Lead Engineer Commutable from Telford, Stone, Stafford, Wolverhampton and surrounding areas Working Hours: 4 on 4 off We are delighted to be supporting exclusively, a major player in the manufacturing sector to assist with the recruitment of a experienced engineering senior About The Role Reporting to Head of Engineering Preventative planned maintenance planning. Carry out Root Cause Analysis Providing support and guidance to the maintenance teams Progressive pathways available for driven candidates About The Candidate: Minimum 2 years experience in a senior engineering position, in a high-volume, fast-moving environment. Level 3 NVQ / HNC in engineering OR Time Served Engineer Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, whilst maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.
Oct 07, 2025
Full time
Lead Engineer Commutable from Telford, Stone, Stafford, Wolverhampton and surrounding areas Working Hours: 4 on 4 off We are delighted to be supporting exclusively, a major player in the manufacturing sector to assist with the recruitment of a experienced engineering senior About The Role Reporting to Head of Engineering Preventative planned maintenance planning. Carry out Root Cause Analysis Providing support and guidance to the maintenance teams Progressive pathways available for driven candidates About The Candidate: Minimum 2 years experience in a senior engineering position, in a high-volume, fast-moving environment. Level 3 NVQ / HNC in engineering OR Time Served Engineer Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, whilst maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.
CMM Programmer Blackburn Competitive + Benefits Days Only (Mon-Thurs), gap technical are proud to be representing this global manufacturing business in their search for a Job Title to work at their facility based near Blackburn Performance Objectives The successful candidate will be responsible for ensuring precision and quality in manufactured components by programming and operating Coordinate Measuring Machines (CMMs) to inspect parts against engineering specifications and standards. Develop and write CMM programs using software such as PC-DMIS. Operate CMM equipment and FARO arms to inspect first-off, in-process, and final components. Interpret engineering drawings, GD&T (Geometric Dimensioning and Tolerancing), and 3D models. Analyse measurement data and generate detailed inspection reports. Collaborate with production and quality teams to resolve dimensional issues. Maintain and calibrate CMM equipment and ensure proper documentation. Support continuous improvement initiatives related to quality and inspection processes. Train other staff on CMM usage and inspection techniques as needed. Person Specification Proven experience in CMM programming and operation. Hands-on experience with FARO Arm or similar portable CMM technology. Strong understanding of GD&T and mechanical inspection techniques. Proficiency in CMM software (e.g., PC-DMIS, Calypso) and FARO software (e.g., CAM2). Ability to read and interpret technical drawings and CAD models. Attention to detail and strong analytical skills. Good communication and teamwork abilities. NVQ/HNC/HND in Mechanical Engineering or related field. Experience with other metrology tools (e.g., micrometres, height gauges, surface plates). Familiarity with ISO 9001 or AS9100 quality standards. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 14/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Oct 07, 2025
Full time
CMM Programmer Blackburn Competitive + Benefits Days Only (Mon-Thurs), gap technical are proud to be representing this global manufacturing business in their search for a Job Title to work at their facility based near Blackburn Performance Objectives The successful candidate will be responsible for ensuring precision and quality in manufactured components by programming and operating Coordinate Measuring Machines (CMMs) to inspect parts against engineering specifications and standards. Develop and write CMM programs using software such as PC-DMIS. Operate CMM equipment and FARO arms to inspect first-off, in-process, and final components. Interpret engineering drawings, GD&T (Geometric Dimensioning and Tolerancing), and 3D models. Analyse measurement data and generate detailed inspection reports. Collaborate with production and quality teams to resolve dimensional issues. Maintain and calibrate CMM equipment and ensure proper documentation. Support continuous improvement initiatives related to quality and inspection processes. Train other staff on CMM usage and inspection techniques as needed. Person Specification Proven experience in CMM programming and operation. Hands-on experience with FARO Arm or similar portable CMM technology. Strong understanding of GD&T and mechanical inspection techniques. Proficiency in CMM software (e.g., PC-DMIS, Calypso) and FARO software (e.g., CAM2). Ability to read and interpret technical drawings and CAD models. Attention to detail and strong analytical skills. Good communication and teamwork abilities. NVQ/HNC/HND in Mechanical Engineering or related field. Experience with other metrology tools (e.g., micrometres, height gauges, surface plates). Familiarity with ISO 9001 or AS9100 quality standards. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 14/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Maintenance Engineer Salary: 48,000 Location: Deeside Continental Days & Nights (2Days/2nights/4off) gap technical are proud to be representing this global manufacturing business in their search for a Maintenance Engineer to work at their facility based near - Location Performance Objectives Work closely with their Line Manager, taking responsibility for delivering a high-quality engineering service in support of the achievement of operational targets. Continuously work to improve the performance of People and Plant to deliver site efficiency and performance standards. Complete the full range of maintenance activities across the entire installed asset base within the area that they work. Rapidly diagnose and resolve mechanical, electrical and basic control & instrumentation faults, within skill levels. Complete all work allocated to a high standard, having the ability to complete all maintenance tasks across the installed asset base. Working as a key member of the Engineering team, demonstrating Company Values and flexibility to support other teams/departments where required. Reporting any non-conformances to Company Policies/Procedures/Standards and supporting corrective action activities. Supporting the delivery of key performance indicators for the Factory linked to Safety, Quality, People, Delivery, and Cost standards. Pro-actively identifying areas for continuous improvement within the production work environment/equipment/systems. Demonstrating a willingness to develop within the role to achieve Excellent Competency Levels. Person Specification Time served Electrical or Mechanical Engineering Apprenticeship Level 3 City & Guilds / ONC / BTEC Food Safety Level 2 HACCP Level 2 Statutory Legislation IPAF or equivalent IEE wiring regulations (current edition) Ability to understand and to work to approved Standards / Safe Operating Procedures Good understanding and awareness of Safety and Quality Standards within a workplace Experience within an environment working to set Standards and key performance indicators Experience inputting and analysing data Basic user of Microsoft Office - Outlook, Excel, Word, PowerPoint Desirable Skills Powered Pallet Truck Licence MHE licences IOSH Managing Safely Understanding of Continuous Improvement or Lean Manufacturing Approaches Ability to Fault Find on Equipment Groups/Machinery Ability to Participate in Root Cause Analysis Assessments Understanding of Waste Reduction and Yield Management Approaches Understanding of Risk Assessment Processes. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 05.10.2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Oct 06, 2025
Full time
Maintenance Engineer Salary: 48,000 Location: Deeside Continental Days & Nights (2Days/2nights/4off) gap technical are proud to be representing this global manufacturing business in their search for a Maintenance Engineer to work at their facility based near - Location Performance Objectives Work closely with their Line Manager, taking responsibility for delivering a high-quality engineering service in support of the achievement of operational targets. Continuously work to improve the performance of People and Plant to deliver site efficiency and performance standards. Complete the full range of maintenance activities across the entire installed asset base within the area that they work. Rapidly diagnose and resolve mechanical, electrical and basic control & instrumentation faults, within skill levels. Complete all work allocated to a high standard, having the ability to complete all maintenance tasks across the installed asset base. Working as a key member of the Engineering team, demonstrating Company Values and flexibility to support other teams/departments where required. Reporting any non-conformances to Company Policies/Procedures/Standards and supporting corrective action activities. Supporting the delivery of key performance indicators for the Factory linked to Safety, Quality, People, Delivery, and Cost standards. Pro-actively identifying areas for continuous improvement within the production work environment/equipment/systems. Demonstrating a willingness to develop within the role to achieve Excellent Competency Levels. Person Specification Time served Electrical or Mechanical Engineering Apprenticeship Level 3 City & Guilds / ONC / BTEC Food Safety Level 2 HACCP Level 2 Statutory Legislation IPAF or equivalent IEE wiring regulations (current edition) Ability to understand and to work to approved Standards / Safe Operating Procedures Good understanding and awareness of Safety and Quality Standards within a workplace Experience within an environment working to set Standards and key performance indicators Experience inputting and analysing data Basic user of Microsoft Office - Outlook, Excel, Word, PowerPoint Desirable Skills Powered Pallet Truck Licence MHE licences IOSH Managing Safely Understanding of Continuous Improvement or Lean Manufacturing Approaches Ability to Fault Find on Equipment Groups/Machinery Ability to Participate in Root Cause Analysis Assessments Understanding of Waste Reduction and Yield Management Approaches Understanding of Risk Assessment Processes. Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 05.10.2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Gap Technical Ltd
Welwyn Garden City, Hertfordshire
Metal Polisher / Finisher Monday - Friday 10am-6pm Competitive + OT Temp to Perm Hatfield / Welwyn Garden City gap technical are proud to be representing this global manufacturing business in their search for a Metal Polisher / Finisher to work at their facility based near Hatfield / Welwyn Garden City. Performance Objectives Responsible for ensuring specific polishing trimming operations are carried out Fully competent in grinding, drilling, punching and using band saws. Experience in using measuring equipment such as Vernier callipers/protractors & Micrometers. Ensure that work is conducted in a safe environment according to safe practices - report deviation from H&S good practice immediately. Person Specification Some basic self-inspection required Health & Safety Training. Knowledge of polishing lathes and various polishing equipment; Knowledge of Health & Safety requirements relating to polishing and spraying machines Experience in a Metal Polishing / Trimming working environment Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 07/11/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Oct 06, 2025
Full time
Metal Polisher / Finisher Monday - Friday 10am-6pm Competitive + OT Temp to Perm Hatfield / Welwyn Garden City gap technical are proud to be representing this global manufacturing business in their search for a Metal Polisher / Finisher to work at their facility based near Hatfield / Welwyn Garden City. Performance Objectives Responsible for ensuring specific polishing trimming operations are carried out Fully competent in grinding, drilling, punching and using band saws. Experience in using measuring equipment such as Vernier callipers/protractors & Micrometers. Ensure that work is conducted in a safe environment according to safe practices - report deviation from H&S good practice immediately. Person Specification Some basic self-inspection required Health & Safety Training. Knowledge of polishing lathes and various polishing equipment; Knowledge of Health & Safety requirements relating to polishing and spraying machines Experience in a Metal Polishing / Trimming working environment Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 07/11/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Mechanical Fitter 37,791 Widnes Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Mechanical Fitter / Technician / Craftsman to work at their facility based near Widnes Performance Objectives Design, select, maintain and install mechanical equipment Carry out mechanical preventive maintenance Fault location / diagnosis / repair Will be expected to undertake confined space training Will be expected to undertake First Aid training Will be expected to participate in the site Emergency Response team Will be expected to participate in various improvement initiatives Overtime will be available after 40 hours have been worked in a week, overtime premium rates are paid at time and a half on Monday to Saturday and double time on Sundays. The candidate would be expected to be on an on-call rota (one week in four) covering critical breakdowns. Person Specification Must hold apprenticeship or equivalent qualifications in a Mechanical discipline i.e. NVQ level 3 or C&G Apprenticeship. Further relevant qualifications would be advantageous Good computer skills are essential. Experience of using preventive maintenance software is an advantage. A working knowledge of Health & Safety at Work Act is essential Experience in the chemical industry is not vital but a manufacturing background would be advantageous Lean Manufacturing knowledge (5S, Kaizen & 7 wastes) advantageous Metal and/or plastic fabrication. Rotating equipment overhauls Hydraulic/pneumatics systems Pipework and flange making/breaking Knowledge of steam boiler and air compressor plant Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 08/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Oct 06, 2025
Full time
Mechanical Fitter 37,791 Widnes Days Only (Mon-Fri) gap technical are proud to be representing this global manufacturing business in their search for a Mechanical Fitter / Technician / Craftsman to work at their facility based near Widnes Performance Objectives Design, select, maintain and install mechanical equipment Carry out mechanical preventive maintenance Fault location / diagnosis / repair Will be expected to undertake confined space training Will be expected to undertake First Aid training Will be expected to participate in the site Emergency Response team Will be expected to participate in various improvement initiatives Overtime will be available after 40 hours have been worked in a week, overtime premium rates are paid at time and a half on Monday to Saturday and double time on Sundays. The candidate would be expected to be on an on-call rota (one week in four) covering critical breakdowns. Person Specification Must hold apprenticeship or equivalent qualifications in a Mechanical discipline i.e. NVQ level 3 or C&G Apprenticeship. Further relevant qualifications would be advantageous Good computer skills are essential. Experience of using preventive maintenance software is an advantage. A working knowledge of Health & Safety at Work Act is essential Experience in the chemical industry is not vital but a manufacturing background would be advantageous Lean Manufacturing knowledge (5S, Kaizen & 7 wastes) advantageous Metal and/or plastic fabrication. Rotating equipment overhauls Hydraulic/pneumatics systems Pipework and flange making/breaking Knowledge of steam boiler and air compressor plant Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 08/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Lead Engineer Commutable from Telford, Stone, Stafford, Wolverhampton and surrounding areas Working Hours: 4 on 4 off We are delighted to be supporting exclusively, a major player in the manufacturing sector to assist with the recruitment of a experienced engineering senior About The Role Reporting to Head of Engineering Preventative planned maintenance planning. Carry out Root Cause Analysis Providing support and guidance to the maintenance teams Progressive pathways available for driven candidates About The Candidate: Minimum 2 years experience in a senior engineering position, in a high-volume, fast-moving environment. Level 3 NVQ / HNC in engineering OR Time Served Engineer Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, whilst maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.
Oct 06, 2025
Full time
Lead Engineer Commutable from Telford, Stone, Stafford, Wolverhampton and surrounding areas Working Hours: 4 on 4 off We are delighted to be supporting exclusively, a major player in the manufacturing sector to assist with the recruitment of a experienced engineering senior About The Role Reporting to Head of Engineering Preventative planned maintenance planning. Carry out Root Cause Analysis Providing support and guidance to the maintenance teams Progressive pathways available for driven candidates About The Candidate: Minimum 2 years experience in a senior engineering position, in a high-volume, fast-moving environment. Level 3 NVQ / HNC in engineering OR Time Served Engineer Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, whilst maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.
Automated Warehouse Engineer Days/Nights/Weekends £58,437.84 Ellesmere Port gap technical are seeking an Automated Warehouse Engineer to join our client. This role offers the chance to be a key part of a fast-paced, high-tech logistics operation. As an Automated Warehouse Engineer, you will ensure the continuous running and efficiency of cranes, conveyors, elevators, shuttle cars, and the Log click apply for full job details
Oct 06, 2025
Full time
Automated Warehouse Engineer Days/Nights/Weekends £58,437.84 Ellesmere Port gap technical are seeking an Automated Warehouse Engineer to join our client. This role offers the chance to be a key part of a fast-paced, high-tech logistics operation. As an Automated Warehouse Engineer, you will ensure the continuous running and efficiency of cranes, conveyors, elevators, shuttle cars, and the Log click apply for full job details
Maintenance Engineer Crewe £30.15 per hour (PAYE) Shift Pattern: 4 on, 4 off (Days/Nights) gap technical is proud to represent an industry-leading business in their search for a Contract Maintenance Engineer to join their team. Key Responsibilities Provide fast and effective maintenance support by responding to equipment breakdowns click apply for full job details
Oct 06, 2025
Contractor
Maintenance Engineer Crewe £30.15 per hour (PAYE) Shift Pattern: 4 on, 4 off (Days/Nights) gap technical is proud to represent an industry-leading business in their search for a Contract Maintenance Engineer to join their team. Key Responsibilities Provide fast and effective maintenance support by responding to equipment breakdowns click apply for full job details
Maintenance Engineer £35.00 Per Hour Wrexham 4 on 4 off (2 days/2nights) gap technical are proud to be representing an established manufacturing business in their search for an Multi Skilled Maintenance Engineer to work at their facility based near Wrexham Performance Objectives Minimise downtime through close attention to regular maintenance of equipment click apply for full job details
Oct 05, 2025
Full time
Maintenance Engineer £35.00 Per Hour Wrexham 4 on 4 off (2 days/2nights) gap technical are proud to be representing an established manufacturing business in their search for an Multi Skilled Maintenance Engineer to work at their facility based near Wrexham Performance Objectives Minimise downtime through close attention to regular maintenance of equipment click apply for full job details
Process Operator (Chemical) 37,900 3x Shift (Earlies/Lates/Nights) Widnes gap technical are proud to be representing this global manufacturing business in their search for a Process Technician to work at their facility based near Widnes Performance Objectives Operating a variety of chemical plant and equipment following detailed process instructions and completion of process records control / troubleshooting of multiple production processes Includes simple in-process analytical testing Involves regular manual handling of chemicals Involves periodic decontamination of equipment for statutory inspections Will be expected to undertake First Aid training Will be expected to participate in the site Emergency Response team Will be expected to participate in process and EHS improvements Person Specification NVQ2 or equivalent Previous Loader/Operator experience preferably Shift worker COMAH Experience advantageous Basic numeracy and literacy essential Basic computer skills advantageous Counterbalance FLT licence advantageous Lean Manufacturing knowledge (5S, Kaizen & 7 wastes) advantageous Experience in the chemical industry is not vital but a manufacturing background would be advantageous Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 05/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Oct 03, 2025
Full time
Process Operator (Chemical) 37,900 3x Shift (Earlies/Lates/Nights) Widnes gap technical are proud to be representing this global manufacturing business in their search for a Process Technician to work at their facility based near Widnes Performance Objectives Operating a variety of chemical plant and equipment following detailed process instructions and completion of process records control / troubleshooting of multiple production processes Includes simple in-process analytical testing Involves regular manual handling of chemicals Involves periodic decontamination of equipment for statutory inspections Will be expected to undertake First Aid training Will be expected to participate in the site Emergency Response team Will be expected to participate in process and EHS improvements Person Specification NVQ2 or equivalent Previous Loader/Operator experience preferably Shift worker COMAH Experience advantageous Basic numeracy and literacy essential Basic computer skills advantageous Counterbalance FLT licence advantageous Lean Manufacturing knowledge (5S, Kaizen & 7 wastes) advantageous Experience in the chemical industry is not vital but a manufacturing background would be advantageous Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 05/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Laboratory Technician Competitive + Benefits + Annual Bonus Welwyn Garden City Days Only (Mon-Fri) gap technical are proud to be representing this manufacturing business in their search for a Laboratory Technician to work at their facility based near Welwyn Garden City Performance Objectives Hydrogen content testing Tensile Testing Vickers Micro-hardness & Rockwell hardness testing Grain size Tests Bend test Potting-up & polishing samples for Metallographic testing Alpha Case Testing Intergranular Attack Testing Heat Affected Zone Testing Daily and Weekly Analysis of chemical process tanks, calculating & recommending additions of solution top-ups / New make-up Manage laboratory stock levels, obtain quotes, order consumables, book goods in Support test piece preparation (punching, cutting, drilling etc.) Housekeeping duties Participate in laboratory audits both internal and external Proficient in the use of Microsoft Office (word, excel etc.) Operator overchecks Internal Calibration of equipment Archive/Storage of Test pieces Person Specification Degree educated in a material science or minimum of 3 years working in a material testing laboratory. Working in a fast-paced environment Ability to manage your time efficiently Working with multiple stakeholders Desirable Knowledge of aerospace quality management systems Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 29/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
Sep 25, 2025
Full time
Laboratory Technician Competitive + Benefits + Annual Bonus Welwyn Garden City Days Only (Mon-Fri) gap technical are proud to be representing this manufacturing business in their search for a Laboratory Technician to work at their facility based near Welwyn Garden City Performance Objectives Hydrogen content testing Tensile Testing Vickers Micro-hardness & Rockwell hardness testing Grain size Tests Bend test Potting-up & polishing samples for Metallographic testing Alpha Case Testing Intergranular Attack Testing Heat Affected Zone Testing Daily and Weekly Analysis of chemical process tanks, calculating & recommending additions of solution top-ups / New make-up Manage laboratory stock levels, obtain quotes, order consumables, book goods in Support test piece preparation (punching, cutting, drilling etc.) Housekeeping duties Participate in laboratory audits both internal and external Proficient in the use of Microsoft Office (word, excel etc.) Operator overchecks Internal Calibration of equipment Archive/Storage of Test pieces Person Specification Degree educated in a material science or minimum of 3 years working in a material testing laboratory. Working in a fast-paced environment Ability to manage your time efficiently Working with multiple stakeholders Desirable Knowledge of aerospace quality management systems Apply Please send your CV via the Apply now option on the website If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch This vacancy is being advertised on behalf of gap technical who are operating as an employment agency. gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Closing Date: 29/10/2025 "By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy."
