We are seeking an experienced and motivated Project Runner to lead and coordinate construction and refurbishment projects through the full range of the RIBA Plan of Work stages (0 7), from initial inception through to completion, handover and post-occupancy review. The role will primarily involve the delivery of small to medium-scale refurbishment, alteration and improvement projects, typically ranging in value from approximately £5K to £500K, although projects outside of this range may occasionally arise. The successful candidate will act as the day-to-day project lead, managing projects on behalf of the client department and ensuring that schemes are developed, procured and delivered in accordance with programme, budget, statutory requirements and quality expectations. Key Responsibilities Lead projects through all RIBA stages from feasibility through to completion and final account. Liaise directly with client departments to establish, develop and refine project briefs, objectives and operational requirements. Work collaboratively with the in-house Quantity Surveying team to establish project budgets, cost plans and procurement strategies. Assist in the appointment and coordination of external consultants and specialist advisors where required through appropriate procurement processes, including:Principal Designer (CDM Regulations)Building Regulations Principal DesignerStructural EngineersMechanical & Electrical ConsultantsSpecialist Surveyors and DesignersUndertake site visits, surveys and investigations to inform design development. Prepare and develop:Feasibility layoutsPlanning and Building Regulations drawings Tender drawings Construction and working drawing packages Assembly and detailing drawingsProduce specifications using NBS or equivalent specification systems. Utilise existing asset management information, survey data and record drawings in the preparation of project documentation. Coordinate and manage the design process to ensure compliance with: Building Regulations Planning requirements CDM Regulations Relevant British Standards and industry guidance Internal client standards and procedures Support tendering activities in conjunction with the Quantity Surveying team, including responding to tender queries and reviewing contractor submissions. Administer and monitor construction works on site, including: Chairing progress meetings Undertaking site inspections Monitoring quality and progress Reviewing contractor information Managing design changes and technical queries Assist with project reporting, risk management and programme monitoring throughout the project lifecycle. Ensure accurate project records and documentation are maintained throughout delivery. Support handover, defects management and post-completion activities. Essential Requirements Experience of delivering construction or refurbishment projects through multiple RIBA Plan of Work stages. Experience preparing technical drawings and construction information using CAD software. Good understanding of construction detailing, building technology and refurbishment works. Experience producing specifications using NBS or similar systems. Understanding of procurement and contract administration processes. Working knowledge of: Building Regulations Planning processes CDM Regulations Health & Safety requirements in construction Ability to coordinate multiple stakeholders and consultants effectively. Strong organisational and communication skills. Ability to manage workload across multiple projects simultaneously. Competent in Microsoft Office applications and project administration. Full UK driving licence and ability to attend sites across the district as required. Support Structure The successful candidate will work closely with an established in-house Quantity Surveying team who will provide support in relation to: Cost planning and cost control Procurement and tendering Contract administration support Financial reporting and valuations Technical and managerial support will also be available from the wider Design Services team and external specialist consultants where required
May 15, 2026
Contractor
We are seeking an experienced and motivated Project Runner to lead and coordinate construction and refurbishment projects through the full range of the RIBA Plan of Work stages (0 7), from initial inception through to completion, handover and post-occupancy review. The role will primarily involve the delivery of small to medium-scale refurbishment, alteration and improvement projects, typically ranging in value from approximately £5K to £500K, although projects outside of this range may occasionally arise. The successful candidate will act as the day-to-day project lead, managing projects on behalf of the client department and ensuring that schemes are developed, procured and delivered in accordance with programme, budget, statutory requirements and quality expectations. Key Responsibilities Lead projects through all RIBA stages from feasibility through to completion and final account. Liaise directly with client departments to establish, develop and refine project briefs, objectives and operational requirements. Work collaboratively with the in-house Quantity Surveying team to establish project budgets, cost plans and procurement strategies. Assist in the appointment and coordination of external consultants and specialist advisors where required through appropriate procurement processes, including:Principal Designer (CDM Regulations)Building Regulations Principal DesignerStructural EngineersMechanical & Electrical ConsultantsSpecialist Surveyors and DesignersUndertake site visits, surveys and investigations to inform design development. Prepare and develop:Feasibility layoutsPlanning and Building Regulations drawings Tender drawings Construction and working drawing packages Assembly and detailing drawingsProduce specifications using NBS or equivalent specification systems. Utilise existing asset management information, survey data and record drawings in the preparation of project documentation. Coordinate and manage the design process to ensure compliance with: Building Regulations Planning requirements CDM Regulations Relevant British Standards and industry guidance Internal client standards and procedures Support tendering activities in conjunction with the Quantity Surveying team, including responding to tender queries and reviewing contractor submissions. Administer and monitor construction works on site, including: Chairing progress meetings Undertaking site inspections Monitoring quality and progress Reviewing contractor information Managing design changes and technical queries Assist with project reporting, risk management and programme monitoring throughout the project lifecycle. Ensure accurate project records and documentation are maintained throughout delivery. Support handover, defects management and post-completion activities. Essential Requirements Experience of delivering construction or refurbishment projects through multiple RIBA Plan of Work stages. Experience preparing technical drawings and construction information using CAD software. Good understanding of construction detailing, building technology and refurbishment works. Experience producing specifications using NBS or similar systems. Understanding of procurement and contract administration processes. Working knowledge of: Building Regulations Planning processes CDM Regulations Health & Safety requirements in construction Ability to coordinate multiple stakeholders and consultants effectively. Strong organisational and communication skills. Ability to manage workload across multiple projects simultaneously. Competent in Microsoft Office applications and project administration. Full UK driving licence and ability to attend sites across the district as required. Support Structure The successful candidate will work closely with an established in-house Quantity Surveying team who will provide support in relation to: Cost planning and cost control Procurement and tendering Contract administration support Financial reporting and valuations Technical and managerial support will also be available from the wider Design Services team and external specialist consultants where required
Futures are looking to appoint an experienced Quality Manager to lead quality assurance, customer support, and continuous improvement activities within a manufacturing environment. This role is responsible for ensuring products and services meet established quality standards while delivering an exceptional aftersales experience for customers. Key Responsibilities Develop, implement, and maintain quality and business management systems and procedures. Lead internal and external audits, ensuring compliance with ISO standards and industry regulations. Analyse quality data, identify root causes, and drive corrective and preventive actions to improve operational performance. Manage customer complaints, warranty claims, and aftersales support cases from initial enquiry through to final resolution. Act as the main point of contact for customers regarding technical aftersales enquiries and complaint handling. Coordinate cross-functional investigations and ensure effective communication with customers throughout the resolution process. Monitor and report key aftersales and quality performance metrics. Drive continuous improvement initiatives to enhance efficiency, reduce defects, and improve customer satisfaction. Attend customer and site meetings as required. Skills & Experience Proven leadership and management experience within a quality, aftersales, or customer support function in a manufacturing environment. Strong knowledge of quality management systems and continuous improvement methodologies such as Six Sigma, Lean Management, or TQM. Expertise in ISO standards, audits, compliance, and corrective action processes. Excellent communication and stakeholder management skills, with the ability to liaise confidently with customers and internal teams. Strong analytical and problem-solving abilities with a hands-on approach. Experience within electrical engineering, power distribution, heavy industrial manufacturing, or a similar technical engineering environment would be highly advantageous. Experience using ERP/MRP systems is desirable. Ability to manage multiple priorities and work effectively to strict deadlines. Full UK driving licence required
May 15, 2026
Full time
Futures are looking to appoint an experienced Quality Manager to lead quality assurance, customer support, and continuous improvement activities within a manufacturing environment. This role is responsible for ensuring products and services meet established quality standards while delivering an exceptional aftersales experience for customers. Key Responsibilities Develop, implement, and maintain quality and business management systems and procedures. Lead internal and external audits, ensuring compliance with ISO standards and industry regulations. Analyse quality data, identify root causes, and drive corrective and preventive actions to improve operational performance. Manage customer complaints, warranty claims, and aftersales support cases from initial enquiry through to final resolution. Act as the main point of contact for customers regarding technical aftersales enquiries and complaint handling. Coordinate cross-functional investigations and ensure effective communication with customers throughout the resolution process. Monitor and report key aftersales and quality performance metrics. Drive continuous improvement initiatives to enhance efficiency, reduce defects, and improve customer satisfaction. Attend customer and site meetings as required. Skills & Experience Proven leadership and management experience within a quality, aftersales, or customer support function in a manufacturing environment. Strong knowledge of quality management systems and continuous improvement methodologies such as Six Sigma, Lean Management, or TQM. Expertise in ISO standards, audits, compliance, and corrective action processes. Excellent communication and stakeholder management skills, with the ability to liaise confidently with customers and internal teams. Strong analytical and problem-solving abilities with a hands-on approach. Experience within electrical engineering, power distribution, heavy industrial manufacturing, or a similar technical engineering environment would be highly advantageous. Experience using ERP/MRP systems is desirable. Ability to manage multiple priorities and work effectively to strict deadlines. Full UK driving licence required
Northallerton, North Yorkshire, GB, DL7 9NJ Contract Type: Full Time Who we are VIVO provides facilities management and accommodation maintenance for the UK military and its partners. VIVO embodies both experience and innovation. What we do We put our Customers and Families First. They are the driving force behind everything we do. We drive forward improvements for them to ensure the service they receive, whether reactive repairs or a major project, is completed safely and on time. In order to achieve this, we have 4 core values: open, caring, agile and collaborative. These are at the heart of everything we do. Location: RAF Leeming, on site role Permanent, Full time Salary: £42,000 We are looking for an experienced Service Manager to lead the safe, compliant and effective delivery of planned and reactive maintenance services across the VIVO contract. You will play a key role in ensuring that maintenance activities are delivered in line with statutory legislation, MoD mandatory requirements and VIVO's Health, Safety and Environmental standards, while consistently achieving performance, quality and value-for-money targets. Working closely with supply chain partners and site-based teams, you will coordinate day to day service delivery, ensuring that suitably qualified operatives are deployed with the correct equipment, skills and authorisations. You will be responsible for overseeing safe systems of work, reviewing Risk Assessments and Method Statements, and ensuring all activity is accurately recorded through the CAFM system with supporting documentation completed on time. A significant part of the role involves building strong working relationships with Defence Infrastructure Organisation representatives, end users and internal stakeholders. Acting as a key point of contact, you will support the resolution of operational issues and complaints, contribute to the development of additional works, and provide professional and technical advice to support estate operations. You will also manage small billable works, including producing rough orders of cost and ensuring works are delivered efficiently and commercially. As a Service Manager, you will lead by example, embedding a positive safety culture and providing clear supervision, coaching and direction to teams to ensure service levels are met. You will balance operational priorities with commercial awareness, managing costs, mitigating risk and contributing to forward maintenance planning to support a profitable and sustainable contract. About you You will have practical experience working within planned and reactive maintenance environments, ideally with responsibility for small project delivery. You will hold an HNC (or equivalent experience) in a building, civil, electrical or mechanical discipline, alongside a management level Health & Safety qualification such as SMSTS. Strong IT skills are essential, with confidence using Microsoft Office and CAFM systems. Technical competency is essential for this role. You will be comfortable taking on additional responsibilities such as Legionella, Asbestos, Confined Space or Working at Height Authorised Person roles, with training provided where required. Above all, you will be a confident communicator with strong relationship management skills, able to influence stakeholders, make sound decisions and drive high standards of delivery in a regulated, safety critical environment. What We Offer 6% employee matched pension contribution 25 days annual leave Single private medical cover Life assurance 2x annual salary VIVO Defence Services The role you have applied for is with VIVO Defence Services, a joint venture between Serco and EQUANS. By applying for this role, please be aware that information contained within your CV may be shared between VIVO Defence Services, Serco and EQUANS during the recruitment process. At VIVO, we are committed to building a diverse and inclusive organisation that supports the needs of all. Therefore, we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working and operate a hybrid work structure in many of our business areas. We are proudly a Disability Confident Leader. Disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
May 15, 2026
Full time
Northallerton, North Yorkshire, GB, DL7 9NJ Contract Type: Full Time Who we are VIVO provides facilities management and accommodation maintenance for the UK military and its partners. VIVO embodies both experience and innovation. What we do We put our Customers and Families First. They are the driving force behind everything we do. We drive forward improvements for them to ensure the service they receive, whether reactive repairs or a major project, is completed safely and on time. In order to achieve this, we have 4 core values: open, caring, agile and collaborative. These are at the heart of everything we do. Location: RAF Leeming, on site role Permanent, Full time Salary: £42,000 We are looking for an experienced Service Manager to lead the safe, compliant and effective delivery of planned and reactive maintenance services across the VIVO contract. You will play a key role in ensuring that maintenance activities are delivered in line with statutory legislation, MoD mandatory requirements and VIVO's Health, Safety and Environmental standards, while consistently achieving performance, quality and value-for-money targets. Working closely with supply chain partners and site-based teams, you will coordinate day to day service delivery, ensuring that suitably qualified operatives are deployed with the correct equipment, skills and authorisations. You will be responsible for overseeing safe systems of work, reviewing Risk Assessments and Method Statements, and ensuring all activity is accurately recorded through the CAFM system with supporting documentation completed on time. A significant part of the role involves building strong working relationships with Defence Infrastructure Organisation representatives, end users and internal stakeholders. Acting as a key point of contact, you will support the resolution of operational issues and complaints, contribute to the development of additional works, and provide professional and technical advice to support estate operations. You will also manage small billable works, including producing rough orders of cost and ensuring works are delivered efficiently and commercially. As a Service Manager, you will lead by example, embedding a positive safety culture and providing clear supervision, coaching and direction to teams to ensure service levels are met. You will balance operational priorities with commercial awareness, managing costs, mitigating risk and contributing to forward maintenance planning to support a profitable and sustainable contract. About you You will have practical experience working within planned and reactive maintenance environments, ideally with responsibility for small project delivery. You will hold an HNC (or equivalent experience) in a building, civil, electrical or mechanical discipline, alongside a management level Health & Safety qualification such as SMSTS. Strong IT skills are essential, with confidence using Microsoft Office and CAFM systems. Technical competency is essential for this role. You will be comfortable taking on additional responsibilities such as Legionella, Asbestos, Confined Space or Working at Height Authorised Person roles, with training provided where required. Above all, you will be a confident communicator with strong relationship management skills, able to influence stakeholders, make sound decisions and drive high standards of delivery in a regulated, safety critical environment. What We Offer 6% employee matched pension contribution 25 days annual leave Single private medical cover Life assurance 2x annual salary VIVO Defence Services The role you have applied for is with VIVO Defence Services, a joint venture between Serco and EQUANS. By applying for this role, please be aware that information contained within your CV may be shared between VIVO Defence Services, Serco and EQUANS during the recruitment process. At VIVO, we are committed to building a diverse and inclusive organisation that supports the needs of all. Therefore, we will make reasonable adjustments at interview through to employment for our candidates and strongly encourage applications from a diverse candidate pool. We are open to discussions around flexibility and flexible working and operate a hybrid work structure in many of our business areas. We are proudly a Disability Confident Leader. Disabled applicants who meet the minimum criteria for the job will be given the opportunity to demonstrate their abilities at an interview.
Project Director page is loaded Project Directorlocations: GB.United Kingdomtime type: Full timeposted on: Posted Todayjob requisition id: R-153703 Job Description Job DescriptionJob Title: Project Director Location: Chelmsford Join us We have an exciting opportunity for a highly experienced professional to lead our project delivery function. Our team delivers a wide range of lump-sum EPC projects in electrical transmission and distribution projects within the utilities and renewable energy sectors across UK.Reporting to the UK Director of Operations, the successful candidate will be responsible for leading a team of project management professionals to deliver a portfolio of projects from the proposal phase through project execution and closing. Demonstrate visible safety, environmental, and sustainability leadership, which will set the tone for all our project delivery teams. Ensure the compliance with all customer safety management requirements, company systems, applicable laws, and regulations. Foster a culture of integrity and adherence to the highest ethical standards by creating appropriate awareness and understanding of Linxon's Code of Conduct at all levels of project delivery organisation. Good experience with managing PMO office in EPC business. Experience in managing portfolio of Projects & Project Management. Leadership & Project management delivery experience in an EPC business environment for all phases of the projects. Monitor & lead the project management teams from preparing clear and concise proposals through to completion and close out of projects. Be the primary point of contact for the customers regarding all aspects of project delivery. Take ownership of the profit and loss of the projects in your portfolio. Support project managers in meeting the objectives of individual projects. Perform regular visits of project construction sites. Develop robust, effective, and efficient project execution plans at the proposal preparation phase. Oversee the implementation. Develop the resource plan for the portfolio. Build project teams through collaborations with other heads of functions and the recruitment team. Develop a positive team environment. Coach and mentor project management staff. Plan and encourage professional development of project management staff to increase project delivery capabilities, consistent with the highest international standards and industry best practices. Drive continuous improvement of project management systems to enhance performance. Ensure compliance with Linxon polices, standard operating procedures, and customer requirements. Perform robust, effective, and efficient project reviews. Produce regular reports per company policies and standard operating procedures. Qualifications & Experience Required: Bachelor's degree in engineering or construction management from an accredited institution. Extensive years of experience in delivering lump-sum EPC projects as Tier 1 contractor. Preferred candidates will be familiar with the UK's electricity transmission and distribution sector. Good years of experience as project director and portfolio director, as well as previous experience in managing project management /PMO discipline for Tier 1 contractors. Must have strong commercial awareness and understanding of the internationally recognised project management standards. Must have strong risk awareness and risk management skills. About Linxon Shaping energy solutions to empower sustainable connectivity.We combine AtkinsRéalis' project management expertise and Hitachi Energy's industry-leading technological knowledge to create a new company, leveraging the key strengths from both parent partners.Linxon's vision is to deliver the best market offering for turnkey substation projects through world-class power technologies and delivering the highest level of competence in managing infrastructure projects.As a leading engineering company, we help our customers with turnkey substation solutions in the field of power transmission, renewable energy and transportation.In this role, you will have the opportunity to be part of a new company as it evolves and help shape it for the future. If you like new challenges, have an entrepreneurial spirit and are interested in working with other motivated professionals with expertise in the Substations EPC business, then this is the new opportunity for you.To know more about the Linxon please click on the link below. Worker Type Employee Job Type Regular At Linxon, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.
May 15, 2026
Full time
Project Director page is loaded Project Directorlocations: GB.United Kingdomtime type: Full timeposted on: Posted Todayjob requisition id: R-153703 Job Description Job DescriptionJob Title: Project Director Location: Chelmsford Join us We have an exciting opportunity for a highly experienced professional to lead our project delivery function. Our team delivers a wide range of lump-sum EPC projects in electrical transmission and distribution projects within the utilities and renewable energy sectors across UK.Reporting to the UK Director of Operations, the successful candidate will be responsible for leading a team of project management professionals to deliver a portfolio of projects from the proposal phase through project execution and closing. Demonstrate visible safety, environmental, and sustainability leadership, which will set the tone for all our project delivery teams. Ensure the compliance with all customer safety management requirements, company systems, applicable laws, and regulations. Foster a culture of integrity and adherence to the highest ethical standards by creating appropriate awareness and understanding of Linxon's Code of Conduct at all levels of project delivery organisation. Good experience with managing PMO office in EPC business. Experience in managing portfolio of Projects & Project Management. Leadership & Project management delivery experience in an EPC business environment for all phases of the projects. Monitor & lead the project management teams from preparing clear and concise proposals through to completion and close out of projects. Be the primary point of contact for the customers regarding all aspects of project delivery. Take ownership of the profit and loss of the projects in your portfolio. Support project managers in meeting the objectives of individual projects. Perform regular visits of project construction sites. Develop robust, effective, and efficient project execution plans at the proposal preparation phase. Oversee the implementation. Develop the resource plan for the portfolio. Build project teams through collaborations with other heads of functions and the recruitment team. Develop a positive team environment. Coach and mentor project management staff. Plan and encourage professional development of project management staff to increase project delivery capabilities, consistent with the highest international standards and industry best practices. Drive continuous improvement of project management systems to enhance performance. Ensure compliance with Linxon polices, standard operating procedures, and customer requirements. Perform robust, effective, and efficient project reviews. Produce regular reports per company policies and standard operating procedures. Qualifications & Experience Required: Bachelor's degree in engineering or construction management from an accredited institution. Extensive years of experience in delivering lump-sum EPC projects as Tier 1 contractor. Preferred candidates will be familiar with the UK's electricity transmission and distribution sector. Good years of experience as project director and portfolio director, as well as previous experience in managing project management /PMO discipline for Tier 1 contractors. Must have strong commercial awareness and understanding of the internationally recognised project management standards. Must have strong risk awareness and risk management skills. About Linxon Shaping energy solutions to empower sustainable connectivity.We combine AtkinsRéalis' project management expertise and Hitachi Energy's industry-leading technological knowledge to create a new company, leveraging the key strengths from both parent partners.Linxon's vision is to deliver the best market offering for turnkey substation projects through world-class power technologies and delivering the highest level of competence in managing infrastructure projects.As a leading engineering company, we help our customers with turnkey substation solutions in the field of power transmission, renewable energy and transportation.In this role, you will have the opportunity to be part of a new company as it evolves and help shape it for the future. If you like new challenges, have an entrepreneurial spirit and are interested in working with other motivated professionals with expertise in the Substations EPC business, then this is the new opportunity for you.To know more about the Linxon please click on the link below. Worker Type Employee Job Type Regular At Linxon, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences.
Job Title: Mechanical Engineer Location: Nationwide Salary: Depends on experience. Role and Responsibility Design, develop and maintain mechanical systems, components and equipment for commercial, industrial or construction projects. Produce detailed engineering drawings, specifications and technical documentation using CAD software. Carry out calculations, simulations and performance analysis to ensure systems meet operational requirements. Collaborate with project managers, architects, electrical engineers and contractors throughout project lifecycles. Prepare mechanical designs in line with relevant UK building regulations, industry standards and health & safety legislation. Conduct feasibility studies, site inspections and technical assessments for new and existing installations. Support the delivery of HVAC, piping, plumbing, ventilation and mechanical plant systems where required. Develop cost-effective engineering solutions while maintaining quality, safety and efficiency standards. Assist in preparing project programmes, budgets and procurement specifications for mechanical packages. Review and approve technical submittals, supplier quotations and contractor proposals. Liaise with clients and stakeholders to understand project requirements and provide technical guidance. Monitor installation works on-site to ensure compliance with drawings, specifications and programme deadlines. Troubleshoot mechanical issues and provide practical solutions to minimise downtime and project delays. Conduct testing, commissioning and validation of mechanical systems and equipment. Prepare risk assessments, method statements and maintenance procedures where necessary. Ensure all mechanical systems comply with sustainability, energy efficiency and environmental standards. Support preventative maintenance strategies and asset management planning. Maintain accurate project records, reports and engineering documentation. Participate in design reviews, technical meetings and progress updates with internal and external teams. Assist junior engineers, apprentices or technicians with technical support and mentoring. Stay up to date with new technologies, engineering trends and industry best practices. Work closely with procurement teams to source suitable materials, equipment and suppliers. Ensure quality assurance procedures are followed throughout design and installation stages. Contribute to continuous improvement initiatives across engineering and operational processes. Deliver projects within agreed timelines, budgets and performance expectations. if you are interested in the role contact me.
May 15, 2026
Full time
Job Title: Mechanical Engineer Location: Nationwide Salary: Depends on experience. Role and Responsibility Design, develop and maintain mechanical systems, components and equipment for commercial, industrial or construction projects. Produce detailed engineering drawings, specifications and technical documentation using CAD software. Carry out calculations, simulations and performance analysis to ensure systems meet operational requirements. Collaborate with project managers, architects, electrical engineers and contractors throughout project lifecycles. Prepare mechanical designs in line with relevant UK building regulations, industry standards and health & safety legislation. Conduct feasibility studies, site inspections and technical assessments for new and existing installations. Support the delivery of HVAC, piping, plumbing, ventilation and mechanical plant systems where required. Develop cost-effective engineering solutions while maintaining quality, safety and efficiency standards. Assist in preparing project programmes, budgets and procurement specifications for mechanical packages. Review and approve technical submittals, supplier quotations and contractor proposals. Liaise with clients and stakeholders to understand project requirements and provide technical guidance. Monitor installation works on-site to ensure compliance with drawings, specifications and programme deadlines. Troubleshoot mechanical issues and provide practical solutions to minimise downtime and project delays. Conduct testing, commissioning and validation of mechanical systems and equipment. Prepare risk assessments, method statements and maintenance procedures where necessary. Ensure all mechanical systems comply with sustainability, energy efficiency and environmental standards. Support preventative maintenance strategies and asset management planning. Maintain accurate project records, reports and engineering documentation. Participate in design reviews, technical meetings and progress updates with internal and external teams. Assist junior engineers, apprentices or technicians with technical support and mentoring. Stay up to date with new technologies, engineering trends and industry best practices. Work closely with procurement teams to source suitable materials, equipment and suppliers. Ensure quality assurance procedures are followed throughout design and installation stages. Contribute to continuous improvement initiatives across engineering and operational processes. Deliver projects within agreed timelines, budgets and performance expectations. if you are interested in the role contact me.
Security Solutions Architect -Home-Based 54 + 6k car allowance About Us Our client is an Independent Security Systems Integrator, with expertise built over four decades delivering security solutions for high-security, public space, transport, and infrastructure projects throughout the UK and Ireland. Job Description This role will be responsible for defining designs and solution architectures that are robust, cost-effective and are tailored to ensure the utmost value to our customers. A key element of the role is ensuring the design remains truly customer focused, fit for purpose and in line with standards and policies. The principal responsibility of the technical team is to ensure a high quality of technical and commercial input during the bidding process and the smooth transition from design to project delivery. A deep understanding of customer requirements during the design stage is clearly captured, documented, and delivered upon through design, delivery and supporting the transition to service support. Key Responsibilities Prepare commercially compelling designs that wherever possible are compliant to agreed customer requirements or specifications. Pivotal in the production of creative written propositions that succinctly define our offering and where we add value to customer operations. Work collaboratively with Sales, Procurement, and the wider business to identify preferred technology and product sets. Perform site visits and conduct technical surveys whilst working with customers to gather preliminary information regarding design requirements. Provide a leading role in terms of technical support/input in relation to the compilation of tender submissions by liaising with the respective Bid Manager. Undertake design checks and endorse accordingly, prior to design submissions being issued to the client. Prepare, in accordance with the tender documentation and the proposed design, any necessary specifications and drawings for subcontractors and equipment suppliers to bid against. Prepare technical design and solution summaries for inclusion in written tender return/proposal. Liaise closely with Procurement to enable competitive costings to be sought from suppliers and sub-contractors for the equipment and services required. Perform other job-related duties as assigned. Skills & Personal Qualities Team player with a positive, flexible, can-do attitude and the ability to work well under pressure. Enjoys discovering and learning about the latest technology trends. A driven, motivated, self-developer with the ability to use own initiative. Able to assimilate new technical concepts and product information quickly and effectively to explain to others, especially to customers. Good commercial awareness, verbal communication skills, and attention to detail. Uses creativity to solve problems. Able to make technical information easy to understand. Detail-oriented with great time management, organisation, and the ability to work to deadlines. Able to support and inspire others to achieve goals through innovation, quality, and excellence. A flexible approach to work and the ability to adapt to change when necessary. Qualifications A high-level of competence in the design of Electronic Security Systems. A detailed understanding of CCTV (Analogue & IP), Access Control, Intruder Detection, Integrated Security Management Systems (including PSIM), Video Analytics and Wireless Transmission Technologies. An excellent understanding of digital communication infrastructure technologies, including TCP/IP, DNS, DHCP, wireless and LAN networking. An excellent understanding of IT infrastructure including Hardware, Software, Data Centre, and Storage Facilities. Able to evaluate and mitigate cyber security vulnerabilities within designs. A good understanding of virtualisation systems such as VMWare, Hyper-V, and HA. Have a good understanding of cloud services such as Amazon Web Services, Microsoft Azure, IBM Cloud. Excellent written skills to write technical proposals and responses to tender documents. Excellent interpersonal skills. Great customer-facing skills with the ability to assimilate customer feedback into winning propositions. Experience of using software packages: Visio, Excel, Word to intermediate or advanced level and design tools. E.g., JVSG. Have a detailed understanding of the UK security industry. E.g., Products, suppliers, market dynamics and competition. Have a general understanding of Electrical Installations and Civil works to support Security Infrastructure. A general understanding of other IT technologies such as Active Directory, Group Policy, SQL, Certificate Authority, Ai as a service, Predictive analytics etc. What We Offer We offer a range of benefits that help make our client a great place to work. Please note that benefits may vary depending on region and role. Remote & Hybrid Working Supported Flexible Working, Around Core Hours Health & Wellbeing Programme Life Assurance (4 x Annual Salary) 5% Matched Pension Scheme Carry Over Holidays (Up To 5) Reward & Recognition Programme Long Service Rewards Forward Assist Recruitment is operating as an employment agency. Forward Assist Recruitment is an Equal Opportunities employer; we welcome applicants from all backgrounds.
May 15, 2026
Full time
Security Solutions Architect -Home-Based 54 + 6k car allowance About Us Our client is an Independent Security Systems Integrator, with expertise built over four decades delivering security solutions for high-security, public space, transport, and infrastructure projects throughout the UK and Ireland. Job Description This role will be responsible for defining designs and solution architectures that are robust, cost-effective and are tailored to ensure the utmost value to our customers. A key element of the role is ensuring the design remains truly customer focused, fit for purpose and in line with standards and policies. The principal responsibility of the technical team is to ensure a high quality of technical and commercial input during the bidding process and the smooth transition from design to project delivery. A deep understanding of customer requirements during the design stage is clearly captured, documented, and delivered upon through design, delivery and supporting the transition to service support. Key Responsibilities Prepare commercially compelling designs that wherever possible are compliant to agreed customer requirements or specifications. Pivotal in the production of creative written propositions that succinctly define our offering and where we add value to customer operations. Work collaboratively with Sales, Procurement, and the wider business to identify preferred technology and product sets. Perform site visits and conduct technical surveys whilst working with customers to gather preliminary information regarding design requirements. Provide a leading role in terms of technical support/input in relation to the compilation of tender submissions by liaising with the respective Bid Manager. Undertake design checks and endorse accordingly, prior to design submissions being issued to the client. Prepare, in accordance with the tender documentation and the proposed design, any necessary specifications and drawings for subcontractors and equipment suppliers to bid against. Prepare technical design and solution summaries for inclusion in written tender return/proposal. Liaise closely with Procurement to enable competitive costings to be sought from suppliers and sub-contractors for the equipment and services required. Perform other job-related duties as assigned. Skills & Personal Qualities Team player with a positive, flexible, can-do attitude and the ability to work well under pressure. Enjoys discovering and learning about the latest technology trends. A driven, motivated, self-developer with the ability to use own initiative. Able to assimilate new technical concepts and product information quickly and effectively to explain to others, especially to customers. Good commercial awareness, verbal communication skills, and attention to detail. Uses creativity to solve problems. Able to make technical information easy to understand. Detail-oriented with great time management, organisation, and the ability to work to deadlines. Able to support and inspire others to achieve goals through innovation, quality, and excellence. A flexible approach to work and the ability to adapt to change when necessary. Qualifications A high-level of competence in the design of Electronic Security Systems. A detailed understanding of CCTV (Analogue & IP), Access Control, Intruder Detection, Integrated Security Management Systems (including PSIM), Video Analytics and Wireless Transmission Technologies. An excellent understanding of digital communication infrastructure technologies, including TCP/IP, DNS, DHCP, wireless and LAN networking. An excellent understanding of IT infrastructure including Hardware, Software, Data Centre, and Storage Facilities. Able to evaluate and mitigate cyber security vulnerabilities within designs. A good understanding of virtualisation systems such as VMWare, Hyper-V, and HA. Have a good understanding of cloud services such as Amazon Web Services, Microsoft Azure, IBM Cloud. Excellent written skills to write technical proposals and responses to tender documents. Excellent interpersonal skills. Great customer-facing skills with the ability to assimilate customer feedback into winning propositions. Experience of using software packages: Visio, Excel, Word to intermediate or advanced level and design tools. E.g., JVSG. Have a detailed understanding of the UK security industry. E.g., Products, suppliers, market dynamics and competition. Have a general understanding of Electrical Installations and Civil works to support Security Infrastructure. A general understanding of other IT technologies such as Active Directory, Group Policy, SQL, Certificate Authority, Ai as a service, Predictive analytics etc. What We Offer We offer a range of benefits that help make our client a great place to work. Please note that benefits may vary depending on region and role. Remote & Hybrid Working Supported Flexible Working, Around Core Hours Health & Wellbeing Programme Life Assurance (4 x Annual Salary) 5% Matched Pension Scheme Carry Over Holidays (Up To 5) Reward & Recognition Programme Long Service Rewards Forward Assist Recruitment is operating as an employment agency. Forward Assist Recruitment is an Equal Opportunities employer; we welcome applicants from all backgrounds.
Senior Site Manager - West London - New Build Residential (RC Frame) - £80,000 We are supporting a London based Residential Developer with a growing pipeline of New Build (RC Frame High Rise) apartments across London ranging for 80-200 Units. You will be No1 Site Manager on a 10+ storey New Build RC frame apartment block working to a circa 2 year program. The project is on site with piling underway. As a Senior Site Manager reporting to the Project Director you will take the project from Piling through Frame, Internals/Externals to handover, ensuring the project is completed safely, on time, within budget, and to the highest quality standards. This role involves leading and mentoring site staff while coordinating with key stakeholders and establishing relevant standard and processes. You will: Oversee daily operations, ensuring consistent quality and performance. Manage on-site teams, including subcontractors and site supervisors, keeping work in line with the program. Enforce health and safety regulations on site and maintain compliance records. Assist and support site budgets, approve material orders, and manage inventory to control costs, ensuring efficient use of resources. Conduct regular quality checks on all sites, ensuring that all work meets project specifications and building standards, and address/resolve any issues to maintain high quality workmanship. Be familiar with Procore, Microsoft Project. Prepare and present regular project progress reports, updating the program keeping tracking of the project program and documentation. You will have: Ideally a degree or equivalent and must have SMSTS, First Aid Strong ability to read and interpret Architectural, Structural, (Mechanical, and Electrical drawings). Proficiency in construction management software (e.g., Procore, PlanGrid, BIM, Microsoft Office), with the ability to read drawings and basic AutoCAD skills. Knowledge of health and safety regulations and ideally BREAM. And have relevant new Build RC Frame high Rise experience taking projects out of the ground to handover. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
May 15, 2026
Full time
Senior Site Manager - West London - New Build Residential (RC Frame) - £80,000 We are supporting a London based Residential Developer with a growing pipeline of New Build (RC Frame High Rise) apartments across London ranging for 80-200 Units. You will be No1 Site Manager on a 10+ storey New Build RC frame apartment block working to a circa 2 year program. The project is on site with piling underway. As a Senior Site Manager reporting to the Project Director you will take the project from Piling through Frame, Internals/Externals to handover, ensuring the project is completed safely, on time, within budget, and to the highest quality standards. This role involves leading and mentoring site staff while coordinating with key stakeholders and establishing relevant standard and processes. You will: Oversee daily operations, ensuring consistent quality and performance. Manage on-site teams, including subcontractors and site supervisors, keeping work in line with the program. Enforce health and safety regulations on site and maintain compliance records. Assist and support site budgets, approve material orders, and manage inventory to control costs, ensuring efficient use of resources. Conduct regular quality checks on all sites, ensuring that all work meets project specifications and building standards, and address/resolve any issues to maintain high quality workmanship. Be familiar with Procore, Microsoft Project. Prepare and present regular project progress reports, updating the program keeping tracking of the project program and documentation. You will have: Ideally a degree or equivalent and must have SMSTS, First Aid Strong ability to read and interpret Architectural, Structural, (Mechanical, and Electrical drawings). Proficiency in construction management software (e.g., Procore, PlanGrid, BIM, Microsoft Office), with the ability to read drawings and basic AutoCAD skills. Knowledge of health and safety regulations and ideally BREAM. And have relevant new Build RC Frame high Rise experience taking projects out of the ground to handover. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #
Anchor is recruiting an Electrical Working Supervisor to support FM and small-project works across the south surrounding areas. This is a hands-on role leading electricians while carrying out installation, maintenance, and testing tasks. The Role Supervise and work alongside electricians on FM and project jobs Install, maintain, and certify electrical systems Fault-find and resolve technical issues Carry out inspections, testing, and certification Ensure safe, compliant, high-quality work Maintain accurate records and liaise with managers and clients What You'll Need NVQ Level 3 Electrical Installations 18th Edition AM2 Assessment or equivalent 2391 Electrical Inspection & Testing (preferred) Strong leadership and commercial/FM experience Full UK driving licence What We Offer Company van & phone 23 days holiday + bank holidays Pension Ongoing training & progression Interested? Please forward your current CV to or call us on . Take the next step in your electrical career with a growing, forward-thinking company. About Anchor Anchor Pipework Ltd is a well-established mechanical, electrical and HVAC services contractor known for delivering high-quality work across commercial, residential, and industrial sectors. Our success is built on strong teamwork, technical expertise, and a commitment to excellence. At Anchor, you'll be part of a supportive team that encourages continuous learning, career progression, and a hands-on, can-do approach. Interested? Please forward your current CV to or call us on Job Type: Full-time Pay: Up to £50,000.00 per year Benefits: Company pension On-site parking Work Location: In person
May 15, 2026
Full time
Anchor is recruiting an Electrical Working Supervisor to support FM and small-project works across the south surrounding areas. This is a hands-on role leading electricians while carrying out installation, maintenance, and testing tasks. The Role Supervise and work alongside electricians on FM and project jobs Install, maintain, and certify electrical systems Fault-find and resolve technical issues Carry out inspections, testing, and certification Ensure safe, compliant, high-quality work Maintain accurate records and liaise with managers and clients What You'll Need NVQ Level 3 Electrical Installations 18th Edition AM2 Assessment or equivalent 2391 Electrical Inspection & Testing (preferred) Strong leadership and commercial/FM experience Full UK driving licence What We Offer Company van & phone 23 days holiday + bank holidays Pension Ongoing training & progression Interested? Please forward your current CV to or call us on . Take the next step in your electrical career with a growing, forward-thinking company. About Anchor Anchor Pipework Ltd is a well-established mechanical, electrical and HVAC services contractor known for delivering high-quality work across commercial, residential, and industrial sectors. Our success is built on strong teamwork, technical expertise, and a commitment to excellence. At Anchor, you'll be part of a supportive team that encourages continuous learning, career progression, and a hands-on, can-do approach. Interested? Please forward your current CV to or call us on Job Type: Full-time Pay: Up to £50,000.00 per year Benefits: Company pension On-site parking Work Location: In person
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
May 14, 2026
Full time
Electrical Design Engineer - Intermediate Level 30,000 - 40,000 per annum (DOE) North London Office based Overview Are you an experienced Electrical Design Engineer with a passion for sustainability? Join a leading consultancy in building services engineering, renowned for delivering cutting-edge, high-quality engineering designs across commercial, residential, and industrial sectors. We are seeking a talented professional to join our clients team and contribute to their mission of providing best-in-class solutions that exceed industry standards. This is an exciting opportunity to work on diverse projects, manage end-to-end processes, and make a meaningful impact in the field of building services engineering. Benefits Competitive salary of 30,000 - 40,000. Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work on innovative and sustainable projects across various sectors. Exposure to cutting-edge technologies and methodologies in building services engineering. Day-to-Day Designing and developing innovative electrical systems for a variety of building types. Conducting site visits to assess existing systems and gather data for project planning. Collaborating with clients, architects, and contractors to ensure project requirements are met. Preparing detailed technical reports, schematics, and design proposals. Ensuring all designs comply with UK regulations and industry standards. Managing multiple projects simultaneously, ensuring timely and budget-conscious delivery. Responsibilities Electrical Design: Develop electrical layouts for commercial and residential buildings, including power distribution, lighting & lighting control systems, and life safety systems. Site Surveys: Conduct independent site surveys to assess existing systems, gather technical data, and create detailed reports and schematics with actionable recommendations. System Design: Design lighting, CCTV, telecoms, and fire alarm systems. Client Liaison: Confidently present design proposals and reports to clients, explaining technical aspects in clear, non-technical terms. Collaborate with developers, architects, contractors, and designers to ensure project success. Project Collaboration: Work closely with project managers, senior engineers, and other team members to ensure timely project delivery while adhering to safety and regulatory standards. Regulatory Compliance: Ensure all designs meet UK regulations and industry standards, including LET Wiring Regulations, CIBSE guidelines, and BSRIA guides. Qualifications To be successful in this role, you will need: A degree in Electrical Engineering / Mechanical Engineering or a related field (Master's degree preferred). 3-5+ years of experience in UK building services. Proficiency in AutoCAD, Revit, Dialux or Relux, and other relevant design software. Strong understanding of UK building regulations and standards. Excellent communication skills, with the ability to present technical designs and reports to clients and stakeholders. Strong problem-solving skills and attention to detail. Ability to manage multiple projects simultaneously. Effective client-facing communication and presentation skills. A collaborative mindset, with the ability to work independently and within a multidisciplinary team. Sound interesting? Apply now to take the next step.
NMS Recruit Ltd t/a Russell Taylor Group
Stafford, Staffordshire
Control Systems Engineer Stafford / Hybrid Working Are you a Control Systems Engineer who enjoys hands-on PLC and SCADA development? Do you like working on full lifecycle projects from design through to commissioning? Would you value a role that offers flexibility alongside technically interesting work? What's in it for you? Up to 45,000 basic salary 25 days holiday plus bank holidays 5% pension 2 days working from home Private healthcare Death in Service benefit Overtime available Employee rewards scheme What will you be doing? Deliver complex control system projects from concept through to commissioning Develop PLC, SCADA and HMI software Translate user requirements into efficient and reliable control systems Carry out bench testing of software before deployment Support on-site commissioning and SAT activities Work closely with Project Managers and senior engineers to meet project milestones Liaise with clients to ensure systems are delivered and performing as expected Where you'll be doing it You'll be joining one of the UK's largest multidisciplinary design and build contractors, with over 100 years of industry experience. They support clients across Water, Power & Energy, Pharmaceutical, Nuclear and Food & Beverage sectors, delivering practical engineering solutions on essential infrastructure projects. What you'll need Experience delivering PLC and SCADA based control systems Strong PLC and HMI development skills across at least two platforms (Rockwell, Siemens, Mitsubishi or Schneider) Hands-on experience with SCADA systems Knowledge of EtherNet/IP, PROFINET, PROFIBUS DP/PA and Modbus TCP/IP Experience working with Variable Speed Drives Good understanding of electrical safety and safe working practices A proactive approach to health and safety We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
May 14, 2026
Full time
Control Systems Engineer Stafford / Hybrid Working Are you a Control Systems Engineer who enjoys hands-on PLC and SCADA development? Do you like working on full lifecycle projects from design through to commissioning? Would you value a role that offers flexibility alongside technically interesting work? What's in it for you? Up to 45,000 basic salary 25 days holiday plus bank holidays 5% pension 2 days working from home Private healthcare Death in Service benefit Overtime available Employee rewards scheme What will you be doing? Deliver complex control system projects from concept through to commissioning Develop PLC, SCADA and HMI software Translate user requirements into efficient and reliable control systems Carry out bench testing of software before deployment Support on-site commissioning and SAT activities Work closely with Project Managers and senior engineers to meet project milestones Liaise with clients to ensure systems are delivered and performing as expected Where you'll be doing it You'll be joining one of the UK's largest multidisciplinary design and build contractors, with over 100 years of industry experience. They support clients across Water, Power & Energy, Pharmaceutical, Nuclear and Food & Beverage sectors, delivering practical engineering solutions on essential infrastructure projects. What you'll need Experience delivering PLC and SCADA based control systems Strong PLC and HMI development skills across at least two platforms (Rockwell, Siemens, Mitsubishi or Schneider) Hands-on experience with SCADA systems Knowledge of EtherNet/IP, PROFINET, PROFIBUS DP/PA and Modbus TCP/IP Experience working with Variable Speed Drives Good understanding of electrical safety and safe working practices A proactive approach to health and safety We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
May 14, 2026
Full time
Automation Engineer Location: Chesterfield Salary: £55,000 £60,000 Industry: Manufacturing The Opportunity A leading manufacturing business in Chesterfield is seeking an experienced Automation Engineer to join their engineering team. This role will play a key part in supporting site operations and leading automation projects across multiple production facilities. This is an excellent opportunity to join a forward-thinking organisation where you will have real influence over automation strategy, equipment performance, and continuous improvement initiatives. The Role As an Automation Engineer, you will provide technical support across electrical, mechanical, and automation disciplines while leading and coordinating automation projects. You will work closely with cross-functional teams to improve efficiency, reliability, and performance across the site. The role will involve supporting both the Chesterfield and Bradford production sites. Key Responsibilities Provide daily technical support across electrical, mechanical, and automation systems Program and configure PLCs and HMI systems using Siemens (TIA Portal, Simatic Manager, WinCC) and Allen Bradley platforms Lead automation projects including planning, coordination, and delivery Develop and maintain control systems, including PLC, HMI, and robotics solutions Design and produce electrical schematics, control panel drawings, and P&IDs using AutoCAD Support installation, commissioning, and start-up of new equipment Diagnose and resolve automation and control system faults using structured troubleshooting methods Work with fieldbus systems including Profinet, Profibus, ASI Bus, and CAN Bus Program and debug automated machinery and conveyor systems Conduct system testing and validation of new or modified equipment Collaborate with operations, engineering, and external suppliers to resolve issues and implement improvements Identify and deliver continuous improvement initiatives to enhance safety, quality, and efficiency Maintain and document software updates, backups, and system changes Support training and development of apprentices and engineering teams Assist with risk assessments and ensure compliance with safety and statutory requirements About You Proven experience in an Automation Engineer or similar role within manufacturing Strong PLC programming experience with Siemens and/or Allen Bradley systems Experience with HMI/SCADA systems and industrial communication protocols Knowledge of drive systems and servo technology (SEW experience advantageous) Experience using AutoCAD or similar for electrical design and documentation Strong fault-finding and problem-solving skills across automation systems Experience managing or coordinating engineering projects Ability to work cross-functionally and communicate effectively at all levels Proactive approach with a focus on continuous improvement and innovation What s on Offer Salary of £55,000 £60,000 Opportunity to work on a wide range of automation projects across multiple sites A technically challenging and varied role within a leading manufacturing business Long-term development and progression opportunities Collaborative and forward-thinking engineering environment This is a fantastic opportunity for an Automation Engineer looking to take ownership of projects and play a key role in driving automation excellence across a growing manufacturing operation.
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
DCS Recruitment currently seek an experienced Site Manager in the South West (Bristol - Exeter) on behalf of a leading offsite construction specialist. Vacancies: 1 Salary : 42,500 and A company Car will be provided for the role with a full expense package Location: South West region (Bristol - Exeter) This role would suit someone with a knowledge of Modular Construction, bathroom installation, plumbing and electrical work, with commercial awareness. Main Role Objectives Duties include: Visiting all sites prior to and following the first delivery of the pods, to assist the logistics team and ensure safe lifting methods are followed. Carry out joint inspections producing detailed snag reports, non-conformance reports and completing handover documentation. Always demonstrate and encourage safe working practices. Ensure projects are completed on time and to the allocated budget. You must have full understanding of the Offsite Solution quality standard; you will be expected to have a full understanding of how to inspect GRP and Tiled Pods. Producing project specific risk assessments and method statements. Attend site meetings. In line with delivery and completion schedules, organise and manage labour resource to complete defects and snagging. Produce accurate material requisition orders. Have a commercial understanding and awareness of contract terms. Attend handovers from the production team to the site team, to gain all the correct information for project specific requirements. Provide weekly site project reports. Liaise with Management. Design, Quality and Production teams to achieve continuous client satisfaction. Manage Site Supervisors, leading by example to encourage teamwork, positive attitude, good discipline morale and good attendance. Manage periodic Van and equipment inspections. Essential Skills An excellent working knowledge of bathroom installation, plumbing, testing (domestics and drainage), Tiling and electrics. Ability to read and understand technical drawings and general arrangement drawings. First aid (desirable). A good working knowledge of Microsoft office. A good working knowledge of snagging software (Plan Radar, Fieldview, Snag R etc). A good level of written English language with the ability to write accurate emails. Education NVQ Level 3 or above - Site Supervision/Management CITB SMSTS. General Communicate and co-operate with colleagues, supervisors, management and clients across all operational centres. This is primarily in the English language. Undertake any other tasks that are deemed to be reasonable requests from your manager. The Company reserves the right to amend or change the above responsibilities to enable business priorities/needs to be met. This will be conducted in accordance with the change management process. Must be self-motivated, organised and work well with deadlines. An understanding of modular construction would be advantageous. You will be asked to provide two relevant work references and right to work ID prior to start. Call Jack on (phone number removed) (option 2) or apply online to receive a call back. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
May 14, 2026
Full time
DCS Recruitment currently seek an experienced Site Manager in the South West (Bristol - Exeter) on behalf of a leading offsite construction specialist. Vacancies: 1 Salary : 42,500 and A company Car will be provided for the role with a full expense package Location: South West region (Bristol - Exeter) This role would suit someone with a knowledge of Modular Construction, bathroom installation, plumbing and electrical work, with commercial awareness. Main Role Objectives Duties include: Visiting all sites prior to and following the first delivery of the pods, to assist the logistics team and ensure safe lifting methods are followed. Carry out joint inspections producing detailed snag reports, non-conformance reports and completing handover documentation. Always demonstrate and encourage safe working practices. Ensure projects are completed on time and to the allocated budget. You must have full understanding of the Offsite Solution quality standard; you will be expected to have a full understanding of how to inspect GRP and Tiled Pods. Producing project specific risk assessments and method statements. Attend site meetings. In line with delivery and completion schedules, organise and manage labour resource to complete defects and snagging. Produce accurate material requisition orders. Have a commercial understanding and awareness of contract terms. Attend handovers from the production team to the site team, to gain all the correct information for project specific requirements. Provide weekly site project reports. Liaise with Management. Design, Quality and Production teams to achieve continuous client satisfaction. Manage Site Supervisors, leading by example to encourage teamwork, positive attitude, good discipline morale and good attendance. Manage periodic Van and equipment inspections. Essential Skills An excellent working knowledge of bathroom installation, plumbing, testing (domestics and drainage), Tiling and electrics. Ability to read and understand technical drawings and general arrangement drawings. First aid (desirable). A good working knowledge of Microsoft office. A good working knowledge of snagging software (Plan Radar, Fieldview, Snag R etc). A good level of written English language with the ability to write accurate emails. Education NVQ Level 3 or above - Site Supervision/Management CITB SMSTS. General Communicate and co-operate with colleagues, supervisors, management and clients across all operational centres. This is primarily in the English language. Undertake any other tasks that are deemed to be reasonable requests from your manager. The Company reserves the right to amend or change the above responsibilities to enable business priorities/needs to be met. This will be conducted in accordance with the change management process. Must be self-motivated, organised and work well with deadlines. An understanding of modular construction would be advantageous. You will be asked to provide two relevant work references and right to work ID prior to start. Call Jack on (phone number removed) (option 2) or apply online to receive a call back. DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
May 14, 2026
Full time
Job Title: Nuclear Commissioning Project Leader - Electrical (Reactor) Location: Barrow-In-Furness, onsite Salary: Negotiable depending on experience You're expected to have completed 12 months in role prior to applying for an advertised vacancy and you should also discuss the internal opportunity with your line manager to ensure sustained business continuity and to further support your career development. We know there may be exceptional individual circumstances that impact this, in the first instance please discuss this with your line manager . If you don't feel you can talk to your line manager , you can contact your HRBP. PLEASE NOTE: Should you be invited for interview; you acknowledge that the Recruitment team will contact you and your line manager regarding your application for this opportunity. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering advanced, technology-led defence, aerospace and security solutions, shaping a safer future for all of us. From the depths of the ocean to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you will be doing: In this role, you will lead the planning and delivery of electrical commissioning activities across a defined test section, ensuring alignment with wider Test & Commissioning (T&C) programme objectives . You will take ownership of commissioning strategy execution, driving performance against time, cost, and quality targets. You will support and lead a team of commissioning engineers, providing technical direction, oversight, and coaching within a complex nuclear environment. Working closely with the Reactor Test Group (RTG), you will authorise test documentation and ensure all commissioning activities are conducted safely and in compliance with regulatory and company standards. Core duties: Drive the delivery of test and commissioning plans in line with programme milestones Lead and support a team of nuclear electrical commissioning engineers Support the Reactor Test Group (RTG), including authorisation of test documentation Act as Authorised Person within the Permit to Work system Review and approve engineering outputs and technical documentation Plan and manage commissioning programmes across complex systems Embed Learning from Experience (LFE) to improve safety, quality, and delivery Coordinate with stakeholders to ensure safe and compliant execution of commissioning activities Essential Skills: Degree, HNC/HND in an engineering discipline or equivalent experience Strong understanding of nuclear systems and associated testing and commissioning activities Knowledge of submarine systems and their operation Experience working within nuclear, COMAH, or similarly highly regulated environments Proven ability to plan and deliver test and commissioning programmes Experience leading , mentoring, and developing teams in complex engineering environments Familiarity with Learning from Experience (LFE) principles and continuous improvement practices The RTS Commissioning Team: Working within the Reactor Test Section (RTS) Commissioning Team, you will lead the planning and delivery of commissioning activities across major engineering systems and platform assemblies. You will manage a large and diverse team of commissioning engineers, bringing together a wide range of technical skills to deliver a complex and unique project of national importance. This role provides the opportunity to influence commissioning strategy, drive continuous improvement, and contribute to the successful delivery of critical submarine systems. Relocation support packages are available across all Submarines roles, subject to eligibility criteria. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We welcome applications from all suitably qualified people and encourage discussion of reasonable adjustments where needed. Please be aware that many roles at BAE Systems are subject to security and export control restrictions. Applicants must meet Baseline Personnel Security Standard, and many roles require higher levels of National Security Vetting, including 5-10 years continuous UK residency depending on the role . Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. Lifelong learning, meaningful work, and a supportive culture enable you to grow with confidence . You'll be recognised for your contribution and supported with rewards that matter most to you. Closing Date: 20th May 2026 We reserve the right to close this vacancy early if we receive sufficient applications. If you are interested, please apply as early as possible.
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Engineering Team Leader Food Manufacturing Shifts: Week 1 = Sunday - Tuesday Week 2 = Sunday - Wednesday Role: To carry out planned preventative, predictive and breakdown maintenance, repairs, refurbishment, installation, improvement and modification or upgrade of plant, food production, high-speed packaging and site services and, facilities maintenance Drive continuous improvements & process improvement work Carry out project work electrical installation & modificationElectrical fault finding & modifications of PLC s, HMi s, SCADA Systems and Control Panels Mechanical repair and fault finding and routine plant preventative maintenance To work with the Engineering Manager to drive a positive team culture Requirements: Must have a minimum NVQ Level 3 Engineering Qualified to City & Guilds / ONC / HNC in Engineering is desirable Both strong electrical & mechanical fault finding and repair skills, 18th edition preferable Must have worked in fast-paced environment Ideally manufacturing We act as an Employment Agency/Business with regards to this vacancy. As an Equal Opportunities employer we welcome applications regardless of race, gender, nationality, ethnic origin, sexual orientation, religion, marital status, disability or age. All applicants are considered on the basis of their merits and abilities for the job.
May 14, 2026
Full time
Engineering Team Leader Food Manufacturing Shifts: Week 1 = Sunday - Tuesday Week 2 = Sunday - Wednesday Role: To carry out planned preventative, predictive and breakdown maintenance, repairs, refurbishment, installation, improvement and modification or upgrade of plant, food production, high-speed packaging and site services and, facilities maintenance Drive continuous improvements & process improvement work Carry out project work electrical installation & modificationElectrical fault finding & modifications of PLC s, HMi s, SCADA Systems and Control Panels Mechanical repair and fault finding and routine plant preventative maintenance To work with the Engineering Manager to drive a positive team culture Requirements: Must have a minimum NVQ Level 3 Engineering Qualified to City & Guilds / ONC / HNC in Engineering is desirable Both strong electrical & mechanical fault finding and repair skills, 18th edition preferable Must have worked in fast-paced environment Ideally manufacturing We act as an Employment Agency/Business with regards to this vacancy. As an Equal Opportunities employer we welcome applications regardless of race, gender, nationality, ethnic origin, sexual orientation, religion, marital status, disability or age. All applicants are considered on the basis of their merits and abilities for the job.
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
May 14, 2026
Contractor
Senior HV Cable System Design Engineer Location: Epsom, Birmingham, Leeds or Glasgow (Flexible / UK-wide working) Rate: 60 per hour (Umbrella) Contract: Minimum 12 months Start: ASAP IR35: Inside IR35 We are recruiting for an experienced Senior HV Cable System Design Engineer to join a leading engineering organisation delivering major transmission and infrastructure projects across the UK. Working within a multidisciplinary team, you will play a key role in supporting both technical delivery and business growth activities. Key Responsibilities: Lead and support onshore and offshore HV Cable FEED and detailed design activities. Support business development, client engagement and bid/proposal preparation. Coordinate with multidisciplinary teams, suppliers and project stakeholders. Carry out site visits where required. Mentor and support junior engineers. Requirements: Degree in Electrical Engineering or equivalent. Strong experience in HV cable system design, manufacture, testing and installation . Familiarity with major UK utility specifications. Experience on transmission/EHV projects . Strong communication and client-facing skills. Commissioning experience desirable. We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on (phone number removed) or email your CV and covering letter to . Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
