113 jobs found

Control Systems Engineer £45-60k Staffordshire Ref: 25122 An established automation engineering business is seeking an Automation Controls Engineer to support the design, development, and commissioning of hard-wired and PLC/computer-based control systems. The role covers a wide range of materials handling and automated systems, from initial design through to on-site commissioning and customer handover. This is a technically varied position offering involvement across the full project lifecycle, working closely with engineering, project, and customer teams. Automation Software Engineer - The Role: Design and commission hard-wired and PLC-based control systems for automation and materials handling equipment Develop safe, reliable control systems in line with applicable UK, European, and international regulations Deliver control solutions on time and within budget Provide technical input and support to sales and project teams PLC & HMI software design, development, testing, and commissioning for small to large-scale automation systems Deliver customer training at operator and engineer level Provide ongoing technical support Automation Software Engineer - The Person: Minimum HNC / HND (or higher) in Electrical, Electronic, or Control Engineering At least 5 years post-qualification experience in automation software engineering Strong experience with PLC, HMI, and Auto-ID systems Good working knowledge of industrial networking technologies Solid understanding of AC and DC motor control, including variable speed drives Experience with robot programming helpful Confident use of electrical test equipment Good understanding of mechanical equipment used in materials handling systems Commercial awareness and understanding of project delivery environments Able to contribute to technical documentation Experience of Siemens TIA Portal is essential for this role Located in Tamworth, Staffordshire, this role would be commutable from Lichfield, Coleshill, Tamworth, Birmingham, Coventry, Walsall, Redditch, Atherstone and surrounding. Looking for a job involved with automation, control systems, process control or systems integration? Register your details on our website For further information call Sarah Clarke AE1

Controls Project Systems Engineer (PLC) £35-£45 ltd / hr South East ABJ7685 Salary dependent on experience Start Jan 2026 - 3m with view to extension ONSITE A new position for an experienced Controls Project Systems Engineer (PLC exp) is urgently required for a leading engineering services company to for new upcoming projects.As controls engineer you will be carrying out programming of Siemens S7-1500 PLCs using TIA Portal. As controls engineer experience you will be programming of WinCC SCADA systems - interfacing with multiple S7-1500 PLCs. - Failsafe programming would be desirable. As control engineer you will have the ability to be technical lead for a control panel and review electrical drawings, panel assembly. As control project engineer you will also have the ability to generate documentation such as test plans, Installation / commissioning & Operation / Maintenance Documentation. Mainly office based apart from when you go to clients' sites (must be able to drive with car) with teamwork pivotal to the success of the company. Site visits would normally be withinthe UK. Process safety experience desirable , as they will be building burner management systems The role and responsibilities Manage PLC based system design and consultancy projects from point of sale, through initial design and manufacture, to site commissioning. Responsible for a wide range of engineering design and project management tasks, Confident user of general office software (e.g. Microsoft Word / Excel) for preparing various in-depth project related documentation. (e.g. Specifications / reports / calculations etc.). Critically review, and mark-up documents / drawings generated by others, providing constructive feedback. Supervision of workshop technicians is required during the system build of your own projects. Rigorously testing - so an ability to apply problem solving and analytical techniques, to plan and carry out appropriate system tests is needed. General control of project work, including look-ahead planning, control of project budgets and schedules, change control, estimating activities, project document management and progress reporting. Review of client's specifications and other national / international standards to ensure project compliance. Development of functional requirements specifications for control systems, SIS, F&G and instrumentation. PLC, HMI & SCADA application software development Participation in design reviews, including HAZOP / LOPA, hazardous area, etc. Skills and Experiences HNC / HND / or Degree qualification in a relevant engineering discipline, Several years' experience PLC configuration and application software development. (e.g. ABB AC500-S/ 800xA HI, Emerson DeltaV SIS, Triconex, HIMA F60 / HiQuad X, Siemens S7-Failsafe, Allen Bradley ControlLogix / GuardLogix) Customer facing,great communication skillsfrom a technical and commercial perspective essential. HMI / SCADA configuration (e.g.Siemens WinCC / PCS7 / Emerson DeltaV) Industrial communications System architectural design and selection / configuration of appropriate protocols (e.g., Profinet / Profibus / Modbus TCP & RTU / OPC etc.) Experience in the planningand delivery of technical projectsis essential. Desirable - process safety experience, as they will be building burner management systems Essential -UK DrivingLicence Desirable - Industrial Instrumentation experience Good working knowledge of the Functional Safety Standards BS EN 61508 / 61511 They offer an attractive salary (dependent on experience), To Apply: Please contact Alison Basson

We are looking for a Multiskilled Electrical Maintenance Engineer to work on a permanent basis in St Helens. The role is working for a global manufacturing company. The shifts for the Multiskilled Electrical Maintenance Engineer are Monday to Friday; 6am - 2pm and 2pm - 10pm (No nights). Salary is c 40-50,000 per annum (depending on experience) plus 25 days' holidays, company bonus, healthcare, pension etc. Duties for the Multiskilled Electrical Maintenance Engineer: Key Responsibilities Perform planned preventative maintenance (PPM) and reactive maintenance on electrical and mechanical production equipment. Diagnose electrical faults on machinery including motors, sensors, control panels, PLCs, drives, and automation systems. Carry out mechanical repairs and adjustments as required, including work on pneumatics, hydraulics, conveyors, and general plant equipment. Respond promptly to equipment breakdowns to minimise operational disruption. Assist in the installation, commissioning, and modification of machinery and production lines. Ensure all maintenance tasks are performed safely and in compliance with company procedures and industry regulations. Maintain accurate maintenance logs, documentation, and equipment records. Identify opportunities for continuous improvement and contribute to reliability and efficiency projects. Support cross-functional teams including production, quality, and engineering. Participate in shift patterns, on-call rota, or overtime as required. Skills & Experience Time-served apprenticeship or recognised qualification in Electrical Engineering (NVQ Level 3, HNC/HND, or equivalent). Strong electrical fault-finding skills within a manufacturing or industrial environment. Good mechanical aptitude and experience working on mechanical systems. Familiarity with PLC systems (Siemens, Allen-Bradley, etc.) is desirable. Experience working with AC/DC motors, variable speed drives, sensors, and automated machinery. Ability to read and interpret electrical and mechanical drawings. Strong problem-solving skills and a proactive approach. Good communication skills and ability to work independently or as part of a team. Knowledge of health & safety legislation, safe isolation procedures, and permit-to-work systems. How to Apply for the Multi Skilled Electrical Maintenance Engineer: Please call Rebecca at Simply Recruitment Group or press APPLY NOW!

Graduate Electrical Engineer to £28,000 + exceptional earnings potential Derby or London Our Derby based client is renowned as a market leader in the provision of innovative and bespoke integrated systems to the transportation infrastructure industry. Offering a range of highest quality services that encompass Project Management and Implementation, Consultancy and Software Development to blue chip clients worldwide, as a result of continued success and an ongoing planned programme of strategic growth, they are now about to embark on their 2026 GRADUATE ELECTRICAL ENGINEER and GRADUATE CONTROLS ENGINEERS recruitment campaign to complement their established and successful team of electrical and control professionals. With many projects incorporating SCADA control systems and integrated audio & visual communication systems using IP technology, as market leaders in their field, they have sustained continued growth generating exciting opportunities for Graduate professionals, who will be technically motivated, degree/HND qualified engineering graduates in control, electrical, electronic or software engineering. As an enthusiastic and competent graduate electrical engineer, you will be eager to gain experience in the design, implementation and testing of control systems using PLC code, configuring SCADA packages, high level language programming such as C, designing electrical panels and integrating audio-visual IP sub-systems. Key responsibilities and skills for these varied and challenging Graduate Electrical Engineer roles will include: Working as part of a team to design, implement and test control / integrated systems. Program a variety of PLCs using Ladder Logic, Function block or Statement List methods and both programming and configuring SCADA software packages Competent use of high-level programming languages ranging from C, C++, C#, VB and VBA. IP network design and configuration. Design and test ELV electrical panels. Configuration of CCTV, PA and telephone systems over an IP network. Perform a FAT and site commissioning under formal client witnessed conditions and working collaboratively and proactively with clients Our client is a progressive organisation with a strong emphasis on client relationships, and they recruit only the highest calibre ambitious people with drive and enthusiasm able to work in a friendly and supportive environment where commitment, flexibility and a sense of humour are valued. You will work with state-of-the-art equipment in modern premises and a flexible working hours environment. Due to timescale constraints, applications for the Graduate Electrical Engineer position will ONLY be considered on behalf of candidates either based in or able to relocate at short notice to the East Midlands region, who essentially hold a FULL UK DRIVING LICENCE and who are eligible to work in the UK with immediate effect. You must also be able to demonstrate at least 12 months post-academic work experience gained within a commercial environment. Contact the Graduate Recruitment Team at Premier Technical Recruitment on or email your cv in the strictest confidence to for further details.

Maintenance Engineer Required! Our client is a well-established manufacturing business operating within a technically demanding industrial environment. On behalf of our client, we are looking to recruit an experienced Maintenance Engineer to join their team. The successful candidate will take responsibility for the maintenance and repair of electrical systems and machinery. Package: Day shifts: 8am-5pm Monday to Thursday & 8am-2:30pm Fridays Company pension scheme 23 days holiday + bank Salary 40,000 - 45,000 (DOE) Maintenance Engineer - Responsibilities: Plan, schedule, and carry out planned and reactive maintenance of electrical and mechanical systems. Diagnose, troubleshoot, and repair machinery faults to ensure trouble-free production. Maintain, test, calibrate, and modify electrical control systems, PLCs, VFDs, and schematics. Support installation, commissioning, decommissioning, and relocation of machinery. Organise the repair, routine maintenance, and mechanical modifications (pneumatics/hydraulics) of production equipment. Select, order, and manage spares and project-related procurement. Work closely with production teams to improve machine reliability, efficiency, and productivity. Contribute to preventive maintenance programs and continuous improvement initiatives. Ensure all work complies with electrical safety standards, regulations, and company policies. Maintenance Engineer - Requirements: Degree, HND, or equivalent qualification in Electrical Engineering or a related discipline Proven experience in a manufacturing or industrial environment Some mechanical experience is also advantageous Strong understanding of electrical systems, control panels, and power distribution Ability to interpret and produce electrical schematics Strong fault-finding and problem-solving skills Good knowledge of electrical safety standards and compliance Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Commissioning Engineer c£70k + overtime + generous benefits London (Hillingdon and surrounding area) Our client has been established for more than 30 years and is renowned as a market leader in the provision of innovative and bespoke integrated systems, primarily to the transportation, airport and power infrastructure industry, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit a number of experienced and ambitious Commissioning Engineer professionals to complement their established and successful team of electrical and control engineers delivering end to end control system solutions. Working a combination of days and nights , the role of Commissioning Engineer works alongside the Hillingdon based project team and the development engineers during the commissioning stages of multiple projects and ensuring a smooth handover to the customer. Ideally with a background in the control system industry, core duties will include (but not be limited to): Checking installation of equipment is to the correct standard prior to starting testing. Performing testing of a system according to the Installation and Commissioning Test document. PLC data input tests including verification of operation to and from plant and field devices into PLCs. Field device set-up Performing site acceptance tests, fault find and correction of any PLC code or wiring issues. Producing documentation such as RAMs; test documentation; weekly progress reports etc. Attending site progress meetings, toolbox talks etc and providing professional representation of the business especially during client-facing test conditions. To be considered for the varied and challenging Commissioning Engineer positions offering genuine scope for career progression and development, it is envisaged that successful candidates will demonstrate at least 3 years relevant commissioning work experience and be qualified to at least HND level or above in electrical or control engineering . Essentially you will hold a full UK driving licence, an EDU/EEA/Swiss passport for working in Europe and have no criminal convictions due to security clearances required by airport authorities. In return and in addition to a generous salary negotiable based on experience, benefits include 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years, paid overtime, a Company performance-related bonus as well as Health & Wellbeing benefits, Pension scheme, Anniversary celebrations and social events as well as a Flexible working hours scheme. Contact the Service Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

Commissioning Engineer to c£60k + overtime + generous benefits Derby Our Derby based client has been established for more than 30 years and is renowned as a market leader in the provision of innovative and bespoke integrated systems, primarily to the transportation, airport and power infrastructure industry, and as a result of continued success and an ongoing planned programme of strategic growth, they are now seeking to recruit a number of experienced and ambitious Commissioning Engineer professionals to complement their established and successful team of electrical and control engineers delivering end to end control system solutions. Working a combination of days and nights , the role of Commissioning Engineer works alongside the project team and the development engineers during the commissioning stages of multiple projects and ensuring a smooth handover to the customer. Ideally with a background in the control system industry, core duties will include (but not be limited to): Checking installation of equipment is to the correct standard prior to starting testing. Performing testing of a system according to the Installation and Commissioning Test document. PLC data input tests including verification of operation to and from plant and field devices into PLCs. Field device set-up Performing site acceptance tests, fault find and correction of any PLC code or wiring issues. Producing documentation such as RAMs; test documentation; weekly progress reports etc. Attending site progress meetings, toolbox talks etc and providing professional representation of the business especially during client-facing test conditions. To be considered for the varied and challenging Commissioning Engineer positions offering genuine scope for career progression and development, it is envisaged that successful candidates will demonstrate at least 2 years relevant commissioning work experience and be qualified to at least HND level or above in electrical or control engineering . Essentially you will hold a full UK driving licence, an EDU/EEA/Swiss passport for working in Europe and have no criminal convictions due to security clearances required by airport authorities. In return and in addition to a generous salary negotiable based on experience, benefits include 33 floating holidays to take when you like with your entitlement increasing by an additional 2 days every 5 years, paid overtime, a Company performance-related bonus as well as Health & Wellbeing benefits, Pension scheme, Anniversary celebrations and social events as well as a Flexible working hours scheme. Contact the Service Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

Automation Project Engineer Telford c£65k+ neg dep exp + benefits Our Telford based client has been established for almost 20 years and are recognised as leading providers of all aspects of hardware and software design through to robot systems integration and commission on a range of bespoke automation solutions for supply to a diverse range of clients throughout the UK, and as a result of continued success and an ongoing programme of strategic growth, they are now seeking to recruit an experienced Automation Project Engineer to complement their highly successful Projects team. Tasked with supporting multiple projects averaging You will develop technical documents in line with client requirements to the industry standard using technical features, diagrams and language, and maintain overall responsibility for project gateway sign off for the automation of the project - including (but not limited to) FDS, electrical design (including AutoCAD layouts and converting mechanical layout into Controls layout), FAT, electrical installation planning, commissioning & final acceptance testing. Responsible for all aspects of Resource Management for each assigned project, you will ensure projects materials are identified, in budget, ordered and delivered onsite to project schedule and will create associated project documentation to satisfy CE/UKCA marking requirements. With excellent organisational and communication skills at all levels, you will support the activities of fellow team members and ensure compliance with relevant H&S legislation as applicable and provide weekly project updates on task status as required. Able to work away as required and also attend meetings at an associated facility in Nottingham, as Automation Project Engineer you will undertake additional training where required and be comfortable in working both autonomously and as part of the team, both on site and in the workshop, ensuring all relevant Health and Safety legislation is adhered to. Skilled in all aspects of scheduling, prioritization, budget management, task management and risk management, you will essentially demonstrate at least 3 years previous experience of project management within a logistics automation environment with proven knowledge and experience gained in electrical / PLC design and development ideally from a conveyor, robotics or automotive arena. Contact the Projects Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

Electrical Controls Engineer Inspire Resourcing Ltd are looking for a skilled Electrical Controls Engineer to join our well-established Controls team to complete project life cycles. This is from programming Siemens PLC/HMI/SCADA systems to crafting essential design documentation. This role is based in the Barnsley office, with occasional UK site visits required for commissioning and FAT/SAT. Key responsibilities for the Electrical Controls Engineer: Production of FDS / SDS. Design and programming of PLC / HMI / SCADA systems for various industries using SIEMENS, Mitsubishi etc. equipment. (SIEMENS essential) AutoCAD design of electrical distribution / motor control centres and PLC control systems. Attending client and sub-contractor meetings to support the project by providing technical expertise. Production of test documents FAT/SAT, and visits to panel manufacturer premises for Factory Acceptance Testing. Preparation of estimates, tenders, design specifications, and tender specifications. Authoring O&M Manuals. Keeping abreast of the latest developments in electrical engineering. Essential qualifications / experience / capabilities for the Electrical Controls Engineer: An excellent understanding of a Controls Engineer responsibilities. Engineering qualification ideally level 4 (HND/Degree or equivalent). Relevant design (AutoCAD) experience in a relevant electrical design / controls engineering role Experience in control panel / MCC design, ideally with SIEMENS equipment. Project management experience will be an advantage. Ability to produce and manage RAMS. Experience in a turnkey project environment Highly organised with attention to detail and excellent problem-solving skills. Ability to work proactively both individually and as part of a team. The salary Package is 60-70K Location: Barnsley

Field Service Engineer Required! Our client is a leading manufacturer of specialist sterilisation solutions, serving a variety of professional, research, and clinical sectors worldwide. On behalf of our client, we are seeking a Field Service Engineer. The successful candidate will be responsible for providing routine maintenance, fault finding, repairs, calibration, installation, commissioning, and operator training at customer sites. Package: Salary £35,000 - £40,000 (DOE) Fully expensed company vehicle, mobile phone & Credit Card (subsistence expenses for out of area tasks) 25 Days Holiday + Bank Holidays Specific Product Training Given Life Insurance Company Pension Scheme Working Hours Monday - Fridays 8:30am till 5pm Field Service Engineer - Responsibilities: Provide routine preventive maintenance, fault finding, and repairs across a full range of autoclaves. Perform calibration and validation, including temperature mapping and performance adjustments. Undertake installation of new equipment, commissioning, operator training, and equipment modifications. Apply a proactive approach to diagnosing and resolving faults, providing accurate feedback for corrective and preventive actions. Read and interpret electrical and mechanical drawings to support repairs and modifications. Maintain quality standards in line with ISO 9001 and ISO 17025. Become fully familiar with autoclave construction, control, and performance to provide effective support to customers. Field Service Engineer - Requirements: A qualification to HNC, HND or Degree level in a mechanical/electrical engineering discipline Full UK Drivers license & Passport are essential Willingness to travel abroad when required Electrical: Understanding of single-phase and three-phase systems, PLCs, and associated control/monitoring components. Mechanical: Hands-on experience with component fault finding, replacement, and testing; knowledge of basic pipework and plumbing systems Self-motivated with strong customer service and time management skills Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Control Software Engineer to c£55k neg dep exp plus benefits East Midlands - commutable from Nottingham, Leicester and Coventry Our client demonstrates almost 40 years' experience in the manufacture of bespoke automation and robotic systems for a range of industrial applications and are regarded as one of the leading automation system solution providers in the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced and enthusiastic Control Software Engineer to complement their established professional team and deliver machine control system solutions allied to a range of automated machinery-based projects. Tasked with writing and developing software, PLC & HMI coding for various automation projects, as a Control Software Engineer you will also be responsible for the electrical design and creation of machine control system solutions for special purpose automated machinery projects. Other duties will include delivering control and safety systems that comply with the requirements of the machinery directive and appropriate applicable standards, and electrical system design, selection of components and generating detailed circuit diagrams as required. Based near Leicester, you will also be responsible for the integration of various robots, including SCARA, Delta & 6-axis and will liaise extensively with customers, suppliers and team members, so effective communication skills at all levels are essential for the position, and you will be comfortable in working both autonomously and as part of a team dedicated to delivering projects within budgetary and timescale constraints. Additionally, you will follow projects through from design, development and commissioning stages on machine control and safety systems and will be responsible for the creation of associated electrical documentation including circuit diagrams, cable schedules, installation documents BOM's. and bills of materials. You will also ensure that machine electrical systems and safety systems comply with all relevant European and international safety standards and for the correct selection and procurement of all necessary components. To be considered for this varied and challenging Control Software Engineer role it is envisaged that the successful candidate will demonstrate at least 5 years' experience of software design and PLC coding with particular experience of working with Omron, Siemens and Allen Bradley equipment proving distinctly advantageous. You will essentially possess comprehensive skills and experience of electrical design for machine automation using ePlan, along with knowledge and understanding of the various national and international electrical standards for machine design and machine safety systems and requirements to CE mark machine systems. Realistically you will be qualified to degree level or equivalent in electrical / electronic engineering or a closely related control system discipline with a flexible approach to travel to customer sites across the UK if required. In return, an excellent benefits package and genuine scope to progress your career into a management position supervising a team of control software and service engineers is available for the right candidate - so if you believe you possess the relevant skills and experience for this position, contact the Controls Team at Premier Technical Recruitment on or email your cv in confidence to for further details.

We want to recruit an experienced International Field Service Engineer who is capable of fault finding and modifying Siemens and / or Allen Bradley PLC s on packaging and filling machinery which is used in the food, pharmaceutical and chemical markets. This is a global role involving spending up to 60% of your time travelling and working abroad, usually one week trips in Europe and Worldwide but you will be home based. BASIC SALARY: up to £55,000 BENEFITS: Overtime to earn circa £10,000 ALL travel expenses covered when abroad or in the UK LOCATION: Home based COMMUTABLE LOCATIONS: Birmingham, Manchester, Leeds, Nottingham, Bristol, Milton Keynes, Peterborough JOB DESCRIPTION: Service Engineer, Maintenance Engineer - manufacturer, machinery This is an International Service Engineer role involving the repair, refurbishment, upgrades and modification of installed machinery, and the installation and commissioning of new machinery. You will be working on standard and bespoke packaging and filling machinery used in the food, pharmaceutical markets. Home based you will be required to be in the office once per week when not working abroad. Overtime is paid door to door over 39 hours per week with very occasional weekend work. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - manufacturer, machinery You MUST have a proven track record as an (international) Field Service Engineer ideally with hands on experience of process or packaging machinery in the food, chemicals or pharmaceutical markets. The company will consider an experienced UK Service Engineer looking to move into an international role or even an experienced food or pharmaceutical factory Maintenance Engineer wanting to get into a field service role, with international travel. You WILL be capable of fault finding and modifying Siemens and / or Allen Bradley PLC s. You WILL be a qualified Electrical / Electronic Engineer. You WILL be able and willing to spend up to 60% of your time working abroad. THE COMPANY: A well established market leading British manufacturer of packaging and filling machinery used in the food, chemical & pharmaceutical markets. Extremely well run and profitable and a genuinely nice place to work. I have worked with the company for over 10 years and everyone I have placed there in management, in sales or in engineering roles is still working there. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18352, Wallace Hind Selection

We want to recruit an experienced International Field Service Engineer who is capable of fault finding and modifying Siemens and / or Allen Bradley PLC s on packaging and filling machinery which is used in the food, pharmaceutical and chemical markets. This is a global role involving spending up to 60% of your time travelling and working abroad, usually one week trips in Europe and Worldwide but you will be home based. BASIC SALARY: up to £55,000 BENEFITS: Overtime to earn circa £10,000 ALL travel expenses covered when abroad or in the UK LOCATION: Home based COMMUTABLE LOCATIONS: Birmingham, Manchester, Leeds, Nottingham, Bristol, Milton Keynes, Peterborough JOB DESCRIPTION: Service Engineer, Maintenance Engineer - manufacturer, machinery This is an International Service Engineer role involving the repair, refurbishment, upgrades and modification of installed machinery, and the installation and commissioning of new machinery. You will be working on standard and bespoke packaging and filling machinery used in the food, pharmaceutical markets. Home based you will be required to be in the office once per week when not working abroad. Overtime is paid door to door over 39 hours per week with very occasional weekend work. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - manufacturer, machinery You MUST have a proven track record as an (international) Field Service Engineer ideally with hands on experience of process or packaging machinery in the food, chemicals or pharmaceutical markets. The company will consider an experienced UK Service Engineer looking to move into an international role or even an experienced food or pharmaceutical factory Maintenance Engineer wanting to get into a field service role, with international travel. You WILL be capable of fault finding and modifying Siemens and / or Allen Bradley PLC s. You WILL be a qualified Electrical / Electronic Engineer. You WILL be able and willing to spend up to 60% of your time working abroad. THE COMPANY: A well established market leading British manufacturer of packaging and filling machinery used in the food, chemical & pharmaceutical markets. Extremely well run and profitable and a genuinely nice place to work. I have worked with the company for over 10 years and everyone I have placed there in management, in sales or in engineering roles is still working there. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18352, Wallace Hind Selection

We want to recruit an experienced International Field Service Engineer who is capable of fault finding and modifying Siemens and / or Allen Bradley PLC s on packaging and filling machinery which is used in the food, pharmaceutical and chemical markets. This is a global role involving spending up to 60% of your time travelling and working abroad, usually one week trips in Europe and Worldwide but you will be home based. BASIC SALARY: up to £55,000 BENEFITS: Overtime to earn circa £10,000 ALL travel expenses covered when abroad or in the UK LOCATION: Home based COMMUTABLE LOCATIONS: Birmingham, Manchester, Leeds, Nottingham, Bristol, Milton Keynes, Peterborough JOB DESCRIPTION: Service Engineer, Maintenance Engineer - manufacturer, machinery This is an International Service Engineer role involving the repair, refurbishment, upgrades and modification of installed machinery, and the installation and commissioning of new machinery. You will be working on standard and bespoke packaging and filling machinery used in the food, pharmaceutical markets. Home based you will be required to be in the office once per week when not working abroad. Overtime is paid door to door over 39 hours per week with very occasional weekend work. PERSON SPECIFICATION: Service Engineer, Maintenance Engineer - manufacturer, machinery You MUST have a proven track record as an (international) Field Service Engineer ideally with hands on experience of process or packaging machinery in the food, chemicals or pharmaceutical markets. The company will consider an experienced UK Service Engineer looking to move into an international role or even an experienced food or pharmaceutical factory Maintenance Engineer wanting to get into a field service role, with international travel. You WILL be capable of fault finding and modifying Siemens and / or Allen Bradley PLC s. You WILL be a qualified Electrical / Electronic Engineer. You WILL be able and willing to spend up to 60% of your time working abroad. THE COMPANY: A well established market leading British manufacturer of packaging and filling machinery used in the food, chemical & pharmaceutical markets. Extremely well run and profitable and a genuinely nice place to work. I have worked with the company for over 10 years and everyone I have placed there in management, in sales or in engineering roles is still working there. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18352, Wallace Hind Selection

Electrical Panel Wiring & Testing Technician Permanent position Salary Guide: Up to £41,600 PA (to £20.00 p/hr), Depending on experience Hours: 40 per week, Monday to Friday Location: Bishop's Stortford - Easy access from M11/Stansted Airport junction We are currently seeking a motivated and skilled Electrical Panel Wiring & Testing Technician to join this established, leading engineering solutions provider in the advanced manufacturing and process engineering industries. Key Responsibilities: Wiring of skid mounted equipment including valves, pumps, heaters and instrumentation. Fitting of skid mounted pneumatic equipment. Terminating cabling and pneumatics in control panels. Manufacturing of control panels, drilling and fitting control equipment to technical drawings. Wiring control panels to technical drawings. Setting up systems for testing using technical drawings Testing and commissioning of control systems Skills and Qualifications: Essential Practical electrical wiring experience of controls, panel and machine wiring. Ability to proficiently read and interpret electrical technical drawings and blueprints. Workshop technical skills (i.e., familiar with power tools, hand tools) Test, Fault Find and correct electrical faults on Panels and Skids. Confident handling a wide range of hand tools with precision and care. Full Driving Licence. Desirable: Electrical Qualifications. Experience PLC Hardware and HMI set ups. Experience in commissioning electrical panels and skids ready for client testing hand over. Understanding of basic to advanced fault finding. Demonstrate sound electrical knowledge with a proven track record in the field. Show enthusiasm and a willingness to learn new skills and technologies. Strong problem-solving skills with an attention to detail. Excellent career prospects with opportunities to develop your skills in process knowledge, PLC controls, and SCADA systems. Be part of a supportive, innovative, and forward-thinking company. HRGO Recruitment provides both permanent and temporary job opportunities across the UK. Applicants must have the right to work in the UK. HRGO is committed to equal opportunities for all.

Senior Project Manager - Advanced Automation Location - UK (Remote based with travel) Salary - Up to £90,000 pa + Car + Bonus + Extensive Package Sector - Advanced Automation & Industrial EngineeringAre you an experienced Project Manager with a strong background in automation? Do you thrive in high-technology environments delivering complex engineering projects across international clients and markets? This business is leading the way in their technology space!Our client is a global leader in advanced automation solutions, delivering cutting-edge design, installation, and commissioning services for high-profile manufacturing, industrial and FMCG clients. Due to continued growth and expansion across the UK, they are looking to appoint a Senior Project Manager to lead key customer automation projects from concept to completion. The Role: As a Senior Project Manager, you'll be responsible for end-to-end project delivery across multiple advanced automation design & installation projects. Working remotely from within the UK, you'll coordinate cross-functional teams and collaborate closely with clients to ensure projects are delivered on time, within scope, and to the highest standards of quality and safety. Key responsibilities: Lead complex automation projects across the UK and potentially Europe when required Manage project timelines, budgets, risks, and associated resources Liaise with internal engineering teams, subcontractors, and client stakeholders Oversee design, installation and commissioning phases on-site Ensure full compliance with safety standards and industry best practices Drive customer satisfaction through proactive communication and delivery excellence What We're Looking For: Proven experience managing high value automation or industrial engineering projects A strong understanding of automation technologies and systems (PLC, SCADA, robotics, WMS etc.) Background in manufacturing, logistics, process, 3PL or packaging sectors preferred Proven senior stakeholder management and communication skills Willingness to travel regularly across the UK and potentially Europe Strong commercial awareness and contract/project cost control expertise What's On Offer: Join a world-renowned automation business at the forefront of industrial innovation Remote-first role with true autonomy and flexibility High-impact and visible projects with blue-chip clients Competitive salary package with industry leading benefits and excellent career development opportunities in a business where the only limitation is your desire and drive. Apply now to lead where precision, performance and passion meet. Or reach out directly for a confidential conversation.This role is being managed exclusively by Lord Search & Selection so to apply in confidence and to initiate an informal discussion, please submit a fully CV online detailing your current remuneration package and availability quoting job reference 10258. Desired Skills and Experience: Automation, Robotics, PLC, Warehousing, 3PL, Logistics, Production, Manufacturing, Engineering, Industrial, Projects, Programmes, Program, Robotics

Electrical Installation Engineer Location: Hinckley Salary: £30,000 - £40,000 + Overtime (Sat 1.3x / Sun 1.5x) Hours: 37.5 hrs, Days 8:30-4:00 (flexi) Holidays: 23 days + bank holidays Benefits: Pool vans, Pension (3/5%), Flexi-time, Minimal weekend work About the Role We are looking for an experienced Electrical Installation Engineer to join our team working with major customers across the automotive, aerospace, and logistics sectors . This role involves installing, wiring, and commissioning automated machinery and control systems both in-house and on customer sites across the UK. You must be confident working independently-this is a role where you'll be expected to hit the ground running. Key Responsibilities Install control panels and associated equipment Install mains, 24V DC, and communication cabling Install cable containment systems Wire motors, sensors, and remote I/O nodes Carry out terminations of field cables into control panels Work with PLC, CNC, or PC-based control systems, AC servo drives, and inverter motor controllers Travel across the UK as required (overnight stays may be necessary) Experience & Qualifications Minimum 3 years' experience in a similar electrical installation role Strong understanding of electrical systems, components, and safety regulations Ability to read and interpret electrical drawings Experience with automated machinery, panel building, and installation NVQ / HNC preferred What We Offer Competitive salary + paid overtime Flexible working hours Company pool vans Pension scheme (3/5%) Minimal weekend work Why Join Us? This is a fantastic opportunity to become part of a skilled, growing team with clear progression possibilities. You'll work on modern automated systems for high-profile customers and be part of a company that values quality, independence, and technical excellence. Please contact kathryn.van-

Bedford Salary Negotiable DOE Monday - Friday Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an Automation Engineer with experience with PLC/HMI systems (Siemens S7 or Rockwell Control Logix) within an automated machinery environment. Offering a very competitive and negotiable package, with a wide range of benefits, this is an excellent time to join an expert in their field. Key Responsibilities & Duties: Carry out electrical engineering design and software development on machinery Carry out PLC commissioning and support global installations (4-5 trips/year) Collaborate across departments and liaise directly with customers Troubleshoot and resolve engineering issues Completion of the FAT document and 'as-built' electrical documentation. Assistance with engineering queries and manufacturing quality problems, as required. This is a summed-up list, and other responsibilities and duties will be required. Skills & Experience required: Experience in a similar role, within an automated machinery environment Experience with Siemens S7 and/or Rockwell Control Logix - Other experience will be accepted Ability to commission machinery Open to occasional international travel. Experience offering remote technical support. What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)