Critical Facilities Engineer (Shift Lead) Key Points Location: Dundee, Scotland (Onsite) Position: Permanent Salary: £50,500 to £58,500 per annum Shift Pattern: 24/7 Shift Environment Overview We are seeking experienced Critical Facilities Engineers (Shift Leads) to support the operation and maintenance of essential mechanical and electrical infrastructure within a high-availability data centre environment. As the engineering lead on shift, you will be responsible for ensuring critical power, cooling, and life-safety systems operate safely and reliably while supervising technicians and coordinating first-response activities during incidents. This is an excellent opportunity for experienced engineers from data centres, hospitals, utilities, manufacturing, or other mission-critical environments looking to progress their careers within a rapidly growing sector. Key Responsibilities Lead all engineering activities during designated shift periods, acting as the senior technical representative within a live mission-critical environment. Operate, monitor and maintain critical electrical and mechanical infrastructure including UPS systems, standby generators, HV/LV distribution equipment, switchgear, transformers, PDUs, CRAC/CRAH units, chillers, pumps and associated building services plant. Perform routine inspections, operational checks and condition monitoring activities to ensure the reliability and availability of critical infrastructure. Coordinate and oversee planned preventative maintenance activities, ensuring all work is completed safely and in accordance with approved procedures. Respond to infrastructure alarms, equipment failures, power events and cooling incidents, taking ownership of fault diagnosis, escalation and service restoration activities. Act as the first point of technical escalation during critical incidents, ensuring effective communication, coordination and resolution. Carry out fault-finding and troubleshooting across electrical, mechanical and control systems, identifying root causes and supporting long-term corrective actions. Support and participate in switching operations, isolations and maintenance activities in accordance with site safety procedures and operational standards. Review, author and execute maintenance procedures, permits to work, risk assessments, Methods of Procedure (MOPs), Standard Operating Procedures (SOPs) and Emergency Operating Procedures (EOPs). Supervise technicians, specialist vendors and contractors working within live critical environments, ensuring compliance with site standards and safe systems of work. Utilise DCIM, BMS and environmental monitoring platforms to assess infrastructure performance, identify emerging risks and support operational decision making. Maintain accurate shift logs, maintenance records, incident reports and asset documentation, ensuring all activities are correctly recorded and communicated during shift handovers. Support capacity management, power utilisation reviews and cooling performance monitoring to ensure infrastructure remains resilient and fit for future growth. Assist with root cause analysis investigations following equipment failures or operational incidents, implementing corrective and preventative actions where required. Drive high standards of operational excellence, housekeeping, safety and regulatory compliance throughout the facility. Support emergency response activities and business continuity procedures to maintain the availability and resilience of critical services. Mentor junior engineers and technicians, sharing technical knowledge and helping to develop the next generation of critical facilities professionals. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Aug 12, 2026
Full time
Critical Facilities Engineer (Shift Lead) Key Points Location: Dundee, Scotland (Onsite) Position: Permanent Salary: £50,500 to £58,500 per annum Shift Pattern: 24/7 Shift Environment Overview We are seeking experienced Critical Facilities Engineers (Shift Leads) to support the operation and maintenance of essential mechanical and electrical infrastructure within a high-availability data centre environment. As the engineering lead on shift, you will be responsible for ensuring critical power, cooling, and life-safety systems operate safely and reliably while supervising technicians and coordinating first-response activities during incidents. This is an excellent opportunity for experienced engineers from data centres, hospitals, utilities, manufacturing, or other mission-critical environments looking to progress their careers within a rapidly growing sector. Key Responsibilities Lead all engineering activities during designated shift periods, acting as the senior technical representative within a live mission-critical environment. Operate, monitor and maintain critical electrical and mechanical infrastructure including UPS systems, standby generators, HV/LV distribution equipment, switchgear, transformers, PDUs, CRAC/CRAH units, chillers, pumps and associated building services plant. Perform routine inspections, operational checks and condition monitoring activities to ensure the reliability and availability of critical infrastructure. Coordinate and oversee planned preventative maintenance activities, ensuring all work is completed safely and in accordance with approved procedures. Respond to infrastructure alarms, equipment failures, power events and cooling incidents, taking ownership of fault diagnosis, escalation and service restoration activities. Act as the first point of technical escalation during critical incidents, ensuring effective communication, coordination and resolution. Carry out fault-finding and troubleshooting across electrical, mechanical and control systems, identifying root causes and supporting long-term corrective actions. Support and participate in switching operations, isolations and maintenance activities in accordance with site safety procedures and operational standards. Review, author and execute maintenance procedures, permits to work, risk assessments, Methods of Procedure (MOPs), Standard Operating Procedures (SOPs) and Emergency Operating Procedures (EOPs). Supervise technicians, specialist vendors and contractors working within live critical environments, ensuring compliance with site standards and safe systems of work. Utilise DCIM, BMS and environmental monitoring platforms to assess infrastructure performance, identify emerging risks and support operational decision making. Maintain accurate shift logs, maintenance records, incident reports and asset documentation, ensuring all activities are correctly recorded and communicated during shift handovers. Support capacity management, power utilisation reviews and cooling performance monitoring to ensure infrastructure remains resilient and fit for future growth. Assist with root cause analysis investigations following equipment failures or operational incidents, implementing corrective and preventative actions where required. Drive high standards of operational excellence, housekeeping, safety and regulatory compliance throughout the facility. Support emergency response activities and business continuity procedures to maintain the availability and resilience of critical services. Mentor junior engineers and technicians, sharing technical knowledge and helping to develop the next generation of critical facilities professionals. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Job Title: Senior Instrument Engineer Job ID: 36854 Location: Seal Sands, Middlesbrough Salary: £60,000 to £65,000 (dependent on experience) Hours: 40 hours per week - flexible working hours core hours Monday to Friday 9:30am to 3:00pm Contract/Permanent: Permanent Site Based/Office/Remote: Site and Office based Start Date: ASAP Benefits: 28 days holiday plus bank holidays Pension is Salary sacrifice 6% and we match up to another 3% Incentive bonus at 2% per quarter Onsite Parking Overview As a key member of the EC&I Team, the Senior Instrument Engineer will be responsible for the design, development, installation, management of all instrumentation and systems across the site. Provide technical support to the maintenance technicians. The Senior Instrument Engineer will support the Manufacturing facilities in production. Contribute and deliver capital projects. Ensure regulatory compliance. Main Tasks and Responsibilities: The Senior Instrument Engineer will development and design of advanced instrumentation and control systems for both new and existing processes. Author and review detailed specifications and comprehensive design documentation for complex instrumentation systems. The Senior Instrument Engineer will supervise and coordinate the installation and commissioning of instrumentation and control system, managing installation contractors and ensuring adherence to project timelines. Conduct thorough site inspections and rigorous testing to verify proper installation and optimal functionality of instrumentation systems. Collaborate closely with multidisciplinary project teams to seamlessly integrate instrumentation systems into overall plant operations. Develop, implement, and oversee maintenance schedules for instrumentation and control systems, ensuring long-term reliability and performance. Diagnose, troubleshoot, and resolve complex issues with instrumentation and control systems, providing expert guidance and support. Lead and actively contribute to HAZOP (Hazard and Operability Study) and LOPA (Layer of Protection Analysis) meetings, ensuring safety and compliance. Maintain meticulous documentation and records in strict accordance with COMAH regulations, ensuring regulatory compliance. Ensure all instrumentation and control systems comply with ATEX directives, providing expert oversight and guidance. Select, install, and validate ATEX-certified equipment in hazardous areas, ensuring safety and compliance. Identify, evaluate, and implement opportunities for process improvements, driving innovation and efficiency within the instrumentation domain. Oversee functional safety activities, including the development of Safety Requirements Specifications (SRS), arranging Functional Safety Assessments (FSA), and performing verification calculations to ensure compliance with safety standards. SHEQ: Ensure that all Health, Safety and Environmental requirements are met including (but not limited to) workplace organization, work instructions, risk assessments, COSHH assessments, housekeeping standards in accordance with GLP and GMP Demonstrable evidence of understanding the importance of creating a safe environment Working in a safe manner Follow appropriate and relevant practices and procedures Team Building & Incentive: Assist in the generation, data collection and monitoring of key performance indicators (KPIs). Organize and deliver SHE related training modules for staff. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Confidentiality: Follow company policies and procedures to keep confidentiality on sensitive information. Skills & Qualifications: Bachelor's degree in Electrical, Instrumentation & Control Systems Engineering, or a related field. Functional safety qualifications (desirable) CompEx Ex12 (Desirable) Strong knowledge of COMAH and ATEX regulations and safety standards. Proficiency in instrumentation and control system design, installation, and maintenance. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities. Proficiency in AutoCAD for designing and drafting instrumentation and control systems. Experience with batch processing systems (Desirable) Familiarity with PLC, DCS, and SCADA systems particularly Siemens PCS7 (Desirable) You have been sent this vacancy list by EC&I Partners. By clicking "accept", we will call you to discuss your current circumstancesand process your application. If you choose to"reject", please add a comment to help us understand why the role isn't for you. If you would like to talk to one of our consultants before making a decision, our phone number is (phone number removed). Please note our office hours are 9am-4pm Monday-Friday.
Oct 03, 2025
Full time
Job Title: Senior Instrument Engineer Job ID: 36854 Location: Seal Sands, Middlesbrough Salary: £60,000 to £65,000 (dependent on experience) Hours: 40 hours per week - flexible working hours core hours Monday to Friday 9:30am to 3:00pm Contract/Permanent: Permanent Site Based/Office/Remote: Site and Office based Start Date: ASAP Benefits: 28 days holiday plus bank holidays Pension is Salary sacrifice 6% and we match up to another 3% Incentive bonus at 2% per quarter Onsite Parking Overview As a key member of the EC&I Team, the Senior Instrument Engineer will be responsible for the design, development, installation, management of all instrumentation and systems across the site. Provide technical support to the maintenance technicians. The Senior Instrument Engineer will support the Manufacturing facilities in production. Contribute and deliver capital projects. Ensure regulatory compliance. Main Tasks and Responsibilities: The Senior Instrument Engineer will development and design of advanced instrumentation and control systems for both new and existing processes. Author and review detailed specifications and comprehensive design documentation for complex instrumentation systems. The Senior Instrument Engineer will supervise and coordinate the installation and commissioning of instrumentation and control system, managing installation contractors and ensuring adherence to project timelines. Conduct thorough site inspections and rigorous testing to verify proper installation and optimal functionality of instrumentation systems. Collaborate closely with multidisciplinary project teams to seamlessly integrate instrumentation systems into overall plant operations. Develop, implement, and oversee maintenance schedules for instrumentation and control systems, ensuring long-term reliability and performance. Diagnose, troubleshoot, and resolve complex issues with instrumentation and control systems, providing expert guidance and support. Lead and actively contribute to HAZOP (Hazard and Operability Study) and LOPA (Layer of Protection Analysis) meetings, ensuring safety and compliance. Maintain meticulous documentation and records in strict accordance with COMAH regulations, ensuring regulatory compliance. Ensure all instrumentation and control systems comply with ATEX directives, providing expert oversight and guidance. Select, install, and validate ATEX-certified equipment in hazardous areas, ensuring safety and compliance. Identify, evaluate, and implement opportunities for process improvements, driving innovation and efficiency within the instrumentation domain. Oversee functional safety activities, including the development of Safety Requirements Specifications (SRS), arranging Functional Safety Assessments (FSA), and performing verification calculations to ensure compliance with safety standards. SHEQ: Ensure that all Health, Safety and Environmental requirements are met including (but not limited to) workplace organization, work instructions, risk assessments, COSHH assessments, housekeeping standards in accordance with GLP and GMP Demonstrable evidence of understanding the importance of creating a safe environment Working in a safe manner Follow appropriate and relevant practices and procedures Team Building & Incentive: Assist in the generation, data collection and monitoring of key performance indicators (KPIs). Organize and deliver SHE related training modules for staff. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Communication: Verbal and written communication within Engineering Team. Participate in interdepartmental communications. Confidentiality: Follow company policies and procedures to keep confidentiality on sensitive information. Skills & Qualifications: Bachelor's degree in Electrical, Instrumentation & Control Systems Engineering, or a related field. Functional safety qualifications (desirable) CompEx Ex12 (Desirable) Strong knowledge of COMAH and ATEX regulations and safety standards. Proficiency in instrumentation and control system design, installation, and maintenance. Excellent problem-solving and analytical skills. Strong communication and teamwork abilities. Proficiency in AutoCAD for designing and drafting instrumentation and control systems. Experience with batch processing systems (Desirable) Familiarity with PLC, DCS, and SCADA systems particularly Siemens PCS7 (Desirable) You have been sent this vacancy list by EC&I Partners. By clicking "accept", we will call you to discuss your current circumstancesand process your application. If you choose to"reject", please add a comment to help us understand why the role isn't for you. If you would like to talk to one of our consultants before making a decision, our phone number is (phone number removed). Please note our office hours are 9am-4pm Monday-Friday.
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working click apply for full job details
Oct 01, 2025
Full time
Our Reliability Maintenance Engineering (RME) team is central to Amazon's commitment to innovation. As Amazon evolves and adapts, this team makes sure that the tools and technologies we use do as well. As a Senior RME Technician, you'll help us stay one step ahead, adopting the latest technologies and identifying new and efficient ways of working click apply for full job details
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent To be considered, candidates must be eligible to work in the UK and able to attend work on site at our facility in Peterlee, UK. Applicants must have proven experience with LabVIEW, as this is integral to the role. Unfortunately, candidates without this experience cannot be considered. Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
Oct 01, 2025
Full time
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent To be considered, candidates must be eligible to work in the UK and able to attend work on site at our facility in Peterlee, UK. Applicants must have proven experience with LabVIEW, as this is integral to the role. Unfortunately, candidates without this experience cannot be considered. Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
Sep 22, 2025
Full time
Job Title: Electronics Test Engineer Location: Peterlee Salary: Up to £45k per annum doe Job Type: Full-time, Permanent Founded on decades of expertise, ABT has evolved into a leader in battery technology. Our journey began with a mission to provide OEMs with superior battery solutions, and we have consistently achieved this through continuous innovation and dedication to quality. Our extensive experience allows us to understand and anticipate the unique challenges faced by our clients, ensuring that we provide tailored solutions that drive success. Our headquarters and state-of-the-art battery pack manufacturing facility are located in the UK, strategically positioned to serve our clients effectively across the globe, including the United States of America. We also have a team based in Germany, enhancing our ability to fully support European OEMs with their custom battery pack needs. Our strategic locations allow us to seamlessly serve all geographical markets, ensuring efficient and reliable operations. Our commitment to excellence and customer-centric approach ensures that your product's power needs are met with the highest standards of quality and performance. Scope of the Role Working within the Engineering team and supporting the Senior Electronics Test Engineer with new product testing development for rechargeable battery solutions. We're looking for a candidate with a creative and innovate mindset, to design and develop new custom automated test equipment, assist with the maintenance of existing equipment, to work with test technicians and collaborate with other departments in NPI and PFMEA processes for new products. We are looking for a proactive and detail-oriented Electronics Test Engineer with a strong background in electrical and electronic engineering, ideally supported by hands-on experience in a manufacturing or test environment. The successful candidate will combine excellent technical skills, particularly in LabVIEW programming, troubleshooting, and test equipment development, with strong problem-solving ability and a structured approach to work. They will be an organised and motivated individual who communicates clearly, adapts well to change, and enjoys collaborating across engineering, NPI production, and quality teams to deliver reliable solutions and continuous improvements. Main Duties and Responsibilities Test Design & Execution Design and execute test plans for new battery products under development. Develop test specifications in line with customer requirements and SPQP standards. Conduct failure mode analysis and support prevention activities to improve product reliability. Equipment Development & Maintenance Design, develop, and validate new test equipment and fixtures to support battery pack manufacture. Maintain and improve existing test equipment and fixtures to ensure accuracy, reliability, and efficiency. Manage version control of compiled firmware (hex files) and provide support for programming fixtures. Production & Technical Support Provide technical expertise and troubleshooting support to production teams. Deliver ongoing training, mentoring, and guidance to Electronics Technicians. Actively contribute to PFMEA activities and provide testing input into the New Product Introduction (NPI) process. Quality, Validation & Reporting Verify and validate test equipment and fixtures in accordance with company and industry standards. Maintain accurate records and documentation in line with quality management systems and company procedures. Prepare clear, detailed test reports and communicate results effectively to both internal teams and external customers. Qualifications and Experience Degree in Electrical and Electronic Engineering (BEng) or equivalent relevant qualification/experience. Previous experience in a similar test engineering role within electronics or manufacturing. Strong programming skills, particularly in LabVIEW (primary tool, with established VI library), with additional experience in C# and Arduino platforms. Experience using SQL databases for test data acquisition and analysis. Excellent IT skills across a range of applications. Strong fault-finding and troubleshooting ability, both on test equipment and on electronic products. Clear and effective written and verbal communication skills. Highly organised, self-motivated and enthusiastic, with the ability to prioritise effectively and work flexibly in response to changing circumstances and demands. Additional Notes Please note that we kindly ask recruitment agencies to refrain from contacting us regarding this vacancy. Any unsolicited CVs submitted will be considered a free-of-charge submission, and no agency fees will apply. Candidates with the relevant experience or job titles of: Test Engineer, Converting Engineer, Electrical Engineer, Electrical Technician may also be considered for this role.
