Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire Rate: 40-45 per hour inside IR35 The Customer Quality Assurance Engineer is a specialised role created to function as a link between the businesses program and manufacturing functions and the customer, making sure engineering design and production standards meet safety, regulatory (EASA, CAA) and customer requirements focusing on risk mitigation and process compliance. The Engineer is responsible for handling customer non-conformances and acting as a primary quality liaison between the business and customer supporting design assurance oversight in line with Part 21J and production oversight in line with Part 21G airworthiness requirements. You will champion contacts with the customer, production, engineering, configuration and support functions focusing on defect prevention, root cause analysis and continuous improvement using APQP tools as PPAP, FMEA, MSA and SPC. Principal accountabilities Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented. Effective interaction with the customer/s for quality escapes and request for customer approvals in conjunction with design & program's needs. Site champion, facilitating and supporting root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures. Ensure all design, design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements when working with Part 21G organisation. Support design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design. Technical documentation reviewed and validated to confirm design performance. Support APQP process to deliver robust manufacturing techniques for Part 21G organisation and robust deployment of MSA. Supporting DFMEA/ PFMEA, for industrialisation improvements and Part 21G organisation performance. Internal/ external FAIRs/PPAPs compiled and/ or approved where required with status reported. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. 3 to 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Knowledge of ISO9001, AS9100 QMS standards deployment and implementation. Understanding of EASA/ CAA part 21J and Part 21G Experience in internal and external audit and auditing techniques, lead auditor trained preferred. APQP Tools knowledge with proficiency demonstrated working with PPAP, FMEA and MSA. Problem solving proficiency including 8D, RCCA, FRACA with Six Sigma DMAIC principles and Green or Black being desired. Configuration and data management experience. To apply send your CV today and we'll set up a call to discuss!
Aug 10, 2026
Contractor
Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire Rate: 40-45 per hour inside IR35 The Customer Quality Assurance Engineer is a specialised role created to function as a link between the businesses program and manufacturing functions and the customer, making sure engineering design and production standards meet safety, regulatory (EASA, CAA) and customer requirements focusing on risk mitigation and process compliance. The Engineer is responsible for handling customer non-conformances and acting as a primary quality liaison between the business and customer supporting design assurance oversight in line with Part 21J and production oversight in line with Part 21G airworthiness requirements. You will champion contacts with the customer, production, engineering, configuration and support functions focusing on defect prevention, root cause analysis and continuous improvement using APQP tools as PPAP, FMEA, MSA and SPC. Principal accountabilities Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented. Effective interaction with the customer/s for quality escapes and request for customer approvals in conjunction with design & program's needs. Site champion, facilitating and supporting root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures. Ensure all design, design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements when working with Part 21G organisation. Support design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design. Technical documentation reviewed and validated to confirm design performance. Support APQP process to deliver robust manufacturing techniques for Part 21G organisation and robust deployment of MSA. Supporting DFMEA/ PFMEA, for industrialisation improvements and Part 21G organisation performance. Internal/ external FAIRs/PPAPs compiled and/ or approved where required with status reported. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. 3 to 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Knowledge of ISO9001, AS9100 QMS standards deployment and implementation. Understanding of EASA/ CAA part 21J and Part 21G Experience in internal and external audit and auditing techniques, lead auditor trained preferred. APQP Tools knowledge with proficiency demonstrated working with PPAP, FMEA and MSA. Problem solving proficiency including 8D, RCCA, FRACA with Six Sigma DMAIC principles and Green or Black being desired. Configuration and data management experience. To apply send your CV today and we'll set up a call to discuss!
Lead Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire 50.00 - 55.00 per hour inside IR35 The Lead Customer Quality Assurance Engineer is a specialised role created to function as a link between the customers, to ensure engineering design and production standards meet customer, safety, and regulatory (EASA, CAA) standards focusing on risk mitigation and process compliance. The Lead engineer is a senior role responsible for implementation and oversight of the customer support program bridging the gap between 21G production organisation and the consumer overseeing complaints, investigation requests and continuous improvement in accordance with airworthiness requirements. You will be the business specialist, familiar with the customers contract requirements leading program teams to contract expectations fulfilment by following established business processes. Lead CQAE will develop KPIs and agree with stakeholders internally and with the customers. KPI will be used to identify improvement projects to deliver more effective contract fulfilment. You will represent customer interests on site when supporting programs and production. Lead CQAE will champion defect prevention, root cause analysis and continuous improvement using APQP tools as PPAP, FMEA, MSA and SPC. Principal accountabilities Strategy definition and KPI reporting for all the customers Site champion, facilitating and supporting root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures in support of the customer. Ensure all design, design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements when working with Part 21G organisation. Support design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design. Production organisation defect analysis supported with RCA implemented for effective customer feedback. APQP process champion enabling manufacturing techniques for Part 21G organisation and robust deployment of MSA. Strategy for APQP tools deployed for NPI created and deployed. Supporting DFMEA/ PFMEA, for industrialisation improvements and Part 21G organisation performance. Internal/ external FAIRs/PPAPs compiled and/ or approved where required with status reported. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. 5-8 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Problem solving proficiency including 8D, RCCA, FRACA with Six Sigma DMAIC principles and Green or Black being desired. APQP Tools knowledge with proficiency demonstrated working with PPAP, FMEA and MSA. Knowledge of ISO9001, AS9100 QMS standards deployment and implementation. Understanding of EASA/ CAA part 21J and Part 21G Experience in internal and external audit and auditing techniques, lead auditor trained preferred. If you'd like to apply send your CV and we can set up a call to discuss!
Aug 10, 2026
Contractor
Lead Customer Quality Assurance Engineer 12 months Pitstone, Hertfordshire 50.00 - 55.00 per hour inside IR35 The Lead Customer Quality Assurance Engineer is a specialised role created to function as a link between the customers, to ensure engineering design and production standards meet customer, safety, and regulatory (EASA, CAA) standards focusing on risk mitigation and process compliance. The Lead engineer is a senior role responsible for implementation and oversight of the customer support program bridging the gap between 21G production organisation and the consumer overseeing complaints, investigation requests and continuous improvement in accordance with airworthiness requirements. You will be the business specialist, familiar with the customers contract requirements leading program teams to contract expectations fulfilment by following established business processes. Lead CQAE will develop KPIs and agree with stakeholders internally and with the customers. KPI will be used to identify improvement projects to deliver more effective contract fulfilment. You will represent customer interests on site when supporting programs and production. Lead CQAE will champion defect prevention, root cause analysis and continuous improvement using APQP tools as PPAP, FMEA, MSA and SPC. Principal accountabilities Strategy definition and KPI reporting for all the customers Site champion, facilitating and supporting root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures in support of the customer. Ensure all design, design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements when working with Part 21G organisation. Support design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design. Production organisation defect analysis supported with RCA implemented for effective customer feedback. APQP process champion enabling manufacturing techniques for Part 21G organisation and robust deployment of MSA. Strategy for APQP tools deployed for NPI created and deployed. Supporting DFMEA/ PFMEA, for industrialisation improvements and Part 21G organisation performance. Internal/ external FAIRs/PPAPs compiled and/ or approved where required with status reported. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. 5-8 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Problem solving proficiency including 8D, RCCA, FRACA with Six Sigma DMAIC principles and Green or Black being desired. APQP Tools knowledge with proficiency demonstrated working with PPAP, FMEA and MSA. Knowledge of ISO9001, AS9100 QMS standards deployment and implementation. Understanding of EASA/ CAA part 21J and Part 21G Experience in internal and external audit and auditing techniques, lead auditor trained preferred. If you'd like to apply send your CV and we can set up a call to discuss!
Lead Design Quality Engineer Pitstone, Hertfordshire Inside IR35 12 months You will ensure that engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences focusing on risk mitigation and process compliance and engages effectively with all involved regulatory bodies. Lead engineer is a senior role responsible for planning and delivery of design assurance oversight in line with Part 21J airworthiness requirements and Design Organization Handbook (DOH) requirements applicable to the customer products, responsible for achieving 100% compliance with airworthiness. You will engage with heads of production, engineering, configuration and support functions defining strategy for defect prevention, root cause analysis and continuous improvement across the full product development lifecycle. Principal accountabilities Strategy definition and KPI reporting for all the customers on shared product platform. Plan created to measure how design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements and communicate KPI. Leading design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design and decide additional resource where required. Leading Technical documentation reviewed and validated to confirm design performance. Leading and facilitating root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures. Strategy for APQP tools deployed for NPI created and deployed. Leading DFMEA/ PFMEA, Quality champion during DEV process stages for FMEA update. Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented. Audit design methodologies and software tools to ensure conformity to AS9100. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. Min 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Proficiency in ISO9001, AS9100 QMS standards deployment and implementation. Previous experience working with EASA/ CAA part 21J. Experience in internal and external audit and auditing techniques, lead auditor trained preferred. APQP Specialist with demonstrated proficiency in PPAP, FMEA and MSA. Problem solving proficient.8D, RCCA, FRACA with Six Sigma DMAIC Black Belt being desired. Configuration and data management experience. Ability to interpret and explain engineering drawings, CAD models and technical specifications. To apply send your CV to Stella today!
Aug 10, 2026
Contractor
Lead Design Quality Engineer Pitstone, Hertfordshire Inside IR35 12 months You will ensure that engineering designs meet safety, regulatory (EASA, CAA) and customer requirements before production commences focusing on risk mitigation and process compliance and engages effectively with all involved regulatory bodies. Lead engineer is a senior role responsible for planning and delivery of design assurance oversight in line with Part 21J airworthiness requirements and Design Organization Handbook (DOH) requirements applicable to the customer products, responsible for achieving 100% compliance with airworthiness. You will engage with heads of production, engineering, configuration and support functions defining strategy for defect prevention, root cause analysis and continuous improvement across the full product development lifecycle. Principal accountabilities Strategy definition and KPI reporting for all the customers on shared product platform. Plan created to measure how design change and technical documentation for product continued airworthiness meet EASA/ CAA Part 21J airworthiness and customer requirements and communicate KPI. Leading design reviews PDR/ CDR and all stages of DEV program to integrate quality, safety and producibility into initial design and decide additional resource where required. Leading Technical documentation reviewed and validated to confirm design performance. Leading and facilitating root cause corrective actions (RCCA), failure reporting and corrective actions (FRACA) analysis & practical problem-solving activities with corrective action sustainment monitoring in place to prevent in service failures. Strategy for APQP tools deployed for NPI created and deployed. Leading DFMEA/ PFMEA, Quality champion during DEV process stages for FMEA update. Customer, EASA, CAA, ISO9001 and AS9100 requirements and audits supported with NCR closeout oversight and follow on sessions implemented. Audit design methodologies and software tools to ensure conformity to AS9100. Requirements Bachelor's degree in aerospace, science, or engineering highly desirable. Min 5 years' experience in aerospace industry or equivalent at engineering, design & development, or quality positions. Proficiency in ISO9001, AS9100 QMS standards deployment and implementation. Previous experience working with EASA/ CAA part 21J. Experience in internal and external audit and auditing techniques, lead auditor trained preferred. APQP Specialist with demonstrated proficiency in PPAP, FMEA and MSA. Problem solving proficient.8D, RCCA, FRACA with Six Sigma DMAIC Black Belt being desired. Configuration and data management experience. Ability to interpret and explain engineering drawings, CAD models and technical specifications. To apply send your CV to Stella today!
Performance & Dynamics Engineer 6 months 45.00 - 50.00 per hour inside IR35 Gloucester - onsite We are looking to recruit Performance & Dynamics Engineer to work on major programmes within the Systems Engineering team by building computational models and running simulations. You will be delivering performance and dynamic analysis for the mechanical, hydraulic and occasionally basic electrical systems as they relate to the operation of aircraft, landing gear, shock absorption, extension/retraction and steering. You will be able to understand and derive requirements and how these impact the validation and verification of the product utilising standardised methods and tools. Possessing good knowledge of mechanical and hydraulic system products, you will help guide product development to ensure the performance and dynamics of the integrated system meet the program requirements. Key aspects of this job include the following: Build computational models and run simulations Calculate static and dynamic loads Conduct performance and frequency response analyses Conduct stability, shimmy, modal analysis and failure case analyses Correlate and validate computational models Write and validate performance and dynamics requirements Define and document simulation cases and pass/fail criteria Optimise design solutions in conjunction with other engineering disciplines Define test requirements and analyse and interpret test results Adherence to the programme schedules Requirements Multi-body dynamic modelling and simulation Landing gear extension/retraction analysis Shock absorber performance analysis Recoil analysis Shimmy and stability analysis System loads generation Model Integration Working knowledge of MATLAB/Simulink, MSC ADAMS, MSC EASY5 and AMESim Desirable: Knowledge of nose-wheel steering analysis, vibration analysis, electrical systems engineering, airworthiness requirements and aircraft systems certification Experience on requirements management and DOORS DBS clearance required Candidates with a Stress and/or Simulation Engineering background are welcomed to apply.
Aug 10, 2026
Contractor
Performance & Dynamics Engineer 6 months 45.00 - 50.00 per hour inside IR35 Gloucester - onsite We are looking to recruit Performance & Dynamics Engineer to work on major programmes within the Systems Engineering team by building computational models and running simulations. You will be delivering performance and dynamic analysis for the mechanical, hydraulic and occasionally basic electrical systems as they relate to the operation of aircraft, landing gear, shock absorption, extension/retraction and steering. You will be able to understand and derive requirements and how these impact the validation and verification of the product utilising standardised methods and tools. Possessing good knowledge of mechanical and hydraulic system products, you will help guide product development to ensure the performance and dynamics of the integrated system meet the program requirements. Key aspects of this job include the following: Build computational models and run simulations Calculate static and dynamic loads Conduct performance and frequency response analyses Conduct stability, shimmy, modal analysis and failure case analyses Correlate and validate computational models Write and validate performance and dynamics requirements Define and document simulation cases and pass/fail criteria Optimise design solutions in conjunction with other engineering disciplines Define test requirements and analyse and interpret test results Adherence to the programme schedules Requirements Multi-body dynamic modelling and simulation Landing gear extension/retraction analysis Shock absorber performance analysis Recoil analysis Shimmy and stability analysis System loads generation Model Integration Working knowledge of MATLAB/Simulink, MSC ADAMS, MSC EASY5 and AMESim Desirable: Knowledge of nose-wheel steering analysis, vibration analysis, electrical systems engineering, airworthiness requirements and aircraft systems certification Experience on requirements management and DOORS DBS clearance required Candidates with a Stress and/or Simulation Engineering background are welcomed to apply.
Job Title: Senior or Principal Airworthiness Consultant Location: Fully Remote (UK-Wide) Salary: Senior: 55,000 - 70,000 OR Principal: 70,000 - 85,000 Job Type: Full-Time Reports To: Head of Airworthiness & Certification Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). UK Citizenship Required Are you an Airworthiness Consultant looking for a Senior or Principal level position that offers a fully remote opportunity with a thriving UK engineering Safety and Airworthiness consultancy? We are a busy, growing, and highly successful consultancy seeking an experienced Senior or Principal Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Technical Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leadership Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Management Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Aug 10, 2026
Full time
Job Title: Senior or Principal Airworthiness Consultant Location: Fully Remote (UK-Wide) Salary: Senior: 55,000 - 70,000 OR Principal: 70,000 - 85,000 Job Type: Full-Time Reports To: Head of Airworthiness & Certification Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). UK Citizenship Required Are you an Airworthiness Consultant looking for a Senior or Principal level position that offers a fully remote opportunity with a thriving UK engineering Safety and Airworthiness consultancy? We are a busy, growing, and highly successful consultancy seeking an experienced Senior or Principal Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Technical Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leadership Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Management Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Mechanical Supervisor Location: RAF Valley, Isle of Anglesey Contract Type: Permanent Role ID: SF66156 Hours: 36 hours per week Shift Pattern: Monday Friday, 06 45 Salary & Benefits £34,703.20 per annum + £3,978 shift allowance Permanent opportunity within a highly specialised military aviation environment Overview An exciting opportunity is available for an experienced Mechanical Supervisor to support aircraft maintenance operations at RAF Valley. This is an excellent opportunity for an aviation professional to take on a leadership role within a fast-paced, safety-critical military aviation environment. The successful candidate will supervise aircraft maintenance activities, ensuring high standards of safety, airworthiness, reliability, and operational performance are maintained at all times. The role will involve providing technical leadership, overseeing maintenance delivery, and supporting the ongoing development and competency of the wider engineering team. Key Responsibilities Supervise aircraft maintenance activities within a regulated aviation environment Review operational performance of aircraft systems and components Analyse and diagnose faults across aircraft and associated systems Support repairs, modifications, and maintenance improvements using technical expertise Ensure maintenance schedules and operational targets are achieved Resolve maintenance issues and escalate where required Maintain personal and team competencies for aircraft and component maintenance activities Ensure all work is carried out safely and in accordance with regulatory and company procedures Promote high standards of workmanship, safety, and compliance Demonstrate flexibility and a proactive approach to operational requirements Essential Skills & Experience Previous supervisory or leadership experience within an aircraft maintenance environment Fully qualified technician with relevant maintenance authorities and certifications Strong aircraft maintenance and fault diagnostic capability Broad aviation maintenance experience supported by current and recent logbook evidence Strong understanding of aviation safety standards and safe systems of work Ability to work effectively within a safety-critical operational environment Strong communication and team leadership skills Eligible to obtain and maintain BPSS and SC Security Clearance Qualifications Completion of a recognised Engineering Apprenticeship, ideally in Aeronautical Engineering or military equivalent City & Guilds 2675 or 2661 in Aeronautical Engineering & Maintenance, or equivalent qualification Strong technical background supported by structured training and practical experience Working Environment Based at RAF Valley, Isle of Anglesey Military aviation maintenance environment Structured team supporting operational aircraft maintenance activities Opportunity to work within a highly skilled engineering and supervisory team This is a fantastic opportunity for an experienced aviation professional to step into a supervisory position supporting critical aircraft maintenance operations within a respected military aviation programme. Please send a CV to (url removed) or apply directly!
Aug 08, 2026
Full time
Mechanical Supervisor Location: RAF Valley, Isle of Anglesey Contract Type: Permanent Role ID: SF66156 Hours: 36 hours per week Shift Pattern: Monday Friday, 06 45 Salary & Benefits £34,703.20 per annum + £3,978 shift allowance Permanent opportunity within a highly specialised military aviation environment Overview An exciting opportunity is available for an experienced Mechanical Supervisor to support aircraft maintenance operations at RAF Valley. This is an excellent opportunity for an aviation professional to take on a leadership role within a fast-paced, safety-critical military aviation environment. The successful candidate will supervise aircraft maintenance activities, ensuring high standards of safety, airworthiness, reliability, and operational performance are maintained at all times. The role will involve providing technical leadership, overseeing maintenance delivery, and supporting the ongoing development and competency of the wider engineering team. Key Responsibilities Supervise aircraft maintenance activities within a regulated aviation environment Review operational performance of aircraft systems and components Analyse and diagnose faults across aircraft and associated systems Support repairs, modifications, and maintenance improvements using technical expertise Ensure maintenance schedules and operational targets are achieved Resolve maintenance issues and escalate where required Maintain personal and team competencies for aircraft and component maintenance activities Ensure all work is carried out safely and in accordance with regulatory and company procedures Promote high standards of workmanship, safety, and compliance Demonstrate flexibility and a proactive approach to operational requirements Essential Skills & Experience Previous supervisory or leadership experience within an aircraft maintenance environment Fully qualified technician with relevant maintenance authorities and certifications Strong aircraft maintenance and fault diagnostic capability Broad aviation maintenance experience supported by current and recent logbook evidence Strong understanding of aviation safety standards and safe systems of work Ability to work effectively within a safety-critical operational environment Strong communication and team leadership skills Eligible to obtain and maintain BPSS and SC Security Clearance Qualifications Completion of a recognised Engineering Apprenticeship, ideally in Aeronautical Engineering or military equivalent City & Guilds 2675 or 2661 in Aeronautical Engineering & Maintenance, or equivalent qualification Strong technical background supported by structured training and practical experience Working Environment Based at RAF Valley, Isle of Anglesey Military aviation maintenance environment Structured team supporting operational aircraft maintenance activities Opportunity to work within a highly skilled engineering and supervisory team This is a fantastic opportunity for an experienced aviation professional to step into a supervisory position supporting critical aircraft maintenance operations within a respected military aviation programme. Please send a CV to (url removed) or apply directly!
Job Title: Systems Engineer - Flight Test & Evaluation Location: Coningsby, Lincolnshire Salary: DOE The Role We are seeking a Systems Engineer to provide critical systems and operational analysis in support of the design, evaluation, and assurance of Typhoon mission systems for the RAF. Embedded within 41 Test and Evaluation Squadron (TES), you will lead integration and analysis activities, develop and assure software tools, support flight test programmes, and provide subject matter expertise to ensure safe and effective capability development. You will work at the intersection of systems engineering, software, and flight test analysis, making an immediate impact on the operational performance and safety of Typhoon capabilities. Key Responsibilities Provide subject matter expertise on Typhoon mission and avionics systems. Lead systems integration and flight test analysis activities. Apply verification and validation techniques to support airworthiness and operational safety. Define and support test plans and operational analysis activities. Supervise, mentor, and guide junior engineers within the analysis team. Develop, maintain, and assure software tools for engineering analysis and reporting. Essential Experience Proven track record in delivering technical analysis and problem solving across the engineering lifecycle. Strong software skills for engineering applications (Python, MATLAB, C++). Background in systems engineering or aerospace engineering, preferably in safety-critical environments. Experience working in regulated or defence contexts. Ability to work independently and as part of a multi-disciplinary team. Strong communication skills with the ability to present complex technical findings to diverse stakeholders. Essential Qualifications STEM Bachelor's Degree in Engineering, Physics, or related discipline. Eligibility, or willingness, to obtain UK Security Clearance. Why Join Us? This is a unique opportunity to work on frontline Typhoon mission systems at the cutting edge of UK defence technology. You will be part of a highly skilled, embedded team where your systems integration, software development, and analysis expertise directly supports operational capability. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Aug 08, 2026
Full time
Job Title: Systems Engineer - Flight Test & Evaluation Location: Coningsby, Lincolnshire Salary: DOE The Role We are seeking a Systems Engineer to provide critical systems and operational analysis in support of the design, evaluation, and assurance of Typhoon mission systems for the RAF. Embedded within 41 Test and Evaluation Squadron (TES), you will lead integration and analysis activities, develop and assure software tools, support flight test programmes, and provide subject matter expertise to ensure safe and effective capability development. You will work at the intersection of systems engineering, software, and flight test analysis, making an immediate impact on the operational performance and safety of Typhoon capabilities. Key Responsibilities Provide subject matter expertise on Typhoon mission and avionics systems. Lead systems integration and flight test analysis activities. Apply verification and validation techniques to support airworthiness and operational safety. Define and support test plans and operational analysis activities. Supervise, mentor, and guide junior engineers within the analysis team. Develop, maintain, and assure software tools for engineering analysis and reporting. Essential Experience Proven track record in delivering technical analysis and problem solving across the engineering lifecycle. Strong software skills for engineering applications (Python, MATLAB, C++). Background in systems engineering or aerospace engineering, preferably in safety-critical environments. Experience working in regulated or defence contexts. Ability to work independently and as part of a multi-disciplinary team. Strong communication skills with the ability to present complex technical findings to diverse stakeholders. Essential Qualifications STEM Bachelor's Degree in Engineering, Physics, or related discipline. Eligibility, or willingness, to obtain UK Security Clearance. Why Join Us? This is a unique opportunity to work on frontline Typhoon mission systems at the cutting edge of UK defence technology. You will be part of a highly skilled, embedded team where your systems integration, software development, and analysis expertise directly supports operational capability. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
On behalf of our client, we are seeking to recruit a Design Concession Approver on an initial 5-month contract. As the Design Concession Approver You will be responsible for leading design investigations and formulating technical solutions for Manufacturing Non-Conformances and Design Investigations ensuring that all Design, Airworthiness and safety requirements are met. Where appropriate you will also liaise with other functions to ensure a fully integrated design solution. Role: Design Concession Approver Pay: 46 - 52 per hour Via Umbrella Location: Broughton Contract: Monday - Friday 35 Hours per week, 5 Months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities You will operate as a lead design engineer and must hold design approval signatory in particular formanufacturing non-conformances (T200). You will also act as a focal point in leading and providingguidance on technical issues and governance and will support technical mentoring for engineeringteam members. A high level of energy is required to drive continuous improvement initiatives to increase team efficiency through methods, process and other improvements, where applicable ensuring a robust lesson learnt and feedback process is maintained. Reporting will be required on critical technical issues through functional managers where applicable and directly into delivery managers to ensure robust management of issues. Development of stakeholder relationships in the wider network to engineering is also required. Essential Skills: Currently holds Concession Design Approval (T200) or T100 who answer Concessions Worked on Airbus programmes previously, such A400M or A350 Motivated and self-driven with the ability to work autonomously when required, whilst being a strong team player. Deliver reliably on time, cost and quality whilst embracing change and challenge when appropriate. Anticipation mindset, able to identify risks/opportunities and manage them appropriately Understand and synthesise multiple complex activities, simplify and communicate them clearly, on a timely basis, to all stakeholders as needed. Work in an open and trusting environment. Understand, nurture and demonstrate resilience. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Aug 08, 2026
Contractor
On behalf of our client, we are seeking to recruit a Design Concession Approver on an initial 5-month contract. As the Design Concession Approver You will be responsible for leading design investigations and formulating technical solutions for Manufacturing Non-Conformances and Design Investigations ensuring that all Design, Airworthiness and safety requirements are met. Where appropriate you will also liaise with other functions to ensure a fully integrated design solution. Role: Design Concession Approver Pay: 46 - 52 per hour Via Umbrella Location: Broughton Contract: Monday - Friday 35 Hours per week, 5 Months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities You will operate as a lead design engineer and must hold design approval signatory in particular formanufacturing non-conformances (T200). You will also act as a focal point in leading and providingguidance on technical issues and governance and will support technical mentoring for engineeringteam members. A high level of energy is required to drive continuous improvement initiatives to increase team efficiency through methods, process and other improvements, where applicable ensuring a robust lesson learnt and feedback process is maintained. Reporting will be required on critical technical issues through functional managers where applicable and directly into delivery managers to ensure robust management of issues. Development of stakeholder relationships in the wider network to engineering is also required. Essential Skills: Currently holds Concession Design Approval (T200) or T100 who answer Concessions Worked on Airbus programmes previously, such A400M or A350 Motivated and self-driven with the ability to work autonomously when required, whilst being a strong team player. Deliver reliably on time, cost and quality whilst embracing change and challenge when appropriate. Anticipation mindset, able to identify risks/opportunities and manage them appropriately Understand and synthesise multiple complex activities, simplify and communicate them clearly, on a timely basis, to all stakeholders as needed. Work in an open and trusting environment. Understand, nurture and demonstrate resilience. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Our client, a prominent organisation within the Defence and Security sector, is actively seeking a Avionics Systems Engineer to join their innovative team at RAF Coningsby. This permanent role offers the chance to work with cutting-edge defence technologies, contributing to the development and assurance of mission-critical systems. Key Responsibilities: Providing expert advice and support to Typhoon and aeronautics mission and avionics systems Taking a lead role in systems integration and flight test analysis activities Applying verification and validation techniques to support airworthiness and safety Defining and supporting test plans and operational analysis activities Supporting junior engineers within the analysis team Job Requirements: Experience delivering technical analysis and problem solving across the engineering lifecycle Basic proficiency in software development for engineering applications such as Python, MATLAB, or C++ Background in systems engineering or aerospace engineering Experience working in safety critical or regulated environments Ability to work independently and as part of a multi-disciplinary team Strong communication skills and ability to present technical findings Ability to work full-time on site at RAF Coningsby Relevant STEM Bachelor's Degree Eligibility or willingness to obtain UK Security Clearance Benefits: Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more Support for the Armed Forces community, honouring the Armed Forces Covenant Volunteering opportunities If you are a dedicated and experienced Systems Engineer looking to make a significant impact in the Defence and Security sector, we would love to hear from you. Apply now to join our client's pioneering team at RAF Coningsby.
Aug 08, 2026
Full time
Our client, a prominent organisation within the Defence and Security sector, is actively seeking a Avionics Systems Engineer to join their innovative team at RAF Coningsby. This permanent role offers the chance to work with cutting-edge defence technologies, contributing to the development and assurance of mission-critical systems. Key Responsibilities: Providing expert advice and support to Typhoon and aeronautics mission and avionics systems Taking a lead role in systems integration and flight test analysis activities Applying verification and validation techniques to support airworthiness and safety Defining and supporting test plans and operational analysis activities Supporting junior engineers within the analysis team Job Requirements: Experience delivering technical analysis and problem solving across the engineering lifecycle Basic proficiency in software development for engineering applications such as Python, MATLAB, or C++ Background in systems engineering or aerospace engineering Experience working in safety critical or regulated environments Ability to work independently and as part of a multi-disciplinary team Strong communication skills and ability to present technical findings Ability to work full-time on site at RAF Coningsby Relevant STEM Bachelor's Degree Eligibility or willingness to obtain UK Security Clearance Benefits: Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more Support for the Armed Forces community, honouring the Armed Forces Covenant Volunteering opportunities If you are a dedicated and experienced Systems Engineer looking to make a significant impact in the Defence and Security sector, we would love to hear from you. Apply now to join our client's pioneering team at RAF Coningsby.
Our client has an opportunity for a Design Structures Approver to join them on a contract basis until the end of 2026. You will be responsible for leading design investigations and formulating technical solutions for a range of tasks. Role : Design Structures Approver Location : Broughton, Flintshire. Fully onsite Hours : 35 per week Hourly Rate : 44- 50 per hour via umbrella, inside IR35 Clearance : BPSS required to start What you'll be doing: Lead, guide and approve design solutions for a range of tasks, including (but not restricted to) Major/Minor Design Modifications, Design Query Notes (work's query notes). Provide technical leadership and continued mentoring to the engineering team, assisting the development of team members, assisting in the identification of skill gaps and driving plans to close the gaps. Ensuring that design standards and requirements are met, liaising with other functions and projects to ensure the design solutions are fully integrated. Operate as a design approval signatory. Support in area of knowledge the on-going continuous improvement initiatives to increase team efficiency through methods, process and other capability improvements. Support and build strong relationships between wider stakeholders including (but not limited to) CVE, Chief Engineer, Configuration Management and Local Programmes Team to enable a satisfactory design solution, and implementation on the aircraft that supports airworthiness type cert and configuration management. Requirements: Motivated and self-driven with the ability to work autonomously when required, whilst being a strong team player. Deliver reliably on time, cost and quality whilst embracing change and challenge when appropriate. Anticipation mindset, able to identify risks/opportunities and manage them appropriately Understand and synthesise multiple complex activities, simplify and communicate them clearly, on a timely basis, to all stakeholders as needed. Innovative mindset, able to think freely with a degree of curiosity to explore new or alternative ideas and approaches. Work in an open and trusting environment. Understand, nurture and demonstrate resilience. Industry recognised design signatory delegation (Design Approval) If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Aug 08, 2026
Contractor
Our client has an opportunity for a Design Structures Approver to join them on a contract basis until the end of 2026. You will be responsible for leading design investigations and formulating technical solutions for a range of tasks. Role : Design Structures Approver Location : Broughton, Flintshire. Fully onsite Hours : 35 per week Hourly Rate : 44- 50 per hour via umbrella, inside IR35 Clearance : BPSS required to start What you'll be doing: Lead, guide and approve design solutions for a range of tasks, including (but not restricted to) Major/Minor Design Modifications, Design Query Notes (work's query notes). Provide technical leadership and continued mentoring to the engineering team, assisting the development of team members, assisting in the identification of skill gaps and driving plans to close the gaps. Ensuring that design standards and requirements are met, liaising with other functions and projects to ensure the design solutions are fully integrated. Operate as a design approval signatory. Support in area of knowledge the on-going continuous improvement initiatives to increase team efficiency through methods, process and other capability improvements. Support and build strong relationships between wider stakeholders including (but not limited to) CVE, Chief Engineer, Configuration Management and Local Programmes Team to enable a satisfactory design solution, and implementation on the aircraft that supports airworthiness type cert and configuration management. Requirements: Motivated and self-driven with the ability to work autonomously when required, whilst being a strong team player. Deliver reliably on time, cost and quality whilst embracing change and challenge when appropriate. Anticipation mindset, able to identify risks/opportunities and manage them appropriately Understand and synthesise multiple complex activities, simplify and communicate them clearly, on a timely basis, to all stakeholders as needed. Innovative mindset, able to think freely with a degree of curiosity to explore new or alternative ideas and approaches. Work in an open and trusting environment. Understand, nurture and demonstrate resilience. Industry recognised design signatory delegation (Design Approval) If you are interested in applying for this position and you meet the requirements, please apply! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Contract Stress Engineer - Aircraft Fuel Systems Belcan is seeking a talented Stress Engineer to support a defence aircraft Fuel Systems Programme, delivering critical structural and stress analysis activities that directly contribute to aircraft safety, airworthiness and operational capability, based from our Bristol office on a Hybrid work pattern on an initial 12 month contract Inside IR35. Working within a multidisciplinary engineering environment, the Stress Engineer will assess and substantiate fuel system components, pipework, brackets and associated assemblies, supporting both ongoing development and in-service fleet requirements. This is an excellent opportunity to work on a prestigious defence programme where your technical expertise will have a real-world impact. What you will be doing: Performing structural and stress assessments on Eurofighter fuel system installations and components Developing analytical and finite element models using industry-standard tools Producing substantiation reports and certification evidence Assessing design modifications, non-conformances and repair solutions Supporting airworthiness, certification and investigation activities Collaborating with design, manufacturing, systems and certification teams What we're looking for: Degree in Aerospace, Mechanical Engineering or a related discipline Experience in structural or stress analysis within aerospace or another highly regulated environment Knowledge of static strength, fatigue, durability and damage tolerance principles Strong hand calculation and engineering judgement skills Experience producing technical reports and presenting engineering recommendations Desirable Experience: Military aerospace programmes Fuel systems design and certification Airworthiness and certification environments HyperWorks and CAE Pipe experience Successful applicants must meet eligibility requirements to obtain UK Security Clearance Why join Belcan? Join a team supporting a flagship defence programme, working on technically challenging engineering projects that contribute directly to the safety, performance and availability of a world-leading combat aircraft. Apply now and take your engineering career to new heights with Belcan. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan
Aug 08, 2026
Contractor
Contract Stress Engineer - Aircraft Fuel Systems Belcan is seeking a talented Stress Engineer to support a defence aircraft Fuel Systems Programme, delivering critical structural and stress analysis activities that directly contribute to aircraft safety, airworthiness and operational capability, based from our Bristol office on a Hybrid work pattern on an initial 12 month contract Inside IR35. Working within a multidisciplinary engineering environment, the Stress Engineer will assess and substantiate fuel system components, pipework, brackets and associated assemblies, supporting both ongoing development and in-service fleet requirements. This is an excellent opportunity to work on a prestigious defence programme where your technical expertise will have a real-world impact. What you will be doing: Performing structural and stress assessments on Eurofighter fuel system installations and components Developing analytical and finite element models using industry-standard tools Producing substantiation reports and certification evidence Assessing design modifications, non-conformances and repair solutions Supporting airworthiness, certification and investigation activities Collaborating with design, manufacturing, systems and certification teams What we're looking for: Degree in Aerospace, Mechanical Engineering or a related discipline Experience in structural or stress analysis within aerospace or another highly regulated environment Knowledge of static strength, fatigue, durability and damage tolerance principles Strong hand calculation and engineering judgement skills Experience producing technical reports and presenting engineering recommendations Desirable Experience: Military aerospace programmes Fuel systems design and certification Airworthiness and certification environments HyperWorks and CAE Pipe experience Successful applicants must meet eligibility requirements to obtain UK Security Clearance Why join Belcan? Join a team supporting a flagship defence programme, working on technically challenging engineering projects that contribute directly to the safety, performance and availability of a world-leading combat aircraft. Apply now and take your engineering career to new heights with Belcan. About Us Belcan, a Cognizant company, is a global force in technical services and engineering consultancy. Our legacy is built on delivering high-quality outputs and our unwavering commitment to developing the next generation of technical consultants and specialist engineers. Our expertise is vast, spanning across various engineering industries including aerospace, defence, marine, nuclear, automotive, and cyber security. This vacancy is being advertised by Belcan
On behalf of our client, we are seeking to recruit a Goods In Quality Inspector on an initial 12-month contract. Based at RAF Brize Norton, you will work closely with the Logistics Manager and wider team to ensure all quality gate processes are followed before items are accepted into Part 145 stores, while supporting compliance with regulatory and quality standards. Role: Goods In Quality Inspector Pay: Up to 22 per hour Via Umbrella Location: Brize Norton Contract: Monday - Friday 37 Hours per week, 12 Months contract (Shift work will be required after the first 6 months) IR35 Status: Inside Security Clearance : BPSS Responsibilities Receipt and evaluation inspections of complex components and assemblies using pre-set inspection plans Ensure compliance with all associated quality procedures, airworthiness control plans, and quality management system requirements Using aerospace knowledge and expertise to inspect finished products, thereby ensuring conformance with MAA/FAA/EASA Part 145 specifications and established quality standards, including customer requirements Maintain material batch and manufacturer traceability information Issue Discrepancy Reports and assisting in the resolution of customer complaints and Supplier quality problems Document and record non-conformance process issues concerning business operations Represent the Quality Management Department during internal meetings, working committees and modification programs Essential Skills: 5-7 years of knowledge of aircraft operations, materials and practices 5-7 years' experience under MAA Part 145 or EASA Part 145. Part21 experience could be also considered Knowledge of AS9100 and First Article Inspection An associate degree, two years of university or technical school within aerospace engineering, system engineering, electromechanical or similar. Logistic or Inventory management experience Experience of a customer facing role in either a military or civilian aviation environment Good computer skills, including Microsoft Office Working knowledge of a QMS system for logistics operations and regulatory requirements for control of inventory Other For the first 6 months you will work standard office hours (Monday to Thursday (Apply online only); Friday (Apply online only . After you will be required to work earlies and lates between the hours of 0700 and 1900 Monday to Friday only If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Aug 08, 2026
Contractor
On behalf of our client, we are seeking to recruit a Goods In Quality Inspector on an initial 12-month contract. Based at RAF Brize Norton, you will work closely with the Logistics Manager and wider team to ensure all quality gate processes are followed before items are accepted into Part 145 stores, while supporting compliance with regulatory and quality standards. Role: Goods In Quality Inspector Pay: Up to 22 per hour Via Umbrella Location: Brize Norton Contract: Monday - Friday 37 Hours per week, 12 Months contract (Shift work will be required after the first 6 months) IR35 Status: Inside Security Clearance : BPSS Responsibilities Receipt and evaluation inspections of complex components and assemblies using pre-set inspection plans Ensure compliance with all associated quality procedures, airworthiness control plans, and quality management system requirements Using aerospace knowledge and expertise to inspect finished products, thereby ensuring conformance with MAA/FAA/EASA Part 145 specifications and established quality standards, including customer requirements Maintain material batch and manufacturer traceability information Issue Discrepancy Reports and assisting in the resolution of customer complaints and Supplier quality problems Document and record non-conformance process issues concerning business operations Represent the Quality Management Department during internal meetings, working committees and modification programs Essential Skills: 5-7 years of knowledge of aircraft operations, materials and practices 5-7 years' experience under MAA Part 145 or EASA Part 145. Part21 experience could be also considered Knowledge of AS9100 and First Article Inspection An associate degree, two years of university or technical school within aerospace engineering, system engineering, electromechanical or similar. Logistic or Inventory management experience Experience of a customer facing role in either a military or civilian aviation environment Good computer skills, including Microsoft Office Working knowledge of a QMS system for logistics operations and regulatory requirements for control of inventory Other For the first 6 months you will work standard office hours (Monday to Thursday (Apply online only); Friday (Apply online only . After you will be required to work earlies and lates between the hours of 0700 and 1900 Monday to Friday only If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
MAIN PURPOSE OF ROLE To efficiently and safely carry out maintenance and technical tasks in accordance with approved procedures, technical data, regulatory requirements, and company standards, ensuring safety, quality, compliance, and operational effectiveness at all times. KEY RESPONSIBILITIES Carry out maintenance and repair activities as directed by supervisors and in accordance with approved technical data, procedures, and company requirements. Comply with all company Health & Safety policies, procedures, and reporting requirements, including the reporting of accidents, hazards, and near misses. Maintain high standards of housekeeping and ensure a safe and organised working environment. Follow approved instructions, procedures, and regulatory requirements at all times. Ensure all work undertaken is accurately recorded and documented to the required standard. Participate in effective shift and task handovers to maintain continuity and safety. Maintain and control personal tools, equipment, and work assets in accordance with company procedures. Identify and report safety, quality, compliance, or airworthiness concerns through the appropriate internal reporting channels. Support the achievement of operational, safety, quality, and customer-service objectives. KNOWLEDGE, EDUCATION & EXPERIENCE Relevant engineering apprenticeship, vocational training, military technical training, or equivalent practical experience. Awareness of Human Factors and other relevant safety and compliance training requirements. Working knowledge of company processes, procedures, and maintenance documentation systems. Basic understanding of applicable aviation, engineering, health and safety, and regulatory requirements. Basic IT literacy and experience using workplace systems and documentation tools. SKILLS, BEHAVIOURS & COMPETENCIES Demonstrates a commitment to continuous learning, development, and performance improvement. Communicates effectively with colleagues, supervisors, customers, and stakeholders. Willing and confident to challenge unsafe practices and behaviours that conflict with company values or procedures. Able to work independently and as part of a team, using initiative to identify and resolve problems where appropriate. Understands the importance of efficiency, productivity, and cost awareness. Strong organisational and time-management skills. Honest, dependable, and professional, with a positive and proactive attitude. Demonstrates behaviours aligned with company values and contributes positively to the workplace culture. Supports teamwork and collaboration to maximise individual and team performance. Flexible and adaptable in responding to operational and business requirements, including working at alternative locations when required.
Aug 07, 2026
Full time
MAIN PURPOSE OF ROLE To efficiently and safely carry out maintenance and technical tasks in accordance with approved procedures, technical data, regulatory requirements, and company standards, ensuring safety, quality, compliance, and operational effectiveness at all times. KEY RESPONSIBILITIES Carry out maintenance and repair activities as directed by supervisors and in accordance with approved technical data, procedures, and company requirements. Comply with all company Health & Safety policies, procedures, and reporting requirements, including the reporting of accidents, hazards, and near misses. Maintain high standards of housekeeping and ensure a safe and organised working environment. Follow approved instructions, procedures, and regulatory requirements at all times. Ensure all work undertaken is accurately recorded and documented to the required standard. Participate in effective shift and task handovers to maintain continuity and safety. Maintain and control personal tools, equipment, and work assets in accordance with company procedures. Identify and report safety, quality, compliance, or airworthiness concerns through the appropriate internal reporting channels. Support the achievement of operational, safety, quality, and customer-service objectives. KNOWLEDGE, EDUCATION & EXPERIENCE Relevant engineering apprenticeship, vocational training, military technical training, or equivalent practical experience. Awareness of Human Factors and other relevant safety and compliance training requirements. Working knowledge of company processes, procedures, and maintenance documentation systems. Basic understanding of applicable aviation, engineering, health and safety, and regulatory requirements. Basic IT literacy and experience using workplace systems and documentation tools. SKILLS, BEHAVIOURS & COMPETENCIES Demonstrates a commitment to continuous learning, development, and performance improvement. Communicates effectively with colleagues, supervisors, customers, and stakeholders. Willing and confident to challenge unsafe practices and behaviours that conflict with company values or procedures. Able to work independently and as part of a team, using initiative to identify and resolve problems where appropriate. Understands the importance of efficiency, productivity, and cost awareness. Strong organisational and time-management skills. Honest, dependable, and professional, with a positive and proactive attitude. Demonstrates behaviours aligned with company values and contributes positively to the workplace culture. Supports teamwork and collaboration to maximise individual and team performance. Flexible and adaptable in responding to operational and business requirements, including working at alternative locations when required.
MAIN PURPOSE OF ROLE To efficiently and safely carry out maintenance and technical tasks in accordance with approved procedures, technical data, regulatory requirements, and company standards, ensuring safety, quality, compliance, and operational effectiveness at all times. KEY RESPONSIBILITIES Carry out maintenance and repair activities as directed by supervisors and in accordance with approved technical data, procedures, and company requirements. Comply with all company Health & Safety policies, procedures, and reporting requirements, including the reporting of accidents, hazards, and near misses. Maintain high standards of housekeeping and ensure a safe and organised working environment. Follow approved instructions, procedures, and regulatory requirements at all times. Ensure all work undertaken is accurately recorded and documented to the required standard. Participate in effective shift and task handovers to maintain continuity and safety. Maintain and control personal tools, equipment, and work assets in accordance with company procedures. Identify and report safety, quality, compliance, or airworthiness concerns through the appropriate internal reporting channels. Support the achievement of operational, safety, quality, and customer-service objectives. KNOWLEDGE, EDUCATION & EXPERIENCE Relevant engineering apprenticeship, vocational training, military technical training, or equivalent practical experience. Awareness of Human Factors and other relevant safety and compliance training requirements. Working knowledge of company processes, procedures, and maintenance documentation systems. Basic understanding of applicable aviation, engineering, health and safety, and regulatory requirements. Basic IT literacy and experience using workplace systems and documentation tools. SKILLS, BEHAVIOURS & COMPETENCIES Demonstrates a commitment to continuous learning, development, and performance improvement. Communicates effectively with colleagues, supervisors, customers, and stakeholders. Willing and confident to challenge unsafe practices and behaviours that conflict with company values or procedures. Able to work independently and as part of a team, using initiative to identify and resolve problems where appropriate. Understands the importance of efficiency, productivity, and cost awareness. Strong organisational and time-management skills. Honest, dependable, and professional, with a positive and proactive attitude. Demonstrates behaviours aligned with company values and contributes positively to the workplace culture. Supports teamwork and collaboration to maximise individual and team performance. Flexible and adaptable in responding to operational and business requirements, including working at alternative locations when required.
Aug 07, 2026
Full time
MAIN PURPOSE OF ROLE To efficiently and safely carry out maintenance and technical tasks in accordance with approved procedures, technical data, regulatory requirements, and company standards, ensuring safety, quality, compliance, and operational effectiveness at all times. KEY RESPONSIBILITIES Carry out maintenance and repair activities as directed by supervisors and in accordance with approved technical data, procedures, and company requirements. Comply with all company Health & Safety policies, procedures, and reporting requirements, including the reporting of accidents, hazards, and near misses. Maintain high standards of housekeeping and ensure a safe and organised working environment. Follow approved instructions, procedures, and regulatory requirements at all times. Ensure all work undertaken is accurately recorded and documented to the required standard. Participate in effective shift and task handovers to maintain continuity and safety. Maintain and control personal tools, equipment, and work assets in accordance with company procedures. Identify and report safety, quality, compliance, or airworthiness concerns through the appropriate internal reporting channels. Support the achievement of operational, safety, quality, and customer-service objectives. KNOWLEDGE, EDUCATION & EXPERIENCE Relevant engineering apprenticeship, vocational training, military technical training, or equivalent practical experience. Awareness of Human Factors and other relevant safety and compliance training requirements. Working knowledge of company processes, procedures, and maintenance documentation systems. Basic understanding of applicable aviation, engineering, health and safety, and regulatory requirements. Basic IT literacy and experience using workplace systems and documentation tools. SKILLS, BEHAVIOURS & COMPETENCIES Demonstrates a commitment to continuous learning, development, and performance improvement. Communicates effectively with colleagues, supervisors, customers, and stakeholders. Willing and confident to challenge unsafe practices and behaviours that conflict with company values or procedures. Able to work independently and as part of a team, using initiative to identify and resolve problems where appropriate. Understands the importance of efficiency, productivity, and cost awareness. Strong organisational and time-management skills. Honest, dependable, and professional, with a positive and proactive attitude. Demonstrates behaviours aligned with company values and contributes positively to the workplace culture. Supports teamwork and collaboration to maximise individual and team performance. Flexible and adaptable in responding to operational and business requirements, including working at alternative locations when required.
An Exciting Opportunity in Aerospace Engineering Are you ready to make an impact in the aerospace industry? This company is seeking a talented Lead FEM Engineer to join their dynamic Wing engineering team at their Filton facility. This is your chance to work on cutting-edge projects whilst contributing to innovative solutions in a collaborative, forward-thinking environment. About the Role The Lead FEM Engineer position offers a unique opportunity to take a central role in developing Finite Element Modelling solutions. As a Lead FEM Engineer , the successful candidate will: Support the development of GFEM and DFEM projects across multiple programmes Analyse and validate FE and stress data, proposing design solutions optimised for weight, cost, performance, and manufacturing requirements Deliver static and fatigue ennoblement to Wing design teams Drive digital solutions to enhance Wing structure ennoblement processes Act as a focal point for FE and digital activities, defining priorities and highlighting risks Champion innovation and continuous improvement across the team Interface with key stakeholders across transnational teams What We're Looking For To excel in this Lead FEM Engineer role, candidates should possess: Degree-level education in Aerospace Engineering 5-10 years of professional experience in finite element modelling Proven expertise with FEM tools including Hyperworks, Hypermesh, and MSC Nastran Experience idealising Wing component structures using Finite Element Methodology Strong knowledge of airworthiness requirements and Airbus policies Excellent communication skills and the ability to work collaboratively Fluent English at negotiation level (written and verbal) A proactive, dynamic approach with strong problem-solving abilities Advantageous: FEM Signature delegation, ISAMI competency, and experience with UNIX-based platforms. The Details Location: Filton Position Type: Lead FEM Engineer (Contract) Hours: 35 hours per week (4.5 days, flexible between 7am-7pm) On-Site: 80% onsite Provisional End Date: 01 March 2027 (with probable extension) Security Clearance: BPSS+ (to be completed by company security) Pay Rate: 46.00 per hour (Umbrella) / 34.39 per hour (PAYE) Travel: Occasional IR35 Status: Off-payroll working rules apply Why Join This Company? This company values innovation, collaboration, and continuous improvement. The Lead FEM Engineer will work within a forward-thinking team committed to digital transformation and embracing new ways of working. There's genuine opportunity to influence engineering practices, develop professionally, and contribute to world-class aerospace projects. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Aug 07, 2026
Contractor
An Exciting Opportunity in Aerospace Engineering Are you ready to make an impact in the aerospace industry? This company is seeking a talented Lead FEM Engineer to join their dynamic Wing engineering team at their Filton facility. This is your chance to work on cutting-edge projects whilst contributing to innovative solutions in a collaborative, forward-thinking environment. About the Role The Lead FEM Engineer position offers a unique opportunity to take a central role in developing Finite Element Modelling solutions. As a Lead FEM Engineer , the successful candidate will: Support the development of GFEM and DFEM projects across multiple programmes Analyse and validate FE and stress data, proposing design solutions optimised for weight, cost, performance, and manufacturing requirements Deliver static and fatigue ennoblement to Wing design teams Drive digital solutions to enhance Wing structure ennoblement processes Act as a focal point for FE and digital activities, defining priorities and highlighting risks Champion innovation and continuous improvement across the team Interface with key stakeholders across transnational teams What We're Looking For To excel in this Lead FEM Engineer role, candidates should possess: Degree-level education in Aerospace Engineering 5-10 years of professional experience in finite element modelling Proven expertise with FEM tools including Hyperworks, Hypermesh, and MSC Nastran Experience idealising Wing component structures using Finite Element Methodology Strong knowledge of airworthiness requirements and Airbus policies Excellent communication skills and the ability to work collaboratively Fluent English at negotiation level (written and verbal) A proactive, dynamic approach with strong problem-solving abilities Advantageous: FEM Signature delegation, ISAMI competency, and experience with UNIX-based platforms. The Details Location: Filton Position Type: Lead FEM Engineer (Contract) Hours: 35 hours per week (4.5 days, flexible between 7am-7pm) On-Site: 80% onsite Provisional End Date: 01 March 2027 (with probable extension) Security Clearance: BPSS+ (to be completed by company security) Pay Rate: 46.00 per hour (Umbrella) / 34.39 per hour (PAYE) Travel: Occasional IR35 Status: Off-payroll working rules apply Why Join This Company? This company values innovation, collaboration, and continuous improvement. The Lead FEM Engineer will work within a forward-thinking team committed to digital transformation and embracing new ways of working. There's genuine opportunity to influence engineering practices, develop professionally, and contribute to world-class aerospace projects. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Aircraft Mechanic (5 positions available) Location: Norwich Salary: 38,608 Hours: 37.5 hours per week (seasonal working pattern) The Opportunity We're looking for an experienced Aircraft Mechanic to join a well established aircraft maintenance organisation supporting base maintenance operations in a regulated Part 145 environment. This is an excellent opportunity to join a stable employer offering a strong benefits package, structured working hours, and long term career development. You'll work as part of a skilled maintenance team carrying out aircraft maintenance in accordance with approved maintenance data while ensuring the highest standards of safety, quality and airworthiness. Working Hours This role operates on a seasonal shift pattern: Winter (Mid October to Mid April) Monday to Thursday: 07:30 to 16:30 Friday: 07:30 to 16:00 Summer (Mid April to Mid October) Monday to Thursday: 07:30 to 14:30 Friday: 07:30 to 14:00 Depending on your start date, summer hours may temporarily be 07:30 to 15:30 to maintain the annual average working week. Responsibilities As an Aircraft Mechanic, you will: Carry out aircraft maintenance in accordance with approved maintenance data and company procedures. Complete maintenance activities safely, efficiently and to the required airworthiness standards. Ensure all maintenance work is accurately documented. Follow all company Health & Safety policies and report any hazards, incidents or near misses. Maintain excellent housekeeping standards within the work area. Ensure effective shift handovers. Maintain and control personal tooling in line with company procedures. Report airworthiness and safety concerns through the internal reporting system. Support aircraft maintenance activities at outstations when required. What We're Looking For To be considered, you'll ideally have: A recognised Aircraft Engineering Apprenticeship or Armed Forces aircraft engineering training. Human Factors training. Fuel Tank Safety (FTS) training. EWIS (Electrical Wiring Interconnection Systems) training. Basic understanding of UK CAA/EASA Part 145 requirements and Health & Safety legislation. Basic IT skills. Knowledge of aircraft maintenance documentation and approved maintenance procedures. About You You'll be someone who: Takes pride in producing high quality work. Communicates effectively with colleagues across the maintenance team. Works well independently and as part of a team. Has a proactive, positive attitude and a willingness to learn. Manages time effectively and works efficiently. Demonstrates integrity, professionalism and accountability. Is confident raising safety or quality concerns where appropriate. Understands the importance of delivering work safely, compliantly and on time. Benefits In return, you'll receive an excellent package including: Salary of 38,608 Enhanced sick pay that increases with length of service Additional annual leave for long service Health Shield cash plan Subsidised on site canteen Stakeholder pension with up to 6% employer contribution Life assurance Retail discounts Cycle to Work scheme Electric Vehicle scheme Wellbeing support Active social club and company events Long service awards Free on site parking
Aug 07, 2026
Full time
Aircraft Mechanic (5 positions available) Location: Norwich Salary: 38,608 Hours: 37.5 hours per week (seasonal working pattern) The Opportunity We're looking for an experienced Aircraft Mechanic to join a well established aircraft maintenance organisation supporting base maintenance operations in a regulated Part 145 environment. This is an excellent opportunity to join a stable employer offering a strong benefits package, structured working hours, and long term career development. You'll work as part of a skilled maintenance team carrying out aircraft maintenance in accordance with approved maintenance data while ensuring the highest standards of safety, quality and airworthiness. Working Hours This role operates on a seasonal shift pattern: Winter (Mid October to Mid April) Monday to Thursday: 07:30 to 16:30 Friday: 07:30 to 16:00 Summer (Mid April to Mid October) Monday to Thursday: 07:30 to 14:30 Friday: 07:30 to 14:00 Depending on your start date, summer hours may temporarily be 07:30 to 15:30 to maintain the annual average working week. Responsibilities As an Aircraft Mechanic, you will: Carry out aircraft maintenance in accordance with approved maintenance data and company procedures. Complete maintenance activities safely, efficiently and to the required airworthiness standards. Ensure all maintenance work is accurately documented. Follow all company Health & Safety policies and report any hazards, incidents or near misses. Maintain excellent housekeeping standards within the work area. Ensure effective shift handovers. Maintain and control personal tooling in line with company procedures. Report airworthiness and safety concerns through the internal reporting system. Support aircraft maintenance activities at outstations when required. What We're Looking For To be considered, you'll ideally have: A recognised Aircraft Engineering Apprenticeship or Armed Forces aircraft engineering training. Human Factors training. Fuel Tank Safety (FTS) training. EWIS (Electrical Wiring Interconnection Systems) training. Basic understanding of UK CAA/EASA Part 145 requirements and Health & Safety legislation. Basic IT skills. Knowledge of aircraft maintenance documentation and approved maintenance procedures. About You You'll be someone who: Takes pride in producing high quality work. Communicates effectively with colleagues across the maintenance team. Works well independently and as part of a team. Has a proactive, positive attitude and a willingness to learn. Manages time effectively and works efficiently. Demonstrates integrity, professionalism and accountability. Is confident raising safety or quality concerns where appropriate. Understands the importance of delivering work safely, compliantly and on time. Benefits In return, you'll receive an excellent package including: Salary of 38,608 Enhanced sick pay that increases with length of service Additional annual leave for long service Health Shield cash plan Subsidised on site canteen Stakeholder pension with up to 6% employer contribution Life assurance Retail discounts Cycle to Work scheme Electric Vehicle scheme Wellbeing support Active social club and company events Long service awards Free on site parking
Infoplus Technologies UK Ltd
Broughton, Lincolnshire
Job Description: Manage E2E (End to End) work flow, concession preparation, writing, validation and co-Ordination with stake holders Managing Non Conformities (MNCs) and Concessions, including design assessments and validations. Providing Design Liaison and Design for Manufacture support, including preliminary QSR, DQN, and WQN investigations and green quality gate achievement. Review concession data for completeness and accuracy. Analyze deviations from engineering drawings, specifications, standards, or process requirements. Co-ordinate with Quality team for any clarifications required related to Non conformances. Liaise with multiple functions to ensure most appropriate repair solution is met with consideration to cost, time, performance, and installation requirements. Coordination with Supply chain on the availability of rare repair fasteners before finalizing the disposition Provide disposition decisions (use as is, repair, rework, scrap, return to supplier). Identify repeating issues and escalate for corrective action Propose design improvement to Engineering on repetitive defects and manufacturing teams to strengthen process controls If required, Design Special parts to resolve nonconformity. Review concession and recommend for design change request if nonconformity is caused by design issue. Manage engineering data, documentation, and deliverables in compliance with quality and configuration requirements. Support digital continuity initiatives and contribute to continuous improvement in design and communication processes. Serve as a technical representative for onsite offshore coordination, addressing queries, Return to Task(RTT) clarifications, and technical escalations. Skillset: General knowledge, understanding and use of all relevant specific Airbus documentations and specifications as: Acceptance criteria (installation instruction), Tool guideline (VPM, ASR, SAP ), Suffix and ASR use and Specific guideline (flushness ) Knowledge of Non conformity declaration for structural parts and assemblies. Understanding of aerospace design principles and airworthiness requirements. Knowledge of metallic and composite design principles. Knowledge of Airbus processes and procedures relating to design (RSDP, SIDP, AP, ABD, AIPI, AIPS, etc ). Experience of using Airbus Supply (DocMaster, Airnavx etc.). Valid Airbus training certificates in SAP, VPM and PASS SSI. Tools: CATIAv5, SAP (PAC/PEA), PASS, Zamiz, PRIMES, GEMAVICC, GILDA, COLINA, TREND, VPM, AIRNav
Aug 07, 2026
Contractor
Job Description: Manage E2E (End to End) work flow, concession preparation, writing, validation and co-Ordination with stake holders Managing Non Conformities (MNCs) and Concessions, including design assessments and validations. Providing Design Liaison and Design for Manufacture support, including preliminary QSR, DQN, and WQN investigations and green quality gate achievement. Review concession data for completeness and accuracy. Analyze deviations from engineering drawings, specifications, standards, or process requirements. Co-ordinate with Quality team for any clarifications required related to Non conformances. Liaise with multiple functions to ensure most appropriate repair solution is met with consideration to cost, time, performance, and installation requirements. Coordination with Supply chain on the availability of rare repair fasteners before finalizing the disposition Provide disposition decisions (use as is, repair, rework, scrap, return to supplier). Identify repeating issues and escalate for corrective action Propose design improvement to Engineering on repetitive defects and manufacturing teams to strengthen process controls If required, Design Special parts to resolve nonconformity. Review concession and recommend for design change request if nonconformity is caused by design issue. Manage engineering data, documentation, and deliverables in compliance with quality and configuration requirements. Support digital continuity initiatives and contribute to continuous improvement in design and communication processes. Serve as a technical representative for onsite offshore coordination, addressing queries, Return to Task(RTT) clarifications, and technical escalations. Skillset: General knowledge, understanding and use of all relevant specific Airbus documentations and specifications as: Acceptance criteria (installation instruction), Tool guideline (VPM, ASR, SAP ), Suffix and ASR use and Specific guideline (flushness ) Knowledge of Non conformity declaration for structural parts and assemblies. Understanding of aerospace design principles and airworthiness requirements. Knowledge of metallic and composite design principles. Knowledge of Airbus processes and procedures relating to design (RSDP, SIDP, AP, ABD, AIPI, AIPS, etc ). Experience of using Airbus Supply (DocMaster, Airnavx etc.). Valid Airbus training certificates in SAP, VPM and PASS SSI. Tools: CATIAv5, SAP (PAC/PEA), PASS, Zamiz, PRIMES, GEMAVICC, GILDA, COLINA, TREND, VPM, AIRNav
Our client is actively recruiting for multiple B1.3 Licensed Aircraft Engineers on a permanent basis in Oxfordshire, to support the maintenance and continued airworthiness of their Rotary fleet. The successful candidate will be responsible for carrying out and certifying maintenance activities in accordance with UK CAA regulations, approved maintenance data, and company procedures. Key Responsibilities: Perform and certify scheduled and unscheduled maintenance on helicopters within the scope of B1.3 licence privileges. Carry out inspections, defect diagnosis, repairs, modifications, and component replacements. Troubleshoot and rectify airframe, engine, transmission, rotor, hydraulic, fuel, and mechanical system defects. Complete Certificates of Release to Service (CRS) in accordance with company authorisations. Ensure all maintenance documentation and technical records are accurately completed. Comply with Part-145 requirements, Safety Management System (SMS) procedures, and company policies. Support line maintenance, base maintenance, and Aircraft on Ground (AOG) recovery activities as required. Supervise and provide technical guidance to mechanics, fitters, and apprentices. Essential Requirements: UK CAA Part-66 B1.3 Aircraft Maintenance Licence (Turbine Rotorcraft). Type rating and certification experience on one or more of the following: H125 H130 H135 H145 H160 Experience within a Part-145 maintenance environment. Strong fault-finding and troubleshooting skills. Excellent understanding of airworthiness and regulatory requirements. Desirable: Multiple Airbus Helicopters type ratings. Ground run authorisation. Rotor track and balance experience. Previous experience supporting EMS, offshore, utility, military, or commercial helicopter operations. Key Competencies: Safety and compliance focused. Strong technical judgement. Excellent attention to detail. Effective communication and teamwork. Ability to work under pressure and meet operational deadlines. If you are a dedicated B1.3 Licensed Engineer with a passion for maintaining and ensuring the airworthiness of rotary aircraft, we would love to hear from you. Apply now to join our client's team in Oxfordshire.
Aug 07, 2026
Full time
Our client is actively recruiting for multiple B1.3 Licensed Aircraft Engineers on a permanent basis in Oxfordshire, to support the maintenance and continued airworthiness of their Rotary fleet. The successful candidate will be responsible for carrying out and certifying maintenance activities in accordance with UK CAA regulations, approved maintenance data, and company procedures. Key Responsibilities: Perform and certify scheduled and unscheduled maintenance on helicopters within the scope of B1.3 licence privileges. Carry out inspections, defect diagnosis, repairs, modifications, and component replacements. Troubleshoot and rectify airframe, engine, transmission, rotor, hydraulic, fuel, and mechanical system defects. Complete Certificates of Release to Service (CRS) in accordance with company authorisations. Ensure all maintenance documentation and technical records are accurately completed. Comply with Part-145 requirements, Safety Management System (SMS) procedures, and company policies. Support line maintenance, base maintenance, and Aircraft on Ground (AOG) recovery activities as required. Supervise and provide technical guidance to mechanics, fitters, and apprentices. Essential Requirements: UK CAA Part-66 B1.3 Aircraft Maintenance Licence (Turbine Rotorcraft). Type rating and certification experience on one or more of the following: H125 H130 H135 H145 H160 Experience within a Part-145 maintenance environment. Strong fault-finding and troubleshooting skills. Excellent understanding of airworthiness and regulatory requirements. Desirable: Multiple Airbus Helicopters type ratings. Ground run authorisation. Rotor track and balance experience. Previous experience supporting EMS, offshore, utility, military, or commercial helicopter operations. Key Competencies: Safety and compliance focused. Strong technical judgement. Excellent attention to detail. Effective communication and teamwork. Ability to work under pressure and meet operational deadlines. If you are a dedicated B1.3 Licensed Engineer with a passion for maintaining and ensuring the airworthiness of rotary aircraft, we would love to hear from you. Apply now to join our client's team in Oxfordshire.
Aircraft Mechanic (5 positions available) Location: Norwich Salary: £38,608 Hours: 37.5 hours per week (seasonal working pattern) The Opportunity We're looking for an experienced Aircraft Mechanic to join a well established aircraft maintenance organisation supporting base maintenance operations in a regulated Part 145 environment. This is an excellent opportunity to join a stable employer offering a strong benefits package, structured working hours, and long term career development. You'll work as part of a skilled maintenance team carrying out aircraft maintenance in accordance with approved maintenance data while ensuring the highest standards of safety, quality and airworthiness. Working Hours This role operates on a seasonal shift pattern: Winter (Mid October to Mid April) Monday to Thursday: 07:30 to 16:30 Friday: 07:30 to 16:00 Summer (Mid April to Mid October) Monday to Thursday: 07:30 to 14:30 Friday: 07:30 to 14:00 Depending on your start date, summer hours may temporarily be 07:30 to 15:30 to maintain the annual average working week. Responsibilities As an Aircraft Mechanic, you will: Carry out aircraft maintenance in accordance with approved maintenance data and company procedures. Complete maintenance activities safely, efficiently and to the required airworthiness standards. Ensure all maintenance work is accurately documented. Follow all company Health & Safety policies and report any hazards, incidents or near misses. Maintain excellent housekeeping standards within the work area. Ensure effective shift handovers. Maintain and control personal tooling in line with company procedures. Report airworthiness and safety concerns through the internal reporting system. Support aircraft maintenance activities at outstations when required. What We're Looking For To be considered, you'll ideally have: A recognised Aircraft Engineering Apprenticeship or Armed Forces aircraft engineering training. Human Factors training. Fuel Tank Safety (FTS) training. EWIS (Electrical Wiring Interconnection Systems) training. Basic understanding of UK CAA/EASA Part 145 requirements and Health & Safety legislation. Basic IT skills. Knowledge of aircraft maintenance documentation and approved maintenance procedures. About You You'll be someone who: Takes pride in producing high quality work. Communicates effectively with colleagues across the maintenance team. Works well independently and as part of a team. Has a proactive, positive attitude and a willingness to learn. Manages time effectively and works efficiently. Demonstrates integrity, professionalism and accountability. Is confident raising safety or quality concerns where appropriate. Understands the importance of delivering work safely, compliantly and on time. Benefits In return, you'll receive an excellent package including: Salary of £38,608 Enhanced sick pay that increases with length of service Additional annual leave for long service Health Shield cash plan Subsidised on site canteen Stakeholder pension with up to 6% employer contribution Life assurance Retail discounts Cycle to Work scheme Electric Vehicle scheme Wellbeing support Active social club and company events Long service awards Free on site parking
Aug 07, 2026
Full time
Aircraft Mechanic (5 positions available) Location: Norwich Salary: £38,608 Hours: 37.5 hours per week (seasonal working pattern) The Opportunity We're looking for an experienced Aircraft Mechanic to join a well established aircraft maintenance organisation supporting base maintenance operations in a regulated Part 145 environment. This is an excellent opportunity to join a stable employer offering a strong benefits package, structured working hours, and long term career development. You'll work as part of a skilled maintenance team carrying out aircraft maintenance in accordance with approved maintenance data while ensuring the highest standards of safety, quality and airworthiness. Working Hours This role operates on a seasonal shift pattern: Winter (Mid October to Mid April) Monday to Thursday: 07:30 to 16:30 Friday: 07:30 to 16:00 Summer (Mid April to Mid October) Monday to Thursday: 07:30 to 14:30 Friday: 07:30 to 14:00 Depending on your start date, summer hours may temporarily be 07:30 to 15:30 to maintain the annual average working week. Responsibilities As an Aircraft Mechanic, you will: Carry out aircraft maintenance in accordance with approved maintenance data and company procedures. Complete maintenance activities safely, efficiently and to the required airworthiness standards. Ensure all maintenance work is accurately documented. Follow all company Health & Safety policies and report any hazards, incidents or near misses. Maintain excellent housekeeping standards within the work area. Ensure effective shift handovers. Maintain and control personal tooling in line with company procedures. Report airworthiness and safety concerns through the internal reporting system. Support aircraft maintenance activities at outstations when required. What We're Looking For To be considered, you'll ideally have: A recognised Aircraft Engineering Apprenticeship or Armed Forces aircraft engineering training. Human Factors training. Fuel Tank Safety (FTS) training. EWIS (Electrical Wiring Interconnection Systems) training. Basic understanding of UK CAA/EASA Part 145 requirements and Health & Safety legislation. Basic IT skills. Knowledge of aircraft maintenance documentation and approved maintenance procedures. About You You'll be someone who: Takes pride in producing high quality work. Communicates effectively with colleagues across the maintenance team. Works well independently and as part of a team. Has a proactive, positive attitude and a willingness to learn. Manages time effectively and works efficiently. Demonstrates integrity, professionalism and accountability. Is confident raising safety or quality concerns where appropriate. Understands the importance of delivering work safely, compliantly and on time. Benefits In return, you'll receive an excellent package including: Salary of £38,608 Enhanced sick pay that increases with length of service Additional annual leave for long service Health Shield cash plan Subsidised on site canteen Stakeholder pension with up to 6% employer contribution Life assurance Retail discounts Cycle to Work scheme Electric Vehicle scheme Wellbeing support Active social club and company events Long service awards Free on site parking
Job Title: Aircraft Mechanic Location: RAF Marham, Norfolk Role Type: Permanent Salary: £36,443 + benefits & relocation support potential Aircraft Mechanics required to join a leading engineering business providing support to the F-35 Fleet based at RAF Marham. 4 Day Working Week Monday - Thursday Hours: Candidates would need to hold British nationality and have lived & worked in the UK for 5+ years and be eligible for SC security clearance. What the role of the Aircraft Mechanic entails: Ensure that all maintenance activities are conducted in accordance with the Approved Technical Information and relevant risk assessments and that all airworthiness records are maintained Make sure all activities are appropriately documented and identify and report any issues and escalate as appropriate Procedure/Standards - Complying with the Organisations MOE, its associated procedures and standards, and any other company procedures and standards Safety Management System - You will understand and apply human factors, error management, within maintenance Continuing Airworthiness Assurance (Quality) - Ensuring maintenance activities are compliant with the Continuing Airworthiness Assurance Management system You will be undertaking a range of maintenance on an aircraft which may include, as appropriate, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test What experience you need to be the successful Aircraft Mechanic: Experience of EASA/MRP Part 145 Experience of working on military aircraft programmes Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or equivalent military qualifications Academic qualification for this role is a minimum of Level 3 qualification in Aeronautical Engineering and Maintenance or equivalent e.g. City & Guilds 2675 or 2661. This really is a fantastic opportunity for an Aircraft Mechanic to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! INDALL Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Aug 06, 2026
Full time
Job Title: Aircraft Mechanic Location: RAF Marham, Norfolk Role Type: Permanent Salary: £36,443 + benefits & relocation support potential Aircraft Mechanics required to join a leading engineering business providing support to the F-35 Fleet based at RAF Marham. 4 Day Working Week Monday - Thursday Hours: Candidates would need to hold British nationality and have lived & worked in the UK for 5+ years and be eligible for SC security clearance. What the role of the Aircraft Mechanic entails: Ensure that all maintenance activities are conducted in accordance with the Approved Technical Information and relevant risk assessments and that all airworthiness records are maintained Make sure all activities are appropriately documented and identify and report any issues and escalate as appropriate Procedure/Standards - Complying with the Organisations MOE, its associated procedures and standards, and any other company procedures and standards Safety Management System - You will understand and apply human factors, error management, within maintenance Continuing Airworthiness Assurance (Quality) - Ensuring maintenance activities are compliant with the Continuing Airworthiness Assurance Management system You will be undertaking a range of maintenance on an aircraft which may include, as appropriate, aircraft role changes, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test What experience you need to be the successful Aircraft Mechanic: Experience of EASA/MRP Part 145 Experience of working on military aircraft programmes Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or equivalent military qualifications Academic qualification for this role is a minimum of Level 3 qualification in Aeronautical Engineering and Maintenance or equivalent e.g. City & Guilds 2675 or 2661. This really is a fantastic opportunity for an Aircraft Mechanic to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! INDALL Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
