MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
Dec 08, 2025
Full time
MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions Overview: First Military Recruitment is proudly working in partnership with a fantastic International Defence business who are looking to recruit multiple Weapons Trainers on a permanent basis due to growth based at their Lyneham depot. Duties and Responsibilities: Your role will entail the training of highly motivated students in all aspects of the trade, stripping and assembling, fault finding & repairs on most of the current in-service weapon systems. Within this role, you will be working as part of a highly motivated team, in a job that offers the highest level of job satisfaction along with an excellent work life balance. To prepare relevant training material, if necessary involving Media and Graphics Department input to provide relevant Weapons Training and maintain personal Course Training Plans (CPD) portfolio in respect of new technologies and equipment ensuring that lesson plans are training sessions are developed in accordance of the approved Course Training Plans (CTP). Ensuring student development through monitoring, feedback appraisal, discipline and training interventions, ensuring all supporting documentation is maintained and that any special student developmental needs or training delays are flagged to the Lead Trainer (LT). Delivery of remedial training and revision as necessary. Assessment of trainees to include: Creation of written examination and progress test papers, Creation of practical assessment/examination scenario and continuous assessments. Invigilation of examination and assessments. Successful candidate will work within the existing training team delivering high quality military apprentice training. Responsibility within the Trade Training areas for cleanliness, security, Health, Safety and Welfare (HSW), Control of Substances Hazardous to Health (COSHH) and environmental and engineering hygiene, ensuring that all students are fully aware of these requirements. Supervision of Students and Visitors to ensure full compliance with relevant H&S & PPE requirements and as relevant to the equipment training department, ensuring risks are adequately assessed and minimised. Ensuring that the correct equipment is used for each task. To ensure that procedures are understood and implemented in the course of carrying out any work tasks. Full training provided culminating in a Level 4 qualification (CET) Skills and Qualifications: An Armourer or Multi skilled mechanical engineer with high level of experience who would relish the challenge of a new job role. Engineering teaching experience in further education Minimum CGLI City & Guilds part 3 or above, NVQ Level 3 or equivalent military qualification. Minimum 5 years experience in engineering Have good craft/technical skills PC literate with Powerpoint and Word You must hold or have ability to obtain Baseline Personnel Security Standard (BPSS) security clearance MB326: Weapons Trainer Location: Lyneham Salary: £36,227 - £38,787 Working Hours: 07:30am - 16:30pm Mon to Fri (early finish on a Wednesday) Additional Company Benefits: PPE Supplied, Exceptional Career Development Opportunities, Heavily Discounted Gym Membership, Enhanced Pension Contributions
Role: Toolmaker Location: Cheltenham £40,000 - £42,000 Day Shift 7.45am - 4.45pm (12.30pm finish on Friday) Benefits flexible working and excellent benefits including 27 days holiday allowance (before bank holidays), 3 days' paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for a Toolmaker to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. In this hands-on role, you will be responsible for producing and maintaining tooling and ancillary equipment used in the manufacture, assembly, and testing of our product range. Responsibilities: Manufacturing and maintaining tooling and equipment for company operations globally. Supporting the Operations department on a day-to-day basis with any manufacturing, maintenance or quality issues. Ensuring compliance with Health & Safety regulations at all times. Collaborating with Operations and Process Engineering teams to resolve manufacturing, maintenance, and quality issues. Providing feedback on tooling design and suggesting improvements. Maintaining high standards of quality and ensuring equipment is fit for purpose. Supervising apprentices and supporting departmental KPIs and strategic goals. Actively contributing to projects and continuous improvement initiatives. Requirements: Tool and Fixture manufacture experience Experience in a production environment and familiarity with CNC and conventional manufacturing methods. Strong knowledge of manufacturing engineering principles. For further details, please contact Nick Sollis - or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Dec 08, 2025
Full time
Role: Toolmaker Location: Cheltenham £40,000 - £42,000 Day Shift 7.45am - 4.45pm (12.30pm finish on Friday) Benefits flexible working and excellent benefits including 27 days holiday allowance (before bank holidays), 3 days' paid volunteering leave, comprehensive private healthcare, enhanced pension plan, life assurance, optional participation in a Share Ownership Plan, free onsite parking. This market leading engineering company are recruiting for a Toolmaker to join their site in Cheltenham. The company manufacture and supply a range of specialist products to various industries across the globe. In this hands-on role, you will be responsible for producing and maintaining tooling and ancillary equipment used in the manufacture, assembly, and testing of our product range. Responsibilities: Manufacturing and maintaining tooling and equipment for company operations globally. Supporting the Operations department on a day-to-day basis with any manufacturing, maintenance or quality issues. Ensuring compliance with Health & Safety regulations at all times. Collaborating with Operations and Process Engineering teams to resolve manufacturing, maintenance, and quality issues. Providing feedback on tooling design and suggesting improvements. Maintaining high standards of quality and ensuring equipment is fit for purpose. Supervising apprentices and supporting departmental KPIs and strategic goals. Actively contributing to projects and continuous improvement initiatives. Requirements: Tool and Fixture manufacture experience Experience in a production environment and familiarity with CNC and conventional manufacturing methods. Strong knowledge of manufacturing engineering principles. For further details, please contact Nick Sollis - or email your cv Omega Resource Group are an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. We are always seeking Engineering Staff, Senior Managers, Skilled and Semi-Skilled Machinists, Mechanical Fitters, Electrical Fitters, Quality Engineers, Materials Science Engineers, Maintenance Engineers, Electronics Engineers, Test Technicians, Technical Authors and Laboratory Technicians to name but a few. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Electrical Bias Maintenance Engineer (80/20) Salary: 48,000 - 50,000 Location: S81 7QB Permanent - 2-Week Rostered Days (12-Hour Shifts) We are currently looking an Electrically Biased Maintenance Engineers to join a leading food manufacturing site. This is a fantastic opportunity to become part of a highly automated production facility, supporting ongoing performance, reliability and continuous improvement across the plant. Role Overview You'll play a key role in maintaining and improving machinery performance, responding to breakdowns and delivering planned maintenance. With an 80/20 electrical/mechanical split, this position is ideal for engineers with strong electrical competency and solid mechanical understanding. Shift Pattern Panama Days This pattern provides excellent work-life balance with generous time off built into the rota. What We're Looking For Electrically biased maintenance background (80/20 split) Experience working in a fast-paced industrial/manufacturing environment Ability to fault-find, repair and maintain automated equipment Proactive mindset with a focus on safety, reliability and efficiency HNC/ONC Electrical Engineering What's on Offer Attractive salary of 48,000 - 50,000 Opportunity to join an established and expanding manufacturer Supportive engineering team with excellent development potential If you're a skilled Electrical Maintenance Engineer looking for a fresh challenge in a well-established production environment, we'd love to hear from you. Send your CV for a confidential discussion or call on (phone number removed).
Dec 08, 2025
Full time
Electrical Bias Maintenance Engineer (80/20) Salary: 48,000 - 50,000 Location: S81 7QB Permanent - 2-Week Rostered Days (12-Hour Shifts) We are currently looking an Electrically Biased Maintenance Engineers to join a leading food manufacturing site. This is a fantastic opportunity to become part of a highly automated production facility, supporting ongoing performance, reliability and continuous improvement across the plant. Role Overview You'll play a key role in maintaining and improving machinery performance, responding to breakdowns and delivering planned maintenance. With an 80/20 electrical/mechanical split, this position is ideal for engineers with strong electrical competency and solid mechanical understanding. Shift Pattern Panama Days This pattern provides excellent work-life balance with generous time off built into the rota. What We're Looking For Electrically biased maintenance background (80/20 split) Experience working in a fast-paced industrial/manufacturing environment Ability to fault-find, repair and maintain automated equipment Proactive mindset with a focus on safety, reliability and efficiency HNC/ONC Electrical Engineering What's on Offer Attractive salary of 48,000 - 50,000 Opportunity to join an established and expanding manufacturer Supportive engineering team with excellent development potential If you're a skilled Electrical Maintenance Engineer looking for a fresh challenge in a well-established production environment, we'd love to hear from you. Send your CV for a confidential discussion or call on (phone number removed).
Manufacturing Futures is looking to recruit a Business Development Manager for a well-established manufacturer based in South Yorkshire. Our client work within heavy industry and focus on mechanically engineered solutions. The successful Business Development Manager will have a strong background in either machinery, precision engineering, pressure vessels, heat exchangers, flow control equipment or exotic metals and have the ability to open new doors for the business moving forward. Business Development Manager - Role and Responsibilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Negotiating sales and contractual terms of business, using pricing structures to win and maintain profitable long-term accounts. Regularly updating company systems, detailing prospecting work conducted, sales pipeline and outcomes. Where required, travelling to appointments across the UK. Meeting customers face to face virtually. Identification of new market sectors and potential customers, developing and maintaining a targeted sales pipeline to consistently initiate contact and win new business. Producing and presenting tailored quotations and proposals to meet customer needs and profitability targets. Liaising with relevant internal departments, including the product and commercial teams, to obtain information and advice about products, services, and promotions. Using market awareness and product knowledge to provide prospective customers with detailed information and compelling proposals to secure new accounts. Business Development Manager - Skills and Abilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Recent proven experience in new business development, or lead generating sales role. Experience within mechanical engineering: Heavy Industry, Precision Engineering, CNC, Fabrication, Metals, Flow Control, etc. Ability to work with and develop business opportunities. Car owner/driver Strong IT skills (i.e., Outlook, Excel, and PowerPoint) Business Development Manager, Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals If this sounds like you or you are interested to find out more, click apply now!
Dec 07, 2025
Full time
Manufacturing Futures is looking to recruit a Business Development Manager for a well-established manufacturer based in South Yorkshire. Our client work within heavy industry and focus on mechanically engineered solutions. The successful Business Development Manager will have a strong background in either machinery, precision engineering, pressure vessels, heat exchangers, flow control equipment or exotic metals and have the ability to open new doors for the business moving forward. Business Development Manager - Role and Responsibilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Negotiating sales and contractual terms of business, using pricing structures to win and maintain profitable long-term accounts. Regularly updating company systems, detailing prospecting work conducted, sales pipeline and outcomes. Where required, travelling to appointments across the UK. Meeting customers face to face virtually. Identification of new market sectors and potential customers, developing and maintaining a targeted sales pipeline to consistently initiate contact and win new business. Producing and presenting tailored quotations and proposals to meet customer needs and profitability targets. Liaising with relevant internal departments, including the product and commercial teams, to obtain information and advice about products, services, and promotions. Using market awareness and product knowledge to provide prospective customers with detailed information and compelling proposals to secure new accounts. Business Development Manager - Skills and Abilities - Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals Recent proven experience in new business development, or lead generating sales role. Experience within mechanical engineering: Heavy Industry, Precision Engineering, CNC, Fabrication, Metals, Flow Control, etc. Ability to work with and develop business opportunities. Car owner/driver Strong IT skills (i.e., Outlook, Excel, and PowerPoint) Business Development Manager, Sales, Mechanical Engineering, Precision Engineering, CNC, Heavy Industry, Metals If this sounds like you or you are interested to find out more, click apply now!
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Here in Boston we employ around 400 colleagues and produce ready to eat salads, prepared vegetables and snacks for many of the major retailers such as Coop, Boots, Greggs, Costco, Spar and BOL. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Shift pattern: 3's & 2's permanent days What you'll be doing: Complete planned and preventative maintenance on plant and equipment to maximise equipment reliability and performance Ensure the DAF Plant is running to efficiently to ensure optimum efficiency. Ensuring plant equipment, boiler houses, utilities are more are in correct working order. Carry out fault finding, problem solving to establish route causes and identify and implement fixes to address plant or equipment issues Comply with all Greencore health and safety standards, safe systems of work and standard operating procedures in addition to legislative and compliance standards and controls to ensure all work is carried out correctly and safely Complete all necessary documentation in an accurate and timely fashion to ensure that comprehensive reporting and history is maintained and that records are always audit-ready Identify and recommend opportunities for improvements on plant equipment efficiency and effectiveness Support the site maintenance team where required to ensure operational efficiency and effectiveness What we're looking for: Experience in a similar role or experience gained on the job as an engineering apprentice People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Can evidence electrical and / or mechanical skills and ability Evidence experience gained in a manufacturing environment Experience with problem solving and root cause identification, supported by the delivery of sustainable solutions Experience working with others as part of a diverse team Evidence of good communication skills (both written and verbal) Experienced working with computers We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Enhanced parental leave and menopause policies Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Vehicle Technician/ MOT Tester -Salford Salary Up to £40,000 Basic + 1.5k sign on bonus + Efficiency Bonus + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 28861 We have a new job vacancy available for a Vehicle Technician/ MOT Tester in Salford. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician/ MOT Tester wanting to join agreat team! This is a great opportunity for a Vehicle Technician/ MOT Tester looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician/ MOT Tester currently on the lookout then apply now! Vehicle Technician / MOT Tester Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician / MOT Tester Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician / MOT Tester Requirements: Full UK driving license NVQ or IMI level 3 ideally but we will also consider level 2 with experience Octane Recruitment Consultant Al-amin Abiru VTNTH Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Dec 07, 2025
Full time
Vehicle Technician/ MOT Tester -Salford Salary Up to £40,000 Basic + 1.5k sign on bonus + Efficiency Bonus + Overtime DOE & Qualifications Days Monday Friday, 8:30am - 5pm, Saturdays on a rota Ref 28861 We have a new job vacancy available for a Vehicle Technician/ MOT Tester in Salford. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician/ MOT Tester wanting to join agreat team! This is a great opportunity for a Vehicle Technician/ MOT Tester looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician/ MOT Tester currently on the lookout then apply now! Vehicle Technician / MOT Tester Benefits: Excellent Bonus Opportunities In house training opportunities for career progression Great pension scheme Company Discounts Vehicle Technician / MOT Tester Role: Carry out servicing and maintenance of all vehicles Electrical, mechanical, and hydraulic fault diagnosis and repair, this work may include warranty approved work in line with our brand parameters Department of Transport (MOT) testing duties (if qualified) Vehicle Technician / MOT Tester Requirements: Full UK driving license NVQ or IMI level 3 ideally but we will also consider level 2 with experience Octane Recruitment Consultant Al-amin Abiru VTNTH Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 07, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our site in Kiveton employs over 600 and is the UK's largest quiche bakery, producing more than 42 million quiche each year along with a wide range of ready meals and soups. What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Electrically biased Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Inspection Engineer CAT 2 Pressure Equipment Full time permanent position TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. Job Summary As part of the TUV family, TUV Rheinland Industrial Services (TRIS) are looking to recruit Inspection Engineers for the UK. We are seeking experenced inspectors to join our growing Industrial team to provide Inspection and Certification of pressurised static equipment e.g. vessels, tanks, piping, relief devices, to meet regulatory and client requirements. We offer comprehensive training, flexible working, and a great pay and benefits package. Job Description Preparing and reviewing Written Schemes of Examination (WSE) Identifying preparation requirements from the WSE Examination in accordance with the WSE Undertaking simple NDT ultrasonic thickness checks, magnetic particle, dye penetrant Coordination of NDT providers for extensive requirements or specialist methods, Preparation of clear reports including photographs Assessment of deterioration Reviewing design calculations and sentencing defects Coordinating repairs. Participation in Risk Based Inspection studies Education / Certificates HNC/Degree Mechanical Engineering (or equivalent) Incorporated Engineer status (desirable) Experience & Skills Good verbal and written communication skills Eye for detail Ability to accurately follow procedures Understanding of engineering principles Able to make and defend difficult decisions Ability to interact and work with others Mechanical Engineering background Chemical and/or oil and gas sector experience (desirable) Understanding of fabrication or repair of pressure equipment (desirable) Experience of non-destructive examination techniques (desirable) Man-management experience (desirable) Your future career prospects look good If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. What can we offer? Standard hours Monday to Friday 40 hours per week. Overtime available. Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday. Permanent full-time position, office, client site, and home based hybrid working. Accredited training to internationally recognised engineering appointment. Company car on completion of training and appointment Career progression opportunities with structured development. Opportunities to work in many sectors of UK industry. JBRP1_UKTJ
Dec 07, 2025
Full time
Inspection Engineer CAT 2 Pressure Equipment Full time permanent position TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. Job Summary As part of the TUV family, TUV Rheinland Industrial Services (TRIS) are looking to recruit Inspection Engineers for the UK. We are seeking experenced inspectors to join our growing Industrial team to provide Inspection and Certification of pressurised static equipment e.g. vessels, tanks, piping, relief devices, to meet regulatory and client requirements. We offer comprehensive training, flexible working, and a great pay and benefits package. Job Description Preparing and reviewing Written Schemes of Examination (WSE) Identifying preparation requirements from the WSE Examination in accordance with the WSE Undertaking simple NDT ultrasonic thickness checks, magnetic particle, dye penetrant Coordination of NDT providers for extensive requirements or specialist methods, Preparation of clear reports including photographs Assessment of deterioration Reviewing design calculations and sentencing defects Coordinating repairs. Participation in Risk Based Inspection studies Education / Certificates HNC/Degree Mechanical Engineering (or equivalent) Incorporated Engineer status (desirable) Experience & Skills Good verbal and written communication skills Eye for detail Ability to accurately follow procedures Understanding of engineering principles Able to make and defend difficult decisions Ability to interact and work with others Mechanical Engineering background Chemical and/or oil and gas sector experience (desirable) Understanding of fabrication or repair of pressure equipment (desirable) Experience of non-destructive examination techniques (desirable) Man-management experience (desirable) Your future career prospects look good If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability. What can we offer? Standard hours Monday to Friday 40 hours per week. Overtime available. Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday. Permanent full-time position, office, client site, and home based hybrid working. Accredited training to internationally recognised engineering appointment. Company car on completion of training and appointment Career progression opportunities with structured development. Opportunities to work in many sectors of UK industry. JBRP1_UKTJ
Continuous Improvement Engineer (known internally as Process Lead) Hellaby (Home of KP Nuts) On-site Monday - Friday 07:30 - 16:00 Join our snack-loving team We're looking for a Continuous Improvement Engineer to join us at KP Snacks. If you're ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you - this could be your next big move. About the role This is a stretching and rewarding role within our high-performing Manufacturing team. You'll be at the heart of driving performance improvements across our production lines, using lean manufacturing tools and coaching colleagues to embed new ways of working. You'll take ownership of key systems and processes, helping us reduce losses, improve changeovers and build capability across the site. What's in it for you? We believe in rewarding our colleagues and helping them thrive. Here's a flavour of what we offer: Annual bonus scheme Comprehensive healthcare support - including Medicash Health Cash Plan or Private Healthcare, Digital GP, Best Doctors second opinion service and specialist cancer care KP Pension Plan - contribution matching up to 7% of your salary 25 days holiday, plus the option to buy more KP4ME - our online platform for benefits, discounts, wellbeing tools and more What will you be doing? Leading the development and ownership of the Centre Line Management System for your manufacturing line(s), ensuring consistent performance and control Coaching Equipment Owners to identify and respond to deviations, improve changeover procedures and embed best practice across the site Conducting weekly health checks to assess gaps in our Daily Management Systems and implementing effective countermeasures Analysing machine data to identify and eliminate losses, managing our online data capture system and sharing insights to drive improvement Participating in daily performance reviews with Line Leads to prioritise actions, allocate resources and report on results, while supporting site safety and hygiene initiatives in collaboration with our specialists Who are we? We're KP Snacks, part of the Intersnack family. Across more than 30 countries, over 15,000 of us work together to make the snacks people love - from Hula Hoops to McCoy's. In the UK, we're a team of around 2,400 colleagues, based across seven sites and our Slough HQ. We're proud of our close-knit culture, where we speak up, celebrate differences and push boundaries together. We're committed to inclusion We're building a workplace where everyone belongs. If you don't tick every box, we'd still love to hear from you - your unique perspective could be just what we need. And if there's anything we can do to make the process easier for you, just let us know. We'd love to hear from you if you can bring: A Mechanical Engineering degree or completed Mechanical Engineering apprenticeship Experience in a world-class manufacturing environment, ideally within FMCG Advanced Microsoft Excel skills and confidence working with data Strong coaching and communication skills, with the ability to positively influence change and build capability A curious mindset, with a passion for problem solving, continuous learning and sharing solutions
Dec 07, 2025
Full time
Continuous Improvement Engineer (known internally as Process Lead) Hellaby (Home of KP Nuts) On-site Monday - Friday 07:30 - 16:00 Join our snack-loving team We're looking for a Continuous Improvement Engineer to join us at KP Snacks. If you're ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you - this could be your next big move. About the role This is a stretching and rewarding role within our high-performing Manufacturing team. You'll be at the heart of driving performance improvements across our production lines, using lean manufacturing tools and coaching colleagues to embed new ways of working. You'll take ownership of key systems and processes, helping us reduce losses, improve changeovers and build capability across the site. What's in it for you? We believe in rewarding our colleagues and helping them thrive. Here's a flavour of what we offer: Annual bonus scheme Comprehensive healthcare support - including Medicash Health Cash Plan or Private Healthcare, Digital GP, Best Doctors second opinion service and specialist cancer care KP Pension Plan - contribution matching up to 7% of your salary 25 days holiday, plus the option to buy more KP4ME - our online platform for benefits, discounts, wellbeing tools and more What will you be doing? Leading the development and ownership of the Centre Line Management System for your manufacturing line(s), ensuring consistent performance and control Coaching Equipment Owners to identify and respond to deviations, improve changeover procedures and embed best practice across the site Conducting weekly health checks to assess gaps in our Daily Management Systems and implementing effective countermeasures Analysing machine data to identify and eliminate losses, managing our online data capture system and sharing insights to drive improvement Participating in daily performance reviews with Line Leads to prioritise actions, allocate resources and report on results, while supporting site safety and hygiene initiatives in collaboration with our specialists Who are we? We're KP Snacks, part of the Intersnack family. Across more than 30 countries, over 15,000 of us work together to make the snacks people love - from Hula Hoops to McCoy's. In the UK, we're a team of around 2,400 colleagues, based across seven sites and our Slough HQ. We're proud of our close-knit culture, where we speak up, celebrate differences and push boundaries together. We're committed to inclusion We're building a workplace where everyone belongs. If you don't tick every box, we'd still love to hear from you - your unique perspective could be just what we need. And if there's anything we can do to make the process easier for you, just let us know. We'd love to hear from you if you can bring: A Mechanical Engineering degree or completed Mechanical Engineering apprenticeship Experience in a world-class manufacturing environment, ideally within FMCG Advanced Microsoft Excel skills and confidence working with data Strong coaching and communication skills, with the ability to positively influence change and build capability A curious mindset, with a passion for problem solving, continuous learning and sharing solutions
Vehicle Technician Location: Sunderland Salary: OTE up to £40,600, including basic Hours: Monday to Friday, 8:30am to 5:30pm,1 in 3 Saturdays Reference: 29107 We have a new job vacancy available for a Vehicle Technician in Sunderland. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician wanting to join agreat team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician currently on the lookout then apply now! Benefits for Vehicle Technicians Starting salary competitive within the industry or Attractive starting salary Company pension scheme Generous holiday allowance Role Overview Vehicle Technician Perform vehicle servicing and general maintenance Diagnose faults and perform fault finding Repair and replace brakes, suspension, and clutch components Cambelt replacement Requirements Vehicle Technician At least one years experience in a workshop environment Minimum Level 2 in Light Vehicle Maintenance & Repair (or equivalent) Strong mechanical skills Reliable work history with consistent attendance Own a well stocked toolbox appropriate for workshop duties How to Apply If you are interested in this Vehicle Technician vacancy, please send your CV and we will be in touch upon receipt. All applications will be treated with the strictest confidence. Consultant: Bethany Bishop Octane Recruitment VTNTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Dec 07, 2025
Full time
Vehicle Technician Location: Sunderland Salary: OTE up to £40,600, including basic Hours: Monday to Friday, 8:30am to 5:30pm,1 in 3 Saturdays Reference: 29107 We have a new job vacancy available for a Vehicle Technician in Sunderland. My client is one of the UK's leading main dealerships in thearea and they're looking for an experienced Vehicle Technician wanting to join agreat team! This is a great opportunity for a Vehicle Technician looking to work for and alongside one of the best in the industry. If you're a Vehicle Technician currently on the lookout then apply now! Benefits for Vehicle Technicians Starting salary competitive within the industry or Attractive starting salary Company pension scheme Generous holiday allowance Role Overview Vehicle Technician Perform vehicle servicing and general maintenance Diagnose faults and perform fault finding Repair and replace brakes, suspension, and clutch components Cambelt replacement Requirements Vehicle Technician At least one years experience in a workshop environment Minimum Level 2 in Light Vehicle Maintenance & Repair (or equivalent) Strong mechanical skills Reliable work history with consistent attendance Own a well stocked toolbox appropriate for workshop duties How to Apply If you are interested in this Vehicle Technician vacancy, please send your CV and we will be in touch upon receipt. All applications will be treated with the strictest confidence. Consultant: Bethany Bishop Octane Recruitment VTNTH Octane Recruitment is a leading recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment covers a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Job Title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management . Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 07, 2025
Full time
Job Title: Principal Mechanical Engineer - PNED Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: £45,628 - £57,500 dependent on experience What you'll be doing: Collaborate closely with the build organisation, providing engineering support to ensure the final product aligns with original design intent Demonstrate a strong understanding of key requirements and critical dimensions related to major structural components Lead the assessment and implementation of design changes impacting primary structural elements, whether driven by emergent issues, continuous improvement, or process updates Support, or where appropriate, serve as the engineering representative within test and authorisation groups Develop specialised knowledge of the unique build sequence of the Reactor Compartment Unit and deliver ongoing engineering support throughout construction Represent the engineering function during the planning and execution of major construction milestones within the Reactor Compartment Unit's scope Investigate and present robust technical solutions to challenges encountered during the construction of the Naval Reactor Plant Provide well-reasoned technical recommendations to key stakeholders, including Rolls-Royce and the Ministry of Defence, to support or constructively challenge existing requirements Your skills and experiences: Essential: Degree-level qualification in Engineering, preferably with a focus on Mechanical or Structural disciplines Proficient in interpreting mechanical drawings, with a solid understanding of geometric dimensioning and tolerancing (GD&T) Familiarity with welding engineering principles and non-destructive examination (NDE) techniques Strong technical report writing skills, with experience in producing clear justifications for design changes Desirable: Understanding of stress, fatigue, and thermal analysis principles in engineering applications Awareness of nuclear radiation shielding requirements and best practices Prior experience working within a nuclear plant environment Knowledge of the nuclear industry, including familiarity with regulatory bodies and compliance standards Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Nuclear Engineering Department team: As a Principal Mechanical Engineer - PNED, you will play a critical role in supporting the design, build, and test phases of the Naval Reactor Plant (NRP) across multiple programmes, ensuring alignments with the original design intent. This includes leading the resolution of complex technical issues encountered during construction and testing, with a focus on developing robust engineering solutions and maintaining the integrity of the supporting safety case. You will provide expert guidance to internal teams including Engineering Delivery, Test & Commissioning, Operations, and Project Management . Additionally, you will represent the business in collaboration with key external stakeholders, including the Ministry of Defence (MoD) and Rolls-Royce Power, ensuring effective coordination across the wider enterprise. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Weybridge Competitive Salary + Bonus + Benefits Are you fully qualified in HVAC or Building Services Engineering with expertise in delivering system designs and technical quotations for Commercial clients? If so, this could your opportunity to join our forward-thinking, collaborative team of professionals, who can aid your progression. Whats In It For You? Supportive team of experts, to help aid your professional development. Annual bonus scheme to acknowledge and rewards your appreciated efforts. Private Medical / Dental Insurance and Healthcare cashback plan. Employer Pension Contributions at 7%. About You: You have existing Technical Pre Sales experience gained within the HVAC industry, with a sharp analytical mindset and passion for precision. You have great knowledge of VRV / VRF systems with an eagerness to learn more. Educated with a BEng/MSc in Mechanical Engineering/Thermodynamics, HVAC or Building Services Engineering related studies. How You Can Play Your Part: Deliver accurate and tailored technical design solutions including heat load calculations, aligned to specific requirements. Essentially playing a crucial role, in delivering quality pre-sales technical solutions and commercial propositions to meet/exceed our customers needs. Seamlessly communicating with other divisions such as; account managers, external sales, while also working collaboratively within our dedicated pre-sales team. An excellent environment, where you can develop your career, while progression is not only possible, but encouraged. Your Interview Journey: Interview 1: Introduction and Exploration Call With:Your Daikin Recruitment Business Partner Purpose:For you to get the lowdown on Daikin; who we are, what we do, and what makes us tick. It also provides us with an opportunity to understand your experiences, motivations, and personality. Interview 2: Structured Interview With:Hiring Manager Purpose:A detailed discussion to explore your work experience and delve into Daikin's operations, focusing on the specifics of the role. Interview 3: Final Formal Interview With:Hiring Manager and Team Leader Purpose:Your opportunity to demonstrate your technical knowledge while showcasing your leadership capabilities, for making an immediate impact. About Us: Daikin UK, provides innovative, premium quality, indoor climate management solutions to meet the changing needs of our residential, commercial, and industrial customers. Over 100 years of precision and innovation has helped Daikin UK build a worldwide reputation for quality and technology. We are committed to fostering a diverse and inclusive workplace where all employees and applicants are valued and respected. We believe that diversity in our team enhances creativity, innovation, and performance. We welcome applications from individuals of all backgrounds. Join us in creating an environment where everyone can thrive. JBRP1_UKTJ
Dec 07, 2025
Full time
Weybridge Competitive Salary + Bonus + Benefits Are you fully qualified in HVAC or Building Services Engineering with expertise in delivering system designs and technical quotations for Commercial clients? If so, this could your opportunity to join our forward-thinking, collaborative team of professionals, who can aid your progression. Whats In It For You? Supportive team of experts, to help aid your professional development. Annual bonus scheme to acknowledge and rewards your appreciated efforts. Private Medical / Dental Insurance and Healthcare cashback plan. Employer Pension Contributions at 7%. About You: You have existing Technical Pre Sales experience gained within the HVAC industry, with a sharp analytical mindset and passion for precision. You have great knowledge of VRV / VRF systems with an eagerness to learn more. Educated with a BEng/MSc in Mechanical Engineering/Thermodynamics, HVAC or Building Services Engineering related studies. How You Can Play Your Part: Deliver accurate and tailored technical design solutions including heat load calculations, aligned to specific requirements. Essentially playing a crucial role, in delivering quality pre-sales technical solutions and commercial propositions to meet/exceed our customers needs. Seamlessly communicating with other divisions such as; account managers, external sales, while also working collaboratively within our dedicated pre-sales team. An excellent environment, where you can develop your career, while progression is not only possible, but encouraged. Your Interview Journey: Interview 1: Introduction and Exploration Call With:Your Daikin Recruitment Business Partner Purpose:For you to get the lowdown on Daikin; who we are, what we do, and what makes us tick. It also provides us with an opportunity to understand your experiences, motivations, and personality. Interview 2: Structured Interview With:Hiring Manager Purpose:A detailed discussion to explore your work experience and delve into Daikin's operations, focusing on the specifics of the role. Interview 3: Final Formal Interview With:Hiring Manager and Team Leader Purpose:Your opportunity to demonstrate your technical knowledge while showcasing your leadership capabilities, for making an immediate impact. About Us: Daikin UK, provides innovative, premium quality, indoor climate management solutions to meet the changing needs of our residential, commercial, and industrial customers. Over 100 years of precision and innovation has helped Daikin UK build a worldwide reputation for quality and technology. We are committed to fostering a diverse and inclusive workplace where all employees and applicants are valued and respected. We believe that diversity in our team enhances creativity, innovation, and performance. We welcome applications from individuals of all backgrounds. Join us in creating an environment where everyone can thrive. JBRP1_UKTJ
Field Service Engineer Hours: Monday to Friday 7am 5pm Salary: £35,000pa - £40,000 basic salary £50,000 OTE Location: Uk Travel Home based Are you a hands-on engineer looking for a stable, rewarding career with a market leader in waste management equipment? This is a permanent opportunity due to expansion within the business, as a field service engineer you will be covering the UK. Benefits: Company car provided Enhanced Pension Overtime and on-call payments Field Service Engineer Responsibilities: Diagnose, repair, install and maintain waste balers, compactors and related equipment Deliver excellent technical support to clients across the UK Carry out routine servicing and preventative maintenance Log all job updates, photos and videos in real-time via your tablet Provide basic user training and support for customers Requirements: Proven experience as a Field Service Engineer or maintenance Strong fault-finding and mechanical/electrical diagnostic skills Confident working independently and managing your own workload Full UK driving licence Experience using hand tools, electrical tools and lifting equipment Field Service Engineers whether youre based in the North West, North East or around the M25, wed love to hear from you. Apply now with your CV or contact Megan at Probe Technical recruitment for more info. Please Note: Candidates must have the right to live and work in the UK. Our aim is to help you secure the best possible future for yourself & this is a totallyFREEservice to all our Candidates. If you believe that your skills and experience match what we are looking for please call me orAPPLYand I will be in touch. Should you want to learn more about any of ourMAINTENANCE, RELIABILITY & SERVICE ENGINEERINGvacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact meto have an informal, confidential chat. Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994 JBRP1_UKTJ
Dec 07, 2025
Full time
Field Service Engineer Hours: Monday to Friday 7am 5pm Salary: £35,000pa - £40,000 basic salary £50,000 OTE Location: Uk Travel Home based Are you a hands-on engineer looking for a stable, rewarding career with a market leader in waste management equipment? This is a permanent opportunity due to expansion within the business, as a field service engineer you will be covering the UK. Benefits: Company car provided Enhanced Pension Overtime and on-call payments Field Service Engineer Responsibilities: Diagnose, repair, install and maintain waste balers, compactors and related equipment Deliver excellent technical support to clients across the UK Carry out routine servicing and preventative maintenance Log all job updates, photos and videos in real-time via your tablet Provide basic user training and support for customers Requirements: Proven experience as a Field Service Engineer or maintenance Strong fault-finding and mechanical/electrical diagnostic skills Confident working independently and managing your own workload Full UK driving licence Experience using hand tools, electrical tools and lifting equipment Field Service Engineers whether youre based in the North West, North East or around the M25, wed love to hear from you. Apply now with your CV or contact Megan at Probe Technical recruitment for more info. Please Note: Candidates must have the right to live and work in the UK. Our aim is to help you secure the best possible future for yourself & this is a totallyFREEservice to all our Candidates. If you believe that your skills and experience match what we are looking for please call me orAPPLYand I will be in touch. Should you want to learn more about any of ourMAINTENANCE, RELIABILITY & SERVICE ENGINEERINGvacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact meto have an informal, confidential chat. Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994 JBRP1_UKTJ
Location : The Lothian School of Technology, Loanhead, near Edinburgh (on site) Salary: £30,000-£40,000 per annum, depending on experience Contract : Full-time (37.5 hours per week) (flexibility may be available) Benefits : 6% employer pension contribution Are you a skilled machinist who enjoys helping others learn, grow, and succeed? Do you want to use your expertise to make a difference in people's lives? Join the Lothian School of Technology, a newly formed charity dedicated to developing hands-on engineering and manufacturing skills for staff and intern students of all backgrounds. About the Role The Lothian School of Technology are looking for an enthusiastic, personable, and experienced Machine Shop Trainer and Supervisor to take the lead in running their new machine shop and training workshop alongside the eight clean and green tech companies working at the facility on the southside of Edinburgh. You'll ensure the space operates safely and efficiently, deliver engaging training sessions, and support staff and intern students as they develop practical skills and confidence. This is a fantastic opportunity for someone who enjoys both mentoring and making, and who wants to be part of a growing organisation with a strong social purpose. Key Responsibilities • Supervise the day-to-day running of the machine shop, ensuring it is safe, clean, and well organised. • Train and mentor staff and intern students in the safe and effective use of manual lathes, mills, grinders, and general workshop tools. • Develop and deliver high-quality training sessions, both one-to-one and in small groups. • Ensure all equipment is properly maintained and serviced and manage consumables and supplies. • Contribute to the design of new training programmes and help shape the future of our workshop facilities. About You The Lothian School of Technology looking for someone who is: • An experienced general machinist with at extensive hands-on experience in a professional workshop. • A natural trainer and mentor who enjoys sharing knowledge and seeing others progress. • Confident in manual machining techniques and workshop safety procedures. • Organised, practical, and proactive in keeping tools and equipment in top condition. • Comfortable taking responsibility for the smooth running of a shared space. Why Join the Lothian School of Technology? • Play a central role within an organisation supporting innovation in clean tech • Be part of a small, passionate team building something new and meaningful. • Use your technical skills to empower others and create lasting impact. • Help shape the training programmes and facilities from the ground up. • Enjoy a collaborative and supportive environment where your input matters. How to Apply Send your CV together with a supporting statement of no more than one side of A4 explaining why you would like to work for the Lothian School of Technology and what motivates you to help others learn practical skills. You may also have experience in the following: Machine Shop Supervisor, Machinist Trainer, Engineering Workshop Instructor, Technical Skills Trainer (Engineering), Mechanical Workshop Technician, Manufacturing Trainer, Machine Shop Manager, CNC / Manual Machinist (Training Role), Workplace Skills Instructor - Engineering, Engineering Skills Coach, Training Workshop Supervisor, Mechanical Engineering Technician (Training Focus), Vocational Engineering Trainer, Workshop Supervisor (Engineering / Manufacturing), Apprenticeship Instructor - Engineering / Machining REF-
Dec 07, 2025
Full time
Location : The Lothian School of Technology, Loanhead, near Edinburgh (on site) Salary: £30,000-£40,000 per annum, depending on experience Contract : Full-time (37.5 hours per week) (flexibility may be available) Benefits : 6% employer pension contribution Are you a skilled machinist who enjoys helping others learn, grow, and succeed? Do you want to use your expertise to make a difference in people's lives? Join the Lothian School of Technology, a newly formed charity dedicated to developing hands-on engineering and manufacturing skills for staff and intern students of all backgrounds. About the Role The Lothian School of Technology are looking for an enthusiastic, personable, and experienced Machine Shop Trainer and Supervisor to take the lead in running their new machine shop and training workshop alongside the eight clean and green tech companies working at the facility on the southside of Edinburgh. You'll ensure the space operates safely and efficiently, deliver engaging training sessions, and support staff and intern students as they develop practical skills and confidence. This is a fantastic opportunity for someone who enjoys both mentoring and making, and who wants to be part of a growing organisation with a strong social purpose. Key Responsibilities • Supervise the day-to-day running of the machine shop, ensuring it is safe, clean, and well organised. • Train and mentor staff and intern students in the safe and effective use of manual lathes, mills, grinders, and general workshop tools. • Develop and deliver high-quality training sessions, both one-to-one and in small groups. • Ensure all equipment is properly maintained and serviced and manage consumables and supplies. • Contribute to the design of new training programmes and help shape the future of our workshop facilities. About You The Lothian School of Technology looking for someone who is: • An experienced general machinist with at extensive hands-on experience in a professional workshop. • A natural trainer and mentor who enjoys sharing knowledge and seeing others progress. • Confident in manual machining techniques and workshop safety procedures. • Organised, practical, and proactive in keeping tools and equipment in top condition. • Comfortable taking responsibility for the smooth running of a shared space. Why Join the Lothian School of Technology? • Play a central role within an organisation supporting innovation in clean tech • Be part of a small, passionate team building something new and meaningful. • Use your technical skills to empower others and create lasting impact. • Help shape the training programmes and facilities from the ground up. • Enjoy a collaborative and supportive environment where your input matters. How to Apply Send your CV together with a supporting statement of no more than one side of A4 explaining why you would like to work for the Lothian School of Technology and what motivates you to help others learn practical skills. You may also have experience in the following: Machine Shop Supervisor, Machinist Trainer, Engineering Workshop Instructor, Technical Skills Trainer (Engineering), Mechanical Workshop Technician, Manufacturing Trainer, Machine Shop Manager, CNC / Manual Machinist (Training Role), Workplace Skills Instructor - Engineering, Engineering Skills Coach, Training Workshop Supervisor, Mechanical Engineering Technician (Training Focus), Vocational Engineering Trainer, Workshop Supervisor (Engineering / Manufacturing), Apprenticeship Instructor - Engineering / Machining REF-
Job Title: Roadside Mechanic Location: Chelmsford Salary: £40,000 base with average OTE£60,000 Rota -Based Shifts Between 06:00 Midnight The Roadside Mechanic Role We are looking for an experienced and customer-focused Roadside Mechanic to join a dynamic roadside assistance team based in Chelmsford. This is a field-based role where youll respond to a variety of vehicle breakdowns, providing expert technical support and repairs on the spotdirectly at the roadside. Youll start and finish from your driveway with no additional commute time required and will be equipped with the latest tools and technology to help drivers get moving again. Roadside Mechanic Benefits Competitive Base Salary of £40,000 Realistic On-Target Earnings of £50 - £60,000 Colleague Share Scheme become a co-owner in the business 23 Days Holiday + Bank Holidays, increasing to 25 with service Group Personal Pension Scheme matched contributions up to 6.5% Life Assurance 2x basic salary (4x for pension members), with flexible options up to 10x Family Leave Support including paid time off and flexible working options 24/7 Confidential Support Services for you and family members aged 16+ Car Salary Sacrifice Scheme (after 12 months) including EV options Full Breakdown Cover from Day One Exclusive Employee Discounts 1000s of savings on retail, tech, travel & more Roadside Mechanic Key Responsibilities Attend vehicle breakdowns and deliver roadside repairs or recovery Accurately diagnose faults using technical knowledge and diagnostic equipment Communicate clearly with customers, providing reassurance and updates Work independently across your patch while backed by a national technical support network Maintain your vehicle, tools, and equipment to a high standard About You Minimum Level 2 qualification in Light Vehicle Maintenance (or equivalent) Proven experience in diagnostics, electrics, and mechanical repairs Full UK Driving Licence Excellent communication and problem-solving skills Customer-focused mindset with a calm, professional approach Why Join Us? This is a fantastic opportunity to work for an established business that truly values its people. Youll play a vital role in supporting motorists across the Chelmsford area, while benefiting from ongoing training, great earning potential, and industry-leading benefits. Consultant: Liam Bolton - Octane Recruitment VTMDL Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Panel Beater, Panel Technician, Paint Sprayer, Paint Technician, MET Technician, SMART Repair Technician, Cosmetic Repair Technician, ADR Technician, Bodyshop Estimator, Vehicle Damage Assessor, VDA, Bodyshop Manager, Assistant Bodyshop Manager. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Dec 07, 2025
Full time
Job Title: Roadside Mechanic Location: Chelmsford Salary: £40,000 base with average OTE£60,000 Rota -Based Shifts Between 06:00 Midnight The Roadside Mechanic Role We are looking for an experienced and customer-focused Roadside Mechanic to join a dynamic roadside assistance team based in Chelmsford. This is a field-based role where youll respond to a variety of vehicle breakdowns, providing expert technical support and repairs on the spotdirectly at the roadside. Youll start and finish from your driveway with no additional commute time required and will be equipped with the latest tools and technology to help drivers get moving again. Roadside Mechanic Benefits Competitive Base Salary of £40,000 Realistic On-Target Earnings of £50 - £60,000 Colleague Share Scheme become a co-owner in the business 23 Days Holiday + Bank Holidays, increasing to 25 with service Group Personal Pension Scheme matched contributions up to 6.5% Life Assurance 2x basic salary (4x for pension members), with flexible options up to 10x Family Leave Support including paid time off and flexible working options 24/7 Confidential Support Services for you and family members aged 16+ Car Salary Sacrifice Scheme (after 12 months) including EV options Full Breakdown Cover from Day One Exclusive Employee Discounts 1000s of savings on retail, tech, travel & more Roadside Mechanic Key Responsibilities Attend vehicle breakdowns and deliver roadside repairs or recovery Accurately diagnose faults using technical knowledge and diagnostic equipment Communicate clearly with customers, providing reassurance and updates Work independently across your patch while backed by a national technical support network Maintain your vehicle, tools, and equipment to a high standard About You Minimum Level 2 qualification in Light Vehicle Maintenance (or equivalent) Proven experience in diagnostics, electrics, and mechanical repairs Full UK Driving Licence Excellent communication and problem-solving skills Customer-focused mindset with a calm, professional approach Why Join Us? This is a fantastic opportunity to work for an established business that truly values its people. Youll play a vital role in supporting motorists across the Chelmsford area, while benefiting from ongoing training, great earning potential, and industry-leading benefits. Consultant: Liam Bolton - Octane Recruitment VTMDL Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Panel Beater, Panel Technician, Paint Sprayer, Paint Technician, MET Technician, SMART Repair Technician, Cosmetic Repair Technician, ADR Technician, Bodyshop Estimator, Vehicle Damage Assessor, VDA, Bodyshop Manager, Assistant Bodyshop Manager. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments. JBRP1_UKTJ
Teknikal Specialist Recruitment are recruiting for a Maintenance Technician with an Electronics Bias. £45,000 DOE + Bonus + Private Healthcare + Profit Share Bedford (Ampthill area) Double Day Shift Further Education Support Award-Winning Employer What s In It for You?: Salary up to £45,000 DOE Profit share bonus scheme (up to 8%) Private healthcare package Financial support for further education 24 days holiday + bank holidays Gym and cinema discounts Ongoing technical and professional training Clear route for career development Double Days shift: Mon Fri (6am 2pm / 2pm 10pm) No weekend work The Role: Our client, a respected leader in precision components and advanced technology, is seeking a Maintenance Technician with an electronics bias to join their Bedfordshire facility. This role is ideal for someone experienced in electronic fault-finding who is keen to work in a cleanroom environment on a variety of high-spec equipment. You will be responsible for conducting preventative maintenance, diagnosing, and repairing electronic faults, and supporting production efficiency across electrical, electronic and some mechanical systems. You ll also play a part in stock management, process improvement, and ensuring high safety standards. What You ll Need: Apprenticeship or Level 3 qualification in Electronics or Electrical Engineering Experience working in a cleanroom or wafer fabrication setting (preferred) Strong skills in PCB fault-finding, soldering, and working with motors/control panels Ability to read electrical/electronic schematics Confident working with PPE and chemicals A proactive, team-oriented approach and willingness to learn This is a rare opportunity to join a growing business that invests in its people. APPLY NOW to take the next step in your maintenance engineering career. REFER A FRIEND AND GET UP-TO £250! Call me to find out how it works
Dec 07, 2025
Full time
Teknikal Specialist Recruitment are recruiting for a Maintenance Technician with an Electronics Bias. £45,000 DOE + Bonus + Private Healthcare + Profit Share Bedford (Ampthill area) Double Day Shift Further Education Support Award-Winning Employer What s In It for You?: Salary up to £45,000 DOE Profit share bonus scheme (up to 8%) Private healthcare package Financial support for further education 24 days holiday + bank holidays Gym and cinema discounts Ongoing technical and professional training Clear route for career development Double Days shift: Mon Fri (6am 2pm / 2pm 10pm) No weekend work The Role: Our client, a respected leader in precision components and advanced technology, is seeking a Maintenance Technician with an electronics bias to join their Bedfordshire facility. This role is ideal for someone experienced in electronic fault-finding who is keen to work in a cleanroom environment on a variety of high-spec equipment. You will be responsible for conducting preventative maintenance, diagnosing, and repairing electronic faults, and supporting production efficiency across electrical, electronic and some mechanical systems. You ll also play a part in stock management, process improvement, and ensuring high safety standards. What You ll Need: Apprenticeship or Level 3 qualification in Electronics or Electrical Engineering Experience working in a cleanroom or wafer fabrication setting (preferred) Strong skills in PCB fault-finding, soldering, and working with motors/control panels Ability to read electrical/electronic schematics Confident working with PPE and chemicals A proactive, team-oriented approach and willingness to learn This is a rare opportunity to join a growing business that invests in its people. APPLY NOW to take the next step in your maintenance engineering career. REFER A FRIEND AND GET UP-TO £250! Call me to find out how it works
Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 07, 2025
Full time
Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 18th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Coca-Cola Europacific Partners
East Kilbride, Lanarkshire
Coca-Cola Europacific Partners (CCEP) are looking to recruit Multi-Skilled Production Engineers, working at their site at Wakefield. If you are multi-skilled, either mechanically or electrically bias, then this is your opportunity to work at the biggest soft drinks factory in Europe. In this role, you will be working on a 3 on and 3 off shift pattern, alternating between nights and days. Roles and responsibilities for this role are:- To carry out planned and unplanned maintenance. Help develop maintenance plans and strategies with your Reliability Engineer. Clear communications to your Team Leader and Management team for safety/quality and reliability issues. Use SAP (CCMS) to sign off work tasks and order parts and materials for the lines. To apply for this role you'll need to be a Multi-Skilled Engineer and must be either apprenticeship qualified or hold an engineering-based NVQ level 3 or equivalent. You will also have: Strong experience within a manufacturing environment Proven diagnostic, problem solving and maintenance skills A mind-set for continuous improvement In return for your passion and expertise, you will receive an excellent benefits package, including an attractive salary of £55,182, bonus, share save scheme and employer contributed pension. The closing date for applications is 201/01/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
Dec 07, 2025
Full time
Coca-Cola Europacific Partners (CCEP) are looking to recruit Multi-Skilled Production Engineers, working at their site at Wakefield. If you are multi-skilled, either mechanically or electrically bias, then this is your opportunity to work at the biggest soft drinks factory in Europe. In this role, you will be working on a 3 on and 3 off shift pattern, alternating between nights and days. Roles and responsibilities for this role are:- To carry out planned and unplanned maintenance. Help develop maintenance plans and strategies with your Reliability Engineer. Clear communications to your Team Leader and Management team for safety/quality and reliability issues. Use SAP (CCMS) to sign off work tasks and order parts and materials for the lines. To apply for this role you'll need to be a Multi-Skilled Engineer and must be either apprenticeship qualified or hold an engineering-based NVQ level 3 or equivalent. You will also have: Strong experience within a manufacturing environment Proven diagnostic, problem solving and maintenance skills A mind-set for continuous improvement In return for your passion and expertise, you will receive an excellent benefits package, including an attractive salary of £55,182, bonus, share save scheme and employer contributed pension. The closing date for applications is 201/01/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.
Fortus Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the industry. We supply candidates from executive to operative level, and are currently working with a Housing Association who are looking for Commercial Gas Engineers in Brentwood. Duties: To maintain property services by delivering planned and reactive maintenance to an agreed programme, budget, and quality within the company's operational targets. Minimum of 5 years of Commercial Gas experience Familiarity with relevant gas safety standards and regulations. Act as the primary point of contact for all gas-related matters, ensuring adherence to industry standards and regulations. To conduct Planned Preventative Maintenance to all types of Commercial Boilers and Plant Room Equipment as per maintenance schedules. To attend reactive calls, diagnose faults, fit parts, and conduct repairs to boilers and ancillary mechanical systems, such as pumps, valves, pipework etc. Sound Knowledge, of Heating, and Hot Water system operation and control with understanding of system design. Installation experience of replacement plant and components such as: Boilers, Burners, Pumps, Pressurisation units, Valves, Pressure Switches Automatic Air Vents etc. Installation Pipework to include safe isolation of systems repairs and modification. Ability to conduct repairs within communal areas to Radiators, valves, and pipework. Identify faults and report issues in a timely manner. Consulting with Suppliers to obtain the necessary replacement component costs to include labour requirements and submitting these to the Commercial Gas team as required. To complete digital records PPM's planned works and reactive repairs for each task using Aston Group's ACIMs software. To comply with safe working practices ensuring the safety of the workforce and public is always maintained. Liaise with all stakeholders as required to ensure a high-quality service is delivered and a high level of customer satisfaction is achieved. Responsible for the delivery of planned commitments to the client, ensuring agreed KPI's and service levels are being met. To maintain a high standard of customer service for all internal and external facing activities. To attend toolbox talks. Ability to pass Enhanced DBS checks. To comply with the company's Health and Safety Policy at all times and follow all related safe systems of work. To undertake call out duties on a scheduled out of hours call out rota as required. Responsible for care and maintenance of vehicle; washes vehicle and cleans interior; takes vehicle to garage for maintenance and repair.To report any vehicle malfunctions to management as soon as possible. Qualifications Required: CCN1, CENWAT, HTR1, CKR1 DAH1 CODNCO1 CORT1 CIGA1 ICPN1 TPCP1A TPCP1 (desirable) BMP1 (desirable) IPAF/PASMA qualifications. (desirable) Salary & Benefits: Competitive Company van and fuel card 24 days holiday per year Pension with 4% salary sacrifice scheme employer contribution Death in Service benefit of 4 x salary Employee Assistance Programme Health Cash Plan Enhanced Family Friendly Policies Long Service Awards Additional holiday days based on length of service Ride to Work scheme If you or anyone you know are interested in the role, please apply or contact the office and ask for george. INDGG JBRP1_UKTJ
Dec 07, 2025
Full time
Fortus Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the industry. We supply candidates from executive to operative level, and are currently working with a Housing Association who are looking for Commercial Gas Engineers in Brentwood. Duties: To maintain property services by delivering planned and reactive maintenance to an agreed programme, budget, and quality within the company's operational targets. Minimum of 5 years of Commercial Gas experience Familiarity with relevant gas safety standards and regulations. Act as the primary point of contact for all gas-related matters, ensuring adherence to industry standards and regulations. To conduct Planned Preventative Maintenance to all types of Commercial Boilers and Plant Room Equipment as per maintenance schedules. To attend reactive calls, diagnose faults, fit parts, and conduct repairs to boilers and ancillary mechanical systems, such as pumps, valves, pipework etc. Sound Knowledge, of Heating, and Hot Water system operation and control with understanding of system design. Installation experience of replacement plant and components such as: Boilers, Burners, Pumps, Pressurisation units, Valves, Pressure Switches Automatic Air Vents etc. Installation Pipework to include safe isolation of systems repairs and modification. Ability to conduct repairs within communal areas to Radiators, valves, and pipework. Identify faults and report issues in a timely manner. Consulting with Suppliers to obtain the necessary replacement component costs to include labour requirements and submitting these to the Commercial Gas team as required. To complete digital records PPM's planned works and reactive repairs for each task using Aston Group's ACIMs software. To comply with safe working practices ensuring the safety of the workforce and public is always maintained. Liaise with all stakeholders as required to ensure a high-quality service is delivered and a high level of customer satisfaction is achieved. Responsible for the delivery of planned commitments to the client, ensuring agreed KPI's and service levels are being met. To maintain a high standard of customer service for all internal and external facing activities. To attend toolbox talks. Ability to pass Enhanced DBS checks. To comply with the company's Health and Safety Policy at all times and follow all related safe systems of work. To undertake call out duties on a scheduled out of hours call out rota as required. Responsible for care and maintenance of vehicle; washes vehicle and cleans interior; takes vehicle to garage for maintenance and repair.To report any vehicle malfunctions to management as soon as possible. Qualifications Required: CCN1, CENWAT, HTR1, CKR1 DAH1 CODNCO1 CORT1 CIGA1 ICPN1 TPCP1A TPCP1 (desirable) BMP1 (desirable) IPAF/PASMA qualifications. (desirable) Salary & Benefits: Competitive Company van and fuel card 24 days holiday per year Pension with 4% salary sacrifice scheme employer contribution Death in Service benefit of 4 x salary Employee Assistance Programme Health Cash Plan Enhanced Family Friendly Policies Long Service Awards Additional holiday days based on length of service Ride to Work scheme If you or anyone you know are interested in the role, please apply or contact the office and ask for george. INDGG JBRP1_UKTJ
We are currently in the market to recruit a Senior Electrical and ICA Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clients address major pollution and flooding challenges. As part of these programmes our wastewater consulting team undertake a broad range of projects including urban drainage and water quality modelling studies; WINEP, SOAF, DWMPs and catchment investment planning; and the development of engineering solutions from feasibility through to outline and detailed design. About The Team: As part of Tetra Tech. RPS Water Consulting is a team of engineers, designers, modellers, and data analysts providing asset management and operational strategy development, to our water industry clients to support business planning and delivery. This is an evolving industry, providing challenges and opportunities that require innovation, dedication and teamwork to help us meet our clients' needs. About You: You will be experienced in liaising with the client to understand fully their needs, interpret their data, and develop a project plan. You will be able to coordinate multidisciplinary teams to ensure that the project as a whole meets its goals. You will be experienced in producing technical outputs such as technical specifications, schedules, reports, load and instrument lists, cable sizing calculations, single line diagrams and system architecture layouts, and be familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering inputs and design outputs in collaboration with other disciplines, producing general arrangement drawings, 3D models, 2D plans and sections, and piping & instrumentation diagrams. To be successful in this role, you will have strong communication skills and be able to deliver technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops and safety reviews, including HAZOPs and ALMs. You will understand how water and wastewater treatment processes operate and be experienced in assessing existing site infrastructure to develop and deliver the electrical and ICA design. By joining us, you're not just taking on exciting projects and collaborating with leading minds. You're making a meaningful impact on millions of lives the UK, leaving a legacy for generations to come. As a valued member of our team, you'll play a crucial role in the water industry, and work with the largest water companies in the UK, ensuring a positive and enduring influence on the communities we serve. If you're ready to contribute your skills and expertise to a dynamic and innovative environment, we invite you to join us on this exciting journey. Your responsibilities: Balance your workload across a wide variety of projects from a range of major long-term frameworks with water companies and contractors across the UK. Seek to achieve positive outcomes for projects and the community. Work closely with other senior and principal engineers and other stakeholders supporting project delivery. Help to develop the wider team by acting as a mentor and guide to less experienced members, checking their work and providing technical governance and oversight. Interpret and understand technical drawings and supervise their production, ideally through AutoCAD and/or Inventor experience. Undertake asset condition surveys and prepare reports and recommendations. Contribute to the production of process and instrumentation diagrams (P&IDs). Prepare electrical and ICA design deliverables including calculations, reports, specifications, datasheets, drawings, schedules, and procurement documentation. Provide support to allow the project team to comply with the duties of Designer under CDM, including through the production of design risk assessments. Ensure quality assurance systems and procedures are followed, and that high standards are maintained. Act as a project manager, package manager or design team leader as required. Skills, knowledge, and experience: A good technical understanding of electrical engineering and ICA principles. Significant water industry experience. Proficient in: Load assessment and LV and MV distribution systems design The use of P&IDs to create equipment schedules ICA and SCADA system architecture development Production of URSs, FDSs and control philosophies The production of specifications, reports and technical documentation. Complying with the Construction, Design & Management (CDM) Regulations and designing for safety. Various methods of contract procurement and engagement, ideally including the NEC forms of contract Managing your work to time, cost, and quality criteria. Supporting junior staff in their technical and personal development. The ability to travel and visit operational and construction sites as required, to act in a safe manner, and to survey, inspect, and witness test mechanical equipment and installations. Knowledge of design tools and software such as AutoCAD or similar design packages would be an advantage but is not essential. Qualifications: A degree-level qualification in electrical engineering or a closely-allied subject, ideally IET- accredited. Postgraduate qualifications are an advantage. Chartered engineer or working towards and nearing chartership. JBRP1_UKTJ
Dec 07, 2025
Full time
We are currently in the market to recruit a Senior Electrical and ICA Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clients address major pollution and flooding challenges. As part of these programmes our wastewater consulting team undertake a broad range of projects including urban drainage and water quality modelling studies; WINEP, SOAF, DWMPs and catchment investment planning; and the development of engineering solutions from feasibility through to outline and detailed design. About The Team: As part of Tetra Tech. RPS Water Consulting is a team of engineers, designers, modellers, and data analysts providing asset management and operational strategy development, to our water industry clients to support business planning and delivery. This is an evolving industry, providing challenges and opportunities that require innovation, dedication and teamwork to help us meet our clients' needs. About You: You will be experienced in liaising with the client to understand fully their needs, interpret their data, and develop a project plan. You will be able to coordinate multidisciplinary teams to ensure that the project as a whole meets its goals. You will be experienced in producing technical outputs such as technical specifications, schedules, reports, load and instrument lists, cable sizing calculations, single line diagrams and system architecture layouts, and be familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering inputs and design outputs in collaboration with other disciplines, producing general arrangement drawings, 3D models, 2D plans and sections, and piping & instrumentation diagrams. To be successful in this role, you will have strong communication skills and be able to deliver technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops and safety reviews, including HAZOPs and ALMs. You will understand how water and wastewater treatment processes operate and be experienced in assessing existing site infrastructure to develop and deliver the electrical and ICA design. By joining us, you're not just taking on exciting projects and collaborating with leading minds. You're making a meaningful impact on millions of lives the UK, leaving a legacy for generations to come. As a valued member of our team, you'll play a crucial role in the water industry, and work with the largest water companies in the UK, ensuring a positive and enduring influence on the communities we serve. If you're ready to contribute your skills and expertise to a dynamic and innovative environment, we invite you to join us on this exciting journey. Your responsibilities: Balance your workload across a wide variety of projects from a range of major long-term frameworks with water companies and contractors across the UK. Seek to achieve positive outcomes for projects and the community. Work closely with other senior and principal engineers and other stakeholders supporting project delivery. Help to develop the wider team by acting as a mentor and guide to less experienced members, checking their work and providing technical governance and oversight. Interpret and understand technical drawings and supervise their production, ideally through AutoCAD and/or Inventor experience. Undertake asset condition surveys and prepare reports and recommendations. Contribute to the production of process and instrumentation diagrams (P&IDs). Prepare electrical and ICA design deliverables including calculations, reports, specifications, datasheets, drawings, schedules, and procurement documentation. Provide support to allow the project team to comply with the duties of Designer under CDM, including through the production of design risk assessments. Ensure quality assurance systems and procedures are followed, and that high standards are maintained. Act as a project manager, package manager or design team leader as required. Skills, knowledge, and experience: A good technical understanding of electrical engineering and ICA principles. Significant water industry experience. Proficient in: Load assessment and LV and MV distribution systems design The use of P&IDs to create equipment schedules ICA and SCADA system architecture development Production of URSs, FDSs and control philosophies The production of specifications, reports and technical documentation. Complying with the Construction, Design & Management (CDM) Regulations and designing for safety. Various methods of contract procurement and engagement, ideally including the NEC forms of contract Managing your work to time, cost, and quality criteria. Supporting junior staff in their technical and personal development. The ability to travel and visit operational and construction sites as required, to act in a safe manner, and to survey, inspect, and witness test mechanical equipment and installations. Knowledge of design tools and software such as AutoCAD or similar design packages would be an advantage but is not essential. Qualifications: A degree-level qualification in electrical engineering or a closely-allied subject, ideally IET- accredited. Postgraduate qualifications are an advantage. Chartered engineer or working towards and nearing chartership. JBRP1_UKTJ
