A leading UK engineering and manufacturing business is seeking experienced Fabricator / Welders to join its growing production team. This is an excellent opportunity to work for a well-established manufacturer producing high-quality fabricated steel products within a modern, well-equipped facility. The successful candidate will be responsible for fabricating and welding components to engineering drawings while maintaining the highest standards of quality and safety. Key Responsibilities Read and interpret 2D and 3D engineering drawings. Measure, mark out, cut and prepare materials to specification. Fabricate and assemble metal components using engineering drawings. Carry out MIG welding and fabrication to a high standard. Ensure all required materials and components are available before assembly. Grind, finish and prepare completed fabrications. Complete quality inspections and associated documentation. Work safely and comply with all Health & Safety procedures. Maintain high standards of workmanship and housekeeping. About You To be successful in this role, you will ideally have: Previous experience as a Fabricator / Welder within a manufacturing or engineering environment. Experience fabricating and welding mild steel. Experience working with mild steel, Zintec and galvanised sheet materials ranging from approximately 0.9mm to 30mm thickness. Ability to read and interpret engineering drawings. Good understanding of fabrication processes and manufacturing techniques. Experience using a wide range of fabrication equipment and hand tools. Strong attention to detail and commitment to producing quality work. Good mathematical and measurement skills. Ability to handle and manoeuvre large fabricated components. Overhead crane experience would be advantageous. Welding qualifications or certifications are desirable but not essential. Working Hours The role is based on a 40-hour working week with the following shift options: Days Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Afternoons Monday to Thursday: 2:00pm - 12:30am Includes a 20% shift allowance . Overtime (optional): Saturday: 6 hours The business closes for all Bank Holidays and enjoys a full Christmas shutdown. Benefits The successful candidate will receive an excellent benefits package including: 20% shift allowance for afternoon shifts. 31 days annual leave (including Bank Holidays), increasing with service. Holiday buy and sell scheme. Christmas shutdown. Two paid 15-minute breaks each day plus an unpaid lunch break. Workplace health checks. Optical vouchers. 24/7 GP access for employees and immediate family members. Salary sacrifice schemes. Death-in-service cover. Free on-site parking. Comprehensive induction and ongoing training. Genuine opportunities for career progression and professional development. Supportive, collaborative working environment. Apply Now - Immediate start If you are an experienced Fabricator / Welder looking to join a successful and expanding engineering business that values quality, teamwork and career development, we would like to hear from you.
Aug 15, 2026
Full time
A leading UK engineering and manufacturing business is seeking experienced Fabricator / Welders to join its growing production team. This is an excellent opportunity to work for a well-established manufacturer producing high-quality fabricated steel products within a modern, well-equipped facility. The successful candidate will be responsible for fabricating and welding components to engineering drawings while maintaining the highest standards of quality and safety. Key Responsibilities Read and interpret 2D and 3D engineering drawings. Measure, mark out, cut and prepare materials to specification. Fabricate and assemble metal components using engineering drawings. Carry out MIG welding and fabrication to a high standard. Ensure all required materials and components are available before assembly. Grind, finish and prepare completed fabrications. Complete quality inspections and associated documentation. Work safely and comply with all Health & Safety procedures. Maintain high standards of workmanship and housekeeping. About You To be successful in this role, you will ideally have: Previous experience as a Fabricator / Welder within a manufacturing or engineering environment. Experience fabricating and welding mild steel. Experience working with mild steel, Zintec and galvanised sheet materials ranging from approximately 0.9mm to 30mm thickness. Ability to read and interpret engineering drawings. Good understanding of fabrication processes and manufacturing techniques. Experience using a wide range of fabrication equipment and hand tools. Strong attention to detail and commitment to producing quality work. Good mathematical and measurement skills. Ability to handle and manoeuvre large fabricated components. Overhead crane experience would be advantageous. Welding qualifications or certifications are desirable but not essential. Working Hours The role is based on a 40-hour working week with the following shift options: Days Monday to Thursday: 7:00am - 4:00pm Friday: 7:00am - 1:00pm Afternoons Monday to Thursday: 2:00pm - 12:30am Includes a 20% shift allowance . Overtime (optional): Saturday: 6 hours The business closes for all Bank Holidays and enjoys a full Christmas shutdown. Benefits The successful candidate will receive an excellent benefits package including: 20% shift allowance for afternoon shifts. 31 days annual leave (including Bank Holidays), increasing with service. Holiday buy and sell scheme. Christmas shutdown. Two paid 15-minute breaks each day plus an unpaid lunch break. Workplace health checks. Optical vouchers. 24/7 GP access for employees and immediate family members. Salary sacrifice schemes. Death-in-service cover. Free on-site parking. Comprehensive induction and ongoing training. Genuine opportunities for career progression and professional development. Supportive, collaborative working environment. Apply Now - Immediate start If you are an experienced Fabricator / Welder looking to join a successful and expanding engineering business that values quality, teamwork and career development, we would like to hear from you.
Job title:Fabricator WelderJob location:BurtonSalary:£18Hours per week:40Overtime AvailableDuration:PermanentStart date:ImmediateClient Summary:Our client is a well-established manufacturing business specialising in the production of large, bespoke fabricated products for a variety of industries. Due to continued growth, they are looking to recruit an experienced Fabricator Welder to join their skilled workshop team.Position Summary:The successful candidate will be responsible for the fabrication and welding of large specialist fabricated products using both mild steel and stainless steel. You will be able to interpret and work from engineering drawings with minimal supervision, producing high-quality work to specification while maintaining excellent health and safety standards.Key Duties: Fabrication and welding of large bespoke products using mild steel and stainless steel. MIG welding to a high standard, with TIG welding experience being advantageous. Read and interpret engineering drawings accurately. Measure, mark out and prepare materials for fabrication. Assemble fabricated components in line with engineering specifications. Operate workshop equipment safely and efficiently. Carry out quality checks to ensure finished products meet customer requirements. Work collaboratively with the production team to achieve production targets. Maintain a clean, organised and safe working environment. Adhere to all company health and safety procedures.Person Profile/Experience: Previous experience as a Fabricator Welder within a manufacturing environment. Strong MIG welding experience with mild steel and stainless steel. Ability to fabricate from engineering drawings without supervision. Experience working on large fabricated products or heavy engineering projects. Excellent attention to detail and commitment to producing high-quality work. Ability to work independently and as part of a team. Positive attitude with a strong work ethic and willingness to contribute to the wider team.Qualifications: Time-served apprenticeship or recognised fabrication/welding qualification (preferred but not essential). MIG welding qualification or coded welding experience is advantageous. Ability to read and interpret engineering drawings. Forklift or overhead crane experience is beneficial but not essential.Contact Information: James BellEmail:
Aug 15, 2026
Full time
Job title:Fabricator WelderJob location:BurtonSalary:£18Hours per week:40Overtime AvailableDuration:PermanentStart date:ImmediateClient Summary:Our client is a well-established manufacturing business specialising in the production of large, bespoke fabricated products for a variety of industries. Due to continued growth, they are looking to recruit an experienced Fabricator Welder to join their skilled workshop team.Position Summary:The successful candidate will be responsible for the fabrication and welding of large specialist fabricated products using both mild steel and stainless steel. You will be able to interpret and work from engineering drawings with minimal supervision, producing high-quality work to specification while maintaining excellent health and safety standards.Key Duties: Fabrication and welding of large bespoke products using mild steel and stainless steel. MIG welding to a high standard, with TIG welding experience being advantageous. Read and interpret engineering drawings accurately. Measure, mark out and prepare materials for fabrication. Assemble fabricated components in line with engineering specifications. Operate workshop equipment safely and efficiently. Carry out quality checks to ensure finished products meet customer requirements. Work collaboratively with the production team to achieve production targets. Maintain a clean, organised and safe working environment. Adhere to all company health and safety procedures.Person Profile/Experience: Previous experience as a Fabricator Welder within a manufacturing environment. Strong MIG welding experience with mild steel and stainless steel. Ability to fabricate from engineering drawings without supervision. Experience working on large fabricated products or heavy engineering projects. Excellent attention to detail and commitment to producing high-quality work. Ability to work independently and as part of a team. Positive attitude with a strong work ethic and willingness to contribute to the wider team.Qualifications: Time-served apprenticeship or recognised fabrication/welding qualification (preferred but not essential). MIG welding qualification or coded welding experience is advantageous. Ability to read and interpret engineering drawings. Forklift or overhead crane experience is beneficial but not essential.Contact Information: James BellEmail:
MIG Welder / Fabricator Monday - Friday 8AM - 5PM 18-Month Fixed-Term Contract Salary £35,000 per annum Our client, a well-established and respected engineering business, is seeking an experienced Mild Steel MIG Welder / Fabricator to join their team on an 18-month fixed-term contract. This is an excellent opportunity for a skilled professional to work on a variety of interesting projects within a supportive and fast-paced workshop environment. The successful candidate will be a hands-on fabricator with a strong eye for detail, a commitment to high-quality workmanship, and the ability to thrive as part of a close-knit team. Key Responsibilities: Carry out high-quality MIG welding and fabrication of mild steel components Read and interpret technical drawings, including CAD and Inventor designs Safely operate a range of workshop machinery and tools, including pillar drills, mag drills, bandsaws, angle grinders, ironworkers, and guillotines Accurately measure, cut, and assemble materials in line with specifications Perform quality checks to ensure all work meets required standards Maintain a clean, organised, and safe workshop environment Support general workshop upkeep and housekeeping Collaborate effectively with colleagues to meet production deadlines Assist with assembly tasks, including bolting and painting Load and unload steelwork for deliveries to and from the yard Requirements: Proven experience in MIG welding and mild steel fabrication Ability to confidently read and interpret CAD and Inventor drawings Strong competence in using workshop tools and machinery Excellent attention to detail and commitment to quality Ability to work efficiently in a fast-paced environment Strong communication skills and a team-oriented approach Desirable: NVQ Level 2 (or equivalent) in Welding, Fabrication, or a related field What's on Offer: Competitive salary, dependent on experience Opportunity to work on varied and engaging projects Supportive and collaborative team environment Stable 18-month contract with a reputable employer If you're a motivated and skilled fabricator looking for your next contract opportunity, we would be keen to hear from you, apply today to discuss with Gabriella Saunders from ACS Staffing Solutions!
Aug 15, 2026
Full time
MIG Welder / Fabricator Monday - Friday 8AM - 5PM 18-Month Fixed-Term Contract Salary £35,000 per annum Our client, a well-established and respected engineering business, is seeking an experienced Mild Steel MIG Welder / Fabricator to join their team on an 18-month fixed-term contract. This is an excellent opportunity for a skilled professional to work on a variety of interesting projects within a supportive and fast-paced workshop environment. The successful candidate will be a hands-on fabricator with a strong eye for detail, a commitment to high-quality workmanship, and the ability to thrive as part of a close-knit team. Key Responsibilities: Carry out high-quality MIG welding and fabrication of mild steel components Read and interpret technical drawings, including CAD and Inventor designs Safely operate a range of workshop machinery and tools, including pillar drills, mag drills, bandsaws, angle grinders, ironworkers, and guillotines Accurately measure, cut, and assemble materials in line with specifications Perform quality checks to ensure all work meets required standards Maintain a clean, organised, and safe workshop environment Support general workshop upkeep and housekeeping Collaborate effectively with colleagues to meet production deadlines Assist with assembly tasks, including bolting and painting Load and unload steelwork for deliveries to and from the yard Requirements: Proven experience in MIG welding and mild steel fabrication Ability to confidently read and interpret CAD and Inventor drawings Strong competence in using workshop tools and machinery Excellent attention to detail and commitment to quality Ability to work efficiently in a fast-paced environment Strong communication skills and a team-oriented approach Desirable: NVQ Level 2 (or equivalent) in Welding, Fabrication, or a related field What's on Offer: Competitive salary, dependent on experience Opportunity to work on varied and engaging projects Supportive and collaborative team environment Stable 18-month contract with a reputable employer If you're a motivated and skilled fabricator looking for your next contract opportunity, we would be keen to hear from you, apply today to discuss with Gabriella Saunders from ACS Staffing Solutions!
This job is being advertised by S&D Trade Recruitment Limited who are operating as an employment business. We are looking for a welder/ fabricator to assist our valued client. No codings required but must be competent in MIG welding and fabricating. Immediate start available. Please send your CV and call Matt
Aug 15, 2026
Full time
This job is being advertised by S&D Trade Recruitment Limited who are operating as an employment business. We are looking for a welder/ fabricator to assist our valued client. No codings required but must be competent in MIG welding and fabricating. Immediate start available. Please send your CV and call Matt
Morgan Jones Recruitment Consultants
Sevenoaks, Kent
Workshop Operative Sevenoaks Salary - £30,000 (DOE) Hours : Monday Friday 07 30 Permanent Full-Time A growing and well-established manufacturing business based in, Sevenoaks is looking to recruit a Fabricator to join their expanding team. This is an excellent opportunity to join a small, skilled workshop environment where your practical ability and attention to detail will be highly valued. The Role Working within a close-knit workshop team, you will be responsible for the fabrication and assembly of specialist components using fibreglass materials. The role is hands-on and requires precision, accuracy, and strong practical problem-solving skills. Key responsibilities include: Measuring, marking, and cutting materials accurately Assembling and bolting components (non-welding environment) Working from drawings and measurements Handling and manoeuvring heavier materials safely Maintaining high standards of workmanship and efficiency About You We re looking for someone with a solid practical background who enjoys working with their hands and takes pride in producing accurate work. Essential: 1 3 years workshop or site-based experience Strong numerical and measuring skills Practical mindset with good problem-solving ability Physically capable of manual handling Willingness to learn specialist fabrication techniques Highly Desirable: Carpentry background (particularly suited to this environment) Experience with fibreglass General fabrication or workshop experience Experience working in small teams Please note: This role is not suited to candidates seeking welding-focused metalwork positions. What s on Offer Salary circa £30,000 depending on experience 20 days holiday + bank holidays Pension scheme Bonus scheme launching later this year Stable, growing business with long-term opportunity Morgan Jones is committed to creating a diverse and inclusive environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy, which can be found on our website. Due to the high volume of applicants, we ask that if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on Facebook, Instagram, Twitter, or LinkedIn.
Aug 15, 2026
Seasonal
Workshop Operative Sevenoaks Salary - £30,000 (DOE) Hours : Monday Friday 07 30 Permanent Full-Time A growing and well-established manufacturing business based in, Sevenoaks is looking to recruit a Fabricator to join their expanding team. This is an excellent opportunity to join a small, skilled workshop environment where your practical ability and attention to detail will be highly valued. The Role Working within a close-knit workshop team, you will be responsible for the fabrication and assembly of specialist components using fibreglass materials. The role is hands-on and requires precision, accuracy, and strong practical problem-solving skills. Key responsibilities include: Measuring, marking, and cutting materials accurately Assembling and bolting components (non-welding environment) Working from drawings and measurements Handling and manoeuvring heavier materials safely Maintaining high standards of workmanship and efficiency About You We re looking for someone with a solid practical background who enjoys working with their hands and takes pride in producing accurate work. Essential: 1 3 years workshop or site-based experience Strong numerical and measuring skills Practical mindset with good problem-solving ability Physically capable of manual handling Willingness to learn specialist fabrication techniques Highly Desirable: Carpentry background (particularly suited to this environment) Experience with fibreglass General fabrication or workshop experience Experience working in small teams Please note: This role is not suited to candidates seeking welding-focused metalwork positions. What s on Offer Salary circa £30,000 depending on experience 20 days holiday + bank holidays Pension scheme Bonus scheme launching later this year Stable, growing business with long-term opportunity Morgan Jones is committed to creating a diverse and inclusive environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status About Morgan Jones: Morgan Jones Limited acts as an employment agency. By applying, you accept the Terms & Conditions as well as the Privacy, Cookie, and Data Retention Policy, which can be found on our website. Due to the high volume of applicants, we ask that if you have not heard back from us within 72 hours, please assume that you have been unsuccessful on this occasion. To view other great opportunities, visit our website or follow Morgan Jones on Facebook, Instagram, Twitter, or LinkedIn.
Monday - Thursday: 08:00hrs - 17:00hrs. Friday: 08:00hrs - 14:00hrs Opportunity for 1 x hour of overtime every morning, paid at 1.5 times the hourly rate. Own Transportation Required. We have a fantastic opportunity with one of our key clients who are looking for an experience Welder Fabricator to join their busy manufacturing team. The ideal candidate will be producing high-quality engineered products for the agricultural, construction and specialist machinery sectors. The successful candidate will work from engineering drawings and job specifications to fabricate, weld and assemble accurate, strong and reliable components. The role will involve a range of welding and fabrication duties, including MIG welding, with TIG and MMA experience being advantageous. The candidate will also be required to carry out cutting, grinding, drilling, forming, fitting and general workshop fabrication tasks. The ideal candidate will take pride in their workmanship, have a good eye for detail and be able to work safely and efficiently as part of a team. They should be confident working with mild steel and other engineering materials, able to follow procedures, maintain high quality standards and contribute to the continued production of robust equipment. Interested? Apply now to join a dynamic team where your skills and dedication will make a difference! How to Apply: if you are interested in the position and would like to apply, please email your CV to : . co . uk Alternatively call: (phone number removed). "In line with our commitment to the Responsible Recruitment Toolkit, no recruitment fees or costs will be charged for your application to this role" This position is offered by NextGen Recruits on behalf of our client.
Aug 15, 2026
Full time
Monday - Thursday: 08:00hrs - 17:00hrs. Friday: 08:00hrs - 14:00hrs Opportunity for 1 x hour of overtime every morning, paid at 1.5 times the hourly rate. Own Transportation Required. We have a fantastic opportunity with one of our key clients who are looking for an experience Welder Fabricator to join their busy manufacturing team. The ideal candidate will be producing high-quality engineered products for the agricultural, construction and specialist machinery sectors. The successful candidate will work from engineering drawings and job specifications to fabricate, weld and assemble accurate, strong and reliable components. The role will involve a range of welding and fabrication duties, including MIG welding, with TIG and MMA experience being advantageous. The candidate will also be required to carry out cutting, grinding, drilling, forming, fitting and general workshop fabrication tasks. The ideal candidate will take pride in their workmanship, have a good eye for detail and be able to work safely and efficiently as part of a team. They should be confident working with mild steel and other engineering materials, able to follow procedures, maintain high quality standards and contribute to the continued production of robust equipment. Interested? Apply now to join a dynamic team where your skills and dedication will make a difference! How to Apply: if you are interested in the position and would like to apply, please email your CV to : . co . uk Alternatively call: (phone number removed). "In line with our commitment to the Responsible Recruitment Toolkit, no recruitment fees or costs will be charged for your application to this role" This position is offered by NextGen Recruits on behalf of our client.
Trainee Fabricator and labourers - Sandy Are you looking for your next opportunity and interested in learning a skilled trade? I recruiting on behalf of our client in Sandy for a Trainee Fabricator and a Labourer to join their growing team. This is a long-term temporary position with the potential to become permanent for the right candidate. No previous fabrication experience is required - full training will be provided. If you're practical, enjoy hands-on work, and are eager to learn, this could be the perfect role for you. What you'll be doing: Learning all aspects of manufacturing windows and doors Using a variety of hand tools and equipment Working as part of a busy production team Following quality and safety procedures What we're looking for: Confidence using hand tools or a willingness to learn A positive attitude and strong work ethic Ability to work in a physically demanding environment, including some lifting Reliability and flexibility to work overtime when required Working Hours: Monday to Friday, 8:00am - 4:30pm Weekend work available during busy periods Overtime opportunities available Pay: 12.71 per hour Location: Due to the location of the role, having your own transport would be advantageous. If you're available immediately and would like to start a career in fabrication with full training provided please apply today. Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Aug 15, 2026
Full time
Trainee Fabricator and labourers - Sandy Are you looking for your next opportunity and interested in learning a skilled trade? I recruiting on behalf of our client in Sandy for a Trainee Fabricator and a Labourer to join their growing team. This is a long-term temporary position with the potential to become permanent for the right candidate. No previous fabrication experience is required - full training will be provided. If you're practical, enjoy hands-on work, and are eager to learn, this could be the perfect role for you. What you'll be doing: Learning all aspects of manufacturing windows and doors Using a variety of hand tools and equipment Working as part of a busy production team Following quality and safety procedures What we're looking for: Confidence using hand tools or a willingness to learn A positive attitude and strong work ethic Ability to work in a physically demanding environment, including some lifting Reliability and flexibility to work overtime when required Working Hours: Monday to Friday, 8:00am - 4:30pm Weekend work available during busy periods Overtime opportunities available Pay: 12.71 per hour Location: Due to the location of the role, having your own transport would be advantageous. If you're available immediately and would like to start a career in fabrication with full training provided please apply today. Brook Street NMR is acting as an Employment Business in relation to this vacancy.
Steel Profiler - Heavy Engineering Location: Atherton Salary: £31,200 + Overtime THE ROLE We are recruiting on behalf of a long-established heavy engineering business based in Atherton who are looking to strengthen their fabrication team with an experienced Plater / Fabricator click apply for full job details
Aug 15, 2026
Full time
Steel Profiler - Heavy Engineering Location: Atherton Salary: £31,200 + Overtime THE ROLE We are recruiting on behalf of a long-established heavy engineering business based in Atherton who are looking to strengthen their fabrication team with an experienced Plater / Fabricator click apply for full job details
Trainee Fabricator Wigan Full Time £26,000 - £28,000 per annum Trainee Fabricator Welder (Industrial Doors) - Two vacancies are available; applications are also welcome from experienced Fabricators and Welders. Alliance Door Engineering is an independent company specialising in the design, manufacture, installation and maintenance of industrial doors and roller shutters. The team of technically gifted, highly experienced and friendly professionals have gained an enviable reputation for excellent customer service and high-quality products. Established in 2001, the business has achieved a track record of consistent growth, now embarking on an ambitious expansion plan. The Role - Fabricator / Trainee Fabricator / Welder Reporting to the Workshop Manager, you'll be fully trained to work as part of our friendly and dedicated team fabricating all the components of a wide range of bespoke industrial doors such as roller shutters, high speed doors, folding shutters, and garage doors. Our Requirements - Trainee Fabricator / Welder vacancy: A genuine interest in developing a career as a Fabricator / Welder. Desire to learn and develop the ability to use workshop tools; Guillotine / Mig Welder / Band Saw / Pillar Drill / Brake Press. Ability to learn to read and interpret engineering drawings. Flexible attitude, with good organisation and prioritisation skills. The Package As a Trainee Fabricator / Welder you'll benefit from: A trainee starting salary in the region of 26,000 to £28,000 with the level dependent on experience and qualifications. For those already experienced as a Fabricator / Welder the salary is negotiable. Overtime is available from time to time which is paid. Contributory pension scheme. 31 days annual leave inclusive of bank holidays. Permanent contract with full-time hours, working Monday to Friday between 7:30am to 4:00pm, with flexibility required to meet business and client needs. Private health care. Free parking. All applications for these Trainee Fabricator / Welder vacancies are to be submitted online, and strictly no agency calls or agency CV submissions.
Aug 15, 2026
Full time
Trainee Fabricator Wigan Full Time £26,000 - £28,000 per annum Trainee Fabricator Welder (Industrial Doors) - Two vacancies are available; applications are also welcome from experienced Fabricators and Welders. Alliance Door Engineering is an independent company specialising in the design, manufacture, installation and maintenance of industrial doors and roller shutters. The team of technically gifted, highly experienced and friendly professionals have gained an enviable reputation for excellent customer service and high-quality products. Established in 2001, the business has achieved a track record of consistent growth, now embarking on an ambitious expansion plan. The Role - Fabricator / Trainee Fabricator / Welder Reporting to the Workshop Manager, you'll be fully trained to work as part of our friendly and dedicated team fabricating all the components of a wide range of bespoke industrial doors such as roller shutters, high speed doors, folding shutters, and garage doors. Our Requirements - Trainee Fabricator / Welder vacancy: A genuine interest in developing a career as a Fabricator / Welder. Desire to learn and develop the ability to use workshop tools; Guillotine / Mig Welder / Band Saw / Pillar Drill / Brake Press. Ability to learn to read and interpret engineering drawings. Flexible attitude, with good organisation and prioritisation skills. The Package As a Trainee Fabricator / Welder you'll benefit from: A trainee starting salary in the region of 26,000 to £28,000 with the level dependent on experience and qualifications. For those already experienced as a Fabricator / Welder the salary is negotiable. Overtime is available from time to time which is paid. Contributory pension scheme. 31 days annual leave inclusive of bank holidays. Permanent contract with full-time hours, working Monday to Friday between 7:30am to 4:00pm, with flexibility required to meet business and client needs. Private health care. Free parking. All applications for these Trainee Fabricator / Welder vacancies are to be submitted online, and strictly no agency calls or agency CV submissions.
HR GO Recruitment - Bishop's Stortford
Saxmundham, Suffolk
Fabricator / Welder Location: Saxmundham, East Suffolk (own transport required) Salary: Up to £37,570 PA (Depending on Experience) Hours: Monday to Friday, 42.5 hours per week Working hours options: 07:30-16:30 We're recruiting on behalf of a well-established, family-run engineering business specialising in high-quality fabrication, bespoke metalwork, and engineered solutions for the agricultural secto click apply for full job details
Aug 15, 2026
Full time
Fabricator / Welder Location: Saxmundham, East Suffolk (own transport required) Salary: Up to £37,570 PA (Depending on Experience) Hours: Monday to Friday, 42.5 hours per week Working hours options: 07:30-16:30 We're recruiting on behalf of a well-established, family-run engineering business specialising in high-quality fabrication, bespoke metalwork, and engineered solutions for the agricultural secto click apply for full job details
Welding Trainer Location: North Yorkshire Job Type: Permanent, Full Time (37 hours per week) Salary: £25,000 - £37,000 per annum (dependent on experience and qualifications) The Opportunity We are looking for an experienced and motivated Welding Trainer to join our growing Adult and Community Learning team. This is an excellent opportunity for an industry professional who is passionate about developing the next generation of skilled welders and fabricators. In this role, you will design, deliver and assess high-quality, industry-focused training programmes for adult learners. Working closely with employers, you will help learners develop practical welding and fabrication skills, along with the knowledge, behaviours and employability skills needed to succeed in today's engineering and manufacturing sectors. You will manage a caseload of learners, providing guidance, mentoring and ongoing assessment to support their progression into employment, further training or career advancement. Key Responsibilities Plan and deliver engaging, high-quality welding training programmes. Conduct learner inductions and initial assessments to identify individual learning needs. Develop tailored learning plans that meet both learner and employer requirements. Deliver practical and theory-based training to industry standards. Assess learner progress and provide constructive feedback to support achievement. Manage a caseload of learners, carrying out regular reviews and maintaining accurate records. Build and maintain positive relationships with employers and external partners. Monitor learner performance to ensure high levels of retention, achievement and compliance. Promote a safe learning environment, ensuring all health and safety requirements are met. About You To be successful in this role, you will have: A relevant Level 3 qualification (or above) in Welding, Fabrication or a related engineering discipline. Current and relevant industry experience within welding and fabrication. GCSE Maths and English at Grade 4/C or above (or equivalent). Excellent technical knowledge and practical welding skills. Strong communication and organisational skills. Good ICT skills and the ability to use technology to support teaching and learning. A genuine passion for developing others and supporting learner success. Teaching, training or assessing experience is desirable but not essential. If you do not already hold a teaching qualification, support will be provided to achieve one. What We Offer Competitive salary. Generous annual leave plus bank holidays. Company pension scheme. Health and wellbeing support, including an Employee Assistance Programme. Ongoing professional development and funded training opportunities. Career progression opportunities. Flexible and family-friendly working policies. Employee discount scheme offering cashback and savings with major retailers. Cycle to Work scheme. Free or discounted onsite parking. Apply Today If you're an experienced welding professional looking to move into training, or an existing trainer seeking a new challenge, we'd love to hear from you. Join a supportive team where you can make a real difference by developing the skills of the future workforce. Important Notice Dovetail and Slate is a specialist education recruitment company. If this role isn't quite right, we welcome your CV and a call to explore other opportunities. We are committed to safeguarding children and vulnerable adults. All appointments are subject to satisfactory vetting, including a right to work check and, where relevant, an enhanced DBS, PVG (Scotland), or EWC (Wales) check, in line with Keeping Children Safe in Education. Dovetail and Slate Ltd () acts as an Employment Agency and an Employment Business under the Conduct of Employment Agencies and Employment Businesses Regulations 2003. We are an equal opportunities employer. By applying, you consent to your data being processed for recruitment purposes in line with our Privacy Policy. Because education matters. Dovetail and Slate Limited. Because education matters. Dovetail and Slate Limited () acts as an Employment Agency.
Aug 15, 2026
Full time
Welding Trainer Location: North Yorkshire Job Type: Permanent, Full Time (37 hours per week) Salary: £25,000 - £37,000 per annum (dependent on experience and qualifications) The Opportunity We are looking for an experienced and motivated Welding Trainer to join our growing Adult and Community Learning team. This is an excellent opportunity for an industry professional who is passionate about developing the next generation of skilled welders and fabricators. In this role, you will design, deliver and assess high-quality, industry-focused training programmes for adult learners. Working closely with employers, you will help learners develop practical welding and fabrication skills, along with the knowledge, behaviours and employability skills needed to succeed in today's engineering and manufacturing sectors. You will manage a caseload of learners, providing guidance, mentoring and ongoing assessment to support their progression into employment, further training or career advancement. Key Responsibilities Plan and deliver engaging, high-quality welding training programmes. Conduct learner inductions and initial assessments to identify individual learning needs. Develop tailored learning plans that meet both learner and employer requirements. Deliver practical and theory-based training to industry standards. Assess learner progress and provide constructive feedback to support achievement. Manage a caseload of learners, carrying out regular reviews and maintaining accurate records. Build and maintain positive relationships with employers and external partners. Monitor learner performance to ensure high levels of retention, achievement and compliance. Promote a safe learning environment, ensuring all health and safety requirements are met. About You To be successful in this role, you will have: A relevant Level 3 qualification (or above) in Welding, Fabrication or a related engineering discipline. Current and relevant industry experience within welding and fabrication. GCSE Maths and English at Grade 4/C or above (or equivalent). Excellent technical knowledge and practical welding skills. Strong communication and organisational skills. Good ICT skills and the ability to use technology to support teaching and learning. A genuine passion for developing others and supporting learner success. Teaching, training or assessing experience is desirable but not essential. If you do not already hold a teaching qualification, support will be provided to achieve one. What We Offer Competitive salary. Generous annual leave plus bank holidays. Company pension scheme. Health and wellbeing support, including an Employee Assistance Programme. Ongoing professional development and funded training opportunities. Career progression opportunities. Flexible and family-friendly working policies. Employee discount scheme offering cashback and savings with major retailers. Cycle to Work scheme. Free or discounted onsite parking. Apply Today If you're an experienced welding professional looking to move into training, or an existing trainer seeking a new challenge, we'd love to hear from you. Join a supportive team where you can make a real difference by developing the skills of the future workforce. Important Notice Dovetail and Slate is a specialist education recruitment company. If this role isn't quite right, we welcome your CV and a call to explore other opportunities. We are committed to safeguarding children and vulnerable adults. All appointments are subject to satisfactory vetting, including a right to work check and, where relevant, an enhanced DBS, PVG (Scotland), or EWC (Wales) check, in line with Keeping Children Safe in Education. Dovetail and Slate Ltd () acts as an Employment Agency and an Employment Business under the Conduct of Employment Agencies and Employment Businesses Regulations 2003. We are an equal opportunities employer. By applying, you consent to your data being processed for recruitment purposes in line with our Privacy Policy. Because education matters. Dovetail and Slate Limited. Because education matters. Dovetail and Slate Limited () acts as an Employment Agency.
Plater/Fabricator £150 trade test payment if you pass and start on assignment with us! We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Shift rates: Day Shift: £18.98 per hour Afternoon Shift: £22.78 per hour Night Shift: £24.10 per hour Overtime 1.5 (Mon-Sat): £28.47 per hour Overtime 2 (Sundays): £37.96 per hour Shift patterns: Days: Monday - Thursday, 06:45 - 15:00. Friday, 06:45 - 12:45 Back shift: Monday - Thursday, 14:45 - 11:00. Friday, 10:45 - 16:45 Night shift: Monday - Thursday, 22:45 - 07:00. Friday, 16:30 - 22:30 Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of Fabrication Time Served Welder Relevant NVQ Level 3 Your Benefits Package Overtime available On site occupational health Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app Dedicated On site Randstad team to help with any queries Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader!
Aug 15, 2026
Contractor
Plater/Fabricator £150 trade test payment if you pass and start on assignment with us! We are seeking skilled and flexible Platers to join our team on assignment at Caterpillar in Stockton-on-Tees. This is a chance to work for a global industry leader, develop your skills, and potentially earn a permanent contract. Job title: Plater/Fabricator Job type: 24 months Fixed term assignment Location: Stockton (TS18 3SD) Pay Rate and Working Hours: Shift rates: Day Shift: £18.98 per hour Afternoon Shift: £22.78 per hour Night Shift: £24.10 per hour Overtime 1.5 (Mon-Sat): £28.47 per hour Overtime 2 (Sundays): £37.96 per hour Shift patterns: Days: Monday - Thursday, 06:45 - 15:00. Friday, 06:45 - 12:45 Back shift: Monday - Thursday, 14:45 - 11:00. Friday, 10:45 - 16:45 Night shift: Monday - Thursday, 22:45 - 07:00. Friday, 16:30 - 22:30 Responsibilities: Work on build/weld fixtures to tight tolerances Work under own initiative as well as part of a team Follow a standard work procedure/housekeeping Carry out some manual lifting Use overhead cranes Jig work Adhering to PPE requirements and standards in place. Requirements: Previous experience of Fabrication Time Served Welder Relevant NVQ Level 3 Your Benefits Package Overtime available On site occupational health Additional holidays per year added to allowance depending on service Worker recognition schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Development opportunities and ability to apply for internal CAT roles Auto enrolment pension scheme Access to Randstad Benefits app Dedicated On site Randstad team to help with any queries Agile working pattern - This model allows for as much flexibility for the business without putting workers at a disadvantage with pay/hours. Free on site parking/ bike sheds Apply today to gain a foot in the door and further your career within an industry world leader!
An excellent opportunity for an experienced Metal Fabricator to join a well-established company! Job Type: Full-Time, Permanent. Salary: £27,295 - £30,127 Per Annum, Depending on Experience. Location: Nottingham NG7. Schedule: 38 hours per week (Mon-Thu 8am-4:45pm, Fri 8am-1pm), with occasional paid overtime where required. Would you like to help in the creation of high-quality scenic metalwork for some of the biggest productions in theatre? About The Company: The company are one of the UK's leading set construction companies, bringing spectacular productions to life to the West End, Broadway, across the UK, and internationally. Working with some of the best designers in the business, they combine artistry, craftsmanship, and technical expertise to deliver exceptional scenic builds. We are seeking a skilled metalworker, who enjoys being part of a creative team, for the role of Metal Fabricator. About The Role: Purpose of the Role To work as part of the scenic fabrication team, producing metal scenery in steel and aluminium. The role involves hands on fabrication work on both new builds and existing sets at Rocket Scenery's Nottingham workshop. This position suits a skilled metalworker who enjoys a varied workload, precision craftsmanship, and working collaboratively within a friendly and creative environment. Key Responsibilities Fabricate bespoke, large scale scenery using steel and aluminium to a high standard of finish and accuracy. Accurately read and work from technical and construction drawings. Use a range of metalworking techniques including cutting, rolling, welding, and assembly. Work with bespoke laser cut parts from our in-house laser cutter. Meet production deadlines while maintaining Rocket Scenery's high-quality standards. Work collaboratively within the Metalshop team and with other departments, liaising on materials, schedules, and construction techniques. Share skills, knowledge, and experience with colleagues, contributing to a positive and Supportive working environment. Handle materials, tools, and equipment safely and responsibly, adhering to Health & Safety and COSHH regulations. Maintain good housekeeping standards in the workshop and storage areas at all times. Carry out basic machine care and report maintenance issues promptly. Person Specification Essential Minimum 2 years' experience working in a metal fabrication or similar workshop environment. Strong practical skills in steel and aluminium fabrication. Ability to read and interpret technical drawings accurately. Excellent attention to detail and quality control. Good understanding of workshop Health & Safety requirements. Ability to work independently and as part of a team. Reliable, organised, and able to work to deadlines. Comfortable with manual handling and working at height. Desirable Experience in large-scale or scenic fabrication. Accredited welding certifications (MIG/TIG; coded welding an advantage). Understanding of the demands of theatre or live production environments. Computer literacy. Forklift and/or MEWP certification. Clean driving licence. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Aug 15, 2026
Full time
An excellent opportunity for an experienced Metal Fabricator to join a well-established company! Job Type: Full-Time, Permanent. Salary: £27,295 - £30,127 Per Annum, Depending on Experience. Location: Nottingham NG7. Schedule: 38 hours per week (Mon-Thu 8am-4:45pm, Fri 8am-1pm), with occasional paid overtime where required. Would you like to help in the creation of high-quality scenic metalwork for some of the biggest productions in theatre? About The Company: The company are one of the UK's leading set construction companies, bringing spectacular productions to life to the West End, Broadway, across the UK, and internationally. Working with some of the best designers in the business, they combine artistry, craftsmanship, and technical expertise to deliver exceptional scenic builds. We are seeking a skilled metalworker, who enjoys being part of a creative team, for the role of Metal Fabricator. About The Role: Purpose of the Role To work as part of the scenic fabrication team, producing metal scenery in steel and aluminium. The role involves hands on fabrication work on both new builds and existing sets at Rocket Scenery's Nottingham workshop. This position suits a skilled metalworker who enjoys a varied workload, precision craftsmanship, and working collaboratively within a friendly and creative environment. Key Responsibilities Fabricate bespoke, large scale scenery using steel and aluminium to a high standard of finish and accuracy. Accurately read and work from technical and construction drawings. Use a range of metalworking techniques including cutting, rolling, welding, and assembly. Work with bespoke laser cut parts from our in-house laser cutter. Meet production deadlines while maintaining Rocket Scenery's high-quality standards. Work collaboratively within the Metalshop team and with other departments, liaising on materials, schedules, and construction techniques. Share skills, knowledge, and experience with colleagues, contributing to a positive and Supportive working environment. Handle materials, tools, and equipment safely and responsibly, adhering to Health & Safety and COSHH regulations. Maintain good housekeeping standards in the workshop and storage areas at all times. Carry out basic machine care and report maintenance issues promptly. Person Specification Essential Minimum 2 years' experience working in a metal fabrication or similar workshop environment. Strong practical skills in steel and aluminium fabrication. Ability to read and interpret technical drawings accurately. Excellent attention to detail and quality control. Good understanding of workshop Health & Safety requirements. Ability to work independently and as part of a team. Reliable, organised, and able to work to deadlines. Comfortable with manual handling and working at height. Desirable Experience in large-scale or scenic fabrication. Accredited welding certifications (MIG/TIG; coded welding an advantage). Understanding of the demands of theatre or live production environments. Computer literacy. Forklift and/or MEWP certification. Clean driving licence. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Area Sales Manager - Window and Door Multi-Point Locking Systems Job Title: Project Sales Manager Architectural - Window and Door Multi-Point Locking Systems Job reference Number: Industry Sector: Locking Systems, Lever Systems, Tilt and Turn products, Window and Door Fabricators, Aluminium Door Fabricators, Composite Fire Door Fabricators, Timber Door Fabricators, Composite and Timber Door Manufacturers, Door Hardware, GAI, FDIS, Fire door Inspection, Window Hardware, Mechanical Locks, Multipoint Door Locks, Profile Cylinders, Door Fabricators, Door and Window Manufacturers and the Fenestration Industry Area to be covered: South East Remuneration: £45,000-£50,000 + £5,000-£10,000 Bonus Benefits: Fully expensed car and benefits package The role of the Area Sales Manager - Window and Door Multi-Point Locking Systems will involve: Field sales position selling high end manufactured range of multi-point locking systems for windows and door Focus of the role to sell into and manage relationships with window and door aluminium fabricators, but also; composite, PVC, composite fire doors and timber fire doors Inheriting a customer base in need of development, you will be responsible for £1.5m-£2m revenue and expected to manage the distribution network efficiently New business development role Three/ Four days on the road, remainder of time home based/ admin Targeted sectors include; composite and timber fire doors, the retail and trade sectors, new build and aluminium fabricators This area has been created through growth The ideal applicant will be an Area Sales Manager - Window and Door Multi-Point Locking Systems with: Window and door hardware field sales experience from within the construction industry Must have sold to window and door fabricators, ideally aluminium but also open to; composite, PVC, composite fire doors or timber fire doors Ability to hit the ground running New business hunter Doors/ doorsets or door hardware field sales experience GAI or FRID (fire door inspector qualification) may be advantageous Must be comfortable with technical regulations/ legislation around internal timber fire door locking systems Consultative in approach Network of contacts within composite or timber door fabrications is not essential Must be a solution sales person, not someone that sells on price Autonomous in nature Comfortable with monthly reporting and diary planning Self motivated, communicative, relationship builder with strong negotiation skills Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Composite and Timber Door Manufacturers, Commercial PVCu Tilt and Turn Manufacturers, Door Hardware, GAI, FDIS, Mechanical Locks, Multipoint Door Locks, Profile Cylinders, Door Fabricators, Door Manufacturers and the Fenestration Industry
Aug 15, 2026
Full time
Area Sales Manager - Window and Door Multi-Point Locking Systems Job Title: Project Sales Manager Architectural - Window and Door Multi-Point Locking Systems Job reference Number: Industry Sector: Locking Systems, Lever Systems, Tilt and Turn products, Window and Door Fabricators, Aluminium Door Fabricators, Composite Fire Door Fabricators, Timber Door Fabricators, Composite and Timber Door Manufacturers, Door Hardware, GAI, FDIS, Fire door Inspection, Window Hardware, Mechanical Locks, Multipoint Door Locks, Profile Cylinders, Door Fabricators, Door and Window Manufacturers and the Fenestration Industry Area to be covered: South East Remuneration: £45,000-£50,000 + £5,000-£10,000 Bonus Benefits: Fully expensed car and benefits package The role of the Area Sales Manager - Window and Door Multi-Point Locking Systems will involve: Field sales position selling high end manufactured range of multi-point locking systems for windows and door Focus of the role to sell into and manage relationships with window and door aluminium fabricators, but also; composite, PVC, composite fire doors and timber fire doors Inheriting a customer base in need of development, you will be responsible for £1.5m-£2m revenue and expected to manage the distribution network efficiently New business development role Three/ Four days on the road, remainder of time home based/ admin Targeted sectors include; composite and timber fire doors, the retail and trade sectors, new build and aluminium fabricators This area has been created through growth The ideal applicant will be an Area Sales Manager - Window and Door Multi-Point Locking Systems with: Window and door hardware field sales experience from within the construction industry Must have sold to window and door fabricators, ideally aluminium but also open to; composite, PVC, composite fire doors or timber fire doors Ability to hit the ground running New business hunter Doors/ doorsets or door hardware field sales experience GAI or FRID (fire door inspector qualification) may be advantageous Must be comfortable with technical regulations/ legislation around internal timber fire door locking systems Consultative in approach Network of contacts within composite or timber door fabrications is not essential Must be a solution sales person, not someone that sells on price Autonomous in nature Comfortable with monthly reporting and diary planning Self motivated, communicative, relationship builder with strong negotiation skills Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Composite and Timber Door Manufacturers, Commercial PVCu Tilt and Turn Manufacturers, Door Hardware, GAI, FDIS, Mechanical Locks, Multipoint Door Locks, Profile Cylinders, Door Fabricators, Door Manufacturers and the Fenestration Industry
Welder Fabricator Location: Full-Time, Permanent Salary: 34,000 per annum We are seeking an experienced and motivated Welder Fabricator to join our growing manufacturing team. This is an excellent opportunity to work within a modern production environment where quality, safety and teamwork are highly valued. The successful candidate will be responsible for operating manual and semi-automatic welding equipment to fuse metal segments using a variety of welding processes, including gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding. You will carry out positional welding on structural steel, undertake tacking, marking out, jigging and fabrication activities, and ensure all work is completed to the required quality standards. The role involves monitoring fitting, burning and welding processes to prevent overheating, distortion, shrinking, warping or expansion of materials. You will examine completed work for defects and use measuring equipment, straightedges and templates to ensure compliance with engineering specifications. Following technical drawings, standard operating procedures and bills of materials is a key part of the position. You will be required to prepare and fabricate metal components ready for welding and operate workshop equipment including chop saws, iron workers, pillar drills and linishers. Working safely in an extracted environment using Powered Air Purifying Respirator (PAPR) systems and appropriate PPE is essential. Daily responsibilities will also include carrying out pre-use machinery inspections to minimise equipment failures and maintaining a clean, tidy and safe working environment. Skills and Experience Applicants should hold a Level 3 Welding Qualification or possess equivalent industry experience. Previous experience within a fabrication and welding environment is essential, along with the ability to read and interpret engineering drawings and technical documentation. You should be IT literate and comfortable using ERP systems, Microsoft Excel and email. Experience using handheld barcode or QR code scanners would be advantageous. A strong attention to detail, excellent communication skills and the ability to manage workloads effectively in a fast-paced environment are all key requirements for this role. We are looking for someone who is physically fit, proactive, dependable and capable of working both independently and as part of a team. Strong problem-solving abilities, a positive attitude and personal integrity are essential. Working Hours 39 hours per week. Monday to Thursday: 6:00am to 2:30pm Friday: 6:00am to 1:00pm The working day includes a 30-minute unpaid lunch break and a 20-minute paid break. Benefits Our benefits package includes an Auto-Enrolment Pension Scheme, Profit Related Pay Scheme, Life Insurance, Holiday Purchase Scheme, Car Purchase Scheme, 23 days annual leave plus statutory holidays, and access to an Employee Assistance Programme. Apply Today If you are a skilled Welder Fabricator looking to join a successful business that invests in its people and offers excellent working hours and benefits, we would love to hear from you. Submit your CV today to be considered for this exciting opportunity. IPSLCOM
Aug 15, 2026
Full time
Welder Fabricator Location: Full-Time, Permanent Salary: 34,000 per annum We are seeking an experienced and motivated Welder Fabricator to join our growing manufacturing team. This is an excellent opportunity to work within a modern production environment where quality, safety and teamwork are highly valued. The successful candidate will be responsible for operating manual and semi-automatic welding equipment to fuse metal segments using a variety of welding processes, including gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding. You will carry out positional welding on structural steel, undertake tacking, marking out, jigging and fabrication activities, and ensure all work is completed to the required quality standards. The role involves monitoring fitting, burning and welding processes to prevent overheating, distortion, shrinking, warping or expansion of materials. You will examine completed work for defects and use measuring equipment, straightedges and templates to ensure compliance with engineering specifications. Following technical drawings, standard operating procedures and bills of materials is a key part of the position. You will be required to prepare and fabricate metal components ready for welding and operate workshop equipment including chop saws, iron workers, pillar drills and linishers. Working safely in an extracted environment using Powered Air Purifying Respirator (PAPR) systems and appropriate PPE is essential. Daily responsibilities will also include carrying out pre-use machinery inspections to minimise equipment failures and maintaining a clean, tidy and safe working environment. Skills and Experience Applicants should hold a Level 3 Welding Qualification or possess equivalent industry experience. Previous experience within a fabrication and welding environment is essential, along with the ability to read and interpret engineering drawings and technical documentation. You should be IT literate and comfortable using ERP systems, Microsoft Excel and email. Experience using handheld barcode or QR code scanners would be advantageous. A strong attention to detail, excellent communication skills and the ability to manage workloads effectively in a fast-paced environment are all key requirements for this role. We are looking for someone who is physically fit, proactive, dependable and capable of working both independently and as part of a team. Strong problem-solving abilities, a positive attitude and personal integrity are essential. Working Hours 39 hours per week. Monday to Thursday: 6:00am to 2:30pm Friday: 6:00am to 1:00pm The working day includes a 30-minute unpaid lunch break and a 20-minute paid break. Benefits Our benefits package includes an Auto-Enrolment Pension Scheme, Profit Related Pay Scheme, Life Insurance, Holiday Purchase Scheme, Car Purchase Scheme, 23 days annual leave plus statutory holidays, and access to an Employee Assistance Programme. Apply Today If you are a skilled Welder Fabricator looking to join a successful business that invests in its people and offers excellent working hours and benefits, we would love to hear from you. Submit your CV today to be considered for this exciting opportunity. IPSLCOM
Technical Estimator / Fabrication Administrator Bodmin, Cornwall £26,000 - £38,000 DOE Permanent Contek Recruitment Solutions are representing their client, a growing engineering and fabrication business, seeking an experienced Welder/Fabricator or technical professional looking to develop their career away from the tools click apply for full job details
Aug 14, 2026
Full time
Technical Estimator / Fabrication Administrator Bodmin, Cornwall £26,000 - £38,000 DOE Permanent Contek Recruitment Solutions are representing their client, a growing engineering and fabrication business, seeking an experienced Welder/Fabricator or technical professional looking to develop their career away from the tools click apply for full job details
The Fabrication Joiner will work within a clean room environment , specialising in the cutting, shaping, and assembly of metal components . This role focuses on the fabrication of pipe sections, metal frameworks, wall panels, and structural assemblies . No woodwork is involved. Precision, contamination control, and adherence to strict safety and quality standards are essential. Key Responsibilities Cut, shape, and prepare metal pipes, panels, and framework components using appropriate tools and machinery Fabricate and assemble metal wall panels, frames, brackets, and structural sections to specification Work within a clean room environment , following all gowning, contamination-control, and housekeeping procedures Read and interpret technical drawings, fabrication diagrams, and engineering specifications Carry out accurate measuring, marking, drilling, and finishing of metal components Operate fabrication equipment such as saws, grinders, drills, shears, and bending tools Perform quality checks to ensure all fabricated components meet dimensional and cleanliness standards Collaborate with engineering, production, and clean room teams to ensure smooth workflow Maintain accurate records of work completed, materials used, and any deviations from specification Follow all H&S procedures , including safe handling of metal materials, tools, and equipment Skills & Experience Required Proven experience as a Fabrication Joiner , Metal Joiner, Fabricator, or similar metalworking role Strong background in metal-only fabrication (no woodwork) Experience working in clean rooms, controlled environments, or precision manufacturing Confident using metal fabrication tools and machinery Ability to read and interpret technical drawings High attention to detail and commitment to quality Strong understanding of H&S , including PPE, tool safety, and contamination control Ability to work independently and as part of a team Desirable Experience in semiconductor, pharmaceutical, aerospace, or other clean manufacturing environments Knowledge of stainless steel fabrication or light-gauge metalwork Experience with modular wall systems or metal panel installation Relevant fabrication or engineering qualifications Personal Attributes Methodical and precise Safety-focused Reliable and consistent Strong problem-solving approach Able to work to tight tolerances and high standards
Aug 14, 2026
Contractor
The Fabrication Joiner will work within a clean room environment , specialising in the cutting, shaping, and assembly of metal components . This role focuses on the fabrication of pipe sections, metal frameworks, wall panels, and structural assemblies . No woodwork is involved. Precision, contamination control, and adherence to strict safety and quality standards are essential. Key Responsibilities Cut, shape, and prepare metal pipes, panels, and framework components using appropriate tools and machinery Fabricate and assemble metal wall panels, frames, brackets, and structural sections to specification Work within a clean room environment , following all gowning, contamination-control, and housekeeping procedures Read and interpret technical drawings, fabrication diagrams, and engineering specifications Carry out accurate measuring, marking, drilling, and finishing of metal components Operate fabrication equipment such as saws, grinders, drills, shears, and bending tools Perform quality checks to ensure all fabricated components meet dimensional and cleanliness standards Collaborate with engineering, production, and clean room teams to ensure smooth workflow Maintain accurate records of work completed, materials used, and any deviations from specification Follow all H&S procedures , including safe handling of metal materials, tools, and equipment Skills & Experience Required Proven experience as a Fabrication Joiner , Metal Joiner, Fabricator, or similar metalworking role Strong background in metal-only fabrication (no woodwork) Experience working in clean rooms, controlled environments, or precision manufacturing Confident using metal fabrication tools and machinery Ability to read and interpret technical drawings High attention to detail and commitment to quality Strong understanding of H&S , including PPE, tool safety, and contamination control Ability to work independently and as part of a team Desirable Experience in semiconductor, pharmaceutical, aerospace, or other clean manufacturing environments Knowledge of stainless steel fabrication or light-gauge metalwork Experience with modular wall systems or metal panel installation Relevant fabrication or engineering qualifications Personal Attributes Methodical and precise Safety-focused Reliable and consistent Strong problem-solving approach Able to work to tight tolerances and high standards
Adecco are currently recruiting for a Fabricator Welder to join our local client in Ayrshire on a permanent basis. In the role you will be working from drawings. So you should possess the knowledge and ability to cut, shape, weld (MIG, TIG, MMA), dress and finish stainless steel, carbon steel and aluminium using various powered tools to a high quality standard. Turning and pipe fitting skills are also beneficial. To be considered for this role you must have: heavy engineering/manufacturing environment Experienced in stainless steel fabrication work TIG Previous experience required Knowledge of ISO 9001 and CE marking for structural steel To discuss further please send your CV in today. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Aug 14, 2026
Full time
Adecco are currently recruiting for a Fabricator Welder to join our local client in Ayrshire on a permanent basis. In the role you will be working from drawings. So you should possess the knowledge and ability to cut, shape, weld (MIG, TIG, MMA), dress and finish stainless steel, carbon steel and aluminium using various powered tools to a high quality standard. Turning and pipe fitting skills are also beneficial. To be considered for this role you must have: heavy engineering/manufacturing environment Experienced in stainless steel fabrication work TIG Previous experience required Knowledge of ISO 9001 and CE marking for structural steel To discuss further please send your CV in today. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Steelwork Draughtsman/Design Engineer Location: Barnsley Salary: 50,000- 65,000 DOE Are you a skilled Structural Draughtsman? Would you like to join a forward thinking Manufacturing company, who are frontrunners in their sector? If so, this role is for you! Lodestone Recruitment is recruiting on behalf of a well-established structural steelwork business for an experienced structural steelwork to join their growing team, producing fabrication and erection drawings, 3D models, and material schedules for a range of structural steel projects. What's on offer 50,000- 65,000 depending on experience 25 days holiday + bank holidays (increasing with service) Paid volunteer days Contributory pension & life insurance Health cash plan & employee rewards scheme Genuine career development and progression opportunities The role Produce fabrication/erection drawings and 3D models using Tekla Structures or Advance Steel Generate GA drawings, assembly drawings, bolt lists, BOMs, and cutting lists Review engineering/architectural drawings and resolve technical queries with engineers, PMs, and fabricators Ensure compliance with British Standards and Eurocodes Update drawings for design changes, client feedback, and site needs What we're looking for Proven experience as a Structural Steelwork Detailer or Structural Design Engineer/ Draughtsman Strong Tekla Structures (or equivalent) skills Confident reading structural/architectural drawings Excellent attention to detail, communication, and organisation HNC/HND or degree in a related discipline preferred (or equivalent experience) Desirable: BIM workflow knowledge, CNC data experience (DSTV/NC files), CE/UKCA familiarity, AutoCAD Would this be something that you are interested in? Apply now if so! Lodestone Recruitment are acting as an employment agency with regards to this vacancy.
Aug 14, 2026
Full time
Steelwork Draughtsman/Design Engineer Location: Barnsley Salary: 50,000- 65,000 DOE Are you a skilled Structural Draughtsman? Would you like to join a forward thinking Manufacturing company, who are frontrunners in their sector? If so, this role is for you! Lodestone Recruitment is recruiting on behalf of a well-established structural steelwork business for an experienced structural steelwork to join their growing team, producing fabrication and erection drawings, 3D models, and material schedules for a range of structural steel projects. What's on offer 50,000- 65,000 depending on experience 25 days holiday + bank holidays (increasing with service) Paid volunteer days Contributory pension & life insurance Health cash plan & employee rewards scheme Genuine career development and progression opportunities The role Produce fabrication/erection drawings and 3D models using Tekla Structures or Advance Steel Generate GA drawings, assembly drawings, bolt lists, BOMs, and cutting lists Review engineering/architectural drawings and resolve technical queries with engineers, PMs, and fabricators Ensure compliance with British Standards and Eurocodes Update drawings for design changes, client feedback, and site needs What we're looking for Proven experience as a Structural Steelwork Detailer or Structural Design Engineer/ Draughtsman Strong Tekla Structures (or equivalent) skills Confident reading structural/architectural drawings Excellent attention to detail, communication, and organisation HNC/HND or degree in a related discipline preferred (or equivalent experience) Desirable: BIM workflow knowledge, CNC data experience (DSTV/NC files), CE/UKCA familiarity, AutoCAD Would this be something that you are interested in? Apply now if so! Lodestone Recruitment are acting as an employment agency with regards to this vacancy.
Large Format Print Operator Poole Salary up to 35k DOE +Overtime package & 28 days holidays We have an exciting opportunity for a hardworking and enthusiastic Large Format All-Rounder to join a well-established company based in Poole. My client is an established Graphic Production company, based in Poole. They have a young and dynamic team, and a workplace culture to match. They work hard to make our team feel valued as an integral part of the success of our business. What you'll need: Experience in operating Large Format Printers - (Colrado, Apollo, OCE Arizona desirable) Ability to follow instructions, work in a team and as an individual Ability to read job sheets and be pro-active Competence with vinyl production, print finishing & fitting Some installation experience is highly desired but not essential Ability to work with hand tools and light machinery Have a positive attitude and take pride in their work Have a clean UK driving licence, held for over 5 years Be eligible to work in the UK If you're missing a few of the above list but you're the right person for us, don't worry, they will train you on the rest! Your duties will include: Machine operating, including maintenance and cleaning Bench production, including weeding and laminating Quality checking of finished work Maintaining a clean and safe working environment Apply via the link with a up to date CV or contact on (phone number removed)! KEY WORDS: print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset.
Aug 14, 2026
Full time
Large Format Print Operator Poole Salary up to 35k DOE +Overtime package & 28 days holidays We have an exciting opportunity for a hardworking and enthusiastic Large Format All-Rounder to join a well-established company based in Poole. My client is an established Graphic Production company, based in Poole. They have a young and dynamic team, and a workplace culture to match. They work hard to make our team feel valued as an integral part of the success of our business. What you'll need: Experience in operating Large Format Printers - (Colrado, Apollo, OCE Arizona desirable) Ability to follow instructions, work in a team and as an individual Ability to read job sheets and be pro-active Competence with vinyl production, print finishing & fitting Some installation experience is highly desired but not essential Ability to work with hand tools and light machinery Have a positive attitude and take pride in their work Have a clean UK driving licence, held for over 5 years Be eligible to work in the UK If you're missing a few of the above list but you're the right person for us, don't worry, they will train you on the rest! Your duties will include: Machine operating, including maintenance and cleaning Bench production, including weeding and laminating Quality checking of finished work Maintaining a clean and safe working environment Apply via the link with a up to date CV or contact on (phone number removed)! KEY WORDS: print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset, print operator, print operative, print all-rounder, print, large format, signage, sign maker, sign fabricator, Poole, Dorset.
