Are you ready to bring your technical expertise to a world-leading stage? We are thrilled to partner with a large global manufacturer at the forefront of sustainable engineering to find a skilled Engine Test Technician. Based at their state-of-the-art Research & Development Centre in Peterborough, this is a chance to work within a culture of autonomy and excellence, helping to develop the next generation of power solutions. Location : Peterborough Contract : 12-month contract Pay Rate : 17.00 - 18.90 per hour Working Hours : 37 hours per week, Mon-Thu : 8:00 am - 4:30 pm Fri : 8:00 am - 1:00 pm Working within the Industrial Power Systems Division, you will support engineers in validating the performance and durability of engine components and systems. Your responsibilities will include: Operating test equipment and conducting investigations to obtain, analyse, and summarise critical data. Recording results through curves, charts, and sketches for inclusion in technical reports. Working directly with components and test rigs, including the use of hand/power tools and lifting equipment. Adhering to strict health and safety policies and maintaining a clean work area in line with 5S and TPM standards. Assisting with technical investigations for both current and future green energy product solutions. What You Will Have Background in fuel injection departments and engine component testing. Proficiency in laying strain gauges, soldering electronic components, instrumentation setup, and basic data capture. Experience with ultrasonic bolt monitoring and slip torque testing. High level of accuracy and attention to detail when following complex written instructions. Strong interpersonal skills to effectively liaise across various levels of the organisation. Competence in MS Office packages. An engineering or motor mechanics apprenticeship is highly desirable Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Apr 22, 2026
Contractor
Are you ready to bring your technical expertise to a world-leading stage? We are thrilled to partner with a large global manufacturer at the forefront of sustainable engineering to find a skilled Engine Test Technician. Based at their state-of-the-art Research & Development Centre in Peterborough, this is a chance to work within a culture of autonomy and excellence, helping to develop the next generation of power solutions. Location : Peterborough Contract : 12-month contract Pay Rate : 17.00 - 18.90 per hour Working Hours : 37 hours per week, Mon-Thu : 8:00 am - 4:30 pm Fri : 8:00 am - 1:00 pm Working within the Industrial Power Systems Division, you will support engineers in validating the performance and durability of engine components and systems. Your responsibilities will include: Operating test equipment and conducting investigations to obtain, analyse, and summarise critical data. Recording results through curves, charts, and sketches for inclusion in technical reports. Working directly with components and test rigs, including the use of hand/power tools and lifting equipment. Adhering to strict health and safety policies and maintaining a clean work area in line with 5S and TPM standards. Assisting with technical investigations for both current and future green energy product solutions. What You Will Have Background in fuel injection departments and engine component testing. Proficiency in laying strain gauges, soldering electronic components, instrumentation setup, and basic data capture. Experience with ultrasonic bolt monitoring and slip torque testing. High level of accuracy and attention to detail when following complex written instructions. Strong interpersonal skills to effectively liaise across various levels of the organisation. Competence in MS Office packages. An engineering or motor mechanics apprenticeship is highly desirable Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Valenti Recruitment are working on behalf of our client to recruit a skilled Maintenance Electrician for a well-established, highly automated manufacturing site based in Knutsford. This is a fantastic opportunity to join a clean, organised and forward-thinking environment where all maintenance is carried out during the day no nights, no shifts. The Role You will be working as part of a small, experienced maintenance team, carrying out: Electrical fault finding on automated machinery Breakdown response and preventative maintenance Installation work across industrial equipment Working independently on a range of electrical tasks Supporting continuous improvement across the site What We re Looking For (Essential) 17th or 18th Edition qualified Strong fault-finding experience within an industrial environment Experience working with three-phase systems (distribution boards, SWA, isolators, contactors) Knowledge of industrial machinery (motors, pumps, sensors, heaters) Confident working independently Desirable (Not Essential) Experience with inverters and servo drives PLC knowledge / programming Panel building experience Basic electronics knowledge (analogue/digital) Soldering / PCB repair IT literacy (software installs, backups etc.) Minor mechanical skills The Opportunity Day shift only excellent work/life balance Long-standing, stable team (many employees + years) Clean, well-maintained factory environment Opportunity to work on modern, automated equipment Supportive and friendly team culture Important This role is suited to candidates with previous industrial electrical maintenance experience. Applications without this background will not be considered. If you re looking for a secure, long-term role with a great working environment and no shift work, we d love to hear from you. Benefits: Company events Company pension Free parking On-site parking Sick pay
Apr 22, 2026
Full time
Valenti Recruitment are working on behalf of our client to recruit a skilled Maintenance Electrician for a well-established, highly automated manufacturing site based in Knutsford. This is a fantastic opportunity to join a clean, organised and forward-thinking environment where all maintenance is carried out during the day no nights, no shifts. The Role You will be working as part of a small, experienced maintenance team, carrying out: Electrical fault finding on automated machinery Breakdown response and preventative maintenance Installation work across industrial equipment Working independently on a range of electrical tasks Supporting continuous improvement across the site What We re Looking For (Essential) 17th or 18th Edition qualified Strong fault-finding experience within an industrial environment Experience working with three-phase systems (distribution boards, SWA, isolators, contactors) Knowledge of industrial machinery (motors, pumps, sensors, heaters) Confident working independently Desirable (Not Essential) Experience with inverters and servo drives PLC knowledge / programming Panel building experience Basic electronics knowledge (analogue/digital) Soldering / PCB repair IT literacy (software installs, backups etc.) Minor mechanical skills The Opportunity Day shift only excellent work/life balance Long-standing, stable team (many employees + years) Clean, well-maintained factory environment Opportunity to work on modern, automated equipment Supportive and friendly team culture Important This role is suited to candidates with previous industrial electrical maintenance experience. Applications without this background will not be considered. If you re looking for a secure, long-term role with a great working environment and no shift work, we d love to hear from you. Benefits: Company events Company pension Free parking On-site parking Sick pay
Kickstart Your Career in Tech! Are you a hands-on problem solver with a passion for electronics and technology? We're on the lookout for a motivated Trainee Service Centre Technician to join a leading global organisation at the forefront of electronic measurement innovation. This is a fantastic entry-level opportunity. Based at their modern UK HQ, you'll join a friendly and knowledgeable team working on cutting-edge test and measurement equipment. You'll receive full training and support to help you grow into a skilled technician. This position is offered as a 12-month contract, with a high likelihood of transitioning into a permanent role thereafter. What You'll Be Doing: • Operate and maintain test stations using PC-based software and electronic instrumentation. • Carry out manual measurements of electronic signals using oscilloscopes and other testing tools. • Learn to troubleshoot and fault-find on a wide variety of devices. • Provide updates to customers on service progress and timelines. • Work collaboratively within a team to meet service quality and turnaround goals. • Gain exposure to customer-facing field roles as your skills develop. What We're Looking For: • 5 GCSEs (grades A-C), including Maths, English, and ideally Physics. • A-Level or BTEC qualification in Electronics, Engineering, or similar (advantageous). • Enthusiasm for electronics, technology, and hands-on learning. • Any prior experience with soldering, testing, or troubleshooting is a bonus! • Confident communicator and a team player with a positive, can-do attitude. • Comfortable using Microsoft Word and Excel. Why This Role? This is more than just a job - it's a launchpad. You'll gain real technical skills, industry exposure, and join a company that values learning, collaboration, and innovation. There's excellent scope for progression into more advanced technical roles or customer-facing positions in the future. Working Hours: Full-time, 37.5 hours/week Location: Winnersh Triangle, Berkshire Contract: Initial 12-month contract (likely to convert to permanent) If you're eager to start your career in technology and want to join a company where you'll be supported and challenged - we'd love to hear from you!
Apr 22, 2026
Contractor
Kickstart Your Career in Tech! Are you a hands-on problem solver with a passion for electronics and technology? We're on the lookout for a motivated Trainee Service Centre Technician to join a leading global organisation at the forefront of electronic measurement innovation. This is a fantastic entry-level opportunity. Based at their modern UK HQ, you'll join a friendly and knowledgeable team working on cutting-edge test and measurement equipment. You'll receive full training and support to help you grow into a skilled technician. This position is offered as a 12-month contract, with a high likelihood of transitioning into a permanent role thereafter. What You'll Be Doing: • Operate and maintain test stations using PC-based software and electronic instrumentation. • Carry out manual measurements of electronic signals using oscilloscopes and other testing tools. • Learn to troubleshoot and fault-find on a wide variety of devices. • Provide updates to customers on service progress and timelines. • Work collaboratively within a team to meet service quality and turnaround goals. • Gain exposure to customer-facing field roles as your skills develop. What We're Looking For: • 5 GCSEs (grades A-C), including Maths, English, and ideally Physics. • A-Level or BTEC qualification in Electronics, Engineering, or similar (advantageous). • Enthusiasm for electronics, technology, and hands-on learning. • Any prior experience with soldering, testing, or troubleshooting is a bonus! • Confident communicator and a team player with a positive, can-do attitude. • Comfortable using Microsoft Word and Excel. Why This Role? This is more than just a job - it's a launchpad. You'll gain real technical skills, industry exposure, and join a company that values learning, collaboration, and innovation. There's excellent scope for progression into more advanced technical roles or customer-facing positions in the future. Working Hours: Full-time, 37.5 hours/week Location: Winnersh Triangle, Berkshire Contract: Initial 12-month contract (likely to convert to permanent) If you're eager to start your career in technology and want to join a company where you'll be supported and challenged - we'd love to hear from you!
This Controls Technician position is an opportunity to join globally recognised engineering business at the forefront of advanced materials and sustainable technology. This Controls Technician role offers a secure, technically engaging career within a modern manufacturing environment. The Controls Technician will be days based, working Monday to Friday, and receive benefits including 25 days holiday plus bank holidays, optional 5 days holiday or 2% bonus and competitive pension scheme. Responsibilities of the Controls Technician; Provide technical support for control systems including DeltaV DCS Diagnose faults and deliver rapid solutions to minimise downtime Maintain and configure automation platforms and historian tools Support plant improvements and continuous optimisation projects Assist with commissioning, testing, and system upgrades Ensure compliance with safety and regulatory standards In order to be successful in this position as Controls Technician it would be beneficial to have an apprenticeship, NVQ, BTEC, HNC, HND or Degree in Electrical & Electronic Engineering, Instrumentation & Automation, Chemical Engineering or related Engineering discipline. It would be ideal if the candidate held a CompEx certification, or had the willingness to obtain this with the support of the company. Functional Safety, Safety Instrumented Systems experience would also be positive, though not essential, for example TUV FSEng. Please apply directly for this Controls Technician role for further information.
Apr 22, 2026
Full time
This Controls Technician position is an opportunity to join globally recognised engineering business at the forefront of advanced materials and sustainable technology. This Controls Technician role offers a secure, technically engaging career within a modern manufacturing environment. The Controls Technician will be days based, working Monday to Friday, and receive benefits including 25 days holiday plus bank holidays, optional 5 days holiday or 2% bonus and competitive pension scheme. Responsibilities of the Controls Technician; Provide technical support for control systems including DeltaV DCS Diagnose faults and deliver rapid solutions to minimise downtime Maintain and configure automation platforms and historian tools Support plant improvements and continuous optimisation projects Assist with commissioning, testing, and system upgrades Ensure compliance with safety and regulatory standards In order to be successful in this position as Controls Technician it would be beneficial to have an apprenticeship, NVQ, BTEC, HNC, HND or Degree in Electrical & Electronic Engineering, Instrumentation & Automation, Chemical Engineering or related Engineering discipline. It would be ideal if the candidate held a CompEx certification, or had the willingness to obtain this with the support of the company. Functional Safety, Safety Instrumented Systems experience would also be positive, though not essential, for example TUV FSEng. Please apply directly for this Controls Technician role for further information.
Job Title: CNC Manual Grinder Location: Wolverhampton Industry: Aerospace Contract Type: Permanent £42,161 + 16.67% shift uplift (£49,100) Shift: Double Days The Role - CNC Manual Grinder My client, a leading manufacture specialising in the aerospace and defence industry, is currently seeking a talented CNC Grinder to join their team. As a CNC Grinder you'll be responsible for operating and setting CNC Studer machines to produce parts to extremely tight tolerances. You'll be joining a great team within a vibrant employment sector. Duties - CNC Manual Grinder Operate and set CNC Studer grinding machines. Grind and machine exotic and hardened materials with precision. Perform first-off inspections and complete relevant quality documentation. Experience of Internal and External Grinding of complex components. Set up and run multiple machines and processes. Background - CNC Manual Grinder A recognised engineering apprenticeship. CNC grinding experience required. Good knowledge of machining techniques and appropriate tooling. Attention to detail and accuracy and process improvement. For more information on this role, please contact Lee Powell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a CNC Machinist, Grinding Technician, CNC Lathe Operator, CNC Mill/ Turn Operator, Manual Grinder, CNC Grinder, Computer numerical machinist, Machine Setter/Operators and more. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Apr 21, 2026
Full time
Job Title: CNC Manual Grinder Location: Wolverhampton Industry: Aerospace Contract Type: Permanent £42,161 + 16.67% shift uplift (£49,100) Shift: Double Days The Role - CNC Manual Grinder My client, a leading manufacture specialising in the aerospace and defence industry, is currently seeking a talented CNC Grinder to join their team. As a CNC Grinder you'll be responsible for operating and setting CNC Studer machines to produce parts to extremely tight tolerances. You'll be joining a great team within a vibrant employment sector. Duties - CNC Manual Grinder Operate and set CNC Studer grinding machines. Grind and machine exotic and hardened materials with precision. Perform first-off inspections and complete relevant quality documentation. Experience of Internal and External Grinding of complex components. Set up and run multiple machines and processes. Background - CNC Manual Grinder A recognised engineering apprenticeship. CNC grinding experience required. Good knowledge of machining techniques and appropriate tooling. Attention to detail and accuracy and process improvement. For more information on this role, please contact Lee Powell on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a CNC Machinist, Grinding Technician, CNC Lathe Operator, CNC Mill/ Turn Operator, Manual Grinder, CNC Grinder, Computer numerical machinist, Machine Setter/Operators and more. For details of other opportunities available within your chosen field please visit our website (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Quality Inspector Tewkesbury Permanent Competitive salary plus benefits Quality Inspector required by hugely successful and growing company based in Tewkesbury. The successful Quality Inspector will be responsible for ensuring that quality standards are met on parts and assemblies utilising a range of inspection tools. Main Duties: Quality Inspector Inspection of complex mechanical parts using a range of inspection tools and equipment. Using microscopes to carry out inspection of subcontract parts. Managing product conformance with customers specifications and designs. Completing First Article Inspection Reports and associated paperwork. Raising and managing nonconformance reports. Supporting the wider business with product quality issues. Ensuring the correct calibration of measuring equipment. The successful candidate will be able to demonstrate the following: Quality Inspector A background within a similar Quality Inspector role gained in a manufacturing or engineering or equivalent environment. Experience of First Article inspection reporting to AS9102. Experience using measuring equipment such as CMM. The ability to read and interpret engineering drawings. Able to work on own initiative and with minimum supervision. Excellent written and verbal communication skills. Proficient with Microsoft Office What we are able to offer Quality Inspector A range of flexible benefits. Private medical insurance. Onsite parking and gym facilities. If you are already a Quality Inspector, Quality Technician, Final Inspector, you may also be suitable for this role. Please contact Anna Hinton (phone number removed) (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
Apr 21, 2026
Full time
Quality Inspector Tewkesbury Permanent Competitive salary plus benefits Quality Inspector required by hugely successful and growing company based in Tewkesbury. The successful Quality Inspector will be responsible for ensuring that quality standards are met on parts and assemblies utilising a range of inspection tools. Main Duties: Quality Inspector Inspection of complex mechanical parts using a range of inspection tools and equipment. Using microscopes to carry out inspection of subcontract parts. Managing product conformance with customers specifications and designs. Completing First Article Inspection Reports and associated paperwork. Raising and managing nonconformance reports. Supporting the wider business with product quality issues. Ensuring the correct calibration of measuring equipment. The successful candidate will be able to demonstrate the following: Quality Inspector A background within a similar Quality Inspector role gained in a manufacturing or engineering or equivalent environment. Experience of First Article inspection reporting to AS9102. Experience using measuring equipment such as CMM. The ability to read and interpret engineering drawings. Able to work on own initiative and with minimum supervision. Excellent written and verbal communication skills. Proficient with Microsoft Office What we are able to offer Quality Inspector A range of flexible benefits. Private medical insurance. Onsite parking and gym facilities. If you are already a Quality Inspector, Quality Technician, Final Inspector, you may also be suitable for this role. Please contact Anna Hinton (phone number removed) (url removed) Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.
As RME Manager II, your location will be at site and your roles and responsibilities will be Responsible for the overall building and facilities maintenance (Reliability, Performance, Cost, etc.) Responsible for ensuring compliance standards/laws of India. These include Hazwaste management, Pressure vessels, Calibrations, Pollution control board requirements, Electricity board requirements, weights & measurement, license & permits. Responsible ensuring the FSSAI food safety standards in the building, which includes pest control, building cleanliness, ensuring all related documents of FSSAI. Responsible for ensuring upkeep and availability of common area lighting, fire protection, STP and any others which are in Landlord scope by close coordination with Landlord and Amazon Real Estate team. Involve in site launch discussions and ensure all the previous learnings are being incorporated in the design. Responsible for preparation of annual OPEX and CAPEX budgets and ensure to achieve the spent targets set by leadership team. Responsible for preparation of RCA for any incidents/breakdowns and ensuring elimination of root causes. Create contingency plans for critical equipment and ensuring the effectiveness. Responsible for SOP preparation/updation, also adherence of the same by all members. Understanding the benchmarks of Amazon RME activities and has to meet/raise the bar of the same. Responsible for equipment maintenance (Conveyors, workstations, Labeling Machines, PLC control systems, electrical systems, trolleys etc.) Responsible to give timely feedback/inputs to their team members and evaluate them in yearly performance review. Develop and apply Preventive Maintenance Routines on equipment. Ensure the contractors/vendors follow the rules at all times and the projects are handled with minimum inconvenience to the site operations. Develop and implement vendor AMCs with appropriate service levels for equipment Follow up required material purchasing with the Procurement Team Responsible for preparation of critical spares list for all installations as per manufacturer's recommendations and plan and maintain the required inventory at site at all-time where the maintenance is carried out with in-house teams Provide feedback and analysis on equipment performance and availability Manage day-to-day issues on equipment with the Operations teams, defining Priorities with Operation, and organize the work accordingly. Responsible to manage a team of Maintenance technicians and 3rd party facilities service provider. Define goals, priorities, organized staff planning, staff training to ensure service levels. Responsible to keep people working in a safe environment, applying the Amazon Safety Policy and working with the Safety team to improve safety on site. Responsible for building housekeeping to keep the site within 5S standards by managing a diverse team and ensure all the standards are followed. Responsible for maintaining, following, upgrading and storing of relevant documents for RME function. Support the Engineering & projects team for installation of new equipment. Ensure the installation, operation & performance standards of any equipment/asset are in line with Amazon standards. Be a leader within the group as well as within other teams. Be positive and offer creative out of the box solutions. Provide immediate technical guidance to operations during critical events. Basic Qualifications 6+ years of team management, budget responsibilities, supplier management, problem solving, and client/ customer relations experience Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays Experience with computers, including MS Excel, Word and Office Experience with preventive maintenance procedures, industrial electrical, industrial controls, and industrial conveyors along with utilities Preferred Qualifications 5+ years of team management, budget responsibilities, supplier management, problem solving, and client/ customer relations experience Experience with preventive maintenance procedures, industrial electrical, industrial controls, and industrial electronics & robotics Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Apr 21, 2026
Full time
As RME Manager II, your location will be at site and your roles and responsibilities will be Responsible for the overall building and facilities maintenance (Reliability, Performance, Cost, etc.) Responsible for ensuring compliance standards/laws of India. These include Hazwaste management, Pressure vessels, Calibrations, Pollution control board requirements, Electricity board requirements, weights & measurement, license & permits. Responsible ensuring the FSSAI food safety standards in the building, which includes pest control, building cleanliness, ensuring all related documents of FSSAI. Responsible for ensuring upkeep and availability of common area lighting, fire protection, STP and any others which are in Landlord scope by close coordination with Landlord and Amazon Real Estate team. Involve in site launch discussions and ensure all the previous learnings are being incorporated in the design. Responsible for preparation of annual OPEX and CAPEX budgets and ensure to achieve the spent targets set by leadership team. Responsible for preparation of RCA for any incidents/breakdowns and ensuring elimination of root causes. Create contingency plans for critical equipment and ensuring the effectiveness. Responsible for SOP preparation/updation, also adherence of the same by all members. Understanding the benchmarks of Amazon RME activities and has to meet/raise the bar of the same. Responsible for equipment maintenance (Conveyors, workstations, Labeling Machines, PLC control systems, electrical systems, trolleys etc.) Responsible to give timely feedback/inputs to their team members and evaluate them in yearly performance review. Develop and apply Preventive Maintenance Routines on equipment. Ensure the contractors/vendors follow the rules at all times and the projects are handled with minimum inconvenience to the site operations. Develop and implement vendor AMCs with appropriate service levels for equipment Follow up required material purchasing with the Procurement Team Responsible for preparation of critical spares list for all installations as per manufacturer's recommendations and plan and maintain the required inventory at site at all-time where the maintenance is carried out with in-house teams Provide feedback and analysis on equipment performance and availability Manage day-to-day issues on equipment with the Operations teams, defining Priorities with Operation, and organize the work accordingly. Responsible to manage a team of Maintenance technicians and 3rd party facilities service provider. Define goals, priorities, organized staff planning, staff training to ensure service levels. Responsible to keep people working in a safe environment, applying the Amazon Safety Policy and working with the Safety team to improve safety on site. Responsible for building housekeeping to keep the site within 5S standards by managing a diverse team and ensure all the standards are followed. Responsible for maintaining, following, upgrading and storing of relevant documents for RME function. Support the Engineering & projects team for installation of new equipment. Ensure the installation, operation & performance standards of any equipment/asset are in line with Amazon standards. Be a leader within the group as well as within other teams. Be positive and offer creative out of the box solutions. Provide immediate technical guidance to operations during critical events. Basic Qualifications 6+ years of team management, budget responsibilities, supplier management, problem solving, and client/ customer relations experience Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays Experience with computers, including MS Excel, Word and Office Experience with preventive maintenance procedures, industrial electrical, industrial controls, and industrial conveyors along with utilities Preferred Qualifications 5+ years of team management, budget responsibilities, supplier management, problem solving, and client/ customer relations experience Experience with preventive maintenance procedures, industrial electrical, industrial controls, and industrial electronics & robotics Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Environmental Services Technician Assistant 37 hours per week We require between 10-12 strimmers for grass cutting season which is planned to be between Mid March 2025 and end of October 2025. The job will mainly include working with ground maintenance team but when required operative will be required to work with cleansing team: litterpicking, assisting area cabac drivers and completing specific tasks. Skills GCSE English and Maths or equivalent 2Use of basic electronic communication systems e.g. smartphone, email. Knowledge of basic health and safety standards associated with this type of work Ability to safely operate basic power tools or equipment associated with the tasks of the role. Able to carry out routine maintenance tasks under direction. Able to communicate effectively verbally in person or over the phone. Able to adapt to change e.g. colleagues, settings and working environment. Experience Experience of working as part of a team Experience of following instructions and applying them to the task in hand. The ability to work flexibly across 7 days. Ability to meet the travel requirements of the post. Interested Please apply
Apr 21, 2026
Seasonal
Environmental Services Technician Assistant 37 hours per week We require between 10-12 strimmers for grass cutting season which is planned to be between Mid March 2025 and end of October 2025. The job will mainly include working with ground maintenance team but when required operative will be required to work with cleansing team: litterpicking, assisting area cabac drivers and completing specific tasks. Skills GCSE English and Maths or equivalent 2Use of basic electronic communication systems e.g. smartphone, email. Knowledge of basic health and safety standards associated with this type of work Ability to safely operate basic power tools or equipment associated with the tasks of the role. Able to carry out routine maintenance tasks under direction. Able to communicate effectively verbally in person or over the phone. Able to adapt to change e.g. colleagues, settings and working environment. Experience Experience of working as part of a team Experience of following instructions and applying them to the task in hand. The ability to work flexibly across 7 days. Ability to meet the travel requirements of the post. Interested Please apply
Get Staffed Online Recruitment Limited
Andover, Hampshire
Service Technician £28,000 - £38,000 per annum Based in Andover, Hampshire Full-time Monday to Friday, 7am to 4pm with 30 minutes unpaid lunch break 42.5 hours per week About the Company This organisation is a bold, forward-thinking manufacturer with a passion for excellence in product design, sales, and production. Over the past 12 years, the business has achieved significant growth in revenue and output, with ambitious plans in place to accelerate even further. The brand is widely recognised across the UK and Europe for its premium quality, exceptional performance, and unbeatable aftercare. With new product launches and continued investment in innovation, this is a fantastic time to join a business that's shaping the future of the Arboriculture industry. The Role You will be working in the workshop, servicing, diagnosing and repairing mechanical equipment. That includes strip-down, rebuild, fault-finding and getting loan equipment back out the door in good order. The work covers hydraulics, engines and electronics. You will be hands-on from day one. A second position is also available at a senior level (£40,000 to £45,000), which carries team leader responsibilities. If you have the experience and want a bit more ownership over how things run, that one may suit you better. What you will be doing: Machine check-overs on loan equipment. Nut and bolt strip-downs and full refurbishments. Fault diagnosis and repair of broken machinery. MIG welding as part of the repair process. Rewiring and basic electronic assembly work. What you need to bring: Strong mechanical knowledge with relevant qualifications or equivalent experience. Experience working with plant, machinery or similar mechanical equipment. Experience working in a workshop environment. Full UK driving licence. The ideal candidate: Strong attention to detail. Highly organised and able to manage multiple tasks. Practical, hands-on and solutions focused. Strong work ethic and reliability. Ability to work independently and as part of a team. Positive attitude and willingness to learn. Pride in delivering high-quality work. What you can expect in return Your salary will reflect what you are actually capable of. If you perform well, you will progress. There is no fixed ceiling. Recruited by our client Our client is an outsourced Employee Lifecycle company, helping businesses with all things HR, Recruitment and Neurodiversity. If you have experience as a Mechanical Fitter, Mechanical Technician, Workshop Technician, Workshop Foreman, Workshop Team Leader or Service Technician, or if you come from an automotive, agricultural or mechanical diagnostics background, they would love to hear from you.
Apr 21, 2026
Full time
Service Technician £28,000 - £38,000 per annum Based in Andover, Hampshire Full-time Monday to Friday, 7am to 4pm with 30 minutes unpaid lunch break 42.5 hours per week About the Company This organisation is a bold, forward-thinking manufacturer with a passion for excellence in product design, sales, and production. Over the past 12 years, the business has achieved significant growth in revenue and output, with ambitious plans in place to accelerate even further. The brand is widely recognised across the UK and Europe for its premium quality, exceptional performance, and unbeatable aftercare. With new product launches and continued investment in innovation, this is a fantastic time to join a business that's shaping the future of the Arboriculture industry. The Role You will be working in the workshop, servicing, diagnosing and repairing mechanical equipment. That includes strip-down, rebuild, fault-finding and getting loan equipment back out the door in good order. The work covers hydraulics, engines and electronics. You will be hands-on from day one. A second position is also available at a senior level (£40,000 to £45,000), which carries team leader responsibilities. If you have the experience and want a bit more ownership over how things run, that one may suit you better. What you will be doing: Machine check-overs on loan equipment. Nut and bolt strip-downs and full refurbishments. Fault diagnosis and repair of broken machinery. MIG welding as part of the repair process. Rewiring and basic electronic assembly work. What you need to bring: Strong mechanical knowledge with relevant qualifications or equivalent experience. Experience working with plant, machinery or similar mechanical equipment. Experience working in a workshop environment. Full UK driving licence. The ideal candidate: Strong attention to detail. Highly organised and able to manage multiple tasks. Practical, hands-on and solutions focused. Strong work ethic and reliability. Ability to work independently and as part of a team. Positive attitude and willingness to learn. Pride in delivering high-quality work. What you can expect in return Your salary will reflect what you are actually capable of. If you perform well, you will progress. There is no fixed ceiling. Recruited by our client Our client is an outsourced Employee Lifecycle company, helping businesses with all things HR, Recruitment and Neurodiversity. If you have experience as a Mechanical Fitter, Mechanical Technician, Workshop Technician, Workshop Foreman, Workshop Team Leader or Service Technician, or if you come from an automotive, agricultural or mechanical diagnostics background, they would love to hear from you.
Job Description: RIGHT TO WORK: Candidates must possess unrestricted legal authorisation to work in the United Kingdom on a permanent basis. We are unable to provide sponsorship for this role; therefore, all applicants must be able to demonstrate their right to work without the need for a visa or company sponsorship (e.g., British or Irish citizenship, Settled Status, or Indefinite Leave to Remain). SECURITY CLEARANCE: You will be subject to BPSS and Export Control checks (including a criminal record check) Access NI Check in Northern Ireland TRAVEL REQUIRED: Occasional travel within UK LOCATION: Belfast TYPE: Full time Do you have a skilled trade? Are you looking for a new challenge in a cutting-edge manufacturing environment? WHAT'S IN IT FOR YOU Earn £32,495.32 rising to £35,367.80, overtime and shift premiums may be available - a typical experienced Fitter working overtime and shifts can earn over £40,000 per annum! Airbus Belfast Limited offers a generous package of benefits including: Holidays: 260 hours paid holiday p/a inc. public holidays Overtime: attractive rates and shift allowances Employee Assistance Programme (EAP): Mental Health and Wellbeing support platform Life Assurance: 2x Basic Salary (whilst a member of the Pension Scheme) Pension: Airbus will match employee contributions between 5 - 8% AIRBUS BELFAST Our world is changing. And at Airbus, so are we. From our commitment to zero-carbon flight ( # ZEROe ) to cleaning up space , sustainability is at the heart of our purpose. So what's your next change? To support extensive ramp-up activity in our A220 composite wing programme, we are immediately seeking skilled operatives to expand our production team. This is an opportunity to join Airbus and develop your skills to a whole new level with a highly attractive salary and benefits package. ABOUT YOUR QUALIFICATIONS To be part of our success story, you ll have: completed a recognised engineering apprenticeship as: Aircraft Maintenance Technician, Motor Mechanic, Sheet Metal Worker, Carpentry, Coach Builder, Coppersmith, Aircraft Technician, Mechanical & Maintenance Fitter, Panel Beater, Sheet Metal, Pattern Maker, Toolfitter, Car Body Operator, Boiler Maker, Machinist, Pipe Fitter, Diesel Fitter, Plumber, Vehicle Repair and Maintenance Welder, Fabricator or in a similar skilled trade where you have gained a Level 3 diploma Or four years experience in a skilled role in one of the afore mentioned disciplines with a Level 3 (NVQ, SVQ, IMI, BTEC) in any mechanical engineering discipline (not Electrical or Electronic) Aircraft-fitting experience is not essential as full training will be provided. After initial product training, your role will involve checking kit parts up to drawing schedules, manufacturing a range of aerospace hardware to a high standard and maintaining a safe and healthy working environment. You will also need to be able to read and interpret engineering drawings and be happy to work a range of shifts plus overtime, as required. Not a 100% match? No worries! Airbus supports your personal growth with customised development solution s. We employ people from all sections of the community and are committed to the appointment of the best candidate based upon the merit principle alone. In pursuit of our equal opportunities programme, we would particularly welcome more applications from Catholics and females, as these groups are currently under-represented in our workforce. HOW WE CAN SUPPORT YOU Please let us know if you need us to make any adjustments for the selection process - you can share this with your Talent Acquisition Partner if you are invited to interview. Examples may include (but not exclusive to) accessible facilities; auxiliary aids; room layout, etc. Any information disclosed will be treated in the strictest confidence. As a Disability Confident Employer, Airbus UK will offer an interview to any applicant that considers themselves to have a disability or long-term condition under the Equality Act 2010 and meets the minimum criteria of the role (as set out in the job advert). To opt in , just select the option during your application submission and your application will be considered accordingly. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company s success, reputation and sustainable growth. Company: Airbus Belfast Limited Employment Type: Permanent - Experience Level: Professional Job Family: Assembly & Integration By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
Apr 21, 2026
Full time
Job Description: RIGHT TO WORK: Candidates must possess unrestricted legal authorisation to work in the United Kingdom on a permanent basis. We are unable to provide sponsorship for this role; therefore, all applicants must be able to demonstrate their right to work without the need for a visa or company sponsorship (e.g., British or Irish citizenship, Settled Status, or Indefinite Leave to Remain). SECURITY CLEARANCE: You will be subject to BPSS and Export Control checks (including a criminal record check) Access NI Check in Northern Ireland TRAVEL REQUIRED: Occasional travel within UK LOCATION: Belfast TYPE: Full time Do you have a skilled trade? Are you looking for a new challenge in a cutting-edge manufacturing environment? WHAT'S IN IT FOR YOU Earn £32,495.32 rising to £35,367.80, overtime and shift premiums may be available - a typical experienced Fitter working overtime and shifts can earn over £40,000 per annum! Airbus Belfast Limited offers a generous package of benefits including: Holidays: 260 hours paid holiday p/a inc. public holidays Overtime: attractive rates and shift allowances Employee Assistance Programme (EAP): Mental Health and Wellbeing support platform Life Assurance: 2x Basic Salary (whilst a member of the Pension Scheme) Pension: Airbus will match employee contributions between 5 - 8% AIRBUS BELFAST Our world is changing. And at Airbus, so are we. From our commitment to zero-carbon flight ( # ZEROe ) to cleaning up space , sustainability is at the heart of our purpose. So what's your next change? To support extensive ramp-up activity in our A220 composite wing programme, we are immediately seeking skilled operatives to expand our production team. This is an opportunity to join Airbus and develop your skills to a whole new level with a highly attractive salary and benefits package. ABOUT YOUR QUALIFICATIONS To be part of our success story, you ll have: completed a recognised engineering apprenticeship as: Aircraft Maintenance Technician, Motor Mechanic, Sheet Metal Worker, Carpentry, Coach Builder, Coppersmith, Aircraft Technician, Mechanical & Maintenance Fitter, Panel Beater, Sheet Metal, Pattern Maker, Toolfitter, Car Body Operator, Boiler Maker, Machinist, Pipe Fitter, Diesel Fitter, Plumber, Vehicle Repair and Maintenance Welder, Fabricator or in a similar skilled trade where you have gained a Level 3 diploma Or four years experience in a skilled role in one of the afore mentioned disciplines with a Level 3 (NVQ, SVQ, IMI, BTEC) in any mechanical engineering discipline (not Electrical or Electronic) Aircraft-fitting experience is not essential as full training will be provided. After initial product training, your role will involve checking kit parts up to drawing schedules, manufacturing a range of aerospace hardware to a high standard and maintaining a safe and healthy working environment. You will also need to be able to read and interpret engineering drawings and be happy to work a range of shifts plus overtime, as required. Not a 100% match? No worries! Airbus supports your personal growth with customised development solution s. We employ people from all sections of the community and are committed to the appointment of the best candidate based upon the merit principle alone. In pursuit of our equal opportunities programme, we would particularly welcome more applications from Catholics and females, as these groups are currently under-represented in our workforce. HOW WE CAN SUPPORT YOU Please let us know if you need us to make any adjustments for the selection process - you can share this with your Talent Acquisition Partner if you are invited to interview. Examples may include (but not exclusive to) accessible facilities; auxiliary aids; room layout, etc. Any information disclosed will be treated in the strictest confidence. As a Disability Confident Employer, Airbus UK will offer an interview to any applicant that considers themselves to have a disability or long-term condition under the Equality Act 2010 and meets the minimum criteria of the role (as set out in the job advert). To opt in , just select the option during your application submission and your application will be considered accordingly. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company s success, reputation and sustainable growth. Company: Airbus Belfast Limited Employment Type: Permanent - Experience Level: Professional Job Family: Assembly & Integration By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.
We are supporting a highly respected engineering organisation delivering specialist communications and electronic systems into the UK Defence sector. Their technology supports critical military capability and operates within highly regulated and technically demanding programmes. They now have a requirement for a Defence Communications Technician to join their team in Gateshead click apply for full job details
Apr 21, 2026
Full time
We are supporting a highly respected engineering organisation delivering specialist communications and electronic systems into the UK Defence sector. Their technology supports critical military capability and operates within highly regulated and technically demanding programmes. They now have a requirement for a Defence Communications Technician to join their team in Gateshead click apply for full job details
TGRC has partnered with a UK-based applied science and advanced engineering firm that specializes in developing industrial solutions through a multi-disciplinary approach across the automotive, aerospace, and chemical sectors. Positioned at the crossroads of sustainability and scalable innovation, the company empowers manufacturers to incorporate carbon-derived silica into a wide range of products - from tyres to touchscreens - while significantly reducing emissions. We are looking for a proactive and detail-focused Laboratory Technician to support a research project focused on the kinetics of gas-phase reactions. This role is highly interdisciplinary, blending experimental chemistry, programming, and the design, construction, and testing of laboratory equipment. It offers a hands-on opportunity for creative problem-solving in a dynamic research environment. Key Responsibilities: Assist in the design, assembly, and maintenance of experimental setups for gas-phase reaction studies. Heavily involved in running chemical processes. Building, developing and tuning chemical processes. Involved in physical tasks such as fixing, cleaning, and adjusting the reactor test beds. Perform mechanical assembly tasks, including tool handling, pipework cutting, and basic electronics construction. Conduct system testing and execute chemical processes as developed by the research team. Work with gas handling systems, including the installation, modification, and troubleshooting of gas lines, valves, fittings, and tubing. Perform basic electronic assembly for custom sensors and data acquisition systems. Program, operate, and maintain control systems for experimental equipment. Support data collection and perform preliminary data analysis, including the development of custom scripts using Python. Operate and maintain gas chromatographs to ensure accurate analytical measurements. Collaborate with researchers and engineers to convert experimental hypotheses into functional prototypes. Ensure thorough documentation of experimental procedures, system configurations, and maintenance activities. Contribute to iterative improvements of experimental designs and resolve technical challenges in collaboration with the broader team. Required Experience: Technical qualification or equivalent practical experience in chemistry, chemical engineering, electronics, physics, or a related discipline Strong problem-solving abilities with a hands-on, inquisitive mindset Experience working with mechanical components such as pipes, valves, and pressure fittings Proficient in soldering and knowledgeable in basic electronics fundamentals Preferred Experience: Skilled in Python programming, particularly for hardware integration and data acquisition tasks Experience using control devices such as Raspberry Pi, Arduino, or other microcontrollers Familiar with the operation and maintenance of gas chromatographs Basic understanding of physical chemistry and experience in wet chemistry lab environments Prior commercial or industry experience is an advantage
Apr 21, 2026
Full time
TGRC has partnered with a UK-based applied science and advanced engineering firm that specializes in developing industrial solutions through a multi-disciplinary approach across the automotive, aerospace, and chemical sectors. Positioned at the crossroads of sustainability and scalable innovation, the company empowers manufacturers to incorporate carbon-derived silica into a wide range of products - from tyres to touchscreens - while significantly reducing emissions. We are looking for a proactive and detail-focused Laboratory Technician to support a research project focused on the kinetics of gas-phase reactions. This role is highly interdisciplinary, blending experimental chemistry, programming, and the design, construction, and testing of laboratory equipment. It offers a hands-on opportunity for creative problem-solving in a dynamic research environment. Key Responsibilities: Assist in the design, assembly, and maintenance of experimental setups for gas-phase reaction studies. Heavily involved in running chemical processes. Building, developing and tuning chemical processes. Involved in physical tasks such as fixing, cleaning, and adjusting the reactor test beds. Perform mechanical assembly tasks, including tool handling, pipework cutting, and basic electronics construction. Conduct system testing and execute chemical processes as developed by the research team. Work with gas handling systems, including the installation, modification, and troubleshooting of gas lines, valves, fittings, and tubing. Perform basic electronic assembly for custom sensors and data acquisition systems. Program, operate, and maintain control systems for experimental equipment. Support data collection and perform preliminary data analysis, including the development of custom scripts using Python. Operate and maintain gas chromatographs to ensure accurate analytical measurements. Collaborate with researchers and engineers to convert experimental hypotheses into functional prototypes. Ensure thorough documentation of experimental procedures, system configurations, and maintenance activities. Contribute to iterative improvements of experimental designs and resolve technical challenges in collaboration with the broader team. Required Experience: Technical qualification or equivalent practical experience in chemistry, chemical engineering, electronics, physics, or a related discipline Strong problem-solving abilities with a hands-on, inquisitive mindset Experience working with mechanical components such as pipes, valves, and pressure fittings Proficient in soldering and knowledgeable in basic electronics fundamentals Preferred Experience: Skilled in Python programming, particularly for hardware integration and data acquisition tasks Experience using control devices such as Raspberry Pi, Arduino, or other microcontrollers Familiar with the operation and maintenance of gas chromatographs Basic understanding of physical chemistry and experience in wet chemistry lab environments Prior commercial or industry experience is an advantage
Your new company A global leader in industrial technology and automation, this organisation designs and manufactures advanced drive and control solutions used worldwide. Based at an award-winning manufacturing site in Congleton, the business combines engineering excellence with a strong focus on innovation, digitisation, and continuous improvement. You'll be part of a collaborative, forward-thinking environment where engineering best practice is shared globally. Your new role As a Test Engineer within a high-performance manufacturing environment, you'll take ownership of delivering robust, scalable test solutions across a variable speed drives portfolio. The role blends hands-on engineering with continuous improvement, supporting both existing production and new product introductions.You'll design, deploy, and maintain PCB- and product-level test systems, ensuring reliability, efficiency, and compliance. Working closely with manufacturing, quality, and global engineering teams, you'll analyse machine data, troubleshoot issues, and drive capability improvements. You'll also play a key role in mentoring technicians and colleagues on test engineering principles.This role suits engineers from electronics, test, automation, manufacturing, or electrical engineering backgrounds who enjoy problem-solving in a fast-paced, technology-led environment. What you'll need to succeed Essential: Electrical and Electronic Engineering Qualification, e.g NVQ Level 3, HNC, Degree (or equivalent experience) Hands-on experience with automated and/or manual test systems in a manufacturing environment Strong problem-solving capability, including the use of statistical or data-driven methods Ability to communicate complex technical topics clearly to both technical and non-technical audiences Desirable: Exposure to programming (e.g. C/C++, graphical or low-code environments) Experience with ICT or flying-probe test platforms (e.g. Keysight, Teradyne, Takaya, SPEA) Familiarity with PLC-based control systems (TIA Portal experience advantageous) Knowledge of PUWER and practical risk assessment processes What you'll get in return Salary up to 55,000 Annual performance-related bonus Flexible working hours to support work-life balance Generous pension scheme with employer contributions of up to 10% 26 days' annual leave plus bank holidays Option to buy or sell up to 5 additional days of holiday Long-term career development within a global engineering organisation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Apr 20, 2026
Full time
Your new company A global leader in industrial technology and automation, this organisation designs and manufactures advanced drive and control solutions used worldwide. Based at an award-winning manufacturing site in Congleton, the business combines engineering excellence with a strong focus on innovation, digitisation, and continuous improvement. You'll be part of a collaborative, forward-thinking environment where engineering best practice is shared globally. Your new role As a Test Engineer within a high-performance manufacturing environment, you'll take ownership of delivering robust, scalable test solutions across a variable speed drives portfolio. The role blends hands-on engineering with continuous improvement, supporting both existing production and new product introductions.You'll design, deploy, and maintain PCB- and product-level test systems, ensuring reliability, efficiency, and compliance. Working closely with manufacturing, quality, and global engineering teams, you'll analyse machine data, troubleshoot issues, and drive capability improvements. You'll also play a key role in mentoring technicians and colleagues on test engineering principles.This role suits engineers from electronics, test, automation, manufacturing, or electrical engineering backgrounds who enjoy problem-solving in a fast-paced, technology-led environment. What you'll need to succeed Essential: Electrical and Electronic Engineering Qualification, e.g NVQ Level 3, HNC, Degree (or equivalent experience) Hands-on experience with automated and/or manual test systems in a manufacturing environment Strong problem-solving capability, including the use of statistical or data-driven methods Ability to communicate complex technical topics clearly to both technical and non-technical audiences Desirable: Exposure to programming (e.g. C/C++, graphical or low-code environments) Experience with ICT or flying-probe test platforms (e.g. Keysight, Teradyne, Takaya, SPEA) Familiarity with PLC-based control systems (TIA Portal experience advantageous) Knowledge of PUWER and practical risk assessment processes What you'll get in return Salary up to 55,000 Annual performance-related bonus Flexible working hours to support work-life balance Generous pension scheme with employer contributions of up to 10% 26 days' annual leave plus bank holidays Option to buy or sell up to 5 additional days of holiday Long-term career development within a global engineering organisation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)
Your new company An innovative and successful engineering company in the heart of Belfast have a need for Assembly Technicians with soldering experience. Their Belfast site is a major centre for engineering, production, and R&D, bringing together multidisciplinary teams working at the forefront of precision manufacturing. The company is known for its strong technical expertise, high quality standards, and commitment to continuous improvement. Employees benefit from a modern, collaborative environment where cutting edge technology and scientific advancement are central to daily operations. Your new role You will join a high tech production environment supporting the Cameras Production team. As an Electrical Assembly Technician, you will be responsible for ensuring high quality assembly, inspection, and testing of components across Cleanroom or QC areas.Key responsibilities include: Performing incoming QC checks in line with work instructions Testing coolers and components to confirm correct specification before build Inspecting components Following engineering work instructions and basic assembly procedures Mounting components into assembly jigs with precision and care Completing assembly and test records accurately Adhering strictly to production processes and quality control standards Supporting continuous improvement activities Taking ownership of output, delivery, and quality against production targets What you'll need to succeed ONC/OND or equivalent, or GCSEs (Maths & English Grade C or above) with at least 2 years' experience in a high tech production environment Strong manual dexterity for handling small and delicate components Good written and verbal communication skills IT literacy and ability to follow digital work instructions High attention to detail and a strong commitment to quality Ability to work effectively within a structured production environment What you'll get in return Hourly rate of £14.78 Voluntary overtime opportunities. Time and half Flexi start and finish times. Experience in a precision focused, high technology production setting Contract running until September 2026 with potential extension Supportive team environment and clear work processes What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Apr 20, 2026
Full time
Your new company An innovative and successful engineering company in the heart of Belfast have a need for Assembly Technicians with soldering experience. Their Belfast site is a major centre for engineering, production, and R&D, bringing together multidisciplinary teams working at the forefront of precision manufacturing. The company is known for its strong technical expertise, high quality standards, and commitment to continuous improvement. Employees benefit from a modern, collaborative environment where cutting edge technology and scientific advancement are central to daily operations. Your new role You will join a high tech production environment supporting the Cameras Production team. As an Electrical Assembly Technician, you will be responsible for ensuring high quality assembly, inspection, and testing of components across Cleanroom or QC areas.Key responsibilities include: Performing incoming QC checks in line with work instructions Testing coolers and components to confirm correct specification before build Inspecting components Following engineering work instructions and basic assembly procedures Mounting components into assembly jigs with precision and care Completing assembly and test records accurately Adhering strictly to production processes and quality control standards Supporting continuous improvement activities Taking ownership of output, delivery, and quality against production targets What you'll need to succeed ONC/OND or equivalent, or GCSEs (Maths & English Grade C or above) with at least 2 years' experience in a high tech production environment Strong manual dexterity for handling small and delicate components Good written and verbal communication skills IT literacy and ability to follow digital work instructions High attention to detail and a strong commitment to quality Ability to work effectively within a structured production environment What you'll get in return Hourly rate of £14.78 Voluntary overtime opportunities. Time and half Flexi start and finish times. Experience in a precision focused, high technology production setting Contract running until September 2026 with potential extension Supportive team environment and clear work processes What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Solderer / Electronic Assembler Actio technical recruitments dedicated Electronics recruitment team are assisting one of our Poole based clients with their search for Solderers and Electronic Assemblers to join their growing and successful team. Our client are a well established contracts electronic manufacturer who provide end to end electronics manufacturing services to a number of industries. Due to continued success our client are growing their manufacturing team and so, are looking for Solderers and Assemblers of varying skill levels. The Job Working on an electronics assembly line producing high quality products, the successful candidate will assembling a wide range of products working from build instructions and drawings. You will be: Working to IPC standards Hand soldering electronic components Through hole soldering Wiring Crimping Box build First off inspection About You We are looking for candidates of all levels from those who are starting on their electronics journey through to skilled and experienced electronics technicians. Candidates should come from an electronics or production background. Salary and Benefits £+ p/h Monday to Thursday - No Fridays! What Next? For more information or to apply for this role, please contact Actio Recruitment directly or apply below. Actio are a recruitment agency and an equal oportunities employer.
Apr 20, 2026
Full time
Solderer / Electronic Assembler Actio technical recruitments dedicated Electronics recruitment team are assisting one of our Poole based clients with their search for Solderers and Electronic Assemblers to join their growing and successful team. Our client are a well established contracts electronic manufacturer who provide end to end electronics manufacturing services to a number of industries. Due to continued success our client are growing their manufacturing team and so, are looking for Solderers and Assemblers of varying skill levels. The Job Working on an electronics assembly line producing high quality products, the successful candidate will assembling a wide range of products working from build instructions and drawings. You will be: Working to IPC standards Hand soldering electronic components Through hole soldering Wiring Crimping Box build First off inspection About You We are looking for candidates of all levels from those who are starting on their electronics journey through to skilled and experienced electronics technicians. Candidates should come from an electronics or production background. Salary and Benefits £+ p/h Monday to Thursday - No Fridays! What Next? For more information or to apply for this role, please contact Actio Recruitment directly or apply below. Actio are a recruitment agency and an equal oportunities employer.
Senior Reinsurance Technician page is loaded Senior Reinsurance Technicianlocations: Londontime type: Full timeposted on: Posted 6 Days Agojob requisition id: JR147 At Antares, our success starts with our people. We're a collaborative and an inclusive organisation where every voice is valued, and every individual can grow and thrive. We combine deep expertise with a supportive culture to deliver outstanding results for our clients and a fulfilling experience for our colleagues.Whatever stage of your career you'll find a place to belong, contribute, develop and we'd love to hear from you. Key Accountabilities Provides support for the reinsurance purchasing process. Ensures reinsurance contracts are recorded in the appropriate company systems accurately, including applicable ceded financials, in a timely fashion. Capture and recording of key purchasing controls. Updating schematics and schedules Reinsurance Policy Administration for all reinsurance types Ensure all contractual conditions are met including premiums are paid and statements issued within stated timeframes. Capturing, calculation and recording of reinsurance amounts, whether proportional or non-proportional. Issuing and monitoring recoveries within reasonable timescales and meeting any loss advice obligations potentially including IBNRs for market events. Accurate and timely preparation of periodic accounts within contractual obligations. Monitoring issued premium adjustments and updating systems if necessary for reinstatement calculations. Review and calculations of cash losses, profit commissions and portfolio transfers. Applies knowledge of treaty terms and conditions to accounting transactions. Support the technical accounting process. Company reinsurance amounts Responsible for the agreement of all company reinsurance statements and their respective amounts. Payments to made within contractual obligations. Aged debt Regular monitoring of aged debt across all accounts with regular chasing. Responding to reinsurer queries in a timely fashion with the assistance of the claims, legal and underwriting teams if required. Maintain the debt chasing log recording actions taken. Erosion Analysis Quarterly review and action taken where necessary. Reinsurance returns and risk analyses Assists in the production of Group regulatory returns, liaising with internal interested parties to achieve objectives and timescales. Produces internal and external reinsurance reports when required. Assists with the production of reports and analysis to the Security Committee. Maintenance, monitoring and support of the internal risk controls. Projects Provide support, guidance and assistance for the completion of Ceded Re's projects. Takes responsibility for own and colleagues' Health & Safety at all times Statutory, personal and Company Health & Safety policy regulations are adhered to. To ensure customers are treated fairly at all times, in accordance with the Conduct Risk Policy and other relevant policies and procedures. Compliance with applicable Regulatory Requirements for QIC Global policies and procedures (Lloyd's Minimum Standards for example). Satisfactory performance as reflected in relevant Conduct Risk MI. To be aware and adhere to all obligations under GDPR, ensuring that the business complies with these requirements. To avoid breaches and to report them to the Data Protection Officer when they occur regardless of whether electronic or on paper. Adherence to QIC Global policies and procedures in relation to GDPR. Timely completion of ongoing training in relation to GDPR.Education required for this role:At Antares, we empower our talented team members through active involvement and collaboration, driving strategic and business goals whilst delivering exceptional services to our customers and partners.Our unique organisational structure fosters unparalleled sharing of information, knowledge and expertise, creating a vibrant and innovative working environment.Our culture of excellence is fuelled by continuous learning and development opportunities across all areas of our international operations. We believe in nurturing your potential and helping you grow with us. Empowerment: Be a part of decision-making processes that shape our future. Collaboration: Work with a diverse team of experts who share their knowledge and insights. Growth: Access to continuous learning and development programs to enhance your skills. Innovation: Thrive in an environment that encourages creativity and forward-thinking.Join us and be a part of a team that values your contributions and supports your professional journey. Together, we can achieve greatness!
Apr 20, 2026
Full time
Senior Reinsurance Technician page is loaded Senior Reinsurance Technicianlocations: Londontime type: Full timeposted on: Posted 6 Days Agojob requisition id: JR147 At Antares, our success starts with our people. We're a collaborative and an inclusive organisation where every voice is valued, and every individual can grow and thrive. We combine deep expertise with a supportive culture to deliver outstanding results for our clients and a fulfilling experience for our colleagues.Whatever stage of your career you'll find a place to belong, contribute, develop and we'd love to hear from you. Key Accountabilities Provides support for the reinsurance purchasing process. Ensures reinsurance contracts are recorded in the appropriate company systems accurately, including applicable ceded financials, in a timely fashion. Capture and recording of key purchasing controls. Updating schematics and schedules Reinsurance Policy Administration for all reinsurance types Ensure all contractual conditions are met including premiums are paid and statements issued within stated timeframes. Capturing, calculation and recording of reinsurance amounts, whether proportional or non-proportional. Issuing and monitoring recoveries within reasonable timescales and meeting any loss advice obligations potentially including IBNRs for market events. Accurate and timely preparation of periodic accounts within contractual obligations. Monitoring issued premium adjustments and updating systems if necessary for reinstatement calculations. Review and calculations of cash losses, profit commissions and portfolio transfers. Applies knowledge of treaty terms and conditions to accounting transactions. Support the technical accounting process. Company reinsurance amounts Responsible for the agreement of all company reinsurance statements and their respective amounts. Payments to made within contractual obligations. Aged debt Regular monitoring of aged debt across all accounts with regular chasing. Responding to reinsurer queries in a timely fashion with the assistance of the claims, legal and underwriting teams if required. Maintain the debt chasing log recording actions taken. Erosion Analysis Quarterly review and action taken where necessary. Reinsurance returns and risk analyses Assists in the production of Group regulatory returns, liaising with internal interested parties to achieve objectives and timescales. Produces internal and external reinsurance reports when required. Assists with the production of reports and analysis to the Security Committee. Maintenance, monitoring and support of the internal risk controls. Projects Provide support, guidance and assistance for the completion of Ceded Re's projects. Takes responsibility for own and colleagues' Health & Safety at all times Statutory, personal and Company Health & Safety policy regulations are adhered to. To ensure customers are treated fairly at all times, in accordance with the Conduct Risk Policy and other relevant policies and procedures. Compliance with applicable Regulatory Requirements for QIC Global policies and procedures (Lloyd's Minimum Standards for example). Satisfactory performance as reflected in relevant Conduct Risk MI. To be aware and adhere to all obligations under GDPR, ensuring that the business complies with these requirements. To avoid breaches and to report them to the Data Protection Officer when they occur regardless of whether electronic or on paper. Adherence to QIC Global policies and procedures in relation to GDPR. Timely completion of ongoing training in relation to GDPR.Education required for this role:At Antares, we empower our talented team members through active involvement and collaboration, driving strategic and business goals whilst delivering exceptional services to our customers and partners.Our unique organisational structure fosters unparalleled sharing of information, knowledge and expertise, creating a vibrant and innovative working environment.Our culture of excellence is fuelled by continuous learning and development opportunities across all areas of our international operations. We believe in nurturing your potential and helping you grow with us. Empowerment: Be a part of decision-making processes that shape our future. Collaboration: Work with a diverse team of experts who share their knowledge and insights. Growth: Access to continuous learning and development programs to enhance your skills. Innovation: Thrive in an environment that encourages creativity and forward-thinking.Join us and be a part of a team that values your contributions and supports your professional journey. Together, we can achieve greatness!
SMT Process Technician Salary: £26,500 to £32,000 depending on experience Location: On site in Huntingdon Hours: Monday to Thursday: 8:00am to 4:15pm Friday: 8:00am to 2:00pm A well established electronics manufacturing business is seeking an SMT Process Technician to support SMT and selective soldering operations within a busy production environment. The role You will support the setup, operation, and optimisation of SMT and PTH assembly processes to ensure high quality PCB builds. Key responsibilities: Setting up and operating SMT and selective soldering equipment Supporting changeovers and component loading Creating and adjusting printer, reflow, and soldering profiles for new products Supporting NPI builds and First Article Inspection Carrying out preventative maintenance and troubleshooting process faults Optimising AOI performance and improving line efficiency Working to IPC-A-610 standards and maintaining documentation Handling ESD and MSD components in line with H&S and CoSHH requirements Person specification Essential 2 to 3 years experience with SMT and or PTH selective soldering equipment Strong understanding of SMT processes and fault finding Ability to read drawings and BOMs Good IT skills and confidence with computers GCSEs in Maths, English, and Science Anyone who has worked with CNC machinery or similar Desirable IPC 7711 or 7721 certification Rework and hand soldering experience This role suits a practical, detail focused technician looking for stable on site hours and an early Friday finish. If you are interested in the role of SMT Process Technician and feel that you have the relevant experience, please contact your Recruitment Partner, Lisa Logan at Unicorn Resourcing. If this job isn't exactly right for you but you're looking for something new, please contact us for a confidential career discussion. Unicorn Resourcing Limited is acting as an Employment Agency in regard to this Permanent opportunity.
Apr 19, 2026
Full time
SMT Process Technician Salary: £26,500 to £32,000 depending on experience Location: On site in Huntingdon Hours: Monday to Thursday: 8:00am to 4:15pm Friday: 8:00am to 2:00pm A well established electronics manufacturing business is seeking an SMT Process Technician to support SMT and selective soldering operations within a busy production environment. The role You will support the setup, operation, and optimisation of SMT and PTH assembly processes to ensure high quality PCB builds. Key responsibilities: Setting up and operating SMT and selective soldering equipment Supporting changeovers and component loading Creating and adjusting printer, reflow, and soldering profiles for new products Supporting NPI builds and First Article Inspection Carrying out preventative maintenance and troubleshooting process faults Optimising AOI performance and improving line efficiency Working to IPC-A-610 standards and maintaining documentation Handling ESD and MSD components in line with H&S and CoSHH requirements Person specification Essential 2 to 3 years experience with SMT and or PTH selective soldering equipment Strong understanding of SMT processes and fault finding Ability to read drawings and BOMs Good IT skills and confidence with computers GCSEs in Maths, English, and Science Anyone who has worked with CNC machinery or similar Desirable IPC 7711 or 7721 certification Rework and hand soldering experience This role suits a practical, detail focused technician looking for stable on site hours and an early Friday finish. If you are interested in the role of SMT Process Technician and feel that you have the relevant experience, please contact your Recruitment Partner, Lisa Logan at Unicorn Resourcing. If this job isn't exactly right for you but you're looking for something new, please contact us for a confidential career discussion. Unicorn Resourcing Limited is acting as an Employment Agency in regard to this Permanent opportunity.
PDI Technician / Service Technician Salary: 36,000 - 39,000 Basic (DOE) 47,000+ OTE Hours: Full-time, 45 hours per week (including weekends on a rota) Leading Brand and Main Dealership Training The Opportunity An excellent opportunity has arisen for a PDI / Service Technician to join a well-established and forward-thinking automotive group. This role is ideal for a qualified technician looking to further develop their skills within a modern workshop, with access to industry-leading training and clear career progression. Whether you're an experienced technician or looking to build on your existing knowledge, this position offers strong earning potential and long-term development within a supportive team environment. Key Responsibilities Carry out PDI inspections, servicing, and general vehicle maintenance Complete a range of mechanical work including oil services, brakes, and cambelts Perform electronic vehicle health checks (eVHCs) in line with company standards Complete warranty work and ensure accurate job card and digital reporting Support workshop efficiency by working to targets while maintaining quality Ensure all work is completed safely and in line with required processes Requirements Level 3 qualification in Light Vehicle Maintenance (IMI, City & Guilds or equivalent) Previous experience as a Service Technician / Mechanic Experience with servicing, maintenance, and basic diagnostics Strong attention to detail and ability to follow processes Good teamwork and communication skills MOT Licence advantageous (training can be provided) Full UK Driving Licence What's on Offer Competitive basic salary with achievable bonus structure 25 days annual leave plus bank holidays (increasing with service) Ongoing manufacturer training including hybrid and EV technology Clear career progression opportunities within a large automotive group Pension scheme, life assurance, and tool insurance Employee discounts and benefits platform Modern workshop with up-to-date equipment About the Employer Our client is a reputable and growing automotive group with a strong presence across the UK. They are known for investing in their people, offering continuous training, and providing long-term career development opportunities in a professional and supportive environment. Apply Now If you are a qualified technician looking to develop your career in a progressive workshop environment, apply today to be considered.
Apr 19, 2026
Full time
PDI Technician / Service Technician Salary: 36,000 - 39,000 Basic (DOE) 47,000+ OTE Hours: Full-time, 45 hours per week (including weekends on a rota) Leading Brand and Main Dealership Training The Opportunity An excellent opportunity has arisen for a PDI / Service Technician to join a well-established and forward-thinking automotive group. This role is ideal for a qualified technician looking to further develop their skills within a modern workshop, with access to industry-leading training and clear career progression. Whether you're an experienced technician or looking to build on your existing knowledge, this position offers strong earning potential and long-term development within a supportive team environment. Key Responsibilities Carry out PDI inspections, servicing, and general vehicle maintenance Complete a range of mechanical work including oil services, brakes, and cambelts Perform electronic vehicle health checks (eVHCs) in line with company standards Complete warranty work and ensure accurate job card and digital reporting Support workshop efficiency by working to targets while maintaining quality Ensure all work is completed safely and in line with required processes Requirements Level 3 qualification in Light Vehicle Maintenance (IMI, City & Guilds or equivalent) Previous experience as a Service Technician / Mechanic Experience with servicing, maintenance, and basic diagnostics Strong attention to detail and ability to follow processes Good teamwork and communication skills MOT Licence advantageous (training can be provided) Full UK Driving Licence What's on Offer Competitive basic salary with achievable bonus structure 25 days annual leave plus bank holidays (increasing with service) Ongoing manufacturer training including hybrid and EV technology Clear career progression opportunities within a large automotive group Pension scheme, life assurance, and tool insurance Employee discounts and benefits platform Modern workshop with up-to-date equipment About the Employer Our client is a reputable and growing automotive group with a strong presence across the UK. They are known for investing in their people, offering continuous training, and providing long-term career development opportunities in a professional and supportive environment. Apply Now If you are a qualified technician looking to develop your career in a progressive workshop environment, apply today to be considered.
Command Recruitment
Letchworth Garden City, Hertfordshire
Diagnostic Technician Salary: 40,000 Basic 50,000+ OTE (Uncapped) Hours: Full-time, 45 hours per week (including weekends on a rota) The Opportunity An excellent opportunity has arisen for a skilled Diagnostic Technician to join a well-established and forward-thinking automotive group. This role offers access to industry-leading training, modern workshop facilities, and clear career progression within a supportive and high-performing after-sales team. This is an ideal position for a technician looking to develop their expertise in diagnostics, including hybrid and electric vehicle technology, while maximising earning potential through a strong bonus structure. Key Responsibilities Carry out advanced diagnostics, fault finding, and complex repairs Complete warranty work and ensure all repairs meet manufacturer standards Diagnose and resolve complex mechanical and electrical issues using the latest diagnostic equipment Carry out work on hybrid and electric vehicles (where qualified) Support and mentor junior and apprentice technicians where required Ensure all work is completed efficiently, safely, and to a high standard Requirements Level 3 (or equivalent) qualification in Light Vehicle Maintenance & Repair Recognised diagnostic qualification or strong diagnostic experience Proven experience as a Diagnostic Technician or Senior Vehicle Technician Strong knowledge of modern vehicle systems, including electrical and electronic diagnostics Ability to work both independently and as part of a team Full UK Driving Licence What's on Offer Competitive basic salary with uncapped bonus potential 25 days annual leave plus bank holidays (increasing with service) Manufacturer training including hybrid and electric vehicle systems Clear career progression and ongoing development opportunities Pension scheme and life assurance Employee discounts and benefits platform Modern workshop with the latest tools and technology About the Employer Our client is a large and reputable automotive group with a strong presence across the UK. They are known for investing in their staff, providing ongoing training, and offering long-term career progression within a professional and supportive environment. Apply Now If you are an experienced Diagnostic Technician looking to take the next step in your career, apply today to be considered for this opportunity.
Apr 19, 2026
Full time
Diagnostic Technician Salary: 40,000 Basic 50,000+ OTE (Uncapped) Hours: Full-time, 45 hours per week (including weekends on a rota) The Opportunity An excellent opportunity has arisen for a skilled Diagnostic Technician to join a well-established and forward-thinking automotive group. This role offers access to industry-leading training, modern workshop facilities, and clear career progression within a supportive and high-performing after-sales team. This is an ideal position for a technician looking to develop their expertise in diagnostics, including hybrid and electric vehicle technology, while maximising earning potential through a strong bonus structure. Key Responsibilities Carry out advanced diagnostics, fault finding, and complex repairs Complete warranty work and ensure all repairs meet manufacturer standards Diagnose and resolve complex mechanical and electrical issues using the latest diagnostic equipment Carry out work on hybrid and electric vehicles (where qualified) Support and mentor junior and apprentice technicians where required Ensure all work is completed efficiently, safely, and to a high standard Requirements Level 3 (or equivalent) qualification in Light Vehicle Maintenance & Repair Recognised diagnostic qualification or strong diagnostic experience Proven experience as a Diagnostic Technician or Senior Vehicle Technician Strong knowledge of modern vehicle systems, including electrical and electronic diagnostics Ability to work both independently and as part of a team Full UK Driving Licence What's on Offer Competitive basic salary with uncapped bonus potential 25 days annual leave plus bank holidays (increasing with service) Manufacturer training including hybrid and electric vehicle systems Clear career progression and ongoing development opportunities Pension scheme and life assurance Employee discounts and benefits platform Modern workshop with the latest tools and technology About the Employer Our client is a large and reputable automotive group with a strong presence across the UK. They are known for investing in their staff, providing ongoing training, and offering long-term career progression within a professional and supportive environment. Apply Now If you are an experienced Diagnostic Technician looking to take the next step in your career, apply today to be considered for this opportunity.
Production & Test Lead Technician job available in Waterbeach, Cambridgeshire A company that develops and manufactures thermal imaging equipment is currently looking for a Production & Test Lead Technician in Waterbeach, Cambridgeshire. The company, which is ISO 9001 certified and privately owned, was founded in 1982 and retains its position at the forefront of the infrared imaging industry. What you will need to apply for the Production & Test Lead Technician job in Waterbeach, Cambridgeshire: 5 years of experience in a similar environment An engineering or relevant qualification An understanding of electronic fundamentals and fault-finding skills using test equipment e.g. oscilloscopes Soldering to 0201 Experience with electro-mechanical products The Production & Test Lead Technician job in Waterbeach, Cambridgeshire will involve leading manufacturing and test processes, ensuring the efficient production of opto-electromechanical devices. This role would be suitable for a qualified production engineer who is thorough, possesses strong attention to detail, and can use initiative to solve problems. This role will be 5 days per week on-site.
Apr 19, 2026
Full time
Production & Test Lead Technician job available in Waterbeach, Cambridgeshire A company that develops and manufactures thermal imaging equipment is currently looking for a Production & Test Lead Technician in Waterbeach, Cambridgeshire. The company, which is ISO 9001 certified and privately owned, was founded in 1982 and retains its position at the forefront of the infrared imaging industry. What you will need to apply for the Production & Test Lead Technician job in Waterbeach, Cambridgeshire: 5 years of experience in a similar environment An engineering or relevant qualification An understanding of electronic fundamentals and fault-finding skills using test equipment e.g. oscilloscopes Soldering to 0201 Experience with electro-mechanical products The Production & Test Lead Technician job in Waterbeach, Cambridgeshire will involve leading manufacturing and test processes, ensuring the efficient production of opto-electromechanical devices. This role would be suitable for a qualified production engineer who is thorough, possesses strong attention to detail, and can use initiative to solve problems. This role will be 5 days per week on-site.
