CCTV Drainage Engineer Natta Building Company Ltd is seeking an experienced CCTV Drainage Engineer to join our utilities and drainage division, supporting ongoing projects across the South East. This is a site-based role, working closely with site teams to assess drainage systems, gather CCTV footage after cleaning, and provide clear recommendations on repair options. You will operate top-of-the-range Rioned CityJet jetters to clean lines prior to inspection and will convert all captured footage into professional, high-quality reports using Viewline software. Essential Requirements • Minimum 2+ years CCTV drainage experience • Proven No-Dig repair experience pipe lining and patching is essential • Strong working knowledge of Viewline (or equivalent) for professional report writing • Experience operating jetting equipment, ideally Rioned units • Ability to work site-based, capturing CCTV footage after jetting and delivering accurate findings • Confident working with site teams and offering clear repair advice • Full UK clean driving licence • Excellent attention to detail and high communication standards • Ability to work independently and meet strict deadlines • CSCS card • Confined Space Entry CP2 or equivalent • Right to work in the UK Desirable Requirements • MSCC5 coding experience/qualification • Experience using Minicam CCTV equipment • Minor groundwork or excavation experience • High-pressure water jetting certification • Strong time-management and organisational skills • Willingness to undertake any other reasonable duties What We Offer • Full-time: Mon Fri, 7:30am 5:30pm (47.5 hours/week + overtime at 10%) • Long-term career prospects with a stable and reputable company • Extensive training and development opportunities • Salary-sacrifice pension scheme • 20 days holiday + 8 Bank Holidays (including Christmas shutdown) • Company van + fuel card • Work alongside industry specialists with over 45 years of continuous trading • Wellbeing initiatives and employee support About Natta We are committed to developing our people and promoting from within. Our teams support each other, share knowledge, and push for high standards across every project. We value equality, diversity, and fairness in all recruitment and employment practices. In order to promote an environment within which the Company can call upon the widest range of knowledge, skills and experience, as well as ensuring compliance with the relevant legislation and codes of practice, we are committed to treating all applicants and employees in the same way regardless of race or colour, nationality or national or ethnic origin, religion or religious belief, sex or marital status, sexual orientation, disability or age. No recruitment agencies please we respectfully request that recruitment agencies refrain from submitting speculative CV s or from making contact outside of the relationships currently in existence. Speculative CVs that are still sent across will not be considered.
Dec 13, 2025
Full time
CCTV Drainage Engineer Natta Building Company Ltd is seeking an experienced CCTV Drainage Engineer to join our utilities and drainage division, supporting ongoing projects across the South East. This is a site-based role, working closely with site teams to assess drainage systems, gather CCTV footage after cleaning, and provide clear recommendations on repair options. You will operate top-of-the-range Rioned CityJet jetters to clean lines prior to inspection and will convert all captured footage into professional, high-quality reports using Viewline software. Essential Requirements • Minimum 2+ years CCTV drainage experience • Proven No-Dig repair experience pipe lining and patching is essential • Strong working knowledge of Viewline (or equivalent) for professional report writing • Experience operating jetting equipment, ideally Rioned units • Ability to work site-based, capturing CCTV footage after jetting and delivering accurate findings • Confident working with site teams and offering clear repair advice • Full UK clean driving licence • Excellent attention to detail and high communication standards • Ability to work independently and meet strict deadlines • CSCS card • Confined Space Entry CP2 or equivalent • Right to work in the UK Desirable Requirements • MSCC5 coding experience/qualification • Experience using Minicam CCTV equipment • Minor groundwork or excavation experience • High-pressure water jetting certification • Strong time-management and organisational skills • Willingness to undertake any other reasonable duties What We Offer • Full-time: Mon Fri, 7:30am 5:30pm (47.5 hours/week + overtime at 10%) • Long-term career prospects with a stable and reputable company • Extensive training and development opportunities • Salary-sacrifice pension scheme • 20 days holiday + 8 Bank Holidays (including Christmas shutdown) • Company van + fuel card • Work alongside industry specialists with over 45 years of continuous trading • Wellbeing initiatives and employee support About Natta We are committed to developing our people and promoting from within. Our teams support each other, share knowledge, and push for high standards across every project. We value equality, diversity, and fairness in all recruitment and employment practices. In order to promote an environment within which the Company can call upon the widest range of knowledge, skills and experience, as well as ensuring compliance with the relevant legislation and codes of practice, we are committed to treating all applicants and employees in the same way regardless of race or colour, nationality or national or ethnic origin, religion or religious belief, sex or marital status, sexual orientation, disability or age. No recruitment agencies please we respectfully request that recruitment agencies refrain from submitting speculative CV s or from making contact outside of the relationships currently in existence. Speculative CVs that are still sent across will not be considered.
At Conexus, we're not just building a company - we're developing careers. Every team member receives tailored training, ongoing coaching, and the support needed to become the very best version of themselves. You'll work with some of the world's most recognisable global brands across cutting-edge technology markets. About Us Conexus is an international specialist recruitment organisation focused on delivering top-tier talent across: SAP Salesforce Data & Analytics Software Engineering Cyber Security With ambitious growth plans, we are expanding our teams and looking for experienced recruiters who want to build something special with us. The Role We are looking for experienced SAP Recruitment Consultants to help drive the growth of our SAP desks across Europe. Key Responsibilities: Develop and grow existing client accounts - both operationally and strategically Proactively acquire new clients and build long-term relationships Become a trusted advisor to your clients by offering up-to-date market insights Manage the full 360 recruitment process: business development, job qualification, candidate sourcing, negotiation, and placement Deliver outstanding service to both clients and candidates Collaborate effectively with internal and external stakeholders Skills & Experience Required 4+ years of SAP recruitment experience Self-motivated with the ability to work both independently and as part of a team A proactive and resilient mindset Eagerness to learn and grow Excellent written and verbal communication skills International recruitment experience Experience working with multinational clients What Makes Conexus Different? Flexible working hours 100% remote working opportunities Transparent and structured career progression Opportunities to work with world-leading brands International business travel Amazing benefits package If you're ambitious, driven, and ready to elevate your recruitment career with a business that genuinely invests in your growth, we'd love to hear from you. Apply now by sending your CV to take the next step in your journey with Conexus. JBRP1_UKTJ
Dec 13, 2025
Full time
At Conexus, we're not just building a company - we're developing careers. Every team member receives tailored training, ongoing coaching, and the support needed to become the very best version of themselves. You'll work with some of the world's most recognisable global brands across cutting-edge technology markets. About Us Conexus is an international specialist recruitment organisation focused on delivering top-tier talent across: SAP Salesforce Data & Analytics Software Engineering Cyber Security With ambitious growth plans, we are expanding our teams and looking for experienced recruiters who want to build something special with us. The Role We are looking for experienced SAP Recruitment Consultants to help drive the growth of our SAP desks across Europe. Key Responsibilities: Develop and grow existing client accounts - both operationally and strategically Proactively acquire new clients and build long-term relationships Become a trusted advisor to your clients by offering up-to-date market insights Manage the full 360 recruitment process: business development, job qualification, candidate sourcing, negotiation, and placement Deliver outstanding service to both clients and candidates Collaborate effectively with internal and external stakeholders Skills & Experience Required 4+ years of SAP recruitment experience Self-motivated with the ability to work both independently and as part of a team A proactive and resilient mindset Eagerness to learn and grow Excellent written and verbal communication skills International recruitment experience Experience working with multinational clients What Makes Conexus Different? Flexible working hours 100% remote working opportunities Transparent and structured career progression Opportunities to work with world-leading brands International business travel Amazing benefits package If you're ambitious, driven, and ready to elevate your recruitment career with a business that genuinely invests in your growth, we'd love to hear from you. Apply now by sending your CV to take the next step in your journey with Conexus. JBRP1_UKTJ
Manufacturing Engineer 5 month contract Based in Ampthill Offering 35ph Inside IR35 Do you have experience with MRP systems and managing BOMs? Do you have experience with CAD software for generating 2D technical drawings? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing basis of estimates for engineering activities and shop floor operations Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOMs/routings Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and the generation/update of relevant documentation Your skillset may include: Detailed Assembly Processing knowledge (Electro-Mechanical, Bonding, etc ) Knowledge of Lean Manufacturing, Six Sigma, and quality improvement tools Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems Experience managing BOMs and routings in SAP (or similar ERP systems) A collaborative mindset with a passion for continuous improvement Composite processing knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Engineer 5 month contract Based in Ampthill Offering 35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Dec 13, 2025
Contractor
Manufacturing Engineer 5 month contract Based in Ampthill Offering 35ph Inside IR35 Do you have experience with MRP systems and managing BOMs? Do you have experience with CAD software for generating 2D technical drawings? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing basis of estimates for engineering activities and shop floor operations Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOMs/routings Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and the generation/update of relevant documentation Your skillset may include: Detailed Assembly Processing knowledge (Electro-Mechanical, Bonding, etc ) Knowledge of Lean Manufacturing, Six Sigma, and quality improvement tools Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems Experience managing BOMs and routings in SAP (or similar ERP systems) A collaborative mindset with a passion for continuous improvement Composite processing knowledge If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Manufacturing Engineer 5 month contract Based in Ampthill Offering 35ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Legal and Compliance Officer - FTC Based in Luton, as the Legal & Contracts (L&C) Officer on a 6-month FTC, you will work closely with the Head of L&C or another designated person to help our client navigate and manage commercial risks through their contracts, mainly in the defence and space sectors. You will provide clear and timely legal guidance and advice to their sales, projects and functional managers as well as handle agreements with their service suppliers. You will also ensure our client remains compliant with national laws and company/Group policies, monitoring for any changes so our client can update their policies and procedures as needed. This role reports directly to the Head of L&C and you would be joining a small, friendly, and collaborative team. Key Responsibilities: - Legal and Contractual Expertise: Provide legal advice and manage contracts. - Risk Management: Identify and mitigate contractual risks. - Compliance: Ensure adherence to legal requirements and directives. - Negotiation: Negotiate contracts and resolve disputes. - Partnerships: Structure and manage collaborations. - Proposal Development: Handle terms for new business proposals. - Records Management: Maintain contract records. - Collaboration: Work with Telespazio colleagues for consistency. - Meeting Participation: Attend key business meetings. - Relationship Management: Maintain client and supplier relationships. Qualifications: - Experience: 5+ years in commercial legal and contracts departments reviewing / drafting of prime contracts, subcontracts, NDAs, framework agreements. Experience in downstream and upstream flow down of contractual terms in medium or/and large projects. - Leadership: Strong relationship builder and communicator with team leadership experience. - Independence: Ability to work independently and manage change effectively. - Communication: Excellent interpersonal, communication, reporting, and presentation skills. - Integrity: Proven integrity and ability to handle pressure. - Trust: Ability to earn respect and trust from staff and external stakeholders. Nice to have - Experience in space and/or defence industries, IPR, software licensing T&Cs Please note that SC maybe required and therefore only UK nationals/previously cleared personnel should apply. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Dec 13, 2025
Contractor
Legal and Compliance Officer - FTC Based in Luton, as the Legal & Contracts (L&C) Officer on a 6-month FTC, you will work closely with the Head of L&C or another designated person to help our client navigate and manage commercial risks through their contracts, mainly in the defence and space sectors. You will provide clear and timely legal guidance and advice to their sales, projects and functional managers as well as handle agreements with their service suppliers. You will also ensure our client remains compliant with national laws and company/Group policies, monitoring for any changes so our client can update their policies and procedures as needed. This role reports directly to the Head of L&C and you would be joining a small, friendly, and collaborative team. Key Responsibilities: - Legal and Contractual Expertise: Provide legal advice and manage contracts. - Risk Management: Identify and mitigate contractual risks. - Compliance: Ensure adherence to legal requirements and directives. - Negotiation: Negotiate contracts and resolve disputes. - Partnerships: Structure and manage collaborations. - Proposal Development: Handle terms for new business proposals. - Records Management: Maintain contract records. - Collaboration: Work with Telespazio colleagues for consistency. - Meeting Participation: Attend key business meetings. - Relationship Management: Maintain client and supplier relationships. Qualifications: - Experience: 5+ years in commercial legal and contracts departments reviewing / drafting of prime contracts, subcontracts, NDAs, framework agreements. Experience in downstream and upstream flow down of contractual terms in medium or/and large projects. - Leadership: Strong relationship builder and communicator with team leadership experience. - Independence: Ability to work independently and manage change effectively. - Communication: Excellent interpersonal, communication, reporting, and presentation skills. - Integrity: Proven integrity and ability to handle pressure. - Trust: Ability to earn respect and trust from staff and external stakeholders. Nice to have - Experience in space and/or defence industries, IPR, software licensing T&Cs Please note that SC maybe required and therefore only UK nationals/previously cleared personnel should apply. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
IR35: Inside Our client has a requirement for a Civil Engineer, who will be required to work on a contract basis across the UK, supporting small- to medium-scale building and infrastructure projects. The role offers a flexible working approach with hybrid and remote options. Role Purpose: To contribute to the delivery of technically focused civil engineering designs, ensuring high-quality outcomes across building and infrastructure projects. The role involves design and analysis of drainage, utilities, pavements, earthworks, and access, as well as collaboration with a multi-disciplinary design team. This position provides the opportunity to develop skills in civil structures, drainage design, utilities, and pavement design. Job Role Responsibilities: Deliver designs for small- to medium-scale building and infrastructure projects in accordance with UK standards and codes Design and analyse drainage systems, utilities, paved/unpaved surfaces, earthworks, access, and construction logistics Collaborate effectively with multi-disciplinary design teams Comply with Quality and Technical Assurance Procedures Work in line with BIM standards, Digital Plan of Work, and project BIM Execution Plan Manage own workload efficiently Experience / Skills / Knowledge / Qualifications: Essential: 5+ years experience as a Civil Engineer, ideally in building projects Drainage design experience (Infodrainage or Flow software) Roads and car park design experience Proficient in Civil 3D and AutoCAD; Revit BIM 360 desirable Working towards ICE chartership Familiarity with UK design standards and best practices Strong verbal and written communication skills Ability to work independently and in multi-disciplinary teams Embrace digital engineering, automation, and parametric design Desirable: SC clearance or ability to achieve Driving licence Experience dealing with statutory approvals with regulators Experience on small-scale building projects ICE Chartered status Company Information: At First Recruitment Group, we understand how important it is to secure the right people. Our Recruitment Consultants take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels, and this is a superb opportunity for a Civil Engineer looking for new employment.
Dec 13, 2025
Contractor
IR35: Inside Our client has a requirement for a Civil Engineer, who will be required to work on a contract basis across the UK, supporting small- to medium-scale building and infrastructure projects. The role offers a flexible working approach with hybrid and remote options. Role Purpose: To contribute to the delivery of technically focused civil engineering designs, ensuring high-quality outcomes across building and infrastructure projects. The role involves design and analysis of drainage, utilities, pavements, earthworks, and access, as well as collaboration with a multi-disciplinary design team. This position provides the opportunity to develop skills in civil structures, drainage design, utilities, and pavement design. Job Role Responsibilities: Deliver designs for small- to medium-scale building and infrastructure projects in accordance with UK standards and codes Design and analyse drainage systems, utilities, paved/unpaved surfaces, earthworks, access, and construction logistics Collaborate effectively with multi-disciplinary design teams Comply with Quality and Technical Assurance Procedures Work in line with BIM standards, Digital Plan of Work, and project BIM Execution Plan Manage own workload efficiently Experience / Skills / Knowledge / Qualifications: Essential: 5+ years experience as a Civil Engineer, ideally in building projects Drainage design experience (Infodrainage or Flow software) Roads and car park design experience Proficient in Civil 3D and AutoCAD; Revit BIM 360 desirable Working towards ICE chartership Familiarity with UK design standards and best practices Strong verbal and written communication skills Ability to work independently and in multi-disciplinary teams Embrace digital engineering, automation, and parametric design Desirable: SC clearance or ability to achieve Driving licence Experience dealing with statutory approvals with regulators Experience on small-scale building projects ICE Chartered status Company Information: At First Recruitment Group, we understand how important it is to secure the right people. Our Recruitment Consultants take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels, and this is a superb opportunity for a Civil Engineer looking for new employment.
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
Dec 13, 2025
Full time
Fendt-Krone Agricultural Technician Location : Llanwrda, Carmarthenshire Job Type : Full-time, Permanent Arwel's Agri Services is a leading agricultural machinery dealer in West Wales covering Ceredigion ,Carmarthenshire and the Pembrokeshire regions, representing world-class brands including Fendt and Krone. We are seeking an experienced and motivated Agricultural Technician to join our dedicated workshop team. You will be responsible for the servicing, maintenance, and repair of a diverse range of high-tech agricultural machinery, including Fendt tractors and Krone forage and baling equipment. Key responsibilities Diagnostics and repair: Perform advanced diagnostics, servicing, and repairs on Fendt and Krone machinery, including tractors, combines, balers, and forage harvesters. Mechanical and electrical work: Troubleshoot and fix complex mechanical, electrical, and hydraulic faults using specialized equipment and manufacturer software. Routine maintenance: Conduct routine inspections and preventative maintenance to ensure optimal machine performance. Pre-delivery inspections (PDI): Assemble and perform PDI on new machinery before it is delivered to customers. Field service: Travel to customer sites for on-farm service and repairs, particularly during peak seasons. Customer support: Provide professional and knowledgeable technical support to customers. Training and development: Stay up-to-date with product advancements and technological innovations by attending manufacturer-specific training sessions. Record-keeping: Maintain accurate and detailed records of all work performed. Skills and qualifications Proven experience as an Agricultural Technician or Service Engineer, with specific knowledge of Fendt and Krone equipment preferred but not essential as full manufacturers training will be provided. Strong technical knowledge of mechanical, electrical, and hydraulic systems. Excellent diagnostic and problem-solving skills. Ability to work independently and manage your own workload effectively. A professional and flexible approach, with the willingness to work extended hours during peak seasons. Strong communication and customer service skills. A full UK driving license is essential. What we offer A very competitive salary based on experience. Comprehensive manufacturer-specific training to further your career. Opportunity to work with cutting-edge, high-tech agricultural machinery. A supportive and rewarding team environment. Company Pension / Company vehicle for field service. How to apply: If you have a passion for agricultural machinery and the skills to succeed in this role, please send your CV and a covering letter to You can also apply for this role by clicking the Apply Button.
Security Installation Engineer - Runcorn DCS Recruitment currently seek an established physical security installation engineer to join a specialist IT network engineering and design client based in Runcorn. Overview Delivering comprehensive end-to-end network and IP security solutions. With a team of highly experienced solutions architects, they design and build and maintain infrastructure and IP security systems. Our commitment lies in providing innovative, tailored solutions that meet client needs and uphold the highest standards of performance and reliability. Full-time HYBRID role primarily field-based at customer sites, with flexibility to work from the office or home when required. The successful candidate will play a key role in: Installing, configuring, and maintaining advanced security systems Conducting site assessments and preparing technical documentation Troubleshooting and resolving technical issues Providing ongoing support and maintenance services Collaborating closely with clients and internal teams to ensure successful project delivery within agreed timelines and quality standards Key Responsibilities Security system installation: IP CCTV, access control, alarms, and related infrastructure System configuration & integration: Hardware/software setup and network connectivity Site assessments: Evaluate client environments and recommend tailored solutions Technical troubleshooting: Diagnose and resolve system faults efficiently Maintenance & support: Deliver proactive servicing and client support Collaboration: Work with cross-functional teams to ensure seamless deployments Compliance & safety: Adhere to industry standards, health & safety regulations, and company policies Qualifications & Skills Proficiency in security installation, site assessments, and system configuration Strong technical expertise in troubleshooting, system maintenance, and hardware/software integration Solid understanding of IT networks, systems administration, and security protocols Experience with network cable installation & fibre splicing Excellent communication skills and ability to collaborate with clients and teams Attention to detail, problem-solving mindset, and proactive attitude Relevant certifications (e.g., manufacturer training, security systems) advantageous ECS Card required IPAF and PASMA certifications advantageous Full UK Driver's License and willingness to travel to client sites Benefits Competitive salary package Choice of hybrid/electric Car, Van or Vehicle allowance Hybrid working flexibility Opportunities for professional development and certification Exposure to cutting-edge security technologies Supportive team culture with career growth potential Apply online for a call back or call DCS Recruitment on (phone number removed) (option 2) to discuss further. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Dec 13, 2025
Full time
Security Installation Engineer - Runcorn DCS Recruitment currently seek an established physical security installation engineer to join a specialist IT network engineering and design client based in Runcorn. Overview Delivering comprehensive end-to-end network and IP security solutions. With a team of highly experienced solutions architects, they design and build and maintain infrastructure and IP security systems. Our commitment lies in providing innovative, tailored solutions that meet client needs and uphold the highest standards of performance and reliability. Full-time HYBRID role primarily field-based at customer sites, with flexibility to work from the office or home when required. The successful candidate will play a key role in: Installing, configuring, and maintaining advanced security systems Conducting site assessments and preparing technical documentation Troubleshooting and resolving technical issues Providing ongoing support and maintenance services Collaborating closely with clients and internal teams to ensure successful project delivery within agreed timelines and quality standards Key Responsibilities Security system installation: IP CCTV, access control, alarms, and related infrastructure System configuration & integration: Hardware/software setup and network connectivity Site assessments: Evaluate client environments and recommend tailored solutions Technical troubleshooting: Diagnose and resolve system faults efficiently Maintenance & support: Deliver proactive servicing and client support Collaboration: Work with cross-functional teams to ensure seamless deployments Compliance & safety: Adhere to industry standards, health & safety regulations, and company policies Qualifications & Skills Proficiency in security installation, site assessments, and system configuration Strong technical expertise in troubleshooting, system maintenance, and hardware/software integration Solid understanding of IT networks, systems administration, and security protocols Experience with network cable installation & fibre splicing Excellent communication skills and ability to collaborate with clients and teams Attention to detail, problem-solving mindset, and proactive attitude Relevant certifications (e.g., manufacturer training, security systems) advantageous ECS Card required IPAF and PASMA certifications advantageous Full UK Driver's License and willingness to travel to client sites Benefits Competitive salary package Choice of hybrid/electric Car, Van or Vehicle allowance Hybrid working flexibility Opportunities for professional development and certification Exposure to cutting-edge security technologies Supportive team culture with career growth potential Apply online for a call back or call DCS Recruitment on (phone number removed) (option 2) to discuss further. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Join the Team That's Shaping the Future of Radar Technology! Are you excited by the idea of transforming complex signals into game-changing insights? Do you thrive in the world where cutting-edge algorithms meet advanced engineering? This is your opportunity to step into a high-impact role at the forefront of next-generation radar innovation. We're searching for a passionate Radar Systems Analyst & Designer to join an elite R&D environment, where your ideas won't just be heard-they'll help define the future of sensing technology. What You'll Do In this role, you'll be a key force behind the analysis, design, and evolution of advanced radar systems. You'll work across the full innovation lifecycle-from blue-sky concepts to real-world trials-collaborating with brilliant minds and industry specialists. Your mission: Create sophisticated mathematical models of radar systems and sub-systems using tools like MATLAB, Simulink, and Mathcad. Develop groundbreaking radar system concepts and digital signal processing algorithms. Translate complex analyses into high-quality design data that guides hardware and software development. Validate hardware and software, ensuring real-world performance meets exacting standards. Produce detailed technical specifications that drive the development of next-generation equipment. Dive deep into radar performance, including data from live trials, and deliver clear reports to both internal teams and external partners. Collaborate with international suppliers to ensure every component meets world-class performance criteria. Present your cutting-edge work to customers and technical audiences. Lead major contributions to new radar system architectures and capabilities. Travel across the UK and abroad, sometimes at short notice, to support trials, collaboration, and customer engagement. If you're driven by innovation, exploration, and real engineering impact, you'll thrive here. What You Bring (Essential) A Bachelor's or Master's degree from a reputable university. Strong experience in MATLAB and digital signal processing. Knowledge of radar, or related fields such as sonar, communications, or image processing. A proven ability to deliver high-quality design and analysis on time and within budget. Self-motivation, curiosity, and a collaborative spirit. Excellent written and verbal communication skills. Bonus skills (Desirable) Expertise in any of the following will make you stand out: Pulse Compression, Doppler Filtering, CFAR, Detection Radar video, image processing, tracking, or plot extraction Phased array radar technologies Embedded software, Linux, FPGA development RF systems, antennas, radar electronics Systems engineering or a research-driven background (papers, patents, academic experience) Hands-on experience in hardware testing and debugging Familiarity with git, JIRA, or similar tools Additional programming languages (Python, C/C++, etc.) Why This Role Is Exceptional You won't just be another engineer, you'll be a key contributor to transformative radar technology with real-world impact. This is a place where innovation moves fast, curiosity is rewarded, and every day brings new technical challenges worth solving. If you're ready to push boundaries and elevate your career in advanced sensing systems, Apply now, and help build the radar systems of tomorrow.
Dec 13, 2025
Full time
Join the Team That's Shaping the Future of Radar Technology! Are you excited by the idea of transforming complex signals into game-changing insights? Do you thrive in the world where cutting-edge algorithms meet advanced engineering? This is your opportunity to step into a high-impact role at the forefront of next-generation radar innovation. We're searching for a passionate Radar Systems Analyst & Designer to join an elite R&D environment, where your ideas won't just be heard-they'll help define the future of sensing technology. What You'll Do In this role, you'll be a key force behind the analysis, design, and evolution of advanced radar systems. You'll work across the full innovation lifecycle-from blue-sky concepts to real-world trials-collaborating with brilliant minds and industry specialists. Your mission: Create sophisticated mathematical models of radar systems and sub-systems using tools like MATLAB, Simulink, and Mathcad. Develop groundbreaking radar system concepts and digital signal processing algorithms. Translate complex analyses into high-quality design data that guides hardware and software development. Validate hardware and software, ensuring real-world performance meets exacting standards. Produce detailed technical specifications that drive the development of next-generation equipment. Dive deep into radar performance, including data from live trials, and deliver clear reports to both internal teams and external partners. Collaborate with international suppliers to ensure every component meets world-class performance criteria. Present your cutting-edge work to customers and technical audiences. Lead major contributions to new radar system architectures and capabilities. Travel across the UK and abroad, sometimes at short notice, to support trials, collaboration, and customer engagement. If you're driven by innovation, exploration, and real engineering impact, you'll thrive here. What You Bring (Essential) A Bachelor's or Master's degree from a reputable university. Strong experience in MATLAB and digital signal processing. Knowledge of radar, or related fields such as sonar, communications, or image processing. A proven ability to deliver high-quality design and analysis on time and within budget. Self-motivation, curiosity, and a collaborative spirit. Excellent written and verbal communication skills. Bonus skills (Desirable) Expertise in any of the following will make you stand out: Pulse Compression, Doppler Filtering, CFAR, Detection Radar video, image processing, tracking, or plot extraction Phased array radar technologies Embedded software, Linux, FPGA development RF systems, antennas, radar electronics Systems engineering or a research-driven background (papers, patents, academic experience) Hands-on experience in hardware testing and debugging Familiarity with git, JIRA, or similar tools Additional programming languages (Python, C/C++, etc.) Why This Role Is Exceptional You won't just be another engineer, you'll be a key contributor to transformative radar technology with real-world impact. This is a place where innovation moves fast, curiosity is rewarded, and every day brings new technical challenges worth solving. If you're ready to push boundaries and elevate your career in advanced sensing systems, Apply now, and help build the radar systems of tomorrow.
Location: Barnoldswick, United Kingdom Salary: GBP up to 40,000 (dependent on qualification and experience) About BUOYANCY AEROSPACE Enabling the free world's leading aerospace, space, and defense institutions. BUOYANCY AEROSPACE was founded in 2022 to meet the rising demand for solutions in aerospace, space, and defense-markets underserved by a dysfunctional supply chain. We attract the most capable talent with integrity and build and leverage generative AI for digital and physical solutions. We are proud to contribute significantly to the most prestigious and complex aerospace, space, and defense platforms-some under confidential mandates. We are not a company of promises. With active production facilities in the UK and Germany and a growing workforce of currently >150 employees, we are scaling rapidly, but already delivering to our customers. Our culture is highly purpose-driven, constantly delivering innovation, exceptional standards, execution. This is a high-performance environment. If you seek meaningful work at the intersection of technology and defense, this is the place for you. Those looking for the comfort of a standard role are discouraged from applying. The Role: CMM Programmer We are seeking an CMM Programmer for BUOYANCY AEROSPACE V1 Ltd , based in Barnoldswick. This permanent position calls for a detail-oriented and proactive individual to develop and execute precise measurement programs, ensuring top-notch quality in a dynamic aerospace environment. Key Responsibilities: Metrology Process Optimization: Create best practice programming. Leverage PC-DMIS software to streamline measurement workflows and enhance data analysis capabilities. Utilize advanced knowledge of first principal inspection techniques to optimize metrology processes and ensure the highest level of accuracy and efficiency. Equipment Management and Utilization: Oversee the operation and maintenance of recently acquired CMMs, maximizing their potential to meet and exceed quality standards. Develop and implement best practices for equipment utilization, calibration, and upkeep. Nesting Solution Design and Implementation: Design and implement a cutting-edge nesting solution for parts, optimizing material usage and production efficiency. Develop quick-load mechanisms to streamline the loading and unloading process, minimizing downtime and increasing throughput. Quality Assurance and Compliance: Ensure compliance with all relevant quality standards, regulations, and industry best practices. Implement robust quality control measures to identify and address any deviations or discrepancies in measurement data. Cross-functional Collaboration: Collaborate closely with engineering, production, and quality assurance teams to support product development and manufacturing processes. Act as a subject matter expert on metrology-related matters, providing guidance and support as needed. Required Qualifications Extensive experience (3+ years) in metrology, particularly within the aerospace industry. Proficiency in operating and programming Coordinate Measuring Machines (CMM), preferably with experience using PC-DMIS software. Strong understanding of first principal inspection techniques and metrology best practices. Proven leadership experience, with the ability to inspire and motivate teams to achieve exceptional results. Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Would be welcomed but not essential. Excellent analytical skills and attention to detail, with a focus on continuous improvement. Strong communication and interpersonal skills, with the ability to effectively collaborate across different teams and departments. We expect the highest possible standards of motivation and work ethics, a clear commitment to our company values of purpose, excellence, innovation, and team culture. What We Offer Strategic Impact: Shape critical operational processes and establish a legacy of excellence in a rapidly scaling organization. Prestige and Innovation: Work on high-stakes projects that define the future of aerospace, space, and defense. Meritocratic Culture: Join an organization where excellence, integrity, and results are the foundation of everything we do. _BUOYANCY AEROSPACE V1 Ltd. is an equal opportunity employer; employment with us is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, colour, religion, age, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status._ Job Type: Full-time Pay: £35,000.00-£40,000.00 per year Benefits: Canteen Company events Free parking On-site parking Referral programme Ability to commute/relocate: Barnoldswick BB18 6DX: reliably commute or plan to relocate before starting work (required) Experience: Aerospace: 2 years (required) PC-DMIS: 2 years (required) Work authorisation: United Kingdom (required) Work Location: In person
Dec 13, 2025
Full time
Location: Barnoldswick, United Kingdom Salary: GBP up to 40,000 (dependent on qualification and experience) About BUOYANCY AEROSPACE Enabling the free world's leading aerospace, space, and defense institutions. BUOYANCY AEROSPACE was founded in 2022 to meet the rising demand for solutions in aerospace, space, and defense-markets underserved by a dysfunctional supply chain. We attract the most capable talent with integrity and build and leverage generative AI for digital and physical solutions. We are proud to contribute significantly to the most prestigious and complex aerospace, space, and defense platforms-some under confidential mandates. We are not a company of promises. With active production facilities in the UK and Germany and a growing workforce of currently >150 employees, we are scaling rapidly, but already delivering to our customers. Our culture is highly purpose-driven, constantly delivering innovation, exceptional standards, execution. This is a high-performance environment. If you seek meaningful work at the intersection of technology and defense, this is the place for you. Those looking for the comfort of a standard role are discouraged from applying. The Role: CMM Programmer We are seeking an CMM Programmer for BUOYANCY AEROSPACE V1 Ltd , based in Barnoldswick. This permanent position calls for a detail-oriented and proactive individual to develop and execute precise measurement programs, ensuring top-notch quality in a dynamic aerospace environment. Key Responsibilities: Metrology Process Optimization: Create best practice programming. Leverage PC-DMIS software to streamline measurement workflows and enhance data analysis capabilities. Utilize advanced knowledge of first principal inspection techniques to optimize metrology processes and ensure the highest level of accuracy and efficiency. Equipment Management and Utilization: Oversee the operation and maintenance of recently acquired CMMs, maximizing their potential to meet and exceed quality standards. Develop and implement best practices for equipment utilization, calibration, and upkeep. Nesting Solution Design and Implementation: Design and implement a cutting-edge nesting solution for parts, optimizing material usage and production efficiency. Develop quick-load mechanisms to streamline the loading and unloading process, minimizing downtime and increasing throughput. Quality Assurance and Compliance: Ensure compliance with all relevant quality standards, regulations, and industry best practices. Implement robust quality control measures to identify and address any deviations or discrepancies in measurement data. Cross-functional Collaboration: Collaborate closely with engineering, production, and quality assurance teams to support product development and manufacturing processes. Act as a subject matter expert on metrology-related matters, providing guidance and support as needed. Required Qualifications Extensive experience (3+ years) in metrology, particularly within the aerospace industry. Proficiency in operating and programming Coordinate Measuring Machines (CMM), preferably with experience using PC-DMIS software. Strong understanding of first principal inspection techniques and metrology best practices. Proven leadership experience, with the ability to inspire and motivate teams to achieve exceptional results. Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Would be welcomed but not essential. Excellent analytical skills and attention to detail, with a focus on continuous improvement. Strong communication and interpersonal skills, with the ability to effectively collaborate across different teams and departments. We expect the highest possible standards of motivation and work ethics, a clear commitment to our company values of purpose, excellence, innovation, and team culture. What We Offer Strategic Impact: Shape critical operational processes and establish a legacy of excellence in a rapidly scaling organization. Prestige and Innovation: Work on high-stakes projects that define the future of aerospace, space, and defense. Meritocratic Culture: Join an organization where excellence, integrity, and results are the foundation of everything we do. _BUOYANCY AEROSPACE V1 Ltd. is an equal opportunity employer; employment with us is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, colour, religion, age, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status._ Job Type: Full-time Pay: £35,000.00-£40,000.00 per year Benefits: Canteen Company events Free parking On-site parking Referral programme Ability to commute/relocate: Barnoldswick BB18 6DX: reliably commute or plan to relocate before starting work (required) Experience: Aerospace: 2 years (required) PC-DMIS: 2 years (required) Work authorisation: United Kingdom (required) Work Location: In person
DesignManager - Architecture & Engineering Shapethe Future of Innovative Design Are youready to take the next step in your career and lead the delivery ofcutting-edge design solutions? At TetraTech RPS, we're looking for a talented and driven Design Manager to join ourprogressive Design business based in Newark,Birmingham or London with hybrid working available. This is anexciting opportunity to work on high-profile projects across multiple sectors,including residential housing, logistics, retail, aviation, healthcare,education, advanced manufacturing, data centres, and energy. Our DesignDivision is at the forefront of harmonising form and function, balancingsustainability, materiality, cost, and constructability. Digitalisation is atthe core of our approach, enabling clients and stakeholders to experiencedesigns from concept through delivery. If you're passionate about managingcomplex design processes and driving excellence, this role offers the chance tomake a real impact. Purpose& Scope of the Role As aDesign Manager, you'll play a key role in supporting the Senior Management Teamin delivering architectural and engineering design services across a diverseportfolio of projects. You will oversee project delivery programmes, manage resourcelevels, and ensure that all design outputs meet client requirements anddeadlines. Your responsibilities will include coordinating project informationthrough structured protocols, managing deliverables in line with agreedprogrammes, and supporting commercial management activities such as scopevariations, contractual notices, and payment applications. You will alsoestablish and manage sub-consultant contracts, monitor project decision andchange logs, and maintain accurate records to ensure seamless projectexecution. This role demands initiative, precision, and a proactive approach toproblem-solving, ensuring that every project is delivered to the higheststandards. YourImpact in this Position You'll beinstrumental in ensuring projects run smoothly, deadlines are met, and clientexpectations are exceeded. Success in this role is measured through effectivecoordination, commercial awareness, and the ability to maintain strongrelationships with internal teams and external stakeholders. With clearpathways for growth and the chance to work on landmark projects, this is a rolewhere your organisational skills and leadership will truly shine. YourToolkit for Success at RPS At RPS, werecruit using core capabilities-the essential skills, experience, andresponsibilities required to perform the role effectively. But here'sthe secret: there's no such thing as the 'perfect' candidate. If you feel youmeet 75% of the requirements for this role, we'd love to hear from you. Technical Expertise You will bring a strong foundation indesign management within the construction sector, backed by at least threeyears of relevant experience. This role demands a deep understanding of theprocesses and protocols that underpin successful project delivery, frompre-appointment reviews through to execution and close-out. Your technicalcapability will include proficiency in Microsoft Office, particularly Excel,where advanced skills such as pivot tables and lookup formulas will enable you tomanage data effectively and support commercial reporting. Beyond softwareproficiency, you will demonstrate the ability to plan and monitor resources,manage structured project protocols, and oversee the distribution ofdeliverables in line with agreed programmes. Familiarity with contractualprocesses, fee claims, and change management will be essential, as you willoften be required to identify opportunities for additional scope and justifyassociated costs and timelines. Your attention to detail and commitment toaccuracy will ensure that every aspect of project delivery meets the higheststandards. Leadership &Collaboration As a Design Manager, you will be a central figure in coordinating effortsacross multiple teams and disciplines. You'll work closely with ProjectDirectors, Finance and Legal teams, and client representatives, ensuring thatcommunication flows seamlessly and decisions are implemented effectively. Yourleadership will be demonstrated through your ability to prioritise tasks,allocate resources, and maintain clarity in complex project environments.Collaboration will be at the heart of your approach-building strongrelationships internally and externally to foster trust and alignment. You willact as a reliable point of contact for project teams, providing guidance andsupport while maintaining a focus on achieving client objectives. By promotingteamwork and encouraging knowledge sharing, you will help create an environmentwhere individuals feel empowered to contribute their best work, ensuring thatprojects are delivered on time and to specification. Programme & Resource Management You will excel in planning and managing project deliveryprogrammes, ensuring that resources are allocated effectively to meet deadlinesand client expectations. This competency includes monitoring progress againstagreed schedules, identifying potential bottlenecks, and implementingcorrective actions to maintain momentum. Your ability to balance competingpriorities and optimise workflows will be critical in delivering projects ontime and within scope, while maintaining the highest standards of quality andcompliance. Commercial & Contractual Acumen You will demonstrate strong commercial awareness and a thoroughunderstanding of contractual processes, enabling you to manage scopevariations, fee claims, and payment applications with confidence. Thiscompetency involves proactively identifying opportunities for additionalservices, preparing accurate documentation, and ensuring compliance withcontractual obligations. By combining attention to detail with strategicinsight, you will safeguard project profitability and reinforce client trustthrough transparent and effective commercial management. Communication &Relationship Building Exceptional communication skills are fundamental to success in this role. Youwill be adept at translating complex technical and commercial information intoclear, concise documentation that can be understood by stakeholders at alllevels. Whether you are preparing reports, drafting contractual notices, orpresenting project updates, your ability to communicate with clarity andconfidence will set you apart. Building and maintaining strong relationshipswill be a key aspect of your role-engaging with clients to understand theirpriorities, responding proactively to challenges, and ensuring thatexpectations are consistently met or exceeded. Internally, you will contributeto a positive team culture by promoting openness, encouraging collaboration,and supporting colleagues in achieving shared goals. Externally, you willrepresent the business with professionalism and integrity, reinforcing ourreputation as a trusted partner and industry leader. MandatoryRequirements Substantialexperience in design management within construction Strongorganisational and communication skills Proficiencyin Microsoft Office Beneficial Experiencein commercial management processes Ability toidentify opportunities for additional fees and scope changes About Tetra Tech RPS Tetra Tech RPS is committed to fostering a diverse and inclusive environmentacross all areas of our organisation. We recognise that a broad range ofbackgrounds and perspectives contributes to a more dynamic, innovative, andsupportive workplace where every individual is empowered to share their ideasand contribute meaningfully. We are dedicated to building aculture of respect and equity, where people are valued regardless of theirethnicity, gender identity, age, belief system, sexual orientation, or anyother personal characteristic. In alignment with the EqualityAct 2010, we will make reasonable adjustments to support candidates andemployees requiring additional arrangements. This could include adaptations towork schedules, training approaches, or the physical workspace. Please informus if you need any accommodations during the recruitment process or in yourday-to-day role. Flexible and part-time working options are available in thisrole, with working patterns agreed collaboratively between employees and linemanagers to support individual wellbeing and optimal performance. JBRP1_UKTJ
Dec 13, 2025
Full time
DesignManager - Architecture & Engineering Shapethe Future of Innovative Design Are youready to take the next step in your career and lead the delivery ofcutting-edge design solutions? At TetraTech RPS, we're looking for a talented and driven Design Manager to join ourprogressive Design business based in Newark,Birmingham or London with hybrid working available. This is anexciting opportunity to work on high-profile projects across multiple sectors,including residential housing, logistics, retail, aviation, healthcare,education, advanced manufacturing, data centres, and energy. Our DesignDivision is at the forefront of harmonising form and function, balancingsustainability, materiality, cost, and constructability. Digitalisation is atthe core of our approach, enabling clients and stakeholders to experiencedesigns from concept through delivery. If you're passionate about managingcomplex design processes and driving excellence, this role offers the chance tomake a real impact. Purpose& Scope of the Role As aDesign Manager, you'll play a key role in supporting the Senior Management Teamin delivering architectural and engineering design services across a diverseportfolio of projects. You will oversee project delivery programmes, manage resourcelevels, and ensure that all design outputs meet client requirements anddeadlines. Your responsibilities will include coordinating project informationthrough structured protocols, managing deliverables in line with agreedprogrammes, and supporting commercial management activities such as scopevariations, contractual notices, and payment applications. You will alsoestablish and manage sub-consultant contracts, monitor project decision andchange logs, and maintain accurate records to ensure seamless projectexecution. This role demands initiative, precision, and a proactive approach toproblem-solving, ensuring that every project is delivered to the higheststandards. YourImpact in this Position You'll beinstrumental in ensuring projects run smoothly, deadlines are met, and clientexpectations are exceeded. Success in this role is measured through effectivecoordination, commercial awareness, and the ability to maintain strongrelationships with internal teams and external stakeholders. With clearpathways for growth and the chance to work on landmark projects, this is a rolewhere your organisational skills and leadership will truly shine. YourToolkit for Success at RPS At RPS, werecruit using core capabilities-the essential skills, experience, andresponsibilities required to perform the role effectively. But here'sthe secret: there's no such thing as the 'perfect' candidate. If you feel youmeet 75% of the requirements for this role, we'd love to hear from you. Technical Expertise You will bring a strong foundation indesign management within the construction sector, backed by at least threeyears of relevant experience. This role demands a deep understanding of theprocesses and protocols that underpin successful project delivery, frompre-appointment reviews through to execution and close-out. Your technicalcapability will include proficiency in Microsoft Office, particularly Excel,where advanced skills such as pivot tables and lookup formulas will enable you tomanage data effectively and support commercial reporting. Beyond softwareproficiency, you will demonstrate the ability to plan and monitor resources,manage structured project protocols, and oversee the distribution ofdeliverables in line with agreed programmes. Familiarity with contractualprocesses, fee claims, and change management will be essential, as you willoften be required to identify opportunities for additional scope and justifyassociated costs and timelines. Your attention to detail and commitment toaccuracy will ensure that every aspect of project delivery meets the higheststandards. Leadership &Collaboration As a Design Manager, you will be a central figure in coordinating effortsacross multiple teams and disciplines. You'll work closely with ProjectDirectors, Finance and Legal teams, and client representatives, ensuring thatcommunication flows seamlessly and decisions are implemented effectively. Yourleadership will be demonstrated through your ability to prioritise tasks,allocate resources, and maintain clarity in complex project environments.Collaboration will be at the heart of your approach-building strongrelationships internally and externally to foster trust and alignment. You willact as a reliable point of contact for project teams, providing guidance andsupport while maintaining a focus on achieving client objectives. By promotingteamwork and encouraging knowledge sharing, you will help create an environmentwhere individuals feel empowered to contribute their best work, ensuring thatprojects are delivered on time and to specification. Programme & Resource Management You will excel in planning and managing project deliveryprogrammes, ensuring that resources are allocated effectively to meet deadlinesand client expectations. This competency includes monitoring progress againstagreed schedules, identifying potential bottlenecks, and implementingcorrective actions to maintain momentum. Your ability to balance competingpriorities and optimise workflows will be critical in delivering projects ontime and within scope, while maintaining the highest standards of quality andcompliance. Commercial & Contractual Acumen You will demonstrate strong commercial awareness and a thoroughunderstanding of contractual processes, enabling you to manage scopevariations, fee claims, and payment applications with confidence. Thiscompetency involves proactively identifying opportunities for additionalservices, preparing accurate documentation, and ensuring compliance withcontractual obligations. By combining attention to detail with strategicinsight, you will safeguard project profitability and reinforce client trustthrough transparent and effective commercial management. Communication &Relationship Building Exceptional communication skills are fundamental to success in this role. Youwill be adept at translating complex technical and commercial information intoclear, concise documentation that can be understood by stakeholders at alllevels. Whether you are preparing reports, drafting contractual notices, orpresenting project updates, your ability to communicate with clarity andconfidence will set you apart. Building and maintaining strong relationshipswill be a key aspect of your role-engaging with clients to understand theirpriorities, responding proactively to challenges, and ensuring thatexpectations are consistently met or exceeded. Internally, you will contributeto a positive team culture by promoting openness, encouraging collaboration,and supporting colleagues in achieving shared goals. Externally, you willrepresent the business with professionalism and integrity, reinforcing ourreputation as a trusted partner and industry leader. MandatoryRequirements Substantialexperience in design management within construction Strongorganisational and communication skills Proficiencyin Microsoft Office Beneficial Experiencein commercial management processes Ability toidentify opportunities for additional fees and scope changes About Tetra Tech RPS Tetra Tech RPS is committed to fostering a diverse and inclusive environmentacross all areas of our organisation. We recognise that a broad range ofbackgrounds and perspectives contributes to a more dynamic, innovative, andsupportive workplace where every individual is empowered to share their ideasand contribute meaningfully. We are dedicated to building aculture of respect and equity, where people are valued regardless of theirethnicity, gender identity, age, belief system, sexual orientation, or anyother personal characteristic. In alignment with the EqualityAct 2010, we will make reasonable adjustments to support candidates andemployees requiring additional arrangements. This could include adaptations towork schedules, training approaches, or the physical workspace. Please informus if you need any accommodations during the recruitment process or in yourday-to-day role. Flexible and part-time working options are available in thisrole, with working patterns agreed collaboratively between employees and linemanagers to support individual wellbeing and optimal performance. JBRP1_UKTJ
Software Engineer - UK C DV Salary: 40,000 - 75,000 DoE Location: Cheltenham - expect to attend site five days a week Clearance: Must hold current UK C DV The company: Cyber Security and National Security SME. The company is large enough to offer stability, expert support and career progression while enabling you to work with a large degree of autonomy developing cutting edge solutions over a range of projects. Requirements: They are open to your background, but would expect you to have experience in some of the following tech stack and be proactive in learning new technologies. You will have a learning and development budget to support this. Python, Java, TypeScript, JavaScript React, Angular, React Kubernetes (k8s) Docker AWS, Azure Elasticsearch, MERN, Neo4J Benefits Excellent company benefits including significant pension contributions, BUPA, equity and training allowance.
Dec 13, 2025
Full time
Software Engineer - UK C DV Salary: 40,000 - 75,000 DoE Location: Cheltenham - expect to attend site five days a week Clearance: Must hold current UK C DV The company: Cyber Security and National Security SME. The company is large enough to offer stability, expert support and career progression while enabling you to work with a large degree of autonomy developing cutting edge solutions over a range of projects. Requirements: They are open to your background, but would expect you to have experience in some of the following tech stack and be proactive in learning new technologies. You will have a learning and development budget to support this. Python, Java, TypeScript, JavaScript React, Angular, React Kubernetes (k8s) Docker AWS, Azure Elasticsearch, MERN, Neo4J Benefits Excellent company benefits including significant pension contributions, BUPA, equity and training allowance.
We are March the UKs leading provider of critical engineering services. Our expertise as a multi-disciplinary engineering partner across infrastructure, process and digital services has led to long term partnerships with leading organisations in everything from food and drink and utilities to high-security industries such as defence, aerospace and nuclear. We are seeking a talented and detail-oriented Control Systems Engineer to join our engineering team. This role focuses on designing and developing bespoke automation software that meets customer requirements while adhering to industry standards. The ideal candidate will combine technical expertise with creativity to deliver solutions that enhance our reputation for excellence. Key Responsibilities Understand an Automation Project Lifecyle from concept to completion. Design and Test Control Software applications for PLC s and HMI s for a variety of different requirements. Functional Testing of all Software Applications created and safe on-site installation and commissioning. Produce and maintain high-quality technical design documentation, such as Functional Design Specification (FDS), Software Design Specification, (SDS) internal and site testing records and user manuals. Work closely with clients to interpret requirements, present design concepts, and incorporate feedback. Ensure designs meet relevant regulatory and safety standards and are consistent throughout the design and development process. Collaborate with colleagues to ensure smooth project delivery. Skills and Experience Understanding of designing/interpreting Functional Design Specifications (FDS) and translating into automation software requirements. Experience in programming Rockwell Control-Logix PLC s essential. Experience of Siemens TIA Portal and Mitsubishi hardware also an advantage. Experience in programming Rockwell HMI s essential. Experience of other brand HMI s also an advantage . A knowledge of setting up Automation TCP/IP networks essential. A knowledge of SCADA applications an advantage. Experience of real time electrical and control system commissioning at client locations. A knowledge of wet process and fast moving consumer goods an advantage, such as Water Processing and Treatment and Food and Beverage Manufacture. Familiarity with PLC programming, SCADA systems, and industrial communication protocols is required. Competency in Microsoft Office applications, especially Excel; experience with ERP systems is a plus. Specific Qualifications Full, clean UK driving licence is essential for site visits. Strong analytical skills with the ability to troubleshoot and resolve design challenges effectively. Degree, equivalent or HNC qualification in Electrical Engineering, Control Systems, or a related field. What we offer A competitive salary and benefits package appropriate to this position An employer who values the ongoing wellbeing of its employees Career development within a successful and growing business We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Dec 13, 2025
Full time
We are March the UKs leading provider of critical engineering services. Our expertise as a multi-disciplinary engineering partner across infrastructure, process and digital services has led to long term partnerships with leading organisations in everything from food and drink and utilities to high-security industries such as defence, aerospace and nuclear. We are seeking a talented and detail-oriented Control Systems Engineer to join our engineering team. This role focuses on designing and developing bespoke automation software that meets customer requirements while adhering to industry standards. The ideal candidate will combine technical expertise with creativity to deliver solutions that enhance our reputation for excellence. Key Responsibilities Understand an Automation Project Lifecyle from concept to completion. Design and Test Control Software applications for PLC s and HMI s for a variety of different requirements. Functional Testing of all Software Applications created and safe on-site installation and commissioning. Produce and maintain high-quality technical design documentation, such as Functional Design Specification (FDS), Software Design Specification, (SDS) internal and site testing records and user manuals. Work closely with clients to interpret requirements, present design concepts, and incorporate feedback. Ensure designs meet relevant regulatory and safety standards and are consistent throughout the design and development process. Collaborate with colleagues to ensure smooth project delivery. Skills and Experience Understanding of designing/interpreting Functional Design Specifications (FDS) and translating into automation software requirements. Experience in programming Rockwell Control-Logix PLC s essential. Experience of Siemens TIA Portal and Mitsubishi hardware also an advantage. Experience in programming Rockwell HMI s essential. Experience of other brand HMI s also an advantage . A knowledge of setting up Automation TCP/IP networks essential. A knowledge of SCADA applications an advantage. Experience of real time electrical and control system commissioning at client locations. A knowledge of wet process and fast moving consumer goods an advantage, such as Water Processing and Treatment and Food and Beverage Manufacture. Familiarity with PLC programming, SCADA systems, and industrial communication protocols is required. Competency in Microsoft Office applications, especially Excel; experience with ERP systems is a plus. Specific Qualifications Full, clean UK driving licence is essential for site visits. Strong analytical skills with the ability to troubleshoot and resolve design challenges effectively. Degree, equivalent or HNC qualification in Electrical Engineering, Control Systems, or a related field. What we offer A competitive salary and benefits package appropriate to this position An employer who values the ongoing wellbeing of its employees Career development within a successful and growing business We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Graduate/Junior Hardware Engineer - Surrey - 40K- 45K My client is a prestigious UK consultancy renowned for tackling some of the toughest R&D challenges in electronics and signal processing. Their elite team works on cutting-edge projects spanning advanced hardware, embedded systems, and mission-critical applications. They are looking for a Junior/Graduate Hardware Engineer to join their elite team. You will get to work on a range of products throughout multiple industries, within cross-functional teams. Skills Required: + PCB Design Knowledge/Exposure + Knowledge of FPGAs, VHDL or Verilog + Experience with Software, Embedded C/C++ + Must be a graduate from a Russell Group University, achieving at least a 2:1 This role pays a competitive salary of 40K- 45K. If this sounds like you, please apply!
Dec 13, 2025
Full time
Graduate/Junior Hardware Engineer - Surrey - 40K- 45K My client is a prestigious UK consultancy renowned for tackling some of the toughest R&D challenges in electronics and signal processing. Their elite team works on cutting-edge projects spanning advanced hardware, embedded systems, and mission-critical applications. They are looking for a Junior/Graduate Hardware Engineer to join their elite team. You will get to work on a range of products throughout multiple industries, within cross-functional teams. Skills Required: + PCB Design Knowledge/Exposure + Knowledge of FPGAs, VHDL or Verilog + Experience with Software, Embedded C/C++ + Must be a graduate from a Russell Group University, achieving at least a 2:1 This role pays a competitive salary of 40K- 45K. If this sounds like you, please apply!
Street Lighting Design Engineer Manchester / Birmingham - Hybrid / Fully Remote home worker who is close to these cities £45,000 Brief Street Lighting Design Engineer needed for a well-known design and engineering consultancy organisation. The role I have available can be based out of either their London or Birmingham office on a hybrid basis / fully remote. My client is looking to employ an experienced and well-rounded Street Lighting Design Engineer that takes pride in their work. The successful candidate would need to be competent in the use of CAD and lighting design software such as Lighting Reality / Calculux. and have a good working knowledge of the road lighting industry. Benefits Salary: £35,000 - £45,000 per annum Flexible working 25 day's holidays Pension Plan Career Progression What the role entails: Lighting Engineer, who could be based at any one of several of our offices nationwide (with opportunities for project roles on site) or adopt an agile/flexible working approach and be home based. You will work within a team of road lighting specialists with responsibility for ensuring the highest levels of quality in your project deliverables. What experience you need to be the successful Street Lighting Design Engineer: Degree qualified, ideally in a relevant engineering discipline, with years' relevant experience, or HNC/HND in Electrical Engineering with 8 years' relevant experience. Good working knowledge of the road lighting industry. Demonstrable working knowledge of relevant design standards, best practice guidance and legislation. LED and CMS design (inspection and testing experience desirable). Competent in the use of CAD and lighting design software such as Lighting Reality / Calculux. Applied experience of CDM 2015, health & safety management, quality and environmental standards. Ability to communicate effectively in the application of engineering principles to road lighting design. This really is a fantastic opportunity for a Street Lighting Design Engineer to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website. JBRP1_UKTJ
Dec 13, 2025
Full time
Street Lighting Design Engineer Manchester / Birmingham - Hybrid / Fully Remote home worker who is close to these cities £45,000 Brief Street Lighting Design Engineer needed for a well-known design and engineering consultancy organisation. The role I have available can be based out of either their London or Birmingham office on a hybrid basis / fully remote. My client is looking to employ an experienced and well-rounded Street Lighting Design Engineer that takes pride in their work. The successful candidate would need to be competent in the use of CAD and lighting design software such as Lighting Reality / Calculux. and have a good working knowledge of the road lighting industry. Benefits Salary: £35,000 - £45,000 per annum Flexible working 25 day's holidays Pension Plan Career Progression What the role entails: Lighting Engineer, who could be based at any one of several of our offices nationwide (with opportunities for project roles on site) or adopt an agile/flexible working approach and be home based. You will work within a team of road lighting specialists with responsibility for ensuring the highest levels of quality in your project deliverables. What experience you need to be the successful Street Lighting Design Engineer: Degree qualified, ideally in a relevant engineering discipline, with years' relevant experience, or HNC/HND in Electrical Engineering with 8 years' relevant experience. Good working knowledge of the road lighting industry. Demonstrable working knowledge of relevant design standards, best practice guidance and legislation. LED and CMS design (inspection and testing experience desirable). Competent in the use of CAD and lighting design software such as Lighting Reality / Calculux. Applied experience of CDM 2015, health & safety management, quality and environmental standards. Ability to communicate effectively in the application of engineering principles to road lighting design. This really is a fantastic opportunity for a Street Lighting Design Engineer to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website. JBRP1_UKTJ
Robotics Software Engineer - C++/ROS2 Are you an experienced Robotics Software Engineer with a strong background in ROS2, C++? Are you based in the Cambridge area, or keen to join one of the UK's leading hubs for robotics and technology innovation? If so, our client an innovative "tech for good" start-up - is seeking a Robotics Software Engineer to join their growing R&D team in Cambridge, supporting projects across the UK and EU. Key Responsibilities: Design, develop, and integrate ROS2-based software for advanced robotic systems. Collaborate with cross-functional teams (electronics, mechatronics, AI/research) in an Agile environment. Implement, test, and debug real-time robotic applications on Linux platforms. Deploy and validate robotics software on physical hardware, including field testing. Required Skills & Experience: Degree or Master's in Software Engineering, Computer Science, Robotics, or a related discipline. Proven experience with modern C++ (C+ or later) Hands-on expertise with ROS2 (Robot Operating System 2). Experience integrating software with embedded or edge computing hardware (e.G. NVIDIA Jetson/Xavier). Exposure to ROS1 migration, simulation tools (e.G. Gazebo, RViz), and project tracking tools such as Jira. This role offers a competitive salary, benefits package, and opportunities for career progression and profit share within a pioneering robotics company driving real-world impact. To apply for the Robotics Software Engineer - C++/ROS2 (Linux) role, please send your CV to (url removed) Or call (phone number removed) / (phone number removed).
Dec 13, 2025
Full time
Robotics Software Engineer - C++/ROS2 Are you an experienced Robotics Software Engineer with a strong background in ROS2, C++? Are you based in the Cambridge area, or keen to join one of the UK's leading hubs for robotics and technology innovation? If so, our client an innovative "tech for good" start-up - is seeking a Robotics Software Engineer to join their growing R&D team in Cambridge, supporting projects across the UK and EU. Key Responsibilities: Design, develop, and integrate ROS2-based software for advanced robotic systems. Collaborate with cross-functional teams (electronics, mechatronics, AI/research) in an Agile environment. Implement, test, and debug real-time robotic applications on Linux platforms. Deploy and validate robotics software on physical hardware, including field testing. Required Skills & Experience: Degree or Master's in Software Engineering, Computer Science, Robotics, or a related discipline. Proven experience with modern C++ (C+ or later) Hands-on expertise with ROS2 (Robot Operating System 2). Experience integrating software with embedded or edge computing hardware (e.G. NVIDIA Jetson/Xavier). Exposure to ROS1 migration, simulation tools (e.G. Gazebo, RViz), and project tracking tools such as Jira. This role offers a competitive salary, benefits package, and opportunities for career progression and profit share within a pioneering robotics company driving real-world impact. To apply for the Robotics Software Engineer - C++/ROS2 (Linux) role, please send your CV to (url removed) Or call (phone number removed) / (phone number removed).
Manufacturing Engineer (CNC Sliding Head) Tewkesbury Aerospace/Advanced Manufacturing Negotiable THE ROLE - Manufacturing Engineer (CNC Sliding Head) This is a fantastic opportunity to join a stand-out aerospace engineering business to support in the delivery of a project of work through to September, and potentially beyond. As a Manufacturing Engineer, you'll need to possess excellent experience in Sliding Head lathe practices and processes including programming and CAD/CAM knowledge. As an expert with Sliding Head machining, you should have knowledge of some of the following machines: Star ST38, Star SR10J, Star SW20, Citizen. DUTIES - Manufacturing Engineer (CNC Sliding Head) Authoring and approving manufacturing processes and process specifications Online and Offline programming for CNC Activities - Perform problem solving and root cause corrective actions (RCCA). Provide technical, machining task planning and authorisation. Advise and support daily shop-floor management meetings. Develop the ME function, identifying new technology to enhance productivity & quality. BACKGROUND -Manufacturing Engineer (CNC Sliding Head) Manufacturing / Engineering Apprenticeship or above. Previous Hands-on Machining experience (Sliding Head) Experience with Star ST38, Star SR10J, Star SW20 or Citizen machines. Confident with geometric dimensioning and tolerancing (GD&T). Offline programming using CAD/CAM software - G-Code Omega For more information on this role, please contact Lee Powell on or send a copy of your CV to Candidates who are currently a Manufacturing Engineer, Senior Manufacturing Engineer, CNC Programmer, Production Engineer, Production Manager, Lead Manufacturing Engineer, Manufacturing Team Leader, Continuous Improvement Engineer and similar may be considered. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Dec 13, 2025
Full time
Manufacturing Engineer (CNC Sliding Head) Tewkesbury Aerospace/Advanced Manufacturing Negotiable THE ROLE - Manufacturing Engineer (CNC Sliding Head) This is a fantastic opportunity to join a stand-out aerospace engineering business to support in the delivery of a project of work through to September, and potentially beyond. As a Manufacturing Engineer, you'll need to possess excellent experience in Sliding Head lathe practices and processes including programming and CAD/CAM knowledge. As an expert with Sliding Head machining, you should have knowledge of some of the following machines: Star ST38, Star SR10J, Star SW20, Citizen. DUTIES - Manufacturing Engineer (CNC Sliding Head) Authoring and approving manufacturing processes and process specifications Online and Offline programming for CNC Activities - Perform problem solving and root cause corrective actions (RCCA). Provide technical, machining task planning and authorisation. Advise and support daily shop-floor management meetings. Develop the ME function, identifying new technology to enhance productivity & quality. BACKGROUND -Manufacturing Engineer (CNC Sliding Head) Manufacturing / Engineering Apprenticeship or above. Previous Hands-on Machining experience (Sliding Head) Experience with Star ST38, Star SR10J, Star SW20 or Citizen machines. Confident with geometric dimensioning and tolerancing (GD&T). Offline programming using CAD/CAM software - G-Code Omega For more information on this role, please contact Lee Powell on or send a copy of your CV to Candidates who are currently a Manufacturing Engineer, Senior Manufacturing Engineer, CNC Programmer, Production Engineer, Production Manager, Lead Manufacturing Engineer, Manufacturing Team Leader, Continuous Improvement Engineer and similar may be considered. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Contracts Engineer (Mechanical Applications) Location: Nottingham (Hybrid - 3 Days Office / 2 Days Remote) Contract: 9-12 Months (Inside IR35) Rate: £30,000 Pro rata (DOE) + Hybrid Working + Immediate Start Are you a Contracts Engineer, Applications Engineer, or Technical Coordinator with experience supporting complex engineering projects? Are you looking for a new contract role with an immediate start, working on major municipal and industrial pump applications? This is a fantastic opportunity to join a global engineering organisation delivering technical and commercial support across multiple water, municipal, and industrial frameworks. The role offers a hybrid working setup and excellent exposure to high value projects. Candidates from a mechanical, process, or pump engineering background are strongly encouraged to apply full training will be provided on the internal CPQ and Salesforce systems. The Role: Review and process customer orders using internal CPQ and ERP systems (Salesforce experience beneficial) Ensure accurate order entry, invoicing, and documentation in line with company and client targets Liaise with customers, suppliers, and internal engineering teams to resolve post-order and technical queries Support contract delivery across pumps, mixers, and water treatment applications Work closely with regional managers and sales engineers to meet SLA targets and ensure customer satisfaction The Person: Previous experience in a Contracts Engineer, Sales Support, or Applications Engineering role Background in mechanical, water, or industrial engineering (degree or equivalent preferred) Confident working with bespoke software tools such as Salesforce, CPQ, or ERP systems (training provided) Excellent problem-solving and communication skills with strong attention to detail Proactive, team-oriented, and able to manage multiple technical orders simultaneously Based within commutable distance of Basingstoke with flexibility for hybrid working Reference Number: BBBH265059 To apply for this role or to be considered for further positions, please click 'Apply Now' or contact Ed Douglass at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The rates advertised are the bracket available for this position. The actual rate paid will depend on your experience, qualifications, and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Key Commutable Locations: Nottingham, Beeston, Chilwell, Long Eaton, Stapleford, Ilkeston, Kimberley, Eastwood, Hucknall, Arnold, Carlton, Netherfield, West Bridgford, Ruddington, Clifton, Lenton, Wollaton, Mapperley, Sherwood, Bulwell, Bilborough, Radcliffe-on-Trent, Bingham, Burton Joyce, Lowdham, Southwell, Newark-on-Trent, Mansfield, Sutton-in-Ashfield, Kirkby-in-Ashfield, Ripley, Alfreton, Heanor, Derby, Sandiacre, Castle Donington, Kegworth, Loughborough, Melton Mowbray, Grantham JBRP1_UKTJ
Dec 13, 2025
Full time
Contracts Engineer (Mechanical Applications) Location: Nottingham (Hybrid - 3 Days Office / 2 Days Remote) Contract: 9-12 Months (Inside IR35) Rate: £30,000 Pro rata (DOE) + Hybrid Working + Immediate Start Are you a Contracts Engineer, Applications Engineer, or Technical Coordinator with experience supporting complex engineering projects? Are you looking for a new contract role with an immediate start, working on major municipal and industrial pump applications? This is a fantastic opportunity to join a global engineering organisation delivering technical and commercial support across multiple water, municipal, and industrial frameworks. The role offers a hybrid working setup and excellent exposure to high value projects. Candidates from a mechanical, process, or pump engineering background are strongly encouraged to apply full training will be provided on the internal CPQ and Salesforce systems. The Role: Review and process customer orders using internal CPQ and ERP systems (Salesforce experience beneficial) Ensure accurate order entry, invoicing, and documentation in line with company and client targets Liaise with customers, suppliers, and internal engineering teams to resolve post-order and technical queries Support contract delivery across pumps, mixers, and water treatment applications Work closely with regional managers and sales engineers to meet SLA targets and ensure customer satisfaction The Person: Previous experience in a Contracts Engineer, Sales Support, or Applications Engineering role Background in mechanical, water, or industrial engineering (degree or equivalent preferred) Confident working with bespoke software tools such as Salesforce, CPQ, or ERP systems (training provided) Excellent problem-solving and communication skills with strong attention to detail Proactive, team-oriented, and able to manage multiple technical orders simultaneously Based within commutable distance of Basingstoke with flexibility for hybrid working Reference Number: BBBH265059 To apply for this role or to be considered for further positions, please click 'Apply Now' or contact Ed Douglass at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The rates advertised are the bracket available for this position. The actual rate paid will depend on your experience, qualifications, and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Key Commutable Locations: Nottingham, Beeston, Chilwell, Long Eaton, Stapleford, Ilkeston, Kimberley, Eastwood, Hucknall, Arnold, Carlton, Netherfield, West Bridgford, Ruddington, Clifton, Lenton, Wollaton, Mapperley, Sherwood, Bulwell, Bilborough, Radcliffe-on-Trent, Bingham, Burton Joyce, Lowdham, Southwell, Newark-on-Trent, Mansfield, Sutton-in-Ashfield, Kirkby-in-Ashfield, Ripley, Alfreton, Heanor, Derby, Sandiacre, Castle Donington, Kegworth, Loughborough, Melton Mowbray, Grantham JBRP1_UKTJ
Infinity Employment is looking for a passionate Quality Systems Engineer for an industry leading specialist, manufacturing precision components for aviation, tooling, automotive, F1 and defence industries. Reporting to Head of Production . The prime objective of the position is to be responsible for operating the Quality Management System (QMS), writing procedures and processes to support the QMS development. Lead and undertake audits across all areas of the business as well as across the supply chain. Provide training and champion the Quality Management System. Work on many phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Work under general supervision, reviewed at project milestones and/or on completion by Senior Management. The role will not have any direct reports. Salary is 35,000- 40,000 (Open for negotiation for the desired skill set) General Responsibilities/Requirements: Oversee effective implementation of the Quality Management System throughout the company, including any business accreditations Maintain the Quality Manuals and Quality Procedures and ensure contents are appropriate for business Analyse current and future procedural needs of the business Organise and manage the plant internal audit system and the corrective action reporting system Conduct Quality Systems audits and assist in training/guidance to other auditors Support external Quality System audits Provide training on Quality issues and business processes Coordinate the review of Quality procedures associated with plant continuous improvement initiatives Plan Standard Operating practices required under the overriding Quality procedures Maintain the Standard Operating Procedure content and coordinate the issuing of these documents Support other functional areas of the business including procurement, business services and design Collate quality data for monitoring targets Assist with training of quality awareness Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system Assist with first off sample approvals Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, Poka-Yoke (Error Proofing), and Measurement System Analysis all in line with QRM principles of Lead time reduction Form No. QCD_FOR1009 Keep up with current and developing manufacturing and engineering trends that concern product quality Undertake special projects as required Contribute to continuous improvement activities Quality control of work by appropriate reviews Support and lead process improvement activities Conduct benchmarking studies to determine best practices/designs and future trends Plan projects or subtasks so they may be tracked and presented Attend various meetings and action/communicate instructions Undertake continuous training and development Perform root cause analysis and resolve problems with the CI team To work closely with Sales, Engineering and Manufacturing functions to understand customer and product requirements and thus provide a satisfactory level of measurement and process control support, using Quality Tools to validate new and improved processes, seeking continuous improvement and waste elimination. JOB KNOWLEDGE, EXPERIENCE & QUALIFICATIONS Minimum five years Quality Engineering experience within an automotive or precision manufacturing environment. Demonstrable experience in the application of the quality core tools in high variance batch production and low volume one-piece flow scenarios. Advanced Product Quality Planning (APQP) Production Part Approval Process (PPAP) Failure Mode Effects Analysis (FMEA) Measurement Systems Analysis (MSA) Previous experience within a precision machining and/or manual assembly environment is strongly preferred. Educated to HNC/HND level. Certified Internal Quality Auditor is an advantage. Must hold a full UK driving licence. JOB SKILLS Able to combine determination and resolve with diplomacy and tact to influence peers and non-reports to achieve desired outcomes. Demonstrable ability with APQP, PPAP and PSW processes. Demonstrate ability with problem solving techniques (8D or similar) Previous hands-on experience with CMM and other measuring equipment is desirable. Must be computer literate, comfortable using ERP software and MS Office daily. Ability to communicate effectively at all levels of the organisation.
Dec 13, 2025
Full time
Infinity Employment is looking for a passionate Quality Systems Engineer for an industry leading specialist, manufacturing precision components for aviation, tooling, automotive, F1 and defence industries. Reporting to Head of Production . The prime objective of the position is to be responsible for operating the Quality Management System (QMS), writing procedures and processes to support the QMS development. Lead and undertake audits across all areas of the business as well as across the supply chain. Provide training and champion the Quality Management System. Work on many phases or sub-tasks of projects or entire projects of moderate complexity, with results impacting on project completion. Work under general supervision, reviewed at project milestones and/or on completion by Senior Management. The role will not have any direct reports. Salary is 35,000- 40,000 (Open for negotiation for the desired skill set) General Responsibilities/Requirements: Oversee effective implementation of the Quality Management System throughout the company, including any business accreditations Maintain the Quality Manuals and Quality Procedures and ensure contents are appropriate for business Analyse current and future procedural needs of the business Organise and manage the plant internal audit system and the corrective action reporting system Conduct Quality Systems audits and assist in training/guidance to other auditors Support external Quality System audits Provide training on Quality issues and business processes Coordinate the review of Quality procedures associated with plant continuous improvement initiatives Plan Standard Operating practices required under the overriding Quality procedures Maintain the Standard Operating Procedure content and coordinate the issuing of these documents Support other functional areas of the business including procurement, business services and design Collate quality data for monitoring targets Assist with training of quality awareness Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system Assist with first off sample approvals Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, Poka-Yoke (Error Proofing), and Measurement System Analysis all in line with QRM principles of Lead time reduction Form No. QCD_FOR1009 Keep up with current and developing manufacturing and engineering trends that concern product quality Undertake special projects as required Contribute to continuous improvement activities Quality control of work by appropriate reviews Support and lead process improvement activities Conduct benchmarking studies to determine best practices/designs and future trends Plan projects or subtasks so they may be tracked and presented Attend various meetings and action/communicate instructions Undertake continuous training and development Perform root cause analysis and resolve problems with the CI team To work closely with Sales, Engineering and Manufacturing functions to understand customer and product requirements and thus provide a satisfactory level of measurement and process control support, using Quality Tools to validate new and improved processes, seeking continuous improvement and waste elimination. JOB KNOWLEDGE, EXPERIENCE & QUALIFICATIONS Minimum five years Quality Engineering experience within an automotive or precision manufacturing environment. Demonstrable experience in the application of the quality core tools in high variance batch production and low volume one-piece flow scenarios. Advanced Product Quality Planning (APQP) Production Part Approval Process (PPAP) Failure Mode Effects Analysis (FMEA) Measurement Systems Analysis (MSA) Previous experience within a precision machining and/or manual assembly environment is strongly preferred. Educated to HNC/HND level. Certified Internal Quality Auditor is an advantage. Must hold a full UK driving licence. JOB SKILLS Able to combine determination and resolve with diplomacy and tact to influence peers and non-reports to achieve desired outcomes. Demonstrable ability with APQP, PPAP and PSW processes. Demonstrate ability with problem solving techniques (8D or similar) Previous hands-on experience with CMM and other measuring equipment is desirable. Must be computer literate, comfortable using ERP software and MS Office daily. Ability to communicate effectively at all levels of the organisation.
PLC and Control System Design Engineer Plymouth, UK We re representing an innovative engineering company in Plymouth that designs, develops, and integrates advanced control systems for maritime applications. This is a hands-on role covering the full project lifecycle from concept design through to manufacture, testing, and operational deployment. You ll join a collaborative, multi-disciplinary team of mechanical, electrical, and software engineers building bespoke systems that operate in some of the most demanding environments. You ll play a key role in the design, development, and programming of PLC-based control systems, integrating with motors, actuators, sensors, and communication networks to deliver high-performance, reliable solutions. Key Requirements • Degree qualified in Electrical, Robotics, or a related discipline • Minimum of 3 years experience designing and programming PLC control systems • Proven ability to fault-find, optimise, and document PLC systems • Experience with industrial communication protocols such as CAN, EtherCAT, or Modbus • Strong problem-solving and collaboration skills • Eligible to live and work in the UK and capable of achieving SC-level security clearance Desirable Experience in marine or subsea projects, working with Wago or KEB systems, or using structured text programming. Prior experience leading small teams or managing technical projects would be advantageous. The Opportunity You ll be part of a forward-thinking organisation that encourages innovation and professional growth. Flexible working is available between 7am and 7pm, Monday to Friday, with paid overtime opportunities. Support is provided toward achieving Chartered Engineer status, and you ll have access to professional development and specialist training. If you re looking for a technically challenging, varied role that combines autonomy with collaboration, this is a chance to join a company delivering cutting-edge subsea technology. Apply confidentially or get in touch to discuss in more detail.
Dec 13, 2025
Full time
PLC and Control System Design Engineer Plymouth, UK We re representing an innovative engineering company in Plymouth that designs, develops, and integrates advanced control systems for maritime applications. This is a hands-on role covering the full project lifecycle from concept design through to manufacture, testing, and operational deployment. You ll join a collaborative, multi-disciplinary team of mechanical, electrical, and software engineers building bespoke systems that operate in some of the most demanding environments. You ll play a key role in the design, development, and programming of PLC-based control systems, integrating with motors, actuators, sensors, and communication networks to deliver high-performance, reliable solutions. Key Requirements • Degree qualified in Electrical, Robotics, or a related discipline • Minimum of 3 years experience designing and programming PLC control systems • Proven ability to fault-find, optimise, and document PLC systems • Experience with industrial communication protocols such as CAN, EtherCAT, or Modbus • Strong problem-solving and collaboration skills • Eligible to live and work in the UK and capable of achieving SC-level security clearance Desirable Experience in marine or subsea projects, working with Wago or KEB systems, or using structured text programming. Prior experience leading small teams or managing technical projects would be advantageous. The Opportunity You ll be part of a forward-thinking organisation that encourages innovation and professional growth. Flexible working is available between 7am and 7pm, Monday to Friday, with paid overtime opportunities. Support is provided toward achieving Chartered Engineer status, and you ll have access to professional development and specialist training. If you re looking for a technically challenging, varied role that combines autonomy with collaboration, this is a chance to join a company delivering cutting-edge subsea technology. Apply confidentially or get in touch to discuss in more detail.
Scheduling Administrator - Immediate start Temp 13- 14 an hour Monday to Friday, 9-530 parking onsite Hove Are you highly organised, proactive, and thrive in a fast-paced environment? We're looking for a Scheduling Administrator to join our dynamic team and take ownership of coordinating engineer's diaries to ensure smooth and efficient operations. Responsibilities: Manage and maintain engineer's schedules, ensuring optimal allocation of appointments and resources. Liaise with clients, engineers, and internal teams to confirm bookings and resolve scheduling conflicts. Monitor job progress and update systems with real-time information. Respond promptly to changes, cancellations, and urgent requests. Maintain accurate records and documentation related to appointments and job status. What We're Looking For: Proven experience in scheduling, coordination roles preferably with engineers diaries Excellent communication and interpersonal skills. Strong attention to detail and ability to multitask. Proficiency in scheduling software and Microsoft Office Suite. Ability to work under pressure and adapt to changing priorities. Next Steps: Apply today, the client is looking for someone to interview immediately and start asap! Please apply today with your up to date CV and contact details If you have trouble uploading your CV, please email it to (url removed) and put the job title as the subject Working as a temp is an ideal way of exploring different job roles and industries. It's also gives you control of your own work/life balance. Here are just some of the benefits you can expect when you become part of the Office Angels team: Employed directly with Office Angels, meaning we're always on hand to ensure you're being well looked after Eye care vouchers and money towards glasses should you require them for VDU purposes We can search for permanent work whilst you're in assignments and offer expert interview support and advice Weekly pay Pension scheme option (with employer contributions) 28 days paid annual leave (Based on a weekly accrual) By registering with Office Angels you will benefit from the support of a dedicated and experienced recruitment consultant, have access to various interviewing techniques, regular updates of the local employment market and consistent feedback on all applications. This service is offered right through to the day you start your new role and beyond. Office Angels are an equal opportunity employer and are acting as a recruitment agency for this vacancy. Please be aware we receive a lot of applicants for our roles if you have not been contacted within the next 72 hours of applying for this role on this occasion you have not been successful but please go to our website for more vacancies - (url removed). Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Dec 13, 2025
Contractor
Scheduling Administrator - Immediate start Temp 13- 14 an hour Monday to Friday, 9-530 parking onsite Hove Are you highly organised, proactive, and thrive in a fast-paced environment? We're looking for a Scheduling Administrator to join our dynamic team and take ownership of coordinating engineer's diaries to ensure smooth and efficient operations. Responsibilities: Manage and maintain engineer's schedules, ensuring optimal allocation of appointments and resources. Liaise with clients, engineers, and internal teams to confirm bookings and resolve scheduling conflicts. Monitor job progress and update systems with real-time information. Respond promptly to changes, cancellations, and urgent requests. Maintain accurate records and documentation related to appointments and job status. What We're Looking For: Proven experience in scheduling, coordination roles preferably with engineers diaries Excellent communication and interpersonal skills. Strong attention to detail and ability to multitask. Proficiency in scheduling software and Microsoft Office Suite. Ability to work under pressure and adapt to changing priorities. Next Steps: Apply today, the client is looking for someone to interview immediately and start asap! Please apply today with your up to date CV and contact details If you have trouble uploading your CV, please email it to (url removed) and put the job title as the subject Working as a temp is an ideal way of exploring different job roles and industries. It's also gives you control of your own work/life balance. Here are just some of the benefits you can expect when you become part of the Office Angels team: Employed directly with Office Angels, meaning we're always on hand to ensure you're being well looked after Eye care vouchers and money towards glasses should you require them for VDU purposes We can search for permanent work whilst you're in assignments and offer expert interview support and advice Weekly pay Pension scheme option (with employer contributions) 28 days paid annual leave (Based on a weekly accrual) By registering with Office Angels you will benefit from the support of a dedicated and experienced recruitment consultant, have access to various interviewing techniques, regular updates of the local employment market and consistent feedback on all applications. This service is offered right through to the day you start your new role and beyond. Office Angels are an equal opportunity employer and are acting as a recruitment agency for this vacancy. Please be aware we receive a lot of applicants for our roles if you have not been contacted within the next 72 hours of applying for this role on this occasion you have not been successful but please go to our website for more vacancies - (url removed). Office Angels is an employment agency and business. We are an equal-opportunities employer who puts expertise, energy and enthusiasm into improving everyone's chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, abilities and more. By showcasing talents, skills and unique experiences in an inclusive environment, we help individuals thrive. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Office Angels acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Office Angels UK is an Equal Opportunities Employer. By applying for this role your details will be submitted to Office Angels. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
