Salary: competitive Hours: 40 hours per week Location: Airbus Portsmouth When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: 25 days of annual leave Access to our company pension scheme Free physiotherapy service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: Waste management (including weighing waste) Management of couriers, post, goods in/out Porterage services (lift & shift) where practical (ensuring H&S requirements are met) Daily completion of electronic records including logging of stores issued/courier services/volumes of post/reactive tasks/franking Report and repair any fabric/building faults identified whilst carrying out daily activities. Escort specialist subcontractors as instructed by the management and supervisory teams Deal with any complaints immediately and report them to the Team Supervisor Report faulty or damaged equipment to the relevant Supervisor What we're looking for: Ability to pass clearance check Experience in waste management operations including accurate weighing, recording, and disposal of waste materials Strong organisational and logistics coordination skills Proficiency in maintaining electronic records and data entry systems Building maintenance skills Interpersonal skills Driving licence What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.
Aug 13, 2026
Full time
Salary: competitive Hours: 40 hours per week Location: Airbus Portsmouth When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone. Whether you're looking to overhaul the industry, or just do a good day's work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture. What we can offer you: 25 days of annual leave Access to our company pension scheme Free physiotherapy service Discounts on everything from groceries to well known retailers Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to Ongoing training and development opportunities, allowing you to reach your full potential What you'll be doing: Waste management (including weighing waste) Management of couriers, post, goods in/out Porterage services (lift & shift) where practical (ensuring H&S requirements are met) Daily completion of electronic records including logging of stores issued/courier services/volumes of post/reactive tasks/franking Report and repair any fabric/building faults identified whilst carrying out daily activities. Escort specialist subcontractors as instructed by the management and supervisory teams Deal with any complaints immediately and report them to the Team Supervisor Report faulty or damaged equipment to the relevant Supervisor What we're looking for: Ability to pass clearance check Experience in waste management operations including accurate weighing, recording, and disposal of waste materials Strong organisational and logistics coordination skills Proficiency in maintaining electronic records and data entry systems Building maintenance skills Interpersonal skills Driving licence What's next? Apply today, so we can make a difference for generations to come. We're proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we're also transforming what it means to have a rewarding, purposeful career. We're dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles. We're also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive.
On behalf of our client, we are seeking to recruit an Engineering Configuration Manager for an initial 12-month contract. As the Engineering Configuration Manager, you will be part of the Wing Configuration Management (CM) team, working in a cross-functional integration role across all Wing programmes. You will be responsible for ensuring Configuration Management is integrated throughout the aircraft lifecycle, working closely with Engineering, Programmes, Airworthiness, and other supporting functions to maintain configuration integrity and support successful programme delivery. Role: Engineering Configuration Manager Pay: 38 per hour Via Umbrella Location: Filton Contract: Monday- Friday, 35 Hours per week, 12 Months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities Manage Engineering Change Process deliverables (stakeholder management) Support Our digital revolution strategy and play an active role to improve it as necessary. Manage workload capacity/priorities to ensure no risk to Aircraft delivery Engineering co-ordination of SB (Service Bulletin) dispatch dates for In Service Mods Manage Wing CM activities for Engineering specific design. Responsible for all transnational areas within the Wing CM domain across all Programs within the scope of the role. Manage Engineering Change activities for the lifecycle of the A/C. Collaborate with other functions including Program, Configuration Management, Airworthiness, In Service and Manufacturing communities to ensure deadlines are achieved. Anticipate upcoming challenges and communicate appropriately to all stakeholders. Implement corrective/preventative measures. Manage risks and opportunities in a transparent and concise manner. Provide support to the Multi Functional Team to apply the Processes and Methods correctly. Champion Best Practice and Lessons Learnt within the Airbus community. Opportunity to cross train and support the DMU (Digital Mock Up) team activities Opportunity to cross train and support the extended Digital Wing team in digitalisation / automation activities Perform any other activities as requested Essential Requirements Engineering/Aeronautical degree preferred / HNC or equivalent with 5+ years configuration management experience or similar Excellent stakeholder management. You will have a strong professional network (experts, architects, programmes, domains, Finance, Procurement, commercial, strategy etc) Excellent communication / presentation skills with the ability to provide clarity and present to executive level stakeholders Strong understanding of Configuration Management end to end change process Full Change Process experience / knowledge of Technical and Engineering Change Management Toolset knowledge preferred (Training available if required) ICC-CADB (Integrated Change Control-Constituent Assembly DataBase) ICC-ACP (Integrated Change Control-Constituent Aircraft Change Process) MCT (Mod Closure Tool) PrimesCCM (Primes Configuration Conformity Management) Legacy tools such as DPDS (Design Product Definition System) ACC2 (Aircraft Configuration Control) PDM Tools with a knowledge of Product Structure across Structure, Systems Installation and equipment domains If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Aug 12, 2026
Contractor
On behalf of our client, we are seeking to recruit an Engineering Configuration Manager for an initial 12-month contract. As the Engineering Configuration Manager, you will be part of the Wing Configuration Management (CM) team, working in a cross-functional integration role across all Wing programmes. You will be responsible for ensuring Configuration Management is integrated throughout the aircraft lifecycle, working closely with Engineering, Programmes, Airworthiness, and other supporting functions to maintain configuration integrity and support successful programme delivery. Role: Engineering Configuration Manager Pay: 38 per hour Via Umbrella Location: Filton Contract: Monday- Friday, 35 Hours per week, 12 Months contract IR35 Status: Inside Security Clearance : BPSS Responsibilities Manage Engineering Change Process deliverables (stakeholder management) Support Our digital revolution strategy and play an active role to improve it as necessary. Manage workload capacity/priorities to ensure no risk to Aircraft delivery Engineering co-ordination of SB (Service Bulletin) dispatch dates for In Service Mods Manage Wing CM activities for Engineering specific design. Responsible for all transnational areas within the Wing CM domain across all Programs within the scope of the role. Manage Engineering Change activities for the lifecycle of the A/C. Collaborate with other functions including Program, Configuration Management, Airworthiness, In Service and Manufacturing communities to ensure deadlines are achieved. Anticipate upcoming challenges and communicate appropriately to all stakeholders. Implement corrective/preventative measures. Manage risks and opportunities in a transparent and concise manner. Provide support to the Multi Functional Team to apply the Processes and Methods correctly. Champion Best Practice and Lessons Learnt within the Airbus community. Opportunity to cross train and support the DMU (Digital Mock Up) team activities Opportunity to cross train and support the extended Digital Wing team in digitalisation / automation activities Perform any other activities as requested Essential Requirements Engineering/Aeronautical degree preferred / HNC or equivalent with 5+ years configuration management experience or similar Excellent stakeholder management. You will have a strong professional network (experts, architects, programmes, domains, Finance, Procurement, commercial, strategy etc) Excellent communication / presentation skills with the ability to provide clarity and present to executive level stakeholders Strong understanding of Configuration Management end to end change process Full Change Process experience / knowledge of Technical and Engineering Change Management Toolset knowledge preferred (Training available if required) ICC-CADB (Integrated Change Control-Constituent Assembly DataBase) ICC-ACP (Integrated Change Control-Constituent Aircraft Change Process) MCT (Mod Closure Tool) PrimesCCM (Primes Configuration Conformity Management) Legacy tools such as DPDS (Design Product Definition System) ACC2 (Aircraft Configuration Control) PDM Tools with a knowledge of Product Structure across Structure, Systems Installation and equipment domains If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Concession Writer - A400M Wing Manufacture Filton 23.78 per hour PAYE / 31.82 per hour Umbrella About the Role Guidant Global is recruiting a Concession Writer to join the A400M Wing Manufacture programme at Filton on behalf of Airbus. This is a hands-on, high-impact role at the heart of production, where you'll author and manage technical concessions for manufacturing non-conformances, working closely with the shop floor and engineering teams to keep the assembly line moving. Beyond day-to-day concession management, you'll have the opportunity to get involved in Quality Improvement Projects, helping to drive root-cause analysis and long-term reductions in the Cost of Non-Quality across the programme. Key Responsibilities Concession & Non-Conformance Management Investigate manufacturing deviations on the A400M wing structure and author clear, accurate, and comprehensive technical concessions. Liaise directly with Design and Quality Engineering teams to ensure concessions are reviewed, validated, and approved in a timely manner. Log, track, and update non-conformance data in internal aerospace quality management systems (e.g. SAP) to maintain full traceability. Ensure all concessions comply with aviation regulatory standards, structural integrity requirements, and company quality procedures. Operational Support Work hand-in-hand with the A400M manufacturing operations team to resolve technical blockers swiftly and maintain assembly line tact time. Prioritise concession backlogs as directed by the Head of Business to align with monthly delivery targets and operational KPIs. Highlight potential production bottlenecks caused by recurring technical issues to operations leadership. Quality Improvement & Operational Performance Participate in and support cross-functional Quality Improvement Projects (QIPs) focused on root-cause analysis and permanent defect eradication. Collaborate with Manufacturing Engineering and Quality Assurance to implement Practical Problem Solving (PPS) methodologies, reducing the Cost of Non-Quality (CoNQ) and boosting operational performance. What We're Looking For Proven experience in aerospace manufacturing, specifically within wing structures, metallic/composite assembly, or aircraft quality environments. Strong ability to read and interpret engineering drawings, structural repair manuals, and technical specifications. Proficiency in aerospace drawing interrogation and use of SAP. Excellent written skills for drafting technical arguments, with the interpersonal skills needed to collaborate effectively between shop-floor operators and other support functions. Role Details Location: Filton (100% onsite) Hours: Monday to Thursday, 06:30-15:45 Pay: 31.82 per hour Umbrella / 23.78 per hour PAYE Security clearance: BPSS+ (completed by Airbus Security) Please note: this role is subject to ITAR restrictions How to Apply If you have the aerospace manufacturing background and technical eye for detail this role calls for, we'd love to hear from you. Apply now to join the A400M programme at Filton Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Aug 12, 2026
Contractor
Concession Writer - A400M Wing Manufacture Filton 23.78 per hour PAYE / 31.82 per hour Umbrella About the Role Guidant Global is recruiting a Concession Writer to join the A400M Wing Manufacture programme at Filton on behalf of Airbus. This is a hands-on, high-impact role at the heart of production, where you'll author and manage technical concessions for manufacturing non-conformances, working closely with the shop floor and engineering teams to keep the assembly line moving. Beyond day-to-day concession management, you'll have the opportunity to get involved in Quality Improvement Projects, helping to drive root-cause analysis and long-term reductions in the Cost of Non-Quality across the programme. Key Responsibilities Concession & Non-Conformance Management Investigate manufacturing deviations on the A400M wing structure and author clear, accurate, and comprehensive technical concessions. Liaise directly with Design and Quality Engineering teams to ensure concessions are reviewed, validated, and approved in a timely manner. Log, track, and update non-conformance data in internal aerospace quality management systems (e.g. SAP) to maintain full traceability. Ensure all concessions comply with aviation regulatory standards, structural integrity requirements, and company quality procedures. Operational Support Work hand-in-hand with the A400M manufacturing operations team to resolve technical blockers swiftly and maintain assembly line tact time. Prioritise concession backlogs as directed by the Head of Business to align with monthly delivery targets and operational KPIs. Highlight potential production bottlenecks caused by recurring technical issues to operations leadership. Quality Improvement & Operational Performance Participate in and support cross-functional Quality Improvement Projects (QIPs) focused on root-cause analysis and permanent defect eradication. Collaborate with Manufacturing Engineering and Quality Assurance to implement Practical Problem Solving (PPS) methodologies, reducing the Cost of Non-Quality (CoNQ) and boosting operational performance. What We're Looking For Proven experience in aerospace manufacturing, specifically within wing structures, metallic/composite assembly, or aircraft quality environments. Strong ability to read and interpret engineering drawings, structural repair manuals, and technical specifications. Proficiency in aerospace drawing interrogation and use of SAP. Excellent written skills for drafting technical arguments, with the interpersonal skills needed to collaborate effectively between shop-floor operators and other support functions. Role Details Location: Filton (100% onsite) Hours: Monday to Thursday, 06:30-15:45 Pay: 31.82 per hour Umbrella / 23.78 per hour PAYE Security clearance: BPSS+ (completed by Airbus Security) Please note: this role is subject to ITAR restrictions How to Apply If you have the aerospace manufacturing background and technical eye for detail this role calls for, we'd love to hear from you. Apply now to join the A400M programme at Filton Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
B1 Licensed Aircraft Engineer South Wales Salary 92k nights 86k days. (can sponsor) Working Hours Seasonal Shift 1: Monday - Thursday 07:00 - 18:15. Friday 07:00 - 14:30. Seasonal Shift 2: 5 days on/4 off, 5/4, 5/5 - 07:00 - 18:15 Seasonal Shift 3 : 7 days on/7 off - 07:00 - 18:15 The Role We are seeking experienced B1 Engineers to join a dedicated base maintenance team, responsible for scheduled and unscheduled maintenance across a range of commercial aircraft. This is a hands-on leadership role where you will supervise technicians and mechanics, manage resources effectively, and ensure full compliance with Part 145 regulations, company procedures and customer SLAs. Licensing and Type Ratings Valid B1 Aircraft Maintenance Engineer Licence (UK CAA AML or EASA AML) Current type rating and recency on either Boeing or Airbus family aircraft Desirable: Type rating and recency on Boeing 737 Classic/NG, 757, 767 or Airbus A320 family Willingness to complete further type training provided by the company Key Responsibilities Lead and supervise teams during base maintenance checks Mentor and delegate to junior staff to ensure smooth operations Complete and review all documentation in line with MOE and published procedures Report maintenance requirements and issues to planners and management in a timely manner Manage task timings and accuracy of bookings on task cards Oversee correct storage, racking and serviceability of aircraft components Maintain a clean, safe and compliant hangar environment, preventing FOD and upholding engineering best practice Recommend improvements to processes and working practices Fulfil responsibilities in line with company policies and risk management frameworks Requirements Minimum 5 years' aircraft maintenance experience, with at least 3 years in base maintenance Strong understanding of aircraft documentation and engineering practices Broad skill set across aircraft systems including rigging, component replacement and modifications Sound knowledge of structural assessment and repair In-depth understanding of aircraft systems
Aug 12, 2026
Full time
B1 Licensed Aircraft Engineer South Wales Salary 92k nights 86k days. (can sponsor) Working Hours Seasonal Shift 1: Monday - Thursday 07:00 - 18:15. Friday 07:00 - 14:30. Seasonal Shift 2: 5 days on/4 off, 5/4, 5/5 - 07:00 - 18:15 Seasonal Shift 3 : 7 days on/7 off - 07:00 - 18:15 The Role We are seeking experienced B1 Engineers to join a dedicated base maintenance team, responsible for scheduled and unscheduled maintenance across a range of commercial aircraft. This is a hands-on leadership role where you will supervise technicians and mechanics, manage resources effectively, and ensure full compliance with Part 145 regulations, company procedures and customer SLAs. Licensing and Type Ratings Valid B1 Aircraft Maintenance Engineer Licence (UK CAA AML or EASA AML) Current type rating and recency on either Boeing or Airbus family aircraft Desirable: Type rating and recency on Boeing 737 Classic/NG, 757, 767 or Airbus A320 family Willingness to complete further type training provided by the company Key Responsibilities Lead and supervise teams during base maintenance checks Mentor and delegate to junior staff to ensure smooth operations Complete and review all documentation in line with MOE and published procedures Report maintenance requirements and issues to planners and management in a timely manner Manage task timings and accuracy of bookings on task cards Oversee correct storage, racking and serviceability of aircraft components Maintain a clean, safe and compliant hangar environment, preventing FOD and upholding engineering best practice Recommend improvements to processes and working practices Fulfil responsibilities in line with company policies and risk management frameworks Requirements Minimum 5 years' aircraft maintenance experience, with at least 3 years in base maintenance Strong understanding of aircraft documentation and engineering practices Broad skill set across aircraft systems including rigging, component replacement and modifications Sound knowledge of structural assessment and repair In-depth understanding of aircraft systems
B1 Licensed Aircraft Engineer South Wales Salary £92k nights £86k days. (can sponsor) Working Hours Seasonal Shift 1: Monday - Thursday 07:00 - 18:15. Friday 07:00 - 14:30. Seasonal Shift 2: 5 days on/4 off, 5/4, 5/5 - 07:00 - 18:15 Seasonal Shift 3 : 7 days on/7 off - 07:00 - 18:15 The Role We are seeking experienced B1 Engineers to join a dedicated base maintenance team, responsible for scheduled and unscheduled maintenance across a range of commercial aircraft. This is a hands-on leadership role where you will supervise technicians and mechanics, manage resources effectively, and ensure full compliance with Part 145 regulations, company procedures and customer SLAs. Licensing and Type Ratings * Valid B1 Aircraft Maintenance Engineer Licence (UK CAA AML or EASA AML) * Current type rating and recency on either Boeing or Airbus family aircraft * Desirable: Type rating and recency on Boeing 737 Classic/NG, 757, 767 or Airbus A320 family * Willingness to complete further type training provided by the company Key Responsibilities * Lead and supervise teams during base maintenance checks * Mentor and delegate to junior staff to ensure smooth operations * Complete and review all documentation in line with MOE and published procedures * Report maintenance requirements and issues to planners and management in a timely manner * Manage task timings and accuracy of bookings on task cards * Oversee correct storage, racking and serviceability of aircraft components * Maintain a clean, safe and compliant hangar environment, preventing FOD and upholding engineering best practice * Recommend improvements to processes and working practices * Fulfil responsibilities in line with company policies and risk management frameworks Requirements * Minimum 5 years' aircraft maintenance experience, with at least 3 years in base maintenance * Strong understanding of aircraft documentation and engineering practices * Broad skill set across aircraft systems including rigging, component replacement and modifications * Sound knowledge of structural assessment and repair * In-depth understanding of aircraft systems
Aug 11, 2026
Full time
B1 Licensed Aircraft Engineer South Wales Salary £92k nights £86k days. (can sponsor) Working Hours Seasonal Shift 1: Monday - Thursday 07:00 - 18:15. Friday 07:00 - 14:30. Seasonal Shift 2: 5 days on/4 off, 5/4, 5/5 - 07:00 - 18:15 Seasonal Shift 3 : 7 days on/7 off - 07:00 - 18:15 The Role We are seeking experienced B1 Engineers to join a dedicated base maintenance team, responsible for scheduled and unscheduled maintenance across a range of commercial aircraft. This is a hands-on leadership role where you will supervise technicians and mechanics, manage resources effectively, and ensure full compliance with Part 145 regulations, company procedures and customer SLAs. Licensing and Type Ratings * Valid B1 Aircraft Maintenance Engineer Licence (UK CAA AML or EASA AML) * Current type rating and recency on either Boeing or Airbus family aircraft * Desirable: Type rating and recency on Boeing 737 Classic/NG, 757, 767 or Airbus A320 family * Willingness to complete further type training provided by the company Key Responsibilities * Lead and supervise teams during base maintenance checks * Mentor and delegate to junior staff to ensure smooth operations * Complete and review all documentation in line with MOE and published procedures * Report maintenance requirements and issues to planners and management in a timely manner * Manage task timings and accuracy of bookings on task cards * Oversee correct storage, racking and serviceability of aircraft components * Maintain a clean, safe and compliant hangar environment, preventing FOD and upholding engineering best practice * Recommend improvements to processes and working practices * Fulfil responsibilities in line with company policies and risk management frameworks Requirements * Minimum 5 years' aircraft maintenance experience, with at least 3 years in base maintenance * Strong understanding of aircraft documentation and engineering practices * Broad skill set across aircraft systems including rigging, component replacement and modifications * Sound knowledge of structural assessment and repair * In-depth understanding of aircraft systems
Compliance Investigator (x2) Oxford - Hybrid (3 days onsite minimum) 12-month contract 24.89 per hour PAYE / 33.29 per hour Umbrella About the role Guidant Global is recruiting on behalf of Airbus Helicopters UK for two Compliance Investigators to join the Compliance team at their Oxford site - home to Britain's civil helicopter hub and the world's largest helicopter manufacturer. This is a fantastic opportunity to play a key role in maintaining regulatory and operational compliance within a Helicopter Maintenance Repair Organisation (MRO). You'll investigate compliance-related issues, get to the root of what's really going on, and help drive the corrective and preventive actions that keep operations safe, standard-compliant, and continuously improving. What you'll be doing Compliance investigations & root cause analysis Conduct thorough investigations into compliance-related incidents, discrepancies, and safety concerns, including MEDA investigations where required Apply Root Cause Analysis (RCA) methodologies - such as 5 Whys, Fishbone Diagrams, and Fault Tree Analysis - to get to the underlying issue Identify Human Factors and Human Performance issues Spot trends and systemic issues, ensuring corrective actions are sustainable Regulatory & quality assurance Ensure adherence to UK CAA/EASA Part 145, UK CAA/EASA Part CAMO, UK CAA/EASA Part 21G, MAA MRP145/MIL CAMO, and company-specific MRO standards Work closely with Quality Assurance teams to develop and maintain effective audit and inspection processes Support regulatory audits and coordinate responses to findings, ensuring non-conformances are resolved promptly Process improvement & risk mitigation Collaborate with cross-functional teams to improve maintenance procedures and operational efficiency Recommend and implement risk mitigation strategies based on investigation findings Promote best practice in safety, human factors, and compliance monitoring Stakeholder engagement & reporting Provide detailed investigation reports and recommendations to senior management and regulatory bodies Engage with maintenance, engineering, production, and safety teams to build compliance awareness Maintain investigation records and track corrective and preventive actions (CAPA) What we're looking for Essential Proven experience in compliance investigations within an aviation maintenance organisation or aerospace environment Strong expertise in Root Cause Analysis and problem-solving methodologies In-depth knowledge of EASA Part 145, UK CAA regulations, and industry safety standards Knowledge of Human Factors principles, including Human Performance and limitations Ability to analyse technical documentation, maintenance records, and regulatory requirements Experience conducting audits and inspections within a maintenance organisation Excellent report writing, analytical, and presentation skills Proficiency with compliance monitoring tools, quality management systems (QMS), and data analysis software Formal training in RCA and investigative techniques Eligible for DBS Security Clearance Desirable Experience with Lean, Six Sigma, or continuous improvement methodologies Experience in MEDA investigations Knowledge of UK CAA/EASA Part CAMO, Part 21G, MAA regulations, MRP145, and MIL CAMO Knowledge of ISO 9001 and AS9100 aviation standards Certification in Aviation Safety Management Systems (SMS) Certification as an Aviation Auditor or Lead Auditor Lean Six Sigma Green or Black Belt certification Strong interpersonal skills, comfortable engaging stakeholders from technicians to senior leadership The details Hours: Monday-Friday, 08:30-17:00 (37.5 hours per week) Contract: 12 months, with strong potential for extension Location: Oxford, hybrid working with a minimum of 3 days onsite per week IR35: Inside Security: DBS clearance required Ready to apply? If you're an experienced compliance professional with an aviation or aerospace background, we'd love to hear from you. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Aug 08, 2026
Contractor
Compliance Investigator (x2) Oxford - Hybrid (3 days onsite minimum) 12-month contract 24.89 per hour PAYE / 33.29 per hour Umbrella About the role Guidant Global is recruiting on behalf of Airbus Helicopters UK for two Compliance Investigators to join the Compliance team at their Oxford site - home to Britain's civil helicopter hub and the world's largest helicopter manufacturer. This is a fantastic opportunity to play a key role in maintaining regulatory and operational compliance within a Helicopter Maintenance Repair Organisation (MRO). You'll investigate compliance-related issues, get to the root of what's really going on, and help drive the corrective and preventive actions that keep operations safe, standard-compliant, and continuously improving. What you'll be doing Compliance investigations & root cause analysis Conduct thorough investigations into compliance-related incidents, discrepancies, and safety concerns, including MEDA investigations where required Apply Root Cause Analysis (RCA) methodologies - such as 5 Whys, Fishbone Diagrams, and Fault Tree Analysis - to get to the underlying issue Identify Human Factors and Human Performance issues Spot trends and systemic issues, ensuring corrective actions are sustainable Regulatory & quality assurance Ensure adherence to UK CAA/EASA Part 145, UK CAA/EASA Part CAMO, UK CAA/EASA Part 21G, MAA MRP145/MIL CAMO, and company-specific MRO standards Work closely with Quality Assurance teams to develop and maintain effective audit and inspection processes Support regulatory audits and coordinate responses to findings, ensuring non-conformances are resolved promptly Process improvement & risk mitigation Collaborate with cross-functional teams to improve maintenance procedures and operational efficiency Recommend and implement risk mitigation strategies based on investigation findings Promote best practice in safety, human factors, and compliance monitoring Stakeholder engagement & reporting Provide detailed investigation reports and recommendations to senior management and regulatory bodies Engage with maintenance, engineering, production, and safety teams to build compliance awareness Maintain investigation records and track corrective and preventive actions (CAPA) What we're looking for Essential Proven experience in compliance investigations within an aviation maintenance organisation or aerospace environment Strong expertise in Root Cause Analysis and problem-solving methodologies In-depth knowledge of EASA Part 145, UK CAA regulations, and industry safety standards Knowledge of Human Factors principles, including Human Performance and limitations Ability to analyse technical documentation, maintenance records, and regulatory requirements Experience conducting audits and inspections within a maintenance organisation Excellent report writing, analytical, and presentation skills Proficiency with compliance monitoring tools, quality management systems (QMS), and data analysis software Formal training in RCA and investigative techniques Eligible for DBS Security Clearance Desirable Experience with Lean, Six Sigma, or continuous improvement methodologies Experience in MEDA investigations Knowledge of UK CAA/EASA Part CAMO, Part 21G, MAA regulations, MRP145, and MIL CAMO Knowledge of ISO 9001 and AS9100 aviation standards Certification in Aviation Safety Management Systems (SMS) Certification as an Aviation Auditor or Lead Auditor Lean Six Sigma Green or Black Belt certification Strong interpersonal skills, comfortable engaging stakeholders from technicians to senior leadership The details Hours: Monday-Friday, 08:30-17:00 (37.5 hours per week) Contract: 12 months, with strong potential for extension Location: Oxford, hybrid working with a minimum of 3 days onsite per week IR35: Inside Security: DBS clearance required Ready to apply? If you're an experienced compliance professional with an aviation or aerospace background, we'd love to hear from you. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Manufacturing Engineer Pay Rate: 35 p/h Outside IR35 Job Description: Seeking a Manufacturing Engineer to be based on-site supporting a customer program in Prestwick. The desired candidate will have a proven track record in Manufacturing Engineering roles, within an aerospace or defence manufacturing facility. The role will be accountable for the management and development of accurate Bills of Materials (BOM) maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Additionally, the role will manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes, as well as deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. The role also supports and take the lead on the Translation of Design Data (for example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. The primary responsibilities include: Responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. Accountable for the maintenance and development of suppliers/conditions of supply. Responsible for supporting Continuous Improvement to achieve significant productivity and quality improvements by: Analysing and eliminating waste (seven wastes). Developing and implementing production smoothing methods and Kanban systems. Identifying and implementing methods to reduce set-up and overall cycle times. Effective use of problem solving tools and techniques. Responsible for the definition of hard to satisfy quality standards and optimise long term manufacturing costs. Responsible for manipulating CAD data to support work activities when required. Support the MRB process by providing engineering instructions relating to rework, scrap and future prevention of non-conforming products. Implement visible control and business support systems in order to demonstrate effective management and control. Liaising with operators, design and regulatory authorities to ensure product integrity and compliance. Responsible for checking and acceptance of new and modified design models and drawings as approved signatories. Responsible for provision of engineering/manufacturing support to external customers and contractors. Responsible for the creation, maintenance and auditing of Engineering processes. Assisting with product audits, identifying and implementing corrective actions. Assisting with the close out of customer non-conformances. Work closely with Design to identify and implement cost reduction initiatives and quality improvements. The right candidate will have the following background and experience: Preferably be qualified to HNC level or equivalent in a related discipline. Have 2 years relevant engineering experience within a Manufacturing Engineering environment. Good communication skills - interface with customers and suppliers. Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc. Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus. A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access.
Oct 07, 2025
Contractor
Manufacturing Engineer Pay Rate: 35 p/h Outside IR35 Job Description: Seeking a Manufacturing Engineer to be based on-site supporting a customer program in Prestwick. The desired candidate will have a proven track record in Manufacturing Engineering roles, within an aerospace or defence manufacturing facility. The role will be accountable for the management and development of accurate Bills of Materials (BOM) maintained within the Enterprise Resource Planning System. Ensure that valid Engineering Processes are deployed within the manufacturing process and effectively detailed within the process routing to satisfy requirements of the business MRPII disciplines. Additionally, the role will manage the formal Engineering Changes communicated and agreed with the customer and valid agreed internal changes, as well as deploy the Continuous Improvement toolset to enable productivity and product quality improvements to be implemented in support of business and customer requirements both internal and within the supply chain. The role also supports and take the lead on the Translation of Design Data (for example CAD/CATIA) and specifications into clear and concise work instructions for manufacturing products to customer and regulatory authority requirements. The primary responsibilities include: Responsible for the translation of Design Engineering data and specifications into clear and concise work instructions for manufacturing assemblies or product to customer and regulatory authority requirements. Accountable for the maintenance and development of suppliers/conditions of supply. Responsible for supporting Continuous Improvement to achieve significant productivity and quality improvements by: Analysing and eliminating waste (seven wastes). Developing and implementing production smoothing methods and Kanban systems. Identifying and implementing methods to reduce set-up and overall cycle times. Effective use of problem solving tools and techniques. Responsible for the definition of hard to satisfy quality standards and optimise long term manufacturing costs. Responsible for manipulating CAD data to support work activities when required. Support the MRB process by providing engineering instructions relating to rework, scrap and future prevention of non-conforming products. Implement visible control and business support systems in order to demonstrate effective management and control. Liaising with operators, design and regulatory authorities to ensure product integrity and compliance. Responsible for checking and acceptance of new and modified design models and drawings as approved signatories. Responsible for provision of engineering/manufacturing support to external customers and contractors. Responsible for the creation, maintenance and auditing of Engineering processes. Assisting with product audits, identifying and implementing corrective actions. Assisting with the close out of customer non-conformances. Work closely with Design to identify and implement cost reduction initiatives and quality improvements. The right candidate will have the following background and experience: Preferably be qualified to HNC level or equivalent in a related discipline. Have 2 years relevant engineering experience within a Manufacturing Engineering environment. Good communication skills - interface with customers and suppliers. Knowledge of engineering systems and the ability to deploy the Continuous Improvement Toolset - Seven Wastes etc. Awareness of drawings and systems as applied within our major customers such as Boeing and Airbus. A good working knowledge of Microsoft Packages - Word, PowerPoint, Excel and Access.
Fuel Systems Engineer - R&T (SafeLeak Project) Location: Filton (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: £43.47/hr PAYE £57.50/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about shaping the future of aerospace technology? Join us as a Fuel Systems Engineer and play a pivotal role in leading the SafeL click apply for full job details
Oct 04, 2025
Contractor
Fuel Systems Engineer - R&T (SafeLeak Project) Location: Filton (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: £43.47/hr PAYE £57.50/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about shaping the future of aerospace technology? Join us as a Fuel Systems Engineer and play a pivotal role in leading the SafeL click apply for full job details
Technical Data Engineer - Airbus Location: Filton, Bristol (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: 33.64/hr PAYE 45.00/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about aviation and technical documentation? Join Airbus as a Technical Data Engineer and play a vital part in supporting the safety and efficiency of aircraft operations worldwide. You'll be part of a dynamic, transnational team responsible for producing and delivering maintenance manuals and documentation for our customers, with a focus on landing gear systems. This is a fantastic opportunity to work within the Filton systems team, providing high-quality technical data and maintenance manuals (AMM and TSM) to airlines and operators. You'll be at the heart of ensuring aircraft are maintained safely and efficiently throughout their lifecycle. Key Responsibilities Deliver high-quality documentation: Produce and update Aircraft Maintenance Manuals (AMM) and Troubleshooting Manuals (TSM) for landing gear systems, ensuring accuracy and compliance with EASA regulations. Support customers: Provide daily support to airlines and operators, answering queries and resolving issues to keep aircraft flying safely. Collaborate and lead: Chair review meetings with design offices and subcontractors, manage workloads, and ensure timely delivery of documentation. Continuous improvement: Propose and implement enhancements to technical data processes, documentation production, and digital initiatives. Quality and compliance: Uphold safety rules, quality standards, and technical data guidelines, acting with integrity and commitment to compliance. Customer interface: Represent the department at decision-making meetings and provide feedback on customer needs. About You We're looking for someone with: Aerospace engineering or aircraft maintenance experience Strong knowledge of aircraft maintenance, systems, and production processes Awareness of international authoring standards and tools Experience in aircraft configuration management A dynamic, proactive, and positive mindset Excellent communication and organisational skills Curiosity and openness to change and continuous improvement Ability to work collaboratively and manage priorities Hands-on experience with aircraft (e.g., RAF or similar) is highly desirable, but we also welcome applications from technical writers with relevant expertise. Ready to take your career to new heights? Apply now and join Guidant Global in partnership with Airbus, where your expertise will help keep the world's aircraft safe, efficient, and ready for tomorrow.
Oct 01, 2025
Contractor
Technical Data Engineer - Airbus Location: Filton, Bristol (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: 33.64/hr PAYE 45.00/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about aviation and technical documentation? Join Airbus as a Technical Data Engineer and play a vital part in supporting the safety and efficiency of aircraft operations worldwide. You'll be part of a dynamic, transnational team responsible for producing and delivering maintenance manuals and documentation for our customers, with a focus on landing gear systems. This is a fantastic opportunity to work within the Filton systems team, providing high-quality technical data and maintenance manuals (AMM and TSM) to airlines and operators. You'll be at the heart of ensuring aircraft are maintained safely and efficiently throughout their lifecycle. Key Responsibilities Deliver high-quality documentation: Produce and update Aircraft Maintenance Manuals (AMM) and Troubleshooting Manuals (TSM) for landing gear systems, ensuring accuracy and compliance with EASA regulations. Support customers: Provide daily support to airlines and operators, answering queries and resolving issues to keep aircraft flying safely. Collaborate and lead: Chair review meetings with design offices and subcontractors, manage workloads, and ensure timely delivery of documentation. Continuous improvement: Propose and implement enhancements to technical data processes, documentation production, and digital initiatives. Quality and compliance: Uphold safety rules, quality standards, and technical data guidelines, acting with integrity and commitment to compliance. Customer interface: Represent the department at decision-making meetings and provide feedback on customer needs. About You We're looking for someone with: Aerospace engineering or aircraft maintenance experience Strong knowledge of aircraft maintenance, systems, and production processes Awareness of international authoring standards and tools Experience in aircraft configuration management A dynamic, proactive, and positive mindset Excellent communication and organisational skills Curiosity and openness to change and continuous improvement Ability to work collaboratively and manage priorities Hands-on experience with aircraft (e.g., RAF or similar) is highly desirable, but we also welcome applications from technical writers with relevant expertise. Ready to take your career to new heights? Apply now and join Guidant Global in partnership with Airbus, where your expertise will help keep the world's aircraft safe, efficient, and ready for tomorrow.
Technical Data Engineer - Airbus Location: Filton, Bristol (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: £33.64/hr PAYE £45.00/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about aviation and technical documentation? Join Airbus as a Technical Data Engineer and play a vital part in supporting the safety and efficiency of aircraft operations worldwide. You'll be part of a dynamic, transnational team responsible for producing and delivering maintenance manuals and documentation for our customers, with a focus on landing gear systems. This is a fantastic opportunity to work within the Filton systems team, providing high-quality technical data and maintenance manuals (AMM and TSM) to airlines and operators. You'll be at the heart of ensuring aircraft are maintained safely and efficiently throughout their lifecycle. Key Responsibilities Deliver high-quality documentation: Produce and update Aircraft Maintenance Manuals (AMM) and Troubleshooting Manuals (TSM) for landing gear systems, ensuring accuracy and compliance with EASA regulations. Support customers: Provide daily support to airlines and operators, answering queries and resolving issues to keep aircraft flying safely. Collaborate and lead: Chair review meetings with design offices and subcontractors, manage workloads, and ensure timely delivery of documentation. Continuous improvement: Propose and implement enhancements to technical data processes, documentation production, and digital initiatives. Quality and compliance: Uphold safety rules, quality standards, and technical data guidelines, acting with integrity and commitment to compliance. Customer interface: Represent the department at decision-making meetings and provide feedback on customer needs. About You We're looking for someone with: Aerospace engineering or aircraft maintenance experience Strong knowledge of aircraft maintenance, systems, and production processes Awareness of international authoring standards and tools Experience in aircraft configuration management A dynamic, proactive, and positive mindset Excellent communication and organisational skills Curiosity and openness to change and continuous improvement Ability to work collaboratively and manage priorities Hands-on experience with aircraft (e.g., RAF or similar) is highly desirable, but we also welcome applications from technical writers with relevant expertise. Ready to take your career to new heights? Apply now and join Guidant Global in partnership with Airbus, where your expertise will help keep the world's aircraft safe, efficient, and ready for tomorrow.
Oct 01, 2025
Full time
Technical Data Engineer - Airbus Location: Filton, Bristol (60% onsite) Hours: 35 per week (4.5 days, flexible between 7am-7pm) Pay: £33.64/hr PAYE £45.00/hr Umbrella Security Clearance: BPSS+ (completed by Airbus Security) IR35: Inside About the Role Are you passionate about aviation and technical documentation? Join Airbus as a Technical Data Engineer and play a vital part in supporting the safety and efficiency of aircraft operations worldwide. You'll be part of a dynamic, transnational team responsible for producing and delivering maintenance manuals and documentation for our customers, with a focus on landing gear systems. This is a fantastic opportunity to work within the Filton systems team, providing high-quality technical data and maintenance manuals (AMM and TSM) to airlines and operators. You'll be at the heart of ensuring aircraft are maintained safely and efficiently throughout their lifecycle. Key Responsibilities Deliver high-quality documentation: Produce and update Aircraft Maintenance Manuals (AMM) and Troubleshooting Manuals (TSM) for landing gear systems, ensuring accuracy and compliance with EASA regulations. Support customers: Provide daily support to airlines and operators, answering queries and resolving issues to keep aircraft flying safely. Collaborate and lead: Chair review meetings with design offices and subcontractors, manage workloads, and ensure timely delivery of documentation. Continuous improvement: Propose and implement enhancements to technical data processes, documentation production, and digital initiatives. Quality and compliance: Uphold safety rules, quality standards, and technical data guidelines, acting with integrity and commitment to compliance. Customer interface: Represent the department at decision-making meetings and provide feedback on customer needs. About You We're looking for someone with: Aerospace engineering or aircraft maintenance experience Strong knowledge of aircraft maintenance, systems, and production processes Awareness of international authoring standards and tools Experience in aircraft configuration management A dynamic, proactive, and positive mindset Excellent communication and organisational skills Curiosity and openness to change and continuous improvement Ability to work collaboratively and manage priorities Hands-on experience with aircraft (e.g., RAF or similar) is highly desirable, but we also welcome applications from technical writers with relevant expertise. Ready to take your career to new heights? Apply now and join Guidant Global in partnership with Airbus, where your expertise will help keep the world's aircraft safe, efficient, and ready for tomorrow.
Carbon60 is seeking a talented and experienced Design Wing Integrator to join their client based in Broughton. As the Design Wing Integrator, you will play a crucial role in leading projects and activities, ensuring technical solutions are delivered to the highest standards of performance management. The Design Wing Integrator will act as the link between Engineering and Operations, collaborating to develop co-design solutions that are suitable for the industrial system while maintaining an engineering and customer-centric perspective. You will support the prioritization of engineering responses to operational issues and manage engineering suppliers to achieve these prioritized deliverables. Key Responsibilities: - Lead projects and activities through best-in-class performance management to ensure technical solutions are right the first time and enable a full end-to-end solution for design changes. - Provide proactive product improvement support, which includes modifications to reduce Recurring Costs, Non-Recurring Costs, and Non-Conformances throughout the value stream. - Support and/or lead initiatives to enhance team efficiency and effectiveness through the application of methods, tools, processes, and other capability improvements. - Anticipate risks and opportunities, and manage them appropriately to deliver on time, cost, and quality while embracing change and challenge. Qualifications and Skills: - Demonstrated ability to own problems and find solutions to deliver the best possible outcomes. - Proven experience in working with new challenges and bringing new ideas and concepts to meet business needs. - Proactive and self-driven, with the ability to work autonomously and as a strong team player. - Excellent time management, problem-solving, and decision-making skills. - Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. - Familiarity with Airbus processes and systems is highly desirable. If you are interested in this position and would like to know more, please contact Carbon60 Fareham. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
Sep 22, 2025
Contractor
Carbon60 is seeking a talented and experienced Design Wing Integrator to join their client based in Broughton. As the Design Wing Integrator, you will play a crucial role in leading projects and activities, ensuring technical solutions are delivered to the highest standards of performance management. The Design Wing Integrator will act as the link between Engineering and Operations, collaborating to develop co-design solutions that are suitable for the industrial system while maintaining an engineering and customer-centric perspective. You will support the prioritization of engineering responses to operational issues and manage engineering suppliers to achieve these prioritized deliverables. Key Responsibilities: - Lead projects and activities through best-in-class performance management to ensure technical solutions are right the first time and enable a full end-to-end solution for design changes. - Provide proactive product improvement support, which includes modifications to reduce Recurring Costs, Non-Recurring Costs, and Non-Conformances throughout the value stream. - Support and/or lead initiatives to enhance team efficiency and effectiveness through the application of methods, tools, processes, and other capability improvements. - Anticipate risks and opportunities, and manage them appropriately to deliver on time, cost, and quality while embracing change and challenge. Qualifications and Skills: - Demonstrated ability to own problems and find solutions to deliver the best possible outcomes. - Proven experience in working with new challenges and bringing new ideas and concepts to meet business needs. - Proactive and self-driven, with the ability to work autonomously and as a strong team player. - Excellent time management, problem-solving, and decision-making skills. - Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. - Familiarity with Airbus processes and systems is highly desirable. If you are interested in this position and would like to know more, please contact Carbon60 Fareham. Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.
