Process & Controls Engineer (Waste to Energy) £64,000 - £70,000 + Private Medical + Pension + 27 Days Holiday + Training + Free Parking Truro Are you a Process & Controls Engineer with strong experience in process optimisation, control systems specification, and safety analysis? Are you looking to join an innovative clean-energy business where you will play a key role in upgrading, refining, and im click apply for full job details
Dec 08, 2025
Full time
Process & Controls Engineer (Waste to Energy) £64,000 - £70,000 + Private Medical + Pension + 27 Days Holiday + Training + Free Parking Truro Are you a Process & Controls Engineer with strong experience in process optimisation, control systems specification, and safety analysis? Are you looking to join an innovative clean-energy business where you will play a key role in upgrading, refining, and im click apply for full job details
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
Dec 06, 2025
Full time
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document 'as-is' and 'to-be' metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. JBRP1_UKTJ
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Dec 04, 2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (e.g. ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Dec 04, 2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document "as-is" and "to-be" metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations.
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
Dec 04, 2025
Contractor
Metering Engineer Clearance required: BPSS Interview process: Tech IV Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: . Leads site-level technical coordination for metering deployments . Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) . Strong specialist in metering technologies, instrumentation, and automation . Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) . Oversees configuration, commissioning, and interface validation . Ensures cybersecurity compliance with the support of the Cyber SME in the central team . Drives robust coms integration . Manages site-level documentation, change control, and testing . Provides support to xxxx local teams . Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus . English speaker . Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Aligned with xxxx's values and expectations, the ideal candidate will demonstrate: Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
Dec 04, 2025
Contractor
We are a Global Recruitment specialist that provides support to the clients across EMEA, APAC, US and Canada Job Title: Metering Engineer Clearance required: BPSS Contract: 20 Months Location: Remote with travel at set milestones. IR35 Status: PAYE via Umbrella company only Job Description: Leads site-level technical coordination for metering deployments Participates to site surveys (so will travel a lot at the beginning) and assessments as OT technical expert (instrumentation + IT/OT integration) Strong specialist in metering technologies, instrumentation, and automation Designs and validates connectivity architecture (PLCs, SCADA, gateways, PME) Oversees configuration, commissioning, and interface validation Ensures cybersecurity compliance with the support of the Cyber SME in the central team Drives robust coms integration Manages site-level documentation, change control, and testing Provides support to xxxx local teams Experience in L&S, sustainability solutions and especially Schneider PME & RA is a plus English speaker Reports to Project managers in each Cluster (by Geo) and the lead architect in the central technical team Detailed job description from the client We are seeking a highly skilled and motivated Technical Engineer to lead the design and deployment of industrial utilities metering solutions across xxxx sites. In this pivotal role, you will be responsible for conducting site assessments, selecting appropriate meters, designing installation plans, and integrating metering systems with OT/IT infrastructure. You will also ensure all solutions comply with international standards. By enabling precise monitoring of energy and resources, you will directly contribute to THE CLIENT's sustainability objectives and drive operational excellence. Key Responsibilities Perform on-site assessments to evaluate infrastructure and feasibility for installing electricity, gas, diesel, water, and wastewater meters, addressing mechanical, electrical, civil considerations, and challenges like complex or limited pipe runs and retrofits. Analyze engineering documentation including process flow diagrams, P&IDs, and electrical single-line diagrams to identify optimal meter technologies, sizes, and installation points. Provide recommendations for metering solutions that adhere to xxxx's standards, including the appropriate selection of meter type, accuracy class, and communication protocols, based on a thorough assessment and consideration of installation complexities, hazardous areas, fluid characteristics, and physical parameters. Design and implement meter connectivity architecture by integrating with PLCs, gateways, SCADA systems, and Schneider PME platforms. Collaborate with site engineering and OT/IT teams to define network requirements and ensure compliance with cybersecurity and OT boundary controls. Provide technical input to OEMs and installation contractors, supporting procurement and commissioning activities. Document as-is and to-be metering configurations, maintaining traceable records of design decisions and lessons learned. Skills and Experience Degree or equivalent in Electrical, Instrumentation, Automation or Control Engineering. Proven experience in industrial utilities metering (electricity, gas, steam, water, wastewater), ideally within pharmaceutical or process manufacturing environments. Strong understanding of flow measurement principles and metering technologies. Deep knowledge of communication protocols including Modbus TCP/RTU, Ethernet/IP, RS-485, and pulse/analog signals. Familiarity with PLCs, gateways, SCADA systems, and PME integration. Ability to interpret technical drawings and produce structured documentation. Excellent communication and stakeholder engagement skills. Training in Hazardous Area Equipment selection and installation fundamentals. Experience with global projects and working knowledge of both local and international standards (eg ATEX, CSA). Skilled in handling large datasets, particularly for energy data verification Expected Deliverables Site Assessment Reports with metering gap analysis. Recommended Meter Specifications and Connectivity Designs. Meter Layout Drawings, Maintenance and Calibration guide. Bill of Materials (BoM) for procurement with clear outline of scopes. Technical validation input for cost estimation and vendor quotations. Behavioral Competencies Integrity & Transparency: Upholding high ethical standards and communicating openly. Respect & Inclusion: Supporting colleagues and embracing diverse perspectives. Accountability: Taking ownership and delivering on commitments. Courage & Development: Seeking innovation, learning from feedback, and adapting to change. Teamwork: Collaborating effectively across functions to achieve shared goals.
Description:We are seeking an apprentice trained Multi-disciplined Technician with a strong electrical bias to be responsible for all day to day maintenance activities at one of our customer locations in Leeds. The scope of your activities will consist of maintenance to boilers, refrigeration equipment, air handling systems, compressed air systems etc and all the auxiliary and ancillary plant used to support the continued successful delivery of our services to the customer. What you'll be doing:? Diagnosing and repairing faults on an extensive range of electrical/ mechanical equipment? Carry out Root Cause Analysis and play an active role in investigating recurring faults and engineering solutions.? Carrying out Planned preventative & reactive maintenance.? Identification and purchase of essential maintenance spares? Preparing procedures and risk assessment for maintenance tasks.? Planning and carrying out improvement projects? Supervision of maintenance sub-contractors? Carry out other reasonable tasks and duties as requested by management.? Work on all the sites Mechanical/ Electrical assets including pumps, motors, compressors. You will accurately record maintenance using a CMMS to help plan future maintenance activities.? Stock control of site maintenance spares.? To be aware of and work within company Health Safety and Environment and Quality systems.? Environmental reporting of incidents to line management What we're looking for:? A time served mechanical or electrical technician with proven experience in maintenance on a utilities plant or similar heavy industrial environment? ONC/ NQV Level 3 or City and Guilds qualified or other recognized certification by a recognised body? Strong health and safety knowledge? Detailed knowledge of plant and maintenance systems and their functionality, especially computer based.? Appropriate IT skills (confident use of Google,CMMS, email etc.)? Experienced in carrying out mechanical/ electrical maintenance in a industrial process environment such as waste to energy, power station, chemical, oil & gas, petrochemical or marine engineering? Knowledge of electrical systems & controls? Able to provide technical advice to other members? Able to supervise maintenance contractors when needed? Analytical ability and enthusiastic and competent problem solver with a practical approach to solving engineering problems.? Eager/ keen to develop own skills further Desirable:? Knowledge of Incineration and Power Generation or similar industry? General pipefitting & welding? Experience in carrying out maintenance on C&I assets including its DCS and associated PLC's control systems in a heavy industrial process environment? Working knowledge of pressure system regulation.
Oct 03, 2025
Full time
Description:We are seeking an apprentice trained Multi-disciplined Technician with a strong electrical bias to be responsible for all day to day maintenance activities at one of our customer locations in Leeds. The scope of your activities will consist of maintenance to boilers, refrigeration equipment, air handling systems, compressed air systems etc and all the auxiliary and ancillary plant used to support the continued successful delivery of our services to the customer. What you'll be doing:? Diagnosing and repairing faults on an extensive range of electrical/ mechanical equipment? Carry out Root Cause Analysis and play an active role in investigating recurring faults and engineering solutions.? Carrying out Planned preventative & reactive maintenance.? Identification and purchase of essential maintenance spares? Preparing procedures and risk assessment for maintenance tasks.? Planning and carrying out improvement projects? Supervision of maintenance sub-contractors? Carry out other reasonable tasks and duties as requested by management.? Work on all the sites Mechanical/ Electrical assets including pumps, motors, compressors. You will accurately record maintenance using a CMMS to help plan future maintenance activities.? Stock control of site maintenance spares.? To be aware of and work within company Health Safety and Environment and Quality systems.? Environmental reporting of incidents to line management What we're looking for:? A time served mechanical or electrical technician with proven experience in maintenance on a utilities plant or similar heavy industrial environment? ONC/ NQV Level 3 or City and Guilds qualified or other recognized certification by a recognised body? Strong health and safety knowledge? Detailed knowledge of plant and maintenance systems and their functionality, especially computer based.? Appropriate IT skills (confident use of Google,CMMS, email etc.)? Experienced in carrying out mechanical/ electrical maintenance in a industrial process environment such as waste to energy, power station, chemical, oil & gas, petrochemical or marine engineering? Knowledge of electrical systems & controls? Able to provide technical advice to other members? Able to supervise maintenance contractors when needed? Analytical ability and enthusiastic and competent problem solver with a practical approach to solving engineering problems.? Eager/ keen to develop own skills further Desirable:? Knowledge of Incineration and Power Generation or similar industry? General pipefitting & welding? Experience in carrying out maintenance on C&I assets including its DCS and associated PLC's control systems in a heavy industrial process environment? Working knowledge of pressure system regulation.
Astute's Power Team is partnered with a market leading energy company to recruit an Electrical, Controls and Instrumentation (EC&I) Technician for their Energy from Waste Power Station in Birmingham, West Midlands. The vital EC&I Technician role comes with a salary of 52,686 + Bonus + Overtime + benefits. If you're an Electrical, Controls and Instrumentation Technician and are looking to work for an organisation that puts integrity and people at the forefront of everything it does then upload your CV to apply today. Responsibilities and duties: Reporting to the Maintenance Engineer you will: Carrying out fault diagnosis, repairs, planned and unplanned maintenance activities on all EC&I assets to maximise plant availability including pressure, level, temperature and flow sensors and control systems (DCS, PLCs) and electrical equipment. Assisting during major maintenance periods, shutdowns, outages etc. when required to ensure maximum plant availability and efficiency. Working alongside other technicians in the maintenance team in diagnosing faults and assisting/suggesting equipment upgrades Maintaining accurate maintenance records using the site CMMS Supervising and directing on site contractors when required Working within the company health, safety and environmental processes and procedures at all times. Professional qualifications: We are looking for someone with the following: Ideally have at least an NVQ Level 3 in a relevant engineering discipline such as controls and instrumentation or electrical engineering. 17th / 18th Edition will be highly advantageous A formal health and safety qualification such as IOSH would be advantageous Experience, knowledge, and personal skills The EC&I Technician role would suit someone who has: Prior experience working in heavy process engineering environments such as Power (EfW, Biomass, CCGT, Coal, CHP, etc), Pharmaceutical, Chemicals, Steel Production, etc. Having prior experience working with steam generation equipment will be highly advantageous. Excellent technical knowledge of PLC, DCS, Instrumentation and some electrical systems Experience working with Computerised Maintenance Management Systems (CMMS) Salary and benefits of the EC&I Technician role: Basic salary of 52,686 Bonus Overtime Other excellent benefits Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Oct 03, 2025
Full time
Astute's Power Team is partnered with a market leading energy company to recruit an Electrical, Controls and Instrumentation (EC&I) Technician for their Energy from Waste Power Station in Birmingham, West Midlands. The vital EC&I Technician role comes with a salary of 52,686 + Bonus + Overtime + benefits. If you're an Electrical, Controls and Instrumentation Technician and are looking to work for an organisation that puts integrity and people at the forefront of everything it does then upload your CV to apply today. Responsibilities and duties: Reporting to the Maintenance Engineer you will: Carrying out fault diagnosis, repairs, planned and unplanned maintenance activities on all EC&I assets to maximise plant availability including pressure, level, temperature and flow sensors and control systems (DCS, PLCs) and electrical equipment. Assisting during major maintenance periods, shutdowns, outages etc. when required to ensure maximum plant availability and efficiency. Working alongside other technicians in the maintenance team in diagnosing faults and assisting/suggesting equipment upgrades Maintaining accurate maintenance records using the site CMMS Supervising and directing on site contractors when required Working within the company health, safety and environmental processes and procedures at all times. Professional qualifications: We are looking for someone with the following: Ideally have at least an NVQ Level 3 in a relevant engineering discipline such as controls and instrumentation or electrical engineering. 17th / 18th Edition will be highly advantageous A formal health and safety qualification such as IOSH would be advantageous Experience, knowledge, and personal skills The EC&I Technician role would suit someone who has: Prior experience working in heavy process engineering environments such as Power (EfW, Biomass, CCGT, Coal, CHP, etc), Pharmaceutical, Chemicals, Steel Production, etc. Having prior experience working with steam generation equipment will be highly advantageous. Excellent technical knowledge of PLC, DCS, Instrumentation and some electrical systems Experience working with Computerised Maintenance Management Systems (CMMS) Salary and benefits of the EC&I Technician role: Basic salary of 52,686 Bonus Overtime Other excellent benefits Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
EC&I Technician c£52,000 plus benefits Birmingham MC Technical Recruitment are partnered with a leading provider of energy from waste & are seeking an Electrical Controls & Instrumentation Technician to join their team. Working on a 40 hour week with no on call rota the EC&I Technician, the will carry out planned & preventative maintenance across this power generation facility based in Birmingham. As the EC&I Technician, you will be responsible for: Carrying out planned & reactive maintenance on electrical process plant PLC & controls fault diagnosis on rotating plant including fans & pumps Supporting during major maintenance periods such as shutdowns, outages etc Responding to breakdowns to ensure continuous operations Maintaining accurate records using the site CMMS Problem solve & assist the electrical engineer with site improvements Working on a days basis to support operations across the site Other duties as required To be considered for this role you should have: A relevant engineering qualified (HNC/NVQ/Apprenticeship etc.) Proven experience in EfW or relevant sector (Biomass / CCGT / energy from waste / Water) Experience troubleshooting, fault finding and rectifying problems on DCS, SCADA and PLCs Electrical maintenance experience on motors, switchgear, VSDs, control panels, etc. Knowledge of all Health, Safety & Environmental legislation and safe systems of work, RAMS, permit to work, etc. This is a permanent position based in Birmingham; due to the location of the plant, you will need a full UK driving licence to access the site. The package on offer for this position includes: c£52,000 Pension 25 days holidays plus BH Training & Development To Apply: If you are interested in this opportunity, please contact Matt George at MC Technical Recruitment with your CV or call on (phone number removed) for a confidential chat.
Oct 03, 2025
Full time
EC&I Technician c£52,000 plus benefits Birmingham MC Technical Recruitment are partnered with a leading provider of energy from waste & are seeking an Electrical Controls & Instrumentation Technician to join their team. Working on a 40 hour week with no on call rota the EC&I Technician, the will carry out planned & preventative maintenance across this power generation facility based in Birmingham. As the EC&I Technician, you will be responsible for: Carrying out planned & reactive maintenance on electrical process plant PLC & controls fault diagnosis on rotating plant including fans & pumps Supporting during major maintenance periods such as shutdowns, outages etc Responding to breakdowns to ensure continuous operations Maintaining accurate records using the site CMMS Problem solve & assist the electrical engineer with site improvements Working on a days basis to support operations across the site Other duties as required To be considered for this role you should have: A relevant engineering qualified (HNC/NVQ/Apprenticeship etc.) Proven experience in EfW or relevant sector (Biomass / CCGT / energy from waste / Water) Experience troubleshooting, fault finding and rectifying problems on DCS, SCADA and PLCs Electrical maintenance experience on motors, switchgear, VSDs, control panels, etc. Knowledge of all Health, Safety & Environmental legislation and safe systems of work, RAMS, permit to work, etc. This is a permanent position based in Birmingham; due to the location of the plant, you will need a full UK driving licence to access the site. The package on offer for this position includes: c£52,000 Pension 25 days holidays plus BH Training & Development To Apply: If you are interested in this opportunity, please contact Matt George at MC Technical Recruitment with your CV or call on (phone number removed) for a confidential chat.
NW32529 Project Manager 50,000 - 60,000 + Benefits Hertfordshir e Alecto Recruitment are partnering with a growing company within the Odour and emissions control sector who work closely with the Anaerobic Digestion, Waste Processing and Energy from Waste sectors. Main Job Roles: Conduct site surveys post-order, liaise with Pre-con team on design and access requirements. Confirm BOMs and material needs for procurement. Coordinate with sales on design, assuming design responsibility. Issue purchase orders and instruct RAMS with the PA, including client-required H&S documentation. Oversee project finances, ensuring budgets are met and maintained. Manage subcontractor schedules and day-to-day operations for up to 2-3 teams. Address client queries and assist with job commissioning and handover. Collaborate with the Project Assistant to prepare O&M manuals. Review and update processes, procedures, and documentation. Attend weekly project meetings, providing status updates. Support Aftersales by coordinating commissioning, service, and testing. Perform additional tasks to ensure timely, on-budget project completion. Key Role Requirements: Engineering, mechanical or Controls knowledge (any or all of) would be extremely useful Construction experience, working in a similar environment, would be necessary Excellent communication and written skills Good numerical skills Good IT skills & literacy, with working knowledge of Microsoft Outlook, Word & Excel Full valid UK driving licence You will be required to hold a CSCS and/or SKILLcard (The Company are able to support the obtaining of this, if required) Strong organisation and time management skills Personable, presentable and articulate Excellent budget control Ability to work within deadlines and cope under pressure Strong Management skills Excellent ability for interpretation of drawings INDW To apply for this role please send your CV to (url removed) call (phone number removed) ext 218 to discuss. Equally if this role would not be of interest to you but may be for a suitable friend or colleague, we can offer paid referral fees for successful placements.
Sep 24, 2025
Full time
NW32529 Project Manager 50,000 - 60,000 + Benefits Hertfordshir e Alecto Recruitment are partnering with a growing company within the Odour and emissions control sector who work closely with the Anaerobic Digestion, Waste Processing and Energy from Waste sectors. Main Job Roles: Conduct site surveys post-order, liaise with Pre-con team on design and access requirements. Confirm BOMs and material needs for procurement. Coordinate with sales on design, assuming design responsibility. Issue purchase orders and instruct RAMS with the PA, including client-required H&S documentation. Oversee project finances, ensuring budgets are met and maintained. Manage subcontractor schedules and day-to-day operations for up to 2-3 teams. Address client queries and assist with job commissioning and handover. Collaborate with the Project Assistant to prepare O&M manuals. Review and update processes, procedures, and documentation. Attend weekly project meetings, providing status updates. Support Aftersales by coordinating commissioning, service, and testing. Perform additional tasks to ensure timely, on-budget project completion. Key Role Requirements: Engineering, mechanical or Controls knowledge (any or all of) would be extremely useful Construction experience, working in a similar environment, would be necessary Excellent communication and written skills Good numerical skills Good IT skills & literacy, with working knowledge of Microsoft Outlook, Word & Excel Full valid UK driving licence You will be required to hold a CSCS and/or SKILLcard (The Company are able to support the obtaining of this, if required) Strong organisation and time management skills Personable, presentable and articulate Excellent budget control Ability to work within deadlines and cope under pressure Strong Management skills Excellent ability for interpretation of drawings INDW To apply for this role please send your CV to (url removed) call (phone number removed) ext 218 to discuss. Equally if this role would not be of interest to you but may be for a suitable friend or colleague, we can offer paid referral fees for successful placements.
