Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
Apr 18, 2026
Seasonal
Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Apr 17, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
Apr 17, 2026
Seasonal
Location: Southampton Pay Rate: Approx. £15.00 - £17.00 per hour , depending on experience Job Type: Long-term temporary, ongoing (with potential to become permanent ) Hours: Full-Time Overview We are recruiting on behalf of a well-established engineering and manufacturing organisation seeking an Electromechanical Assembly Technician to support an increased workload. This is a long-term temporary, ongoing requirement with a strong possibility of a permanent role for the right candidate. The position sits within a medium-volume, low-mix manufacturing environment and involves hands-on assembly, testing, troubleshooting, and repair of complex electromechanical assemblies. You will also work closely with production engineering to support continuous improvement initiatives and manufacturing efficiency. Key Responsibilities Assembly, disassembly, testing, troubleshooting, and repair of electromechanical assemblies Performing highly technical electronic assembly, test, and repair tasks Troubleshooting electronic assemblies under engineering supervision using bench equipment (e.g. multimeters, oscilloscopes) Hand soldering of discrete surface-mount components Working from blueprints, schematics, drawings, manuals, samples, and general instructions Manufacturing products that meet customer and internal quality standards Minimising waste and scrap in line with continuous improvement objectives Identifying faults in electronic and control equipment and supporting corrective actions Disassembling equipment and replacing defective or failed components Maintaining high standards of safety, cleanliness, and organisation in the workplace Providing technical guidance to junior technicians where required and checking quality of work Skills & Abilities Clear verbal and written communication skills Ability to read and understand electrical schematics, blueprints, and specifications Confident troubleshooting electronic assemblies and circuit boards Strong problem-solving ability with excellent attention to detail Well organised, reliable, and able to complete tasks on time Able to work both independently and as part of a team Strong awareness of quality and safety regulations Must be legally authorised to work in the United Kingdom Education & Experience A-Levels or equivalent Minimum of three years' experience in a manufacturing environment involving assembly and troubleshooting of electronic or electromechanical systems Experience working in a medium-volume, low-mix production environment is highly desirable Physical Requirements Ability to stand for extended periods and undertake bench-based assembly work Ability to lift up to 25 lbs (approx. 11 kg) Good manual dexterity for installing and modifying equipment Ability to distinguish wire and cable colours and recognise audible tones Additional Information This job description outlines the main responsibilities of the role but is not exhaustive. Duties may vary depending on business requirements. Application Process Shortlisted candidates may be asked to complete a practical skills assessment as part of the interview process. Apply now for immediate consideration.
This is a hands-on role suited to someone with strong mechanical and electrical assembly experience who enjoys working on technically advanced systems. What You'll Be Doing Building complex electro-mechanical systems from engineering drawings, schematics, and work instructions Mechanical assembly, wiring, and integration of components such as: PCBs Power supplies Cooling systems Server-based hardware Carrying out fault finding, repair, and rework on assemblies Interpreting electrical schematics and resolving issues Ensuring high-quality builds through self-checking and peer checks Supporting production targets and throughput Assisting with prototype builds and project work alongside engineering teams Contributing to Lean Manufacturing, 5S, and continuous improvement initiatives Maintaining a safe, organised, and efficient work environment What We're Looking For Experience assembling complex electro-mechanical products Ability to read and work from engineering drawings and wiring diagrams Strong fault-finding and problem-solving skills Confident working independently and as part of a team Good mechanical skills and general workshop experience A solid understanding of electrical and mechanical principles Familiarity with Lean, 5S, or continuous improvement (desirable) Good attention to detail and ability to work to high-quality standards Working Hours Monday - Thursday: 08:00 - 16:00 Friday: 08:00 - 15:30 Potential to move into a shift-based role in future (with additional pay) Why Apply? Work on cutting-edge, high-spec engineering systems Be part of a skilled and collaborative manufacturing team Opportunity to get involved in prototype and development builds Long-term progression within a growing, technology-driven environment Qualifications: Experience of assembling complex electro-mechanical products Ability to work quickly and accurately with minimal supervision. Adaptability combined with good communication skills Ability to work on own initiative following company procedures Ability to perform basic testing and problem solving Ability to work accurately to procedures to produce work of consistent high quality Able to integrate well into an established team supporting and assisting colleagues when required GCSE level maths and English Good mechanical and workshop skills A good general technical and electro-mechanical mind-set -e.g. understanding of electrical and mechanical documentation, drawings and specifications Understanding of electrical and mechanical safety standards. Experience of Lean Manufacturing, 5S, BPD and Continuous Improvement. Initially Monday to Thursday 08:00-16:00 Friday 08:00-15:30 but may develop into a shift role in the future should the business require it. This would attract a shift premium.
Apr 16, 2026
Full time
This is a hands-on role suited to someone with strong mechanical and electrical assembly experience who enjoys working on technically advanced systems. What You'll Be Doing Building complex electro-mechanical systems from engineering drawings, schematics, and work instructions Mechanical assembly, wiring, and integration of components such as: PCBs Power supplies Cooling systems Server-based hardware Carrying out fault finding, repair, and rework on assemblies Interpreting electrical schematics and resolving issues Ensuring high-quality builds through self-checking and peer checks Supporting production targets and throughput Assisting with prototype builds and project work alongside engineering teams Contributing to Lean Manufacturing, 5S, and continuous improvement initiatives Maintaining a safe, organised, and efficient work environment What We're Looking For Experience assembling complex electro-mechanical products Ability to read and work from engineering drawings and wiring diagrams Strong fault-finding and problem-solving skills Confident working independently and as part of a team Good mechanical skills and general workshop experience A solid understanding of electrical and mechanical principles Familiarity with Lean, 5S, or continuous improvement (desirable) Good attention to detail and ability to work to high-quality standards Working Hours Monday - Thursday: 08:00 - 16:00 Friday: 08:00 - 15:30 Potential to move into a shift-based role in future (with additional pay) Why Apply? Work on cutting-edge, high-spec engineering systems Be part of a skilled and collaborative manufacturing team Opportunity to get involved in prototype and development builds Long-term progression within a growing, technology-driven environment Qualifications: Experience of assembling complex electro-mechanical products Ability to work quickly and accurately with minimal supervision. Adaptability combined with good communication skills Ability to work on own initiative following company procedures Ability to perform basic testing and problem solving Ability to work accurately to procedures to produce work of consistent high quality Able to integrate well into an established team supporting and assisting colleagues when required GCSE level maths and English Good mechanical and workshop skills A good general technical and electro-mechanical mind-set -e.g. understanding of electrical and mechanical documentation, drawings and specifications Understanding of electrical and mechanical safety standards. Experience of Lean Manufacturing, 5S, BPD and Continuous Improvement. Initially Monday to Thursday 08:00-16:00 Friday 08:00-15:30 but may develop into a shift role in the future should the business require it. This would attract a shift premium.
Assembler Location: Cheadle (Stockport) Type of role: Permanent Salary: £29,125/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose The ideal candidate for above role will be a confident and highly organized self-starter with some applications knowledge, communication and technical problem-solving skills to ensure execution of our quality standards and customer on time delivery metrics. Key Responsibilities Able to read, understand, and adhere to work instructions, BOMs, and assembly drawings Usage of hand tools properly and safely Mechanical assembly of product within acceptable quality and output levels Soldering of cables, wires and through hole devices within acceptable quality limits Inspect product and properly identify non-conformances Properly operate pass/fail test equipment (ALTF, PD Test, etc.) Cleanliness and workstation clean up through 5S standards Strict compliance with the quality, occupational safety, and environmental regulations. Implementation of the instructions of the quality / environmental management representative and the occupational safety specialist What you bring: Team player with strong computer, written, verbal and skills Previous experience with opto-electronics and PCB commodities, Working experience in Lean Manufacturing and Six Sigma environments Familiar and knowledgeable with QMS standards (ie: ISO 9001) Basic knowledge and practice of ESD and 5S principles Safety and chemical awareness Preferred - IPC solder requirements verified (Consistently meet IPC requirements tested per IPC610 requirements) Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Apr 16, 2026
Full time
Assembler Location: Cheadle (Stockport) Type of role: Permanent Salary: £29,125/annum Shift pattern: Monday Friday (DAYS) 37hrs/week About Company Our client brings advanced technology to life. As a global leader in mission-critical technologies for medical and advanced industrial OEMs, they are driven by innovation, precision, and purpose. Join a team where your expertise powers breakthroughs that matter. Job Purpose The ideal candidate for above role will be a confident and highly organized self-starter with some applications knowledge, communication and technical problem-solving skills to ensure execution of our quality standards and customer on time delivery metrics. Key Responsibilities Able to read, understand, and adhere to work instructions, BOMs, and assembly drawings Usage of hand tools properly and safely Mechanical assembly of product within acceptable quality and output levels Soldering of cables, wires and through hole devices within acceptable quality limits Inspect product and properly identify non-conformances Properly operate pass/fail test equipment (ALTF, PD Test, etc.) Cleanliness and workstation clean up through 5S standards Strict compliance with the quality, occupational safety, and environmental regulations. Implementation of the instructions of the quality / environmental management representative and the occupational safety specialist What you bring: Team player with strong computer, written, verbal and skills Previous experience with opto-electronics and PCB commodities, Working experience in Lean Manufacturing and Six Sigma environments Familiar and knowledgeable with QMS standards (ie: ISO 9001) Basic knowledge and practice of ESD and 5S principles Safety and chemical awareness Preferred - IPC solder requirements verified (Consistently meet IPC requirements tested per IPC610 requirements) Why join our client: Work on cutting-edge technologies that make a real-world impact. Be part of a collaborative, forward-thinking team. Competitive salary and benefits package. Opportunities for professional growth and global collaboration. If you think that you are suitable for the role, please do not hesitate to apply. LMIND
Our client, based in Yarnton, is the world leader in motion capture technology, developing high-performance software and hardware products for the entertainment, engineering and life science industries. Due to continued growth, they are now looking for an experienced Lead Production Technician to join their team. Reporting directly to the Production Manager, the Lead Production Technician within the Production Department leads the production build process by performing assembly, testing, kitting, and diagnosing mechanical faults in electromechanical products, while coordinating the build crew and managing the progression of manufacturing orders. Please note this role is fully on-site, so candidates must be able to commute to Yarnton. Main Duties & Responsibilities: Supervising a team of Electro-Mechanical Assemblers, assigning and delegating tasks, and ensuring the team meets its goals Liaising with the Planner to convert the build plan to Manufacturing Orders Actively participating in the following disciplines, balancing hands-on work with supervisory duties to ensure deadlines are met: Assemble electro-mechanical assemblies with reference to assembly drawings, assembly instructions, and bills of materials. Performing with the Programming, set-up and testing of built units (including any necessary optical alignment cameras) Diagnosing mechanical faults in camera sub-assemblies to component level and managing the repair/replacement Kitting/Supervising the kitting of Manufacturing Orders to the shop floor (including transacting stock via NetSuite) Liaising with the test engineers with reference to the progression of Manufacturing Orders through to completion Assisting the Stock Controller (including assisting with stock take and stock organisation/location) Liaising with the Production Manager/Planner and test engineers, reference RMAs and the progression of RMA returns through repair or to stock Assist with the ongoing improvement of the current product by actively feeding back observations from the current build Assist in the risk prevention/design improvement process by actively feeding back observations from the prototype/current build. To participate in training activities for flexible working To work using correct documentation To participate in Quality Control, Waste Minimisation or other improvement activities Previous Experience/Qualifications: To have experience in the leadership of teams of people To have experience in the use of ERP Systems (i.e. NS) Self-motivated and able to work on own initiative. Meticulous with a good eye for detail. Organised and tidy. Exhibit good written and verbal communication and problem-solving skills. Additional Information: Please note this is a full-time, permanent role working Monday to Friday, on-site 10% Company Pension 25 days Annual Leave + Bank Holidays Life Cover Private Medical with Optical / Dental Insurance Permanent Health Insurance
Apr 16, 2026
Full time
Our client, based in Yarnton, is the world leader in motion capture technology, developing high-performance software and hardware products for the entertainment, engineering and life science industries. Due to continued growth, they are now looking for an experienced Lead Production Technician to join their team. Reporting directly to the Production Manager, the Lead Production Technician within the Production Department leads the production build process by performing assembly, testing, kitting, and diagnosing mechanical faults in electromechanical products, while coordinating the build crew and managing the progression of manufacturing orders. Please note this role is fully on-site, so candidates must be able to commute to Yarnton. Main Duties & Responsibilities: Supervising a team of Electro-Mechanical Assemblers, assigning and delegating tasks, and ensuring the team meets its goals Liaising with the Planner to convert the build plan to Manufacturing Orders Actively participating in the following disciplines, balancing hands-on work with supervisory duties to ensure deadlines are met: Assemble electro-mechanical assemblies with reference to assembly drawings, assembly instructions, and bills of materials. Performing with the Programming, set-up and testing of built units (including any necessary optical alignment cameras) Diagnosing mechanical faults in camera sub-assemblies to component level and managing the repair/replacement Kitting/Supervising the kitting of Manufacturing Orders to the shop floor (including transacting stock via NetSuite) Liaising with the test engineers with reference to the progression of Manufacturing Orders through to completion Assisting the Stock Controller (including assisting with stock take and stock organisation/location) Liaising with the Production Manager/Planner and test engineers, reference RMAs and the progression of RMA returns through repair or to stock Assist with the ongoing improvement of the current product by actively feeding back observations from the current build Assist in the risk prevention/design improvement process by actively feeding back observations from the prototype/current build. To participate in training activities for flexible working To work using correct documentation To participate in Quality Control, Waste Minimisation or other improvement activities Previous Experience/Qualifications: To have experience in the leadership of teams of people To have experience in the use of ERP Systems (i.e. NS) Self-motivated and able to work on own initiative. Meticulous with a good eye for detail. Organised and tidy. Exhibit good written and verbal communication and problem-solving skills. Additional Information: Please note this is a full-time, permanent role working Monday to Friday, on-site 10% Company Pension 25 days Annual Leave + Bank Holidays Life Cover Private Medical with Optical / Dental Insurance Permanent Health Insurance
Important: Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC) Benefits: Full company benefits, flexible working and some remote working potentials. - We are looking a Hardware Engineer who can operate in a fast-paced environment as part of a multi-disciplined team across all aspects of standard and bespoke secure digital design solutions to join one of our major defence clients. As a Hardware Engineer on the team, you will be involved in all aspects of a challenging and rewarding engineering role covering design, test, production support and customer unit evaluation and commissioning. - Key Responsibilities: Ownership of the design and delivery of hardware throughout the development lifecycle Specification and design of high-speed digital boards for products and test equipment Design, build and test of development and production test equipment Schematic capture and support of PCB layout Co-ordinate design with Mechanical, Software and System engineers Hardware design proving testing Support to software and system testing Production of development and production test processes and procedures. Support to manufacturing, resolving test and production issues, training production staff Resolution of design, obsolescence and production issues on existing products Integration of Data At Rest products into customer platforms In addition, from time to time, you may be asked to undertake other tasks and responsibilities not covered above in order to achieve project or business objectives. Experience needed: Full development life-cycle experience Excellent understanding of electronic design fundamentals, high speed digital design and signal integrity Proven track record of digital circuit development Adept with hardware testing and troubleshooting using oscilloscopes, logic analysers, power supplies and multi-meters. Proficient with industry standard CAD toolsets (e.g. Cadence or Mentor Schematic & Layout Tools) Degree in Electronic Engineering or similar discipline Must be a UK national and have or, be capable of obtaining, UK security clearance Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience supporting production Design for Test (DFT) and Design for Manufacture (DFM) methodologies and techniques Embedded firmware design (C/C++/assembler/Python). Software design for test and test equipment development Writing test specifications and carrying out HW and system testing - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Details: Join a Global communications company, where the innovations have helped shape how consumers, businesses, governments, and militaries around the world communicate! - even in the hardest-to-reach places! The company are growing rapidly and looking for passionate, innovative professionals to join the team. You'll work in a collaborative and inclusive environment that values diverse perspectives and continuous learning. Technology Innovators Awards Gold Honoree 2021 Glassdoor's 2022 Best Places to Work for U.S. Large Employers List! - For full information, please get in touch
Apr 16, 2026
Full time
Important: Must have sole British Nationality (due to UK eyes-only projects), and have, or be capable of obtaining, UK security clearance (SC) Benefits: Full company benefits, flexible working and some remote working potentials. - We are looking a Hardware Engineer who can operate in a fast-paced environment as part of a multi-disciplined team across all aspects of standard and bespoke secure digital design solutions to join one of our major defence clients. As a Hardware Engineer on the team, you will be involved in all aspects of a challenging and rewarding engineering role covering design, test, production support and customer unit evaluation and commissioning. - Key Responsibilities: Ownership of the design and delivery of hardware throughout the development lifecycle Specification and design of high-speed digital boards for products and test equipment Design, build and test of development and production test equipment Schematic capture and support of PCB layout Co-ordinate design with Mechanical, Software and System engineers Hardware design proving testing Support to software and system testing Production of development and production test processes and procedures. Support to manufacturing, resolving test and production issues, training production staff Resolution of design, obsolescence and production issues on existing products Integration of Data At Rest products into customer platforms In addition, from time to time, you may be asked to undertake other tasks and responsibilities not covered above in order to achieve project or business objectives. Experience needed: Full development life-cycle experience Excellent understanding of electronic design fundamentals, high speed digital design and signal integrity Proven track record of digital circuit development Adept with hardware testing and troubleshooting using oscilloscopes, logic analysers, power supplies and multi-meters. Proficient with industry standard CAD toolsets (e.g. Cadence or Mentor Schematic & Layout Tools) Degree in Electronic Engineering or similar discipline Must be a UK national and have or, be capable of obtaining, UK security clearance Desirable: Experience in the Defence / Aerospace or safety regulated environment would be advantageous Experience supporting production Design for Test (DFT) and Design for Manufacture (DFM) methodologies and techniques Embedded firmware design (C/C++/assembler/Python). Software design for test and test equipment development Writing test specifications and carrying out HW and system testing - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Details: Join a Global communications company, where the innovations have helped shape how consumers, businesses, governments, and militaries around the world communicate! - even in the hardest-to-reach places! The company are growing rapidly and looking for passionate, innovative professionals to join the team. You'll work in a collaborative and inclusive environment that values diverse perspectives and continuous learning. Technology Innovators Awards Gold Honoree 2021 Glassdoor's 2022 Best Places to Work for U.S. Large Employers List! - For full information, please get in touch
Now Hiring: Electromechanical Assembler Job Title: Electromechanical Assembler Location: St Ives Salary: £12.71ph Contract Type: Temporary to Permanent Shift Pattern: Days About the role: We are seeking a skilled and detail-oriented Electromechanical Assembler to join our clients team click apply for full job details
Apr 13, 2026
Seasonal
Now Hiring: Electromechanical Assembler Job Title: Electromechanical Assembler Location: St Ives Salary: £12.71ph Contract Type: Temporary to Permanent Shift Pattern: Days About the role: We are seeking a skilled and detail-oriented Electromechanical Assembler to join our clients team click apply for full job details
Subject - Electronic Assembler - Cutting-Edge Technology - Paignton Job Title: Assembler Location: Paignton Salary: Competitive Benefits: 25 days annual leave (increasing to 30 with length of service), 4 x life insurance, employer pension contributions starting from 6% up to 14%, single private medical insurance and Medicash plan. The Client: We are working in partnership with a well-established engineering organisation operating within the communications and positioning technology space. They develop advanced electronic systems used in high-performance environments and offer a structured, quality-driven manufacturing setting with a strong focus on continuous improvement. The Candidate: This role would suit someone with hands-on experience in electronics or electrical assembly who enjoys working in a practical, production-based environment. You will be comfortable working with wiring, components, and tools, and take pride in producing high-quality work. You will be detail-oriented, reliable, and able to follow processes and documentation accurately. The Role: As an Assembler, you will be responsible for the assembly, integration, and testing of electronic systems and components. You will support production builds, rework, and repair activities, ensuring products meet required quality and performance standards within a structured manufacturing environment. Key Duties: Assembly of cable assemblies including wiring and semi-rigid cables. Assembly and integration of electronic systems and test racks. Production builds of standard and configured units. Rework, repair, and basic fault finding. Functional testing in line with documented procedures. Completion of production documentation and records. Identification and escalation of quality or process issues. Contribution to continuous improvement and 5S activities. Requirements: Experience in electronics or electrical assembly within a manufacturing environment. Hands-on soldering and mechanical assembly skills. Ability to read wiring diagrams, assembly drawings, and BOMs. Experience working to structured processes and production targets. Strong attention to detail and quality focus. Competent with hand tools and basic test equipment. Reliable, team-oriented, and able to work under pressure. Nice to Have: (Not Essential) Experience working with RF assemblies or signal-based equipment. Previous experience building test racks or complex systems. Familiarity with high-tech or regulated manufacturing environments. Exposure to continuous improvement or 5S practices. To apply for this Electronic Assembler permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Apr 13, 2026
Full time
Subject - Electronic Assembler - Cutting-Edge Technology - Paignton Job Title: Assembler Location: Paignton Salary: Competitive Benefits: 25 days annual leave (increasing to 30 with length of service), 4 x life insurance, employer pension contributions starting from 6% up to 14%, single private medical insurance and Medicash plan. The Client: We are working in partnership with a well-established engineering organisation operating within the communications and positioning technology space. They develop advanced electronic systems used in high-performance environments and offer a structured, quality-driven manufacturing setting with a strong focus on continuous improvement. The Candidate: This role would suit someone with hands-on experience in electronics or electrical assembly who enjoys working in a practical, production-based environment. You will be comfortable working with wiring, components, and tools, and take pride in producing high-quality work. You will be detail-oriented, reliable, and able to follow processes and documentation accurately. The Role: As an Assembler, you will be responsible for the assembly, integration, and testing of electronic systems and components. You will support production builds, rework, and repair activities, ensuring products meet required quality and performance standards within a structured manufacturing environment. Key Duties: Assembly of cable assemblies including wiring and semi-rigid cables. Assembly and integration of electronic systems and test racks. Production builds of standard and configured units. Rework, repair, and basic fault finding. Functional testing in line with documented procedures. Completion of production documentation and records. Identification and escalation of quality or process issues. Contribution to continuous improvement and 5S activities. Requirements: Experience in electronics or electrical assembly within a manufacturing environment. Hands-on soldering and mechanical assembly skills. Ability to read wiring diagrams, assembly drawings, and BOMs. Experience working to structured processes and production targets. Strong attention to detail and quality focus. Competent with hand tools and basic test equipment. Reliable, team-oriented, and able to work under pressure. Nice to Have: (Not Essential) Experience working with RF assemblies or signal-based equipment. Previous experience building test racks or complex systems. Familiarity with high-tech or regulated manufacturing environments. Exposure to continuous improvement or 5S practices. To apply for this Electronic Assembler permanent job, please click the button below and submit your latest CV. Curo Services endeavours to respond to all applications, however this may not always be possible during periods of high volume. Thank you for your patience. Curo Services is a trading name of Curo Resourcing Ltd and acts as an Employment Business for contract and temporary recruitment as well as an Employment Agency in relation to permanent vacancies.
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Position: Mechanical Assembler Rate: 13.50ph - 15.00ph Duration: Temp to Perm Location: Enfield Hours: 07:00am - 16:00pm Proactive are currently recruiting for multiple skilled Assemblers in Enfield to start work immediately. You will be working as part of a wider team delivering projects to meet production targets. If you have experience with any of the following skillsets please get in touch to be considered for this exciting opportunity. Relevant Skills & Experience: Ability to perform mechanical assembly and sub assembly. Experience with fitting of parts or components. Experience with electronic or mechanical testing or inspection. Ability to read and interpret engineering drawings. Use of various hand tools. Previous experience working within an assembly / manufacturing position. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Position: Mechanical Assembler Rate: 13.50ph - 15.00ph Duration: Temp to Perm Location: Enfield Hours: 07:00am - 16:00pm Proactive are currently recruiting for multiple skilled Assemblers in Enfield to start work immediately. You will be working as part of a wider team delivering projects to meet production targets. If you have experience with any of the following skillsets please get in touch to be considered for this exciting opportunity. Relevant Skills & Experience: Ability to perform mechanical assembly and sub assembly. Experience with fitting of parts or components. Experience with electronic or mechanical testing or inspection. Ability to read and interpret engineering drawings. Use of various hand tools. Previous experience working within an assembly / manufacturing position. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Jemal Tawfieg on (phone number removed) or (url removed) Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Oct 07, 2025
Full time
Position: Electro Mechanical Assembler Location: Kempston Proactive are currently working with a client who are a market leader in their field based in Kempston. The client are currently in need of a Electro Mechanical Assembler. The need is due to rapid company growth, the successful candidate will be joining a thriving business and be helping maintain the site's function through this exciting influx of work. Your daily duties will include: Read and interpret technical drawings, wiring schematics and follow PIO instructions to ensure correct assembly and wiring. Operate electrical test equipment to ensure systems function correctly and safely. Work with systems in hybrid and electric units, ensuring safe handling and integration. Ensure all work meets quality standards and is completed within production schedules. Report all issues and non-conformance to Team Leader / Supervisor. Operate overhead cranes and other lifting equipment as required. React to business demands to ensure adherence to commitments. Be a positive influence in the team by upholding our core values and quality commitments. To be considered for this role you will need the following skills/experience: Proven experience as an Electro-Mechanical Technician or similar role in a manufacturing environment. Strong ability to read and interpret technical drawings, wiring schematics and using digital manufacturing guides. Hands-on experience with manufacturing and assembly tooling. Familiarity with electrical test equipment and troubleshooting techniques. Ability to work independently and as part of a team to meet production targets. If you are interested in this position, please apply with a copy of your CV & a member of our team will be in touch to discuss the opportunity with you in further detail. How to Apply: For more information on the role, or an informal discussion regarding opportunities we have available, please contact Charley McCleave on (phone number removed) or (url removed) . Why work with Proactive? Proactive Global is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Assembler Location: Didcot Salary: £34,000 £38,000 per annum Hours: Monday to Friday, 9:00am 5:30pm Type: Full-time, Permanent We re looking for experienced Assemblers to help bring these advanced systems to life. You'll be hands-on with the mechanical and electrical assembly of compact, high-performance systems, playing a vital role in the development, testing, and refinement of next-generation technologies. What You ll Be Doing as an Assembler: Assembling mechanical and electrical components Assisting in test setups, instrumentation, and data collection Conducting inspections and troubleshooting Collaborating with engineers on quality and process improvement Maintaining production records, inventory, and purchasing logs Driving improvements in safety, efficiency, and cost What We re Looking For as an Assembler: Essential: Solid experience with mechanical assembly Ability to follow standard operating procedures (SOPs) and quality systems Desirable: Experience in a production/manufacturing environment Background in scaling up assembly systems or manufacturing facilities Familiarity with drafting SOPs and improving manufacturing processes Why Join Us? 25 days holiday bank holidays Enhanced pension scheme Private healthcare, including dental and optical Employee Assistance Programme for personal and professional support Exclusive perks: discounts on shopping, gym memberships, restaurants, and cinemas If you're interested in joining this company as an Assembler , APPLY NOW! For more information, please contact Charlie Penn at Orion Electrotech Reading for a chat.
Oct 03, 2025
Full time
Assembler Location: Didcot Salary: £34,000 £38,000 per annum Hours: Monday to Friday, 9:00am 5:30pm Type: Full-time, Permanent We re looking for experienced Assemblers to help bring these advanced systems to life. You'll be hands-on with the mechanical and electrical assembly of compact, high-performance systems, playing a vital role in the development, testing, and refinement of next-generation technologies. What You ll Be Doing as an Assembler: Assembling mechanical and electrical components Assisting in test setups, instrumentation, and data collection Conducting inspections and troubleshooting Collaborating with engineers on quality and process improvement Maintaining production records, inventory, and purchasing logs Driving improvements in safety, efficiency, and cost What We re Looking For as an Assembler: Essential: Solid experience with mechanical assembly Ability to follow standard operating procedures (SOPs) and quality systems Desirable: Experience in a production/manufacturing environment Background in scaling up assembly systems or manufacturing facilities Familiarity with drafting SOPs and improving manufacturing processes Why Join Us? 25 days holiday bank holidays Enhanced pension scheme Private healthcare, including dental and optical Employee Assistance Programme for personal and professional support Exclusive perks: discounts on shopping, gym memberships, restaurants, and cinemas If you're interested in joining this company as an Assembler , APPLY NOW! For more information, please contact Charlie Penn at Orion Electrotech Reading for a chat.
Job Title: Mechanical Assembler Location: Bedhampton, Hampshire Flexible Opportunities: Fully onsite Pay & benefits: £16.98/hour PAYE (or £19.45/hour incl. holiday pay), 33 days annual leave, overtime paid at 1.5x after 37 hours and 2x on Sundays, with clear progression opportunities. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're seeking a skilled Mechanical Technician to join the Maintenance, Repair & Overhaul (MRO) team of a leading aerospace client. What will I be doing? As an MRO Technician, you'll have the opportunity to work on precision hydro-mechanical components in a fast-paced, high-quality environment. Key Responsibilities: Assemble hydro-mechanical and electro-mechanical products to engineering drawings and specifications Repair and overhaul components using CMMs, Service Bulletins, and approved documentation Configure and operate test equipment to perform unit acceptance testing and diagnose faults Carry out visual and dimensional inspections, document findings, and apply corrective actions Ensure all work meets quality standards and remains within your declared capability Collaborate with team leads to meet production and quality targets What You Need to Succeed: Solid understanding of mechanical assembly and test procedures Ability to interpret assembly drawings and Production Acceptance Test data Working knowledge of hydraulic circuitry for test and troubleshooting Strong problem-solving skills and a proactive, team-focused mindset What's my next step? Ready to bring your skills to the world of aerospace MRO? Apply now and take the next step in your career!
Oct 02, 2025
Full time
Job Title: Mechanical Assembler Location: Bedhampton, Hampshire Flexible Opportunities: Fully onsite Pay & benefits: £16.98/hour PAYE (or £19.45/hour incl. holiday pay), 33 days annual leave, overtime paid at 1.5x after 37 hours and 2x on Sundays, with clear progression opportunities. Due to the nature of the role, you must be eligible to live and work in the UK freely, obtain baseline clearance and adhere to ITAR restrictions. Who We Are & What's on Offer We're seeking a skilled Mechanical Technician to join the Maintenance, Repair & Overhaul (MRO) team of a leading aerospace client. What will I be doing? As an MRO Technician, you'll have the opportunity to work on precision hydro-mechanical components in a fast-paced, high-quality environment. Key Responsibilities: Assemble hydro-mechanical and electro-mechanical products to engineering drawings and specifications Repair and overhaul components using CMMs, Service Bulletins, and approved documentation Configure and operate test equipment to perform unit acceptance testing and diagnose faults Carry out visual and dimensional inspections, document findings, and apply corrective actions Ensure all work meets quality standards and remains within your declared capability Collaborate with team leads to meet production and quality targets What You Need to Succeed: Solid understanding of mechanical assembly and test procedures Ability to interpret assembly drawings and Production Acceptance Test data Working knowledge of hydraulic circuitry for test and troubleshooting Strong problem-solving skills and a proactive, team-focused mindset What's my next step? Ready to bring your skills to the world of aerospace MRO? Apply now and take the next step in your career!
Job Title: Electrical Assembler Job Location: Goole, East Riding of Yorkshire Shifts: Mornings and Afternoons Rotating Mon-Thurs (06:00-14:30, 14:30-22:00). Early finish Fridays (06:00-14:00, 14:30-20:00) Hourly Rate: P.A.Y.E. - 18.86 P/H (Weekend O/T is 21.32 P/H) Hours Per Week: 40 Duration: Ongoing (12 Months Rolling) Start Date: April 2025 Company Summary In partnership with Siemens Mobility we are recruiting for a large team of electrical assemblers to build London's new fleet of underground stock, the Piccadilly line. This is one of the industries most exciting projects to be involved in, helping manufacture London's newest tube fleet. This will involve working out of Siemens Mobility's brand new state-of-the-art facility purpose built for this project! Position Summary: As an electrical assembler, you will be experienced working in a safe manner, adhering to Siemens 4 steps to zero harm. You will be carrying out assembly tasks on electro-mechanical parts, components, assemblies/sub-assemblies. Responsibilities Include: Crimping and termination of electrical looms or similar Connecting Plug Assembly to plan Cable routing to layout plans Documentation of activities (Glass or Paper systems) Working closely to production instructions including all correct tooling Conduct regular quality, sight and functionality tests Person Profile: We are ideally looking for someone with an appropriate level 3 electrical qualification Experience working within a manufacturing, maintenance or overhaul environment Ideally you will be familiar with ERP systems, with a preference of SAP You will be a self starter, with strong organizational skills able to work both independently and in a team environment. Contact Details: Email: (url removed) Phone Number: (phone number removed) (phone number removed) We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us! Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Oct 02, 2025
Contractor
Job Title: Electrical Assembler Job Location: Goole, East Riding of Yorkshire Shifts: Mornings and Afternoons Rotating Mon-Thurs (06:00-14:30, 14:30-22:00). Early finish Fridays (06:00-14:00, 14:30-20:00) Hourly Rate: P.A.Y.E. - 18.86 P/H (Weekend O/T is 21.32 P/H) Hours Per Week: 40 Duration: Ongoing (12 Months Rolling) Start Date: April 2025 Company Summary In partnership with Siemens Mobility we are recruiting for a large team of electrical assemblers to build London's new fleet of underground stock, the Piccadilly line. This is one of the industries most exciting projects to be involved in, helping manufacture London's newest tube fleet. This will involve working out of Siemens Mobility's brand new state-of-the-art facility purpose built for this project! Position Summary: As an electrical assembler, you will be experienced working in a safe manner, adhering to Siemens 4 steps to zero harm. You will be carrying out assembly tasks on electro-mechanical parts, components, assemblies/sub-assemblies. Responsibilities Include: Crimping and termination of electrical looms or similar Connecting Plug Assembly to plan Cable routing to layout plans Documentation of activities (Glass or Paper systems) Working closely to production instructions including all correct tooling Conduct regular quality, sight and functionality tests Person Profile: We are ideally looking for someone with an appropriate level 3 electrical qualification Experience working within a manufacturing, maintenance or overhaul environment Ideally you will be familiar with ERP systems, with a preference of SAP You will be a self starter, with strong organizational skills able to work both independently and in a team environment. Contact Details: Email: (url removed) Phone Number: (phone number removed) (phone number removed) We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us! Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Assembly Job title : Assembler Location: Woking Duration: Rolling 3 month contract Salary: £13.46ph Orion are currently working on behalf of a company who have an opportunity for an Assembler to start their journey and join them on a contract basis. The role of Assembler will include: Electro mechanical assembly, using various hand and power tools Soldering and crimping of wires Reading and following engineering drawings and work instructions The Assembler should have the following skills and experience: Previous assembly experience, ideally Electro Mechanical Soldering experience would be beneficial Able to follow instructions If you're interested in joining this company as an Assembler, APPLY NOW! For more information, please contact Paige Albery at Orion Electrotech Reading for a chat. Due to the volume of applications we receive, unfortunately we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website.
Oct 02, 2025
Full time
Assembly Job title : Assembler Location: Woking Duration: Rolling 3 month contract Salary: £13.46ph Orion are currently working on behalf of a company who have an opportunity for an Assembler to start their journey and join them on a contract basis. The role of Assembler will include: Electro mechanical assembly, using various hand and power tools Soldering and crimping of wires Reading and following engineering drawings and work instructions The Assembler should have the following skills and experience: Previous assembly experience, ideally Electro Mechanical Soldering experience would be beneficial Able to follow instructions If you're interested in joining this company as an Assembler, APPLY NOW! For more information, please contact Paige Albery at Orion Electrotech Reading for a chat. Due to the volume of applications we receive, unfortunately we are not able to respond to every application personally, therefore, if you have not heard back from us within 5 working days please assume your application has been unsuccessful. To see our other available vacancies please visit our website.
Assembler Assembler Build Your Future with a Leading Manufacturer! Location: Ashford Job Type: Full-Time Salary: Up to £30,000 Electromechanical needed! Mechanical Assemblers needed! Electronics Assemblers needed! Working Hours: Monday to Thursday: 7:30 AM 4:30 PM Friday Finish: 7:30 AM 1:00 PM start your weekend early! About the Assembler Role: Are you a skilled Assembler ready to take the next step in your career? Join a respected and forward-thinking manufacturer in the engineering space. We re looking for a reliable, detail-oriented Assembler to support our growing production team. If you enjoy hands-on work and thrive in a fast-paced environment, this Assembler role could be the perfect fit. ï Key Responsibilities of the Assembler: Assemble components and products using technical drawings and instructions. Perform quality inspections to ensure each build meets our high standards. Use hand tools and equipment with confidence and care. Work collaboratively with other team members to maintain efficient production. Keep your work area clean, safe, and compliant with health & safety practices. Report any faults or issues during the assembly process promptly. Why Join Us as an Assembler? Competitive salary up to £30k ï Pension scheme & life assurance Career development in a growing company Enjoy an early finish every Friday Take the next step in your career as an Assembler bring your talent to a team that values precision, quality, and your contribution. Apply now to become our newest Assembler! INDMAN
Oct 02, 2025
Full time
Assembler Assembler Build Your Future with a Leading Manufacturer! Location: Ashford Job Type: Full-Time Salary: Up to £30,000 Electromechanical needed! Mechanical Assemblers needed! Electronics Assemblers needed! Working Hours: Monday to Thursday: 7:30 AM 4:30 PM Friday Finish: 7:30 AM 1:00 PM start your weekend early! About the Assembler Role: Are you a skilled Assembler ready to take the next step in your career? Join a respected and forward-thinking manufacturer in the engineering space. We re looking for a reliable, detail-oriented Assembler to support our growing production team. If you enjoy hands-on work and thrive in a fast-paced environment, this Assembler role could be the perfect fit. ï Key Responsibilities of the Assembler: Assemble components and products using technical drawings and instructions. Perform quality inspections to ensure each build meets our high standards. Use hand tools and equipment with confidence and care. Work collaboratively with other team members to maintain efficient production. Keep your work area clean, safe, and compliant with health & safety practices. Report any faults or issues during the assembly process promptly. Why Join Us as an Assembler? Competitive salary up to £30k ï Pension scheme & life assurance Career development in a growing company Enjoy an early finish every Friday Take the next step in your career as an Assembler bring your talent to a team that values precision, quality, and your contribution. Apply now to become our newest Assembler! INDMAN
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Oct 02, 2025
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 500 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. As part of the global entity Saab AB, Saab UK combines the innovative spirit of a start-up with the resources and expertise of a larger corporation. Globally, Saab employs over 22,000 people, with operations on every continent. Our partnerships with UK customers and industry mean we are able to deliver innovative solutions to complex challenges, anticipating the threats of tomorrow. We invest 23% of our annual revenue into research and development, collaborating with a range of partners including industry and academia. Saab is a company that offers our employees plenty of opportunities for growth and advancement. We embrace diversity and are committed to providing a workplace where individuals can thrive professionally, paving the way for future progression. We also recognise the need for a healthy work-life balance to ensure our staff have the chance to live a fulfilling life beyond the workplace. The Role: This role sits within our Sensor Systems Business Unit. We are looking for an Electrical Assembler to work on the manufacturing of electronic equipment, through assembly of mechanics and electronics in a small production unit. Your personal skills are important where we have high expectations in cooperation and communication within your team and organization. Main Duties: Electromechanical assembly and soldering. Read and understand technical documents for manufacturing purpose. Handling of documents and non conformancies according to stated processes. Contribute with continuous improvements within quality, delivery and cost. Take part in education and support of new employees. In a clear way be able to communicate status of ongoing work which you are responsible for. Skills and Experience: A social and good team player. 3+ years of relevant experience within electromechanical assembly or production. Manual soldering skills. Excellent communication skills in English, verbal and written. High expectations regarding fine motor skills, endurance and accuracy. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Wiring and Mechanical Assembler - Poole TeamJobs are currently working with a fantastic company, recruiting for additional Wiring and Mechanical Assemblers to join their team on a temporary ongoing basis. Responsibilities Prepare and assemble electronic and mechanical parts Follow technical instructions and drawings Ensure assembled products meet quality standards Use of a variety of hand tools Adhere to health and safety regulations Requirements Ideally you will have experience within a assembly role Ability to read and interpret technical drawings and diagrams Basic computer skills Hours & Pay 37.5 hours per week - overtime available! Between 6:30 and 9:30 and finish between 15:30 and 18:30 with the option of finishing at 12:30 on Friday assuming you have worked 37.5 hours 12.70 per hour Why work for TeamJobs? Weekly pay (every Friday) Training & progression provided Overtime available PPE provided If you are interested in this opportunity, please click 'apply' today and the team will be in touch to discuss further! INDIT
Oct 01, 2025
Seasonal
Wiring and Mechanical Assembler - Poole TeamJobs are currently working with a fantastic company, recruiting for additional Wiring and Mechanical Assemblers to join their team on a temporary ongoing basis. Responsibilities Prepare and assemble electronic and mechanical parts Follow technical instructions and drawings Ensure assembled products meet quality standards Use of a variety of hand tools Adhere to health and safety regulations Requirements Ideally you will have experience within a assembly role Ability to read and interpret technical drawings and diagrams Basic computer skills Hours & Pay 37.5 hours per week - overtime available! Between 6:30 and 9:30 and finish between 15:30 and 18:30 with the option of finishing at 12:30 on Friday assuming you have worked 37.5 hours 12.70 per hour Why work for TeamJobs? Weekly pay (every Friday) Training & progression provided Overtime available PPE provided If you are interested in this opportunity, please click 'apply' today and the team will be in touch to discuss further! INDIT
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
Sep 26, 2025
Full time
Looking for a hands-on part-time engineering role with variety, flexibility, and great benefits? Join Weald Electronics in Slinfold as a Mechanical Engineer / QC Inspector today! Mechanical EngineerSlinfold, West Sussex 23 - 24.75 hours per week over three days £14 - £14.75 per hour Permanent contract Please Note: Applicants must be authorised to work in the UK Weald Electronics Ltd, part of The Lodge Group, is a trusted manufacturer of high-performance connectors and electro-mechanical assemblies. Known for quality, innovation, and reliability, we support industries where precision is critical. With a supportive culture and opportunities to grow, this is an exciting time to join our dedicated team. The Role We're looking for a skilled Mechanical Engineer / QC Inspector to support our Production, Engineering, and Quality departments. The role is varied, offering plenty of hands-on tasks while also playing a vital role in inspection and quality assurance. Key Responsibilities: Maintain and repair assembly jigs and small tools Manufacture and adapt simple tooling for production Carry out small batch modifications using lathes, drills, milling machines, and hand tools Prototype new parts for testing and evaluation Support the QA department with timely and accurate inspection of sub-assemblies and incoming goods Record inspection results and complete non-conformance reports when required Provide feedback to the Quality Manager to support continuous improvement Operate at all times to company's quality and health & safety standards Benefits: Competitive hourly rate: £14.00 - £14.75 (depending on experience) Contributory pension scheme 23 days holiday + bank holidays (pro rata) Holiday entitlement increases with service (up to 25 days) Paid Christmas closure 2x discretionary annual bonuses (June & December) Employee assistance programme with 24/7 helpline, wellbeing app & discounts Free onsite parking The Ideal Candidate We're looking for a practical engineer with a strong mechanical background and a proactive, adaptable approach. You'll be someone who takes pride in accuracy and can balance both production and quality tasks. About you: Due to the location of this role, applicants must have a valid driving licence and access to their own vehicle Able to interpret technical drawings Previous hands-on experience in machining, toolmaking, or precision engineering Skilled in the use of lathes, drills, mills, and other workshop tools Familiar with mechanical and optical measuring equipment High attention to detail and accuracy Flexible, adaptable, and keen to learn new skills Basic IT skills This is a fantastic opportunity to join a stable, friendly company where you'll receive a full handover before the current post-holder retires. How to apply for the role: If you have the skills and experience required for this position, click "apply" today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. No agencies please. Other suitable skills and experience include Mechanical Technician, Quality Inspector, Toolmaker, Maintenance Engineer, Machinist, CNC Operator, Production Engineer, Mechanical Assembler, Quality Engineer, Fitter/Turner
