1129 jobs found

Branta are seeking an experienced, technically robust Hard Services Manager for a contract role in Newcastle for a business-critical, 6-month contract. The successful individual will take operational ownership of the compliance, management, and strategic delivery of all building-related engineering services. You will be responsible for ensuring that statutory, mandatory, and organisational requirements are met while guaranteeing safe, reliable, and efficient mechanical, electrical, and building fabric services across the entire portfolio. Key Duties & Responsibilities Operational & Technical Leadership Lead and manage all daily mechanical, electrical, and building fabric maintenance activities across a diverse multi-site estate. Oversee and optimize active planned preventive maintenance (PPM), reactive breakdown pipelines, and critical lifecycle asset replacement programmes. Ensure all critical building infrastructure (HVAC, electrical distribution, BMS systems, water hygiene, fire safety systems, and lifts) operates safely and in absolute alignment with UK legislation. Act as the estate's Authorised Person (e.g., AP Electrical, AP Mechanical, AP Pressure Systems, or Water) as required. Compliance, Safety & Risk Mitigation Drive 100% statutory and regulatory compliance across the estate, ensuring strict adherence to Health & Safety at Work legislation, Electricity at Work Regulations, LOLER, PUWER, COSHH, and Water Safety (ACoP L8). Maintain pristine, audit-ready compliance files, asset registries, data logs, and comprehensive audit trails. Review, challenge, and sign off on contractor RAMS and implement strict safe systems of work (SSOW) and hot works permits. Contractor & Team Management Supervise and mentor the internal engineering workforce (supervisors, technicians, and craft personnel), planning and prioritizing workloads to maximize floor efficiency. Manage, audit, and hold accountable specialist third-party engineering contractors against strict SLAs and KPIs. Support the wider team with procurement, localized tendering processes, and performance evaluations for specialist hard services vendors. Commercial & Financial Control Administer fixed budgets for hard services, overseeing spend on planned works, reactive callouts, and minor capital upgrades. Track contractor billing, forecast financial requirements for the remainder of the contract term, and drive cost efficiencies. Contribute technical expertise to long-term capital investment schemes, estate resilience planning, and corporate decarbonization/sustainability goals. The Ideal Candidate (Person Specification) Qualifications & Technical Bias: A strong, time-served mechanical, electrical, or building services engineering bias. Recognized Authorised Person (AP) training credentials (electrical, mechanical, pressure, or water safety). Formal health and safety qualifications (IOSH Managing Safely or NEBOSH General Certificate). Professional engineering registration (IEng/CEng) is highly desirable but not strictly mandatory. Experience Required: Significant, verifiable track record managing Hard FM services within a complex, multi-site corporate, educational, public, or healthcare estate. Exceptional leadership credentials with experience managing both directly employed mobile trade technicians and specialist tier-1 external subcontractors. Proficient in the deployment, tracking, and close-out of tasks within corporate CAFM systems. Deep, practical knowledge of UK statutory compliance parameters, building regulations, and asset lifecycle asset tracking. Exceptional stakeholder management skills, with the ability to communicate technical risks and maintenance disruptions clearly to senior leadership and estate users. Working Conditions & Additional Information Travel: Ability to travel efficiently between multi-site property locations across the North East region. Flexibility: Occasional evening or weekend oversight may be required to monitor major project works or system shutdowns. Participation in an out-of-hours on-call engineering escalation rota may be required. To Apply If you are an available, North East-based Hard FM leader looking for a an immediate start, apply online today or contact Astrid Camacho for more information.

Excellent opportunity for a Senior Product Safety Engineer to join a growing specialist engineering organisation delivering advanced defence and maritime technology solutions. This is a key technical leadership role focused on ensuring products and systems are safe, compliant and certifiable throughout the project lifecycle click apply for full job details

Wolviston Management Services are recruiting on behalf of Tioxide Materials Ltd for 4 Laboratory Shift Analysts to join the team at their manufacturing facility in Greatham, Hartlepool, please see details below; Job Purpose: The Laboratory Shift Analyst provides a 24/7 analytical service to plant teams and other site functions, ensuring routine and non-routine testing is completed accurately, reliably and in a timely manner. The role works in accordance with approved work instructions, quality and environmental management systems, supporting the production of safe, high-quality product through accurate analysis, timely reporting, appropriate escalation and effective laboratory control. Roles and Responsibilities: Analytical Testing & Sample Preparation: Complete routine and non-routine analytical testing, sample preparation and laboratory analysis for in-process materials, raw materials, final product, trial samples, customer complaint samples, environmental samples and investigation samples. Safety & Compliance: Maintain high standards of laboratory safety, housekeeping and compliance, using COSHH and Zero Harm tools and participating in laboratory safety communications and cross-functional meetings. Results Interpretation & Reporting: Interpret, record, input and report analysis results accurately and promptly, escalating out-of-specification, non-conforming or trend-related concerns that may impact product, material or environmental quality. Sample Management: Ensure appropriate samples are taken in accordance with sample schedules, liaising with plant teams to request samples and escalating issues where samples are delayed or not received. Technical Knowledge & Development: Maintain and develop working knowledge of relevant management systems, manufacturing processes, laboratory methods and analytical techniques to support reliable testing and continuous self-development. Equipment Care & Maintenance: Take responsibility for the use, care, maintenance, inspection, calibration, troubleshooting and servicing of laboratory equipment, particularly during nightshift and weekend working. Documentation & Continuous Improvement: Review, update and improve laboratory documents, including work instructions, procedures, schedules and other controlled documentation. Waste Management & Sustainability: Support laboratory waste management, sustainability and cost control requirements, including the disposal of final packed pigment, while demonstrating behaviours that support a positive values-based culture. Experience and Qualifications: Essential Relevant scientific, engineering or technical qualification, or equivalent relevant industrial experience. Experience working within a laboratory, testing or technical environment in an analytical role. Working knowledge and practical experience of quality and environmental management systems. Applied knowledge and understanding of analytical test methods and associated laboratory techniques. Experience interpreting, recording and reporting analytical results accurately and in a timely manner. Ability to identify out-of-specification results, non-conforming results and quality trends, and escalate appropriately. Good understanding of laboratory safety, COSHH requirements, housekeeping standards and safe working practices. Ability to work effectively on a shift basis as part of a 24/7 operational laboratory service. Ability to follow approved working instructions, procedures and sample schedules. Strong communication skills and ability to work collaboratively with plant teams, laboratory colleagues and shift managers. Desirable Experience working in a chemical, process, manufacturing or high-hazard industrial environment. Experience in X-ray fluorescence, colour spectroscopy and particle size measurement techniques. Experience supporting customer complaint, environmental or investigation sample analysis. Experience maintaining, calibrating or troubleshooting laboratory equipment. Experience updating laboratory work instructions, procedures or schedules. Experience supporting an Emergency Response Team or incident control room activity. Experience providing operational cover or supporting plant teams during site services activity, plant downtime or quiet periods. Benefits We offer a Workplace Pension Scheme via Legal & General, there is a 4% minimum employee contribution, the company will match your own contributions up to a maximum of 8%. We also allow employee Additional Voluntary Contributions to help you save for the future. Private Medical Insurance (optional), Life Assurance and Income Protection are all included as contractual benefits with us, providing desired security where it matters most. About the Organisation Tioxide manufactures premium-performance titanium dioxide (TiO2) pigments, marketed under the TIOXIDE and DELTIO brands, and supplied to customers worldwide across a range of essential applications. Headquartered in Stockton-on-Tees in the UK, Tioxide combines more than 50 years of manufacturing heritage with advanced technical expertise, strong customer partnerships, and a commitment to continuous innovation. As a wholly owned subsidiary of LB Group, the world's leading TiO2 pigment and titanium sponge manufacturer, Tioxide is entering an exciting new chapter. As the business continues to evolve, we are welcoming new talent to help build on our strong heritage and contribute to our future success. At Tioxide, you'll have the chance to make a real impact in a business where people work together, take ownership, deliver on their commitments and continually look for better ways of doing things. Whether you're starting your career or bringing years of experience, you'll be joining a business with a proud history, a supportive team and a clear vision for the future.

Graduate Electrical Estimator (Commercial/Industrial) Bradford £28,000 - £35,000 + Enhanced Pension + Early Finish on a Friday + Training + Progression Are you a recent graduate or junior professional from a technical background, looking to kickstart your career in electrical estimating within a growing and well-established company? Do you want to work as a Graduate Electrical Estimator for a company experiencing continued expansion, where you will play a key role in supporting project delivery while developing your technical knowledge and commercial awareness through full training and mentorship? On offer for the successful Graduate Electrical Estimator is the opportunity to be fully trained and develop your skills through structured support, gaining hands-on experience across the full lifecycle of projects from initial enquiry through to project completion. You will work closely with experienced estimators, engineers and project teams, building your confidence while contributing to a diverse range of commercial and industrial projects from an early stage. In this role, the successful Graduate Electrical Estimator will support a wide variety of tasks while developing into a fully-fledged Estimator. You will assist with reviewing client enquiries and preparing technical quotations, ensuring they accurately reflect project requirements. In addition, you will liaise with internal departments, suppliers and external stakeholders to ensure accuracy and coordination throughout the estimating process. On top of this, you will support quality procedures and Health & Safety standards while contributing to continuous improvement within the estimating function. The ideal Graduate Electrical Estimator will come from a relevant technical background, with a keen interest in developing a career in estimating or the electrical engineering sector. Ideally, but not essentially, you will have some knowledge of electrical installations, control systems, power distribution or associated engineering disciplines. On top of this, you will have strong organisational, analytical and communication skills, alongside being computer literate, particularly in Microsoft Excel, with a proactive and detail-oriented approach to work. The Role: Support preparation of technical quotations and cost estimates Assist with reviewing specifications and project documentation Liaise with internal teams, suppliers and external stakeholders The Person: Relevant technical or engineering background or degree Interest in electrical estimating or project delivery Proficient in Microsoft Excel Reference Number: BBBH26725H If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job is not quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

This is a fantastic opportunity to join Marshall Land Systems ( and their team of Electricians , manufacturing and installing electrical circuits and communication systems into mobile workspaces and various electrical products and equipment based at their new site in Merthyr Tydfil (postcode is CF48 4DR). Initially this is a contract role with a strong possibility of becoming permanent with Marshall Land. 40 hours a week The role is responsible for the installation of cabling, wiring, and electro-mechanical components into deployable shelters, under the supervision of Red Seal Industrial Electrician. Duties: Assemble and install electrical components into deployable shelters using engineering drawings and associated design data Read schematic drawings and service manuals to determine work procedures Operate standard equipment including but not limited to various testing tools Assemble and install component pieces using hand and power tools Adhere to all Health and Safety, and Quality policies and procedures Participate in the creation of job instructions, operating procedures Participate in continuous improvement activities Other duties as assigned by the Supervisor - Components & Assembly Employment Requirements: Essential: Qualification in 18th edition essential Prior Electrical Installation experience Minimum three years' experience in a manufacturing environment Strong communication, interpersonal, and organizational skills Available to work overtime as required Desirable: NVQ Level 3 or higher qualification in Electrical Engineering or similar discipline City & Guilds 2365 Level 2/3 Diploma in Electrical Installations (Building & Structures, or equivalent electrical qualification) Understanding of lean manufacturing principles including 5S, Kanban and SMED preferred Knowledge of computer software such as Microsoft Excel/Word, Outlook About Marshall Land Syttems Based in the UK, with operations in Canada, Marshall Land Systems specialises in the design and production of deployable operational infrastructure and mission support for humanitarian, defence and security operations across the globe. Other core services include the integraion of complex systems into a range of vehicles for use by the military and security services including explosive ordnance disposal and battlefield ambulances all underpinned by a full in-life managed service provision to ensure customers' equipment is available where and when they need it Recognising the RESTRICTED nature of the work suitable candidates will be baseline level (BPSS) clearable or eligible for this level of clearance

Job Description About the Role The Business Development Manager - Europe & Africa is responsible for identifying, developing, and securing new business opportunities across assigned markets within NOV's XL Systems business. Reporting to the Regional Sales Manager, this role focuses on new customer acquisition, market expansion, and long-term strategic growth across Europe and Africa. Acting as the front end of NOV's growth engine, you will engage with operators, senior decision-makers, and strategic partners to identify and shape early-stage opportunities, influence project specifications, and position NOV's XL Systems solutions as the preferred choice for conductor, casing, and connector applications. Qualified opportunities will be transitioned to the Account Management team for execution and delivery. Success in this role will be measured by the quality of opportunities created, strategic market positioning, pipeline development, and contribution to sustainable business growth across the region. About the Company NOV delivers technology-driven equipment, systems, services, and software solutions supporting energy production and industrial operations worldwide. Through a global network of engineering, manufacturing, and service facilities, NOV helps customers improve safety, efficiency, reliability, and operational performance. XL Systems, part of NOV's Energy Products & Services segment, is a leading provider of conductor, casing, and connector solutions supporting some of the world's most demanding offshore and onshore energy projects. With manufacturing facilities in Batam, Indonesia and Beaumont, Texas, and commercial operations supporting customers globally, XL Systems combines engineering expertise with industry-leading technology to deliver innovative solutions for the energy sector.\ What We Offer Private healthcare, pension scheme, life assurance, and critical illness cover Gym membership support and cycle-to-work scheme Flexible working arrangements with remote working options within the UK Ownership of a strategically important region spanning Europe and Africa Exposure to senior decision-makers within major international energy operators Opportunities to work across global engineering, manufacturing, supply chain, and commercial teams Industry-leading technical training and product development opportunities Long-term career progression into senior commercial, regional leadership, and global business development roles International travel and exposure to diverse energy markets Key Responsibilities Identify, develop, and secure new business opportunities across Europe and Africa to support regional growth objectives Build and maintain relationships with operators, EPCs, drilling contractors, and key industry stakeholders Develop market intelligence and identify emerging opportunities, customer needs, and competitive activity Position XL Systems products and solutions for inclusion in customer specifications and tender opportunities Generate and maintain a robust pipeline of qualified opportunities aligned with strategic growth targets Collaborate with engineering, manufacturing, supply chain, and commercial teams to support opportunity development and customer engagement. Present technical and commercial value propositions to senior customer stakeholders and decision-makers Utilise CRM systems to manage customer activity, opportunity tracking, forecasting, and reporting Represent NOV and XL Systems at customer meetings, industry events, and conferences Support the successful transition of qualified opportunities to Account Management teams for execution and ongoing customer support Desired Responsibilities Contribute to regional business development strategies and market-entry initiatives Support broader commercial improvement initiatives and cross-functional growth projects Provide market insights and customer feedback to support product development and strategic planning activities Qualifications & Skills Essential Qualifications Demonstrated business development experience within the Oil & Gas industry Strong understanding of OCTG products, large OD conductor and casing systems, and connector solutions Proven track record of identifying and developing new business opportunities and customer relationships Experience engaging with senior customer stakeholders and influencing commercial outcomes Proficiency with Microsoft Office 365 applications, including PowerPoint, Excel, Word, and Teams Experience using CRM systems for opportunity management and sales pipeline development Strong commercial awareness and understanding of complex sales cycles Full UK work authorisation (visa sponsorship is not available for this position) Ability and willingness to travel extensively throughout Europe and Africa Desired Qualifications Degree, HND, or Business Diploma in an Engineering-related discipline Previous experience working within an OEM environment Established network of contacts within energy operators and key industry stakeholders Knowledge of European and African Oil & Gas markets Experience supporting strategic market-entry and regional growth initiatives Additional commercial, sales, or business development qualifications Soft Skills To be successful in this role, you will demonstrate: Exceptional relationship-building and networking skills A proactive, self-driven approach with the ability to work independently Strong strategic thinking and market assessment capabilities Commercial acumen and customer-focused decision making Resilience and persistence when pursuing new business opportunities Excellent communication, presentation, and influencing skills Strong organisational and planning abilities A collaborative mindset with the ability to work effectively across global teams High levels of initiative, ownership, and accountability Why Join Us? This is an opportunity to drive business growth across one of the world's most dynamic energy regions while working with industry-leading technology, global teams, and customers that shape the future of the oil and gas industry. At NOV, you will have the autonomy to build relationships, influence strategic opportunities, and create meaningful business impact across a large and diverse region. You will work alongside experienced commercial, engineering, and operational teams while developing expertise in highly specialised products and solutions. Whether your ambition is to become a regional commercial leader, expand into global business development, or broaden your exposure across international energy markets, NOV provides the platform, support, and opportunities to help you achieve your career goals. About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.

Technical Services Manager (Mechanical) Location: Surrey Salary: Competitive + Benefits Job Type: Full Time, Permanent The Opportunity We are seeking an experienced Technical Services Manager to lead the delivery of mechanical engineering and maintenance services within a complex and critical facilities environment in Surrey. This is an excellent opportunity for a mechanically biased engineering professional to oversee operations and maintenance activities, ensuring the safe, compliant, and efficient performance of critical plant and infrastructure. The successful candidate will lead engineering teams, manage specialist contractors, and drive continuous improvement across all aspects of service delivery. Key Responsibilities Lead the delivery of technical and mechanical services, ensuring operational excellence and high levels of customer satisfaction. Act as the primary escalation point for technical and operational issues, ensuring timely and effective resolution. Drive continuous improvement through the implementation of best practice maintenance standards and operational procedures. Manage and supervise the Operations & Maintenance team, including workload allocation, training, development, and performance management. Ensure planned preventative maintenance (PPM) and reactive maintenance activities are completed in accordance with agreed schedules. Oversee Appointed Person duties and Safe Systems of Work (SSoW) across all maintenance activities. Maintain accurate and accessible engineering documentation, including drawings, O&M manuals, SOPs, MOPs, EOPs, and statutory records. Coordinate specialist contractors and vendors, ensuring all works are delivered safely, efficiently, and in compliance with site requirements. Support project delivery, contractor procurement, technical evaluations, and lifecycle planning activities. Ensure compliance with all health, safety, environmental, statutory, and client-specific requirements. Monitor KPIs, service performance, and maintenance compliance, providing regular operational reports. Support critical maintenance activities, plant shutdowns, isolations, and permit-to-work processes. Participate in emergency response activities and provide out-of-hours support when required. About You To be successful in this role, you will be a mechanically focused engineering leader with extensive experience managing maintenance operations within a critical or highly regulated environment. Essential Skills & Experience Minimum five years' experience in technical services, estates, facilities management, or building services environments. Proven experience managing engineering and maintenance teams. Recognised mechanical apprenticeship with HNC/HND, City & Guilds, NVQ Level 3 or equivalent qualification in Mechanical Engineering or Building Services. Strong knowledge of mechanical building systems, including ventilation, steam systems, pumps, pressurisation systems, water services, and effluent treatment plant operations. Experience managing critical engineering infrastructure within regulated environments. Strong understanding of Safe Systems of Work, permit-to-work systems, risk management, and high-risk maintenance activities. Experience managing subcontractors, service partners, and specialist vendors. Strong working knowledge of Computerised Maintenance Management Systems (CMMS) and work order management processes. Ability to interpret technical documentation, engineering drawings, procedures, and statutory guidance. Excellent leadership, communication, organisational, and problem-solving skills. Desirable Experience Experience within healthcare, pharmaceutical, manufacturing, laboratories, or other critical facilities environments. Knowledge of specialist clinical ventilation systems, decontamination facilities, clean environments, steam generation systems, and medical gases. Experience implementing engineering best practice within mission-critical environments. Working towards a Bachelor's or Master's degree in Mechanical Engineering or a related discipline. Willingness to undertake Authorised Engineer responsibilities for mechanical systems. What You'll Receive Competitive salary and comprehensive benefits package. Opportunity to work within a technically challenging and highly regulated environment. Ongoing professional development and training. Clear career progression opportunities. A supportive and collaborative working culture focused on safety, innovation, and operational excellence.

Wolviston Management Services are recruiting on behalf of Tioxide Materials Ltd for 5 Packing Technicians to join the team at their manufacturing facility in Greatham, Hartlepool , please see details below; Job Purpose: The overall purpose of the Packing Technician is to ensure the safe and efficient running of the finished product packing unit to achieve the business targets, complying with our Zero Harm and PSM policies by working collaboratively as a member of the Shift Packing Technician team. Roles and Responsibilities: Packing Operations: Conduct the routine operation of Auto Packing as part of a wider shift team, demonstrating strong self-drive and a willingness to develop understanding of the packing systems and processes. Communication & Production Support: Establish communication with the Process Shift Lead, detailing any issues which may result in deviations from the production plan. Ensure actions from production meetings and Plant Manager instructions are implemented within the Auto Packing area. Equipment Monitoring & Investigation: Perform routine monitoring of the Integra 25kg Bag Packing Machines through visual inspection and PLC controls. Identify process deviations, investigate potential causes, and implement and record remedial actions where required. Compliance & Safety: Perform all duties in compliance with business conduct policies, site guidelines, Life Saving Rules and Corporate Compliance requirements, maintaining the highest standards of safety at all times. Training & Competence: Achieve and maintain competence through training, validation and revalidation activities, including forklift truck certification where required. Zero Harm Culture: Ensure a Zero Harm mindset is applied to all packing area activities through strict adherence to site safety procedures, including the FLT Halo system. Operational Excellence: Follow operating instructions and procedures to ensure the packing plant is operated safely, efficiently and effectively, supporting achievement of production objectives. Equipment Reliability & Team Support: Monitor equipment performance and report defects to support timely repair and replacement. Provide support to Warehouse Technicians when required to maintain operational efficiency. Experience and Qualifications: Essential Experience in a manufacturing, packing, warehouse or production environment. Capability to attain a forklift licence. Basic computer literacy, with the ability to use production systems, PLC/HMI screens or electronic reporting tools. Good communication skills, including effective shift handover and escalation of issues. Desirable Relevant manufacturing, warehousing, logistics, process operations or engineering qualification. Experience of automated packaging lines. Previous FLT experience. Benefits We offer a Workplace Pension Scheme via Legal & General, there is a 4% minimum employee contribution, the company will match your own contributions up to a maximum of 8%. We also allow employee Additional Voluntary Contributions to help you save for the future. Private Medical Insurance (optional), Life Assurance and Income Protection are all included as contractual benefits with us, providing desired security where it matters most. About the Organisation Tioxide manufactures premium-performance titanium dioxide (TiO2) pigments, marketed under the TIOXIDE and DELTIO brands, and supplied to customers worldwide across a range of essential applications.

Electrical Design Engineer Manchester, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals.With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors.At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make:People - Our staff are our core asset. Individually and collectively, they are critical to the success of our vision.Organisation - We are engaged, loyal, and accountable in achieving our goals.Work - Working safely is not just a policy, it is our responsibility.Ethics - We embrace honesty, integrity, and respect, doing the right thing every time.Reputation - We strive for excellence in our processes, enabling us to achieve best-in-class industry standards.We are currently looking for an Electrical Design Engineer to join our team on a full-time, permanent basis. The Benefits - Competitive salary- 25 days' annual leave plus bank holidays and public holidays- Enhanced Holiday Entitlement based on length of service- Company pension scheme with an attractive employer contribution percentage- Private healthcare scheme- Life Insurance- Employee Assistance Programme- Cycle to Work Scheme- Career development opportunities- Continued investment in employee training to further enhance knowledge, expertise and creativityThis is an excellent opportunity for an experienced Electrical Design Engineer to join our Design team and support the delivery of engineering projects through the production of electrical designs, drawings and technical documentation.You will be joining a collaborative team, working across projects involving LV and HV electrical networks, power generation and distribution systems, as well as supporting the Projects, Sales and Service departments.So, if you are looking for a position where you can apply your electrical engineering experience across a range of projects, read on and apply today. The Role As an Electrical Design Engineer, you will design and develop LV and HV electrical networks, power generation and distribution systems, as well as DC systems for BESS projects.You will produce electrical designs and technical documentation, develop LV/HV protection schemes, undertake cable sizing and prepare specifications for switchboards, transformers and other electrical equipment.Working closely with colleagues, clients, DNOs and suppliers, you will support multi-discipline projects, helping to maintain the timely flow of technical information and carrying out site visits to support design progress and as-built updates. About You To be considered as an Electrical Design Engineer, you will need:- To hold a City & Guilds Level HND - Electrical Engineering- To have a minimum of 5 years' experience within a construction or engineering background- To have proficiency in AutoCAD, with experience using it to produce accurate electrical drawings- To have demonstrable experience with Trimble / Amtech- To have effective IT skills and competence in the use of Microsoft Office Packages- To hold a full current driving licenceHours of Work: 8:30AM - 5:00PM Mon - Thurs & 8:30AM - 4:00PM Friday.Other organisations may call this role Electrical Engineer, Power Systems Engineer, Electrical Systems Engineer, LV/HV Design Engineer, or Electrical Power Systems Engineer.The closing date for applications is 4:00pm on Tuesday, 25th August 2026.Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment.We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship.)So, if you are ready to join us as an Electrical Design Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency.

Major Works Project Manager - Canary Wharf Contract: Permanent Hours: 40 per week, Monday to Friday Work from home: Once per week (Friday) Duties & Responsibilities Lead on all stages of project delivery from feasibility, concept and design and manage through to completion and sign-off. The range of projects include internal/external refurbishments, dilapidation and improvement works, M&E systems, insurance works and ad-hoc surveying activities. The range of projects will vary between self-delivery and appointment of an independent/specialist services. Conduct feasibility studies to determine project scope, estimated cost and forecast programme. Carrying out building, condition and measured surveys, defect diagnosis and report writing. Provide project management and contract administration for major works and long-term projects as required. Work to commercial targets for income generation. Other responsibilities include, but not limited to: Lead on project commencement activities for long term maintenance and capital expenditure projects including carrying out building, condition and measured surveys in order to compile scope of works and assist with the development of project specifications. Advise on legal obligations and standards in order to factor requirements into project specification. Advise on requirements for upgrade and major overhaul and refurbishment project works on M&E systems and plant. Preparation of Invitation to Tender packs and lead on negotiation and analysis of tender submissions. Appoint and manage external consultants and specialists as required including third-party building surveyors, structural surveyors, quantity surveyors, etc. Preparation of Schedule of Works and Valuation Schedule. Review M&E dilapidation reports and quoted works alongside the Contracts and Compliance Manager to determine requirements and the most appropriate mode of delivery. Undertake and oversee data collation exercises relating to plant life cycle analysis. Liaise with and advise the Property Management team on the Capital Expenditure Management and coordination of project works from instruction to completion including management of consultants and contractors, management of the project programme and schedule of works, coordination of handover, snagging and asset validation and project sign-off. Required Skills & Experience Highly responsible and decisive with ability to proactively manage own workload. Have strategic expertise and a commercial vision. Comprehensive experience in project management for large scale building projects. Direct experience in schedule preparation and contract administration of building projects. Experience of working in a residential environment (inclusive of high rise) Extensive knowledge of building construction, building services (mechanical and electrical systems) and relevant legislation and standards. Experience in writing works specifications and carrying out competitive tendering exercises. Experience in budget management and working to commercial targets. Educated to degree level in a relevant discipline (building surveying, building services or architecture) or equivalent experience in Building Surveying or a related discipline. Knowledge of principles of fire safety engineering and external wall systems. Member of the Royal Institute of Chartered Surveyors (RICS), Chartered Institution of Building Services Engineers, Chartered Institute of Building or Chartered Association of Building Engineers. Knowledge of facades / external wall systems and principles of fire safety design. Experience with producing and managing multiple projects. Ballymore operates as an equal opportunities employer.

Wolviston Management Services are recruiting on behalf of Tioxide Materials Ltd for a Mechanical Planner to join their engineering team at their manufacturing facility in Greatham, Hartlepool, please see details below: Job Purpose: The Mechanical Planner is responsible for developing detailed, executable maintenance work plans for mechanical maintenance activities across the site. The role ensures all mechanical maintenance work is fully scoped, planned, resourced and prepared prior to scheduling and execution. Working closely with Operations, Engineering, Maintenance Supervisors, Technical Authorities and external parties including OEMs, inspectors and contractors, the Mechanical Planner will improve maintenance efficiency, increase planned maintenance performance, support mechanical asset reliability and minimise plant downtime. The position plays a key role in ensuring the safe, cost-effective and reliable operation of mechanical assets throughout the site. Roles and Responsibilities: Mechanical Maintenance Planning: Develop safe, executable mechanical maintenance plans by defining work scope, priorities, resources, materials, tools and contractor requirements, ensuring work orders are ready for scheduling and effective execution with minimal delay or downtime. SAP Work Management: Create, maintain and improve SAP PM work orders, task lists, job plans, equipment history and planning records, ensuring accurate scopes, resources, spares and material requirements are captured to support effective maintenance execution. Shutdown and Turnaround Planning: Plan shutdowns and major outages by defining work scopes, labour, contractor, material, specialist service, inspection and testing requirements, supporting readiness reviews, progress monitoring, issue resolution and post-outage lessons learned. Spares and Materials Management: Identify and coordinate spares and materials requirements for maintenance work, working with Stores to confirm availability, support critical spare reviews, optimise inventory and manage equipment life-cycle requirements. Contractor Planning and Coordination: Plan and coordinate contractor requirements for specialist maintenance activities, ensuring scopes, mobilisation, site access, permits and work pack requirements are clearly defined and aligned with contract management processes. Reliability Improvement: Support reliability improvement by reducing reactive maintenance, contributing to failure investigations, developing plans from reliability reviews and improvement projects, improving maintenance strategies and strengthening maintenance planning processes. Safety, Environmental and Compliance Responsibilities: Ensure maintenance plans meet safety, environmental, permit-to-work, statutory inspection, COMAH and site engineering compliance requirements. Promote safe working practices through effective planning and preparation. Experience and Qualifications: Essential HNC/HND in Mechanical Engineering or equivalent technical discipline and/or 5+ years' experience in maintenance planning/scheduling. Significant maintenance planning experience within chemical, process, manufacturing, energy or heavy industrial environments. Experience using SAP PM or equivalent maintenance management systems. Strong understanding of mechanical maintenance practices and equipment. Experience planning maintenance activities in a high-hazard operating environment. A good working knowledge of pressure system inspections Desirable COMAH site experience. Experience with maintenance practices of rotating equipment. Reliability-Centred Maintenance (RCM) knowledge. APMP, IAM, SMRP or equivalent maintenance qualification Shutdown and turnaround planning experience. We offer a Workplace Pension Scheme via Legal & General, there is a 4% minimum employee contribution, the company will match your own contributions up to a maximum of 8%. We also allow employee Additional Voluntary Contributions to help you save for the future. Private Medical Insurance (optional), Life Assurance and Income Protection are all included as contractual benefits with us, providing desired security where it matters most. About the Organisation Tioxide manufactures premium-performance titanium dioxide (TiO2) pigments, marketed under the TIOXIDE and DELTIO brands, and supplied to customers worldwide across a range of essential applications. Headquartered in Stockton-on-Tees in the UK, Tioxide combines more than 50 years of manufacturing heritage with advanced technical expertise, strong customer partnerships, and a commitment to continuous innovation. As a wholly owned subsidiary of LB Group, the world's leading TiO2 pigment and titanium sponge manufacturer, Tioxide is entering an exciting new chapter. As the business continues to evolve, we are welcoming new talent to help build on our strong heritage and contribute to our future success. At Tioxide, you'll have the chance to make a real impact in a business where people work together, take ownership, deliver on their commitments and continually look for better ways of doing things. Whether you're starting your career or bringing years of experience, you'll be joining a business with a proud history, a supportive team and a clear vision for the future.

We are seeking an organized, technically minded Engineering Planner to join an operations team. In this pivotal role, you will act as the operational heartbeat of our maintenance scheduling, ensuring that our property portfolio runs safely, efficiently, and in strict compliance with statutory legislation. Whether you come from a fast-paced Facilities Management (FM) helpdesk background or have hands-on engineering maintenance planning experience, you will use your practical technical knowledge to schedule, coordinate, and track Planned Preventative Maintenance (PPM) and compliance works. You will bridge the gap between field engineers, helpdesk dispatchers, and clients to ensure top-tier service delivery. Key Responsibilities PPM & Maintenance Scheduling: Proactively plan, schedule, and coordinate all Planned Preventative Maintenance (PPM), servicing, and statutory compliance works across commercial and residential properties. Engineering Resource Allocation: Assign work orders to mobile engineering teams and specialist subcontractors based on trade, technical skill set, geographical location, and priority SLAs. Technical Quality Control: Utilize your technical understanding to review job sheets, asset reports, and engineering notes, ensuring maintenance works meet high standards. Workflow & Helpdesk Coordination: Triage incoming maintenance requests, manage reactive repairs, and ensure seamless communication between clients, tenants, and field technicians. Compliance & Asset Tracking: Maintain accurate digital logs of statutory testing (e.g., Gas Safety, EICR, Fire Alarms, HVAC) to ensure 100% audit readiness and regulatory adherence. SLA & Contractor Management: Monitor schedules to ensure all maintenance tasks and reactive callouts are completed well within agreed Service Level Agreements (SLAs). What We Are Looking For Relevant Experience: Proven planning and coordination experience gained within either a fast-paced FM helpdesk environment or an engineering maintenance planning/scheduling role. Technical Know-How: A solid understanding of building services, hard FM operations, or core engineering systems (electrical, mechanical, HVAC, or fire & life safety). Planning & Systems Acumen: Exceptional organizational skills with experience managing complex master schedules and computerized maintenance management systems (CAFM / CMMS). Communication Skills: Confident dealing with technical engineers, contractors, and corporate clients alike, with a calm and proactive approach to problem-solving. Compliance Mindset: Strong attention to detail and a rigorous approach to health and safety compliance tracking. If you are interested in the role apply online today or contact Astrid Camacho for more information.

Building Services Manager Location: Catterick Garrison Contract: 12 months Employment: PAYE only We are currently recruiting for an experienced Building Services Manager to join a major construction project at Catterick Garrison on an initial 12-month contract. This is an excellent opportunity for an experienced MEP professional to take a lead role in the delivery of building services across a complex project, with responsibility spanning pre-construction, design, procurement, installation, testing, commissioning and handover. The Role As Building Services Manager, you will take ownership of the building-services delivery strategy and work closely with project, design, commercial and supply-chain teams to ensure MEP works are delivered safely, efficiently and to the required quality, programme and compliance standards. Key responsibilities will include: Reviewing tender and project information to identify MEP risks, opportunities, capability and resource requirements. Leading building-services inputs into project strategy, including design deliverables, procurement, programme and commissioning. Coordinating mechanical and electrical design, procurement, installation, testing and commissioning activities. Managing building-services programmes and mitigating the impact of resequencing, acceleration and late information. Working closely with design and commercial teams to align scopes, fees, design responsibilities and risk allowances. Reviewing buildability and driving value engineering and effective risk mitigation. Coordinating multidisciplinary teams, specialist subcontractors and supply-chain partners. Supporting Principal Contractor duties and ensuring relevant duty holders understand their responsibilities. Ensuring appropriate mechanical and electrical safe systems of work, energisation readiness and live-working controls are in place. Implementing and monitoring QMP, ITP, RAMS and Testing & Commissioning Plan requirements. Ensuring inspections, witnessing, certification, commissioning records, as-builts and snagging are completed ahead of handover. Supporting delivery of O&M manuals, end-user training, seasonal commissioning and aftercare requirements. Providing clear progress reporting and maintaining strong communication with project stakeholders. Challenging unsafe practices and unresolved technical or compliance risks. Driving right-first-time delivery, continuous improvement and successful project outcomes. About You We are looking for an experienced Building Services Manager with a proven track record of delivering medium-sized or moderately complex projects from pre-construction through to completion and handover. You will ideally have: Strong experience in building services / MEP project delivery. A background managing both mechanical and electrical building-services packages. Experience working through the full project lifecycle. Strong understanding of design management, procurement, installation, commissioning and handover. Experience managing multidisciplinary teams and specialist supply-chain partners. Good knowledge of construction health & safety, CDM and duty-holder responsibilities. Strong understanding of quality assurance, inspection and testing and commissioning requirements. Excellent programme, coordination and project-control skills. The ability to engage confidently with clients, consultants, subcontractors and internal project teams. Strong commercial and risk awareness with the ability to identify opportunities as well as mitigate risk. Excellent communication, leadership and problem-solving skills. This role would suit a Building Services Manager who is already operating at a strong project level and is looking to take on a significant delivery challenge, or someone demonstrating readiness to progress towards Senior Building Services Manager responsibilities. Additional Information 12-month contract Catterick Garrison PAYE engagement only No security clearance required prior to starting Candidates will be required to complete BPSS once on site , including a DBS check If you are an experienced Building Services Manager with the relevant MEP project-delivery background and are interested in a 12-month opportunity at Catterick Garrison, please apply with your latest CV for consideration.

Senior Embedded Software Engineer - Aerospace Our Client, a pioneering leader in the aerospace technology sector, is seeking a highly skilled Senior Embedded Software Engineer to join their innovative team. Operating within a fast-paced and highly specialised industry, they are committed to delivering cutting-edge solutions that ensure safety, reliability, and high-performance standards for aerospace applications. This organisation prides itself on fostering an inclusive and dynamic working environment, where innovation and professional growth are at the forefront. As part of their team, you will benefit from ongoing development opportunities, a collaborative culture, and a reputation for excellence in aerospace engineering. Role Summary This strategic hire is in response to expanding project portfolios and evolving industry safety standards. The successful candidate will play a vital role in the design, development, and testing of embedded software solutions integral to aerospace systems. This is a unique opportunity to influence high-stakes technology that impacts safety and operational efficiency in the aerospace sector. Key Responsibilities Develop and maintain embedded software solutions for aerospace hardware platforms. Port existing real-time operating systems to new processor architectures. Write high-quality, optimised code in C and assembler for safety-critical systems. Conduct rigorous testing and validation in line with industry standards. Collaborate with cross-disciplinary teams to meet project requirements. Produce comprehensive technical documentation for design and testing processes. Ensure all development aligns with relevant safety and quality standards such as DO-178C. Essential Skills & Experience Degree in Engineering, Computer Science, or a related discipline. Proven expertise in embedded software development, specifically in C and assembler. Extensive experience in safety-critical systems within the aerospace or similar sectors. Hands-on experience with RTOS environments, preferably FreeRTOS or similar. Strong understanding of hardware architecture, including ARM Cortex processors. Knowledge of safety standards such as DO-178B/C and IEC 61508. Familiarity with software configuration management and development lifecycle processes. Desirable Skills & Experience Experience working with multicore processor architectures. Knowledge of networking protocols like TCP/IP and UDP. Experience in embedded security practices. Familiarity with MIPS or PowerPC architectures. Awareness of compliance requirements in the aerospace industry. Prior involvement in international projects or teams. Why Join Our Client? Joining this organisation means being part of a cutting-edge aerospace engineering environment that thrives on innovation, technical excellence, and continuous professional development. Extensive training options, international collaboration opportunities, and a clear path for career progression await motivated professionals. Next Steps If you meet the essential criteria and are eager to contribute to high-profile aerospace projects, please submit your CV for consideration. Ensure your application clearly states your current home location, relevant qualifications, and your eligibility to work in the UK. We look forward to hearing from talented professionals ready to make a tangible impact in the aerospace sector. Note: Our Client supports sponsorship for suitably qualified candidates requiring it.

Job Title: Maintenance Contracts Manager - Electrical Compliance Location: Hertford (Hybrid) Salary: 55,000- 65,000 + Car Allowance + Bonus Job Type: Permanent (Full-Time) An excellent opportunity has arisen for an experienced Maintenance Contracts Manager to oversee electrical compliance maintenance services across social housing contracts. You will manage the delivery of emergency lighting, lightning protection, PAT testing, height safety and photovoltaic (PV) maintenance programmes, ensuring contracts are delivered safely, compliantly and in line with KPI and client expectations. Key Responsibilities: Manage electrical compliance maintenance contracts across multiple disciplines. Deliver KPIs, SLAs and statutory compliance targets. Manage budgets, P&L, scheduling and resource planning. Lead supervisors, engineers, administrators and subcontractors. Ensure compliance with CDM 2015 and Health & Safety legislation. Build strong client relationships and drive resident satisfaction. Requirements for the Maintenance Contracts Manager: Experience managing electrical compliance maintenance contracts within social housing or regulated residential environments. Strong knowledge of emergency lighting, PAT testing, lightning protection, height safety or PV systems. Previous experience managing teams, budgets and subcontractors. Excellent client-facing, organisational and leadership skills. Full UK Driving Licence. Benefits: Competitive salary. Car allowance. Discretionary bonus. Private healthcare contribution and life assurance. 25 days annual leave plus bank holidays. Ongoing training and career development. If you are interested in this role, please apply to the advert or send your CV for further information. Tags: Maintenance Contracts Manager, Electrical Compliance Manager, Electrical Maintenance, Social Housing, Emergency Lighting, PAT Testing, Lightning Protection, Height Safety, Photovoltaic, Building Services, Compliance Manager, Facilities Management, Operations Manager, Housing Association LON123

Senior NPD Technologist Location: County Durham Package: up to 37,000 plus 1-day WFH Are you an experienced food innovator with a passion for bringing exciting products to market? We're looking for a Senior NPD Technologist to play a key role in developing and launching new products across retail and branded portfolios, while driving continuous product improvement and innovation. This is a fantastic opportunity to join a fast-paced food manufacturing environment, leading projects from concept through to launch and working closely with commercial, technical, procurement and production teams. The Role As a Senior NPD Technologist, you'll take ownership of a varied portfolio of NPD, EPD, value engineering and ingredient-led projects. You'll be responsible for turning customer briefs into commercially viable products, leading factory trials and ensuring successful product launches. You'll also support and mentor junior team members and act as a key link between development, technical, procurement and commercial functions. Key Responsibilities Lead the development of new and improved food products from concept to launch. Translate retailer and customer briefs into innovative, commercially viable products. Conduct market and trend research to identify new opportunities. Develop and reformulate recipes to meet customer, technical and financial requirements. Source and evaluate new ingredients alongside procurement and technical teams. Organise and manage factory trials, product testing and shelf-life validation. Review and approve product artwork and supporting documentation. Support nutritional analysis, product claims and cooking instruction development. Ensure compliance with food safety, allergen and retailer requirements. Manage product launch handovers and cross-functional project meetings. Drive continuous improvement across NPD processes, systems and ways of working. Mentor junior NPD team members and support their development. Deputise for the NPD Manager when required. About You We're looking for someone who combines creativity with strong technical expertise and excellent project management skills. You'll ideally have: Previous experience in an NPD role within food manufacturing. Strong knowledge of product development processes from concept to launch. Experience managing retailer accounts and customer-facing projects. Understanding of thermal processing, shelf-life testing and nutritional compliance. Knowledge of food safety legislation, HACCP and allergen management. Excellent communication and stakeholder management skills. Experience mentoring or managing junior team members. A proactive, innovative and solutions-focused approach. Full UK driving licence. What's in it for you? Opportunity to lead high-profile product development projects. Exposure to major retailers and cross-functional business teams. A varied and fast-paced role with genuine autonomy. Chance to mentor and develop others while progressing your own career. Supportive and collaborative working environment. If you're passionate about food innovation and thrive on seeing products move from idea to supermarket shelf, click apply !

We are looking for a Senior Embedded Software Engineer to develop advanced, real-time software solutions for complex systems. You will be responsible for delivering software from initial concept through to fully verified solutions, working across the full development lifecycle. Key Responsibilities Design, develop, and maintain high-quality software using best engineering practices Take ownership of software development from requirements through to verification and validation Support and enhance existing software in line with evolving project and customer needs Contribute to system architecture, design reviews, and technical decision-making Collaborate with multidisciplinary teams including systems, hardware, and test engineers Provide technical guidance and mentorship to junior engineers Ensure software is developed in line with relevant standards and quality processes Key Skills Strong experience in C++ development (ideally modern C++) Proven experience working across the full software development lifecycle Experience with GUI UX or Human-Computer Interaction (HCI) Knowledge of Python, PowerShell, or other scripting languages Experience in real-time, embedded and safety-critical systems Familiarity with version control, CI and CD, and software testing frameworks Degree in Computer Science, Software Engineering, or a related discipline

Our client, operating in the defence and security sector with a specific focus on the maritime industry, is currently seeking a Site Safety Lead for a permanent position. This role is located at the British Underwater Test & Evaluation Centre (BUTEC), a specialised facility focused on underwater testing and evaluation of various maritime systems. The position offers a unique opportunity to work with cutting-edge technology in a collaborative environment alongside some of the most brilliant minds in the industry. Key Responsibilities: Work in partnership with the Head of Site and Site Compliance Lead to provide competent and professional health, safety and occasional environmental advice to operational and delivery teams Lead the practical implementation and delivery of HSE legislation, policy, strategy and objectives, applying high professional standards and building strong internal networks Engage effectively with internal and external health and safety contacts/stakeholders around the organisation and industry through site visits, remote collaboration, and participation in relevant site meetings Drive safety improvements and changes through training, mentoring, coaching and facilitating Provide advice and support to operational and delivery teams regarding HSE competence assessment, ensuring teams are qualified to meet respective HSE accountabilities and responsibilities Review and close out health and safety incident reports, improving data quality and supporting the investigation/management of environmental incidents as per their significance/impact Job Requirements: Skilled practical knowledge of Safety Management Systems with experience of ISO 45001 Strong knowledge of delivery, operations, and engineering environments Proven experience in leading and implementing change and improving safety outcomes within complex matrix organisations Highly motivated with excellent analytical, engagement, coaching, and influencing skills at all organisational levels Proactive, solution-oriented, and eager to drive change and improvements Excellent written and oral communication skills, capable of prioritising while managing multiple priorities Qualifications: Level 3 or Diploma in Health and Safety or equivalent Experience in managing Health & Safety in the workplace either as an HSE Practitioner or in a related role with key HSE responsibilities Chartered or working towards chartered status with a relevant professional body Recognised training in accident investigation including root cause analysis techniques Benefits: Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal including Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets, and more Proudly supports the Armed Forces community, maintaining Gold Award standard in the Defence Employer Recognition Scheme Volunteering opportunities for supporting charities and the local community This role is 37 hours per week based at the BUTEC site, with a minimum average site attendance of three days per week. If you have the required experience and qualifications, we encourage you to apply now to join our client's dynamic and talented team.

WSR is recruiting for an Operations Manager to join our client based in Milton Keynes Location: Milton Keynes Salary: £70,000 Job Type: Permanent, Full-time WSR is recruiting for an experienced Operations Manager on behalf of a growing manufacturing business based in Milton Keynes. This is a key leadership position responsible for overseeing day-to-day operations and ensuring that people, processes, systems and resources work effectively to deliver excellent customer service, high-quality products, operational efficiency and profitable growth. The successful candidate will lead continuous improvement across production planning, procurement, supply chain, logistics, quality, stock control, compliance and team performance. This opportunity would suit a commercially focused and results-driven operations professional with strong manufacturing, engineering or construction-sector experience. Key Responsibilities Lead day-to-day operations across production, planning and service delivery. Review and improve operational processes, workflows and systems. Monitor performance against KPIs, budgets and service levels. Manage procurement, supplier performance, warehousing, logistics and distribution. Maintain accurate stock levels aligned with customer demand, production requirements and cash-flow targets. Improve forecasting, replenishment and inventory-control processes. Control operational costs and identify opportunities to improve efficiency and margins. Maintain accurate operational reports and dashboards to support decision-making. Use ERP data to identify trends, risks and improvement opportunities. Lead, motivate and develop the operations team. Set clear objectives and performance expectations. Support workforce planning, coaching, delegation and succession planning. Maintain high standards of quality, compliance and health and safety. Key Skills and Experience Previous experience as an Operations Manager or in a similar leadership position. Experience within a manufacturing, engineering or construction environment. Strong knowledge of production planning, procurement, logistics, supply chain, stock control and quality management. Experience using Microsoft Dynamics 365 Business Central, Microsoft Dynamics NAV or a similar ERP system. Proven ability to improve processes, productivity, cost control and operational performance. Strong leadership, communication and stakeholder-management skills. Commercially aware, analytical and confident using operational data. Organised and able to manage competing priorities in a fast-paced environment. A proactive, collaborative and solutions-focused approach. Salary and Benefits £70,000 basic salary. Monday to Thursday, 7:30am-4:00pm. Friday, 7:30am-3:30pm. 23 days' holiday, increasing by one day for each completed year of service up to an additional five days, plus bank holidays. 24 working-from-home days annually following successful completion of probation. Life insurance at three times annual salary. Pension scheme. Free onsite parking. Employee referral scheme. Long-service awards. Employee recognition programme. Please click APPLY NOW , or call the WSR Team at (phone number removed) for more info. We appreciate the time and effort invested in your application. While we strive to respond to all applicants promptly, we kindly ask for your understanding in case of delays. If you do not hear from us within 10 days of submitting your application, please assume that, unfortunately, you have not been successful this time. We will however keep your CV on file and review your suitability against any other vacancies we may have available. .

Software Development Engineer (Control & Autonomy) As a Software Development Engineer, you'll play a key role in designing, developing and delivering autonomy solutions that support complex military aviation systems, helping shape the future of crewed and uncrewed operations. Day-to-day, you'll take ownership of technical work packages, contribute to research and development activities, and support the integration and testing of autonomy and control technologies from concept through to live trials. Your responsibilities will include: Applying software & systems engineering principles to the development of control and autonomy solutions Leading or contributing to algorithm development for autonomous and decision-support systems Developing production-level autonomy software using C, ideally C++, with exposure to Matlab Analysing and modelling uncrewed systems within synthetic environments Supporting hardware integration, testing and formally assessed trials in the UK and overseas Collaborating with multidisciplinary teams and external partners to deliver operational capability Essential experience of the Software Development Engineer (Control & Autonomy): Proven C programming experience, ideally C++, within complex or safety-critical systems Knowledge of systems engineering principles Background in control, autonomy or complex software-based systems Experience with modelling, simulation or algorithm development Essential qualifications for the Software Development Engineer (Control & Autonomy): Degree in a STEM discipline such as Engineering, Physics or Applied Mathematics This role is full time (37 hours per week) based at Farnborough. Travel to other sites, including trial locations in the UK and overseas, will be expected Our Benefits Matched contribution pension scheme, with life assurance Generous holiday allowance, with the option to purchase additional days Options to join Health Cash Plan, Private Medical Insurance and Dental Insurance Employee discount portal: Personal Accident Insurance, Travel Insurance, Restaurants, Cinema Tickets and much more We are proud to support the Armed Forces community by honouring the Armed Forces Covenant and maintaining our Gold Award standard in the Defence Employer Recognition Scheme Volunteering Opportunities - helping charities and local community Please note that all applicants for this role must be eligible for SC clearance, as a minimum.