173 jobs found

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Training and Development: Excellent career progression, training and career development opportunities The opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

Production & Test Lead Technician job available in Waterbeach, Cambridgeshire A company that develops and manufactures thermal imaging equipment is currently looking for a Production & Test Lead Technician in Waterbeach, Cambridgeshire. The company, which is ISO 9001 certified and privately owned, was founded in 1982 and retains its position at the forefront of the infrared imaging industry. What you will need to apply for the Production & Test Lead Technician job in Waterbeach, Cambridgeshire: 5 years of experience in a similar environment An engineering or relevant qualification An understanding of electronic fundamentals and fault-finding skills using test equipment e.g. oscilloscopes Soldering to 0201 Experience with electro-mechanical products The Production & Test Lead Technician job in Waterbeach, Cambridgeshire will involve leading manufacturing and test processes, ensuring the efficient production of opto-electromechanical devices. This role would be suitable for a qualified production engineer who is thorough, possesses strong attention to detail, and can use initiative to solve problems. This role will be 5 days per week on-site.

ASRS (Automated Storage Retrieval System) Technician 2 (Multiskilled) - Wakefield Permanent - Full time Shift Pattern: Continental Shift Pattern: 7 pm- 7am (3 Days on / 3 days off / 3 nights on / 3 nights off). (+ 23 Holidays) Starting Salary: £55, 182 Structured Career Development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Laundered uniform and all safety equipment provided + Range of flexible benefits and Corporate discounts + Free parking + Overtime available + Free hot and cold drinks and subsidised canteen + Excellent parental benefits + Flexible working. What you become part of: Wakefield Distribution Centre is a 24/7 operation, our Automated Storage and Retrieval System (ASRS) warehouse holds 28,000 pallets, alongside a racked and block-stacked conventional warehouse of 12,000 pallets. The combined typical annual throughput is over three million pallets. Every 24 hours we expect to receive around 5,000 pallets from the on-site manufacturing operation, as well as handling around 360 vehicle movements at peak. What to expect: As a Multi Skill engineer based in the CCEP largest GB warehouse, you will be responsible for the efficient operation of the automated storage retrieval systems, including: maintenance, repairs, and attending to breakdowns. You will work as one of four shift-based teams of three engineers, that collective provide 24/7 operational cover, overseen by the Distribution Reliability Manager. Your core responsibilities within the ASRS: Safety: Operate within the Company Health and Safety management system Collaboration with team of site and centrally base H&S representatives. Responsible for critical inspections and defect reporting. Ensure the safe maintenance and repair of both ASRS and individual equipment. Uphold a safe system of work, adhering to SOP's e.g lockout tagout procedures. As part of the role, you will be trained as a member of the site emergency team, this includes engaging in rescue work at height and duties of a first aider. Operation: You will be expected to oversee the execution of an advanced maintenance plan while ensuring that direct and indirect KBIs are met. Perform both preventative and corrective maintenance on both electrical and mechanical systems (20/80 elec/mech) to guarantee that the warehouse's various components continue to function as intended. You will complete a site based electrical competency assessment and area familiarization before commencing work. Make efficient use of our Central Maintenance Management System Collaborate with a network of local and external engineering teams. Promote operational excellence by sharing best practices Innovate and enhance current systems and procedures. Providing technical assistance for product/equipment adjustments. Skills & Prerequisites: Apprentice Served in Mechatronics (Will also consider Electrical Engineering Apprenticeship with quantifiable Mechanical Experience Or Mechanical Engineering Apprenticeship with quantifiable electrical experience and willing to undertake the Electrical qualification). Note: We will not consider a Level 3 electrotechnical Buildings & Structures apprenticeship on it's own OR Level 3 NVQ or above in Mechanical and/or Engineering, alongside an additional academic qualification (CITY&Guilds 3 or above / BTEC / HNC / HND / Degree). You will be expected to undertake both a Mechanical and Electrical skills assessment during interview to confirm skill base. Proven knowledge and experience working within both Mechanical and Electrical Engineering Ability to work at height - up to 100ft (vertical climb in restricted spaces) Experience in 3 phase electrical systems and mechanical drive systems. Previous record of Process Compliance and Fault-Finding experience on both Mechanical and Electrical equipment. Understanding of the in/output of programable logic controllers (PLC) Awareness of PUWER / LOLER / LOTO The closing date for applications is 15/04/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.

Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes. You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations. Requirements Quality Control. Hands on experience in mechanical assembly, testing, or manufacturing environments. Familiarity with hydraulic, electronic, and mechanical systems. Responsibilities Perform technical duties across mechanical, electronic, and system-based projects. Conduct testing, measurements, and process controls on key production lines. Read and interpret engineering drawings and job documentation ( work orders, bills of materials). Troubleshoot and repair product or process issues. Maintain tools, machinery, and equipment to ensure operational efficiency. Support continuous improvement using modern manufacturing principles.

We are seeking a skilled Mechanical Fitter to join our clients team. In this role, you will be responsible for producing high-quality products to the required standards, as defined by drawings, written instructions, and guidance from the supervisor. Key Responsibilities: - Complete engineering duties for sub-assembly production, fitting, and final assembly - Assemble mechanical, electrical, pneumatic, hydraulic, and electronic components and sub-assemblies as required - Assist with the production and build of fabricated assemblies of varying size and complexity, using general skills such as marking out, cutting, folding, pipe bending, weld joint preparation, hydraulic runs, and pneumatic runs - Comply with the company's health and safety policies and procedures, ensuring your own safety and that of others - Perform any other duties as reasonably expected by the company Required Skills and Qualifications: - Solid engineering background with experience working from manufacturing drawings, general arrangement drawings, and sub-assembly drawings - Proficiency in using a variety of hand and power tools to assemble a wide range of large and small fabricated components - Ability to check the complete assembly for alignment, dimensions, and quality - Experience in vehicle fabricating/fitting is an advantage - Strong problem-solving skills and a logical mindset - Knowledge of pneumatics, hydraulics, and electrical circuitry - Background in aviation, military, marine, or a similar industry is desirable - Basic electrical assembly skills and the ability to read electrical circuit drawings are preferred but not essential This role is working Days, Monday-Friday and offers a competitive salary with bonus incentives. If you are an experienced Mechanical Fitter with a passion for delivering high-quality work, we encourage you to apply for this exciting role. Should this role be of interest, please submit your CV to Barry Salters, Email - (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

About the Company A leading provider of advanced engineering, installation, and maintenance solutions, supporting clients across a variety of industries including manufacturing, transportation, technology, and critical infrastructure. The company is recognised for delivering innovative technical solutions and exceptional customer service. Role Overview We are seeking a skilled and motivated Electrical Field Service Engineer to join a dynamic and growing team. This role involves the installation, maintenance, and repair of electrical and electronic equipment at client sites across the UK and internationally. The ideal candidate will be flexible, technically proficient, and committed to delivering outstanding service. Key Responsibilities Install, commission, and maintain electrical and electronic equipment at client locations. Diagnose and repair faults efficiently and professionally. Provide technical support and training to clients and end-users. Complete service reports and maintain accurate documentation. Ensure strict adherence to health and safety regulations. Participate in a rotating on-call schedule, including weekend availability . Travel internationally for project deployments and service support when required. Requirements Proven experience in an electrical field service engineering role. Strong knowledge of electrical systems, wiring, and diagnostic procedures. Ability to read and interpret technical drawings and schematics. Excellent problem-solving ability and attention to detail. Strong communication and interpersonal skills. Valid UK driving licence and passport. Willingness to work weekends and travel abroad at short notice. Desirable Experience with industrial equipment, electronics, or electro-mechanical systems. Electrical or electronic engineering qualifications (e.g., HNC, NVQ, or equivalent). Knowledge of networking or IT-based systems. What's Offered Competitive salary with overtime earnings. Company vehicle, equipment, and tools. Comprehensive training and professional development opportunities. Travel allowances and accommodation for international assignments. A supportive, innovative, and collaborative work environment.

Position: (phone number removed) Product design Engineer Location: Gaydon Position Type: Contract Inside IR35 Salary: 27.21 per hour umbrella inside IR35 About the company I am currently recruiting on behalf of a Luxury Automotive OEM based in Gaydon who are seeking a Computational Fluid Dynamics Engineer to join their team on a rolling contract basis working 40 hours per week Job Description Product Design Engineering focuses on designing and developing new or existing products, components, or assemblies including: Applying engineering principles to develop mechanical, electronic, or chemical products that meet customer technical/functional specifications as well as manufacturing cost/efficiency requirements Conducting mathematical modelling to determine if proposed designs are technically feasible Supporting and participating in the design, test, modification, fabrication, and assembly of prototypes May also be involved with designing product specific manufacturing production processes and equipment Level: A Senior Professional (P3) applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities typically include: Managing projects / processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. Why work through Contechs? Contechs is a leading Automotive, Design, Engineering, Technology and Innovation Recruitment Consultancy. Founded in 1997, with an inhouse Contractor Care Team to support all external employees, acts as an employment agency for permanent and contract recruitment. How to Apply If you're interested in applying for this position, submit your application and one of our recruiters will be in touch. If you know anyone that is suitable for the role, please visit the below page where we offer up to 600 referral fee: (url removed)> IF APPLICABLE (UK AND B2B ROLES) Applicants MUST have proof of immediate, on-going and valid eligibility to work full time in the UK and travel within the EU.

A Mechanical Engineer with a background involving production or manufacturing engineering will join the new production engineering team of an award-winning High-Tech company. Ideally qualified to Degree level, you'll be familiar with CAD tools, will have experience designing jigs, fixtures or mechanical test equipment and will benefit from exposure to electronic packaging or ruggedized product design. In this mid-level Mechanical Engineer role, reporting to the Production Engineering Manager, you will contribute to NPI projects within the production department and undertake a range of tasks such as: Supporting the transfer of products from R&D into engineering and manufacturing whilst ensuring mechanical designs are suitable for production through DFM/DFA reviews. Design and develop mechanical assembly fixtures, test jigs and tooling. Supporting Continuous improvement and manufacturing optimization. Providing hands-on engineering support when mechanical issues arise in production. Acting as mechanical interface between R&D, production, quality and operations. Your skills and experience should include: Degree or equivalent experience in Mechanical Engineering. Proven experience of working within a production / manufacturing engineering or mechanical design role. CAD skills such as SolidWorks or similar. Good understanding of mechanical manufacturing methods such as machining, sheet metal, injection moulding, assemblies. Previous experience of designing jigs, fixtures and/or tooling. Knowledge of DFM / DFA principles and lean manufacturing. Experience of supporting NPI from prototype through to volume manufacture. Of particular interest is experience relating to electronics packaging or ruggedized product design. Applicants must have full eligibility to work in the UK. Details of remuneration on application.

Hands-on R&D tech role supporting development of next-gen composite products & manufacturing technologies for aerospace applications. Work with engineers in a collaborative R&D environment, manufacturing & testing advanced composite structures using cutting-edge processes such as robotic winding, tri-axial braiding & High-Pressure Resin Transfer Moulding (RTM, filament winding, braiding). Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's "World's best companies 2024" ranking. Safran Electronics & Defense offers its customers onboard intelligence solutions allowing them to understand the environment, reduce mental load and guarantee a trajectory, even in critical situations, in all environments: on land, at sea, in the sky or space. The company harnesses the expertise of its 13,000 employees towards these three functions: observe, decide and guide, for the civil and military markets. What will your day-to-day responsibilities look like? Manufacture and assemble advanced composite components using filament winding, braiding, RTM, mechanical fastening and structural adhesives Plan, set up, execute and report on engineering test programmes to support R&D activities Design, build and adapt bespoke test enclosures, fixtures and rigs to enable safe, repeatable testing Conduct mechanical, impact, pressure, leak and environmental testing on composite components Apply and validate strain gauges and carry out material characterisation (e.g. fibre volume fraction, void content, Tg) Collaborate with engineers to develop and maintain test procedures, work instructions and best practices Operate, troubleshoot and maintain manufacturing and test equipment, ensuring compliance with safety, COSHH and 5S standards Proactively identify hazards and support a strong health, safety and housekeeping culture What will you bring to the role? Essential skills: Strong hands-on technical ability within a laboratory, test or manufacturing environment Experience operating industrial or engineering equipment, such as manufacturing systems or mechanical test rigs A logical, methodical approach to problem-solving with strong attention to detail Desirable skills: Experience working with composite materials and processes (e.g. RTM, filament winding, braiding) Exposure to mechanical, pressure or environmental testing and test data reporting Competence using Microsoft Word and Excel for documentation and data analysis A proactive mindset, comfortable working in a fast-paced R&D environment with a strong willingness to learn

AI-powered smart manufacturing for biotech industrial applications North Hertfordshire; £Competitive + Benefits Package This company is building a manufacturing 4.0 platform. Working alongside established partners, their automated manufacturing system will provide an innovative solution to deliver new pharmaceutical products. Key to this is the interchangeable, modular system that allows for bespoke delivery for manufacture. Due to the multiple parts of the platform, the company is hiring a Systems Development Integration Engineer to join their technical team. Working onsite at their dedicated offices and workspace, the Integration Engineer will play a pivotal role in bringing together hardware and software subsystems to integrate seamlessly. This will include extensive testing and experimental work for sub-systems, and be part of the development and verification of process standardisation. Requirements: Degree in Mechanical or Electronics Engineering / Physics with demonstrable industry experience integrating complex electromechanical systems. Proficiency with one or more of the following software languages: Python, C++ or C# (ideally for hardware focussed applications). Good technical problem-solving skills including the ability to communicate solutions and describe problems to peers. Excellent documentation skills including for technical analyses and processing results. Additional experience with: industrial network communication protocols, robotic hardware prototyping, CAD, embedded software, electronic design, and software virtualisation would be highly desirable. This is a multidisciplinary role, fitting a hybrid profile with key strengths and knowledge in several areas. Understanding how different components can work together is vitally important. The role would be fully onsite. On offer is a competitive salary depending on experience and a wide range of employee benefits (significant employer pension contributions, private medical insurance, life insurance and vehicle / travel schemes). No company sponsorship is available interested applicants must have full rights to work in the UK, and not be on restricted work visas. Another top job from ECM, the high-tech recruitment experts. Even if this job's not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV. Please apply (quoting ref: CV27523 ) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate.

Role: Project Manager - Engineering Location: Reading, Berkshire Sector: Aerospace / Defence Salary: £50,000 to £60,000 DOE Benefits: Bonus, 25 Days holiday, 15% Pension, Healthcare An opportunity for an experienced Project Manager has become available with a leading defence and aerospace technology business located in Reading, Berkshire.As the Project Manager, you will be responsible for planning and managing multiple projects at any given time, working closely with customers, engineers, suppliers, and all internal and external stakeholders.The successful Project Manager will have a proven background in engineering and manufacturing coming from a mechanical / electro-mechanical industry to work closely with a team of mechanical and electronics engineering professionals designing aerospace technology. Responsibilities: Work as part of a team to co-ordinate and manage multiple projects at any one time. Co-ordinate the project team, identifying priorities where necessary. Review and understand customer requirement specifications. Communicate and negotiate effectively to all key internal and external stake holders. Reporting on project progress, using KPI's. Identify, record and monitor ongoing project risk, and conduct risk management strategies. Use Microsoft Project and Microsoft Excel, to create a detail project plan based on customer requirements and in-line with contract regulations where applicable. Have a good understanding of international electrical and electronic design and testing specifications, including military standards and related specifications. Have an awareness of MTBF calculations and reliability prediction calculations. Have a good understanding of component obsolescence. Utilise project management skills to prepare, plan and track projects, when required. Prepare and submit technical reports, DRL's and other deliverable contractual documentation. Prepare documentation for qualification testing in line with customer requirements, including resource planning to support a testing programme. Skills and experience required: Project Management background in an engineering and/or manufacturing capacity Ability to read and understand 2D CAD drawings Understanding of mechanical and/or electro-mechanical systems Ability to work to tight deadlines. Strong analytical and problem-solving skills Excellent communication skills, specifically with clients, subcontractors & suppliers. Exceptional organisation skills and time management Aerospace and defence background desirable. Prince 2 or APM qualification desirable Please apply with your latest CV to be considered for this Project Manager role.

Administration, Purchasing & Inside Sales Coordinator Location : Macclesfield, Cheshire, SK10 2NZ Salary : £26,000 £29,000 per annum, DOE Contract : Full time, permanent Why Join Us Be part of a growing and innovative company where your contributions will truly make a difference. Work in a hands-on role that offers a variety of challenges. Join a friendly and supportive team with a shared commitment to quality and excellence. Competitive salary based on experience 25 days holiday, free parking and company pension scheme. Be Part of a Team Bringing Tomorrow s Electronics to Life! Are you looking for a role where no two days are the same Do you enjoy being at the centre of operations, supporting different teams, and keeping things running smoothly If so, this could be the perfect opportunity for you! Based at our headquarters in Macclesfield, Cheshire, we have a small multi-disciplined, dynamic team designing and manufacturing high-value robotic machines for testing PCBs (printed circuit boards). The majority of our sales are to China and the USA, where we operate our own small factories and employ local teams to provide high-quality customer support. RoBAT is firmly established as the leading company in this very specialised and niche marketplace. This is a unique opportunity to be part of a company at the forefront of industrial automation. We are looking for a driven and well-organised individual to support our Purchasing, Office and Stores operations. This is a varied role where you ll work closely with our financial, operational and engineering teams. You ll help manage stock, coordinate purchasing, support administrative activities across the company, and provide a key point of contact for both internal colleagues and external suppliers. Full training will be provided. This is an excellent opportunity for someone who enjoys a hands-on, fast-paced environment and wants to grow their skills within an established, supportive team. Key Responsibilities Purchasing & Supplier Coordination Manage requisitions and process purchase orders from quotation to delivery Liaise with suppliers and internal teams to resolve supply issues Coordinate domestic and international shipments (FedEx, UPS, DHL) Match delivery notes with purchase orders and record goods received in the ERP system Office Administration Provide administrative support across all departments, including senior leadership Act as the first point of contact for phone calls, visitors, and incoming mail Maintain office supplies, manage filing, scanning, and data entry tasks Update internal records including holiday schedules, absence logs, and fire roll call lists Stores & Inventory Management Oversee daily operations of the parts store Monitor stock levels, reorder supplies and organise inventory Conduct regular stock counts and maintain accurate ERP records Ensure a clean, safe, and well-organised stores environment In order to be successful in this role you must have: Highly organised, dependable, and detail-driven Self-motivated with strong initiative and follow-through Confident communicator, both written and verbal Proficient with computer systems including Microsoft Excel and ERP platforms Strong time-management skills with the ability to prioritise Comfortable managing multiple tasks at once Positive, collaborative, and eager to learn Strong problem-solving and critical-thinking abilities It would be great if you had: Experience in administrative, purchasing, or stores roles Exposure to stock control or logistics processes If you're passionate about mechanical fitting and assembly, thrive in a fast-paced environment, and want to contribute to the success of a cutting-edge company, we would love to hear from you! No agencies please. Click APPLY today and start your next career adventure with RoBAT Ltd.

Our client, a leading organisation within the defence and advanced engineering sector, is seeking a Mechanical Engineering Manager to lead a high-performing engineering team. This role offers the opportunity to work on complex, mission-critical programmes supporting UK and international customers. The Role As Mechanical Engineering Manager, you will be responsible for leading the mechanical engineering function within a defence-focused business unit. You will oversee the development and support of mechanical and electromechanical products across the full lifecycle, from concept and design through to manufacture and in-service support. This is a leadership role with responsibility for team capability, delivery performance and continuous improvement across multiple programmes. Key Responsibilities Lead, develop and manage the Mechanical Engineering team, ensuring strong performance and engagement Plan and manage engineering resources, including recruitment, training and workforce development Oversee engineering outputs, including designs, analysis, technical documentation and compliance activities Ensure delivery against programme requirements for schedule, cost and technical performance Drive continuous improvement across engineering processes, tools and standards Support wider business objectives and contribute to strategic engineering initiatives Essential Requirements Degree in Mechanical Engineering or equivalent experience Proven experience delivering mechanical or electromechanical systems within defence, aerospace or maritime environments Strong knowledge of mechanical design, analysis, manufacturing processes and engineering standards Experience leading engineering teams and developing technical capability Ability to review and approve engineering designs, drawings and analyses Strong communication, organisational and stakeholder management skills Desirable Skills Chartered Engineer status Experience with CAD/PLM tools such as CREO, Windchill or similar Knowledge of REACH/RoHS, FEA, CFD and manufacturing processes This is an opportunity to join a well-established organisation delivering advanced engineering solutions for critical applications. The role offers long-term career development and the chance to contribute to high-impact programmes within the defence sector.

Junior Field Service Engineer - Special Purpose Machinery £28,000 - £30,000 Basic Salary + Training + Van + Overtime x1.5 + 33 days holiday, Rugby Are you from an engineering background, looking to join an industry leading manufacturing company that will offer you excellent training and progression opportunities? This is a rare chance to join a leading international manufacturing company in a full time, permanent position with excellent career progression, training and long-term stability. You must be hard working, have a willingness to learn, have a full driving license and previous technical engineering knowledge, with the ability to use power tools. Once trained you will be field based, servicing, maintaining and repairing special purpose machinery, supporting their blue-chip customers around the UK. You will be provided with full training, but it would be useful to have a base knowledge and understanding of Electronics, Electrics, pneumatics and hydraulics. You will be required to travel UK Wide and occasionally to the US and Europe a couple of times a year - full expenses paid. This is a great opportunity to secure a role with excellent training, working on genuine world class, state of the art equipment in a field-based role with exceptional future progression and earning potential. The Role: Junior Service Engineer - Training Provided Carrying out routine servicing, maintenance, repairs and breakdowns on bespoke machinery UK wide travel and international travel occasionally Equipment commissioning The Candidate: UK Driving Licence Good Attitude, Hard Working and willing to learn Able to use power tools and has basic technical knowledge Willing to travel and stay away from home overnight on occasion Commutable to Rugby George Mallett - REF - 4803G elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Field service engineer, mobile engineer, maintenance engineer, multiskilled engineer, workshop engineer, service engineer, Compressor Engineer, mechanical Engineer, Facilities Engineer, CNC, Laser, Co2, Cutting machines, Fanuc, machinery, project Siemens, Coventry, Birmingham, Nottingham, East Midlands, Rugby

A Lead Test Engineer with a proven background in an Electronic Manufacturing environment will bring their commitment to quality and service, their ability to inspire a team and their hands-on skills to an award-winning Technology company offering a competitive salary package and career stability. The successful Lead Electronic Test Engineer will play a key role in ensuring the efficient production of a range of mission critical electronic and mechanical devices; undertaking troubleshooting and resolving issues, maintaining detailed documentation - adhering to quality and safety standards. The ideal Lead Electronic Test Engineer will bring: A formal Electronic Engineering qualification (HNC, HND, Degree or equivalent). Hands-on fault finding skills, SMT soldering skills and experience of working with a range of test equipment. Knowledge of electronic assembly techniques and a good understanding of manufacturing processes. Ability to read schematics. Familiarity with EMC standards. Experience of leading a small team of technicians. Strong communication skills. This role offers a competitive salary package with a discretionary bonus, Pension Scheme, Life Assurance, variable start/finish times, free snacks and more.

Maintenance Engineer Spider is advertising on behalf of an international specialist in Metal Injection Moulding (MIM) who are looking for a Maintenance Engineer to join their team in Rendlesham, Woodbridge on a full-time permanent basis! Fantastic company package include: Salary: A competitive salary of up to £40,000 - £45,000 per annum, depending on experience Holiday: 25 days plus Bank Holidays Hours: 35 hours a week full-time position and a 4-day week option. Company Pension Free Onsite Parking About the role: As a Maintenance Engineer, you will be responsible for maintaining all elements of the manufacturing site, with a strong electrical/electronic bias. You will support both the Maintenance and Production teams, ensuring equipment reliability and maximum uptime through reactive and preventative maintenance. This is a full-time position of 35 hours per week, with flexible working options including a 4-day week. Main Duties and Responsibilities: Maintenance & Repairs: Provide reactive and preventative maintenance to ensure equipment reliability and uptime, including diagnosing and resolving electrical, electronic, and mechanical faults across site equipment. Compliance & Safety: Support compliance activities and ensure all work is carried out in line with health and safety legislation and company policies. Continuous Improvement & Teamwork: Contribute to ongoing improvements within the business while working closely with Maintenance and Production teams and maintaining strong relationships with key stakeholders. Supplier & Site Support: Liaise and plan with suppliers, contractors and production teams as required, and carry out general site maintenance tasks, including minor repairs, painting, and basic upkeep. About you: As the new Maintenance Engineer, you will have at least 3 years experience in a manufacturing maintenance environment, with strong electrical and electronic fault-finding skills. You will have hands on experience with hydraulic and pneumatic systems, industrial furnaces (including vacuum furnaces), vacuum systems, and pumps, and be confident reading and interpreting technical drawings and schematics. You will hold a minimum HNC (or equivalent) in Electrical/Electronic Engineering or have extensive relevant experience. Ideally, you will also have experience with injection moulding, industrial equipment such as pumps, mixers, or chillers, automation or robotics, and knowledge of PLC or control systems. A forklift licence ( You are a practical, hands-on individual, able to work independently and as part of a small team, managing multiple priorities and problem-solving effectively in a fast-paced environment. About them: This company is a well-established manufacturing business known for delivering high-quality components across a range of advanced industries. With a strong focus on continuous improvement and operational excellence, this is an opportunity to join a collaborative team where your contribution is valued, and you can develop both professionally and personally within a supportive environment. If you have the relevant skills for the Maintenance Engineer role, please send your CV through for consideration. We look forward to hearing from you. Please check your email inbox and spam / junk mail folder for any email correspondence for this role. If you require any reasonable adjustments such as access or information in an alternative format, please inform us soon as you are able so that we can make the appropriate adjustments. This vacancy is being advertised and handled through Spider, the region s Online Job Advertiser. We take your privacy seriously. When you apply, your details are processed and available for us to directly review for this vacancy. As you might expect you may be contacted by email, text, or telephone. For full Privacy Policy details please see email correspondences on receipt of your application.

Electrical Maintenance Engineer Location: North Oxfordshire Salary: £37,000 £44,000 per annum Hours: Days initially, moving to rotating AM / PM shifts (no nights) Our client is a well-established global manufacturing organisation operating across multiple international sites. They are a recognised leader within their sector and are looking to add an Electrical Maintenance Engineer to support their growing UK operation. This role offers long-term stability, exposure to modern manufacturing and automation equipment, and the opportunity to work within a safety-focused, high-volume production environment. Responsibilities Electrical Maintenance Engineer Respond to day-to-day electrical and mechanical maintenance issues and machinery breakdowns Diagnose, fault-find, and repair production machinery, robotics, automated systems, and plant equipment Carry out preventative maintenance with a focus on electrical systems, control panels, drives, and motors Support PLCs, sensors, and other control systems to maintain production uptime Work closely with production teams to maximise equipment efficiency and reliability Maintain accurate maintenance records and electrical documentation Liaise with external contractors and suppliers for specialist electrical support Manage electrical spare parts, consumables, and stock levels Support continuous improvement initiatives to reduce downtime and improve system reliability Ensure statutory inspections, testing, and electrical compliance requirements are met Assist with planning maintenance coverage across machinery, automation systems, and ancillary equipment Qualifications / Experience Electrical Maintenance Engineer Time-served engineer with hands-on experience in a manufacturing environment Strong electrical background with proven fault-finding and problem-solving skills Experience with PLCs, control panels, motors, drives, or robotics highly desirable Mechanical experience advantageous but not essential Electrical or Mechanical engineering qualification preferred Good understanding of Health & Safety and safe systems of work Organised, proactive, and able to work under pressure Confident communicator able to engage at all levels of the business Benefits Electrical Maintenance Engineer Competitive salary £37,000 £44,000 Company pension scheme Life assurance Additional leave entitlement On-site facilities and free parking Cycle to work scheme Employee discount schemes Training and development opportunities For further details, please contact Kieren Provis on (url removed) We are an employment agency specialising in opportunities within the Engineering, Manufacturing, Automotive, Electronics, Defence, and Scientific sectors. Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

A Project Manager with proven experience of project delivery within an Engineering or Manufacturing Company, with a focus on end-to-end product development, will join a thriving, award-winning Technology Company. With a broad technical awareness across Electronics, Software and Mechanical applications, the successful Project Manager will bring strong people skills as well as the ability to deliver concurrent projects of varying length. This rewarding hybrid role will suit a mid- level Project Manager with 3-5 years' experience, where you have been involved with projects from concept to product realization in an engineering environment; overseeing costings whilst maintaining close contact with customers and suppliers. Key Requirements for the Project Manager include: Project Management within an Engineering, R&D or Manufacturing environment. Technical understanding across Electronics/RF, Software and Mechanical Engineering. Experience managing end-to-end product development lifecycles. Experience managing costings for bids and sales support. Strong people skills and collaborative approach. A generous salary will be offered with hybrid working (3 days office / 2 WFH) plus numerous benefits.

Electrically Biased Maintenance Engineer East Manchester area £36-£50K plus Overtime plus Benefits 39 hours/week Mon-Fri , 07:00 - 16:00 (Midday Finish on Friday) Are you an experienced Electrical Maintenance Engineer looking for a well paid days based, Monday-Friday days position with a large manufacturing company?The role would suit someone who prefers to move away from shifts and enjoys the job security of working for a large and profitable manufacturer who are investing heavily into the site. Additional earnings can be achieved via overtime and call outs. The role is to work as part of a team diagnose and provide fault finding on electrical machinery in a fast paced, high volume manufacturing environment. The Role Days based, permanent Electrically biased maintenance role on a large manufacturing facility. Planned maintenance, breakdowns, fault finding and some installation work to plant equipment and machinery. A small amount of mechanical fault finding and working on electronic equipment. The Person Electrical Engineering qualification (HND, City & Guilds, HNC, apprentice trained) Working experience in a Maintenance Engineer position including PLC fault finding Good understanding of manufacturing health and safety standards Reference Number: BBBH271814To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nick Smith at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.