1858 jobs found

Rubicon Consulting is currently recruiting for Lead Secondary Engineer (P+C) on a 6 Month Contract, based in Glasgow/ Hybrid Role Summary The Lead Secondary Engineer (P+C) will lead and work in a skilled team on a wide range of SSEN & SPEN substation projects. The position will focus on the project and tender engineering and its interfaces and scope of work involved in HV to meet customer needs, legislative demands and standards. Overall responsible for managing & leading all secondary engineering activities from project start till the As-Built stage with strict adherence to Project Specifications & our standards including QA/QC, HSSE & Integrity. Instruct, supervise & coordinate with other engineering team within the company (local & remote), internal & external partners, sub-suppliers, secondary engineers & civil engineers. Review of P&C design packages as per NG/ET/SR188 Input to the development of the DID Submitting completed Design Packages for Design Compliance Audit Ensuring all design changes are managed in accordance with the design change management process Attending Design Review meetings (DRMs) and Hazard review meetings (HRMs) as required Review and certify the design packages and issue the DCAAR Lead Secondary design responsibilities including but not limited to SLD, protection and control schemes, interfacing of P&C with new and existing plant and equipment, panel general arrangements, AC & DC distribution systems, battery and battery chargers sizing, voltage drop, cable sizing, signal lists, setting calculation, cable block diagrams, multicore & fiber optic cable schedules, and cables core sheets, SCADA/SCIS architecture development and review of designs. etc. Coordinate with suppliers and reviewing their deliverables. Check remote end requirements and provide input to supplier. Specialised in Substation protection and control system and its architecture Participate in technical discussions with customers and suppliers, handle site queries and take necessary actions up to as-built documentation Lead technical responsibilities for procurement of equipment and subcontractors, including development of project specific technical specifications and accompanying documentation, technical review of quotes and lead technical discussion with regards to scope of works and technical requirements. Secondary engineering budget, schedule, forecast, risk & change management activities. Secondary engineer of large and complex EHV/HV Air & Gas Insulated Substation (AIS & GIS) projects in UK. Requirements Bachelor or master s in electrical engineering or equivalent Extensive years of substation engineering experience in utilities, particularly transmission electrical network design. Proven experience with both greenfield and brownfield type projects. Knowledge of required SSEN & SPEN requirements and standards. Chartered Engineer (CEng) status or working towards it Result orientated team player with a proactive approach. Excellent in communication, to interact with external and internal parties at all levels in a multi-cultural environment. Expert knowledge in Substation secondary design engineering, AC & DC system calculation, compilation of signal list, setting calculation, interface engineering and preparing cable schedules Strong in MS Office, knowledge in MicroStation and AutoCAD is required. Fluency in English both written and spoken Our Company Rubicon Consulting is a Talent management consultancy which helps you to optimise business performance and competitive advantage by choosing the right people first time!

CNC Turner and Machinist Permanent £30,800 + Two Bonuses + Early Friday Finish (1pm) Must have Setting and Turning experience Introduction We are currently recruiting for an experienced CNC Machinist. Setter and manual turner to join a well-established engineering business on a permanent basis. This is an excellent opportunity offering a competitive salary, bonus structure, early Friday finish, and an excellent benefits package. Reporting to the Shift Supervisor, you will be responsible for setting and operating CNC turning machines, ensuring quality, accuracy, and safety at all times. The Role You will manage Computer Numeric Controlled (CNC) turning equipment from set-up through to operation, including routine safety checks such as E-stops and other safety devices. The role requires flexibility to operate multiple machines as needed while maintaining high production and quality standards. Key Duties Produce parts from information contained in job cards. Read and interpret technical drawings, including tool cutting points and TNR compensation. Read and edit CNC programmes where required. Select and set the correct tools for each job. Check seal dimensions using mechanical and optical measuring equipment, ensuring tolerance compliance. Carry out batch inspections at defined intervals in line with SOP. Inspect parts for defects and dispose of non-conforming parts. Set and operate multiple CNC machines as required. Run first-off components, check against drawings, and make adjustments where necessary. Enter job start/end details via barcode scanning for traceability. Reinstate and maintain work areas before commencing the next job. Requirements Previous experience with CNC turning (essential). Knowledge of Fanuc operating systems or Okuma machines (desirable). Experience within an engineering production environment. Ability to read and interpret manufacturing drawings and produce components accordingly. Flexible and able to move between machines, products, and work areas. Strong organisational and time management skills. Ability to prioritise workload effectively. Methodical approach with good housekeeping standards. High awareness of health and safety, including appropriate use of PPE. Hours Rotating shift pattern: Week 1: 6am - 2pm. Week 2: 2pm - 10pm. Early finish on Fridays. What We Offer £30,800 per annum. Two bonus schemes. Early Friday finish. Excellent benefits package. Permanent, stable employment. Interested? Apply now with your CV to be considered for this CNC Setter and Turner opportunity. Acorn by Synergie acts as an employment agency for permanent recruitment.

Calibration Technician / Engineer People Solutions are currently recruiting for a Calibration Technician / Engineer to join our forward-thinking client based in Birmingham. This is a fantastic opportunity, offering great benefits and genuine opportunities for growth and progression. Shifts: Monday - Friday: 8am - 5pm Salary: £30,000 - £38,000 per annum, depending on experience Benefits include: Your benefits as Calibration Technician / Engineer will be: Monday to Friday working pattern Stable, long-term opportunity Supportive and specialist working environment Opportunity to develop technical skills Day-to-day duties: As a Calibration Technician / Engineer , your duties will include (but not be limited to) calibrating a range of precision measuring equipment working with: Parallel screw plug gauges Ring gauges Tapered screw plug gauges Dial test indicators (DTI) Bevel protractors Universal Length Measuring (ULM) equipment Floating carriage systems DTI calibrators Rotary tables Essential skills: The skills required to be a Calibration Technician / Engineer are: Previous experience within calibration, metrology, or a similar precision engineering environment Strong understanding of measurement equipment and calibration processes Ability to work to tight tolerances and high levels of accuracy Excellent attention to detail and problem-solving skills Ability to work independently and manage workload effectively Desirable Skills: Experience working with ULM, DTI calibrators, or similar specialist equipment Experience within a quality-controlled or accredited environment Training: Full training will be provided, with additional support throughout. Contact: If you are ready to take on this exciting opportunity, apply today by clicking the link below or contact our recruitment team to find out more. People Solutions do not charge candidates any fees or request deposits at any stage of the recruitment process

SeniorElectronicsHardware Design Engineer £up to 80kBase+Benefits SouthEastRef:ABJ6489 Onsite: Perm An experienced Senior Electronics Hardware Design Engineer is required to join a highly regarded engineering R&D team developing advanced hydraulic and control systems for large machinery click apply for full job details

World Class Defence Organisation is currently looking to recruit 3x C++ Application Software Engineer subcontractors on an initial 12 month contract. This role requires: Strong experience in C++ application development. A strong background in software engineering, its realisation and system wide impact. Experience in CI/CD pipelines, GitLab, Docker. Experience of developing software for virtual environments. Rate: £65.00 per hour Location: Bristol Hybrid / Remote working: The role will likely be onsite - a compressed 4 day week (Monday to Thursday is fine). There may be some scope for hybrid working (project dependent). Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at 'time and a quarter' Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Interview Process: One stage Video Interview Application Software Engineer Job Description: The team is implementing a demonstration system for a complex new Command and Control application, which extends existing concepts and logic. If the demonstration is successful, it may develop into a project for a fully operational capability. We're looking for an engineer who enjoys turning system needs into working software, working closely with domain specialists, and delivering capabilities in short timescales. Responsibilities: Application development and testing, including sophisticated business logic.Collaborating with internal algorithm teams to integrate algorithms, implement complex transformation logic, test and verify. Implementing and integrating interfaces with other subsystems and external simulators.Building and extending components within an existing software application framework and deploying into a virtualised test environment. Skill and experience required: Experience in developing application-level software (C++, C#, Java or similar). Familiarity with CI/CD pipelines and modern software engineering practices.Knowledge of Data Distribution Service (DDS) is advantageous. Defence industry experience is advantageous.

Our clientOur client is a well-established provider of specialist engineering services, based in the North West, supplying advanced industrial equipment and technical support to customers across aerospace, automotive, energy and wider manufacturing sectors.Operating from their Manchester service centre, they support customers across the whole of the UK. Their reputation is built on technical excellence, reliability and strong customer relationships.They are now looking to appoint a professional, motivated Service Engineer who enjoys autonomy, variety and solving problems on customer sites.The opportunityThis is a field-based Service Engineer position supporting customers with the installation, servicing, testing and repair of specialist industrial machinery. You will work closely with the senior engineer in the team, gaining structured on-the-job training and product knowledge, including bespoke processes that will be fully taught. Key aspects of the role include: UK-wide field service with regular overnight stays Installation, set-up and mechanical/electrical preparation of machinery Routine servicing, planned testing work and machine health checks Fault-finding and diagnostics on electro-mechanical and PLC-controlled systems (diagnostics only) Supporting commissioning alongside overseas technical specialists Building strong relationships with customers and representing the business professionally Attending the Manchester workshop when not on customer sites for training, preparation and development This role suits someone who enjoys being out on the road, solving technical problems, working with precision equipment and delivering high-quality service to manufacturing customers.About youYou will be an experienced, capable engineer with the confidence to work independently on customer sites once trained. You will also enjoy contributing to a small, friendly team and maintaining strong, professional communication with both colleagues and customers. You will bring: Experience in a field-based service or maintenance role Electrical engineering skills Ability to carry out installations, cabling, mechanical adjustments and diagnostics Experience with industrial or electro-mechanical machinery Confidence using PLC interfaces for diagnostics (no programming required) A recognised engineering apprenticeship, HNC or equivalent experience A full UK driving licence Willingness to travel nationwide and stay away regularly The ability to work well with others, adapt to changing schedules and take pride in delivering exceptional customer service You will also live within commuting distance of Manchester , as you will attend the service centre weekly for training and workshop tasks.If you are a skilled engineer looking for a varied, hands-on role with genuine support, training and long-term stability, we would love to hear from you. Apply now or get in touch for a confidential conversation.

About Security Services Group Security Services Group (SSG) is part of GUARDIAN, within Army Standing Joint Command, providing in-house specialist advice, design and maintenance across Government where high-assurance security is required. We design, install and maintain the advanced systems that protect Defence and Government sites across the UK and overseas. With around 325 specialists, SSG delivers consultancy, design, project management, installation and through-life maintenance of electronic and physical security systems. Our operational teams work 24/7 to maintain the systems protecting Defence and Government assets at home and abroad. Role description and requirements We are looking for motivated and passionate professionals to join as a Security Technician in the SSG s Eastern Team, delivering essential security services that keep Defence operations running safely and securely. You ll be tasked from home, travelling to sites across your region to maintain and install security systems. Most of your work will be field-based, with occasional travel across the UK and opportunities to travel overseas. The role is responsible for delivering high-quality technical support and customer service, ensuring maintenance, installation, and minor works are completed efficiently and in compliance with health and safety standards. The position requires strong technical knowledge, problem-solving skills, and the ability to manage customer relationships effectively. Full system training is provided, so if you have a background in electrical, electronic or security engineering, we ll help you build the specialist knowledge you need. Person specification Essential Skills, Experience, Qualifications, Memberships & Licences A recognised, relevant Engineering background, Engineering Apprenticeship and / or Engineering qualification, i.e. Intruder Detection Systems, Perimeter Intruder Detection Systems, CCTV Systems and Access control Systems. Full UK Driving Licence (maximum of 6 points). Desirable Skills, Experience, Qualifications, Memberships & Licences HNC in Electrical or Electronic Engineering or equivalent NVQ/SVQ Level 3 in Electronic Security Systems (IDS, VSS, etc) or equivalent ONC/OND in Electronic Security Systems (IDS, VSS, etc) or equivalent Security Engineer, Security Technician, Security Installer.

Job Title: Build Engineer Location: Hemel Hempstead, UK (On-site) Salary: £35,000 (depending on experience) Employment Type: Full-time Role Overview We are seeking a skilled and detail-oriented Build Engineer to join our growing technical team in London. You will be responsible for designing, maintaining, and optimising build systems and CI/CD pipelines, ensuring efficient and reliable software delivery across projects. Key Responsibilities Develop, implement, and maintain build and deployment pipelines Manage and improve CI/CD processes (e.g., Jenkins, GitHub Actions, GitLab CI) Troubleshoot and resolve build and integration issues Collaborate with developers, QA, and DevOps teams to streamline workflows Automate repetitive tasks to improve efficiency and reduce errors Maintain build infrastructure and ensure system scalability Monitor build performance and implement improvements Ensure code quality through integration of testing and validation tools Document build processes, tools, and configurations Required Skills & Experience Proven experience as a Build Engineer, DevOps Engineer, or similar role Strong knowledge of CI/CD tools (e.g., Jenkins, Bamboo, TeamCity) Experience with version control systems (Git preferred) Proficiency in scripting languages (e.g., Bash, Python, or PowerShell) Familiarity with containerisation tools (Docker, Kubernetes) Understanding of software development lifecycle (SDLC) Experience with cloud platforms (AWS, Azure, or GCP) Strong problem-solving and debugging skills Desirable Skills Experience with infrastructure as code (e.g., Terraform, CloudFormation) Knowledge of configuration management tools (e.g., Ansible, Puppet, Chef) Exposure to microservices architecture Understanding of security best practices in build and deployment Qualifications Bachelor's degree in Computer Science, Engineering, or related field (or equivalent experience) Important Competencies to have! Excellent attention to detail Strong communication and collaboration skills Ability to work in a fast-paced, agile environment Proactive and solution-oriented mindset What We Offer Company benefits package Opportunities for professional growth and development Collaborative and innovative work environment

Site Engineer (Commissioning / BMS Integration) About the Role We are seeking a skilled Site Engineer / Commissioning Engineer to support the delivery and integration of advanced energy monitoring and data acquisition systems across commercial and residential buildings. This role involves commissioning and integrating specialist hardware and software with building systems, ensuring accurate data capture and reliable communication to monitoring and billing platforms. It's ideal for an engineer with experience in BMS, metering, or controls integration who enjoys hands-on problem solving, working on-site, and collaborating with remote technical teams. Key Responsibilities Commission and configure energy monitoring and data logging systems on-site Integrate solutions with Building Management Systems (BMS) Configure and test communication protocols including M-Bus, Modbus, BACnet Integrate utility meters (heat, electricity, water, gas) into monitoring platforms Verify accuracy of data collection and transmission Diagnose and resolve communication and integration issues Work closely with project managers, technical teams, and subcontractors Produce commissioning reports and site documentation Provide remote support, troubleshooting, and system optimisation Skills & Experience Essential Experience working with BMS or building controls systems Knowledge of metering systems and data logging Familiarity with communication protocols (Modbus, M-Bus, BACnet) Strong fault-finding and problem-solving ability Basic networking knowledge (IP addressing, routers, switches) Full UK driving licence Willingness to travel to sites across the UK Desirable Experience with energy monitoring or billing platforms Background in electrical or controls engineering Experience commissioning building energy systems

Quality Engineer - High-Integrity / Regulated Manufacturing Location: Abingdon Salary: £60,000 + Training + Progression + Flexitime + Early Friday Finish Are you a Quality Engineer who thrives in complex, regulated environments?Do you enjoy owning NPI, APQP and "right-first-time" delivery from concept through to production? This is a great opportunity to join a highly technical engineering business supplying critical products into safety-led, high-integrity industries. You'll play a key role in ensuring new and existing products meet the highest quality, compliance and traceability standards, while working closely with engineering, manufacturing, suppliers and customers. The Role You'll be the quality lead within project teams, supporting New Product Introduction and driving robust quality planning from day one. The focus is on prevention, not firefighting, ensuring products are compliant, traceable and delivered right first time.Key responsibilities include: Leading APQP and NPI activities from feasibility through to volume production Owning PPAP submissions and ensuring manufacturing readiness Managing non-conformances , root cause analysis and corrective actions Leading internal, external and supplier audits , including special processes Ensuring full traceability, lifetime records and material certification Supporting process validation, control plans and capability studies Acting as a key interface between engineering, manufacturing, suppliers and customers What They're Looking For Quality Engineer within a regulated or high-integrity manufacturing environment Strong working knowledge of APQP, PPAP, FMEA, SPC, MSA and Root Cause Analysis Experience supporting NPI and transition from prototype to production Confident dealing with audits, suppliers and customers Able to read engineering drawings and understand manufacturing processes Background in nuclear, defence, aerospace, pressure equipment or similar environments is highly desirable Interested in a confidential conversation? Commutable from: Oxford, Didcot, Radley, Wantage, Grove, Witney, Wallingford, Milton, Sutton Courtenay, Wootton, Marcham, Drayton, Steventon, East Hagbourne, South Moreton, Clifton Hampden, Dorchester-on-Thames, Kennington, Botley, Swindon, Banbury Key words: Nuclear, Regulated Engineering, Supplier Quality, Customer, Special Processes, Welding, NDT, Audit Management, Audits, Launch Readiness Review, Run at Rate, Process Capability, Cp Cpk, Control Plans, Manufacturing Readiness, Engineering Compliance, Quality Assurance Engineer, Quality Systems, ISO 9001, ISO 14001, ISO 45001, ASME, Pressure Equipment, Counterfeit Fraudulent Suspect Items, CFSI, Lifetime Records, Material Certification, BS EN 10204, Continuous Improvement, Lean Manufacturing, Kaizen, Right First Time

PLC Controls Engineer £50,000-£55,000 + Overtime, Benefits and Training Rochdale Monday - Friday 37 hours An Excellent opportunity has arisen for a controls engineer to join a well-established special purpose machinery manufacturer in a varied role, working on a range of technical projects. The company have a great reputation and through growth and the securing of new long term projects, they require a controls engineer to join their established controls and automation team. This role offers the opportunity to have a heavy involvement in hands-on projects, as well as technical office based work and occasional onsite commission. You will be responsible for software development on a range of PLC systems including Siemens, Allen Bradley and Mitsubishi and will receive further training and support within a well-established and experienced automation department. This role would suit a controls engineer or a strong electrical PLC engineer looking to develop into a specialist software automation specialist, working for a leading special purpose machine manufacturer offering training, development and a chance to boost your earnings through overtime. The Role: Controls Engineer Working for an established manufacturing company Training, career progression and overtime available Software design and development Monday - Friday office based with occasional offsite commissioning The Candidate: 2+ years' experience in a controls/automation/software role Electrical Background Strong understanding of PLCs Dairis Sprudzans - REF - 4919 Controls Engineer, PLC, Automation, Software, Engineering, Manufacturing, Siemens, Allen Bradley, HMI, Scada, Omron, Mitsubishi, Food, FMCG, Kaisen, Six Sigma, Oldham, Rochdale, Oldham, Manchester, Burnley, Lancashire, Machinery, Manufacturing, SPM, Special Purpose

BMS Service Engineer - London / Home Counties Our client requires a BMS Service Engineer to support their service delivery function, the experienced engineer will be proficient with any BMS Controls systems within commercial premises such as blue chip buildings, Government centres, Banks etc. They are looking for a BMS Service Engineer who is experienced with writing or modifying software however there will be manufacturer training available . In addition to the software skills our client would like the successful BMS Service Engineer to be competent with graphics, there would be an element of training on this particular skill set if needed. As the BMS Service Engineer you will have a strong electrical background and a good understanding of HVAC plant. Industry related training which should include BMS courses as a minimum would be beneficial for this role. I would be interested to hear from any BMS Engineer with either Trend, Tridium, Cylon, Siemens, Schneider, controls experience

Junior Applications Engineer (Robotics / Metrology) £30,000 - £35,000 + Travel + Enhanced Holidays + Sales Training + Career Progression + Company Benefits Bristol Are you a graduate looking to join an innovative technology business where you can combine commercial impact with hands-on engineering involvement in a metrology-driven manufacturing environment? On offer is the opportunity to join a forward-thinking business in a customer-facing engineering consultant role, acting as the technical and commercial link between the company and its clients. This company is a growing technology organisation operating within industrial automation, metrology, and advanced manufacturing, supporting customers across sectors such as Automotive, Aerospace, and Energy. They deliver technically complex solutions designed to improve positional accuracy, process control, and production efficiency in demanding industrial Robotics environments. This role would suit a motivated Graduate who will work closely with engineering teams providing metrology-based solutions, travelling across the UK, building long-term customer relationships, and contributing directly to business growth. The Role: Act as the technical and commercial liaison between the company and customers Present and demonstrate automation and metrology-based solutions to prospective and existing clients Travel across the UK to visit customers and support product demonstrations Work closely with internal engineering teams to understand customer requirements and develop tailored technical and metrology-driven solutions Support new product development and testing from an office and workshop setting Support in programming robotic systems for clients The Person: Experience in an industrial automation setting or similar, programming robotic systems Degree in metrology, industrial automation, robotics, or advanced manufacturing preferred Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH23838c We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Senior Electronics Engineer Location: Bromsgrove Competitive Salary Overview: We are currently recruiting for a Senior Electronics Engineer to work for our client to play a pivotal role in our growing R&D team. This is more than just a design role, it's an opportunity to take real ownership of cutting-edge technology that directly impacts water quality, environmental monitoring, and sustainability. Our sensors combine advanced electronics and intelligent software to deliver highly accurate, low-noise measurements in real-world environments. You'll be at the heart of this innovation, driving design excellence from concept through to manufacture. If you're passionate about electronics, enjoy solving complex challenges, and want your work to make a tangible difference, we'd like to hear from you. Duties & Responsibilities: Lead electronics design and development Design, develop, and test high-performance electronic systems for advanced sensor technology Translate product requirements into robust technical specifications Deliver optimised PCB designs using Altium Designer Drive quality, standards and process improvement Own electronics templates and component libraries, ensuring consistency and ISO9001 compliance Lead and enhance the electronic design review process Ensure designs are reliable, manufacturable, and scalable Test, validate and refine Debug, test, and validate hardware to achieve best-in-class performance Work hands-on with lab equipment to ensure product reliability Support rapid prototyping, including PCB rework and modification Collaborate and influence Act as the technical interface with manufacturing partners from prototype to production Work closely with firmware and mechanical engineers to deliver fully integrated solutions Mentor and support junior engineers, helping to grow team capability Experience and Background Requirements: HND (or equivalent) in Electronics Engineering, Embedded Systems, or similar Proven experience owning electronic designs within a multidisciplinary R&D environment Strong background in analogue and digital design Experience across the full product lifecycle (concept to manufacture) Experience with high-sensitivity sensors (desirable) Technical expertise Advanced experience with Altium Designer (schematics, PCB layout, libraries) Embedded firmware development (C/C++) and microcontrollers Familiarity with communication protocols and version control systems Strong hands-on debugging and validation skills Confident with soldering and PCB rework Personal strengths Confident leading design and specification reviews Strong stakeholder management and communication skills A collaborative mindset with the ability to work across disciplines Passion for mentoring and developing others Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Our client requires an additional BMS Project/Commissioning Engineer, the experienced engineer will be proficient with Trend or Tridium systems within commercial and Government premises also blue chip buildings, schools, shopping centres etc. They are looking for a BMS Project/Commissioning Engineer who is Trend or Tridium biased, experience with writing and modifying software would be essential. In addition to the software skills our client would like the successful BMS Project/Commissioning Engineer to be competent with graphics, there would be ongoing training on these particular skill sets if needed. As the BMS Project/Commissioning Engineer you will have a strong electrical background and a good understanding of HVAC plant. Industry related training which should include Trend or Tridium courses as a minimum would be beneficial for this role

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. Own, document and train others on manufacturing process and standards. Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. Assess compliance and adhere to safety/quality standards. Providing technical support for production and production control. Developing, optimising and implementing factory floor layouts/production cells. Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. Hands-on production support experience in assembly, testing, and quality control. Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

Our client, based in Yarnton, is the world leader in motion capture technology, developing high-performance software and hardware products for the entertainment, engineering and life science industries. Due to continued growth, they are now looking for an experienced Lead Production Technician to join their team. Reporting directly to the Production Manager, the Lead Production Technician within the Production Department leads the production build process by performing assembly, testing, kitting, and diagnosing mechanical faults in electromechanical products, while coordinating the build crew and managing the progression of manufacturing orders. Please note this role is fully on-site, so candidates must be able to commute to Yarnton. Main Duties & Responsibilities: Supervising a team of Electro-Mechanical Assemblers, assigning and delegating tasks, and ensuring the team meets its goals Liaising with the Planner to convert the build plan to Manufacturing Orders Actively participating in the following disciplines, balancing hands-on work with supervisory duties to ensure deadlines are met: Assemble electro-mechanical assemblies with reference to assembly drawings, assembly instructions, and bills of materials. Performing with the Programming, set-up and testing of built units (including any necessary optical alignment cameras) Diagnosing mechanical faults in camera sub-assemblies to component level and managing the repair/replacement Kitting/Supervising the kitting of Manufacturing Orders to the shop floor (including transacting stock via NetSuite) Liaising with the test engineers with reference to the progression of Manufacturing Orders through to completion Assisting the Stock Controller (including assisting with stock take and stock organisation/location) Liaising with the Production Manager/Planner and test engineers, reference RMAs and the progression of RMA returns through repair or to stock Assist with the ongoing improvement of the current product by actively feeding back observations from the current build Assist in the risk prevention/design improvement process by actively feeding back observations from the prototype/current build. To participate in training activities for flexible working To work using correct documentation To participate in Quality Control, Waste Minimisation or other improvement activities Previous Experience/Qualifications: To have experience in the leadership of teams of people To have experience in the use of ERP Systems (i.e. NS) Self-motivated and able to work on own initiative. Meticulous with a good eye for detail. Organised and tidy. Exhibit good written and verbal communication and problem-solving skills. Additional Information: Please note this is a full-time, permanent role working Monday to Friday, on-site 10% Company Pension 25 days Annual Leave + Bank Holidays Life Cover Private Medical with Optical / Dental Insurance Permanent Health Insurance

BMS Improver This is a fantastic chance to enter the world of BMS, There is on offer lots of manufacturing training on control systems i.e Trend, Tridium, Distech, Siemens. This company is looking to develop strong electrical/mechanical engineers who have a good understanding of I.T and make them into competent BMS Service Engineers you will have a strong electrical background and a good understanding of HVAC plant. With Industry related training which should include an electrical qualification as a minimum. This is a Earn while you Learn role the company will utilise you current skillset whilst you are training, once you been trained you will be fully supported by a team of seasoned BMS Engineers who will improve your development. This comes with a competitive salary and company vehicle

About Security Services Group Security Services Group (SSG) is part of GUARDIAN, within Army Standing Joint Command, providing in-house specialist advice, design and maintenance across Government where high-assurance security is required. We design, install and maintain the advanced systems that protect Defence and Government sites across the UK and overseas. With around 325 specialists, SSG delivers consultancy, design, project management, installation and through-life maintenance of electronic and physical security systems. Our operational teams work 24/7 to maintain the systems protecting Defence and Government assets at home and abroad. Role description and requirements We are looking for motivated and passionate professionals to join as a Security Technician in either SSG s Aldermaston or Shrivenham Teams, delivering essential security services that keep Defence operations running safely and securely. You ll be tasked from home, travelling to sites across your region to maintain and install security systems. Most of your work will be field-based, with occasional travel across the UK and opportunities to travel overseas. The role is responsible for delivering high-quality technical support and customer service, ensuring maintenance, installation, and minor works are completed efficiently and in compliance with health and safety standards. The position requires strong technical knowledge, problem-solving skills, and the ability to manage customer relationships effectively. Full system training is provided, so if you have a background in electrical, electronic or security engineering, we ll help you build the specialist knowledge you need. Roles based at Aldermaston will attract the £4,000 Market Skills Allowance (MSA). Person specification Essential Skills, Experience, Qualifications, Memberships & Licences A recognised, relevant Engineering background, Engineering Apprenticeship and / or Engineering qualification, i.e. Intruder Detection Systems, Perimeter Intruder Detection Systems, CCTV Systems and Access control Systems. Full UK Driving Licence (maximum of 6 points). Desirable Skills, Experience, Qualifications, Memberships & Licences HNC in Electrical or Electronic Engineering or equivalent NVQ/SVQ Level 3 in Electronic Security Systems (IDS, VSS, etc) or equivalent ONC/OND in Electronic Security Systems (IDS, VSS, etc) or equivalent Security Engineer, Security Technician, Security Installer.