Job Title: Machine Minder / Operator / Feeder Location: Aldridge Walsall Full-time, 4 on 4 off 12 hour shifts 6am-6pm Pay: 13.50ph We're recruiting reliable, hands-on Machine Minders to operate and feed production equipment in a building products manufacturing environment. This is a practical role focused on safe, consistent machine operation, quality output and supporting continuous production. Key responsibilities (day-to-day operational steps) Pre-shift: carry out and record machine start-up and safety checks (visual inspection, guarding, lubrication points, control panel checks). Set-up & start: prepare machines for the run (fitting basic tooling/guides, loading settings/SOPs), confirm correct materials and parameters. Feeding & operation: continuously feed raw materials/products to maintain steady flow, monitor machine performance and output rates, make minor adjustments within SOP limits to maintain quality. Quality checks: take samples at defined intervals, perform basic measurements/visual inspections, label/reject non-conforming product and record results. Fault response: identify and isolate common issues, perform basic troubleshooting and minor adjustments; log faults and escalate complex or safety-related issues to engineering/maintenance immediately. Changeovers & cleaning: assist with safe changeovers and end-of-shift cleaning; follow 5S and housekeeping standards to maintain a safe, efficient workspace. Health & Safety & compliance: follow all company safety, environmental and quality procedures (PPE, lockout/tagout, COSHH where applicable). Records & communication: complete production logs, shift handovers and material consumption records; highlight production or quality trends to supervisors. Support continuous improvement: suggest practical improvements to reduce waste, improve uptime and increase efficiency. Essential skills & experience Previous experience operating industrial machinery in a continuous manufacturing environment preferred. Comfortable with physically demanding work (manual handling, standing for long periods). Ability to follow written procedures and SOPs accurately. Basic numeracy and the ability to take and record simple measurements. Good observational skills, problem awareness and the ability to escalate appropriately. Reliable, punctual and a team player with good communication skills. Desirable Machine operating, minding, feeding Basic machine fault finding Basic machine maintenance What we offer Competitive pay and shift supplement Training on equipment, procedures and safety systems A supportive team focused on safety, quality and continuous improvement To apply: please submit CV Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Apr 25, 2026
Full time
Job Title: Machine Minder / Operator / Feeder Location: Aldridge Walsall Full-time, 4 on 4 off 12 hour shifts 6am-6pm Pay: 13.50ph We're recruiting reliable, hands-on Machine Minders to operate and feed production equipment in a building products manufacturing environment. This is a practical role focused on safe, consistent machine operation, quality output and supporting continuous production. Key responsibilities (day-to-day operational steps) Pre-shift: carry out and record machine start-up and safety checks (visual inspection, guarding, lubrication points, control panel checks). Set-up & start: prepare machines for the run (fitting basic tooling/guides, loading settings/SOPs), confirm correct materials and parameters. Feeding & operation: continuously feed raw materials/products to maintain steady flow, monitor machine performance and output rates, make minor adjustments within SOP limits to maintain quality. Quality checks: take samples at defined intervals, perform basic measurements/visual inspections, label/reject non-conforming product and record results. Fault response: identify and isolate common issues, perform basic troubleshooting and minor adjustments; log faults and escalate complex or safety-related issues to engineering/maintenance immediately. Changeovers & cleaning: assist with safe changeovers and end-of-shift cleaning; follow 5S and housekeeping standards to maintain a safe, efficient workspace. Health & Safety & compliance: follow all company safety, environmental and quality procedures (PPE, lockout/tagout, COSHH where applicable). Records & communication: complete production logs, shift handovers and material consumption records; highlight production or quality trends to supervisors. Support continuous improvement: suggest practical improvements to reduce waste, improve uptime and increase efficiency. Essential skills & experience Previous experience operating industrial machinery in a continuous manufacturing environment preferred. Comfortable with physically demanding work (manual handling, standing for long periods). Ability to follow written procedures and SOPs accurately. Basic numeracy and the ability to take and record simple measurements. Good observational skills, problem awareness and the ability to escalate appropriately. Reliable, punctual and a team player with good communication skills. Desirable Machine operating, minding, feeding Basic machine fault finding Basic machine maintenance What we offer Competitive pay and shift supplement Training on equipment, procedures and safety systems A supportive team focused on safety, quality and continuous improvement To apply: please submit CV Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.
Job Title: CNC Miller Setter/Operator Location: Newport, UK Salary: 30,000 - 38,000 per year (depending on experience) Shift: Day Shift Benefits: Permanent Position Free Onsite Parking Career development opportunities The Company: A precision engineering business is establishing a new manufacturing facility in Newport and is seeking a skilled Machinist to join as part of the initial team. This is an opportunity to contribute to the setup and development of a high-quality machining operation, working with precision components and supporting the implementation of robust manufacturing processes. The CNC Miller Setter/Operator Role: This role is primarily focused on CNC milling, with additional responsibilities across lapping, grinding, and precision finishing. The successful candidate will be expected to adopt a flexible approach, supporting multiple areas of the machining process as required. Full training will be provided to develop capability across these disciplines. This is an excellent opportunity to broaden your skill set while contributing to the setup and development of a high-quality machining operation. Key Responsibilities Machining & Finishing Operate CNC milling machines in line with engineering drawings and specifications Perform precision lapping and grinding operations to achieve required surface finishes and tolerances Set up and operate surface grinders and finishing equipment Select appropriate tooling, abrasives, fixtures, and machining parameters Deburr, clean, and prepare components for further processing Measurement & Quality Control Interpret engineering drawings, GD&T, and technical specifications Use precision measurement tools (micrometers, bore gauges, height gauges, CMM, surface testers) Carry out in-process and final inspections Record and document measurements in line with quality standards Process & Continuous Improvement Support the setup and optimisation of machining processes Maintain machines, tooling, and work areas to a high standard Identify opportunities to improve efficiency, quality, and process stability Collaborate with engineering and production teams Follow all health & safety procedures About You: Proven experience in CNC milling, lapping, or grinding Strong understanding of machining principles, feeds and speeds Ability to read and interpret engineering drawings and GD&T Skilled in precision measurement and inspection techniques High attention to detail and quality standards Ability to work independently in a fast-paced environment How to Apply: To apply for the CNC Miller Setter/Operator position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps.
Apr 25, 2026
Full time
Job Title: CNC Miller Setter/Operator Location: Newport, UK Salary: 30,000 - 38,000 per year (depending on experience) Shift: Day Shift Benefits: Permanent Position Free Onsite Parking Career development opportunities The Company: A precision engineering business is establishing a new manufacturing facility in Newport and is seeking a skilled Machinist to join as part of the initial team. This is an opportunity to contribute to the setup and development of a high-quality machining operation, working with precision components and supporting the implementation of robust manufacturing processes. The CNC Miller Setter/Operator Role: This role is primarily focused on CNC milling, with additional responsibilities across lapping, grinding, and precision finishing. The successful candidate will be expected to adopt a flexible approach, supporting multiple areas of the machining process as required. Full training will be provided to develop capability across these disciplines. This is an excellent opportunity to broaden your skill set while contributing to the setup and development of a high-quality machining operation. Key Responsibilities Machining & Finishing Operate CNC milling machines in line with engineering drawings and specifications Perform precision lapping and grinding operations to achieve required surface finishes and tolerances Set up and operate surface grinders and finishing equipment Select appropriate tooling, abrasives, fixtures, and machining parameters Deburr, clean, and prepare components for further processing Measurement & Quality Control Interpret engineering drawings, GD&T, and technical specifications Use precision measurement tools (micrometers, bore gauges, height gauges, CMM, surface testers) Carry out in-process and final inspections Record and document measurements in line with quality standards Process & Continuous Improvement Support the setup and optimisation of machining processes Maintain machines, tooling, and work areas to a high standard Identify opportunities to improve efficiency, quality, and process stability Collaborate with engineering and production teams Follow all health & safety procedures About You: Proven experience in CNC milling, lapping, or grinding Strong understanding of machining principles, feeds and speeds Ability to read and interpret engineering drawings and GD&T Skilled in precision measurement and inspection techniques High attention to detail and quality standards Ability to work independently in a fast-paced environment How to Apply: To apply for the CNC Miller Setter/Operator position, click Apply Now and upload your CV. A member of our recruitment team will contact you to discuss your application and next steps.
A Business Development Manager is sought to join a specialist engineering organisation, supporting growth across the UK and Europe in a remote, UK-wide role (Head office based Saffron Walden, Cambridgeshire). The Business Development Manager, UK(remote), will be expected to drive new business growth within a highly technical, solution-led environment, focusing on custom hermetic sealing solutions for mission-critical applications. This is a pure "hunter" role, requiring proactive pipeline generation, consultative selling, and engagement with engineering stakeholders across multiple industries. Responsibilities include: Identify, target, and win new business opportunities across the UK and Europe. Develop and execute a proactive business development strategy to grow revenue. Build and manage a strong pipeline of qualified opportunities through self-generated leads. Engage with engineers, technical teams, and decision-makers to understand application requirements. Deliver consultative, solution-based sales for bespoke engineering products. Present technical solutions and proposals to customers, articulating value and differentiation. Manage early-stage project scoping before handing over to internal engineering teams. Build long-term relationships with key stakeholders across target industries. Support the development of future distributor and representative networks across Europe. Travel across the UK and Europe to meet customers and attend industry events. Key skills & experience: Proven experience in a business development or technical sales role within engineering or manufacturing. Strong "hunter" mentality with the ability to generate and convert new business opportunities. Experience selling technical, custom, or engineered solutions (rather than catalogue products). Strong understanding of engineering principles (e.G., Mechanical, materials science, or electronics concepts). Excellent communication and questioning skills with the ability to engage technical stakeholders. Experience working with long sales cycles and complex, consultative sales processes. Self-motivated, proactive, and comfortable working in a remote, field-based role. Willingness to travel regularly across the UK and Europe. Salary & benefits: Basic salary circa 60,000 (flexible depending on experience). Annual bonus based on performance and pipeline progression. Company car or car allowance. Laptop, phone, and travel expenses covered. Hotel accommodation provided for initial training in Saffron Walden. How to apply: Apply now for the Business Development Manager role (UK remote). Send your CV to (url removed) or call Adam on (phone number removed)
Apr 25, 2026
Full time
A Business Development Manager is sought to join a specialist engineering organisation, supporting growth across the UK and Europe in a remote, UK-wide role (Head office based Saffron Walden, Cambridgeshire). The Business Development Manager, UK(remote), will be expected to drive new business growth within a highly technical, solution-led environment, focusing on custom hermetic sealing solutions for mission-critical applications. This is a pure "hunter" role, requiring proactive pipeline generation, consultative selling, and engagement with engineering stakeholders across multiple industries. Responsibilities include: Identify, target, and win new business opportunities across the UK and Europe. Develop and execute a proactive business development strategy to grow revenue. Build and manage a strong pipeline of qualified opportunities through self-generated leads. Engage with engineers, technical teams, and decision-makers to understand application requirements. Deliver consultative, solution-based sales for bespoke engineering products. Present technical solutions and proposals to customers, articulating value and differentiation. Manage early-stage project scoping before handing over to internal engineering teams. Build long-term relationships with key stakeholders across target industries. Support the development of future distributor and representative networks across Europe. Travel across the UK and Europe to meet customers and attend industry events. Key skills & experience: Proven experience in a business development or technical sales role within engineering or manufacturing. Strong "hunter" mentality with the ability to generate and convert new business opportunities. Experience selling technical, custom, or engineered solutions (rather than catalogue products). Strong understanding of engineering principles (e.G., Mechanical, materials science, or electronics concepts). Excellent communication and questioning skills with the ability to engage technical stakeholders. Experience working with long sales cycles and complex, consultative sales processes. Self-motivated, proactive, and comfortable working in a remote, field-based role. Willingness to travel regularly across the UK and Europe. Salary & benefits: Basic salary circa 60,000 (flexible depending on experience). Annual bonus based on performance and pipeline progression. Company car or car allowance. Laptop, phone, and travel expenses covered. Hotel accommodation provided for initial training in Saffron Walden. How to apply: Apply now for the Business Development Manager role (UK remote). Send your CV to (url removed) or call Adam on (phone number removed)
Maintenance Engineer 40p/h Days / Nights Location: Flint gap technical are proud to be representing a market-leading manufacturing business in their search for an experienced Maintenance Engineer (Electrical Bias) to support operations at their site near Flint The Role Reporting to the Engineering Manager, you will play a key role in supporting the manufacturing process by responding to breakdowns, carrying out planned maintenance, and driving continuous improvement across the site. Key Responsibilities Respond promptly and effectively to equipment breakdowns, ensuring minimal downtime Carry out planned and preventative maintenance activities Fault-find efficiently using machine history, documentation, and diagnostics Take ownership of a nominated production area Identify, correct, and modify recurring machine faults Work closely with production teams to maintain strong working relationships Train operational staff in minor maintenance tasks and assist with major repairs Ensure all machinery is maintained to a high engineering standard Actively contribute to reducing downtime and improving engineering processes About You Time-served Electrical engineering apprenticeship (preferred) Electrical bias with strong hands-on experience Proven experience with: 3 Phase Electrical Systems Motors, Drives, Safety Relays & PLC'S Packaging machinery Background in FMCG / Print / Packaging manufacturing is advantageous but not essential Strong communication skills with the ability to plan and organise workload effectively Flexible approach to shift patterns (days, nights, weekends) What's on Offer Opportunity to work with a market-leading manufacturing business Varied and challenging role in a fast-paced environment Apply Please send your CV via the Apply Now option on the website. If you have any questions about this role or would like to discuss other opportunities, please don't hesitate to get in touch. This vacancy is being advertised on behalf of gap technical, who are operating as an employment business. gap technical are committed to the selection, recruitment, and development of the best people, basing judgments solely on suitability for the role. Closing Date: 27/04/2026
Apr 25, 2026
Contractor
Maintenance Engineer 40p/h Days / Nights Location: Flint gap technical are proud to be representing a market-leading manufacturing business in their search for an experienced Maintenance Engineer (Electrical Bias) to support operations at their site near Flint The Role Reporting to the Engineering Manager, you will play a key role in supporting the manufacturing process by responding to breakdowns, carrying out planned maintenance, and driving continuous improvement across the site. Key Responsibilities Respond promptly and effectively to equipment breakdowns, ensuring minimal downtime Carry out planned and preventative maintenance activities Fault-find efficiently using machine history, documentation, and diagnostics Take ownership of a nominated production area Identify, correct, and modify recurring machine faults Work closely with production teams to maintain strong working relationships Train operational staff in minor maintenance tasks and assist with major repairs Ensure all machinery is maintained to a high engineering standard Actively contribute to reducing downtime and improving engineering processes About You Time-served Electrical engineering apprenticeship (preferred) Electrical bias with strong hands-on experience Proven experience with: 3 Phase Electrical Systems Motors, Drives, Safety Relays & PLC'S Packaging machinery Background in FMCG / Print / Packaging manufacturing is advantageous but not essential Strong communication skills with the ability to plan and organise workload effectively Flexible approach to shift patterns (days, nights, weekends) What's on Offer Opportunity to work with a market-leading manufacturing business Varied and challenging role in a fast-paced environment Apply Please send your CV via the Apply Now option on the website. If you have any questions about this role or would like to discuss other opportunities, please don't hesitate to get in touch. This vacancy is being advertised on behalf of gap technical, who are operating as an employment business. gap technical are committed to the selection, recruitment, and development of the best people, basing judgments solely on suitability for the role. Closing Date: 27/04/2026
I am looking to speak with Production Managers, Operations Shift Managers, Operations/Factory Managers that could operate on a shift based role. We are currently supporting a well established, multi-site food manufacturer who are looking for an Operations Manager to join the team, the role is a 4 on 4 off days shift pattern. This role will be responsible for a factory running with efficient processes and stable teams, with circa 100 headcount, overseeing Operations and working closely with the Engineering and Technical Management. You will be responsible for delivering site objectives, business performance and leadership to direct and maximise site potential. To be successful in this role you can be an Operations/Factory Manager or Senior Production Manager/Manufacturing Manager looking for a step up into a leadership position. Ideally a background in fast paced, chilled food manufacturing, overseeing and directing teams of 80-100 reports, strong communication ability on site and group levels. If you feel you match the above criteria and wish to apply for this great opportunity, please contact Sam on (phone number removed) or send your CV to (url removed) directly. As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)
Apr 25, 2026
Full time
I am looking to speak with Production Managers, Operations Shift Managers, Operations/Factory Managers that could operate on a shift based role. We are currently supporting a well established, multi-site food manufacturer who are looking for an Operations Manager to join the team, the role is a 4 on 4 off days shift pattern. This role will be responsible for a factory running with efficient processes and stable teams, with circa 100 headcount, overseeing Operations and working closely with the Engineering and Technical Management. You will be responsible for delivering site objectives, business performance and leadership to direct and maximise site potential. To be successful in this role you can be an Operations/Factory Manager or Senior Production Manager/Manufacturing Manager looking for a step up into a leadership position. Ideally a background in fast paced, chilled food manufacturing, overseeing and directing teams of 80-100 reports, strong communication ability on site and group levels. If you feel you match the above criteria and wish to apply for this great opportunity, please contact Sam on (phone number removed) or send your CV to (url removed) directly. As you know over here at Zest we like to do things properly and always want to keep you, the candidate in the loop. Applying to this 'one of a kind' role you give Zest permission to hold your information. If you want to know more about how Zest look after your personal information please visit our privacy policy on the website (url removed)
Night Shift Quality Control Inspector Precision Manufacturing Monday-Thursday 17:00 - 03:15 If you're someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you'll be trusted to ensure that every component leaving the facility meets exacting standards - from first-off approval through to final verification. The Role - What You'll Own This isn't just ticking boxes - you'll be a key part of safeguarding product integrity across the full manufacturing lifecycle. Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications Take responsibility for first-off inspection to keep production running efficiently and right-first-time Produce and compile First Article Inspection Reports (FAIRs) with full traceability Ensure all inspection records are accurate, complete, and audit-ready Support goods inward inspection and verify incoming components Identify, log, and escalate non-conformances in line with company procedures Work closely with production and quality engineering to resolve issues and prevent recurrence Contribute to root cause analysis and continuous improvement activity Maintain strict adherence to Quality, HSE, and compliance standards What You'll Bring We're looking for someone who combines technical capability with a proactive, quality-first mindset. Strong experience in precision inspection within a manufacturing environment Confident using a range of inspection tools, gauges, and measuring equipment , including CMM Ability to read and interpret complex engineering drawings (metric & imperial) Experience producing or supporting FAIR documentation Knowledge of quality standards and inspection processes Comfortable working independently on a night shift Desirable (but not essential) Aerospace or highly regulated industry experience Exposure to ERP/MRP systems (Javelin advantageous) Awareness of MSA, SPC, NDT, ISO/ASME standards How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy
Apr 25, 2026
Full time
Night Shift Quality Control Inspector Precision Manufacturing Monday-Thursday 17:00 - 03:15 If you're someone who takes real pride in precision and enjoys being the final checkpoint between production and perfection, this night shift QC role offers the autonomy and responsibility to make a genuine impact. Working at the heart of the inspection function, you'll be trusted to ensure that every component leaving the facility meets exacting standards - from first-off approval through to final verification. The Role - What You'll Own This isn't just ticking boxes - you'll be a key part of safeguarding product integrity across the full manufacturing lifecycle. Carry out detailed inspection of parts, assemblies, and sub-assemblies against engineering drawings and customer specifications Take responsibility for first-off inspection to keep production running efficiently and right-first-time Produce and compile First Article Inspection Reports (FAIRs) with full traceability Ensure all inspection records are accurate, complete, and audit-ready Support goods inward inspection and verify incoming components Identify, log, and escalate non-conformances in line with company procedures Work closely with production and quality engineering to resolve issues and prevent recurrence Contribute to root cause analysis and continuous improvement activity Maintain strict adherence to Quality, HSE, and compliance standards What You'll Bring We're looking for someone who combines technical capability with a proactive, quality-first mindset. Strong experience in precision inspection within a manufacturing environment Confident using a range of inspection tools, gauges, and measuring equipment , including CMM Ability to read and interpret complex engineering drawings (metric & imperial) Experience producing or supporting FAIR documentation Knowledge of quality standards and inspection processes Comfortable working independently on a night shift Desirable (but not essential) Aerospace or highly regulated industry experience Exposure to ERP/MRP systems (Javelin advantageous) Awareness of MSA, SPC, NDT, ISO/ASME standards How to Apply To apply for this exclusive opportunity, please submit an up-to-date CV by clicking the Apply button, or contact me directly for a confidential discussion. If you have not been contacted by A1 Personnel within two weeks of submitting your application, please assume that your CV has not been shortlisted on this occasion. A1 Personnel is acting as a specialist recruitment consultancy in relation to this vacancy
Mechanical Fitter Salary: £33.23 p/h (umbrella rate) Hours: 40 hours per week Contract: 14 weeks (mid July) Shifts : 6:00am-2:30pm Location: Dudley About the Role: We re looking for a skilled Mechanical Fitter to carry out stripping, overhauling and rebuilding trams. You will be part of a dedicated workshop team responsible for stripping down tram components, inspecting and repairing mechanical systems, and rebuilding vehicles to a high safety and performance standard. What You ll Be Doing: Mechanical fitter work carried out on trams (light rail, Urbos 3): Interior strip down of components including removing seats, seat covers, linings, grab poles, windows, doors, and rubber seals. Bogie & underframe work, disconnection and lifting of bogies, removing pipework and associated mechanical components Assist welders as needed (cleaning paint, prep work) Mechanical Modifications including grinding, cutting off bobtails, riveting, using bobtail guns, hydraulic tools, standard hand tools. Fitting, refitting, rebuilding interior and mechanical components Measuring and working to diagrams when required Collaborating with welders and wider team What You ll Need: Strong mechanical fitter background essential Must be comfortable in a refurbishment/modification environment Experience with grinding, hand tools, mechanical strip & rebuild Experience working in dusty, dirty, noisy environments Apply today and join a team that keeps the tram network running safely, smoothly, and reliably. About Ford & Stanley group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
Apr 25, 2026
Contractor
Mechanical Fitter Salary: £33.23 p/h (umbrella rate) Hours: 40 hours per week Contract: 14 weeks (mid July) Shifts : 6:00am-2:30pm Location: Dudley About the Role: We re looking for a skilled Mechanical Fitter to carry out stripping, overhauling and rebuilding trams. You will be part of a dedicated workshop team responsible for stripping down tram components, inspecting and repairing mechanical systems, and rebuilding vehicles to a high safety and performance standard. What You ll Be Doing: Mechanical fitter work carried out on trams (light rail, Urbos 3): Interior strip down of components including removing seats, seat covers, linings, grab poles, windows, doors, and rubber seals. Bogie & underframe work, disconnection and lifting of bogies, removing pipework and associated mechanical components Assist welders as needed (cleaning paint, prep work) Mechanical Modifications including grinding, cutting off bobtails, riveting, using bobtail guns, hydraulic tools, standard hand tools. Fitting, refitting, rebuilding interior and mechanical components Measuring and working to diagrams when required Collaborating with welders and wider team What You ll Need: Strong mechanical fitter background essential Must be comfortable in a refurbishment/modification environment Experience with grinding, hand tools, mechanical strip & rebuild Experience working in dusty, dirty, noisy environments Apply today and join a team that keeps the tram network running safely, smoothly, and reliably. About Ford & Stanley group Ford & Stanley Talent Services Group are in the business of people and performance. Our mission is to create one million better workdays through facilitating great recruitment, leadership and occupational mental fitness. We support our clients in their most challenging business areas - recruiting, developing and retaining the best talent from shop floor to boardroom. Ford & Stanley TalentWise - Business specialising in blue collar trade & technical services permanent and temporary. Ford & Stanley Recruitment - Business specialising in white collar spanning all company functions with specialist verticals within Digital, Rail Engineering, Civils & Infrastructure, General Manufacturing, Supply Chain & Logistics both permanent and contract. Ford & Stanley Executive Search Business specialising in Executive Search & Executive Interim Solutions in the UK, North America, Middle East and Europe. Ford & Stanley Genius Performance - Performance is always accelerated when good people are coached, inspired, trained and focused in the right way. Ford & Stanley Talent Services Group Ltd is a Disability Confident employer that is committed to a policy of equal opportunities for all opportunity seekers. We shall adhere to such a policy at all times and will review on an on-going basis all aspects of recruitment to avoid unlawful or undesirable discrimination. We will treat everyone equally irrespective sex, sexual orientation, gender reassignment, marital or civil partnership status, age, disability, colour, race, nationality, ethnic or national origin, religion or belief or political beliefs and we place an obligation upon all staff to respect and act in accordance with the policy. Services advertised by Ford & Stanley are that of an employment consultancy business.
The Shift Engineer will play a key role in maintaining and improving production equipment within the food manufacturing industry. This permanent position is based in Coventry and involves ensuring the smooth operation of engineering and manufacturing processes. Client Details A medium-sized company within the food manufacturing industry, dedicated to providing high-quality products and services. They focus on maintaining a reliable and efficient production environment within their engineering and manufacturing department. Description Carry out planned preventative maintenance on machinery and equipment. Diagnose and resolve mechanical and electrical faults efficiently. Ensure all machinery is operating at optimum performance levels. Assist with the installation and commissioning of new equipment. Maintain accurate records of maintenance and repair activities. Adhere to health and safety regulations at all times. Work collaboratively with the production team to minimise downtime. Provide technical support and guidance to colleagues as needed. 4 on 4 off (2D2N) - 12 Hours Profile You will be an experience Maintenance Engineer, ideally with experience in a manufacturing environment, along with: Relevant qualifications in engineering or a related field. Experience in mechanical and electrical maintenance. Knowledge of health and safety practices in an engineering environment. Strong problem-solving skills and attention to detail. Ability to work effectively in a fast-paced manufacturing setting. Excellent communication and teamwork abilities. Job Offer 57,924.07/annum (Inclusive of Shift allowance) Permanent position within the food manufacturing industry. Opportunities for career growth and professional development. Supportive work environment in Coventry. Comprehensive benefits package (Quarterly Bonus/Pension Scheme/Extended Family leave etc.
Apr 25, 2026
Full time
The Shift Engineer will play a key role in maintaining and improving production equipment within the food manufacturing industry. This permanent position is based in Coventry and involves ensuring the smooth operation of engineering and manufacturing processes. Client Details A medium-sized company within the food manufacturing industry, dedicated to providing high-quality products and services. They focus on maintaining a reliable and efficient production environment within their engineering and manufacturing department. Description Carry out planned preventative maintenance on machinery and equipment. Diagnose and resolve mechanical and electrical faults efficiently. Ensure all machinery is operating at optimum performance levels. Assist with the installation and commissioning of new equipment. Maintain accurate records of maintenance and repair activities. Adhere to health and safety regulations at all times. Work collaboratively with the production team to minimise downtime. Provide technical support and guidance to colleagues as needed. 4 on 4 off (2D2N) - 12 Hours Profile You will be an experience Maintenance Engineer, ideally with experience in a manufacturing environment, along with: Relevant qualifications in engineering or a related field. Experience in mechanical and electrical maintenance. Knowledge of health and safety practices in an engineering environment. Strong problem-solving skills and attention to detail. Ability to work effectively in a fast-paced manufacturing setting. Excellent communication and teamwork abilities. Job Offer 57,924.07/annum (Inclusive of Shift allowance) Permanent position within the food manufacturing industry. Opportunities for career growth and professional development. Supportive work environment in Coventry. Comprehensive benefits package (Quarterly Bonus/Pension Scheme/Extended Family leave etc.
Are you an experienced Automation Engineer with a thirst for travel, looking for an amazing opportunity to be integral in the growth of our business by being responsible for the programming, testing and commissioning of our controls systems in our newly acquired or newly built sites around the world? At Saint-Gobain we are looking for an Automation Engineer to work in our Technical Production team, helping to deliver multi-million-pound projects across the globe. You'll be working as part of a small team based out of our East Leake headquarters and will be working on projects abroad for an average of half the year. Some of our recent project locations include France, Spain, Canada and the USA, therefore this role is truly the perfect way to combine your passions of travel and engineering! The Automation Engineer will specifically lead the safe implementation of capital projects for the thermal processes in our plants including programming, testing and commissioning on multi-million-pound projects globally. The Automation Engineer will be a crucial part of a technically minded world class engineering team and will be responsible for the management of their own exciting portfolio of projects, liaising with several key departments and key stakeholders cross-functionally. This is a challenging role where there will be international travel to oversee the various stages, handover of finalised projects and ongoing technical mentoring. It's a fantastic opportunity to make your mark on some of our upcoming best in class manufacturing facility projects in a vital cog in the Saint Gobain business model. Saint-Gobain designs, manufactures and distributes materials and services for the construction and industrial markets. These solutions are found everywhere in our living places and our daily life: in buildings, transportation, infrastructure and in many industrial applications. They provide comfort, performance and sustainability while meeting the challenges of the decarbonization of the world of construction and industry, the preservation of resources and rapid urbanisation. To be successful in your application you'll need to live within a commutable distance from our East Leake office but be flexible to travel globally. In return for your expertise and flexibility we're offering a competitive salary plus bonus, pension and many other benefits too, including healthcare options. You'll also get an allowance for your time abroad. What we're looking for: Ideally degree educated in Controls, Electrical Engineering or a comparable discipline Project management experience, dealing with capex investments Previous experience in programming, installation and testing of new PLC controls systems (Siemens/Rockwell) Proven experience in Process Automation, ideally relating to thermal processes in a manufacturing environment Experience with CI and WCM methodologies A collaborative style of work with the ability to liaise with stakeholders, suppliers and wider teams Presentation and communication skills, you'll be delivering training to our local teams What you'll be doing: Support Project Managers on major projects undertaken by GMT worldwide or existing operations to deliver installations on time and to budget Delivery of solutions for the best performance at lowest cost giving due regard to safety, operability, maintainability etc. Ensure efficient handover of projects ensuring full documentation, training, support and then provide support to operating plants on our global projects Scope and develop initial designs and layouts for capital projects, and then expand them into detailed plans and drawings providing feasibility studies, specifications and budget estimates for capital schemes right to commissioning of new equipment and processes Is Saint-Gobain an inclusive employer? Saint-Gobain is a worldwide leader in light and sustainable construction, following our purpose of 'Making the World a Better Home'. We play a part in improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role. Whilst we can't promise to meet every request when we're recruiting, we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you!
Apr 25, 2026
Full time
Are you an experienced Automation Engineer with a thirst for travel, looking for an amazing opportunity to be integral in the growth of our business by being responsible for the programming, testing and commissioning of our controls systems in our newly acquired or newly built sites around the world? At Saint-Gobain we are looking for an Automation Engineer to work in our Technical Production team, helping to deliver multi-million-pound projects across the globe. You'll be working as part of a small team based out of our East Leake headquarters and will be working on projects abroad for an average of half the year. Some of our recent project locations include France, Spain, Canada and the USA, therefore this role is truly the perfect way to combine your passions of travel and engineering! The Automation Engineer will specifically lead the safe implementation of capital projects for the thermal processes in our plants including programming, testing and commissioning on multi-million-pound projects globally. The Automation Engineer will be a crucial part of a technically minded world class engineering team and will be responsible for the management of their own exciting portfolio of projects, liaising with several key departments and key stakeholders cross-functionally. This is a challenging role where there will be international travel to oversee the various stages, handover of finalised projects and ongoing technical mentoring. It's a fantastic opportunity to make your mark on some of our upcoming best in class manufacturing facility projects in a vital cog in the Saint Gobain business model. Saint-Gobain designs, manufactures and distributes materials and services for the construction and industrial markets. These solutions are found everywhere in our living places and our daily life: in buildings, transportation, infrastructure and in many industrial applications. They provide comfort, performance and sustainability while meeting the challenges of the decarbonization of the world of construction and industry, the preservation of resources and rapid urbanisation. To be successful in your application you'll need to live within a commutable distance from our East Leake office but be flexible to travel globally. In return for your expertise and flexibility we're offering a competitive salary plus bonus, pension and many other benefits too, including healthcare options. You'll also get an allowance for your time abroad. What we're looking for: Ideally degree educated in Controls, Electrical Engineering or a comparable discipline Project management experience, dealing with capex investments Previous experience in programming, installation and testing of new PLC controls systems (Siemens/Rockwell) Proven experience in Process Automation, ideally relating to thermal processes in a manufacturing environment Experience with CI and WCM methodologies A collaborative style of work with the ability to liaise with stakeholders, suppliers and wider teams Presentation and communication skills, you'll be delivering training to our local teams What you'll be doing: Support Project Managers on major projects undertaken by GMT worldwide or existing operations to deliver installations on time and to budget Delivery of solutions for the best performance at lowest cost giving due regard to safety, operability, maintainability etc. Ensure efficient handover of projects ensuring full documentation, training, support and then provide support to operating plants on our global projects Scope and develop initial designs and layouts for capital projects, and then expand them into detailed plans and drawings providing feasibility studies, specifications and budget estimates for capital schemes right to commissioning of new equipment and processes Is Saint-Gobain an inclusive employer? Saint-Gobain is a worldwide leader in light and sustainable construction, following our purpose of 'Making the World a Better Home'. We play a part in improving daily life through high-performance solutions. From wherever you are, let your unique personality and our values guide you every day to invent a more sustainable world. We understand that a diverse workplace is not only a more enjoyable place to be, but also facilitates better decision making and innovation. So, whoever you are, and whichever Saint-Gobain business you join, you can be sure of a warm welcome with us. And what about flexibility? At Saint-Gobain, we're always open to new ways of working. Everyone has different needs and commitments. We'll happily discuss any need you might have for this role. Whilst we can't promise to meet every request when we're recruiting, we do promise to listen. If you match our criteria, we will be in touch to discuss your experience and more about you as a person, we look forward to hearing from you!
CNC Millers and Turners opportunities with this small busy sub contract precision engineering company. The Roles For the turners we are seeking experienced CNC Turners - Setter/Programmer with Mazak , Mazatrol and fanuc experience producing low-volume batch work where each component is unique. You will be responsible for programming (online) setting, proving out and operating CNC lathes to ensure complex aerospace parts are produced accurately, efficiently and to tight tolerances. For the Millers we are looking for setter operators with metal machining experience on Haas (Fanuc) controls or Hurco machines. Key Responsibilities for all roles: Interpret complex technical/engineering drawings to develop machining strategies. Machine low-volume, high-precision aerospace parts from a range of exotic materials. Ensure all work meets tight tolerances and stringent quality standards. Carry out basic inspection to verify component conformity. Work collaboratively with engineers and quality teams to resolve manufacturing challenges. Company Overview This is working for an established aerospace precision engineering company supplying high quality, turnkey solutions to leading OEMs and tiered suppliers. With a strong reputation for craftsmanship and innovation, they specialise in low-volume, bespoke Aerospace components manufactured to exacting standards. What's on offer Standard Hours: Monday - Thursday 08:00-16:30, Friday 08:00-15:30 Overtime paid at 1.5 hourly rate. These are permanent jobs with starting salaries dependant on experience. This company is unable to offer visa sponsorship. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Apr 25, 2026
Full time
CNC Millers and Turners opportunities with this small busy sub contract precision engineering company. The Roles For the turners we are seeking experienced CNC Turners - Setter/Programmer with Mazak , Mazatrol and fanuc experience producing low-volume batch work where each component is unique. You will be responsible for programming (online) setting, proving out and operating CNC lathes to ensure complex aerospace parts are produced accurately, efficiently and to tight tolerances. For the Millers we are looking for setter operators with metal machining experience on Haas (Fanuc) controls or Hurco machines. Key Responsibilities for all roles: Interpret complex technical/engineering drawings to develop machining strategies. Machine low-volume, high-precision aerospace parts from a range of exotic materials. Ensure all work meets tight tolerances and stringent quality standards. Carry out basic inspection to verify component conformity. Work collaboratively with engineers and quality teams to resolve manufacturing challenges. Company Overview This is working for an established aerospace precision engineering company supplying high quality, turnkey solutions to leading OEMs and tiered suppliers. With a strong reputation for craftsmanship and innovation, they specialise in low-volume, bespoke Aerospace components manufactured to exacting standards. What's on offer Standard Hours: Monday - Thursday 08:00-16:30, Friday 08:00-15:30 Overtime paid at 1.5 hourly rate. These are permanent jobs with starting salaries dependant on experience. This company is unable to offer visa sponsorship. HRGO are a recruitment agency supporting UK Manufacturing. We aim to respond to all applications.
Our client, a leading automotive manufacturing business, is looking for an experienced Technical Engineer / Automation Engineer / Controls Engineer to support advanced automated production lines. The successful candidate will have a strong background in complex manufacturing environments and a proven ability to deliver technical solutions across automated processes. Contract - Outside IR35 or PERM available. Flexible hourly rates - initial 6-month contract with strong potential for extension Salary dependant on experience Monday to Thursday 8am - 5pm, Friday 8am - 2pmBirminghamSite based Technical Engineer / Automation Engineer / Controls Engineer Job Description Act as the technical lead for automated manufacturing processes across multiple production stages. Work with internal teams, customers, and suppliers to deliver efficient and high-quality manufacturing solutions. Develop quality systems, define FAT/SAT criteria, and resolve shop floor/process issues. Support new production line development, technology selection, and process optimisation. Lead problem-solving activities and contribute to continuous improvement initiatives. Technical Engineer / Automation Engineer / Controls Engineer Essential Skills / Experience / Qualifications 5+ years' experience in automated manufacturing environments Strong analytical and problem-solving skills Experience with PLCs (Siemens, Beckhoff) Understanding of continuous processes, materials conversion, and packaging Ability to communicate technical information clearly and work in fast-paced environments Full UK driving licence Desirable: Knowledge of IATF 16949 and ISO 9001FMCG experience Technical Engineer / Automation Engineer / Controls Engineer Company Benefits Flexible contract (Outside IR35)Competitive ratesLong-term opportunitiesWork on advanced automotive manufacturing projects
Apr 25, 2026
Contractor
Our client, a leading automotive manufacturing business, is looking for an experienced Technical Engineer / Automation Engineer / Controls Engineer to support advanced automated production lines. The successful candidate will have a strong background in complex manufacturing environments and a proven ability to deliver technical solutions across automated processes. Contract - Outside IR35 or PERM available. Flexible hourly rates - initial 6-month contract with strong potential for extension Salary dependant on experience Monday to Thursday 8am - 5pm, Friday 8am - 2pmBirminghamSite based Technical Engineer / Automation Engineer / Controls Engineer Job Description Act as the technical lead for automated manufacturing processes across multiple production stages. Work with internal teams, customers, and suppliers to deliver efficient and high-quality manufacturing solutions. Develop quality systems, define FAT/SAT criteria, and resolve shop floor/process issues. Support new production line development, technology selection, and process optimisation. Lead problem-solving activities and contribute to continuous improvement initiatives. Technical Engineer / Automation Engineer / Controls Engineer Essential Skills / Experience / Qualifications 5+ years' experience in automated manufacturing environments Strong analytical and problem-solving skills Experience with PLCs (Siemens, Beckhoff) Understanding of continuous processes, materials conversion, and packaging Ability to communicate technical information clearly and work in fast-paced environments Full UK driving licence Desirable: Knowledge of IATF 16949 and ISO 9001FMCG experience Technical Engineer / Automation Engineer / Controls Engineer Company Benefits Flexible contract (Outside IR35)Competitive ratesLong-term opportunitiesWork on advanced automotive manufacturing projects
What Are We Looking For? Our Asset Operations and Maintenance Team are looking to recruit a Health and Safety Advisor to join our team on a permanent basis, based in Muir of Ord. Your role will involve ensuring that all RSE companies activities are carried out in accordance with all relevant Health and Safety legislation and that all persons affected either directly or indirectly are not subjected to avoidable risks. Please note this position will require flexibility on working location, with accommodation provided by RSE. Some of Your Key Duties Include: Ensure that all activities are carried out in compliance with RSE s Health and Safety, Quality and Environmental management systems Ensure that where appropriate, all requirements under the current CDM regulations are satisfied Including assisting project teams in compiling Construction Phase Plans. Provide assistance on all matters related to QHSE issues to departments and individuals within the Ross-shire engineering group of companies as and when required under the day-to-day direction of the Health & Safety Manager Carry out QHSE inspections and/or audits both at the RSE companies premises, and construction sites, as directed by the Health & Safety Manager to ensure that all activities are carried out in a safe manner and that persons are not placed in a hazardous environment Complete relevant QHSE inspection and/or audit reports highlighting any issues/nonconformance and issue the report to the relevant Project Engineer/Project Manager/Site Manager and to the QHSE Managers and the Company Directors Assist and advise Engineers/Site Managers as appropriate with the preparation of Health & Safety risk assessments and matters of safe working and compliance as required Produce COSHH assessments as required Communicate and liaise fully with all departments within the business What Do You Need? NEBOSH general (Level 3) essential (or working towards) Practical understanding and approach to managing QHSE, with a focus on building relationships with delivery teams Excellent communication skills, both written and verbal Sound knowledge of Health & Safety legislation Experience in the application of Health & Safety practices in both manufacturing and construction sites. Utilities experience highly advantageous. Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go Company Van Private Healthcare (Personal) Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
Apr 25, 2026
Full time
What Are We Looking For? Our Asset Operations and Maintenance Team are looking to recruit a Health and Safety Advisor to join our team on a permanent basis, based in Muir of Ord. Your role will involve ensuring that all RSE companies activities are carried out in accordance with all relevant Health and Safety legislation and that all persons affected either directly or indirectly are not subjected to avoidable risks. Please note this position will require flexibility on working location, with accommodation provided by RSE. Some of Your Key Duties Include: Ensure that all activities are carried out in compliance with RSE s Health and Safety, Quality and Environmental management systems Ensure that where appropriate, all requirements under the current CDM regulations are satisfied Including assisting project teams in compiling Construction Phase Plans. Provide assistance on all matters related to QHSE issues to departments and individuals within the Ross-shire engineering group of companies as and when required under the day-to-day direction of the Health & Safety Manager Carry out QHSE inspections and/or audits both at the RSE companies premises, and construction sites, as directed by the Health & Safety Manager to ensure that all activities are carried out in a safe manner and that persons are not placed in a hazardous environment Complete relevant QHSE inspection and/or audit reports highlighting any issues/nonconformance and issue the report to the relevant Project Engineer/Project Manager/Site Manager and to the QHSE Managers and the Company Directors Assist and advise Engineers/Site Managers as appropriate with the preparation of Health & Safety risk assessments and matters of safe working and compliance as required Produce COSHH assessments as required Communicate and liaise fully with all departments within the business What Do You Need? NEBOSH general (Level 3) essential (or working towards) Practical understanding and approach to managing QHSE, with a focus on building relationships with delivery teams Excellent communication skills, both written and verbal Sound knowledge of Health & Safety legislation Experience in the application of Health & Safety practices in both manufacturing and construction sites. Utilities experience highly advantageous. Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. A flexible career development path, with no restrictions on where your career can go Company Van Private Healthcare (Personal) Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now.
A leading defense engineering firm in Rosyth seeks a Project Manager to lead innovative projects that enhance national security. You will manage integrated teams, ensure effective communication with stakeholders, and mitigate project risks. Candidates should have relevant degrees, project management qualifications, and experience in manufacturing or nuclear projects is preferred. The role offers generous benefits including holidays, pension schemes, and health consultations, along with a hybrid work model.
Apr 25, 2026
Full time
A leading defense engineering firm in Rosyth seeks a Project Manager to lead innovative projects that enhance national security. You will manage integrated teams, ensure effective communication with stakeholders, and mitigate project risks. Candidates should have relevant degrees, project management qualifications, and experience in manufacturing or nuclear projects is preferred. The role offers generous benefits including holidays, pension schemes, and health consultations, along with a hybrid work model.
What Are We Looking For? Our Asset Operations and Maintenance Team is looking to recruit a Health & Safety Manager to join on a permanent basis, working from Muir of Ord. Your role will involve ensuring that all RSE companies activities are carried out in accordance with all relevant Health and Safety legislation and that all persons affected either directly or indirectly are not subjected to avoidable risks. Please note owing to the nature of this role, and location of works, this position will require travel across Scotland. Some of Your Key Duties Include: Ensure that all activities are carried out in compliance with RSE s Health and Safety, Quality and Environmental management systems Ensure that where appropriate, all requirements under the current CDM regulations are satisfied Including assisting project teams in compiling Construction Phase Plans Provide assistance on all matters related to QHSE issues to departments and individuals within the Ross-shire engineering group of companies as and when required under the day-to-day direction of the Health & Safety Manager Carry out QHSE inspections and/or audits both at the RSE companies premises, and construction sites, as directed by the Health & Safety Manager to ensure that all activities are carried out in a safe manner and that persons are not placed in a hazardous environment Complete relevant QHSE inspection and/or audit reports highlighting any issues/nonconformance and issue the report to the relevant Project Engineer/Project Manager/Site Manager and to the QHSE Managers and the Company Directors Assist and advise Engineers/Site Managers as appropriate with the preparation of Health & Safety risk assessments and matters of safe working and compliance as required Produce COSHH assessments as required Communicate and liaise fully with all departments within the business What Do You Need? NEBOSH general (Level 3) essential (or working towards) Practical understanding and approach to managing QHSE, with a focus on building relationships with delivery teams Excellent communication skills, both written and verbal Sound knowledge of Health & Safety legislation Experience in the application of Health & Safety practices in both manufacturing and construction sites. Utilities experience highly advantageous. Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. Private Healthcare (Personal) Car allowance or company van A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now
Apr 25, 2026
Full time
What Are We Looking For? Our Asset Operations and Maintenance Team is looking to recruit a Health & Safety Manager to join on a permanent basis, working from Muir of Ord. Your role will involve ensuring that all RSE companies activities are carried out in accordance with all relevant Health and Safety legislation and that all persons affected either directly or indirectly are not subjected to avoidable risks. Please note owing to the nature of this role, and location of works, this position will require travel across Scotland. Some of Your Key Duties Include: Ensure that all activities are carried out in compliance with RSE s Health and Safety, Quality and Environmental management systems Ensure that where appropriate, all requirements under the current CDM regulations are satisfied Including assisting project teams in compiling Construction Phase Plans Provide assistance on all matters related to QHSE issues to departments and individuals within the Ross-shire engineering group of companies as and when required under the day-to-day direction of the Health & Safety Manager Carry out QHSE inspections and/or audits both at the RSE companies premises, and construction sites, as directed by the Health & Safety Manager to ensure that all activities are carried out in a safe manner and that persons are not placed in a hazardous environment Complete relevant QHSE inspection and/or audit reports highlighting any issues/nonconformance and issue the report to the relevant Project Engineer/Project Manager/Site Manager and to the QHSE Managers and the Company Directors Assist and advise Engineers/Site Managers as appropriate with the preparation of Health & Safety risk assessments and matters of safe working and compliance as required Produce COSHH assessments as required Communicate and liaise fully with all departments within the business What Do You Need? NEBOSH general (Level 3) essential (or working towards) Practical understanding and approach to managing QHSE, with a focus on building relationships with delivery teams Excellent communication skills, both written and verbal Sound knowledge of Health & Safety legislation Experience in the application of Health & Safety practices in both manufacturing and construction sites. Utilities experience highly advantageous. Full UK Driving Licence Who Are We? RSE is a trusted clean water technology company, developing market-leading products and solutions for purifying drinking water, recycling wastewater, and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. RSE provides offsite modular build solutions using a low-carbon approach compared to traditional construction methods and our unique offering to the market focuses on innovation, efficiency, and excellence. Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. We additionally have one of the largest servicing and maintenance teams in the market, to ensure we re on hand for all our clients needs. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What RSE Offer To build successful teams and drive the level of quality that RSE is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in an innovative and fast-paced environment. At RSE, you ll be given every opportunity to set the path of your own career through our Business Streams and work within dynamic teams that will require you to rise to the challenge of working for a market leader. Industry-leading salary based on your experience. Private Healthcare (Personal) Car allowance or company van A flexible career development path, with no restrictions on where your career can go. Holiday Allowance of 31 days per year, rising to 33 days per year after 2 years service. Holiday Buy / Sell Scheme Company Pension Scheme Cycle to Work Discounted National Gym Membership Professional Fees Paid Employee Discount Platform EV/Hybrid Car Lease Scheme Access to our network of health professionals including mental health champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe by leading transformation in the industry our offering to the market means our people have the space to thrive. If you re interested in a career with a company that will harness your skills and provide you with the support to create your own future within the water industry, apply now
Database Engineer Chard - (Hybrid 3 days in office) 28,000 - 38,000 + Bonus Scheme + Flexible Working Hours + Holiday + Training + Pension+ Health Insurance + Benefits Are you looking to take ownership of ERP data structures and play a central role in developing accurate BOMs and product configurations for a leading furniture manufacturer? This is an opportunity to join a growing technical team where you will be responsible for building, maintaining and continuously improving the ERP database architecture that underpins all procurement, manufacturing and sustainability reporting. You will work closely with NPI, product development and engineering teams to ensure all product structures are accurate, efficient and scalable. You will use your experience with ERP/MRP systems, alongside strong product and manufacturing knowledge, to develop configurator-based structures and bespoke product data. You will also be responsible for accurate material library management and the environmental product sheet output. This role offers progression, technical development and the chance to make a tangible impact on business performance. The Role: Develop database content from single product structures to configurator-based BOMs. Create and maintain data for bespoke product requirements. Manage all product and component attributes to support procurement, manufacturing and sustainability. Maintain the material library and ensure accurate reporting. Produce accurate EPS outputs and contribute to continuous system improvements. The Person Experience in manufacturing within database creation, product development or engineering. Knowledge of Winman or similar ERP/MRP systems. Degree in Mechanical Engineering, Product Engineering or equivalent experience. Advanced Excel proficiency. Understanding of modern manufacturing and Lean principles. Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Apr 25, 2026
Full time
Database Engineer Chard - (Hybrid 3 days in office) 28,000 - 38,000 + Bonus Scheme + Flexible Working Hours + Holiday + Training + Pension+ Health Insurance + Benefits Are you looking to take ownership of ERP data structures and play a central role in developing accurate BOMs and product configurations for a leading furniture manufacturer? This is an opportunity to join a growing technical team where you will be responsible for building, maintaining and continuously improving the ERP database architecture that underpins all procurement, manufacturing and sustainability reporting. You will work closely with NPI, product development and engineering teams to ensure all product structures are accurate, efficient and scalable. You will use your experience with ERP/MRP systems, alongside strong product and manufacturing knowledge, to develop configurator-based structures and bespoke product data. You will also be responsible for accurate material library management and the environmental product sheet output. This role offers progression, technical development and the chance to make a tangible impact on business performance. The Role: Develop database content from single product structures to configurator-based BOMs. Create and maintain data for bespoke product requirements. Manage all product and component attributes to support procurement, manufacturing and sustainability. Maintain the material library and ensure accurate reporting. Produce accurate EPS outputs and contribute to continuous system improvements. The Person Experience in manufacturing within database creation, product development or engineering. Knowledge of Winman or similar ERP/MRP systems. Degree in Mechanical Engineering, Product Engineering or equivalent experience. Advanced Excel proficiency. Understanding of modern manufacturing and Lean principles. Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Are you ready to take your career to the next level and make a tangible impact in the manufacturing industry? This is your chance to join a forward-thinking company that is renowned for its innovative solutions and commitment to excellence. As a Senior Manufacturing Engineer, you'll play a pivotal role in shaping design for manufacture, efficient processes and driving continuous improvement in a dynamic, fast-paced environment. If you're passionate about operational excellence and want to work on meaningful projects, this opportunity is not to be missed. What You Will Do: - Develop and manage Process Failure Mode and Effects Analyses (PFMEAs) to ensure robust manufacturing processes. - Create and maintain process flows, virtual builds, and technical instructions to optimise production efficiency. - Collaborate with the engineering team to design for manufacturability and assembly, incorporating poka-yoke principles. - Oversee timing and routing in SAP while reporting on key operational performance indicators (KPIs). - Lead 5S planning for manufacturing areas and manage capital expenditure (CAPEX) projects. - Drive continuous improvement initiatives and provide day-to-day engineering support to production teams. What You Will Bring: - A degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. - Experience with CAD and ERP/MRP systems, ideally SAP. - Proven expertise in a manufacturing or production engineering role, with a strong focus on Lean and Six Sigma principles. - Exceptional analytical and problem-solving skills, with a data-driven mindset. - Excellent communication skills and the ability to lead change management initiatives effectively. This role is integral to the company's mission of delivering durable and reliable solutions that meet and exceed rigorous industry standards. You will lead on Manufacturing Engineering activities and by optimising manufacturing processes, you'll contribute to the creation of products that provide unparalleled security and performance, ensuring long-term value for clients across a range of sectors. Location: Based in Stoke-on-Trent, this role is situated in a well-connected area with a rich industrial heritage, offering a vibrant work environment and excellent transport links. Interested?: If you're ready to step into a rewarding role as a Senior Manufacturing Engineer and make a lasting impact, don't wait-apply today and take the first step towards an exciting future! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 25, 2026
Full time
Are you ready to take your career to the next level and make a tangible impact in the manufacturing industry? This is your chance to join a forward-thinking company that is renowned for its innovative solutions and commitment to excellence. As a Senior Manufacturing Engineer, you'll play a pivotal role in shaping design for manufacture, efficient processes and driving continuous improvement in a dynamic, fast-paced environment. If you're passionate about operational excellence and want to work on meaningful projects, this opportunity is not to be missed. What You Will Do: - Develop and manage Process Failure Mode and Effects Analyses (PFMEAs) to ensure robust manufacturing processes. - Create and maintain process flows, virtual builds, and technical instructions to optimise production efficiency. - Collaborate with the engineering team to design for manufacturability and assembly, incorporating poka-yoke principles. - Oversee timing and routing in SAP while reporting on key operational performance indicators (KPIs). - Lead 5S planning for manufacturing areas and manage capital expenditure (CAPEX) projects. - Drive continuous improvement initiatives and provide day-to-day engineering support to production teams. What You Will Bring: - A degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a related field. - Experience with CAD and ERP/MRP systems, ideally SAP. - Proven expertise in a manufacturing or production engineering role, with a strong focus on Lean and Six Sigma principles. - Exceptional analytical and problem-solving skills, with a data-driven mindset. - Excellent communication skills and the ability to lead change management initiatives effectively. This role is integral to the company's mission of delivering durable and reliable solutions that meet and exceed rigorous industry standards. You will lead on Manufacturing Engineering activities and by optimising manufacturing processes, you'll contribute to the creation of products that provide unparalleled security and performance, ensuring long-term value for clients across a range of sectors. Location: Based in Stoke-on-Trent, this role is situated in a well-connected area with a rich industrial heritage, offering a vibrant work environment and excellent transport links. Interested?: If you're ready to step into a rewarding role as a Senior Manufacturing Engineer and make a lasting impact, don't wait-apply today and take the first step towards an exciting future! Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
We are currently recruiting for skilled FCAW (Flux Core) Welders to join a major defence project. This role is heavily focused on Flux Core (MAG) welding using ceramic tile backing, working to high specifications on critical components. This is an excellent opportunity for experienced FCAW welders to work on advanced engineering builds within a safety-critical environment. We are ideally searching for Welders who are SC Cleared already, but you must be born British for the level of clearance required for this contract. Key Responsibilities Perform FCAW / MAG welding (primary process) using ceramic tile backing Weld butts and fillets to a high standard on carbon steel Ensure all welds meet visual inspection and NDE standards Carry out self-verification of weld quality Work from engineering drawings and welding procedures Maintain correct welding parameters, sequencing, and technique Adhere to all SHE requirements, including fume control and safe systems of work Skills & Experience Required Modern Apprenticeship / Trade Papers NVQ / SVQ 3 or equivalent (essential) Strong, proven experience in FCAW / Flux Core welding Experience using ceramic tiles/backing (highly desirable) Ability to consistently produce welds that pass NDE inspection Experience welding carbon steel (4-10mm thickness range) Knowledge of MCAW consumables Experience working in heavy manufacturing, shipbuilding, or construction environments Good understanding of SHE and risk assessments Desirable Experience with additional processes (MIG, MMA, Sub Arc) Experience welding aluminium (MIG) Experience with automated or semi-automated welding equipment
Apr 25, 2026
Contractor
We are currently recruiting for skilled FCAW (Flux Core) Welders to join a major defence project. This role is heavily focused on Flux Core (MAG) welding using ceramic tile backing, working to high specifications on critical components. This is an excellent opportunity for experienced FCAW welders to work on advanced engineering builds within a safety-critical environment. We are ideally searching for Welders who are SC Cleared already, but you must be born British for the level of clearance required for this contract. Key Responsibilities Perform FCAW / MAG welding (primary process) using ceramic tile backing Weld butts and fillets to a high standard on carbon steel Ensure all welds meet visual inspection and NDE standards Carry out self-verification of weld quality Work from engineering drawings and welding procedures Maintain correct welding parameters, sequencing, and technique Adhere to all SHE requirements, including fume control and safe systems of work Skills & Experience Required Modern Apprenticeship / Trade Papers NVQ / SVQ 3 or equivalent (essential) Strong, proven experience in FCAW / Flux Core welding Experience using ceramic tiles/backing (highly desirable) Ability to consistently produce welds that pass NDE inspection Experience welding carbon steel (4-10mm thickness range) Knowledge of MCAW consumables Experience working in heavy manufacturing, shipbuilding, or construction environments Good understanding of SHE and risk assessments Desirable Experience with additional processes (MIG, MMA, Sub Arc) Experience welding aluminium (MIG) Experience with automated or semi-automated welding equipment
Job Role: SEO Copywriter Role type: Permanent Work Hours: 9 30 Monday-Friday Department: Digital Marketing Starting Salary: £27,000 £30,000 Are you a detail-oriented writer with an interest in understanding how things work, researching technical topics, and producing measurable results? We are on the hunt for someone with copywriting experience who can turn complex automotive systems into clear, informative content that performs in search. The Role: Your main objective will be to produce informative, engaging and accurate content that adheres to current SEO best practice and drives website traffic and conversions. You will work across SEO strategy and content creation, owning projects from research through to publication and working within structured workflows and templates. Demand for our ECU remanufacturing services is constantly growing and changing, with new opportunities being routinely identified in a fluid industry landscape. You will be responsible for understanding the market, identifying new opportunities, and building appropriate content in response to what you discover. Key Responsibilities: Conduct detailed market research and collect data to support product marketing strategies. Produce structured landing page proposals based on research findings. Develop a deep technical understanding of our service offering and internal processes to inform relevant content. Write clear, informative, and accurate technical content focused on automotive electronic systems. Translate complex technical information into easily digestible and engaging content for garages and technicians. Maintain current knowledge of SEO best practice and search engine algorithm changes to ensure content is always optimised and search engine rankings maximised. Proactively monitor and analyse content performance, making data-driven adjustments as required and sharing insight with the team. Desirable Skills and Experience: Proven copywriting experience, with a focus on SEO ideally within a technical subject area (automotive, engineering, electronics, science or similar). Experience with SEO tools (e.g., Ahrefs, SEMrush, Moz) and analytics platforms (e.g., Google Analytics, Google Search Console) is preferred. Strong research skills and ability to understand unfamiliar technical systems quickly. Excellent written English and attention to detail. Forward-thinking and prepared to generate and share ideas. Adaptable and excited by fast-paced growth and innovation in a rapidly evolving business. An interest in automotive technology and developing a deep technical understanding of our services. What We Will Offer You: A learning-centric environment where you can grow your skills in SEO and technical content writing. A supportive environment where creativity, collaboration and learning are encouraged. Access to funded training in SEO and digital marketing 32 days holiday per year, inclusive of bank holidays. Fully air-conditioned office. Free on-site parking. Unlimited barista-quality coffee. Recreation facilities (Full VR driving/gaming simulator/dart boards/pool tables). Free takeaway meal every Friday, named FAT FRIDAY by all the staff. Access to a fully equipped company gym. Birthday Gifts. Christmas party, fully paid for by the Managing Director. Annual team building days. Excellent in-house career development opportunities.
Apr 25, 2026
Full time
Job Role: SEO Copywriter Role type: Permanent Work Hours: 9 30 Monday-Friday Department: Digital Marketing Starting Salary: £27,000 £30,000 Are you a detail-oriented writer with an interest in understanding how things work, researching technical topics, and producing measurable results? We are on the hunt for someone with copywriting experience who can turn complex automotive systems into clear, informative content that performs in search. The Role: Your main objective will be to produce informative, engaging and accurate content that adheres to current SEO best practice and drives website traffic and conversions. You will work across SEO strategy and content creation, owning projects from research through to publication and working within structured workflows and templates. Demand for our ECU remanufacturing services is constantly growing and changing, with new opportunities being routinely identified in a fluid industry landscape. You will be responsible for understanding the market, identifying new opportunities, and building appropriate content in response to what you discover. Key Responsibilities: Conduct detailed market research and collect data to support product marketing strategies. Produce structured landing page proposals based on research findings. Develop a deep technical understanding of our service offering and internal processes to inform relevant content. Write clear, informative, and accurate technical content focused on automotive electronic systems. Translate complex technical information into easily digestible and engaging content for garages and technicians. Maintain current knowledge of SEO best practice and search engine algorithm changes to ensure content is always optimised and search engine rankings maximised. Proactively monitor and analyse content performance, making data-driven adjustments as required and sharing insight with the team. Desirable Skills and Experience: Proven copywriting experience, with a focus on SEO ideally within a technical subject area (automotive, engineering, electronics, science or similar). Experience with SEO tools (e.g., Ahrefs, SEMrush, Moz) and analytics platforms (e.g., Google Analytics, Google Search Console) is preferred. Strong research skills and ability to understand unfamiliar technical systems quickly. Excellent written English and attention to detail. Forward-thinking and prepared to generate and share ideas. Adaptable and excited by fast-paced growth and innovation in a rapidly evolving business. An interest in automotive technology and developing a deep technical understanding of our services. What We Will Offer You: A learning-centric environment where you can grow your skills in SEO and technical content writing. A supportive environment where creativity, collaboration and learning are encouraged. Access to funded training in SEO and digital marketing 32 days holiday per year, inclusive of bank holidays. Fully air-conditioned office. Free on-site parking. Unlimited barista-quality coffee. Recreation facilities (Full VR driving/gaming simulator/dart boards/pool tables). Free takeaway meal every Friday, named FAT FRIDAY by all the staff. Access to a fully equipped company gym. Birthday Gifts. Christmas party, fully paid for by the Managing Director. Annual team building days. Excellent in-house career development opportunities.
Principal Hardware Engineer - Near Edinburgh Hybrid - 65K plus Bonus Having placed a number of people into their team ourselves, Lorien's long standing client based near Edinburgh - a leader in their industry with a growing and consistently award-winning product line - have asked us to help them in their searches for a Principal Hardware Engineer to join their team on a permanent basis. Taking designs from initial concept stages to production, you'll be a driving force behind new ideas, contribute towards the ongoing improvements of key electronics and systems at the core of the product line, and work with a great team of Engineers while providing well-appreciated technical guidance. What's more, the products you'll work on improve the lives of millions of people across the globe, and so this is truly a rewarding opportunity, and everyone in the team feels part of that journey. Here's a snapshot of the duties involved: Getting to grips with everything from concept gen, analysis and development of new digital/analogue/mixed signal electronics as well as systems architecture Providing technical specs and other documentation Reviewing current and new designs (as well as helping less senior Engineers with theirs) Contributing to the firm's ongoing technical vision and roadmap, and identifying areas for improvement including new technologies Being a bridge between the hardware and product development teams, as well as ensuring 3rd parties deliver The kind of skills they're looking for: Strong background in digital and analogue electronics design and analysis, electronics assembly processes and testing approaches Background involving DFx (Design for Manufacturing, Assembly and Test) and EMC design Ability to work as part of a multidisciplinary team and with a focus on the customer's needs Enjoy working as part of a team, sharing knowledge and using your expertise to help others and improve current and future product offerings If you like what you've read so far, apply now with your latest CV for immediate consideration and let's have a chat Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Apr 25, 2026
Full time
Principal Hardware Engineer - Near Edinburgh Hybrid - 65K plus Bonus Having placed a number of people into their team ourselves, Lorien's long standing client based near Edinburgh - a leader in their industry with a growing and consistently award-winning product line - have asked us to help them in their searches for a Principal Hardware Engineer to join their team on a permanent basis. Taking designs from initial concept stages to production, you'll be a driving force behind new ideas, contribute towards the ongoing improvements of key electronics and systems at the core of the product line, and work with a great team of Engineers while providing well-appreciated technical guidance. What's more, the products you'll work on improve the lives of millions of people across the globe, and so this is truly a rewarding opportunity, and everyone in the team feels part of that journey. Here's a snapshot of the duties involved: Getting to grips with everything from concept gen, analysis and development of new digital/analogue/mixed signal electronics as well as systems architecture Providing technical specs and other documentation Reviewing current and new designs (as well as helping less senior Engineers with theirs) Contributing to the firm's ongoing technical vision and roadmap, and identifying areas for improvement including new technologies Being a bridge between the hardware and product development teams, as well as ensuring 3rd parties deliver The kind of skills they're looking for: Strong background in digital and analogue electronics design and analysis, electronics assembly processes and testing approaches Background involving DFx (Design for Manufacturing, Assembly and Test) and EMC design Ability to work as part of a multidisciplinary team and with a focus on the customer's needs Enjoy working as part of a team, sharing knowledge and using your expertise to help others and improve current and future product offerings If you like what you've read so far, apply now with your latest CV for immediate consideration and let's have a chat Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.
Sales Manager Capital Equipment - Food & FMCG Manufacturing Territory: UK & Ireland Location: Home-Based Pay: 60,000 - 70,000 (DOE) + Commission & Car Allowance The Opportunity SimWest is partnering with a specialist engineering company that designs and manufactures value-added capital equipment for the food manufacturing industry. Due to continued growth and strong demand from food producers across the UK and Ireland, the business is now looking to appoint an experienced Sales Manager to drive commercial growth within the territory. This is a home-based role with significant autonomy, where you will take ownership of the UK & Ireland sales territory and work closely with internal engineering teams to develop bespoke machinery solutions for food manufacturing customers. The role will focus on selling high-value capital equipment and engineered machinery, working consultatively with customers to understand their production challenges and deliver tailored solutions that improve efficiency, capacity and reliability. The Role The Sales Manager will be responsible for managing key customer relationships while also identifying and developing new business opportunities across the food manufacturing sector. You will work closely with production, engineering and senior leadership teams within customer organisations, positioning yourself as a trusted partner. Typical responsibilities include: Managing and developing relationships with food manufacturing and FMCG production businesses Identifying customer production challenges and proposing value-added machinery and automation solutions Selling capital equipment projects and bespoke engineered systems Managing the full sales lifecycle from initial enquiry through to order Working closely with internal engineering teams to translate customer requirements into technical proposals Developing new opportunities within existing accounts while identifying new customers within the territory Maintaining regular contact with key decision makers including Engineering Managers, Factory Managers, Operations Directors and Managing Directors Travelling across the UK & Ireland to visit customer sites About You To be successful in this role you will be a commercially driven sales professional with a proven track record of selling value-added capital equipment or engineered machinery into manufacturing environments. You will be comfortable discussing technical concepts with engineering teams while also demonstrating the commercial value of proposed solutions. Key experience required: Proven experience selling capital equipment or bespoke machinery Experience selling into food manufacturing or FMCG production environments A strong background in technical sales, account management or business development Experience selling value-added engineered solutions rather than catalogue products Ability to communicate confidently with engineering, production and senior leadership teams Strong commercial awareness and ability to manage longer sales cycles Self-motivated and comfortable managing a home-based territory role Experience selling equipment such as processing machinery, automation systems, packaging machinery or other engineered capital equipment would be highly advantageous. This role covers the UK & Ireland, and while it would be particularly well-suited to someone based in the Midlands, North West, Yorkshire, or South West, we would still be keen to hear from strong candidates located elsewhere who are happy to travel as required. Package 60,000 - 70,000 basic salary (salary level dependent on experience) Commission scheme linked to sales value Car allowance Home-based role Established customer base within the food manufacturing sector Long-term opportunity within a specialist engineering business Apply If you have experience selling capital equipment or value-added machinery to food or FMCG manufacturers and are looking for a role with genuine autonomy and long-term opportunity, we would be keen to speak with you.
Apr 25, 2026
Full time
Sales Manager Capital Equipment - Food & FMCG Manufacturing Territory: UK & Ireland Location: Home-Based Pay: 60,000 - 70,000 (DOE) + Commission & Car Allowance The Opportunity SimWest is partnering with a specialist engineering company that designs and manufactures value-added capital equipment for the food manufacturing industry. Due to continued growth and strong demand from food producers across the UK and Ireland, the business is now looking to appoint an experienced Sales Manager to drive commercial growth within the territory. This is a home-based role with significant autonomy, where you will take ownership of the UK & Ireland sales territory and work closely with internal engineering teams to develop bespoke machinery solutions for food manufacturing customers. The role will focus on selling high-value capital equipment and engineered machinery, working consultatively with customers to understand their production challenges and deliver tailored solutions that improve efficiency, capacity and reliability. The Role The Sales Manager will be responsible for managing key customer relationships while also identifying and developing new business opportunities across the food manufacturing sector. You will work closely with production, engineering and senior leadership teams within customer organisations, positioning yourself as a trusted partner. Typical responsibilities include: Managing and developing relationships with food manufacturing and FMCG production businesses Identifying customer production challenges and proposing value-added machinery and automation solutions Selling capital equipment projects and bespoke engineered systems Managing the full sales lifecycle from initial enquiry through to order Working closely with internal engineering teams to translate customer requirements into technical proposals Developing new opportunities within existing accounts while identifying new customers within the territory Maintaining regular contact with key decision makers including Engineering Managers, Factory Managers, Operations Directors and Managing Directors Travelling across the UK & Ireland to visit customer sites About You To be successful in this role you will be a commercially driven sales professional with a proven track record of selling value-added capital equipment or engineered machinery into manufacturing environments. You will be comfortable discussing technical concepts with engineering teams while also demonstrating the commercial value of proposed solutions. Key experience required: Proven experience selling capital equipment or bespoke machinery Experience selling into food manufacturing or FMCG production environments A strong background in technical sales, account management or business development Experience selling value-added engineered solutions rather than catalogue products Ability to communicate confidently with engineering, production and senior leadership teams Strong commercial awareness and ability to manage longer sales cycles Self-motivated and comfortable managing a home-based territory role Experience selling equipment such as processing machinery, automation systems, packaging machinery or other engineered capital equipment would be highly advantageous. This role covers the UK & Ireland, and while it would be particularly well-suited to someone based in the Midlands, North West, Yorkshire, or South West, we would still be keen to hear from strong candidates located elsewhere who are happy to travel as required. Package 60,000 - 70,000 basic salary (salary level dependent on experience) Commission scheme linked to sales value Car allowance Home-based role Established customer base within the food manufacturing sector Long-term opportunity within a specialist engineering business Apply If you have experience selling capital equipment or value-added machinery to food or FMCG manufacturers and are looking for a role with genuine autonomy and long-term opportunity, we would be keen to speak with you.
