69 jobs found

Aircraft Mechanical Supervisor (Hawk Programme) Location: RAF Valley, Isle of Anglesey Position: Permanent Salary: £36,304.44 per annum Reference: SF71695 Overview Morson Edge is supporting the recruitment of an Aircraft Mechanical Supervisor to join a military aviation team supporting Hawk aircraft depth maintenance at RAF Valley. This is an excellent opportunity for an experienced aircraft engineer or supervisor looking to combine hands-on engineering with leadership responsibility within a highly respected defence aviation programme. Working within a structured maintenance environment, you will support aircraft availability, technical standards, and team performance while developing your supervisory and leadership capabilities. Why Apply? Permanent position supporting Hawk aircraft within a military aviation environment Four-day working week with long weekends every week Opportunity to supervise and lead aircraft maintenance activities Support the RAF's fast jet training programme Develop both technical and leadership experience Work within a respected and safety-critical aviation environment Support operational aircraft maintenance at RAF Valley Shift Pattern Monday Wednesday: 07 00 Thursday: 07 30 Enjoy a structured four-day working week, providing a long weekend every week and a strong work-life balance. Key Responsibilities Undertake and supervise aircraft depth maintenance and diagnostic activities Carry out inspections, repairs, modifications, and system testing Analyse and diagnose faults on aircraft systems and components Support maintenance delivery against operational and programme requirements Provide technical leadership and support to maintenance technicians Promote best practice and a proactive maintenance culture within the team Carry out compliance-related support activities including tooling control and oversight checks Ensure all maintenance activities comply with approved procedures and Maintenance Organisation Exposition (MOE) requirements Maintain high standards of workmanship, safety, and regulatory compliance Essential Skills & Experience Previous hands-on aircraft engineering or mechanical maintenance experience Strong engineering knowledge and fault diagnostic capability Experience working within safety-critical or regulated maintenance environments Ability to lead, influence, and support maintenance personnel Strong communication, organisational, and time management skills Commitment to high standards of safety, quality, and professional conduct Eligible to obtain and maintain BPSS and SC Security Clearance Qualifications Completion of a recognised Engineering Apprenticeship, ideally Aeronautical Engineering or military equivalent City & Guilds 2675 Aeronautical Engineering & Maintenance or NVQ Level 3 in an Aeronautical discipline Aircraft platform training relevant to the fleet Trade Principles training Good IT competency Working Environment Located on the Isle of Anglesey, RAF Valley offers the opportunity to work in a unique coastal setting while supporting one of the UK's most important military aviation programmes. Military aviation and aircraft depth maintenance environment Structured engineering team supporting operational aircraft maintenance activities Strong engineering culture with ongoing development opportunities Excellent opportunity to develop supervisory and technical leadership experience within a highly respected aviation programme Key Information Location: RAF Valley, Isle of Anglesey Contract Type: Permanent Aircraft: Hawk Environment: Military Aviation / Aircraft Depth Maintenance Security Clearance: BPSS and SC eligibility required Ready for Your Next Step? This is a fantastic opportunity for a skilled aviation professional looking to progress into a supervisory role within a dynamic and safety-critical military aviation environment. Whether you're an experienced aircraft engineer ready to step into leadership or an existing supervisor looking for a new challenge within military aviation, we'd be interested in hearing from you. If you are interested, please send a CV to (url removed) or apply directly!

Mechanical Technician Morson Edge is supporting the recruitment of a Mechanical Technician to support aircraft maintenance operations at RAF Valley on the Hawk fast jet. This role will involve carrying out detailed mechanical maintenance activities across aircraft and aircraft components within a fast-paced operational environment, supporting aircraft availability, safety, and operational readiness. The successful candidate will work within a skilled maintenance team, undertaking fault diagnosis, repairs, servicing, and system testing while maintaining compliance with approved technical procedures and regulatory requirements. Key Information • Location: RAF Valley, Isle of Anglesey • Position: Permanent, £31,574.97 • Hours: 37.5 hours per week plus shifts • Additional shift allowance applicable • Environment: Military Aviation / Aircraft Maintenance Key Responsibilities • Complete mechanical maintenance and diagnostic activities on aircraft and components • Undertake scheduled servicing, repairs, rectifications, and system testing • Analyse and diagnose mechanical faults and support effective repairs • Support improvements to maintenance procedures and operational practices • Work in accordance with approved technical information and maintenance instructions • Maintain personal competencies in line with MOE requirements • Support compliance activities including tooling control and documentation checks • Maintain high standards of workmanship, safety, and regulatory compliance • Work effectively within a busy operational maintenance environment Requirements • Experience within an aircraft maintenance or aviation engineering environment • Ability to work to approved maintenance instructions and safety-critical procedures • Strong fault diagnosis and practical mechanical maintenance skills • Strong teamwork and communication skills • Ability to work within a regulated and operationally focused environment Qualifications • Completion of an Engineering Apprenticeship, ideally Aeronautical or military equivalent • City & Guilds 2675 Aeronautical Engineering & Maintenance or NVQ Level 3 Aeronautical discipline • Airframe and Propulsion trade training • Computer literate If you are interested, please send a CV to (url removed) or apply directly!

Vehicle Mechanic Glasgow Airport with full training into working on GSE Equipment at the Airport Salary: £39,000 £41,000 DOE + On-Call Allowance + Overtime Location: Glasgow Airport Job Type: Full-time Permanent Vehicle Mechanic / Vehicle Technician The Opportunity An exciting opportunity has arisen for an experienced Vehicle Mechanic to join a busy and dynamic workshop team based at Glasgow Airport. This hands-on role involves maintaining and repairing a wide range of Ground Support Equipment (GSE), including aircraft tugs, towing tractors, baggage elevators, and other specialist airside vehicles. Full training on airport equipment will be provided. This position is ideal for a qualified HGV, LGV, plant, commercial vehicle, or fleet mechanic looking to develop their skills in a unique and varied engineering environment. Vehicle Mechanic / Vehicle Technician Key Responsibilities Carry out servicing, maintenance, and repairs on Ground Support Equipment and associated vehicles Diagnose mechanical, hydraulic, and electrical faults efficiently Complete inspections, brake testing, and smoke tests while reporting defects accurately Maintain detailed job cards and service documentation Liaise with the Workshop Supervisor regarding repair progress and additional work requirements Ensure correct ordering, booking, and storage of parts Work independently and outdoors in varying weather conditions Participate in the on-call rota (1 week in 4) Vehicle Mechanic / Vehicle Technician Health, Safety & Compliance Follow all Health & Safety procedures and safe working practices Correctly use PPE, tools, and workshop equipment Report hazards, incidents, defects, and near misses promptly Support compliance with ISO 9001, ISO 14001, and OHSAS 18001 standards Adhere to environmental and waste management procedures Vehicle Mechanic / Vehicle Technician About You Essential Skills & Experience Proven experience as a Vehicle Mechanic working on HGV, LGV, commercial vehicles, plant machinery, or fleet vehicles Level 3 qualification in Vehicle Maintenance & Repair (City & Guilds, NVQ or equivalent) Strong diagnostic and fault-finding skills Full UK driving licence Ability to work independently and within a team Good understanding of workshop health & safety procedures Desirable Skills Welding experience Hydraulic and electrical fault-finding knowledge Previous experience working on Ground Support Equipment or specialist vehicles Additional Requirements Right to work in the UK Ability to obtain an airside pass, including: Criminal record check 5-year employment history verification Ability to provide proof of qualifications and certifications Vehicle Mechanic / Vehicle Technician Working Hours Monday to Friday Rotating Shifts: 06 30 (2 weeks) 08 30 (2 weeks) On-Call Rota 1 week in 4 covering weekends £15.75 per hour standby allowance Minimum 4 hours paid at time-and-a-half if called out Vehicle Mechanic / Vehicle Technician Benefits Private medical insurance Free on-site parking Full specialist GSE training provided Stable permanent role within a fast-paced airport operation If you re looking for a varied mechanic role with specialist equipment, excellent training, and long-term career prospects, apply today to join the team at Glasgow Airport. Benefits: Free parking On-site parking

Mechanical Supervisor Location: RAF Valley, Isle of Anglesey Contract Type: Permanent Role ID: SF66156 Hours: 36 hours per week Shift Pattern: Monday Friday, 06 45 Salary & Benefits £34,703.20 per annum + £3,978 shift allowance Permanent opportunity within a highly specialised military aviation environment Overview An exciting opportunity is available for an experienced Mechanical Supervisor to support aircraft maintenance operations at RAF Valley. This is an excellent opportunity for an aviation professional to take on a leadership role within a fast-paced, safety-critical military aviation environment. The successful candidate will supervise aircraft maintenance activities, ensuring high standards of safety, airworthiness, reliability, and operational performance are maintained at all times. The role will involve providing technical leadership, overseeing maintenance delivery, and supporting the ongoing development and competency of the wider engineering team. Key Responsibilities Supervise aircraft maintenance activities within a regulated aviation environment Review operational performance of aircraft systems and components Analyse and diagnose faults across aircraft and associated systems Support repairs, modifications, and maintenance improvements using technical expertise Ensure maintenance schedules and operational targets are achieved Resolve maintenance issues and escalate where required Maintain personal and team competencies for aircraft and component maintenance activities Ensure all work is carried out safely and in accordance with regulatory and company procedures Promote high standards of workmanship, safety, and compliance Demonstrate flexibility and a proactive approach to operational requirements Essential Skills & Experience Previous supervisory or leadership experience within an aircraft maintenance environment Fully qualified technician with relevant maintenance authorities and certifications Strong aircraft maintenance and fault diagnostic capability Broad aviation maintenance experience supported by current and recent logbook evidence Strong understanding of aviation safety standards and safe systems of work Ability to work effectively within a safety-critical operational environment Strong communication and team leadership skills Eligible to obtain and maintain BPSS and SC Security Clearance Qualifications Completion of a recognised Engineering Apprenticeship, ideally in Aeronautical Engineering or military equivalent City & Guilds 2675 or 2661 in Aeronautical Engineering & Maintenance, or equivalent qualification Strong technical background supported by structured training and practical experience Working Environment Based at RAF Valley, Isle of Anglesey Military aviation maintenance environment Structured team supporting operational aircraft maintenance activities Opportunity to work within a highly skilled engineering and supervisory team This is a fantastic opportunity for an experienced aviation professional to step into a supervisory position supporting critical aircraft maintenance operations within a respected military aviation programme. Please send a CV to (url removed) or apply directly!

On behalf of our client, we are seeking to recruit B1.3 Engineers to join on an initial 6-month contract. As the B1.3 Engineer you will be working for the worlds largest helicopter manufacturer and carry out the certification of maintenance and repair on rotorcraft AS350, AS355 Series, AS365, EC120, EC130, EC135, EC145 and EC155. Role: B1.3 Engineer Pay: 80.26 per hour Via Umbrella Location: Shawbury. RAF Valley or Oxford Contract: Monday - Friday 37.5 hours per week , 6 months contract IR35 Status: Inside Security Clearance : BPSS, will require SC Clearnce Responsibilities Accomplishment of Maintenance inspections and repairs as directed by Maintenance Supervisors. This is a certifying role that requires a Part 66 Licence in B1.3 (Turbine Rotorcraft). The ability to work as a team leader and to high standards to ensure continued safe operation of the aircraft. Working knowledge of UK CAA regulations most importantly Part 145, Part M and UK ANO requirements is essential. Completion of maintenance, including airframe structure, power plant and mechanical and electrical systems. Replacement of avionic line replaceable units, requiring simple tests to prove their serviceability. Supervision of maintenance fitters and the certification of their work. Also required to assist in day to day running of Hangar, including aircraft movement and general housekeeping responsibilities. Essential Skills: Part 66 B1.3 Licence Applicants must meet any/all requirements of ITAR and Export Compliance Regulations. Thorough knowledge of engine and airframe systems and specialised test equipment. Ability to work as part of a team and on own initiative Flexible to the requirements of the company and needs of the customer. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

Systems Engineer Location: Gloucester This is an exciting opportunity for a Systems Engineer to join a growing engineering team in Gloucester. Working on cutting-edge aerospace programmes, you will play a key role in the development, analysis and validation of aircraft landing gear systems, supporting everything from research and technology projects through to full product development and in-service support. This is an exciting opportunity for an engineer with a passion for systems analysis, simulation and integration to contribute to innovative solutions within a highly regulated and technically challenging environment. What You'll Be Doing As a Systems Engineer, you will work across complex mechanical and hydraulic aircraft systems, helping to ensure products meet performance, safety and certification requirements throughout the development lifecycle. Key responsibilities include: Developing computational models and conducting system simulations Performing static and dynamic load calculations Conducting performance, frequency response, modal and stability analyses Investigating shimmy behaviour and failure scenarios Correlating and validating models against test data Defining and validating system performance requirements Creating simulation test cases and establishing pass/fail criteria Collaborating with multidisciplinary engineering teams to optimise system designs Supporting test activities and interpreting results Ensuring delivery against programme schedules, quality standards and cost targets What We're Looking For Essential Skills & Experience Degree (or equivalent qualification) in an Engineering discipline Experience in systems modelling, analysis and simulation Knowledge of landing gear extension and retraction systems Experience analysing shock absorber performance Understanding of recoil analysis, system loads generation and model integration Experience conducting shimmy and stability analysis Proficiency in industry-standard tools such as: MATLAB/Simulink MSC ADAMS AMESim Strong understanding of mechanical principles and dynamic system behaviour Ability to interpret requirements and translate them into robust engineering solutions What's on Offer? Hybrid working arrangements. Opportunity to work on major aerospace development programmes The chance to contribute to the design and development of world-class aerospace systems Apply today to be part of a team delivering excellence in Systems Integration & Test. This vacancy is being advertised by Belcan

We are seeking a Commodity Buyer - Machined Parts to join Safran Landing Systems, the world leader in aircraft landing and braking systems. Based in Gloucester, you will play a key role in managing and developing relationships with a portfolio of machining suppliers, supporting the delivery of critical components for both commercial and military aerospace programmes. Location: Gloucester Working Pattern: Hybrid Safran Landing Systems, the world leader in aircraft landing and braking systems, is seeking a Commodity Buyer - Machined Parts to join its Gloucester-based team. This is an exciting opportunity to play a key role in managing and developing a portfolio of specialist machining suppliers, supporting the production of landing gear systems for major commercial and military aircraft programmes. Within the Landing Gears Integration Department, reporting to the Division's Commodity Manager - Machined Parts, you will structure, develop and manage the relationship with a group of suppliers specialized in machined parts by exercising the following responsibilities : Key Responsibilities Manage a dedicated portfolio of machinists suppliers located predominantly within the UK Manage the relationship from the sourcing (RFQ) up to the contract management during the life of the Contract Accountable for the relationship with each supplier of the allocated panel Accountable for the cost reduction plan with the supplier panel assigned Contribute to set-up, then formalize and execute the strategy for the Machined-Parts Commodity Creation and management of RFQ process through the Supplier Selection and establishment of Safran Landing Systems contractual conditions with Suppliers Manage contracts in place with Suppliers assigned and anticipate renewals of contract, through J1 and Supplier Selection Committees Actively work to increase the maturity level of the supplier panel to the required level. Actively monitoring the performance of the supplier, and engage actions in collaboration with the Supplier Performance & Quality Lead Identify cost reduction opportunities, manage the cost reduction plan, and report figures in the design KPI tool (SIEVO) Interface with other functions on all sites (Procurement, Production, Program, Quality, Industrialization) and act as a Purchasing focal point for the supplier panel allocated Resolve daily (tactical) issues related with suppliers, such as claims & litigations. Mandatory (essential): A relevant University Degree and/or APICS, CPIM or CIRM/PMAC Certification. Experience working in a manufacturing environment, international experience in Aerospace preferred or in Mechanical Industrial Engineering; Significant Purchasing experience Experience in leading Projects within multi-functional teams. Familiarity with Contracts, contract language and the ability to negotiate various types of contracts with suppliers Purchasing process leadership skills Strong negotiation skills Excellent verbal and written skills and the ability to communicate effectively in a team environment and represent the Purchasing function towards the Supplier High working knowledge of Microsoft Office applications Experience with accounting and financial principles Production control process knowledge, MRP and Flow Management. Ability to travel on short or long term within Europe, as per project needs Good knowledge of MRP system Good to have (desirable): Good knowledge of SAP environment

Based Wokingham, Berkshire Full Time Monday to Friday Salary: up to £46,000 depending on skills and experience Avia Technique is a leading UK aviation maintenance and repair centre, specialising in critical safety and survival equipment. We're currently seeking a skilled Technical Team Leader to join our Wokingham facility, to lead a small team of skilled technicians responsible for the repairing, maintaining and inspection of Line Replacement Units (LRUs). This is an excellent opportunity for a technically skilled engineer with strong leadership capabilities who is passionate about developing people, driving operational excellence and maintaining the highest standards of safety, quality and compliance. The Role As Team Leader, you will be responsible for the day-to-day management of the Eaton Pump Workshop, ensuring production targets, customer turnaround times and departmental KPIs are achieved whilst maintaining regulatory compliance and exceptional quality standards. You will lead by example, providing technical guidance and support to the team while promoting a culture of continuous improvement, accountability and teamwork Key Responsibilities & Accountabilities Lead, motivate and develop a team of workshop technicians. Ensure all maintenance activities are completed in accordance with approved maintenance data, CMMs and company procedures. Oversee the assembly, disassembly, inspection and overhaul of hydraulic pump LRUs. Drive achievement of departmental KPIs, productivity targets and customer turnaround times. Manage workload prioritisation and resource allocation within the workshop. Ensure compliance with aviation regulations, company quality procedures and health & safety requirements. Identify training needs and support the development of team members through coaching and performance reviews. Promote LEAN principles and continuous improvement initiatives to enhance efficiency and quality. Ensure tooling, equipment and test equipment remain serviceable and within calibration requirements. Support audits, customer visits and technical discussions as the departmental representative. Manage basic people and HR matters within the team. Act as a key holder with Aircraft on Ground (AOG) responsibilities Person profile: Essential Criteria: NVQ Level 3 Engineering qualification or equivalent Strong mechanical engineering background Previous leadership, supervisory or team management experience Excellent problem-solving and decision-making skills Strong understanding of engineering principles and workshop practices High attention to detail and commitment to quality Ability to lead teams, manage workloads and achieve operational targets Excellent communication and organisational skills Commitment to safety, compliance and continuous improvement. Desirable Leadership or Management qualification Health & Safety qualification Experience within an aerospace MRO environment Machining or lapping experience Electronics experience Experience driving LEAN and continuous improvement projects Training and coaching experience What We Offer Avia Technique is committed to investing in our people. We offer excellent training and development opportunities, competitive pay, and a comprehensive benefits package, including: Private Healthcare for employees and their families Monthly Bonus based on company performance 33 Days Holiday (including bank holidays) Enhanced Employer Pension Contributions Employee Assistance Programme Cycle to Work Scheme Tech Spend Scheme Long Service Award Apply now and become part of a team that keeps aviation safe.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. The role of the Lead Systems Engineer - ISR & Sensors, is to provide a blend of high-level system architecture understanding, proof-of-concept analysis and eventual installation standards and governance relating to radars, cameras, RF, VHF, and any other variations of the ISR sensor offerings across coastal towers, antenna masts, vessels, UAVs, and aircraft platforms. The Lead Systems Engineer - ISR & Sensors will own the specification, design, deployment and commissioning of the elements of SRT's core sensor project deployments. The successful operation and functioning of these core systems is as critical to project success as the core MDA product. This is a broad technical role and will require the Lead Systems Engineer - ISR & Sensorsto technically lead other Engineers on the remit of the ISR sensors products not only from a design perspective but also from a deployment and training one; working with ICP and SRT training support teams. Additionally, a large part of the role will require 4th line support when needed in the solving of live system issues on a 24/7 basis where required. Please note - the role of Lead Systems Engineer - ISR & Sensors is a hybrid working role with your "home" office being Bristol, you will also WFH and the position does require international travel in support of our customer projects (sometimes with short notice). Key Responsibilities - Lead Systems Engineer - ISR & Sensors (not exhaustive): Architecture & Technical Design Authority Serve as the Technical Design Authority for all maritime sensor and RF system integrations Ensure compliance with IALA, SOLAS, IMO and other relevant maritime regulatory standards Ensure high-level system architectures through RF performance modelling, carefully designed platform layouts, and integration strategies Lead and approve detailed design packages, ensuring accuracy, consistency, and engineering best practice Hold technical sign-off authority for all sensor and RF system integrations within MDA projects Ensure all solutions comply with contractual deliverables and long-term supportability requirements Sensor Systems Expertise & Performance Lead the integration ISR sensors across fixed sites, towers, vessels, UAVs, and aircraft Oversee mechanical, electrical, RF, and environmental design elements of multi-sensor installations and evaluate new sensors and technologies for suitability, compliance, and integration fit Develop repeatable installation solutions for known and variant platforms, ensuring complete and accurate technical data capture during surveys and configuration activities Analyse and optimise sensor coverage, RFpropagation, performance limits, and environmental impacts Define and validate performance test criteria to ensure compliance and optimal behaviour within integrated MDA systems Provide expert technical guidance for installation, integration, maintenance and performance expectations Oversee proof-of-concept activities and translate results into architectural decisions Project & Cross-Team Responsibilities Input into overall project High-Level Design, collaborating with other Design Authority Architects Create Project Engineering plans to define design tasks, documentation, and dependencies Support project and engineering stakeholders by translating complex technical issues into clear risks and recommendations Identify and escalate technical risks, design gaps, and blockers early Ensure RF and sensor architectures align with infrastructure, networking, and software system requirements Review and approve installation manuals, BOMs, and as-built documentation Coordinate cross-functional engineering activities to ensure consistent, high-quality system delivery Supplier, Customer & Field Engagement Collaborate with suppliers and manufacturers during evaluation, selection, testing, and integration of sensors Represent SRT in customer workshops, surveys, design sessions, and technical reviews in the UK and overseas Visit operational sites - towers, coastal stations, vessels, aircraft, UAV platforms - to validate design, oversee installations, and support performance testing Ensure installation standards are met and correctly audited Provide guidance to engineers involved in RF, platform, and sensor-system integration Benefits Package Excellent salary and package Private health care Career Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. The role of the Lead Systems Engineer - ISR & Sensors, is to provide a blend of high-level system architecture understanding, proof-of-concept analysis and eventual installation standards and governance relating to radars, cameras, RF, VHF, and any other variations of the ISR sensor offerings across coastal towers, antenna masts, vessels, UAVs, and aircraft platforms. The Lead Systems Engineer - ISR & Sensors will own the specification, design, deployment and commissioning of the elements of SRT's core sensor project deployments. The successful operation and functioning of these core systems is as critical to project success as the core MDA product. This is a broad technical role and will require the Lead Systems Engineer - ISR & Sensorsto technically lead other Engineers on the remit of the ISR sensors products not only from a design perspective but also from a deployment and training one; working with ICP and SRT training support teams. Additionally, a large part of the role will require 4th line support when needed in the solving of live system issues on a 24/7 basis where required. Please note - the role of Lead Systems Engineer - ISR & Sensors is a hybrid working role with your "home" office being Bristol, you will also WFH and the position does require international travel in support of our customer projects (sometimes with short notice). Key Responsibilities - Lead Systems Engineer - ISR & Sensors (not exhaustive): Architecture & Technical Design Authority Serve as the Technical Design Authority for all maritime sensor and RF system integrations Ensure compliance with IALA, SOLAS, IMO and other relevant maritime regulatory standards Ensure high-level system architectures through RF performance modelling, carefully designed platform layouts, and integration strategies Lead and approve detailed design packages, ensuring accuracy, consistency, and engineering best practice Hold technical sign-off authority for all sensor and RF system integrations within MDA projects Ensure all solutions comply with contractual deliverables and long-term supportability requirements Sensor Systems Expertise & Performance Lead the integration ISR sensors across fixed sites, towers, vessels, UAVs, and aircraft Oversee mechanical, electrical, RF, and environmental design elements of multi-sensor installations and evaluate new sensors and technologies for suitability, compliance, and integration fit Develop repeatable installation solutions for known and variant platforms, ensuring complete and accurate technical data capture during surveys and configuration activities Analyse and optimise sensor coverage, RFpropagation, performance limits, and environmental impacts Define and validate performance test criteria to ensure compliance and optimal behaviour within integrated MDA systems Provide expert technical guidance for installation, integration, maintenance and performance expectations Oversee proof-of-concept activities and translate results into architectural decisions Project & Cross-Team Responsibilities Input into overall project High-Level Design, collaborating with other Design Authority Architects Create Project Engineering plans to define design tasks, documentation, and dependencies Support project and engineering stakeholders by translating complex technical issues into clear risks and recommendations Identify and escalate technical risks, design gaps, and blockers early Ensure RF and sensor architectures align with infrastructure, networking, and software system requirements Review and approve installation manuals, BOMs, and as-built documentation Coordinate cross-functional engineering activities to ensure consistent, high-quality system delivery Supplier, Customer & Field Engagement Collaborate with suppliers and manufacturers during evaluation, selection, testing, and integration of sensors Represent SRT in customer workshops, surveys, design sessions, and technical reviews in the UK and overseas Visit operational sites - towers, coastal stations, vessels, aircraft, UAV platforms - to validate design, oversee installations, and support performance testing Ensure installation standards are met and correctly audited Provide guidance to engineers involved in RF, platform, and sensor-system integration Benefits Package Excellent salary and package Private health care Career Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.

SRT Marine Systems plc (SRT) is a market leader in the domain of international marine surveillance technology and systems. We are a respected, established, and an ambitious multi-national company headquartered in the UK with a global customer base. The company has a worldwide impact in the marine sector by leading the next generation of maritime domain awareness technologies "MDA", products, and systems that significantly enhance security, safety, environmental protection, and sustainability. Our customers are global and range from the largest national coast guards to individual vessel owners. SRT is an exciting company where high-quality results are rewarded. We are ambitious and constantly seek to innovate in order to deliver better products and services to our customers. We strive to make SRT a rewarding and challenging place to work, where talented, hard-working individuals have the opportunity to make a real impact across the marine industry. The role of the Lead Systems Engineer - ISR & Sensors, is to provide a blend of high-level system architecture understanding, proof-of-concept analysis and eventual installation standards and governance relating to radars, cameras, RF, VHF, and any other variations of the ISR sensor offerings across coastal towers, antenna masts, vessels, UAVs, and aircraft platforms. The Lead Systems Engineer - ISR & Sensors will own the specification, design, deployment and commissioning of the elements of SRT's core sensor project deployments. The successful operation and functioning of these core systems is as critical to project success as the core MDA product. This is a broad technical role and will require the Lead Systems Engineer - ISR & Sensors totechnically lead other Engineers on the remit of the ISR sensors products not only from a design perspective but also from a deployment and training one; working with ICP and SRT training support teams. Additionally, a large part of the role will require 4th line support when needed in the solving of live system issues on a 24/7 basis where required. Please note - the role of Lead Systems Engineer - ISR & Sensors is a hybrid working role with your "home" office being Bristol, you will also WFH and the position does require international travel in support of our customer projects (sometimes with short notice). Key Responsibilities - Lead Systems Engineer - ISR & Sensors (not exhaustive): Architecture & Technical Design Authority Serve as the Technical Design Authority for all maritime sensor and RF system integrations Ensure compliance with IALA, SOLAS, IMO and other relevant maritime regulatory standards Ensure high-level system architectures through RF performance modelling, carefully designed platform layouts, and integration strategies Lead and approve detailed design packages, ensuring accuracy, consistency, and engineering best practice Hold technical sign-off authority for all sensor and RF system integrations within MDA projects Ensure all solutions comply with contractual deliverables and long-term supportability requirements Sensor Systems Expertise & Performance Lead the integration ISR sensors across fixed sites, towers, vessels, UAVs, and aircraft Oversee mechanical, electrical, RF, and environmental design elements of multi-sensor installations and evaluate new sensors and technologies for suitability, compliance, and integration fit Develop repeatable installation solutions for known and variant platforms, ensuring complete and accurate technical data capture during surveys and configuration activities Analyse and optimise sensor coverage, RF propagation, performance limits, and environmental impacts Define and validate performance test criteria to ensure compliance and optimal behaviour within integrated MDA systems Provide expert technical guidance for installation, integration, maintenance and performance expectations Oversee proof-of-concept activities and translate results into architectural decisions Project & Cross-Team Responsibilities Input into overall project High-Level Design, collaborating with other Design Authority Architects Create Project Engineering plans to define design tasks, documentation, and dependencies Support project and engineering stakeholders by translating complex technical issues into clear risks and recommendations Identify and escalate technical risks, design gaps, and blockers early Ensure RF and sensor architectures align with infrastructure, networking, and software system requirements Review and approve installation manuals, BOMs, and as-built documentation Coordinate cross-functional engineering activities to ensure consistent, high-quality system delivery Supplier, Customer & Field Engagement Collaborate with suppliers and manufacturers during evaluation, selection, testing, and integration of sensors Represent SRT in customer workshops, surveys, design sessions, and technical reviews in the UK and overseas Visit operational sites - towers, coastal stations, vessels, aircraft, UAV platforms - to validate design, oversee installations, and support performance testing Ensure installation standards are met and correctly audited Provide guidance to engineers involved in RF, platform, and sensor-system integration Benefits Package Excellent salary and package Private health care Career Development opportunities SRT Marine Systems plc are an equal opportunity employer. We are committed to creating an inclusive working environment for all employees and actively encourage applications from all sectors of the community.

Production / MRO Technician (Repairs) Aerospace Location: Bedhampton Long Term contract The Opportunity We are recruiting for a Production / Repairs Technician to join a leading aerospace manufacturing environment. This is a fantastic opportunity to work on high-performance hydraulic systems that support both civil and military aircraft, within a well-established and innovative organisation. Key Responsibilities Assemble, disassemble, and rebuild hydraulic components (LRUs) Carry out repair and overhaul activities to a high standard Use a wide range of tools and specialised test equipment Interpret engineering drawings, manuals, and schematics Perform inspections and identify faulty components Follow strict aerospace procedures and safety standards (CMM, 5S) Support continuous improvement and process enhancement initiatives Maintain a clean, safe, and organised working environment Requirements Experience in manufacturing / mechanical assembly (minimum 2 years) Strong ability to read engineering drawings and work instructions Experience using hand tools, measuring equipment, and test rigs High attention to detail and problem-solving skills Ability to work both independently and as part of a team Must be able to comply with ITAR regulations Desirable Aerospace or MRO experience Apprenticeship within a Part 145 or similar environment Experience with hydraulic systems or electromechanical products What s on Offer Work within a cutting-edge aerospace environment Opportunity for progression and cross-training Strong team culture and supportive leadership Competitive salary and benefits package Interested? Apply now or get in touch for a confidential conversation.

Aircraft Mechanic - Permanent - South Wales- Salary: £37,000 + £6,000 shift allowance- Hours: Day shift, Mon-Thurs with early Friday finish- Contract: Permanent, full-timeWe're supporting a leading MRO company in South Wales who are expanding their base maintenance team. This is a fantastic opportunity for an experienced Aircraft Mechanic to join on a permanent basis.What makes this role different?- You'll work from 1st September to 31st May (around 9 months)- Summer off - but paid all year round- Competitive salary package: £37,000 + £6,000 shift allowanceAbout the Role- Carrying out base maintenance activities on commercial aircraft- Performing scheduled and unscheduled maintenance tasks- Ensuring compliance with safety and quality procedures- Supporting a busy base environment with a strong focus on efficiency and standardsWhat We're Looking For- Previous base maintenance experience is essential- Ideally experience working on the Boeing 737NG, but not strictly required- Strong aircraft maintenance background with a good eye for detail- Ability to work effectively as part of a professional engineering team Interested? Apply today to find out more about this rare opportunity to enjoy a summer off while still earning a full salary.

Contract Stress Engineer - Aircraft Fuel Systems Belcan is seeking a talented Stress Engineer to support a defence aircraft Fuel Systems Programme, delivering critical structural and stress analysis activities that directly contribute to aircraft safety, airworthiness and operational capability, based from our Bristol office on a Hybrid work pattern on an initial 12 month contract Inside IR35. Working within a multidisciplinary engineering environment, the Stress Engineer will assess and substantiate fuel system components, pipework, brackets and associated assemblies, supporting both ongoing development and in-service fleet requirements. This is an excellent opportunity to work on a prestigious defence programme where your technical expertise will have a real-world impact. What you will be doing: Performing structural and stress assessments on Eurofighter fuel system installations and components Developing analytical and finite element models using industry-standard tools Producing substantiation reports and certification evidence Assessing design modifications, non-conformances and repair solutions Supporting airworthiness, certification and investigation activities Collaborating with design, manufacturing, systems and certification teams What we're looking for: Degree in Aerospace, Mechanical Engineering or a related discipline Experience in structural or stress analysis within aerospace or another highly regulated environment Knowledge of static strength, fatigue, durability and damage tolerance principles Strong hand calculation and engineering judgement skills Experience producing technical reports and presenting engineering recommendations Desirable Experience: Military aerospace programmes Fuel systems design and certification Airworthiness and certification environments HyperWorks and CAE Pipe experience Successful applicants must meet eligibility requirements to obtain UK Security Clearance Why join Belcan? Join a team supporting a flagship defence programme, working on technically challenging engineering projects that contribute directly to the safety, performance and availability of a world-leading combat aircraft. Apply now and take your engineering career to new heights with Belcan. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan

On behalf of our client, we are seeking to recruit a Goods In Quality Inspector on an initial 12-month contract. Based at RAF Brize Norton, you will work closely with the Logistics Manager and wider team to ensure all quality gate processes are followed before items are accepted into Part 145 stores, while supporting compliance with regulatory and quality standards. Role: Goods In Quality Inspector Pay: Up to 22 per hour Via Umbrella Location: Brize Norton Contract: Monday - Friday 37 Hours per week, 12 Months contract (Shift work will be required after the first 6 months) IR35 Status: Inside Security Clearance : BPSS Responsibilities Receipt and evaluation inspections of complex components and assemblies using pre-set inspection plans Ensure compliance with all associated quality procedures, airworthiness control plans, and quality management system requirements Using aerospace knowledge and expertise to inspect finished products, thereby ensuring conformance with MAA/FAA/EASA Part 145 specifications and established quality standards, including customer requirements Maintain material batch and manufacturer traceability information Issue Discrepancy Reports and assisting in the resolution of customer complaints and Supplier quality problems Document and record non-conformance process issues concerning business operations Represent the Quality Management Department during internal meetings, working committees and modification programs Essential Skills: 5-7 years of knowledge of aircraft operations, materials and practices 5-7 years' experience under MAA Part 145 or EASA Part 145. Part21 experience could be also considered Knowledge of AS9100 and First Article Inspection An associate degree, two years of university or technical school within aerospace engineering, system engineering, electromechanical or similar. Logistic or Inventory management experience Experience of a customer facing role in either a military or civilian aviation environment Good computer skills, including Microsoft Office Working knowledge of a QMS system for logistics operations and regulatory requirements for control of inventory Other For the first 6 months you will work standard office hours (Monday to Thursday (Apply online only); Friday (Apply online only . After you will be required to work earlies and lates between the hours of 0700 and 1900 Monday to Friday only If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"

M&E Global is a defence contractor undertaking services on complex military equipment and aircraft for UK and US contractors. We have a fantastic opportunity for a Chinook Mechanic to join our team. The Role Based in the Megara, Greece you ll get to work alongside our dedicated workforce on a US Military base. This role is a fantastic chance for you to further develop your skills as a Chinook Mechanic, working in an exciting environment. Knowledge and Skills Required To perform this job successfully an individual must be able to fulfill each of the following essential duties: You must have minimum 3 years experience working on the desired aircraft. Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and logistics information systems. Able to prioritize workloads to maintain schedules on assigned projects and the ability to lead teams through complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance performed by mechanics. The post holder will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Deployment Package and Additional Benefits Our recruitment team will be happy to discuss the deployment package and additional benefits in more detail. Here is a general outline : Weekly pay is extremely competitive. Sourced accommodation. Potential to earn more with overtime. Travel allowance to cover your initial travel to Greece All tools will be included on this contract. Annual Sign on Bonus Annual Completion Bonus This is a great opportunity to work overseas, continue a career in contracting or experience it for the first time. Do you know someone who would be suitable for this role? We offer a referral fee of £200 for anyone you refer to this contract that we hire. They must be a new referral, previously unknown to us and complete 12 weeks work on contract. Please ensure that you read and agree to our privacy policy, which can be found on our website under the privacy policy section, which explains how we will use your personal data. By providing us with your CV and details in respect to this advertisement, you are providing your consent for us to use this data. The deployment package varies from role to role and will depend on your current circumstances.

Role: Production Technician Location: Biggleswade Hours: Monday to Friday, 40 hours a week Salary: £28,000 - £32,000 per annum An excellent opportunity has now arisen for an experienced Production Technician to join a well-established and growing organisation based in Biggleswade. Full on-the-job training will be provided, so aviation experience is not essential. Duties of a Production Technician: Disassemble and clean aircraft propellers and related components using standard and specialist hand tools and measuring equipment. Carry out plastic media and glass blasting. Process aluminium blade grinding. Work effectively within a small team and independently with minimal supervision. Take responsibility for your work and maintain high standards. Perform other reasonable tasks as required by management. Develop technical competence and grow within the aviation sector. What we would like from you: Experience with hand tools in engineering, automotive, or similar industries is advantageous. Mechanical hobbies involving disassembly are considered transferable skills. Strong work ethic, attention to detail, and reliability. Able to work independently and collaboratively within a team. Punctual and dependable. Reasonable level of physical fitness. If you are interested in this role, please apply below with your most recent CV. BEDFORDPERM By applying to this job advertisement, you confirm you have read and understood our Data Protection and Privacy statement and give OA Group authorisation to hold you provided data . Thank you for your interest in this vacancy, which is being advertised by OA Group, who are acting as an employment agency / business. Your application will be considered in competition with others and we will contact you within 3 working days.

Aircraft Mechanic (5 positions available) Location: Norwich Salary: 38,608 Hours: 37.5 hours per week (seasonal working pattern) The Opportunity We're looking for an experienced Aircraft Mechanic to join a well established aircraft maintenance organisation supporting base maintenance operations in a regulated Part 145 environment. This is an excellent opportunity to join a stable employer offering a strong benefits package, structured working hours, and long term career development. You'll work as part of a skilled maintenance team carrying out aircraft maintenance in accordance with approved maintenance data while ensuring the highest standards of safety, quality and airworthiness. Working Hours This role operates on a seasonal shift pattern: Winter (Mid October to Mid April) Monday to Thursday: 07:30 to 16:30 Friday: 07:30 to 16:00 Summer (Mid April to Mid October) Monday to Thursday: 07:30 to 14:30 Friday: 07:30 to 14:00 Depending on your start date, summer hours may temporarily be 07:30 to 15:30 to maintain the annual average working week. Responsibilities As an Aircraft Mechanic, you will: Carry out aircraft maintenance in accordance with approved maintenance data and company procedures. Complete maintenance activities safely, efficiently and to the required airworthiness standards. Ensure all maintenance work is accurately documented. Follow all company Health & Safety policies and report any hazards, incidents or near misses. Maintain excellent housekeeping standards within the work area. Ensure effective shift handovers. Maintain and control personal tooling in line with company procedures. Report airworthiness and safety concerns through the internal reporting system. Support aircraft maintenance activities at outstations when required. What We're Looking For To be considered, you'll ideally have: A recognised Aircraft Engineering Apprenticeship or Armed Forces aircraft engineering training. Human Factors training. Fuel Tank Safety (FTS) training. EWIS (Electrical Wiring Interconnection Systems) training. Basic understanding of UK CAA/EASA Part 145 requirements and Health & Safety legislation. Basic IT skills. Knowledge of aircraft maintenance documentation and approved maintenance procedures. About You You'll be someone who: Takes pride in producing high quality work. Communicates effectively with colleagues across the maintenance team. Works well independently and as part of a team. Has a proactive, positive attitude and a willingness to learn. Manages time effectively and works efficiently. Demonstrates integrity, professionalism and accountability. Is confident raising safety or quality concerns where appropriate. Understands the importance of delivering work safely, compliantly and on time. Benefits In return, you'll receive an excellent package including: Salary of 38,608 Enhanced sick pay that increases with length of service Additional annual leave for long service Health Shield cash plan Subsidised on site canteen Stakeholder pension with up to 6% employer contribution Life assurance Retail discounts Cycle to Work scheme Electric Vehicle scheme Wellbeing support Active social club and company events Long service awards Free on site parking

Key Duties & Responsibilities Working alongside the Senior Engineer/Production Managers you will supervise an experienced team of mechanical and structures technicians, overseeing detailed inspections in accordance with PDAMs AMMs/FIMs and SRMs to ensure the highest standards are maintained. You will lead by example, promoting a culture of safety and operational efficiency. Your responsibilities will include coordinating tasks and supporting the smooth delivery of the Depot maintenance program. As a key point of contact for all mechanical and structural aspects of the programme, you will work closely with the Lead Engineers and provide regular progress updates to your Senior Engineer/ Line Manager, including any issues that may arise. Detailed inspection IAW Boeing aircraft Manuals Knowledge of RA-4807 (RA-4806) is followed and understood for certifying and support staff Interpret technical manuals, schematics, and regulatory requirements. Track adherence to allocated task card hours for structures / mechanical maintenance and modifications. Identify discrepancies between planned and actual hours, analysing root causes. Escalate variations to stakeholders, including line managers, planners, and program team Recommend process improvements to optimise efficiency and resource allocation. Support mechanical system testing, validation, and troubleshooting. Provide mentorship to junior structures / mechanical personnel. Skills and Abilities CAA/EASA Part 66 B1 License Type rated on Boeing 737NG/P8 Poseidon Held previous P8 Poseidon authorisations Minimum of 7 years aircraft experience Previous Depot Maintenance experience Inspection experience in Depot maintenance environments Excellent knowledge of Aircraft systems Excellent interpersonal skills Excellent communication and organisational skills Knowledge of MS Office applications Eligible to work and live in the UK Subject to UK security Vetting Part-145 Training Requirements Initial Human Factors; Continuation Training Human Factors Initial SFAR phase 1&2; Continuation Training SFAR phase 1&2 Initial EWIS group 1&2 Continuation Training EWIS group 1&2 ETOPS RVSM

Our client is actively recruiting for multiple B1.3 Licensed Aircraft Engineers on a permanent basis in Oxfordshire, to support the maintenance and continued airworthiness of their Rotary fleet. The successful candidate will be responsible for carrying out and certifying maintenance activities in accordance with UK CAA regulations, approved maintenance data, and company procedures. Key Responsibilities: Perform and certify scheduled and unscheduled maintenance on helicopters within the scope of B1.3 licence privileges. Carry out inspections, defect diagnosis, repairs, modifications, and component replacements. Troubleshoot and rectify airframe, engine, transmission, rotor, hydraulic, fuel, and mechanical system defects. Complete Certificates of Release to Service (CRS) in accordance with company authorisations. Ensure all maintenance documentation and technical records are accurately completed. Comply with Part-145 requirements, Safety Management System (SMS) procedures, and company policies. Support line maintenance, base maintenance, and Aircraft on Ground (AOG) recovery activities as required. Supervise and provide technical guidance to mechanics, fitters, and apprentices. Essential Requirements: UK CAA Part-66 B1.3 Aircraft Maintenance Licence (Turbine Rotorcraft). Type rating and certification experience on one or more of the following: H125 H130 H135 H145 H160 Experience within a Part-145 maintenance environment. Strong fault-finding and troubleshooting skills. Excellent understanding of airworthiness and regulatory requirements. Desirable: Multiple Airbus Helicopters type ratings. Ground run authorisation. Rotor track and balance experience. Previous experience supporting EMS, offshore, utility, military, or commercial helicopter operations. Key Competencies: Safety and compliance focused. Strong technical judgement. Excellent attention to detail. Effective communication and teamwork. Ability to work under pressure and meet operational deadlines. If you are a dedicated B1.3 Licensed Engineer with a passion for maintaining and ensuring the airworthiness of rotary aircraft, we would love to hear from you. Apply now to join our client's team in Oxfordshire.