32 jobs found

Teamforce Labour are currently looking for an experienced Groundworker to start on Monday 11th May in Uxbridge. This is a long-term opportunity working on a busy site, with a focus on deep drainage works. Payment: Umbrella PAYE Role & Responsibilities Carrying out all aspects of deep drainage, including installation of pipes, manholes, and associated infrastructure Excavation and trench work in line with site specifications and safety standards Working alongside plant operators and site teams to complete groundwork packages efficiently Reading and interpreting site drawings and plans Ensuring all work is completed to a high standard and within deadlines Maintaining a clean and safe working environment in line with health & safety regulations Requirements Proven experience in deep drainage and groundwork Valid CSCS card (essential) Ability to work as part of a team and independently Good understanding of site health & safety practices CPCS/NPORS (advantageous but not essential) Equal Opportunities Statement: Teamforce Labour is an equal opportunities employer. All applications will be reviewed based solely on merit, skills and experience, regardless of age, race, gender, disability, religion, or any other protected characteristic. If you require reasonable adjustments during the application or interview process, please inform us in advance. About Us: Teamforce Labour is a trusted and accredited supplier of skilled personnel to the Energy, Rail, Infrastructure, and Construction sectors across the UK. We are committed to delivering quality and safety across all aspects of our work while supporting diverse and inclusive hiring practices.

We are currently recruiting for an experienced 360 Machine Operator to join a well-established company operating within the demolition and recycling sector. Key Responsibilities Operate a 360 excavator safely and efficiently on demolition and recycling sites. Assist with demolition activities and material handling. Sort and process demolition materials where required. Load HGVs and move materials around the site. Carry out daily plant checks and report any faults or maintenance requirements. Work closely with site supervisors and other operators to ensure projects run smoothly and safely. Follow all health, safety and environmental procedures at all times. Candidate Requirements Previous experience operating a 360 machine within demolition, construction, waste or recycling environments. Valid CPCS or NPORS 360 Excavator ticket. Strong understanding of site health and safety practices. Ability to work effectively as part of a team on busy sites. Reliable, safety-focused and able to follow site instructions. Benefits A company vehicle Workplace Pension Scheme Life assurance (2 x Salary) 28 days holiday (including bank holidays) Training & development opportunities Supportive team operating as part a family run business with free company social events Onsite parking Referral programme

We are currently recruiting for an experienced 360 Machine Operator to join a well-established company operating within the waste management and recycling sector. Key Responsibilities Operate a 360 excavator or material handler safely and efficiently within the recycling facility. Sort and process waste materials as part of the site recycling operations. Feed material into processing plant and recycling equipment. Load HGVs and move materials safely around the site. Carry out daily machine checks and report any defects or issues with plant machinery. Work closely with supervisors and other operators to meet daily production targets. Maintain clear communication with site staff and report incidents or hazards. Ensure full compliance with health, safety, and environmental procedures. Candidate Requirements Previous experience operating a 360 machine within waste, recycling, demolition, or quarry environments. Valid CPCS / NPORS or relevant plant operator tickets. Good knowledge of plant machinery and site operations. Strong awareness of health and safety regulations. Ability to work effectively as part of a team. Full UK driving licence preferred. Benefits Competitive salary starting from £14 per hour depending on experience. Workplace pension scheme. Life assurance (2x salary). 28 days holiday (including bank holidays) Training & development opportunities Supportive team operating as part a family run business with free company social events Onsite parking

Kinetic PLC are currently seeking experienced Machine Operators to join the UKs biggest FMCG manufacturing facility, based within the Bromborough area. POSITION IS PERMANENT, FOLLOWING A SUCCESSFUL INTERVIEW. The role of an machine operative is to manufacture high quality blown film / extruded film to the required customer standards whilst maintaining a safe working environment. Ensuring dedicated machines run with minimal scrap and downtime while maintaining a safe and clean work environment. RESPONSIBILITIES HEALTH & SAFETY Manage Health & Safety requirements in accordance to the Company's policy. Promotion/awareness of the company H&S Policy. Contribute in the improvement of H&S systems and practices within the department. To attend H&S training courses to develop personal knowledge and skills. Assisting management with updating Safe Working Procedures. Identify and report any machine defects/problems to the Shift Manager / Team Leader or the Engineering Manager. PRODUCTION/QUALITY/ CONTINUOUS IMPROVEMENT Ensure the department is clean, tidy and safe at all times Communicate with the Team Leader to ensure all changeovers are planned and to ensure all labour is provided to execute the changeovers with regards to SMED. Complete job documentation as and when required. Ensure all kags are always fully loaded and dosing in to blends where applicable. Ensure all Operators are working safely and wearing all required PPE when needed. Take responsibility for ensuring customer orders are set up to specification. Operate all machinery within the department, including inline recycling machines. OPERATOR TRAINING AND DEVELOPMENT Liaise with the Team Leader and other employees at all levels to identify and assess training / schedules and development needs. Attend self development training activities. Assist with any machine difficulties an operator may be having, exhibiting an open, friendly approach and showing individuals how to overcome the problems in case of recurrence. OCCASIONAL TASKS Support the Technical Team with plant / product trials You may be required to work alternative shifts as required by the company You may be required to carry out any other suitable additional duties that are commensurate with the skills, knowledge and experience of the employee SKILLS / ATTRIBUTES Experience of working within a manufacturing environment Experience of H&S issues within a manufacturing environment Experience of delivering training to personnel (1-1, on-the-job) Excellent communication and interpersonal skills Excellent organisational and administrative skills The ability to work unsupervised and be able to use own initiative Proficiency in IT -Navision, Excel, in-house computer programmes The ability to handle multiple priorities to ensure deadlines/objectives are met The ability to form excellent working relationships at all levels and respect confidentiality Reporting directly to: Extrusion Team Leader / Shift Manager. Close working relationships with Senior Production Technicians, Engineering Department, Warehouse Managers, Operations Team and Continuous Improvement Managers. Shift pattern: 4 on 4 off (2 days 2 nights) - 07:00am to 19:00pm 19:00pm to 07:00am. Salary - 29,484 per annum. Starting salary is non negotiable, but all employee's are reviewed throughout the duration of their employment and this will be adjusted accordingly, although they could not provide a timeframe on this. (Fortnightly pay) 2 shutdowns per year - 1 week at the end of June / 1 week at the start of July, plus the Christmas period. If you feel that you have what we need, then please do call Sophie on (phone number removed) or email your up to date CV to: (url removed). Kinetic plc is a Recruitment Consultancy with over 40 years of experience of delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications with a high degree of care, we review all submissions and will attempt to contact applicants who match the job profile. Kinetic Recruitment Services Ltd operates as an Employment Business and Recruitment Agency as defined under the Employment Agencies Act 1973. IND1

At STEM Recruitment, we are looking to recruit an experienced Plant Operative in Belfast for one of our clients. Responsibilities: The role requires a competent and experienced operator capable of safely operating large mobile plant, including a 20-tonne excavator and telehandler with a 14-metre boom, to support handling, loading, and processing activities. The Plant Operative will also assist with fixed plant operations, material movement, housekeeping, and site safety, ensuring all activities are carried out in compliance with Health & Safety and environmental regulations. The Plant Operative will play a key operational role supporting the safe and efficient processing of materials through the operation of mobile and fixed plant machinery. STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible, however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities.

Job Title: Loading Shovel / Tractor Bowser Operator Hours: Monday to Friday, 6:30am - 4:00pm Job Overview: We are currently seeking an experienced Loading Shovel / Tractor Bowser Operator to join our team at a Recycling & Landfill Depot. This is a hands-on role involving plant operation and supporting the day-to-day running of the site click apply for full job details

Astute are working on behalf of a leading operator of Energy from Waste plants to find an experienced Contract Manager to join on of their newest power stations. The Energy from Waste site in Cheshire has a capacity to process 600,000 tonnes of waste per year, generating nearly 70MW of power for the surrounding area. As a Fuels Contract Manager, you will responsible for the day to day management of click apply for full job details

A leading industrial staffing firm in the United Kingdom is seeking an experienced Press Operative in Sheffield. The role involves operating a 5600T press, conducting preventative maintenance checks, and ensuring adherence to Health and Safety protocols. Candidates should have experience in a forging environment, be team players, and demonstrate flexibility in working different roles and shifts. The position offers a competitive rate of £14.50 - £17.70 per hour for a 37.5-hour work week.

Senior Transport Planner Senior Transport Planner opportunity near Whitwell. £40,000 £45,000 salary, Monday Friday role managing heavy vehicle fleet within specialist plant and transport business. About the Client I am representing a well-established specialist operator within the plant and transport sector, delivering high-quality logistics services across multiple industries. With a strong reputation for safety, service and operational excellence, the business operates a dedicated fleet of heavy vehicles and continues to invest in its people, systems and long-term growth. Due to continued development, they are now seeking an experienced Senior Planner to strengthen their transport operation. Key Benefits of the Senior Transport Planner: Basic salary between £40,000 and £45,000 per year Monday to Friday working pattern, 8:00am to 5:00pm 25 days annual leave plus statutory bank holidays Workplace pension scheme Employee discount scheme Ongoing training and professional development Genuine internal progression opportunities Permanent position with long-term stability About the Role As a Senior Transport Planner , you will take full responsibility for planning and managing an allocated pool of heavy vehicles and drivers, ensuring operational efficiency and profitability. The Senior Transport Planner will oversee fleet utilisation, trailer availability and daily workload distribution while maintaining strong working relationships with drivers and internal teams. Key responsibilities include: Planning and managing a dedicated fleet of heavy vehicles Maximising vehicle utilisation and operational efficiency Maintaining close communication with allocated drivers Coordinating vehicle inspections and driver leave with operations Working alongside the wider planning team to ensure full job coverage Liaising with the commercial team to ensure accurate job completion and invoicing Coaching and supporting members of the planning team to drive performance and achieve key performance indicators This Senior Planner position is fully site-based near Whitwell and offers clear progression within a growing transport operation. About You To be successful as a Senior Transport Planner , you must have: Proven experience managing and planning a fleet of heavy goods vehicles Experience within a busy, multi-site transport operation Strong understanding of the transport and haulage industry The ability to build effective working relationships with drivers Excellent organisational and communication skills The ability to manage multiple activities and coordinate stakeholders effectively CPC qualification is required. Coaching or mentoring qualifications would be advantageous but are not essential. To be successful in this role, you may have worked as a: Transport Planning Manager, Senior Transport Planner, Fleet Planning Manager, Transport Operations Planner, Logistics Planning Manager, Transport Supervisor, Fleet Operations Planner, Distribution Planning Manager, Traffic Manager, Haulage Planning Manager Next Steps If you are an experienced Senior Transport Planner looking for a Monday to Friday leadership opportunity near Whitwell, I would welcome a confidential conversation. Apply today to be considered for this Senior Transport Planner opportunity.

Production Supervisor Up to 45,000 + company pension & employee benefits Hereford 12 month fixed term contract Are you an experienced Production Supervisor on the look out for a new challenge with a leading manufacturer in Hereford? Does the thought of working for a successful, international firm that can offer excellent job satisfaction and great variety appeal to you? If so, we'd like to hear from you. We are currently recruiting for a Production Supervisor to join an employer of choice in Hereford for a 12 month fixed term contract. This is a great opportunity if you enjoy leading teams in a heavy industry environment. As Production Supervisor you will: - Be responsible for HSE compliance, including section specific Zero Harm Boards and Risk Reduction activities. - Support a Zero Defects Programs, including process control, standard work and reduced variation for plant. - Be responsible for performance to of your team on a daily basis - Look after staffing levels, flexibility, training and absence management and overtime to support the weekly production plan. - Lead, motivate and engage with Team Leaders and Production Operators through effective communication e.g., team briefings, regular interaction on the shop floor, involvement in Zero Harm and Zero Defects teams. - Be accountable for ensuring the daily plan is adhered to, and achieved by the production team. - Support management responsibilities including recruiting, and training employees; planning, directing work; evaluating and appraising individual performance; rewarding and disciplining employees; addressing complaints and resolving problems. - Be responsible for flexibility of the workforce to address skills gaps and create an adaptable workforce and will be responsible for Training Needs Analysis for the team. - Support use of Process Improvement and Lean Manufacturing Tools such as SPC, FMEAs, 6S and Lean Sigma structured problem-solving techniques to drive improvements. - Be an area owner for 6S and attend weekly meetings communicate updates to all members of Operations team. This is a fixed term contract role of 12 months. Not only will you benefit from a competitive salary but the working hours are convenient day shifts ( Monday - Friday ) and you will be able to take advantage of excellent ongoing training and development over the 12 month period. For immediate consideration, please forward your CV to Alex at Vibe Recruit today. Vibe Recruit is acting as an Employment Business in relation to this vacancy.

We are seeking an experienced Principal Pipeline Engineer to join a growing Energy Transition team , supporting the design and delivery of low-carbon infrastructure projects across the UK. This is a key technical leadership role, responsible for developing and overseeing pipeline and mechanical engineering solutions across a diverse portfolio of transmission projects, including natural gas, hydrogen, carbon dioxide, and wider energy transition systems. You will be part of a multidisciplinary engineering environment, contributing across the full project lifecycle-from concept and FEED through to detailed design, construction, operation, and decommissioning. Key Responsibilities Lead the development of pipeline and mechanical engineering designs across low-carbon transmission projects Deliver engineering solutions across feasibility, concept, FEED, value engineering, and detailed design stages Produce key technicaldeliverables including: Pipeline and AGI design packages Wall thickness calculations Piping specifications and routing studies Undertake pipeline routing studies , population density assessments, and high-pressure pipeline diversion design Collaborate with multidisciplinary engineering teams to develop integrated design solutions Support development of 3D models and plant layouts Provide technical leadership within the pipeline and layout discipline Contribute to proposals, bids, and multi-disciplinary project submissions Ensure engineering solutions are safe, cost-effective, and aligned with industry standards Required Skills & Experience Degree in a relevant engineering discipline Chartered Engineer status (or working towards IEng/CEng) with a relevant professional institution Strong understanding of IGEM/TD/1, TD/13 , and gas network operator standards Extensive experience in pipeline and AGI design, including routing and high-pressure systems Strong knowledge of national and international pipeline and piping design codes and standards Experience working within multidisciplinary engineering environments and contributing to 3D plant models Strong understanding of engineering design processes, calculations, and scope development Experience resolving operational and integrity-related engineering issues Proficiency inAutodesk software, including: AutoCAD AutoCAD Plant 3D Navisworks BIM 360 Strong MS Office capability for technical reporting, specifications, and engineering documentation Experience working with clients, contractors, and stakeholders with varying technical and commercial requirements Knowledge of ASME codes (desirable) Project Scope Projects will span a range of energy transition and low-carbon infrastructure developments , including: Natural gas transmission (below and above 7 bar) Hydrogen pipeline systems Carbon dioxide transport infrastructure Future fuels and carbon capture systems The role also includes exposure to early-stage and first-of-a-kind technologies within the evolving energy transition sector. Additional Information Remote working with periodic travel to key UK office locations Collaborative, multidisciplinary engineering environment Opportunity to work on nationally significant energy transition projects High technical ownership and leadership responsibility within pipeline engineering discipline Summary This is an excellent opportunity for a senior pipeline engineering professional to take a leading role in shaping low-carbon infrastructure projects that will define the future of the UK energy system.

Job Description Job Title: Test Facility Engineer - Submarines Working Pattern: Days Working location: Derby (Raynesway) Onsite As a Facility Engineer, you'll have the unique opportunity to become a part of the development of the next generation of nuclear propulsion plant and the possibility to train to become a Reactor Operator with the only experimental nuclear reactor in the UK. The successful candidate will join the small and experienced Neptune Facility Engineering Team responsible for the safe maintenance, availability and operation of a nuclear test reactor and associated facilities located on a Nuclear Licensed Site. The successful applicant will also provide significant support to an ongoing refurbishment of the existing facilities as part of a site-wide regeneration programme. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer: We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. What you will be doing: With this exciting opportunity you will get a chance to be involved with the following: Planned preventative inspection and maintenance, fault diagnosis and repair of instrumentation and control systems, interlock and safety systems, ventilations systems, emergency shutdown systems and power systems (including all associated mechanical interfaces). Calibrations of field equipment such as resistance thermometers and thermocouples. Mechanical and electrical isolations following company Lockout-Tagout procedure. Generating, implementing, and reviewing Safe Systems of Work (SSoW) such as risk/COSHH/PUWER assessments. Supporting experimental test programmes by working in radiologically controlled contamination and radiation areas, handling fissile material, and operating the reactor plant. Supervision of contractors and reviewing supporting documentation in accordance with company control of contractor process. Acting as a Modification Controller ensuring adherence to the company modification control process from requirements capture to initial and detailed designs, through to implementation and commissioning (including all drawing and documentation updates as required). Supporting the onsite Emergency Response Organisation, such as training to become a member of the Intervention Team trained in casualty evacuation, use of breathing apparatus, basic fire-fighting and basic first aid. Who we're looking for: At Rolls-Royce we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. To be successful in this role you will need to meet the following criteria: Qualified with an HNC/HND/Degree in an Engineering discipline. Time-served maintenance/manufacturing services background. Comfortable using mechanical and electrical design information to aid maintenance, fault finding and system modifications (such as design baseline documents, P&IDs, wiring diagrams etc.) Experience writing and reviewing SSoW. Experience supervising contractors and reviewing their SSoW. Good understanding of HSE regulations. Proficient in the use of Microsoft Word, Excel and PowerPoint. Good communication and presentation, able to work in a multidisciplinary environment, and adept at positively engaging with and influencing stakeholders. Strong time management skills and an ability to work under pressure, remain agile, deliver the right results safely and on time. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce To work for Rolls-Royce Submarines, you need to hold a Security Check (SC) clearance without any caveats to that clearance. Rolls-Royce will support the application for Security Clearance if you don't currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets, you must hold a UK nationality. Any dual nationals will require additional scrutiny and background checks prior to commencing work with RRSL. Closing date:13/10/2025 Job Category Validation and Verification Posting Date 29 Sept 2025; 00:09 Posting End Date 13 Oct 2025PandoLogic.

Job role: CNC Machinist Salary: £30,000-£33,700 DOE Location: Kettering, Northamptonshire Hours: 07:30-16:15 Monday to Thursday, 12:00 finish Fridays Job Type: Full Time, Permanent The Company: Interaction Technical have partnered with a well established precision engineering company based in Kettering on their search for an experienced and skilled CNC Machinist to join their team. Our client has been established for well over 60 years, sub-contracting the production of components for an array of industries and they are now looking to add to the team on the shop floor. If you are an experience CNC Machinist looking for a new opportunity in Northamptonshire, please click apply now! The Benefits: £30,000-£33,700 salary dependent on experience Overtime available 33 days including bank holidays Company Pension Scheme Life assurance On-site parking Clean working environment The Role: Set and operate an array of CNC and Manual machinery ensuring all work is completed effectively and efficiently. Produce small, complex batches of components to quality standards and tight tolerances. Program online (G Codes) on the plant machinery where required. Ability to work with manual milling machinery where required. Adhere to strict company Health & Safety policies. Read and interpret engineering specifications and drawings to ensure that components are machined correctly. The Requirements: Minimum 3 years experience as a CNC/Manual machinist working to tight tolerances (essential) Proven experience and knowledge of Fanuc G codes and online programming (essential) Apprentice Trained with qualifications relevant to the precision engineering industry (advantageous) previous experience working on manual machinery (advantageous) Full UK Driving Licence Interaction Recruitment have specialist consultants across the majority of industries within the UK, including but not limited to, Finance & IT, Technical & Engineering, Industrial, Commercial and Hospitality. We offer both temporary and permanent support. For more information regarding the position or to discuss any other opportunities, you can reach Julius on (url removed) or (phone number removed). Thank you for taking the time, we hope to speak in the near future. Similar Roles: CNC Turner, CNC Programmer, CNC Setter, CNC Operator, CNC Miller, Turner, Miller, CNC, Manual Miller, Manual Turner, CMM, CNC Machinist INDTE

Business Development Manager - Industrial Engineering Sector Full-Time UK-Based Field & Office-Based Hybrid Intro A leading UK manufacturer of specialist materials and components is expanding its commercial team and looking for an experienced Business Development Manager . This is a strategic role focused on driving growth through client engagement, technical sales, and market expansion within heavy-wear industries. What to Expect As a Business Development Manager, you'll be responsible for developing and managing relationships with both new and existing clients across sectors such as mining, quarrying, cement, and energy. Your core focus will be promoting engineered abrasion-resistant solutions, from fabricated parts to complete refurbishment services. The role combines both technical consultation and commercial strategy, with full support from internal technical and production teams. Key responsibilities include: Developing and executing growth strategies across new and existing markets Presenting technical product solutions to engineers and decision-makers Expanding reverse engineering and refurbishment offerings to plant operators Managing the full sales lifecycle: from lead generation and quoting to closing and aftersales Collaborating with internal teams to deliver customised solutions and forecasts Regular UK-wide client visits with some flexibility for remote/home-based working What We Need From You Proven track record in B2B sales, ideally in engineered or abrasion-resistant materials A solid understanding of fabrication, wear plate, or chrome carbide products is highly advantageous Strong technical background and ability to understand client requirements Excellent relationship-building skills and ability to influence technical buyers A creative and strategic mindset for market development Self-motivated, target-driven, and comfortable working independently Excellent time management and organisational skills What We Can Offer 50,000 base salary plus a lucrative commission and bonus structure Company vehicle or generous car allowance Comprehensive, ongoing training in product and technical expertise Autonomy and flexibility to manage your own territory Long-term career prospects with a growing UK-based manufacturer Supportive leadership team and a well-established customer base ready for you to build on If this role would be of interest, apply below!

The role is for an experienced CNC programmer / operator with experience of running a 3 axis, Fanuc controlled CNC machine and using Alphacam software or similar to set and run programmes. Key skills and experience Able to work a rotating weekly Days/ Noon s/ Nights shift pattern Monday to Friday. Worked within a production / factory environment programming, setting and operating a CNC machine which requires manual tasks adhering to Health and safety rules and procedures. Can follow standard process procedures and is able to document information in a written and numerical way. Forklift truck license and operation experience would be an advantage. The Role To ensure the safe and efficient operation of all plant and equipment directly and indirectly associated with production. To ensure that all process and quality documents and procedures are followed at all times and that any issues are raised with a manager or relevant department as required. To reduce product loss and waste at every opportunity through good manufacturing practices. To make sure that shift handovers are conducted in a structured and informative way that ensures all areas of the plant are handed over in good and tidy order. Information re product in process and where we are on plan is discussed along with any other relevant information. Housekeeping on a clean as you go basis is maintained throughout the shift and in line with handover process. Any observed issues or improvements are communicated correctly. I.e. maintenance issues logged in the shift handover book or reported to a manger if convenient. Opening up and locking up of site as required dependant on shift. Working as part of a wider production team to ensure all operators are working in a safe and supported way. To assume responsibility for any in process change over procedures including but not limited to the following: Filling out paperwork and process information. QC checks. Machine set up /operation and product changeovers. The role is primarily CNC Production Operating however, as part of a small production team there may be times when you may jump in to help on another process within the Production line which will add a little variety every now and then. For more information please forward your CV ideally with covering paragraph or two on why you feel this could be the ideal role for you.

A new and exciting opportunity is available with my client who are now looking for Electrical Service Technician to join their Service Team. Their ideal candidate will have 17th / 18th edition, with proven qualification or apprenticeship training within an electrical engineering discipline as well as knowledge of PLC s, motor circuits, sensor and measurement devices and associated equipment. Electrical Service Technician role: The successful Electrical Service Technician will report to the Regional Field Manager, be part of a small team responsible for asset inspection, troubleshooting, servicing and commissioning and assisting with installations of my client s equipment. You ll be responsible for: • Optimising the performance of new installation equipment and existing assets as part of continuing new product provision and service and support to end users. • Make sure that all installations and serviced equipment represent good reference sites. • Final testing and commissioning of installations in relation to new and existing equipment. • Service work on equipment and ancillary equipment including works on control systems. • Site visits to undertake inspections on products for mechanical and electrical asset condition reporting and electrical trouble shooting/ fault finding. • Provide operator training for the end users of my clients products. • Provide technical support to customers and other departments. • Make sure that projects provide effective solutions for customers. Electrical Service Technician requirement: Experienced and qualified Electrical Technician/Electrician educated to NVQ Level 3 level or equivalent. Can work from mechanical and electrical engineering drawings ideally from an electrical engineering service or a plant/production maintenance background. Knowledge of three-phase low voltage motor control panels and PLCs Qualified to 18th or 17th Edition. Willing to assist Mechanical Technicians when required. Predominately site work in Southern UK and a company van will be provided for travel. Occasional work in other parts of the UK. UK driving license. Excellent customer facing experience. Electrical Service Technician package: Salary base of £38k - £44.5k (OTE circa £50k) Overtime, Paid door to door, Company van for work use only, Company bonus (annually), Private health after probation period, death in service 3x salary, Sick bonus, Attractive company pension, 23 days holiday + bank hols (increasing 1 day per annum to max of 33 days).