HGV Workshop Engineer - Reading Early shift We are looking for qualified and time served Heavy Technicians who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. If you are looking for a company that develops their staff, ensures up to date product training and supports you getting various accreditations, then this company is worth your serious consideration. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. Your future employer have been providing first class solutions for many years. It s the standards that are set in the workshop that go a long to ensuring customer satisfaction at the other end. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or EV qualification would be desirable, as would a HGV Class 1 or Class 2 licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Aug 08, 2026
Full time
HGV Workshop Engineer - Reading Early shift We are looking for qualified and time served Heavy Technicians who can demonstrate a thorough understanding of commercial vehicle mechanical dynamics. If you are looking for a company that develops their staff, ensures up to date product training and supports you getting various accreditations, then this company is worth your serious consideration. You can expect to be situated in a positive and vibrant working environment where your efforts will be rewarded. A skills shortage can be trained by way of upskilling. What cannot be trained however is the right attitude and the desire to give your clients a first class service. Your future employer have been providing first class solutions for many years. It s the standards that are set in the workshop that go a long to ensuring customer satisfaction at the other end. You will be carrying out inspections to a varied and diverse fleet. You could be working on main dealer heavy goods vehicles (HGV) refuse collection vehicles, road sweepers, hook loaders, light commercials (vans), trailers and tippers- The type of work you can expect to be carrying out includes (but is not limited to) Routine (and preventative) maintenance MOT preparation Scheduled servicing to DVSA standards 6 (or 8) weekly inspections Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Ideally you will be fully qualified (City & Guilds), NVQ or equivalent. Additional accreditations such as IRTEC or EV qualification would be desirable, as would a HGV Class 1 or Class 2 licence. So what are you waiting for. Get in touch for further details and start that next journey on your career. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
The Role A Number of our clients are looking for experienced Shift Engineers with both a strong Electrical or Mechanical bias to join their Engineering team, based in North Wales This role is ideal for engineers who enjoy hands-on fault finding, preventative maintenance, and driving equipment reliability within a fast-paced manufacturing environment, whilst also potentially going to other sites and repairing and installing equipment. On Offer: £18 - £23 per hour depending on experience Days and shifts available The Role To establish and maintain safe, compliant and effective engineering operations that continually develop the site's asset base by following the Engineering strategy for proactive work whilst responding to breakdowns. Key Responsibilities Perform planned preventative and predictive maintenance across a range of mechanical equipment and complete breakdown repairs in a timely manner to minimise downtime Carry out mechanical fault finding, repair and continuous improvement activities across production and site machinery Support installation, commissioning and modification of mechanical systems and equipment Assessing the need for spares by ensuring that the critical spares and spares list is up to date and stock is at the required levels Escalate any issues in a timely manner to the Engineering Manager Ensuring a safe environment by conducting all servicing and maintenance activities with minimal risk to employees, products and equipment. Champion safety Using root cause analysis on breakdowns to identify actions and drive completion of actions to prevent re-occurrence Support the energy reduction and sustainability agenda to reduce environmental impacts across the site by ensuring all actions are completed Participate in daily and weekly review sessions to drive improvement throughout the site Skills, Experience and Qualifications Qualified or time served in Electrical Engineering disciplines - Desired Mechanical knowledge or multi-skilled experience would be advantageous Strong Electrical fault finding and maintenance experience within a manufacturing environment Experienced in the use and operation of CMMS (Shire) - Advantageous Computer literate with working knowledge of Microsoft Office (Word, Excel, PowerPoint) NEBOSH with a sound knowledge of behavioural safety at a site level - Desirable Legionella and HACCP awareness - desirable Experience in FMCG - desirable Benefits once taken on full time: Overtime Enhanced maternity/paternity Pension: NEST Employee contributions 4.5% / Employer contribution 3.5% - salary sacrifice Other Benefits: Free parking, free electric car charging, Spotify or Netflix subscription, If this sounds like a great opportunity then please send your CV for immediate consideration or call for more details.
Aug 08, 2026
Seasonal
The Role A Number of our clients are looking for experienced Shift Engineers with both a strong Electrical or Mechanical bias to join their Engineering team, based in North Wales This role is ideal for engineers who enjoy hands-on fault finding, preventative maintenance, and driving equipment reliability within a fast-paced manufacturing environment, whilst also potentially going to other sites and repairing and installing equipment. On Offer: £18 - £23 per hour depending on experience Days and shifts available The Role To establish and maintain safe, compliant and effective engineering operations that continually develop the site's asset base by following the Engineering strategy for proactive work whilst responding to breakdowns. Key Responsibilities Perform planned preventative and predictive maintenance across a range of mechanical equipment and complete breakdown repairs in a timely manner to minimise downtime Carry out mechanical fault finding, repair and continuous improvement activities across production and site machinery Support installation, commissioning and modification of mechanical systems and equipment Assessing the need for spares by ensuring that the critical spares and spares list is up to date and stock is at the required levels Escalate any issues in a timely manner to the Engineering Manager Ensuring a safe environment by conducting all servicing and maintenance activities with minimal risk to employees, products and equipment. Champion safety Using root cause analysis on breakdowns to identify actions and drive completion of actions to prevent re-occurrence Support the energy reduction and sustainability agenda to reduce environmental impacts across the site by ensuring all actions are completed Participate in daily and weekly review sessions to drive improvement throughout the site Skills, Experience and Qualifications Qualified or time served in Electrical Engineering disciplines - Desired Mechanical knowledge or multi-skilled experience would be advantageous Strong Electrical fault finding and maintenance experience within a manufacturing environment Experienced in the use and operation of CMMS (Shire) - Advantageous Computer literate with working knowledge of Microsoft Office (Word, Excel, PowerPoint) NEBOSH with a sound knowledge of behavioural safety at a site level - Desirable Legionella and HACCP awareness - desirable Experience in FMCG - desirable Benefits once taken on full time: Overtime Enhanced maternity/paternity Pension: NEST Employee contributions 4.5% / Employer contribution 3.5% - salary sacrifice Other Benefits: Free parking, free electric car charging, Spotify or Netflix subscription, If this sounds like a great opportunity then please send your CV for immediate consideration or call for more details.
PRODUCTION OPERATIVE REQUIRED IN TELFORD (SHROPSHIRE) Are you an experienced Production Operative, Assembly Operative, Manufacturing Operative, Vehicle Fitter, Mechanical Assembler, Joiner, Mechanical Fitter or Workshop Operative looking for a new opportunity in Telford? Join a growing specialist team and play a hands-on role in creating high-quality vehicle conversions. As a Production Operative, you'll be involved in transforming panel vans and cars into finished vehicles that meet exact customer specifications, strict quality standards, and delivery deadlines. With a structured day-shift pattern, ongoing training, and clear opportunities for progression, this role offers a rewarding route into a specialist and growing industry. Based in the Stafford Park area of Telford. This role offers a starting pay rate of £13.00 per hour, rising to £13.50 per hour once fully trained. Working hours are 7:30am-4:30pm Monday to Thursday and 6:00am-12:00pm on Friday, giving a 39-hour working week. What You Will Do: Follow fitting instructions precisely to complete vehicle conversions, including panel vans, cars and 4x4s as part of a dedicated team. Use a range of hand tools and apply mechanical assembly know-how to produce consistent, reliable work. Ensure every stage of work meets required specification, quality checks, and delivery timeframes. Work safely and take care with tools, equipment and vehicle components at all times. Maintain strong time management to support smooth production flow across each shift. Stay flexible in a Production Operative role, stepping in to support other fitting tasks when required. What You Will Bring: Experience of vehicle conversions is a strong advantage, alongside mechanical assembly ability. Comfortable using various hand tools and working to detailed instructions. A confident eye for attention to detail and a pride in quality workmanship. Good time management and the ability to work reliably across the shift pattern. Strong communication skills and a willingness to learn and stay flexible as tasks evolve. As a Production Operative, you'll play a key role in delivering high-quality vehicle conversions. Your work will help keep projects on schedule, maintain high standards, and ensure customers receive a reliable service from start to finish as part of an innovative and growing business. Location: Based in Telford, this Production Operative role supports vehicle conversion operations within a fast-moving, practical production environment. Interested?: If you are ready for a rewarding Production Operative role where quality, teamwork and learning come together, apply now and take the next step in your vehicle conversion career. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Aug 08, 2026
Contractor
PRODUCTION OPERATIVE REQUIRED IN TELFORD (SHROPSHIRE) Are you an experienced Production Operative, Assembly Operative, Manufacturing Operative, Vehicle Fitter, Mechanical Assembler, Joiner, Mechanical Fitter or Workshop Operative looking for a new opportunity in Telford? Join a growing specialist team and play a hands-on role in creating high-quality vehicle conversions. As a Production Operative, you'll be involved in transforming panel vans and cars into finished vehicles that meet exact customer specifications, strict quality standards, and delivery deadlines. With a structured day-shift pattern, ongoing training, and clear opportunities for progression, this role offers a rewarding route into a specialist and growing industry. Based in the Stafford Park area of Telford. This role offers a starting pay rate of £13.00 per hour, rising to £13.50 per hour once fully trained. Working hours are 7:30am-4:30pm Monday to Thursday and 6:00am-12:00pm on Friday, giving a 39-hour working week. What You Will Do: Follow fitting instructions precisely to complete vehicle conversions, including panel vans, cars and 4x4s as part of a dedicated team. Use a range of hand tools and apply mechanical assembly know-how to produce consistent, reliable work. Ensure every stage of work meets required specification, quality checks, and delivery timeframes. Work safely and take care with tools, equipment and vehicle components at all times. Maintain strong time management to support smooth production flow across each shift. Stay flexible in a Production Operative role, stepping in to support other fitting tasks when required. What You Will Bring: Experience of vehicle conversions is a strong advantage, alongside mechanical assembly ability. Comfortable using various hand tools and working to detailed instructions. A confident eye for attention to detail and a pride in quality workmanship. Good time management and the ability to work reliably across the shift pattern. Strong communication skills and a willingness to learn and stay flexible as tasks evolve. As a Production Operative, you'll play a key role in delivering high-quality vehicle conversions. Your work will help keep projects on schedule, maintain high standards, and ensure customers receive a reliable service from start to finish as part of an innovative and growing business. Location: Based in Telford, this Production Operative role supports vehicle conversion operations within a fast-moving, practical production environment. Interested?: If you are ready for a rewarding Production Operative role where quality, teamwork and learning come together, apply now and take the next step in your vehicle conversion career. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Role: Mechanical Fitter / Mechanical Maintenance Engineer Salary: £45,000 to £46,000 per annum plus overtime and opportunities Hours: 4 on 4 off, 6pm till 6am permanent nights Location: Commutable from Crawley, Horsham, Dorking, Worthing, Leatherhead, Billingshurst, Haywards Heath, East Grinstead and surrounding areas Company We are currently recruiting for a Mechanical Fitter / Mechanical Maintenance Engineer to work in a factory environment for a production and manufacturing company. It would suit someone who is mechanically trained and qualified, enjoys a variety of work, willing to learn new skills and above all loves getting their hands dirty. Team fit is very important too, someone who is a team player with strong and clear communication skills. It is a Permanent Night Shift Mechanical Maintenance Fitter / Maintenance Engineer position and therefore require someone who is comfortable and happy to work this shift pattern. If you are a Mechanical Maintenance Engineer or Mechanical Fitter who is looking for a career move or perhaps things have become complacent or you re not getting the rewards and recognition for your hard work, please apply now. Responsibilities Focusing on mechanical maintenance and fitting work across all plant and machinery through fault finding, planned maintenance, shut downs and project work. Working in a dedicated mechanical team, responsible for all mechanics across the factory. Identification of solutions that improve efficiency and reduce costs. Support the handover of work to the opposite shift and ensure works are logged and recorded. To work safely at all times and follow safe systems of work. To be actively involved in the TPM improvement process. To work tidily and make a positive contribution to the 5S system. Requirements Mechanically trained and qualified either through an Apprenticeship or hold mechanical engineering qualifications. Mechanical background in a similar environment, in industrial or production or manufacturing environment. Your job titles may include Mechanical Fitter, Mechanical Maintenance Engineer or Mechanical Technician. We are looking for someone who has SOME of the following mechanical experience; hydraulics, pneumatics, motors, belts, bearings, chains, pumps, gears, welding, machining, fabricating, fault finding and repairs. Friendly and adaptable working attitude, with the hunger to learn and progress Proactive work attitude and keen to get stuck in If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.
Aug 08, 2026
Full time
Role: Mechanical Fitter / Mechanical Maintenance Engineer Salary: £45,000 to £46,000 per annum plus overtime and opportunities Hours: 4 on 4 off, 6pm till 6am permanent nights Location: Commutable from Crawley, Horsham, Dorking, Worthing, Leatherhead, Billingshurst, Haywards Heath, East Grinstead and surrounding areas Company We are currently recruiting for a Mechanical Fitter / Mechanical Maintenance Engineer to work in a factory environment for a production and manufacturing company. It would suit someone who is mechanically trained and qualified, enjoys a variety of work, willing to learn new skills and above all loves getting their hands dirty. Team fit is very important too, someone who is a team player with strong and clear communication skills. It is a Permanent Night Shift Mechanical Maintenance Fitter / Maintenance Engineer position and therefore require someone who is comfortable and happy to work this shift pattern. If you are a Mechanical Maintenance Engineer or Mechanical Fitter who is looking for a career move or perhaps things have become complacent or you re not getting the rewards and recognition for your hard work, please apply now. Responsibilities Focusing on mechanical maintenance and fitting work across all plant and machinery through fault finding, planned maintenance, shut downs and project work. Working in a dedicated mechanical team, responsible for all mechanics across the factory. Identification of solutions that improve efficiency and reduce costs. Support the handover of work to the opposite shift and ensure works are logged and recorded. To work safely at all times and follow safe systems of work. To be actively involved in the TPM improvement process. To work tidily and make a positive contribution to the 5S system. Requirements Mechanically trained and qualified either through an Apprenticeship or hold mechanical engineering qualifications. Mechanical background in a similar environment, in industrial or production or manufacturing environment. Your job titles may include Mechanical Fitter, Mechanical Maintenance Engineer or Mechanical Technician. We are looking for someone who has SOME of the following mechanical experience; hydraulics, pneumatics, motors, belts, bearings, chains, pumps, gears, welding, machining, fabricating, fault finding and repairs. Friendly and adaptable working attitude, with the hunger to learn and progress Proactive work attitude and keen to get stuck in If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information. We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.
Mill Engineer Our market leading client, based in Shipdham, is currently seeking a proactive Mill Engineer . Do you have qualifications in Electrical and Mechanical engineering? Are you an engineer with an enquiring mindset, can do attitude and strong problem-solving skills, who operates with a sense of urgency and purpose (particularly under breakdown pressure)? Are you a seasoned engineer or looking for the next step up to effectively lead and manage a small team of experienced engineers? If the answer is yes, you could be the right candidate for this role. Hours: 4 X 10 hour shifts p/w with Saturday mornings. This is a mix of days and lates (6:00 - 16:30 & 12 00) This is a full time, permanent position, based in Shipdham. The role is a hands-on with an approximate split of 70:30 (70% of the time carrying out maintenance (reactive/proactive) and 30% of the time developing maintenance schedules/planning. Primary accountabilities: To undertake planned preventative maintenance activities and reactive maintenance to ensure optimum efficiency of our animal feeds production plant. To ensure all engineering tasks are undertaken in line with Health & Safety, Quality and Feed Safety Standards. Whilst leading by example to ensure a safe working environment for employees. Observe and report all problem areas on all plant and service, whilst working as a team with all other departments within operations. Implement a preventative maintenance programme throughout the mill. Ensure the full completion of planned jobs to a high standard and report back on jobs not completed. Manage and develop a team - with full responsibility for performance, attendance and day-to-day people management. Investigate and take the necessary corrective actions to resolve any quality issues directly caused or influenced by the mill equipment. Drive continuous improvement across the site. Manage and work alongside subcontractors. Other duties: Responsible for site activity and security during weekend working Maintain a Maintenance Team call out rota and be available for planned Saturday maintenance. Scope of the role: To effectively supervise the day-to-day maintenance staff, activity and tasks ultimately providing continuous production of the mill. The Supervisor role includes working hands on as a fitter with planned time to complete supervisory duties. Experience / Qualifications You must have proven experience in a production environment managing a small team, planning maintenance schedules and working with contractors. 18th Edition You will have a multi-skilled background in Electrical and Mechanical Engineering - NVQ Level 3 / 4 in Electrical Engineering / Electromechanical or equivalent. Remuneration commensurate with skills, qualifications and experience. Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy.
Aug 08, 2026
Full time
Mill Engineer Our market leading client, based in Shipdham, is currently seeking a proactive Mill Engineer . Do you have qualifications in Electrical and Mechanical engineering? Are you an engineer with an enquiring mindset, can do attitude and strong problem-solving skills, who operates with a sense of urgency and purpose (particularly under breakdown pressure)? Are you a seasoned engineer or looking for the next step up to effectively lead and manage a small team of experienced engineers? If the answer is yes, you could be the right candidate for this role. Hours: 4 X 10 hour shifts p/w with Saturday mornings. This is a mix of days and lates (6:00 - 16:30 & 12 00) This is a full time, permanent position, based in Shipdham. The role is a hands-on with an approximate split of 70:30 (70% of the time carrying out maintenance (reactive/proactive) and 30% of the time developing maintenance schedules/planning. Primary accountabilities: To undertake planned preventative maintenance activities and reactive maintenance to ensure optimum efficiency of our animal feeds production plant. To ensure all engineering tasks are undertaken in line with Health & Safety, Quality and Feed Safety Standards. Whilst leading by example to ensure a safe working environment for employees. Observe and report all problem areas on all plant and service, whilst working as a team with all other departments within operations. Implement a preventative maintenance programme throughout the mill. Ensure the full completion of planned jobs to a high standard and report back on jobs not completed. Manage and develop a team - with full responsibility for performance, attendance and day-to-day people management. Investigate and take the necessary corrective actions to resolve any quality issues directly caused or influenced by the mill equipment. Drive continuous improvement across the site. Manage and work alongside subcontractors. Other duties: Responsible for site activity and security during weekend working Maintain a Maintenance Team call out rota and be available for planned Saturday maintenance. Scope of the role: To effectively supervise the day-to-day maintenance staff, activity and tasks ultimately providing continuous production of the mill. The Supervisor role includes working hands on as a fitter with planned time to complete supervisory duties. Experience / Qualifications You must have proven experience in a production environment managing a small team, planning maintenance schedules and working with contractors. 18th Edition You will have a multi-skilled background in Electrical and Mechanical Engineering - NVQ Level 3 / 4 in Electrical Engineering / Electromechanical or equivalent. Remuneration commensurate with skills, qualifications and experience. Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications, we receive I m afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further, we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy.
JOB TITLE: 2 x Mechanical Fitters (Rolling Stock)JOB LOCATION: Cambridge, CambridgeshireSALARY: £29.49 Per hour Umbrella or 22.07 P.A.Y.E. HOURS PER WEEK: 42 Hours per week (4 on 4 off) DURATION: PermanentSHIFT PATTERN: 11 Hours permanent nights working a 4 on, 4 off roster including weekends and bank holidaysWe're proud to be supporting a leading Train Operator as they look for 2 new technicians at the Cambridge Depot Purpose of the role: Deliver highest possible performance as a team member. Deliver customer requirements in accordance with VMI instructions ensuring compliance at all times. Working safely as an individual and as a Team Member. Maintaining tooling and equipment. Managing and fitting materials issued to you using best practice and company guidelines. Maintaining a safe and efficient workplace.Main duties and responsibilities:Mechanical & Electrical overhaul of Rolling Stock to include: Bogie overhaul, damage repair and engineering Wheel set overhaul, repair and analysis Bogie chassis, damage repair and clean Gearbox overhaul, repair and analysis Bogie and gearbox engineering / repair Wheel exchange on wheel sets Re-profiling of wheel sets and wheels Bearing, axle and wheel mounting TBU revision and replacement Components and subassemblies overhaul repair and analysis Re-engineering and production of spare partsResponsibilities Carry out tasks allocated to you in accordance with laid down VMI's and other specified documentation ensuring prompt and safe delivery of vehicles to the customer. Ensure efficient use of tools and materials to deliver services to the customer. Ensure all documentation/paperwork issued relating to the work being carried out is correct in the first instance and completed correctly and fully. Ensure all depot safety and protection systems are complied with; this includes protection of you and others and the wearing of PPE where appropriate to the area being worked in. Where necessary training and competency requirements have been met, operate plant and equipment as required to meet the needs of the business. Comply with company procedures in regard to the use of calibrated tools and equipment. Apply good housekeeping standards throughout the working environment. Ensure efficient communication within the Team and to the Team leader. Partake in briefings and safety tours. Attend training courses to develop your skill base on different types of rolling stock, plant and equipment when required by the company. Work in accordance with the material handling processes in respect of defective components ensuring any removed material, component is labelled correctly. Other duties Working on site at other locations. Assisting other departments where required. Covering absence; sickness and annual leavePLEASE NOTE: All candidates must be able to complete and pass a drugs & alcohol test. Knowledge and experienceYou will be a highly self-motivated individual, able to work under your own initiative. You will possess excellent communication & interpersonal skillsYou will need extensive all-round knowledge of Mechanical EngineeringYou will ideally have knowledge of modern rolling stock systemsYou will ideally have experience of Train depot operations.
Aug 08, 2026
Contractor
JOB TITLE: 2 x Mechanical Fitters (Rolling Stock)JOB LOCATION: Cambridge, CambridgeshireSALARY: £29.49 Per hour Umbrella or 22.07 P.A.Y.E. HOURS PER WEEK: 42 Hours per week (4 on 4 off) DURATION: PermanentSHIFT PATTERN: 11 Hours permanent nights working a 4 on, 4 off roster including weekends and bank holidaysWe're proud to be supporting a leading Train Operator as they look for 2 new technicians at the Cambridge Depot Purpose of the role: Deliver highest possible performance as a team member. Deliver customer requirements in accordance with VMI instructions ensuring compliance at all times. Working safely as an individual and as a Team Member. Maintaining tooling and equipment. Managing and fitting materials issued to you using best practice and company guidelines. Maintaining a safe and efficient workplace.Main duties and responsibilities:Mechanical & Electrical overhaul of Rolling Stock to include: Bogie overhaul, damage repair and engineering Wheel set overhaul, repair and analysis Bogie chassis, damage repair and clean Gearbox overhaul, repair and analysis Bogie and gearbox engineering / repair Wheel exchange on wheel sets Re-profiling of wheel sets and wheels Bearing, axle and wheel mounting TBU revision and replacement Components and subassemblies overhaul repair and analysis Re-engineering and production of spare partsResponsibilities Carry out tasks allocated to you in accordance with laid down VMI's and other specified documentation ensuring prompt and safe delivery of vehicles to the customer. Ensure efficient use of tools and materials to deliver services to the customer. Ensure all documentation/paperwork issued relating to the work being carried out is correct in the first instance and completed correctly and fully. Ensure all depot safety and protection systems are complied with; this includes protection of you and others and the wearing of PPE where appropriate to the area being worked in. Where necessary training and competency requirements have been met, operate plant and equipment as required to meet the needs of the business. Comply with company procedures in regard to the use of calibrated tools and equipment. Apply good housekeeping standards throughout the working environment. Ensure efficient communication within the Team and to the Team leader. Partake in briefings and safety tours. Attend training courses to develop your skill base on different types of rolling stock, plant and equipment when required by the company. Work in accordance with the material handling processes in respect of defective components ensuring any removed material, component is labelled correctly. Other duties Working on site at other locations. Assisting other departments where required. Covering absence; sickness and annual leavePLEASE NOTE: All candidates must be able to complete and pass a drugs & alcohol test. Knowledge and experienceYou will be a highly self-motivated individual, able to work under your own initiative. You will possess excellent communication & interpersonal skillsYou will need extensive all-round knowledge of Mechanical EngineeringYou will ideally have knowledge of modern rolling stock systemsYou will ideally have experience of Train depot operations.
Ernest Gordon Recruitment
Peterborough, Cambridgeshire
Maintenance Fitter (Mechanical) £35,000 - £37,000 + overtime (OTE £42k) + Training + 28 Days Holiday + progression Peterborough Are you a Maintenance fitter from a mechanical background who is workshop qualified looking to join an industry leader offering flexible shift patterns with ongoing tailored training and rapid progression to managerial roles within a year? In this role you will be responsib click apply for full job details
Aug 08, 2026
Full time
Maintenance Fitter (Mechanical) £35,000 - £37,000 + overtime (OTE £42k) + Training + 28 Days Holiday + progression Peterborough Are you a Maintenance fitter from a mechanical background who is workshop qualified looking to join an industry leader offering flexible shift patterns with ongoing tailored training and rapid progression to managerial roles within a year? In this role you will be responsib click apply for full job details
Job Title: Paint Sprayer. Our client, based in Trafford Park, is looking to recruit an experienced Paint Sprayer . We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Rail sector. Paint Sprayer: Main Duties: Prepare and paint train wheels and axles. Using 2 pack airless paint systems. They require a Paint Sprayer with a minimum 2 years experience. Paint Sprayer: Hours of work: 3 shift rotating pattern - Monday to Friday: 06.00 - 14.00 Monday to Thursday, Friday 06.00 - 12 noon. 14.00 - 22.00 Monday to Thursday, Friday 12.00 - 18.00. Nights: 22.00 - 06.00 Monday to Thursday & Friday: 18.00 - midnight. What they are looking for in candidates: Paint Sprayer: Qualifications / Skills/ Experience: Candidates must have experience painting in an engineering / industrial environment. Salary / Hourly Rates: 2 shift rate: £17.34 per hour. 3 shift rate: £18.95 per hour. Benefits Package: 25 days holiday plus BH's. This is a temporary to permanent vacancy. How to apply for the Job Title role: Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful. Our client is a medium sized Engineering workshop. They are now looking for an experienced Airless wet paint sprayer using two pack system. The candidates must have plenty of experience of airless wet paint spraying and preferably in an engineering / industrial environment. You also need to be used to weight measuring paint and hardener. Hours of work. 6-2 & 2-10 Monday to Friday. Friday is 06.00 - 12 noon and 12 noon - 6pm. Nights: 22.00 - 06.00 Monday to Thursday. Friday: 18.00 - 24.00 You must be flexible to work the 3 week rotating shift pattern. To apply for this role please forward your cv in word format. All candidates will need to pass a drugs & alcohol test before starting. We thank all candidates for their applications, however we will only contact applicants who closely meet the criteria of the post. The details of the above position have been kept brief therefore additional duties may be involved as necessary.
Aug 08, 2026
Contractor
Job Title: Paint Sprayer. Our client, based in Trafford Park, is looking to recruit an experienced Paint Sprayer . We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Rail sector. Paint Sprayer: Main Duties: Prepare and paint train wheels and axles. Using 2 pack airless paint systems. They require a Paint Sprayer with a minimum 2 years experience. Paint Sprayer: Hours of work: 3 shift rotating pattern - Monday to Friday: 06.00 - 14.00 Monday to Thursday, Friday 06.00 - 12 noon. 14.00 - 22.00 Monday to Thursday, Friday 12.00 - 18.00. Nights: 22.00 - 06.00 Monday to Thursday & Friday: 18.00 - midnight. What they are looking for in candidates: Paint Sprayer: Qualifications / Skills/ Experience: Candidates must have experience painting in an engineering / industrial environment. Salary / Hourly Rates: 2 shift rate: £17.34 per hour. 3 shift rate: £18.95 per hour. Benefits Package: 25 days holiday plus BH's. This is a temporary to permanent vacancy. How to apply for the Job Title role: Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful. Our client is a medium sized Engineering workshop. They are now looking for an experienced Airless wet paint sprayer using two pack system. The candidates must have plenty of experience of airless wet paint spraying and preferably in an engineering / industrial environment. You also need to be used to weight measuring paint and hardener. Hours of work. 6-2 & 2-10 Monday to Friday. Friday is 06.00 - 12 noon and 12 noon - 6pm. Nights: 22.00 - 06.00 Monday to Thursday. Friday: 18.00 - 24.00 You must be flexible to work the 3 week rotating shift pattern. To apply for this role please forward your cv in word format. All candidates will need to pass a drugs & alcohol test before starting. We thank all candidates for their applications, however we will only contact applicants who closely meet the criteria of the post. The details of the above position have been kept brief therefore additional duties may be involved as necessary.
Job Role: Bench Fitter Location: Hinckley Shift: Monday to Thursday, 08:00 - 16:45; Friday, 08:00 - 12:00 Pay Rate: 16.23 - 16.74 per hour (depending on experience) Benefits: Full-time, permanent role Company pension Free parking On-site parking Sick pay About the Company Our client is a leading manufacturer of aerospace components based in Hinckley. About the Role We are seeking a skilled Bench Fitter to join the manufacturing team. The successful candidate will be responsible for finishing and assembling manufactured parts to specification, using the tools provided and following strict processes and procedures. The role includes part marking, occasional Alocrom (chromate conversion coating) work, carrying out daily checks, creating Standard Operating Procedures (SOPs), and supporting continuous improvement initiatives. The ideal candidate will have excellent attention to detail, good housekeeping standards, and experience using hand and pneumatic tools. Key Responsibilities: Finish manufactured parts to the required specification. Use the tools provided to carry out day-to-day tasks. Assemble components and finished parts. Carry out Alocrom (chromate conversion coating) processes when required. Mark parts using dot-peen and inkjet machines, with occasional vibro-etching. Create Standard Operating Procedures (SOPs). Complete daily equipment and process checks. Follow work routings and manufacturing processes. About You: Excellent attention to detail. Good housekeeping standards. Experience assembling mechanical parts. Experience with part marking. Ability to use hand tools and pneumatic equipment. Ability to work to strict processes and quality standards. Willingness to contribute to continuous improvement activities. Desirable: Familiarity with Rolls-Royce specifications. Familiarity with Rolls-Royce engineering drawings. Apply: To apply for the Bench Fitter position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and the next steps.
Aug 07, 2026
Full time
Job Role: Bench Fitter Location: Hinckley Shift: Monday to Thursday, 08:00 - 16:45; Friday, 08:00 - 12:00 Pay Rate: 16.23 - 16.74 per hour (depending on experience) Benefits: Full-time, permanent role Company pension Free parking On-site parking Sick pay About the Company Our client is a leading manufacturer of aerospace components based in Hinckley. About the Role We are seeking a skilled Bench Fitter to join the manufacturing team. The successful candidate will be responsible for finishing and assembling manufactured parts to specification, using the tools provided and following strict processes and procedures. The role includes part marking, occasional Alocrom (chromate conversion coating) work, carrying out daily checks, creating Standard Operating Procedures (SOPs), and supporting continuous improvement initiatives. The ideal candidate will have excellent attention to detail, good housekeeping standards, and experience using hand and pneumatic tools. Key Responsibilities: Finish manufactured parts to the required specification. Use the tools provided to carry out day-to-day tasks. Assemble components and finished parts. Carry out Alocrom (chromate conversion coating) processes when required. Mark parts using dot-peen and inkjet machines, with occasional vibro-etching. Create Standard Operating Procedures (SOPs). Complete daily equipment and process checks. Follow work routings and manufacturing processes. About You: Excellent attention to detail. Good housekeeping standards. Experience assembling mechanical parts. Experience with part marking. Ability to use hand tools and pneumatic equipment. Ability to work to strict processes and quality standards. Willingness to contribute to continuous improvement activities. Desirable: Familiarity with Rolls-Royce specifications. Familiarity with Rolls-Royce engineering drawings. Apply: To apply for the Bench Fitter position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and the next steps.
I am recruiting an experienced Mechanical Technicians to join a major rolling stock modification project in Burton-on-Trent. No previous rail experience is required.Job title: Heavy Mechanical TechnicianJob location: Burton-On-TrentHourly pay rate: £22.50 Paye / £29.28 UmbrellaHours per week: Average 45 hours per weekShifts: Monday to Friday Days and NightsIndustries considered: Rolling Stock, HGV, Plant, Agricultural Engineering, Aviation, Defence RAF, REME, Army, Navy, Marine, Avionics, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, HGV Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerPosition Summary:This position will be completing heavy mechanical modifications of Rolling Stock Vehicles 221 and 170 units. You will be expected to complete tasks from written work instruction, including Mechanical strips and refits on components. You will also specifically work on modifications of Heavy Diesel engines. This is a Safety Critical position and is a requirement against the Service Agreement (SA). The position is based on a busy maintenance depot and all applicants would be expected to complete the following: Complete Diesel engine repairs Work from written instruction (VMI) Work from Mechanical Engineering drawings, working to specific measurements Replacing mechanical components to correspond to engineering drawings Work flexibly with a maintenance team Bogie exchange Caliper change Axle changes Traction motorsPerson Profile/Experience:No previous rail experience required as we will consider applicants that have worked on any of the following, but you must have Mechanical Maintenance or Diesel Engine experience.Qualifications:Must have Minimum of NVQ Level 3 or Equivalent in an Engineering or Mechanical Discipline Contact Details:PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS AN DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots)Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Aug 07, 2026
Contractor
I am recruiting an experienced Mechanical Technicians to join a major rolling stock modification project in Burton-on-Trent. No previous rail experience is required.Job title: Heavy Mechanical TechnicianJob location: Burton-On-TrentHourly pay rate: £22.50 Paye / £29.28 UmbrellaHours per week: Average 45 hours per weekShifts: Monday to Friday Days and NightsIndustries considered: Rolling Stock, HGV, Plant, Agricultural Engineering, Aviation, Defence RAF, REME, Army, Navy, Marine, Avionics, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, HGV Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerPosition Summary:This position will be completing heavy mechanical modifications of Rolling Stock Vehicles 221 and 170 units. You will be expected to complete tasks from written work instruction, including Mechanical strips and refits on components. You will also specifically work on modifications of Heavy Diesel engines. This is a Safety Critical position and is a requirement against the Service Agreement (SA). The position is based on a busy maintenance depot and all applicants would be expected to complete the following: Complete Diesel engine repairs Work from written instruction (VMI) Work from Mechanical Engineering drawings, working to specific measurements Replacing mechanical components to correspond to engineering drawings Work flexibly with a maintenance team Bogie exchange Caliper change Axle changes Traction motorsPerson Profile/Experience:No previous rail experience required as we will consider applicants that have worked on any of the following, but you must have Mechanical Maintenance or Diesel Engine experience.Qualifications:Must have Minimum of NVQ Level 3 or Equivalent in an Engineering or Mechanical Discipline Contact Details:PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS AN DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots)Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Job title: Heavy Mechanical TechnicianJob location: Burton-On-TrentHourly pay rate: £22.50 Paye / £30.13 UmbrellaHours per week: Average 45 hours per weekShifts: Monday to Friday Days and NightsIndustries considered: Rolling Stock, HGV, Plant, Agricultural Engineering, Aviation, Defence RAF, REME, Army, Navy, Marine, Avionics, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, HGV Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerPosition Summary:This position will be completing heavy mechanical modifications of Rolling Stock Vehicles 221 and 170 units. You will be expected to complete tasks from written work instruction, including Mechanical strips and refits on components. You will also specifically work on modifications of Heavy Diesel engines. This is a Safety Critical position and is a requirement against the Service Agreement (SA). The position is based on a busy maintenance depot and all applicants would be expected to complete the following: Complete Diesel engine repairs Work from written instruction (VMI) Work from Mechanical Engineering drawings, working to specific measurements Replacing mechanical components to correspond to engineering drawings Work flexibly with a maintenance team Bogie exchange Caliper change Axle changes Traction motorsPerson Profile/Experience:No previous rail experience required as we will consider applicants that have worked on any of the following, but you must have Mechanical Maintenance or Diesel Engine experience.Qualifications:Must have Minimum of NVQ Level 3 or Equivalent in an Engineering or Mechanical Discipline Contact Details:PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS AN DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots)Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Aug 07, 2026
Contractor
Job title: Heavy Mechanical TechnicianJob location: Burton-On-TrentHourly pay rate: £22.50 Paye / £30.13 UmbrellaHours per week: Average 45 hours per weekShifts: Monday to Friday Days and NightsIndustries considered: Rolling Stock, HGV, Plant, Agricultural Engineering, Aviation, Defence RAF, REME, Army, Navy, Marine, Avionics, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Mechanical Engineer, Mechanic, HGV Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerPosition Summary:This position will be completing heavy mechanical modifications of Rolling Stock Vehicles 221 and 170 units. You will be expected to complete tasks from written work instruction, including Mechanical strips and refits on components. You will also specifically work on modifications of Heavy Diesel engines. This is a Safety Critical position and is a requirement against the Service Agreement (SA). The position is based on a busy maintenance depot and all applicants would be expected to complete the following: Complete Diesel engine repairs Work from written instruction (VMI) Work from Mechanical Engineering drawings, working to specific measurements Replacing mechanical components to correspond to engineering drawings Work flexibly with a maintenance team Bogie exchange Caliper change Axle changes Traction motorsPerson Profile/Experience:No previous rail experience required as we will consider applicants that have worked on any of the following, but you must have Mechanical Maintenance or Diesel Engine experience.Qualifications:Must have Minimum of NVQ Level 3 or Equivalent in an Engineering or Mechanical Discipline Contact Details:PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS AN DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots)Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Job title: Mechanical FitterJob location: Crewe, CheshireHourly pay rate: £16.87 PAYE / £21.83 UmbrellaShifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts)Hours per week: 37Duration: OngoingStart date: ASAPIndustries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV TechniciansCompany Summary:A global leader in Rolling Stock vehicle manufacturing, service and maintenance.Position Summary:Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Bogie overhaul, damage repair and engineering Wheel set overhaul, repair and analysis Bogie chassis, damage repair and clean Bogie and gearbox engineering / repair Wheel exchange on wheel sets Bearing, axle and wheel mounting Components and sub-assemblies overhaul repair and analysis Re-engineering and production of spare partsTo undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train.Person Profile/Experience:You will be a highly self-motivated individual, able to work under your own initiative.You will possess excellent communication & interpersonal skills.You will need extensive all-round knowledge of Mechanical EngineeringYou will ideally have knowledge of modern rolling stock systems,You will ideally have experience of Train depot operations.Qualifications:Candidates would preferably have a minimum of a NVQ level 2 in a Mechanical discipline Will consider people with 2 years or more in a Vehicle Manufacturing environment or similar industry as training can be provided for the right candidates.Contact Information:Email: Phone: PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject to change as agreed with our client.
Aug 07, 2026
Contractor
Job title: Mechanical FitterJob location: Crewe, CheshireHourly pay rate: £16.87 PAYE / £21.83 UmbrellaShifts: Mon-Fri 8am 4.30pm (with flexibility to work shifts)Hours per week: 37Duration: OngoingStart date: ASAPIndustries considered Rolling Stock, Automotive, Marine, Plant and Aviation, Military, HGV TechniciansCompany Summary:A global leader in Rolling Stock vehicle manufacturing, service and maintenance.Position Summary:Based within the Rolling Stock industry (Trains) we are currently recruiting for Mechanical Engineers to operate out of a Rolling stock depot based in Crewe, to carry out the Mechanical Overhaul of Rail Bogies. Candidates will be required to carry out the following duties: Bogie overhaul, damage repair and engineering Wheel set overhaul, repair and analysis Bogie chassis, damage repair and clean Bogie and gearbox engineering / repair Wheel exchange on wheel sets Bearing, axle and wheel mounting Components and sub-assemblies overhaul repair and analysis Re-engineering and production of spare partsTo undertake all types of Mechanical, repair and replace on Rolling Stock to ensure that we provide our customer with a reliable, safe and defect free train.Person Profile/Experience:You will be a highly self-motivated individual, able to work under your own initiative.You will possess excellent communication & interpersonal skills.You will need extensive all-round knowledge of Mechanical EngineeringYou will ideally have knowledge of modern rolling stock systems,You will ideally have experience of Train depot operations.Qualifications:Candidates would preferably have a minimum of a NVQ level 2 in a Mechanical discipline Will consider people with 2 years or more in a Vehicle Manufacturing environment or similar industry as training can be provided for the right candidates.Contact Information:Email: Phone: PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject to change as agreed with our client.
Job Title: High Level Technician (Rolling Stock)Job Location: DerbyHourly Pay Rate: Days - £22.49 PAYE / £29.23 Umbrella Afternoons £26.09 PAYE / £33.98 Umbrella Nights - £29.91 PAYE / £39.01 Umbrella Saturday - £33.74 PAYE /£40.92 Umbrella (All hours) Sunday - £44.98 PAYE /£54.56 Umbrella (All hour)Shifts: Mon - Fri Days 37 hoursDuration: On-going contractStart Date: ASAPIndustries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerClient Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network.The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems Changing relay boxes / Wiper motorsIf you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to OR call PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject
Aug 07, 2026
Contractor
Job Title: High Level Technician (Rolling Stock)Job Location: DerbyHourly Pay Rate: Days - £22.49 PAYE / £29.23 Umbrella Afternoons £26.09 PAYE / £33.98 Umbrella Nights - £29.91 PAYE / £39.01 Umbrella Saturday - £33.74 PAYE /£40.92 Umbrella (All hours) Sunday - £44.98 PAYE /£54.56 Umbrella (All hour)Shifts: Mon - Fri Days 37 hoursDuration: On-going contractStart Date: ASAPIndustries considered: Rail, Rolling Stock, RAF, REME, Army, Navy, Marine, Avionics, Rolling Stock, Commercial/Industrial Electrics, Defence, Plant Engineering, SPM, HVAC, and Process EngineeringDisciplines considered: Diesel Engine Fitter, Electrical Engineer / Mechanical Engineer, Mechanic, Avionic Technician, Aircraft Engineer, Marine Engineer, Maintenance Fitter, and Breakdown EngineerClient Summary: A world-renowned Rolling Stock vehicle manufacturing, service and maintenance company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: Reporting to the Reliability Shift Manager, as part of a small technical team, you will be required to assist the Fleet Operator to undertake / supervise primarily in the corrective mechanical and electrical maintenance, detailed fault finding and repair on the Class 701 South West Rail fleet of trains. Successful applicants will be responsible for ensuring that any maintenance undertaken at the depot is completed in accordance with the company's processes, procedures and comply with all safety regulations. This is Safety Critical environment and all tasks undertaken will need to ensure that the operator can achieve and maintain the reliability and availability targets set for the trains. The candidate will also assist the Operator when failures occur during service and resolve any issues on the network.The candidate will need to provide high level technical support to the operator which will include: High Level fault finding electrically High Level fault finding mechanically Provide train systems engineering advice for the vehicle as a whole and for the key vehicle systems (such as TCMS - train control system, HVAC, propulsion, brakes, doors, on-train communications etc.) FRACAS - Failure reporting, analysis and corrective action system Produce solutions that provide short term mitigation and long term resolution Monitoring of warranty issues and liaising with supplier technical teams Attending to faulty trains in service, component replacements and modification work Helping customer with root cause analysis using Alstom FRACAS, 8D, PPS methodologies. Ensuring correct replacement parts are sourced Assisting operator in updating of maintenance instructions, overhaul instruction, processes & procedures to optimize maintenance and liaise with Alstom Technical Publications and Central Engineering teams where required Monitoring trains reliability & availability performance and issuing monthly performance reports Monitor of trains in Service using remote monitoring system called Orbita Down load train data from onboard train data recorders using laptops Run diagnostics software to identify faults with various train systems i.e. hydraulic systems, pneumatic systems, train management systems & on board computers. System software updates as required Obsolescence avoidance and mitigation Engineering support for all safety related incidents (NIRs), including representing the Customer with respect to access to Design Authority and equipment OEM's and the production of affirmative closing actions Service Provider representation on Failure Review Boards, feeding back decisions and outputs to the Customer Share experience gained of other fleets across the world which the Service Provider has supplied and/or supports, provision of recommendations and opportunities for design improvements, standardisation and/or modifications. Contribution to Health and Safety on a daily basis. Strong report writing skills. Qualifications: Minimum qualification required - NVQ Level 3 in an electrical discipline. Experience required: Experience within Rail desirable Use of Laptop's and diagnostic tools to determine faults Ability to work from maintenance manuals and schematics Experience of Mechanical or Electrical fault finding Experience of Mechanical or Electrical repairs Troubleshooting and evidence gathering. Person profile: You will be a highly self-motivated individual, able to work under your own initiative You will possess excellent communication & interpersonal skills You will need extensive all-round knowledge of Mechanical Engineering You will need extensive all-round knowledge of Electrical Engineering. This could also include the following: Responsible for accurate completion of all paperwork prior to supervisor validation. Undertake technical maintenance to the required standards. Reliability monitoring reporting Data analysing Rip out and replace electrical components Rip out and replace full or part of large wiring looms Re-install wiring Test Continuity Battery Modifications Repairing or installing Wi-Fi systems Changing relay boxes / Wiper motorsIf you wish to be considered for this role please send your CV including scanned copies of your qualifications and a scanned copy of your passport to OR call PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION.Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.Please note the above job specification could be subject
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Safran Nacelles is a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long-range commercial aircraft. Our expertise covers nacelle design, manufacturing, integration, maintenance and services. Skilled Fitter Burnley 37 Hours per Week On-site - Shifts About the Role Safran Nacelles is looking for skilled and motivated Skilled Fitters to join our Assembly Operations team. Working on a production assembly line, you will assemble aircraft components and structures to the highest standards of quality, safety, and performance. Following engineering drawings, master layouts, and manufacturing instructions, you will carry out precision assembly operations while ensuring compliance with aerospace specifications and customer requirements. This is an exciting opportunity to join a world-leading aerospace manufacturer and contribute to the production of industry-leading aircraft components. Key Responsibilities - Follow and understand engineering drawings, work instructions, and master layouts. - Assemble aircraft components to customer and engineering specifications. - Carry out drilling, riveting, cutting, and fitting operations to fine tolerances. - Install a variety of rivets and fasteners to a high standard of quality. - Produce work that meets engineering definitions and quality requirements. - Work safely and comply with company Health & Safety policies and procedures. - Apply Lean Manufacturing principles to achieve production targets and deadlines. - Maintain high standards of housekeeping and workplace organisation. - Participate in continuous improvement activities and workshops. - Work effectively both independently and as part of a team. - Identify and escalate product quality, process, or safety concerns using company processes. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: - 37 hour working week over 4.5 days with a 1pm Finish on Fridays (Role dependant) - 25 days' holiday + bank holidays (plus the option to buy an additional 5 days) - 10% employer pension contribution (5% employee contribution with the option to increase via salary exchange) - Flex-time scheme that allows you to take two half days or one full day off per month (Role dependant) - 4X life insurance benefit as a member of the pension scheme - Non-contributory BUPA private medical insurance plan (Role Dependant) - Excellent training, education, and development schemes - Enhanced sickness, maternity, adoption and paternity leave - Option to purchase Safran shares with additional free shares from the company - Excellent on-site catering facilities providing subsidised hot and cold meals - Corporate membership at the Crow Wood Hotel & Spa: Use of fitness suites, classes, pool & sauna, offering 54% discount as a gold member. - Wellbeing support through our employee assistance programme: 24/7 mental health support, access to remote GP appointments, medical second options, and physiotherapy - Cycle to work scheme, along with a range of flexible benefits chosen by you! Essential Skills & Experience - NVQ Level 3 or City & Guilds qualification in Engineering, Sheet Metal, Mechanical Engineering, or a related discipline. - Previous experience within a manufacturing or assembly environment. - Ability to read and interpret engineering drawings and technical documentation. - Strong practical skills using hand tools and assembly equipment. - Experience with drilling, riveting, cutting, and assembly activities. - Ability to work accurately to tight tolerances. - Strong communication and teamwork skills. - Good attention to detail and commitment to quality. - Good standard of secondary education. Desirable Skills & Experience - Aerospace manufacturing experience. - Aircraft assembly experience. - Sheet metal assembly experience. - Knowledge of aviation specifications and standards. - Lean Manufacturing and continuous improvement experience.
Aug 07, 2026
Full time
Safran Nacelles is a worldwide leader in aircraft engine nacelles. Our products and services equip all aircraft types; regional, business, short, medium and long-range commercial aircraft. Our expertise covers nacelle design, manufacturing, integration, maintenance and services. Skilled Fitter Burnley 37 Hours per Week On-site - Shifts About the Role Safran Nacelles is looking for skilled and motivated Skilled Fitters to join our Assembly Operations team. Working on a production assembly line, you will assemble aircraft components and structures to the highest standards of quality, safety, and performance. Following engineering drawings, master layouts, and manufacturing instructions, you will carry out precision assembly operations while ensuring compliance with aerospace specifications and customer requirements. This is an exciting opportunity to join a world-leading aerospace manufacturer and contribute to the production of industry-leading aircraft components. Key Responsibilities - Follow and understand engineering drawings, work instructions, and master layouts. - Assemble aircraft components to customer and engineering specifications. - Carry out drilling, riveting, cutting, and fitting operations to fine tolerances. - Install a variety of rivets and fasteners to a high standard of quality. - Produce work that meets engineering definitions and quality requirements. - Work safely and comply with company Health & Safety policies and procedures. - Apply Lean Manufacturing principles to achieve production targets and deadlines. - Maintain high standards of housekeeping and workplace organisation. - Participate in continuous improvement activities and workshops. - Work effectively both independently and as part of a team. - Identify and escalate product quality, process, or safety concerns using company processes. Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: - 37 hour working week over 4.5 days with a 1pm Finish on Fridays (Role dependant) - 25 days' holiday + bank holidays (plus the option to buy an additional 5 days) - 10% employer pension contribution (5% employee contribution with the option to increase via salary exchange) - Flex-time scheme that allows you to take two half days or one full day off per month (Role dependant) - 4X life insurance benefit as a member of the pension scheme - Non-contributory BUPA private medical insurance plan (Role Dependant) - Excellent training, education, and development schemes - Enhanced sickness, maternity, adoption and paternity leave - Option to purchase Safran shares with additional free shares from the company - Excellent on-site catering facilities providing subsidised hot and cold meals - Corporate membership at the Crow Wood Hotel & Spa: Use of fitness suites, classes, pool & sauna, offering 54% discount as a gold member. - Wellbeing support through our employee assistance programme: 24/7 mental health support, access to remote GP appointments, medical second options, and physiotherapy - Cycle to work scheme, along with a range of flexible benefits chosen by you! Essential Skills & Experience - NVQ Level 3 or City & Guilds qualification in Engineering, Sheet Metal, Mechanical Engineering, or a related discipline. - Previous experience within a manufacturing or assembly environment. - Ability to read and interpret engineering drawings and technical documentation. - Strong practical skills using hand tools and assembly equipment. - Experience with drilling, riveting, cutting, and assembly activities. - Ability to work accurately to tight tolerances. - Strong communication and teamwork skills. - Good attention to detail and commitment to quality. - Good standard of secondary education. Desirable Skills & Experience - Aerospace manufacturing experience. - Aircraft assembly experience. - Sheet metal assembly experience. - Knowledge of aviation specifications and standards. - Lean Manufacturing and continuous improvement experience.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Aug 07, 2026
Full time
Job Title: Pipefitter Location: Glasgow, Govan and Scotstoun, Onsite - Must be able to attend a recruitment day in Glasgow Salary: £40,016 - plus 33% shift allowance where applicable Shift Pattern: Days - Mon-Thurs, 07:00-16:30, Nights - Mon-Thurs 20:30-06:00, Weekends - Fri-Sun, 07:00-19:30 Requirements: Modern Apprenticeship / Trade Papers must be provided when submitting your application Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Core duties: You have a Modern Apprenticeship or Trade Papers (SVQ3, City & Guilds or equivalent qualification) You're experienced in pipe manufacture and installation, using the tools and equipment needed on major projects You have solid knowledge of pipefitting methods, safe working practices and trade standard techniques You're able to read and work from engineering drawings, pipework diagrams and technical specifications You understand SHE , COSHH and risk assessment requirements and apply them consistently on the job You've worked as a Pipefitter or in a similar trade within an industrial or commercial environment The Pipefitter Team: Our Pipefitter team is responsible for building and installing the pipework systems that keep our vessels operating at their best. Working across the Clyde on high-profile defence projects, this skilled team combines precision, safe working practices, and proven trade expertise to deliver dependable results. It's a practical environment where pride in craft and quality is at the core of everything they do. As part of the team, you'll contribute to the Type 26 programme, playing a key role in delivering reliable, high-quality pipework on one of the UK's most advanced naval shipbuilding projects. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th August 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
