser cutting machines, ensuring production schedules are met while maintaining high standards of quality. You will work closely with the production team to ensure materials are processed accurately and customer orders are completed on time. Key Responsibilities: Setting up laser cutting machines for production runs, ensuring the correct programmes, tooling and materials are used. Operating laser machinery safely and efficiently throughout the shift. Loading and unloading sheet metal and finished components using appropriate handling equipment. Monitoring machine performance and making adjustments where required to maintain product quality. Carrying out routine quality checks to ensure parts meet customer specifications and company standards. Inspecting finished components for defects or inconsistencies before they move to the next stage of production. Sorting, identifying and organising finished parts ready for dispatch to customers. Working from engineering drawings, job sheets and production instructions. Reporting machine faults, material shortages or production issues promptly to the relevant supervisor. Performing basic machine cleaning and routine maintenance to keep equipment in good working order. Following all health and safety procedures and maintaining a clean, organised and safe working environment. Supporting colleagues and assisting in other production areas when required to meet business demands. What to Expect: A fast-paced production setting where meeting deadlines is important. Standing and walking for the majority of your shift. Manual handling and occasional heavy lifting. Working with sheet metal, laser cutting equipment and production machinery. Working as part of a supportive team while also being capable of working independently. Full training on company procedures and systems, although previous laser machine experience is essential. Successful Candidates will have: Previous experience setting and operating laser cutting machines. Good attention to detail and commitment to producing high-quality work. Ability to read and follow engineering drawings and production instructions. Good understanding of health and safety within a manufacturing environment. Reliable, punctual and able to work effectively within a team. Counterbalance Forklift Licence (preferred but not essential). Previous experience within a sheet metal or fabrication environment. Basic mechanical knowledge and confidence carrying out minor machine adjustments Working Hours: Morning Shift - Monday to Friday: 6:00am - 2:30pm Afternoon Shift - Monday to Thursday: 2:00pm - 11:30pm, Friday: 2:00pm - 6:00pm What We Offer Competitive hourly rates. Weekly pay. Full-time permanent employment. 40 hours per week. Opportunity to join a well-established manufacturing business. Supportive team environment. Ongoing training and development opportunities. If you have previous laser setting and operating experience and are looking to join a company where your skills are valued, we'd love to hear from you. Apply today by submitting your CV.
Up to £40,000+ per annum basic salary + Voluntary Overtime + Mercedes Vito van for Work Use (and can opt in for Private Use) + Mobile & Tablet + 36 Days Annual Leave made up of 23 days Holiday + 5 Loyalty days + 8 bank holidays + 4% Employer Pension Contribution 45 Hours per Week - Mon to Fri 08:00 to 17:00 There are no overnight stays except for training requirements, and no call outs. Overtime is available but it's entirely voluntary. Paid door to door, and paid lunchbreaks. As a Field Service Engineer, you'll be tasked with delivering expert technical support and maintenance for our clients' garage equipment and automotive workshops. Your core responsibilities will include: Diagnosing and repairing a broad range of garage equipment, including vehicle lifts, wheel balancers, tyre changers, and diagnostic tools. Conducting scheduled preventive maintenance to ensure client equipment operates at peak performance and enjoys an extended lifespan. Providing on-site training and support, guiding clients on the proper operation and upkeep of their machinery. Keeping thorough records of all service activities and delivering detailed reports to the management team. Collaborating with both sales and customer service teams to meet client needs and offer suggestions for equipment upgrades or replacements. Experience Required: 1-3 years of experience in servicing and repairing garage equipment. Familiarity with various types of garage machinery such as lifts, tire changers, and diagnostic tools. Applicants with either service or installation experience will be considered. A strong willingness to learn and the ability to work independently. Solid problem-solving skills combined with a practical approach. A full UK Driving Licence. Skills: Excellent mechanical and electrical troubleshooting abilities. Proficient in reading and interpreting technical manuals and diagrams. Strong communication and customer service skills. Ability to work both independently and as an integral part of a team. Job Types: Full-time, Permanent Pay: £32,300.00-£40,000.00 per year Benefits: Additional leave Company pension Work Location: On the road
Aug 03, 2026
Full time
Up to £40,000+ per annum basic salary + Voluntary Overtime + Mercedes Vito van for Work Use (and can opt in for Private Use) + Mobile & Tablet + 36 Days Annual Leave made up of 23 days Holiday + 5 Loyalty days + 8 bank holidays + 4% Employer Pension Contribution 45 Hours per Week - Mon to Fri 08:00 to 17:00 There are no overnight stays except for training requirements, and no call outs. Overtime is available but it's entirely voluntary. Paid door to door, and paid lunchbreaks. As a Field Service Engineer, you'll be tasked with delivering expert technical support and maintenance for our clients' garage equipment and automotive workshops. Your core responsibilities will include: Diagnosing and repairing a broad range of garage equipment, including vehicle lifts, wheel balancers, tyre changers, and diagnostic tools. Conducting scheduled preventive maintenance to ensure client equipment operates at peak performance and enjoys an extended lifespan. Providing on-site training and support, guiding clients on the proper operation and upkeep of their machinery. Keeping thorough records of all service activities and delivering detailed reports to the management team. Collaborating with both sales and customer service teams to meet client needs and offer suggestions for equipment upgrades or replacements. Experience Required: 1-3 years of experience in servicing and repairing garage equipment. Familiarity with various types of garage machinery such as lifts, tire changers, and diagnostic tools. Applicants with either service or installation experience will be considered. A strong willingness to learn and the ability to work independently. Solid problem-solving skills combined with a practical approach. A full UK Driving Licence. Skills: Excellent mechanical and electrical troubleshooting abilities. Proficient in reading and interpreting technical manuals and diagrams. Strong communication and customer service skills. Ability to work both independently and as an integral part of a team. Job Types: Full-time, Permanent Pay: £32,300.00-£40,000.00 per year Benefits: Additional leave Company pension Work Location: On the road
Aircraft Ground Equipment Technician Location: Dhahran, Saudi Arabia Programme: RSAF Tornado Contract Opportunity Overview A critical role. An iconic aircraft. A programme built on engineering excellence. Morson Edge is recruiting Aircraft Ground Equipment Technicians to support a major Tornado aircraft maintenance programme in Dhahran, Saudi Arabia. This is an excellent opportunity for experienced AGE, electrical, plant, or support equipment technicians to join a highly skilled engineering team supporting one of the world's largest operational Tornado fleets. Behind every successful aircraft maintenance programme is reliable Ground Support Equipment. Working within the AGE facility, you will ensure specialist equipment remains maintained, serviceable, and available to support aircraft generation, maintenance activity, and operational requirements. Previous Tornado experience is not required we are interested in speaking with engineers from a range of technical backgrounds with strong electrical, mechanical, hydraulic, or pneumatic maintenance experience. Why Consider This Opportunity? Support one of the world's largest remaining Tornado operations Work within an established military aviation environment Join a highly experienced multinational engineering team Varied electrical, mechanical, hydraulic, and pneumatic maintenance work Play a key role in keeping aircraft operations moving Opportunity to apply plant, industrial, or aviation maintenance experience Overseas assignment within a professional defence environment Additional Benefits Successful candidates will receive support throughout the assignment, including: Accommodation support Flights Visa support Weekly payment Access to onsite facilities Further information regarding deployment, accommodation, leave periods, and assignment logistics will be provided during the recruitment process. The Role Reporting to the AGE Supervisor, you will carry out scheduled and unscheduled maintenance activities on Aircraft Ground Equipment supporting Tornado operations. You will be responsible for maintaining equipment availability through inspection, servicing, fault diagnosis, repair, and preventative maintenance activities. The role offers a varied engineering environment, combining electrical systems, mechanical equipment, hydraulics, pneumatics, and operational support. Key Responsibilities Aircraft Ground Equipment Maintenance Carry out scheduled and unscheduled AGE maintenance activities Diagnose and repair electrical, hydraulic, pneumatic, and mechanical faults Maintain specialist equipment supporting aircraft operations Ensure equipment remains safe, compliant, and operationally available Carry out preventative maintenance and inspections Maintain workshop tools and equipment Ensure calibration requirements are followed Operational Support Support Tornado flying and maintenance operations Assist squadron requirements where needed Maintain equipment readiness for operational demands Provide standby support when required Quality & Safety Follow approved engineering procedures and safety standards Maintain accurate maintenance records Use electronic maintenance systems correctly Support FOD prevention and good housekeeping standards Maintain compliance with quality requirements Training & Development Support and mentor engineering personnel where required Provide technical guidance across equipment maintenance activities Share engineering knowledge and best practice Essential Requirements ONC qualification in Electrical Engineering or equivalent experience Strong electrical maintenance knowledge Experience fault finding on complex equipment PLC maintenance experience Ability to interpret engineering drawings and technical documentation Strong understanding of engineering safety procedures Desirable Experience Aircraft Ground Equipment (AGE) experience RAF, military, or defence engineering background Plant maintenance experience Hydraulic and pneumatic system experience Aerospace maintenance environment experience Experience working with maintenance procedures and documentation The Setting Dhahran, Saudi Arabia RSAF Tornado support programme Specialist Aircraft Ground Equipment facility Established military aviation environment Experienced multinational workforce Long-term operational aircraft support Ready for Your Next Assignment? If you have experience maintaining Aircraft Ground Equipment, electrical systems, plant equipment, or complex engineering assets and would like to support a major international aviation programme, we'd like to hear from you. Apply now or contact Morson Edge for a confidential discussion.
Aug 03, 2026
Contractor
Aircraft Ground Equipment Technician Location: Dhahran, Saudi Arabia Programme: RSAF Tornado Contract Opportunity Overview A critical role. An iconic aircraft. A programme built on engineering excellence. Morson Edge is recruiting Aircraft Ground Equipment Technicians to support a major Tornado aircraft maintenance programme in Dhahran, Saudi Arabia. This is an excellent opportunity for experienced AGE, electrical, plant, or support equipment technicians to join a highly skilled engineering team supporting one of the world's largest operational Tornado fleets. Behind every successful aircraft maintenance programme is reliable Ground Support Equipment. Working within the AGE facility, you will ensure specialist equipment remains maintained, serviceable, and available to support aircraft generation, maintenance activity, and operational requirements. Previous Tornado experience is not required we are interested in speaking with engineers from a range of technical backgrounds with strong electrical, mechanical, hydraulic, or pneumatic maintenance experience. Why Consider This Opportunity? Support one of the world's largest remaining Tornado operations Work within an established military aviation environment Join a highly experienced multinational engineering team Varied electrical, mechanical, hydraulic, and pneumatic maintenance work Play a key role in keeping aircraft operations moving Opportunity to apply plant, industrial, or aviation maintenance experience Overseas assignment within a professional defence environment Additional Benefits Successful candidates will receive support throughout the assignment, including: Accommodation support Flights Visa support Weekly payment Access to onsite facilities Further information regarding deployment, accommodation, leave periods, and assignment logistics will be provided during the recruitment process. The Role Reporting to the AGE Supervisor, you will carry out scheduled and unscheduled maintenance activities on Aircraft Ground Equipment supporting Tornado operations. You will be responsible for maintaining equipment availability through inspection, servicing, fault diagnosis, repair, and preventative maintenance activities. The role offers a varied engineering environment, combining electrical systems, mechanical equipment, hydraulics, pneumatics, and operational support. Key Responsibilities Aircraft Ground Equipment Maintenance Carry out scheduled and unscheduled AGE maintenance activities Diagnose and repair electrical, hydraulic, pneumatic, and mechanical faults Maintain specialist equipment supporting aircraft operations Ensure equipment remains safe, compliant, and operationally available Carry out preventative maintenance and inspections Maintain workshop tools and equipment Ensure calibration requirements are followed Operational Support Support Tornado flying and maintenance operations Assist squadron requirements where needed Maintain equipment readiness for operational demands Provide standby support when required Quality & Safety Follow approved engineering procedures and safety standards Maintain accurate maintenance records Use electronic maintenance systems correctly Support FOD prevention and good housekeeping standards Maintain compliance with quality requirements Training & Development Support and mentor engineering personnel where required Provide technical guidance across equipment maintenance activities Share engineering knowledge and best practice Essential Requirements ONC qualification in Electrical Engineering or equivalent experience Strong electrical maintenance knowledge Experience fault finding on complex equipment PLC maintenance experience Ability to interpret engineering drawings and technical documentation Strong understanding of engineering safety procedures Desirable Experience Aircraft Ground Equipment (AGE) experience RAF, military, or defence engineering background Plant maintenance experience Hydraulic and pneumatic system experience Aerospace maintenance environment experience Experience working with maintenance procedures and documentation The Setting Dhahran, Saudi Arabia RSAF Tornado support programme Specialist Aircraft Ground Equipment facility Established military aviation environment Experienced multinational workforce Long-term operational aircraft support Ready for Your Next Assignment? If you have experience maintaining Aircraft Ground Equipment, electrical systems, plant equipment, or complex engineering assets and would like to support a major international aviation programme, we'd like to hear from you. Apply now or contact Morson Edge for a confidential discussion.
Ernest Gordon Recruitment Limited
Tewkesbury, Gloucestershire
Field Engineer (Mechanical / Hydraulic) £17 - £20 Per Hour + 30 Days Holiday + 4 Day Work Week + Door to Door Pay + Training + Company Van + Fuel Card + Overtime + Commission + Bonus + Company Social Events Tewkesbury Are you a Field Service Engineer, who has good mechanical and hydraulic knowledge, looking to join a family-run manufacturer, who offer excellent training and UK wide travel? The company on offer specialise in the manufacture, installation and service of automotive recycling equipment. This includes depollution systems and dismantling equipment. Your role will be 95% field based, travelling to sites across the UK and Ireland. You will install, service, maintain and repair mechanical, hydraulic, pneumatic and electrical recycling equipment. Travel to office once a week will be required to collect stock. Hotels and meal allowances will be provided where needed. Full training on all products will be given, additionally training on compressors and vehicle lifts can be arranged. The suitable candidate will be a Mobile Engineer, who is proficient in mechanical and hydraulic systems. The Role Installation, servicing, maintenance and repair of automotive recycling equipment Diagnose faults across mechanical, hydraulic, pneumatic, and electrical systems Travelling to sites across the UK and Ireland Attending office once a week to collect stock Monday to Thursday, 7:30 - 5:30 The Person Experience working with mechanical and hydraulic systems Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26350a We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Aug 03, 2026
Full time
Field Engineer (Mechanical / Hydraulic) £17 - £20 Per Hour + 30 Days Holiday + 4 Day Work Week + Door to Door Pay + Training + Company Van + Fuel Card + Overtime + Commission + Bonus + Company Social Events Tewkesbury Are you a Field Service Engineer, who has good mechanical and hydraulic knowledge, looking to join a family-run manufacturer, who offer excellent training and UK wide travel? The company on offer specialise in the manufacture, installation and service of automotive recycling equipment. This includes depollution systems and dismantling equipment. Your role will be 95% field based, travelling to sites across the UK and Ireland. You will install, service, maintain and repair mechanical, hydraulic, pneumatic and electrical recycling equipment. Travel to office once a week will be required to collect stock. Hotels and meal allowances will be provided where needed. Full training on all products will be given, additionally training on compressors and vehicle lifts can be arranged. The suitable candidate will be a Mobile Engineer, who is proficient in mechanical and hydraulic systems. The Role Installation, servicing, maintenance and repair of automotive recycling equipment Diagnose faults across mechanical, hydraulic, pneumatic, and electrical systems Travelling to sites across the UK and Ireland Attending office once a week to collect stock Monday to Thursday, 7:30 - 5:30 The Person Experience working with mechanical and hydraulic systems Full UK driving license If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26350a We are an equal opportunity employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Live Built Manufacturing Technician Certain Advantage is hiring for a Live Built Manufacturing Technician based in Henlow area .This role is on a contract basis and is site-based. The CompanyWe're working with a world-class Manufacturing business that operates in the Defense sector.Does this sound like your next career move?If you're ambitious to grow, this may be your next role?Would you like to be responsible for carrying out manufacturing, test and inspection tasks within the Live Build Facility?The Role:This role is for a Live Built Manufacturing Technician-someone ambitious and ready to make an impact. You'll be results-oriented and driven to succeed.You'll be working in a small, experienced, and collaborative team, and be responsible for: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Ensure manufacturing build, inspection and where relevant, test times are met. Maintain to the highest level, workmanship standards and product quality. The Individual We're looking for people who can show: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational NVQ3 with Further Education, BTEC ONC/HNC in a relevant Engineering/Manufacturing Subject Mechanical fitting/maintenance in a highly regulated sector The Benefits: Hourly rate of up to £29.70 per hour via an Umbrella company Training and Development Does this sound like your next career move? Apply today.Working with Certain AdvantageWe go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it.We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn't for you, head to certainadvantage.co.uk and register for job alerts and career guidance tips.
Aug 03, 2026
Seasonal
Live Built Manufacturing Technician Certain Advantage is hiring for a Live Built Manufacturing Technician based in Henlow area .This role is on a contract basis and is site-based. The CompanyWe're working with a world-class Manufacturing business that operates in the Defense sector.Does this sound like your next career move?If you're ambitious to grow, this may be your next role?Would you like to be responsible for carrying out manufacturing, test and inspection tasks within the Live Build Facility?The Role:This role is for a Live Built Manufacturing Technician-someone ambitious and ready to make an impact. You'll be results-oriented and driven to succeed.You'll be working in a small, experienced, and collaborative team, and be responsible for: Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Ensure manufacturing build, inspection and where relevant, test times are met. Maintain to the highest level, workmanship standards and product quality. The Individual We're looking for people who can show: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational NVQ3 with Further Education, BTEC ONC/HNC in a relevant Engineering/Manufacturing Subject Mechanical fitting/maintenance in a highly regulated sector The Benefits: Hourly rate of up to £29.70 per hour via an Umbrella company Training and Development Does this sound like your next career move? Apply today.Working with Certain AdvantageWe go the extra mile to find the best people for the job. If you're hunting for a role where you can make an impact and grow your career, we'll work with you to find it.We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isn't for you, head to certainadvantage.co.uk and register for job alerts and career guidance tips.
Field Service Engineer (Calibration & Test Equipment) Milton Keynes £35,000-£40,000 DOE (flexibility for the right candidate) Monday to Friday 40 hours per week Company vehicle provided for all customer site visits Split between workshop and customer sites ️ UK and international travel required as part of the role - a valid passport is essential Temp-to-perm opportunity About the Role We're recruiting for a Field Service Engineer (Calibration & Test Equipment) to join a specialist engineering business based in Milton Keynes. Our client is a well-established, internationally recognised engineering business with more than 60 years of experience designing, manufacturing and supporting specialist testing and measurement equipment. Their products are trusted by customers across a wide range of industries where precision, reliability and quality are essential. Operating on a global scale, the company supports customers throughout the UK and overseas, providing installation, calibration, maintenance and technical support for a comprehensive range of specialist equipment. With a strong reputation for engineering excellence and innovation, they continue to invest in new technologies and are committed to delivering exceptional customer service. Joining the business offers the opportunity to work with advanced testing and measurement systems, travel to a diverse range of customer sites across the UK and internationally, and become part of a knowledgeable and supportive engineering team where no two days are the same. This is an excellent opportunity for an engineer with strong mechanical fault-finding skills who enjoys a varied role combining workshop-based repairs with customer site visits. You'll service, maintain, repair and calibrate specialist force measurement and testing equipment while delivering first-class customer support. The role is split between the workshop and customer sites, with regular travel throughout the UK and occasional international travel. As part of the role, you'll need a valid passport and be happy travelling when required. If you have experience in field service, maintenance, calibration, instrumentation or test equipment and are looking to further develop your engineering career, we'd love to hear from you. What You'll Be Doing Service, maintain and calibrate specialist force measurement and testing equipment. Carry out planned preventative maintenance and repairs at customer sites. Travel to customer locations throughout the UK and internationally as required. Diagnose mechanical, hydraulic and basic electronic faults. Replace components, including PCBs where required. Use calibration equipment and accurately record test data. Produce calibration certificates and detailed service reports. Read and interpret engineering drawings and technical documentation. Ensure all work complies with relevant testing standards and quality requirements. Build positive relationships with customers and provide professional technical support. Manage your own workload while working independently both on-site and in the workshop. What We're Looking For We're keen to speak with engineers who have experience servicing, maintaining or repairing engineering equipment. You don't need direct experience with the client's specific products, but you should have a strong engineering background and be confident diagnosing mechanical faults. Essential Skills & Experience Experience servicing, maintaining or calibrating engineering equipment. Strong mechanical fault-finding skills. Good understanding of hydraulic and pneumatic systems. Basic electronics knowledge, including the use of a multimeter and PCB replacement. Ability to read and interpret technical drawings. Good IT skills with experience producing reports and recording calibration data. Full UK driving licence. Valid passport and willingness to travel throughout the UK and internationally. Professional and confident communication skills with the ability to build relationships with customers at all levels. Ability to work independently and manage your own workload. Good level of physical fitness, as some calibration equipment requires manual handling. Desirable Experience Experience in any of the following would be advantageous: Force measurement or test equipment. Calibration or instrumentation. Load cells, LVDTs or electronic transducers. Testing or laboratory equipment. Engineering standards and compliance requirements. Previous field service experience. Suitable Backgrounds This role would suit candidates with experience as a: Field Service Engineer Calibration Engineer Calibration Technician Service Engineer Instrumentation Engineer Test & Measurement Engineer Mechanical Maintenance Engineer Multi-skilled Maintenance Engineer Electronics Technician Hydraulic Engineer Ex-Forces Engineer (REME, RAF or Royal Navy) What's on Offer? £35,000-£40,000 salary , with flexibility for the right experience. Monday to Friday working pattern. Company vehicle provided for all customer visits. A varied role combining workshop-based work with field service. Opportunity to work with specialist force measurement and calibration equipment. UK and international travel. Interested? To find out more or apply, contact:
Aug 03, 2026
Full time
Field Service Engineer (Calibration & Test Equipment) Milton Keynes £35,000-£40,000 DOE (flexibility for the right candidate) Monday to Friday 40 hours per week Company vehicle provided for all customer site visits Split between workshop and customer sites ️ UK and international travel required as part of the role - a valid passport is essential Temp-to-perm opportunity About the Role We're recruiting for a Field Service Engineer (Calibration & Test Equipment) to join a specialist engineering business based in Milton Keynes. Our client is a well-established, internationally recognised engineering business with more than 60 years of experience designing, manufacturing and supporting specialist testing and measurement equipment. Their products are trusted by customers across a wide range of industries where precision, reliability and quality are essential. Operating on a global scale, the company supports customers throughout the UK and overseas, providing installation, calibration, maintenance and technical support for a comprehensive range of specialist equipment. With a strong reputation for engineering excellence and innovation, they continue to invest in new technologies and are committed to delivering exceptional customer service. Joining the business offers the opportunity to work with advanced testing and measurement systems, travel to a diverse range of customer sites across the UK and internationally, and become part of a knowledgeable and supportive engineering team where no two days are the same. This is an excellent opportunity for an engineer with strong mechanical fault-finding skills who enjoys a varied role combining workshop-based repairs with customer site visits. You'll service, maintain, repair and calibrate specialist force measurement and testing equipment while delivering first-class customer support. The role is split between the workshop and customer sites, with regular travel throughout the UK and occasional international travel. As part of the role, you'll need a valid passport and be happy travelling when required. If you have experience in field service, maintenance, calibration, instrumentation or test equipment and are looking to further develop your engineering career, we'd love to hear from you. What You'll Be Doing Service, maintain and calibrate specialist force measurement and testing equipment. Carry out planned preventative maintenance and repairs at customer sites. Travel to customer locations throughout the UK and internationally as required. Diagnose mechanical, hydraulic and basic electronic faults. Replace components, including PCBs where required. Use calibration equipment and accurately record test data. Produce calibration certificates and detailed service reports. Read and interpret engineering drawings and technical documentation. Ensure all work complies with relevant testing standards and quality requirements. Build positive relationships with customers and provide professional technical support. Manage your own workload while working independently both on-site and in the workshop. What We're Looking For We're keen to speak with engineers who have experience servicing, maintaining or repairing engineering equipment. You don't need direct experience with the client's specific products, but you should have a strong engineering background and be confident diagnosing mechanical faults. Essential Skills & Experience Experience servicing, maintaining or calibrating engineering equipment. Strong mechanical fault-finding skills. Good understanding of hydraulic and pneumatic systems. Basic electronics knowledge, including the use of a multimeter and PCB replacement. Ability to read and interpret technical drawings. Good IT skills with experience producing reports and recording calibration data. Full UK driving licence. Valid passport and willingness to travel throughout the UK and internationally. Professional and confident communication skills with the ability to build relationships with customers at all levels. Ability to work independently and manage your own workload. Good level of physical fitness, as some calibration equipment requires manual handling. Desirable Experience Experience in any of the following would be advantageous: Force measurement or test equipment. Calibration or instrumentation. Load cells, LVDTs or electronic transducers. Testing or laboratory equipment. Engineering standards and compliance requirements. Previous field service experience. Suitable Backgrounds This role would suit candidates with experience as a: Field Service Engineer Calibration Engineer Calibration Technician Service Engineer Instrumentation Engineer Test & Measurement Engineer Mechanical Maintenance Engineer Multi-skilled Maintenance Engineer Electronics Technician Hydraulic Engineer Ex-Forces Engineer (REME, RAF or Royal Navy) What's on Offer? £35,000-£40,000 salary , with flexibility for the right experience. Monday to Friday working pattern. Company vehicle provided for all customer visits. A varied role combining workshop-based work with field service. Opportunity to work with specialist force measurement and calibration equipment. UK and international travel. Interested? To find out more or apply, contact:
Mobile HGV/PSV Diagnostic Technician _Emissions & Auto-Electrical Systems_ Location: Swindon-based, with nationwide travel Salary: £40,000-£50,000 Basic + Overtime Job type: Permanent, full-time Schedule: Monday to Friday, day shifts Benefits: Company van, fuel card, specialist training and development About the Role This is far more than a traditional field service role. As a Mobile Commercial Vehicle Diagnostic Technician, you'll be based from our specialist workshop in Swindon, dividing your time between supporting our workshop team and working at customer depots across the UK. You'll help some of the country's leading bus, coach and HGV operators solve complex technical problems that directly impact fleet reliability and vehicle availability. Working on modern Euro 5 and Euro 6 commercial vehicles, you'll diagnose faults involving emissions systems, vehicle electronics and engine management using advanced diagnostics, electrical testing and live vehicle data. Your role is to understand how complex vehicle systems interact, identify the true root cause of faults and deliver practical engineering solutions, rather than simply replacing components based on fault codes. Your work will include DPF, DOC, SCR and SCRT systems, AdBlue dosing equipment, electrical control units, sensors, wiring, CAN communication networks and associated vehicle systems. You'll also support technical investigations and component refurbishment within our Swindon workshop, helping to strengthen the specialist expertise that underpins everything we do. No two days are the same. One day you could be diagnosing an intermittent electrical fault at a customer depot; the next, investigating a failed emissions component in the workshop or working alongside a fleet engineering manager to resolve a challenging technical issue. If you're naturally curious, enjoy solving problems that others can't and want to build specialist expertise in one of the fastest evolving areas of commercial vehicle engineering, you'll find this role both challenging and rewarding. About Intechnic Intechnic is a specialist commercial vehicle emissions engineering company supporting many of the UK's leading bus, coach and HGV operators. From our workshop in Swindon and through our nationwide field engineering team, we deliver advanced diagnostics, emissions system repairs, component refurbishment and technical support that help customers reduce downtime, extend component life and improve fleet reliability. What sets us apart is our engineering approach. We don't believe in replacing parts until a fault disappears. We believe in understanding how modern vehicle systems work together, identifying the real cause of a problem and delivering the right solution first time. We're continually investing in specialist knowledge, diagnostic capability and emerging technologies because modern commercial vehicles demand engineers who never stop learning. Our engineers are trusted to think independently, share knowledge and take ownership of the work they do. If you're looking for more than routine servicing and want to become part of a business where technical ability, curiosity and professional pride are genuinely valued, Intechnic offers the opportunity to build specialist expertise while supporting some of the UK's largest commercial vehicle fleets. Key Responsibilities Carry out mobile diagnostics and repairs at bus depots and other commercial fleet locations. Diagnose mechanical, electrical and emissions-related faults on buses, coaches and HGVs. Investigate Vehicle and exhaust-aftertreatment problems. Diagnose faults involving sensors, wiring, connectors, dosing systems and control units. Use professional diagnostic equipment, electrical testing tools, live data and wiring diagrams. Identify the root cause of faults rather than relying only on fault codes or replacing components unnecessarily. Remove, inspect, repair and replace emissions and exhaust-system components where required. Work closely with customer engineering teams to return vehicles to service safely and efficiently. Complete accurate job sheets, inspection reports and supporting photographs. Explain technical findings and recommendations clearly to customers. Maintain the company van, tools and diagnostic equipment in good working condition. Follow all company and customer health and safety procedures. Represent Intechnic professionally and deliver a high standard of customer service. Skills and Experience Required Proven experience as an HGV Technician, PSV Technician, Bus Technician, Commercial Vehicle Technician or Diagnostic Technician. Strong understanding of commercial-vehicle electrical and electronic systems. Excellent diagnostic, fault-finding and problem-solving skills. Ability to interpret wiring diagrams, diagnostic information and live vehicle data. Confidence investigating complex faults involving several connected vehicle systems. Experience using diagnostic and electrical testing equipment. A methodical and accurate approach to technical work. Ability to work independently and manage a mobile workload effectively. Good communication and customer-service skills. High standards of workmanship and attention to detail. Full UK, clean driving licence. Willingness to travel regularly to customer depots across the UK. Desirable Experience NVQ Level 3 in Heavy Vehicle Maintenance and Repair, or an equivalent qualification. Previous experience working on buses, coaches or commercial fleet vehicles. Knowledge of Euro 5 and Euro 6 emissions-control systems. Experience diagnosing DPF, DOC, SCR, SCRT and AdBlue faults. Experience with multi-brand commercial-vehicle diagnostic equipment. Familiarity with CAN communication and vehicle network faults. Direct emissions-system experience would be highly beneficial. However, we also welcome applications from highly skilled HGV or PSV technicians with excellent electrical and diagnostic ability who are interested in developing specialist emissions expertise. The Right Person We are looking for someone who: Takes pride in completing work correctly and to a high standard. Enjoys solving difficult technical problems. Looks beyond fault codes to understand the real cause of a failure. Can work independently while remaining part of a supportive technical team. Takes ownership of each job from diagnosis through to completion. Communicates professionally with customers and colleagues. Understands the importance of reducing vehicle downtime. Values quality workmanship and excellent customer service. Why Join Intechnic Competitive salary, with overtime opportunities. Company van, fuel card, specialist tools and diagnostic equipment. Monday to Friday working, with no routine weekend work. Ongoing specialist training in advanced commercial vehicle diagnostics, emissions systems and emerging technologies. The opportunity to develop expertise that is increasingly in demand across the commercial vehicle industry. Varied work across some of the UK's largest bus, coach and HGV fleets, with no two days the same. The opportunity to solve complex engineering problems rather than carrying out repetitive servicing and routine maintenance. Support from an experienced workshop and technical team who work together to find the right solution. Genuine opportunities to influence how technical challenges are approached, with your knowledge and ideas valued. A company that invests in developing its engineers and recognises technical ability, initiative and professional pride. Stable, long-term employment within a growing specialist engineering business. Why Technicians Enjoy Working Here At Intechnic, you'll be trusted to do what you do best: diagnose problems properly, think independently and deliver engineering solutions that make a real difference to our customers. We're not interested in replacing parts until the fault disappears. We believe in understanding the problem, identifying the root cause and fixing it properly. That approach creates a more interesting role, develops stronger engineers and delivers better outcomes for our customers. If you're naturally curious, enjoy learning, and take pride in solving the faults that others struggle to diagnose, you'll find a team that shares that mindset. Job Type: Contract Pay: £40,000.00-£50,000.00 per year Work Location: On the road
Aug 03, 2026
Full time
Mobile HGV/PSV Diagnostic Technician _Emissions & Auto-Electrical Systems_ Location: Swindon-based, with nationwide travel Salary: £40,000-£50,000 Basic + Overtime Job type: Permanent, full-time Schedule: Monday to Friday, day shifts Benefits: Company van, fuel card, specialist training and development About the Role This is far more than a traditional field service role. As a Mobile Commercial Vehicle Diagnostic Technician, you'll be based from our specialist workshop in Swindon, dividing your time between supporting our workshop team and working at customer depots across the UK. You'll help some of the country's leading bus, coach and HGV operators solve complex technical problems that directly impact fleet reliability and vehicle availability. Working on modern Euro 5 and Euro 6 commercial vehicles, you'll diagnose faults involving emissions systems, vehicle electronics and engine management using advanced diagnostics, electrical testing and live vehicle data. Your role is to understand how complex vehicle systems interact, identify the true root cause of faults and deliver practical engineering solutions, rather than simply replacing components based on fault codes. Your work will include DPF, DOC, SCR and SCRT systems, AdBlue dosing equipment, electrical control units, sensors, wiring, CAN communication networks and associated vehicle systems. You'll also support technical investigations and component refurbishment within our Swindon workshop, helping to strengthen the specialist expertise that underpins everything we do. No two days are the same. One day you could be diagnosing an intermittent electrical fault at a customer depot; the next, investigating a failed emissions component in the workshop or working alongside a fleet engineering manager to resolve a challenging technical issue. If you're naturally curious, enjoy solving problems that others can't and want to build specialist expertise in one of the fastest evolving areas of commercial vehicle engineering, you'll find this role both challenging and rewarding. About Intechnic Intechnic is a specialist commercial vehicle emissions engineering company supporting many of the UK's leading bus, coach and HGV operators. From our workshop in Swindon and through our nationwide field engineering team, we deliver advanced diagnostics, emissions system repairs, component refurbishment and technical support that help customers reduce downtime, extend component life and improve fleet reliability. What sets us apart is our engineering approach. We don't believe in replacing parts until a fault disappears. We believe in understanding how modern vehicle systems work together, identifying the real cause of a problem and delivering the right solution first time. We're continually investing in specialist knowledge, diagnostic capability and emerging technologies because modern commercial vehicles demand engineers who never stop learning. Our engineers are trusted to think independently, share knowledge and take ownership of the work they do. If you're looking for more than routine servicing and want to become part of a business where technical ability, curiosity and professional pride are genuinely valued, Intechnic offers the opportunity to build specialist expertise while supporting some of the UK's largest commercial vehicle fleets. Key Responsibilities Carry out mobile diagnostics and repairs at bus depots and other commercial fleet locations. Diagnose mechanical, electrical and emissions-related faults on buses, coaches and HGVs. Investigate Vehicle and exhaust-aftertreatment problems. Diagnose faults involving sensors, wiring, connectors, dosing systems and control units. Use professional diagnostic equipment, electrical testing tools, live data and wiring diagrams. Identify the root cause of faults rather than relying only on fault codes or replacing components unnecessarily. Remove, inspect, repair and replace emissions and exhaust-system components where required. Work closely with customer engineering teams to return vehicles to service safely and efficiently. Complete accurate job sheets, inspection reports and supporting photographs. Explain technical findings and recommendations clearly to customers. Maintain the company van, tools and diagnostic equipment in good working condition. Follow all company and customer health and safety procedures. Represent Intechnic professionally and deliver a high standard of customer service. Skills and Experience Required Proven experience as an HGV Technician, PSV Technician, Bus Technician, Commercial Vehicle Technician or Diagnostic Technician. Strong understanding of commercial-vehicle electrical and electronic systems. Excellent diagnostic, fault-finding and problem-solving skills. Ability to interpret wiring diagrams, diagnostic information and live vehicle data. Confidence investigating complex faults involving several connected vehicle systems. Experience using diagnostic and electrical testing equipment. A methodical and accurate approach to technical work. Ability to work independently and manage a mobile workload effectively. Good communication and customer-service skills. High standards of workmanship and attention to detail. Full UK, clean driving licence. Willingness to travel regularly to customer depots across the UK. Desirable Experience NVQ Level 3 in Heavy Vehicle Maintenance and Repair, or an equivalent qualification. Previous experience working on buses, coaches or commercial fleet vehicles. Knowledge of Euro 5 and Euro 6 emissions-control systems. Experience diagnosing DPF, DOC, SCR, SCRT and AdBlue faults. Experience with multi-brand commercial-vehicle diagnostic equipment. Familiarity with CAN communication and vehicle network faults. Direct emissions-system experience would be highly beneficial. However, we also welcome applications from highly skilled HGV or PSV technicians with excellent electrical and diagnostic ability who are interested in developing specialist emissions expertise. The Right Person We are looking for someone who: Takes pride in completing work correctly and to a high standard. Enjoys solving difficult technical problems. Looks beyond fault codes to understand the real cause of a failure. Can work independently while remaining part of a supportive technical team. Takes ownership of each job from diagnosis through to completion. Communicates professionally with customers and colleagues. Understands the importance of reducing vehicle downtime. Values quality workmanship and excellent customer service. Why Join Intechnic Competitive salary, with overtime opportunities. Company van, fuel card, specialist tools and diagnostic equipment. Monday to Friday working, with no routine weekend work. Ongoing specialist training in advanced commercial vehicle diagnostics, emissions systems and emerging technologies. The opportunity to develop expertise that is increasingly in demand across the commercial vehicle industry. Varied work across some of the UK's largest bus, coach and HGV fleets, with no two days the same. The opportunity to solve complex engineering problems rather than carrying out repetitive servicing and routine maintenance. Support from an experienced workshop and technical team who work together to find the right solution. Genuine opportunities to influence how technical challenges are approached, with your knowledge and ideas valued. A company that invests in developing its engineers and recognises technical ability, initiative and professional pride. Stable, long-term employment within a growing specialist engineering business. Why Technicians Enjoy Working Here At Intechnic, you'll be trusted to do what you do best: diagnose problems properly, think independently and deliver engineering solutions that make a real difference to our customers. We're not interested in replacing parts until the fault disappears. We believe in understanding the problem, identifying the root cause and fixing it properly. That approach creates a more interesting role, develops stronger engineers and delivers better outcomes for our customers. If you're naturally curious, enjoy learning, and take pride in solving the faults that others struggle to diagnose, you'll find a team that shares that mindset. Job Type: Contract Pay: £40,000.00-£50,000.00 per year Work Location: On the road
Breedon Group plc is a premier, vertically-integrated construction materials group in Great Britain, Ireland, and the USA. We are committed to innovation, sustainability, and providing high-quality materials for the construction industry. Our commitment to safety, environmental stewardship, and excellence sets us apart as a leader in our field. Position Overview: We are excited to offer an opportunity for a skilled Maintenance Engineer to join our team at Raisby Quarry. In this role, you will engage in problem-solving and collaborate with our maintenance team to diagnose and resolve mechanical defects and breakdowns efficiently and safely. Your focus will be on identifying root causes of equipment issues, implementing solutions, and supporting the development and execution of preventative maintenance activities to ensure the reliability and safety of our plant operations. Key Responsibilities Diagnose mechanical defects and perform breakdown repairs. Contribute to identifying and implementing preventative maintenance strategies. Work closely with the Maintenance Team Leader to enhance plant reliability and safety. Engage in the planning and execution of plant improvements and maintenance activities. Collaborate with team members and contractors to ensure effective maintenance support. Experience in an industrial maintenance role. Skills, Knowledge & Expertise Proficient in hydraulics, concrete pan mixers, welding, fabrication, and mechanics. NVQ in Mechanical Maintenance, BTEC equivalent, or higher. Full UK driving licence. NVQ Level 3 or 4 in Health and Safety and/or NEBOSH qualification (advantageous). Job Benefits Competitive salary tailored to your experience. Pension scheme. 25 days annual leave plus bank holidays. Share Saver Scheme. Life Assurance. Access to our employee benefits platform for discounts across a wide range of brands. Opportunities for professional development and career progression. Our Commitment: At Breedon, we pride ourselves on our health, safety, and environmental consciousness. We strive to exceed standards to mitigate environmental impact and ensure the safety and wellbeing of our colleagues and stakeholders. Joining Breedon means: Being part of a value-led organisation that respects and values your contribution. We are dedicated to building an inclusive environment where you can be yourself, feel valued, respected, and supported to deliver your best work. Ready to Apply? If you're ready to take on this challenging and rewarding role, please click to apply, we are eager to hear from you! Apply Now to start your journey with Breedon Group, where your work makes a tangible difference every day.
Aug 03, 2026
Full time
Breedon Group plc is a premier, vertically-integrated construction materials group in Great Britain, Ireland, and the USA. We are committed to innovation, sustainability, and providing high-quality materials for the construction industry. Our commitment to safety, environmental stewardship, and excellence sets us apart as a leader in our field. Position Overview: We are excited to offer an opportunity for a skilled Maintenance Engineer to join our team at Raisby Quarry. In this role, you will engage in problem-solving and collaborate with our maintenance team to diagnose and resolve mechanical defects and breakdowns efficiently and safely. Your focus will be on identifying root causes of equipment issues, implementing solutions, and supporting the development and execution of preventative maintenance activities to ensure the reliability and safety of our plant operations. Key Responsibilities Diagnose mechanical defects and perform breakdown repairs. Contribute to identifying and implementing preventative maintenance strategies. Work closely with the Maintenance Team Leader to enhance plant reliability and safety. Engage in the planning and execution of plant improvements and maintenance activities. Collaborate with team members and contractors to ensure effective maintenance support. Experience in an industrial maintenance role. Skills, Knowledge & Expertise Proficient in hydraulics, concrete pan mixers, welding, fabrication, and mechanics. NVQ in Mechanical Maintenance, BTEC equivalent, or higher. Full UK driving licence. NVQ Level 3 or 4 in Health and Safety and/or NEBOSH qualification (advantageous). Job Benefits Competitive salary tailored to your experience. Pension scheme. 25 days annual leave plus bank holidays. Share Saver Scheme. Life Assurance. Access to our employee benefits platform for discounts across a wide range of brands. Opportunities for professional development and career progression. Our Commitment: At Breedon, we pride ourselves on our health, safety, and environmental consciousness. We strive to exceed standards to mitigate environmental impact and ensure the safety and wellbeing of our colleagues and stakeholders. Joining Breedon means: Being part of a value-led organisation that respects and values your contribution. We are dedicated to building an inclusive environment where you can be yourself, feel valued, respected, and supported to deliver your best work. Ready to Apply? If you're ready to take on this challenging and rewarding role, please click to apply, we are eager to hear from you! Apply Now to start your journey with Breedon Group, where your work makes a tangible difference every day.
Mechanical Maintenance Engineer (service and repair) 52 - 55k per annum & overtime, vehicle/ fuel card & package My client is seeking a skilled and reliable Heating Engineer to join our dedicated team at Hammersmith, St Mary's & Charing Cross Hospitals. The ideal engineer will have experience in maintaining, repairing, and installing Low Temperature Hot Water, Medium Temperature Hot Water & Steam Systems. Qualifications & Experience: Proven experience as a heating engineer, preferably in a healthcare & commercial setting. Commercial plant room experience. Strong knowledge of various heating/ hot water systems and controls. Relevant certifications (NVQ Level 2/3, or equivalent). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Removing bundles from calorifiers to allow inspection/ de-scaling. Upgrading system components; gauges, safety valves etc. Replacement of key system components on various system; Pumps, motorised valves, modulators, slam shuts, plate packs. Re-pipe works when system fails. Re-pipe works during project works. Various system upgrades due to the age of the systems. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal performance. Respond quickly to heating-related emergencies or system failures. Maintain accurate records of maintenance and repairs via job reporting & good communication with their supervisor/ manager. Work closely with other staff when upgrades are taking place within Hospital wards. Feed all site/ system recommendations back to their line manager. Open to be working at multiple sites in 1 day. Jobs can be very Ad-hoc on these premises due to the age of the building, emergencies can come in at any time. Ability to work with Steel, Galvanised steel, stainless steel, copper & ABS, utilising crimped systems. If you meet the criteria then please contact Russ Cleverley in CONFIDENCE.
Aug 03, 2026
Full time
Mechanical Maintenance Engineer (service and repair) 52 - 55k per annum & overtime, vehicle/ fuel card & package My client is seeking a skilled and reliable Heating Engineer to join our dedicated team at Hammersmith, St Mary's & Charing Cross Hospitals. The ideal engineer will have experience in maintaining, repairing, and installing Low Temperature Hot Water, Medium Temperature Hot Water & Steam Systems. Qualifications & Experience: Proven experience as a heating engineer, preferably in a healthcare & commercial setting. Commercial plant room experience. Strong knowledge of various heating/ hot water systems and controls. Relevant certifications (NVQ Level 2/3, or equivalent). Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a team. Various Tasks to be carried out; Monthly PPM and reactive visits relating to plant; Heating & Hot water Calorifiers, Plate Heat Exchangers. Removing bundles from calorifiers to allow inspection/ de-scaling. Upgrading system components; gauges, safety valves etc. Replacement of key system components on various system; Pumps, motorised valves, modulators, slam shuts, plate packs. Re-pipe works when system fails. Re-pipe works during project works. Various system upgrades due to the age of the systems. Key Responsibilities: Conduct regular inspections and servicing of all heating systems to ensure optimal performance. Respond quickly to heating-related emergencies or system failures. Maintain accurate records of maintenance and repairs via job reporting & good communication with their supervisor/ manager. Work closely with other staff when upgrades are taking place within Hospital wards. Feed all site/ system recommendations back to their line manager. Open to be working at multiple sites in 1 day. Jobs can be very Ad-hoc on these premises due to the age of the building, emergencies can come in at any time. Ability to work with Steel, Galvanised steel, stainless steel, copper & ABS, utilising crimped systems. If you meet the criteria then please contact Russ Cleverley in CONFIDENCE.
Air Conditioning Engineer (Installation Bias) Location Buckinghamshire and surrounding areas including Berkshire & Oxfordshire The Company Established for over 40 years, our client is a well-respected and long-standing M&E specialist contractor. With a workforce of over 50 employees, they provide a full range of Mechanical & Electrical services. The business operates exclusively within the local region, covering Buckinghamshire, Berkshire & Oxfordshire, allowing engineers to maintain an excellent work-life balance without extensive travel into London. Their client portfolio consists entirely of commercial properties across local authorities, office buildings, telecoms and NHS sites. The company has an excellent reputation for staff retention and offers stable long-term employment with a supportive management team. The Role Due to continued growth, they are looking to recruit an Air Conditioning Engineer with a strong installation background who is also comfortable carrying out service, maintenance and fault-finding duties when required. This is a varied role offering a healthy split of installation and maintenance work across commercial environments. Equipment Worked On: VRV Systems VRF Systems Split Systems Multi-Split Systems Air Handling Units (AHUs) Key Responsibilities: Installation of commercial air conditioning systems Service and planned preventative maintenance (PPM) Reactive fault finding and diagnosis Compressor replacements System repairs and breakdown attendance Working across a variety of commercial client sites Ensuring all work is completed to a high standard and in line with health & safety requirements Candidate Requirements Proven experience within commercial air conditioning Strong installation background with the ability to support service and maintenance works Experience working on VRV, VRF, Split, Multi-Split and AHU systems Competent fault-finding skills Experience carrying out compressor changes and major repairs Full UK Driving Licence Strong customer-facing communication skills Salary & Benefits Competitive salary dependent on experience (up to the mid £40,000s for strong engineers) Annual salary reviews Company van and fuel card - Private use of van included Call out - 1 in 13. Mobile phone provided Pension scheme PPE and specialist tools supplied Overtime opportunities available Weekend work available on installation projects when required Travel time paid after 30 minutes each way Overtime rates apply to travel time beyond the first 30 minutes each way Bonus schemes throughout the year Working Hours Monday to Friday 8:00am - 4:30pm 30-minute lunch break If you feel you would be well suited for the role or would like to find out more, please send your up to date CV.
Aug 03, 2026
Full time
Air Conditioning Engineer (Installation Bias) Location Buckinghamshire and surrounding areas including Berkshire & Oxfordshire The Company Established for over 40 years, our client is a well-respected and long-standing M&E specialist contractor. With a workforce of over 50 employees, they provide a full range of Mechanical & Electrical services. The business operates exclusively within the local region, covering Buckinghamshire, Berkshire & Oxfordshire, allowing engineers to maintain an excellent work-life balance without extensive travel into London. Their client portfolio consists entirely of commercial properties across local authorities, office buildings, telecoms and NHS sites. The company has an excellent reputation for staff retention and offers stable long-term employment with a supportive management team. The Role Due to continued growth, they are looking to recruit an Air Conditioning Engineer with a strong installation background who is also comfortable carrying out service, maintenance and fault-finding duties when required. This is a varied role offering a healthy split of installation and maintenance work across commercial environments. Equipment Worked On: VRV Systems VRF Systems Split Systems Multi-Split Systems Air Handling Units (AHUs) Key Responsibilities: Installation of commercial air conditioning systems Service and planned preventative maintenance (PPM) Reactive fault finding and diagnosis Compressor replacements System repairs and breakdown attendance Working across a variety of commercial client sites Ensuring all work is completed to a high standard and in line with health & safety requirements Candidate Requirements Proven experience within commercial air conditioning Strong installation background with the ability to support service and maintenance works Experience working on VRV, VRF, Split, Multi-Split and AHU systems Competent fault-finding skills Experience carrying out compressor changes and major repairs Full UK Driving Licence Strong customer-facing communication skills Salary & Benefits Competitive salary dependent on experience (up to the mid £40,000s for strong engineers) Annual salary reviews Company van and fuel card - Private use of van included Call out - 1 in 13. Mobile phone provided Pension scheme PPE and specialist tools supplied Overtime opportunities available Weekend work available on installation projects when required Travel time paid after 30 minutes each way Overtime rates apply to travel time beyond the first 30 minutes each way Bonus schemes throughout the year Working Hours Monday to Friday 8:00am - 4:30pm 30-minute lunch break If you feel you would be well suited for the role or would like to find out more, please send your up to date CV.
Ernest Gordon Recruitment Limited
Cumnock, Ayrshire
Workshop Engineer (Hydraulics / 4 day week) £18p/hr - £19p/hr + Progression + 4 day work week + Training + Unlimited Overtime + Company Benefits Cumnock Are you a Workshop Engineer or similar with Hydraulics experience looking for a varied role working on a specialist range of industrial vehicles within a market-leading manufacturer known for looking after and developing their staff offering a 4 day work week and lots of optional overtime to increase your earnings? This company specialise in the manufacturing of Fire and Rescue equipment and appliances such as Fire Engines and have loaded to become supply directly to a number of blue-chip customers across the UK. Since their establishment in 1989, they have become market leaders and are now looking to grow their friendly Workshop team. In this varied role you will be based in the workshop as part of a tight-knit team tasked to carry out fitting, repair and maintenance on a diverse range of hydraulic components for bespoke Industrial vehicles. Further to this you will also carry out a range of assembly, testing and project responsibilities as you work Monday-Thursday 7am-5:15pm, with optional overtime on Tuesday, Thursday and Friday paid at enhanced rates. This role would suit a Workshop Engineer or similar with Hydraulics experience looking for a position within a well respected employer who value their staff and offer a good work life balance and optional overtime to increase earnings. The Role: Fitting and repair of Hydraulic systems for Industrial vehicles Assembly and testing of components Monday-Thursday role 7am-5:15pm Work within tight-knit team and liaise with other departments Optional overtime available on Tuesday, Thursday and Friday (first 4 hours paid 1.5x, after this 2x) The Person: Workshop Engineer or similar Hydraulics experience Looking for a 4 day work week Commutable to Cumnock Workshop, Hydraulic, Technician, Fitter, Engineering, Mechanical, Operative, Manufacturing, Industrial, Automotive, Days-based, Overtime, 4 days, Scotland, Central Belt Cumnock, Ayr, Kilmarnock Reference: BBBH25813 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Aug 03, 2026
Full time
Workshop Engineer (Hydraulics / 4 day week) £18p/hr - £19p/hr + Progression + 4 day work week + Training + Unlimited Overtime + Company Benefits Cumnock Are you a Workshop Engineer or similar with Hydraulics experience looking for a varied role working on a specialist range of industrial vehicles within a market-leading manufacturer known for looking after and developing their staff offering a 4 day work week and lots of optional overtime to increase your earnings? This company specialise in the manufacturing of Fire and Rescue equipment and appliances such as Fire Engines and have loaded to become supply directly to a number of blue-chip customers across the UK. Since their establishment in 1989, they have become market leaders and are now looking to grow their friendly Workshop team. In this varied role you will be based in the workshop as part of a tight-knit team tasked to carry out fitting, repair and maintenance on a diverse range of hydraulic components for bespoke Industrial vehicles. Further to this you will also carry out a range of assembly, testing and project responsibilities as you work Monday-Thursday 7am-5:15pm, with optional overtime on Tuesday, Thursday and Friday paid at enhanced rates. This role would suit a Workshop Engineer or similar with Hydraulics experience looking for a position within a well respected employer who value their staff and offer a good work life balance and optional overtime to increase earnings. The Role: Fitting and repair of Hydraulic systems for Industrial vehicles Assembly and testing of components Monday-Thursday role 7am-5:15pm Work within tight-knit team and liaise with other departments Optional overtime available on Tuesday, Thursday and Friday (first 4 hours paid 1.5x, after this 2x) The Person: Workshop Engineer or similar Hydraulics experience Looking for a 4 day work week Commutable to Cumnock Workshop, Hydraulic, Technician, Fitter, Engineering, Mechanical, Operative, Manufacturing, Industrial, Automotive, Days-based, Overtime, 4 days, Scotland, Central Belt Cumnock, Ayr, Kilmarnock Reference: BBBH25813 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
82803- EHV Fitter Join UK Power Networks as an EHV Fitter and play a vital role in maintaining and improving London's electricity network. Working from our Stratford office, you'll be part of a skilled team responsible for the maintenance, fault diagnosis and repair of electrical plant and switchgear up to 132kV, helping to keep power flowing safely and reliably to millions of customers! We're looking for someone with an understanding of primary plant and switchgear who are passionate about safety, teamwork and delivering high-quality work. Mechanical experience is beneficial as well! In return, you'll receive a competitive salary of 45,858, Inner London Allowance, excellent benefits, pension contributions up to 10%, annual bonus, and the opportunity to develop your career with one of the UK's leading electricity distribution network operators
Aug 03, 2026
Full time
82803- EHV Fitter Join UK Power Networks as an EHV Fitter and play a vital role in maintaining and improving London's electricity network. Working from our Stratford office, you'll be part of a skilled team responsible for the maintenance, fault diagnosis and repair of electrical plant and switchgear up to 132kV, helping to keep power flowing safely and reliably to millions of customers! We're looking for someone with an understanding of primary plant and switchgear who are passionate about safety, teamwork and delivering high-quality work. Mechanical experience is beneficial as well! In return, you'll receive a competitive salary of 45,858, Inner London Allowance, excellent benefits, pension contributions up to 10%, annual bonus, and the opportunity to develop your career with one of the UK's leading electricity distribution network operators
We are recruiting on behalf of a well-established engineering company seeking an experienced Hydraulic Fitter to join their growing team. This is an excellent opportunity for a skilled mechanical professional who enjoys working with hydraulic systems, fault finding, assembly, maintenance, and repairs across a range of industrial equipment and machinery. The successful candidate will be responsible for building, installing, servicing, and repairing hydraulic components while ensuring all work is completed safely, efficiently, and to a high standard. Key Responsibilities Assemble, install, and commission hydraulic systems and components. Diagnose hydraulic and mechanical faults using appropriate testing equipment. Repair and replace hydraulic cylinders, pumps, valves, motors, hoses, and associated components. Read and interpret hydraulic schematics, engineering drawings, and technical manuals. Conduct preventative maintenance and planned servicing on hydraulic equipment. Pressure test hydraulic systems to ensure safe and reliable operation. Ensure all work complies with health and safety regulations and company procedures. Complete service reports, maintenance records, and job documentation accurately. Work collaboratively with engineers, technicians, and production teams to minimise downtime. Identify opportunities for process improvements and report recurring equipment issues. Skills & Experience Essential Previous experience working as a Hydraulic Fitter, Mechanical Fitter, Plant Fitter, or similar role. Strong understanding of hydraulic systems and components. Ability to interpret hydraulic circuit diagrams and engineering drawings. Experience with hydraulic fault diagnosis and repair. Competent in the use of hand tools, power tools, and workshop equipment. Strong mechanical aptitude and problem-solving skills. Ability to work independently and as part of a team. Full UK driving licence (if field-based).
Aug 03, 2026
Full time
We are recruiting on behalf of a well-established engineering company seeking an experienced Hydraulic Fitter to join their growing team. This is an excellent opportunity for a skilled mechanical professional who enjoys working with hydraulic systems, fault finding, assembly, maintenance, and repairs across a range of industrial equipment and machinery. The successful candidate will be responsible for building, installing, servicing, and repairing hydraulic components while ensuring all work is completed safely, efficiently, and to a high standard. Key Responsibilities Assemble, install, and commission hydraulic systems and components. Diagnose hydraulic and mechanical faults using appropriate testing equipment. Repair and replace hydraulic cylinders, pumps, valves, motors, hoses, and associated components. Read and interpret hydraulic schematics, engineering drawings, and technical manuals. Conduct preventative maintenance and planned servicing on hydraulic equipment. Pressure test hydraulic systems to ensure safe and reliable operation. Ensure all work complies with health and safety regulations and company procedures. Complete service reports, maintenance records, and job documentation accurately. Work collaboratively with engineers, technicians, and production teams to minimise downtime. Identify opportunities for process improvements and report recurring equipment issues. Skills & Experience Essential Previous experience working as a Hydraulic Fitter, Mechanical Fitter, Plant Fitter, or similar role. Strong understanding of hydraulic systems and components. Ability to interpret hydraulic circuit diagrams and engineering drawings. Experience with hydraulic fault diagnosis and repair. Competent in the use of hand tools, power tools, and workshop equipment. Strong mechanical aptitude and problem-solving skills. Ability to work independently and as part of a team. Full UK driving licence (if field-based).
Our client is one of the largest facilities management and maintenance contractors in the UK, offering market leading opportunities for talented professionals looking for long term career progression. Due to an increase in upcoming projects, there is now a need for a Maintenance Supervisor to join this highly successful and forward-thinking organisation. We are looking for a Maintenance Supervisor who wants to work in a diverse role where no two days are the same. As the Multi Skilled Electrical Engineer, you will provide the delivery of both planned and reactive FM maintenance services. The Maintenance Supervisor, will be responsible for: Lead and support a team of 8 engineers across 3 sites, ensuring effective delivery of planned and reactive maintenance Carry out hands-on mechanical, electrical, or multi-skilled maintenance tasks Allocate work, provide technical guidance, and support team development Ensure compliance with health & safety and statutory requirements Build strong working relationships with client stakeholders To be successful for this Maintenance Supervisor role you must have: Relevant qualification (City & Guilds / NVQ Level 3 or equivalent in mechanical or electrical discipline) Proven experience in a maintenance supervisory or lead role Strong understanding of building services and compliance requirements A proactive, hands-on approach with the ability to balance supervision and technical work Experience working across multiple sites or in a similar environment Strong communication and organisational skills A focus on safety, quality, and service delivery A candidate willing to undergo a SC Clearance check to work on this contract If you feel you have the necessary skills set and experience to perform this Maintenance Supervisor role , and you are interested in an opportunity offering unparalleled career development, please apply now.
Aug 03, 2026
Full time
Our client is one of the largest facilities management and maintenance contractors in the UK, offering market leading opportunities for talented professionals looking for long term career progression. Due to an increase in upcoming projects, there is now a need for a Maintenance Supervisor to join this highly successful and forward-thinking organisation. We are looking for a Maintenance Supervisor who wants to work in a diverse role where no two days are the same. As the Multi Skilled Electrical Engineer, you will provide the delivery of both planned and reactive FM maintenance services. The Maintenance Supervisor, will be responsible for: Lead and support a team of 8 engineers across 3 sites, ensuring effective delivery of planned and reactive maintenance Carry out hands-on mechanical, electrical, or multi-skilled maintenance tasks Allocate work, provide technical guidance, and support team development Ensure compliance with health & safety and statutory requirements Build strong working relationships with client stakeholders To be successful for this Maintenance Supervisor role you must have: Relevant qualification (City & Guilds / NVQ Level 3 or equivalent in mechanical or electrical discipline) Proven experience in a maintenance supervisory or lead role Strong understanding of building services and compliance requirements A proactive, hands-on approach with the ability to balance supervision and technical work Experience working across multiple sites or in a similar environment Strong communication and organisational skills A focus on safety, quality, and service delivery A candidate willing to undergo a SC Clearance check to work on this contract If you feel you have the necessary skills set and experience to perform this Maintenance Supervisor role , and you are interested in an opportunity offering unparalleled career development, please apply now.
Hexagon Group is delighted to be partnering with a leading real estate investment company to recruit a Technical Services Manager, responsible for overseeing the technical operations across a prestigious portfolio of commercial buildings in Central London. This is an exciting opportunity to join a highly respected organisation with an outstanding reputation for investing in both its people and its property portfolio. The salary on offer is 70,000 - 75,000, depending on experience, alongside an outstanding benefits package. As Technical Services Manager, you will work closely with the wider building management teams to ensure the portfolio is maintained to the highest possible standard. With a strong focus on delivering best-in-class technical services, you will play a key role in protecting and enhancing the performance of these high-profile assets while ensuring an exceptional experience for occupiers. You will be responsible for managing specialist hard services contractors across the portfolio, monitoring performance against agreed service levels and ensuring consistently high standards are achieved. The role will see you supporting energy management and sustainability initiatives, analysing building performance and implementing innovative solutions that improve efficiency while supporting the organisation's wider environmental objectives. You will also work closely with occupiers, consultants and internal stakeholders, providing technical expertise, resolving building-related queries, supporting long-term asset management strategies, and overseeing the planned preventative maintenance programme. A proactive approach is essential, with responsibility for managing reactive maintenance issues, coordinating contractors to deliver timely resolutions, and ensuring minimal disruption to occupiers. You will support the preparation and management of service charge budgets alongside the property management team, monitor health and safety performance across the portfolio, and ensure full statutory compliance is maintained at all times. In addition, you will oversee technical projects, liaise with consultants and contractors throughout delivery, and provide technical support to the wider property team when required. The successful candidate will possess a strong mechanical and electrical background, ideally supported by an HNC, HND, Degree or Master's qualification in Building Services, Mechanical or Electrical Engineering. You will have proven experience managing technical services across multi-tenanted commercial buildings, with a comprehensive understanding of hard services FM, statutory compliance and building engineering. You will be a confident communicator, capable of building strong relationships with occupiers, consultants, contractors and internal stakeholders alike. Our client is looking to commence interviews as soon as possible, so if this opportunity is of interest, please don't hesitate to apply with a copy of your CV.
Aug 03, 2026
Full time
Hexagon Group is delighted to be partnering with a leading real estate investment company to recruit a Technical Services Manager, responsible for overseeing the technical operations across a prestigious portfolio of commercial buildings in Central London. This is an exciting opportunity to join a highly respected organisation with an outstanding reputation for investing in both its people and its property portfolio. The salary on offer is 70,000 - 75,000, depending on experience, alongside an outstanding benefits package. As Technical Services Manager, you will work closely with the wider building management teams to ensure the portfolio is maintained to the highest possible standard. With a strong focus on delivering best-in-class technical services, you will play a key role in protecting and enhancing the performance of these high-profile assets while ensuring an exceptional experience for occupiers. You will be responsible for managing specialist hard services contractors across the portfolio, monitoring performance against agreed service levels and ensuring consistently high standards are achieved. The role will see you supporting energy management and sustainability initiatives, analysing building performance and implementing innovative solutions that improve efficiency while supporting the organisation's wider environmental objectives. You will also work closely with occupiers, consultants and internal stakeholders, providing technical expertise, resolving building-related queries, supporting long-term asset management strategies, and overseeing the planned preventative maintenance programme. A proactive approach is essential, with responsibility for managing reactive maintenance issues, coordinating contractors to deliver timely resolutions, and ensuring minimal disruption to occupiers. You will support the preparation and management of service charge budgets alongside the property management team, monitor health and safety performance across the portfolio, and ensure full statutory compliance is maintained at all times. In addition, you will oversee technical projects, liaise with consultants and contractors throughout delivery, and provide technical support to the wider property team when required. The successful candidate will possess a strong mechanical and electrical background, ideally supported by an HNC, HND, Degree or Master's qualification in Building Services, Mechanical or Electrical Engineering. You will have proven experience managing technical services across multi-tenanted commercial buildings, with a comprehensive understanding of hard services FM, statutory compliance and building engineering. You will be a confident communicator, capable of building strong relationships with occupiers, consultants, contractors and internal stakeholders alike. Our client is looking to commence interviews as soon as possible, so if this opportunity is of interest, please don't hesitate to apply with a copy of your CV.
