25 jobs found

NDT Technician Rotating Day/Late/Night - Monday - Friday Salary: £18.54p/hr (£35.6k) Wigston (LE18) We are looking for an experienced NDT technician who knows their way around visual, dimensional & fluorescent penetrant inspection techniques click apply for full job details

Maths Teachers Required (ECT's & Experienced) Are you a high-performing Maths Teacher (ECT or experienced) looking for a genuinely high-standard school where Maths is valued, behaviour is calm, and teaching is taken seriously? Do you want a Secondary School with exceptional subject leadership, strong outcomes and a culture that attracts talented staff? EdEx are working with multiple 'Outstanding' Secondary Schools across East London . These schools deliver strong Progress 8 and are expanding their Maths teams with talented teachers who have high expectations, strong subject knowledge and the ambition to make an immediate impact. Each of these schools boast: High academic expectations with a calm, purposeful learning culture Well-resourced labs and strong technician support Expert subject leadership and a collaborative Maths department Excellent CPD, coaching and development pathways (ECT & experienced) Low turnover, strong staff culture and sustainable workload Outstanding in recent Ofsted inspection All roles listed below are full time & permanent posts with September 2026 starts unless stated otherwise! Maths TEACHERS ARE REQUIRED FOR THE FOLLOWING ROLES Maths ECT (Biology / Chemistry / Physics welcomed) Maths Teacher (KS3-KS4) Maths Teacher (KS5) - A-Level specialism welcomed If any of the above Maths roles appeal to you and you would like to find out more information, then please apply now! You will be contacted within 2 hours if you have been shortlisted by your personal consultant Josh - initial chats are welcomed! Maths Teachers Required Permanent East London INDT

English Teachers Required (ECT's & Experienced) Are you a high-performing English Teacher (ECT or experienced) looking for a genuinely high-standard school where English is valued, behaviour is calm, and teaching is taken seriously? Do you want a Secondary School with exceptional subject leadership, strong outcomes and a culture that attracts talented staff? EdEx are working with multiple 'Outstanding' Secondary Schools across East London . These schools deliver strong Progress 8 and are expanding their English teams with talented teachers who have high expectations, strong subject knowledge and the ambition to make an immediate impact. Each of these schools boast: High academic expectations with a calm, purposeful learning culture Well-resourced labs and strong technician support Expert subject leadership and a collaborative English department Excellent CPD, coaching and development pathways (ECT & experienced) Low turnover, strong staff culture and sustainable workload Outstanding in recent Ofsted inspection All roles listed below are full time & permanent posts with September 2026 starts unless stated otherwise! English TEACHERS ARE REQUIRED FOR THE FOLLOWING ROLES English ECT (Biology / Chemistry / Physics welcomed) English Teacher (KS3-KS4) English Teacher (KS5) - A-Level specialism welcomed If any of the above English roles appeal to you and you would like to find out more information, then please apply now! You will be contacted within 2 hours if you have been shortlisted by your personal consultant Josh - initial chats are welcomed! English Teachers Required Permanent East London INDT

Science Teachers Required (ECT's & Experienced) Are you a high-performing Science Teacher (ECT or experienced) looking for a genuinely high-standard school where science is valued, behaviour is calm, and teaching is taken seriously? Do you want a Secondary School with exceptional subject leadership, strong outcomes and a culture that attracts talented staff? EdEx are working with multiple 'Outstanding' Secondary Schools across East London . These schools deliver strong Progress 8 and are expanding their Science teams with talented teachers who have high expectations, strong subject knowledge and the ambition to make an immediate impact. Each of these schools boast: High academic expectations with a calm, purposeful learning culture Well-resourced labs and strong technician support Expert subject leadership and a collaborative Science department Excellent CPD, coaching and development pathways (ECT & experienced) Low turnover, strong staff culture and sustainable workload Outstanding in recent Ofsted inspection All roles listed below are full time & permanent posts with September 2026 starts unless stated otherwise! SCIENCE TEACHERS ARE REQUIRED FOR THE FOLLOWING ROLES Science ECT (Biology / Chemistry / Physics welcomed) Science Teacher (KS3-KS4) Science Teacher (KS5) - A-Level specialism welcomed Biology Teacher Chemistry Teacher Physics Teacher If any of the above Science roles appeal to you and you would like to find out more information, then please apply now! You will be contacted within 2 hours if you have been shortlisted by your personal consultant Josh - initial chats are welcomed! Science Teachers Required Permanent East London INDT

We are excited to offer a fantastic opportunity for a permanent HGV Technician to join our dynamic Trafford Account. This role will be carried out onsite at Tatton House, 11 Caldey Road, Roundthorn Industrial Estate, Wythenshawe, Manchester, M23 9LF. This position offers a competitive salary and over time. The standard weekly hours are 40hrs per week As an HGV Technician at our Trafford Account, you will ensure the maintenance and repair of waste trucks, contributing significantly to environmental and community well-being. You'll work in a modern workshop with 6 bays, heated and well-lit, equipped with a 4-post column ramp lift, two summer lifts, brake testing headlamp bay, parts room stocked by a third party, and an electric jetwash system. Your responsibilities will include using advanced diagnostic tools, dismantling and overhauling vehicle components, maintaining vehicles and plant equipment, completing documentation on tablets and PDAs, ensuring health and safety protocols, performing road tests, and handling ad-hoc driving jobs. You will be part of a cohesive team, maintaining a fleet of 150 vehicles that are critical for waste management, fostering a cleaner and healthier environment for the community. What You'll Do: Utilise advanced diagnostic tools to identify faults and execute effective repairs. Dismantle and overhaul vehicle components to restore optimal functionality. Maintain vehicles and plant equipment to ensure efficient operation. Use tablets and PDAs to complete and maintain documentation, including job cards and inspections. Test equipment and tools, monitor workshop performance, and ensure adherence to health and safety protocols. Perform road tests on vehicles to confirm safety and assist with roadside breakdowns, committing to ongoing professional development. Ad-hoc driving jobs e.g. Taking a vehicle to get an MOT test etc Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. Career Growth: Propel your career with clear, dynamic advancement opportunities to roles like a supervisor or explore different career opportunities within the account or business. Training Opportunities: Unlock your potential with comprehensive training, including fully funded CPC qualification, tailored to your growth. Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, and Multicultural Leadership programs. Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What You'll Bring: City & Guilds in heavy vehicles, maintenance and repair, IRTEC, or NVQ certification Category C HGV license, Driver CPC holder Municipal experience Special tools, and diagnostic equipment provided Ability to work alone or as part of a team Good communication skills If you're ready to make a meaningful impact on our business and contribute to a shared, sustainable future, we invite you to join us in advancing our strategy and driving positive change. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to our recruiter for this role, at (url removed)

We are expanding our team and looking for an Electron Beam Welder (EBW) Technician to support precision manufacturing in a cleanroom environment. This role involves operating and maintaining EBW machines, ensuring weld quality on metals and super alloys, and working closely with engineering teams to deliver high-quality components. Key Responsibilities Set up, operate, and monitor EBW machines. Prepare and inspect materials for welding. Perform visual, mechanical, and NDT inspections. Maintain equipment, records, and quality reports. Collaborate with engineering and production teams. Ensure compliance with health, safety, and cleanroom standards. Essential Skills Strong knowledge of cleanroom assembly and integration. Expertise in electron beam welding processes. Proficient with measuring equipment and QC. Ability to read and interpret engineering drawings. Previous EBW or precision welding experience. Background in manufacturing or industrial environments.

Role: -NDT Technician (UT- Level 2) Location: -Wirral- site, onshore and offshore work Salary-£40,000-45,000 plus (£120 per day onshore, £175 per day offshore) Russell Taylor Group have a fantastic opportunity for two NDT Engineers to join a market leader in inspecting and testing for one of our clients on the Wirral, the roles have come about due to growth! One of the positions will specialise in UT click apply for full job details

Premier Recruitment Group has the privilege to recruit on behalf of our very prestigious client based in Rainham, East London, Essex. We are recruiting for experienced and forward thinking Multi-Skilled Shift Engineer . This is full time and permanent position and working for very well established company. Very interesting and varied role with a scope for progression. We are currently seeking Multi-Skilled Shift Engineer. This is a very exciting time to join a growing company regarded as experts in their industry, with opportunities for employees to develop within their role. Attractive salary and benefits. Work Pattern: Shift pattern 39 - 42 hrs per week (rotating days and nights) Days: 6am - 6pm Nights: 6pm - 6am The role: Reporting to Engineering Team Leader Follow GMP, Safety, Quality, Operational and Engineering procedures. Support production prioritising Safety, Quality and Production Volume. Comply with legislative and statutory requirements. Key areas of responsibility: Ensure all work is documented through the computerised maintenance management system (CMMS), shift handovers and PM worksheets. Awareness of site performance and KPI's, and support others to achieve targets for safety, Identify and control spare stock holding and procurement linking into PM system and CMMS Identifying and planning of maintenance and corrective actions in area from CMMS Carry out continuous improvement tasks identified within the area. Providing Technical expertise within area to other Technicians and Operators. Assist and deliver basic training for Operators and Technicians on equipment function and Supervise and take responsibility for Contractors on site. Understand the Service Building and Site Maintenance, complete basic tasks in these areas. Control work through the Permit to Work system. Proactively drive continuous improvements within own area liaising with other departments Offer improvement ideas for production equipment and facilities Electrical and mechanical installation works. Qualifications/Experience required: Prefer Advanced Modern Apprenticeship trained Electrically/Mechanical qualified within the following range: (a) degree (b) HND/HNC( c) OND/ONC (d) BTEC 4 0R 3 NVQ level 3 or above Completed authorised or competent persons training Technically competent to safely operate, make safe and test systems or installations IT literate Experienced shift engineer with a proven track record Flexible to work days and nights. Multi Skilled (or electrical 18th edition) Workshop machines and power tools experience IOSH managing safely. Experience of working in confirmed spaces & working at height CI trained in manufacturing environment. Lone worker experience (preferred) Knowledge of BRC and HACCP food standards If you are interested please apply directly or call Tom Kurczab at Premier Recruitment Group INDTKJOBS

A successful, well-established provider of non-destructive testing to the welding and fabricating industry is looking for a Trainee NDT Technician to join the team. Along with a salary of up to £28,000 per annum, you will receive: Progression opportunities as you gain experience and certifications. Company pension scheme and annual bonus click apply for full job details

Role: -NDT Technician (UT- Level 2) Location: -Wirral- site, onshore and offshore work Salary-£40,000-45,000 plus (£120 per day onshore, £175 per day offshore) Russell Taylor Group have a fantastic opportunity for two NDT Engineers to join a market leader in inspecting and testing for one of our clients on the Wirral, the roles have come about due to growth! One of the positions will specialise in UT click apply for full job details

Role: -NDT Technician (UT- Level 2) Location: -Wirral- site, onshore and offshore work Salary-£40,000-45,000 plus (£120 per day onshore, £175 per day offshore) Russell Taylor Group have a fantastic opportunity for two NDT Engineers to join a market leader in inspecting and testing for one of our clients on the Wirral, the roles have come about due to growth! One of the positions will specialise in UT click apply for full job details

Role: -NDT Technician (UT- Level 2) Location: -Wirral- site, onshore and offshore work Salary-£40,000-45,000 plus (£120 per day onshore, £175 per day offshore) Russell Taylor Group have a fantastic opportunity for two NDT Engineers to join a market leader in inspecting and testing for one of our clients on the Wirral, the roles have come about due to growth! One of the positions will specialise in UT click apply for full job details

We are expanding our team and looking for an Electron Beam Welder (EBW) Technician to support precision manufacturing in a cleanroom environment. This role involves operating and maintaining EBW machines, ensuring weld quality on metals and super alloys, and working closely with engineering teams to deliver high-quality components. Key Responsibilities: Set up, operate, and monitor EBW machines. Prepare and inspect materials for welding. Perform visual, mechanical, and NDT inspections. Maintain equipment, records, and quality reports. Collaborate with engineering and production teams. Ensure compliance with health, safety, and cleanroom standards. Essential Skills: Strong knowledge of cleanroom assembly and integration. Expertise in electron beam welding processes. Proficient with measuring equipment and QC. Ability to read and interpret engineering drawings. Previous EBW or precision welding experience. Background in manufacturing or industrial environments.

Recruit4staff are proud to be representing their client, a leading food manufacturing company in their search for a Production Technician to work in their leading facility in Telford. MUST BE HAPPY TO ATTEND PSYCHOMETRIC TESTING AT FIRST STAGE. For the successful Production Technician our client is offering; Starting salary of £33,733 which rises as experience/competence are signed off, if you can run all processes it can rise to £43,487 (For most this usually takes around 12 months but can be achieved sooner) 4 on 4 off, 12 hour shifts rotating days and nights, 07:25 - 19:35/19:35 - 07:25 Permanent role Benefits Health Cash Plan, tech schemes and many more. Holiday pay based on average hours worked, 5 weeks & 8 Bank Hols after 1st year. Health & Life assurance You will be part of a team working with technology that s always advancing, in a business that s constantly growing and pushing boundaries by liaising with development teams for improvements on standards. As a Production Technician your responsibilities will be: Stay hands-on with the machinery spotting potential faults, investigating issues and problem solving to prevent downtime. Ensure 100% compliance with Food Safety, Quality, and Health & Safety standards. Running the line to standard operating procedures, which include start- up and changeovers. Leading a line with machine operators, training and driving performance. Liaising with development teams for improvements on standards to drive continuous improvement, supporting refining processes to boost productivity. Taking ownership of the production line s performance, ensuring it runs efficiently and is complete control. What our client is looking for in a Production Technician: An individual with a strong technical mindset, who enjoys working with, setting and operating machinery- ESSENTIAL Technically competent to solve problems, taking action to ensure delivery, gaining support to ensure delivery Experience with changeovers/ basic machine maintenance- ESSENTIAL Someone excited by learning new techniques & technology, with a drive for continuous improvements and lean manufacturing. An effective communicator who listens and gives clear instructions, someone who isn t afraid of challenge, gaining support when from experts when needed. Ideally experienced within the food or processing industry although not essential Must be happy/available to attend a numerical and verbal reasoning test- ESSENTIAL Key skills or similar job titles; Production Technician, Process Operator, Process Technician, Quality Inspector, Quality Assurance, QA Technician, Quality Controller, Food Manufacturing, Food Packaging Commutable From; Telford/Shrewsbury/Wolverhampton/Bridgnorth/Cannock/Newport/Market Drayton/Whitchurch For further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business. IndTel HJ

Adecco are recruiting for a skilled NDT Technician to join our client in Irvine on a permanent basis . Your role will be to carry out inspections using approved non-destructive examination (NDE) techniques. You will ensure materials meet required standards and are released without non-conformance reports (NCRs). Key Responsibilities Perform NDE inspections using approved methods and standards. Ensure all inspected materials are released with zero NCRs. Support the NDT Manager with training of staff and trainees. Manage NDE consumables and ensure equipment is calibrated. Participate in inspections involving third-party witnesses. Required Competencies Strong communication and decision-making skills. Ability to write clear and accurate reports. Skilled in reading and interpreting engineering drawings. Understanding of NDT specifications and procedures. Flexible, adaptable, and able to meet tight deadlines. Performance Expectations Carry out in-house and on-site NDT inspections as required throughout the production process. Maintain high standards to ensure all materials are inspected and released without NCRs. Qualifications PCN Level 2 certification. Qualified in Magnetic Particle Testing (MT) and Penetrant Testing (PT) as a minimum. Ultrasonic Testing (UT) qualification is preferred. Please get in touch for a confidential chat. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

We have an excellent opportunity for a Vehicle Service Technician to join the centre in Saltash. The Opportunity: As a Vehicle Service Technician you will be part of a team where you will play an integral role in ensuring the highest standards of safety and customer satisfaction. You will be part of a company that values training and development. Use your current skills and knowledge and drive your career forward with Michelin's biggest brand. As our Vehicle Service Technician, you will be responsible for: Delivering the core fast fit products and services, including tyre fitting, wheel alignment, battery fitment and more Assisting our point of sale (POS) with the delivery of the Service, Maintenance & Repair (SMR) targets Demonstrating knowledge of our products and values Providing detailed guidance and support to our customers Following our Life Saving Rules, ensuring Health & Safety in everything that we do Requirements: Demonstrable experience of working in a similar Technician role (Mechanic/Vehicle Technician etc.) IMI level 2 Qualification (or above) is desirable Full UK Driving Licence Benefits & Perks: 40 hours per week NO Sundays! Bonus scheme 33 days' holiday (inclusive of bank holidays) Training and career advancement opportunities Refer and Earn scheme Michelin pension scheme matched up to 6% of base salary Life assurance & income protection (as a member of our pension scheme) Uniform provided Enhanced maternity & paternity pay Employee recognition & long service award schemes Health and wellbeing programme Healthcare cash plan options Discounts on holidays, shopping, restaurants and much more, all through our employee benefits programme _ATS Euromaster is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of race, religion, sex, sexual orientation, age, disability or any other status protected by law._ INDTECH Job Types: Full-time, Permanent Pay: £26,500.00 per year Additional pay: Bonus scheme Benefits: Bereavement leave Company pension Cycle to work scheme Employee discount Employee mentoring programme Employee stock purchase plan Enhanced maternity leave Enhanced paternity leave Free parking Health & wellbeing programme On-site parking Referral programme Store discount Schedule: 8 hour shift Day shift Application question(s): Do you have any unspent criminal convictions? Do you have any points or DQ on your Driving Licence? If so, please state Experience: Light Vehicle Mechanics: 1 year (required) Licence/Certification: Driving Licence (required) IMI Level 2 or equivalent (preferred) Work authorisation: United Kingdom (required) Work Location: In person