229 jobs found

Documentation Compliance Inspector About the role We are looking for a highly conscientious Documentation Compliance Inspector (Final Release) to join our Quality team. This is a critical role within our aerospace operation, providing the final independent verification of product documentation before aerospace fasteners and related products are released to customers or dispatched . You will be responsible for ensuring that certification, traceability and supporting quality documentation are complete, accurate and fully compliant with customer requirements, company procedures, applicable product specifications and our Quality Management System. As the final documentation control point, you will play an important role in preventing incorrect, incomplete or potentially non-compliant certification from reaching aerospace customers. Key responsibilities Carry out independent final checks of aerospace fastener documentation prior to product release or dispatch. Review Certificates of Conformity, test reports, material certification and supporting quality records for accuracy and completeness. Verify product traceability to approved manufacturers and/or suppliers. Check part numbers, quantities, batch/lot numbers, specifications, revisions and manufacturer details against purchase orders and customer requirements. Ensure documentation meets company procedures, customer requirements and applicable AS9120 controls. Identify missing, incorrect, inconsistent or potentially suspect documentation and prevent release until issues are resolved. Escalate documentation discrepancies, traceability concerns and suspected counterfeit or fraudulent certification to the Quality team. Raise or support nonconformance reports where documentation requirements have not been met. Maintain accurate records of completed documentation checks and approvals. Ensure documentation is controlled, legible, retrievable and retained in accordance with company requirements. Support the prevention of counterfeit or suspect unapproved parts through effective documentation and traceability verification. Identify and communicate recurring documentation issues and trends. Support corrective actions and continuous improvement initiatives relating to documentation accuracy. Work accurately and efficiently to agreed priorities without compromising quality or compliance. Exercise authority to place product or documentation on hold where conformity or traceability cannot be demonstrated. About you You will have experience in aerospace distribution, aerospace manufacturing, quality assurance, inspection, certification review or another highly regulated environment . You should also have experience reviewing Certificates of Conformity and product traceability documentation , with the confidence and judgement to challenge information where requirements have not been met.

Quality Inspectors 16.92 per hour Wolverhampton 6 - 2, 2 - 10, 2 shift rotating pattern Temporary role Quality Inspector My client are looking for 2 quality inspectors to work at their client on a 3 month contact. The ideal candidate will have transport for this role due to the training location. Duties of a quality inspector: Set up equipment on a daily basis Inspection of the production Working with templates Logging non conformities Attention to detail The ideal candidate will be familiar with Polyworks metrology suite or Zeiss quality solutions software and have a background or good understanding of metrology

Company description: Location: Aberdeen, Scotland, United Kingdom Job ID: 90201 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Join us as a Lift Engineers - Join Our Talent Pool in Aberdeen Join Our Engineering Talent Pool! Looking for your next engineering opportunity? Join our talent pool today and be the first to hear about roles that match your skills and experience. Once a suitable position becomes available, our recruitment team will be in touch to discuss the opportunity with you. Take the first step towards your next career move by applying today! Job description: Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, Expert+ etc) To rectify and reduce faults on lift equipment in cases of breakdown and check to confirm correct functioning Checking the lift function as part of maintenance, checks to include, speed, motor start/stop, weight, noise, temperature and power supplies using approved company issued tooling and protective equipment Conduct the routine inspection and adjustment of lift in accordance with approved procedures. Reinstate lift and complete service documentation Carrying out more advanced fault finding and diagnostic procedures using a range of techniques, technical manuals and appropriate test equipment, restoring equipment to service Conduct site surveys Profile description: Previous experience in lift servicing, maintenance or repairs is preferred NVQ Level 3 in Lift Maintenance (or an equivalent qualification) Strong electrical and mechanical knowledge, with experience working on multi-brand equipment Excellent fault-finding, diagnostic and problem-solving skills A full UK driving licence Ability to work under pressure, meet deadlines and maintain high standards of efficiency Confident working independently, with a flexible and proactive approach Strong communication skills, with the ability to build positive relationships with clients, Service Leaders and Inspectors Good manual dexterity, with the ability to safely use hands, arms and feet for repetitive tasks, operate hand and power tools, and complete written records We offer: Attractive Salary Company Van (for eligible roles) with a fuel card and parking expenses covered while you're on shift. 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts

Company description: Location: Greater Manchester, England, United Kingdom Job ID: 90199 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Join us as a Lift Engineers - Join Our Talent Pool in Greater Manchester Join Our Engineering Talent Pool! Looking for your next engineering opportunity? Join our talent pool today and be the first to hear about roles that match your skills and experience. Once a suitable position becomes available, our recruitment team will be in touch to discuss the opportunity with you. Take the first step towards your next career move by applying today! Job description: Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, Expert+ etc) To rectify and reduce faults on lift equipment in cases of breakdown and check to confirm correct functioning Checking the lift function as part of maintenance, checks to include, speed, motor start/stop, weight, noise, temperature and power supplies using approved company issued tooling and protective equipment Conduct the routine inspection and adjustment of lift in accordance with approved procedures. Reinstate lift and complete service documentation Carrying out more advanced fault finding and diagnostic procedures using a range of techniques, technical manuals and appropriate test equipment, restoring equipment to service. Conduct site surveys Profile description: Previous experience in lift servicing, maintenance or repairs is preferred NVQ Level 3 in Lift Maintenance (or an equivalent qualification) Strong electrical and mechanical knowledge, with experience working on multi-brand equipment Excellent fault-finding, diagnostic and problem-solving skills A full UK driving licence Ability to work under pressure, meet deadlines and maintain high standards of efficiency Confident working independently, with a flexible and proactive approach Strong communication skills, with the ability to build positive relationships with clients, Service Leaders and Inspectors Good manual dexterity, with the ability to safely use hands, arms and feet for repetitive tasks, operate hand and power tools, and complete written records We offer: Attractive Salary Company Van (for eligible roles) with a fuel card and parking expenses covered while you're on shift. 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts

Company description: Location: Edinburgh, Scotland, United Kingdom Job ID: 90203 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Join us as a Lift Engineers - Join Our Talent Pool in Scotland Join Our Engineering Talent Pool! Looking for your next engineering opportunity? Join our talent pool today and be the first to hear about roles that match your skills and experience. Once a suitable position becomes available, our recruitment team will be in touch to discuss the opportunity with you. Take the first step towards your next career move by applying today! Job description: Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, Expert+ etc) To rectify and reduce faults on lift equipment in cases of breakdown and check to confirm correct functioning Checking the lift function as part of maintenance, checks to include, speed, motor start/stop, weight, noise, temperature and power supplies using approved company issued tooling and protective equipment Conduct the routine inspection and adjustment of lift in accordance with approved procedures. Reinstate lift and complete service documentation Carrying out more advanced fault finding and diagnostic procedures using a range of techniques, technical manuals and appropriate test equipment, restoring equipment to service Conduct site survey Profile description: Previous experience in lift servicing, maintenance or repairs is preferred NVQ Level 3 in Lift Maintenance (or an equivalent qualification) Strong electrical and mechanical knowledge, with experience working on multi-brand equipment Excellent fault-finding, diagnostic and problem-solving skills A full UK driving licence Ability to work under pressure, meet deadlines and maintain high standards of efficiency Confident working independently, with a flexible and proactive approach Strong communication skills, with the ability to build positive relationships with clients, Service Leaders and Inspectors Good manual dexterity, with the ability to safely use hands, arms and feet for repetitive tasks, operate hand and power tools, and complete written records We offer: Attractive Salary Company Van (for eligible roles) with a fuel card and parking expenses covered while you're on shift. 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts

Join one of the UK's leading defence organisations, delivering advanced technologies that support the Armed Forces and help safeguard national security. As a trusted partner to the Ministry of Defence, we are seeking a Product Quality Non-Conformance Engineer to drive quality excellence, investigate product non-conformances, and support continuous improvement across complex engineering programmes. This is an opportunity to make a real impact within a collaborative, innovative, and high-performing environment. Key Responsibilities: Manage and administer product non-conformances, ensuring effective containment and resolution. Support manufacturing teams with frontline quality assurance and non-conformance management. Lead shop floor non-conformance reviews, escalating quality concerns as needed. Carry out operational surveillance to ensure compliance with manufacturing and quality standards. Monitor certification across manufacturing areas to maintain process adherence. Perform Gemba Walks and as-built verification checks to confirm product quality and compliance. What do you need?: Experienced Quality Inspector/Engineer with relevant work experience Working knowledge of SAP Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks What happens now? If your application meets the initial selection criteria, a member of our talent acquisition team will contact you via email to arrange a structured screening call. This conversation will explore your experience, technical background, and suitability for the role in more detail. Security Clearance : British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Quality Supervisor Location: Crewkerne, Somerset Job type : Permanent Hours: Monday to Wednesday 7:30am - 4:30pm, Thursday 7:30pm - 4pm & Friday 7:30pm - 1pm Salary : Up to £55,000 per annum, dependent on experience Are you an experienced Quality Supervisor looking for your next challenge? We are recruiting for our specialist manufacturing client in Chard to join their established production team at their Somerset factory. This is a key leadership position within a high-performing industrial environment, offering the opportunity to play a hands on role in quality, production support, team development and continuous improvement. Key responsibilities: Leading and supporting a team of quality inspectors, including workload planning, coaching and development Managing inspection activities including dimensional checks, visual inspection, and non-destructive testing methods Investigating quality issues, managing non-conformities, and implementing corrective and preventative actions Maintaining accurate quality documentation and records Supporting customer quality enquiries, complaints and investigations Monitor workflow, productivity and operational performance Supporting trials, process improvements, and new product introductions Ensuring alloy and material conformity through effective quality controls Training operators in inspection techniques, measurement equipment and quality procedures About you: Experience working within a manufacturing, engineering, casting, or foundry environment Previous experience supervising or leading a team A strong understanding of quality control processes and inspection methods Knowledge of manufacturing defects, root cause analysis, and corrective action processes Familiarity with problem solving tools such as 8D, 5 Why, Ishikawa or PDCA Understanding of quality standards and compliance requirements The ability to interpret technical information and work with production teams to resolve issues Closing date is 21/07/26 Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client. To Apply please follow the application process for the site this job is advertised on or email your CV. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Quality Inspector in Halesfield Hours Monday - Friday 10pm - 6am Pay 12.71 + 50 per weeks shift allowance ( bringing the pay to 13.96) Paid Break + Lunch provided Primary Function : Under the supervision of the Site Manager, the QC Technician ensures they supply and provide quality products to the correct specifications to all internal and external Customers whilst working within the Quality, Health & Safety and Environmental Management systems in place on site. Duties and Responsibilities : They follow the QC procedures in order to meet the product specifications which includes specific tests to be performed at specific time durations. They ensure that all Laboratory equipment is maintained in a good clean working state whilst ensuring that all housekeeping rules are respected in the Laboratory area. They follow all the health and safety practices in place. This includes following the LOTO procedure, ensuring all interlocks and guards on machinery are used and maintained in good working order They ensure that any faulty or broken machinery or equipment is reported in a timely manner via the correct procedure They attend a monthly meeting in the Laboratory with the Senior QC Technician in order that he is aware of actions and up to date with the business. Subjects include complaints, RFT - KPIs In the role they provide support and assistance to all departments - they communicate with all They accept and attend all proposed training sessions They follow all policies and procedures in place on site They provide back up for the QC Technician to cover raising work orders, checking raw material stocks, obtaining samples from other sites when needed. They ensure that all updated SDS are posted onto the Seirich database including all non-raw materials and any substances used in the Laboratory. They are able to use the Share Point system to obtain documentation, reports, QSE manuals, policies and procedures They propose any opportunities for improvement within the department They provide support and assistance to all departments Technical Skills & Training Knowledge and working practice in the plastics and master batch industry Previous quality inspection experience is essential Ability to work to tight deadlines and under pressure with supervision Organizational, multitasking and ability to prioritize IT and Communication skills Self-organization and attention to details Innovative - can think out of the box Solutions and results orientated Team Player Ethical Knowledge of how to control hazardous products and the impacts Ability to communicate health & safety risks to the site people This role is temporary - permanent for the right candidate. Long term employment with progression opportunities Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corporate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Friendly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.

Job Title: Chemical Process Operator Location: Basildon Hours: Mon-Thurs 7am-4pm / Fri 7.30am-12.30pm Pay: 14.02ph AMLR are looking for a Chemical Process Operator who are looking to join a leading aerospace manufacturer. This is an exciting opportunity to work within a precision engineering environment. Key responsibilities for Chemical Process Operator: Preparing and operating chemical processing equipment and tanks. Cleaning, degreasing, and etching metal components before treatment. Applying chemical conversion coatings, anodising, passivation, or other surface treatments. Monitoring chemical bath concentrations, temperatures, pH, and processing times. Recording process parameters and maintaining accurate production documentation. Inspecting treated parts for quality and compliance with engineering specifications. Following standard operating procedures (SOPs) and aerospace quality standards. Handling, storing, and disposing of hazardous chemicals safely. Performing routine maintenance on processing equipment. Working closely with quality inspectors, engineers, and production teams. Requirements for Requirements for Fettler/Polisher: Understanding of chemical handling and safety procedures. Ability to read engineering drawings and work instructions. Attention to detail and accuracy. Knowledge of measuring equipment and quality inspection techniques. Good record-keeping and documentation skills. Teamwork and communication. Awareness of health, safety, and environmental regulations. GCSEs (or equivalent) in Maths, English, and Science. A Level 2 or Level 3 qualification in engineering, manufacturing, or chemical processing (beneficial). Experience in manufacturing, aerospace, automotive, or metal finishing. Training in hazardous chemical handling and workplace safety. If you are proactive, quality-driven, and ready to take the next step in your career, apply now or submit your most up-to-date CV to j . uk or to discuss how we can find you your next move within your chosen sector with one of the many career opportunities we currently have, Tel: (phone number removed) and ask for Jane

Goods In Inspector Aylesbury Salary Dependent on Experience Our client is a well-established industry leader, currently seeking a Goods in Inspector to join their expanding team. This is a fantastic opportunity to become part of a growing organisation that values quality, precision, and continuous improvement Goods In Inspector Roles and Responsibilities: Conduct goods-in inspections and support general stores activities in line with company policies and procedures Operate in accordance with the internal Quality Management System (QMS) Perform final inspections and pack a range of equipment and materials Accurately complete and sign work tickets and relevant quality assurance documentation Inspect and book in raw materials and goods using the internal ERP system Support the achievement of business objectives and performance targets Maintain strict confidentiality regarding all company matters Ensure full compliance with company procedures at all times Consistently demonstrate and uphold company values and culture Goods In Inspector Ideal Candidate: Minimum of 2 years' experience within a manufacturing environment Strong organisational skills with the ability to plan and prioritise workload effectively Experience using Microsoft Office, including Excel, Word and Email. Familiarity with ERP systems. Experience maintaining systems and following structured procedures Proven ability to build strong working relationships, both internally and externally Excellent communication skills, both written and verbal Focused, results-driven, with a clear commitment to achieving objectives Goods In Inspector Working Hours and Benefits: Monday to Wednesday 13:30 - 11:30, Thursday 13:30 - 11:00 25 days holiday + bank holidays Life assurance Pension Health cash plan On-site parking On-site electric charging points Social events Seasonal flu jabs On-site electric charging points Jackie Kerr Recruitment is an independent agency that has been established for 28 years. We strive to provide the ultimate consultancy service to all our candidates. Whether you are looking for permanent or temporary work we pride ourselves in understanding our candidate's requirements to ensure that we place you in your ideal role. We have recently heavily invested in new Recruitment Software that provides an online portal. Simply visit jackiekerrrecruitment. com to enter your details and you will receive job alerts, hot off the press. The portal enables you to update your information and CV at any time, so we always have your latest employment details on record. So please visit our website and let us help you to find your dream job! Please note: At Jackie Kerr Recruitment we receive a huge number of applications for each job that is posted. If you do not hear from us within 2 weeks of your original application, please go to our website jackiekerrrecruitment. com to apply for other jobs that may be suitable to you.

Are you a detail-driven Quality Inspector looking for a company that truly values your skills and invests in your development?As a Visual Inspector , you'll play a vital role in ensuring product conformity throughout the build process and at final inspection . You'll inspect materials , components , and assemblies at various stages , ensuring they meet the highest standards of quality , safety, and compliance . Quality Inspector Permanent Up to 38,000 DOE Mon-Thurs 8:00-17:00, Fri 8:00-12:00 (Flexi Working) Fareham Quality Inspector Job Description Carrying out dimensional inspections on in-house and outsourced parts/assemblies Working to inspection criteria, engineering drawings, standards, and purchase orders Using measurement tools, gauges, fixtures, and microscopes/digital microscopes Review and verify supporting documentation, including certificates of conformity, inspection records, material traceability documents, and any customer-required paperwork. Check stock for containment of quality issues and identify non-conforming materials. Quality Inspector Essential Experience/Skills/Qualifications Experience in component inspection- 1-2 years + Ability to read and understand engineering drawings Experience using a range of inspection tools i.e callipers, microscopes, verniers, gauges, micrometres etc. Experience working in a fast-paced manufacturing environment Quality Inspector Company Benefits 22.5 days holiday + bank holidays Flexi Working hours Employee Cash plan Online discount perks Cycle to Work Social Club Onsite Gym If you feel you're a good fit for this position, please click 'apply'

Job Title: Quality Inspector Location: Stourbridge Salary: 13 - 17.32 per hour Shift Patterns: 05:00am - 15:00pm Monday - Friday We're looking for a Quality Inspector who takes pride in getting things right. In this role, you'll be responsible for visually inspecting manufactured parts for imperfections, defects, and deviations from quality standards. You'll be working in a fast-paced production environment where a sharp eye, a steady hand, and a commitment to excellence are essential. This is not just a tick-box role - we want someone who genuinely cares about quality, who understands that every detail matters, and who's not afraid to put in the work to make sure our products leave the line at the highest possible standard. What you'll be doing: Conduct detailed visual inspections of parts for surface imperfections, damage, or non-conformities Follow set inspection processes and quality standards accurately. Record findings and report defects clearly and promptly. Work closely with the production team to flag and prevent recurring issues. FLT Driving. What we are looking for: Previous experience in a similar Quality Inspector or visual inspection role and manufacturing experience is a must. A keen eye for detail, you'll be spotting things others might miss. Someone who genuinely cares about doing a good job not just turning up, but turning out great work. Strong work ethic, reliable, committed, and willing to go the extra mile when needed. Someone physically fit and able to lift heavy loads. FLT experience. Do you fit the bill? Apply today! Oliver Rae is an Established Recruitment Business with offices based in Walsall and Halesowen. We supply Temporary and Permanent Staffing to a range of sectors. INDTEMP

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role sits within our Saab Seaeye Business Unit. The Quality Control Inspector plays a key role in ensuring product both received and delivered meet the required quality standards. The role involves detailed checks, documentation, liaising with suppliers, and managing non-conformances to maintain product integrity and supply chain efficiency. Key Responsibilities: Performing dimensional checks, visual inspections, and using measuring equipment to verify parts. Checking deliveries against paperwork (packing lists, purchase orders) for accuracy in quantity and items. Creating and maintaining detailed inspection records, test reports, and audit trails. Identifying defects, quarantining non-compliant items, and initiating corrective actions Working with production, engineering, and supply chain teams to resolve issues and improve processes To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day to day activities and procedures within the specified role. To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role. To act ethically, with integrity and in the best interest of the business at all times. To maintain a professional and supportive relationship with team members and other departments in order to deliver business objectives or deadlines. To carry out any other duties as detailed by a member of the management team or authorized representative. To ensure that the working area is a clean and safe environment in compliance with our Health and Safety policies. Skills and Experience: Proven experience of working in a Quality Mechanical Inspector role. Significant previous experience of working in a manufacturing environment using mechanical measuring equipment. Familiar with FAIR's and or PPAP. Proven ability to use a wide range of hand measuring tools and other inspection equipment including a CNC CMM. Previous experience of producing accurate and detailed comprehensive written reports on non-conforming product. Microsoft Office skills, including the creation of Excel spreadsheets. Able to interpret engineering drawings and specifications. Fluent in English. Good presentation and communication skills at all levels, both externally and internally. Literate and numerical aptitude. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Quality Inspector We are looking for two experienced Aerospace Quality Inspectors to support a a project on-site at a customers facility in South Somerset. The role for the Quality Inspector will involve visual, manual, Faro and CMM inspection of manufactured components and assemblies. You will need strong mechanical inspection skills, the ability to work from engineering drawings and with the abili click apply for full job details

Automotive Quality InspectorLocation: Solihull Pay rate varies based on shift. Morning shift()-£12.71Afternoon Shift()-£12.71Night Shift()-£15.89 Automotive Quality Inspectors - Solihull Join a global leader in automotive quality support We're hiring on behalf of our client, a worldwide service provider to the automotive and component supply industry. They're known for delivering top-quality support and are now looking for experienced Automotive Quality Inspectors to join their team in the West Midlands . The Role As an Automotive Quality Inspector , your job will be to check that automotive parts meet the right quality standards. You'll inspect components, spot any issues or defects, and work with other teams to fix problems quickly and efficiently. This includes both visual and more technical checks with occasional use of power tools. What You'll Be Doing Inspect automotive parts and components to make sure they meet quality standards Spot and record any defects or problems Work with production and quality teams to fix any issues Keep accurate records and share your findings with the team What We're Looking For Experience in quality inspection, especially in the automotive industry, is a big plus Great attention to detail - you notice things others might miss Good communication and teamwork skills Able to work in a busy environment and meet tight deadlines Flexible for any shift preferably What You'll Get A friendly, supportive team that values new ideas Chances to grow your career and learn new skills Be part of a global company at the heart of the automotive industry How to Apply If you're a reliable and skilled Automotive Quality Inspector looking for your next opportunity, we'd love to hear from you.Click the APPLY button to send your application.

Quality Inspector - CMM £40,000+ Bonus Scheme Flexible Working Hours Increased Pension A successful manufacturing business supplying complex products into highly regulated industries is currently seeking a Quality Inspector to join its established Quality team. This is an excellent opportunity to join a well-established company investing in new projects, quality systems and continuous improvement activities. The successful professional will be responsible for dimensional inspection and CMM programming, supporting both existing production and the introduction of new products. Quality Inspector duties include - Inspect production and NPI components using contact and optical CMM equipment. Create and modify CMM programs using PC-DMIS. Complete dimensional, PPAP and annual layout inspections. Interpret engineering drawings, technical specifications and GD&T requirements. Support MSA activities and analyse measurement data to identify improvements. Assist with calibration and control of measurement equipment. Desirable skills and experience for the Quality Inspector role - Experience within a Quality Inspector, CMM Operator, CMM Programmer, or similar position. Strong understanding of engineering drawings and GD&T. Experience working within a metrology or precision manufacturing environment. Knowledge of MSA, SPC and Automotive Core Tools would be advantageous. Quality Inspector benefits include - Salary of £40,000+. Bonus scheme. Flexible working hours. Pension scheme. Stable and growing manufacturing business. Career development opportunities. If you are interested in this Quality Inspector position, please apply through this advert immediately. ASC Connections Ltd acts as an employment business for temporary positions and an employment agency for permanent positions. We are committed to equal opportunity and diversity.

Goods In Inspector Location: Fareham Department: Stores / Goods Inward Reports to: Operations Manager / Goods In Supervisor Job Type: Full-Time, Permanent About Percival Aviation Percival Aviation designs and manufactures high-quality aircraft interior products for the aerospace industry. We are committed to delivering products that meet the highest standards of quality, safety, and regulatory compliance across the aviation supply chain. Role Purpose The Goods In Inspector is responsible for inspecting all incoming materials, components, and sub-contracted items to ensure they meet specified quantity, quality, and certification requirements before release into production or stores. This role is a critical control point in maintaining product conformity and traceability throughout the supply chain. Key Responsibilities: Inspect all incoming goods, raw materials, components, and sub-contracted parts against purchase orders, drawings, and specifications. Verify quantities received match delivery notes and purchase order documentation. Check dimensional and visual quality of incoming items using appropriate measuring equipment (callipers, micrometers, gauges, etc.). Review and verify supplier certification, including Certificates of Conformity (CofC), material certificates, and EASA Form 1 / FAA 8130-3 where applicable. Identify and quarantine non-conforming products, raising Non-Conformance Reports (NCRs) as required. Liaise with Procurement and Quality departments regarding supplier issues, discrepancies, or rejected goods. Ensure correct labelling, storage, and handling of inspected goods prior to release. Adhere to company health and safety, 5S, and quality management procedures at all times. Essential Skills and Experience: Previous experience in a Goods In, Quality Inspection, or Incoming Inspection role, ideally within aerospace, automotive, or another regulated manufacturing environment. Strong understanding of quality documentation, including CofC, material certs, and inspection reports. Competent in the use of measuring and inspection equipment. Ability to read and interpret engineering drawings and technical specifications. High attention to detail and a methodical approach to work. Good written and verbal communication skills. Basic IT skills (ERP/MRP systems, Microsoft Office). Desirable: Experience working to AS9100 / AS9120 quality standards. Familiarity with EASA Part 21G / Part 145 requirements. Experience with aerospace-specific certification (EASA Form 1, FAA 8130-3, CAA equivalents). Previous experience in an aircraft interiors or aerospace manufacturing environment. Personal Attributes: Conscientious and quality-focused mindset. Reliable and able to work independently. Strong organisational skills with the ability to manage multiple deliveries / priorities. Team player who works well cross-functionally with Procurement, Production, and Quality. What We Offer: Competitive salary (dependent on experience) Pension scheme 23 days holiday (increasing to 25 after 3 years continuous service) On-site parking Opportunities for training and development within a growing aerospace business

We are looking for an Inspector for our leading Formula One client on an initial 3 month contract in their cutting-edge manufacturing facility. Experience with PCDmis or Polyworks software is beneficial, and they are looking for people on a number of shifts that include weekend and weekend nights. Key Responsibilities Perform Quality Assurance and Quality Control inspections on precision machine click apply for full job details

Job Description Inspector Full Time/ Overlay working (7 Day) shift pattern Derby - office based Why join Rolls-Royce? At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting, and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. What you will be doing: An exciting opportunity has arisen for an Inspector to join us at the Engine Overhaul Services facility in Derby. The EOS facility is 35,000m2, with circa 650 employees, and operational for 20 hours a day, 365 days a year. As the only wholly owned Large Engine MRO facility, with capability to maintain all modern Trent engines, EOS is fundamental to the future success of our Civil Aerospace business. In this role, you will carry out a range of inspection activities from a Maintenance, Repair and Overhaul (MRO) perspective, including CMM measurement, replicast measurement, Module build inspection checks/final inspection, visual and dimensional inspection of group A components and EASA Form 1 issuing. Responsibilities: You will carry out inspection of a range of aerospace engine components and you will: Interpret repair documentation, engine repair manuals and written specifications around project requirements into a product/ test specimen. Resolve production and development issues by working collaboratively with the team and undertake other activities when production work is not required. Be an integral part of our Module Inspection strip and build department and enable Rolls-Royce to maintain our excellent quality standards and deliver repair capability to a global network. Who we're looking for: Being a part of Rolls-Royce you'll know we put safety first, do the right thing, keep it simple and make a difference. These principles form our behaviours. They are an essential component of our assessment process and are fundamental qualities that we seek for all roles. Completed an advanced level engineering apprenticeship and an NVQ/SVQ/City & Guilds Level 3 or equivalent. Previous Inspection experience preferred but not required To support your application please attach a copy of your certificates as proof of completing a recognised apprenticeship together with your CV. Experience of component inspection with ability to understand engineering drawings, repair documentation and manuals. Experience with operating/programming CMM would be advantageous but not essential. A self-starter, with a professional, flexible approach, ability to work on own initiative with great teamwork and effective communicator. Capable of maintaining a clean and safe environment, acknowledging all HSE (health, safety, and environment) and COSHH factors. Able to work to deadlines to achieve performance and project targets. Regional Benefits Generous Annual Leave Retirement Savings through the Rolls-Royce Retirement Savings Trust Group Life Assurance provides for a lump sum benefit if you die whilst employed by Rolls-Royce Group Income Protection provides an income in the event that you are unable to work due to illness or injury Your Shares: Matched is a simple way to own Rolls-Royce shares and invest in our future, together. Buy one share, get one free! Rolls-Royce Your Shares: Matched Digital GP provides a convenient way for you to access GP consultations Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient, and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Factory Staff Posting Date 12 Aug 2026; 00:08 Posting End Date 25 Aug 2026PandoLogic. , Location: Derby, ENG - DE23 8YH