MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
Dec 08, 2025
Full time
MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Dec 07, 2025
Full time
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Job Description Product Support Engineer - Rail Location: London Full time Job Description As the Product Support Engineer for Rail and you will report to the Site Team Leader or Site Supervisor At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The Product Support Engineer will conduct and support, routine maintenance and repairs on mtu rail products to the standard specified in the approved manuals in accordance with the requirements of the contract(s). To embrace digitalisation. What you will be doing: Perform preventative, scheduled maintenance and/or corrective maintenance activities in accordance with the maintenance schedule, manuals and contract. Actively participate in the ongoing continuous improvement activities for both maintenance and procedures. General new suggestions for improvement. To conduct planned maintenance tasks in accordance with the operating instructions. Attend and participate in meetings with the customer where necessary to obtain sign off for work that has been carried out on the customers equipment. Undertake fault finding and repair when required using appropriate technical information (e.g. Technical drawings and fault finding guides). Completion of relevant documentation for all work carried out in order to accurately record activities that are recorded for the company and the customer. Proactive involvement in the Company's HSQE management processes. Maintain cleanliness of the SGB onsite facilities. Attend local and factory training courses when necessary to ensure skills remain current. Any other related activities reasonably required e.g. to cover work in another depot. Accurately report parts used during service work as per internal processes to ensure our stock is effectively controlled and accounted for. Make effective use of IT systems such as Go!Care, C4S, eWeb, Go!Manage, Go, Diasys, Outlook etc Position Qualifications From an engineering background NVQ Level 2 in Engineering or Equivalent Outstanding safety awareness Proficient in MS Office, particularly XLS, Word and email. On the job training will be provided for SAP, MTU Business Portal Preferred requirements: Proactive and with good initiative Strong Organising skills and a flexible attitude Works well with others Power Systems is the Rolls-Royce business which provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalisation and electrification, we strive to develop drive and power generation solutions that provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility. We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These technologically advanced solutions serve our customers in the marine and infrastructure sectors worldwide. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Type of Contract PermanentPandoLogic.
Dec 07, 2025
Full time
Job Description Product Support Engineer - Rail Location: London Full time Job Description As the Product Support Engineer for Rail and you will report to the Site Team Leader or Site Supervisor At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The Product Support Engineer will conduct and support, routine maintenance and repairs on mtu rail products to the standard specified in the approved manuals in accordance with the requirements of the contract(s). To embrace digitalisation. What you will be doing: Perform preventative, scheduled maintenance and/or corrective maintenance activities in accordance with the maintenance schedule, manuals and contract. Actively participate in the ongoing continuous improvement activities for both maintenance and procedures. General new suggestions for improvement. To conduct planned maintenance tasks in accordance with the operating instructions. Attend and participate in meetings with the customer where necessary to obtain sign off for work that has been carried out on the customers equipment. Undertake fault finding and repair when required using appropriate technical information (e.g. Technical drawings and fault finding guides). Completion of relevant documentation for all work carried out in order to accurately record activities that are recorded for the company and the customer. Proactive involvement in the Company's HSQE management processes. Maintain cleanliness of the SGB onsite facilities. Attend local and factory training courses when necessary to ensure skills remain current. Any other related activities reasonably required e.g. to cover work in another depot. Accurately report parts used during service work as per internal processes to ensure our stock is effectively controlled and accounted for. Make effective use of IT systems such as Go!Care, C4S, eWeb, Go!Manage, Go, Diasys, Outlook etc Position Qualifications From an engineering background NVQ Level 2 in Engineering or Equivalent Outstanding safety awareness Proficient in MS Office, particularly XLS, Word and email. On the job training will be provided for SAP, MTU Business Portal Preferred requirements: Proactive and with good initiative Strong Organising skills and a flexible attitude Works well with others Power Systems is the Rolls-Royce business which provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalisation and electrification, we strive to develop drive and power generation solutions that provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility. We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These technologically advanced solutions serve our customers in the marine and infrastructure sectors worldwide. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Type of Contract PermanentPandoLogic.
Job Description Product Support Engineer - Rail Location: Winsford Full time on-site Job Description As the Product Support Engineer for Rail and you will report to the Site Team Leader or Site Supervisor At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The Product Support Engineer will conduct and support, routine maintenance and repairs on mtu rail products to the standard specified in the approved manuals in accordance with the requirements of the contract(s). To embrace digitalisation. What you will be doing: Perform preventative, scheduled maintenance and/or corrective maintenance activities in accordance with the maintenance schedule, manuals and contract. Actively participate in the ongoing continuous improvement activities for both maintenance and procedures. General new suggestions for improvement. To conduct planned maintenance tasks in accordance with the operating instructions. Attend and participate in meetings with the customer where necessary to obtain sign off for work that has been carried out on the customers equipment. Completion of relevant documentation for all work carried out in order to accurately record activities that are recorded for the company and the customer. Proactive involvement in the Company's HSQE management processes. Maintain cleanliness of the SGB onsite facilities. Attend local and factory training courses when necessary to ensure skills remain current. To participate in 24/7 shift working including callout when required. Work as a mobile engineer if required, van will be provided. Any other related activities reasonably required e.g. to cover work in another depot. Accurately report parts used during service work as per internal processes to ensure our stock is effectively controlled and accounted for. Make effective use of IT systems such as Go!Care, C4S, eWeb, Go!Manage, Go, Diasys, Outlook etc Travel will be required for training and product familiarisation Position Qualifications From an engineering background NVQ Level 2 in Engineering or Equivalent Outstanding safety awareness Proficient in MS Office, particularly XLS, Word and email. On the job training will be provided for SAP, MTU Business Portal Preferred requirements: Must be a competent writer of business letters, emails and detailed technical reports. Proactive and with good initiative Strong Organising skills and a flexible attitude Works well with others Power Systems is the Rolls-Royce business which provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalisation and electrification, we strive to develop drive and power generation solutions that provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility. We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These technologically advanced solutions serve our customers in the marine and infrastructure sectors worldwide. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Type of Contract PermanentPandoLogic.
Dec 07, 2025
Full time
Job Description Product Support Engineer - Rail Location: Winsford Full time on-site Job Description As the Product Support Engineer for Rail and you will report to the Site Team Leader or Site Supervisor At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere. By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture. The Product Support Engineer will conduct and support, routine maintenance and repairs on mtu rail products to the standard specified in the approved manuals in accordance with the requirements of the contract(s). To embrace digitalisation. What you will be doing: Perform preventative, scheduled maintenance and/or corrective maintenance activities in accordance with the maintenance schedule, manuals and contract. Actively participate in the ongoing continuous improvement activities for both maintenance and procedures. General new suggestions for improvement. To conduct planned maintenance tasks in accordance with the operating instructions. Attend and participate in meetings with the customer where necessary to obtain sign off for work that has been carried out on the customers equipment. Completion of relevant documentation for all work carried out in order to accurately record activities that are recorded for the company and the customer. Proactive involvement in the Company's HSQE management processes. Maintain cleanliness of the SGB onsite facilities. Attend local and factory training courses when necessary to ensure skills remain current. To participate in 24/7 shift working including callout when required. Work as a mobile engineer if required, van will be provided. Any other related activities reasonably required e.g. to cover work in another depot. Accurately report parts used during service work as per internal processes to ensure our stock is effectively controlled and accounted for. Make effective use of IT systems such as Go!Care, C4S, eWeb, Go!Manage, Go, Diasys, Outlook etc Travel will be required for training and product familiarisation Position Qualifications From an engineering background NVQ Level 2 in Engineering or Equivalent Outstanding safety awareness Proficient in MS Office, particularly XLS, Word and email. On the job training will be provided for SAP, MTU Business Portal Preferred requirements: Must be a competent writer of business letters, emails and detailed technical reports. Proactive and with good initiative Strong Organising skills and a flexible attitude Works well with others Power Systems is the Rolls-Royce business which provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalisation and electrification, we strive to develop drive and power generation solutions that provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility. We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These technologically advanced solutions serve our customers in the marine and infrastructure sectors worldwide. Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too. Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive. Type of Contract PermanentPandoLogic.
44,000 starting, Overtime paid at 150%, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits, Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs. This role will be covering the Midlands area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etc If you have experience as an Heavy Goods Engineer , PSV Technician/Bus Mechanic , or Heavy Plant Fitter , we would be very keen to speak with you. Key Responsibilities of the HGV Technician Carry out diagnostic analysis, repairs and preventative maintenance. Deliver customer-facing product support with a professional approach. Complete PDI inspections to ensure vehicles meet required standards. Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies. Complete all required paperwork accurately - including engineer reports, inspections, calibration checks and job sheets. Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment. Experience & Requirements for our HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools. Direct HGV Technician experience Hands-on experience working with HGVs and specialist vehicles. Competent with mechanical, hydraulic, pneumatic and electrical systems. Full UK Driving Licence City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous If you are interested in this Mobile HGV Technician role, please apply now or contact Grace at E3 Recruitment
Dec 07, 2025
Full time
44,000 starting, Overtime paid at 150%, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits, Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs. This role will be covering the Midlands area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etc If you have experience as an Heavy Goods Engineer , PSV Technician/Bus Mechanic , or Heavy Plant Fitter , we would be very keen to speak with you. Key Responsibilities of the HGV Technician Carry out diagnostic analysis, repairs and preventative maintenance. Deliver customer-facing product support with a professional approach. Complete PDI inspections to ensure vehicles meet required standards. Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies. Complete all required paperwork accurately - including engineer reports, inspections, calibration checks and job sheets. Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment. Experience & Requirements for our HGV Technician Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools. Direct HGV Technician experience Hands-on experience working with HGVs and specialist vehicles. Competent with mechanical, hydraulic, pneumatic and electrical systems. Full UK Driving Licence City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous If you are interested in this Mobile HGV Technician role, please apply now or contact Grace at E3 Recruitment
We are currently recruiting an Operations Support Officer to work at our depot in Warrington. Reporting to the Location Service Manager you will be responsible for the daily co-ordination of the engineering function, dealing with Goods in and stores maintenance. Allocation of Engineering jobs to aid the team whilst maintaining an organised level of engineering administration click apply for full job details
Dec 07, 2025
Contractor
We are currently recruiting an Operations Support Officer to work at our depot in Warrington. Reporting to the Location Service Manager you will be responsible for the daily co-ordination of the engineering function, dealing with Goods in and stores maintenance. Allocation of Engineering jobs to aid the team whilst maintaining an organised level of engineering administration click apply for full job details
Job Description Sysco are currently recruiting for a Services Engineer to join the Newhouse Technology team reporting to the Services Engineer Manager. As the Services Engineer it is your responsibility to provide both onsite and remote 2nd line technical support of end user technology throughout Sysco GB. Promoting excellent customer service, dealing with colleagues in a professional, friendly and helpful manner. This role is working on site in our Newhouse, Scotland depot, and is covering Inverness and Dundee, so you must be based in Scotland, and a good degree of flexibility is required for travel to these depots when needed. Key Accountabilities and Responsibilities: Provide both onsite and remote 2nd line support for end-users Ability to prioritise workload to ensure service levels are maintained. Management and closure of incidents and service requests via the helpdesk ticketing system, owning through to resolution. Proactive replacement of end of life assets, including the asset disposal or recycling of the old device. Provide IT Induction for new starters, ensuring they have the hardware and software required to perform in their role. Administration of mobile devices via an MDM platform and SIM card connections Maintain accurate asset inventory of IT hardware, including but not limited to Laptops, Desktops, Printers, Networking hardware including switches, routers and access points, mobile phones, tablet devices, UPS and Comms Room Air Conditioning Ensure that changes are made in accordance to change management guidelines and policies. Providing support to projects as required to support the deployment of new technologies. About you: The successful candidate will have a good working knowledge of maintaining IT security, infrastructure, and service standards as well as a technical knowledge of Microsoft product base including client Operating Systems (Windows 10 and 11) Teams, Office 365 and Azure. You will have experience of administering MDM platforms such as Endpoint Manager (Intune) an understanding of networking (Wireless, LAN and WAN). You must have excellent interpersonal skills and be customer service focused with a keen attention to detail which is essential in maintaining accurate inventory data and documentation. You should have experience of supporting networked printers and proven troubleshooting skills for hardware and application support as well as active Directory / Azure AD understanding and administration experience. It is highly advantageous that the successful candidate has an ITIL V3/ V4 foundation certificate and experience of service delivery frameworks. What we offer: A competitive salary Pension scheme Generous holiday allowance of 25 days, with option to purchase additional holidays + bank holidays. Huge discounts on all sorts of lovely food and award-winning products through our staff shop Discounts on Cinema tickets, shopping and earn cashback on purchases through Sodexo. Recognition awards and Incentives Real career opportunities - being part of Sysco, the world's leading foodservice business, opens a world of possibility.
Dec 07, 2025
Full time
Job Description Sysco are currently recruiting for a Services Engineer to join the Newhouse Technology team reporting to the Services Engineer Manager. As the Services Engineer it is your responsibility to provide both onsite and remote 2nd line technical support of end user technology throughout Sysco GB. Promoting excellent customer service, dealing with colleagues in a professional, friendly and helpful manner. This role is working on site in our Newhouse, Scotland depot, and is covering Inverness and Dundee, so you must be based in Scotland, and a good degree of flexibility is required for travel to these depots when needed. Key Accountabilities and Responsibilities: Provide both onsite and remote 2nd line support for end-users Ability to prioritise workload to ensure service levels are maintained. Management and closure of incidents and service requests via the helpdesk ticketing system, owning through to resolution. Proactive replacement of end of life assets, including the asset disposal or recycling of the old device. Provide IT Induction for new starters, ensuring they have the hardware and software required to perform in their role. Administration of mobile devices via an MDM platform and SIM card connections Maintain accurate asset inventory of IT hardware, including but not limited to Laptops, Desktops, Printers, Networking hardware including switches, routers and access points, mobile phones, tablet devices, UPS and Comms Room Air Conditioning Ensure that changes are made in accordance to change management guidelines and policies. Providing support to projects as required to support the deployment of new technologies. About you: The successful candidate will have a good working knowledge of maintaining IT security, infrastructure, and service standards as well as a technical knowledge of Microsoft product base including client Operating Systems (Windows 10 and 11) Teams, Office 365 and Azure. You will have experience of administering MDM platforms such as Endpoint Manager (Intune) an understanding of networking (Wireless, LAN and WAN). You must have excellent interpersonal skills and be customer service focused with a keen attention to detail which is essential in maintaining accurate inventory data and documentation. You should have experience of supporting networked printers and proven troubleshooting skills for hardware and application support as well as active Directory / Azure AD understanding and administration experience. It is highly advantageous that the successful candidate has an ITIL V3/ V4 foundation certificate and experience of service delivery frameworks. What we offer: A competitive salary Pension scheme Generous holiday allowance of 25 days, with option to purchase additional holidays + bank holidays. Huge discounts on all sorts of lovely food and award-winning products through our staff shop Discounts on Cinema tickets, shopping and earn cashback on purchases through Sodexo. Recognition awards and Incentives Real career opportunities - being part of Sysco, the world's leading foodservice business, opens a world of possibility.
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Dec 06, 2025
Full time
Commercial Gas Engineer (with Electrical Qualifications) Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Commercial Gas Engineer Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Dec 06, 2025
Full time
Commercial Gas Engineer Regional Coverage up to 50k basic DOE + door to door My client is looking to recruit a Commercial Gas Engineer The primary contract will regional coverage of Commercial clients such as banks, offices, schools, bus depots. The ideal candidate will hold current Commercial Tickets along with a full Driving license. The main Duties will include: Gas Appliance Servicing Installation and replacement of mechanical Plant and equipment Service and repair of Boilers. Service and repair of Gas Fire and overhead radiant heating services and Gas Fired water heaters. Essential Qualifications: Driving License CCN1 - Core domestic national gas safety CEN1 - Domestic central heating boilers COCN1 - Core commercial national gas safety CODNCO1 - Core domestic to core commercial. ICPN1 - First fix pipe installation TPCP1A - Test and purge CENWAT - Boilers and water heating appliances CIGA1 - Indirect-fired heating appliances. CDGA1 - Direct-fired heating appliance. Benefits: Up to 50k basic DOE + Door to door Company Pension 20 days holiday plus Bank Holidays Overtime paid a time and a third Hotels provided (if required) and compensation/allowance for evening meals. For more information, please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Workshop Service Manager Are you an experienced Service Manager looking to join a market leader in hire? Do you enjoy supporting colleagues and helping get the best out of them? We're looking for a Workshop Service Manager to join the Nationwide Platforms team. You'd look after a team of engineers, with full responsibility for the depot click apply for full job details
Dec 06, 2025
Full time
Workshop Service Manager Are you an experienced Service Manager looking to join a market leader in hire? Do you enjoy supporting colleagues and helping get the best out of them? We're looking for a Workshop Service Manager to join the Nationwide Platforms team. You'd look after a team of engineers, with full responsibility for the depot click apply for full job details
A leading provider of hire equipment is seeking a field-based Mobile Plant Engineer to maintain, service, and repair heavy plant equipment based out of a depot in Bristol for a long standing company with high job security. The role will primarily focus on telehandlers and roto telehandlers, with some experience in other heavy plant desirable click apply for full job details
Dec 06, 2025
Full time
A leading provider of hire equipment is seeking a field-based Mobile Plant Engineer to maintain, service, and repair heavy plant equipment based out of a depot in Bristol for a long standing company with high job security. The role will primarily focus on telehandlers and roto telehandlers, with some experience in other heavy plant desirable click apply for full job details
Electrical Maintenance Engineer North East £37,000 - £39,000 + Package The Role We're seeking an experienced and motivated Electrical Maintenance Engineer to join a leading building services provider, supporting a major transport contract across the North East region. This is a mobile role covering a range of sites including offices, depots, stations, and sidings. You'll be responsible for both pla
Dec 06, 2025
Full time
Electrical Maintenance Engineer North East £37,000 - £39,000 + Package The Role We're seeking an experienced and motivated Electrical Maintenance Engineer to join a leading building services provider, supporting a major transport contract across the North East region. This is a mobile role covering a range of sites including offices, depots, stations, and sidings. You'll be responsible for both pla
PSV/HGV Technician Location: Bristol Salary:£44,000-£47,000 We are working for our client to find a HGV or PSV technician depot and we'll takeyour engineering skills to the next level. If you're ready to embark on an exciting journey in vehicle maintenance and make a meaningful impact in our community, apply today with your updated CV click apply for full job details
Dec 06, 2025
Full time
PSV/HGV Technician Location: Bristol Salary:£44,000-£47,000 We are working for our client to find a HGV or PSV technician depot and we'll takeyour engineering skills to the next level. If you're ready to embark on an exciting journey in vehicle maintenance and make a meaningful impact in our community, apply today with your updated CV click apply for full job details
An excellent opportunity for a Logistics Administration Assistant to join a well-established Truck Manufacturing company! Job Type: Part-Time - Temporary 3-6 Month Contract, may lead to a Permanent Position. Salary: £13.00 Per Hour. Location: Stourbridge DY9. Schedule: Tuesday- Thursday 8.00am -4pm - Holidays will be pro-rota. About The Company: They don't just build vehicle bodies-they engineer them to withstand the demands of commercial transport. Their team of skilled engineers and craftsmen ensure that every unit meets the highest standards of safety, durability, and functionality. The company is now looking to recruit a Logistics Administration Assistant to assist in the Vehicle Movements Department. Duties Include but not limited to: Responsible for maintaining spreadsheets and filing of records. Compiling Job packs and relevant paperwork for individual Jobs (Truck builds) Helping with collections and deliveries (Trucks) Create status reports for key customers Liaise with colleagues and attend meetings of production plans Driving licence is required as visits to the local Truck storage depot may be required All tasks to be authorised by the Vehicle Movement Co-ordinator. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Dec 06, 2025
Seasonal
An excellent opportunity for a Logistics Administration Assistant to join a well-established Truck Manufacturing company! Job Type: Part-Time - Temporary 3-6 Month Contract, may lead to a Permanent Position. Salary: £13.00 Per Hour. Location: Stourbridge DY9. Schedule: Tuesday- Thursday 8.00am -4pm - Holidays will be pro-rota. About The Company: They don't just build vehicle bodies-they engineer them to withstand the demands of commercial transport. Their team of skilled engineers and craftsmen ensure that every unit meets the highest standards of safety, durability, and functionality. The company is now looking to recruit a Logistics Administration Assistant to assist in the Vehicle Movements Department. Duties Include but not limited to: Responsible for maintaining spreadsheets and filing of records. Compiling Job packs and relevant paperwork for individual Jobs (Truck builds) Helping with collections and deliveries (Trucks) Create status reports for key customers Liaise with colleagues and attend meetings of production plans Driving licence is required as visits to the local Truck storage depot may be required All tasks to be authorised by the Vehicle Movement Co-ordinator. If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
About the Role Are you an experienced Electrical Tester on the lookout for a new opportunity with a renowned construction services provider? Would you like to work for one of the UKs market-leading integrated support services for the construction industry? WysePower has a vacancy for an experienced Electrical Tester working from our Glasgow depot on sites around the Central Belt area of Scotland. The role will involve carrying out initial and periodic inspections of temporary electrical installations, responsible for the completion of all electrical certification. The successful candidate will be part of our on-site teams, supporting the Regional Manager. We offer 21 days holiday plus the 8 public holidays. A van and tablet will be provided as well as all PPE. The benefits include excellent opportunities for overtime and performance-based bonuses. Benefits We offer 21 days holiday plus the eight public holidays. Requirements WysePower isn't your typical employer; we believe in equal opportunity and the chance to prove you've got what it takes to reach the very top - that's why some of the most senior positions in our company are held by electrically trained personnel. Essential Skills NVQ L3 in Electrical Installations (or equivalent) JIB Gold card 18th edition, 2391-52 Test & Inspection SSSTS/SMSTS Full and valid UK driving licence Ability to work using your own initiative and to make decisions based on the information to hand Ideal Skills Experience in temporary electrics will be an advantage; however, not essential for the right hard-working individual JBRP1_UKTJ
Dec 06, 2025
Full time
About the Role Are you an experienced Electrical Tester on the lookout for a new opportunity with a renowned construction services provider? Would you like to work for one of the UKs market-leading integrated support services for the construction industry? WysePower has a vacancy for an experienced Electrical Tester working from our Glasgow depot on sites around the Central Belt area of Scotland. The role will involve carrying out initial and periodic inspections of temporary electrical installations, responsible for the completion of all electrical certification. The successful candidate will be part of our on-site teams, supporting the Regional Manager. We offer 21 days holiday plus the 8 public holidays. A van and tablet will be provided as well as all PPE. The benefits include excellent opportunities for overtime and performance-based bonuses. Benefits We offer 21 days holiday plus the eight public holidays. Requirements WysePower isn't your typical employer; we believe in equal opportunity and the chance to prove you've got what it takes to reach the very top - that's why some of the most senior positions in our company are held by electrically trained personnel. Essential Skills NVQ L3 in Electrical Installations (or equivalent) JIB Gold card 18th edition, 2391-52 Test & Inspection SSSTS/SMSTS Full and valid UK driving licence Ability to work using your own initiative and to make decisions based on the information to hand Ideal Skills Experience in temporary electrics will be an advantage; however, not essential for the right hard-working individual JBRP1_UKTJ
Forklift Engineer Nottingham, East Midlands (Ideally located: Derby, Ilkeston, Mansfield, Grantham, Leicester, Loughborough, Coalville) £37,000 - £40,000 + Van / Fuel Card + Overtime 1.5x + Training + Local Patch + Benefits Do you have Forklift, Material Handling or Plant experience looking to join one of the UK's leading dealerships enabling you to receive the best training, overtime rates and benefits as a result? On offer is a fantastic opportunity to join this company in a stable permanent role. You will be required to work on modern equipment, cover a local patch and maintain a good work life balance. The company are a multi-million pound access equipment dealership with a number of modern depot / offices throughout the UK. They are continuing the dominate the market and invest into their staff. This is a varied Monday - Friday days based role covering a local patch. You will travel to customer sites performing repairs and maintenance on a range of high-end Forklift and Material Handling Equipment. This role would suit a Service Engineer / Technician wanting a secure long-term role with a company who has a great reputation for looking after their staff. The role. Service and Maintenance on Access, Material Handling, Forklift equipment. Monday - Friday local field-based role. Electrical, Mechanical and Hydraulics involved. The person. Plant, Forklift, Material Handling experience. Full UK driving license. Local to area. JBRP1_UKTJ
Dec 05, 2025
Full time
Forklift Engineer Nottingham, East Midlands (Ideally located: Derby, Ilkeston, Mansfield, Grantham, Leicester, Loughborough, Coalville) £37,000 - £40,000 + Van / Fuel Card + Overtime 1.5x + Training + Local Patch + Benefits Do you have Forklift, Material Handling or Plant experience looking to join one of the UK's leading dealerships enabling you to receive the best training, overtime rates and benefits as a result? On offer is a fantastic opportunity to join this company in a stable permanent role. You will be required to work on modern equipment, cover a local patch and maintain a good work life balance. The company are a multi-million pound access equipment dealership with a number of modern depot / offices throughout the UK. They are continuing the dominate the market and invest into their staff. This is a varied Monday - Friday days based role covering a local patch. You will travel to customer sites performing repairs and maintenance on a range of high-end Forklift and Material Handling Equipment. This role would suit a Service Engineer / Technician wanting a secure long-term role with a company who has a great reputation for looking after their staff. The role. Service and Maintenance on Access, Material Handling, Forklift equipment. Monday - Friday local field-based role. Electrical, Mechanical and Hydraulics involved. The person. Plant, Forklift, Material Handling experience. Full UK driving license. Local to area. JBRP1_UKTJ
Three Shapes Management ( TSM ) - a £20m turnover group of five complimentary Construction & Surveying support businesses - are looking to add a suitably experienced Business Development Manager to our team in the North of England. The principal focus will be to generate new business leads for four of our businesses - SEP Engineers , SEP Geospatial , SEP Technical & SMT - by defining and delivering marketing strategies to obtain new customers and foster business relationships throughout the UK. The products & services offered by these businesses are: SEP Engineers - Established in 1986, specialises in the provision of Site Engineering & Surveying services to all manner of Construction projects - Setting-out, Quality Assurance & Record Keeping/As-built Surveying. SEP Geospatial - Hire, Sales & Servicing of Survey Equipment such as Total Stations, GPS Systems and Laser Levels, operating nationwide from depots in Lancashire, Cambridgeshire & Worcestershire. SEP Technical - Site Investigation & Monitoring services from Desk Studies to Intrusive Testing (Boreholes, CBRs), Concrete Scanning, Dust/Noise/Vibration Monitoring. SMT (Subsurface Measurement Technology) - Hire, Sale & Servicing of Subsurface Survey equipment including Ground Penetrating Radar (GPR), Drainage Inspection & Cable Detection systems. The duties and responsibilities of the role will include: Gaining an in-depth understanding of the offering of each business, both separately and collectively, and developing clear & concise communications, both verbal & non-verbal, to promote our products & services. Using Market Intelligence data, Research and Networking to identify business opportunities with new customers this will include scheduled and unscheduled visits to prospective customer sites and offices. Maximising sales opportunities with existing customers through Account Management activities. Planning and overseeing new marketing initiatives. Maintaining our Social Media channels (LinkedIn, Facebook and Instagram) with professional and relevant content. Attending conferences, meetings, and industry events. Involvement in the development of quotes and proposals for clients. Who we're looking for: To fulfil the role to the levels required we're looking for someone with a minimum of 10 years' experience selling products or services to Construction industry customers, particularly Contractors of all shapes & sizes. You will be a natural people person with the ability to establish and maintain good relationships by building trust and credibility. You will be a target-driven self-starter with a structured approach to your work. Although you'd be based from our Head Office in Lathom, West Lancashire, we expect the role to involve a significant amount of travelling to customer locations throughout the North West and beyond. Due to the mobility required, applicants must have a Full, and ideally clean, Driving Licence. What we offer: We feel this is an excellent opportunity to join and make your mark within a well-established, forward-thinking and highly-regarded business that has grown its revenues for each of the last 5 years. We offer a competitive Salary and Benefits package with an attractive Bonus structure. Our ambition is for each of the TSM group companies to be the biggest & best in their field and with the right Business Development Manager in place we're confident we can achieve this. If this sounds like something you'd like to be part of please hit the "Apply Now" button below. Three Shapes Management Ltd, and its subsidiaries, is an Equal Opportunities Employer. The company is committed to equal employment opportunities regardless of age, sexual orientation, gender, pregnancy, religion, nationality, ethnic origin, disability, medical history, skin colour, marital status, genetic information or parental status. We base all our employment decisions on merit, job requirements and business needs.
Dec 05, 2025
Full time
Three Shapes Management ( TSM ) - a £20m turnover group of five complimentary Construction & Surveying support businesses - are looking to add a suitably experienced Business Development Manager to our team in the North of England. The principal focus will be to generate new business leads for four of our businesses - SEP Engineers , SEP Geospatial , SEP Technical & SMT - by defining and delivering marketing strategies to obtain new customers and foster business relationships throughout the UK. The products & services offered by these businesses are: SEP Engineers - Established in 1986, specialises in the provision of Site Engineering & Surveying services to all manner of Construction projects - Setting-out, Quality Assurance & Record Keeping/As-built Surveying. SEP Geospatial - Hire, Sales & Servicing of Survey Equipment such as Total Stations, GPS Systems and Laser Levels, operating nationwide from depots in Lancashire, Cambridgeshire & Worcestershire. SEP Technical - Site Investigation & Monitoring services from Desk Studies to Intrusive Testing (Boreholes, CBRs), Concrete Scanning, Dust/Noise/Vibration Monitoring. SMT (Subsurface Measurement Technology) - Hire, Sale & Servicing of Subsurface Survey equipment including Ground Penetrating Radar (GPR), Drainage Inspection & Cable Detection systems. The duties and responsibilities of the role will include: Gaining an in-depth understanding of the offering of each business, both separately and collectively, and developing clear & concise communications, both verbal & non-verbal, to promote our products & services. Using Market Intelligence data, Research and Networking to identify business opportunities with new customers this will include scheduled and unscheduled visits to prospective customer sites and offices. Maximising sales opportunities with existing customers through Account Management activities. Planning and overseeing new marketing initiatives. Maintaining our Social Media channels (LinkedIn, Facebook and Instagram) with professional and relevant content. Attending conferences, meetings, and industry events. Involvement in the development of quotes and proposals for clients. Who we're looking for: To fulfil the role to the levels required we're looking for someone with a minimum of 10 years' experience selling products or services to Construction industry customers, particularly Contractors of all shapes & sizes. You will be a natural people person with the ability to establish and maintain good relationships by building trust and credibility. You will be a target-driven self-starter with a structured approach to your work. Although you'd be based from our Head Office in Lathom, West Lancashire, we expect the role to involve a significant amount of travelling to customer locations throughout the North West and beyond. Due to the mobility required, applicants must have a Full, and ideally clean, Driving Licence. What we offer: We feel this is an excellent opportunity to join and make your mark within a well-established, forward-thinking and highly-regarded business that has grown its revenues for each of the last 5 years. We offer a competitive Salary and Benefits package with an attractive Bonus structure. Our ambition is for each of the TSM group companies to be the biggest & best in their field and with the right Business Development Manager in place we're confident we can achieve this. If this sounds like something you'd like to be part of please hit the "Apply Now" button below. Three Shapes Management Ltd, and its subsidiaries, is an Equal Opportunities Employer. The company is committed to equal employment opportunities regardless of age, sexual orientation, gender, pregnancy, religion, nationality, ethnic origin, disability, medical history, skin colour, marital status, genetic information or parental status. We base all our employment decisions on merit, job requirements and business needs.
Powered Access Customer Support Engineer Glasgow based Check these questions out! If you say yes to one or more of them, then this could be the role for you! Are you an engineer and want to use your technical and engineering knowledge in a warmer environment? Are you someone who works in the automotive, fleet, construction plant or other engineering related industry within a technical helpline, customer service, administrative role and you fancy a change? Do you know a bit about engineering and think that you might be able to provide advice and guidance to customers and colleagues? Based from our office in Bellshill, Glasgow, we are looking for Technical Support Coordinator to join us. In this role you will be part of a small Technical team who take calls from our internal and external customers acting as a first response to any queries regarding our machines. As a Technical Support Coordinator, you'll love to help and resolve problems as you'll deal with a variety of people on the phone during the day covering a variety of issues. They might need some guidance and support using one of our machines or there might be a technical issue with the machine - whatever the query, you will be responsible for providing helpful advice and guidance in a positive manner ensuring that the problem is resolved efficiently. This role is located at our office in Bellshill and the hours are Monday - Friday 8am - 5.30pm. In reward we can offer a competitive salary, 25 days holiday + bank holidays, Westfield healthcare, Life assurance at x2 contractual salary, auto enrolment pension and access to retail discounts through our Lifestyle portal. About you: - Based commutable to our Glasgow office, with possible occasional visits to depot network and service providers. Demonstrable mechanical engineering knowledge (motor/fleet/automotive industry, powered access, construction). Demonstrable problem solving skills and an ability to find solutions under pressure. Credible communicator, oral and written, with an empathetic approach to customer service. Competent IT skills - MS Excel and Outlook with the ability to learn and operate internal systems. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON , a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment JBRP1_UKTJ
Dec 05, 2025
Full time
Powered Access Customer Support Engineer Glasgow based Check these questions out! If you say yes to one or more of them, then this could be the role for you! Are you an engineer and want to use your technical and engineering knowledge in a warmer environment? Are you someone who works in the automotive, fleet, construction plant or other engineering related industry within a technical helpline, customer service, administrative role and you fancy a change? Do you know a bit about engineering and think that you might be able to provide advice and guidance to customers and colleagues? Based from our office in Bellshill, Glasgow, we are looking for Technical Support Coordinator to join us. In this role you will be part of a small Technical team who take calls from our internal and external customers acting as a first response to any queries regarding our machines. As a Technical Support Coordinator, you'll love to help and resolve problems as you'll deal with a variety of people on the phone during the day covering a variety of issues. They might need some guidance and support using one of our machines or there might be a technical issue with the machine - whatever the query, you will be responsible for providing helpful advice and guidance in a positive manner ensuring that the problem is resolved efficiently. This role is located at our office in Bellshill and the hours are Monday - Friday 8am - 5.30pm. In reward we can offer a competitive salary, 25 days holiday + bank holidays, Westfield healthcare, Life assurance at x2 contractual salary, auto enrolment pension and access to retail discounts through our Lifestyle portal. About you: - Based commutable to our Glasgow office, with possible occasional visits to depot network and service providers. Demonstrable mechanical engineering knowledge (motor/fleet/automotive industry, powered access, construction). Demonstrable problem solving skills and an ability to find solutions under pressure. Credible communicator, oral and written, with an empathetic approach to customer service. Competent IT skills - MS Excel and Outlook with the ability to learn and operate internal systems. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON , a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment JBRP1_UKTJ
