32 jobs found

MET Technician Location: Enfield Pay Rate: 20 - 22 per hour (DOE) Bonus: 16 per hour on all efficiency hours (hours produced above hours worked) Uncapped earning potential Hours: Monday - Friday, 08:00 - 17:00 Type: Full-time, Permanent About the Role We are a well-established Accident Repair Centre in Enfield looking to recruit an experienced MET Technician (Strip & Fit) to join our workshop team. This is a bodyshop-based role, focused on the strip and refit of vehicles following accident damage. There is also some involvement in mechanical work such as suspension and steering, however this is not a full mechanical/servicing position. Key Responsibilities Strip and refit vehicle components following accident damage Remove and refit: Doors, bumpers, trims, mirrors, lights, panels and interior components Carry out mechanical work where required, including: Suspension, steering, subframes, axles and associated components Assist with braking and chassis-related work (non-engine) Work closely with Panel Beaters and Paint Technicians to ensure smooth workflow Align and refit components in line with manufacturer standards Identify and report any additional damage during strip-down Complete job cards and repair documentation accurately Maintain high standards of quality, safety, and workmanship Candidate Requirements Proven experience as an MET Technician / Strip & Fit Technician / Bodyshop Fitter Strong experience working within an accident repair environment Confident with full vehicle strip and refit Good understanding of suspension and steering systems Mechanical knowledge beneficial (non-engine work) Own tools required Ability to work independently and as part of a team High attention to detail and pride in work Relevant qualifications or time-served experience preferred Full UK driving licence preferred What's on Offer 20 - 22 per hour, depending on experience Monday to Friday 42.5 hours per week - no weekends Stable, long-term opportunity with consistent workload Well-equipped, professional accident repair workshop Supportive and experienced team About Us Streamline Search is a technical recruitment agency based in Chichester, West Sussex, operating across the UK. We are acting as a Recruitment Agency in relation to this vacancy. By applying, you consent to us processing your data in line with GDPR.

MET TECHNICIAN/ STRIP FITTER MET Technician / Strip Fitter details: Salary: £43,000 - £53,000 Working Hours: 7am - 5pm Location:High Wycombe Talented and efficient MET Technician/ Strip Fitter to join this leading team. As a MET Technician / Strip Fitter, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of an MET Technician / Strip Fitter Work efficiently in a fast-paced accident repair centre. Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction. Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this MET Technician role, please contact Skills and state reference job number 53532 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this MET Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: MET Technician, MET Strip Fitter, Strip Fitter, Stripper Fitter, Bodyshop MET, Technician, Mechanic

At Elite Car Body, we've built our reputation over nearly 30 years by doing things the right way. We're a proudly independent, family-run accident repair centre where quality comes before quantity, colleagues look out for one another, and everyone takes pride in the vehicles that leave our workshop. Many of our team have been with us for years, bringing over 140 years of combined experience to the business. As our workload continues to grow, we're looking for an experienced Vehicle Stripper / Fitter (MET Technician) who enjoys being part of a close-knit team and takes genuine pride in producing work to the highest standards. If you're looking to move away from the pressures of a large corporate repair group and join a respected local business where your skills are recognised and valued, we'd love to hear from you. The role Working in our BSI Kitemark (BS10125) approved bodyshop, you'll be responsible for stripping damaged vehicles ready for repair before accurately refitting all mechanical, electrical and trim components to manufacturer standards. You'll work alongside an experienced, supportive team of painters, panel technicians and repair specialists who all share the same goal which is returning every vehicle to its owner in first-class condition. What you'll be doing Removing and refitting mechanical, electrical and trim (MET) components Stripping vehicles ready for repair work Refitting panels, lights, bumpers, interiors and mechanical components Identifying damaged parts requiring replacement Ensuring all work meets manufacturer specifications and BSI standards Carrying out final quality checks before vehicles progress through the repair process Working efficiently without compromising on quality Maintaining a clean, organised and safe working environment About you We're looking for someone who already has experience within an accident repair or bodyshop environment and enjoys working as part of a professional team. You'll ideally have: Proven experience as a Vehicle Stripper/Fitter or MET Technician Excellent mechanical aptitude and fault-finding skills Pride in producing high-quality workmanship A positive attitude and willingness to support colleagues Strong attention to detail Reliability and a good work ethic A full UK driving licence (preferred) ATA or NVQ qualifications are welcomed but are not essential. Your experience, attitude and quality of work are what matter most. Why join Elite Car Body? We're large enough to offer a busy, modern workshop with a consistent flow of work, but small enough that everyone knows each other and works together. When you join us, you'll benefit from: Competitive salary, depending on experience Permanent, secure employment with a respected independent local business A friendly, supportive and highly experienced workshop team Modern equipment and repair facilities Consistent insurance and private repair work Ongoing investment in training and development Plenty of overtime opportunities 20 days annual leave plus bank holidays and Christmas shutdown A workplace where quality, teamwork and pride in your work are genuinely appreciated Working hours are 8.15am 5.15pm, Monday to Friday (40 hours per week). Join a team where your experience matters. If you're an experienced MET Technician looking for a workshop where you'll be respected, supported and part of a great team, we'd love to hear from you. Please apply. Come and join a local business that values craftsmanship, teamwork and long-term relationships with both our customers and our people. Successful applicants will be invited to complete a paid trial before any formal offer of employment is made.

Mechanical Assembly Fitter Location Bedford Salary £30,000 to £35,000, dependent on experience Job TypeFull-time, Permanent About the RoleWe are currently recruiting for an experienced Mechanical Assembly Fitter to join a leading manufacturer of pumps used within the land drainage, flood defence and sewage industries. Reporting to the Operations Manager, you will be part of a skilled workshop team responsible for the assembly and testing of high-quality pump systems, ensuring customer delivery requirements are met. This is an excellent opportunity for an individual with a strong mechanical background who enjoys working in a hands-on engineering environment and contributing to continuous improvement initiatives. Key Responsibilities Assemble mechanical and electrical components from engineering drawings, Bills of Materials (BOMs) and work instructions to produce completed pump assemblies. Carry out stripping, preparation, termination and continuity testing of electrical cables. Perform mechanical fitting and assembly operations using hand, power and pneumatic tools. Read and interpret engineering drawings, checklists and visual work instructions. Complete dimensional checks, quality inspections and associated production documentation accurately. Operate overhead cranes and forklift trucks to move large and heavy components safely around the workshop. Load and unload vehicles as required. Work to production schedules and delivery deadlines. Maintain a clean, safe and organised working environment. Ensure all tasks are completed in accordance with Health, Safety, Environmental and Welfare procedures. Support continuous improvement activities and other operational projects as required. About YouTo be successful in this role, you will have: Experience & Qualifications Several years' experience in a Mechanical Fitter, Assembly Fitter or similar engineering role. Experience within a medium to heavy engineering or manufacturing environment. Proven ability to work to production schedules and deadlines. Experience reading and interpreting engineering drawings. Experience completing manufacturing, inspection and quality documentation. Good standard of education. Overhead Crane licence/certification desirable (training can be provided). Forklift Truck licence/certification desirable (training can be provided). Good understanding of Health & Safety requirements within a manufacturing environment. Skills & Attributes Strong mechanical aptitude and practical problem-solving skills. Excellent attention to detail. Ability to work independently with minimal supervision. Positive and proactive approach to work. Reliable, trustworthy and dependable. Good verbal and written communication skills. Strong team player with a collaborative attitude. Commitment to continuous improvement and high-quality workmanship. What's on Offer Permanent, full-time position. Opportunity to join an established and market-leading engineering business. Training and development opportunities, including forklift and overhead crane certification where required. Supportive team environment. Varied and challenging hands-on engineering work. If you are an experienced Mechanical Assembly Fitter looking for your next opportunity within a successful engineering and manufacturing environment, we'd love to hear from you.

FINTEC recruit is seeking an experienced Pump Mechanical Fitter to work for an engineering business based in Warrington. This is a permanent position with salary up to circa £40,000 plus benefits, plus on call allowances, regular overtime, bonus scheme, company pension and more. Working 37 hours per week Monday to Friday. On call schedule is 1 week in 4. You will be a qualified & experienced mechanical fitter with experience of maintaining and servicing industrial pumps used within industrial and manufacturing environments. Reporting to the Workshop Manager. Responsibilities: Perform stripping and assessment of rotating equipment, evaluating repairs for spare parts and re-building pumps, gearboxes, fans, and other rotating equipment. Utilize micrometers and internal mics, and employ a DTI to check radial and axial measurements. Attend customer sites and branches to provide workshop support. Liaise with suppliers, complete accurate costing sheets, and collaborate with the supervisor to provide timely quotations. Ensure health, safety, and environmental compliance in all workshop activities. Write comprehensive root cause failure reports. Skills and Experience for the workshop Pump Mechanical Fitter role: Experience in stripping and repairing various pumps, including Centrifugal End suction, Centrifugal Split case, Magnetic drive, PD Rotary lobe, PD Progressive cavity, PD Gear, Liquid ring, and Multi-stage pumps. Good understanding of pump components, such as volute, impeller, driveshaft, wear rings, bearing housing, bearings, and mechanical seals. Proficient in measuring equipment, capable of reading micrometers and internal mics, and using a DTI to check radial and axial measurements. Understanding of bearing and bore fits (e.g., J6/H6), wear ring clearances, and interpreting engineering drawings. Familiarity with laser alignment techniques Hold a current driving licence. Qualified or apprentice-trained with an NVQ Level 3 certification. For further details of the Mechanical Fitter role & to apply, please submit your current CV or apply via our FINTEC recruit website INDH

My client is Berkshire based Prestige Accident Repair Bodyshop - they have 2 Snr MET Technician roles based in Shepperton and Hanworth As a MET Technician / Strip Fitter, you will be repairing luxury / Prestige damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. You will have the responsibility for removing and replacing all the mechanical, electrical and trim components on a wide range of luxury vehicles. If you have previous exposure working as an MET Technician, MET Mechanic, Bodyshop Technician, Bodyshop Mechanic, Bodyshop Technician, Stripper, Fitter or Body Fitter and are currently seeking new career opportunities, we would love to hear from you! Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. Of course, we offer a fantastic basic salary, Fantastic bonus schemes free life assurance pension & save-as-you-earn share scheme We're growing - it's an exciting time for the industry and we're committed to being at the cutting edge

MET Fitter Up to 45,000 Stansted area A well-established automotive restoration and vehicle preparation business is looking to strengthen its team with the appointment of an experienced MET Fitter, Coachwork Fitter, or Strip & Fit Technician. This role offers the opportunity to work on an exceptional variety of projects, ranging from modern vehicles to rare and prestigious heritage cars. Responsibilities will include the stripping, inspection, refurbishment, and reassembly of vehicle components, requiring a meticulous approach and a commitment to high-quality workmanship. The successful candidate will join a highly skilled team dedicated to delivering outstanding standards across restoration, repair, and vehicle preparation projects. Key Responsibilities: Stripping and refitting vehicle body components Removal and installation of doors, wings, bumpers, grilles, lighting systems, trims, and associated fittings Dismantling heritage and classic vehicles for restoration projects Inspecting components for wear, damage, and refurbishment requirements Reassembling vehicles to a high standard following repair or restoration work Working closely with bodyshop, restoration, and paint teams Maintaining quality standards and ensuring all work is completed safely and efficiently The Ideal Candidate Will Have: Previous experience as an MET Fitter, Strip & Fit Technician, Coachwork Fitter, or similar Strong knowledge of vehicle body assemblies and component fitting Experience working on modern vehicles and/or classic vehicles Excellent attention to detail and workmanship standards Ability to work independently and as part of a skilled team A genuine interest in automotive restoration and vehicle craftsmanship What's on Offer: Salary up to 45,000 depending on experience Opportunity to work on a diverse range of modern and heritage vehicles Stable, long-term position with a well-established business Supportive and skilled working environment Exposure to unique restoration and specialist automotive projects If you're an experienced MET Fitter or Coachwork Fitter looking for a role that offers variety, technical challenge, and the opportunity to work on some exceptional vehicles, I'd be keen to speak with you.

MET Technician Location: Tewkesbury Basic Salary: up to £45,000 + Bonus Hours: 40 hour week - flexible start/finish times Job Description: Our client is looking for a talented and efficient MET Strip Fitter / MET Technician to join this leading team. You will be repairing damaged vehicles in line with manufacturers' specifications within a state-of-the-art body shop, utilising modern equipment and techniques. Qualifications Required for an MET Strip Fitter / MET Technician Will have served a recognised apprenticeship as a MET Strip Fitter / MET Technician and gained a technical qualification (such as NVQ / ATA / IMI / SVQ) Must have previous experience working as a MET Technician / MET Strip Fitter within a busy body shop Strong team player with self-motivation to earn bonus hours Experience with Geometry work and 4-wheel alignment Sound up-to-date knowledge of vehicle repair techniques Diagnostic training Duties of an MET Strip Fitter / MET Technician: Work efficiently in a fast-paced accident repair centre Follow correct repair techniques and work to factory specifications Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as required Use diagnostic tools to identify and fix system faults Perform quality checks to ensure work meets industry standards Collaborate with colleagues to ensure smooth workflow Maintain accurate records of work completed Adhere to all safety protocols and industry regulations Click 'Apply Now' if interested in joining this dynamic team. INDLP

MET Technician Cheltenham Up to 55,000 OTE 62,000 + Benefits Team Bonus (Minimum bonus guaranteed every month) Flexible start and finish times Excellent working conditions 29 days annual leave, rising with years of service, private Healthcare plan, progression available, expanding company Enhanced maternity and paternity, Sick pay and more great benefits For more information, please call Callum on: (phone number removed) Exciting Opportunity for an Experienced MET Technician - Join a Leading Automotive Brand We currently have a fantastic opportunity for an experienced MET Technician, Mechanic, Strip and Fitter from an Accident repair background, to join a fantastic employer within the accident repair industry. Our client focusses on quality repairs over rushed repairs and as such are seeking an MET technician who takes pride in the quality of their work. The Job: ATA MET Technician / Mechanic Strip Fitter Remove & refit mechanical and electrical trims / panels / components on vehicles Ensure that stripping and rebuilding work of all vehicles is carried out in a professional and correct manner and that final quality checks are undertaken in line with applicable standards Dismantling vehicles ready for the panel area Carrying out inspections, fault finding and diagnostic work Ordering replacement parts Re-assembling the vehicle with new parts as required to pre-accident condition Stripping and fitting components, bodywork and trim elements All MET duties required within your remit Follow manufacturer repair methods to return vehicles to pre-accident condition Fault finding / Diagnostics Ensure that all jobs are completed within the estimated times If you would like to be considered for the MET Technician job, please call Callum at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more IND123

MET Technician Location: Bishop's Stortford Salary: Basic Salary: £45,000 - £55,000+ DOE OTE: £60,000 Job Type: Full-Time, Permanent Looking for a role where your skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you're an experienced MET (Mechanical, Electrical & Trim) Technician looking for a stable Monday to Friday role with excellent earning potential, this opportunity offers the chance to join a professional Bodyshop that values quality workmanship and invests in its people. With an OTE of up to £60,000, you'll be rewarded for your expertise while enjoying a healthy work-life balance. You'll be joining a well-equipped, modern workshop where teamwork, high standards and continuous improvement are part of the day-to-day culture. Whether you're looking to further develop your technical skills or simply want to work for an employer that appreciates your contribution, this role provides long-term career prospects in a supportive working environment. What's in it for you? Basic salary of £45,000 - £55,000+ depending on experience OTE of up to £60,000 Monday to Friday working hours (40 hours per week) Long-term career stability Modern, well-equipped workshop Ongoing training and development Career progression opportunities Supportive and professional team environment The Role As an MET (Mechanical, Electrical & Trim) Technician, you'll be responsible for carrying out the mechanical, electrical and trim aspects of vehicle repairs, ensuring every vehicle is restored safely and to the highest manufacturer and industry standards. Key responsibilities include: Removing and refitting mechanical, electrical and trim components. Diagnosing faults and carrying out repairs where required. Working alongside Panel Beaters and Paint Technicians to ensure efficient vehicle repair. Completing repairs in line with manufacturer specifications. Ensuring all work meets quality and safety standards. Maintaining accurate records of work completed. Keeping the workshop clean, organised and compliant with health and safety procedures. Contributing to an efficient and productive team environment. About You We're looking for a skilled and motivated MET (Mechanical, Electrical & Trim) Technician who takes pride in producing high-quality work and enjoys working within a busy Bodyshop environment. You should have: Previous experience as an MET Technician, Mechanical, Electrical & Trim Technician, Strip Fitter or Vehicle Dismantler. Recognised apprenticeship or Level 3 qualification in Vehicle Mechanical, Electrical & Trim (NVQ / IMI / SVQ / ATA), with a commitment to continuous professional development. Strong mechanical and electrical diagnostic skills. Experience working within an accident repair or Bodyshop environment. A high standard of workmanship and attention to detail. The ability to work efficiently while maintaining quality. Good communication and teamworking skills. A full UK driving licence. Apply Today This is an excellent opportunity to join a well-established business offering excellent earning potential, modern facilities and genuine long-term career opportunities. If you're an experienced MET (Mechanical, Electrical & Trim) Technician looking for your next challenge in Stansted, we'd love to hear from you. Apply today for immediate consideration. Contact Chris at AutoSkills UK and quote job number 54245.

MET TECHNICIAN/ STRIP FITTER MET Technician / Strip Fitter details: Salary: £45,000 - £60,000 Working Hours: 42.5 per week Location: Swindon Talented and efficient MET Technician/ Strip Fitter to join this leading team. As a MET Technician / Strip Fitter, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of an MET Technician / Strip Fitter Work efficiently in a fast-paced accident repair centre. Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction. Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this MET Technician role, please contact Skills and state reference job number 54407 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this MET Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: MET Technician, MET Strip Fitter, Strip Fitter, Stripper Fitter, Bodyshop MET, Technician, Mechanic

MET Technician (£55,000) Location: Midlands Salary: £60,000+ OTE Hours: Mon-Fri, 42.5h week Extras: 30 Days holiday, Achievable Individual Time Saved Bonuses and many more Our client is looking for a talented and efficient MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician to join a leading team. You will be repairing damaged vehicles in line with manufacturer specifications in a state-of-the-art body shop, using the latest equipment and techniques. Key Responsibilities of an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Work efficiently in a fast-paced accident repair centre Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction Conduct detailed inspections to diagnose mechanical and electrical issues Repair or replace damaged mechanical, electrical, and trim components Disassemble and reassemble vehicle parts as needed Use diagnostic equipment to identify and fix issues in the vehicle's systems Perform quality checks to ensure repairs meet industry standards Collaborate with other team members to ensure efficient workflow Maintain accurate records of all work performed Adhere to all safety protocols and standards Essential Skills and Qualifications for an MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician: Recognised apprenticeship as a MET Technician/ MET Strip Fitter / Car Fitter / Strip & Fit Technician Technical qualification (NVQ / ATA / IMI / SVQ) Previous experience in a busy bodyshop environment Experience with Geometry work and 4-wheel alignment Up-to-date knowledge of vehicle repair techniques Diagnostic training Self-motivated and a strong team player Click 'Apply Now' to take the next step in your career. INDHIGH

MET Technician Exeter Up 49,000 OTE 65,000 + (Base salary negotiable DOE + Bonus) Why join Us? Time Saved Bonus - banked weekly & paid monthly Monday to Friday only Access 30% of your wages in advance every month 29 days annual leave (increasing with service) Clear progression opportunities within an expanding company Enhanced sick pay Plus, many more great benefits For more information, please call Rochelle on: (phone number removed) MET Technician / Strip Fitter We currently have a fantastic opportunity for an experienced MET Technician, Mechanic, Strip and Fitter from an Accident repair background, to join a fantastic employer within the accident repair industry. Our client focusses on quality repairs over rushed repairs and as such are seeking an MET technician who takes pride in the quality of their work. This job role is a Skilled MET Technician position and requires an experienced candidate who can complete all panel repairs to accident damaged vehicles. ATA, NVQ 3 or IMI 3 qualifications would be a distinct advantage. The Job: ATA MET Technician / Mechanic Strip Fitter Remove & refit mechanical and electrical trims / panels / components on vehicles Ensure that stripping and rebuilding work of all vehicles is carried out in a professional and correct manner and that final quality checks are undertaken in line with applicable standards Dismantling vehicles ready for the panel area Carrying out inspections, fault finding and diagnostic work Ordering replacement parts Re-assembling the vehicle with new parts as required to pre-accident condition Stripping and fitting components, bodywork and trim elements All MET duties required within your remit Follow manufacturer repair methods to return vehicles to pre-accident condition Fault finding / Diagnostics Ensure that all jobs are completed within the estimated times If you would like to be considered for the MET Technician job, please call Rochelle at Clear Automotive on (phone number removed) or email your CV for an immediate interview. We are also recruit for the following positions nationally: Panel Beater, Panel Technician, MET Technician, Bodyshop Mechanic, Vehicle Painter, Vehicle Paint Sprayer, Vehicle Prepper, Paint Prepper, Bodyshop Technicians, Accident repair, Vehicle body repair, coach builder, VDA, Vehicle Damage Assessor, Bodyshop Estimator, Vehicle Technician, Workshop Controller, Bodyshop Controller, SMART Repairer and Bodyshop Managers, Production Manager and more IND123

MET TECHNICIAN/ STRIP FITTER MET Technician / Strip Fitter details: Basic Salary:£47,000 Working Hours:Monday - Friday 8am - 6pm, Saturday available 9am - 4pm Location:Greenhithe Talented and efficient MET Technician/ Strip Fitter to join this leading team. As a MET Technician / Strip Fitter, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of an MET Technician / Strip Fitter Work efficiently in a fast-paced accident repair centre. Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction. Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this MET Technician role, please contact Skills and state reference job number 52140 As well as this MET Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: MET Technician, MET Strip Fitter, Strip Fitter, Stripper Fitter, Bodyshop MET, Technician, Mechanic

Job Title: Skilled Fitter Location: Hamble, Southampton Flexible Opportunities: Fully onsite Rate: £35.66/hour (Umbrella - Inside IR35) Working hours: Early shift: 7am-5pm (flexible to 6am-4pm), approx. 50 hrs/week with potential overtime on Fridays and weekends, subject to supervisor approval and rest requirements. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're working with a major name in Aerospace seeking Skilled Structural Fitters to support military aircraft production. If you have a solid background in structural assembly and heavy build work, this is a great opportunity to join a high-performing team. What will I be doing? As a skilled Fitter, you'll be hands-on with structural sub-assemblies, jigs, and components-bringing precision and pace to every job. Key Responsibilities: Stripping, repairing, and assembling complex aircraft structures and components Drilling, riveting (solid/percussion), and fitting skins on metallic assemblies Working from engineering drawings, tech documents, and route cards Using hand and power tools to complete builds to tight tolerances Maintaining your AO stamp and signing off your own work Supporting production targets and mentoring junior operators as needed Maintaining high standards in quality, safety, cost, and housekeeping What do I need to succeed? You're reliable, quality-focused, and used to delivering in fast-paced, production-driven environments. You'll need to be comfortable working on your feet and taking ownership of your work from start to finish. Essential: Recent experience in aircraft production (not just maintenance) Strong structural fitting skills including jig work, drilling, and riveting Ability to interpret technical drawings and route cards NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual work on the shop floor Additional skills (preferred but not essential): Experience with composite and metallic structures Familiar with lean practices such as 5S and continuous improvement Own a complete personal toolkit (a strong sign of experience - although site tools are provided) What's my next step? If this sounds like the role for you, we'd love to hear from you. Click apply to share your details and join a team that's building something exceptional.

Job Title: Skilled Fitter Location: Southampton Shifts: 2 Earlies / 3 Lates (Weekly Rotation) Rates & Hours: Earlies: £22.23 PAYE / £30.56 Umbrella 06:00-14:15 (Mon-Thu), 06:00-12:00 (Fri) Lates: £25.94 PAYE / £35.66 Umbrella 14:15-22:30 (Mon-Thu), 12:00-18:00 (Fri) Contract: Ongoing - Long-Term Opportunity Due to the nature of the work, BPSS clearance is required. Only UK nationals or eligible applicants will be considered. Failure to obtain or maintain clearance may impact employment. Who We Are & What's on Offer We're looking for experienced Skilled Fitters - Falseworks to join a high-performance aerospace team, working on the A350 programme. You'll be part of the crew assembling and repairing high-precision structures using falsework-think jigs, cradles and custom frameworks designed to align large components like fuselage sections, wings or tanks during build. This is precision work with real impact. If you're methodical, hands-on, and serious about aerospace, this is your next step. What You'll Be Doing As a Skilled Fitter - Falsework Assembly, you'll operate as part of a skilled manufacturing team, reporting to the Flow Leader and collaborating with Engineering, Quality, and Planning to ensure all targets are hit safely, on time and to spec. Your day-to-day will include: Structural Assembly & Precision Work Experienced in stripping, repairing, and assembling aircraft structures with precision hand-fitting, drilling, and fastening to tight tolerances. Technical Interpretation & Documentation Skilled in reading engineering drawings, repair schemes, and completing work route cards ensuring full traceability. Surface Treatment & Systems Installation Proficient in applying seals, coatings, and assembling aircraft pipework to industry standards. Testing & Quality Assurance Competent in performing alignment, pressure, and electrical bonding tests while strictly adhering to safety, quality, and lean processes. What You'll Need to Succeed You'll be a hands-on engineer with strong technical know-how, a problem-solving mindset and the drive to deliver high-quality work every shift. Essential: Qualifications & Experience: NVQ Level 3 (or equivalent) in Engineering/Manufacturing or time-served apprenticeship with significant aerospace assembly experience (metallic/composite). Technical Skills: Strong understanding of technical drawings, engineering documentation, and confident computer use for documentation. Work Ethic & Practices: Excellent hand skills, attention to detail, able to work independently or in teams, and familiar with 5S, lean principles, and safe workshop practices. Desirable: Current expertise in aerospace fitting skills with strong manual handling awareness. Positive, can-do attitude and a strong work ethic suited for a physically active role. Why Apply? Join a leading aerospace programme where your skills matter. Apply now, take ownership, thrive under pressure, and help shape the future of flight.

2 x Earlies / 3 x Lates Earlies: 22.23 PAYE or 30.56 UMB - 06:00-14:15 (Mon-Thu) / 06:00-12:00 (Fri) Lates: 25.94 PAYE or 35.66 UMB - 14:15-22:30 (Mon-Thu) / 12:00-18:00 (Fri) Role Summary Working as part of an established team within the A350 department. This role is skilled and will undertake to strip, repair and assemble aircraft components and sub-assemblies. As a Skilled Operator, your role has an increased level of self-management, empowerment and a disciplined outlook to your everyday working. Skilled status also carries the responsibility for problem solving, team working and a will to succeed with the business. Essential Responsibilities EHS - Promote a safe workplace environment without risk to health and minimising the impact to the environment. Ensure that all Environmental, Health and Safety policies, procedures, rules and regulations are adhered to and that all accidents and incidents are reported Clocking and Booking - Ensure that all required clockings (time and attendance) and bookings (job costings) are made in an accurate and timely manner Housekeeping - Ensure that workstations are kept clean and maintained, with all tools and equipment stored correctly. Uphold a clear desk policy Quality - Ensure that all Quality standards, processes and procedures are complied with. All work is completed with care and attention minimising wastage Cost Management - Support cost reduction and management initiatives through reducing unnecessary expenditure Knowledge & Skills - Keep knowledge and training up to date for necessary operations to the best of your knowledge and belief to achieve specification and acceptable standards for your role. For example, Approved Operator (AO) stamp(s) to be kept up to date Team Working - Must actively participate in team meetings and be prepared to share knowledge, coach and mentor trainees when required, be willing to be trained in other areas Any other reasonable duties that fall in line with the level of the role Role Specific Duties Will include but is not limited to: Reporting directly to the section Flow Leader, participate within a team and work with functional specialists (such as engineering, Quality, etc) to ensure production requirements are achieved safely, on time and to the customer specifications Read and follow work instructions, specifications and part drawings (accessed via PC) Read and interpret engineering data, technical drawings, specifications, repair schemes, Manufacturing Procedures (MPs) and other approved maintenance data Accurately complete work route cards to maintain component traceability Measuring and marking out of materials to carry out close tolerance hand fitting processes Precision drilling, countersink, reaming and finishing of holes in aircraft structure assemblies Application of assembly techniques including riveting, mechanical fasteners and other bonding processes Sealing and jointing techniques for environmental protection and painting, alocrome of aircraft structures Application of bush and bearing installation Application of part mark on aircraft assemblies/sub-assemblies Assembly of pipework for various types of aircraft Alignment, pressure, electrical bonding testing and functional testing Preferred Candidate Requirements NVQ Level 3 or equivalent in Engineering or Manufacturing, or Time-served apprenticeship in allied trades Numeracy, literacy and IT skills, and able to read and understand technical documentation, including via computer/IT equipment Good planning and problem- solving skills Working understanding of the 5 S and lean principles Strong work ethic supported by a real positive attitude to succeed Excellent communication skills Demonstrate the currency and competency of the key skill codes required within department Great attention to the detail and accuracy of the task requirement Proven ability to actively participate in a team culture. To be able to work with minimal supervision Shift working required There are certain aspects of this role that require mechanical / manual lifting of parts so some lifting will be required and applicants must be capable of undertaking activities with appropriate assistance if required. Desirable Qualifications / Experience Previous experience of manufacture of complex metallic and composite structures Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security.

MET TECHNICIAN/ STRIP FITTER OTE: £45,000 - £55,000 MET Technician / Strip Fitter details: Salary: £37,000 - £40,000 Working Hours: 8-5 Monday - Friday (Flexible Start) Location: Liverpool Talented and efficient MET Technician/ Strip Fitter to join this leading team. As a MET Technician / Strip Fitter, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of an MET Technician / Strip Fitter Work efficiently in a fast-paced accident repair centre. Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction. Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this MET Technician role, please contact Skills and state reference job number 52004 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this MET Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: MET Technician, MET Strip Fitter, Strip Fitter, Stripper Fitter, Bodyshop MET, Technician, Mechanic

MET TECHNICIAN/ STRIP FITTER OTE: £65,520 MET Technician / Strip Fitter details: Salary: £43,680 Working Hours: Monday to Friday - 8 Hours- Between 5am - 5:30pm Location: Birmingham Talented and efficient MET Technician/ Strip Fitter to join this leading team. As a MET Technician / Strip Fitter, you will be repairing damaged vehicles in line with the manufacturers' specifications within a state-of-the-art Bodyshop, utilising modern equipment and techniques. Responsibilities of an MET Technician / Strip Fitter Work efficiently in a fast-paced accident repair centre. Follow the correct repair techniques and produce work in line with factory specifications and customer satisfaction. Skills and Qualifications of an MET Technician / Strip Fitter You will have served a recognised apprenticeship as a MET Technician / Strip Fitter and gained a technical qualification (such as NVQ / VCQ / SVQ / ATA). You must have previous experience working as a MET Technician / Strip Fitter within a busy body shop and be a strong team player with a self-motivation to earn bonus hours. You will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques. If you think you are a good fit for this MET Technician role, please contact Skills and state reference job number 51768 Don't worry if your CV is out of date. Get in touch and we can work that out later. As well as this MET Technician role, Auto Skills UK is recognized as the leading provider of temporary and permanent staffing solutions, from productive trades to senior management and are always looking for candidates within the Bodyshop including: MET Technician, MET Strip Fitter, Strip Fitter, Stripper Fitter, Bodyshop MET, Technician, Mechanic

Service Engineer - An exciting opportunity has become available for an experienced diesel mechanic to join a reputable company. Salary up to £36,000 DOE plus company van. The Company: You will be joining a reputable hire company who provide a range of plant, heating and pump equipment to various sectors. Due to their ongoing success, they are now seeking a service engineer to join their established team who is able to keep up with the demands on the company. Benefits of the Service Engineer: Overtime available Early finish on Friday 25 days holiday plus Bank Holidays Mobile Phone Fully kitted van Training and Career Progression Up to £36,000 basic On call rota paid at additional rates Respsonbilities of the Service Engineer: As the Service Engineer, you will be a key member of the mobile team responsible for maintaining, repairing, and servicing a range of hire equipment such as generators, pumps and diesel engines. Carrying out complete strip downs and overhauls on customer machines on site Have knowledge of risk assessments, method statements, and Health & Safety During quieter periods, you will be required to assist the engineering team within the workshop. Key Skills: Full UK driving license. You will previous diesel engine, pump hire or generator hire experience. You will previously have worked as a generator engineer, service engineer, diesel mechanic, field service engineer, mobile engineer or mobile fitter. Apply now or contact Georgina on (phone number removed) to find out more on this Service Engineer opportunity!