125 jobs found

Industrial Wet Painter We are seeking an experienced Industrial Wet Painter to join our client's team in a fast-paced production environment. This role involves applying high-quality industrial paint finishes to a diverse range of products, from small valves through to 40 containers . You will be required to work both independently and as part of a team while maintaining strict quality and safety standards. Key Responsibilities & Duties Prepare components for painting, including cleaning, masking, and general surface preparation Mix paints accurately to the ratios specified in technical data sheets Apply industrial coatings in accordance with job specifications and quality requirements Operate a range of spray equipment, including airless, air-assisted, and conventional spray guns Inspect finished work to ensure compliance with coating specifications Complete all required job documentation and paint reports Work alongside in-house NACE inspectors during inspection and quality control processes Safely operate cranes to move and position components (license desirable but not essential) Maintain a clean, safe, and organised work area Rotate between painting booths and areas as required by production demands Follow all health, safety, and company procedures at all times Skills & Experience Proven experience in industrial wet painting or a similar coatings role Good understanding of surface preparation, paint mixing, and application techniques Ability to read and follow technical data sheets and job specifications Strong attention to detail and commitment to producing high-quality finishes Experience using cranes (advantageous but not mandatory) Reliable, safety-focused, and able to work in a fast-paced environment What We Offer Stable, ongoing work within a well-established business A variety of projects across multiple painting areas Supportive team environment Opportunities for training and skill development If you take pride in your workmanship and enjoy working in a hands-on industrial environment, we would welcome your application.

Location: Clitheroe Hourly rate: 15.88ph - 16.25ph Full-time: 6am to 2pm and 1:45pm to 9:45pm (rotating shifts) Our global client based in Clitheroe are looking for Inspectors to join their team on a full time basis on rotating weekly shifts. If you thrive in a fast-paced environment and have a keen eye for detail, this could be the perfect opportunity for you. If you have worked in a warehouse, production, retail environment before, this could be the ideal opportunity for you. Following the completion of the inspection targets, you may also receive training to run the production equipment. Here's a taste of what you'll be doing as a Quality Inspector: Match batch components to planned work orders. Conduct safety checks and maintain a clean and safe working environment. Complete all required paperwork, including the process logbook and product identification labels. Brief colleagues when handing over the machine, including schedule updates, ongoing QC checks, Collaborate with the Team Leader, Shift Leader, and Quality department to solve batch and valve-related problems. Check cannisters for slight defaults in them and then remove so they do not go out to the client Adhere to all site regulations and company safe working practises and procedures. Be available to work rotating weekly shifts of 6am to 2pm and 1:45pm to 9:45pm. We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

Job Title: CMM Inspector Location: Titchfield, Hampshire Job Type: Permanent Due to the nature of the work, applicants must have the right to work in the UK and meet ITAR compliance requirements. Who we are & what's on offer We've teamed up with a major name in aerospace engineering, a global innovator pushing the limits of flight. They're looking for a skilled CMM Inspector who knows precision, quality, and performance inside out. You'll be part of a team that keeps aerospace components performing flawlessly measuring, checking, and perfecting the details that keep aircraft in the sky. Join a business where quality isn't just a department - it's the standard. How you'll contribute As a CMM Inspector , you'll play a vital role in ensuring every component meets exacting aerospace standards. You'll use your technical know-how and problem-solving mindset to keep production moving and quality unshakable. Key responsibilities: Inspect and measure aerospace components to technical drawings, GD&T, and purchase order specs Program and operate CMMs and precision inspection equipment for accurate, reliable results Lead First Article Inspections and monitor SPC data to maintain production integrity Support across inspection areas, adapting quickly to priorities and assisting with non-conformance investigations Drive continuous improvement, collaborating with teams to raise standards and boost efficiency Sign off inspected items using your approved stamp, your expertise ensures only the best leaves the site What you'll bring Strong experience interpreting complex engineering drawings and GD&T specifications Hands-on skill with CMM programming and operation A solid understanding of inspection systems, quality processes, and continuous improvement A proactive, problem-solving mindset - detail-focused but always moving forward What's in it for you Work with a world leader in aerospace technology Join a safety-first, quality-driven culture that values your expertise Real opportunities for growth, learning, and making an impact on the future of flight Ready to raise the standard? If you've got the precision, passion, and mindset to keep aerospace quality at altitude, we want to hear from you. Apply now and join a team shaping the next generation of flight.

Personnel Selection are assisting with the recruitment of a day shift Final Quality Inspector / Masting Operative. This is a permanent role working 37 hours per week Monday to Thursday 07:00 to 16:45. Fridays, Saturdays and Sundays off, giving you a long weekend. Our client is an established family owned company based within Andover Hampshire UK. JOB FUNCTION This job will involve ensuring products meet quality standards before reaching the customer, interpreting technical drawings, and carrying out final inspections in line with specifications and safety requirements. This is a great opportunity for someone with strong attention to detail who enjoys working in a manufacturing environment and takes pride in delivering high-quality work. KEY RESPONSIBILITIES Complete given jobs within the required specification. Reading and interpret product drawings. Delivery of product to down stream customer that meets Quality, Cost and Delivery requirements and does so within established safety parameters and with a "right first time" ethic. Utilise cross skilling to ensure operational flexibility to respond to changing business needs / new opportunities. Work to current "best practise" to our current Works Instructions. Work flexibly within a team environment to ensure the required Quality, Cost and Delivery are achieved. Assume personal responsibility for Health and Safety at Work. Wear all required Personnel Protective Equipment (PPE) in line with the Safe Systems of Work. Maintain housekeeping to the established standards. Comply with manual handling recommendations when required. CRITERIA AND SKILLS REQUIRED TO BE CONSIDERED: Loyal history of working within manufacturing or engineering backgrounds. Ability to plan, prioritise, and organise workloads. Previous experience of working from technical drawings and diagrams including being able to extract information. Proven background in maintaining high quality standards. Experience of polishing and ensuring product is maintained at a highly smart and presentable standard using air tools. Able to work to fine tolerances. Competency in working with hand tools and working at height is essential. Use of platform ladders on a regular basis. Ability to plan, prioritise and organise workloads. Capable of interpreting and reporting data. Working from a technical drawing- Competent in working to and extracting information from a technical drawing. Pro-actively participate in Continuous Improvement. Communication skills with the ability to interact at all levels and with different departments. Leads by example. Calm & effective under pressure. Actively seek opportunities to improve processes and services. In return, our client offers a fantastic benefits package to successful candidates, to include: Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits. 25 days holiday, plus bank holidays. Holiday scheme to buy extra days' annual leave. Pension Scheme. Matched contribution/salary sacrifice. SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more. Life Assurance Scheme. Long Service award scheme, with holiday benefit. Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more. Employee Assistance Programme. A workplace initiative to support and enhance well-being. Enhanced maternity and paternity provision. PLEASE NOTE OUR CLIENT DOES NOT SPONSOR VISAS - YOU WILL ALREADY HOLD THE RIGHT TO WORK WITHIN THE UK

Quality Engineer - Manufacturing An established and growing manufacturing business is looking to appoint a Quality Engineer to join its team at its Harlow HQ. This is an excellent opportunity to play a key role in quality improvement, supporting cross-functional teams and helping to drive a right-first-time culture across products and processes. The Role You will support quality monitoring, investigation, and continuous improvement activities, helping to reduce waste and improve overall product and process performance. Key responsibilities include: Supporting the handling of warranty claims and customer-reported quality issues Assisting with customer investigations, including root cause analysis and corrective actions Supporting the development and maintenance of the Quality Management System (QMS) Participating in inspection activities including Tool Proof Samples, First Product Runs and Pre-Shipment Inspections Supporting new product introduction through quality planning, risk assessment and DFMEA activities Defining and maintaining inspection standards, sampling plans and quality controls Analysing scrap, rework and non-conformance trends to identify improvement opportunities Providing day-to-day quality support across assembly, warehouse and production operations Raising and managing Supplier Corrective Action Reports (SCARs) Supporting continuous improvement initiatives across products, processes and suppliers Reading and interpreting engineering drawings, specifications and technical standards The Ideal Candidate The ideal candidate will have experience within a manufacturing environment and a strong understanding of quality processes and continuous improvement methodologies. You will ideally have: Experience in a Quality Engineer, Quality Inspector, Production Engineer or similar role Background in a mechanical, electrical or manufacturing environment Experience supporting new product introduction and product development activities Ability to read and interpret engineering drawings and technical standards Experience using manual inspection methods and measurement equipment Knowledge of root cause analysis and corrective action processes Familiarity with quality tools such as FMEA, SPC, Pareto analysis and control plans Strong communication skills with the ability to work cross-functionally High attention to detail and ability to manage priorities in a fast-paced environment The Opportunity Hybrid-based role in Harlow Opportunity to join a growing and forward-thinking manufacturing business Involvement in continuous improvement and new product development initiatives Supportive team environment with opportunities for development Long-term career progression within a quality-focused organisation About Us Zero Surplus is one of the UK's premier recruitment agencies, based just outside Cambridge. Our recruiters source staff for small and international businesses across the South of England. For registration purposes, please let us know where you are currently based or which locations you are considering, as well as your required salary and notice period. Please upload a Microsoft Word version of your CV where possible, excluding text boxes or images. Any data we collect

Quality Control Inspector Competitive + Benefits + bonus Welwyn Garden City Monday - Friday 2pm-10pm gap technical are proud to be representing this manufacturing business in their search for a QC Inspector to work at their facility based near Welwyn Garden City Performance Objectives Read and interpret engineering drawings, specifications and technical sheets. Carry out dimensional inspection of aerospace components. Proficient in the use of handheld measuring devices including callipers, gauges, micrometres etc. Work to set daily targets. Record non-conformances in a descriptive manner. Signing C of C (training provided) Completing first off and final inspection Person Specification A minimum of 3 years' experience in an aerospace inspection environment Able to read and interpret engineering drawings & specifications. Use of handheld measuring equipment Ability to work both independently and as part of a team. Knowledge of inspection processes and methodologies Knowledge of CMM Experience of AS9102 First Article Inspection Reports Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date:24/4/2026 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."

Flexible working hours, 33 Holidays, Frequent Work Events/Socials and State-of-the-Art Facilities are just a few of the benefits that the Quality Inspector will enjoy whilst working with this impressive engineering organisation. Established over 100 years ago, this highly impressive engineering organisation has become a vital partner to their high-profile clientele click apply for full job details

Metal Polisher required for a manufacturer based in Wood Green. The successful candidate will have experience polishing Brass Metal although experience with other metals will be considered. Metal Polisher Position Overview Polishing & Finishing: Polish and buff metal components of taps and showers to achieve a smooth, shiny, and defect-free surface using hand tools, power tools, and polishing machines. Surface Preparation: Prepare metal surfaces for finishing processes, including sanding, grinding, and cleaning, to ensure optimal adhesion of coatings or plating. Quality Control: Inspect finished products for imperfections, such as scratches, dents, or uneven finishes, and make necessary adjustments to meet quality standards. Tool Maintenance: Maintain polishing equipment and tools, ensuring they are in good working condition and replaced or repaired as needed. Safety Compliance: Follow all safety procedures and wear appropriate personal protective equipment (PPE) to ensure a safe working environment. Collaboration: Work closely with other team members, including machinists, assemblers, and quality inspectors, to ensure seamless production flow and high-quality output. Documentation: Record and report any issues or inconsistencies in the polishing process and suggest improvements to enhance quality and efficiency. Metal Polisher Position Requirements Proven experience as a Metal Polisher, preferably in a manufacturing environment. Knowledge of various polishing techniques and equipment. Familiarity with working with metals such as brass, stainless steel, and chrome. Excellent attention to detail and a strong commitment to producing high-quality work. Ability to read and interpret technical drawings and specifications. Good hand-eye coordination and manual dexterity. Strong understanding of safety practices in a manufacturing setting. Ability to work independently and as part of a team. Metal Polisher Position Remuneration Wage dependent on experience Likely 12p/h- 15p/h 09:00-17:00 Monday-Thursday 09:00-16:00 Friday Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Our client, a leading manufacturer in the marine components sector, is seeking a meticulous Inspector for a contract position at their machine shop. The role will be focused on the late shift and involves ensuring the highest quality standards through rigorous inspection processes. Key Responsibilities: Inspecting components at all stages of production, including final inspection, using calipers, micrometers, thread gauges, and various hand tools. Performing CMM programming and inspections using LK and Mitutoyo CMMs, if trained. Raising non-conformance reports and supporting root cause analysis. Reading and interpreting technical drawings, purchase orders, and concessions. Releasing inspected parts to stores, assembly, and packaging areas, ensuring traceability for MDR Quality Packs & Class Visits. Ensuring compliance with engineering specifications and supporting continuous improvement initiatives. Labelling and storing products accurately, updating inventory in the system. Collaborating across operations teams to achieve OTIF (On Time In Full) targets. Maintaining a safe working environment and high housekeeping standards. Requirements / Qualifications: Experience in mechanical or electrical component inspection using dimensional hand tools. Proficiency with LK and Mitutoyo CMMs. Knowledge of FDA, GMP, ISO 13485 standards. Ability to read and understand technical drawings. Mechanical/assembly aptitude with experience in a production or engineering environment. Understanding of health & safety procedures. Strong communication and team collaboration skills. Flexibility to work across logistics and operations teams. College standard education, mechanical apprenticeship, or equivalent experience. Proficiency in Microsoft Office and MRP/SAP systems. Core Skills & Competencies: Quality control inspection and measurement Problem-solving and root cause analysis Process compliance and continuous improvement Safety awareness and housekeeping CMM expertise: LK and Mitutoyo If you are a detail-oriented Inspector with significant experience in the manufacturing sector, we encourage you to apply now. Join our client's dynamic team and contribute to maintaining top-notch quality standards in the production of marine components.

Mechanical Inspector Location: Basildon, Essex Salary: 37,600 Hours: Monday to Thursday 07:00 to 16:00, Friday 07:30 to 12.30 About the Role We are recruiting for a Mechanical Inspector to join a leading international engineering and manufacturing company based in Basildon. This is an excellent opportunity for a skilled Mechanical Inspector, Quality Inspector, or CMM Inspector with an aerospace or precision engineering background to take the next step in their career. You will work within a modern, high-spec facility supplying precision components to the aerospace industry, ensuring all parts meet strict quality standards and supporting a Right First Time production philosophy. What's on Offer Monday to Thursday 07:00 to 16:00, Friday 07:30 to 12.30 Overtime paid at enhanced rates 25 days holiday plus bank holidays Death in service benefit (2x annual salary) Company pension scheme Employee Assistance Programme (EAP) Free on-site parking Key Responsibilities Carry out mechanical inspection of aerospace components at all stages of manufacture Conduct First Article Inspection ( FAI ) and manage non-conformance reports (NCRs) Support and maintain the Quality Management System (QMS) and perform internal audits Use precision inspection tools including verniers, micrometers, bore micrometers, height gauges, and DTIs Identify recurring quality issues and recommend corrective and preventive actions Conduct root cause analysis (5Y, 8D, SPC) and drive continuous improvement initiatives Support New Product Introduction (NPI) using FMEA, APQP, and PPAP methodologies Manage calibration control for all measurement instruments Collaborate with cross-functional teams to enhance quality and efficiency Skills & Experience Time-served Mechanical or Quality Inspector from an engineering or aerospace environment Strong ability to interpret engineering drawings and specifications Experience with ISO 9001 / AS9100 quality systems and internal auditing Background in precision machining, fabrication, or surface treatments Knowledge of NADCAP processes desirable Experience using Lean Manufacturing tools such as Kaizen, 5S, and Continuous Improvement CMM experience advantageous but not essential Excellent attention to detail and ability to work independently If you are a Mechanical Inspector or Quality Engineer looking for a rewarding role within a respected aerospace manufacturer, apply now or call Appointments to find out more. Due to the nature of the business candidates must be a BRITISH CITIZEN to apply for this role

Quality Inspector - E ngineering About the Role A1 Personnel is partnering with their client who seeking a detail-oriented Quality Inspector to support and maintain high-quality standards across all operations. This role is central to ensuring compliance, accuracy, and continuous improvement within the business. The successful candidate will play a key role in the standards room, overseeing inspection processes, managing quality systems, and ensuring all products meet required specifications. Key Responsibilities Support the smooth running of the standards room and quality processes Program and operate CNC CMM equipment using PC-DMIS software Generate quality reports and documentation for completed jobs Approve and sign off quality plans and related activities Manage calibration and maintenance of all quality equipment Maintain and enforce quality policies and procedures Conduct internal audits of processes and systems Raise and manage internal and external NCRs, supporting 8D problem solving Maintain high standards of cleanliness and organisation in the standards room Communicate any quality issues or risks to the management team Support other departments as required Ensure compliance with health, safety, environmental, and quality standards Requirements Essential: Minimum 3 years' experience in a Quality Inspector or similar role ONC/HNC in Production Engineering or equivalent Strong experience with CMM programming and PC-DMIS software Good knowledge of ISO 9001 and AS9100 standards (nuclear standards advantageous) and AS9100 standards (nuclear standards advantageous) Proficient in Microsoft Office (Word, Excel, Outlook) Ability to work under pressure and meet deadlines Able to work independently and complete tasks to a high standard Desirable: Internal or Lead Auditor qualification Additional Information Must be reliable with good timekeeping Strong communication skills, both written and verbal How to Apply Please submit your application to be considered for this opportunity.

Quality Inspector - Bristol - Permanent - Aerospace Manufacturing Shorterm Group are supporting a rapidly expanding engineering business in Bristol who specialise in the manufacture of high-precision aerospace components. We are looking for an experienced Quality Inspector to join their team on a shift basis, ensuring the highest levels of product conformance and supporting the machining teams on the shop floor.The Role:As a Quality Inspector, you'll play a vital part in preventing non-conforming product from reaching customers. You will be responsible for:- Accurate measurement and validation of aerospace components- First-off, in-process and final inspection activities- Selecting appropriate measurement strategies based on tolerance requirements- Programming and operating Aberlink CNC CMMs- Using optical measurement tools (Keyence, shaft scanner etc.)- Completing PPAP/FAIR reports and digital inspection documentation- Supporting calibration activities and maintaining traceability to national standards- Raising NCRs and contributing to root cause and corrective actions- Maintaining high standards in a 9100-compliant environmentWhat You'll Need- Strong background using manual and CNC measurement tools- Ability to read and interpret engineering drawings- Experience inspecting aerospace components to tight tolerances- Aberlink programming experience (advantageous)- Good understanding of AS/EN/JISQ 9100 QMS- Confident using Microsoft Office 365- Proactive, motivated, and a strong team player with a can-do attitudeWhy Apply?- Join a rapidly growing engineering business- Work with advanced inspection equipment and high-complexity parts- Opportunities to develop and influence process improvements- Supportive environment where quality and continuous improvement are at the forefrontInterested in finding out more?Contact Max Fairclough at Shorterm Group for a confidential chat and full job details.

Junior Quality Inspector (Precision Manufacturing) £28,500 - £32,500 + Optional Overtime + Birthday Off + Progression + Training + Benefits Wolverhampton Are you a Junior Quality Inspector with experience in a manufacturing environment, looking to join a business where quality and precision are central to production? Do you enjoy hands-on inspection work, using a range of measuring equipment like micrometres and gauges, and working closely with production teams to ensure products meet strict specifications and standards? The company are an established manufacturer specialising in aluminium extrusion products, supplying high-quality components into demanding industries. Known for their commitment to quality, continuous improvement and team collaboration, they are looking to strengthen their inspection team to support ongoing production. This is an excellent opportunity for a Quality Inspector who enjoys a detail-focused role, working across visual and dimensional inspection, with exposure to a variety of measuring equipment and quality processes. The Role: Week 1: Monday - Thursday 6am - 2pm Friday: 6am - 12pm Week 2: Monday - Thursday 2pm - 10pm Friday: 12pm - 6pm Conduct goods out inspections Support other members of the quality team and production teams Utilise various measuring equipment like micrometers, verniers, and gauges The Person: 1 - 2 years working as a Quality Inspector within a manufacturing environment Confident using measuring equipment such as micrometers, verniers and gauges Job Reference: BBBH24527 Key words: Quality, Inspector, Engineer, Manufacturing, Precision Engineering, ISO:9001, ISO:45001, Micrometers, Verniers, Gauges, Wolverhampton, Birmingham, West Midlands We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.

Source Inspector - Nottingham Area In response to a number of escapes, the customer wishes to implement an independent inspection, with the following being required: Visually inspect castings at the customer facility, focusing on specific set of part numbers as provided by the customer. Inspect each part based upon a defined set of characteristics Document all inspection activity via a Customer-provided Inspection Record. Document any non-conformities and raise them to an appropriate customer point of contact. Provide bi-weekly detailed report on inspection findings. Required skills and experience: Minimum of 3-years previous experience within an aerospace / defence manufacturing environment, specifically within inspection-based roles Hands-on visual inspection experience, including the use of magnifiers and other inspection aids. Experience of castings is highly advantageous. Proficiency with mechanical inspection equipment (should dimensional verification be required) Knowledge of containment processes and procedures Strong communications skills, both written and verbal. Ability to prioritise workload to meet business needs. The role is inside IR35.

Quality Inspector (4 Day Working Week) Chorley £30,000 - £35,000 + Flexible 38 Hour Working Week + 4-Day Working Week + Career Progression Are you an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a well-established Precision Engineering company, with the opportunity of in-house training and a well as a flexible 38-hour working week spanning Monday to Thursday? Do you want the chance to work in a role within a Precision Engineering company with a distinguished reputation spanning 50 years, with a flexible 38-hour working week spanning from Monday to Thursday, in-house training in the company's expertise and career progression opportunities. On offer is the opportunity to be part of a business established since the 1970's, working in the automobile, scientific, nuclear, and food industries, manufacturing precision engineered components, with an unmatched reputation, who value and champion their employees through in-house training and flexible working hours. In this role you will be inspecting precision components from the beginning to the end of the manufacturing process, interpreting technical drawings, using handheld measuring equipment, as well as working and coordinating a CMM measuring machine. This role would suit an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a long-standing company, with the added benefit of in-house training and a flexible 38-hour working week spanning Monday to Thursday. The Role: Inspecting Manufactured Products from beginning to end Operating a Manual CMM Machine 38-Hour Working Week across Monday to Thursday The Person Inspector from a manufacturing background Ability to interpret technical drawings of products prior to their manufacture Commutable distance to Chorley BBBH19184EZ Key Words: Inspector, Engineering, Engineering Inspector, Manufacturing Inspector, Manufacturing, Quality Engineer, Precision Components, Technical Drawings, 4 Day Working Week, Training, Chorley, Preston, Bolton If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Overview W Talent Manufacturing and Engineering are supporting a market leading Manufacturing company based in Bristol to find a EHS Manager. This business is dedicated to delivering high-quality products to various industries and have seen significant growth so far this year. The EHS Manager will join the site senior leadership team and be imperative on supporting all functions of the organisation on the commitment to a business wide drive to develop a more robust cultural behavioural safety initiative. Our customer is committed to Safety and this role is pivotal in continuing their exciting safety journey at their Flag ship state of the art manufacturing site in Bristol. Job Role W Talent Manufacturing and Engineering are seeking an experienced and highly skilled EHS Manager to lead a small team and drive a successful behavioural change programme. This role is working on site in a heavy industrial high hazard environment based in Bristol. The role requires a highly qualified EHS Leader with a proven track record in supporting a Manufacturing organisation in technical and strategic safety improvements and support the business on prioritising work flow to gain the best result across the whole facility Key Responsibilities Health and Safety Strategy: Develop and implement a health and safety strategy that aligns with the company's goals and objectives, ensuring a proactive and prevention-based approach. Regulatory Compliance: Act as the point of contact for the HSE Inspectors, facilitating site inspections and reviews. Stay up-to-date with relevant health and safety legislation, regulations, and standards, and ensure the facility's compliance with all relevant laws. Risk Assessment: Conduct and review risk assessments, including hazard identification and process safety assessments, to mitigate potential health and safety risks. Training and Education: Create and deliver health and safety training programs for employees, contractors, and visitors, ensuring a culture of safety awareness and competence. Incident Investigation: Lead investigations of workplace incidents, accidents, and near misses, and implement corrective and preventive actions to avoid future recurrences. Health and Safety Reporting: Prepare regular health and safety reports for senior management and regulatory authorities, providing insights and recommendations. Audits and Inspections: Conduct regular audits and inspections to assess compliance, identify areas for improvement, and track progress. Safety Culture: Foster a strong safety culture by promoting employee engagement, feedback, and participation in safety initiatives. Environmental Compliance: Maintain the ISO 14001 management system, working with site teams to ensure compliance with environmental regulations and sustainability goals. Qualifications and Person specification NEBOSH Diploma or equivalent - minimum expectation Proven experience working as part of a Senior Leadership team A background in a Heavy or Process Industry is highly advantageous Lead Auditor would be advantageous Knowledge of High Hazard regulations and compliance such as DSEAR. ATEX or COMAH is preferred Significant experience in management, engaging with the full work force Strong problem-solving abilities, with a proactive and solutions-oriented approach Strong communication and stakeholder engagement What's on Offer up to 70,000 plus benefits To be truly accountable for the safety change within a forward thinking business

We're recruiting on behalf of an established engineering/manufacturing client who are looking to hire a Mechanical Inspector to join their Quality team, reporting to the QA Manager. This role is responsible for ensuring mechanical components, sub-assemblies and finished items meet engineering, quality and compliance requirements, supporting production continuity and customer expectations. Mechanical Inspector - Key responsibilities - Quality, Inspection, Manufacturing, Engineering Inspect incoming components against drawings, specifications and purchase order requirements Carry out in-process and final inspections of mechanical parts and assemblies Identify, document and raise non-conformances in line with QMS procedures Support root cause analysis and corrective actions where required Interpret engineering drawings, tolerances and technical specifications Complete dimensional inspection using manual measuring tools and CMM (where applicable) Maintain calibration status and traceability of inspection equipment Record inspection results and quality data accurately in the ERP system Support goods-in and goods-out checks during busy periods Maintain housekeeping standards and follow safety/compliance requirements Mechanical Inspector - Experience - Quality, Inspection, Manufacturing, Engineering Mechanical engineering background or strong practical inspection experience Confident reading and interpreting mechanical engineering drawings Mechanical inspection or quality assurance experience ERP experience and good MS Office skills Strong attention to detail and a methodical approach Mechanical Inspector, Quality, Inspection, Manufacturing, Engineering If you're interested, apply today and we'll share full details of the client and next steps.

Personnel Selection are assisting with the recruitment of a night shift Final Quality Inspector / Masting Operative. This is a permanent role working 37 hours per week Monday to Thursday 21:00 to 06:45. Fridays, Saturdays and Sundays off, giving you a long weekend. Our client is an established family owned company based within Andover Hampshire UK. JOB FUNCTION This job will involve ensuring products meet quality standards before reaching the customer, interpreting technical drawings, and carrying out final inspections in line with specifications and safety requirements. This is a great opportunity for someone with strong attention to detail who enjoys working in a manufacturing environment and takes pride in delivering high-quality work. KEY RESPONSIBILITIES Complete given jobs within the required specification. Reading and interpret product drawings. Delivery of product to down stream customer that meets Quality, Cost and Delivery requirements and does so within established safety parameters and with a "right first time" ethic. Utilise cross skilling to ensure operational flexibility to respond to changing business needs / new opportunities. Work to current "best practise" to our current Works Instructions. Work flexibly within a team environment to ensure the required Quality, Cost and Delivery are achieved. Assume personal responsibility for Health and Safety at Work. Wear all required Personnel Protective Equipment (PPE) in line with the Safe Systems of Work. Maintain housekeeping to the established standards. Comply with manual handling recommendations when required. CRITERIA AND SKILLS REQUIRED TO BE CONSIDERED: Loyal history of working within manufacturing or engineering backgrounds. Ability to plan, prioritise, and organise workloads. Previous experience of working from technical drawings and diagrams including being able to extract information. Proven background in maintaining high quality standards. Experience of polishing and ensuring product is maintained at a highly smart and presentable standard using air tools. Able to work to fine tolerances. Competency in working with hand tools and working at height is essential. Use of platform ladders on a regular basis. Ability to plan, prioritise and organise workloads. Capable of interpreting and reporting data. Working from a technical drawing- Competent in working to and extracting information from a technical drawing. Pro-actively participate in Continuous Improvement. Communication skills with the ability to interact at all levels and with different departments. Leads by example. Calm & effective under pressure. Actively seek opportunities to improve processes and services. In return, our client offers a fantastic benefits package to successful candidates, to include: Profit Share Bonus Scheme, paid to all employees every quarter. Based on Group Company profits. 25 days holiday, plus bank holidays. Holiday scheme to buy extra days' annual leave. Pension Scheme. Matched contribution/salary sacrifice. SimplyHealth Cash Plan. Allows you to claim towards health costs. For example, dental, optical, physiotherapy, chiropody treatments and more. Life Assurance Scheme. Long Service award scheme, with holiday benefit. Company Benefits Discount Rewards Scheme. Includes shop discounts, hotel discounts, days out, and more. Employee Assistance Programme. A workplace initiative to support and enhance well-being. Enhanced maternity and paternity provision. PLEASE NOTE OUR CLIENT DOES NOT SPONSOR VISAS - YOU WILL ALREADY HOLD THE RIGHT TO WORK WITHIN THE UK