55 jobs found

Title: Calibration Engineer - Medical Devices Location: Witney Contract Type: 12 months Work Schedule: 37.5 hours per week, Monday to Friday Salary: Competitive package ranging up to £60,000 per annum (depending on experience and the position) Job Summary We are seeking a detail-oriented and technically skilled Calibration Engineer to ensure the accuracy, reliability, and compliance of measurement and testing equipment used in the manufacturing, testing, and maintenance of medical devices. The ideal candidate will be responsible for calibration planning, execution, documentation, troubleshooting, and maintaining compliance with applicable regulatory and quality standards. Key Responsibilities Perform calibration, verification, and preventive maintenance of laboratory, production, and inspection equipment. Develop, implement, and maintain calibration schedules and records. Ensure all measurement equipment complies with internal quality requirements and regulatory standards. Troubleshoot and resolve calibration-related issues to minimize equipment downtime. Review calibration certificates and verify traceability to national or international standards. Coordinate with external accredited calibration laboratories when required. Support equipment qualification activities, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Prepare and maintain calibration procedures, work instructions, and standard operating procedures (SOPs). Participate in internal and external quality audits and support regulatory inspections. Analyze calibration trends and recommend corrective and preventive actions (CAPA). Collaborate with Manufacturing, Quality Assurance, Quality Control, Validation, Engineering, and Maintenance teams. Ensure compliance with Good Manufacturing Practices (GMP), Good Documentation Practices (GDP), and company quality policies. Train technicians and operators on calibration procedures and proper equipment handling. Maintain inventory and status labeling of calibrated equipment. Required Qualifications Bachelor's degree in Biomedical Engineering, Electronics Engineering, Electrical Engineering, Instrumentation Engineering, Mechanical Engineering, or a related discipline. 2-5 years of experience in calibration, instrumentation, or equipment maintenance within the medical device, pharmaceutical, or healthcare industry. Knowledge of calibration principles for pressure, temperature, humidity, flow, mass, electrical, dimensional, and analytical instruments. Familiarity with calibration management software and computerized maintenance management systems (CMMS). Strong analytical, documentation, and troubleshooting skills. Excellent communication and teamwork abilities. Randstad Business Support is acting as an Employment Business in relation to this vacancy.

Job Title: High Level Technician (Rolling Stock)Job Location: DerbyHourly Pay Rate: Days - £22.49 PAYE / £29.23 Umbrella Afternoons £26.09 PAYE / £33.98 Umbrella Nights - £29.91 PAYE / £39.01 Umbrella Saturday - £33.74 PAYE /£40.92 Umbrella (All hours) Sunday - £44.98 PAYE /£54.56 Umbrella (All hour)Shifts: Mon - Fri Days 37 hoursDuration: On-going contractStart Date: ASAPIndustries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerClient Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network.The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems Changing relay boxes / Wiper motorsIf you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to OR call PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject

JOB LOCATION: Daventry, UK Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working click apply for full job details

Engineering Technician Market Drayton, Shropshire4 on 4 off (Days & Nights - 7am-7pm / 7pm-7am) Help Power the Future of Engineering at Müller With significant investment transforming our site into one of the most advanced dairy facilities in the UK, we're now expanding our engineering team and looking for Engineering Technicians to play a key role in supporting a highly automated, next-generation production environment. This is a unique opportunity to work at the forefront of modern manufacturing-combining cutting-edge technology, large-scale automation and ongoing site transformation. What you'll be doing Delivering planned preventative maintenance (PPM) to maximise equipment reliability Responding to breakdowns efficiently, minimising downtime in a fast-paced production environment Supporting continuous improvement initiatives and engineering upgrades Collaborating with operations to drive safety, quality and performance Supporting the installation, commissioning and integration of new equipment What you'll be working with Highly automated process and filling lines with advanced PLC systems High-speed blow moulding and hygienic filling technology Multi-axis robotic packaging systems One of the UK's largest pallet cooling and transport systems Site-wide infrastructure including: Combined Heat & Power (CHP) Advanced compressed air systems Sustainability and recycling technologies What we're looking for A time-served Engineering Apprenticeship or Level 3 qualification in an Engineering discipline Experience within a manufacturing or production environment Strong knowledge of reactive and preventative maintenance Experience working with automation, robotics or process equipment (desirable) A proactive approach with strong problem-solving skills A team player committed to high safety and performance standards What you'll get in return £57,289 salary plus 1.5x overtime £5,000 sign-on bonus (paid after successful completion of probation) 5% bonus Health care cash plan 282 hours annual leave The opportunity to work within a state-of-the-art, highly automated site Ongoing investment in training, development and career progression The chance to be part of a major site expansion and transformation journey Why join Müller Market Drayton? This isn't just another engineering role. You'll be joining a site undergoing large-scale investment and growth, working with some of the most advanced technology in the industry, while helping shape the future of engineering at Müller. At Müller, we're committed to creating an inclusive workplace where everyone feels they belong. We welcome applications from all backgrounds and encourage people to apply even if they don't meet every requirement listed. If you need reasonable adjustments at any stage of the recruitment process, please let us know - we're happy to support you. You can find out more about Müller and what it's like to work for us by clicking here Careers at Müller UK & Ireland

JOB LOCATION: This role is based in Daventry, UK. The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations theyre the ones keeping vital machinery running at all times. As an RME Technician, youll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices click apply for full job details

Production Maintenance Team Leader 12 Month Fixed Term Contract 7.00pm - 7.00am Monday/Tuesday/Wednesday/Thursday Petersfield Basic + Excellent Shift Premium My client is seeking an experienced Production Maintenance Team Leader. If you have a strong engineering background covering mechanical and electrical engineering with experience of leading maintenance teams within a fast-paced FMCG, pharmaceutical or manufacturing environments? This is a fantastic opportunity to lead a team of Production Maintenance Technicians, ensuring engineering support is delivered safely, efficiently and effectively while driving continuous improvement across manufacturing operations. This role is offered initially on a 12-month contract basis, working a night shift pattern of 7.00pm - 7.00am Monday - Thursday. A competitive shift premium is offered for this role. Key Responsibilities: Lead, coach and develop a team of Production Maintenance Technicians and Electricians. Plan and prioritise engineering activities to maximise equipment uptime and minimise production downtime. Drive Planned Preventative Maintenance (PPM) programmes and equipment lifecycle management. Manage team performance, attendance, training and development through regular reviews and coaching. Support production by providing responsive engineering support across a 24-hour manufacturing operation. Identify and implement continuous improvement initiatives to improve reliability, reduce waste and deliver cost savings. Collaborate with Production, Quality and other support functions to resolve engineering issues and achieve site KPIs. Ensure all engineering activities comply with Health & Safety, GMP and regulatory requirements. Lead engineering improvement projects and act as a subject matter expert across the business. Qualifications: Recognised Engineering Apprenticeship or equivalent vocational qualification. Previous experience leading engineering or maintenance teams within FMCG, pharmaceutical, cosmetics or a similar manufacturing environment. Strong mechanical and/or electrical engineering knowledge. Experience managing preventative maintenance programmes and engineering resources. Proven people management skills, including performance management, coaching and team development. Excellent communication, planning and organisational skills. Strong understanding of Health & Safety, GMP and continuous improvement methodologies. Ability to make informed decisions in a fast-paced production environment while maintaining high engineering standards.

Instrument Technician (Days) - Permanent Location: Ayrshire, Scotland Salary: £55,000 + Pension + Overtime + Excellent Training & Development An excellent opportunity has arisen for an experienced Instrument Technician with compex 01-04 to join a well-established, high-performing manufacturing site operating within a highly regulated process environment. This is a permanent dayshift position , offering an excellent work-life balance alongside long-term career development. The successful candidate will become a key member of a close-knit maintenance team and will play an important role in mentoring and supporting the development of a younger engineering team , making this an ideal opportunity for someone who enjoys sharing knowledge and helping others progress. The Role You will be responsible for carrying out preventative and reactive instrumentation maintenance across the site, ensuring plant reliability, safety and operational performance. Key responsibilities include: Carrying out planned preventative and reactive maintenance on plant instrumentation. Diagnosing faults and completing repairs efficiently and safely. Maintaining and calibrating instrumentation including temperature, pressure, level, flow, pH and control valves. Ensuring all work is completed in line with site safety procedures and permit-to-work systems. Completing maintenance documentation and updating SAP records accurately. Supporting continuous improvement initiatives across maintenance activities. Working collaboratively with production and engineering teams to maximise plant availability. Acting as a mentor to junior technicians and apprentices, supporting their technical development. What We're Looking For Minimum of two years' experience as an Instrument Technician within a process manufacturing, chemical or heavy industrial environment. Compex 01-04 HNC (or equivalent) in a relevant engineering discipline. Strong fault-finding, calibration and instrumentation maintenance experience. Knowledge of Functional Safety or Machine Safety would be advantageous. Experience working in hazardous areas (ATEX); Electrical maintenance experience would be beneficial but is not essential. Salary & Benefits £55,000 basic salary. Permanent dayshift role. Excellent pension scheme with company contributions of up to 12%, depending on employee contributions. Significant overtime opportunities, dependent on plant requirements. Comprehensive technical training including opportunities to gain: CompEx certification. Functional Safety training. Additional specialist instrumentation training. The opportunity to complete an Electrical SVQ , allowing you to become dual-skilled. Overtime & Payback Hours The role includes 120 annual payback hours, with the business committed to offering a minimum of 14 hours per month. In practice, many engineers complete these hours during planned site shutdowns, with the majority finishing their annual commitment by August, following the main maintenance outage period in April and May. Any additional overtime thereafter is dependent on operational and plant requirements and paid at time and a half. Why Apply? This is a fantastic opportunity to join a stable and forward-thinking employer that invests heavily in its people. Alongside a competitive salary and generous benefits package, you'll enjoy genuine opportunities for technical development, long-term career progression and the chance to make a real impact by mentoring and developing the next generation of engineers.

Job Title: Electrical Maintenance Technician Location: Harlow, Essex Job Type: Permanent Shift: 12-hour day shifts on a 2-week cycle. 7am - 7pm SRG are currently looking for a skilled Electrical Engineering Technician to join a high-performing maintenance team within a process manufacturing environment. This role focuses on delivering both preventative and reactive maintenance, ensuring high levels of plant reliability and operational performance. You'll play a key role in troubleshooting, maintaining, and improving site equipment while working closely with production and engineering teams in a fast-paced setting. Key Responsibilities (including but not limited to): Perform planned and breakdown maintenance on a range of process and plant equipment Diagnose faults and carry out effective and timely repairs to minimise downtime Ensure all maintenance activities comply with safety, environmental, and operational standards Accurately complete maintenance logs, job cards, and CMMS records (e.g. SAP) Support equipment reliability and plant availability targets Assist with maintenance planning, parts identification, and stock control Liaise with engineering, maintenance, and production teams to ensure smooth operations Provide clear shift handovers and communicate ongoing work effectively Support and oversee external contractors when required Criteria: Apprenticeship or Level 3 NVQ in Electrical Engineering (or equivalent) Qualified to 18th Edition Wiring Regulations CompEx certification (minimum ExF) - ideally Ex01-Ex06 Experience with Control & Instrumentation (C&I) is highly desirable Strong experience in fault finding and problem solving on industrial equipment Good working knowledge of process machinery and plant systems. If interested, please apply or contact Julia for more information: (phone number removed) Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Harwell, Oxfordshire - based onsite 3-year fixed-term appointment About Us Diamond Light Source is the UK's national synchrotron; a huge scientific facility designed to produce very intense beams of X-rays, infrared and ultraviolet light. Our scientists use the light to study a vast range of subject matter, from new medicines and treatments for disease to innovative engineering and cutting-edge technology. At Diamond we are currently undertaking a major upgrade of the facility, known as Diamond-II. Diamond-II will combine a new machine and new beamlines with a comprehensive series of upgrades to optics, detectors, sample environments, sample delivery capabilities and computing, which will ultimately generate an even more brilliant light source at a higher energy. About the Role We now have an opportunity for a Senior Power Supplies Technician to join the Power Supplies Group on a 3-year fixed-term appointment, supporting both the reliable operation of Diamond's existing accelerator power converter systems and the delivery of new power supply systems for the Diamond-II upgrade. This role will contribute directly to the development, testing, installation and commissioning of high-performance magnet power supplies and associated equipment, with a strong focus on quality, reliability, stability and safe delivery. Key responsibilities will include: Diagnosing and repairing faults on circuit boards and electronic assemblies at component level. Building, modifying and maintaining test equipment, test fixtures and associated hardware. Testing circuit boards, modules, sub-racks and complete power supply racks received from manufacturers or assembled in-house. Supporting integration testing of power supply systems, including backplanes, controller interfaces, interlocks, cabling and rack-level assemblies. Preparing materials, components and equipment for installation and commissioning activities. Supporting and supervising electrical wiring activities for new installations, ensuring work is completed safely and to the required standard. Commissioning installed equipment and supporting handover into operation. Procuring parts and services, including liaison with suppliers and manufacturers where required. Supporting the operation of Diamond's power converters, including troubleshooting, repair, participation in the 24-hour on-call rota, and occasional shift or out-of-hours working where required to support operations, shutdowns, installations or commissioning activities. Investigating beam trips and operational issues attributable to power converters, and supporting continuous improvement to minimise recurrence. Preparing power converters for operation after shutdowns, maintenance periods and upgrade activities. Organising repair, calibration and maintenance of test equipment and operational assets. Contributing to documentation, test records, procedures and quality assurance activities associated with Diamond-II delivery. About You You will hold an appropriate HNC, HND or degree in a relevant engineering discipline, or demonstrate equivalent relevant experience gained in an electrical, electronic or power electronics environment. You will have practical experience working with power supplies, power converters, electronic assemblies or similar electrical/electronic systems, together with a good working knowledge of engineering drawings, wiring diagrams and schematics. You will also have experience of laboratory-based testing, fault finding and measurement techniques, and be confident using test equipment such as oscilloscopes, multimeters, power analysers, signal generators or similar instrumentation. Experience in any of the following areas would be advantageous: Commissioning of power electronic systems or complex electrical equipment. Switched-mode power supplies, magnet power supplies, motor drives or inverter systems. Component-level repair of electronic circuit boards and assemblies. Rack build, wiring, integration testing or electrical installation work. Working within a quality assurance, safety or configuration-controlled environment. You will be a practical, detail-focused and safety-conscious technician with good communication and interpersonal skills. You should be able to work effectively with engineers, technicians, operators, suppliers and other stakeholders, and be willing to contribute ideas and practical solutions to technical and operational challenges. The role will require participation in the group's on-call arrangements and may involve occasional shift working or work outside normal office hours, for example during shutdowns, machine recovery, installation and commissioning periods. Visa and Right to Work This position doesn't meet the requirements for visa sponsorship, except potentially for those people that are already sponsored in the UK before April 2024 or meet the criteria of a 'new entrant'. For more information please visit - Benefits Diamond offers an exceptional benefits package to support staff in achieving a positive work/life balance. This includes 26 days annual leave plus Christmas closure, public holidays, 2 annual volunteering days and flexible working hours. We also offer an excellent defined benefit pension scheme. Staff also have access to a range of amenities on site including a nursery, cafes, a restaurant and sports and leisure facilities. A relocation allowance may also be available where applicable. To Apply Please use the online application process to apply and tell us why you believe you are suitable for this 3-year fixed-term role. The closing date for applications is 16th August 2026

Astute's Power Team are recruiting a Lead Mechanical Technician for an Energy from Waste plant located in Belfast. This new role within the maintenance department is focusing on maximising plant availability & reliability by carrying out a variety of engineering tasks on mechanical assets including conveyors, belts, pumps, valves, fans etc click apply for full job details

Are you looking for new challenges and personal growth within Coca-Cola Europacific Partners? Then we have a great opportunity for you! Do you have a personality with the power to influence and connect? Can you sustain the pace to keep on growing? Will you make an impact with your desire to win? Reliability Engineer - Edmonton Contract - Permanent Closing date - 12th August 2026 Edmonton Operations produce 50 million cases of drinks per year across their 7 manufacturing lines. The site can produce up to 142,000 litres of drink every hour consisting of BIB, PET and Glass bottling. As a site Edmonton is single source production in GB for both Bag In Box and Oasis. The site employees over 250 people across Manufacturing, QESH, Distribution and Engineering. For the right candidate there is excellent career opportunities, both within the Edmonton Plant and further afield across other GB and Pan-European locations within the CCEP network. What to expect Reporting into the Maintenance Manager, the Reliability Engineer is a pivotal Site role and in partnership with your Asset Care Planner (ACP) you need to analyse and improve the equipment performance. Working in close partnership with the Production Manager it is graded as a Band 100 (professional banding) to reflect the level of responsibility, flexibility of hours and approach, plus the commitment required to deliver a demanding role in a Factory that operates 24/7. Key to the role are a number of core elements which you will be expected to master :- The site currently operates its maintenance on 6 year life plans with modular and major overhauls. Your role with the ACP is the planning, scheduling and execution of these plans to ensure that line start up after overhaul, hits its targets for quality, safety and performance all within your budget (which you will have complete control of for your area). Reliability focuses on maintenance effectiveness and you will be expected to move the maintenance plans away from a check and inspect mentality to that of a measure and compare to a standard. To do this you will be expected to be able to organise maintenance improvement sessions using failure data, OEM's and line teams to help design the best possible maintenance for your assets in order of criticality and using best practice reliability tools and techniques Act as a Safety role model and ensure all Quality, Environment, Health and Safety standards are fulfilled by CCEP and contractors Manage the annual Maintenance & Repair budget. Lead coach and develop RCA's. Measure the effectiveness of the countermeasures to ensure no re-occurrence. Support the Engineering function on the development of investment projects and new initiatives. Lead, develop and coach the Technicians to ensure they maximise their individual and team performance. Manage the spare parts warehouse in an efficient way (high rotation, right safety stocks, handle write-offs, search of cheaper and reliable spares, etc) Support the PM with analysis of performances losses and asset care KPI's. Skills & Essentials Understand the difference between reliability and maintenance Can demonstrate the implementation of reliability tools and techniques Can demonstrate effective planning and organisational skills required for major and minor overhauls NVQ Level 3 Mechanical/Electrical qualifications or equivalent. Practical machinery maintenance within food processing environments with volatile demand Design asset care strategies Fluid with SAP PM and line information systems We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.

Field Service Engineer (Calibration & Test Equipment) Milton Keynes £35,000-£40,000 DOE (flexibility for the right candidate) Monday to Friday 40 hours per week Company vehicle provided for all customer site visits Split between workshop and customer sites ️ UK and international travel required as part of the role - a valid passport is essential Temp-to-perm opportunity About the Role We're recruiting for a Field Service Engineer (Calibration & Test Equipment) to join a specialist engineering business based in Milton Keynes. Our client is a well-established, internationally recognised engineering business with more than 60 years of experience designing, manufacturing and supporting specialist testing and measurement equipment. Their products are trusted by customers across a wide range of industries where precision, reliability and quality are essential. Operating on a global scale, the company supports customers throughout the UK and overseas, providing installation, calibration, maintenance and technical support for a comprehensive range of specialist equipment. With a strong reputation for engineering excellence and innovation, they continue to invest in new technologies and are committed to delivering exceptional customer service. Joining the business offers the opportunity to work with advanced testing and measurement systems, travel to a diverse range of customer sites across the UK and internationally, and become part of a knowledgeable and supportive engineering team where no two days are the same. This is an excellent opportunity for an engineer with strong mechanical fault-finding skills who enjoys a varied role combining workshop-based repairs with customer site visits. You'll service, maintain, repair and calibrate specialist force measurement and testing equipment while delivering first-class customer support. The role is split between the workshop and customer sites, with regular travel throughout the UK and occasional international travel. As part of the role, you'll need a valid passport and be happy travelling when required. If you have experience in field service, maintenance, calibration, instrumentation or test equipment and are looking to further develop your engineering career, we'd love to hear from you. What You'll Be Doing Service, maintain and calibrate specialist force measurement and testing equipment. Carry out planned preventative maintenance and repairs at customer sites. Travel to customer locations throughout the UK and internationally as required. Diagnose mechanical, hydraulic and basic electronic faults. Replace components, including PCBs where required. Use calibration equipment and accurately record test data. Produce calibration certificates and detailed service reports. Read and interpret engineering drawings and technical documentation. Ensure all work complies with relevant testing standards and quality requirements. Build positive relationships with customers and provide professional technical support. Manage your own workload while working independently both on-site and in the workshop. What We're Looking For We're keen to speak with engineers who have experience servicing, maintaining or repairing engineering equipment. You don't need direct experience with the client's specific products, but you should have a strong engineering background and be confident diagnosing mechanical faults. Essential Skills & Experience Experience servicing, maintaining or calibrating engineering equipment. Strong mechanical fault-finding skills. Good understanding of hydraulic and pneumatic systems. Basic electronics knowledge, including the use of a multimeter and PCB replacement. Ability to read and interpret technical drawings. Good IT skills with experience producing reports and recording calibration data. Full UK driving licence. Valid passport and willingness to travel throughout the UK and internationally. Professional and confident communication skills with the ability to build relationships with customers at all levels. Ability to work independently and manage your own workload. Good level of physical fitness, as some calibration equipment requires manual handling. Desirable Experience Experience in any of the following would be advantageous: Force measurement or test equipment. Calibration or instrumentation. Load cells, LVDTs or electronic transducers. Testing or laboratory equipment. Engineering standards and compliance requirements. Previous field service experience. Suitable Backgrounds This role would suit candidates with experience as a: Field Service Engineer Calibration Engineer Calibration Technician Service Engineer Instrumentation Engineer Test & Measurement Engineer Mechanical Maintenance Engineer Multi-skilled Maintenance Engineer Electronics Technician Hydraulic Engineer Ex-Forces Engineer (REME, RAF or Royal Navy) What's on Offer? £35,000-£40,000 salary , with flexibility for the right experience. Monday to Friday working pattern. Company vehicle provided for all customer visits. A varied role combining workshop-based work with field service. Opportunity to work with specialist force measurement and calibration equipment. UK and international travel. Interested? To find out more or apply, contact:

Maintenance Technician Overview We are currently recruiting for an experienced Maintenance Technician to join a well-established manufacturing company. This is a fantastic opportunity to become part of a busy engineering team responsible for ensuring the smooth operation of production machinery and site equipment through planned preventative maintenance and rapid response to equipment breakdowns. The successful candidate will play a key role in minimising downtime, improving equipment reliability and supporting continuous improvement initiatives within a fast-paced manufacturing environment. Key Responsibilities Carry out planned preventative maintenance (PPM) on a wide range of manufacturing machinery and production equipment. Diagnose and repair mechanical, electrical and pneumatic faults to minimise production downtime. Respond promptly to equipment breakdowns and carry out effective fault finding and repairs. Install, commission and test new machinery and equipment where required. Perform routine inspections to identify potential issues before they result in equipment failure. Maintain conveyors, motors, pumps, gearboxes, bearings, pneumatic systems, hydraulic equipment and other production machinery. Read and interpret engineering drawings, electrical schematics and technical manuals. Record all maintenance activities accurately using maintenance logs or a computerised maintenance management system (CMMS). Liaise closely with production teams to prioritise maintenance activities and ensure minimal disruption to manufacturing operations. Support continuous improvement projects aimed at increasing machine efficiency and reducing downtime. Ensure all maintenance work is completed safely and in accordance with company procedures and health and safety legislation. Maintain high housekeeping standards within the workshop and production areas. Assist with root cause analysis following recurring equipment failures and recommend long-term solutions. Participate in machinery upgrades, modifications and factory improvement projects as required. Skills and Experience Previous experience working as a Maintenance Technician, Maintenance Engineer or Multi-skilled Engineer within a manufacturing or production environment. Strong mechanical maintenance experience with good electrical fault-finding skills. Experience maintaining industrial manufacturing machinery. Knowledge of hydraulic, pneumatic and mechanical systems. Ability to diagnose faults quickly and carry out effective repairs. Comfortable working independently and as part of a maintenance team. Good understanding of health and safety regulations within an industrial environment. Strong problem-solving skills with a proactive approach to preventative maintenance. Good communication skills and the ability to work closely with production teams. Flexible approach to working rotating shifts. Desirable Qualifications Engineering Apprenticeship or NVQ Level 3 (or equivalent) in Mechanical or Electrical Engineering. 18th Edition Wiring Regulations (desirable). PLC fault-finding experience. Experience using CMMS maintenance systems. Forklift licence (desirable). Working Hours This role operates on a rotating weekly shift pattern: Week 1: Monday to Friday, 6.00am to 2.00pm Week 2: Monday to Friday, 2.00pm to 10.00pm The shift pattern alternates weekly. Salary and Benefits Competitive hourly rate or salary depending on experience. Overtime opportunities available. Holiday entitlement. Company pension scheme. Full training and ongoing development opportunities. Long-term career progression within a growing manufacturing business. Free onsite parking. Company workwear and PPE provided. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Mechanical Assembly Technician Location: Slough Salary: 27,000- 28,000 per annum (depending on experience) Job Type: Full-time, Permanent Working Hours: Monday to Friday,8.00am-4.30pm About Trekinetic Our client is a leading manufacturer going through a period of extensive growth, as a result we are looking for an experienced Mechanical Assembly Technician to join their production team on a permanent basis. The Role This is a hands-on workshop-based role where you will be responsible for assembling, servicing and repairing products to the highest standards. You will work as part of a small, friendly team, helping to ensure every product leaving our workshop meets our quality expectations. The role offers variety, with responsibilities ranging from new product assembly through to servicing customer equipment and supporting continuous improvements within production. Full product training will be provided, but previous mechanical assembly experience is essential. Key Responsibilities Assemble units from component level to completed product. Carry out servicing, maintenance and repairs on returned products. Read and follow assembly drawings, work instructions and production documentation. Use a variety of hand tools, power tools and workshop equipment safely and effectively. Inspect completed assemblies to ensure they meet quality standards and specifications. Diagnose mechanical faults and carry out repairs where required. Work closely with colleagues to meet production schedules and delivery deadlines. Maintain a clean, organised and safe working environment. Contribute ideas for improving assembly methods, quality and efficiency. Follow company quality procedures and support our ISO 9001 quality management system. About You We're looking for someone who enjoys practical, hands-on work and takes pride in producing high-quality products. You should have: Previous experience in a mechanical assembly or manufacturing role. A good understanding of mechanical components and assembly techniques. Confidence using hand tools, power tools and general workshop equipment. Strong attention to detail and a commitment to producing work of a consistently high standard. A practical and methodical approach to problem solving. The ability to work independently as well as part of a small production team. Good organisational skills and the ability to manage your workload effectively. A positive attitude, reliability and a willingness to learn. Additional Info Starting salary of 27,000- 28,000 per year , depending on experience. Permanent, full-time employment. 28 days annual leave including bank holidays. An additional day's holiday for each completed year of service, up to a maximum of 5 extra days. Workplace pension scheme. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

PSV Technician (Mechanical / Electrical) Location: West Drayton, Middlesex Salary: 53,000 per annum Shift Pattern: 4 on, 4 off The Opportunity Our client is looking to recruit two experienced Technicians to join its engineering team at the West Drayton depot. We are seeking one Mechanical Technician and one Electrical Technician to help maintain a modern fleet of passenger vehicles to the highest standards of safety, reliability and performance. We are keen to speak with experienced PSV Technicians , but would also welcome applications from HGV Technicians who are looking to transition into the PSV sector. If you have strong mechanical or electrical experience on commercial vehicles and are looking for a new challenge, we'd be pleased to hear from you. This is an excellent opportunity to join a well-established organisation offering a competitive salary, a structured shift pattern and long-term career stability. Key Responsibilities Carry out routine servicing, maintenance and repairs on PSV vehicles. Diagnose and rectify mechanical or electrical faults efficiently. Complete preventative maintenance inspections in line with manufacturer and company standards. Ensure all work is completed safely and complies with DVSA and company regulations. Accurately complete maintenance records and job documentation. Work collaboratively with the wider engineering team to minimise vehicle downtime. Requirements Level 3 qualification in Heavy Vehicle Maintenance & Repair (or equivalent) - essential. Previous experience working on PSV, HGV or other commercial vehicles . Strong diagnostic and fault-finding skills. Good understanding of health and safety procedures. Ability to work independently and as part of a team. Salary & Benefits 53,000 per annum. 4 on, 4 off shift pattern. 20 days annual leave. Stable, long-term opportunity with a leading transport operator. Recruitment Process Stage 1: Technical assessment. Stage 2: Final interview with HR Manager. Pre-Employment Checks Successful applicants will be required to: Provide a full 5-year employment history. Successfully complete a DBS check before commencing employment. Streamline Search is a technical recruitment agency based in Chichester, West Sussex, operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy and, in accordance with GDPR, by applying for this role you are granting us consent to process your data and contact you regarding your application.

PERMANENT JOB OPPORTUNITIES AVAILABLE - MACHINE OPERATOR Are you an experienced Machine Operator looking for stability in your next job role and are you happy working 4 on 4 off shifts (rotating days and nights)? We are proud to be working with a long-standing manufacturer in Telford (Shropshire) who are seeking a Machine Operator to join them on a straight permanent basis, the starting salary for these roles will range between £35,000 - £36,300 per annum and the working hours are 6am-6pm / 6pm - 6am (4 on 4 off shifts rotating days and nights). We are looking for people who live within a 25-mile radius of Telford (Shropshire), and the hiring manager is looking for people who have a minimum of 3 years experience within a similar role. People who have worked in similar job roles such as a Production Technician, Manufacturing Technician, Technical Operator, Process Operator, Conversion Operator, Rewind Operator, Core Rewinder, Skilled Machine Operator, Machine Setter or Skilled Machinist would be well received. The company conduct a 2 stage interview process, the first stage would involve you completing an on-line SHL assessment, with the view to you then being invited to the factory for an on site interview and full factory tour. What's on offer? Highly Competitive Salary: £35,000 £36,300 per annum. Shift Pattern: Consistent 4 on, 4 off (12-hour days and nights, 6-6) allowing for great work-life balance. Stability: A permanent position with a leading manufacturer that values long-term commitment. Growth: A clear path to develop your technical skills in a supportive, high-tech environment. The On-boarding Process: A brief on-line technical assessment to verify your core skills. An on-site interview and factory tour an opportunity for you to see the operation and meet the team. Your Role: As a core member of the production team, you will ensure our high-speed machinery operates at peak efficiency. You will: Set up and operate high-speed machinery with a focus on accuracy and speed. Troubleshoot and adjust machinery to minimize downtime and maximize productivity. Maintain quality standards by conducting regular checks and keeping precise production records. Collaborate with the wider team to exceed daily production targets. What You Bring: Experience: A minimum of 3 years in a similar role (e.g., Production Technician, Manufacturing Technician, Technical Operator, Rewind Operator, or Machine Setter). Industry Knowledge: Experience within the FMCG, Packaging, Food Manufacturing, Print, or Pharmaceutical sectors are highly desirable. Technical Aptitude: Confidence in making minor machine adjustments and performing routine maintenance. Reliability: You live within a 25-mile radius of Telford and are looking for a long-term career move. Ready to advance your career? Apply today with your latest CV. We are looking for people who take pride in their work and want to be part of a winning manufacturing culture. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Maintenance Engineer Location: Reading Salary: Up to £42,000 Monday to Friday 5:00am - 2:00pm We're recruiting for a skilled Maintenance Engineer to join a well-established manufacturing business. This is a fantastic opportunity for an engineer looking for a stable, Monday-Friday role with no weekend work. What we're looking for: NVQ Level 3 qualification in an Engineering discipline Electrical bias preferred, but strong multi-skilled engineers will also be considered Experience working with production machinery, manufacturing equipment, automated systems, or industrial plant machinery Backgrounds considered include manufacturing, production, FMCG, packaging, service engineering, maintenance engineering, and machinery installation/service Key Responsibilities: Planned and reactive maintenance on production equipment Fault finding and repair of electrical and mechanical systems Supporting production teams to minimise downtime Continuous improvement and reliability initiatives Ensuring machinery operates safely and efficiently What's on Offer? £42,000 salary Monday-Friday shift pattern (5am-2pm) Stable and growing business Excellent long-term career prospects If you're an NVQ Level 3 qualified engineer with experience working on machinery in a manufacturing, production, or industrial environment, we'd love to hear from you. Apply today or contact Midlands. INDMID

Let s shape the future of British manufacturing together! Why Choose Bridgnorth Aluminium Bridgnorth Aluminium is an aluminium rolling company with a strong commitment to excellence in manufacturing high quality products. We believe in building the future together. At Bridgnorth Aluminium, your skills, ideas, and passion will help us drive innovation and deliver excellence across the industry. Working within the mechanical team to maintain all plant machinery including both proactive planned maintenance and breakdown repair. General Duties & Responsibilities Safely applying specialist craft skills for the assembly, dismantling, inspection repair and testing of mechanical equipment Reading and understanding construction drawings, designs and system schematics to assess equipment, or systems performance and evaluate the cause of any malfunction. Effect necessary repairs and adjustments. Carrying out breakdown and planned maintenance tasks Receiving Instructions from the Mechanical Maintenance Manager, Reliability Engineer, Reliability Technician, or from planned lists/MTAS to undertake project and maintenance work on the shift in conjunction with fitters and other operations/engineering personnel. Supporting a reliability centred maintenance approach to identifying and undertaking maintenance tasks on major process assets Ensuring product quality by managing throughput issues in the execution of maintenance and improvement works Reporting works completed on the site CMMS systems Responding to site emergencies to recover/restore production in a timely manner Assisting in the training and development of other members of the team and apprentices Essential to the role Essential Time Served Apprenticeship in Mechanical Engineering NVQ level 3 A grounding in mechanical engineering ideally gained through a formal apprenticeship Established skills in general fitting, welding, machining, construction, installation and maintenance techniques Knowledge of the use of precision measurement equipment and instrumentation An understanding of the use of hydraulics systems An understanding of codes and symbols used in drawings for mechanical and hydraulic schemes Computer literacy (ideally conversant in the use of CMMS) and basic office software LOTOTO Good working knowledge of plant and machinery with the area of responsibility to include overhead cranes Working Hours: 4 Vacancies available. Two for Mon - Fri, two for 4 on / 4 off. Shift allowance only applicable for 4 on / 4 off shift. 4 on / 4 off (2 Days / 2 Nights - 12 hour shifts. 6am-6pm / 6pm-6am) Mon - Fri (42 hours - 8am - 4:30pm)

Automation Maintenance Engineer Location: West London Salary: 54,791 + Shift Allowance + Weekend Premiums (OTE 59,000+) Shift: Rotating Days, Lates & Nights TXM Recruit are supporting a major automated distribution business in the search for an experienced Automation Maintenance Engineer to join their engineering team. This is an excellent opportunity to join a highly automated site, working on cutting-edge parcel handling and automation equipment within a fast-paced environment. The Role Carry out planned preventative and reactive maintenance on automated machinery. Diagnose and rectify electrical and mechanical faults. Support continuous improvement projects to improve equipment reliability and performance. Complete maintenance documentation and fault reporting. Work closely with the wider engineering and operations teams to maximise site performance. Requirements NVQ Level 3, ONC or equivalent in Electrical or Mechanical Engineering. Previous experience maintaining automated production or material handling equipment. Strong electrical and mechanical fault-finding skills. Experience within automation, manufacturing, logistics or distribution environments. Full UK Driving Licence. IND4