107 jobs found

Join Our Team as an Electrical Technician Location: Slough- THIS IS A FIELD BASED ROLE AND WILL REQUIRE TRAVEL AROUND UK AIRPORTS. Contract Type: Permanent Salary: Up to £45k - Dependant on experience Working hours: Predominately Monday to Friday, some night works will be required accommodate the airport operation and project schedule. (08:00-17:00) or (20:00-05:00) Candidates must: Have the RTW in the UK (no sponsorship required) Be able to obtain an airside pass Have worked in the UK/have continuous references for the past 5 years Be able to obtain a DBS & clear criminal record Have a Full UK driving licence Electrical Technician Mission and Responsibilities Carry out the assembly and wiring of all electrical elements of Passenger Boarding Bridges (PBBs), including cabinets, consoles, lighting, and auxiliary components. Perform assembly, wiring, and testing of lifting systems, cabins, and rotundas by following engineering electrical diagrams, plans, and material lists. All work must comply with established schedules, quality standards, and company safety requirements. The ultimate goal is the correct and reliable installation of all electrical elements on the PBB. Knowledge and Previous Experience Education / Qualifications Intermediate vocational training in: Electrical installations and automation Electromechanical maintenance Specific Knowledge and Skills Ability to interpret electrical diagrams Ability to interpret engineering plans and material lists Product knowledge focused on the electrical scope of the role Safe handling of tools and equipment, including: Multimeter Hammer, drill, jigsaw, angle grinder Ladder, transport cart Manual and electric pallet trucks Overhead crane Occupational Risk Prevention training in accordance with metal sector regulations Desirable Knowledge and Skills IPAF MEWP operator licence SSSTS certificate (Site Supervisor Safety Training Scheme) Valid CSCS card Ethernet cable termination (RJ45 plugs and sockets) Experience handling large-diameter low-voltage cables for cable cutting work Previous Experience Minimum of 1 to 2 years' experience installing electrical systems Main Tasks and Activities The Electrical Technician role is subdivided according to functions and responsibilities. Line Electrical Assembly Technician - Assembly and Wiring Responsible for assembling and wiring electrical components within the boarding bridge, including: Wiring tunnels and cabins Installing and connecting tunnel and cabin electrical boxes Installing and connecting tunnel and cabin peripherals Wiring central units Connecting main cabinets Connecting lower and upper consoles Pre-assembling and assembling tunnel and cabin lighting Correctly identifying electrical elements to maintain traceability Auxiliary Workshop Electrical Assembly Additional responsibilities may include: Wiring, connecting peripherals, and testing lifting systems Assembling electrical elements in translation systems Electrical installation of rotundas Ensuring correct identification and traceability of all electrical components Line Electrical Assembly Technician - Testing and Commissioning Responsible for verifying correct operation of the PBB in line with company protocols and planning: Performing final electrical connections of the PBB Loading and calibrating software Simulating machine operation according to established protocols Applying self-control protocols, including: Testing hydraulic equipment of the lifting system Testing electrical installations of rotundas Verifying traceability of electrical components Carrying out measurement and consumption regulation checks Executing operating protocols to confirm full functionality Health, Safety, and Environmental Competencies Environmental Responsibilities Awareness of environmental aspects associated with the role Understanding of significant energy usage and control measures Responsible consumption of paper, water, and energy Correct segregation of waste: Hazardous waste: toner, batteries Non-hazardous waste: paper, plastic Health and Safety Knowledge of job-related risks and preventive measures Safe use and handling of equipment such as: Overhead cranes Forklifts Lifting platforms Correct use, inspection, and maintenance of personal protective equipment (PPE) Awareness of procedures: General safety actions Accident response Emergency response Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Manufacturing Technician Location: West London (W4) Job Type: Temp Hours: Monday -Thursday 7:45am-4:15pm Friday 7:45am-1:15pm Rate: 12.82 per hour About the Role We are seeking a skilled and motivated Manufacturing Technician to join a growing product development and manufacturing team specialising in innovative electronic and electro-mechanical products used within the entertainment and technology sectors worldwide. This is an exciting opportunity for someone with experience in electronics assembly, manufacturing, production, or testing who enjoys hands-on work and takes pride in producing high-quality products. Full product-specific training will be provided. The successful candidate will be responsible for assembling, testing, inspecting, and preparing products for dispatch while maintaining exceptional quality standards throughout the manufacturing process. You will be joining a close-knit, collaborative team that values attention to detail, accountability, and continuous improvement. Key Responsibilities Assemble and test electronic and electro-mechanical products to a high standard Carry out sub-assembly preparation tasks, including preparing and testing circuit boards and mechanical assemblies Conduct functional and integration testing of products Prepare products for extended soak testing where required Complete final inspection, finishing, packaging, and preparation of finished goods Maintain excellent quality standards and attention to detail throughout the manufacturing process Work closely with colleagues to ensure products are delivered on time and to specification Help maintain a safe, organised, and efficient working environment Take ownership of products from assembly through to dispatch Essential Requirements Previous experience in an electronics assembly, manufacturing technician, production, or similar hands-on engineering environment Relevant Mechanical, Electro-Mechanical, Electronic, or Engineering qualifications Ability to work independently and manage workload effectively Strong organisational skills with the ability to prioritise competing tasks Confidence in assembling, manufacturing, and testing products to a high standard Excellent manual dexterity and experience using a range of hand tools Methodical and detail-oriented approach to work Ability to accurately follow technical instructions, drawings, and design guidelines Strong commitment to product quality and continuous improvement Understanding of manufacturing test processes and production workflows Desirable Skills and Experience Experience supporting or mentoring colleagues within a manufacturing environment Good written and verbal communication skills Through-hole soldering experience and practical electronics knowledge Experience repairing or fault-finding electro-mechanical products Strong record-keeping and documentation skills Experience providing customer updates or technical feedback Interest in lighting, video technology, or live entertainment systems Ability to manage multiple priorities while maintaining quality standards Experience contributing to process improvements and manufacturing best practice Ability to remain calm and focused when working to deadlines Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Mechanical Assembly Fitter Gloucestershire 37.5 Hours per Week Permanent Position Competitive Salary + Benefits About the Role Adecco are recruiting for a Mechanical Assembly Fitter to join a leading engineering and manufacturing organisation in Gloucestershire. This is an excellent opportunity for an experienced mechanical fitter to become part of a skilled production team responsible for assembling complex mechanical equipment from engineering drawings and technical specifications. Working within a modern manufacturing environment, you will play a key role in the build, assembly and preparation of bespoke engineered products, ensuring they meet the highest quality and performance standards. This role offers long-term career stability, ongoing training and the opportunity to work on varied and technically interesting projects. Key Responsibilities Assemble complex mechanical equipment in accordance with engineering drawings and technical documentation. Interpret bills of materials, assembly instructions and production specifications. Carry out mechanical fitting, alignment and installation activities. Complete production documentation, check sheets and quality records accurately. Identify and report assembly, quality or engineering issues. Work closely with Production, Engineering and Quality teams to ensure products meet required standards. Support continuous improvement initiatives across the manufacturing operation. Maintain a safe, organised and efficient working environment. Adhere to all Health & Safety and company procedures at all times. What We're Looking For Essential Recognised Engineering Apprenticeship, NVQ Level 3 or equivalent qualification. Alternatively, a minimum of 5 years' hands-on mechanical fitting or assembly experience. Ability to read and interpret engineering drawings. Strong mechanical assembly and fitting skills. Experience using a variety of hand and power tools. Good problem-solving abilities and attention to detail. Ability to work effectively as part of a team. Desirable Experience assembling mechanical machinery, industrial equipment or engineered products. Manufacturing or production environment experience. Knowledge of quality documentation and inspection procedures. Experience working from bills of materials and assembly instructions. What's on Offer? Permanent role with an established engineering manufacturer. Competitive salary and benefits package. Opportunity to work on bespoke engineering projects. Ongoing training and development. Supportive and collaborative team environment. Career progression opportunities within a growing organisation. Working Environment Primarily workshop and manufacturing based. Modern engineering facility. PPE provided. Potential future shift opportunities. Occasional travel opportunities may be available. Apply Today This role would suit candidates currently working as: Mechanical Fitter Assembly Fitter Mechanical Technician Production Fitter Machine Builder Mechanical Assembler Manufacturing Technician Plant Assembler Electro-Mechanical Fitter Workshop Fitter If you're looking for a new challenge within a successful engineering and manufacturing business, we'd like to hear from you. Apply today with your CV. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Job Description About the Role As a Mechanical Technician, you will be responsible for the safe and precise assembly and testing of advanced wireline equipment, including winches and masts, supporting critical operations in the energy sector. You will play a key role in ensuring high-quality production standards, continuous improvement, and safe working practices within a collaborative workshop environment. About the Company NOV is a leading global provider of technology, equipment, and services to the energy industry. With a long-standing history of innovation, NOV supports customers in improving efficiency, safety, and environmental performance across operations worldwide. What We Offer Modern, clean, and well-organised workshop environment with high safety standards Access to high-quality tools, equipment, and newly invested machinery Structured onboarding with a hands-on buddy system to support your development from day one Stable, full-time employment in a global organization with long-term career opportunities Clear pathway for progression into more senior technician roles over time Opportunity to contribute to continuous improvement initiatives and influence how work is done Supportive, close-knit team environment where collaboration and knowledge sharing are encouraged Why Join Us? Join our Global Family: We offer an inspiring place to work with great opportunities to develop your skills and the opportunity to work with the brightest minds in the energy industry. You will become part of a professional culture where we work together in teams with other dedicated professionals to achieve common goals. NOV is a leading provider of technology, equipment, and services to the global energy industry that supports customers across drilling, completion, and production operations. NOV powers the industry that powers the world. At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing • Private Medical Insurance • Employee Assistance Programme (EAP) Finance & Protection • Pension Plan • Income Protection • Life Assurance • Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) • Dental Insurance • Healthcare Cash Plan • Partner Life Assurance • Critical Illness Cover • Retail Vouchers • Gym Membership • Cycle to Work Scheme About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team

Mechanical Test Technician Gloucestershire Double Day Shift 37.5 Hours per Week Permanent Competitive Salary + Benefits About the Role Adecco are recruiting for a Mechanical Test Technician to join a leading engineering manufacturer in Gloucestershire. This is a hands-on role within a specialist testing and production environment, where you will be responsible for the preparation, rigging, testing and inspection of complex mechanical equipment. Working as part of an experienced operations team, you will ensure products meet required performance, safety and quality standards before final release. This opportunity would suit a mechanically skilled individual with experience in manufacturing, engineering, assembly, testing or rotating equipment environments. Key Responsibilities Prepare and rig mechanical equipment for testing. Conduct performance and operational testing in line with documented procedures. Record, analyse and report test data accurately. Assess equipment against performance criteria and determine pass/fail status. Investigate and report any faults or non-conformances identified during testing. Work closely with Production, Engineering and Quality teams to resolve issues. Assist with witnessed inspections and acceptance testing when required. Ensure all work is completed in accordance with Health & Safety procedures. Maintain testing equipment and work areas to a high standard. About You To be considered, you will ideally have: A recognised Mechanical Apprenticeship, or equivalent hands-on mechanical experience. At least 2 years' experience in a manufacturing, engineering or industrial environment. Strong mechanical assembly, fitting or testing skills. Experience following engineering procedures and technical documentation. Good problem-solving abilities and attention to detail. Excellent communication skills and the ability to work effectively within a team. A positive, can-do attitude and willingness to learn. Desirable Experience Mechanical testing or inspection. Rotating equipment. Hydraulics, fluid systems or industrial machinery. Mechanical fitting or assembly. Quality inspection and test documentation. What's on Offer Permanent employment with an established engineering manufacturer. Ongoing training and development. Opportunity to work with complex mechanical equipment. Supportive team environment. Career progression opportunities. Competitive salary and benefits package. Apply Today If you're a Mechanical Fitter, Mechanical Technician, Test Technician, Assembly Technician or Manufacturing Engineer looking for your next challenge, we'd like to hear from you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

VEHICLE TECHNICIAN / VEHICLE MECHANIC Location: Yeovil Salary: Up to £36,000 Basic Salary (Depending on Experience) OTE £39,800 Job Type: Full-Time, Permanent Looking for a role where your technical skills are recognised, your career can continue to progress, and you can enjoy long-term stability? If you're an experienced Vehicle Technician or Vehicle Mechanic looking to join a busy and professional dealership workshop, this is an excellent opportunity to develop your career within a supportive team environment. Offering a competitive basic salary, achievable bonus, ongoing manufacturer training, and genuine career progression, this role is ideal for a technician looking to build a long-term future in the automotive industry. Whether you're currently working in a franchised dealership, independent garage, or fast-fit centre, you'll have the opportunity to further develop your skills while working with experienced colleagues in a modern workshop. WHAT'S IN IT FOR YOU? Up to £36,000 Basic Salary (Depending on Experience) OTE £39,800 Employee Discount Scheme Referral Programme Ongoing Training & Development Supportive Workshop Environment Genuine Career Progression Opportunities Long-Term Career Stability Full-Time, Permanent Position THE ROLE As a Vehicle Technician / Vehicle Mechanic, you'll be responsible for carrying out servicing, maintenance, diagnostics, and repairs while ensuring every vehicle is completed safely, efficiently, and to the highest manufacturer standards. Key responsibilities include: Carrying out servicing, maintenance, and repair work efficiently Diagnosing mechanical and electrical faults across a range of vehicles Completing repairs and assembly operations to manufacturer standards Carrying out vehicle health checks and identifying additional work where appropriate Ensuring all work complies with manufacturer guidelines and health & safety regulations Accurately completing workshop documentation and job cards Providing technical support and maintaining high standards of customer service Working collaboratively with the workshop team to maximise productivity and efficiency ABOUT YOU We're keen to hear from candidates who can demonstrate: NVQ Level 3 in Vehicle Maintenance and Repair (essential) At least 2 years' experience as a Vehicle Technician, Vehicle Mechanic, Automotive Technician, Car Mechanic or Motor Vehicle Technician Experience within a main dealership, independent garage or fast-fit centre Strong servicing, maintenance and diagnostic skills MOT Tester Licence desirable but not essential Ownership of your own tools and toolbox Full UK Manual Driving Licence (subject to licence checks) Right to work in the UK (sponsorship is not available) A positive attitude with excellent attention to detail and the ability to work effectively as part of a team Alternative job titles may include: Vehicle Technician, Vehicle Mechanic, Automotive Technician, Car Mechanic, Motor Vehicle Technician, Service Technician or Diagnostic Technician. APPLY TODAY This is an excellent opportunity to join a successful dealership that values its technicians, invests in their development, and offers genuine opportunities for long-term career progression within a professional workshop environment. If you're an experienced Vehicle Technician or Vehicle Mechanic looking for your next challenge in Yeovil, we'd love to hear from you. Interested in finding out more? Apply today or contact Howard at Auto Skills for a confidential discussion about this Vehicle Technician opportunity, quoting job reference 53256.

Meritus are recruiting for a Prototype Technician to join a leading technology and engineering consultancy in Romsey. PROTOTYPE TECHNICIAN - UP TO £60,000 PER ANNUM - ROMSEY, HAMPSHIRE - REQUIRED TO UNDERGO SC CLEARANCE -SECTOR: DEFENCE MERITUS are working with a leading technology and engineering consultancy to recruit a Prototype Technician to join their engineering team in Romsey . The successful candidate will support the manufacture, modification, repair and testing of prototype PCBs, cable forms and complex electro-mechanical assemblies , working closely with engineers, product managers and project teams across advanced technology programmes. The Role Working as part of the Prototype Technician Services team, you'll provide hands-on technical support across prototype manufacture, PCB assembly, cable manufacture, product modification, fault finding and repair. You'll work closely with the wider engineering community, helping to turn design concepts into functional prototypes while providing practical input around manufacturability, component selection and development. Key Responsibilities Manufacture prototype electronic assemblies in line with project requirements. Carry out PCB assembly, modification, rework and repair , including fine-pitch surface-mount components. Work under magnification and microscopes for extended periods, including soldering and reworking components down to 0201 size . Undertake BGA rework and other complex PCB assembly activities. Manufacture and modify cable forms and wiring assemblies. Carry out electro-mechanical assembly and box-build activities. Interpret and work accurately from engineering drawings, schematics and technical documentation . Provide technical support to engineers across PCB, cable and product design activities. Provide practical input into design for manufacture (DFM) and prototype development. Support component selection and advise on manufacturing approaches and emerging technologies. Fault find, diagnose and repair non-conforming or defective products. Produce and contribute to technical documentation including test reports, concessions and work instructions . Provide troubleshooting assistance to the wider engineering community. Work closely with Engineers, Product Managers and Project Managers to deliver prototype requirements to agreed timescales. Support wider manufacturing and production activities where required. Ensure all work is completed in accordance with relevant internal procedures, quality requirements and industry standards. About You We're looking for an experienced Prototype Technician, Electronics Technician or Production Technician with strong practical experience in PCB assembly and electronic prototyping. You'll ideally have: Experience working within an electronics development or prototype manufacturing environment . Strong practical PCB assembly, modification and rework experience. Extensive experience with surface-mount technology (SMT) and fine-pitch components. Experience working to IPC standards or higher . Experience working under microscopes and with magnification for extended periods. Experience with cable forming and prototyping . Experience with PCB modification and repair . Experience with box builds and electro-mechanical assemblies . Ability to confidently interpret engineering drawings, schematics and technical documentation. Strong attention to detail and a methodical approach to technical work. Ability to work to defined processes and quality standards. Strong troubleshooting and fault-finding capability. Ability to work effectively with engineers and communicate technical issues clearly. A self-motivated approach with the ability to work to tight project deadlines. Desirable Experience BGA rework experience. Experience with complex electronic or high-reliability assemblies. Experience supporting R&D, prototype or new product introduction (NPI) environments. Experience providing technical input into design for manufacture . Previous experience working within Defence, Aerospace or other highly regulated engineering environments . Why Join? This is an opportunity to join a technically advanced engineering environment where prototype technicians are closely integrated with the wider engineering community. You'll have the opportunity to work on challenging hardware development programmes, contribute practical engineering expertise and support the development of technologies across demanding applications.

VEHICLE TECHNICIAN Location: Houghton-Le-Spring Salary: Up to £35,500 Basic Salary OTE £52,000 Job Type: Full-Time, Permanent Looking for a role where your technical skills are recognised, your earning potential is rewarded, and your career can continue to progress? If you're a qualified Vehicle Technician looking to join a busy and successful main dealership, this is an excellent opportunity to maximise your earnings while working in a modern workshop with the latest manufacturer equipment. Offering a competitive basic salary, realistic earnings of up to £52,000 OTE, and an excellent range of employee benefits, this role provides everything you need to build a rewarding long-term career. Working alongside an experienced and supportive team, you'll have the opportunity to develop your technical expertise, work with the latest vehicle technology, and benefit from ongoing manufacturer training and genuine career progression within a business that values its technicians. WHAT'S IN IT FOR YOU? Up to £35,500 Basic Salary OTE Up to £52,000 Life Insurance Employee Discount Scheme Referral Programme Tool Insurance 33 Days Annual Leave Including Bank Holidays High Street Discount Scheme Ongoing Manufacturer Training & Development Career Progression Opportunities Supportive Team Environment Full-Time, Permanent Position THE ROLE As a Vehicle Technician, you'll be responsible for carrying out servicing, maintenance, diagnostics, and repairs to the highest standards while ensuring every vehicle is completed safely, efficiently, and in line with manufacturer requirements. Key responsibilities include: Carrying out vehicle servicing, maintenance, and repair work Diagnosing mechanical and electrical faults efficiently Completing repairs and maintenance to manufacturer standards Performing assembly operations with accuracy and attention to detail Ensuring compliance with manufacturer guidelines and health & safety regulations Accurately documenting completed service and repair work Providing technical support and advice where required Working collaboratively with the workshop team to maximise productivity Delivering exceptional workmanship and customer satisfaction ABOUT YOU We're keen to hear from candidates who can demonstrate: NVQ Level 3 in Vehicle Maintenance and Repair (essential) At least 2 years' experience as a Vehicle Technician / Vehicle Mechanic within the automotive industry Strong diagnostic and fault-finding skills MOT Tester Licence desirable but not essential Ownership of your own tools and toolbox A positive attitude with the ability to work effectively as part of a team Full UK Manual Driving Licence (subject to licence checks) The right to work in the UK (sponsorship is not available) Alternative job titles may include: Vehicle Technician, Vehicle Mechanic, Automotive Technician, Service Technician, Diagnostic Technician or Car Mechanic. APPLY TODAY This is an excellent opportunity to join a successful dealership that rewards performance, invests in its technicians, and offers genuine opportunities for career progression within a supportive working environment. If you're a skilled Vehicle Technician looking for your next challenge, we'd love to hear from you. Interested in finding out more? Apply today or contact Howard at Auto Skills for a confidential discussion about this Vehicle Technician opportunity, quoting job reference 53039.

About the Opportunity Our client is an innovative engineering and technology business developing advanced automated systems that are transforming industrial processes through cutting-edge robotics, AI and machine vision technology. Since its establishment, the company has experienced significant growth, delivering solutions to customers across the UK, Europe and the United States. This is an exciting opportunity to join a rapidly expanding engineering business where you will play an important role in the assembly, testing and installation of sophisticated electro-mechanical equipment. Working alongside experienced Engineers, Technicians and Project Managers, you will contribute to both product builds and continuous improvement initiatives within the workshop. Key Responsibilities Carry out electrical assembly, wiring and functional testing of products in the workshop and at customer sites. Assemble, test and install complex electro-mechanical systems to engineering specifications. Build, inspect and test mechanical and electrical sub-assemblies used across multiple product lines. Ensure all work is completed to the highest quality standards whilst maintaining full component traceability. Diagnose and resolve assembly, wiring and mechanical issues to minimise production delays. Provide feedback to Engineering and Production teams to support continuous improvement of products and manufacturing processes. Work closely with Engineers, Technicians and Project Managers to ensure projects are delivered on schedule. Maintain a safe, organised and efficient working environment. Skills & Experience Minimum of 4 years' experience in a hands-on technician or assembly role within an engineering or manufacturing environment. Strong experience with power and control panel wiring. Ability to read, understand and interpret electrical schematics and identify any discrepancies. Experience interpreting engineering documentation including assembly instructions, technical drawings and 3D CAD assemblies. Competent in routing and terminating electrical wiring, cabling, pneumatic tubing and conduit. Confident using a wide range of workshop equipment, hand tools and power tools safely. Excellent fault-finding and problem-solving skills with a practical engineering mindset. High attention to detail and a commitment to producing work to a consistently high standard. Proactive approach to identifying opportunities for continuous improvement within assembly and manufacturing processes. Strong communication skills and the ability to work effectively within a multidisciplinary engineering team. Flexible approach to work, with willingness to support occasional weekend work (time off in lieu provided). Whats On Offer A high level of ownership and autonomy within your role. A fast-paced engineering environment with genuine technical challenges. The opportunity to contribute to process improvements and best practice. Exposure to the complete product lifecycle, from assembly through to customer installation. Occasional travel across the UK and Europe to support installations, commissioning and fault finding (approximately twice per month). Career development within an innovative and rapidly growing engineering company. Additional Requirements Able to travel occasionally throughout the UK and Europe to support customer installations and commissioning. Must live within a commutable distance of East London, as this is a fully site-based position (5 days per week). Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Role: Electronic Test Engineer Location: Fareham Duration: 6 months (likely extensions) Rate: 27.50/hour PAYE Holiday entitlement - 25 day per annum (accrued) + pension scheme Shift pattern: 2pm - 10:30pm Mon - Thurs and 11am to 4pm Friday Position Summary Elevate your standards and embrace precision perfected, every detail, every line, speaks with precision, a masterpiece of engineering excellence! If you're a Test Technician who's looking for a new opportunity working for a customer focused, growing organization that will offer training, development and career progression. Responsibilities The Ideal candidate must be motivated to learn and routinely practice excellent calibration techniques, you will need to complete work according to business instructions, specifications and procedure. You ideally will be competent in reading drawings, conducting a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type equipment such as Pressure controllers, and ideally possess skills around basic engineering competencies, fine assembly, calibration and test procedures. Qualifications The Electronic Test Technician will: Sets up and operates equipment to test/calibrate units/subassemblies as per instructions, specifications, and procedures. Perform troubleshooting and failure analysis of analogue and digital circuitry to component level Provide detailed written failure description with root cause analysis to production and engineering. Follow written and verbal instructions, adheres to all company guidelines, policies and procedures. Carry out production/repair/assembly work as required within multiple departments on this site. Maintain a safe and clean work environment and follows company safety policies. Skills, Knowledge & Abilities: Well-organized, detail-oriented, ability to multi-task, the ability to understand and follow specific instructions and procedures Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines Skilled in the use of electronic test equipment, hand tools, power tools and electric soldering. Ability to read circuit diagrams. Ability to analyse and determine methods and procedures Proficient Microsoft Windows software applications If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

Mechanical Fitter (Metrology / OEM) £34,000 - £38,000 + In-House Training + International Travel + Progression + Annual Bonus + Enhanced Holidays + Company Benefits Bath Are you an experienced mechanical Technician, with knowledge of the aerospace industry or similar, looking to join a company who will provide you with exposure to advanced technologies and excellent training to develop your skillset? This company provide metrology and calibration solutions for precision engineering in the aerospace industry. They assemble and utilise their own bespoke equipment to precisely measure manufactured components for companies like Rolls Royce, GE Aerospace, NASA, and The MoD. On offer is the chance to become a vital asset to the business. The ideal candidate will have a strong background in mechanical engineering and electrical engineering, to be able to tackle fault finding, assembly and maintenance of the machines. You will be working in a team of skilled engineers, while undergoing on-the-job training for all of their bespoke equipment. This role would suit any mechanical fitter from the precision engineering/aerospace industry, looking to join a growing company who provide opportunities for career progression and performance bonuses. The role: Mechanical assembly of rotary tables and inspection systems Electrical wiring, integration, and basic fault finding during assembly Calibration of finished products to meet ISO and internal quality standards Conduct FAT tests and prepare equipment for dispatch Willingness to travel globally to install, commission, service, and calibrate systems at customer sites Diagnose and repair mechanical/electrical faults both in house and in the field The person: Experience in a mechanical technician role within the precision engineering industry NVQ level 3 in mechanical/electrical engineering or similar Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH26645a We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Mechanical Assembly Operative Location: Corsham Pay: 14.40 per hour Job Type: Ongoing Contract Full-Time Days Hours: Mon-Thurs 07:00-15:30 Fri 07:00-12:00 Immediate Start Available We are recruiting for a Mechanical Assembly Operative to join a leading engineering and manufacturing company within the rail industry. This role is ideal for candidates with mechanical, assembly, production, manufacturing, or hands-on experience, as well as those with a strong work ethic looking to develop technical skills. Full training is provided. Key Duties: Mechanical assembly and fitting Strip down, cleaning, and reassembly of components Use of hand tools and basic engineering equipment Following engineering drawings or work instructions Quality inspection and testing General production and manufacturing duties Skills & Experience: Mechanical, assembly, or manufacturing experience preferred Experience using hand tools (spanners, torque wrenches, etc.) Ability to follow instructions and processes Good attention to detail Backgrounds considered: assembly operative, production operative, warehouse operative, mechanical fitter, vehicle mechanic, technician This role would suit candidates with experience as: Mechanical Assembly Operative Mechanical Fitter / Assembler Vehicle Mechanic or Vehicle Technician Motor Mechanic Engineering Operative Apply today to be considered for this excellent long-term opportunity with a leading engineering manufacturer.

Mechanical Fitter Croydon £29,000 - £43,000 Basic + Up to 8% Bonus + Overtime + Early Finish Friday + Pension + Life Assurance + Dental Scheme + Cycle to Work + Job Stability + Training + Package Join a well-established and internationally recognised engineering manufacturer offering long-term job security, excellent staff retention and a supportive workshop environment. This is a fantastic opportunity for a Mechanical Fitter to become part of a highly skilled engineering team, working on specialist mechanical equipment while benefiting from ongoing training, overtime opportunities and an excellent benefits package. This company is renowned for its engineering excellence and quality standards, operating to ISO9001 and RISAS accreditation. Due to continued growth, they are looking to recruit multiple Mechanical Fitters to strengthen their workshop team. Your Role as a Mechanical Fitter Will Include: Mechanical fitting, assembly, overhaul and refurbishment of specialist equipment Stripping, surveying, inspecting and testing mechanical components Reading and interpreting engineering drawings Carrying out mechanical repairs within a workshop environment Completing technical documentation and inspection reports Working to high quality and health & safety standards The Successful Mechanical Fitter Will Need: Experience as a Mechanical Fitter, Mechanical Technician, Assembly Fitter or similar Workshop-based mechanical fitting or overhaul experience Experience working on rotating equipment is advantageous Ability to read engineering drawings Mechanical engineering qualification or apprenticeship preferred Commutable to Croydon Call Rebecka Van Ristell on for immediate consideration or apply today. This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are those of an Employment Agency. Please visit the Future Engineering Recruitment website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal right to work in the United Kingdom. Applications from candidates who do not currently hold this right cannot be processed. Whilst we endeavour to respond to all applicants, due to the high volume of applications we receive, we can only guarantee contact with candidates who have been shortlisted.

Right Now Group are currently partnered with an International Software client and industry leader who are closely linked to the Engineering sector. They have an open vacancy within their Field Service Engineering team. If you are an experienced field-based Electrician/Technician or have previous hands-on experience/ qualifications within any of the following areas, then this would be the ideal role for you! Vehicle Mechanics Electronics Re-manufacturing/Assembly General Maintenance/Engineering Facilities Maintenance Experience servicing Gaming/Arcade Machines, ATM's, EPOS/Chip & Pin, Parking machines or similar IMPORTANT: Full Training will be provided as well as a company van - please note all applicants must have a full drivers license due to the nature of this role. Job Title: Maintenance Engineer - Field based Weekly Hours: 40 hours (flexible) 5 in 7 days worked (time and a half on weekends) Salary : £32,000 - £34,000 Role Type: Full time - Permanent Location: Chelmsford/Colchester/Romford/Southend Maintenance Engineer Responsibilities Carry out Remedial Maintenance initiated by customer requests for service as directed Partake in and carry out machine installations and commissioning as required Ensure that all Technical Documentation is kept available and up to date Ensure that at all times you promote the Best Practise approach to your duties Complete all necessary Work Dockets and Reports as part of the Service and Maintenance procedures Assistance in maintenance of organisational charts for customers as a basis for the Networking Assisting in producing weekly and monthly reports Desirable skills Previous experience in a Field Service Engineering or Technician role Mechanical/Electrical knowledge, previous experience in maintenance or some form of mechanics/electrics Experience in working out on the road from a van or car Good customer relationship skills Flexible approach to working hours and days Able to work under pressure Have good problem-solving acumen Able to both work independently and also as part of a team

Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.

Field Operations Technician Greater Manchester £30,000 + Salary Progression + Fully Expensed Travel Are you looking for a hands-on role that combines travel, technology and working at some of the UK's leading sporting venues? Our client is an innovative technology business experiencing significant growth and is looking to add several Field Operations Technicians to its expanding team. This is a fantastic opportunity for someone who enjoys practical work, travelling across the UK and being part of a close-knit team delivering high-profile projects. The Role Working as part of a specialist operations team, you'll support the delivery of large-scale activations and projects at major sporting and event venues across the UK. The position is a blend of field-based work and depot-based preparation, offering plenty of variety and opportunities to develop new skills. Responsibilities Travelling to customer sites throughout the UK Assisting with installation and removal projects Preparing equipment and vehicles ahead of deployments Loading and unloading equipment Supporting project delivery on-site Carrying out routine equipment checks and maintenance Working closely with experienced team leaders Ensuring projects are completed safely and to a high standard About You We're looking for practical individuals who aren't afraid to roll their sleeves up and get stuck in. Candidates from the following backgrounds are encouraged to apply: Field Service Engineering Installation Engineering AV Installation Telecoms Events & Exhibitions Mechanical/Electrical Assembly Facilities or Grounds Maintenance Ex-Forces Warehouse & Logistics General Technical or Hands-On Roles Requirements Strong work ethic and positive attitude Happy travelling regularly across the UK Comfortable working outdoors when required Good communication skills Ability to work independently and within a team Flexible approach to working hours Full UK driving licence preferred What's on Offer? Starting salary of £30,000 Clear progression opportunities with salary increases following training Potential earnings of up to £40,000 within the first 6 months Fully expensed travel and accommodation Extensive training programme Opportunity to work at major sporting venues across the UK Long-term career development within a growing business Supportive team environment If you're looking for a role that offers variety, travel, training and genuine progression, we'd love to hear from you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Are you a forward thinking, motivated and career driven person looking to jump start your career with an innovative engineering manufacturer? We are recruiting for an Trainee Fitter to join the engine build & test team in a growing manufacturing business specialising in advanced mechanical products used within a highly technical industry. This is an excellent opportunity for someone who enjoys precision assembly, fault-finding, and testing, whilst working within a supportive and expanding team. In the role of a Trainee Fitter, you will be responsible for assembling, testing, and servicing a range of products to detailed engineering specifications. You will work closely with production and engineering teams to ensure products meet the highest quality standards before delivery. Key Responsibilities for the succesful Trainee Fitter: Assemble mechanical sub-assemblies and final products from engineering drawings and specifications Carry out component inspections and report any non-conformances Perform testing, calibration, and performance checks Diagnose faults and complete servicing, repairs, and refurbishment work Record test results and maintain accurate documentation Support prototype and development activities when required Use hand tools, power tools, and measuring equipment safely and accurately Ensure all work is completed in line with quality, health & safety, and company procedures Maintain a clean, organised, and efficient working environment The Ideal Candidate for this Trainee Fitter role: Previous experience within a mechanical assembly or engineering manufacturing environment Ability to read and interpret engineering drawings and specifications Strong fault-finding and problem-solving skills Experience using hand tools, power tools, and measuring equipment Close attention to detail with a focus on quality Methodical and organised approach to work Positive attitude and willingness to learn new skills Experience with testing, servicing, or calibration would be advantageous Benefits for the successful Trainee Fitter: Opportunity to join a growing and innovative engineering business Ongoing training and development Career progression opportunities Supportive and friendly working environment Interesting and varied technical work Competative salary 26,000- 30,000 depending on expereince If you are a practical, hands-on technician looking for your next challenge within a specialist engineering environment, we would love to hear from you.

Test Engineer, Basildon, up to 20.00 per hour Test Engineer jobs, Automotive Test Engineer jobs, EV Test Engineer jobs, Engineering Technician jobs. 12-month PAYE contract paying up to 20.00 per hour depending on experience. Join a leading automotive engineering business delivering electric vehicle and environmental testing programmes for major customers. Excellent opportunity for an engineering graduate, technician or early-career engineer to gain experience within a specialist automotive test environment. Are you an engineer or technician looking to develop your career within automotive testing and electrification? This role offers the opportunity to work within a multidisciplinary test facility, supporting customer projects through test preparation, execution, data collection and reporting. This Test Engineer job will suit: A Test Engineer, Graduate Engineer, Engineering Technician, Automotive Technician or Mechanical Engineer with practical engineering experience. Someone with experience working in a test, laboratory, workshop or engineering environment. Candidates familiar with instrumentation, data acquisition systems, test equipment and practical assembly work. You will hold a relevant BEng or MEng in mechanical engineering, electrical engineering, automotive engineering, or similar engineering discipline. Someone with strong attention to detail, good communication skills and the ability to work well within a team. Experience with EV systems, batteries, high voltage, CAN tools or environmental testing would be advantageous not 100% necessary. This Test Engineer job will involve: Preparing and setting up test equipment, instrumentation and components. Assisting with the development of test methods, procedures, rigs and fixtures. Carrying out testing in line with customer requirements, engineering standards and safety procedures. Collecting and reviewing test data, supporting technical reports and project documentation. Producing risk assessments and ensuring testing is completed safely. Working closely with engineers, technicians and customers to resolve technical challenges. Supporting continuous improvement activities across the test facility. This Test Engineer role is commutable from Basildon, Chelmsford, Southend-on-Sea, Brentwood, Billericay, Wickford, Rayleigh and surrounding areas. To apply, please send your CV to Sam Hilton at Euro Projects Recruitment Ltd. Please note that if you are not contacted within ten days, your application has not been successful

Location: Cambridge (CB25) Duration: Permanent Hours: 37.5 per week Flexible with core hours between 10am and 4pm (Monday to Friday) Salary: Competitive Job Reference: 36169 Polytec are looking for a Production Technician for our client based just north of Cambridge. Responsibilities: - Electro-mechanical assembly and testing of a variety of infrared thermal imaging related products - Production work ranging from cable assembly through to full system build and test, involving job and batch quantities - Manufacture and test of mechanical, optical and electronic assemblies - Component-level fault finding, troubleshooting and debugging - Recording and documenting assembly and test activities - Working as part of a production team to support the manufacture of high-quality products - Following engineering drawings, specifications and work instructions - Maintaining high standards of quality and attention to detail throughout the production process Requirements: - A formal Engineering or relevant technical qualification - Understanding of electronic fundamentals - Troubleshooting, fault finding and debugging skills - SMT soldering (to 0201) and PCB repair skills - Wiring and cable/harness assembly experience - Computer literate - Ability to read schematic designs - Proficient in the use of standard test equipment including oscilloscopes, DVMs and signal generators - Understanding of clean room techniques for opto-mechanical assembly Please contact us as soon as possible for more details or apply below!