21 jobs found

Airframe Fitter Location: Cambridge, CB5 8RX Contract: 12-month rolling contract (long-term approx. 3 years of work) Start Date: From January (later starts available) Hours: 5-5-4 shift pattern, 07 00 Weekly Hours: Approx. 40 hours + overtime (up to 50 hours total) Pay Rate: £27.97 PAYE / £38.48 Umbrella Morson Edge are recruiting for an experienced Airframe Fitter to support long-term aircraft maintenance and modification programmes based in Cambridge. This is a long-term contract opportunity offering stability, consistent overtime, and the chance to work within a highly regarded aerospace environment. Reporting to a Technician or Team Leader, the successful candidate will carry out aircraft structural and mechanical maintenance tasks in accordance with approved documentation, ensuring the highest standards of safety, compliance, and workmanship. Key Responsibilities Carry out maintenance, modification, and repair activities on aircraft structures and mechanical systems in line with approved work instructions Ensure compliance with all airworthiness, HSE, and procedural requirements Work in accordance with tool control, document control, system updates, and certification processes Accurately record time and complete all required aircraft documentation Maintain a consistently high standard of workmanship Remove and install aircraft components, parts, and panels, including work in confined spaces and fuel tanks Assist with aircraft movement, jacking, and trestling activities Clean aircraft, components, parts, and tooling to support inspection and maintenance Carry out repairs to aircraft structures and components as required Refit or replace defective parts using hand and power tools Assist with testing aircraft parts using gauges and instruments Interpret work cards, work orders, technical drawings, blueprints, and manufacturer instructions Operate cranes, hoists, and lifting equipment safely Order materials, parts, and equipment when required Communicate effectively with team members to coordinate maintenance activities Support continuous improvement initiatives and undertake additional duties as directed Skills & Capabilities Strong attention to detail Ability to work effectively as part of a team High levels of integrity and professionalism Good problem-solving skills Proactive approach with a focus on continuous improvement Qualifications & Experience Completion of a recognised Engineering apprenticeship or an NVQ Level 3 (or equivalent) Proven experience carrying out aircraft maintenance on large transport aircraft Experience in maintenance checks, structural repairs, component maintenance, and flight control rigging C-130 experience advantageous but not essential What s on Offer Long-term contract with up to 3 years of work Competitive pay rates with overtime available Stable shift pattern and consistent workload Opportunity to work on complex aircraft programmes within a well-established aerospace organisation

Morson are recruiting for Skilled Fitters to work in Bristol for our prestigious client, at their site in Western Approach. Roles are also 6 months ongoing with poss temp to perm opportunity after 6 months PROFILE As a Skilled Composite Aircraft Fitter, you will be involved in working on a range of aircraft main wing assemblies and sub-assemblies from detail parts, whilst embracing appropriate assembly techniques, tools and fixtures, in accordance with the appropriate technical data and competencies. Assemble composite and metallic aircraft components in line with design and engineering requirements. KEY DELIVERABLES • Assemble and trim composite and metallic aircraft components • Drilling/Reaming/Countersinking of composite and metallic components • Set aircraft components in calibrated build jigs. • Deburring and under head radius of aircraft components and assemblies • Fettling using approved and calibrated setting tools • Use of nut runners and pre-set torque guns for bolting • Participate fully in local continuous improvement activities • Work in line with Health & Safety site requirements QUALIFICATIONS • Apprenticeship or NVQ3 or City and Guilds Level 3. • Minimum 3 years relevant trade experience assembling aircraft components using drawings and processes. • If CV accepted will need to attend a Trade Test on site involving drilling, riveting and countersinking working with Composite KEY SKILLS • Ability to assemble and trim composite and ancillary materials to close tolerances • Good hand skills and co-ordination • Understand aircraft drawings, limits and quality systems • Ability to operate CNC machines and processes as required • Self-motivated team player with good communication and interpersonal skills • Ability to work both alone and in small teams • Ability and willingness to undertake training and understanding of composite manufacturing techniques and processes • To take responsibility to self-certify own work • Working knowledge of IT systems including SAP and Microsoft packages SHIFT PATTERN • Averaged 37.5 per week • 12/6.5 - Day Shift • Week 1: Monday, Tuesday, Friday, Saturday, 6am-6pm Sunday 6am 12noon • Week 2: Wednesday, Thursday 6am-6pm RATE PAYE • £23.04 once on shift (£18.43 PAYE on days whilst training, approx. 2 weeks) - Once stamp obtained (about 3 months) the rate goes up to £24.06 • £27.65 overtime in the week • £36.86 overtime weekends

Job Purpose The role of the unlicensed Aircraft Engineer required to perform aircraft maintenance tasks on their A400M fleet in accordance with Technical Documentation & Company Procedures. Key Responsibilities Carry out aircraft maintenance tasks as directed by their Hangar Foreman, SLE or LE, providing assistance to other staff (any trade) to ensure safe and effective working practices. Ensure you are booked to task and to advise Hangar Foreman if additional time is required to complete a task. Carry out movement of heavy equipment, tooling and spares around the site. This may involve the use of forklift (training will be provided). Assist with aircraft cleaning. Maintain a clean working environment around the aircraft and facilities. Carry out servicing of aircraft toilets on aircraft in maintenance. Contain any fuel and/or oil spillage. Assist with aircraft manoeuvring requirements. Ensure all waste products are separated and recycled as necessary. Ensure the scissor lifts are on charge at the end of their shift and ensure battery servicing is carried out. Ensure all AAGDS vehicles are clean and tidy and all fluid levels checked. Address and report any safety concerns immediately. Ensure that equipment is maintained in a serviceable, clean, tidy and safe condition, reporting any faulty equipment immediately using the correct channels. Carry out additional team responsibilities or any other reasonable request from your Hangar Foreman, SLE, LE or Hangar Management Team. To recommend to the SLE any improvements that may increase safety and/or efficiency. Carry out any reasonable request to carry out offsite support e.g. AOG, Line. Remain up to date with all Read & Sign notices. Health and Safety Understand individual operational safety and security responsibilities including; Be aware of personal health and safety and the health and safety of others at work. Including Management responsibilities as required by H&S Manual. Be aware of aviation safety responsibilities with regards to the AAGDS Safety Policy. Including Management responsibilities as required by the Safety Management Manual Be aware of aviation security responsibilities with regards to the AAGDS Security Policy. Essential Skills & Qualifications More than 3 years aircraft experience (or in a comparable industry) or recognised aircraft apprenticeship with a minimum of one years aircraft experience plus minimum 12 months service. Hold a Level 3 NVQ Maintenance/Engineering diploma qualification Has had Competency Assessment completed and is at a satisfactory level. Ability to work effectively in a team. Ability to work unsupervised when required to do so. Good awareness of Aviation safety. Good communication skills. Able to operate a powerset (GPU). Additional Information Attractive salary on offer (including shift allowance & annual bonus) Shift pattern: 5 on, 5 off, 4 on, 4 off (Day shifts). 7am - 7pm You must be eligble to live and work in the UK

Are you an experienced Aircraft Technician looking to develop your career supporting the Royal Navy? Do you have hands-on experience working on Merlin or other rotary-wing aircraft? Our client is seeking skilled Aircraft Technicians to join their established aviation engineering team at Royal Navy Air Station Culdrose, one of the UK's busiest and most operationally significant military airfields. This is a fantastic opportunity for candidates transitioning from the Armed Forces or those bringing relevant civilian rotary-wing experience. You'll play a key role in maintaining Merlin helicopters, ensuring aircraft availability, safety, and operational readiness in a highly regulated environment. The Role As an Aircraft Technician, you will: Carry out aircraft maintenance and off-aircraft support activities Work as an Aircraft Engineering Fitter across operational support contracts Ensure all tasks meet safety, quality, and regulatory requirements Identify and escalate risks, quality issues, and customer concerns Complete technical documentation and administrative duties accurately Attend training and development activities to enhance skills and knowledge About You To be considered, you will ideally have: A minimum of 3 years' experience in an airworthiness environment Merlin helicopter experience or strong rotary-wing aircraft background Experience working with Merlin aircraft systems and support equipment Knowledge of Lean Operating Procedures, Naval Air Publications, and CIETP Familiarity with engineering and asset management systems A strong commitment to safety, quality, COSHH, and tool control procedures What's on Offer Competitive salary with annual reviews Up to 6% contributory pension scheme 29 days annual leave plus bank holidays Structured training and development with access to a wide range of courses Funding for qualifications and career progression opportunities Comprehensive wellbeing support, including Employee Assistance Programme Healthcare cash plans and wellbeing resources Employee discounts across a wide range of retailers Supportive and inclusive working environment Please apply now to be considered for this opportunity. Please note that due to high application volumes, the closing date may be brought forward.

MPI are currently recruiting for Aircraft Seat Fitters based at Luton Airport Immedidate start until May/June 2026 DAYS Monday - Friday 07:00 - 17:00 Umbrella £26.03ph (Inside IR35) Duties: Stripping, fitting and repairing aircraft seats on the Boeing aircraft. Candidates must have previous experience in this role in an aircraft environment. Currenty Human Factors, SFAR88 and EWIS training is required. Successful applicants in this role would be required to undergo a reference check for the last 5 years of employment. If the applicant has resided in a country for 6 months or longer within the last 5 years, a Criminal Record Check would be required that Country also. If interested in this role and would like further information, please do not hesitate to contact MPI on (phone number removed) (option 2) and ask for the Aviation Department.

MPI are excited to have a permanent role come in for an experience NDT Level 2 Engineer to be based at our clients site in Warwickshire. Our Client are recruiting for an experienced Level 2 NDT Person , they are based in Warwick and are specialists in Aerospace Gas Turbine Engine repair and supply into Aerospace and support Aircraft Operators around the World. Key Responsibilities Carry out NDT inspections as a certified Level 2 technician in approved Flouroescent Penetrent Inspection (FPI) method within the scope of Part-145 approval. Perform inspections in accordance with approved NDT procedures, OEM manuals (CMM, SRM, AMM), and Part-145 MOE requirements. Set up, verify, and calibrate NDT equipment using approved reference standards and calibration blocks. Interpret and evaluate inspection results against OEM acceptance criteria. Accurately complete inspection records, NDT reports, and electronic MRO documentation systems. Raise findings, discrepancies, and non-conformances in accordance with Part-145 and internal quality procedures. Maintain full traceability of inspections, equipment, consumables, and records. Work in compliance with human factors, FOD control, and aviation safety standards. Support audits (CAA/EASA, customer, internal) as required. Maintain personal certification, vision requirements, and continuation training. Requirements Valid Aerospace Level 2 NDT certification (EN 4179 / NAS 410, PCN Aerospace, ASNT or equivalent accepted by the Part-145 organisation). Minimum of 400 hours relevant NDT experience within the last 12 months, per applicable method, in an aerospace environment. Current near vision and colour vision meeting aerospace NDT requirements. Demonstrable experience working within a Part-145 MRO or equivalent regulated aerospace environment. Strong knowledge of OEM manuals, aerospace standards, and controlled procedures. Ability to work independently within the limits of Level 2 authorisation. Desirable Experience inspecting aircraft structures, engine components, landing gear, or composite assemblies. Familiarity with MOE, Part-145 exposition, and electronic MRO systems. Previous involvement in regulatory or customer audits. Some away from base travel may be required About the company • The Company expects to grow significantly over the next 5 years. We are looking for people who we can develop into our next generation of skilled fitters, Mechanics, inspectors or engineers. You will be working as part of our team supporting operations and your work will consist off but not limited to. • Repair of parts for stud removal • Welding of aircraft components to relevant standard • Repair and modification of tooling and stands. • Must be willing to work away from site when required.

Aircraft Fitter (Mechanical) 6 month contract Based in Shawbury, Shrewsbury Offering 28.16ph Inside IR35 Have you completed an Aviation Apprenticeship or similar? Do you have experience working on Helicopters? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Aircraft Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Provide engineering operational support to Flight Operations Accomplishment of Maintenance inspections and repairs as directed by nominated Shift Supervisor or Certifying Engineer Work to high standards to ensure continued safe operation of the aircraft Completion of maintenance, including airframe structure, power plant, mechanical, and electrical systems in accordance with written instructions laid down by OEM Conduct off-aircraft mechanical, power plant, component, and composite technical work in workshops as required Also required to assist in day to day running of the aircraft Hangar, including aircraft movement and general housekeeping responsibilities Your skillset may include: Apprenticeship in Aircraft Maintenance or related discipline Must have thorough knowledge of engine and airframe systems Knowledge of specialised test equipment relating to engine and airframe systems Knowledge of: Flight/Airport Operations, Aircraft Line Maintenance, Aircraft Base Maintenance Knowledge of UK Military Aviation and UK MFTS Knowledge of CAA Part 145 and Part M regulations Experience of Flight Operations and Line Maintenance If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Aircraft Fitter (Mechanical) 6 month contract Based in Shawbury, Shrewsbury Offering 28.16ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Aircraft Engineering Supervisors (Wildcat) (Mechanical and Avionics) RNAS Yeovilton, Yeovil BA22 8HT Competitive salary plus benefits 38 hours /40 hours or 45 hours per week contracts available/ Monday- Friday Are you looking to develop a career in Aviation supporting the Royal Navy? Do you have hands on Aircraft experience, if so we would love to hear from you. Serco are proud to support the Fleet Air Arm, including the Wildcat Maritime Force (WMF) based at Royal Naval Air Station Yeovilton, delivering services ranging from the repair and maintenance of military aircraft- to fuel delivery and off aircraft support services. Yeovilton is one of the Royal Navy s two principal air stations, is one of the busiest military airfields in the UK and home to more than 100 aircraft. Serco have some exciting opportunities for Aircraft Engineering Supervisors (Any Trade) (Wildcat) to be based at our site at RNAS Yeovilton located in Somerset. This role is responsible for the aircraft management and ground support to our Wildcat aircrafts. Our Aircraft Engineering Supervisors carry out contracted tasks ensuring customer policy and regulations are met to a high standard, whilst ensuring any customer complaints or quality issues and business risks are raised with Team leads. Within this role, our Aircraft Fitters will comply with The Health and Safety at Work (HASAW) Act 1974 and Customer Policy and Regulations. You will be responsible for completing any administration duties required to the role and be willing to attend further training courses to develop your skills and knowledge in the role. We offer this position as either 40 or 45 hours per week, working Monday- Friday, plus an option to undertake shift work, with additional shift pay. What you'll need to do the role: Minimum of 6 years working in an airworthiness environment, relevant experience for the Wildcat aircraft, with a minimum of 2 years hands on experience Hold/have ability to hold Certificate of Competency for Supervisory level Attained formal training in the Wildcat aircraft and associated trade systems. Previous experience and a good working knowledge of the following: Wildcat Aircraft Engineering and Aircraft Systems (by Trade). Wildcat Aircraft Servicing and Support Equipment. Hold a certificate of Competency at Supervisor level An understanding of Lean Operating Procedures. An understanding of Naval Air Publications and Compound - Interactive Electronic Technical Publications (C-IETP). Adhere to Health and Safety, the Control of Substances Hazardous to Health (COSHH) Regulations, Tool Control and Quality Practices. An understanding of Engineering and Asset Management Systems. Completed or able to complete Maintenance Human Factors Course. Understand rotary wing military (aviation) procedures. An understanding of Airworthiness Engineering Safety and Compliance iaw Regulatory and Legislative requirements (MAA). A capability to work productively, efficiently & effectively with initiative and drive under tight timescales and pressure whilst maintaining operational outputs. Ability to achieve SC clearance What we offer: Salary: Competitive salaries with annual reviews Pension: Up to 6% contributory pension scheme Holidays: 28 days' annual leave plus bank holidays Training and development: We offer a wide range of learning opportunities with over 1,100 internal courses available, funding for qualifications and apprenticeships, mentoring opportunities, and a focus on internal progression Wellbeing: 24/7 Employee Assistance Programme, BUPA Anytime HealthLine, wellbeing app, Simplyhealth cash plans to claim back money towards healthcare costs, 30% off at Serco-managed leisure centres Discounts: Save across around 1,000 retailers, from food and clothing to days out, entertainment and travel ShareSave scheme: Helps you save regularly with the choice to buy Serco shares at a discount at the end of your savings period Employee networks: Dedicated networks where colleagues can come together to find support, share challenges, discuss ideas, network and be part of a community Charity: You can also choose to donate to your favourite charity tax-free, through our Payroll Giving Scheme. To discover more about our careers in Defence, meet our team, and to find out more about what we offer, please follow this Link . We're also a signatory of the UK Governments Women in Defence Charter, to find out more please click here . Please click on the apply button to complete your application. Occasionally we receive a large volume of applications for our roles and when that happens, we sometimes bring the closing date forward, so please apply promptly to avoid disappointment. At Serco, we see people first and foremost for their performance and potential. We are committed to building a diverse and inclusive organisation that supports the needs of all. As such we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working. As a proud Disability Confident Leader and holder of the Gold Inclusive Employer Standard, disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.

Job Title: Skilled Fitter Location: Hamble, Southampton Flexible Opportunities: Fully onsite Rate: £35.66/hour (Umbrella - Inside IR35) Working hours: Early shift: 7am-5pm (flexible to 6am-4pm), approx. 50 hrs/week with potential overtime on Fridays and weekends, subject to supervisor approval and rest requirements. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're working with a major name in Aerospace seeking Skilled Structural Fitters to support military aircraft production. If you have a solid background in structural assembly and heavy build work, this is a great opportunity to join a high-performing team. What will I be doing? As a skilled Fitter, you'll be hands-on with structural sub-assemblies, jigs, and components-bringing precision and pace to every job. Key Responsibilities: Stripping, repairing, and assembling complex aircraft structures and components Drilling, riveting (solid/percussion), and fitting skins on metallic assemblies Working from engineering drawings, tech documents, and route cards Using hand and power tools to complete builds to tight tolerances Maintaining your AO stamp and signing off your own work Supporting production targets and mentoring junior operators as needed Maintaining high standards in quality, safety, cost, and housekeeping What do I need to succeed? You're reliable, quality-focused, and used to delivering in fast-paced, production-driven environments. You'll need to be comfortable working on your feet and taking ownership of your work from start to finish. Essential: Recent experience in aircraft production (not just maintenance) Strong structural fitting skills including jig work, drilling, and riveting Ability to interpret technical drawings and route cards NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual work on the shop floor Additional skills (preferred but not essential): Experience with composite and metallic structures Familiar with lean practices such as 5S and continuous improvement Own a complete personal toolkit (a strong sign of experience - although site tools are provided) What's my next step? If this sounds like the role for you, we'd love to hear from you. Click apply to share your details and join a team that's building something exceptional.

Job Title: Skilled Fitter Location: Southampton Shifts: 2 Earlies / 3 Lates (Weekly Rotation) Rates & Hours: Earlies: £22.23 PAYE / £30.56 Umbrella 06:00-14:15 (Mon-Thu), 06:00-12:00 (Fri) Lates: £25.94 PAYE / £35.66 Umbrella 14:15-22:30 (Mon-Thu), 12:00-18:00 (Fri) Contract: Ongoing - Long-Term Opportunity Due to the nature of the work, BPSS clearance is required. Only UK nationals or eligible applicants will be considered. Failure to obtain or maintain clearance may impact employment. Who We Are & What's on Offer We're looking for experienced Skilled Fitters - Falseworks to join a high-performance aerospace team, working on the A350 programme. You'll be part of the crew assembling and repairing high-precision structures using falsework-think jigs, cradles and custom frameworks designed to align large components like fuselage sections, wings or tanks during build. This is precision work with real impact. If you're methodical, hands-on, and serious about aerospace, this is your next step. What You'll Be Doing As a Skilled Fitter - Falsework Assembly, you'll operate as part of a skilled manufacturing team, reporting to the Flow Leader and collaborating with Engineering, Quality, and Planning to ensure all targets are hit safely, on time and to spec. Your day-to-day will include: Structural Assembly & Precision Work Experienced in stripping, repairing, and assembling aircraft structures with precision hand-fitting, drilling, and fastening to tight tolerances. Technical Interpretation & Documentation Skilled in reading engineering drawings, repair schemes, and completing work route cards ensuring full traceability. Surface Treatment & Systems Installation Proficient in applying seals, coatings, and assembling aircraft pipework to industry standards. Testing & Quality Assurance Competent in performing alignment, pressure, and electrical bonding tests while strictly adhering to safety, quality, and lean processes. What You'll Need to Succeed You'll be a hands-on engineer with strong technical know-how, a problem-solving mindset and the drive to deliver high-quality work every shift. Essential: Qualifications & Experience: NVQ Level 3 (or equivalent) in Engineering/Manufacturing or time-served apprenticeship with significant aerospace assembly experience (metallic/composite). Technical Skills: Strong understanding of technical drawings, engineering documentation, and confident computer use for documentation. Work Ethic & Practices: Excellent hand skills, attention to detail, able to work independently or in teams, and familiar with 5S, lean principles, and safe workshop practices. Desirable: Current expertise in aerospace fitting skills with strong manual handling awareness. Positive, can-do attitude and a strong work ethic suited for a physically active role. Why Apply? Join a leading aerospace programme where your skills matter. Apply now, take ownership, thrive under pressure, and help shape the future of flight.

2 x Earlies / 3 x Lates Earlies: 22.23 PAYE or 30.56 UMB - 06:00-14:15 (Mon-Thu) / 06:00-12:00 (Fri) Lates: 25.94 PAYE or 35.66 UMB - 14:15-22:30 (Mon-Thu) / 12:00-18:00 (Fri) Role Summary Working as part of an established team within the A350 department. This role is skilled and will undertake to strip, repair and assemble aircraft components and sub-assemblies. As a Skilled Operator, your role has an increased level of self-management, empowerment and a disciplined outlook to your everyday working. Skilled status also carries the responsibility for problem solving, team working and a will to succeed with the business. Essential Responsibilities EHS - Promote a safe workplace environment without risk to health and minimising the impact to the environment. Ensure that all Environmental, Health and Safety policies, procedures, rules and regulations are adhered to and that all accidents and incidents are reported Clocking and Booking - Ensure that all required clockings (time and attendance) and bookings (job costings) are made in an accurate and timely manner Housekeeping - Ensure that workstations are kept clean and maintained, with all tools and equipment stored correctly. Uphold a clear desk policy Quality - Ensure that all Quality standards, processes and procedures are complied with. All work is completed with care and attention minimising wastage Cost Management - Support cost reduction and management initiatives through reducing unnecessary expenditure Knowledge & Skills - Keep knowledge and training up to date for necessary operations to the best of your knowledge and belief to achieve specification and acceptable standards for your role. For example, Approved Operator (AO) stamp(s) to be kept up to date Team Working - Must actively participate in team meetings and be prepared to share knowledge, coach and mentor trainees when required, be willing to be trained in other areas Any other reasonable duties that fall in line with the level of the role Role Specific Duties Will include but is not limited to: Reporting directly to the section Flow Leader, participate within a team and work with functional specialists (such as engineering, Quality, etc) to ensure production requirements are achieved safely, on time and to the customer specifications Read and follow work instructions, specifications and part drawings (accessed via PC) Read and interpret engineering data, technical drawings, specifications, repair schemes, Manufacturing Procedures (MPs) and other approved maintenance data Accurately complete work route cards to maintain component traceability Measuring and marking out of materials to carry out close tolerance hand fitting processes Precision drilling, countersink, reaming and finishing of holes in aircraft structure assemblies Application of assembly techniques including riveting, mechanical fasteners and other bonding processes Sealing and jointing techniques for environmental protection and painting, alocrome of aircraft structures Application of bush and bearing installation Application of part mark on aircraft assemblies/sub-assemblies Assembly of pipework for various types of aircraft Alignment, pressure, electrical bonding testing and functional testing Preferred Candidate Requirements NVQ Level 3 or equivalent in Engineering or Manufacturing, or Time-served apprenticeship in allied trades Numeracy, literacy and IT skills, and able to read and understand technical documentation, including via computer/IT equipment Good planning and problem- solving skills Working understanding of the 5 S and lean principles Strong work ethic supported by a real positive attitude to succeed Excellent communication skills Demonstrate the currency and competency of the key skill codes required within department Great attention to the detail and accuracy of the task requirement Proven ability to actively participate in a team culture. To be able to work with minimal supervision Shift working required There are certain aspects of this role that require mechanical / manual lifting of parts so some lifting will be required and applicants must be capable of undertaking activities with appropriate assistance if required. Desirable Qualifications / Experience Previous experience of manufacture of complex metallic and composite structures Security Clearance Baseline Personnel Security Standard (BPSS) clearance is required and must be maintained for this role. Please note that in the event that BPSS clearance cannot be obtained, you may not be eligible for the role and/or any offer of employment may be withdrawn on grounds of national security.

Shape the future of aviation by crafting wings for the world's most advanced commercial aircraft at Airbus Broughton. You must already have a full Aerospace or Engineering Apprenticeship qualification to apply. Join Guidant as we collaborate with the world's largest aircraft manufacturer, Airbus. We are in the search for skilled Aircraft Fitters to join Airbus' dynamic team, based at the prestigious Broughton site, you'll be situated within the Wing Build Production section. If you have experience in a similar manufacturing or engineering role, you are invited to join us at Airbus. At Airbus Broughton, you'll play an integral role in assembling wings for the entire family of Airbus commercial aircraft, including the renowned A320 and A330 families, as well as the cutting-edge A350XWB (extra wide body) planes. What to expect as a Skilled Aircraft Fitter: Embark on essential and challenging work, as aircraft wings are among the most technically intricate components of an aircraft. The wings define the aircraft's aerodynamic performance and play a crucial role in delivering eco-efficient solutions. In this role you'll also: Engage in assembly, general fittings, and component installations. Conduct repairs on metallic and composite materials. Occasionally work in confined spaces or at heights Flexible shift options: Double Days: Week 1 - 06:00 to 13:10, Week 2 - 13:30 to 20:40 (Monday to Friday) Nights: 20:45 to 06:00 (Monday to Thursday) To be considered, we are looking for: Completed Aerospace or Engineering Full Apprenticeship Previous experience in similar roles such as Sheet Metal Workers, Metal Fabricators, Welders, or Mechanical Fitters Other qualifications we accept: Indenture and City & Guilds Level 2, BTEC ONC or Modern Apprenticeship Certificate, NVQ Level 2, 3, Key Skills Level 2, and City & Guilds Level 2/BTEC ONC in a recognised engineering field. Self-motivation with excellent communication skills. Ability to work independently or as part of a team. Openness to continuous improvement processes and innovative approaches Knowledge and adherence to high Health and Safety standards Working at Airbus Broughton: Airbus Broughton boasts a rich aeronautical legacy, having produced aviation classics like the Vickers Wellington, Lancaster, De Havilland Comet, and Mosquito aircraft. Become a part of Airbus' continued legacy. Reach out to our team to learn more: Work Location: In person

Shape the future of aviation by crafting wings for the world's most advanced commercial aircraft at Airbus' prestigious Broughton facility. You must already have a full Aerospace or Engineering Apprenticeship qualification to apply. Join Guidant as we collaborate with the world's largest aircraft manufacturer, Airbus. We are in the search for skilled Aircraft Fitters to join Airbus' dynamic team, based at the prestigious Broughton site, you'll be situated within the Wing Build Production section. If you have experience in a similar manufacturing or engineering role, you are invited to join us at Airbus. At Airbus Broughton, you'll play an integral role in assembling wings for the entire family of Airbus commercial aircraft, including the renowned A320 and A330 families, as well as the cutting-edge A350XWB (extra wide body) planes. What to expect as a Skilled Aircraft Fitter: Embark on essential and challenging work, as aircraft wings are among the most technically intricate components of an aircraft. The wings define the aircraft's aerodynamic performance and play a crucial role in delivering eco-efficient solutions. In this role you'll also: Engage in assembly, general fittings, and component installations. Conduct repairs on metallic and composite materials. Occasionally work in confined spaces or at heights. Flexible shift options: Double Days: Week 1 - 06:00 to 13:10, Week 2 - 13:30 to 20:40 (Monday to Friday). Nights: 20:45 to 06:00 (Monday to Thursday). To be considered, we are looking for: Completed Aerospace or Engineering Full Apprenticeship. Previous experience in similar roles such as Sheet Metal Workers, Metal Fabricators, Welders, or Mechanical Fitters. Other qualifications we accept: Indenture and City & Guilds Level 2, BTEC ONC or Modern Apprenticeship Certificate, NVQ Level 2, 3, Key Skills Level 2, and City & Guilds Level 2/BTEC ONC in a recognised engineering field. Self-motivation with excellent communication skills. Ability to work independently or as part of a team. Openness to continuous improvement processes and innovative approaches. Knowledge and adherence to high Health and Safety standards. Working at Airbus Broughton: Airbus Broughton boasts a rich aeronautical legacy, having produced aviation classics like the Vickers Wellington, Lancaster, De Havilland Comet, and Mosquito aircraft. Become a part of Airbus' continued legacy. Reach out to our team to learn more. Work Location: In person

Service Engineer Aylesbury Monday-Friday 8am-5pm (Early finish Friday) 35,000 DOE Training provided Overtime (1.5x) Early finish Friday Company van and fuel card (available for personal use) 25 days annual leave + holiday purchase scheme Death in service Life assurance Health cashback plan Shares in business Refer a friend scheme The Service Engineer Role We are seeking a Service Engineer to join a leading multinational blue-chip company. This role is based on-site at a customer's manufacturing facility and involves inspection, repair, and preventative maintenance of compressors, blowers, and pumping systems fitted to vehicles. Full training will be provided. Key Responsibilities for the Service Engineer role Inspect, repair, and service equipment in line with manufacturer specifications and company standards. Complete all required documentation, including reports, inspections, calibration checks, and job sheets. Undertake mechanical maintenance, testing, and repair of hydraulic and pneumatic systems, pumps, compressors, motors, and ancillary equipment. Read and interpret schematic drawings. Provide breakdown assistance Carry out additional tasks including onboard vehicle smart system maintenance, vessel integrity checks, light body repairs, and general vehicle repairs. Ideal Backgrounds for our service engineer We are particularly keen to hear from candidates with experience in: HGV Fitter / HGV Technician Plant Fitter Hydraulic Fitter Vehicle Technician Aircraft Engineer Mechanical Fitter Compressor Engineer Water treatment or pump engineering Key Skills & Knowledge Diagnostic analysis, repairs, and preventative maintenance. Knowledge of hydraulics and pneumatics. Hands-on mechanical and electrical fault-finding experience. If you are interested in this Service Engineer role, please apply now or contact Grace at E3 Recruitment

Job Title: Skilled Fitter Location: Hamble, Southampton Flexible Opportunities: Fully onsite Rate: £35.66/hour (Umbrella - Inside IR35) Working hours: Early shift: 7am-5pm (flexible to 6am-4pm), approx. 50 hrs/week with potential overtime on Fridays and weekends, subject to supervisor approval and rest requirements. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're working with a major name in Aerospace seeking Skilled Structural Fitters to support military aircraft production. If you have a solid background in structural assembly and heavy build work, this is a great opportunity to join a high-performing team. What will I be doing? As a skilled Fitter, you'll be hands-on with structural sub-assemblies, jigs, and components-bringing precision and pace to every job. Key Responsibilities: Stripping, repairing, and assembling complex aircraft structures and components Drilling, riveting (solid/percussion), and fitting skins on metallic assemblies Working from engineering drawings, tech documents, and route cards Using hand and power tools to complete builds to tight tolerances Maintaining your AO stamp and signing off your own work Supporting production targets and mentoring junior operators as needed Maintaining high standards in quality, safety, cost, and housekeeping What do I need to succeed? You're reliable, quality-focused, and used to delivering in fast-paced, production-driven environments. You'll need to be comfortable working on your feet and taking ownership of your work from start to finish. Essential: Recent experience in aircraft production (not just maintenance) Strong structural fitting skills including jig work, drilling, and riveting Ability to interpret technical drawings and route cards NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual work on the shop floor Additional skills (preferred but not essential): Experience with composite and metallic structures Familiar with lean practices such as 5S and continuous improvement Own a complete personal toolkit (a strong sign of experience - although site tools are provided) What's my next step? If this sounds like the role for you, we'd love to hear from you. Click apply to share your details and join a team that's building something exceptional.

Mechanical Calibration Technician (Airtools) is required for a permanent role for an established global company in the Salmesbury, BB2 area. Competitive salary (DoE) + superb benefits (see below). The Calibration Technician will be working 40 hours (M-F Days) + occasional O/T, applicants must hold a full UK driving licence as they will be required to work in the field and occasionally stay away from home. This is a fantastic opportunity with long-term security, excellent career prospects and training provided for a candidate wishing to develop a career in mechanical calibration. The client will also consider Ex-Forces, and candidates who have may have part completed or recently completed a quality, calibration, electrical or mechanical apprenticeship. This position may also suit a candidate with an interest in mechanics or calibration and with some experience of air tools, torque and or dimensional measuring equipment. Benefits: Competitive salary (DoE) + 26 days hols + B/hols 40 hours per week, 8am 4:30pm + occasional O/T, particularly when working away from home. Company vehicle (after training period), laptop & mobile. In-house and external training provided. Excellent company pension & life assurance schemes. Salary sacrificed heath care scheme and Company sick pay after qualifying period. Perkbox The successful Calibration Technician day to day duties will include: Calibrate and test pneumatic / air tools to traceable standards in lab and at Customers sites within given timeframes. Identify solutions to customer problems and communicate them effectively, such solutions to include but not be limited to advice on calibration cycles, test points and equipment usage. Ensure that customer reports are completed professionally and clearly articulate the outcome and recommendations of any visit. Documenting and inputting data / results onto computer software and producing calibration certs. Ensure that all stock, equipment & tools are kept clean safe, secure and maintained to high level. To undertake and attend training courses necessary to develop and maintain competence to undertake the role. To observe and comply with all Company policies including but not limited to H&S, Car Policy, Expenses, Ethics Policy, IT User policy and all policies and appendices within the Contract of Employment. Flexibility to work approved O/T and work away from home with overnight stays if required. To be suitable for this Calibration Technician role you must have the following experience / skills / characteristics: Experience of using and testing pneumatic and torque tools - Avdel / Cherrymax Bottle, Huck Puller / Swager, nut runner, pin gun, pulse / rivet gun, torque screwdriver, torque wrench etc. To have a basic understanding of the calibration process and laboratory quality systems. 5 GCSE qualifications at grades A-C, or equivalent PC literate in MS Word and Excel. Hardworking, keen to learn, pursue self-development and provide a quality service to customers. Good interpersonal communication skills (verbal & written). Able to work as part of a team or alone with the minimum of supervision. Full UK driving licence (essential, preferably clean) The ideal Calibration Technician will have majority of the following experience / skills / characteristics: Recent experience of calibrating torque and or air tools to in-house, or traceable standards. Relevant mechanical / metrology engineering qualification i.e. HNC, NVQ / BTEC / C&G L3 etc. Time served or completed a relevant mechanical engineering apprenticeship. Mechanical maintenance / mechanical fitting experience. Experience of calibrating mechanical, physical or dimensional equipment. Knowledge of importing / exporting from Excel databases and report generation from databases and calibration software such as Indysoft (desirable) or MetCAL, InGAGE, ProCal, SureCal etc. Previous experience of working in the calibration, aerospace, automotive or manufacturing sectors Key words : Calibration Technician, Calibration, Air Tools, Torque, Airtools, Pneumatic, Aircraft Fitter, Mechanical Assembly, Mechanical Fitting, Car Mechanic, Vehicle Technician, Field Service, Mechanical, Physical, Dimensional, Repair, Maintenance, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable, Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Inspection, AS 9100, QA, QC, Test and Verification, Test & Measurement, Quality, Aerospace, Automotive, Ex HM Forces, Travel, Full Time, Permanent, Blackburn, Salmesbury, Preston, Lancashire The successful Calibration Technician (Pneumatic / Airtools & Torque) will need to be methodical, numerate, organised, possess good communication skills, PC literate (Outlook, Word & Excel). and flexible as you will be required to work at other sites with overnight stays, work overtime and other duties not mentioned in this job description. You will have the relevant qualifications or experience, be trustworthy, punctual, conscientious, keen and have a practical approach to work. If you are interested in Calibration Technician role and have majority of the required experience, please click the apply now button.

Morson Talent are recruiting for Skilled Aircraft Fitters to work for our prestigious client in Filton Bristol. Candidate needs to have experience of using hand tools and previous work experience in a fitter/assembly operator role Candidates must be comfortable working at heights and within confined spaces Candidates must pass pre-employment medical before going on site as well as BPSS clearance Candidates assembling A400M Must have completed an apprenticeship within an engineering discipline i.e: sheet metal worker, aircraft or maintenance technician, tool maker, fitter/turner Must hold NVQ L2 + L3 or equivalent in engineering. Start from mid-October 12 months rolling contract with possibility of permanent role. 35 hours a week Monday-Thursday 6:30am-3:45pm PAY RATE: £26.92 per hour Umbrella £20.13 per hour PAYE Overtime: 25% uplift Mon-Fri and 50% Sat-Sun Skilled Apprenticeship in engineering discipline NVQ L.2 + 3 in engineering discipline Completed a work based or time served apprenticeship

Morson Are recruting for Aircraft Fitters on behalf of our prestigious client, based at RAF Brize Norton. The company provides MAA Part 145 Aircraft support to the RAF A400M (Atlas) fleet. Morson have an exceptional opportunity for a highly motivated career focused andambitious Aircraft Fitter seeking a role in a challenging, fast-paced and rewardingenvironment. Our aim as a team is to attract and develop key talent across all levelsof our growing aviation business.Duties and responsibilities are, but not limited to the following: General Responsibility As an Aircraft Fitter you will be responsible for Maintenance, Repairs andModifications to the aircraft. Your responsibilities will include, but are not limited to: -? Compliance with the organisational policies and procedures detailed inthe supporting manuals? Identifying and rectifying existing and potential unsafe conditions? Maintaining the work environment in a clean and safe manner using a clean as you go approach? Complying with company Safety Management System (SMS) occurrencereporting procedures? Complying with the safety policy? Complete aircraft paperwork to a high standard? An awareness of COSHH, Working at height and Manual handling safetyrequirements? Actively embrace a Continuous Improvement (CI) culture Essential Job Function ? Responsible for the maintenance of the aircraft and safe use of groundequipment? Can accurately navigate and interpret aircraft maintenancedocumentation.? Carry out aircraft modifications and light structural work if required. Candidate Essential Requirements ? Must hold a valid aircraft standards-based qualification(Apprenticeship/NVQ level 3) or aircraft related academicqualification/traineeship with a minimum 3 years recorded experience orbe able to satisfy the Training / Maintenance management team.? Current Human factor initial and refresher, EWIS and SFAR 88 certificate? Knowledge of aeronautical regulations? Must have the right to live and work in the United Kingdom? Fluency in English, both written and verbal? Be able to obtain full SC security clearance Desirable Criteria ? Experience on A400M, Propeller or Wide body Aircraft? Previous exposure to and Amos? Knowledge of Military Aviation Authority (MAA) MRP Part 145 regulations? Have good communication skills, both verbally and written, andinterpersonal skills? A proven ability to work as part of a team? Be able to work on their own initiative and demonstrate leadership skills? Possess proficient organisational skills and an ability to work in an efficientmanner? IPAF/MEWP familiarisation Typical Working ConditionsHours: 5x5x4 shift approx. 40 hours per week with potential overtime - 07.00 to 19.00 PPE is provide and its use is mandatory in the performance ofyour work. Salary Pay: £30 ph umbrella and £23.24 PAYE Duration: 6 month rolling contract (long term) Company Values ? Agile - We will question the norm, seek out opportunity and embracechange for the better.? Ambitious - We will dream big and pursue those dreams with passion anddetermination.? Committed to Excellence - We will always strive to be better, to bedifferent, to Go Beyond.? Customer Centric - We will build honest, personal relationships with ourcustomers and aim to wow them.? Fun - We ll have fun while getting the job done and ensure a positive andhappy workplace.? People Focused - We will develop, engage, protect and support our staffand each other.? Trust - We will create trust by being honest, ethical and respectful everyday. What we say is what we do.

Job Title: Skilled Fitter Location: Hamble, Southampton Flexible Opportunities: Fully onsite Rate: £35.66/hour (Umbrella - Inside IR35) Working hours: Early shift: 7am-5pm (flexible to 6am-4pm), approx. 50 hrs/week with potential overtime on Fridays and weekends, subject to supervisor approval and rest requirements. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're working with a major name in Aerospace seeking Skilled Structural Fitters to support military aircraft production. If you have a solid background in structural assembly and heavy build work, this is a great opportunity to join a high-performing team. What will I be doing? As a skilled Fitter, you'll be hands-on with structural sub-assemblies, jigs, and components-bringing precision and pace to every job. Key Responsibilities: Stripping, repairing, and assembling complex aircraft structures and components Drilling, riveting (solid/percussion), and fitting skins on metallic assemblies Working from engineering drawings, tech documents, and route cards Using hand and power tools to complete builds to tight tolerances Maintaining your AO stamp and signing off your own work Supporting production targets and mentoring junior operators as needed Maintaining high standards in quality, safety, cost, and housekeeping What do I need to succeed? You're reliable, quality-focused, and used to delivering in fast-paced, production-driven environments. You'll need to be comfortable working on your feet and taking ownership of your work from start to finish. Essential: Recent experience in aircraft production (not just maintenance) Strong structural fitting skills including jig work, drilling, and riveting Ability to interpret technical drawings and route cards NVQ Level 3 in Engineering/Manufacturing or time-served apprenticeship Physically capable of manual work on the shop floor Additional skills (preferred but not essential): Experience with composite and metallic structures Familiar with lean practices such as 5S and continuous improvement Own a complete personal toolkit (a strong sign of experience - although site tools are provided) What's my next step? If this sounds like the role for you, we'd love to hear from you. Click apply to share your details and join a team that's building something exceptional.

Aircraft Fitter 12 Month Contract Based in the Bristol Area Offering 26.92ph Inside IR35 Shift pattern of 6:30am-3:45pm Monday-Thursday Do you hold an engineering apprenticeship? Do you hold an NVQ/SVQ Level 3 or equivalent? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Aircraft Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Working from engineering instructions and understanding Aircraft Drawings General tasks include the use of power tools for drilling, shimming, and sealing 1st party certification will be required following successful completion of the relevant courses You may need to work in a confined space (tank work), which includes restricted and physically demanding wing access and egress through oval-shaped manholes Your skillset may include: Aerospace or Engineering Full Apprenticeship An ability to work alone or as part of a team An openness to continuous improvement processes and new ways of working Knowledge and a high regard for Health and Safety standards Fitting experience If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Aircraft Fitter 12 Month Contract Based in the Bristol Area Offering 26.92ph Inside IR35 Shift pattern of 6:30am-3:45pm Monday-Thursday Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.